blob: e74777fbc6f42def3e358e4d0b9959ba53338f6d [file] [log] [blame]
/** @file
Timer Architectural Protocol module using High Precision Event Timer (HPET)
Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include <PiDxe.h>
#include <Protocol/Cpu.h>
#include <Protocol/Timer.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/LocalApicLib.h>
#include <Library/IoApicLib.h>
#include <Register/LocalApic.h>
#include <Register/IoApic.h>
#include <Register/Hpet.h>
///
/// Define value for an invalid HPET Timer index.
///
#define HPET_INVALID_TIMER_INDEX 0xff
///
/// Timer Architectural Protocol function prototypes.
///
/**
This function registers the handler NotifyFunction so it is called every time
the timer interrupt fires. It also passes the amount of time since the last
handler call to the NotifyFunction. If NotifyFunction is NULL, then the
handler is unregistered. If the handler is registered, then EFI_SUCCESS is
returned. If the CPU does not support registering a timer interrupt handler,
then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
when a handler is already registered, then EFI_ALREADY_STARTED is returned.
If an attempt is made to unregister a handler when a handler is not registered,
then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
is returned.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@param NotifyFunction The function to call when a timer interrupt fires.
This function executes at TPL_HIGH_LEVEL. The DXE
Core will register a handler for the timer interrupt,
so it can know how much time has passed. This
information is used to signal timer based events.
NULL will unregister the handler.
@retval EFI_SUCCESS The timer handler was registered.
@retval EFI_UNSUPPORTED The platform does not support timer interrupts.
@retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
registered.
@retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
previously registered.
@retval EFI_DEVICE_ERROR The timer handler could not be registered.
**/
EFI_STATUS
EFIAPI
TimerDriverRegisterHandler (
IN EFI_TIMER_ARCH_PROTOCOL *This,
IN EFI_TIMER_NOTIFY NotifyFunction
);
/**
This function adjusts the period of timer interrupts to the value specified
by TimerPeriod. If the timer period is updated, then the selected timer
period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
If an error occurs while attempting to update the timer period, then the
timer hardware will be put back in its state prior to this call, and
EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
is disabled. This is not the same as disabling the CPU's interrupts.
Instead, it must either turn off the timer hardware, or it must adjust the
interrupt controller so that a CPU interrupt is not generated when the timer
interrupt fires.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@param TimerPeriod The rate to program the timer interrupt in 100 nS units.
If the timer hardware is not programmable, then
EFI_UNSUPPORTED is returned. If the timer is programmable,
then the timer period will be rounded up to the nearest
timer period that is supported by the timer hardware.
If TimerPeriod is set to 0, then the timer interrupts
will be disabled.
@retval EFI_SUCCESS The timer period was changed.
@retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
@retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
**/
EFI_STATUS
EFIAPI
TimerDriverSetTimerPeriod (
IN EFI_TIMER_ARCH_PROTOCOL *This,
IN UINT64 TimerPeriod
);
/**
This function retrieves the period of timer interrupts in 100 ns units,
returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
returned, then the timer is currently disabled.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@param TimerPeriod A pointer to the timer period to retrieve in 100 ns units.
If 0 is returned, then the timer is currently disabled.
@retval EFI_SUCCESS The timer period was returned in TimerPeriod.
@retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
**/
EFI_STATUS
EFIAPI
TimerDriverGetTimerPeriod (
IN EFI_TIMER_ARCH_PROTOCOL *This,
OUT UINT64 *TimerPeriod
);
/**
This function generates a soft timer interrupt. If the platform does not support soft
timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
service, then a soft timer interrupt will be generated. If the timer interrupt is
enabled when this service is called, then the registered handler will be invoked. The
registered handler should not be able to distinguish a hardware-generated timer
interrupt from a software-generated timer interrupt.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@retval EFI_SUCCESS The soft timer interrupt was generated.
@retval EFI_UNSUPPORTED The platform does not support the generation of soft
timer interrupts.
