These are the first check-ins for the libexpat task: create configuration
files and setup for building a shareable libexpat.
diff --git a/expat/.gitignore b/expat/.gitignore
index e3996ad..7d88a99 100755
--- a/expat/.gitignore
+++ b/expat/.gitignore
@@ -1,8 +1,11 @@
-bin
-dbgbin
-Debug
-expat.ncb
-expat.opt
-Release
-expat.zip
-lib
+Makefile
+configure
+config.cache
+config.log
+config.status
+config.h
+expat-[0-9]*.[0-9]*
+expat*.tar.gz
+libtool
+*~
+
diff --git a/expat/copying.txt b/expat/COPYING
similarity index 95%
rename from expat/copying.txt
rename to expat/COPYING
index bf0f567..fc97b02 100644
--- a/expat/copying.txt
+++ b/expat/COPYING
@@ -1,4 +1,5 @@
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
+ and Clark Cooper
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
diff --git a/expat/ChangeLog b/expat/ChangeLog
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/expat/ChangeLog
diff --git a/expat/Makefile b/expat/Makefile
deleted file mode 100755
index 79f4c7c..0000000
--- a/expat/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-CC=gcc
-# If you know what your system's byte order is, define XML_BYTE_ORDER:
-# use -DXML_BYTE_ORDER=12 for little-endian byte order;
-# use -DXML_BYTE_ORDER=21 for big-endian (network) byte order.
-# -DXML_NS adds support for checking of lexical aspects of XML namespaces spec
-# -DXML_MIN_SIZE makes a smaller but slower parser
-# -DXML_DTD adds full support for parsing DTDs
-CFLAGS=-Wall -O2 -Ixmltok -Ixmlparse -DXML_NS -DXML_DTD
-AR=ar
-# Use one of the next two lines; unixfilemap is better if it works.
-FILEMAP_OBJ=xmlwf/unixfilemap.o
-#FILEMAP_OBJ=xmlwf/readfilemap.o
-LIBOBJS=xmltok/xmltok.o \
- xmltok/xmlrole.o \
- xmlparse/xmlparse.o
-
-OBJS=xmlwf/xmlwf.o \
- xmlwf/xmlfile.o \
- xmlwf/codepage.o \
- $(FILEMAP_OBJ)
-LIB=xmlparse/libexpat.a
-EXE=
-XMLWF=xmlwf/xmlwf$(EXE)
-
-all: $(XMLWF)
-
-$(XMLWF): $(OBJS) $(LIB)
- $(CC) $(CFLAGS) -o $@ $(OBJS) $(LIB)
-
-$(LIB): $(LIBOBJS)
- $(AR) rc $(LIB) $(LIBOBJS)
-
-clean:
- rm -f $(OBJS) $(LIBOBJS) $(LIB) $(XMLWF)
-
-xmltok/nametab.h: gennmtab/gennmtab$(EXE)
- rm -f $@
- gennmtab/gennmtab$(EXE) >$@
-
-gennmtab/gennmtab$(EXE): gennmtab/gennmtab.c
- $(CC) $(CFLAGS) -o $@ gennmtab/gennmtab.c
-
-xmltok/xmltok.o: xmltok/nametab.h
-
-.c.o:
- $(CC) $(CFLAGS) -c -o $@ $<
diff --git a/expat/Makefile.in b/expat/Makefile.in
new file mode 100644
index 0000000..a6b9e0f
--- /dev/null
+++ b/expat/Makefile.in
@@ -0,0 +1,158 @@
+################################################################
+# Process this file with top-level configure script to produce Makefile
+#
+# Copyright 2000 Clark Cooper
+#
+# This file is part of EXPAT.
+#
+# EXPAT is free software; you can redistribute it and/or modify it
+# under the terms of the License (based on the MIT/X license) contained
+# in the file COPYING that comes with this distribution.
+#
+# EXPAT IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+# SOFTWARE OR THE USE OR OTHER DEALINGS IN EXPAT.
+#
+# ---
+# I started using automake, but
+# 1) it seemed like overkill
+# 2) I don't want all the GNU policies
+# 3) I wanted more explicit control over what gets built
+#
+# So I'm doing my Makefile.in files manually. But a fair part is based
+# on what I learned from perusing the Makefile.in's generated by automake,
+# and the automake authors still get my kudos.
+#
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+top_builddir = .
+
+
+AUTOCONF = autoconf
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+CC = @CC@
+
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+SUBDIRS = lib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+CONFIG_HEADERS = @CONFIG_HEADERS@
+DIST_COMMON = ChangeLog COPYING README Makefile.in aclocal.m4 config.hin \
+ configure configure.in conftools doc examples xmlwf
+
+DISTDIR = $(PACKAGE)-$(VERSION)
+DISTRIBUTION = $(DISTDIR).tar.gz
+
+all: $(SUBDIRS)
+
+.PHONY: all $(SUBDIRS) clean distclean maintainer-clean dist install \
+ uninstall distdir
+
+Makefile: Makefile.in config.status
+ CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) config.status
+
+config.status: configure
+ @if test -f $@; then \
+ $(SHELL) config.status --recheck ; \
+ else \
+ $(SHELL) configure ; \
+ fi
+
+configure: configure.in
+ $(AUTOCONF)
+
+config.h: config.hin config.status
+ CONFIG_FILES= CONFIG_HEADERS=$(CONFIG_HEADERS) \
+ $(SHELL) ./config.status
+
+$(SUBDIRS): config.status
+ $(MAKE) -C $@
+
+
+clean:
+ @list='$(SUBDIRS)'; for dir in $$list; do \
+ $(MAKE) -C $$dir clean; \
+ done
+
+distclean:
+ @list='$(SUBDIRS)'; for dir in $$list; do \
+ $(MAKE) -C $$dir distclean; \
+ done
+ rm -f config.h config.status libtool
+
+maintainer-clean: distclean
+ rm -f $(DISTRIBUTION)
+ rm -rf $(DISTDIR)
+
+distdir: $(DIST_COMMON) clean
+ test -d $(DISTDIR) || mkdir $(DISTDIR)
+ @list='$(SUBDIRS)'; for dir in $$list; do \
+ test -d $(DISTDIR)/$$dir || mkdir $(DISTDIR)/$$dir; \
+ $(MAKE) -C $$dir distdir; \
+ done
+ @for file in $(DIST_COMMON); do \
+ if test -d $$file; then \
+ cp -prf $$file $(DISTDIR)/$$file; \
+ else \
+ test -f $(DISTDIR)/$$file \
+ || ln $$file $(DISTDIR)/$$file 2> /dev/null \
+ || cp -p $$file $(DISTDIR)/$$file || :; \
+ fi; \
+ done
+
+$(DISTRIBUTION): distdir
+ tar cfz $(DISTRIBUTION) $(DISTDIR)
+
+dist: $(DISTRIBUTION)
+
+install:
+ @list='$(SUBDIRS)'; for dir in $$list; do \
+ $(MAKE) -C $$dir install; \
+ done
+
+uninstall:
+ @list='$(SUBDIRS)'; for dir in $$list; do \
+ $(MAKE) -C $$dir uninstall; \
+ done
diff --git a/expat/README b/expat/README
new file mode 100644
index 0000000..3274cbc
--- /dev/null
+++ b/expat/README
@@ -0,0 +1,45 @@
+
+ Expat, Release 2.00
+
+This is expat, the C library for parsing XML, written by James Clark. Expat
+is a stream oriented XML parser. This means that you register handlers with
+the parser prior to starting the parse. These handlers are called when
+the parser discovers the associated structures in the document being parsed.
+A start tag is an example of the kind of structures for which you may
+register handlers.
+
+Expat is free software. You may copy, distribute, and modify it under the
+terms of the License contained in the file, COPYING, distributed with this
+package. This license is the same as the MIT/X Consortium license.
+
+To build expat, you first run the configuration shell script in the top
+level distribution directory:
+
+ ./configure
+
+There are many options which you may provide to configure (which you can
+discover by running configure with the --help option.) But the one of most
+interest is the one that sets the installation directory. By default,
+the configure script will set things up to install libexpat into
+/usr/local/lib and expat.h into /usr/local/include. If, for example, you'd
+prefer to install into /home/me/mystuff/lib and /home/me/mystuff/include,
+you can tell configure about that with:
+
+ ./configure --prefix=/home/me/mystuff
+
+After running the configure script, the "make" command will build things and
+"make install" will install things into their proper location. Note that
+you need to have write permission into the directories into which things
+will be installed.
+
+A reference manual is available in the doc/reference.html in this
+distribution.
+
+The homepage for this project is http://expat.sourceforge.net. There are
+links there to connect you to the bug reports page. If you need to report
+a bug when you don't have access to a browser, you may also send a bug
+report by email to expat-bugs@lists.sourceforge.net.
+
+Discussion related to the direction of future expat development takes place
+on expat-discuss@lists.sourceforge.net. Archives of this list may be found
+at http://www.geocrawler.com/redir-sf.php3?list=expat-discuss.
diff --git a/expat/aclocal.m4 b/expat/aclocal.m4
new file mode 100644
index 0000000..983268b
--- /dev/null
+++ b/expat/aclocal.m4
@@ -0,0 +1,425 @@
+## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
+ else
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments. Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!). If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
diff --git a/expat/config.hin b/expat/config.hin
new file mode 100644
index 0000000..c8aff0e
--- /dev/null
+++ b/expat/config.hin
@@ -0,0 +1,70 @@
+/*================================================================
+** Copyright 2000, Clark Cooper
+** All rights reserved.
+**
+** This is free software. You are permitted to copy, distribute, or modify
+** it under the terms of the MIT/X license (contained in the COPYING file
+** with this distribution.)
+**
+**
+*/
+
+/* Define to empty if the keyword does not work. */
+#undef const
+
+/* Define if you have a working `mmap' system call. */
+#undef HAVE_MMAP
+
+/* Define to `long' if <sys/types.h> doesn't define. */
+#undef off_t
+
+/* Define to `unsigned' if <sys/types.h> doesn't define. */
+#undef size_t
+
+/* Define if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define if your processor stores words with the most significant
+ byte first (like Motorola and SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Define if you have the bcopy function. */
+#undef HAVE_BCOPY
+
+/* Define if you have the getpagesize function. */
+#undef HAVE_GETPAGESIZE
+
+/* Define if you have the memmove function. */
+#undef HAVE_MEMMOVE
+
+/* Define if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Version number of package */
+#undef VERSION
+
+#include <stdlib.h>
+
+#define XML_NS
+#define XML_DTD
+
+#ifdef WORDS_BIGENDIAN
+#define XML_BYTE_ORDER 21
+#else
+#define XML_BYTE_ORDER 12
+#endif
+
+#ifndef HAVE_MEMMOVE
+#ifdef HAVE_BCOPY
+#define memmove(d,s,l) bcopy((s),(d),(l))
+#else
+#define memmove(d,s,l) ;punting on memmove;
+#endif
+#endif
+
diff --git a/expat/configure.in b/expat/configure.in
new file mode 100644
index 0000000..c88b78a
--- /dev/null
+++ b/expat/configure.in
@@ -0,0 +1,58 @@
+dnl configuration script for expat
+dnl Process this file with autoconf to produce a configure script.
+dnl
+dnl Copyright 2000 Clark Cooper
+dnl
+dnl This file is part of EXPAT.
+dnl
+dnl EXPAT is free software; you can redistribute it and/or modify it
+dnl under the terms of the License (based on the MIT/X license) contained
+dnl in the file COPYING that comes with this distribution.
+dnl
+
+AC_INIT(Makefile.in)
+AC_CONFIG_AUX_DIR(conftools)
+
+EXPAT_MAJOR_VERSION=2
+EXPAT_MINOR_VERSION=0
+EXPAT_VERSION=$EXPAT_MAJOR_VERSION.$EXPAT_MINOR_VERSION
+VERSION=$EXPAT_VERSION
+PACKAGE=expat
+
+AC_CONFIG_HEADER(config.h:config.hin)
+AC_PROG_LIBTOOL
+
+AC_SUBST(PACKAGE)
+AC_SUBST(VERSION)
+AC_SUBST(CONFIG_HEADERS)
+
+dnl Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+
+dnl Checks for libraries.
+
+dnl Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS(fcntl.h unistd.h)
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+AC_C_BIGENDIAN
+AC_C_CONST
+AC_TYPE_OFF_T
+AC_TYPE_SIZE_T
+
+dnl Checks for library functions.
+
+AC_FUNC_MEMCMP
+AC_FUNC_MMAP
+AC_SUBST(FILEMAP_OBJ)
+if test -z "$HAVE_MMAP"; then
+FILEMAP_OBJ=unixfilemap.o
+else
+FILEMAP_OBJ=readfilemap.o
+fi
+
+AC_CHECK_FUNCS(memmove bcopy)
+
+AC_OUTPUT(Makefile lib/Makefile xmlwf/Makefile examples/Makefile)
diff --git a/expat/conftools/config.guess b/expat/conftools/config.guess
new file mode 100755
index 0000000..0ce538b
--- /dev/null
+++ b/expat/conftools/config.guess
@@ -0,0 +1,1183 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+ if test x"$HOST_CC" != x; then
+ CC_FOR_BUILD="$HOST_CC"
+ else
+ if test x"$CC" != x; then
+ CC_FOR_BUILD="$CC"
+ else
+ CC_FOR_BUILD=cc
+ fi
+ fi
+fi
+
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # Netbsd (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ # Determine the machine/vendor (is the vendor relevant).
+ case "${UNAME_MACHINE}" in
+ amiga) machine=m68k-cbm ;;
+ arm32) machine=arm-unknown ;;
+ atari*) machine=m68k-atari ;;
+ sun3*) machine=m68k-sun ;;
+ mac68k) machine=m68k-apple ;;
+ macppc) machine=powerpc-apple ;;
+ hp3[0-9][05]) machine=m68k-hp ;;
+ ibmrt|romp-ibm) machine=romp-ibm ;;
+ *) machine=${UNAME_MACHINE}-unknown ;;
+ esac
+ # The Operating System including object format.
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ # The OS release
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ cat <<EOF >$dummy.s
+ .data
+\$Lformat:
+ .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+
+ .text
+ .globl main
+ .align 4
+ .ent main
+main:
+ .frame \$30,16,\$26,0
+ ldgp \$29,0(\$27)
+ .prologue 1
+ .long 0x47e03d80 # implver \$0
+ lda \$2,-1
+ .long 0x47e20c21 # amask \$2,\$1
+ lda \$16,\$Lformat
+ mov \$0,\$17
+ not \$1,\$18
+ jsr \$26,printf
+ ldgp \$29,0(\$26)
+ mov 0,\$16
+ jsr \$26,exit
+ .end main
+EOF
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ case `./$dummy` in
+ 0-0)
+ UNAME_MACHINE="alpha"
+ ;;
+ 1-0)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 1-1)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 1-101)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 2-303)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ 2-307)
+ UNAME_MACHINE="alphaev67"
+ ;;
+ esac
+ fi
+ rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-cbm-sysv4
+ exit 0;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ arc64:OpenBSD:*:*)
+ echo mips64el-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hkmips:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ SR2?01:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit 0 ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy \
+ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i?86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:4)
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=4.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[34678]??:HP-UX:*:*)
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+ rm -f $dummy.c $dummy
+ esac
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ *9??*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ i?86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ hppa*:OpenBSD:*:*)
+ echo hppa-unknown-openbsd
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*X-MP:*:*:*)
+ echo xmp-cray-unicos
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY-2:*:*:*)
+ echo cray2-cray-unicos
+ exit 0 ;;
+ F300:UNIX_System_V:*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+ F301:UNIX_System_V:*:*)
+ echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i386-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ *:Linux:*:*)
+
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ ld_help_string=`cd /; ld --help 2>&1`
+ ld_supported_emulations=`echo $ld_help_string \
+ | sed -ne '/supported emulations:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported emulations: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_emulations" in
+ *ia64)
+ echo "${UNAME_MACHINE}-unknown-linux"
+ exit 0
+ ;;
+ i?86linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0
+ ;;
+ elf_i?86)
+ echo "${UNAME_MACHINE}-pc-linux"
+ exit 0
+ ;;
+ i?86coff)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0
+ ;;
+ sparclinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ armlinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32arm*)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+ exit 0
+ ;;
+ armelf_linux*)
+ echo "${UNAME_MACHINE}-unknown-linux-gnu"
+ exit 0
+ ;;
+ m68klinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32ppc | elf32ppclinux)
+ # Determine Lib Version
+ cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+ int argc;
+ char *argv[];
+{
+#if defined(__GLIBC__)
+ printf("%s %s\n", __libc_version, __libc_release);
+#else
+ printf("unkown\n");
+#endif
+ return 0;
+}
+EOF
+ LIBC=""
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ ./$dummy | grep 1\.99 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f $dummy.c $dummy
+ echo powerpc-unknown-linux-gnu${LIBC}
+ exit 0
+ ;;
+ esac
+
+ if test "${UNAME_MACHINE}" = "alpha" ; then
+ cat <<EOF >$dummy.s
+ .data
+ \$Lformat:
+ .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+
+ .text
+ .globl main
+ .align 4
+ .ent main
+ main:
+ .frame \$30,16,\$26,0
+ ldgp \$29,0(\$27)
+ .prologue 1
+ .long 0x47e03d80 # implver \$0
+ lda \$2,-1
+ .long 0x47e20c21 # amask \$2,\$1
+ lda \$16,\$Lformat
+ mov \$0,\$17
+ not \$1,\$18
+ jsr \$26,printf
+ ldgp \$29,0(\$26)
+ mov 0,\$16
+ jsr \$26,exit
+ .end main
+EOF
+ LIBC=""
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ case `./$dummy` in
+ 0-0)
+ UNAME_MACHINE="alpha"
+ ;;
+ 1-0)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 1-1)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 1-101)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 2-303)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ 2-307)
+ UNAME_MACHINE="alphaev67"
+ ;;
+ esac
+
+ objdump --private-headers $dummy | \
+ grep ld.so.1 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+ elif test "${UNAME_MACHINE}" = "mips" ; then
+ cat >$dummy.c <<EOF
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+ printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+ printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ elif test "${UNAME_MACHINE}" = "s390"; then
+ echo s390-ibm-linux && exit 0
+ else
+ # Either a pre-BFD a.out linker (linux-gnuoldld)
+ # or one that does not give us useful --help.
+ # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+ # If ld does not provide *any* "supported emulations:"
+ # that means it is gnuoldld.
+ echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+ test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+ case "${UNAME_MACHINE}" in
+ i?86)
+ VENDOR=pc;
+ ;;
+ *)
+ VENDOR=unknown;
+ ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+# if __GLIBC__ >= 2
+ printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+ printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+ i?86:DYNIX/ptx:4*:*)
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i?86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit 0 ;;
+ i?86:*:5:7*)
+ # Fixed at (any) Pentium or better
+ UNAME_MACHINE=i586
+ if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+ echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ i?86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+ i?86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ m68*:LynxOS:2.*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:*:6*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+ echo `uname -p`-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ if test "${UNAME_MACHINE}" = "x86pc"; then
+ UNAME_MACHINE=pc
+ fi
+ echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+ NSR-W:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit 0 ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+ printf ("vax-dec-bsd\n"); exit (0);
+#else
+ printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1
diff --git a/expat/conftools/config.sub b/expat/conftools/config.sub
new file mode 100755
index 0000000..c8e7785
--- /dev/null
+++ b/expat/conftools/config.sub
@@ -0,0 +1,1268 @@
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Free Software Foundation, Inc.
+#
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+ echo Configuration name missing. 1>&2
+ echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+ echo "or $0 ALIAS" 1>&2
+ echo where ALIAS is a recognized configuration type. 1>&2
+ exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+ *local*)
+ echo $1
+ exit 0
+ ;;
+ *)
+ ;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple)
+ os=
+ basic_machine=$1
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+ | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+ | 580 | i960 | h8300 \
+ | x86 | ppcbe | mipsbe | mipsle | shbe | shle | armbe | armle \
+ | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+ | hppa64 \
+ | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+ | alphaev6[78] \
+ | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+ | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+ | mips64orion | mips64orionel | mipstx39 | mipstx39el \
+ | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+ | mips64vr5000 | miprs64vr5000el | mcore \
+ | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+ | thumb | d10v | fr30 | avr)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i[34567]86)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ # FIXME: clean up the formatting here.
+ vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+ | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+ | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+ | xmp-* | ymp-* \
+ | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* | armbe-* | armle-* \
+ | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+ | hppa2.0n-* | hppa64-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+ | alphaev6[78]-* \
+ | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+ | clipper-* | orion-* \
+ | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+ | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+ | mips64el-* | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+ | mipstx39-* | mipstx39el-* | mcore-* \
+ | f301-* | armv*-* | s390-* | sv1-* | t3e-* \
+ | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+ | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
+ | bs2000-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-cbm
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-cbm
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-cbm
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ cray2)
+ basic_machine=cray2-cray
+ os=-unicos
+ ;;
+ [ctj]90-cray)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i[34567]86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i[34567]86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i[34567]86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i[34567]86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ i386-go32 | go32)
+ basic_machine=i386-unknown
+ os=-go32
+ ;;
+ i386-mingw32 | mingw32)
+ basic_machine=i386-unknown
+ os=-mingw32
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mipsel*-linux*)
+ basic_machine=mipsel-unknown
+ os=-linux-gnu
+ ;;
+ mips*-linux*)
+ basic_machine=mips-unknown
+ os=-linux-gnu
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ mmix*)
+ basic_machine=mmix-knuth
+ os=-mmixware
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ msdos)
+ basic_machine=i386-unknown
+ os=-msdos
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5 | k5 | k6 | nexen)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexen-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=rs6000-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sparclite-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=t3e-cray
+ os=-unicos
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xmp)
+ basic_machine=xmp-cray
+ os=-unicos
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ mips)
+ if [ x$os = x-linux-gnu ]; then
+ basic_machine=mips-unknown
+ else
+ basic_machine=mips-mips
+ fi
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sparc | sparcv9)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ c4x*)
+ basic_machine=c4x-none
+ os=-coff
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i[34567]86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto*)
+ os=-nto-qnx
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -*MiNT)
+ os=-mint
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f301-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -vxsim* | -vxworks*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -*MiNT)
+ vendor=atari
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
diff --git a/expat/conftools/install-sh b/expat/conftools/install-sh
new file mode 100755
index 0000000..e9de238
--- /dev/null
+++ b/expat/conftools/install-sh
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+else
+ true
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=mkdir
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f $src -o -d $src ]
+ then
+ true
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ true
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ true
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ true
+ fi
+
+ pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ true
+ fi
+
+# Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd $src $dsttmp &&
+
+ trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
+
+fi &&
+
+
+exit 0
diff --git a/expat/conftools/ltconfig b/expat/conftools/ltconfig
new file mode 100755
index 0000000..c14d83c
--- /dev/null
+++ b/expat/conftools/ltconfig
@@ -0,0 +1,3114 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
+# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) PATH_SEPARATOR=';' ;;
+ *) PATH_SEPARATOR=':' ;;
+ esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
+ test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running ltconfig again with it.
+ ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ echo='printf "%s\n"'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+ test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+ CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+ test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.3.5
+TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+nonopt=
+ofile="$default_ofile"
+verify_host=yes
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+objext=o
+libext=a
+exeext=
+cache_file=
+
+old_AR="$AR"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LIBS="$LIBS"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_AS="$AS"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+ case "$option" in
+ -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ eval "$prev=\$option"
+ prev=
+ continue
+ fi
+
+ case "$option" in
+ --help) cat <<EOM
+Usage: $progname [OPTION]... [HOST [LTMAIN]]
+
+Generate a system-specific libtool script.
+
+ --debug enable verbose shell tracing
+ --disable-shared do not build shared libraries
+ --disable-static do not build static libraries
+ --disable-fast-install do not optimize for fast installation
+ --enable-dlopen enable dlopen support
+ --enable-win32-dll enable building dlls on win32 hosts
+ --help display this help and exit
+ --no-verify do not verify that HOST is a valid host type
+-o, --output=FILE specify the output file [default=$default_ofile]
+ --quiet same as \`--silent'
+ --silent do not print informational messages
+ --srcdir=DIR find \`config.guess' in DIR
+ --version output version information and exit
+ --with-gcc assume that the GNU C compiler will be used
+ --with-gnu-ld assume that the C compiler uses the GNU linker
+ --disable-lock disable file locking
+ --cache-file=FILE configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+ exit 0
+ ;;
+
+ --debug)
+ echo "$progname: enabling shell trace mode"
+ set -x
+ ;;
+
+ --disable-shared) enable_shared=no ;;
+
+ --disable-static) enable_static=no ;;
+
+ --disable-fast-install) enable_fast_install=no ;;
+
+ --enable-dlopen) enable_dlopen=yes ;;
+
+ --enable-win32-dll) enable_win32_dll=yes ;;
+
+ --quiet | --silent) silent=yes ;;
+
+ --srcdir) prev=srcdir ;;
+ --srcdir=*) srcdir="$optarg" ;;
+
+ --no-verify) verify_host=no ;;
+
+ --output | -o) prev=ofile ;;
+ --output=*) ofile="$optarg" ;;
+
+ --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+ --with-gcc) with_gcc=yes ;;
+ --with-gnu-ld) with_gnu_ld=yes ;;
+
+ --disable-lock) need_locks=no ;;
+
+ --cache-file=*) cache_file="$optarg" ;;
+
+ -*)
+ echo "$progname: unrecognized option \`$option'" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ ;;
+
+ *)
+ if test -z "$ltmain"; then
+ ltmain="$option"
+ elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+# echo "$progname: warning \`$option' is not a valid host type" 1>&2
+# fi
+ host="$option"
+ else
+ echo "$progname: too many arguments" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi ;;
+ esac
+done
+
+if test -z "$ltmain"; then
+ echo "$progname: you must specify a LTMAIN file" 1>&2
+ echo "$help" 1>&2
+ exit 1
+fi
+
+if test ! -f "$ltmain"; then
+ echo "$progname: \`$ltmain' does not exist" 1>&2
+ echo "$help" 1>&2
+ exit 1
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+ case "$arg" in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ltconfig_args="$ltconfig_args '$arg'" ;;
+ *) ltconfig_args="$ltconfig_args $arg" ;;
+ esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi
+
+if test -n "$cache_file" && test -r "$cache_file"; then
+ echo "loading cache $cache_file within ltconfig"
+ . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+ # Assume the source directory is the same one as the path to LTMAIN.
+ srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+ test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+ # Check for config.guess and config.sub.
