IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/InternalIsaIo.h - third_party/edk2 - Git at Google

 /** @file
   The header file for EFI_ISA_IO protocol implementation.

 Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
 This program and the accompanying materials
 are licensed and made available under the terms and conditions of the BSD License
 which accompanies this distribution.  The full text of the license may be found at
 http://opensource.org/licenses/bsd-license.php

 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 **/

 #ifndef _INTERNAL_ISA_IO_H_
 #define _INTERNAL_ISA_IO_H_

 #include "InternalIsaBus.h"

 //
 // Bits definition of PcdIsaBusSupportedFeatures
 //
 #define PCD_ISA_BUS_SUPPORT_DMA                  BIT0
 #define PCD_ISA_BUS_ONLY_SUPPORT_SLAVE_DMA       BIT1
 #define PCD_ISA_BUS_SUPPORT_ISA_MEMORY           BIT2

 //
 // ISA I/O Support Function Prototypes
 //

 /**
   Verifies access to an ISA device

   @param[in] IsaIoDevice         The ISA device to be verified.
   @param[in] Type                The Access type. The input must be either IsaAccessTypeMem or IsaAccessTypeIo.
   @param[in] Width               The width of the memory operation.
   @param[in] Count               The number of memory operations to perform.
   @param[in] Offset              The offset in ISA memory space to start the memory operation.

   @retval EFI_SUCCESS            Verify success.
   @retval EFI_INVALID_PARAMETER  One of the parameters has an invalid value.
   @retval EFI_UNSUPPORTED        The device ont support the access type.
 **/
 EFI_STATUS
 IsaIoVerifyAccess (
   IN ISA_IO_DEVICE              *IsaIoDevice,
   IN ISA_ACCESS_TYPE            Type,
   IN EFI_ISA_IO_PROTOCOL_WIDTH  Width,
   IN UINTN                      Count,
   IN UINT32                     Offset
   );

 /**
   Performs an ISA I/O Read Cycle

   @param[in]  This              A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in]  Width             Specifies the width of the I/O operation.
   @param[in]  Offset            The offset in ISA I/O space to start the I/O operation.
   @param[in]  Count             The number of I/O operations to perform.
   @param[out] Buffer            The destination buffer to store the results

   @retval EFI_SUCCESS           The data was read from the device sucessfully.
   @retval EFI_UNSUPPORTED       The Offset is not valid for this device.
   @retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoIoRead (
   IN  EFI_ISA_IO_PROTOCOL        *This,
   IN  EFI_ISA_IO_PROTOCOL_WIDTH  Width,
   IN  UINT32                     Offset,
   IN  UINTN                      Count,
   OUT VOID                       *Buffer
   );

 /**
   Performs an ISA I/O Write Cycle

   @param[in] This                A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in] Width               Specifies the width of the I/O operation.
   @param[in] Offset              The offset in ISA I/O space to start the I/O operation.
   @param[in] Count               The number of I/O operations to perform.
   @param[in] Buffer              The source buffer to write data from

   @retval EFI_SUCCESS            The data was writen to the device sucessfully.
   @retval EFI_UNSUPPORTED        The Offset is not valid for this device.
   @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
   @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoIoWrite (
   IN EFI_ISA_IO_PROTOCOL        *This,
   IN EFI_ISA_IO_PROTOCOL_WIDTH  Width,
   IN UINT32                     Offset,
   IN UINTN                      Count,
   IN VOID                       *Buffer
   );

 /**
   Maps a memory region for DMA

   @param This                    A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param Operation               Indicates the type of DMA (slave or bus master), and if
                                  the DMA operation is going to read or write to system memory.
   @param ChannelNumber           The slave channel number to use for this DMA operation.
                                  If Operation and ChannelAttributes shows that this device
                                  performs bus mastering DMA, then this field is ignored.
                                  The legal range for this field is 0..7.
   @param ChannelAttributes       The attributes of the DMA channel to use for this DMA operation
   @param HostAddress             The system memory address to map to the device.
   @param NumberOfBytes           On input the number of bytes to map.  On output the number
                                  of bytes that were mapped.
   @param DeviceAddress           The resulting map address for the bus master device to use
                                  to access the hosts HostAddress.
   @param Mapping                 A resulting value to pass to EFI_ISA_IO.Unmap().

