| /** |
| * \file rsa.h |
| * |
| * \brief The RSA public-key cryptosystem. |
| * |
| * For more information, see <em>Public-Key Cryptography Standards (PKCS) |
| * #1 v1.5: RSA Encryption</em> and <em>Public-Key Cryptography Standards |
| * (PKCS) #1 v2.1: RSA Cryptography Specifications</em>. |
| * |
| */ |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| * |
| * This file is provided under the Apache License 2.0, or the |
| * GNU General Public License v2.0 or later. |
| * |
| * ********** |
| * Apache License 2.0: |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * ********** |
| * |
| * ********** |
| * GNU General Public License v2.0 or later: |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * ********** |
| */ |
| #ifndef MBEDTLS_RSA_H |
| #define MBEDTLS_RSA_H |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #include "bignum.h" |
| #include "md.h" |
| |
| #if defined(MBEDTLS_THREADING_C) |
| #include "threading.h" |
| #endif |
| |
| /* |
| * RSA Error codes |
| */ |
| #define MBEDTLS_ERR_RSA_BAD_INPUT_DATA -0x4080 /**< Bad input parameters to function. */ |
| #define MBEDTLS_ERR_RSA_INVALID_PADDING -0x4100 /**< Input data contains invalid padding and is rejected. */ |
| #define MBEDTLS_ERR_RSA_KEY_GEN_FAILED -0x4180 /**< Something failed during generation of a key. */ |
| #define MBEDTLS_ERR_RSA_KEY_CHECK_FAILED -0x4200 /**< Key failed to pass the validity check of the library. */ |
| #define MBEDTLS_ERR_RSA_PUBLIC_FAILED -0x4280 /**< The public key operation failed. */ |
| #define MBEDTLS_ERR_RSA_PRIVATE_FAILED -0x4300 /**< The private key operation failed. */ |
| #define MBEDTLS_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */ |
| #define MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */ |
| #define MBEDTLS_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */ |
| #define MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION -0x4500 /**< The implementation does not offer the requested operation, for example, because of security violations or lack of functionality. */ |
| #define MBEDTLS_ERR_RSA_HW_ACCEL_FAILED -0x4580 /**< RSA hardware accelerator failed. */ |
| |
| /* |
| * RSA constants |
| */ |
| #define MBEDTLS_RSA_PUBLIC 0 /**< Request private key operation. */ |
| #define MBEDTLS_RSA_PRIVATE 1 /**< Request public key operation. */ |
| |
| #define MBEDTLS_RSA_PKCS_V15 0 /**< Use PKCS-1 v1.5 encoding. */ |
| #define MBEDTLS_RSA_PKCS_V21 1 /**< Use PKCS-1 v2.1 encoding. */ |
| |
| #define MBEDTLS_RSA_SIGN 1 /**< Identifier for RSA signature operations. */ |
| #define MBEDTLS_RSA_CRYPT 2 /**< Identifier for RSA encryption and decryption operations. */ |
| |
| #define MBEDTLS_RSA_SALT_LEN_ANY -1 |
| |
| /* |
| * The above constants may be used even if the RSA module is compile out, |
| * eg for alternative (PKCS#11) RSA implemenations in the PK layers. |
| */ |
| |
| #if !defined(MBEDTLS_RSA_ALT) |
| // Regular implementation |
| // |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * \brief The RSA context structure. |
| * |
| * \note Direct manipulation of the members of this structure |
| * is deprecated. All manipulation should instead be done through |
| * the public interface functions. |
| */ |
| typedef struct |
| { |
| int ver; /*!< Always 0.*/ |
| size_t len; /*!< The size of \p N in Bytes. */ |
| |
| mbedtls_mpi N; /*!< The public modulus. */ |
| mbedtls_mpi E; /*!< The public exponent. */ |
| |
| mbedtls_mpi D; /*!< The private exponent. */ |
| mbedtls_mpi P; /*!< The first prime factor. */ |
| mbedtls_mpi Q; /*!< The second prime factor. */ |
| |
| mbedtls_mpi DP; /*!< \p D % (P - 1) */ |
| mbedtls_mpi DQ; /*!< \p D % (Q - 1) */ |
| mbedtls_mpi QP; /*!< 1 / (Q % P) */ |
| |
| mbedtls_mpi RN; /*!< cached R^2 mod \p N */ |
| |
| mbedtls_mpi RP; /*!< cached R^2 mod \p P */ |
| mbedtls_mpi RQ; /*!< cached R^2 mod \p Q */ |
| |
| mbedtls_mpi Vi; /*!< The cached blinding value. */ |
| mbedtls_mpi Vf; /*!< The cached un-blinding value. */ |
| |
| int padding; /*!< Selects padding mode: |
| #MBEDTLS_RSA_PKCS_V15 for 1.5 padding and |
| #MBEDTLS_RSA_PKCS_V21 for OAEP or PSS. */ |
| int hash_id; /*!< Hash identifier of mbedtls_md_type_t type, |
| as specified in md.h for use in the MGF |
| mask generating function used in the |
| EME-OAEP and EMSA-PSS encodings. */ |
| #if defined(MBEDTLS_THREADING_C) |