**/
EFI_STATUS
EFIAPI
TimerDriverGenerateSoftInterrupt (
IN EFI_TIMER_ARCH_PROTOCOL *This
);
///
/// The handle onto which the Timer Architectural Protocol will be installed.
///
EFI_HANDLE mTimerHandle = NULL;
///
/// The Timer Architectural Protocol that this driver produces.
///
EFI_TIMER_ARCH_PROTOCOL mTimer = {
TimerDriverRegisterHandler,
TimerDriverSetTimerPeriod,
TimerDriverGetTimerPeriod,
TimerDriverGenerateSoftInterrupt
};
///
/// Pointer to the CPU Architectural Protocol instance.
///
EFI_CPU_ARCH_PROTOCOL *mCpu = NULL;
///
/// The notification function to call on every timer interrupt.
///
EFI_TIMER_NOTIFY mTimerNotifyFunction = NULL;
///
/// The current period of the HPET timer interrupt in 100 ns units.
///
UINT64 mTimerPeriod = 0;
///
/// The number of HPET timer ticks required for the current HPET rate specified by mTimerPeriod.
///
UINT64 mTimerCount;
///
/// Mask used for counter and comparator calculations to adjust for a 32-bit or 64-bit counter.
///
UINT64 mCounterMask;
///
/// The HPET main counter value from the most recent HPET timer interrupt.
///
volatile UINT64 mPreviousMainCounter;
volatile UINT64 mPreviousComparator;
///
/// The index of the HPET timer being managed by this driver.
///
UINTN mTimerIndex;
///
/// The I/O APIC IRQ that the HPET Timer is mapped if I/O APIC mode is used.
///
UINT32 mTimerIrq;
///
/// Cached state of the HPET General Capabilities register managed by this driver.
/// Caching the state reduces the number of times the configuration register is read.
///
HPET_GENERAL_CAPABILITIES_ID_REGISTER mHpetGeneralCapabilities;
///
/// Cached state of the HPET General Configuration register managed by this driver.
/// Caching the state reduces the number of times the configuration register is read.
///
HPET_GENERAL_CONFIGURATION_REGISTER mHpetGeneralConfiguration;
///
/// Cached state of the Configuration register for the HPET Timer managed by
/// this driver. Caching the state reduces the number of times the configuration
/// register is read.
///
HPET_TIMER_CONFIGURATION_REGISTER mTimerConfiguration;
///
/// Counts the number of HPET Timer interrupts processed by this driver.
/// Only required for debug.
///
volatile UINTN mNumTicks;
/**
Read a 64-bit register from the HPET
@param Offset Specifies the offset of the HPET register to read.
@return The 64-bit value read from the HPET register specified by Offset.
**/
UINT64
HpetRead (
IN UINTN Offset
)
{
return MmioRead64 (PcdGet32 (PcdHpetBaseAddress) + Offset);
}
/**
Write a 64-bit HPET register.
@param Offset Specifies the offset of the HPET register to write.
@param Value Specifies the value to write to the HPET register specified by Offset.
@return The 64-bit value written to HPET register specified by Offset.
**/
UINT64
HpetWrite (
IN UINTN Offset,
IN UINT64 Value
)
{
return MmioWrite64 (PcdGet32 (PcdHpetBaseAddress) + Offset, Value);
}
/**
Enable or disable the main counter in the HPET Timer.
@param Enable If TRUE, then enable the main counter in the HPET Timer.
If FALSE, then disable the main counter in the HPET Timer.
**/
VOID
HpetEnable (
IN BOOLEAN Enable
)
{
mHpetGeneralConfiguration.Bits.MainCounterEnable = Enable ? 1 : 0;
HpetWrite (HPET_GENERAL_CONFIGURATION_OFFSET, mHpetGeneralConfiguration.Uint64);
}
/**
The interrupt handler for the HPET timer. This handler clears the HPET interrupt
and computes the amount of time that has passed since the last HPET timer interrupt.
