FatPkg/FatPei/FatLitePeim.h

/** @file
  Data structures for FAT recovery PEIM

Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>

This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _FAT_PEIM_H_
#define _FAT_PEIM_H_

#include <PiPei.h>

#include <Guid/RecoveryDevice.h>
#include <Ppi/BlockIo.h>
#include <Ppi/BlockIo2.h>
#include <Ppi/DeviceRecoveryModule.h>

#include <Library/DebugLib.h>
#include <Library/BaseLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/BaseMemoryLib.h>
#include <Library/PcdLib.h>
#include <Library/PeiServicesTablePointerLib.h>
#include <Library/PeiServicesLib.h>

#include "FatLiteApi.h"
#include "FatLiteFmt.h"

//
// Definitions
//

#define PEI_FAT_CACHE_SIZE                            4
#define PEI_FAT_MAX_BLOCK_SIZE                        8192
#define FAT_MAX_FILE_NAME_LENGTH                      128
#define PEI_FAT_MAX_BLOCK_DEVICE                      64
#define PEI_FAT_MAX_BLOCK_IO_PPI                      32
#define PEI_FAT_MAX_VOLUME                            64

#define PEI_FAT_MEMMORY_PAGE_SIZE                     0x1000

//
// Data Structures
//
//
// The block device
//
typedef struct {

  UINT32                        BlockSize;
  UINT64                        LastBlock;
  UINT32                        IoAlign;
  BOOLEAN                       Logical;
  BOOLEAN                       PartitionChecked;

  //
  // Following fields only valid for logical device
  //
  CHAR8                         PartitionFlag[8];
  UINT64                        StartingPos;
  UINTN                         ParentDevNo;

  //
  // Following fields only valid for physical device
  //
  EFI_PEI_BLOCK_DEVICE_TYPE     DevType;
  UINT8                         InterfaceType;
  //
  // EFI_PEI_READ_BLOCKS         ReadFunc;
  //
  EFI_PEI_RECOVERY_BLOCK_IO_PPI  *BlockIo;
  EFI_PEI_RECOVERY_BLOCK_IO2_PPI *BlockIo2;
  UINT8                          PhysicalDevNo;
} PEI_FAT_BLOCK_DEVICE;

//
// the Volume structure
//
typedef struct {

  UINTN         BlockDeviceNo;
  UINTN         VolumeNo;
  UINT64        VolumeSize;
  UINTN         MaxCluster;
  CHAR16        VolumeLabel[FAT_MAX_FILE_NAME_LENGTH];
  PEI_FAT_TYPE  FatType;
  UINT64        FatPos;
  UINT32        SectorSize;
  UINT32        ClusterSize;
  UINT64        FirstClusterPos;
  UINT64        RootDirPos;
  UINT32        RootEntries;
  UINT32        RootDirCluster;

} PEI_FAT_VOLUME;

//
// File instance
//
typedef struct {

  PEI_FAT_VOLUME  *Volume;
  CHAR16          FileName[FAT_MAX_FILE_NAME_LENGTH];

  BOOLEAN         IsFixedRootDir;

  UINT32          StartingCluster;
  UINT32          CurrentPos;
  UINT32          StraightReadAmount;
  UINT32          CurrentCluster;

  UINT8           Attributes;
  UINT32          FileSize;

} PEI_FAT_FILE;

//
// Cache Buffer
//
typedef struct {

  BOOLEAN Valid;
  UINTN   BlockDeviceNo;
  UINT64  Lba;
  UINT32  Lru;
  UINT64  Buffer[PEI_FAT_MAX_BLOCK_SIZE / 8];
  UINTN   Size;

} PEI_FAT_CACHE_BUFFER;

//
// Private Data.
// This structure abstracts the whole memory usage in FAT PEIM.
// The entry point routine will get a chunk of memory (by whatever
// means) whose size is sizeof(PEI_FAT_PRIVATE_DATA), which is clean
// in both 32 and 64 bit environment. The boundary of the memory chunk
// should be 64bit aligned.
//
#define PEI_FAT_PRIVATE_DATA_SIGNATURE  SIGNATURE_32 ('p', 'f', 'a', 't')

typedef struct {

  UINTN                               Signature;
  EFI_PEI_DEVICE_RECOVERY_MODULE_PPI  DeviceRecoveryPpi;
  EFI_PEI_PPI_DESCRIPTOR              PpiDescriptor;
  EFI_PEI_NOTIFY_DESCRIPTOR           NotifyDescriptor[2];