| mbedtls_threading_mutex_t mutex; /*!< Thread-safety mutex. */ |
| #endif |
| } |
| mbedtls_rsa_context; |
| |
| /** |
| * \brief This function initializes an RSA context. |
| * |
| * \note Set padding to #MBEDTLS_RSA_PKCS_V21 for the RSAES-OAEP |
| * encryption scheme and the RSASSA-PSS signature scheme. |
| * |
| * \param ctx The RSA context to initialize. |
| * \param padding Selects padding mode: #MBEDTLS_RSA_PKCS_V15 or |
| * #MBEDTLS_RSA_PKCS_V21. |
| * \param hash_id The hash identifier of #mbedtls_md_type_t type, if |
| * \p padding is #MBEDTLS_RSA_PKCS_V21. |
| * |
| * \note The \p hash_id parameter is ignored when using |
| * #MBEDTLS_RSA_PKCS_V15 padding. |
| * |
| * \note The choice of padding mode is strictly enforced for private key |
| * operations, since there might be security concerns in |
| * mixing padding modes. For public key operations it is |
| * a default value, which can be overridden by calling specific |
| * \c rsa_rsaes_xxx or \c rsa_rsassa_xxx functions. |
| * |
| * \note The hash selected in \p hash_id is always used for OEAP |
| * encryption. For PSS signatures, it is always used for |
| * making signatures, but can be overridden for verifying them. |
| * If set to #MBEDTLS_MD_NONE, it is always overridden. |
| */ |
| void mbedtls_rsa_init( mbedtls_rsa_context *ctx, |
| int padding, |
| int hash_id); |
| |
| /** |
| * \brief This function imports a set of core parameters into an |
| * RSA context. |
| * |
| * \param ctx The initialized RSA context to store the parameters in. |
| * \param N The RSA modulus, or NULL. |
| * \param P The first prime factor of \p N, or NULL. |
| * \param Q The second prime factor of \p N, or NULL. |
| * \param D The private exponent, or NULL. |
| * \param E The public exponent, or NULL. |
| * |
| * \note This function can be called multiple times for successive |
| * imports, if the parameters are not simultaneously present. |
| * |
| * Any sequence of calls to this function should be followed |
| * by a call to mbedtls_rsa_complete(), which checks and |
| * completes the provided information to a ready-for-use |
| * public or private RSA key. |
| * |
| * \note See mbedtls_rsa_complete() for more information on which |
| * parameters are necessary to set up a private or public |
| * RSA key. |
| * |
| * \note The imported parameters are copied and need not be preserved |
| * for the lifetime of the RSA context being set up. |
| * |
| * \return \c 0 on success, or a non-zero error code on failure. |
| */ |
| int mbedtls_rsa_import( mbedtls_rsa_context *ctx, |
| const mbedtls_mpi *N, |
| const mbedtls_mpi *P, const mbedtls_mpi *Q, |
| const mbedtls_mpi *D, const mbedtls_mpi *E ); |
| |
| /** |
| * \brief This function imports core RSA parameters, in raw big-endian |
| * binary format, into an RSA context. |
| * |
| * \param ctx The initialized RSA context to store the parameters in. |
| * \param N The RSA modulus, or NULL. |
| * \param N_len The Byte length of \p N, ignored if \p N == NULL. |
| * \param P The first prime factor of \p N, or NULL. |
| * \param P_len The Byte length of \p P, ignored if \p P == NULL. |
| * \param Q The second prime factor of \p N, or NULL. |
| * \param Q_len The Byte length of \p Q, ignored if \p Q == NULL. |
| * \param D The private exponent, or NULL. |
| * \param D_len The Byte length of \p D, ignored if \p D == NULL. |
| * \param E The public exponent, or NULL. |
| * \param E_len The Byte length of \p E, ignored if \p E == NULL. |
| * |
| * \note This function can be called multiple times for successive |
| * imports, if the parameters are not simultaneously present. |
| * |
| * Any sequence of calls to this function should be followed |
| * by a call to mbedtls_rsa_complete(), which checks and |
| * completes the provided information to a ready-for-use |
| * public or private RSA key. |
| * |
| * \note See mbedtls_rsa_complete() for more information on which |
| * parameters are necessary to set up a private or public |
| * RSA key. |
| * |
| * \note The imported parameters are copied and need not be preserved |
| * for the lifetime of the RSA context being set up. |
| * |
| * \return \c 0 on success, or a non-zero error code on failure. |
| */ |
| int mbedtls_rsa_import_raw( mbedtls_rsa_context *ctx, |
| unsigned char const *N, size_t N_len, |
| unsigned char const *P, size_t P_len, |
| unsigned char const *Q, size_t Q_len, |