   @retval EFI_SUCCESS            The range was mapped for the returned NumberOfBytes.
   @retval EFI_INVALID_PARAMETER  The Operation or HostAddress is undefined.
   @retval EFI_UNSUPPORTED        The HostAddress can not be mapped as a common buffer.
   @retval EFI_DEVICE_ERROR       The system hardware could not map the requested address.
   @retval EFI_OUT_OF_RESOURCES   The memory pages could not be allocated.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoMap (
   IN     EFI_ISA_IO_PROTOCOL            *This,
   IN     EFI_ISA_IO_PROTOCOL_OPERATION  Operation,
   IN     UINT8                          ChannelNumber  OPTIONAL,
   IN     UINT32                         ChannelAttributes,
   IN     VOID                           *HostAddress,
   IN OUT UINTN                          *NumberOfBytes,
   OUT    EFI_PHYSICAL_ADDRESS           *DeviceAddress,
   OUT    VOID                           **Mapping
   );

 /**
   Unmaps a memory region for DMA

   @param[in] This           A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in] Mapping        The mapping value returned from EFI_ISA_IO.Map().

   @retval EFI_SUCCESS       The range was unmapped.
   @retval EFI_DEVICE_ERROR  The data was not committed to the target system memory.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoUnmap (
   IN EFI_ISA_IO_PROTOCOL  *This,
   IN VOID                 *Mapping
   );

 /**
   Flushes any posted write data to the system memory.

   @param[in] This             A pointer to the EFI_ISA_IO_PROTOCOL instance.

   @retval  EFI_SUCCESS        The buffers were flushed.
   @retval  EFI_DEVICE_ERROR   The buffers were not flushed due to a hardware error.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoFlush (
   IN EFI_ISA_IO_PROTOCOL  *This
   );

 /**
   Writes I/O operation base address and count number to a 8 bit I/O Port.

   @param[in] This                A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in] AddrOffset          The address' offset.
   @param[in] PageOffset          The page's offest.
   @param[in] CountOffset         The count's offset.
   @param[in] BaseAddress         The base address.
   @param[in] Count               The number of I/O operations to perform.

   @retval EFI_SUCCESS            Success.
   @retval EFI_INVALID_PARAMETER  Parameter is invalid.
   @retval EFI_UNSUPPORTED        The address range specified by these Offsets and Count is not valid.
   @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 WriteDmaPort (
   IN EFI_ISA_IO_PROTOCOL  *This,
   IN UINT32               AddrOffset,
   IN UINT32               PageOffset,
   IN UINT32               CountOffset,
   IN UINT32               BaseAddress,
   IN UINT16               Count
   );

 /**
   Writes an 8-bit I/O Port

   @param[in] This                A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in] Offset              The offset in ISA IO space to start the IO operation.
   @param[in] Value               The data to write port.

   @retval EFI_SUCCESS            Success.
   @retval EFI_INVALID_PARAMETER  Parameter is invalid.
   @retval EFI_UNSUPPORTED        The address range specified by Offset is not valid.
   @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 WritePort (
   IN EFI_ISA_IO_PROTOCOL  *This,
   IN UINT32               Offset,
   IN UINT8                Value
   );

 /**
   Performs an ISA Memory Read Cycle

   @param[in]  This               A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in]  Width              Specifies the width of the memory operation.
   @param[in]  Offset             The offset in ISA memory space to start the memory operation.
   @param[in]  Count              The number of memory operations to perform.
   @param[out] Buffer             The destination buffer to store the results

   @retval EFI_SUCCESS            The data was read from the device successfully.
   @retval EFI_UNSUPPORTED        The Offset is not valid for this device.
   @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
   @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoMemRead (
   IN  EFI_ISA_IO_PROTOCOL        *This,
   IN  EFI_ISA_IO_PROTOCOL_WIDTH  Width,
   IN  UINT32                     Offset,
   IN  UINTN                      Count,
   OUT VOID                       *Buffer
   );


 /**
   Performs an ISA Memory Write Cycle

   @param[in] This                A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in] Width               Specifies the width of the memory operation.
   @param[in] Offset              The offset in ISA memory space to start the memory operation.
   @param[in] Count               The number of memory operations to perform.
   @param[in] Buffer              The source buffer to write data from

   @retval EFI_SUCCESS            The data was written to the device sucessfully.
   @retval EFI_UNSUPPORTED        The Offset is not valid for this device.
   @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
   @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoMemWrite (
   IN EFI_ISA_IO_PROTOCOL        *This,
   IN EFI_ISA_IO_PROTOCOL_WIDTH  Width,
   IN UINT32                     Offset,
   IN UINTN                      Count,
   IN VOID                       *Buffer
   );

 /**
   Copy one region of ISA memory space to another region of ISA memory space on the ISA controller.

