blob: 2b5ba6c1081a43abbdc939e74f08a8b8301e48d3 [file] [log] [blame]
/** @file
EFI PCAT ISA ACPI Driver for a Generic PC Platform
Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "PcatIsaAcpi.h"
//
// PcatIsaAcpi Driver Binding Protocol
//
EFI_DRIVER_BINDING_PROTOCOL gPcatIsaAcpiDriverBinding = {
PcatIsaAcpiDriverBindingSupported,
PcatIsaAcpiDriverBindingStart,
PcatIsaAcpiDriverBindingStop,
0xa,
NULL,
NULL
};
/**
the entry point of the PcatIsaAcpi driver.
@param ImageHandle Handle for driver image
@param SystemTable Point to EFI_SYSTEM_TABLE
@return Sucess or not for installing driver binding protocol
**/
EFI_STATUS
EFIAPI
PcatIsaAcpiDriverEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
return EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&gPcatIsaAcpiDriverBinding,
ImageHandle,
&gPcatIsaAcpiComponentName,
&gPcatIsaAcpiComponentName2
);
}
/**
ControllerDriver Protocol Method
@param This Driver Binding protocol instance pointer.
@param Controller Handle of device to test.
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver supports this device.
@retval other This driver does not support this device.
**/
EFI_STATUS
EFIAPI
PcatIsaAcpiDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_PCI_IO_PROTOCOL *PciIo;
PCI_TYPE00 Pci;
UINTN SegmentNumber;
UINTN BusNumber;
UINTN DeviceNumber;
UINTN FunctionNumber;
//
// Get PciIo protocol instance
//
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID**)&PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR(Status)) {
return Status;
}
Status = PciIo->Pci.Read (
PciIo,
EfiPciIoWidthUint32,
0,
sizeof(Pci) / sizeof(UINT32),
&Pci);
if (!EFI_ERROR (Status)) {
Status = EFI_UNSUPPORTED;
if ((Pci.Hdr.Command & 0x03) == 0x03) {
if (Pci.Hdr.ClassCode[2] == PCI_CLASS_BRIDGE) {
//
// See if this is a standard PCI to ISA Bridge from the Base Code and Class Code
//
if (Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA) {
Status = EFI_SUCCESS;
}
//
// See if this is an Intel PCI to ISA bridge in Positive Decode Mode
//
if (Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA_PDECODE &&
Pci.Hdr.VendorId == 0x8086 ) {
//
// See if this is on Function #0 to avoid false positives on
// PCI_CLASS_BRIDGE_OTHER that has the same value as
// PCI_CLASS_BRIDGE_ISA_PDECODE
//
Status = PciIo->GetLocation (
PciIo,
&SegmentNumber,
&BusNumber,
&DeviceNumber,
&FunctionNumber
);
if (!EFI_ERROR (Status) && FunctionNumber == 0) {
Status = EFI_SUCCESS;
} else {
Status = EFI_UNSUPPORTED;
}
}
}
}
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
Install EFI_ISA_ACPI_PROTOCOL.
@param This Driver Binding protocol instance pointer.
@param ControllerHandle Handle of device to bind driver to.