| unsigned char const *D, size_t D_len, |
| unsigned char const *E, size_t E_len ); |
| |
| /** |
| * \brief This function completes an RSA context from |
| * a set of imported core parameters. |
| * |
| * To setup an RSA public key, precisely \p N and \p E |
| * must have been imported. |
| * |
| * To setup an RSA private key, sufficient information must |
| * be present for the other parameters to be derivable. |
| * |
| * The default implementation supports the following: |
| * <ul><li>Derive \p P, \p Q from \p N, \p D, \p E.</li> |
| * <li>Derive \p N, \p D from \p P, \p Q, \p E.</li></ul> |
| * Alternative implementations need not support these. |
| * |
| * If this function runs successfully, it guarantees that |
| * the RSA context can be used for RSA operations without |
| * the risk of failure or crash. |
| * |
| * \param ctx The initialized RSA context holding imported parameters. |
| * |
| * \return \c 0 on success, or #MBEDTLS_ERR_RSA_BAD_INPUT_DATA if the |
| * attempted derivations failed. |
| * |
| * \warning This function need not perform consistency checks |
| * for the imported parameters. In particular, parameters that |
| * are not needed by the implementation might be silently |
| * discarded and left unchecked. To check the consistency |
| * of the key material, see mbedtls_rsa_check_privkey(). |
| * |
| */ |
| int mbedtls_rsa_complete( mbedtls_rsa_context *ctx ); |
| |
| /** |
| * \brief This function exports the core parameters of an RSA key. |
| * |
| * If this function runs successfully, the non-NULL buffers |
| * pointed to by \p N, \p P, \p Q, \p D, and \p E are fully |
| * written, with additional unused space filled leading by |
| * zero Bytes. |
| * |
| * Possible reasons for returning |
| * #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION:<ul> |
| * <li>An alternative RSA implementation is in use, which |
| * stores the key externally, and either cannot or should |
| * not export it into RAM.</li> |
| * <li>A SW or HW implementation might not support a certain |
| * deduction. For example, \p P, \p Q from \p N, \p D, |
| * and \p E if the former are not part of the |
| * implementation.</li></ul> |
| * |
| * If the function fails due to an unsupported operation, |
| * the RSA context stays intact and remains usable. |
| * |
| * \param ctx The initialized RSA context. |
| * \param N The MPI to hold the RSA modulus, or NULL. |
| * \param P The MPI to hold the first prime factor of \p N, or NULL. |
| * \param Q The MPI to hold the second prime factor of \p N, or NULL. |
| * \param D The MPI to hold the private exponent, or NULL. |
| * \param E The MPI to hold the public exponent, or NULL. |
| * |
| * \return \c 0 on success, |
| * #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION if exporting the |
| * requested parameters cannot be done due to missing |
| * functionality or because of security policies, |
| * or a non-zero return code on any other failure. |
| * |
| */ |
| int mbedtls_rsa_export( const mbedtls_rsa_context *ctx, |
| mbedtls_mpi *N, mbedtls_mpi *P, mbedtls_mpi *Q, |
| mbedtls_mpi *D, mbedtls_mpi *E ); |
| |
| /** |
| * \brief This function exports core parameters of an RSA key |
| * in raw big-endian binary format. |
| * |
| * If this function runs successfully, the non-NULL buffers |
| * pointed to by \p N, \p P, \p Q, \p D, and \p E are fully |
| * written, with additional unused space filled leading by |
| * zero Bytes. |
| * |
| * Possible reasons for returning |
| * #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION:<ul> |
| * <li>An alternative RSA implementation is in use, which |
| * stores the key externally, and either cannot or should |
| * not export it into RAM.</li> |
| * <li>A SW or HW implementation might not support a certain |
| * deduction. For example, \p P, \p Q from \p N, \p D, |
| * and \p E if the former are not part of the |
| * implementation.</li></ul> |
| * If the function fails due to an unsupported operation, |
| * the RSA context stays intact and remains usable. |
| * |
| * \param ctx The initialized RSA context. |
| * \param N The Byte array to store the RSA modulus, or NULL. |
| * \param N_len The size of the buffer for the modulus. |
| * \param P The Byte array to hold the first prime factor of \p N, or |
| * NULL. |
| * \param P_len The size of the buffer for the first prime factor. |
