| /** @file | |
| Trace reporting for the Dp utility. | |
| Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved. | |
| (C) Copyright 2015-2016 Hewlett Packard Enterprise Development LP<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include <Library/BaseLib.h> | |
| #include <Library/BaseMemoryLib.h> | |
| #include <Library/MemoryAllocationLib.h> | |
| #include <Library/DebugLib.h> | |
| #include <Library/UefiBootServicesTableLib.h> | |
| #include <Library/PeCoffGetEntryPointLib.h> | |
| #include <Library/PerformanceLib.h> | |
| #include <Library/PrintLib.h> | |
| #include <Library/HiiLib.h> | |
| #include <Library/PcdLib.h> | |
| #include "Dp.h" | |
| #include "Literals.h" | |
| #include "DpInternal.h" | |
| /** | |
| Attempts to retrieve a performance measurement log entry from the performance measurement log. | |
| @param LogEntryKey On entry, the key of the performance measurement log entry to retrieve. | |
| 0, then the first performance measurement log entry is retrieved. | |
| On exit, the key of the next performance log entry. | |
| @param Handle Pointer to environment specific context used to identify the component | |
| being measured. | |
| @param Token Pointer to a Null-terminated ASCII string that identifies the component | |
| being measured. | |
| @param Module Pointer to a Null-terminated ASCII string that identifies the module | |
| being measured. | |
| @param StartTimeStamp Pointer to the 64-bit time stamp that was recorded when the measurement | |
| was started. | |
| @param EndTimeStamp Pointer to the 64-bit time stamp that was recorded when the measurement | |
| was ended. | |
| @param Identifier Pointer to the 32-bit identifier that was recorded when the measurement | |
| was ended. | |
| @return The key for the next performance log entry (in general case). | |
| **/ | |
| UINTN | |
| GetPerformanceMeasurementRecord ( | |
| IN UINTN LogEntryKey, | |
| OUT CONST VOID **Handle, | |
| OUT CONST CHAR8 **Token, | |
| OUT CONST CHAR8 **Module, | |
| OUT UINT64 *StartTimeStamp, | |
| OUT UINT64 *EndTimeStamp, | |
| OUT UINT32 *Identifier | |
| ) | |
| { | |
| if (LogEntryKey == mMeasurementNum) { | |
| return 0; | |
| } | |
| *Handle = (VOID *) (UINTN) mMeasurementList[LogEntryKey].Handle; | |
| *Token = mMeasurementList[LogEntryKey].Token; | |
| *Module = mMeasurementList[LogEntryKey].Module; | |
| *StartTimeStamp = mMeasurementList[LogEntryKey].StartTimeStamp; | |
| *EndTimeStamp = mMeasurementList[LogEntryKey].EndTimeStamp; | |
| *Identifier = mMeasurementList[LogEntryKey].Identifier; | |
| LogEntryKey ++; | |
| return LogEntryKey; | |
| } | |
| /** | |
| Collect verbose statistics about the logged performance measurements. | |
| General Summary information for all Trace measurements is gathered and | |
| stored within the SummaryData structure. This information is both | |
| used internally by subsequent reporting functions, and displayed | |
| at the end of verbose reports. | |
| @pre The SummaryData and CumData structures must be initialized | |
| prior to calling this function. | |
| @post The SummaryData and CumData structures contain statistics for the | |
| current performance logs. | |
| @param[in, out] CustomCumulativeData A pointer to the cumtom cumulative data. | |
| **/ | |
| VOID | |
| GatherStatistics( | |
| IN OUT PERF_CUM_DATA *CustomCumulativeData OPTIONAL | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 Duration; | |
| UINTN LogEntryKey; | |
| INTN TIndex; | |
| LogEntryKey = 0; | |
| while ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| { | |
| ++SummaryData.NumTrace; // Count the number of TRACE Measurement records | |
| if (Measurement.EndTimeStamp == 0) { | |
| ++SummaryData.NumIncomplete; // Count the incomplete records | |
| continue; | |
| } | |
| if (Measurement.Handle != NULL) { | |
| ++SummaryData.NumHandles; // Count the number of measurements with non-NULL handles | |
| } | |