If a notification function is registered, then the amount of time since the last
HPET interrupt is passed to that notification function in 100 ns units. The HPET
time is updated to generate another interrupt in the required time period.
@param InterruptType The type of interrupt that occurred.
@param SystemContext A pointer to the system context when the interrupt occurred.
**/
VOID
EFIAPI
TimerInterruptHandler (
IN EFI_EXCEPTION_TYPE InterruptType,
IN EFI_SYSTEM_CONTEXT SystemContext
)
{
UINT64 MainCounter;
UINT64 Comparator;
UINT64 TimerPeriod;
UINT64 Delta;
//
// Count number of ticks
//
DEBUG_CODE (
mNumTicks++;
);
//
// Clear HPET timer interrupt status
//
HpetWrite (HPET_GENERAL_INTERRUPT_STATUS_OFFSET, LShiftU64 (1, mTimerIndex));
//
// Local APIC EOI
//
SendApicEoi ();
//
// Disable HPET timer when adjusting the COMPARATOR value to prevent a missed interrupt
//
HpetEnable (FALSE);
//
// Capture main counter value
//
MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
//
// Get the previous comparator counter
//
mPreviousComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
//
// Set HPET COMPARATOR to the value required for the next timer tick
//
Comparator = (mPreviousComparator + mTimerCount) & mCounterMask;
if ((mPreviousMainCounter < MainCounter) && (mPreviousComparator > Comparator)) {
//
// When comparator overflows
//
HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, Comparator);
} else if ((mPreviousMainCounter > MainCounter) && (mPreviousComparator < Comparator)) {
//
// When main counter overflows
//
HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + mTimerCount) & mCounterMask);
} else {
//
// When both main counter and comparator do not overflow or both do overflow
//
if (Comparator > MainCounter) {
HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, Comparator);
} else {
HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + mTimerCount) & mCounterMask);
}
}
//
// Enable the HPET counter once the new COMPARATOR value has been set.
//
HpetEnable (TRUE);
//
// Check to see if there is a registered notification function
//
if (mTimerNotifyFunction != NULL) {
//
// Compute time since last notification in 100 ns units (10 ^ -7)
//
if (MainCounter > mPreviousMainCounter) {
//
// Main counter does not overflow
//
Delta = MainCounter - mPreviousMainCounter;
} else {
//
// Main counter overflows, first usb, then add
//
Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
}
TimerPeriod = DivU64x32 (
MultU64x32 (
Delta & mCounterMask,
mHpetGeneralCapabilities.Bits.CounterClockPeriod
),
100000000
);
//
// Save main counter value before calling notification function
// that may enable interrupts and allow interrupt nesting.
//
mPreviousMainCounter = MainCounter;
//
// Call registered notification function passing in the time since the last
// interrupt in 100 ns units.
//
mTimerNotifyFunction (TimerPeriod);
return;
}
//
// Save main counter value
//
mPreviousMainCounter = MainCounter;
}
/**
This function registers the handler NotifyFunction so it is called every time
the timer interrupt fires. It also passes the amount of time since the last
handler call to the NotifyFunction. If NotifyFunction is NULL, then the
handler is unregistered. If the handler is registered, then EFI_SUCCESS is
returned. If the CPU does not support registering a timer interrupt handler,
then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
when a handler is already registered, then EFI_ALREADY_STARTED is returned.
If an attempt is made to unregister a handler when a handler is not registered,
then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
is returned.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@param NotifyFunction The function to call when a timer interrupt fires.
This function executes at TPL_HIGH_LEVEL. The DXE
Core will register a handler for the timer interrupt,
so it can know how much time has passed. This
information is used to signal timer based events.
NULL will unregister the handler.
@retval EFI_SUCCESS The timer handler was registered.
@retval EFI_UNSUPPORTED The platform does not support timer interrupts.
@retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
registered.
@retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
previously registered.
@retval EFI_DEVICE_ERROR The timer handler could not be registered.