   @param[in]  This               A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in]  Width              Specifies the width of the memory copy operation.
   @param[in]  DestOffset         The offset of the destination
   @param[in]  SrcOffset          The offset of the source
   @param[in]  Count              The number of memory copy  operations to perform

   @retval EFI_SUCCESS            The data was copied sucessfully.
   @retval EFI_UNSUPPORTED        The DestOffset or SrcOffset is not valid for this device.
   @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
   @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a lack of resources.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoCopyMem (
   IN EFI_ISA_IO_PROTOCOL        *This,
   IN EFI_ISA_IO_PROTOCOL_WIDTH  Width,
   IN UINT32                     DestOffset,
   IN UINT32                     SrcOffset,
   IN UINTN                      Count
   );

 /**
   Allocates pages that are suitable for an EfiIsaIoOperationBusMasterCommonBuffer mapping.

   @param[in]  This               A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in]  Type               The type allocation to perform.
   @param[in]  MemoryType         The type of memory to allocate.
   @param[in]  Pages              The number of pages to allocate.
   @param[out] HostAddress        A pointer to store the base address of the allocated range.
   @param[in]  Attributes         The requested bit mask of attributes for the allocated range.

   @retval EFI_SUCCESS            The requested memory pages were allocated.
   @retval EFI_INVALID_PARAMETER  Type is invalid or MemoryType is invalid or HostAddress is NULL
   @retval EFI_UNSUPPORTED        Attributes is unsupported or the memory range specified
                                  by HostAddress, Pages, and Type is not available for common buffer use.
   @retval EFI_OUT_OF_RESOURCES   The memory pages could not be allocated.
 **/
 EFI_STATUS
 EFIAPI
 IsaIoAllocateBuffer (
   IN  EFI_ISA_IO_PROTOCOL  *This,
   IN  EFI_ALLOCATE_TYPE    Type,
   IN  EFI_MEMORY_TYPE      MemoryType,
   IN  UINTN                Pages,
   OUT VOID                 **HostAddress,
   IN  UINT64               Attributes
   );

 /**
   Frees memory that was allocated with EFI_ISA_IO.AllocateBuffer().

   @param[in] This                A pointer to the EFI_ISA_IO_PROTOCOL instance.
   @param[in] Pages               The number of pages to free.
   @param[in] HostAddress         The base address of the allocated range.

   @retval EFI_SUCCESS            The requested memory pages were freed.
   @retval EFI_INVALID_PARAMETER  The memory was not allocated with EFI_ISA_IO.AllocateBufer().
 **/
 EFI_STATUS
 EFIAPI
 IsaIoFreeBuffer (
   IN EFI_ISA_IO_PROTOCOL  *This,
   IN UINTN                Pages,
   IN VOID                 *HostAddress
   );

 #endif
	/** @file
	The header file for EFI_ISA_IO protocol implementation.

	Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
	This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	**/

	#ifndef _INTERNAL_ISA_IO_H_
	#define _INTERNAL_ISA_IO_H_

	#include "InternalIsaBus.h"

	//
	// Bits definition of PcdIsaBusSupportedFeatures
	//
	#define PCD_ISA_BUS_SUPPORT_DMA BIT0
	#define PCD_ISA_BUS_ONLY_SUPPORT_SLAVE_DMA BIT1
	#define PCD_ISA_BUS_SUPPORT_ISA_MEMORY BIT2

	//
	// ISA I/O Support Function Prototypes
	//

	/**
	Verifies access to an ISA device

	@param[in] IsaIoDevice The ISA device to be verified.
	@param[in] Type The Access type. The input must be either IsaAccessTypeMem or IsaAccessTypeIo.
	@param[in] Width The width of the memory operation.
	@param[in] Count The number of memory operations to perform.
	@param[in] Offset The offset in ISA memory space to start the memory operation.