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/config.guess; then
+ ac_aux_dir=$ac_dir
+ break
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+ echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi
+ ac_config_guess=$ac_aux_dir/config.guess
+ ac_config_sub=$ac_aux_dir/config.sub
+
+ # Make sure we can run config.sub.
+ if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+ else
+ echo "$progname: cannot run $ac_config_sub" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi
+
+ echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+ host_alias=$host
+ case "$host_alias" in
+ "")
+ if host_alias=`$SHELL $ac_config_guess`; then :
+ else
+ echo "$progname: cannot guess host type; you must specify one" 1>&2
+ echo "$help" 1>&2
+ exit 1
+ fi ;;
+ esac
+ host=`$SHELL $ac_config_sub $host_alias`
+ echo "$ac_t$host" 1>&6
+
+ # Make sure the host verified.
+ test -z "$host" && exit 1
+
+elif test -z "$host"; then
+ echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+ echo "$help" 1>&2
+ exit 1
+else
+ host_alias=$host
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+case "$host_os" in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR cru $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+# Set a sane default for `AR'.
+test -z "$AR" && AR=ar
+
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+# If RANLIB is not set, then run the test.
+if test "${RANLIB+set}" != "set"; then
+ result=no
+
+ echo $ac_n "checking for ranlib... $ac_c" 1>&6
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
+ RANLIB="ranlib"
+ result="ranlib"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ echo "$ac_t$result" 1>&6
+fi
+
+if test -n "$RANLIB"; then
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$AS" && AS=as
+
+# Check to see if we are using GCC.
+if test "$with_gcc" != yes || test -z "$CC"; then
+ # If CC is not set, then try to find GCC or a usable CC.
+ if test -z "$CC"; then
+ echo $ac_n "checking for gcc... $ac_c" 1>&6
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
+ CC="gcc"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test -n "$CC"; then
+ echo "$ac_t$CC" 1>&6
+ else
+ echo "$ac_t"no 1>&6
+ fi
+ fi
+
+ # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+ if test -z "$CC"; then
+ echo $ac_n "checking for cc... $ac_c" 1>&6
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ cc_rejected=no
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
+ if test "$dir/cc" = "/usr/ucb/cc"; then
+ cc_rejected=yes
+ continue
+ fi
+ CC="cc"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test $cc_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same name, so the bogon will be chosen
+ # first if we set CC to just the name; use the full file name.
+ shift
+ set dummy "$dir/cc" "$@"
+ shift
+ CC="$@"
+ fi
+ fi
+
+ if test -n "$CC"; then
+ echo "$ac_t$CC" 1>&6
+ else
+ echo "$ac_t"no 1>&6
+ fi
+
+ if test -z "$CC"; then
+ echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+ exit 1
+ fi
+ fi
+
+ # Now see if the compiler is really GCC.
+ with_gcc=no
+ echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+ echo "$progname:581: checking whether we are using GNU C" >&5
+
+ $rm conftest.c
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+ if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ with_gcc=yes
+ fi
+ $rm conftest.c
+ echo "$ac_t$with_gcc" 1>&6
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo $ac_n "checking for object suffix... $ac_c" 1>&6
+$rm conftest*
+echo 'int i = 1;' > conftest.c
+echo "$progname:603: checking for object suffix" >& 5
+if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+ # Append any warnings to the config.log.
+ cat conftest.err 1>&5
+
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ cat conftest.err 1>&5
+ echo "$progname: failed program was:" >&5
+ cat conftest.c >&5
+fi
+$rm conftest*
+echo "$ac_t$objext" 1>&6
+
+echo $ac_n "checking for executable suffix... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_exeext="no"
+ $rm conftest*
+ echo 'main () { return 0; }' > conftest.c
+ echo "$progname:629: checking for executable suffix" >& 5
+ if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
+ # Append any warnings to the config.log.
+ cat conftest.err 1>&5
+
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c | *.err | *.$objext ) ;;
+ *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+ else
+ cat conftest.err 1>&5
+ echo "$progname: failed program was:" >&5
+ cat conftest.c >&5
+ fi
+ $rm conftest*
+fi
+if test "X$ac_cv_exeext" = Xno; then
+ exeext=""
+else
+ exeext="$ac_cv_exeext"
+fi
+echo "$ac_t$ac_cv_exeext" 1>&6
+
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+pic_flag=
+special_shlib_compile_flags=
+wl=
+link_static_flag=
+no_builtin_flag=
+
+if test "$with_gcc" = yes; then
+ wl='-Wl,'
+ link_static_flag='-static'
+
+ case "$host_os" in
+ beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ aix*)
+ # Below there is a dirty hack to force normal static linking with -ldl
+ # The problem is because libdl dynamically linked with both libc and
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+ # we not sure about C++ programs.
+ link_static_flag="$link_static_flag ${wl}-lC"
+ ;;
+ cygwin* | mingw* | os2*)
+ # We can build DLLs from non-PIC.
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ pic_flag='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ pic_flag=-Kconform_pic
+ fi
+ ;;
+ *)
+ pic_flag='-fPIC'
+ ;;
+ esac
+else
+ # PORTME Check for PIC flags for the system compiler.
+ case "$host_os" in
+ aix3* | aix4*)
+ # All AIX code is PIC.
+ link_static_flag='-bnso -bI:/lib/syscalls.exp'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ # Is there a better link_static_flag that works with the bundled CC?
+ wl='-Wl,'
+ link_static_flag="${wl}-a ${wl}archive"
+ pic_flag='+Z'
+ ;;
+
+ irix5* | irix6*)
+ wl='-Wl,'
+ link_static_flag='-non_shared'
+ # PIC (with -KPIC) is the default.
+ ;;
+
+ cygwin* | mingw* | os2*)
+ # We can build DLLs from non-PIC.
+ ;;
+
+ osf3* | osf4* | osf5*)
+ # All OSF/1 code is PIC.
+ wl='-Wl,'
+ link_static_flag='-non_shared'
+ ;;
+
+ sco3.2v5*)
+ pic_flag='-Kpic'
+ link_static_flag='-dn'
+ special_shlib_compile_flags='-belf'
+ ;;
+
+ solaris*)
+ pic_flag='-KPIC'
+ link_static_flag='-Bstatic'
+ wl='-Wl,'
+ ;;
+
+ sunos4*)
+ pic_flag='-PIC'
+ link_static_flag='-Bstatic'
+ wl='-Qoption ld '
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ pic_flag='-KPIC'
+ link_static_flag='-Bstatic'
+ wl='-Wl,'
+ ;;
+
+ uts4*)
+ pic_flag='-pic'
+ link_static_flag='-Bstatic'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ pic_flag='-Kconform_pic'
+ link_static_flag='-Bstatic'
+ fi
+ ;;
+ *)
+ can_build_shared=no
+ ;;
+ esac
+fi
+
+if test -n "$pic_flag"; then
+ echo "$ac_t$pic_flag" 1>&6
+
+ # Check to make sure the pic_flag actually works.
+ echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+ $rm conftest*
+ echo "int some_variable = 0;" > conftest.c
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pic_flag -DPIC"
+ echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
+ if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+ # Append any warnings to the config.log.
+ cat conftest.err 1>&5
+
+ case "$host_os" in
+ hpux9* | hpux10* | hpux11*)
+ # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+ # create non-PIC objects. So, if there were any warnings, we assume that
+ # PIC is not supported.
+ if test -s conftest.err; then
+ echo "$ac_t"no 1>&6
+ can_build_shared=no
+ pic_flag=
+ else
+ echo "$ac_t"yes 1>&6
+ pic_flag=" $pic_flag"
+ fi
+ ;;
+ *)
+ echo "$ac_t"yes 1>&6
+ pic_flag=" $pic_flag"
+ ;;
+ esac
+ else
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ can_build_shared=no
+ pic_flag=
+ echo "$ac_t"no 1>&6
+ fi
+ CFLAGS="$save_CFLAGS"
+ $rm conftest*
+else
+ echo "$ac_t"none 1>&6
+fi
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+$rm conftest*
+echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory. Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
+
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+ echo "$ac_t"no 1>&6
+ compiler_c_o=no
+ else
+ echo "$ac_t"yes 1>&6
+ compiler_c_o=yes
+ fi
+else
+ # Append any errors to the config.log.
+ cat out/conftest.err 1>&5
+ compiler_c_o=no
+ echo "$ac_t"no 1>&6
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+if test x"$compiler_c_o" = x"yes"; then
+ # Check to see if we can write to a .lo
+ echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
+ $rm conftest*
+ echo "int some_variable = 0;" > conftest.c
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
+ echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ echo "$ac_t"no 1>&6
+ compiler_o_lo=no
+ else
+ echo "$ac_t"yes 1>&6
+ compiler_o_lo=yes
+ fi
+ else
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ compiler_o_lo=no
+ echo "$ac_t"no 1>&6
+ fi
+ CFLAGS="$save_CFLAGS"
+ $rm conftest*
+else
+ compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ echo "$ac_t$hard_links" 1>&6
+ $rm conftest*
+ if test "$hard_links" = no; then
+ echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+ echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+ $rm conftest*
+ echo "int some_variable = 0;" > conftest.c
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
+ echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ echo "$ac_t"no 1>&6
+ compiler_rtti_exceptions=no
+ else
+ echo "$ac_t"yes 1>&6
+ compiler_rtti_exceptions=yes
+ fi
+ else
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ compiler_rtti_exceptions=no
+ echo "$ac_t"no 1>&6
+ fi
+ CFLAGS="$save_CFLAGS"
+ $rm conftest*
+
+ if test "$compiler_rtti_exceptions" = "yes"; then
+ no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+ else
+ no_builtin_flag=' -fno-builtin'
+ fi
+
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$special_shlib_compile_flags"; then
+ echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+ if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then :
+ else
+ echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+ can_build_shared=no
+ fi
+fi
+
+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+$rm conftest*
+echo 'main(){return(0);}' > conftest.c
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $link_static_flag"
+echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ echo "$ac_t$link_static_flag" 1>&6
+else
+ echo "$ac_t"none 1>&6
+ link_static_flag=
+fi
+LDFLAGS="$save_LDFLAGS"
+$rm conftest*
+
+if test -z "$LN_S"; then
+ # Check to see if we can use ln -s, or we need hard links.
+ echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+ $rm conftest.dat
+ if ln -s X conftest.dat 2>/dev/null; then
+ $rm conftest.dat
+ LN_S="ln -s"
+ else
+ LN_S=ln
+ fi
+ if test "$LN_S" = "ln -s"; then
+ echo "$ac_t"yes 1>&6
+ else
+ echo "$ac_t"no 1>&6
+ fi
+fi
+
+# Make sure LD is an absolute path.
+if test -z "$LD"; then
+ ac_prog=ld
+ if test "$with_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+ echo "$progname:991: checking for ld used by GCC" >&5
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we are not using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+ elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+ echo "$progname:1015: checking for GNU ld" >&5
+ else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+ echo "$progname:1018: checking for non-GNU ld" >&5
+ fi
+
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ fi
+
+ if test -n "$LD"; then
+ echo "$ac_t$LD" 1>&6
+ else
+ echo "$ac_t"no 1>&6
+ fi
+
+ if test -z "$LD"; then
+ echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+ exit 1
+ fi
+fi
+
+# Check to see if it really is or is not GNU ld.
+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+echo "$ac_t$with_gnu_ld" 1>&6
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced. Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+
+case "$host_os" in
+cygwin* | mingw*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$with_gcc" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # See if GNU ld supports shared libraries.
+ case "$host_os" in
+ aix3* | aix4*)
+ # On AIX, the GNU linker is very broken
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+
+ # Extract the symbol export list from an `--export-all' def file,
+ # then regenerate the def file from the symbol export list, so that
+ # the compiled dll only exports the symbol export list.
+ # Be careful not to strip the DATA tag left by newer dlltools.
+ export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+ test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+ $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs $convenience~
+ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $objdir/$soname-def > $export_symbols'
+
+ # If DATA tags from a recent dlltool are present, honour them!
+ archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
+ _lt_hint=1;
+ cat $export_symbols | while read symbol; do
+ set dummy \$symbol;
+ case \$# in
+ 2) echo " \$2 @ \$_lt_hint ; " >> $objdir/$soname-def;;
+ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $objdir/$soname-def;;
+ esac;
+ _lt_hint=`expr 1 + \$_lt_hint`;
+ done~
+ test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+ test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+ $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+ $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+ $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
+
+ old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a'
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+ # can we support soname and/or expsyms with a.out? -oliva
+ fi
+ ;;
+
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = yes; then
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ case $host_os in
+ cygwin* | mingw*)
+ # dlltool doesn't understand --whole-archive et. al.
+ whole_archive_flag_spec=
+ ;;
+ *)
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ ;;
+ esac
+ fi
+else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case "$host_os" in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix4*)
+ hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+ hardcode_libdir_separator=':'
+ if test "$with_gcc" = yes; then
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ shared_flag='-shared'
+ else
+ shared_flag='${wl}-bM:SRE'
+ hardcode_direct=yes
+ fi
+ allow_undefined_flag=' ${wl}-berok'
+ archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+ archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+ case "$host_os" in aix4.[01]|aix4.[01].*)
+ # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+ always_export_symbols=yes ;;
+ esac
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ cygwin* | mingw*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+ fix_srcfile_path='`cygpath -w $srcfile`'
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ case "$host_os" in
+ hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+ *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ irix5* | irix6*)
+ if test "$with_gcc" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF
+ fi
+ hardcode_libdir_flag_spec='${wl}-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ openbsd*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # As osf3* with the addition of the -msym flag
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ rhapsody*)
+ archive_cmds='$CC -bundle -undefined suppress -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flags_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sco3.2v5*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case "$host_os" in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $linkopts'
+ else
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ fi
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv5*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+ hardcode_libdir_flag_spec=
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4.2uw2*)
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=no
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
+
+ unixware7*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+if test -z "$NM"; then
+ echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+ case "$NM" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ NM="$ac_dir/nm -B"
+ break
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ NM="$ac_dir/nm -p"
+ break
+ else
+ NM=${NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$NM" && NM=nm
+ ;;
+ esac
+ echo "$ac_t$NM" 1>&6
+fi
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*) # Its linker distinguishes data from code symbols
+ global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+ ;;
+irix*)
+ symcode='[BCDEGRST]'
+ ;;
+solaris*)
+ symcode='[BDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+ symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Write the raw and C identifiers.
+ global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+ $rm conftest*
+ cat > conftest.c <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+ echo "$progname:1653: checking if global_symbol_pipe works" >&5
+ if { (eval echo $progname:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { echo "$progname:1657: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+ if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
+
+ cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+ sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
+ cat <<\EOF >> conftest.c
+ {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$objext conftstm.$objext
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+ if { (eval echo $progname:1709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ pipe_works=yes
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.c >&5
+ fi
+ LIBS="$save_LIBS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.c >&5
+ fi
+ $rm conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ global_symbol_pipe=
+ fi
+done
+if test "$pipe_works" = yes; then
+ echo "${ac_t}ok" 1>&6
+else
+ echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+ global_symbol_to_cdecl=
+fi
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var"; then
+
+ # We can hardcode non-existant directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$hardcode_shlibpath_var" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+
+reload_flag=
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+# PORTME Some linkers may need a different reload flag.
+reload_flag='-r'
+echo "$ac_t$reload_flag" 1>&6
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+file_magic_cmd=
+file_magic_test_file=
+deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}.so$major'
+ ;;
+
+aix4*)
+ version_type=linux
+ # AIX has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ # We preserve .a as extension for shared libraries though AIX4.2
+ # and later linker supports .so
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
+ shlibpath_var=LIBPATH
+ deplibs_check_method=pass_all
+ ;;
+
+amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+ ;;
+
+beos*)
+ library_names_spec='${libname}.so'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ deplibs_check_method=pass_all
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+bsdi4*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=/shlib/libc.so
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ export_dynamic_flag_spec=-rdynamic
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw*)
+ version_type=windows
+ need_version=no
+ need_lib_prefix=no
+ if test "$with_gcc" = yes; then
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
+ else
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+ fi
+ dynamic_linker='Win32 ld.exe'
+ deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ file_magic_cmd='${OBJDUMP} -f'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+ case "$version_type" in
+ freebsd-elf*)
+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=`echo /usr/lib/libc.so*`
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ deplibs_check_method=unknown
+ library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case "$host_os" in
+ freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ *) # from 3.2 on
+ shlibpath_overrides_runpath=no
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ dynamic_linker="$host_os dld.sl"
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+ soname_spec='${libname}${release}.sl$major'
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ case "$host_os" in
+ hpux10.20*)
+ # TODO: Does this work for hpux-11 too?
+ deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+irix5* | irix6*)
+ version_type=irix
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}.so.$major'
+ library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+ case "$host_os" in
+ irix5*)
+ libsuff= shlibsuff=
+ # this will be overridden with pass_all, but let us keep it just in case
+ deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ deplibs_check_method='pass_all'
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ deplibs_check_method=pass_all
+
+ if test -f /lib/ld.so.1; then
+ dynamic_linker='GNU ld.so'
+ else
+ # Only the GNU ld.so supports shared libraries on MkLinux.
+ case "$host_cpu" in
+ powerpc*) dynamic_linker=no ;;
+ *) dynamic_linker='Linux ld.so' ;;
+ esac
+ fi
+ ;;
+
+netbsd*)
+ version_type=sunos
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+openbsd*)
+ version_type=sunos
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ need_version=no
+ fi
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+os2*)
+ libname_spec='$name'
+ need_lib_prefix=no
+ library_names_spec='$libname.dll $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_version=no
+ soname_spec='${libname}${release}.so'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ # this will be overridden with pass_all, but let us keep it just in case
+ deplibs_check_method='file_magic COFF format alpha shared library'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=/shlib/libc.so
+ deplibs_check_method='pass_all'
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rhapsody*)
+ version_type=sunos
+ library_names_spec='${libname}.so'
+ soname_spec='${libname}.so'
+ shlibpath_var=DYLD_LIBRARY_PATH
+ deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ version_type=osf
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=/lib/libc.so
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case "$host_vendor" in
+ sequent)
+ file_magic_cmd='/bin/file'
+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ ncr)
+ deplibs_check_method='pass_all'
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+ soname_spec='$libname.so.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+ if test x$can_build_shared = xyes; then
+ test x$enable_win32_dll = xno && can_build_shared=no
+ echo "checking if package supports dlls... $can_build_shared" 1>&6
+ fi
+;;
+esac
+
+if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+fi
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+aix4*)
+ test "$enable_shared" = yes && enable_static=no
+ ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
+ lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:2248: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2256 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:2288: checking for dlopen" >&5
+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2293 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char dlopen(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_dlopen=yes"
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_dlopen=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:2335: checking for dld_link in -ldld" >&5
+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2343 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:2356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:2375: checking for shl_load" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2380 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shl_load(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_shl_load=yes"
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_shl_load=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="shl_load"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2423: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2431 "ltconfig"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:2445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+fi
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ fi
+
+ case "$lt_cv_dlopen" in
+ dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:2488: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2493 "ltconfig"
+#include <$ac_hdr>
+int fnord = 0;
+EOF
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:2498: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ if test "x$ac_cv_header_dlfcn_h" = xyes; then
+ CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ fi
+ eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2526: checking whether a program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self+set}" = set; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ lt_cv_dlopen_self=cross
+ else
+ cat > conftest.c <<EOF
+#line 2534 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LTDL_GLOBAL DL_GLOBAL
+# else
+# define LTDL_GLOBAL 0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LTDL_LAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LTDL_LAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LTDL_LAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LTDL_LAZY_OR_NOW DL_NOW
+# else
+# define LTDL_LAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+ if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+ if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }
+
+EOF
+if { (eval echo $progname:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+ lt_cv_dlopen_self=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+ if test "$lt_cv_dlopen_self" = yes; then
+ LDFLAGS="$LDFLAGS $link_static_flag"
+ echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2599: checking whether a statically linked program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ lt_cv_dlopen_self_static=cross
+ else
+ cat > conftest.c <<EOF
+#line 2607 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LTDL_GLOBAL DL_GLOBAL
+# else
+# define LTDL_GLOBAL 0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LTDL_LAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LTDL_LAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LTDL_LAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LTDL_LAZY_OR_NOW DL_NOW
+# else
+# define LTDL_LAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+ if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+ if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }
+
+EOF
+if { (eval echo $progname:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+ lt_cv_dlopen_self_static=yes
+else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+ ;;
+ esac
+
+ case "$lt_cv_dlopen_self" in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case "$lt_cv_dlopen_self_static" in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case "$ltmain" in
+*.sh)
+ # Now quote all the things that may contain metacharacters.
+ for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+ old_LD old_LDFLAGS old_LIBS \
+ old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+ AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+ reload_flag reload_cmds wl \
+ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+ thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+ library_names_spec soname_spec \
+ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
+ file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
+ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+ hardcode_libdir_flag_spec hardcode_libdir_separator \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+ case "$var" in
+ reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+ old_postinstall_cmds | old_postuninstall_cmds | \
+ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+ postinstall_cmds | postuninstall_cmds | \
+ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+ # Double-quote double-evaled strings.
+ eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+ ;;
+ *)
+ eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+ ;;
+ esac
+ done
+
+ case "$ltecho" in
+ *'\$0 --fallback-echo"')
+ ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+ ;;
+ esac
+
+ trap "$rm \"$ofile\"; exit 1" 1 2 15
+ echo "creating $ofile"
+ $rm "$ofile"
+ cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+### BEGIN LIBTOOL CONFIG
+EOF
+ cfgfile="$ofile"
+ ;;
+
+*)
+ # Double-quote the variables that need it (for aesthetics).
+ for var in old_CC old_CFLAGS old_CPPFLAGS \
+ old_LD old_LDFLAGS old_LIBS \
+ old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
+ eval "$var=\\\"\$var\\\""
+ done
+
+ # Just create a config file.
+ cfgfile="$ofile.cfg"
+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+ echo "creating $cfgfile"
+ $rm "$cfgfile"
+ cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+EOF
+ ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
+# $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+
+# The default C compiler.
+CC=$CC
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+case "$ltmain" in
+*.sh)
+ echo '### END LIBTOOL CONFIG' >> "$ofile"
+ echo >> "$ofile"
+ case "$host_os" in
+ aix3*)
+ cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+EOF
+ ;;
+ esac
+
+ # Append the ltmain.sh script.
+ sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+
+ chmod +x "$ofile"
+ ;;
+
+*)
+ # Compile the libtool program.
+ echo "FIXME: would compile $ltmain"
+ ;;
+esac
+
+test -n "$cache_file" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/expat/conftools/ltmain.sh b/expat/conftools/ltmain.sh
new file mode 100644
index 0000000..766732d
--- /dev/null
+++ b/expat/conftools/ltmain.sh
@@ -0,0 +1,4024 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell, and then maybe $echo will work.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.3.5
+TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+ save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+ echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ echo "$modename: not configured to build any kind of library" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+ arg="$1"
+ shift
+
+ case "$arg" in
+ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case "$prev" in
+ execute_dlfiles)
+ eval "$prev=\"\$$prev \$arg\""
+ ;;
+ *)
+ eval "$prev=\$arg"
+ ;;
+ esac
+
+ prev=
+ prevopt=
+ continue
+ fi
+
+ # Have we seen a non-optional argument yet?
+ case "$arg" in
+ --help)
+ show_help=yes
+ ;;
+
+ --version)
+ echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ exit 0
+ ;;
+
+ --config)
+ sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+ exit 0
+ ;;
+
+ --debug)
+ echo "$progname: enabling shell trace mode"
+ set -x
+ ;;
+
+ --dry-run | -n)
+ run=:
+ ;;
+
+ --features)
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+ exit 0
+ ;;
+
+ --finish) mode="finish" ;;
+
+ --mode) prevopt="--mode" prev=mode ;;
+ --mode=*) mode="$optarg" ;;
+
+ --quiet | --silent)
+ show=:
+ ;;
+
+ -dlopen)
+ prevopt="-dlopen"
+ prev=execute_dlfiles
+ ;;
+
+ -*)
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+
+ *)
+ nonopt="$arg"
+ break
+ ;;
+ esac
+done
+
+if test -n "$prevopt"; then
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+fi
+
+if test -z "$show_help"; then
+
+ # Infer the operation mode.
+ if test -z "$mode"; then
+ case "$nonopt" in
+ *cc | *++ | gcc* | *-gcc*)
+ mode=link
+ for arg
+ do
+ case "$arg" in
+ -c)
+ mode=compile
+ break
+ ;;
+ esac
+ done
+ ;;
+ *db | *dbx | *strace | *truss)
+ mode=execute
+ ;;
+ *install*|cp|mv)
+ mode=install
+ ;;
+ *rm)
+ mode=uninstall
+ ;;
+ *)
+ # If we have no mode, but dlfiles were specified, then do execute mode.
+ test -n "$execute_dlfiles" && mode=execute
+
+ # Just use the default operation mode.
+ if test -z "$mode"; then
+ if test -n "$nonopt"; then
+ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+ else
+ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+ fi
+ fi
+ ;;
+ esac
+ fi
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$modename --help --mode=$mode' for more information."
+
+ # These modes are in order of execution frequency so that they run quickly.
+ case "$mode" in
+ # libtool compile mode
+ compile)
+ modename="$modename: compile"
+ # Get the compilation command and the source file.
+ base_compile=
+ lastarg=
+ srcfile="$nonopt"
+ suppress_output=
+
+ user_target=no
+ for arg
+ do
+ # Accept any command-line options.
+ case "$arg" in
+ -o)
+ if test "$user_target" != "no"; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+ exit 1
+ fi
+ user_target=next
+ ;;
+
+ -static)
+ build_old_libs=yes
+ continue
+ ;;
+ esac
+
+ case "$user_target" in
+ next)
+ # The next one is the -o target name
+ user_target=yes
+ continue
+ ;;
+ yes)
+ # We got the output file
+ user_target=set
+ libobj="$arg"
+ continue
+ ;;
+ esac
+
+ # Accept the current argument as the source file.
+ lastarg="$srcfile"
+ srcfile="$arg"
+
+ # Aesthetically quote the previous argument.
+
+ # Backslashify any backslashes, double quotes, and dollar signs.
+ # These are the only characters that are still specially
+ # interpreted inside of double-quoted scrings.
+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly in scan
+ # sets, so we specify it separately.
+ case "$lastarg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ lastarg="\"$lastarg\""
+ ;;
+ esac
+
+ # Add the previous argument to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
+ done
+
+ case "$user_target" in
+ set)
+ ;;
+ no)
+ # Get the name of the library object.
+ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ ;;
+ *)
+ $echo "$modename: you must specify a target with \`-o'" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ xform='[cCFSfmso]'
+ case "$libobj" in
+ *.ada) xform=ada ;;
+ *.adb) xform=adb ;;
+ *.ads) xform=ads ;;
+ *.asm) xform=asm ;;
+ *.c++) xform=c++ ;;
+ *.cc) xform=cc ;;
+ *.cpp) xform=cpp ;;
+ *.cxx) xform=cxx ;;
+ *.f90) xform=f90 ;;
+ *.for) xform=for ;;
+ esac
+
+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+ case "$libobj" in
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *)
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if test -z "$base_compile"; then
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $libobj"
+ else
+ removelist="$libobj"
+ fi
+
+ $run $rm $removelist
+ trap "$run $rm $removelist; exit 1" 1 2 15
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+ trap "$run $rm $removelist; exit 1" 1 2 15
+ else
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until ln "$0" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+ echo $srcfile > "$lockfile"
+ fi
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ # All platforms use -DPIC, to notify preprocessed assembler code.
+ command="$base_compile $srcfile $pic_flag -DPIC"
+ if test "$build_old_libs" = yes; then
+ lo_libobj="$libobj"
+ dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$libobj"; then
+ dir="$objdir"
+ else
+ dir="$dir/$objdir"
+ fi
+ libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+ if test -d "$dir"; then
+ $show "$rm $libobj"
+ $run $rm $libobj
+ else
+ $show "$mkdir $dir"
+ $run $mkdir $dir
+ status=$?
+ if test $status -ne 0 && test ! -d $dir; then
+ exit $status
+ fi
+ fi
+ fi
+ if test "$compiler_o_lo" = yes; then
+ output_obj="$libobj"
+ command="$command -o $output_obj"
+ elif test "$compiler_c_o" = yes; then
+ output_obj="$obj"
+ command="$command -o $output_obj"
+ fi
+
+ $run $rm "$output_obj"
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ test -n "$output_obj" && $run $rm $removelist
+ exit 1
+ fi
+
+ if test "$need_locks" = warn &&
+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test x"$output_obj" != x"$libobj"; then
+ $show "$mv $output_obj $libobj"
+ if $run $mv $output_obj $libobj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # If we have no pic_flag, then copy the object into place and finish.
+ if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+ # Rename the .lo from within objdir to obj
+ if test -f $obj; then
+ $show $rm $obj
+ $run $rm $obj
+ fi
+
+ $show "$mv $libobj $obj"
+ if $run $mv $libobj $obj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$obj"; then
+ xdir="."
+ else
+ xdir="$xdir"
+ fi
+ baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+ libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+ # Now arrange that obj and lo_libobj become the same file
+ $show "(cd $xdir && $LN_S $baseobj $libobj)"
+ if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+ exit 0
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # Allow error messages only from the first compilation.
+ suppress_output=' >/dev/null 2>&1'
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ command="$base_compile $srcfile"
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ output_obj="$obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+ $run $rm "$output_obj"
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ $run $rm $removelist
+ exit 1
+ fi
+
+ if test "$need_locks" = warn &&
+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+
+ # Just move the object if needed
+ if test x"$output_obj" != x"$obj"; then
+ $show "$mv $output_obj $obj"
+ if $run $mv $output_obj $obj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we do not
+ # accidentally link it into a program.
+ if test "$build_libtool_libs" != yes; then
+ $show "echo timestamp > $libobj"
+ $run eval "echo timestamp > \$libobj" || exit $?
+ else
+ # Move the .lo from within objdir
+ $show "$mv $libobj $lo_libobj"
+ if $run $mv $libobj $lo_libobj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+ fi
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ $rm "$lockfile"
+ fi
+
+ exit 0
+ ;;
+
+ # libtool link mode
+ link)
+ modename="$modename: link"
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-os2*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invokation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+
+ # This is a source program that is used to create dlls on Windows
+ # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# # ifdef __CYGWIN32__
+# # define __CYGWIN__ __CYGWIN32__
+# # endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+# __hDllInstance_base = hInst;
+# return TRUE;
+# }
+# /* ltdll.c ends here */
+ # This is a source program that is used to create import libraries
+ # on Windows for dlls which lack them. Don't remove nor modify the
+ # starting and closing comments
+# /* impgen.c starts here */
+# /* Copyright (C) 1999 Free Software Foundation, Inc.
+#
+# This file is part of GNU libtool.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# */
+#
+# #include <stdio.h> /* for printf() */
+# #include <unistd.h> /* for open(), lseek(), read() */
+# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
+# #include <string.h> /* for strdup() */
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[2];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 2);
+# return b[0] + (b[1]<<8);
+# }
+#
+# static unsigned int
+# pe_get32 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[4];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 4);
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+# void *ptr;
+# {
+# unsigned char *b = ptr;
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+# int argc;
+# char *argv[];
+# {
+# int dll;
+# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+# unsigned long export_rva, export_size, nsections, secptr, expptr;
+# unsigned long name_rvas, nexp;
+# unsigned char *expdata, *erva;
+# char *filename, *dll_name;
+#
+# filename = argv[1];
+#
+# dll = open(filename, O_RDONLY|O_BINARY);
+# if (!dll)
+# return 1;
+#
+# dll_name = filename;
+#
+# for (i=0; filename[i]; i++)
+# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
+# dll_name = filename + i +1;
+#
+# pe_header_offset = pe_get32 (dll, 0x3c);
+# opthdr_ofs = pe_header_offset + 4 + 20;
+# num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+# if (num_entries < 1) /* no exports */
+# return 1;
+#
+# export_rva = pe_get32 (dll, opthdr_ofs + 96);
+# export_size = pe_get32 (dll, opthdr_ofs + 100);
+# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+# secptr = (pe_header_offset + 4 + 20 +
+# pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+# expptr = 0;
+# for (i = 0; i < nsections; i++)
+# {
+# char sname[8];
+# unsigned long secptr1 = secptr + 40 * i;
+# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# lseek(dll, secptr1, SEEK_SET);
+# read(dll, sname, 8);
+# if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# {
+# expptr = fptr + (export_rva - vaddr);
+# if (export_rva + export_size > vaddr + vsize)
+# export_size = vsize - (export_rva - vaddr);
+# break;
+# }
+# }
+#
+# expdata = (unsigned char*)malloc(export_size);
+# lseek (dll, expptr, SEEK_SET);
+# read (dll, expdata, export_size);
+# erva = expdata - export_rva;
+#
+# nexp = pe_as32 (expdata+24);
+# name_rvas = pe_as32 (expdata+32);
+#
+# printf ("EXPORTS\n");
+# for (i = 0; i<nexp; i++)
+# {
+# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+# }
+#
+# return 0;
+# }
+# /* impgen.c ends here */
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ compile_command="$nonopt"
+ finalize_command="$nonopt"
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ linkopts=
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ lib_search_path=
+ fi
+ # now prepend the system-specific ones
+ eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ avoid_version=no
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ link_against_libtool_libs=
+ ltlibs=
+ module=no
+ objs=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case "$arg" in
+ -all-static | -static)
+ if test "X$arg" = "X-all-static"; then
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ else
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ fi
+ build_libtool_libs=no
+ build_old_libs=yes
+ prefer_static_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test $# -gt 0; do
+ arg="$1"
+ shift
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case "$prev" in
+ output)
+ compile_command="$compile_command @OUTPUT@"
+ finalize_command="$finalize_command @OUTPUT@"
+ ;;
+ esac
+
+ case "$prev" in
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ compile_command="$compile_command @SYMFILE@"
+ finalize_command="$finalize_command @SYMFILE@"
+ preload=yes
+ fi
+ case "$arg" in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ else
+ dlprefiles="$dlprefiles $arg"
+ fi
+ prev=
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+ exit 1
+ fi
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case "$arg" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit 1
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) rpath="$rpath $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) xrpath="$xrpath $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi
+
+ prevarg="$arg"
+
+ case "$arg" in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ compile_command="$compile_command $link_static_flag"
+ finalize_command="$finalize_command $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+ continue
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: not more than one -exported-symbols argument allowed"
+ exit 1
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -L*)
+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ # We need an absolute path.
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ absdir="$dir"
+ fi
+ dir="$absdir"
+ ;;
+ esac
+ case " $deplibs " in
+ *" $arg "*) ;;
+ *) deplibs="$deplibs $arg";;
+ esac
+ case " $lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir";;
+ esac
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-os2*)
+ dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+ case ":$dllsearchpath:" in
+ ::) dllsearchpath="$dllsearchdir";;
+ *":$dllsearchdir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+ esac
+ ;;
+ esac
+ ;;
+
+ -l*)
+ if test "$arg" = "-lc"; then
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+ # These systems don't actually have c library (as such)
+ continue
+ ;;
+ esac
+ elif test "$arg" = "-lm"; then
+ case "$host" in
+ *-*-cygwin* | *-*-beos*)
+ # These systems don't actually have math library (as such)
+ continue
+ ;;
+ esac
+ fi
+ deplibs="$deplibs $arg"
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ # We need an absolute path.
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit 1
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ continue
+ ;;
+
+ -static)
+ # If we have no pic_flag, then this is the same as -all-static.
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ compile_command="$compile_command $link_static_flag"
+ finalize_command="$finalize_command $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+
+ *.o | *.obj | *.a | *.lib)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
+
+ *.lo)
+ # A library object.
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+ prev=
+ fi
+ libobjs="$libobjs $arg"
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ dlname=
+ libdir=
+ library_names=
+ old_library=
+
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variable installed.
+ installed=yes
+
+ # Read the .la file
+ # If there is no directory component, then add one.
+ case "$arg" in
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
+ esac
+
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+ exit 1
+ fi
+
+ # Find the relevant object directory and library name.
+ name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+
+ if test "X$installed" = Xyes; then
+ dir="$libdir"
+ else
+ dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$arg"; then
+ dir="$objdir"
+ else
+ dir="$dir/$objdir"
+ fi
+ fi
+
+ if test -n "$dependency_libs"; then
+ # Extract -R and -L from dependency_libs
+ temp_deplibs=
+ for deplib in $dependency_libs; do
+ case "$deplib" in
+ -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ case " $rpath $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ -L*) case "$compile_command $temp_deplibs " in
+ *" $deplib "*) ;;
+ *) temp_deplibs="$temp_deplibs $deplib";;
+ esac
+ temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ case " $lib_search_path " in
+ *" $temp_dir "*) ;;
+ *) lib_search_path="$lib_search_path $temp_dir";;
+ esac
+ ;;
+ *) temp_deplibs="$temp_deplibs $deplib";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ if test -z "$libdir"; then
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $dir/$old_library"
+ old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$deplibs$dependency_libs"
+ compile_command="$compile_command $dir/$old_library$dependency_libs"
+ finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+ continue
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking statically,
+ # we need to preload.
+ prev=dlprefiles
+ else
+ # We should not create a dependency on this library, but we
+ # may need any libraries it requires.
+ compile_command="$compile_command$dependency_libs"
+ finalize_command="$finalize_command$dependency_libs"
+ prev=
+ continue
+ fi
+ fi
+
+ # The library was specified with -dlpreopen.
+ if test "$prev" = dlprefiles; then
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ dlprefiles="$dlprefiles $dir/$old_library"
+ else
+ dlprefiles="$dlprefiles $dir/$linklib"
+ fi
+ prev=
+ fi
+
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ link_against_libtool_libs="$link_against_libtool_libs $arg"
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *) temp_rpath="$temp_rpath $dir" ;;
+ esac
+ fi
+
+ # We need an absolute path.
+ case "$dir" in
+ [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ absdir="$dir"
+ fi
+ ;;
+ esac
+
+ # This is the magic to use -rpath.
+ # Skip directories that are in the system default run-time
+ # search path, unless they have been requested with -R.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+
+ lib_linked=yes
+ case "$hardcode_action" in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ compile_command="$compile_command $dir/$linklib"
+ deplibs="$deplibs $dir/$linklib"
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-os2*)
+ dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+ if test -n "$dllsearchpath"; then
+ dllsearchpath="$dllsearchpath:$dllsearchdir"
+ else
+ dllsearchpath="$dllsearchdir"
+ fi
+ ;;
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case "$host" in
+ *-*-sunos*)
+ compile_shlibpath="$compile_shlibpath$dir:"
+ ;;
+ esac
+ case "$compile_command " in
+ *" -L$dir "*) ;;
+ *) compile_command="$compile_command -L$dir";;
+ esac
+ compile_command="$compile_command -l$name"
+ deplibs="$deplibs -L$dir -l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ case ":$compile_shlibpath:" in
+ *":$dir:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$dir:";;
+ esac
+ compile_command="$compile_command -l$name"
+ deplibs="$deplibs -l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+
+ relink)
+ if test "$hardcode_direct" = yes; then
+ compile_command="$compile_command $absdir/$linklib"
+ deplibs="$deplibs $absdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ case "$compile_command " in
+ *" -L$absdir "*) ;;
+ *) compile_command="$compile_command -L$absdir";;
+ esac
+ compile_command="$compile_command -l$name"
+ deplibs="$deplibs -L$absdir -l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case ":$compile_shlibpath:" in
+ *":$absdir:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$absdir:";;
+ esac
+ compile_command="$compile_command -l$name"
+ deplibs="$deplibs -l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+
+ *)
+ lib_linked=no
+ ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+ exit 1
+ fi
+
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes; then
+ finalize_command="$finalize_command $libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ case "$finalize_command " in
+ *" -L$libdir "*) ;;
+ *) finalize_command="$finalize_command -L$libdir";;
+ esac
+ finalize_command="$finalize_command -l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case ":$finalize_shlibpath:" in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
+ esac
+ finalize_command="$finalize_command -l$name"
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ case "$finalize_command " in
+ *" -L$dir "*) ;;
+ *) finalize_command="$finalize_command -L$libdir";;
+ esac
+ finalize_command="$finalize_command -l$name"
+ fi
+ else
+ # Transform directly to old archives if we don't build new libraries.
+ if test -n "$pic_flag" && test -z "$old_library"; then
+ $echo "$modename: cannot find static library for \`$arg'" 1>&2
+ exit 1
+ fi
+
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_command="$compile_command $dir/$linklib"
+ finalize_command="$finalize_command $dir/$linklib"
+ else
+ case "$compile_command " in
+ *" -L$dir "*) ;;
+ *) compile_command="$compile_command -L$dir";;
+ esac
+ compile_command="$compile_command -l$name"
+ case "$finalize_command " in
+ *" -L$dir "*) ;;
+ *) finalize_command="$finalize_command -L$dir";;
+ esac
+ finalize_command="$finalize_command -l$name"
+ fi
+ fi
+
+ # Add in any libraries that this one depends upon.
+ compile_command="$compile_command$dependency_libs"
+ finalize_command="$finalize_command$dependency_libs"
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+ esac
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+ done
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ libobjs_save="$libobjs"
+
+ case "$output" in
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+
+ *.a | *.lib)
+ if test -n "$link_against_libtool_libs"; then
+ $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+ exit 1
+ fi
+
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+ fi
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ ;;
+
+ *.la)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case "$outputname" in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ fi
+ ;;
+ esac
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+
+ if test -n "$objs"; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+ exit 1
+ fi
+
+ # How the heck are we supposed to write a wrapper for a shared library?
+ if test -n "$link_against_libtool_libs"; then
+ $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+ exit 1
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+ fi
+
+ set dummy $rpath
+ if test $# -gt 2; then
+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+ fi
+ install_libdir="$2"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ libext=al
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+ dependency_libs="$deplibs"
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+ fi
+ else
+
+ # Parse the version information argument.
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ IFS="$save_ifs"
+
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ current="$2"
+ revision="$3"
+ age="$4"
+
+ # Check that each of the things are valid numbers.
+ case "$current" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case "$revision" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case "$age" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if test $age -gt $current; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case "$version_type" in
+ none) ;;
+
+ irix)
+ major=`expr $current - $age + 1`
+ versuffix="$major.$revision"
+ verstring="sgi$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test $loop != 0; do
+ iface=`expr $revision - $loop`
+ loop=`expr $loop - 1`
+ verstring="sgi$major.$iface:$verstring"
+ done
+ ;;
+
+ linux)
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ major=`expr $current - $age`
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test $loop != 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current";
+ ;;
+
+ windows)
+ # Like Linux, but with '-' rather than '.', since we only
+ # want one extension on Windows 95.
+ major=`expr $current - $age`
+ versuffix="-$major-$age-$revision"
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ verstring="0.0"
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ dependency_libs="$deplibs"
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody*)
+ # rhapsody is a little odd...
+ deplibs="$deplibs -framework System"
+ ;;
+ *)
+ # Add libc to deplibs on all other systems.
+ deplibs="$deplibs -lc"
+ ;;
+ esac
+ fi
+
+ # Create the output directory, or remove our outputs if we need to.
+ if test -d $output_objdir; then
+ $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+ $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+ else
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ fi
+
+ if test "$build_libtool_libs" = yes; then
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case "$deplibs_check_method" in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behaviour.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $rm conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $rm conftest
+ $CC -o conftest conftest.c $deplibs
+ if test $? -eq 0 ; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ else
+ # Error occured in the first compile. Let's try to salvage the situation:
+ # Compile a seperate program for each library.
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" ; then
+ $rm conftest
+ $CC -o conftest conftest.c $i
+ # Did it work?
+ if test $? -eq 0 ; then
+ ldd_output=`ldd conftest`
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
+ for a_deplib in $deplibs; do
+ name="`expr $a_deplib : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null \
+ | grep " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+ case "$potliblink" in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+ | sed 10q \
+ | egrep "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ fi
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
+ grep . >/dev/null; then
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ fi
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ echo "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ # Get the real and link names of the library.
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ lib="$output_objdir/$realname"
+ for link
+ do
+ linknames="$linknames $link"
+ done
+
+ # Ensure that we have .o objects for linkers which dislike .lo
+ # (e.g. aix) in case we are running --disable-static
+ for obj in $libobjs; do
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$obj"; then
+ xdir="."
+ else
+ xdir="$xdir"
+ fi
+ baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+ if test ! -f $xdir/$oldobj; then
+ $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+ $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+ fi
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+ eval cmds=\"$export_symbols_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex"; then
+ $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+ $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+ $run eval '$mv "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+ fi
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${outputname}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "mkdir $gentop"
+ $run mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
+ for xlib in $convenience; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "mkdir $xdir"
+ $run mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+ done
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linkopts="$linkopts $flag"
+ fi
+
+ # Do each of the archive commands.
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval cmds=\"$archive_expsym_cmds\"
+ else
+ eval cmds=\"$archive_cmds\"
+ fi
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ *.lo | *.o | *.obj)
+ if test -n "$link_against_libtool_libs"; then
+ $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
+ exit 1
+ fi
+
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+ fi
+
+ case "$output" in
+ *.lo)
+ if test -n "$objs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+ exit 1
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $run $rm $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${obj}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "mkdir $gentop"
+ $run mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
+ for xlib in $convenience; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "mkdir $xdir"
+ $run mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+ done
+ fi
+ fi
+
+ # Create the old-style object.
+ reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
+
+ output="$obj"
+ eval cmds=\"$reload_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ exit 0
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ $show "echo timestamp > $libobj"
+ $run eval "echo timestamp > $libobj" || exit $?
+ exit 0
+ fi
+
+ if test -n "$pic_flag"; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ eval cmds=\"$reload_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ else
+ # Just create a symlink.
+ $show $rm $libobj
+ $run $rm $libobj
+ xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$libobj"; then
+ xdir="."
+ else
+ xdir="$xdir"
+ fi
+ baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+ $show "(cd $xdir && $LN_S $oldobj $baseobj)"
+ $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+ fi
+
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ exit 0
+ ;;
+
+ # Anything else should be a program.
+ *)
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+ fi
+
+ if test "$preload" = yes; then
+ if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
+ test "$dlopen_self_static" = unknown; then
+ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+ fi
+ fi
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$compile_rpath " in
+ *" $libdir "*) ;;
+ *) compile_rpath="$compile_rpath $libdir" ;;
+ esac
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+
+ # Create the binary in the object directory, then wrap it.
+ if test ! -d $output_objdir; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
+ fi
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ fi
+
+ dlsyms=
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ dlsyms="${outputname}S.c"
+ else
+ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+ fi
+ fi
+
+ if test -n "$dlsyms"; then
+ case "$dlsyms" in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${outputname}.nm"
+
+ $show "$rm $nlist ${nlist}S ${nlist}T"
+ $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+ # Parse the name list into a source file.
+ $show "creating $output_objdir/$dlsyms"
+
+ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ $show "generating symbol list for \`$output'"
+
+ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ for arg in $progfiles; do
+ $show "extracting global C symbols from \`$arg'"
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$output.exp"
+ $run $rm $export_symbols
+ $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ else
+ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval 'mv "$nlist"T "$nlist"'
+ fi
+ fi
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+ name=`echo "$arg" | sed -e 's%^.*/%%'`
+ $run eval 'echo ": $name " >> "$nlist"'
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -z "$run"; then
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $mv "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+ :
+ else
+ grep -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ fi
+
+ $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+ sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
+ -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
+ < "$nlist" >> "$output_objdir/$dlsyms"
+
+ $echo >> "$output_objdir/$dlsyms" "\
+ {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ fi
+
+ pic_flag_for_symtable=
+ case "$host" in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ case "$compile_command " in
+ *" -static "*) ;;
+ *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+ esac;;
+ *-*-hpux*)
+ case "$compile_command " in
+ *" -static "*) ;;
+ *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+ esac
+ esac
+
+ # Now compile the dynamic symbol file.
+ $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+ # Clean up the generated files.
+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+ # Transform the symbol file into the correct name.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+ exit 1
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+
+ if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ $show "$link_command"
+ $run eval "$link_command"
+ status=$?
+
+ # Delete the generated files.
+ if test -n "$dlsyms"; then
+ $show "$rm $output_objdir/${outputname}S.${objext}"
+ $run $rm "$output_objdir/${outputname}S.${objext}"
+ fi
+
+ exit $status
+ fi
+
+ if test -n "$shlibpath_var"; then
+ # We should set the shlibpath_var
+ rpath=
+ for dir in $temp_rpath; do
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*)
+ # Absolute path.
+ rpath="$rpath$dir:"
+ ;;
+ *)
+ # Relative path: add a thisdir entry.
+ rpath="$rpath\$thisdir/$dir:"
+ ;;
+ esac
+ done
+ temp_rpath="$rpath"
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+ $echo "$modename: \`$output' will be relinked during installation" 1>&2
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+
+ # Now create the wrapper script.
+ $show "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Quote $echo for shipping.
+ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+ case "$0" in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if our run command is non-null.
+ if test -z "$run"; then
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+ esac
+ $rm $output
+ trap "$rm $output; exit 1" 1 2 15
+
+ $echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variable:
+ link_against_libtool_libs='$link_against_libtool_libs'
+else
+ # When we are sourced in execute mode, \$file and \$echo are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ echo=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$echo works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$echo will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $echo >> $output "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+ done
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ echo >> $output "\
+ program=lt-'$outputname'
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" || \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $mkdir \"\$progdir\"
+ else
+ $rm \"\$progdir/\$file\"
+ fi"
+
+ echo >> $output "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if (cd \"\$thisdir\" && eval \$relink_command); then :
+ else
+ $rm \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $rm \"\$progdir/\$program\";
+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $rm \"\$progdir/\$file\"
+ fi"
+ else
+ echo >> $output "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ echo >> $output "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $echo >> $output "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $echo >> $output "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $echo >> $output "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # win32 systems need to use the prog path for dll
+ # lookup to work
+ *-*-cygwin*)
+ $echo >> $output "\
+ exec \$progdir/\$program \${1+\"\$@\"}
+"
+ ;;
+
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2*)
+ $echo >> $output "\
+ exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $echo >> $output "\
+ # Export the path to the program.
+ PATH=\"\$progdir:\$PATH\"
+ export PATH
+
+ exec \$program \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $echo >> $output "\
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+ exit 1
+ fi
+ else
+ # The program doesn't exist.
+ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+ echo \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+ chmod +x $output
+ fi
+ exit 0
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "mkdir $gentop"
+ $run mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
+ # Add in members from convenience archives.
+ for xlib in $addlibs; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "mkdir $xdir"
+ $run mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+ done
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ eval cmds=\"$old_archive_from_new_cmds\"
+ else
+ # Ensure that we have .o objects in place in case we decided
+ # not to build a shared library, and have fallen back to building
+ # static libs even though --disable-static was passed!
+ for oldobj in $oldobjs; do
+ if test ! -f $oldobj; then
+ xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$oldobj"; then
+ xdir="."
+ else
+ xdir="$xdir"
+ fi
+ baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+ obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+ $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+ $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+ fi
+ done
+
+ eval cmds=\"$old_archive_cmds\"
+ fi
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ done
+
+ if test -n "$generated"; then
+ $show "${rm}r$generated"
+ $run ${rm}r$generated
+ fi
+
+ # Now create the libtool archive.
+ case "$output" in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ $show "creating $output"
+
+ if test -n "$xrpath"; then
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ done
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+
+ # Only create the output if not a dry run.
+ if test -z "$run"; then
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ fi
+ $rm $output
+ $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'\
+"
+ done
+ fi
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+ $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
+ ;;
+ esac
+ exit 0
+ ;;
+
+ # libtool install mode
+ install)
+ modename="$modename: install"
+
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
+ # Aesthetically quote it.
+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$arg "
+ arg="$1"
+ shift
+ else
+ install_prog=
+ arg="$nonopt"
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog$arg"
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ for arg
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+ dest="$arg"
+ continue
+ fi
+
+ case "$arg" in
+ -d) isdir=yes ;;
+ -f) prev="-f" ;;
+ -g) prev="-g" ;;
+ -m) prev="-m" ;;
+ -o) prev="-o" ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*) ;;
+
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest="$arg"
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog $arg"
+ done
+
+ if test -z "$install_prog"; then
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ $echo "$modename: no file or destination specified" 1>&2
+ else
+ $echo "$modename: you must specify a destination" 1>&2
+ fi
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Strip any trailing slash from the destination.
+ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$destdir" = "X$dest" && destdir=.
+ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files
+ if test $# -gt 2; then
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+ fi
+ case "$destdir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case "$file" in
+ *.lo) ;;
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case "$file" in
+ *.a | *.lib)
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ library_names=
+ old_library=
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
+
+ dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+ test "X$dir" = "X$file/" && dir=
+ dir="$dir$objdir"
+
+ # See the names of the shared library.
+ set dummy $library_names
+ if test -n "$2"; then
+ realname="$2"
+ shift
+ shift
+
+ # Install the shared library and build the symlinks.
