| #! /usr/bin/env sh |
| |
| # all.sh |
| # |
| # Copyright The Mbed TLS Contributors |
| # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| # |
| # This file is provided under the Apache License 2.0, or the |
| # GNU General Public License v2.0 or later. |
| # |
| # ********** |
| # Apache License 2.0: |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may |
| # not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| # ********** |
| # |
| # ********** |
| # GNU General Public License v2.0 or later: |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License along |
| # with this program; if not, write to the Free Software Foundation, Inc., |
| # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # ********** |
| |
| |
| |
| ################################################################ |
| #### Documentation |
| ################################################################ |
| |
| # Purpose |
| # ------- |
| # |
| # To run all tests possible or available on the platform. |
| # |
| # Notes for users |
| # --------------- |
| # |
| # Warning: the test is destructive. It includes various build modes and |
| # configurations, and can and will arbitrarily change the current CMake |
| # configuration. The following files must be committed into git: |
| # * include/mbedtls/config.h |
| # * Makefile, library/Makefile, programs/Makefile, tests/Makefile |
| # After running this script, the CMake cache will be lost and CMake |
| # will no longer be initialised. |
| # |
| # The script assumes the presence of a number of tools: |
| # * Basic Unix tools (Windows users note: a Unix-style find must be before |
| # the Windows find in the PATH) |
| # * Perl |
| # * GNU Make |
| # * CMake |
| # * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind) |
| # * arm-gcc and mingw-gcc |
| # * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc |
| # * Yotta build dependencies, unless invoked with --no-yotta |
| # * OpenSSL and GnuTLS command line tools, recent enough for the |
| # interoperability tests. If they don't support SSLv3 then a legacy |
| # version of these tools must be present as well (search for LEGACY |
| # below). |
| # See the invocation of check_tools below for details. |
| # |
| # This script must be invoked from the toplevel directory of a git |
| # working copy of Mbed TLS. |
| # |
| # Note that the output is not saved. You may want to run |
| # script -c tests/scripts/all.sh |
| # or |
| # tests/scripts/all.sh >all.log 2>&1 |
| # |
| # Notes for maintainers |
| # --------------------- |
| # |
| # The bulk of the code is organized into functions that follow one of the |
| # following naming conventions: |
| # * pre_XXX: things to do before running the tests, in order. |
| # * component_XXX: independent components. They can be run in any order. |
| # * component_check_XXX: quick tests that aren't worth parallelizing. |
| # * component_build_XXX: build things but don't run them. |
| # * component_test_XXX: build and test. |
| # * support_XXX: if support_XXX exists and returns false then |
| # component_XXX is not run by default. |
| # * post_XXX: things to do after running the tests. |
| # * other: miscellaneous support functions. |
| # |
| # Each component must start by invoking `msg` with a short informative message. |
| # |
| # The framework performs some cleanup tasks after each component. This |
| # means that components can assume that the working directory is in a |
| # cleaned-up state, and don't need to perform the cleanup themselves. |
| # * Run `make clean`. |
| # * Restore `include/mbedtks/config.h` from a backup made before running |
| # the component. |
| # * Check out `Makefile`, `library/Makefile`, `programs/Makefile` and |
| # `tests/Makefile` from git. This cleans up after an in-tree use of |
| # CMake. |
| # |
| # Any command that is expected to fail must be protected so that the |
| # script keeps running in --keep-going mode despite `set -e`. In keep-going |
| # mode, if a protected command fails, this is logged as a failure and the |
| # script will exit with a failure status once it has run all components. |
| # Commands can be protected in any of the following ways: |
| # * `make` is a function which runs the `make` command with protection. |
| # Note that you must write `make VAR=value`, not `VAR=value make`, |
| # because the `VAR=value make` syntax doesn't work with functions. |
| # * Put `report_status` before the command to protect it. |
| # * Put `if_build_successful` before a command. This protects it, and |
| # additionally skips it if a prior invocation of `make` in the same |
| # component failed. |
| # |
| # The tests are roughly in order from fastest to slowest. This doesn't |
| # have to be exact, but in general you should add slower tests towards |
| # the end and fast checks near the beginning. |
| |
| |
| |
| ################################################################ |
| #### Initialization and command line parsing |
| ################################################################ |
| |
| # Abort on errors (and uninitialised variables) |
| set -eu |
| |
| pre_check_environment () { |
| if [ -d library -a -d include -a -d tests ]; then :; else |
| echo "Must be run from mbed TLS root" >&2 |
| exit 1 |
| fi |
| } |
| |
| pre_initialize_variables () { |
| CONFIG_H='include/mbedtls/config.h' |
| CONFIG_BAK="$CONFIG_H.bak" |
| |
| MEMORY=0 |
| FORCE=0 |
| QUIET=0 |
| KEEP_GOING=0 |
| YOTTA=1 |
| |
| # Seed value used with the --release-test option. |
| # |
| # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if |
| # both values are kept in sync. If you change the value here because it |
| # breaks some tests, you'll definitely want to change it in |
| # basic-build-test.sh as well. |
| RELEASE_SEED=1 |
| |
| # Default commands, can be overridden by the environment |
| : ${OPENSSL:="openssl"} |
| : ${OPENSSL_LEGACY:="$OPENSSL"} |
| : ${GNUTLS_CLI:="gnutls-cli"} |
| : ${GNUTLS_SERV:="gnutls-serv"} |
| : ${GNUTLS_LEGACY_CLI:="$GNUTLS_CLI"} |
| : ${GNUTLS_LEGACY_SERV:="$GNUTLS_SERV"} |
| : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build} |
| : ${ARMC5_BIN_DIR:=/usr/bin} |