**/
EFI_STATUS
EFIAPI
TimerDriverRegisterHandler (
IN EFI_TIMER_ARCH_PROTOCOL *This,
IN EFI_TIMER_NOTIFY NotifyFunction
)
{
//
// Check for invalid parameters
//
if ((NotifyFunction == NULL) && (mTimerNotifyFunction == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((NotifyFunction != NULL) && (mTimerNotifyFunction != NULL)) {
return EFI_ALREADY_STARTED;
}
//
// Cache the registered notification function
//
mTimerNotifyFunction = NotifyFunction;
return EFI_SUCCESS;
}
/**
This function adjusts the period of timer interrupts to the value specified
by TimerPeriod. If the timer period is updated, then the selected timer
period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
If an error occurs while attempting to update the timer period, then the
timer hardware will be put back in its state prior to this call, and
EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
is disabled. This is not the same as disabling the CPU's interrupts.
Instead, it must either turn off the timer hardware, or it must adjust the
interrupt controller so that a CPU interrupt is not generated when the timer
interrupt fires.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@param TimerPeriod The rate to program the timer interrupt in 100 nS units.
If the timer hardware is not programmable, then
EFI_UNSUPPORTED is returned. If the timer is programmable,
then the timer period will be rounded up to the nearest
timer period that is supported by the timer hardware.
If TimerPeriod is set to 0, then the timer interrupts
will be disabled.
@retval EFI_SUCCESS The timer period was changed.
@retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
@retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
**/
EFI_STATUS
EFIAPI
TimerDriverSetTimerPeriod (
IN EFI_TIMER_ARCH_PROTOCOL *This,
IN UINT64 TimerPeriod
)
{
EFI_TPL Tpl;
UINT64 MainCounter;
UINT64 Delta;
UINT64 CurrentComparator;
HPET_TIMER_MSI_ROUTE_REGISTER HpetTimerMsiRoute;
//
// Disable interrupts
//
Tpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
//
// Disable HPET timer when adjusting the timer period
//
HpetEnable (FALSE);
if (TimerPeriod == 0) {
if (mTimerPeriod != 0) {
//
// Check if there is possibly a pending interrupt
//
MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
if (MainCounter < mPreviousMainCounter) {
Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
} else {
Delta = MainCounter - mPreviousMainCounter;
}
if ((Delta & mCounterMask) >= mTimerCount) {
//
// Interrupt still happens after disable HPET, wait to be processed
// Wait until interrupt is processed and comparator is increased
//
CurrentComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
while (CurrentComparator == mPreviousComparator) {
CurrentComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
CpuPause ();
}
}
}
//
// If TimerPeriod is 0, then mask HPET Timer interrupts
//
if ((mTimerConfiguration.Bits.MsiInterruptCapability != 0) && FeaturePcdGet (PcdHpetMsiEnable)) {
//
// Disable HPET MSI interrupt generation
//
mTimerConfiguration.Bits.MsiInterruptEnable = 0;
} else {
//
// Disable I/O APIC Interrupt
//
IoApicEnableInterrupt (mTimerIrq, FALSE);
}
//
// Disable HPET timer interrupt
//
mTimerConfiguration.Bits.InterruptEnable = 0;
HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
} else {
//
// Convert TimerPeriod to femtoseconds and divide by the number if femtoseconds
// per tick of the HPET counter to determine the number of HPET counter ticks
// in TimerPeriod 100 ns units.