  UINT8                               UnicodeCaseMap[0x300];
  CHAR8                               *EngUpperMap;
  CHAR8                               *EngLowerMap;
  CHAR8                               *EngInfoMap;

  UINT64                              BlockData[PEI_FAT_MAX_BLOCK_SIZE / 8];
  UINTN                               BlockDeviceCount;
  PEI_FAT_BLOCK_DEVICE                BlockDevice[PEI_FAT_MAX_BLOCK_DEVICE];
  UINTN                               VolumeCount;
  PEI_FAT_VOLUME                      Volume[PEI_FAT_MAX_VOLUME];
  PEI_FAT_FILE                        File;
  PEI_FAT_CACHE_BUFFER                CacheBuffer[PEI_FAT_CACHE_SIZE];

} PEI_FAT_PRIVATE_DATA;

#define PEI_FAT_PRIVATE_DATA_FROM_THIS(a) \
  CR (a,  PEI_FAT_PRIVATE_DATA, DeviceRecoveryPpi, PEI_FAT_PRIVATE_DATA_SIGNATURE)

//
// Extract INT32 from char array
//
#define UNPACK_INT32(a) \
  (INT32) ((((UINT8 *) a)[0] << 0) | (((UINT8 *) a)[1] << 8) | (((UINT8 *) a)[2] << 16) | (((UINT8 *) a)[3] << 24))

//
// Extract UINT32 from char array
//
#define UNPACK_UINT32(a) \
  (UINT32) ((((UINT8 *) a)[0] << 0) | (((UINT8 *) a)[1] << 8) | (((UINT8 *) a)[2] << 16) | (((UINT8 *) a)[3] << 24))


//
// API functions
//

/**
  Finds the recovery file on a FAT volume.
  This function finds the the recovery file named FileName on a specified FAT volume and returns
  its FileHandle pointer.

  @param  PrivateData             Global memory map for accessing global 
                                  variables. 
  @param  VolumeIndex             The index of the volume. 
  @param  FileName                The recovery file name to find. 
  @param  Handle                  The output file handle. 

  @retval EFI_DEVICE_ERROR        Some error occured when operating the FAT 
                                  volume. 
  @retval EFI_NOT_FOUND           The recovery file was not found. 
  @retval EFI_SUCCESS             The recovery file was successfully found on the 
                                  FAT volume.

**/
EFI_STATUS
FindRecoveryFile (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN  UINTN                 VolumeIndex,
  IN  CHAR16                *FileName,
  OUT PEI_FILE_HANDLE       *Handle
  );


/**
  Returns the number of DXE capsules residing on the device.
  This function, by whatever mechanism, searches for DXE capsules from the associated device and
  returns the number and maximum size in bytes of the capsules discovered.Entry 1 is assumed to be
  the highest load priority and entry N is assumed to be the lowest priority.

  @param  PeiServices             General-purpose services that are available to 
                                  every PEIM. 
  @param  This                    Indicates the 
                                  EFI_PEI_DEVICE_RECOVERY_MODULE_PPI instance. 
  @param  NumberRecoveryCapsules  Pointer to a caller-allocated UINTN.On output, 
                                  *NumberRecoveryCapsules contains the number of 
                                  recovery capsule images available for retrieval 
                                  from this PEIM instance. 

  @retval EFI_SUCCESS             The function completed successfully.

**/
EFI_STATUS
EFIAPI
GetNumberRecoveryCapsules (
  IN EFI_PEI_SERVICES                               **PeiServices,
  IN EFI_PEI_DEVICE_RECOVERY_MODULE_PPI             *This,
  OUT UINTN                                         *NumberRecoveryCapsules
  );


/**
  Returns the size and type of the requested recovery capsule.
  This function returns the size and type of the capsule specified by CapsuleInstance.

  @param  PeiServices             General-purpose services that are available to 
                                  every PEIM. 
  @param  This                    Indicates the 
                                  EFI_PEI_DEVICE_RECOVERY_MODULE_PPI instance. 
  @param  CapsuleInstance         Specifies for which capsule instance to 
                                  retrieve the information.T his parameter must 
                                  be between one and the value returned by 
                                  GetNumberRecoveryCapsules() in 
                                  NumberRecoveryCapsules. 
  @param  Size                    A pointer to a caller-allocated UINTN in which 
                                  the size of the requested recovery module is 
                                  returned. 
  @param  CapsuleType             A pointer to a caller-allocated EFI_GUID in 
                                  which the type of the requested recovery 
                                  capsule is returned.T he semantic meaning of 
                                  the value returned is defined by the 
                                  implementation. 