+ $show "$install_prog $dir/$realname $destdir/$realname"
+ $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+
+ if test $# -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ for linkname
+ do
+ if test "$linkname" != "$realname"; then
+ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ fi
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ eval cmds=\"$postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Install the pseudo-library for information purposes.
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ instname="$dir/$name"i
+ $show "$install_prog $instname $destdir/$name"
+ $run eval "$install_prog $instname $destdir/$name" || exit $?
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case "$destfile" in
+ *.lo)
+ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+ ;;
+ *.o | *.obj)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ if test -n "$destfile"; then
+ $show "$install_prog $file $destfile"
+ $run eval "$install_prog $file $destfile" || exit $?
+ fi
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+ exit 0
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
+ # Do a test to see if this is really a libtool program.
+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ link_against_libtool_libs=
+ relink_command=
+
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$link_against_libtool_libs"; then
+ $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+ exit 1
+ fi
+
+ finalize=yes
+ for lib in $link_against_libtool_libs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ # If there is no directory component, then add one.
+ case "$lib" in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+ fi
+ libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+ finalize=no
+ fi
+ done
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ if test "$finalize" = yes && test -z "$run"; then
+ tmpdir="/tmp"
+ test -n "$TMPDIR" && tmpdir="$TMPDIR"
+ tmpdir="$tmpdir/libtool-$$"
+ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+ else
+ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+ continue
+ fi
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ ${rm}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ $echo "$modename: warning: cannot relink \`$file'" 1>&2
+ fi
+ else
+ # Install the binary that we compiled earlier.
+ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ $show "$install_prog$stripme $file $destfile"
+ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+ test -n "$outputname" && ${rm}r "$tmpdir"
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
+
+ # Do each command in the postinstall commands.
+ eval cmds=\"$old_postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ done
+
+ if test -n "$future_libdirs"; then
+ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+ fi
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+ exec $SHELL $0 --finish$current_libdirs
+ exit 1
+ fi
+
+ exit 0
+ ;;
+
+ # libtool finish mode
+ finish)
+ modename="$modename: finish"
+ libdirs="$nonopt"
+ admincmds=
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ eval cmds=\"$finish_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
+ done
+ IFS="$save_ifs"
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $run eval "$cmds" || admincmds="$admincmds
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ test "$show" = : && exit 0
+
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ echo " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ echo " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ echo " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+ echo "See any operating system documentation about shared libraries for"
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ echo "----------------------------------------------------------------------"
+ exit 0
+ ;;
+
+ # libtool execute mode
+ execute)
+ modename="$modename: execute"
+
+ # The first argument is the command name.
+ cmd="$nonopt"
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+ exit 1
+ fi
+
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ if test ! -f "$file"; then
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ dir=
+ case "$file" in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+ exit 1
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+ ;;
+
+ *)
+ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case "$file" in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+ args="$args \"$file\""
+ done
+
+ if test -z "$run"; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved enviroment variables
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+ if test "${save_LANG+set}" = set; then
+ LANG="$save_LANG"; export LANG
+ fi
+
+ # Now actually exec the command.
+ eval "exec \$cmd$args"
+
+ $echo "$modename: cannot exec \$cmd$args"
+ exit 1
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+ $echo "export $shlibpath_var"
+ fi
+ $echo "$cmd$args"
+ exit 0
+ fi
+ ;;
+
+ # libtool uninstall mode
+ uninstall)
+ modename="$modename: uninstall"
+ rm="$nonopt"
+ files=
+
+ for arg
+ do
+ case "$arg" in
+ -*) rm="$rm $arg" ;;
+ *) files="$files $arg" ;;
+ esac
+ done
+
+ if test -z "$rm"; then
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ for file in $files; do
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+ rmfiles="$file"
+
+ case "$name" in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ . $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ rmfiles="$rmfiles $dir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ eval cmds=\"$postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ eval cmds=\"$old_postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
+
+ # FIXME: should reinstall the best remaining shared library.
+ fi
+ ;;
+
+ *.lo)
+ if test "$build_old_libs" = yes; then
+ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+ rmfiles="$rmfiles $dir/$oldobj"
+ fi
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+ ;;
+
+ *)
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+ ;;
+ esac
+ done
+ exit 0
+ ;;
+
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
+ exit 1
+ ;;
+ esac
+
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+ exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+-n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --finish same as \`--mode=finish'
+ --help display this help message and exit
+ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
+ --quiet same as \`--silent'
+ --silent don't print informational messages
+ --version print version information
+
+MODE must be one of the following:
+
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+ exit 0
+ ;;
+
+compile)
+ $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -static always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+execute)
+ $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+finish)
+ $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+install)
+ $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+link)
+ $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -static do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+uninstall)
+ $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+*)
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/expat/conftools/missing b/expat/conftools/missing
new file mode 100755
index 0000000..7789652
--- /dev/null
+++ b/expat/conftools/missing
@@ -0,0 +1,190 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing - GNU libit 0.0"
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+ aclocal)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acinclude.m4' or \`configure.in'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`configure.in'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acconfig.h' or \`configure.in'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequirements for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
diff --git a/expat/conftools/mkinstalldirs b/expat/conftools/mkinstalldirs
new file mode 100755
index 0000000..4f58503
--- /dev/null
+++ b/expat/conftools/mkinstalldirs
@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id: mkinstalldirs,v 1.13 1999/01/05 03:18:55 bje Exp $
+
+errstatus=0
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here
diff --git a/expat/demo/makedemo.bat b/expat/demo/makedemo.bat
deleted file mode 100755
index 4e909eb..0000000
--- a/expat/demo/makedemo.bat
+++ /dev/null
@@ -1,5 +0,0 @@
-@echo off
-set LIB=..\xmlparse\Release;..\xmltok\Release;..\lib;%LIB%
-set INCLUDE=..\xmlparse;..\xmltok;%INCLUDE%
-set CL=/nologo /DXMLTOKAPI=__declspec(dllimport) /DXMLPARSEAPI=__declspec(dllimport) xmlparse.lib xmltok.lib
-cl /Fe..\bin\demo demo.c
diff --git a/expat/doc/reference.html b/expat/doc/reference.html
new file mode 100644
index 0000000..9998c59
--- /dev/null
+++ b/expat/doc/reference.html
@@ -0,0 +1,1191 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
+ "http://www.w3.org/TR/REC-html40/loose.dtd">
+<html>
+<head>
+
+<!-- Copyright 1999,2000 Clark Cooper <coopercc@netheaven.com>
+ All rights reserved.
+ This is free software. You may distribute or modify according to
+ the terms of the MIT/X License -->
+ <title>Expat XML Parser</title>
+ <meta name="author" content="Clark Cooper, coopercc@netheaven.com">
+ <meta http-equiv="Content-Style-Type" content="text/css">
+ <link href="style.css" rel="stylesheet" type="text/css">
+</head>
+<body>
+<h1>Expat XML Parser</h1>
+
+<p>Expat is a library, written in C, for parsing XML documents. It's the
+underlying XML parser for the open source Mozilla project, perl's
+XML::Parser, and other open-source XML parsers.</p>
+
+<p>This library is the creation of James Clark, who's also given us
+groff (an nroff look-alike), Jade (an implemention of ISO's DSSSL stylesheet
+language for SGML), XP (a Java XML parser package), XT (a Java XSL engine).
+James was also the technical lead on the XML Working Group at W3 that produced
+the XML specification.</p>
+
+<p>This is free software, licensed under the
+<a href="../COPYING">MIT/X Consortium license</a>. You may download it from
+<a href="http://expat.sourceforge.net">the expat homepage on Source Forge</a>.
+</p>
+
+<p>The bulk of this document was originally commissioned as an article by
+<a href="http://www.xml.com/">XML.com</a>. They graciously allowed me to retain
+copyright and to distribute it with expat.
+
+<hr>
+<h2>Table of Contents</h2>
+<ul>
+ <li><a href="#overview">Overview</a></li>
+ <li><a href="#building">Building and Installing</a></li>
+ <li><a href="#using">Using expat</a></li>
+ <li><a href="#examples">Some examples</a></li>
+ <li><a href="#reference">Reference</a>
+ <ul>
+ <li><a href="#creation">Parser Creation Functions</a>
+ <ul>
+ <li><a href="#XML_ParserCreate">XML_ParserCreate</a></li>
+ <li><a href="#XML_ParserCreateNS">XML_ParserCreateNS</a></li>
+ <li><a href="#XML_ExternalEntityParserCreate">XML_ExternalEntityParserCreate</a><li>
+ <li><a href="#XML_ParserFree">XML_ParserFree</a></li>
+ </ul>
+ </li>
+ <li><a href="#parsing">Parsing Functions</a>
+ <ul>
+ <li><a href="#XML_Parse">XML_Parse</a></li>
+ <li><a href="#XML_ParseBuffer">XML_ParseBuffer</a></li>
+ <li><a href="#XML_GetBuffer">XML_GetBuffer</a></li>
+ </ul>
+ </li>
+ <li><a href="#setting">Handler Setting Functions</a>
+ <ul>
+ <li><a href="#XML_SetElementHandler">XML_SetElementHandler</a></li>
+ <li><a href="#XML_SetCharacterDataHandler">XML_SetCharacterDataHandler</a></li>
+ <li><a href="#XML_SetProcessingInstructionHandler">XML_SetProcessingInstructionHandler</a></li>
+ <li><a href="#XML_SetCommentHandler">XML_SetCommentHandler</a></li>
+ <li><a href="#XML_SetCdataSectionHandler">XML_SetCdataSectionHandler</a></li>
+ <li><a href="#XML_SetDefaultHandler">XML_SetDefaultHandler</a></li>
+ <li><a href="#XML_SetDefaultHandlerExpand">XML_SetDefaultHandlerExpand</a></li>
+ <li><a href="#XML_SetExternalEntityRefHandler">XML_SetExternalEntityRefHandler</a></li>
+ <li><a href="#XML_SetUnknownEncodingHandler">XML_SetUnknownEncodingHandler</a></li>
+ <li><a href="#XML_SetNamespaceDeclHandler">XML_SetNamespaceDeclHandler</a></li>
+ <li><a href="#XML_SetUnparsedEntityDeclHandler">XML_SetUnparsedEntityDeclHandler</a></li>
+ <li><a href="#XML_SetNotationDeclHandler">XML_SetNotationDeclHandler</a></li>
+ <li><a href="#XML_SetNotStandaloneHandler">XML_SetNotStandaloneHandler</a></li>
+ </ul>
+ </li>
+ <li><a href="#position">Parse Position and Error Reporting Functions</a>
+ <ul>
+ <li><a href="#XML_GetErrorCode">XML_GetErrorCode</a></li>
+ <li><a href="#XML_ErrorString">XML_ErrorString</a></li>
+ <li><a href="#XML_GetCurrentByteIndex">XML_GetCurrentByteIndex</a></li>
+ <li><a href="#XML_GetCurrentLineNumber">XML_GetCurrentLineNumber</a></li>
+ <li><a href="#XML_GetCurrentColumnNumber">XML_GetCurrentColumnNumber</a></li>
+ </ul>
+ </li>
+ <li><a href="#miscellaneous">Miscellaneous Functions</a>
+ <ul>
+ <li><a href="#XML_SetUserData">XML_SetUserData</a></li>
+ <li><a href="#XML_GetUserData">XML_GetUserData</a></li>
+ <li><a href="#XML_UseParserAsHandlerArg">XML_UseParserAsHandlerArg</a></li>
+ <li><a href="#XML_SetBase">XML_SetBase</a></li>
+ <li><a href="#XML_GetBase">XML_GetBase</a></li>
+ <li><a href="#XML_GetSpecifiedAttributeCount">XML_GetSpecifiedAttributeCount</a></li>
+ <li><a href="#XML_SetEncoding">XML_SetEncoding</a></li>
+ <li><a href="#XML_SetParamEntityParsing">XML_SetParamEntityParsing</a></li>
+ </ul>
+ </li>
+ </ul>
+ </li>
+</ul>
+
+<hr>
+<h2><a name="overview">Overview</a></h2>
+<p>Expat is a stream-oriented parser. You register callback (or handler)
+functions with
+the parser and then start feeding it the document.
+As the parser recognizes parts of
+the document, it will call the appropriate handler for that part (if you've
+registered one.) The document is fed to the parser in pieces, so you can
+start parsing before you have all the document. This also allows you to
+parse really huge documents that won't fit into memory.</p>
+
+<p>Expat can be intimidating due to the many kinds of handlers and options
+you can set. But you only need to learn four functions in order to do 90%
+of what you'll want to do with it:</p>
+
+<dl>
+
+<dt><code>XML_ParserCreate</code></dt>
+ <dd>Create a new parser object.</dd>
+
+<dt><code>XML_SetElementHandler</code></dt>
+ <dd>Set handlers for start and end tags.</dd>
+
+<dt><code>XML_SetCharacterDataHandler</code></dt>
+ <dd>Set handler for text.</dd>
+
+<dt><code>XML_Parse</code></dt>
+ <dd>Pass a buffer full of document to the parser</dd>
+</dl>
+
+<p>These functions and others are described in the
+<a href="#reference">reference</a> part of this document. The reference
+section also describes in detail the parameters passed to the different
+types of handlers.
+
+<p>Let's look at a very simple example program that only uses 3 of the above
+functions (it doesn't need to set a character handler.) The program
+<a href="../examples/outline.c">outline.c</a>
+prints an element outline, indenting child elements to distinguish them from
+the parent element that contains them. The start handler does all the work.
+It prints two indenting spaces for every level of ancestor elements, then
+it prints the element and attribute information. Finally it increments the
+global Depth variable.
+
+<div class="eg">
+<pre>
+int Depth;
+
+void
+start(void *data, const char *el, const char **attr) {
+ int i;
+
+ for (i = 0; i < Depth; i++)
+ printf(" ");
+
+ printf("%s", el);
+
+ for (i = 0; attr[i]; i += 2) {
+ printf(" %s='%s'", attr[i], attr[i + 1]);
+ }
+
+ printf("\n");
+ Depth++;
+} /* End of start handler */
+</pre>
+</div>
+
+<p>The end tag simply does the bookkeeping work of decrementing the Depth.
+<div class="eg">
+<pre>
+void
+end(void *data, const char *el) {
+ Depth--;
+} /* End of end handler */
+</pre>
+</div>
+
+<p>After creating the parser, the main program just has the job of
+shoveling the document to the parser so that it can do its work.
+
+<hr>
+<h2><a name="building">Building and Installing expat</a></h2>
+<p>The expat distribution comes as a compressed (with GNU gzip) tar file.
+After unpacking this, cd into the directory and run the configure shell
+script.
+</p>
+<p>If you're happy with all the defaults that configure picks for you,
+and you have permission on your system to install into /usr/local, you can
+install expat with this sequence of commands:</p>
+
+<pre>
+ ./configure
+ make
+ make install
+</pre>
+
+<p>There are some options that you can provide to this script, but the
+only one we'll mention here is the <code>--prefix</code> option. You can
+find out all the options available by running configure with just the
+<code>--help</code> option.
+</p>
+
+By default, the configure script sets things up so that the library gets
+installed in <code>/usr/local/lib</code> and the associated header file in
+<code>/usr/local/include</code>.
+But if you were to give the option, <code>--prefix=/home/me/mystuff</code>,
+then the library and header would get installed in
+<code>/home/me/mystuff/lib</code> and <code>/home/me/mystuff/include</code>
+respectively.
+</p>
+
+<hr>
+<h2><a name="using">Using Expat</a></h2>
+<h3>Compiling and Linking against expat</h3>
+<p>Unless you installed expat in a location not expected by your compiler
+and linker, all you have to do to use expat in your programs is to include
+the expat header in your files that make calls to it and to tell the linker
+that it needs to link against the expat library. On Unix systems, this would
+be the <code>-lexpat</code> argument.
+Otherwise, you'll need to tell the compiler where to look for the expat header
+and the linker where to find the expat library. You may also need to take
+steps to tell the operating system where to find this libary at run time.
+</p>
+<p>On a Unix based system, here's what a Makefile might look like when expat
+is installed in a standard location:</p>
+
+<div class="eg">
+<pre>
+CC=cc
+LDFLAGS=
+LIBS= -lexpat
+xmlapp: xmlapp.o
+ $(CC) $(LDFLAGS) -o xmlapp xmlapp.o $(LIBS)
+</pre>
+</div>
+
+<p>If you installed expat in, say, <code>/home/me/mystuff</code>, then
+the Makefile would look like this:</p>
+
+<div class="eg">
+<pre>
+CC=cc
+CFLAGS= -I/home/me/mystuff/include
+LDFLAGS=
+LIBS= -L/home/me/mystuff/lib -lexpat
+xmlapp: xmlapp.o
+ $(CC) $(LDFLAGS) -o xmlapp xmlapp.o $(LIBS)
+</pre>
+</div>
+
+<p>You'd also have to set the environment variable <code>LD_LIBRARY_PATH</code>
+to <code>/home/me/mystuff/lib</code> (or to
+<code>${LD_LIBRARY_PATH}:/home/me/mystuff/lib</code> if LD_LIBRARY_PATH
+already has some directories in it) in order to run your application.
+</p>
+
+<h3>Expat Basics</h3>
+<p>As we saw in the example in the overview, the first step in parsing an
+XML document with expat is to create a parser object. There are
+<a href="#creation">three functions</a> in the expat API for creating a
+parser object.
+However, only two of these
+(<a href="#XML_ParserCreate"><code>XML_ParserCreate</code></a> and
+<a href="#XML_ParserCreateNS"><code>XML_ParserCreateNS</code></a>)
+can be used for constructing a parser for a top-level document.
+The object returned by these functions is an opaque pointer
+(i.e. expat.h declares it as void *) to data with further internal structure.
+In order to free the memory associated with this object you must call
+<a href="#XML_ParserFree"><code>XML_ParserFree</code></a>. Note that if
+you have provided any <a href="userdata">user data</a> that gets stored
+in the parser, then your application is responsible for freeing it prior to
+calling XML_ParserFree.
+</p>
+
+<p>The objects returned by the parser creation functions are good for
+parsing only one XML document or external parsed entity. If your application
+needs to parse many XML documents, then it needs to create a parser object
+for each one. The best way to deal with this is to create a higher level
+object that contains all the default initialization you want for your parser
+objects.
+
+<p>Walking through a document hierarchy with a stream oriented parser will
+require a good stack mechanism in order to keep track of current context.
+For instance, to answer the simple question,
+"What element does this text belong to?" requires a stack, since the
+parser may have descended into other elements that are children of the
+current one and has encountered this text on the way out.
+
+<p>The things you're likely to want to keep on a stack are the currently
+opened element and it's attributes. You push this information onto the
+stack in the start handler and you pop it off in the end handler.
+
+<p>For some tasks, it is sufficient to just keep information on what the
+depth of the stack is (or would be if you had one.) The outline program shown
+above presents one example. Another such task would be skipping over a
+complete element. When you see the start tag for the element you want to
+skip, you set a skip flag and record the depth at which the element started.
+When the end tag handler encounters the same depth, the skipped element has
+ended and the flag may be cleared. If you follow the convention that the
+root element starts at 1, then you can use the same variable for skip flag
+and skip depth.
+
+<div class="eg">
+<pre>
+void
+init_info(Parseinfo *info) {
+ info->skip = 0;
+ info->depth = 1;
+ /* Other initializations here */
+} /* End of init_info */
+
+void
+rawstart(void *data, const char *el, const char **attr) {
+ Parseinfo *inf = (Parseinfo *) data;
+
+ if (! inf->skip) {
+ if (should_skip(inf, el, attr)) {
+ inf->skip = inf->depth;
+ }
+ else
+ start(inf, el, attr); /* This does rest of start handling */
+ }
+
+ inf->depth++;
+} /* End of rawstart */
+
+void
+rawend(void *data, const char *el) {
+ Parseinfo *inf = (Parseinfo *) data;
+
+ inf->depth--;
+
+ if (! inf->skip)
+ end(inf, el); /* This does rest of end handling */
+
+ if (inf->skip == inf->depth)
+ inf->skip = 0;
+} /* End rawend */
+
+</pre>
+</div>
+
+<p>Notice in the above example the difference in how depth is manipulated
+in the start and end handlers. The end tag handler should be the mirror
+image of the start tag handler. This is necessary to properly model
+containment. Since, in the start tag handler, we
+incremented depth <em>after</em> the main body of start tag code, then in
+the end handler, we need to manipulate it <em>before</em> the main body.
+If we'd decided to increment it first thing in the start handler, then
+we'd have had to decrement it last thing in the end handler.
+
+<h3>Communicating between handlers</h3>
+
+<p>In order to be able to pass information between different handlers
+without using globals, you'll need to define a data structure to hold
+the shared variables. You can then tell expat (with the XML_SetUserData
+function) to pass a pointer to this
+structure to the handlers. This is typically the first argument received
+by most handlers.
+
+<h3>Namespace Processing</h3>
+
+<p>When the parser is created using the <code>XML_ParserCreateNS</code>,
+function, expat performs namespace processing. Under namespace processing,
+expat consumes <code>xmlns</code> and <code>xmlns:...</code> attributes,
+which declare namespaces for the scope of the element in which they
+occur. This means that your start handler will not see these attributes.
+Your application can still be informed of these declarations by setting
+namespace declaration handlers with
+<a href="#XML_SetNamespaceDeclHandler">
+<code>XML_SetNamespaceDeclHandler</code></a>.
+
+<p>Element type and attribute names that belong to a given namespace are
+passed to the appropriate handler in expanded form. This expanded form
+is a concatenation of the namespace URI, the separator character (which
+is the 2nd argument to <code>XML_ParserCreateNS</code>), and the local
+name (i.e. the part after the colon). Names with undeclared prefixes are
+passed through to the handlers unchanged, with the prefix and colon still
+attached. Unprefixed attribute names are never expanded, and unprefixed
+element names are only expanded when they are in the scope of a default
+namespace.
+
+<p>You can set handlers for the start of a namespace declaration and for
+the end of a scope of a declaration with the
+<code>XML_SetNamespaceDeclHandler</code> function.
+The StartNamespaceDeclHandler is called prior to the start tag handler
+and the EndNamespaceDeclHandler is called before the corresponding end tag
+that ends the namespace's scope.
+The namespace start handler gets passed the prefix and URI for the namespace.
+For a default namespace declaration (xmlns='...'), the prefix will be null.
+The URI will be null for the case where the default namespace is being unset.
+The namespace end handler just gets the prefix for the closing scope.
+
+<p>These handlers are called for each declaration. So if, for instance, a
+start tag had three namespace declarations, then the StartNamespaceDeclHandler
+would be called three times before the start tag handler is called, once for
+each declaration.
+
+<p>The <a href="src/namespace.c">namespace.c</a> example demonstrates the
+use of these features. Like outline.c, it produces an outline, but
+in addition it annotates when a namespace scope starts and when it ends.
+This example also demonstrates use of application user data.
+
+<h3>Character Encodings</h3>
+
+<p>While XML is based on Unicode, and every XML processor is required to
+recognized UTF-8 and UTF-16 (1 and 2 byte encodings of Unicode), other
+encodings may be declared in XML documents or entities. For the main
+document, an XML declaration may contain an encoding declaration:
+<pre>
+<?xml version="1.0" encoding="ISO-8859-2"?>
+</pre>
+
+<p>External parsed entities may begin with a text declaration, which
+looks like an XML declaration with just an encoding declaration:
+<pre>
+<?xml encoding="Big5"?>
+</pre>
+
+<p>With expat, you may also specify an encoding at the time of creating a
+parser. This is useful when the encoding information may come from a source
+outside the document itself (like a higher level protocol.)
+
+<p><a name="builtin_encodings"></a>There are four built-in encodings in expat:
+<ul>
+<li>UTF-8
+<li>UTF-16
+<li>ISO-8859-1
+<li>US-ASCII
+</ul>
+
+<p>Anything else discovered in an encoding declaration or in the
+protocol encoding specified in the parser constructor, triggers a call
+to the <code>UnknownEncodingHandler</code>. This handler gets passed
+the encoding name and a pointer to an <code>XML_Encoding</code> data
+structure. Your handler must fill in this structure and return 1 if
+it knows how to deal with the encoding. Otherwise the handler should
+return 0.
+The handler also gets passed a pointer to an
+optional application data structure that you may indicate when you set
+the handler.
+
+<p>Expat places restrictions on character encodings that it can support
+by filling in the <code>XML_Encoding</code> structure.
+include file:
+<ol>
+<li>Every ASCII character that can appear in a well-formed XML document
+must be represented by a single byte, and that byte must correspond to
+it's ASCII encoding (except for the characters $@\^'{}~)</li>
+<li>Characters must be encoded in 4 bytes or less.</li>
+<li>All characters encoded must have Unicode scalar values less than or
+equal to 65535 (0xFFFF)<em>This does not apply to the built-in support
+for UTF-16 and UTF-8</em></li>
+<li>No character may be encoded by more that one distinct sequence of
+bytes</li>
+</ol>
+
+<p><code>XML_Encoding</code> contains an array of integers that correspond
+to the 1st byte of an encoding sequence. If the value in the array for a
+byte is zero or positive, then the byte is a single byte encoding that
+encodes the Unicode scalar value contained in the array. A -1 in this array
+indicates a malformed byte. If the value is
+-2, -3, or -4, then the byte is the beginning of a 2, 3, or 4 byte sequence
+respectively. Multi-byte sequences are sent to the convert function pointed
+at in the <code>XML_Encoding</code> structure. This function should return
+the Unicode scalar value for the sequence or -1 if the sequence is malformed.
+
+<p>One pitfall that novice expat users are likely to fall into is that
+although expat may accept input in various encodings, the strings that it
+passes to the handlers are always encoded in UTF-8. Your application is
+responsible for any translation of these strings into other encodings.
+
+<h3>Handling External Entity References</h3>
+
+<p>Expat does not read or parse external entities directly. Note that any
+external DTD is a special case of an external entity.
+If you've set no <code>ExternalEntityRefHandler</code>, then external
+entity references are silently ignored. Otherwise, it calls your handler with
+the information needed to read and parse the external entity.
+
+<p>Your handler
+isn't actually responsible for parsing the entity, but it is responsible
+for creating a subsidiary parser with
+<code>XML_ExternalEntityParserCreate</code> that will do the job. This returns
+an instance of <code>XML_Parser</code> that has handlers and other data
+structures initialized from the parent parser. You may then use
+<code>XML_Parse</code> or <code>XML_ParseBuffer</code> calls against this
+parser.
+Since external entities my refer to other external entities, your handler
+should be prepared to be called recursively.