//
mTimerCount = DivU64x32 (
MultU64x32 (TimerPeriod, 100000000),
mHpetGeneralCapabilities.Bits.CounterClockPeriod
);
//
// Program the HPET Comparator with the number of ticks till the next interrupt
//
MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
if (MainCounter > mPreviousMainCounter) {
Delta = MainCounter - mPreviousMainCounter;
} else {
Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
}
if ((Delta & mCounterMask) >= mTimerCount) {
HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + 1) & mCounterMask);
} else {
HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (mPreviousMainCounter + mTimerCount) & mCounterMask);
}
//
// Enable HPET Timer interrupt generation
//
if ((mTimerConfiguration.Bits.MsiInterruptCapability != 0) && FeaturePcdGet (PcdHpetMsiEnable)) {
//
// Program MSI Address and MSI Data values in the selected HPET Timer
// Program HPET register with APIC ID of current BSP in case BSP has been switched
//
HpetTimerMsiRoute.Bits.Address = GetApicMsiAddress ();
HpetTimerMsiRoute.Bits.Value = (UINT32)GetApicMsiValue (PcdGet8 (PcdHpetLocalApicVector), LOCAL_APIC_DELIVERY_MODE_LOWEST_PRIORITY, FALSE, FALSE);
HpetWrite (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, HpetTimerMsiRoute.Uint64);
//
// Enable HPET MSI Interrupt
//
mTimerConfiguration.Bits.MsiInterruptEnable = 1;
} else {
//
// Enable timer interrupt through I/O APIC
// Program IOAPIC register with APIC ID of current BSP in case BSP has been switched
//
IoApicConfigureInterrupt (mTimerIrq, PcdGet8 (PcdHpetLocalApicVector), IO_APIC_DELIVERY_MODE_LOWEST_PRIORITY, TRUE, FALSE);
IoApicEnableInterrupt (mTimerIrq, TRUE);
}
//
// Enable HPET Interrupt Generation
//
mTimerConfiguration.Bits.InterruptEnable = 1;
HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
}
//
// Save the new timer period
//
mTimerPeriod = TimerPeriod;
//
// Enable the HPET counter once new timer period has been established
// The HPET counter should run even if the HPET Timer interrupts are
// disabled. This is used to account for time passed while the interrupt
// is disabled.
//
HpetEnable (TRUE);
//
// Restore interrupts
//
gBS->RestoreTPL (Tpl);
return EFI_SUCCESS;
}
/**
This function retrieves the period of timer interrupts in 100 ns units,
returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
returned, then the timer is currently disabled.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@param TimerPeriod A pointer to the timer period to retrieve in 100 ns units.
If 0 is returned, then the timer is currently disabled.
@retval EFI_SUCCESS The timer period was returned in TimerPeriod.
@retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
**/
EFI_STATUS
EFIAPI
TimerDriverGetTimerPeriod (
IN EFI_TIMER_ARCH_PROTOCOL *This,
OUT UINT64 *TimerPeriod
)
{
if (TimerPeriod == NULL) {
return EFI_INVALID_PARAMETER;
}
*TimerPeriod = mTimerPeriod;
return EFI_SUCCESS;
}
/**
This function generates a soft timer interrupt. If the platform does not support soft
timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
service, then a soft timer interrupt will be generated. If the timer interrupt is
enabled when this service is called, then the registered handler will be invoked. The
registered handler should not be able to distinguish a hardware-generated timer
interrupt from a software-generated timer interrupt.
@param This The EFI_TIMER_ARCH_PROTOCOL instance.
@retval EFI_SUCCESS The soft timer interrupt was generated.
@retval EFI_UNSUPPORTED The platform does not support the generation of soft
timer interrupts.
**/
EFI_STATUS
EFIAPI
TimerDriverGenerateSoftInterrupt (
IN EFI_TIMER_ARCH_PROTOCOL *This
)
{
UINT64 MainCounter;
EFI_TPL Tpl;
UINT64 TimerPeriod;
UINT64 Delta;
//
// Disable interrupts
//
Tpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
//
// Capture main counter value
//
MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
//
// Check to see if there is a registered notification function
//
if (mTimerNotifyFunction != NULL) {
//
// Compute time since last interrupt in 100 ns units (10 ^ -7)
//
if (MainCounter > mPreviousMainCounter) {
//
// Main counter does not overflow
//
Delta = MainCounter - mPreviousMainCounter;
} else {
//
// Main counter overflows, first usb, then add
//
Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
}
TimerPeriod = DivU64x32 (
MultU64x32 (
Delta & mCounterMask,
mHpetGeneralCapabilities.Bits.CounterClockPeriod
),
100000000
);
//
// Call registered notification function passing in the time since the last
// interrupt in 100 ns units.