  @retval EFI_SUCCESS             The capsule type and size were retrieved. 
  @retval EFI_INVALID_PARAMETER   The input CapsuleInstance does not match any 
                                  discovered recovery capsule.

**/
EFI_STATUS
EFIAPI
GetRecoveryCapsuleInfo (
  IN  EFI_PEI_SERVICES                              **PeiServices,
  IN  EFI_PEI_DEVICE_RECOVERY_MODULE_PPI            *This,
  IN  UINTN                                         CapsuleInstance,
  OUT UINTN                                         *Size,
  OUT EFI_GUID                                      *CapsuleType
  );


/**
  Loads a DXE capsule from some media into memory.

  This function, by whatever mechanism, retrieves a DXE capsule from some device
  and loads it into memory. Note that the published interface is device neutral.

  @param[in]     PeiServices       General-purpose services that are available 
                                   to every PEIM
  @param[in]     This              Indicates the EFI_PEI_DEVICE_RECOVERY_MODULE_PPI
                                   instance.
  @param[in]     CapsuleInstance   Specifies which capsule instance to retrieve.
  @param[out]    Buffer            Specifies a caller-allocated buffer in which 
                                   the requested recovery capsule will be returned.

  @retval EFI_SUCCESS        The capsule was loaded correctly.
  @retval EFI_DEVICE_ERROR   A device error occurred.
  @retval EFI_NOT_FOUND      A requested recovery DXE capsule cannot be found.

**/
EFI_STATUS
EFIAPI
LoadRecoveryCapsule (
  IN EFI_PEI_SERVICES                             **PeiServices,
  IN EFI_PEI_DEVICE_RECOVERY_MODULE_PPI           *This,
  IN UINTN                                        CapsuleInstance,
  OUT VOID                                        *Buffer
  );


/**
  This version is different from the version in Unicode collation
  protocol in that this version strips off trailing blanks.
  Converts an 8.3 FAT file name using an OEM character set
  to a Null-terminated Unicode string.
  Here does not expand DBCS FAT chars.

  @param  FatSize           The size of the string Fat in bytes. 
  @param  Fat               A pointer to a Null-terminated string that contains 
                            an 8.3 file name using an OEM character set. 
  @param  Str               A pointer to a Null-terminated Unicode string. The 
                            string must be allocated in advance to hold FatSize 
                            Unicode characters

**/
VOID
EngFatToStr (
  IN UINTN                            FatSize,
  IN CHAR8                            *Fat,
  OUT CHAR16                          *Str
  );


/**
  Performs a case-insensitive comparison of two Null-terminated Unicode strings.

  @param  PrivateData       Global memory map for accessing global variables 
  @param  Str1              First string to perform case insensitive comparison. 
  @param  Str2              Second string to perform case insensitive comparison.

**/
BOOLEAN
EngStriColl (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN CHAR16                 *Str1,
  IN CHAR16                 *Str2
  );


/**
  Reads a block of data from the block device by calling
  underlying Block I/O service.

  @param  PrivateData       Global memory map for accessing global variables 
  @param  BlockDeviceNo     The index for the block device number. 
  @param  Lba               The logic block address to read data from. 
  @param  BufferSize        The size of data in byte to read. 
  @param  Buffer            The buffer of the 

  @retval EFI_DEVICE_ERROR  The specified block device number exceeds the maximum 
                            device number. 
  @retval EFI_DEVICE_ERROR  The maximum address has exceeded the maximum address 
                            of the block device.

**/
EFI_STATUS
FatReadBlock (
  IN  PEI_FAT_PRIVATE_DATA   *PrivateData,
  IN  UINTN                  BlockDeviceNo,
  IN  EFI_PEI_LBA            Lba,
  IN  UINTN                  BufferSize,
  OUT VOID                   *Buffer
  );


/**
  Check if there is a valid FAT in the corresponding Block device
  of the volume and if yes, fill in the relevant fields for the
  volume structure. Note there should be a valid Block device number
  already set.