| : ${ARMC6_BIN_DIR:=/usr/bin} |
| : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-} |
| |
| # if MAKEFLAGS is not set add the -j option to speed up invocations of make |
| if [ -z "${MAKEFLAGS+set}" ]; then |
| export MAKEFLAGS="-j" |
| fi |
| |
| # CFLAGS and LDFLAGS for Asan builds that don't use CMake |
| ASAN_CFLAGS='-Werror -Wall -Wextra -fsanitize=address,undefined -fno-sanitize-recover=all' |
| |
| # Gather the list of available components. These are the functions |
| # defined in this script whose name starts with "component_". |
| # Parse the script with sed, because in sh there is no way to list |
| # defined functions. |
| ALL_COMPONENTS=$(sed -n 's/^ *component_\([0-9A-Z_a-z]*\) *().*/\1/p' <"$0") |
| |
| # Exclude components that are not supported on this platform. |
| SUPPORTED_COMPONENTS= |
| for component in $ALL_COMPONENTS; do |
| case $(type "support_$component" 2>&1) in |
| *' function'*) |
| if ! support_$component; then continue; fi;; |
| esac |
| SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component" |
| done |
| } |
| |
| # Test whether the component $1 is included in the command line patterns. |
| is_component_included() |
| { |
| set -f |
| for pattern in $COMMAND_LINE_COMPONENTS; do |
| set +f |
| case ${1#component_} in $pattern) return 0;; esac |
| done |
| set +f |
| return 1 |
| } |
| |
| usage() |
| { |
| cat <<EOF |
| Usage: $0 [OPTION]... [COMPONENT]... |
| Run mbedtls release validation tests. |
| By default, run all tests. With one or more COMPONENT, run only those. |
| COMPONENT can be the name of a component or a shell wildcard pattern. |
| |
| Examples: |
| $0 "check_*" |
| Run all sanity checks. |
| $0 --no-armcc --except test_memsan |
| Run everything except builds that require armcc and MemSan. |
| |
| Special options: |
| -h|--help Print this help and exit. |
| --list-all-components List all available test components and exit. |
| --list-components List components supported on this platform and exit. |
| |
| General options: |
| -q|--quiet Only output component names, and errors if any. |
| -f|--force Force the tests to overwrite any modified files. |
| -k|--keep-going Run all tests and report errors at the end. |
| -m|--memory Additional optional memory tests. |
| --arm-none-eabi-gcc-prefix=<string> |
| Prefix for a cross-compiler for arm-none-eabi |
| (default: "${ARM_NONE_EABI_GCC_PREFIX}") |
| --armcc Run ARM Compiler builds (on by default). |
| --except Exclude the COMPONENTs listed on the command line, |
| instead of running only those. |
| --no-armcc Skip ARM Compiler builds. |
| --no-force Refuse to overwrite modified files (default). |
| --no-keep-going Stop at the first error (default). |
| --no-memory No additional memory tests (default). |
| --no-yotta Skip yotta module build. |
| --no-quiet Print full ouput from components. |
| --out-of-source-dir=<path> Directory used for CMake out-of-source build tests. |
| --random-seed Use a random seed value for randomized tests (default). |
| -r|--release-test Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}. |
| -s|--seed Integer seed value to use for this test run. |
| --yotta Build yotta module (on by default). |
| |
| Tool path options: |
| --armc5-bin-dir=<ARMC5_bin_dir_path> ARM Compiler 5 bin directory. |
| --armc6-bin-dir=<ARMC6_bin_dir_path> ARM Compiler 6 bin directory. |
| --gnutls-cli=<GnuTLS_cli_path> GnuTLS client executable to use for most tests. |
| --gnutls-serv=<GnuTLS_serv_path> GnuTLS server executable to use for most tests. |
| --gnutls-legacy-cli=<GnuTLS_cli_path> GnuTLS client executable to use for legacy tests. |
| --gnutls-legacy-serv=<GnuTLS_serv_path> GnuTLS server executable to use for legacy tests. |
| --openssl=<OpenSSL_path> OpenSSL executable to use for most tests. |
| --openssl-legacy=<OpenSSL_path> OpenSSL executable to use for legacy tests e.g. SSLv3. |
| EOF |
| } |
| |
| # remove built files as well as the cmake cache/config |
| cleanup() |
| { |
| if [ -n "${MBEDTLS_ROOT_DIR+set}" ]; then |
| cd "$MBEDTLS_ROOT_DIR" |
| fi |
| |
| command make clean |
| |
| # Remove CMake artefacts |
| find . -name .git -prune -o -name yotta -prune -o \ |
| -iname CMakeFiles -exec rm -rf {} \+ -o \ |
| \( -iname cmake_install.cmake -o \ |
| -iname CTestTestfile.cmake -o \ |
| -iname CMakeCache.txt \) -exec rm {} \+ |
| # Recover files overwritten by in-tree CMake builds |
| rm -f include/Makefile include/mbedtls/Makefile programs/*/Makefile |
| git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile |
| git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile |
| |
| if [ -f "$CONFIG_BAK" ]; then |
| mv "$CONFIG_BAK" "$CONFIG_H" |
| fi |
| } |
| |
| # Executed on exit. May be redefined depending on command line options. |
| final_report () { |
| : |
| } |
| |
| fatal_signal () { |
| cleanup |
| final_report $1 |
| trap - $1 |
| kill -$1 $$ |
| } |
| |
| trap 'fatal_signal HUP' HUP |
| trap 'fatal_signal INT' INT |
| trap 'fatal_signal TERM' TERM |
| |
| msg() |
| { |
| if [ -n "${current_component:-}" ]; then |
| current_section="${current_component#component_}: $1" |
| else |
| current_section="$1" |
| fi |
| |
| if [ $QUIET -eq 1 ]; then |
| return |
| fi |
| |
| echo "" |
| echo "******************************************************************" |
| echo "* $current_section " |
| printf "* "; date |
| echo "******************************************************************" |
| } |
| |
| armc6_build_test() |
| { |
| FLAGS="$1" |
| |
| msg "build: ARM Compiler 6 ($FLAGS)" |
| ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \ |
| WARNING_CFLAGS='-xc -std=c99' make lib |
| |
| msg "size: ARM Compiler 6 ($FLAGS)" |
| "$ARMC6_FROMELF" -z library/*.o |
| |
| make clean |
| } |
| |
| err_msg() |
| { |
| echo "$1" >&2 |
| } |
| |
| check_tools() |
| { |
| for TOOL in "$@"; do |
| if ! `type "$TOOL" >/dev/null 2>&1`; then |
| err_msg "$TOOL not found!" |
| exit 1 |
| fi |
| done |
| } |
| |
| pre_parse_command_line () { |
| COMMAND_LINE_COMPONENTS= |
| all_except=0 |
| no_armcc= |
| |
| while [ $# -gt 0 ]; do |
| case "$1" in |
| --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";; |