//
mTimerNotifyFunction (TimerPeriod);
}
//
// Save main counter value
//
mPreviousMainCounter = MainCounter;
//
// Restore interrupts
//
gBS->RestoreTPL (Tpl);
return EFI_SUCCESS;
}
/**
Initialize the Timer Architectural Protocol driver
@param ImageHandle ImageHandle of the loaded driver
@param SystemTable Pointer to the System Table
@retval EFI_SUCCESS Timer Architectural Protocol created
@retval EFI_OUT_OF_RESOURCES Not enough resources available to initialize driver.
@retval EFI_DEVICE_ERROR A device error occurred attempting to initialize the driver.
**/
EFI_STATUS
EFIAPI
TimerDriverInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
UINTN TimerIndex;
UINTN MsiTimerIndex;
HPET_TIMER_MSI_ROUTE_REGISTER HpetTimerMsiRoute;
DEBUG ((DEBUG_INFO, "Init HPET Timer Driver\n"));
//
// Make sure the Timer Architectural Protocol is not already installed in the system
//
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiTimerArchProtocolGuid);
//
// Find the CPU architectural protocol.
//
Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&mCpu);
ASSERT_EFI_ERROR (Status);
//
// Retrieve HPET Capabilities and Configuration Information
//
mHpetGeneralCapabilities.Uint64 = HpetRead (HPET_GENERAL_CAPABILITIES_ID_OFFSET);
mHpetGeneralConfiguration.Uint64 = HpetRead (HPET_GENERAL_CONFIGURATION_OFFSET);
//
// If Revision is not valid, then ASSERT() and unload the driver because the HPET
// device is not present.
//
ASSERT (mHpetGeneralCapabilities.Uint64 != 0);
ASSERT (mHpetGeneralCapabilities.Uint64 != 0xFFFFFFFFFFFFFFFFULL);
if ((mHpetGeneralCapabilities.Uint64 == 0) || (mHpetGeneralCapabilities.Uint64 == 0xFFFFFFFFFFFFFFFFULL)) {
DEBUG ((DEBUG_ERROR, "HPET device is not present. Unload HPET driver.\n"));
return EFI_DEVICE_ERROR;
}
//
// Force the HPET timer to be disabled while setting everything up
//
HpetEnable (FALSE);
//
// Dump HPET Configuration Information
//
DEBUG_CODE_BEGIN ();
DEBUG ((DEBUG_INFO, "HPET Base Address = 0x%08x\n", PcdGet32 (PcdHpetBaseAddress)));
DEBUG ((DEBUG_INFO, " HPET_GENERAL_CAPABILITIES_ID = 0x%016lx\n", mHpetGeneralCapabilities));
DEBUG ((DEBUG_INFO, " HPET_GENERAL_CONFIGURATION = 0x%016lx\n", mHpetGeneralConfiguration.Uint64));
DEBUG ((DEBUG_INFO, " HPET_GENERAL_INTERRUPT_STATUS = 0x%016lx\n", HpetRead (HPET_GENERAL_INTERRUPT_STATUS_OFFSET)));
DEBUG ((DEBUG_INFO, " HPET_MAIN_COUNTER = 0x%016lx\n", HpetRead (HPET_MAIN_COUNTER_OFFSET)));
DEBUG ((DEBUG_INFO, " HPET Main Counter Period = %d (fs)\n", mHpetGeneralCapabilities.Bits.CounterClockPeriod));
for (TimerIndex = 0; TimerIndex <= mHpetGeneralCapabilities.Bits.NumberOfTimers; TimerIndex++) {
DEBUG ((DEBUG_INFO, " HPET_TIMER%d_CONFIGURATION = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
DEBUG ((DEBUG_INFO, " HPET_TIMER%d_COMPARATOR = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
DEBUG ((DEBUG_INFO, " HPET_TIMER%d_MSI_ROUTE = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
}
DEBUG_CODE_END ();
//
// Capture the current HPET main counter value.
