| # Copyright 2016 Google Inc. All Rights Reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| from fontTools.cu2qu import curve_to_quadratic |
| from fontTools.pens.basePen import AbstractPen, decomposeSuperBezierSegment |
| from fontTools.pens.reverseContourPen import ReverseContourPen |
| from fontTools.pens.pointPen import BasePointToSegmentPen |
| from fontTools.pens.pointPen import ReverseContourPointPen |
| |
| |
| class Cu2QuPen(AbstractPen): |
| """ A filter pen to convert cubic bezier curves to quadratic b-splines |
| using the FontTools SegmentPen protocol. |
| |
| other_pen: another SegmentPen used to draw the transformed outline. |
| max_err: maximum approximation error in font units. For optimal results, |
| if you know the UPEM of the font, we recommend setting this to a |
| value equal, or close to UPEM / 1000. |
| reverse_direction: flip the contours' direction but keep starting point. |
| stats: a dictionary counting the point numbers of quadratic segments. |
| ignore_single_points: don't emit contours containing only a single point |
| |
| NOTE: The "ignore_single_points" argument is deprecated since v1.3.0, |
| which dropped Robofab subpport. It's no longer needed to special-case |
| UFO2-style anchors (aka "named points") when using ufoLib >= 2.0, |
| as these are no longer drawn onto pens as single-point contours, |
| but are handled separately as anchors. |
| """ |
| |
| def __init__(self, other_pen, max_err, reverse_direction=False, |
| stats=None, ignore_single_points=False): |
| if reverse_direction: |
| self.pen = ReverseContourPen(other_pen) |
| else: |
| self.pen = other_pen |
| self.max_err = max_err |
| self.stats = stats |
| if ignore_single_points: |
| import warnings |
| warnings.warn("ignore_single_points is deprecated and " |
| "will be removed in future versions", |
| UserWarning, stacklevel=2) |
| self.ignore_single_points = ignore_single_points |
| self.start_pt = None |
| self.current_pt = None |
| |
| def _check_contour_is_open(self): |
| if self.current_pt is None: |
| raise AssertionError("moveTo is required") |
| |
| def _check_contour_is_closed(self): |
| if self.current_pt is not None: |
| raise AssertionError("closePath or endPath is required") |
| |
| def _add_moveTo(self): |
| if self.start_pt is not None: |
| self.pen.moveTo(self.start_pt) |
| self.start_pt = None |
| |
| def moveTo(self, pt): |
| self._check_contour_is_closed() |
| self.start_pt = self.current_pt = pt |
| if not self.ignore_single_points: |
| self._add_moveTo() |
| |
| def lineTo(self, pt): |
| self._check_contour_is_open() |
| self._add_moveTo() |
| self.pen.lineTo(pt) |
| self.current_pt = pt |
| |
| def qCurveTo(self, *points): |
| self._check_contour_is_open() |
| n = len(points) |
| if n == 1: |
| self.lineTo(points[0]) |
| elif n > 1: |
| self._add_moveTo() |
| self.pen.qCurveTo(*points) |
| self.current_pt = points[-1] |
| else: |
| raise AssertionError("illegal qcurve segment point count: %d" % n) |
| |
| def _curve_to_quadratic(self, pt1, pt2, pt3): |
| curve = (self.current_pt, pt1, pt2, pt3) |
| quadratic = curve_to_quadratic(curve, self.max_err) |
| if self.stats is not None: |
| n = str(len(quadratic) - 2) |
| self.stats[n] = self.stats.get(n, 0) + 1 |
| self.qCurveTo(*quadratic[1:]) |
| |
| def curveTo(self, *points): |
| self._check_contour_is_open() |
| n = len(points) |
| if n == 3: |
| # this is the most common case, so we special-case it |
| self._curve_to_quadratic(*points) |
| elif n > 3: |
| for segment in decomposeSuperBezierSegment(points): |
| self._curve_to_quadratic(*segment) |
| elif n == 2: |
| self.qCurveTo(*points) |
| elif n == 1: |
| self.lineTo(points[0]) |
| else: |
| raise AssertionError("illegal curve segment point count: %d" % n) |
| |
| def closePath(self): |
| self._check_contour_is_open() |
| if self.start_pt is None: |
| # if 'start_pt' is _not_ None, we are ignoring single-point paths |
| self.pen.closePath() |
| self.current_pt = self.start_pt = None |
| |
| def endPath(self): |
| self._check_contour_is_open() |
| if self.start_pt is None: |
| self.pen.endPath() |
| self.current_pt = self.start_pt = None |
| |
| def addComponent(self, glyphName, transformation): |
| self._check_contour_is_closed() |
| self.pen.addComponent(glyphName, transformation) |
| |
| |
| class Cu2QuPointPen(BasePointToSegmentPen): |
| """ A filter pen to convert cubic bezier curves to quadratic b-splines |
| using the RoboFab PointPen protocol. |
| |