	@retval EFI_SUCCESS Verify success.
	@retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
	@retval EFI_UNSUPPORTED The device ont support the access type.
	**/
	EFI_STATUS
	IsaIoVerifyAccess (
	IN ISA_IO_DEVICE *IsaIoDevice,
	IN ISA_ACCESS_TYPE Type,
	IN EFI_ISA_IO_PROTOCOL_WIDTH Width,
	IN UINTN Count,
	IN UINT32 Offset
	);

	/**
	Performs an ISA I/O Read Cycle

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Width Specifies the width of the I/O operation.
	@param[in] Offset The offset in ISA I/O space to start the I/O operation.
	@param[in] Count The number of I/O operations to perform.
	@param[out] Buffer The destination buffer to store the results

	@retval EFI_SUCCESS The data was read from the device sucessfully.
	@retval EFI_UNSUPPORTED The Offset is not valid for this device.
	@retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoIoRead (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ISA_IO_PROTOCOL_WIDTH Width,
	IN UINT32 Offset,
	IN UINTN Count,
	OUT VOID *Buffer
	);

	/**
	Performs an ISA I/O Write Cycle

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Width Specifies the width of the I/O operation.
	@param[in] Offset The offset in ISA I/O space to start the I/O operation.
	@param[in] Count The number of I/O operations to perform.
	@param[in] Buffer The source buffer to write data from

	@retval EFI_SUCCESS The data was writen to the device sucessfully.
	@retval EFI_UNSUPPORTED The Offset is not valid for this device.
	@retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoIoWrite (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ISA_IO_PROTOCOL_WIDTH Width,
	IN UINT32 Offset,
	IN UINTN Count,
	IN VOID *Buffer
	);

	/**
	Maps a memory region for DMA

	@param This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param Operation Indicates the type of DMA (slave or bus master), and if
	the DMA operation is going to read or write to system memory.
	@param ChannelNumber The slave channel number to use for this DMA operation.
	If Operation and ChannelAttributes shows that this device
	performs bus mastering DMA, then this field is ignored.
	The legal range for this field is 0..7.
	@param ChannelAttributes The attributes of the DMA channel to use for this DMA operation
	@param HostAddress The system memory address to map to the device.
	@param NumberOfBytes On input the number of bytes to map. On output the number
	of bytes that were mapped.
	@param DeviceAddress The resulting map address for the bus master device to use
	to access the hosts HostAddress.
	@param Mapping A resulting value to pass to EFI_ISA_IO.Unmap().

	@retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
	@retval EFI_INVALID_PARAMETER The Operation or HostAddress is undefined.
	@retval EFI_UNSUPPORTED The HostAddress can not be mapped as a common buffer.
	@retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
	@retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoMap (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ISA_IO_PROTOCOL_OPERATION Operation,
	IN UINT8 ChannelNumber OPTIONAL,
	IN UINT32 ChannelAttributes,
	IN VOID *HostAddress,
	IN OUT UINTN *NumberOfBytes,
	OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
	OUT VOID **Mapping
	);

	/**
	Unmaps a memory region for DMA

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Mapping The mapping value returned from EFI_ISA_IO.Map().

	@retval EFI_SUCCESS The range was unmapped.
	@retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoUnmap (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN VOID *Mapping
	);

	/**
	Flushes any posted write data to the system memory.

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.

	@retval EFI_SUCCESS The buffers were flushed.
	@retval EFI_DEVICE_ERROR The buffers were not flushed due to a hardware error.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoFlush (
	IN EFI_ISA_IO_PROTOCOL *This
	);

	/**
	Writes I/O operation base address and count number to a 8 bit I/O Port.

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] AddrOffset The address' offset.
	@param[in] PageOffset The page's offest.
	@param[in] CountOffset The count's offset.
	@param[in] BaseAddress The base address.
	@param[in] Count The number of I/O operations to perform.

	@retval EFI_SUCCESS Success.
	@retval EFI_INVALID_PARAMETER Parameter is invalid.
	@retval EFI_UNSUPPORTED The address range specified by these Offsets and Count is not valid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	WriteDmaPort (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN UINT32 AddrOffset,
	IN UINT32 PageOffset,
	IN UINT32 CountOffset,
	IN UINT32 BaseAddress,
	IN UINT16 Count
	);

	/**
	Writes an 8-bit I/O Port

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Offset The offset in ISA IO space to start the IO operation.
	@param[in] Value The data to write port.