| if (IsPhase( &Measurement)) { | |
| ++SummaryData.NumSummary; // Count the number of major phases | |
| } | |
| else { // !IsPhase | |
| if(Measurement.Handle == NULL) { | |
| ++SummaryData.NumGlobal; | |
| } | |
| } | |
| if (AsciiStrCmp (Measurement.Token, ALit_PEIM) == 0) { | |
| ++SummaryData.NumPEIMs; // Count PEIM measurements | |
| } | |
| Duration = GetDuration (&Measurement); | |
| TIndex = GetCumulativeItem (&Measurement); | |
| if (TIndex >= 0) { | |
| CumData[TIndex].Duration += Duration; | |
| CumData[TIndex].Count++; | |
| if ( Duration < CumData[TIndex].MinDur ) { | |
| CumData[TIndex].MinDur = Duration; | |
| } | |
| if ( Duration > CumData[TIndex].MaxDur ) { | |
| CumData[TIndex].MaxDur = Duration; | |
| } | |
| } | |
| // | |
| // Collect the data for custom cumulative data. | |
| // | |
| if ((CustomCumulativeData != NULL) && (AsciiStrCmp (Measurement.Token, CustomCumulativeData->Name) == 0)) { | |
| CustomCumulativeData->Duration += Duration; | |
| CustomCumulativeData->Count++; | |
| if (Duration < CustomCumulativeData->MinDur) { | |
| CustomCumulativeData->MinDur = Duration; | |
| } | |
| if (Duration > CustomCumulativeData->MaxDur) { | |
| CustomCumulativeData->MaxDur = Duration; | |
| } | |
| } | |
| } | |
| } | |
| /** | |
| Gather and print ALL Trace Records. | |
| Displays all "interesting" Trace measurements in order.<BR> | |
| The number of records displayed is controlled by: | |
| - records with a duration less than mInterestThreshold microseconds are not displayed. | |
| - No more than Limit records are displayed. A Limit of zero will not limit the output. | |
| - If the ExcludeFlag is TRUE, records matching entries in the CumData array are not | |
| displayed. | |
| @pre The mInterestThreshold global variable is set to the shortest duration to be printed. | |
| The mGaugeString and mUnicodeToken global arrays are used for temporary string storage. | |
| They must not be in use by a calling function. | |
| @param[in] Limit The number of records to print. Zero is ALL. | |
| @param[in] ExcludeFlag TRUE to exclude individual Cumulative items from display. | |
| @retval EFI_SUCCESS The operation was successful. | |
| @retval EFI_ABORTED The user aborts the operation. | |
| @return Others from a call to gBS->LocateHandleBuffer(). | |
| **/ | |
| EFI_STATUS | |
| DumpAllTrace( | |
| IN UINTN Limit, | |
| IN BOOLEAN ExcludeFlag | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 ElapsedTime; | |
| UINT64 Duration; | |
| CHAR16 *IncFlag; | |
| UINTN LogEntryKey; | |
| UINTN Count; | |
| UINTN Index; | |
| UINTN TIndex; | |
| EFI_HANDLE *HandleBuffer; | |
| UINTN HandleCount; | |
| EFI_STATUS Status; | |
| EFI_STRING StringPtrUnknown; | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| IncFlag = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_ALL), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (IncFlag == NULL) ? StringPtrUnknown : IncFlag); | |
| FreePool (StringPtrUnknown); | |
| // Get Handle information | |
| // | |
| Status = gBS->LocateHandleBuffer (AllHandles, NULL, NULL, &HandleCount, &HandleBuffer); | |
| if (EFI_ERROR (Status)) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLES_ERROR), mDpHiiHandle, Status); | |
| } | |
| else { | |
| // We have successfully populated the HandleBuffer | |
| // Display ALL Measurement Records | |
| // Up to Limit lines displayed | |
| // Display only records with Elapsed times >= mInterestThreshold | |
| // Display driver names in Module field for records with Handles. | |
| // | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_HEADR2), mDpHiiHandle); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_DASHES2), mDpHiiHandle); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_HEADR), mDpHiiHandle); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle); | |
| } | |
| LogEntryKey = 0; | |
| Count = 0; | |
| Index = 0; | |
| while ( WITHIN_LIMIT(Count, Limit) && | |
| ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| ) | |
| { | |
| ++Index; // Count every record. First record is 1. | |
| ElapsedTime = 0; | |
| SHELL_FREE_NON_NULL (IncFlag); | |
| if (Measurement.EndTimeStamp != 0) { | |
| Duration = GetDuration (&Measurement); | |
| ElapsedTime = DurationInMicroSeconds ( Duration ); | |
| IncFlag = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_COMPLETE), NULL); | |
| } | |
| else { | |
| IncFlag = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_INCOMPLETE), NULL); // Mark incomplete records | |
| } | |
| if (((Measurement.EndTimeStamp != 0) && (ElapsedTime < mInterestThreshold)) || | |
| ((ExcludeFlag) && (GetCumulativeItem(&Measurement) >= 0)) | |
| ) { // Ignore "uninteresting" or excluded records | |
| continue; | |
| } | |
| ++Count; // Count the number of records printed | |
| // If Handle is non-zero, see if we can determine a name for the driver | |
| AsciiStrToUnicodeStrS (Measurement.Module, mGaugeString, ARRAY_SIZE (mGaugeString)); // Use Module by default | |
| AsciiStrToUnicodeStrS (Measurement.Token, mUnicodeToken, ARRAY_SIZE (mUnicodeToken)); | |
| if (Measurement.Handle != NULL) { | |
| // See if the Handle is in the HandleBuffer | |
| for (TIndex = 0; TIndex < HandleCount; TIndex++) { | |
| if (Measurement.Handle == HandleBuffer[TIndex]) { | |
| DpGetNameFromHandle (HandleBuffer[TIndex]); | |
| break; | |
| } | |
| } | |
| } | |
| if (AsciiStrCmp (Measurement.Token, ALit_PEIM) == 0) { | |
| UnicodeSPrint (mGaugeString, sizeof (mGaugeString), L"%g", Measurement.Handle); | |
| } | |
| // Ensure that the argument strings are not too long. | |
| mGaugeString[DP_GAUGE_STRING_LENGTH] = 0; | |
| mUnicodeToken[13] = 0; | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_VARS2), mDpHiiHandle, | |
| Index, // 1 based, Which measurement record is being printed | |
| IncFlag, | |
| Measurement.Handle, | |
| mGaugeString, | |
| mUnicodeToken, | |
| ElapsedTime, | |
| Measurement.Identifier | |
| ); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_VARS), mDpHiiHandle, | |
| Index, // 1 based, Which measurement record is being printed | |
| IncFlag, | |
| Measurement.Handle, | |
| mGaugeString, | |
| mUnicodeToken, | |
| ElapsedTime | |
| ); | |
| } | |
| if (ShellGetExecutionBreakFlag ()) { | |
| Status = EFI_ABORTED; | |
| break; | |
| } | |
| } | |
| } | |
| if (HandleBuffer != NULL) { | |
| FreePool (HandleBuffer); | |
| } | |
| SHELL_FREE_NON_NULL (IncFlag); | |
| return Status; | |
| } | |
| /** | |
| Gather and print Raw Trace Records. | |
| All Trace measurements with a duration greater than or equal to | |
| mInterestThreshold are printed without interpretation. | |
| The number of records displayed is controlled by: | |
| - records with a duration less than mInterestThreshold microseconds are not displayed. | |
| - No more than Limit records are displayed. A Limit of zero will not limit the output. | |
| - If the ExcludeFlag is TRUE, records matching entries in the CumData array are not | |
| displayed. | |
| @pre The mInterestThreshold global variable is set to the shortest duration to be printed. | |
| @param[in] Limit The number of records to print. Zero is ALL. | |
| @param[in] ExcludeFlag TRUE to exclude individual Cumulative items from display. | |
| @retval EFI_SUCCESS The operation was successful. | |
| @retval EFI_ABORTED The user aborts the operation. | |
| **/ | |
| EFI_STATUS | |
| DumpRawTrace( | |
| IN UINTN Limit, | |
| IN BOOLEAN ExcludeFlag | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 ElapsedTime; | |
| UINT64 Duration; | |
| UINTN LogEntryKey; | |
| UINTN Count; | |
| UINTN Index; | |
| EFI_STRING StringPtr; | |
| EFI_STRING StringPtrUnknown; | |
| EFI_STATUS Status; | |
| Status = EFI_SUCCESS; | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_RAWTRACE), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (StringPtr == NULL) ? StringPtrUnknown : StringPtr); | |
| FreePool (StringPtr); | |