| --armcc) no_armcc=;; |
| --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";; |
| --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";; |
| --except) all_except=1;; |
| --force|-f) FORCE=1;; |
| --gnutls-cli) shift; GNUTLS_CLI="$1";; |
| --gnutls-legacy-cli) shift; GNUTLS_LEGACY_CLI="$1";; |
| --gnutls-legacy-serv) shift; GNUTLS_LEGACY_SERV="$1";; |
| --gnutls-serv) shift; GNUTLS_SERV="$1";; |
| --help|-h) usage; exit;; |
| --keep-going|-k) KEEP_GOING=1;; |
| --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;; |
| --list-components) printf '%s\n' $SUPPORTED_COMPONENTS; exit;; |
| --memory|-m) MEMORY=1;; |
| --no-armcc) no_armcc=1;; |
| --no-force) FORCE=0;; |
| --no-keep-going) KEEP_GOING=0;; |
| --no-memory) MEMORY=0;; |
| --no-yotta) YOTTA=0;; |
| --no-quiet) QUIET=0;; |
| --openssl) shift; OPENSSL="$1";; |
| --openssl-legacy) shift; OPENSSL_LEGACY="$1";; |
| --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";; |
| --quiet|-q) QUIET=1;; |
| --random-seed) unset SEED;; |
| --release-test|-r) SEED=$RELEASE_SEED;; |
| --seed|-s) shift; SEED="$1";; |
| --yotta) YOTTA=1;; |
| -*) |
| echo >&2 "Unknown option: $1" |
| echo >&2 "Run $0 --help for usage." |
| exit 120 |
| ;; |
| *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";; |
| esac |
| shift |
| done |
| |
| # With no list of components, run everything. |
| if [ -z "$COMMAND_LINE_COMPONENTS" ]; then |
| all_except=1 |
| fi |
| |
| # --no-armcc is a legacy option. The modern way is --except '*_armcc*'. |
| # Ignore it if components are listed explicitly on the command line. |
| if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then |
| COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*" |
| # --no-armcc also disables yotta. |
| COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_yotta*" |
| fi |
| |
| # Build the list of components to run. |
| RUN_COMPONENTS= |
| for component in $SUPPORTED_COMPONENTS; do |
| if is_component_included "$component"; [ $? -eq $all_except ]; then |
| RUN_COMPONENTS="$RUN_COMPONENTS $component" |
| fi |
| done |
| |
| unset all_except |
| unset no_armcc |
| } |
| |
| pre_check_git () { |
| if [ $FORCE -eq 1 ]; then |
| rm -rf "$OUT_OF_SOURCE_DIR" |
| if [ $YOTTA -eq 1 ]; then |
| rm -rf yotta/module |
| fi |
| git checkout-index -f -q $CONFIG_H |
| cleanup |
| else |
| |
| if [ $YOTTA -ne 0 ] && [ -d yotta/module ]; then |
| err_msg "Warning - there is an existing yotta module in the directory 'yotta/module'" |
| echo "You can either delete your work and retry, or force the test to overwrite the" |
| echo "test by rerunning the script as: $0 --force" |
| exit 1 |
| fi |
| |
| if [ -d "$OUT_OF_SOURCE_DIR" ]; then |
| echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2 |
| echo "You can either delete this directory manually, or force the test by rerunning" |
| echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR" |
| exit 1 |
| fi |
| |
| if ! git diff --quiet include/mbedtls/config.h; then |
| err_msg "Warning - the configuration file 'include/mbedtls/config.h' has been edited. " |
| echo "You can either delete or preserve your work, or force the test by rerunning the" |
| echo "script as: $0 --force" |
| exit 1 |
| fi |
| fi |
| } |
| |
| pre_setup_keep_going () { |
| failure_summary= |
| failure_count=0 |
| start_red= |
| end_color= |
| if [ -t 1 ]; then |
| case "${TERM:-}" in |
| *color*|cygwin|linux|rxvt*|screen|[Eex]term*) |
| start_red=$(printf '\033[31m') |
| end_color=$(printf '\033[0m') |
| ;; |
| esac |
| fi |
| record_status () { |
| if "$@"; then |
| last_status=0 |
| else |
| last_status=$? |
| text="$current_section: $* -> $last_status" |
| failure_summary="$failure_summary |
| $text" |
| failure_count=$((failure_count + 1)) |
| echo "${start_red}^^^^$text^^^^${end_color}" >&2 |
| fi |
| } |
| make () { |
| case "$*" in |
| *test|*check) |
| if [ $build_status -eq 0 ]; then |
| record_status command make "$@" |
| else |
| echo "(skipped because the build failed)" |
| fi |
| ;; |
| *) |
| record_status command make "$@" |
| build_status=$last_status |
| ;; |
| esac |
| } |
| final_report () { |
| if [ $failure_count -gt 0 ]; then |
| echo |
| echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" |
| echo "${start_red}FAILED: $failure_count${end_color}$failure_summary" |
| echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" |
| exit 1 |
| elif [ -z "${1-}" ]; then |
| echo "SUCCESS :)" |
| fi |
| if [ -n "${1-}" ]; then |
| echo "Killed by SIG$1." |
| fi |
| } |
| } |
| |
| if_build_succeeded () { |
| if [ $build_status -eq 0 ]; then |
| record_status "$@" |
| fi |
| } |
| |
| # to be used instead of ! for commands run with |
| # record_status or if_build_succeeded |
| not() { |
| ! "$@" |
| } |
| |
| pre_setup_quiet_redirect () { |
| if [ $QUIET -ne 1 ]; then |
| redirect_out () { |
| "$@" |
| } |
| else |
| redirect_out () { |
| "$@" >/dev/null |
| } |
| fi |
| } |
| |
| pre_print_configuration () { |
| if [ $QUIET -eq 1 ]; then |
| return |
| fi |
| |
| msg "info: $0 configuration" |
| echo "MEMORY: $MEMORY" |
| echo "FORCE: $FORCE" |
| echo "SEED: ${SEED-"UNSET"}" |
| echo "OPENSSL: $OPENSSL" |
| echo "OPENSSL_LEGACY: $OPENSSL_LEGACY" |
| echo "GNUTLS_CLI: $GNUTLS_CLI" |
| echo "GNUTLS_SERV: $GNUTLS_SERV" |
| echo "GNUTLS_LEGACY_CLI: $GNUTLS_LEGACY_CLI" |
| echo "GNUTLS_LEGACY_SERV: $GNUTLS_LEGACY_SERV" |
| echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR" |
| echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR" |
| } |
| |
| # Make sure the tools we need are available. |
| pre_check_tools () { |
| # Build the list of variables to pass to output_env.sh. |
| set env |
| |
| case " $RUN_COMPONENTS " in |
| # Require OpenSSL and GnuTLS if running any tests (as opposed to |
| # only doing builds). Not all tests run OpenSSL and GnuTLS, but this |
| # is a good enough approximation in practice. |
| *" test_"*) |
| # To avoid setting OpenSSL and GnuTLS for each call to compat.sh |
| # and ssl-opt.sh, we just export the variables they require. |
| export OPENSSL_CMD="$OPENSSL" |
| export GNUTLS_CLI="$GNUTLS_CLI" |
| export GNUTLS_SERV="$GNUTLS_SERV" |
| # Avoid passing --seed flag in every call to ssl-opt.sh |