	@retval EFI_SUCCESS Success.
	@retval EFI_INVALID_PARAMETER Parameter is invalid.
	@retval EFI_UNSUPPORTED The address range specified by Offset is not valid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	WritePort (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN UINT32 Offset,
	IN UINT8 Value
	);

	/**
	Performs an ISA Memory Read Cycle

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Width Specifies the width of the memory operation.
	@param[in] Offset The offset in ISA memory space to start the memory operation.
	@param[in] Count The number of memory operations to perform.
	@param[out] Buffer The destination buffer to store the results

	@retval EFI_SUCCESS The data was read from the device successfully.
	@retval EFI_UNSUPPORTED The Offset is not valid for this device.
	@retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoMemRead (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ISA_IO_PROTOCOL_WIDTH Width,
	IN UINT32 Offset,
	IN UINTN Count,
	OUT VOID *Buffer
	);


	/**
	Performs an ISA Memory Write Cycle

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Width Specifies the width of the memory operation.
	@param[in] Offset The offset in ISA memory space to start the memory operation.
	@param[in] Count The number of memory operations to perform.
	@param[in] Buffer The source buffer to write data from

	@retval EFI_SUCCESS The data was written to the device sucessfully.
	@retval EFI_UNSUPPORTED The Offset is not valid for this device.
	@retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoMemWrite (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ISA_IO_PROTOCOL_WIDTH Width,
	IN UINT32 Offset,
	IN UINTN Count,
	IN VOID *Buffer
	);

	/**
	Copy one region of ISA memory space to another region of ISA memory space on the ISA controller.

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Width Specifies the width of the memory copy operation.
	@param[in] DestOffset The offset of the destination
	@param[in] SrcOffset The offset of the source
	@param[in] Count The number of memory copy operations to perform

	@retval EFI_SUCCESS The data was copied sucessfully.
	@retval EFI_UNSUPPORTED The DestOffset or SrcOffset is not valid for this device.
	@retval EFI_INVALID_PARAMETER Width or Count, or both, were invalid.
	@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoCopyMem (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ISA_IO_PROTOCOL_WIDTH Width,
	IN UINT32 DestOffset,
	IN UINT32 SrcOffset,
	IN UINTN Count
	);

	/**
	Allocates pages that are suitable for an EfiIsaIoOperationBusMasterCommonBuffer mapping.

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Type The type allocation to perform.
	@param[in] MemoryType The type of memory to allocate.
	@param[in] Pages The number of pages to allocate.
	@param[out] HostAddress A pointer to store the base address of the allocated range.
	@param[in] Attributes The requested bit mask of attributes for the allocated range.

	@retval EFI_SUCCESS The requested memory pages were allocated.
	@retval EFI_INVALID_PARAMETER Type is invalid or MemoryType is invalid or HostAddress is NULL
	@retval EFI_UNSUPPORTED Attributes is unsupported or the memory range specified
	by HostAddress, Pages, and Type is not available for common buffer use.
	@retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
	**/
	EFI_STATUS
	EFIAPI
	IsaIoAllocateBuffer (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN EFI_ALLOCATE_TYPE Type,
	IN EFI_MEMORY_TYPE MemoryType,
	IN UINTN Pages,
	OUT VOID **HostAddress,
	IN UINT64 Attributes
	);

	/**
	Frees memory that was allocated with EFI_ISA_IO.AllocateBuffer().

	@param[in] This A pointer to the EFI_ISA_IO_PROTOCOL instance.
	@param[in] Pages The number of pages to free.
	@param[in] HostAddress The base address of the allocated range.

	@retval EFI_SUCCESS The requested memory pages were freed.
	@retval EFI_INVALID_PARAMETER The memory was not allocated with EFI_ISA_IO.AllocateBufer().
	**/
	EFI_STATUS
	EFIAPI
	IsaIoFreeBuffer (
	IN EFI_ISA_IO_PROTOCOL *This,
	IN UINTN Pages,
	IN VOID *HostAddress
	);

	#endif