| * \param Q The Byte array to hold the second prime factor of \p N, or |
| NULL. |
| * \param Q_len The size of the buffer for the second prime factor. |
| * \param D The Byte array to hold the private exponent, or NULL. |
| * \param D_len The size of the buffer for the private exponent. |
| * \param E The Byte array to hold the public exponent, or NULL. |
| * \param E_len The size of the buffer for the public exponent. |
| * |
| * \note The length fields are ignored if the corresponding |
| * buffer pointers are NULL. |
| * |
| * \return \c 0 on success, |
| * #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION if exporting the |
| * requested parameters cannot be done due to missing |
| * functionality or because of security policies, |
| * or a non-zero return code on any other failure. |
| */ |
| int mbedtls_rsa_export_raw( const mbedtls_rsa_context *ctx, |
| unsigned char *N, size_t N_len, |
| unsigned char *P, size_t P_len, |
| unsigned char *Q, size_t Q_len, |
| unsigned char *D, size_t D_len, |
| unsigned char *E, size_t E_len ); |
| |
| /** |
| * \brief This function exports CRT parameters of a private RSA key. |
| * |
| * \param ctx The initialized RSA context. |
| * \param DP The MPI to hold D modulo P-1, or NULL. |
| * \param DQ The MPI to hold D modulo Q-1, or NULL. |
| * \param QP The MPI to hold modular inverse of Q modulo P, or NULL. |
| * |
| * \return \c 0 on success, non-zero error code otherwise. |
| * |
| * \note Alternative RSA implementations not using CRT-parameters |
| * internally can implement this function based on |
| * mbedtls_rsa_deduce_opt(). |
| * |
| */ |
| int mbedtls_rsa_export_crt( const mbedtls_rsa_context *ctx, |
| mbedtls_mpi *DP, mbedtls_mpi *DQ, mbedtls_mpi *QP ); |
| |
| /** |
| * \brief This function sets padding for an already initialized RSA |
| * context. See mbedtls_rsa_init() for details. |
| * |
| * \param ctx The RSA context to be set. |
| * \param padding Selects padding mode: #MBEDTLS_RSA_PKCS_V15 or |
| * #MBEDTLS_RSA_PKCS_V21. |
| * \param hash_id The #MBEDTLS_RSA_PKCS_V21 hash identifier. |
| */ |
| void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding, |
| int hash_id); |
| |
| /** |
| * \brief This function retrieves the length of RSA modulus in Bytes. |
| * |
| * \param ctx The initialized RSA context. |
| * |
| * \return The length of the RSA modulus in Bytes. |
| * |
| */ |
| size_t mbedtls_rsa_get_len( const mbedtls_rsa_context *ctx ); |
| |
| /** |
| * \brief This function generates an RSA keypair. |
| * |
| * \param ctx The RSA context used to hold the key. |
| * \param f_rng The RNG function. |
| * \param p_rng The RNG parameter. |
| * \param nbits The size of the public key in bits. |
| * \param exponent The public exponent. For example, 65537. |
| * |
| * \note mbedtls_rsa_init() must be called before this function, |
| * to set up the RSA context. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| on failure. |
| */ |
| int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| unsigned int nbits, int exponent ); |
| |
| /** |
| * \brief This function checks if a context contains at least an RSA |
| * public key. |
| * |
| * If the function runs successfully, it is guaranteed that |
| * enough information is present to perform an RSA public key |
| * operation using mbedtls_rsa_public(). |
| * |
| * \param ctx The RSA context to check. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| */ |
| int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx ); |
| |
| /** |
| * \brief This function checks if a context contains an RSA private key |
| * and perform basic consistency checks. |
| * |
| * \param ctx The RSA context to check. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code on |
| * failure. |
| * |
| * \note The consistency checks performed by this function not only |
| * ensure that mbedtls_rsa_private() can be called successfully |
| * on the given context, but that the various parameters are |
| * mutually consistent with high probability, in the sense that |
| * mbedtls_rsa_public() and mbedtls_rsa_private() are inverses. |
| * |
| * \warning This function should catch accidental misconfigurations |
| * like swapping of parameters, but it cannot establish full |
| * trust in neither the quality nor the consistency of the key |
| * material that was used to setup the given RSA context: |