| FreePool (StringPtrUnknown); | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_HEADR2), mDpHiiHandle); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_DASHES2), mDpHiiHandle); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_HEADR), mDpHiiHandle); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_DASHES), mDpHiiHandle); | |
| } | |
| LogEntryKey = 0; | |
| Count = 0; | |
| Index = 0; | |
| while ( WITHIN_LIMIT(Count, Limit) && | |
| ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| ) | |
| { | |
| ++Index; // Count every record. First record is 1. | |
| ElapsedTime = 0; | |
| if (Measurement.EndTimeStamp != 0) { | |
| Duration = GetDuration (&Measurement); | |
| ElapsedTime = DurationInMicroSeconds ( Duration ); | |
| } | |
| if ((ElapsedTime < mInterestThreshold) || | |
| ((ExcludeFlag) && (GetCumulativeItem(&Measurement) >= 0)) | |
| ) { // Ignore "uninteresting" or Excluded records | |
| continue; | |
| } | |
| ++Count; // Count the number of records printed | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_VARS2), mDpHiiHandle, | |
| Index, // 1 based, Which measurement record is being printed | |
| Measurement.Handle, | |
| Measurement.StartTimeStamp, | |
| Measurement.EndTimeStamp, | |
| Measurement.Token, | |
| Measurement.Module, | |
| Measurement.Identifier | |
| ); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_VARS), mDpHiiHandle, | |
| Index, // 1 based, Which measurement record is being printed | |
| Measurement.Handle, | |
| Measurement.StartTimeStamp, | |
| Measurement.EndTimeStamp, | |
| Measurement.Token, | |
| Measurement.Module | |
| ); | |
| } | |
| if (ShellGetExecutionBreakFlag ()) { | |
| Status = EFI_ABORTED; | |
| break; | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Gather and print Major Phase metrics. | |
| **/ | |
| VOID | |
| ProcessPhases( | |
| VOID | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 BdsTimeoutValue; | |
| UINT64 SecTime; | |
| UINT64 PeiTime; | |
| UINT64 DxeTime; | |
| UINT64 BdsTime; | |
| UINT64 ElapsedTime; | |
| UINT64 Duration; | |
| UINT64 Total; | |
| EFI_STRING StringPtr; | |
| UINTN LogEntryKey; | |
| EFI_STRING StringPtrUnknown; | |
| BdsTimeoutValue = 0; | |
| SecTime = 0; | |
| PeiTime = 0; | |
| DxeTime = 0; | |
| BdsTime = 0; | |
| // | |
| // Get Execution Phase Statistics | |
| // | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_PHASES), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (StringPtr == NULL) ? StringPtrUnknown : StringPtr); | |
| FreePool (StringPtr); | |
| FreePool (StringPtrUnknown); | |
| LogEntryKey = 0; | |
| while ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| { | |
| if (Measurement.EndTimeStamp == 0) { // Skip "incomplete" records | |
| continue; | |
| } | |
| Duration = GetDuration (&Measurement); | |
| if ( Measurement.Handle != NULL | |
| && (AsciiStrCmp (Measurement.Token, ALit_BdsTO) == 0) | |
| ) | |
| { | |
| BdsTimeoutValue = Duration; | |
| } else if (AsciiStrCmp (Measurement.Token, ALit_SEC) == 0) { | |
| SecTime = Duration; | |
| } else if (AsciiStrCmp (Measurement.Token, ALit_PEI) == 0) { | |
| PeiTime = Duration; | |
| } else if (AsciiStrCmp (Measurement.Token, ALit_DXE) == 0) { | |
| DxeTime = Duration; | |
| } else if (AsciiStrCmp (Measurement.Token, ALit_BDS) == 0) { | |
| BdsTime = Duration; | |
| } | |
| } | |
| Total = 0; | |
| // print SEC phase duration time | |
| // | |
| if (SecTime > 0) { | |
| ElapsedTime = DurationInMicroSeconds ( SecTime ); // Calculate elapsed time in microseconds | |
| Total += DivU64x32 (ElapsedTime, 1000); // Accumulate time in milliseconds | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SEC_PHASE), mDpHiiHandle, ElapsedTime); | |
| } | |
| // print PEI phase duration time | |
| // | |
| if (PeiTime > 0) { | |
| ElapsedTime = DivU64x32 (PeiTime, 1000000); | |
| Total += ElapsedTime; | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_DURATION), mDpHiiHandle, ALit_PEI, ElapsedTime); | |
