blob: cf1b97fb9ed62d2619bdebd6ad964b33cbf4f923 [file] [log] [blame]
/** @file
*
* Copyright (c) 2011-2013, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
**/
#include "Mmc.h"
#if !defined (MDEPKG_NDEBUG)
CONST CHAR8 *mStrUnit[] = {
"100kbit/s", "1Mbit/s", "10Mbit/s", "100MBit/s",
"Unknown", "Unknown", "Unknown", "Unknown"
};
CONST CHAR8 *mStrValue[] = {
"1.0", "1.2", "1.3", "1.5", "2.0", "2.5", "3.0", "3.5", "4.0", "4.5", "5.0",
"Unknown", "Unknown", "Unknown", "Unknown"
};
#endif
VOID
PrintCID (
IN UINT32 *Cid
)
{
DEBUG ((DEBUG_ERROR, "- PrintCID\n"));
DEBUG ((DEBUG_ERROR, "\t- Manufacturing date: %d/%d\n", (Cid[0] >> 8) & 0xF, (Cid[0] >> 12) & 0xFF));
DEBUG ((DEBUG_ERROR, "\t- Product serial number: 0x%X%X\n", Cid[1] & 0xFFFFFF, (Cid[0] >> 24) & 0xFF));
DEBUG ((DEBUG_ERROR, "\t- Product revision: %d\n", Cid[1] >> 24));
// DEBUG ((DEBUG_ERROR, "\t- Product name: %s\n", (char*)(Cid + 2)));
DEBUG ((DEBUG_ERROR, "\t- OEM ID: %c%c\n", (Cid[3] >> 8) & 0xFF, (Cid[3] >> 16) & 0xFF));
}
VOID
PrintCSD (
IN UINT32 *Csd
)
{
UINTN Value;
if (((Csd[2] >> 30) & 0x3) == 0) {
DEBUG ((DEBUG_ERROR, "- PrintCSD Version 1.01-1.10/Version 2.00/Standard Capacity\n"));
} else if (((Csd[2] >> 30) & 0x3) == 1) {
DEBUG ((DEBUG_ERROR, "- PrintCSD Version 2.00/High Capacity\n"));
} else {
DEBUG ((DEBUG_ERROR, "- PrintCSD Version Higher than v3.3\n"));
}
DEBUG ((DEBUG_ERROR, "\t- Supported card command class: 0x%X\n", MMC_CSD_GET_CCC (Csd)));
DEBUG ((DEBUG_ERROR, "\t- Speed: %a %a\n", mStrValue[(MMC_CSD_GET_TRANSPEED (Csd) >> 3) & 0xF], mStrUnit[MMC_CSD_GET_TRANSPEED (Csd) & 7]));
DEBUG ((DEBUG_ERROR, "\t- Maximum Read Data Block: %d\n", 2 << (MMC_CSD_GET_READBLLEN (Csd)-1)));
DEBUG ((DEBUG_ERROR, "\t- Maximum Write Data Block: %d\n", 2 << (MMC_CSD_GET_WRITEBLLEN (Csd)-1)));
if (!MMC_CSD_GET_FILEFORMATGRP (Csd)) {
Value = MMC_CSD_GET_FILEFORMAT (Csd);
if (Value == 0) {
DEBUG ((DEBUG_ERROR, "\t- Format (0): Hard disk-like file system with partition table\n"));
} else if (Value == 1) {
DEBUG ((DEBUG_ERROR, "\t- Format (1): DOS FAT (floppy-like) with boot sector only (no partition table)\n"));
} else if (Value == 2) {
DEBUG ((DEBUG_ERROR, "\t- Format (2): Universal File Format\n"));
} else {
DEBUG ((DEBUG_ERROR, "\t- Format (3): Others/Unknown\n"));
}
} else {
DEBUG ((DEBUG_ERROR, "\t- Format: Reserved\n"));
}
}
VOID
PrintRCA (
IN UINT32 Rca
)
{
DEBUG ((DEBUG_ERROR, "- PrintRCA: 0x%X\n", Rca));
DEBUG ((DEBUG_ERROR, "\t- Status: 0x%X\n", Rca & 0xFFFF));
DEBUG ((DEBUG_ERROR, "\t- RCA: 0x%X\n", (Rca >> 16) & 0xFFFF));
}
VOID
PrintOCR (
IN UINT32 Ocr
)
{
UINTN MinV;
UINTN MaxV;
UINTN Volts;
UINTN Loop;
MinV = 36; // 3.6
MaxV = 20; // 2.0
Volts = 20; // 2.0
// The MMC register bits [23:8] indicate the working range of the card
for (Loop = 8; Loop < 24; Loop++) {
if (Ocr & (1 << Loop)) {
if (MinV > Volts) {
MinV = Volts;
}
if (MaxV < Volts) {
MaxV = Volts + 1;
}
}
Volts++;
}
DEBUG ((DEBUG_ERROR, "- PrintOCR Ocr (0x%X)\n", Ocr));
DEBUG ((DEBUG_ERROR, "\t- Card operating voltage: %d.%d to %d.%d\n", MinV/10, MinV % 10, MaxV/10, MaxV % 10));
if (((Ocr >> 29) & 3) == 0) {
DEBUG ((DEBUG_ERROR, "\t- AccessMode: Byte Mode\n"));
} else {
DEBUG ((DEBUG_ERROR, "\t- AccessMode: Block Mode (0x%X)\n", ((Ocr >> 29) & 3)));
}
if (Ocr & MMC_OCR_POWERUP) {
DEBUG ((DEBUG_ERROR, "\t- PowerUp\n"));
} else {
DEBUG ((DEBUG_ERROR, "\t- Voltage Not Supported\n"));
}
}
VOID
PrintResponseR1 (
IN UINT32 Response
)
{
DEBUG ((DEBUG_INFO, "Response: 0x%X\n", Response));
if (Response & MMC_R0_READY_FOR_DATA) {
DEBUG ((DEBUG_INFO, "\t- READY_FOR_DATA\n"));
}
switch ((Response >> 9) & 0xF) {
case 0:
DEBUG ((DEBUG_INFO, "\t- State: Idle\n"));
break;
case 1:
DEBUG ((DEBUG_INFO, "\t- State: Ready\n"));
break;
case 2:
DEBUG ((DEBUG_INFO, "\t- State: Ident\n"));
break;
case 3:
DEBUG ((DEBUG_INFO, "\t- State: StandBy\n"));
break;
case 4:
DEBUG ((DEBUG_INFO, "\t- State: Tran\n"));
break;
case 5:
DEBUG ((DEBUG_INFO, "\t- State: Data\n"));
break;
case 6:
DEBUG ((DEBUG_INFO, "\t- State: Rcv\n"));
break;
case 7:
DEBUG ((DEBUG_INFO, "\t- State: Prg\n"));
break;
case 8:
DEBUG ((DEBUG_INFO, "\t- State: Dis\n"));
break;
default:
DEBUG ((DEBUG_INFO, "\t- State: Reserved\n"));
break;
}
}