| * <ul><li>Consistency: Imported parameters that are irrelevant |
| * for the implementation might be silently dropped. If dropped, |
| * the current function does not have access to them, |
| * and therefore cannot check them. See mbedtls_rsa_complete(). |
| * If you want to check the consistency of the entire |
| * content of an PKCS1-encoded RSA private key, for example, you |
| * should use mbedtls_rsa_validate_params() before setting |
| * up the RSA context. |
| * Additionally, if the implementation performs empirical checks, |
| * these checks substantiate but do not guarantee consistency.</li> |
| * <li>Quality: This function is not expected to perform |
| * extended quality assessments like checking that the prime |
| * factors are safe. Additionally, it is the responsibility of the |
| * user to ensure the trustworthiness of the source of his RSA |
| * parameters, which goes beyond what is effectively checkable |
| * by the library.</li></ul> |
| */ |
| int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx ); |
| |
| /** |
| * \brief This function checks a public-private RSA key pair. |
| * |
| * It checks each of the contexts, and makes sure they match. |
| * |
| * \param pub The RSA context holding the public key. |
| * \param prv The RSA context holding the private key. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| */ |
| int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub, |
| const mbedtls_rsa_context *prv ); |
| |
| /** |
| * \brief This function performs an RSA public key operation. |
| * |
| * \param ctx The RSA context. |
| * \param input The input buffer. |
| * \param output The output buffer. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note This function does not handle message padding. |
| * |
| * \note Make sure to set \p input[0] = 0 or ensure that |
| * input is smaller than \p N. |
| * |
| * \note The input and output buffers must be large |
| * enough. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_public( mbedtls_rsa_context *ctx, |
| const unsigned char *input, |
| unsigned char *output ); |
| |
| /** |
| * \brief This function performs an RSA private key operation. |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Needed for blinding. |
| * \param p_rng The RNG parameter. |
| * \param input The input buffer. |
| * \param output The output buffer. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The input and output buffers must be large |
| * enough. For example, 128 Bytes if RSA-1024 is used. |
| * |
| * \note Blinding is used if and only if a PRNG is provided. |
| * |
| * \note If blinding is used, both the base of exponentation |
| * and the exponent are blinded, providing protection |
| * against some side-channel attacks. |
| * |
| * \warning It is deprecated and a security risk to not provide |
| * a PRNG here and thereby prevent the use of blinding. |
| * Future versions of the library may enforce the presence |
| * of a PRNG. |
| * |
| */ |
| int mbedtls_rsa_private( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| const unsigned char *input, |
| unsigned char *output ); |
| |
| /** |
| * \brief This function adds the message padding, then performs an RSA |
| * operation. |
| * |
| * It is the generic wrapper for performing a PKCS#1 encryption |
| * operation using the \p mode from the context. |
| * |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Needed for padding, PKCS#1 v2.1 |
| * encoding, and #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param ilen The length of the plaintext. |
| * \param input The buffer holding the data to encrypt. |
| * \param output The buffer used to hold the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PUBLIC. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PRIVATE and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The input and output buffers must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, size_t ilen, |
| const unsigned char *input, |
| unsigned char *output ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v1.5 encryption operation |
| * (RSAES-PKCS1-v1_5-ENCRYPT). |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Needed for padding and |
| * #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param ilen The length of the plaintext. |
| * \param input The buffer holding the data to encrypt. |