| if [ -n "${SEED-}" ]; then |
| export SEED |
| fi |
| set "$@" OPENSSL="$OPENSSL" OPENSSL_LEGACY="$OPENSSL_LEGACY" |
| set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV" |
| set "$@" GNUTLS_LEGACY_CLI="$GNUTLS_LEGACY_CLI" |
| set "$@" GNUTLS_LEGACY_SERV="$GNUTLS_LEGACY_SERV" |
| check_tools "$OPENSSL" "$OPENSSL_LEGACY" \ |
| "$GNUTLS_CLI" "$GNUTLS_SERV" \ |
| "$GNUTLS_LEGACY_CLI" "$GNUTLS_LEGACY_SERV" |
| ;; |
| esac |
| |
| case " $RUN_COMPONENTS " in |
| *_doxygen[_\ ]*) check_tools "doxygen" "dot";; |
| esac |
| |
| case " $RUN_COMPONENTS " in |
| *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";; |
| esac |
| |
| case " $RUN_COMPONENTS " in |
| *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";; |
| esac |
| |
| case " $RUN_COMPONENTS " in |
| *_armcc*|*_yotta*) |
| ARMC5_CC="$ARMC5_BIN_DIR/armcc" |
| ARMC5_AR="$ARMC5_BIN_DIR/armar" |
| ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf" |
| ARMC6_CC="$ARMC6_BIN_DIR/armclang" |
| ARMC6_AR="$ARMC6_BIN_DIR/armar" |
| ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf" |
| check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \ |
| "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";; |
| esac |
| |
| # past this point, no call to check_tool, only printing output |
| if [ $QUIET -eq 1 ]; then |
| return |
| fi |
| |
| msg "info: output_env.sh" |
| case $RUN_COMPONENTS in |
| *_armcc*|*_yotta*) |
| set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;; |
| *) set "$@" RUN_ARMCC=0;; |
| esac |
| "$@" scripts/output_env.sh |
| } |
| |
| |
| |
| ################################################################ |
| #### Basic checks |
| ################################################################ |
| |
| # |
| # Test Suites to be executed |
| # |
| # The test ordering tries to optimize for the following criteria: |
| # 1. Catch possible problems early, by running first tests that run quickly |
| # and/or are more likely to fail than others (eg I use Clang most of the |
| # time, so start with a GCC build). |
| # 2. Minimize total running time, by avoiding useless rebuilds |
| # |
| # Indicative running times are given for reference. |
| |
| component_check_recursion () { |
| msg "test: recursion.pl" # < 1s |
| record_status tests/scripts/recursion.pl library/*.c |
| } |
| |
| component_check_generated_files () { |
| msg "test: freshness of generated source files" # < 1s |
| record_status tests/scripts/check-generated-files.sh |
| } |
| |
| component_check_doxy_blocks () { |
| msg "test: doxygen markup outside doxygen blocks" # < 1s |
| record_status tests/scripts/check-doxy-blocks.pl |
| } |
| |
| component_check_files () { |
| msg "Check: file sanity checks (permissions, encodings)" # < 1s |
| record_status tests/scripts/check_files.py |
| } |
| |
| component_check_changelog () { |
| msg "Check: changelog entries" # < 1s |
| rm -f ChangeLog.new |
| record_status scripts/assemble_changelog.py -o ChangeLog.new |
| if [ -e ChangeLog.new ]; then |
| # Show the diff for information. It isn't an error if the diff is |
| # non-empty. |
| diff -u ChangeLog ChangeLog.new || true |
| rm ChangeLog.new |
| fi |
| } |
| |
| component_check_names () { |
| msg "test/build: declared and exported names" # < 3s |
| record_status tests/scripts/check-names.sh -v |
| } |
| |
| component_check_doxygen_warnings () { |
| msg "test: doxygen warnings" # ~ 3s |
| record_status tests/scripts/doxygen.sh |
| } |
| |
| |
| ################################################################ |
| #### Build and test many configurations and targets |
| ################################################################ |
| |
| component_test_large_ecdsa_key_signature () { |
| |
| SMALL_MPI_MAX_SIZE=136 # Small enough to interfere with the EC signatures |
| |
| msg "build: cmake + MBEDTLS_MPI_MAX_SIZE=${SMALL_MPI_MAX_SIZE}, gcc, ASan" # ~ 1 min 50s |
| scripts/config.pl set MBEDTLS_MPI_MAX_SIZE $SMALL_MPI_MAX_SIZE |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| INEVITABLY_PRESENT_FILE=Makefile |
| SIGNATURE_FILE="${INEVITABLY_PRESENT_FILE}.sig" # Warning, this is rm -f'ed below |
| |
| msg "test: pk_sign secp521r1_prv.der for MBEDTLS_MPI_MAX_SIZE=${SMALL_MPI_MAX_SIZE} (ASan build)" # ~ 5s |
| if_build_succeeded programs/pkey/pk_sign tests/data_files/secp521r1_prv.der $INEVITABLY_PRESENT_FILE |
| rm -f $SIGNATURE_FILE |
| } |
| |
| component_test_default_out_of_box () { |
| msg "build: make, default config (out-of-box)" # ~1min |
| make |
| |
| msg "test: main suites make, default config (out-of-box)" # ~10s |
| make test |
| |
| msg "selftest: make, default config (out-of-box)" # ~10s |
| if_build_succeeded programs/test/selftest |
| } |
| |
| component_build_yotta () { |
| # Note - use of yotta is deprecated, and yotta also requires armcc to be on the |
| # path, and uses whatever version of armcc it finds there. |
| msg "build: create and build yotta module" # ~ 30s |
| record_status tests/scripts/yotta-build.sh |
| } |
| support_build_yotta () { |
| [ $YOTTA -ne 0 ] |
| } |
| |
| component_test_default_cmake_gcc_asan () { |
| msg "build: cmake, gcc, ASan" # ~ 1 min 50s |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s |
| make test |
| |
| msg "test: selftest (ASan build)" # ~ 10s |
| if_build_succeeded programs/test/selftest |
| |
| msg "test: ssl-opt.sh (ASan build)" # ~ 1 min |
| if_build_succeeded tests/ssl-opt.sh |
| |
| msg "test: compat.sh (ASan build)" # ~ 6 min |
| if_build_succeeded tests/compat.sh |
| } |
| |
| component_test_full_cmake_gcc_asan () { |
| msg "build: full config, cmake, gcc, ASan" |
| scripts/config.pl full |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: main suites (inc. selftests) (full config, ASan build)" |
| make test |
| |
| msg "test: selftest (ASan build)" # ~ 10s |
| if_build_succeeded programs/test/selftest |
| |
| msg "test: ssl-opt.sh (full config, ASan build)" |
| if_build_succeeded tests/ssl-opt.sh |
| |
| msg "test: compat.sh (full config, ASan build)" |
| if_build_succeeded tests/compat.sh |
| } |
| |
| component_test_zlib_make() { |
| msg "build: zlib enabled, make" |
| scripts/config.pl set MBEDTLS_ZLIB_SUPPORT |