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver is added to ControllerHandle
@retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
PcatIsaAcpiDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_PCI_IO_PROTOCOL *PciIo;
PCAT_ISA_ACPI_DEV *PcatIsaAcpiDev;
UINT64 Supports;
BOOLEAN Enabled;
Enabled = FALSE;
Supports = 0;
PcatIsaAcpiDev = NULL;
//
// Open the PCI I/O Protocol Interface
//
PciIo = NULL;
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID**)&PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
goto Done;
}
//
// Get supported PCI attributes
//
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSupported,
0,
&Supports
);
if (EFI_ERROR (Status)) {
goto Done;
}
Supports &= (UINT64) (EFI_PCI_IO_ATTRIBUTE_ISA_IO | EFI_PCI_IO_ATTRIBUTE_ISA_IO_16);
if (Supports == 0 || Supports == (EFI_PCI_IO_ATTRIBUTE_ISA_IO | EFI_PCI_IO_ATTRIBUTE_ISA_IO_16)) {
Status = EFI_UNSUPPORTED;
goto Done;
}
Enabled = TRUE;
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationEnable,
EFI_PCI_DEVICE_ENABLE | Supports | EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO,
NULL
);
if (EFI_ERROR (Status)) {
goto Done;
}
//
// Allocate memory for the PCAT ISA ACPI Device structure
//
PcatIsaAcpiDev = NULL;
Status = gBS->AllocatePool (
EfiBootServicesData,
sizeof(PCAT_ISA_ACPI_DEV),
(VOID**)&PcatIsaAcpiDev
);
if (EFI_ERROR (Status)) {
goto Done;
}
//
// Initialize the PCAT ISA ACPI Device structure
//
PcatIsaAcpiDev->Signature = PCAT_ISA_ACPI_DEV_SIGNATURE;
PcatIsaAcpiDev->Handle = Controller;
PcatIsaAcpiDev->PciIo = PciIo;
//
// Initialize PcatIsaAcpiDeviceList
//
InitializePcatIsaAcpiDeviceList ();
//
// IsaAcpi interface
//
(PcatIsaAcpiDev->IsaAcpi).DeviceEnumerate = IsaDeviceEnumerate;
(PcatIsaAcpiDev->IsaAcpi).SetPower = IsaDeviceSetPower;
(PcatIsaAcpiDev->IsaAcpi).GetCurResource = IsaGetCurrentResource;
(PcatIsaAcpiDev->IsaAcpi).GetPosResource = IsaGetPossibleResource;
(PcatIsaAcpiDev->IsaAcpi).SetResource = IsaSetResource;
(PcatIsaAcpiDev->IsaAcpi).EnableDevice = IsaEnableDevice;
(PcatIsaAcpiDev->IsaAcpi).InitDevice = IsaInitDevice;
(PcatIsaAcpiDev->IsaAcpi).InterfaceInit = IsaInterfaceInit;
//
// Install the ISA ACPI Protocol interface
//
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiIsaAcpiProtocolGuid, &PcatIsaAcpiDev->IsaAcpi,
NULL
);
Done:
if (EFI_ERROR (Status)) {
if (PciIo != NULL && Enabled) {
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationDisable,
EFI_PCI_DEVICE_ENABLE | Supports | EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO,
NULL
);
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
if (PcatIsaAcpiDev != NULL) {
gBS->FreePool (PcatIsaAcpiDev);
}
return Status;
}
return EFI_SUCCESS;
}
/**
Stop this driver on ControllerHandle. Support stopping any child handles
created by this driver.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
children is zero stop the entire bus driver.
@param ChildHandleBuffer List of Child Handles to Stop.
@retval EFI_SUCCESS This driver is removed ControllerHandle
@retval other This driver was not removed from this device
**/
EFI_STATUS
EFIAPI
PcatIsaAcpiDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
EFI_ISA_ACPI_PROTOCOL *IsaAcpi;
PCAT_ISA_ACPI_DEV *PcatIsaAcpiDev;
UINT64 Supports;
//
// Get the ISA ACPI Protocol Interface
//
Status = gBS->OpenProtocol (
Controller,
&gEfiIsaAcpiProtocolGuid,
(VOID**)&IsaAcpi,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the PCAT ISA ACPI Device structure from the ISA ACPI Protocol
//
PcatIsaAcpiDev = PCAT_ISA_ACPI_DEV_FROM_THIS (IsaAcpi);
//
// Get supported PCI attributes
//
Status = PcatIsaAcpiDev->PciIo->Attributes (
PcatIsaAcpiDev->PciIo,
EfiPciIoAttributeOperationSupported,
0,
&Supports
);
if (EFI_ERROR (Status)) {
return Status;
}
Supports &= (UINT64) (EFI_PCI_IO_ATTRIBUTE_ISA_IO | EFI_PCI_IO_ATTRIBUTE_ISA_IO_16);
PcatIsaAcpiDev->PciIo->Attributes (
PcatIsaAcpiDev->PciIo,
EfiPciIoAttributeOperationDisable,
EFI_PCI_DEVICE_ENABLE | Supports | EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO,
NULL
);
//
// Uninstall protocol interface: EFI_ISA_ACPI_PROTOCOL
//
Status = gBS->UninstallProtocolInterface (
Controller,
&gEfiIsaAcpiProtocolGuid, &PcatIsaAcpiDev->IsaAcpi
);
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->FreePool (PcatIsaAcpiDev);
return EFI_SUCCESS;
}