| * \param output The buffer used to hold the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PUBLIC. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PRIVATE and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The output buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, size_t ilen, |
| const unsigned char *input, |
| unsigned char *output ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v2.1 OAEP encryption |
| * operation (RSAES-OAEP-ENCRYPT). |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Needed for padding and PKCS#1 v2.1 |
| * encoding and #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param label The buffer holding the custom label to use. |
| * \param label_len The length of the label. |
| * \param ilen The length of the plaintext. |
| * \param input The buffer holding the data to encrypt. |
| * \param output The buffer used to hold the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PUBLIC. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PRIVATE and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The output buffer must be as large as the size |
| * of ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| const unsigned char *label, size_t label_len, |
| size_t ilen, |
| const unsigned char *input, |
| unsigned char *output ); |
| |
| /** |
| * \brief This function performs an RSA operation, then removes the |
| * message padding. |
| * |
| * It is the generic wrapper for performing a PKCS#1 decryption |
| * operation using the \p mode from the context. |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param olen The length of the plaintext. |
| * \param input The buffer holding the encrypted data. |
| * \param output The buffer used to hold the plaintext. |
| * \param output_max_len The maximum length of the output buffer. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PRIVATE. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PUBLIC and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The output buffer length \c output_max_len should be |
| * as large as the size \p ctx->len of \p ctx->N (for example, |
| * 128 Bytes if RSA-1024 is used) to be able to hold an |
| * arbitrary decrypted message. If it is not large enough to |
| * hold the decryption of the particular ciphertext provided, |
| * the function returns \c MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. |
| * |
| * \note The input buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, size_t *olen, |
| const unsigned char *input, |
| unsigned char *output, |
| size_t output_max_len ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v1.5 decryption |
| * operation (RSAES-PKCS1-v1_5-DECRYPT). |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param olen The length of the plaintext. |
| * \param input The buffer holding the encrypted data. |
| * \param output The buffer to hold the plaintext. |
| * \param output_max_len The maximum length of the output buffer. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PRIVATE. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PUBLIC and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The output buffer length \c output_max_len should be |
| * as large as the size \p ctx->len of \p ctx->N, for example, |
| * 128 Bytes if RSA-1024 is used, to be able to hold an |
| * arbitrary decrypted message. If it is not large enough to |
| * hold the decryption of the particular ciphertext provided, |
| * the function returns #MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. |
| * |
| * \note The input buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, size_t *olen, |
| const unsigned char *input, |
| unsigned char *output, |
| size_t output_max_len ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v2.1 OAEP decryption |
| * operation (RSAES-OAEP-DECRYPT). |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param label The buffer holding the custom label to use. |
| * \param label_len The length of the label. |
| * \param olen The length of the plaintext. |
| * \param input The buffer holding the encrypted data. |
| * \param output The buffer to hold the plaintext. |
| * \param output_max_len The maximum length of the output buffer. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PRIVATE. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PUBLIC and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 on success, or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The output buffer length \c output_max_len should be |