+
+<h3>Parsing DTDs</h3>
+<p>In order to parse parameter entities, before starting the parse, you must
+call <code>XML_SetParamEntityParsing</code> with one of the following
+arguments:
+<dl>
+<dt><code>XML_PARAM_ENTITY_PARSING_NEVER</code></dt>
+<dd>Don't parse parameter entities or the external subset</dd>
+<dt><code>XML_PARAM_ENTITY_PARSING_UNLESS_STANDALONE</code></dt>
+<dd>Parse parameter entites and the external subset unless
+<code>standalone</code> was set to "yes" in the XML declaration.</dd>
+<dt><code>XML_PARAM_ENTITY_PARSING_ALWAYS</code></dt>
+<dd>Always parse parameter entities and the external subset</dd>
+</dl>
+
+<p>In order to read an external DTD, you also have to set an
+external entity reference handler as described above.
+
+<hr>
+<h2><a name="examples">Some expat Examples</a></h2>
+
+<hr>
+<!-- ================================================================ -->
+
+<h2><a name="reference">Expat Reference</a></h2>
+
+<h3><a name="creation">Parser Creation</a></h3>
+
+<div class="fcndec"><a name="XML_ParserCreate"><pre>
+XML_Parser
+XML_ParserCreate(const XML_Char *encoding)
+</pre></a></div>
+<div class="fcndef">
+Construct a new parser. If encoding is non-null, it specifies a
+character encoding to use for the document. This overrides the document
+encoding declaration. There are four built-in encodings:
+<ul>
+<li>US-ASCII
+<li>UTF-8
+<li>UTF-16
+<li>ISO-8859-1
+</ul>
+Any other value will invoke a call to the UnknownEncodingHandler.
+</div>
+
+<div class="fcndec"><a name="XML_ParserCreateNS"><pre>
+XML_Parser
+XML_ParserCreateNS(const XML_Char *encoding,
+ XML_Char sep)
+</pre></a></div>
+<div class="fcndef">
+Constructs a new parser that has namespace processing in effect. Namespace
+expanded element names and attribute names are returned as a concatenation
+of the namespace URI, <em>sep</em>, and the local part of the name. This
+means that you should pick a character for <em>sep</em> that can't be
+part of a legal URI.</div>
+
+<div class="fcndec"><a name="XML_ExternalEntityParserCreate"><pre>
+XML_Parser
+XML_ExternalEntityParserCreate(XML_Parser p,
+ const XML_Char *context,
+ const XML_Char *encoding)
+</pre></a></div>
+<div class="fcndef">
+Construct a new XML_Parser object for parsing an external general
+entity. Context is the context argument passed in a call to a
+ExternalEntityRefHandler. Other state information such as handlers, user data,
+namespace processing is inherited from the parser passed as the 1st
+argument. So you shouldn't need to call any of the behavior changing
+functions on this parser (unless you want it to act differently than the
+parent parser.)
+</div>
+
+<div class="fcndec"><a name="XML_ParserFree"><pre>
+void
+XML_ParserFree(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+Free memory used by the parser. Your application is responsible for
+freeing any memory associated with <a href="#userdata">UserData</a>.
+</div>
+
+<h3><a name="parsing">Parsing</a></h3>
+
+
+<div class="fcndec"><a name="XML_Parse"><pre>
+int
+XML_Parse(XML_Parser p,
+ const char *s,
+ int len,
+ int isFinal)
+</pre></a></div>
+<div class="fcndef">
+Parse some more of the document. The string <code>s</code> is a buffer
+containing part (or perhaps all) of the document. The number of bytes of s
+that are part of the document is indicated by <code>len</code>. This means
+that <code>s</code> doesn't have to be null terminated. It also means that
+if <code>len</code> is larger than the number of bytes in the block of
+memory that <code>s</code> points at, then a memory fault is likely. The
+<code>isFinal</code> parameter informs the parser that this is the last
+piece of the document. Frequently, the last piece is empty (i.e.
+<code>len</code> is zero.)
+If a parse error occurred, it returns 0. Otherwise it returns a non-zero
+value.
+</div>
+
+<div class="fcndec"><a name="XML_ParseBuffer"><pre>
+int
+XML_ParseBuffer(XML_Parser p,
+ int len,
+ int isFinal)
+</pre></a></div>
+<div class="fcndef">
+This is just like XML_Parse, except in this case expat provides the buffer.
+By obtaining the buffer from expat with the <code>XML_GetBuffer</code>
+function, the application can avoid double copying of the input.
+</div>
+
+<div class="fcndec"><a name="XML_GetBuffer"><pre>
+void *
+XML_GetBuffer(XML_Parser p,
+ int len)
+</pre></a></div>
+<div class="fcndef">
+Obtain a buffer of size <code>len</code> to read a piece of the document
+into. A NULL value is returned if expat can't allocate enough memory for
+this buffer. This has to be called prior to every call to
+<code>XML_ParseBuffer</code>. A typical use would look like this:
+
+<div id="eg">
+<pre>
+for (;;) {
+ int bytes_read;
+ void *buff = XML_GetBuffer(p, BUFF_SIZE);
+ if (buff == NULL) {
+ /* handle error */
+ }
+
+ bytes_read = read(docfd, buff, BUFF_SIZE);
+ if (bytes_read < 0) {
+ /* handle error */
+ }
+
+ if (! XML_ParseBuffer(p, bytes_read, bytes_read == 0)) {
+ /* handle parse error */
+ }
+
+ if (bytes_read == 0)
+ break;
+}
+</pre>
+</div>
+</div>
+
+<h3><a name="setting">Handler Setting</a></h3>
+<p>Although handlers are typically set prior to parsing and left alone, an
+application may choose to set or change the handler for a parsing event
+while the parse is in progress. For instance, your application may choose
+to ignore all text not descended from a <code>para</code> element. One
+way it could do this is to set the character handler when a para start tag
+is seen, and unset it for the corresponding end tag.
+
+<p>A handler may be <em>unset</em> by providing a NULL pointer to the
+appropriate handler setter. None of the handler setting functions have
+a return value.
+
+<p>Your handlers will be receiving strings in arrays of type
+<code>XML_Char</code>. This type is defined in expat.h as <code>char *</code>
+and contains bytes encoding UTF-8.
+Note that you'll receive them in this form independent of the original
+encoding of the document.
+
+<div class="handler">
+<div class="setter"><a name="XML_SetElementHandler"><pre>
+XML_SetElementHandler(XML_Parser p,
+ XML_StartElementHandler start,
+ XML_EndElementHandler end);
+</pre></a></div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_StartElementHandler)(void *userData,
+ const XML_Char *name,
+ const XML_Char **atts);
+</pre>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_EndElementHandler)(void *userData,
+ const XML_Char *name);
+</pre>
+</div>
+<p>Set handlers for start and end tags. Attributes are passed to the start
+handler as a pointer to a vector of char pointers. Each attribute seen in
+a start (or empty) tag occupies 2 consecutive places in this vector: the
+attribute name followed by the attribute value. These pairs are terminated
+by a null pointer.
+</div>
+
+<div class="handler">
+<div class="setter"><a name="XML_SetCharacterDataHandler"><pre>
+XML_SetCharacterDataHandler(XML_Parser p,
+ XML_CharacterDataHandler charhndl)
+</pre></a></div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_CharacterDataHandler)(void *userData,
+ const XML_Char *s,
+ int len);
+</pre>
+</div>
+<p>Set a text handler. The string your handler receives
+is <em>NOT zero terminated</em>. You have to use the length argument
+to deal with the end of the string. A single block of contiguous text
+free of markup may still result in a sequence of calls to this handler.
+In other words, if you're searching for a pattern in the text, it may
+be split across calls to this handler.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetProcessingInstructionHandler">
+<pre>
+XML_SetProcessingInstructionHandler(XML_Parser p,
+ XML_ProcessingInstructionHandler proc)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_ProcessingInstructionHandler)(void *userData,
+ const XML_Char *target,
+ const XML_Char *data);
+
+</pre>
+</div>
+<p>Set a handler for processing instructions. The target is the first word
+in the processing instruction. The data is the rest of the characters in
+it after skipping all whitespace after the initial word.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetCommentHandler">
+<pre>
+XML_SetCommentHandler(XML_Parser p,
+ XML_CommentHandler cmnt)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_CommentHandler)(void *userData,
+ const XML_Char *data);
+</pre>
+</div>
+<p>Set a handler for comments. The data is all text inside the comment
+delimiters.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetCdataSectionHandler">
+<pre>
+XML_SetCdataSectionHandler(XML_Parser p,
+ XML_StartCdataSectionHandler start,
+ XML_EndCdataSectionHandler end)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_StartCdataSectionHandler)(void *userData);
+</pre>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_EndCdataSectionHandler)(void *userData);
+</pre>
+</div>
+<p>Sets handlers that get called at the beginning and end of a
+CDATA section.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetDefaultHandler">
+<pre>
+XML_SetDefaultHandler(XML_Parser p,
+ XML_DefaultHandler hndl)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_DefaultHandler)(void *userData,
+ const XML_Char *s,
+ int len);
+</pre>
+</div>
+<p>Sets a handler for any characters in the document which wouldn't
+otherwise be handled. This includes both data for which no handlers can be
+set (like some kinds of DTD declarations) and data which could be reported
+but which currently has no handler set. Note that a contiguous piece of
+data that is destined to be reported to the default handler may actually
+be reported over several calls to the handler. Setting the handler with
+this call has the side effect of turning off expansion of references
+to internally defined general entities. Instead these references are
+passed to the default handler.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetDefaultHandlerExpand">
+<pre>
+XML_SetDefaultHandlerExpand(XML_Parser p,
+ XML_DefaultHandler hndl)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_DefaultHandler)(void *userData,
+ const XML_Char *s,
+ int len);
+</pre>
+</div>
+<p>This sets a default handler, but doesn't affect expansion of internal
+entity references.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetExternalEntityRefHandler">
+<pre>
+XML_SetExternalEntityRefHandler(XML_Parser p,
+ XML_ExternalEntityRefHandler hndl)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef int
+(*XML_ExternalEntityRefHandler)(XML_Parser parser,
+ const XML_Char *context,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId);
+</pre>
+</div>
+<p>Set an external entity reference handler. This handler is also
+called for processing an external DTD subset if parameter entity parsing
+is in effect. (See <a href="#XML_SetParamEntityParsing">
+<code>XML_SetParamEntityParsing</code></a>.)
+
+
+<p>The base parameter is the base to use for relative system identifiers.
+It is set by <a href="#XML_SetBase">XML_SetBase</a> and may be null. The
+public id parameter is the public id given in the entity declaration and
+may be null. The system id is the system identifier specified in the entity
+declaration and is never null.
+
+<p>There are a couple of ways in which this handler differs from others.
+First, this handler returns an integer. A non-zero value should be returned
+for successful handling of the external entity reference. Returning a zero
+indicates failure, and causes the calling parser to return
+an XML_ERROR_EXTERNAL_ENTITY_HANDLING error.
+
+<p>Second, instead of having userData as its first argument, it receives the
+parser that encountered the entity reference. This, along with the context
+parameter, may be used as arguments to a call to
+<a href="#XML_ExternalEntityParserCreate">XML_ExternalEntityParserCreate</a>. Using the
+returned parser, the body of the external entity can be recursively
+parsed.
+
+<p>Since this handler may be called recursively, it should not be saving
+information into global or static variables.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetUnknownEncodingHandler">
+<pre>
+XML_SetUnknownEncodingHandler(XML_Parser p,
+ XML_UnknownEncodingHandler enchandler,
+ void *encodingHandlerData)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef int
+(*XML_UnknownEncodingHandler)(void *encodingHandlerData,
+ const XML_Char *name,
+ XML_Encoding *info);
+</pre>
+</div>
+<p>Set a handler to deal with encodings other than the
+<a href="#builtin_encodings">built in set</a>. If the handler knows how
+to deal with an encoding with the given name, it should fill in the info
+data structure and return 1. Otherwise it should return 0.
+
+<pre>
+ typedef struct {
+ int map[256];
+ void *data;
+ int (*convert)(void *data, const char *s);
+ void (*release)(void *data);
+ } XML_Encoding;
+</pre>
+
+<p>The map array contains information for every possible possible leading
+byte in a byte sequence. If the corresponding value is >= 0, then it's
+a single byte sequence and the byte encodes that Unicode value. If the
+value is -1, then that byte is invalid as the initial byte in a sequence.
+If the value is -n, where n is an integer > 1, then n is the number of
+bytes in the sequence and the actual conversion is accomplished by a
+call to the function pointed at by convert. This function may return -1
+if the sequence itself is invalid. The convert pointer may be null if
+there are only single byte codes. The data parameter passed to the convert
+function is the data pointer from XML_Encoding. The string s is <em>NOT</em>
+null terminated and points at the sequence of bytes to be converted.
+
+<p>The function pointed at by release is called by the parser when it is
+finished with the encoding. It may be null.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetNamespaceDeclHandler">
+<pre>
+XML_SetNamespaceDeclHandler(XML_Parser p,
+ XML_StartNamespaceDeclHandler start,
+ XML_EndNamespaceDeclHandler end)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_StartNamespaceDeclHandler)(void *userData,
+ const XML_Char *prefix,
+ const XML_Char *uri);
+</pre>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_EndNamespaceDeclHandler)(void *userData,
+ const XML_Char *prefix);
+</pre>
+</div>
+<p>Set handlers for namespace declarations. Namespace declarations occur
+inside start tags. But the namespace declaration start handler is called before
+the start tag handler for each namespace declared in that start tag. The
+corresponding namespace end handler is called after the end tag for the
+element the namespace is associated with.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetUnparsedEntityDeclHandler">
+<pre>
+XML_SetUnparsedEntityDeclHandler(XML_Parser p,
+ XML_UnparsedEntityDeclHandler h)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_UnparsedEntityDeclHandler)(void *userData,
+ const XML_Char *entityName,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId,
+ const XML_Char *notationName);
+</pre>
+</div>
+<p>Set a handler that receives declarations of unparsed entities. These
+are entity declarations that have a notation (NDATA) field:
+<div id="eg">
+<pre>
+<!ENTITY logo SYSTEM "images/logo.gif" NDATA gif>
+</pre>
+</div>
+
+<p>So for this example, the entityName would be "logo", the systemId
+would be "images/logo.gif" and notationName would be "gif". For this
+example the publicId parameter is null. The base parameter would be
+whatever has been set with <code><a href="#XML_SetBase">XML_SetBase</a></code>.
+If not set, it would be null.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetNotationDeclHandler">
+<pre>
+XML_SetNotationDeclHandler(XML_Parser p,
+ XML_NotationDeclHandler h)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef void
+(*XML_NotationDeclHandler)(void *userData,
+ const XML_Char *notationName,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId);
+</pre>
+</div>
+<p>Set a handler that receives notation declarations.
+</div>
+
+<div class="handler">
+<div class="setter">
+<a name="XML_SetNotStandaloneHandler">
+<pre>
+XML_SetNotStandaloneHandler(XML_Parser p,
+ XML_NotStandaloneHandler h)
+</pre>
+</a>
+</div>
+<div class="signature">
+<pre>
+typedef int
+(*XML_NotStandaloneHandler)(void *userData);
+</pre>
+</div>
+<p>Set a handler that is called if the document is not "standalone".
+This happens when there is an external subset or a reference to a parameter
+entity, but does not have standalone set to "yes" in an XML declaration.
+If this handler returns 0, then the parser will throw an
+XML_ERROR_NOT_STANDALONE error.
+</div>
+
+<h3><a name="position">Parse position and error reporting functions</a></h3>
+<p>These are the functions you'll want to call when the parse functions
+return 0, although the position reporting functions are useful outside
+of errors. The position reported is the byte position (in the original
+document or entity encoding) of the first of the sequence
+of characters that generated the current event (or the error that caused
+the parse functions to return 0.)
+
+<div class="fcndec"><a name="XML_GetErrorCode"><pre>
+enum XML_Error
+XML_GetErrorCode(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+Return what type of error has occurred.
+</div>
+
+<div class="fcndec"><a name="XML_ErrorString"><pre>
+const XML_LChar *
+XML_ErrorString(int code)
+</pre></a></div>
+<div class="fcndef">
+Return a string describing the error corresponding to code.
+The code should be one of the enums that can be returned from
+XML_GetErrorCode.
+</div>
+
+<div class="fcndec"><a name="XML_GetCurrentByteIndex"><pre>
+long
+XML_GetCurrentByteIndex(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+Return the byte offset of the position.
+</div>
+
+<div class="fcndec"><a name="XML_GetCurrentLineNumber"><pre>
+int
+XML_GetCurrentLineNumber(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+Return the line number of the position.
+</div>
+
+<div class="fcndec"><a name="XML_GetCurrentColumnNumber"><pre>
+int
+XML_GetCurrentColumnNumber(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+Return the offset, from the beginning of the current line, of
+the position.
+</div>
+
+<h3><a name="miscellaneous">Miscellaneous functions</a></h3>
+<p>The functions in this section either obtain state information from the
+parser or can be used to dynamicly set parser options.
+
+<div class="fcndec"><a name="XML_SetUserData"><pre>
+void
+XML_SetUserData(XML_Parser p,
+ void *userData)
+</pre></a></div>
+<div class="fcndef">
+This sets the user data pointer that gets passed to handlers.
+It overwrites any previous value for this pointer. Note that the
+application is responsible for freeing the memory associated with
+<code>userData</code> when it is finished with the parser. So if
+you call this when there's already a pointer there, and you haven't
+freed the memory associated with it, then you've probably just leaked
+memory.
+</div>
+
+<div class="fcndec"><a name="XML_GetUserData"><pre>
+void *
+XML_GetUserData(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+This returns the user data pointer that gets passed to handlers.
+It is actually implemented as a macro.
+</div>
+
+<div class="fcndec"><a name="XML_UseParserAsHandlerArg"><pre>
+void
+XML_UseParserAsHandlerArg(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+After this is called, handlers receive the parser in the
+userData argument. The userData information can still be obtained using
+the XML_GetUserData function.
+</div>
+
+<div class="fcndec"><a name="XML_SetBase"><pre>
+int
+XML_SetBase(XML_Parser p,
+ const XML_Char *base)
+</pre></a></div>
+<div class="fcndef">
+Set the base to be used for resolving relative URIs in system identifiers.
+The return value is 0 if there's no memory to store base, otherwise it's
+non-zero.
+</div>
+
+<div class="fcndec"><a name="XML_GetBase"><pre>
+const XML_Char *
+XML_GetBase(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+Return the base for resolving relative URIs.
+</div>
+
+<div class="fcndec"><a name="XML_GetSpecifiedAttributeCount"><pre>
+int
+XML_GetSpecifiedAttributeCount(XML_Parser p)
+</pre></a></div>
+<div class="fcndef">
+When attributes are reported to the start handler in the atts vector,
+attributes that were explicitly set in the element occur before any
+attributes that receive their value from default information in an
+ATTLIST declaration. This function returns the number of attributes that
+were explicitly set, thus giving the offset of the first attribute set
+due to defaults. It supplies information for the last call to a start
+handler. If you're in a start handler, then that means the current call.
+</div>
+
+<div class="fcndec"><a name="XML_SetEncoding"><pre>
+int
+XML_SetEncoding(XML_Parser p,
+ const XML_Char *encoding)
+</pre></a></div>
+<div class="fcndef">
+Set the encoding to be used by the parser. It is equivalent to
+passing a non-null encoding argument to the parser creation functions.
+It must not be called after XML_Parser or XML_ParseBuffer have been
+called on the given parser.
+</div>
+
+<div class="fcndec"><a name="XML_SetParamEntityParsing"><pre>
+int
+XML_SetParamEntityParsing(XML_Parser p,
+ enum XML_ParamEntityParsing code)
+</pre></a></div>
+<div class="fcndef">
+This enables parsing of parameter entities, including the external
+parameter entity that is the external DTD subset, according to
+<code>code</code>.
+The choices for <code>code</code> are:
+<ul>
+<li>XML_PARAM_ENTITY_PARSING_NEVER
+<li>XML_PARAM_ENTITY_PARSING_UNLESS_STANDALONE
+<li>XML_PARAM_ENTITY_PARSING_ALWAYS
+</ul>
+</div>
+
+</body>
+</html>
diff --git a/expat/doc/style.css b/expat/doc/style.css
new file mode 100644
index 0000000..1a823ce
--- /dev/null
+++ b/expat/doc/style.css
@@ -0,0 +1,47 @@
+body {
+background-color: white
+}
+
+.eg {
+ padding-left: 1em;
+ padding-top: .5em;
+ border: solid thin;
+ margin: 1em 0;
+ background-color: tan;
+ margin-left: 5%;
+ margin-right: 10%;
+}
+
+.handler {
+ width: 100%;
+ border-top-width: thin;
+ margin-left: 5%;
+ margin-bottom: 1em;
+}
+
+.handler p {
+ margin-left: 3%;
+}
+
+.setter {
+ font-weight: bold;
+}
+
+.signature {
+ color: navy;
+}
+
+.fcndec {
+ width: 100%;
+ border-top-width: thin;
+ font-weight: bold;
+}
+
+.fcndef {
+ margin-left: 5%;
+ margin-bottom: 2em;
+}
+
+dd {
+margin-bottom: 2em;
+}@
diff --git a/expat/examples/Makefile.in b/expat/examples/Makefile.in
new file mode 100644
index 0000000..2d184a1
--- /dev/null
+++ b/expat/examples/Makefile.in
@@ -0,0 +1,29 @@
+################################################################
+# Process this file with top-level configure script to produce Makefile
+#
+# Copyright 2000 Clark Cooper
+#
+# This file is part of EXPAT.
+#
+# EXPAT is free software; you can redistribute it and/or modify it
+# under the terms of the License (based on the MIT/X license) contained
+# in the file COPYING that comes with this distribution.
+#
+# EXPAT IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+# SOFTWARE OR THE USE OR OTHER DEALINGS IN EXPAT.
+#
+
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = -lexpat
+CFLAGS = @CFLAGS@
+
+all: outline
+
+outline: outline.o
+ $(CC) -o outline outline.o $(LDFLAGS) $(LIBS)@
diff --git a/expat/examples/outline.c b/expat/examples/outline.c
new file mode 100644
index 0000000..22ab278
--- /dev/null
+++ b/expat/examples/outline.c
@@ -0,0 +1,86 @@
+/*****************************************************************
+ * outline.c
+ *
+ * Copyright 1999, Clark Cooper
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the license contained in the
+ * COPYING file that comes with the expat distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Read an XML document from standard input and print an element
+ * outline on standard output.
+ */
+
+
+#include <stdio.h>
+#include <expat.h>
+
+#define BUFFSIZE 8192
+
+char Buff[BUFFSIZE];
+
+int Depth;
+
+void
+start(void *data, const char *el, const char **attr) {
+ int i;
+
+ for (i = 0; i < Depth; i++)
+ printf(" ");
+
+ printf("%s", el);
+
+ for (i = 0; attr[i]; i += 2) {
+ printf(" %s='%s'", attr[i], attr[i + 1]);
+ }
+
+ printf("\n");
+ Depth++;
+} /* End of start handler */
+
+void
+end(void *data, const char *el) {
+ Depth--;
+} /* End of end handler */
+
+main(int argc, char **argv) {
+ XML_Parser p = XML_ParserCreate(NULL);
+ if (! p) {
+ fprintf(stderr, "Couldn't allocate memory for parser\n");
+ exit(-1);
+ }
+
+ XML_SetElementHandler(p, start, end);
+
+ for (;;) {
+ int done;
+ int len;
+
+ len = fread(Buff, 1, BUFFSIZE, stdin);
+ if (ferror(stdin)) {
+ fprintf(stderr, "Read error\n");
+ exit(-1);
+ }
+ done = feof(stdin);
+
+ if (! XML_Parse(p, Buff, len, done)) {
+ fprintf(stderr, "Parse error at line %d:\n%s\n",
+ XML_GetCurrentLineNumber(p),
+ XML_ErrorString(XML_GetErrorCode(p)));
+ exit(-1);
+ }
+
+ if (done)
+ break;
+ }
+} /* End of main */
+
diff --git a/expat/expat.dsw b/expat/expat.dsw
deleted file mode 100755
index 6536b7f..0000000
--- a/expat/expat.dsw
+++ /dev/null
@@ -1,74 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "gennmtab"=.\gennmtab\gennmtab.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "xmlparse"=.\xmlparse\xmlparse.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
- Begin Project Dependency
- Project_Dep_Name xmltok
- End Project Dependency
-}}}
-
-###############################################################################
-
-Project: "xmltok"=.\xmltok\xmltok.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
- Begin Project Dependency
- Project_Dep_Name gennmtab
- End Project Dependency
-}}}
-
-###############################################################################
-
-Project: "xmlwf"=.\xmlwf\xmlwf.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
- Begin Project Dependency
- Project_Dep_Name xmlparse
- End Project Dependency
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-
diff --git a/expat/expat.html b/expat/expat.html
deleted file mode 100755
index ed65194..0000000
--- a/expat/expat.html
+++ /dev/null
@@ -1,80 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
-"http://www.w3.org/TR/REC-html40/loose.dtd">
-
-<HTML>
-
-<TITLE>expat</TITLE>
-
-<BODY>
-
-<H1>expat - XML Parser Toolkit</H1>
-
-<H3>Version 20000512</H3>
-
-<P>Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center
-Ltd. Expat is freely available with source under a very liberal <a
-href="copying.txt">license</a> (the MIT license).</P>
-
-<P>This is a test version of expat which adds support for parsing
-external DTDs and parameter entities. Compiling with -DXML_DTD
-enables this support. There's a new <CODE>-p</CODE> option for xmlwf
-which will cause it to process external DTDs and parameter entities;
-this implies the <CODE>-x</CODE> option. See the comment above
-<CODE>XML_SetParamEntityParsing</CODE> in <CODE>xmlparse.h</CODE> for
-the API addition that enables this.</P>
-
-<P>Expat is an <A
-HREF="http://www.w3.org/TR/1998/REC-xml-19980210">XML 1.0</A> parser
-written in C. It aims to be fully conforming. It is currently not a
-validating XML processor. The current production version of expat can
-be downloaded from <A href =
-"http://www.ThaiOpenSource.com/dist/expat/expat.zip"
->http://www.ThaiOpenSource.com/dist/expat/expat.zip</A>.</P>
-
-<P>The directory <SAMP>xmltok</SAMP> contains a low-level library for
-tokenizing XML. The interface is documented in
-<SAMP>xmltok/xmltok.h</SAMP>.</P>
-
-<P>The directory <SAMP>xmlparse</SAMP> contains an XML parser library
-which is built on top of the <SAMP>xmltok</SAMP> library. The
-interface is documented in <SAMP>xmlparse/xmlparse.h</SAMP>. The
-directory <SAMP>sample</SAMP> contains a simple example program using
-this interface; <SAMP>sample/build.bat</SAMP> is a batch file to build
-the example using Visual C++.</P>
-
-<P>The directory <SAMP>xmlwf</SAMP> contains the <SAMP>xmlwf</SAMP>
-application, which uses the <SAMP>xmlparse</SAMP> library. The
-arguments to <SAMP>xmlwf</SAMP> are one or more files which are each
-to be checked for well-formedness. An option <SAMP>-d
-<VAR>dir</VAR></SAMP> can be specified; for each well-formed input
-file the corresponding <A
-href="http://www.jclark.com/xml/canonxml.html">canonical XML</A> will
-be written to <SAMP>dir/<VAR>f</VAR></SAMP>, where
-<SAMP><VAR>f</VAR></SAMP> is the filename (without any path) of the
-input file. A <CODE>-x</CODE> option will cause references to
-external general entities to be processed. A <CODE>-s</CODE> option
-will make documents that are not standalone cause an error (a document
-is considered standalone if either it is intrinsically standalone
-because it has no external subset and no references to parameter
-entities in the internal subset or it is declared as standalone in the
-XML declaration).</P>
-
-<P>The <SAMP>bin</SAMP> directory contains Win32 executables. The
-<SAMP>lib</SAMP> directory contains Win32 import libraries.</P>
-
-<P>Answers to some frequently asked questions about expat can be found
-in the <A
-HREF="http://www.ThaiOpenSource.com/product/expat/expatfaq.html">expat
-FAQ</A>.</P>
-
-<P></P>
-
-<ADDRESS>
-
-<A HREF="mailto:jjc@ThaiOpenSource.com">James Clark</A>
-
-</ADDRESS>
-
-</BODY>
-
-</HTML>
diff --git a/expat/files.txt b/expat/files.txt
deleted file mode 100755
index 968c189..0000000
--- a/expat/files.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-expat.html
-xmltok/ascii.h
-xmltok/asciitab.h
-xmltok/dllmain.c
-gennmtab/gennmtab.c
-xmltok/iasciitab.h
-xmltok/latin1tab.h
-Makefile
-xmltok/nametab.h
-xmltok/utf8tab.h
-xmltok/xmldef.h
-xmltok/xmlrole.c
-xmltok/xmlrole.h
-xmltok/xmltok.c
-xmltok/xmltok.h
-xmltok/xmltok_impl.c
-xmltok/xmltok_impl.h
-xmltok/xmltok_ns.c
-xmlparse/xmlparse.c
-xmlparse/xmlparse.h
-xmlwf/codepage.c
-xmlwf/codepage.h
-xmlwf/filemap.h
-xmlwf/readfilemap.c
-xmlwf/unixfilemap.c
-xmlwf/win32filemap.c
-xmlwf/xmlfile.c
-xmlwf/xmlfile.h
-xmlwf/xmltchar.h
-xmlwf/xmlwf.c
-sample/elements.c
diff --git a/expat/lib/Makefile.in b/expat/lib/Makefile.in
new file mode 100644
index 0000000..efc8909
--- /dev/null
+++ b/expat/lib/Makefile.in
@@ -0,0 +1,178 @@
+################################################################
+# Process this file with top-level configure script to produce Makefile
+#
+# Copyright 2000 Clark Cooper
+#
+# This file is part of EXPAT.