  @param  PrivateData            Global memory map for accessing global 
                                 variables. 
  @param  Volume                 On input, the BlockDeviceNumber field of the 
                                 Volume  should be a valid value. On successful 
                                 output, all  fields except the VolumeNumber 
                                 field is initialized. 

  @retval EFI_SUCCESS            A FAT is found and the volume structure is 
                                 initialized. 
  @retval EFI_NOT_FOUND          There is no FAT on the corresponding device. 
  @retval EFI_DEVICE_ERROR       There is something error while accessing device.

**/
EFI_STATUS
FatGetBpbInfo (
  IN      PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN OUT  PEI_FAT_VOLUME        *Volume
  );


/**
  Gets the next cluster in the cluster chain.

  @param  PrivateData            Global memory map for accessing global variables 
  @param  Volume                 The volume 
  @param  Cluster                The cluster 
  @param  NextCluster            The cluster number of the next cluster 

  @retval EFI_SUCCESS            The address is got 
  @retval EFI_INVALID_PARAMETER  ClusterNo exceeds the MaxCluster of the volume. 
  @retval EFI_DEVICE_ERROR       Read disk error

**/
EFI_STATUS
FatGetNextCluster (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN  PEI_FAT_VOLUME        *Volume,
  IN  UINT32                Cluster,
  OUT UINT32                *NextCluster
  );


/**
  Disk reading.

  @param  PrivateData       the global memory map; 
  @param  BlockDeviceNo     the block device to read; 
  @param  StartingAddress   the starting address. 
  @param  Size              the amount of data to read. 
  @param  Buffer            the buffer holding the data 

  @retval EFI_SUCCESS       The function completed successfully.
  @retval EFI_DEVICE_ERROR  Something error.

**/
EFI_STATUS
FatReadDisk (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN  UINTN                 BlockDeviceNo,
  IN  UINT64                StartingAddress,
  IN  UINTN                 Size,
  OUT VOID                  *Buffer
  );


/**
  Set a file's CurrentPos and CurrentCluster, then compute StraightReadAmount.

  @param  PrivateData            the global memory map 
  @param  File                   the file 
  @param  Pos                    the Position which is offset from the file's 
                                 CurrentPos 

  @retval EFI_SUCCESS            Success. 
  @retval EFI_INVALID_PARAMETER  Pos is beyond file's size. 
  @retval EFI_DEVICE_ERROR       Something error while accessing media.

**/
EFI_STATUS
FatSetFilePos (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN  PEI_FAT_FILE          *File,
  IN  UINT32                Pos
  );


/**
  Reads file data. Updates the file's CurrentPos.

  @param  PrivateData            Global memory map for accessing global variables 
  @param  File                   The file. 
  @param  Size                   The amount of data to read. 
  @param  Buffer                 The buffer storing the data. 

  @retval EFI_SUCCESS            The data is read. 
  @retval EFI_INVALID_PARAMETER  File is invalid. 
  @retval EFI_DEVICE_ERROR       Something error while accessing media.

**/
EFI_STATUS
FatReadFile (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN  PEI_FAT_FILE          *File,
  IN  UINTN                 Size,
  OUT VOID                  *Buffer
  );


/**
  This function reads the next item in the parent directory and
  initializes the output parameter SubFile (CurrentPos is initialized to 0).
  The function updates the CurrentPos of the parent dir to after the item read.
  If no more items were found, the function returns EFI_NOT_FOUND.

  @param  PrivateData            Global memory map for accessing global variables 
  @param  ParentDir              The parent directory. 
  @param  SubFile                The File structure containing the sub file that 
                                 is caught. 

  @retval EFI_SUCCESS            The next sub file is obtained. 
  @retval EFI_INVALID_PARAMETER  The ParentDir is not a directory. 
  @retval EFI_NOT_FOUND          No more sub file exists. 
  @retval EFI_DEVICE_ERROR       Something error while accessing media.

**/
EFI_STATUS
FatReadNextDirectoryEntry (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData,
  IN  PEI_FAT_FILE          *ParentDir,
  OUT PEI_FAT_FILE          *SubFile
  );


/**
  This function finds partitions (logical devices) in physical block devices.

  @param  PrivateData       Global memory map for accessing global variables.

**/
VOID
FatFindPartitions (
  IN  PEI_FAT_PRIVATE_DATA  *PrivateData
  );

#endif // _FAT_PEIM_H_