| * as large as the size \p ctx->len of \p ctx->N, for |
| * example, 128 Bytes if RSA-1024 is used, to be able to |
| * hold an arbitrary decrypted message. If it is not |
| * large enough to hold the decryption of the particular |
| * ciphertext provided, the function returns |
| * #MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. |
| * |
| * \note The input buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| const unsigned char *label, size_t label_len, |
| size_t *olen, |
| const unsigned char *input, |
| unsigned char *output, |
| size_t output_max_len ); |
| |
| /** |
| * \brief This function performs a private RSA operation to sign |
| * a message digest using PKCS#1. |
| * |
| * It is the generic wrapper for performing a PKCS#1 |
| * signature using the \p mode from the context. |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Needed for PKCS#1 v2.1 encoding and for |
| * #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param sig The buffer to hold the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PRIVATE. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PUBLIC and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 if the signing operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| * A buffer length of #MBEDTLS_MPI_MAX_SIZE is always safe. |
| * |
| * \note For PKCS#1 v2.1 encoding, see comments on |
| * mbedtls_rsa_rsassa_pss_sign() for details on |
| * \p md_alg and \p hash_id. |
| */ |
| int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| unsigned char *sig ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v1.5 signature |
| * operation (RSASSA-PKCS1-v1_5-SIGN). |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param sig The buffer to hold the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PRIVATE. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PUBLIC and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 if the signing operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| * A buffer length of #MBEDTLS_MPI_MAX_SIZE is always safe. |
| */ |
| int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| unsigned char *sig ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v2.1 PSS signature |
| * operation (RSASSA-PSS-SIGN). |
| * |
| * \param ctx The RSA context. |
| * \param f_rng The RNG function. Needed for PKCS#1 v2.1 encoding and for |
| * #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param sig The buffer to hold the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PRIVATE. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PUBLIC and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 if the signing operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| * A buffer length of #MBEDTLS_MPI_MAX_SIZE is always safe. |
| * |
| * \note The \p hash_id in the RSA context is the one used for the |
| * encoding. \p md_alg in the function call is the type of hash |
| * that is encoded. According to <em>RFC-3447: Public-Key |
| * Cryptography Standards (PKCS) #1 v2.1: RSA Cryptography |
| * Specifications</em> it is advised to keep both hashes the |
| * same. |
| */ |
| int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| unsigned char *sig ); |
| |
| /** |
| * \brief This function performs a public RSA operation and checks |
| * the message digest. |
| * |
| * This is the generic wrapper for performing a PKCS#1 |
| * verification using the mode from the context. |
| * |
| * \param ctx The RSA public key context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param sig The buffer holding the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * set to #MBEDTLS_RSA_PUBLIC. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PRIVATE and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 if the verify operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| * |
| * \note For PKCS#1 v2.1 encoding, see comments on |
| * mbedtls_rsa_rsassa_pss_verify() about \p md_alg and |
| * \p hash_id. |
| */ |
| int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| const unsigned char *sig ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v1.5 verification |
| * operation (RSASSA-PKCS1-v1_5-VERIFY). |
| * |