| } | |
| // print DXE phase duration time | |
| // | |
| if (DxeTime > 0) { | |
| ElapsedTime = DivU64x32 (DxeTime, 1000000); | |
| Total += ElapsedTime; | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_DURATION), mDpHiiHandle, ALit_DXE, ElapsedTime); | |
| } | |
| // print BDS phase duration time | |
| // | |
| if (BdsTime > 0) { | |
| ElapsedTime = DivU64x32 (BdsTime, 1000000); | |
| Total += ElapsedTime; | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_DURATION), mDpHiiHandle, ALit_BDS, ElapsedTime); | |
| } | |
| if (BdsTimeoutValue > 0) { | |
| ElapsedTime = DivU64x32 (BdsTimeoutValue, 1000000); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_BDSTO), mDpHiiHandle, ALit_BdsTO, ElapsedTime); | |
| } | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_TOTAL_DURATION), mDpHiiHandle, Total); | |
| } | |
| /** | |
| Gather and print Handle data. | |
| @param[in] ExcludeFlag TRUE to exclude individual Cumulative items from display. | |
| @retval EFI_SUCCESS The operation was successful. | |
| @retval EFI_ABORTED The user aborts the operation. | |
| @return Others from a call to gBS->LocateHandleBuffer(). | |
| **/ | |
| EFI_STATUS | |
| ProcessHandles( | |
| IN BOOLEAN ExcludeFlag | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 ElapsedTime; | |
| UINT64 Duration; | |
| EFI_HANDLE *HandleBuffer; | |
| EFI_STRING StringPtr; | |
| UINTN Index; | |
| UINTN LogEntryKey; | |
| UINTN Count; | |
| UINTN HandleCount; | |
| EFI_STATUS Status; | |
| EFI_STRING StringPtrUnknown; | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_DRIVERS), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (StringPtr == NULL) ? StringPtrUnknown : StringPtr); | |
| FreePool (StringPtr); | |
| FreePool (StringPtrUnknown); | |
| Status = gBS->LocateHandleBuffer (AllHandles, NULL, NULL, &HandleCount, &HandleBuffer); | |
| if (EFI_ERROR (Status)) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLES_ERROR), mDpHiiHandle, Status); | |
| } | |
| else { | |
| #if DP_DEBUG == 2 | |
| Print (L"There are %,d Handles defined.\n", (Size / sizeof(HandleBuffer[0]))); | |
| #endif | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLE_SECTION2), mDpHiiHandle); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLE_SECTION), mDpHiiHandle); | |
| } | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle); | |
| LogEntryKey = 0; | |
| Count = 0; | |
| while ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| { | |
| Count++; | |
| Duration = GetDuration (&Measurement); | |
| ElapsedTime = DurationInMicroSeconds ( Duration ); | |
| if ((ElapsedTime < mInterestThreshold) || | |
| (Measurement.EndTimeStamp == 0) || | |
| (!IsCorePerf (&Measurement)) || | |
| ((ExcludeFlag) && (GetCumulativeItem(&Measurement) >= 0)) | |
| ) { // Ignore "uninteresting" or excluded records | |
| continue; | |
| } | |
| mGaugeString[0] = 0; // Empty driver name by default | |
| AsciiStrToUnicodeStrS (Measurement.Token, mUnicodeToken, ARRAY_SIZE (mUnicodeToken)); | |
| // See if the Handle is in the HandleBuffer | |
| for (Index = 0; Index < HandleCount; Index++) { | |
| if (Measurement.Handle == HandleBuffer[Index]) { | |
| DpGetNameFromHandle (HandleBuffer[Index]); // Name is put into mGaugeString | |
| break; | |
| } | |
| } | |
| // Ensure that the argument strings are not too long. | |
| mGaugeString[DP_GAUGE_STRING_LENGTH] = 0; | |
| mUnicodeToken[11] = 0; | |
| if (mGaugeString[0] != 0) { | |
| // Display the record if it has a valid handle. | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLE_VARS2), mDpHiiHandle, | |
| Count, // 1 based, Which measurement record is being printed | |
| Index + 1, // 1 based, Which handle is being printed | |
| mGaugeString, | |
| mUnicodeToken, | |
| ElapsedTime, | |
| Measurement.Identifier | |
| ); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLE_VARS), mDpHiiHandle, | |
| Count, // 1 based, Which measurement record is being printed | |