| make ZLIB=1 CFLAGS='-Werror -O1' |
| |
| msg "test: main suites (zlib, make)" |
| make test |
| |
| msg "test: ssl-opt.sh (zlib, make)" |
| if_build_succeeded tests/ssl-opt.sh |
| } |
| support_test_zlib_make () { |
| base=support_test_zlib_$$ |
| cat <<'EOF' > ${base}.c |
| #include "zlib.h" |
| int main(void) { return 0; } |
| EOF |
| gcc -o ${base}.exe ${base}.c -lz 2>/dev/null |
| ret=$? |
| rm -f ${base}.* |
| return $ret |
| } |
| |
| component_test_zlib_cmake() { |
| msg "build: zlib enabled, cmake" |
| scripts/config.pl set MBEDTLS_ZLIB_SUPPORT |
| cmake -D ENABLE_ZLIB_SUPPORT=On -D CMAKE_BUILD_TYPE:String=Check . |
| make |
| |
| msg "test: main suites (zlib, cmake)" |
| make test |
| |
| msg "test: ssl-opt.sh (zlib, cmake)" |
| if_build_succeeded tests/ssl-opt.sh |
| } |
| support_test_zlib_cmake () { |
| support_test_zlib_make "$@" |
| } |
| |
| component_test_ref_configs () { |
| msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| record_status tests/scripts/test-ref-configs.pl |
| } |
| |
| component_test_sslv3 () { |
| msg "build: Default + SSLv3 (ASan build)" # ~ 6 min |
| scripts/config.pl set MBEDTLS_SSL_PROTO_SSL3 |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: SSLv3 - main suites (inc. selftests) (ASan build)" # ~ 50s |
| make test |
| |
| msg "build: SSLv3 - compat.sh (ASan build)" # ~ 6 min |
| if_build_succeeded tests/compat.sh -m 'tls1 tls1_1 tls1_2 dtls1 dtls1_2' |
| if_build_succeeded env OPENSSL_CMD="$OPENSSL_LEGACY" tests/compat.sh -m 'ssl3' |
| |
| msg "build: SSLv3 - ssl-opt.sh (ASan build)" # ~ 6 min |
| if_build_succeeded tests/ssl-opt.sh |
| } |
| |
| component_test_no_renegotiation () { |
| msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min |
| scripts/config.pl unset MBEDTLS_SSL_RENEGOTIATION |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s |
| make test |
| |
| msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min |
| if_build_succeeded tests/ssl-opt.sh |
| } |
| |
| component_test_rsa_no_crt () { |
| msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min |
| scripts/config.pl set MBEDTLS_RSA_NO_CRT |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s |
| make test |
| |
| msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s |
| if_build_succeeded tests/ssl-opt.sh -f RSA |
| |
| msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min |
| if_build_succeeded tests/compat.sh -t RSA |
| } |
| |
| component_test_no_ctr_drbg () { |
| msg "build: Full minus CTR_DRBG" |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_CTR_DRBG_C |
| |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: no CTR_DRBG" |
| make test |
| |
| # no ssl-opt.sh/compat.sh as they all depend on CTR_DRBG so far |
| } |
| |
| component_test_no_hmac_drbg () { |
| msg "build: Full minus HMAC_DRBG" |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_HMAC_DRBG_C |
| scripts/config.pl unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG |
| |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: no HMAC_DRBG" |
| make test |
| |
| # No ssl-opt.sh/compat.sh as they never use HMAC_DRBG so far, |
| # so there's little value in running those lengthy tests here. |
| } |
| |
| component_test_no_drbg_all_hashes () { |
| # this tests the internal ECP DRBG using a KDF based on SHA-512 |
| msg "build: Default minus DRBGs" |
| scripts/config.pl unset MBEDTLS_CTR_DRBG_C |
| scripts/config.pl unset MBEDTLS_HMAC_DRBG_C |
| scripts/config.pl unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG |
| scripts/config.pl unset MBEDTLS_PSA_CRYPTO_C # requires a DRBG |
| scripts/config.pl unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA Crypto |
| |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: Default minus DRBGs" |
| make test |
| |
| # no SSL tests as they all depend on having a DRBG |
| } |
| |
| component_test_no_drbg_no_sha512 () { |
| # this tests the internal ECP DRBG using a KDF based on SHA-256 |
| msg "build: Default minus DRBGs minus SHA-512" |
| scripts/config.pl unset MBEDTLS_CTR_DRBG_C |
| scripts/config.pl unset MBEDTLS_HMAC_DRBG_C |
| scripts/config.pl unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG |
| scripts/config.pl unset MBEDTLS_PSA_CRYPTO_C # requires a DRBG |
| scripts/config.pl unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA Crypto |
| scripts/config.pl unset MBEDTLS_SHA512_C |
| |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: Default minus DRBGs minus SHA-512" |
| make test |
| |
| # no SSL tests as they all depend on having a DRBG |
| } |
| |
| component_test_ecp_no_internal_rng () { |
| msg "build: Default plus ECP_NO_INTERNAL_RNG minus DRBG modules" |
| scripts/config.pl set MBEDTLS_ECP_NO_INTERNAL_RNG |
| scripts/config.pl unset MBEDTLS_CTR_DRBG_C |
| scripts/config.pl unset MBEDTLS_HMAC_DRBG_C |
| scripts/config.pl unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG |
| scripts/config.pl unset MBEDTLS_PSA_CRYPTO_C # requires a DRBG |
| scripts/config.pl unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA Crypto |
| |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: ECP_NO_INTERNAL_RNG, no DRBG module" |
| make test |
| |
| # no SSL tests as they all depend on having a DRBG |
| } |
| |
| component_test_full_cmake_clang () { |
| msg "build: cmake, full config, clang" # ~ 50s |
| scripts/config.pl full |
| CC=clang cmake -D CMAKE_BUILD_TYPE:String=Check -D ENABLE_TESTING=On . |
| make |
| |
| msg "test: main suites (full config)" # ~ 5s |
| make test |
| |
| msg "test: ssl-opt.sh default (full config)" # ~ 1s |
| if_build_succeeded tests/ssl-opt.sh -f Default |
| |
| msg "test: compat.sh RC4, DES, 3DES & NULL (full config)" # ~ 2 min |
| if_build_succeeded env OPENSSL_CMD="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -e '^$' -f 'NULL\|DES\|RC4\|ARCFOUR' |
| } |
| |
| component_test_default_no_deprecated () { |
| # Test that removing the deprecated features from the default |
| # configuration leaves something consistent. |
| msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s |
| scripts/config.pl set MBEDTLS_DEPRECATED_REMOVED |
| make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' |
| |
| msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s |
| make test |
| } |
| |
| component_test_full_deprecated_warning () { |
| # Test that there is nothing deprecated in the full configuraration. |
| # A deprecated feature would trigger a warning (made fatal) from |
| # MBEDTLS_DEPRECATED_WARNING. |
| msg "build: make, full + MBEDTLS_DEPRECATED_WARNING" # ~ 30s |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_DEPRECATED_REMOVED |
| scripts/config.pl set MBEDTLS_DEPRECATED_WARNING |
| # There are currently no tests for any deprecated feature. |
| # If some are added, 'make test' would trigger warnings here. |
| make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' |
| |
| msg "test: make, full + MBEDTLS_DEPRECATED_WARNING" # ~ 5s |
| make test |
| } |
| |
| component_test_depends_curves () { |
| msg "test/build: curves.pl (gcc)" # ~ 4 min |
| record_status tests/scripts/curves.pl |
| } |
| |
| component_test_depends_hashes () { |
| msg "test/build: depends-hashes.pl (gcc)" # ~ 2 min |
| record_status tests/scripts/depends-hashes.pl |
| } |
| |
| component_test_depends_pkalgs () { |
| msg "test/build: depends-pkalgs.pl (gcc)" # ~ 2 min |
| record_status tests/scripts/depends-pkalgs.pl |
| } |
| |
| component_build_key_exchanges () { |
| msg "test/build: key-exchanges (gcc)" # ~ 1 min |
| record_status tests/scripts/key-exchanges.pl |
| } |
| |
| component_build_default_make_gcc () { |
| msg "build: Unix make, -Os (gcc)" # ~ 30s |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' |
| } |
| |
| component_test_no_platform () { |
| # Full configuration build, without platform support, file IO and net sockets. |
| # This should catch missing mbedtls_printf definitions, and by disabling file |
| # IO, it should catch missing '#include <stdio.h>' |
| msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_PLATFORM_C |
| scripts/config.pl unset MBEDTLS_NET_C |
| scripts/config.pl unset MBEDTLS_PLATFORM_MEMORY |
| scripts/config.pl unset MBEDTLS_PLATFORM_PRINTF_ALT |
| scripts/config.pl unset MBEDTLS_PLATFORM_FPRINTF_ALT |
| scripts/config.pl unset MBEDTLS_PLATFORM_SNPRINTF_ALT |
| scripts/config.pl unset MBEDTLS_PLATFORM_TIME_ALT |
| scripts/config.pl unset MBEDTLS_PLATFORM_EXIT_ALT |
| scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT |
| scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED |
| scripts/config.pl unset MBEDTLS_FS_IO |
| # Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19, |
| # to re-enable platform integration features otherwise disabled in C99 builds |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test |
| } |
| |
| component_build_no_std_function () { |
| # catch compile bugs in _uninit functions |
| msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s |
| scripts/config.pl full |
| scripts/config.pl set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS |
| scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED |
| scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' |
| } |
| |
| component_build_no_ssl_srv () { |
| msg "build: full config except ssl_srv.c, make, gcc" # ~ 30s |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_SSL_SRV_C |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' |
| } |
| |
| component_build_no_ssl_cli () { |
| msg "build: full config except ssl_cli.c, make, gcc" # ~ 30s |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_SSL_CLI_C |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' |
| } |
| |
| component_build_no_sockets () { |
| # Note, C99 compliance can also be tested with the sockets support disabled, |
| # as that requires a POSIX platform (which isn't the same as C99). |
| msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc. |
| scripts/config.pl set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib |
| } |
| |
| component_test_memory_buffer_allocator_backtrace () { |
| msg "build: default config with memory buffer allocator and backtrace enabled" |
| scripts/config.pl set MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| scripts/config.pl set MBEDTLS_PLATFORM_MEMORY |
| scripts/config.pl set MBEDTLS_MEMORY_BACKTRACE |
| scripts/config.pl set MBEDTLS_MEMORY_DEBUG |
| CC=gcc cmake . |
| make |
| |
| msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE" |
| make test |
| } |
| |
| component_test_memory_buffer_allocator () { |
| msg "build: default config with memory buffer allocator" |
| scripts/config.pl set MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| scripts/config.pl set MBEDTLS_PLATFORM_MEMORY |
| CC=gcc cmake . |
| make |
| |
| msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C" |
| make test |
| |
| msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C" |
| # MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out. |
| if_build_succeeded tests/ssl-opt.sh -e '^DTLS proxy' |
| } |
| |
| component_test_no_max_fragment_length () { |
| msg "build: default config except MFL extension (ASan build)" # ~ 30s |
| scripts/config.pl unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: ssl-opt.sh, MFL-related tests" |
| if_build_succeeded tests/ssl-opt.sh -f "Max fragment length" |
| } |
| |
| component_test_null_entropy () { |
| msg "build: default config with MBEDTLS_TEST_NULL_ENTROPY (ASan build)" |
| scripts/config.pl set MBEDTLS_TEST_NULL_ENTROPY |
| scripts/config.pl set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES |
| scripts/config.pl set MBEDTLS_ENTROPY_C |
| scripts/config.pl unset MBEDTLS_ENTROPY_NV_SEED |
| scripts/config.pl unset MBEDTLS_PLATFORM_NV_SEED_ALT |
| scripts/config.pl unset MBEDTLS_ENTROPY_HARDWARE_ALT |
| scripts/config.pl unset MBEDTLS_HAVEGE_C |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan -D UNSAFE_BUILD=ON . |
| make |
| |
| msg "test: MBEDTLS_TEST_NULL_ENTROPY - main suites (inc. selftests) (ASan build)" |
| make test |
| } |
| |
| component_test_no_date_time () { |
| msg "build: default config without MBEDTLS_HAVE_TIME_DATE" |
| scripts/config.pl unset MBEDTLS_HAVE_TIME_DATE |
| CC=gcc cmake |
| make |
| |
| msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites" |
| make test |
| } |
| |
| component_test_platform_calloc_macro () { |
| msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" |
| scripts/config.pl set MBEDTLS_PLATFORM_MEMORY |
| scripts/config.pl set MBEDTLS_PLATFORM_CALLOC_MACRO calloc |
| scripts/config.pl set MBEDTLS_PLATFORM_FREE_MACRO free |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" |
| make test |
| } |
| |
| component_test_malloc_0_null () { |
| msg "build: malloc(0) returns NULL (ASan+UBSan build)" |
| scripts/config.pl full |
| scripts/config.pl unset MBEDTLS_MEMORY_BUFFER_ALLOC_C |
| make CC=gcc CFLAGS="'-DMBEDTLS_CONFIG_FILE=\"$PWD/tests/configs/config-wrapper-malloc-0-null.h\"' -O -Werror -Wall -Wextra -fsanitize=address,undefined" LDFLAGS='-fsanitize=address,undefined' |
| |
| msg "test: malloc(0) returns NULL (ASan+UBSan build)" |
| make test |
| |
| msg "selftest: malloc(0) returns NULL (ASan+UBSan build)" |
| # Just the calloc selftest. "make test" ran the others as part of the |
| # test suites. |
| if_build_succeeded programs/test/selftest calloc |
| } |
| |
| component_test_make_shared () { |
| msg "build/test: make shared" # ~ 40s |
| make SHARED=1 all check |
| ldd programs/util/strerror | grep libmbedcrypto |
| } |
| |
| component_test_cmake_shared () { |
| msg "build/test: cmake shared" # ~ 2min |
| cmake -DUSE_SHARED_MBEDTLS_LIBRARY=On . |
| make |
| ldd programs/util/strerror | grep libmbedcrypto |
| make test |
| } |
| |
| test_build_opt () { |
| info=$1 cc=$2; shift 2 |
| for opt in "$@"; do |
| msg "build/test: $cc $opt, $info" # ~ 30s |
| make CC="$cc" CFLAGS="$opt -Wall -Wextra -Werror" |
| # We're confident enough in compilers to not run _all_ the tests, |
| # but at least run the unit tests. In particular, runs with |
| # optimizations use inline assembly whereas runs with -O0 |
| # skip inline assembly. |
| make test # ~30s |
| make clean |
| done |
| } |
| |
| component_test_clang_opt () { |
| scripts/config.pl full |
| test_build_opt 'full config' clang -O0 -Os -O2 |
| } |
| |
| component_test_gcc_opt () { |
| scripts/config.pl full |
| test_build_opt 'full config' gcc -O0 -Os -O2 |
| } |
| |
| component_build_mbedtls_config_file () { |
| msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s |
| # Use the full config so as to catch a maximum of places where |
| # the check of MBEDTLS_CONFIG_FILE might be missing. |
| scripts/config.pl full |
| sed 's!"check_config.h"!"mbedtls/check_config.h"!' <"$CONFIG_H" >full_config.h |
| echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H" |
| make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'" |
| rm -f full_config.h |
| } |
| |
| component_test_m32_o0 () { |
| # Build once with -O0, to compile out the i386 specific inline assembly |
| msg "build: i386, make, gcc -O0 (ASan build)" # ~ 30s |
| scripts/config.pl full |
| make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O0" LDFLAGS="-m32 $ASAN_CFLAGS" |
| |
| msg "test: i386, make, gcc -O0 (ASan build)" |
| make test |
| } |
| support_test_m32_o0 () { |
| case $(uname -m) in |
| *64*) true;; |
| *) false;; |
| esac |
| } |
| |
| component_test_m32_o1 () { |
| # Build again with -O1, to compile in the i386 specific inline assembly |
| msg "build: i386, make, gcc -O1 (ASan build)" # ~ 30s |
| scripts/config.pl full |
| make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O1" LDFLAGS="-m32 $ASAN_CFLAGS" |
| |
| msg "test: i386, make, gcc -O1 (ASan build)" |
| make test |
| |
| msg "test ssl-opt.sh, i386, make, gcc-O1" |
| if_build_succeeded tests/ssl-opt.sh |
| } |
| support_test_m32_o1 () { |
| support_test_m32_o0 "$@" |
| } |
| |
| component_test_mx32 () { |
| msg "build: 64-bit ILP32, make, gcc" # ~ 30s |
| scripts/config.pl full |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -mx32' LDFLAGS='-mx32' |
| |
| msg "test: 64-bit ILP32, make, gcc" |
| make test |
| } |
| support_test_mx32 () { |
| case $(uname -m) in |
| amd64|x86_64) true;; |
| *) false;; |
| esac |
| } |
| |
| component_test_min_mpi_window_size () { |
| msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s |
| scripts/config.pl set MBEDTLS_MPI_WINDOW_SIZE 1 |
| CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . |
| make |
| |
| msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s |
| make test |
| } |
| |
| component_test_have_int32 () { |
| msg "build: gcc, force 32-bit bignum limbs" |
| scripts/config.pl unset MBEDTLS_HAVE_ASM |
| scripts/config.pl unset MBEDTLS_AESNI_C |
| scripts/config.pl unset MBEDTLS_PADLOCK_C |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32' |
| |
| msg "test: gcc, force 32-bit bignum limbs" |
| make test |
| } |
| |
| component_test_have_int64 () { |
| msg "build: gcc, force 64-bit bignum limbs" |
| scripts/config.pl unset MBEDTLS_HAVE_ASM |
| scripts/config.pl unset MBEDTLS_AESNI_C |
| scripts/config.pl unset MBEDTLS_PADLOCK_C |
| make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64' |
| |
| msg "test: gcc, force 64-bit bignum limbs" |
| make test |
| } |
| |
| component_build_arm_none_eabi_gcc () { |
| msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1" # ~ 10s |
| scripts/config.pl baremetal |
| make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -Wall -Wextra -O1' lib |
| |
| msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1" |
| ${ARM_NONE_EABI_GCC_PREFIX}size library/*.o |
| } |
| |
| component_build_arm_none_eabi_gcc_arm5vte () { |
| msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte" # ~ 10s |
| scripts/config.pl baremetal |
| # Build for a target platform that's close to what Debian uses |
| # for its "armel" distribution (https://wiki.debian.org/ArmEabiPort). |
| # See https://github.com/ARMmbed/mbedtls/pull/2169 and comments. |
| # It would be better to build with arm-linux-gnueabi-gcc but |
| # we don't have that on our CI at this time. |
| make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib |
| |
| msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1" |
| ${ARM_NONE_EABI_GCC_PREFIX}size library/*.o |
| } |
| |
| component_build_arm_none_eabi_gcc_m0plus () { |
| msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus" # ~ 10s |
| scripts/config.pl baremetal |
| make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib |
| |
| msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os" |
| ${ARM_NONE_EABI_GCC_PREFIX}size library/*.o |
| } |
| |
| component_build_arm_none_eabi_gcc_no_udbl_division () { |
| msg "build: ${ARM_NONE_EABI_GCC_PREFIX} -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s |
| scripts/config.pl baremetal |
| scripts/config.pl set MBEDTLS_NO_UDBL_DIVISION |
| make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-Werror -Wall -Wextra' lib |
| echo "Checking that software 64-bit division is not required" |
| if_build_succeeded not grep __aeabi_uldiv library/*.o |
| } |
| |
| component_build_armcc () { |
| msg "build: ARM Compiler 5" |
| scripts/config.pl baremetal |
| make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib |
| |
| msg "size: ARM Compiler 5" |
| "$ARMC5_FROMELF" -z library/*.o |
| |
| make clean |
| |
| # ARM Compiler 6 - Target ARMv7-A |
| armc6_build_test "--target=arm-arm-none-eabi -march=armv7-a" |
| |
| # ARM Compiler 6 - Target ARMv7-M |
| armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m" |
| |
| # ARM Compiler 6 - Target ARMv8-A - AArch32 |
| armc6_build_test "--target=arm-arm-none-eabi -march=armv8.2-a" |
| |
| # ARM Compiler 6 - Target ARMv8-M |
| armc6_build_test "--target=arm-arm-none-eabi -march=armv8-m.main" |
| |
| # ARM Compiler 6 - Target ARMv8-A - AArch64 |
| armc6_build_test "--target=aarch64-arm-none-eabi -march=armv8.2-a" |
| } |
| |
| component_build_ssl_hw_record_accel() { |
| msg "build: default config with MBEDTLS_SSL_HW_RECORD_ACCEL enabled" |
| scripts/config.pl set MBEDTLS_SSL_HW_RECORD_ACCEL |
| make CFLAGS='-Werror -O1' |
| } |
| |
| component_test_allow_sha1 () { |
| msg "build: allow SHA1 in certificates by default" |
| scripts/config.pl set MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES |
| make CFLAGS='-Werror -Wall -Wextra' |
| msg "test: allow SHA1 in certificates by default" |
| make test |
| if_build_succeeded tests/ssl-opt.sh -f SHA-1 |
| } |
| |
| component_build_mingw () { |
| msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s |
| make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib programs |
| |
| # note Make tests only builds the tests, but doesn't run them |
| make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror' WINDOWS_BUILD=1 tests |
| make WINDOWS_BUILD=1 clean |
| |
| msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s |
| make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 lib programs |
| make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 tests |
| make WINDOWS_BUILD=1 clean |
| } |
| |
| component_test_memsan () { |
| msg "build: MSan (clang)" # ~ 1 min 20s |
| scripts/config.pl unset MBEDTLS_AESNI_C # memsan doesn't grok asm |
| CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . |
| make |
| |
| msg "test: main suites (MSan)" # ~ 10s |
| make test |
| |
| msg "test: ssl-opt.sh (MSan)" # ~ 1 min |
| if_build_succeeded tests/ssl-opt.sh |
| |
| # Optional part(s) |
| |
| if [ "$MEMORY" -gt 0 ]; then |
| msg "test: compat.sh (MSan)" # ~ 6 min 20s |
| if_build_succeeded tests/compat.sh |
| fi |
| } |
| |
| component_test_valgrind () { |
| msg "build: Release (clang)" |
| CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release . |
| make |
| |
| msg "test: main suites valgrind (Release)" |
| make memcheck |
| |
| # Optional parts (slow; currently broken on OS X because programs don't |
| # seem to receive signals under valgrind on OS X). |
| if [ "$MEMORY" -gt 0 ]; then |
| msg "test: ssl-opt.sh --memcheck (Release)" |
| if_build_succeeded tests/ssl-opt.sh --memcheck |
| fi |
| |
| if [ "$MEMORY" -gt 1 ]; then |
| msg "test: compat.sh --memcheck (Release)" |
| if_build_succeeded tests/compat.sh --memcheck |
| fi |
| } |
| |
| component_test_cmake_out_of_source () { |
| msg "build: cmake 'out-of-source' build" |
| MBEDTLS_ROOT_DIR="$PWD" |
| mkdir "$OUT_OF_SOURCE_DIR" |
| cd "$OUT_OF_SOURCE_DIR" |
| cmake "$MBEDTLS_ROOT_DIR" |
| make |
| |
| msg "test: cmake 'out-of-source' build" |
| make test |
| # Test an SSL option that requires an auxiliary script in test/scripts/. |
| # Also ensure that there are no error messages such as |
| # "No such file or directory", which would indicate that some required |
| # file is missing (ssl-opt.sh tolerates the absence of some files so |
| # may exit with status 0 but emit errors). |
| if_build_succeeded ./tests/ssl-opt.sh -f 'Fallback SCSV: beginning of list' 2>ssl-opt.err |
| if [ -s ssl-opt.err ]; then |
| cat ssl-opt.err >&2 |
| record_status [ ! -s ssl-opt.err ] |
| rm ssl-opt.err |
| fi |
| cd "$MBEDTLS_ROOT_DIR" |
| rm -rf "$OUT_OF_SOURCE_DIR" |
| unset MBEDTLS_ROOT_DIR |
| } |
| |
| |
| |
| ################################################################ |
| #### Termination |
| ################################################################ |
| |
| post_report () { |
| msg "Done, cleaning up" |
| cleanup |
| |
| final_report |
| } |
| |
| |
| |
| ################################################################ |
| #### Run all the things |
| ################################################################ |
| |
| # Run one component and clean up afterwards. |
| run_component () { |
| # Back up the configuration in case the component modifies it. |
| # The cleanup function will restore it. |
| cp -p "$CONFIG_H" "$CONFIG_BAK" |
| current_component="$1" |
| |
| # Run the component code. |
| if [ $QUIET -eq 1 ]; then |
| # msg() is silenced, so just print the component name here |
| echo "${current_component#component_}" |
| fi |
| redirect_out "$@" |
| |
| # Restore the build tree to a clean state. |
| cleanup |
| unset current_component |
| } |
| |
| # Preliminary setup |
| pre_check_environment |
| pre_initialize_variables |
| pre_parse_command_line "$@" |
| |
| pre_check_git |
| build_status=0 |
| if [ $KEEP_GOING -eq 1 ]; then |
| pre_setup_keep_going |
| else |
| record_status () { |
| "$@" |
| } |
| fi |
| pre_setup_quiet_redirect |
| pre_print_configuration |
| pre_check_tools |
| cleanup |
| |
| # Run the requested tests. |
| for component in $RUN_COMPONENTS; do |
| run_component "component_$component" |
| done |
| |
| # We're done. |
| post_report |