| * \param ctx The RSA public key context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param sig The buffer holding the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * set to #MBEDTLS_RSA_PUBLIC. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PRIVATE and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 if the verify operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| */ |
| int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| const unsigned char *sig ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v2.1 PSS verification |
| * operation (RSASSA-PSS-VERIFY). |
| * |
| * The hash function for the MGF mask generating function |
| * is that specified in the RSA context. |
| * |
| * \param ctx The RSA public key context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param sig The buffer holding the ciphertext. |
| * |
| * \deprecated It is deprecated and discouraged to call this function |
| * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library |
| * are likely to remove the \p mode argument and have it |
| * implicitly set to #MBEDTLS_RSA_PUBLIC. |
| * |
| * \note Alternative implementations of RSA need not support |
| * mode being set to #MBEDTLS_RSA_PRIVATE and might instead |
| * return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION. |
| * |
| * \return \c 0 if the verify operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| * |
| * \note The \p hash_id in the RSA context is the one used for the |
| * verification. \p md_alg in the function call is the type of |
| * hash that is verified. According to <em>RFC-3447: Public-Key |
| * Cryptography Standards (PKCS) #1 v2.1: RSA Cryptography |
| * Specifications</em> it is advised to keep both hashes the |
| * same. If \p hash_id in the RSA context is unset, |
| * the \p md_alg from the function call is used. |
| */ |
| int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| const unsigned char *sig ); |
| |
| /** |
| * \brief This function performs a PKCS#1 v2.1 PSS verification |
| * operation (RSASSA-PSS-VERIFY). |
| * |
| * The hash function for the MGF mask generating function |
| * is that specified in \p mgf1_hash_id. |
| * |
| * \param ctx The RSA public key context. |
| * \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE. |
| * \param p_rng The RNG parameter. |
| * \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. |
| * \param md_alg The message-digest algorithm used to hash the original data. |
| * Use #MBEDTLS_MD_NONE for signing raw data. |
| * \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE. |
| * \param hash The buffer holding the message digest. |
| * \param mgf1_hash_id The message digest used for mask generation. |
| * \param expected_salt_len The length of the salt used in padding. Use |
| * #MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length. |
| * \param sig The buffer holding the ciphertext. |
| * |
| * \return \c 0 if the verify operation was successful, |
| * or an \c MBEDTLS_ERR_RSA_XXX error code |
| * on failure. |
| * |
| * \note The \p sig buffer must be as large as the size |
| * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. |
| * |
| * \note The \p hash_id in the RSA context is ignored. |
| */ |
| int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng, |
| int mode, |
| mbedtls_md_type_t md_alg, |
| unsigned int hashlen, |
| const unsigned char *hash, |
| mbedtls_md_type_t mgf1_hash_id, |
| int expected_salt_len, |
| const unsigned char *sig ); |
| |
| /** |
| * \brief This function copies the components of an RSA context. |
| * |
| * \param dst The destination context. |
| * \param src The source context. |
| * |
| * \return \c 0 on success, |
| * #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory allocation failure. |
| */ |
| int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src ); |
| |
| /** |
| * \brief This function frees the components of an RSA key. |
| * |
| * \param ctx The RSA Context to free. |
| */ |
| void mbedtls_rsa_free( mbedtls_rsa_context *ctx ); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #else /* MBEDTLS_RSA_ALT */ |
| #include "rsa_alt.h" |
| #endif /* MBEDTLS_RSA_ALT */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * \brief The RSA checkup routine. |
| * |
| * \return \c 0 on success, or \c 1 on failure. |
| */ |
| int mbedtls_rsa_self_test( int verbose ); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* rsa.h */ |