| Index + 1, // 1 based, Which handle is being printed | |
| mGaugeString, | |
| mUnicodeToken, | |
| ElapsedTime | |
| ); | |
| } | |
| } | |
| if (ShellGetExecutionBreakFlag ()) { | |
| Status = EFI_ABORTED; | |
| break; | |
| } | |
| } | |
| } | |
| if (HandleBuffer != NULL) { | |
| FreePool (HandleBuffer); | |
| } | |
| return Status; | |
| } | |
| /** | |
| Gather and print PEIM data. | |
| Only prints complete PEIM records | |
| @retval EFI_SUCCESS The operation was successful. | |
| @retval EFI_ABORTED The user aborts the operation. | |
| **/ | |
| EFI_STATUS | |
| ProcessPeims( | |
| VOID | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 Duration; | |
| UINT64 ElapsedTime; | |
| EFI_STRING StringPtr; | |
| UINTN LogEntryKey; | |
| UINTN TIndex; | |
| EFI_STRING StringPtrUnknown; | |
| EFI_STATUS Status; | |
| Status = EFI_SUCCESS; | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_PEIMS), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (StringPtr == NULL) ? StringPtrUnknown : StringPtr); | |
| FreePool (StringPtr); | |
| FreePool (StringPtrUnknown); | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PEIM_SECTION2), mDpHiiHandle); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PEIM_SECTION), mDpHiiHandle); | |
| } | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle); | |
| TIndex = 0; | |
| LogEntryKey = 0; | |
| while ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| { | |
| TIndex++; | |
| if ((Measurement.EndTimeStamp == 0) || | |
| (AsciiStrCmp (Measurement.Token, ALit_PEIM) != 0) | |
| ) { | |
| continue; | |
| } | |
| Duration = GetDuration (&Measurement); | |
| ElapsedTime = DurationInMicroSeconds ( Duration ); // Calculate elapsed time in microseconds | |
| if (ElapsedTime >= mInterestThreshold) { | |
| // PEIM FILE Handle is the start address of its FFS file that contains its file guid. | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PEIM_VARS2), mDpHiiHandle, | |
| TIndex, // 1 based, Which measurement record is being printed | |
| Measurement.Handle, // file guid | |
| ElapsedTime, | |
| Measurement.Identifier | |
| ); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PEIM_VARS), mDpHiiHandle, | |
| TIndex, // 1 based, Which measurement record is being printed | |
| Measurement.Handle, // file guid | |
| ElapsedTime | |
| ); | |
| } | |
| } | |
| if (ShellGetExecutionBreakFlag ()) { | |
| Status = EFI_ABORTED; | |
| break; | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Gather and print global data. | |
| Strips out incomplete or "Execution Phase" records | |
| Only prints records where Handle is NULL | |
| Increment TIndex for every record, even skipped ones, so that we have an | |
| indication of every measurement record taken. | |
| @retval EFI_SUCCESS The operation was successful. | |
| @retval EFI_ABORTED The user aborts the operation. | |
| **/ | |
| EFI_STATUS | |
| ProcessGlobal( | |
| VOID | |
| ) | |
| { | |
| MEASUREMENT_RECORD Measurement; | |
| UINT64 Duration; | |
| UINT64 ElapsedTime; | |
| EFI_STRING StringPtr; | |
| UINTN LogEntryKey; | |
| UINTN Index; // Index, or number, of the measurement record being processed | |
| EFI_STRING StringPtrUnknown; | |
| EFI_STATUS Status; | |
| Status = EFI_SUCCESS; | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_GENERAL), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (StringPtr == NULL) ? StringPtrUnknown: StringPtr); | |
| FreePool (StringPtr); | |
| FreePool (StringPtrUnknown); | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_GLOBAL_SECTION2), mDpHiiHandle); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_GLOBAL_SECTION), mDpHiiHandle); | |
| } | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle); | |
| Index = 1; | |
| LogEntryKey = 0; | |
| while ((LogEntryKey = GetPerformanceMeasurementRecord ( | |
| LogEntryKey, | |
| &Measurement.Handle, | |
| &Measurement.Token, | |
| &Measurement.Module, | |