+#
+# EXPAT is free software; you can redistribute it and/or modify it
+# under the terms of the License (based on the MIT/X license) contained
+# in the file COPYING that comes with this distribution.
+#
+# EXPAT IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+# SOFTWARE OR THE USE OR OTHER DEALINGS IN EXPAT.
+#
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+subdir = lib
+
+DESTDIR =
+
+top_builddir = ..
+
+AUTOCONF = @AUTOCONF@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_DATA = @INSTALL_DATA@
+
+host_alias = @host_alias@
+host_triplet = @host@
+AS = @AS@
+CC = @CC@
+DLLTOOL = @DLLTOOL@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+LIBRARY = libexpat.la
+SOURCES = xmlparse.c xmltok.c xmlrole.c
+OBJECTS = $(SOURCES:.c=.o)
+LTOBJECTS = $(SOURCES:.c=.lo)
+
+TEMPLATES = xmltok_impl.c xmltok_ns.c
+APIHEADER = expat.h
+HEADERS = ascii.h iasciitab.h utf8tab.h xmltok.h asciitab.h latin1tab.h \
+ nametab.h xmldef.h xmlrole.h xmltok_impl.h
+
+mkinstalldirs = $(SHELL) $(top_srcdir)/conftools/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON = Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(TEMPLATES) $(APIHEADER) $(HEADERS)
+
+TAR = gtar
+GZIP_ENV = --best
+
+all: $(LIBRARY)
+
+.SUFFIXES: .c .lo .o
+.PHONY: all clean distclean maintainer-clean distdir
+
+%.o: %.c
+ @echo '$(COMPILE) -c $<'; \
+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
+
+%.lo: %.c
+ @echo '$(LTCOMPILE) -c $<'; \
+ test -d .deps || mkdir .deps ; \
+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(top_builddir)/config.status: $(top_builddir)/configure
+ cd $(top_builddir) && $(MAKE) config.status
+
+$(top_builddir)/config.h: $(top_builddir)/config.hin
+ cd $(top_builddir) && $(MAKE) config.h
+
+clean:
+ rm -f $(LIBRARY) *.o *.lo
+ rm -rf .libs _libs
+
+distclean: clean
+
+maintainer-clean: distclean
+
+install: $(LIBRARY) $(APIHEADER)
+ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir)
+ $(LIBTOOL) --mode=install $(INSTALL) $(LIBRARY) $(DESTDIR)$(libdir)/$(LIBRARY)
+ $(INSTALL_DATA) $(APIHEADER) $(DESTDIR)$(includedir)
+
+uninstall:
+ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$(LIBRARY);
+ rm -f $(DESTDIR)$(libdir)/$(APIHEADER)
+
+$(LIBRARY): $(LTOBJECTS)
+ $(LINK) -rpath $(libdir) $(LDFLAGS) $(LTOBJECTS)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+distdir: $(DISTFILES)
+ @here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+
+xmlparse.o: xmlparse.c expat.h xmlrole.h xmltok.h $(top_builddir)/config.h
+
+xmlrole.o: xmlrole.c ascii.h xmldef.h xmlrole.h $(top_builddir)/config.h
+
+xmltok.o: xmltok.c xmltok_impl.c xmltok_ns.c \
+ ascii.h asciitab.h iasciitab.h latin1tab.h nametab.h utf8tab.h \
+ xmldef.h xmltok.h xmltok_impl.h $(top_builddir)/config.h
diff --git a/expat/xmltok/ascii.h b/expat/lib/ascii.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/ascii.h
rename to expat/lib/ascii.h
diff --git a/expat/xmltok/asciitab.h b/expat/lib/asciitab.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/asciitab.h
rename to expat/lib/asciitab.h
diff --git a/expat/xmlparse/xmlparse.h b/expat/lib/expat.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmlparse/xmlparse.h
rename to expat/lib/expat.h
diff --git a/expat/xmltok/iasciitab.h b/expat/lib/iasciitab.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/iasciitab.h
rename to expat/lib/iasciitab.h
diff --git a/expat/xmltok/latin1tab.h b/expat/lib/latin1tab.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/latin1tab.h
rename to expat/lib/latin1tab.h
diff --git a/expat/lib/nametab.h b/expat/lib/nametab.h
new file mode 100644
index 0000000..b05e62c
--- /dev/null
+++ b/expat/lib/nametab.h
@@ -0,0 +1,150 @@
+static const unsigned namingBitmap[] = {
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+0x00000000, 0x04000000, 0x87FFFFFE, 0x07FFFFFE,
+0x00000000, 0x00000000, 0xFF7FFFFF, 0xFF7FFFFF,
+0xFFFFFFFF, 0x7FF3FFFF, 0xFFFFFDFE, 0x7FFFFFFF,
+0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFE00F, 0xFC31FFFF,
+0x00FFFFFF, 0x00000000, 0xFFFF0000, 0xFFFFFFFF,
+0xFFFFFFFF, 0xF80001FF, 0x00000003, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0xFFFFD740, 0xFFFFFFFB, 0x547F7FFF, 0x000FFFFD,
+0xFFFFDFFE, 0xFFFFFFFF, 0xDFFEFFFF, 0xFFFFFFFF,
+0xFFFF0003, 0xFFFFFFFF, 0xFFFF199F, 0x033FCFFF,
+0x00000000, 0xFFFE0000, 0x027FFFFF, 0xFFFFFFFE,
+0x0000007F, 0x00000000, 0xFFFF0000, 0x000707FF,
+0x00000000, 0x07FFFFFE, 0x000007FE, 0xFFFE0000,
+0xFFFFFFFF, 0x7CFFFFFF, 0x002F7FFF, 0x00000060,
+0xFFFFFFE0, 0x23FFFFFF, 0xFF000000, 0x00000003,
+0xFFF99FE0, 0x03C5FDFF, 0xB0000000, 0x00030003,
+0xFFF987E0, 0x036DFDFF, 0x5E000000, 0x001C0000,
+0xFFFBAFE0, 0x23EDFDFF, 0x00000000, 0x00000001,
+0xFFF99FE0, 0x23CDFDFF, 0xB0000000, 0x00000003,
+0xD63DC7E0, 0x03BFC718, 0x00000000, 0x00000000,
+0xFFFDDFE0, 0x03EFFDFF, 0x00000000, 0x00000003,
+0xFFFDDFE0, 0x03EFFDFF, 0x40000000, 0x00000003,
+0xFFFDDFE0, 0x03FFFDFF, 0x00000000, 0x00000003,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0xFFFFFFFE, 0x000D7FFF, 0x0000003F, 0x00000000,
+0xFEF02596, 0x200D6CAE, 0x0000001F, 0x00000000,
+0x00000000, 0x00000000, 0xFFFFFEFF, 0x000003FF,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0xFFFFFFFF, 0xFFFF003F, 0x007FFFFF,
+0x0007DAED, 0x50000000, 0x82315001, 0x002C62AB,
+0x40000000, 0xF580C900, 0x00000007, 0x02010800,
+0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+0x0FFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x03FFFFFF,
+0x3F3FFFFF, 0xFFFFFFFF, 0xAAFF3F3F, 0x3FFFFFFF,
+0xFFFFFFFF, 0x5FDFFFFF, 0x0FCF1FDC, 0x1FDC1FFF,
+0x00000000, 0x00004C40, 0x00000000, 0x00000000,
+0x00000007, 0x00000000, 0x00000000, 0x00000000,
+0x00000080, 0x000003FE, 0xFFFFFFFE, 0xFFFFFFFF,
+0x001FFFFF, 0xFFFFFFFE, 0xFFFFFFFF, 0x07FFFFFF,
+0xFFFFFFE0, 0x00001FFF, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+0xFFFFFFFF, 0x0000003F, 0x00000000, 0x00000000,
+0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+0xFFFFFFFF, 0x0000000F, 0x00000000, 0x00000000,
+0x00000000, 0x07FF6000, 0x87FFFFFE, 0x07FFFFFE,
+0x00000000, 0x00800000, 0xFF7FFFFF, 0xFF7FFFFF,
+0x00FFFFFF, 0x00000000, 0xFFFF0000, 0xFFFFFFFF,
+0xFFFFFFFF, 0xF80001FF, 0x00030003, 0x00000000,
+0xFFFFFFFF, 0xFFFFFFFF, 0x0000003F, 0x00000003,
+0xFFFFD7C0, 0xFFFFFFFB, 0x547F7FFF, 0x000FFFFD,
+0xFFFFDFFE, 0xFFFFFFFF, 0xDFFEFFFF, 0xFFFFFFFF,
+0xFFFF007B, 0xFFFFFFFF, 0xFFFF199F, 0x033FCFFF,
+0x00000000, 0xFFFE0000, 0x027FFFFF, 0xFFFFFFFE,
+0xFFFE007F, 0xBBFFFFFB, 0xFFFF0016, 0x000707FF,
+0x00000000, 0x07FFFFFE, 0x0007FFFF, 0xFFFF03FF,
+0xFFFFFFFF, 0x7CFFFFFF, 0xFFEF7FFF, 0x03FF3DFF,
+0xFFFFFFEE, 0xF3FFFFFF, 0xFF1E3FFF, 0x0000FFCF,
+0xFFF99FEE, 0xD3C5FDFF, 0xB080399F, 0x0003FFCF,
+0xFFF987E4, 0xD36DFDFF, 0x5E003987, 0x001FFFC0,
+0xFFFBAFEE, 0xF3EDFDFF, 0x00003BBF, 0x0000FFC1,
+0xFFF99FEE, 0xF3CDFDFF, 0xB0C0398F, 0x0000FFC3,
+0xD63DC7EC, 0xC3BFC718, 0x00803DC7, 0x0000FF80,
+0xFFFDDFEE, 0xC3EFFDFF, 0x00603DDF, 0x0000FFC3,
+0xFFFDDFEC, 0xC3EFFDFF, 0x40603DDF, 0x0000FFC3,
+0xFFFDDFEC, 0xC3FFFDFF, 0x00803DCF, 0x0000FFC3,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0xFFFFFFFE, 0x07FF7FFF, 0x03FF7FFF, 0x00000000,
+0xFEF02596, 0x3BFF6CAE, 0x03FF3F5F, 0x00000000,
+0x03000000, 0xC2A003FF, 0xFFFFFEFF, 0xFFFE03FF,
+0xFEBF0FDF, 0x02FE3FFF, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x00000000, 0x00000000,
+0x00000000, 0x00000000, 0x1FFF0000, 0x00000002,
+0x000000A0, 0x003EFFFE, 0xFFFFFFFE, 0xFFFFFFFF,
+0x661FFFFF, 0xFFFFFFFE, 0xFFFFFFFF, 0x77FFFFFF,
+};
+static const unsigned char nmstrtPages[] = {
+0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x00,
+0x00, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0x13,
+0x00, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x15, 0x16, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x17,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+static const unsigned char namePages[] = {
+0x19, 0x03, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x00,
+0x00, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
+0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0x13,
+0x26, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x27, 0x16, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x17,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
diff --git a/expat/xmltok/utf8tab.h b/expat/lib/utf8tab.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/utf8tab.h
rename to expat/lib/utf8tab.h
diff --git a/expat/xmltok/xmldef.h b/expat/lib/xmldef.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/xmldef.h
rename to expat/lib/xmldef.h
diff --git a/expat/xmlparse/xmlparse.c b/expat/lib/xmlparse.c
old mode 100755
new mode 100644
similarity index 99%
rename from expat/xmlparse/xmlparse.c
rename to expat/lib/xmlparse.c
index d11a146..42fb3cd
--- a/expat/xmlparse/xmlparse.c
+++ b/expat/lib/xmlparse.c
@@ -3,8 +3,8 @@
See the file copying.txt for copying permission.
*/
-#include "xmldef.h"
-#include "xmlparse.h"
+#include <config.h>
+#include "expat.h"
#include <stddef.h>
#ifdef XML_UNICODE
diff --git a/expat/xmltok/xmlrole.c b/expat/lib/xmlrole.c
old mode 100755
new mode 100644
similarity index 99%
rename from expat/xmltok/xmlrole.c
rename to expat/lib/xmlrole.c
index 8eaba3a..a41acc6
--- a/expat/xmltok/xmlrole.c
+++ b/expat/lib/xmlrole.c
@@ -3,6 +3,7 @@
See the file copying.txt for copying permission.
*/
+#include <config.h>
#include "xmldef.h"
#include "xmlrole.h"
#include "ascii.h"
diff --git a/expat/xmltok/xmlrole.h b/expat/lib/xmlrole.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/xmlrole.h
rename to expat/lib/xmlrole.h
diff --git a/expat/lib/xmltok.c b/expat/lib/xmltok.c
new file mode 100644
index 0000000..64fae59
--- /dev/null
+++ b/expat/lib/xmltok.c
@@ -0,0 +1,1558 @@
+/*
+Copyright (c) 1998, 1999 Thai Open Source Software Center Ltd
+See the file copying.txt for copying permission.
+*/
+
+#include <config.h>
+#include "xmldef.h"
+#include "xmltok.h"
+#include "nametab.h"
+
+#ifdef XML_DTD
+#define IGNORE_SECTION_TOK_VTABLE , PREFIX(ignoreSectionTok)
+#else
+#define IGNORE_SECTION_TOK_VTABLE /* as nothing */
+#endif
+
+#define VTABLE1 \
+ { PREFIX(prologTok), PREFIX(contentTok), \
+ PREFIX(cdataSectionTok) IGNORE_SECTION_TOK_VTABLE }, \
+ { PREFIX(attributeValueTok), PREFIX(entityValueTok) }, \
+ PREFIX(sameName), \
+ PREFIX(nameMatchesAscii), \
+ PREFIX(nameLength), \
+ PREFIX(skipS), \
+ PREFIX(getAtts), \
+ PREFIX(charRefNumber), \
+ PREFIX(predefinedEntityName), \
+ PREFIX(updatePosition), \
+ PREFIX(isPublicId)
+
+#define VTABLE VTABLE1, PREFIX(toUtf8), PREFIX(toUtf16)
+
+#define UCS2_GET_NAMING(pages, hi, lo) \
+ (namingBitmap[(pages[hi] << 3) + ((lo) >> 5)] & (1 << ((lo) & 0x1F)))
+
+/* A 2 byte UTF-8 representation splits the characters 11 bits
+between the bottom 5 and 6 bits of the bytes.
+We need 8 bits to index into pages, 3 bits to add to that index and
+5 bits to generate the mask. */
+#define UTF8_GET_NAMING2(pages, byte) \
+ (namingBitmap[((pages)[(((byte)[0]) >> 2) & 7] << 3) \
+ + ((((byte)[0]) & 3) << 1) \
+ + ((((byte)[1]) >> 5) & 1)] \
+ & (1 << (((byte)[1]) & 0x1F)))
+
+/* A 3 byte UTF-8 representation splits the characters 16 bits
+between the bottom 4, 6 and 6 bits of the bytes.
+We need 8 bits to index into pages, 3 bits to add to that index and
+5 bits to generate the mask. */
+#define UTF8_GET_NAMING3(pages, byte) \
+ (namingBitmap[((pages)[((((byte)[0]) & 0xF) << 4) \
+ + ((((byte)[1]) >> 2) & 0xF)] \
+ << 3) \
+ + ((((byte)[1]) & 3) << 1) \
+ + ((((byte)[2]) >> 5) & 1)] \
+ & (1 << (((byte)[2]) & 0x1F)))
+
+#define UTF8_GET_NAMING(pages, p, n) \
+ ((n) == 2 \
+ ? UTF8_GET_NAMING2(pages, (const unsigned char *)(p)) \
+ : ((n) == 3 \
+ ? UTF8_GET_NAMING3(pages, (const unsigned char *)(p)) \
+ : 0))
+
+#define UTF8_INVALID3(p) \
+ ((*p) == 0xED \
+ ? (((p)[1] & 0x20) != 0) \
+ : ((*p) == 0xEF \
+ ? ((p)[1] == 0xBF && ((p)[2] == 0xBF || (p)[2] == 0xBE)) \
+ : 0))
+
+#define UTF8_INVALID4(p) ((*p) == 0xF4 && ((p)[1] & 0x30) != 0)
+
+static
+int isNever(const ENCODING *enc, const char *p)
+{
+ return 0;
+}
+
+static
+int utf8_isName2(const ENCODING *enc, const char *p)
+{
+ return UTF8_GET_NAMING2(namePages, (const unsigned char *)p);
+}
+
+static
+int utf8_isName3(const ENCODING *enc, const char *p)
+{
+ return UTF8_GET_NAMING3(namePages, (const unsigned char *)p);
+}
+
+#define utf8_isName4 isNever
+
+static
+int utf8_isNmstrt2(const ENCODING *enc, const char *p)
+{
+ return UTF8_GET_NAMING2(nmstrtPages, (const unsigned char *)p);
+}
+
+static
+int utf8_isNmstrt3(const ENCODING *enc, const char *p)
+{
+ return UTF8_GET_NAMING3(nmstrtPages, (const unsigned char *)p);
+}
+
+#define utf8_isNmstrt4 isNever
+
+#define utf8_isInvalid2 isNever
+
+static
+int utf8_isInvalid3(const ENCODING *enc, const char *p)
+{
+ return UTF8_INVALID3((const unsigned char *)p);
+}
+
+static
+int utf8_isInvalid4(const ENCODING *enc, const char *p)
+{
+ return UTF8_INVALID4((const unsigned char *)p);
+}
+
+struct normal_encoding {
+ ENCODING enc;
+ unsigned char type[256];
+#ifdef XML_MIN_SIZE
+ int (*byteType)(const ENCODING *, const char *);
+ int (*isNameMin)(const ENCODING *, const char *);
+ int (*isNmstrtMin)(const ENCODING *, const char *);
+ int (*byteToAscii)(const ENCODING *, const char *);
+ int (*charMatches)(const ENCODING *, const char *, int);
+#endif /* XML_MIN_SIZE */
+ int (*isName2)(const ENCODING *, const char *);
+ int (*isName3)(const ENCODING *, const char *);
+ int (*isName4)(const ENCODING *, const char *);
+ int (*isNmstrt2)(const ENCODING *, const char *);
+ int (*isNmstrt3)(const ENCODING *, const char *);
+ int (*isNmstrt4)(const ENCODING *, const char *);
+ int (*isInvalid2)(const ENCODING *, const char *);
+ int (*isInvalid3)(const ENCODING *, const char *);
+ int (*isInvalid4)(const ENCODING *, const char *);
+};
+
+#ifdef XML_MIN_SIZE
+
+#define STANDARD_VTABLE(E) \
+ E ## byteType, \
+ E ## isNameMin, \
+ E ## isNmstrtMin, \
+ E ## byteToAscii, \
+ E ## charMatches,
+
+#else
+
+#define STANDARD_VTABLE(E) /* as nothing */
+
+#endif
+
+#define NORMAL_VTABLE(E) \
+ E ## isName2, \
+ E ## isName3, \
+ E ## isName4, \
+ E ## isNmstrt2, \
+ E ## isNmstrt3, \
+ E ## isNmstrt4, \
+ E ## isInvalid2, \
+ E ## isInvalid3, \
+ E ## isInvalid4
+
+static int checkCharRefNumber(int);
+
+#include "xmltok_impl.h"
+#include "ascii.h"
+
+#ifdef XML_MIN_SIZE
+#define sb_isNameMin isNever
+#define sb_isNmstrtMin isNever
+#endif
+
+#ifdef XML_MIN_SIZE
+#define MINBPC(enc) ((enc)->minBytesPerChar)
+#else
+/* minimum bytes per character */
+#define MINBPC(enc) 1
+#endif
+
+#define SB_BYTE_TYPE(enc, p) \
+ (((struct normal_encoding *)(enc))->type[(unsigned char)*(p)])
+
+#ifdef XML_MIN_SIZE
+static
+int sb_byteType(const ENCODING *enc, const char *p)
+{
+ return SB_BYTE_TYPE(enc, p);
+}
+#define BYTE_TYPE(enc, p) \
+ (((const struct normal_encoding *)(enc))->byteType(enc, p))
+#else
+#define BYTE_TYPE(enc, p) SB_BYTE_TYPE(enc, p)
+#endif
+
+#ifdef XML_MIN_SIZE
+#define BYTE_TO_ASCII(enc, p) \
+ (((const struct normal_encoding *)(enc))->byteToAscii(enc, p))
+static
+int sb_byteToAscii(const ENCODING *enc, const char *p)
+{
+ return *p;
+}
+#else
+#define BYTE_TO_ASCII(enc, p) (*(p))
+#endif
+
+#define IS_NAME_CHAR(enc, p, n) \
+ (((const struct normal_encoding *)(enc))->isName ## n(enc, p))
+#define IS_NMSTRT_CHAR(enc, p, n) \
+ (((const struct normal_encoding *)(enc))->isNmstrt ## n(enc, p))
+#define IS_INVALID_CHAR(enc, p, n) \
+ (((const struct normal_encoding *)(enc))->isInvalid ## n(enc, p))
+
+#ifdef XML_MIN_SIZE
+#define IS_NAME_CHAR_MINBPC(enc, p) \
+ (((const struct normal_encoding *)(enc))->isNameMin(enc, p))
+#define IS_NMSTRT_CHAR_MINBPC(enc, p) \
+ (((const struct normal_encoding *)(enc))->isNmstrtMin(enc, p))
+#else
+#define IS_NAME_CHAR_MINBPC(enc, p) (0)
+#define IS_NMSTRT_CHAR_MINBPC(enc, p) (0)
+#endif
+
+#ifdef XML_MIN_SIZE
+#define CHAR_MATCHES(enc, p, c) \
+ (((const struct normal_encoding *)(enc))->charMatches(enc, p, c))
+static
+int sb_charMatches(const ENCODING *enc, const char *p, int c)
+{
+ return *p == c;
+}
+#else
+/* c is an ASCII character */
+#define CHAR_MATCHES(enc, p, c) (*(p) == c)
+#endif
+
+#define PREFIX(ident) normal_ ## ident
+#include "xmltok_impl.c"
+
+#undef MINBPC
+#undef BYTE_TYPE
+#undef BYTE_TO_ASCII
+#undef CHAR_MATCHES
+#undef IS_NAME_CHAR
+#undef IS_NAME_CHAR_MINBPC
+#undef IS_NMSTRT_CHAR
+#undef IS_NMSTRT_CHAR_MINBPC
+#undef IS_INVALID_CHAR
+
+enum { /* UTF8_cvalN is value of masked first byte of N byte sequence */
+ UTF8_cval1 = 0x00,
+ UTF8_cval2 = 0xc0,
+ UTF8_cval3 = 0xe0,
+ UTF8_cval4 = 0xf0
+};
+
+static
+void utf8_toUtf8(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ char **toP, const char *toLim)
+{
+ char *to;
+ const char *from;
+ if (fromLim - *fromP > toLim - *toP) {
+ /* Avoid copying partial characters. */
+ for (fromLim = *fromP + (toLim - *toP); fromLim > *fromP; fromLim--)
+ if (((unsigned char)fromLim[-1] & 0xc0) != 0x80)
+ break;
+ }
+ for (to = *toP, from = *fromP; from != fromLim; from++, to++)
+ *to = *from;
+ *fromP = from;
+ *toP = to;
+}
+
+static
+void utf8_toUtf16(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ unsigned short **toP, const unsigned short *toLim)
+{
+ unsigned short *to = *toP;
+ const char *from = *fromP;
+ while (from != fromLim && to != toLim) {
+ switch (((struct normal_encoding *)enc)->type[(unsigned char)*from]) {
+ case BT_LEAD2:
+ *to++ = ((from[0] & 0x1f) << 6) | (from[1] & 0x3f);
+ from += 2;
+ break;
+ case BT_LEAD3:
+ *to++ = ((from[0] & 0xf) << 12) | ((from[1] & 0x3f) << 6) | (from[2] & 0x3f);
+ from += 3;
+ break;
+ case BT_LEAD4:
+ {
+ unsigned long n;
+ if (to + 1 == toLim)
+ break;
+ n = ((from[0] & 0x7) << 18) | ((from[1] & 0x3f) << 12) | ((from[2] & 0x3f) << 6) | (from[3] & 0x3f);
+ n -= 0x10000;
+ to[0] = (unsigned short)((n >> 10) | 0xD800);
+ to[1] = (unsigned short)((n & 0x3FF) | 0xDC00);
+ to += 2;
+ from += 4;