//
mPreviousMainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
//
// Determine the interrupt mode to use for the HPET Timer.
// Look for MSI first, then unused PIC mode interrupt, then I/O APIC mode interrupt
//
MsiTimerIndex = HPET_INVALID_TIMER_INDEX;
mTimerIndex = HPET_INVALID_TIMER_INDEX;
for (TimerIndex = 0; TimerIndex <= mHpetGeneralCapabilities.Bits.NumberOfTimers; TimerIndex++) {
//
// Read the HPET Timer Capabilities and Configuration register
//
mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + TimerIndex * HPET_TIMER_STRIDE);
//
// Check to see if this HPET Timer supports MSI
//
if (mTimerConfiguration.Bits.MsiInterruptCapability != 0) {
//
// Save the index of the first HPET Timer that supports MSI interrupts
//
if (MsiTimerIndex == HPET_INVALID_TIMER_INDEX) {
MsiTimerIndex = TimerIndex;
}
}
//
// Check to see if this HPET Timer supports I/O APIC interrupts
//
if (mTimerConfiguration.Bits.InterruptRouteCapability != 0) {
//
// Save the index of the first HPET Timer that supports I/O APIC interrupts
//
if (mTimerIndex == HPET_INVALID_TIMER_INDEX) {
mTimerIndex = TimerIndex;
mTimerIrq = (UINT32)LowBitSet32 (mTimerConfiguration.Bits.InterruptRouteCapability);
}
}
}
if (FeaturePcdGet (PcdHpetMsiEnable) && (MsiTimerIndex != HPET_INVALID_TIMER_INDEX)) {
//
// Use MSI interrupt if supported
//
mTimerIndex = MsiTimerIndex;
//
// Program MSI Address and MSI Data values in the selected HPET Timer
//
HpetTimerMsiRoute.Bits.Address = GetApicMsiAddress ();
HpetTimerMsiRoute.Bits.Value = (UINT32)GetApicMsiValue (PcdGet8 (PcdHpetLocalApicVector), LOCAL_APIC_DELIVERY_MODE_LOWEST_PRIORITY, FALSE, FALSE);
HpetWrite (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, HpetTimerMsiRoute.Uint64);
//
// Read the HPET Timer Capabilities and Configuration register and initialize for MSI mode
// Clear LevelTriggeredInterrupt to use edge triggered interrupts when in MSI mode
//
mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
mTimerConfiguration.Bits.LevelTriggeredInterrupt = 0;
} else {
//
// If no HPET timers support MSI or I/O APIC modes, then ASSERT() and unload the driver.
//
ASSERT (mTimerIndex != HPET_INVALID_TIMER_INDEX);
if (mTimerIndex == HPET_INVALID_TIMER_INDEX) {
DEBUG ((DEBUG_ERROR, "No HPET timers support MSI or I/O APIC mode. Unload HPET driver.\n"));
return EFI_DEVICE_ERROR;
}
//
// Initialize I/O APIC entry for HPET Timer Interrupt
// Fixed Delivery Mode, Level Triggered, Asserted Low
//
IoApicConfigureInterrupt (mTimerIrq, PcdGet8 (PcdHpetLocalApicVector), IO_APIC_DELIVERY_MODE_LOWEST_PRIORITY, TRUE, FALSE);
//
// Read the HPET Timer Capabilities and Configuration register and initialize for I/O APIC mode
// Clear MsiInterruptCapability to force rest of driver to use I/O APIC mode
// Set LevelTriggeredInterrupt to use level triggered interrupts when in I/O APIC mode
// Set InterruptRoute field based in mTimerIrq
//
mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
mTimerConfiguration.Bits.LevelTriggeredInterrupt = 1;
mTimerConfiguration.Bits.InterruptRoute = mTimerIrq;
}
//
// Configure the selected HPET Timer with settings common to both MSI mode and I/O APIC mode
// Clear InterruptEnable to keep interrupts disabled until full init is complete
// Clear PeriodicInterruptEnable to use one-shot mode
// Configure as a 32-bit counter
//
mTimerConfiguration.Bits.InterruptEnable = 0;
mTimerConfiguration.Bits.PeriodicInterruptEnable = 0;
mTimerConfiguration.Bits.CounterSizeEnable = 1;
HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
//
// Read the HPET Timer Capabilities and Configuration register back again.