| other_point_pen: another PointPen used to draw the transformed outline. |
| max_err: maximum approximation error in font units. For optimal results, |
| if you know the UPEM of the font, we recommend setting this to a |
| value equal, or close to UPEM / 1000. |
| reverse_direction: reverse the winding direction of all contours. |
| stats: a dictionary counting the point numbers of quadratic segments. |
| """ |
| |
| def __init__(self, other_point_pen, max_err, reverse_direction=False, |
| stats=None): |
| BasePointToSegmentPen.__init__(self) |
| if reverse_direction: |
| self.pen = ReverseContourPointPen(other_point_pen) |
| else: |
| self.pen = other_point_pen |
| self.max_err = max_err |
| self.stats = stats |
| |
| def _flushContour(self, segments): |
| assert len(segments) >= 1 |
| closed = segments[0][0] != "move" |
| new_segments = [] |
| prev_points = segments[-1][1] |
| prev_on_curve = prev_points[-1][0] |
| for segment_type, points in segments: |
| if segment_type == 'curve': |
| for sub_points in self._split_super_bezier_segments(points): |
| on_curve, smooth, name, kwargs = sub_points[-1] |
| bcp1, bcp2 = sub_points[0][0], sub_points[1][0] |
| cubic = [prev_on_curve, bcp1, bcp2, on_curve] |
| quad = curve_to_quadratic(cubic, self.max_err) |
| if self.stats is not None: |
| n = str(len(quad) - 2) |
| self.stats[n] = self.stats.get(n, 0) + 1 |
| new_points = [(pt, False, None, {}) for pt in quad[1:-1]] |
| new_points.append((on_curve, smooth, name, kwargs)) |
| new_segments.append(["qcurve", new_points]) |
| prev_on_curve = sub_points[-1][0] |
| else: |
| new_segments.append([segment_type, points]) |
| prev_on_curve = points[-1][0] |
| if closed: |
| # the BasePointToSegmentPen.endPath method that calls _flushContour |
| # rotates the point list of closed contours so that they end with |
| # the first on-curve point. We restore the original starting point. |
| new_segments = new_segments[-1:] + new_segments[:-1] |
| self._drawPoints(new_segments) |
| |
| def _split_super_bezier_segments(self, points): |
| sub_segments = [] |
| # n is the number of control points |
| n = len(points) - 1 |
| if n == 2: |
| # a simple bezier curve segment |
| sub_segments.append(points) |
| elif n > 2: |
| # a "super" bezier; decompose it |
| on_curve, smooth, name, kwargs = points[-1] |
| num_sub_segments = n - 1 |
| for i, sub_points in enumerate(decomposeSuperBezierSegment([ |
| pt for pt, _, _, _ in points])): |
| new_segment = [] |
| for point in sub_points[:-1]: |
| new_segment.append((point, False, None, {})) |
| if i == (num_sub_segments - 1): |
| # the last on-curve keeps its original attributes |
| new_segment.append((on_curve, smooth, name, kwargs)) |
| else: |
| # on-curves of sub-segments are always "smooth" |
| new_segment.append((sub_points[-1], True, None, {})) |
| sub_segments.append(new_segment) |
| else: |
| raise AssertionError( |
| "expected 2 control points, found: %d" % n) |
| return sub_segments |
| |
| def _drawPoints(self, segments): |
| pen = self.pen |
| pen.beginPath() |
| last_offcurves = [] |
| for i, (segment_type, points) in enumerate(segments): |
| if segment_type in ("move", "line"): |
| assert len(points) == 1, ( |
| "illegal line segment point count: %d" % len(points)) |
| pt, smooth, name, kwargs = points[0] |
| pen.addPoint(pt, segment_type, smooth, name, **kwargs) |
| elif segment_type == "qcurve": |
| assert len(points) >= 2, ( |
| "illegal qcurve segment point count: %d" % len(points)) |
| offcurves = points[:-1] |
| if offcurves: |
| if i == 0: |
| # any off-curve points preceding the first on-curve |
| # will be appended at the end of the contour |
| last_offcurves = offcurves |
| else: |
| for (pt, smooth, name, kwargs) in offcurves: |
| pen.addPoint(pt, None, smooth, name, **kwargs) |
| pt, smooth, name, kwargs = points[-1] |
| if pt is None: |
| # special quadratic contour with no on-curve points: |
| # we need to skip the "None" point. See also the Pen |
| # protocol's qCurveTo() method and fontTools.pens.basePen |
| pass |
| else: |
| pen.addPoint(pt, segment_type, smooth, name, **kwargs) |
| else: |
| # 'curve' segments must have been converted to 'qcurve' by now |
| raise AssertionError( |
| "unexpected segment type: %r" % segment_type) |
| for (pt, smooth, name, kwargs) in last_offcurves: |
| pen.addPoint(pt, None, smooth, name, **kwargs) |
| pen.endPath() |
| |
| def addComponent(self, baseGlyphName, transformation): |
| assert self.currentPath is None |
| self.pen.addComponent(baseGlyphName, transformation) |