+ }
+ break;
+ default:
+ *to++ = *from++;
+ break;
+ }
+ }
+ *fromP = from;
+ *toP = to;
+}
+
+#ifdef XML_NS
+static const struct normal_encoding utf8_encoding_ns = {
+ { VTABLE1, utf8_toUtf8, utf8_toUtf16, 1, 1, 0 },
+ {
+#include "asciitab.h"
+#include "utf8tab.h"
+ },
+ STANDARD_VTABLE(sb_) NORMAL_VTABLE(utf8_)
+};
+#endif
+
+static const struct normal_encoding utf8_encoding = {
+ { VTABLE1, utf8_toUtf8, utf8_toUtf16, 1, 1, 0 },
+ {
+#define BT_COLON BT_NMSTRT
+#include "asciitab.h"
+#undef BT_COLON
+#include "utf8tab.h"
+ },
+ STANDARD_VTABLE(sb_) NORMAL_VTABLE(utf8_)
+};
+
+#ifdef XML_NS
+
+static const struct normal_encoding internal_utf8_encoding_ns = {
+ { VTABLE1, utf8_toUtf8, utf8_toUtf16, 1, 1, 0 },
+ {
+#include "iasciitab.h"
+#include "utf8tab.h"
+ },
+ STANDARD_VTABLE(sb_) NORMAL_VTABLE(utf8_)
+};
+
+#endif
+
+static const struct normal_encoding internal_utf8_encoding = {
+ { VTABLE1, utf8_toUtf8, utf8_toUtf16, 1, 1, 0 },
+ {
+#define BT_COLON BT_NMSTRT
+#include "iasciitab.h"
+#undef BT_COLON
+#include "utf8tab.h"
+ },
+ STANDARD_VTABLE(sb_) NORMAL_VTABLE(utf8_)
+};
+
+static
+void latin1_toUtf8(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ char **toP, const char *toLim)
+{
+ for (;;) {
+ unsigned char c;
+ if (*fromP == fromLim)
+ break;
+ c = (unsigned char)**fromP;
+ if (c & 0x80) {
+ if (toLim - *toP < 2)
+ break;
+ *(*toP)++ = ((c >> 6) | UTF8_cval2);
+ *(*toP)++ = ((c & 0x3f) | 0x80);
+ (*fromP)++;
+ }
+ else {
+ if (*toP == toLim)
+ break;
+ *(*toP)++ = *(*fromP)++;
+ }
+ }
+}
+
+static
+void latin1_toUtf16(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ unsigned short **toP, const unsigned short *toLim)
+{
+ while (*fromP != fromLim && *toP != toLim)
+ *(*toP)++ = (unsigned char)*(*fromP)++;
+}
+
+#ifdef XML_NS
+
+static const struct normal_encoding latin1_encoding_ns = {
+ { VTABLE1, latin1_toUtf8, latin1_toUtf16, 1, 0, 0 },
+ {
+#include "asciitab.h"
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(sb_)
+};
+
+#endif
+
+static const struct normal_encoding latin1_encoding = {
+ { VTABLE1, latin1_toUtf8, latin1_toUtf16, 1, 0, 0 },
+ {
+#define BT_COLON BT_NMSTRT
+#include "asciitab.h"
+#undef BT_COLON
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(sb_)
+};
+
+static
+void ascii_toUtf8(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ char **toP, const char *toLim)
+{
+ while (*fromP != fromLim && *toP != toLim)
+ *(*toP)++ = *(*fromP)++;
+}
+
+#ifdef XML_NS
+
+static const struct normal_encoding ascii_encoding_ns = {
+ { VTABLE1, ascii_toUtf8, latin1_toUtf16, 1, 1, 0 },
+ {
+#include "asciitab.h"
+/* BT_NONXML == 0 */
+ },
+ STANDARD_VTABLE(sb_)
+};
+
+#endif
+
+static const struct normal_encoding ascii_encoding = {
+ { VTABLE1, ascii_toUtf8, latin1_toUtf16, 1, 1, 0 },
+ {
+#define BT_COLON BT_NMSTRT
+#include "asciitab.h"
+#undef BT_COLON
+/* BT_NONXML == 0 */
+ },
+ STANDARD_VTABLE(sb_)
+};
+
+static int unicode_byte_type(char hi, char lo)
+{
+ switch ((unsigned char)hi) {
+ case 0xD8: case 0xD9: case 0xDA: case 0xDB:
+ return BT_LEAD4;
+ case 0xDC: case 0xDD: case 0xDE: case 0xDF:
+ return BT_TRAIL;
+ case 0xFF:
+ switch ((unsigned char)lo) {
+ case 0xFF:
+ case 0xFE:
+ return BT_NONXML;
+ }
+ break;
+ }
+ return BT_NONASCII;
+}
+
+#define DEFINE_UTF16_TO_UTF8(E) \
+static \
+void E ## toUtf8(const ENCODING *enc, \
+ const char **fromP, const char *fromLim, \
+ char **toP, const char *toLim) \
+{ \
+ const char *from; \
+ for (from = *fromP; from != fromLim; from += 2) { \
+ int plane; \
+ unsigned char lo2; \
+ unsigned char lo = GET_LO(from); \
+ unsigned char hi = GET_HI(from); \
+ switch (hi) { \
+ case 0: \
+ if (lo < 0x80) { \
+ if (*toP == toLim) { \
+ *fromP = from; \
+ return; \
+ } \
+ *(*toP)++ = lo; \
+ break; \
+ } \
+ /* fall through */ \
+ case 0x1: case 0x2: case 0x3: \
+ case 0x4: case 0x5: case 0x6: case 0x7: \
+ if (toLim - *toP < 2) { \
+ *fromP = from; \
+ return; \
+ } \
+ *(*toP)++ = ((lo >> 6) | (hi << 2) | UTF8_cval2); \
+ *(*toP)++ = ((lo & 0x3f) | 0x80); \
+ break; \
+ default: \
+ if (toLim - *toP < 3) { \
+ *fromP = from; \
+ return; \
+ } \
+ /* 16 bits divided 4, 6, 6 amongst 3 bytes */ \
+ *(*toP)++ = ((hi >> 4) | UTF8_cval3); \
+ *(*toP)++ = (((hi & 0xf) << 2) | (lo >> 6) | 0x80); \
+ *(*toP)++ = ((lo & 0x3f) | 0x80); \
+ break; \
+ case 0xD8: case 0xD9: case 0xDA: case 0xDB: \
+ if (toLim - *toP < 4) { \
+ *fromP = from; \
+ return; \
+ } \
+ plane = (((hi & 0x3) << 2) | ((lo >> 6) & 0x3)) + 1; \
+ *(*toP)++ = ((plane >> 2) | UTF8_cval4); \
+ *(*toP)++ = (((lo >> 2) & 0xF) | ((plane & 0x3) << 4) | 0x80); \
+ from += 2; \
+ lo2 = GET_LO(from); \
+ *(*toP)++ = (((lo & 0x3) << 4) \
+ | ((GET_HI(from) & 0x3) << 2) \
+ | (lo2 >> 6) \
+ | 0x80); \
+ *(*toP)++ = ((lo2 & 0x3f) | 0x80); \
+ break; \
+ } \
+ } \
+ *fromP = from; \
+}
+
+#define DEFINE_UTF16_TO_UTF16(E) \
+static \
+void E ## toUtf16(const ENCODING *enc, \
+ const char **fromP, const char *fromLim, \
+ unsigned short **toP, const unsigned short *toLim) \
+{ \
+ /* Avoid copying first half only of surrogate */ \
+ if (fromLim - *fromP > ((toLim - *toP) << 1) \
+ && (GET_HI(fromLim - 2) & 0xF8) == 0xD8) \
+ fromLim -= 2; \
+ for (; *fromP != fromLim && *toP != toLim; *fromP += 2) \
+ *(*toP)++ = (GET_HI(*fromP) << 8) | GET_LO(*fromP); \
+}
+
+#define SET2(ptr, ch) \
+ (((ptr)[0] = ((ch) & 0xff)), ((ptr)[1] = ((ch) >> 8)))
+#define GET_LO(ptr) ((unsigned char)(ptr)[0])
+#define GET_HI(ptr) ((unsigned char)(ptr)[1])
+
+DEFINE_UTF16_TO_UTF8(little2_)
+DEFINE_UTF16_TO_UTF16(little2_)
+
+#undef SET2
+#undef GET_LO
+#undef GET_HI
+
+#define SET2(ptr, ch) \
+ (((ptr)[0] = ((ch) >> 8)), ((ptr)[1] = ((ch) & 0xFF)))
+#define GET_LO(ptr) ((unsigned char)(ptr)[1])
+#define GET_HI(ptr) ((unsigned char)(ptr)[0])
+
+DEFINE_UTF16_TO_UTF8(big2_)
+DEFINE_UTF16_TO_UTF16(big2_)
+
+#undef SET2
+#undef GET_LO
+#undef GET_HI
+
+#define LITTLE2_BYTE_TYPE(enc, p) \
+ ((p)[1] == 0 \
+ ? ((struct normal_encoding *)(enc))->type[(unsigned char)*(p)] \
+ : unicode_byte_type((p)[1], (p)[0]))
+#define LITTLE2_BYTE_TO_ASCII(enc, p) ((p)[1] == 0 ? (p)[0] : -1)
+#define LITTLE2_CHAR_MATCHES(enc, p, c) ((p)[1] == 0 && (p)[0] == c)
+#define LITTLE2_IS_NAME_CHAR_MINBPC(enc, p) \
+ UCS2_GET_NAMING(namePages, (unsigned char)p[1], (unsigned char)p[0])
+#define LITTLE2_IS_NMSTRT_CHAR_MINBPC(enc, p) \
+ UCS2_GET_NAMING(nmstrtPages, (unsigned char)p[1], (unsigned char)p[0])
+
+#ifdef XML_MIN_SIZE
+
+static
+int little2_byteType(const ENCODING *enc, const char *p)
+{
+ return LITTLE2_BYTE_TYPE(enc, p);
+}
+
+static
+int little2_byteToAscii(const ENCODING *enc, const char *p)
+{
+ return LITTLE2_BYTE_TO_ASCII(enc, p);
+}
+
+static
+int little2_charMatches(const ENCODING *enc, const char *p, int c)
+{
+ return LITTLE2_CHAR_MATCHES(enc, p, c);
+}
+
+static
+int little2_isNameMin(const ENCODING *enc, const char *p)
+{
+ return LITTLE2_IS_NAME_CHAR_MINBPC(enc, p);
+}
+
+static
+int little2_isNmstrtMin(const ENCODING *enc, const char *p)
+{
+ return LITTLE2_IS_NMSTRT_CHAR_MINBPC(enc, p);
+}
+
+#undef VTABLE
+#define VTABLE VTABLE1, little2_toUtf8, little2_toUtf16
+
+#else /* not XML_MIN_SIZE */
+
+#undef PREFIX
+#define PREFIX(ident) little2_ ## ident
+#define MINBPC(enc) 2
+/* CHAR_MATCHES is guaranteed to have MINBPC bytes available. */
+#define BYTE_TYPE(enc, p) LITTLE2_BYTE_TYPE(enc, p)
+#define BYTE_TO_ASCII(enc, p) LITTLE2_BYTE_TO_ASCII(enc, p)
+#define CHAR_MATCHES(enc, p, c) LITTLE2_CHAR_MATCHES(enc, p, c)
+#define IS_NAME_CHAR(enc, p, n) 0
+#define IS_NAME_CHAR_MINBPC(enc, p) LITTLE2_IS_NAME_CHAR_MINBPC(enc, p)
+#define IS_NMSTRT_CHAR(enc, p, n) (0)
+#define IS_NMSTRT_CHAR_MINBPC(enc, p) LITTLE2_IS_NMSTRT_CHAR_MINBPC(enc, p)
+
+#include "xmltok_impl.c"
+
+#undef MINBPC
+#undef BYTE_TYPE
+#undef BYTE_TO_ASCII
+#undef CHAR_MATCHES
+#undef IS_NAME_CHAR
+#undef IS_NAME_CHAR_MINBPC
+#undef IS_NMSTRT_CHAR
+#undef IS_NMSTRT_CHAR_MINBPC
+#undef IS_INVALID_CHAR
+
+#endif /* not XML_MIN_SIZE */
+
+#ifdef XML_NS
+
+static const struct normal_encoding little2_encoding_ns = {
+ { VTABLE, 2, 0,
+#if XML_BYTE_ORDER == 12
+ 1
+#else
+ 0
+#endif
+ },
+ {
+#include "asciitab.h"
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(little2_)
+};
+
+#endif
+
+static const struct normal_encoding little2_encoding = {
+ { VTABLE, 2, 0,
+#if XML_BYTE_ORDER == 12
+ 1
+#else
+ 0
+#endif
+ },
+ {
+#define BT_COLON BT_NMSTRT
+#include "asciitab.h"
+#undef BT_COLON
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(little2_)
+};
+
+#if XML_BYTE_ORDER != 21
+
+#ifdef XML_NS
+
+static const struct normal_encoding internal_little2_encoding_ns = {
+ { VTABLE, 2, 0, 1 },
+ {
+#include "iasciitab.h"
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(little2_)
+};
+
+#endif
+
+static const struct normal_encoding internal_little2_encoding = {
+ { VTABLE, 2, 0, 1 },
+ {
+#define BT_COLON BT_NMSTRT
+#include "iasciitab.h"
+#undef BT_COLON
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(little2_)
+};
+
+#endif
+
+
+#define BIG2_BYTE_TYPE(enc, p) \
+ ((p)[0] == 0 \
+ ? ((struct normal_encoding *)(enc))->type[(unsigned char)(p)[1]] \
+ : unicode_byte_type((p)[0], (p)[1]))
+#define BIG2_BYTE_TO_ASCII(enc, p) ((p)[0] == 0 ? (p)[1] : -1)
+#define BIG2_CHAR_MATCHES(enc, p, c) ((p)[0] == 0 && (p)[1] == c)
+#define BIG2_IS_NAME_CHAR_MINBPC(enc, p) \
+ UCS2_GET_NAMING(namePages, (unsigned char)p[0], (unsigned char)p[1])
+#define BIG2_IS_NMSTRT_CHAR_MINBPC(enc, p) \
+ UCS2_GET_NAMING(nmstrtPages, (unsigned char)p[0], (unsigned char)p[1])
+
+#ifdef XML_MIN_SIZE
+
+static
+int big2_byteType(const ENCODING *enc, const char *p)
+{
+ return BIG2_BYTE_TYPE(enc, p);
+}
+
+static
+int big2_byteToAscii(const ENCODING *enc, const char *p)
+{
+ return BIG2_BYTE_TO_ASCII(enc, p);
+}
+
+static
+int big2_charMatches(const ENCODING *enc, const char *p, int c)
+{
+ return BIG2_CHAR_MATCHES(enc, p, c);
+}
+
+static
+int big2_isNameMin(const ENCODING *enc, const char *p)
+{
+ return BIG2_IS_NAME_CHAR_MINBPC(enc, p);
+}
+
+static
+int big2_isNmstrtMin(const ENCODING *enc, const char *p)
+{
+ return BIG2_IS_NMSTRT_CHAR_MINBPC(enc, p);
+}
+
+#undef VTABLE
+#define VTABLE VTABLE1, big2_toUtf8, big2_toUtf16
+
+#else /* not XML_MIN_SIZE */
+
+#undef PREFIX
+#define PREFIX(ident) big2_ ## ident
+#define MINBPC(enc) 2
+/* CHAR_MATCHES is guaranteed to have MINBPC bytes available. */
+#define BYTE_TYPE(enc, p) BIG2_BYTE_TYPE(enc, p)
+#define BYTE_TO_ASCII(enc, p) BIG2_BYTE_TO_ASCII(enc, p)
+#define CHAR_MATCHES(enc, p, c) BIG2_CHAR_MATCHES(enc, p, c)
+#define IS_NAME_CHAR(enc, p, n) 0
+#define IS_NAME_CHAR_MINBPC(enc, p) BIG2_IS_NAME_CHAR_MINBPC(enc, p)
+#define IS_NMSTRT_CHAR(enc, p, n) (0)
+#define IS_NMSTRT_CHAR_MINBPC(enc, p) BIG2_IS_NMSTRT_CHAR_MINBPC(enc, p)
+
+#include "xmltok_impl.c"
+
+#undef MINBPC
+#undef BYTE_TYPE
+#undef BYTE_TO_ASCII
+#undef CHAR_MATCHES
+#undef IS_NAME_CHAR
+#undef IS_NAME_CHAR_MINBPC
+#undef IS_NMSTRT_CHAR
+#undef IS_NMSTRT_CHAR_MINBPC
+#undef IS_INVALID_CHAR
+
+#endif /* not XML_MIN_SIZE */
+
+#ifdef XML_NS
+
+static const struct normal_encoding big2_encoding_ns = {
+ { VTABLE, 2, 0,
+#if XML_BYTE_ORDER == 21
+ 1
+#else
+ 0
+#endif
+ },
+ {
+#include "asciitab.h"
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(big2_)
+};
+
+#endif
+
+static const struct normal_encoding big2_encoding = {
+ { VTABLE, 2, 0,
+#if XML_BYTE_ORDER == 21
+ 1
+#else
+ 0
+#endif
+ },
+ {
+#define BT_COLON BT_NMSTRT
+#include "asciitab.h"
+#undef BT_COLON
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(big2_)
+};
+
+#if XML_BYTE_ORDER != 12
+
+#ifdef XML_NS
+
+static const struct normal_encoding internal_big2_encoding_ns = {
+ { VTABLE, 2, 0, 1 },
+ {
+#include "iasciitab.h"
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(big2_)
+};
+
+#endif
+
+static const struct normal_encoding internal_big2_encoding = {
+ { VTABLE, 2, 0, 1 },
+ {
+#define BT_COLON BT_NMSTRT
+#include "iasciitab.h"
+#undef BT_COLON
+#include "latin1tab.h"
+ },
+ STANDARD_VTABLE(big2_)
+};
+
+#endif
+
+#undef PREFIX
+
+static
+int streqci(const char *s1, const char *s2)
+{
+ for (;;) {
+ char c1 = *s1++;
+ char c2 = *s2++;
+ if (ASCII_a <= c1 && c1 <= ASCII_z)
+ c1 += ASCII_A - ASCII_a;
+ if (ASCII_a <= c2 && c2 <= ASCII_z)
+ c2 += ASCII_A - ASCII_a;
+ if (c1 != c2)
+ return 0;
+ if (!c1)
+ break;
+ }
+ return 1;
+}
+
+static
+void initUpdatePosition(const ENCODING *enc, const char *ptr,
+ const char *end, POSITION *pos)
+{
+ normal_updatePosition(&utf8_encoding.enc, ptr, end, pos);
+}
+
+static
+int toAscii(const ENCODING *enc, const char *ptr, const char *end)
+{
+ char buf[1];
+ char *p = buf;
+ XmlUtf8Convert(enc, &ptr, end, &p, p + 1);
+ if (p == buf)
+ return -1;
+ else
+ return buf[0];
+}
+
+static
+int isSpace(int c)
+{
+ switch (c) {
+ case 0x20:
+ case 0xD:
+ case 0xA:
+ case 0x9:
+ return 1;
+ }
+ return 0;
+}
+
+/* Return 1 if there's just optional white space
+or there's an S followed by name=val. */
+static
+int parsePseudoAttribute(const ENCODING *enc,
+ const char *ptr,
+ const char *end,
+ const char **namePtr,
+ const char **nameEndPtr,
+ const char **valPtr,
+ const char **nextTokPtr)
+{
+ int c;
+ char open;
+ if (ptr == end) {
+ *namePtr = 0;
+ return 1;
+ }
+ if (!isSpace(toAscii(enc, ptr, end))) {
+ *nextTokPtr = ptr;
+ return 0;
+ }
+ do {
+ ptr += enc->minBytesPerChar;
+ } while (isSpace(toAscii(enc, ptr, end)));
+ if (ptr == end) {
+ *namePtr = 0;
+ return 1;
+ }
+ *namePtr = ptr;
+ for (;;) {
+ c = toAscii(enc, ptr, end);
+ if (c == -1) {
+ *nextTokPtr = ptr;
+ return 0;
+ }
+ if (c == ASCII_EQUALS) {
+ *nameEndPtr = ptr;
+ break;
+ }
+ if (isSpace(c)) {
+ *nameEndPtr = ptr;
+ do {
+ ptr += enc->minBytesPerChar;
+ } while (isSpace(c = toAscii(enc, ptr, end)));
+ if (c != ASCII_EQUALS) {
+ *nextTokPtr = ptr;
+ return 0;
+ }
+ break;
+ }
+ ptr += enc->minBytesPerChar;
+ }
+ if (ptr == *namePtr) {
+ *nextTokPtr = ptr;
+ return 0;
+ }
+ ptr += enc->minBytesPerChar;
+ c = toAscii(enc, ptr, end);
+ while (isSpace(c)) {
+ ptr += enc->minBytesPerChar;
+ c = toAscii(enc, ptr, end);
+ }
+ if (c != ASCII_QUOT && c != ASCII_APOS) {
+ *nextTokPtr = ptr;
+ return 0;
+ }
+ open = c;
+ ptr += enc->minBytesPerChar;
+ *valPtr = ptr;
+ for (;; ptr += enc->minBytesPerChar) {
+ c = toAscii(enc, ptr, end);
+ if (c == open)
+ break;
+ if (!(ASCII_a <= c && c <= ASCII_z)
+ && !(ASCII_A <= c && c <= ASCII_Z)
+ && !(ASCII_0 <= c && c <= ASCII_9)
+ && c != ASCII_PERIOD
+ && c != ASCII_MINUS
+ && c != ASCII_UNDERSCORE) {
+ *nextTokPtr = ptr;
+ return 0;
+ }
+ }
+ *nextTokPtr = ptr + enc->minBytesPerChar;
+ return 1;
+}
+
+static const char KW_version[] = {
+ ASCII_v, ASCII_e, ASCII_r, ASCII_s, ASCII_i, ASCII_o, ASCII_n, '\0'
+};
+
+static const char KW_encoding[] = {
+ ASCII_e, ASCII_n, ASCII_c, ASCII_o, ASCII_d, ASCII_i, ASCII_n, ASCII_g, '\0'
+};
+
+static const char KW_standalone[] = {
+ ASCII_s, ASCII_t, ASCII_a, ASCII_n, ASCII_d, ASCII_a, ASCII_l, ASCII_o, ASCII_n, ASCII_e, '\0'
+};
+
+static const char KW_yes[] = {
+ ASCII_y, ASCII_e, ASCII_s, '\0'
+};
+
+static const char KW_no[] = {
+ ASCII_n, ASCII_o, '\0'
+};
+
+static
+int doParseXmlDecl(const ENCODING *(*encodingFinder)(const ENCODING *,
+ const char *,
+ const char *),
+ int isGeneralTextEntity,
+ const ENCODING *enc,
+ const char *ptr,
+ const char *end,
+ const char **badPtr,
+ const char **versionPtr,
+ const char **encodingName,
+ const ENCODING **encoding,
+ int *standalone)
+{
+ const char *val = 0;
+ const char *name = 0;
+ const char *nameEnd = 0;
+ ptr += 5 * enc->minBytesPerChar;
+ end -= 2 * enc->minBytesPerChar;
+ if (!parsePseudoAttribute(enc, ptr, end, &name, &nameEnd, &val, &ptr) || !name) {
+ *badPtr = ptr;
+ return 0;
+ }
+ if (!XmlNameMatchesAscii(enc, name, nameEnd, KW_version)) {
+ if (!isGeneralTextEntity) {
+ *badPtr = name;
+ return 0;
+ }
+ }
+ else {
+ if (versionPtr)
+ *versionPtr = val;
+ if (!parsePseudoAttribute(enc, ptr, end, &name, &nameEnd, &val, &ptr)) {
+ *badPtr = ptr;
+ return 0;
+ }
+ if (!name) {
+ if (isGeneralTextEntity) {
+ /* a TextDecl must have an EncodingDecl */
+ *badPtr = ptr;
+ return 0;
+ }
+ return 1;
+ }
+ }
+ if (XmlNameMatchesAscii(enc, name, nameEnd, KW_encoding)) {
+ int c = toAscii(enc, val, end);
+ if (!(ASCII_a <= c && c <= ASCII_z) && !(ASCII_A <= c && c <= ASCII_Z)) {
+ *badPtr = val;
+ return 0;
+ }
+ if (encodingName)
+ *encodingName = val;
+ if (encoding)
+ *encoding = encodingFinder(enc, val, ptr - enc->minBytesPerChar);
+ if (!parsePseudoAttribute(enc, ptr, end, &name, &nameEnd, &val, &ptr)) {
+ *badPtr = ptr;
+ return 0;
+ }
+ if (!name)
+ return 1;
+ }
+ if (!XmlNameMatchesAscii(enc, name, nameEnd, KW_standalone) || isGeneralTextEntity) {
+ *badPtr = name;
+ return 0;
+ }
+ if (XmlNameMatchesAscii(enc, val, ptr - enc->minBytesPerChar, KW_yes)) {
+ if (standalone)
+ *standalone = 1;
+ }
+ else if (XmlNameMatchesAscii(enc, val, ptr - enc->minBytesPerChar, KW_no)) {
+ if (standalone)
+ *standalone = 0;
+ }
+ else {
+ *badPtr = val;
+ return 0;
+ }
+ while (isSpace(toAscii(enc, ptr, end)))
+ ptr += enc->minBytesPerChar;
+ if (ptr != end) {
+ *badPtr = ptr;
+ return 0;
+ }
+ return 1;
+}
+
+static
+int checkCharRefNumber(int result)
+{
+ switch (result >> 8) {
+ case 0xD8: case 0xD9: case 0xDA: case 0xDB:
+ case 0xDC: case 0xDD: case 0xDE: case 0xDF:
+ return -1;
+ case 0:
+ if (latin1_encoding.type[result] == BT_NONXML)
+ return -1;
+ break;
+ case 0xFF:
+ if (result == 0xFFFE || result == 0xFFFF)
+ return -1;
+ break;
+ }
+ return result;
+}
+
+int XmlUtf8Encode(int c, char *buf)
+{
+ enum {
+ /* minN is minimum legal resulting value for N byte sequence */
+ min2 = 0x80,
+ min3 = 0x800,
+ min4 = 0x10000
+ };
+
+ if (c < 0)
+ return 0;
+ if (c < min2) {
+ buf[0] = (c | UTF8_cval1);
+ return 1;
+ }
+ if (c < min3) {
+ buf[0] = ((c >> 6) | UTF8_cval2);
+ buf[1] = ((c & 0x3f) | 0x80);