// CounterSizeEnable will be read back as a 0 if it is a 32-bit only timer
//
mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
if ((mTimerConfiguration.Bits.CounterSizeEnable == 1) && (sizeof (UINTN) == sizeof (UINT64))) {
DEBUG ((DEBUG_INFO, "Choose 64-bit HPET timer.\n"));
//
// 64-bit BIOS can use 64-bit HPET timer
//
mCounterMask = 0xffffffffffffffffULL;
//
// Set timer back to 64-bit
//
mTimerConfiguration.Bits.CounterSizeEnable = 0;
HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
} else {
DEBUG ((DEBUG_INFO, "Choose 32-bit HPET timer.\n"));
mCounterMask = 0x00000000ffffffffULL;
}
//
// Install interrupt handler for selected HPET Timer
//
Status = mCpu->RegisterInterruptHandler (mCpu, PcdGet8 (PcdHpetLocalApicVector), TimerInterruptHandler);
ASSERT_EFI_ERROR (Status);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Unable to register HPET interrupt with CPU Arch Protocol. Unload HPET driver.\n"));
return EFI_DEVICE_ERROR;
}
//
// Force the HPET Timer to be enabled at its default period
//
Status = TimerDriverSetTimerPeriod (&mTimer, PcdGet64 (PcdHpetDefaultTimerPeriod));
ASSERT_EFI_ERROR (Status);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Unable to set HPET default timer rate. Unload HPET driver.\n"));
return EFI_DEVICE_ERROR;
}
//
// Show state of enabled HPET timer
//
DEBUG_CODE_BEGIN ();
if ((mTimerConfiguration.Bits.MsiInterruptCapability != 0) && FeaturePcdGet (PcdHpetMsiEnable)) {
DEBUG ((DEBUG_INFO, "HPET Interrupt Mode MSI\n"));
} else {
DEBUG ((DEBUG_INFO, "HPET Interrupt Mode I/O APIC\n"));
DEBUG ((DEBUG_INFO, "HPET I/O APIC IRQ = 0x%02x\n", mTimerIrq));
}
DEBUG ((DEBUG_INFO, "HPET Interrupt Vector = 0x%02x\n", PcdGet8 (PcdHpetLocalApicVector)));
DEBUG ((DEBUG_INFO, "HPET Counter Mask = 0x%016lx\n", mCounterMask));
DEBUG ((DEBUG_INFO, "HPET Timer Period = %d\n", mTimerPeriod));
DEBUG ((DEBUG_INFO, "HPET Timer Count = 0x%016lx\n", mTimerCount));
DEBUG ((DEBUG_INFO, "HPET_TIMER%d_CONFIGURATION = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
DEBUG ((DEBUG_INFO, "HPET_TIMER%d_COMPARATOR = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
DEBUG ((DEBUG_INFO, "HPET_TIMER%d_MSI_ROUTE = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
//
// Wait for a few timer interrupts to fire before continuing
//
while (mNumTicks < 10) {
}
DEBUG_CODE_END ();
//
// Install the Timer Architectural Protocol onto a new handle
//
Status = gBS->InstallMultipleProtocolInterfaces (
&mTimerHandle,
&gEfiTimerArchProtocolGuid,
&mTimer,
NULL
);
ASSERT_EFI_ERROR (Status);
return Status;
}