| &Measurement.StartTimeStamp, | |
| &Measurement.EndTimeStamp, | |
| &Measurement.Identifier)) != 0) | |
| { | |
| AsciiStrToUnicodeStrS (Measurement.Module, mGaugeString, ARRAY_SIZE (mGaugeString)); | |
| AsciiStrToUnicodeStrS (Measurement.Token, mUnicodeToken, ARRAY_SIZE (mUnicodeToken)); | |
| mGaugeString[25] = 0; | |
| mUnicodeToken[31] = 0; | |
| if ( ! ( IsPhase( &Measurement) || | |
| IsCorePerf (&Measurement) || | |
| (Measurement.EndTimeStamp == 0) | |
| )) | |
| { | |
| Duration = GetDuration (&Measurement); | |
| ElapsedTime = DurationInMicroSeconds ( Duration ); | |
| if (ElapsedTime >= mInterestThreshold) { | |
| if (mShowId) { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_GLOBAL_VARS2), mDpHiiHandle, | |
| Index, | |
| mGaugeString, | |
| mUnicodeToken, | |
| ElapsedTime, | |
| Measurement.Identifier | |
| ); | |
| } else { | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_GLOBAL_VARS), mDpHiiHandle, | |
| Index, | |
| mGaugeString, | |
| mUnicodeToken, | |
| ElapsedTime | |
| ); | |
| } | |
| } | |
| } | |
| if (ShellGetExecutionBreakFlag ()) { | |
| Status = EFI_ABORTED; | |
| break; | |
| } | |
| Index++; | |
| } | |
| return Status; | |
| } | |
| /** | |
| Gather and print cumulative data. | |
| Traverse the measurement records and:<BR> | |
| For each record with a Token listed in the CumData array:<BR> | |
| - Update the instance count and the total, minimum, and maximum durations. | |
| Finally, print the gathered cumulative statistics. | |
| @param[in] CustomCumulativeData A pointer to the cumtom cumulative data. | |
| **/ | |
| VOID | |
| ProcessCumulative( | |
| IN PERF_CUM_DATA *CustomCumulativeData OPTIONAL | |
| ) | |
| { | |
| UINT64 AvgDur; // the computed average duration | |
| UINT64 Dur; | |
| UINT64 MinDur; | |
| UINT64 MaxDur; | |
| EFI_STRING StringPtr; | |
| UINTN TIndex; | |
| EFI_STRING StringPtrUnknown; | |
| StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL); | |
| StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_CUMULATIVE), NULL); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SECTION_HEADER), mDpHiiHandle, | |
| (StringPtr == NULL) ? StringPtrUnknown: StringPtr); | |
| FreePool (StringPtr); | |
| FreePool (StringPtrUnknown); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_CUMULATIVE_SECT_1), mDpHiiHandle); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_CUMULATIVE_SECT_2), mDpHiiHandle); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle); | |
| for ( TIndex = 0; TIndex < NumCum; ++TIndex) { | |
| if (CumData[TIndex].Count != 0) { | |
| AvgDur = DivU64x32 (CumData[TIndex].Duration, CumData[TIndex].Count); | |
| AvgDur = DurationInMicroSeconds(AvgDur); | |
| Dur = DurationInMicroSeconds(CumData[TIndex].Duration); | |
| MaxDur = DurationInMicroSeconds(CumData[TIndex].MaxDur); | |
| MinDur = DurationInMicroSeconds(CumData[TIndex].MinDur); | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_CUMULATIVE_STATS), mDpHiiHandle, | |
| CumData[TIndex].Name, | |
| CumData[TIndex].Count, | |
| Dur, | |
| AvgDur, | |
| MinDur, | |
| MaxDur | |
| ); | |
| } | |
| } | |
| // | |
| // Print the custom cumulative data. | |
| // | |
| if (CustomCumulativeData != NULL) { | |
| if (CustomCumulativeData->Count != 0) { | |
| AvgDur = DivU64x32 (CustomCumulativeData->Duration, CustomCumulativeData->Count); | |
| AvgDur = DurationInMicroSeconds (AvgDur); | |
| Dur = DurationInMicroSeconds (CustomCumulativeData->Duration); | |
| MaxDur = DurationInMicroSeconds (CustomCumulativeData->MaxDur); | |
| MinDur = DurationInMicroSeconds (CustomCumulativeData->MinDur); | |
| } else { | |
| AvgDur = 0; | |
| Dur = 0; | |
| MaxDur = 0; | |
| MinDur = 0; | |
| } | |
| ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_CUMULATIVE_STATS), mDpHiiHandle, | |
| CustomCumulativeData->Name, | |
| CustomCumulativeData->Count, | |
| Dur, | |
| AvgDur, | |
| MinDur, | |
| MaxDur | |
| ); | |
| } | |
| } |