+ return 2;
+ }
+ if (c < min4) {
+ buf[0] = ((c >> 12) | UTF8_cval3);
+ buf[1] = (((c >> 6) & 0x3f) | 0x80);
+ buf[2] = ((c & 0x3f) | 0x80);
+ return 3;
+ }
+ if (c < 0x110000) {
+ buf[0] = ((c >> 18) | UTF8_cval4);
+ buf[1] = (((c >> 12) & 0x3f) | 0x80);
+ buf[2] = (((c >> 6) & 0x3f) | 0x80);
+ buf[3] = ((c & 0x3f) | 0x80);
+ return 4;
+ }
+ return 0;
+}
+
+int XmlUtf16Encode(int charNum, unsigned short *buf)
+{
+ if (charNum < 0)
+ return 0;
+ if (charNum < 0x10000) {
+ buf[0] = charNum;
+ return 1;
+ }
+ if (charNum < 0x110000) {
+ charNum -= 0x10000;
+ buf[0] = (charNum >> 10) + 0xD800;
+ buf[1] = (charNum & 0x3FF) + 0xDC00;
+ return 2;
+ }
+ return 0;
+}
+
+struct unknown_encoding {
+ struct normal_encoding normal;
+ int (*convert)(void *userData, const char *p);
+ void *userData;
+ unsigned short utf16[256];
+ char utf8[256][4];
+};
+
+int XmlSizeOfUnknownEncoding(void)
+{
+ return sizeof(struct unknown_encoding);
+}
+
+static
+int unknown_isName(const ENCODING *enc, const char *p)
+{
+ int c = ((const struct unknown_encoding *)enc)
+ ->convert(((const struct unknown_encoding *)enc)->userData, p);
+ if (c & ~0xFFFF)
+ return 0;
+ return UCS2_GET_NAMING(namePages, c >> 8, c & 0xFF);
+}
+
+static
+int unknown_isNmstrt(const ENCODING *enc, const char *p)
+{
+ int c = ((const struct unknown_encoding *)enc)
+ ->convert(((const struct unknown_encoding *)enc)->userData, p);
+ if (c & ~0xFFFF)
+ return 0;
+ return UCS2_GET_NAMING(nmstrtPages, c >> 8, c & 0xFF);
+}
+
+static
+int unknown_isInvalid(const ENCODING *enc, const char *p)
+{
+ int c = ((const struct unknown_encoding *)enc)
+ ->convert(((const struct unknown_encoding *)enc)->userData, p);
+ return (c & ~0xFFFF) || checkCharRefNumber(c) < 0;
+}
+
+static
+void unknown_toUtf8(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ char **toP, const char *toLim)
+{
+ char buf[XML_UTF8_ENCODE_MAX];
+ for (;;) {
+ const char *utf8;
+ int n;
+ if (*fromP == fromLim)
+ break;
+ utf8 = ((const struct unknown_encoding *)enc)->utf8[(unsigned char)**fromP];
+ n = *utf8++;
+ if (n == 0) {
+ int c = ((const struct unknown_encoding *)enc)
+ ->convert(((const struct unknown_encoding *)enc)->userData, *fromP);
+ n = XmlUtf8Encode(c, buf);
+ if (n > toLim - *toP)
+ break;
+ utf8 = buf;
+ *fromP += ((const struct normal_encoding *)enc)->type[(unsigned char)**fromP]
+ - (BT_LEAD2 - 2);
+ }
+ else {
+ if (n > toLim - *toP)
+ break;
+ (*fromP)++;
+ }
+ do {
+ *(*toP)++ = *utf8++;
+ } while (--n != 0);
+ }
+}
+
+static
+void unknown_toUtf16(const ENCODING *enc,
+ const char **fromP, const char *fromLim,
+ unsigned short **toP, const unsigned short *toLim)
+{
+ while (*fromP != fromLim && *toP != toLim) {
+ unsigned short c
+ = ((const struct unknown_encoding *)enc)->utf16[(unsigned char)**fromP];
+ if (c == 0) {
+ c = (unsigned short)((const struct unknown_encoding *)enc)
+ ->convert(((const struct unknown_encoding *)enc)->userData, *fromP);
+ *fromP += ((const struct normal_encoding *)enc)->type[(unsigned char)**fromP]
+ - (BT_LEAD2 - 2);
+ }
+ else
+ (*fromP)++;
+ *(*toP)++ = c;
+ }
+}
+
+ENCODING *
+XmlInitUnknownEncoding(void *mem,
+ int *table,
+ int (*convert)(void *userData, const char *p),
+ void *userData)
+{
+ int i;
+ struct unknown_encoding *e = mem;
+ for (i = 0; i < (int)sizeof(struct normal_encoding); i++)
+ ((char *)mem)[i] = ((char *)&latin1_encoding)[i];
+ for (i = 0; i < 128; i++)
+ if (latin1_encoding.type[i] != BT_OTHER
+ && latin1_encoding.type[i] != BT_NONXML
+ && table[i] != i)
+ return 0;
+ for (i = 0; i < 256; i++) {
+ int c = table[i];
+ if (c == -1) {
+ e->normal.type[i] = BT_MALFORM;
+ /* This shouldn't really get used. */
+ e->utf16[i] = 0xFFFF;
+ e->utf8[i][0] = 1;
+ e->utf8[i][1] = 0;
+ }
+ else if (c < 0) {
+ if (c < -4)
+ return 0;
+ e->normal.type[i] = BT_LEAD2 - (c + 2);
+ e->utf8[i][0] = 0;
+ e->utf16[i] = 0;
+ }
+ else if (c < 0x80) {
+ if (latin1_encoding.type[c] != BT_OTHER
+ && latin1_encoding.type[c] != BT_NONXML
+ && c != i)
+ return 0;
+ e->normal.type[i] = latin1_encoding.type[c];
+ e->utf8[i][0] = 1;
+ e->utf8[i][1] = (char)c;
+ e->utf16[i] = c == 0 ? 0xFFFF : c;
+ }
+ else if (checkCharRefNumber(c) < 0) {
+ e->normal.type[i] = BT_NONXML;
+ /* This shouldn't really get used. */
+ e->utf16[i] = 0xFFFF;
+ e->utf8[i][0] = 1;
+ e->utf8[i][1] = 0;
+ }
+ else {
+ if (c > 0xFFFF)
+ return 0;
+ if (UCS2_GET_NAMING(nmstrtPages, c >> 8, c & 0xff))
+ e->normal.type[i] = BT_NMSTRT;
+ else if (UCS2_GET_NAMING(namePages, c >> 8, c & 0xff))
+ e->normal.type[i] = BT_NAME;
+ else
+ e->normal.type[i] = BT_OTHER;
+ e->utf8[i][0] = (char)XmlUtf8Encode(c, e->utf8[i] + 1);
+ e->utf16[i] = c;
+ }
+ }
+ e->userData = userData;
+ e->convert = convert;
+ if (convert) {
+ e->normal.isName2 = unknown_isName;
+ e->normal.isName3 = unknown_isName;
+ e->normal.isName4 = unknown_isName;
+ e->normal.isNmstrt2 = unknown_isNmstrt;
+ e->normal.isNmstrt3 = unknown_isNmstrt;
+ e->normal.isNmstrt4 = unknown_isNmstrt;
+ e->normal.isInvalid2 = unknown_isInvalid;
+ e->normal.isInvalid3 = unknown_isInvalid;
+ e->normal.isInvalid4 = unknown_isInvalid;
+ }
+ e->normal.enc.utf8Convert = unknown_toUtf8;
+ e->normal.enc.utf16Convert = unknown_toUtf16;
+ return &(e->normal.enc);
+}
+
+/* If this enumeration is changed, getEncodingIndex and encodings
+must also be changed. */
+enum {
+ UNKNOWN_ENC = -1,
+ ISO_8859_1_ENC = 0,
+ US_ASCII_ENC,
+ UTF_8_ENC,
+ UTF_16_ENC,
+ UTF_16BE_ENC,
+ UTF_16LE_ENC,
+ /* must match encodingNames up to here */
+ NO_ENC
+};
+
+static const char KW_ISO_8859_1[] = {
+ ASCII_I, ASCII_S, ASCII_O, ASCII_MINUS, ASCII_8, ASCII_8, ASCII_5, ASCII_9, ASCII_MINUS, ASCII_1, '\0'
+};
+static const char KW_US_ASCII[] = {
+ ASCII_U, ASCII_S, ASCII_MINUS, ASCII_A, ASCII_S, ASCII_C, ASCII_I, ASCII_I, '\0'
+};
+static const char KW_UTF_8[] = {
+ ASCII_U, ASCII_T, ASCII_F, ASCII_MINUS, ASCII_8, '\0'
+};
+static const char KW_UTF_16[] = {
+ ASCII_U, ASCII_T, ASCII_F, ASCII_MINUS, ASCII_1, ASCII_6, '\0'
+};
+static const char KW_UTF_16BE[] = {
+ ASCII_U, ASCII_T, ASCII_F, ASCII_MINUS, ASCII_1, ASCII_6, ASCII_B, ASCII_E, '\0'
+};
+static const char KW_UTF_16LE[] = {
+ ASCII_U, ASCII_T, ASCII_F, ASCII_MINUS, ASCII_1, ASCII_6, ASCII_L, ASCII_E, '\0'
+};
+
+static
+int getEncodingIndex(const char *name)
+{
+ static const char *encodingNames[] = {
+ KW_ISO_8859_1,
+ KW_US_ASCII,
+ KW_UTF_8,
+ KW_UTF_16,
+ KW_UTF_16BE,
+ KW_UTF_16LE,
+ };
+ int i;
+ if (name == 0)
+ return NO_ENC;
+ for (i = 0; i < (int)(sizeof(encodingNames)/sizeof(encodingNames[0])); i++)
+ if (streqci(name, encodingNames[i]))
+ return i;
+ return UNKNOWN_ENC;
+}
+
+/* For binary compatibility, we store the index of the encoding specified
+at initialization in the isUtf16 member. */
+
+#define INIT_ENC_INDEX(enc) ((int)(enc)->initEnc.isUtf16)
+#define SET_INIT_ENC_INDEX(enc, i) ((enc)->initEnc.isUtf16 = (char)i)
+
+/* This is what detects the encoding.
+encodingTable maps from encoding indices to encodings;
+INIT_ENC_INDEX(enc) is the index of the external (protocol) specified encoding;
+state is XML_CONTENT_STATE if we're parsing an external text entity,
+and XML_PROLOG_STATE otherwise.
+*/
+
+
+static
+int initScan(const ENCODING **encodingTable,
+ const INIT_ENCODING *enc,
+ int state,
+ const char *ptr,
+ const char *end,
+ const char **nextTokPtr)
+{
+ const ENCODING **encPtr;
+
+ if (ptr == end)
+ return XML_TOK_NONE;
+ encPtr = enc->encPtr;
+ if (ptr + 1 == end) {
+ /* only a single byte available for auto-detection */
+#ifndef XML_DTD /* FIXME */
+ /* a well-formed document entity must have more than one byte */
+ if (state != XML_CONTENT_STATE)
+ return XML_TOK_PARTIAL;
+#endif
+ /* so we're parsing an external text entity... */
+ /* if UTF-16 was externally specified, then we need at least 2 bytes */
+ switch (INIT_ENC_INDEX(enc)) {
+ case UTF_16_ENC:
+ case UTF_16LE_ENC:
+ case UTF_16BE_ENC:
+ return XML_TOK_PARTIAL;
+ }
+ switch ((unsigned char)*ptr) {
+ case 0xFE:
+ case 0xFF:
+ case 0xEF: /* possibly first byte of UTF-8 BOM */
+ if (INIT_ENC_INDEX(enc) == ISO_8859_1_ENC
+ && state == XML_CONTENT_STATE)
+ break;
+ /* fall through */
+ case 0x00:
+ case 0x3C:
+ return XML_TOK_PARTIAL;
+ }
+ }
+ else {
+ switch (((unsigned char)ptr[0] << 8) | (unsigned char)ptr[1]) {
+ case 0xFEFF:
+ if (INIT_ENC_INDEX(enc) == ISO_8859_1_ENC
+ && state == XML_CONTENT_STATE)
+ break;
+ *nextTokPtr = ptr + 2;
+ *encPtr = encodingTable[UTF_16BE_ENC];
+ return XML_TOK_BOM;
+ /* 00 3C is handled in the default case */
+ case 0x3C00:
+ if ((INIT_ENC_INDEX(enc) == UTF_16BE_ENC
+ || INIT_ENC_INDEX(enc) == UTF_16_ENC)
+ && state == XML_CONTENT_STATE)
+ break;
+ *encPtr = encodingTable[UTF_16LE_ENC];
+ return XmlTok(*encPtr, state, ptr, end, nextTokPtr);
+ case 0xFFFE:
+ if (INIT_ENC_INDEX(enc) == ISO_8859_1_ENC
+ && state == XML_CONTENT_STATE)
+ break;
+ *nextTokPtr = ptr + 2;
+ *encPtr = encodingTable[UTF_16LE_ENC];
+ return XML_TOK_BOM;
+ case 0xEFBB:
+ /* Maybe a UTF-8 BOM (EF BB BF) */
+ /* If there's an explicitly specified (external) encoding
+ of ISO-8859-1 or some flavour of UTF-16
+ and this is an external text entity,
+ don't look for the BOM,
+ because it might be a legal data. */
+ if (state == XML_CONTENT_STATE) {
+ int e = INIT_ENC_INDEX(enc);
+ if (e == ISO_8859_1_ENC || e == UTF_16BE_ENC || e == UTF_16LE_ENC || e == UTF_16_ENC)
+ break;
+ }
+ if (ptr + 2 == end)
+ return XML_TOK_PARTIAL;
+ if ((unsigned char)ptr[2] == 0xBF) {
+ *encPtr = encodingTable[UTF_8_ENC];
+ return XML_TOK_BOM;
+ }
+ break;
+ default:
+ if (ptr[0] == '\0') {
+ /* 0 isn't a legal data character. Furthermore a document entity can only
+ start with ASCII characters. So the only way this can fail to be big-endian
+ UTF-16 if it it's an external parsed general entity that's labelled as
+ UTF-16LE. */
+ if (state == XML_CONTENT_STATE && INIT_ENC_INDEX(enc) == UTF_16LE_ENC)
+ break;
+ *encPtr = encodingTable[UTF_16BE_ENC];
+ return XmlTok(*encPtr, state, ptr, end, nextTokPtr);
+ }
+ else if (ptr[1] == '\0') {
+ /* We could recover here in the case:
+ - parsing an external entity
+ - second byte is 0
+ - no externally specified encoding
+ - no encoding declaration
+ by assuming UTF-16LE. But we don't, because this would mean when
+ presented just with a single byte, we couldn't reliably determine
+ whether we needed further bytes. */
+ if (state == XML_CONTENT_STATE)
+ break;
+ *encPtr = encodingTable[UTF_16LE_ENC];
+ return XmlTok(*encPtr, state, ptr, end, nextTokPtr);
+ }
+ break;
+ }
+ }
+ *encPtr = encodingTable[INIT_ENC_INDEX(enc)];
+ return XmlTok(*encPtr, state, ptr, end, nextTokPtr);
+}
+
+
+#define NS(x) x
+#define ns(x) x
+#include "xmltok_ns.c"
+#undef NS
+#undef ns
+
+#ifdef XML_NS
+
+#define NS(x) x ## NS
+#define ns(x) x ## _ns
+
+#include "xmltok_ns.c"
+
+#undef NS
+#undef ns
+
+ENCODING *
+XmlInitUnknownEncodingNS(void *mem,
+ int *table,
+ int (*convert)(void *userData, const char *p),
+ void *userData)
+{
+ ENCODING *enc = XmlInitUnknownEncoding(mem, table, convert, userData);
+ if (enc)
+ ((struct normal_encoding *)enc)->type[ASCII_COLON] = BT_COLON;
+ return enc;
+}
+
+#endif /* XML_NS */
diff --git a/expat/xmltok/xmltok.h b/expat/lib/xmltok.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/xmltok.h
rename to expat/lib/xmltok.h
diff --git a/expat/xmltok/xmltok_impl.c b/expat/lib/xmltok_impl.c
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/xmltok_impl.c
rename to expat/lib/xmltok_impl.c
diff --git a/expat/xmltok/xmltok_impl.h b/expat/lib/xmltok_impl.h
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/xmltok_impl.h
rename to expat/lib/xmltok_impl.h
diff --git a/expat/xmltok/xmltok_ns.c b/expat/lib/xmltok_ns.c
old mode 100755
new mode 100644
similarity index 100%
rename from expat/xmltok/xmltok_ns.c
rename to expat/lib/xmltok_ns.c
diff --git a/expat/makedist.bat b/expat/makedist.bat
deleted file mode 100755
index 2160208..0000000
--- a/expat/makedist.bat
+++ /dev/null
@@ -1,7 +0,0 @@
-xcopy /y xmltok\Release\xmltok.lib lib
-xcopy /y xmlparse\Release\xmlparse.lib lib
-rm -f expat.zip
-cd ..
-sed -e 's;^^;expat/;' expat\files.txt | zip -qr expat\expat.zip -@ -ll
-sed -e 's;^^;expat/;' expat\win32files.txt | zip -qr expat\expat.zip -@
-cd expat
diff --git a/expat/win32files.txt b/expat/win32files.txt
deleted file mode 100755
index 7384aa1..0000000
--- a/expat/win32files.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-expat.dsw
-gennmtab/gennmtab.dsp
-sample/build.bat
-xmlparse/xmlparse.dsp
-xmltok/xmltok.dsp
-xmlwf/xmlwf.dsp
-bin/xmltok.dll
-bin/xmlparse.dll
-bin/xmlwf.exe
-lib/xmltok.lib
-lib/xmlparse.lib
diff --git a/expat/xmlec/xmlec.c b/expat/xmlec/xmlec.c
deleted file mode 100755
index c765774..0000000
--- a/expat/xmlec/xmlec.c
+++ /dev/null
@@ -1,191 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <fcntl.h>
-
-#ifdef _MSC_VER
-#define XMLTOKAPI __declspec(dllimport)
-#endif
-#include "xmltok.h"
-
-#ifndef O_BINARY
-#ifdef _O_BINARY
-#define O_BINARY _O_BINARY
-#else
-#define O_BINARY 0
-#endif
-#endif
-
-static void outOfMemory();
-
-struct XmlTokBuffer {
- char *buf;
- char *end;
- const char *ptr;
- size_t size;
- int fd;
- int state;
- int eof;
- unsigned long endOffset;
- const ENCODING *enc;
- INIT_ENCODING initEnc;
-};
-
-#define XmlTokBufferOffset(tb) ((tb)->endOffset - ((tb)->end - (tb)->ptr))
-#define READSIZE 1024
-
-void XmlTokBufferInit(struct XmlTokBuffer *tb, int fd)
-{
- tb->buf = malloc(READSIZE);
- if (!tb->buf)
- outOfMemory();
- tb->end = tb->buf;
- tb->ptr = tb->buf;
- tb->size = READSIZE;
- tb->fd = fd;
- tb->state = XML_PROLOG_STATE;
- tb->eof = 0;
- tb->endOffset = 0;
- XmlInitEncoding(&(tb->initEnc), &(tb->enc));
-}
-
-void XmlTokBufferFree(struct XmlTokBuffer *tb)
-{
- free(tb->buf);
-}
-
-int XmlGetToken(struct XmlTokBuffer *tb, const char **tokStart, size_t *tokLength)
-{
- int tok;
- for (;;) {
- int nBytes;
- const char *start = tb->ptr;
- tok = XmlTok(tb->enc, tb->state, start, tb->end, &tb->ptr);
- if (tok >= 0) {
- if (tok == XML_TOK_INSTANCE_START)
- tb->state = XML_CONTENT_STATE;
- *tokStart = start;
- *tokLength = tb->ptr - start;
- break;
- }
- if (tb->eof)
- break;
- /* Read in multiples of READSIZE, unless read() has previously
- less than it could. */
- if (tb->end == tb->buf + tb->size) {
- size_t keep = tb->end - tb->ptr;
- if (keep == 0)
- tb->ptr = tb->end = tb->buf;
- else if (keep + READSIZE <= tb->size) {
- unsigned nBlocks = (tb->size - keep)/READSIZE;
- char *newEnd = tb->buf + tb->size - (nBlocks * READSIZE);
- memmove(newEnd - keep, tb->ptr, keep);
- tb->end = newEnd;
- tb->ptr = newEnd - keep;
- }
- else {
- char *newBuf, *newEnd;
- tb->size += READSIZE;
- newBuf = malloc(tb->size);
- if (!newBuf)
- outOfMemory();
- newEnd = newBuf + tb->size - READSIZE;
- memcpy(newEnd - keep, tb->ptr, keep);
- free(tb->buf);
- tb->buf = newBuf;
- tb->end = newEnd;
- tb->ptr = newEnd - keep;
- }
- }
- nBytes = read(tb->fd, tb->end, (tb->buf + tb->size) - tb->end);
- if (nBytes == 0) {
- tb->eof = 1;
- break;
- }
- if (nBytes < 0)
- return XML_TOK_NONE;
- tb->end += nBytes;
- tb->endOffset += nBytes;
- }
- return tok;
-}
-
-int doFile(const char *filename)
-{
- unsigned nElements = 0;
- struct XmlTokBuffer buf;
- int fd = open(filename, O_RDONLY|O_BINARY);
-
- if (fd < 0) {
- fprintf(stderr, "%s: cannot open\n", filename);
- return 0;
- }
- XmlTokBufferInit(&buf, fd);
- for (;;) {
- const char *tokStr;
- size_t tokLen;
- int tok = XmlGetToken(&buf, &tokStr, &tokLen);
- switch (tok) {
- case XML_TOK_NONE:
- if (nElements == 0) {
- fprintf(stderr, "%s: no instance\n", filename);
- return 0;
- }
- printf("%8u %s\n", nElements, filename);
- close(fd);
- XmlTokBufferFree(&buf);
- return 1;
- case XML_TOK_INVALID:
- fprintf(stderr, "%s: well-formedness error at byte %lu\n",
- filename, XmlTokBufferOffset(&buf));
-
- close(fd);
- XmlTokBufferFree(&buf);
- return 0;
- case XML_TOK_PARTIAL_CHAR:
- fprintf(stderr, "%s: unclosed token with partial character started at byte %lu\n",
- filename, XmlTokBufferOffset(&buf));
- close(fd);
- XmlTokBufferFree(&buf);
- return 0;
- case XML_TOK_PARTIAL:
- fprintf(stderr, "%s: unclosed token started at byte %lu\n",
- filename, XmlTokBufferOffset(&buf));
- close(fd);
- XmlTokBufferFree(&buf);
- return 0;
- case XML_TOK_START_TAG_WITH_ATTS:
- case XML_TOK_EMPTY_ELEMENT_WITH_ATTS:
- case XML_TOK_START_TAG_NO_ATTS:
- case XML_TOK_EMPTY_ELEMENT_NO_ATTS:
- nElements++;
- break;
- default:
- break;
- }
- }
-
-}
-
-int main(int argc, char **argv)
-{
- int i;
- int ret = 0;
- if (argc == 1) {
- fprintf(stderr, "usage: %s filename ...\n", argv[0]);
- return 1;
- }
- for (i = 1; i < argc; i++)
- if (!doFile(argv[i]))
- ret = 1;
- return ret;
-}
-
-static
-void outOfMemory()
-{
- fprintf(stderr, "out of memory\n");
- exit(1);
-}
-
diff --git a/expat/xmlwf/Makefile.in b/expat/xmlwf/Makefile.in
new file mode 100644
index 0000000..21ccdf9
--- /dev/null
+++ b/expat/xmlwf/Makefile.in
@@ -0,0 +1,12 @@
+LIBDIR= ../lib/.libs
+INCDIR= ../lib
+
+LDFLAGS= @LDFLAGS@
+CFLAGS= @CFLAGS@ -I$(INCDIR)
+
+FILEMAP_OBJ= @FILEMAP_OBJ@
+OBJS= xmlwf.o xmlfile.o codepage.o $(FILEMAP_OBJ)
+LIBS= -L$(LIBDIR) -lexpat
+
+xmlwf: $(OBJS)
+ $(CC) -o xmlwf $(LDFLAGS) $(OBJS) $(LIBS)@
diff --git a/expat/xmlwf/xmlfile.c b/expat/xmlwf/xmlfile.c
index 6f79107..eae9020 100755
--- a/expat/xmlwf/xmlfile.c
+++ b/expat/xmlwf/xmlfile.c
@@ -8,7 +8,7 @@
#include <stddef.h>
#include <string.h>
#include <fcntl.h>
-#include "xmlparse.h"
+#include "expat.h"
#include "xmlfile.h"
#include "xmltchar.h"
#include "filemap.h"
diff --git a/expat/xmlwf/xmlwf.c b/expat/xmlwf/xmlwf.c
index 2b8fe12..ccb9dec 100755
--- a/expat/xmlwf/xmlwf.c
+++ b/expat/xmlwf/xmlwf.c
@@ -8,7 +8,7 @@
#include <stddef.h>
#include <string.h>
-#include "xmlparse.h"
+#include "expat.h"
#include "codepage.h"
#include "xmlfile.h"
#include "xmltchar.h"
