| /**@file | |
| Copyright (c) 2006 - 2010, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| Module Name: | |
| WinNtSerialIo.c | |
| Abstract: | |
| Our DriverBinding member functions operate on the handles | |
| created by the NT Bus driver. | |
| Handle(1) - WinNtIo - DevicePath(1) | |
| If a serial port is added to the system this driver creates a new handle. | |
| The new handle is required, since the serial device must add an UART device | |
| pathnode. | |
| Handle(2) - SerialIo - DevicePath(1)\UART | |
| The driver then adds a gEfiWinNtSerialPortGuid as a protocol to Handle(1). | |
| The instance data for this protocol is the private data used to create | |
| Handle(2). | |
| Handle(1) - WinNtIo - DevicePath(1) - WinNtSerialPort | |
| If the driver is unloaded Handle(2) is removed from the system and | |
| gEfiWinNtSerialPortGuid is removed from Handle(1). | |
| Note: Handle(1) is any handle created by the Win NT Bus driver that is passed | |
| into the DriverBinding member functions of this driver. This driver requires | |
| a Handle(1) to contain a WinNtIo protocol, a DevicePath protocol, and | |
| the TypeGuid in the WinNtIo must be gEfiWinNtSerialPortGuid. | |
| If Handle(1) contains a gEfiWinNtSerialPortGuid protocol then the driver is | |
| loaded on the device. | |
| **/ | |
| #include "WinNtSerialIo.h" | |
| EFI_DRIVER_BINDING_PROTOCOL gWinNtSerialIoDriverBinding = { | |
| WinNtSerialIoDriverBindingSupported, | |
| WinNtSerialIoDriverBindingStart, | |
| WinNtSerialIoDriverBindingStop, | |
| 0xa, | |
| NULL, | |
| NULL | |
| }; | |
| // | |
| // List of supported baud rate | |
| // | |
| UINT64 mBaudRateCurrentSupport[] = {50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2000, 2400, 3600, 4800, 7200, 9600, 19200, 38400, 57600, 115200, SERIAL_PORT_MAX_BAUD_RATE + 1}; | |
| /** | |
| Check the device path node whether it's the Flow Control node or not. | |
| @param[in] FlowControl The device path node to be checked. | |
| @retval TRUE It's the Flow Control node. | |
| @retval FALSE It's not. | |
| **/ | |
| BOOLEAN | |
| IsUartFlowControlNode ( | |
| IN UART_FLOW_CONTROL_DEVICE_PATH *FlowControl | |
| ) | |
| { | |
| return (BOOLEAN) ( | |
| (DevicePathType (FlowControl) == MESSAGING_DEVICE_PATH) && | |
| (DevicePathSubType (FlowControl) == MSG_VENDOR_DP) && | |
| (CompareGuid (&FlowControl->Guid, &gEfiUartDevicePathGuid)) | |
| ); | |
| } | |
| /** | |
| Check the device path node whether it contains Flow Control node or not. | |
| @param[in] DevicePath The device path to be checked. | |
| @retval TRUE It contains the Flow Control node. | |
| @retval FALSE It doesn't. | |
| **/ | |
| BOOLEAN | |
| ContainsFlowControl ( | |
| IN EFI_DEVICE_PATH_PROTOCOL *DevicePath | |
| ) | |
| { | |
| while (!IsDevicePathEnd (DevicePath)) { | |
| if (IsUartFlowControlNode ((UART_FLOW_CONTROL_DEVICE_PATH *) DevicePath)) { | |
| return TRUE; | |
| } | |
| DevicePath = NextDevicePathNode (DevicePath); | |
| } | |
| return FALSE; | |
| } | |
| /** | |
| The user Entry Point for module WinNtSerialIo. The user code starts with this function. | |
| @param[in] ImageHandle The firmware allocated handle for the EFI image. | |
| @param[in] SystemTable A pointer to the EFI System Table. | |
| @retval EFI_SUCCESS The entry point is executed successfully. | |
| @retval other Some error occurs when executing this entry point. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| InitializeWinNtSerialIo( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| // | |
| // Install driver model protocol(s). | |
| // | |
| Status = EfiLibInstallDriverBindingComponentName2 ( | |
| ImageHandle, | |
| SystemTable, | |
| &gWinNtSerialIoDriverBinding, | |
| ImageHandle, | |
| &gWinNtSerialIoComponentName, | |
| &gWinNtSerialIoComponentName2 | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Handle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Handle - add argument and description to function comment | |
| // TODO: RemainingDevicePath - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EFI_WIN_NT_IO_PROTOCOL *WinNtIo; | |
| UART_DEVICE_PATH *UartNode; | |
| EFI_DEVICE_PATH_PROTOCOL *DevicePath; | |
| UART_FLOW_CONTROL_DEVICE_PATH *FlowControlNode; | |
| EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer; | |
| UINTN EntryCount; | |
| UINTN Index; | |
| // | |
| // Check RemainingDevicePath validation | |
| // | |
| if (RemainingDevicePath != NULL) { | |
| // | |
| // Check if RemainingDevicePath is the End of Device Path Node, | |
| // if yes, go on checking other conditions | |
| // | |
| if (!IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // If RemainingDevicePath isn't the End of Device Path Node, | |
| // check its validation | |
| // | |
| Status = EFI_UNSUPPORTED; | |
| UartNode = (UART_DEVICE_PATH *) RemainingDevicePath; | |
| if (UartNode->Header.Type != MESSAGING_DEVICE_PATH || | |
| UartNode->Header.SubType != MSG_UART_DP || | |
| DevicePathNodeLength((EFI_DEVICE_PATH_PROTOCOL *)UartNode) != sizeof(UART_DEVICE_PATH)) { | |
| goto Error; | |
| } | |
| if ( UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) { | |
| goto Error; | |
| } | |
| if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) { | |
| goto Error; | |
| } | |
| if (UartNode->DataBits < 5 || UartNode->DataBits > 8) { | |
| goto Error; | |
| } | |
| if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) { | |
| goto Error; | |
| } | |
| if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) { | |
| goto Error; | |
| } | |
| if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) { | |
| goto Error; | |
| } | |
| FlowControlNode = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (UartNode); | |
| if (IsUartFlowControlNode (FlowControlNode)) { | |
| // | |
| // If the second node is Flow Control Node, | |
| // return error when it request other than hardware flow control. | |
| // | |
| if ((FlowControlNode->FlowControlMap & ~UART_FLOW_CONTROL_HARDWARE) != 0) { | |
| goto Error; | |
| } | |
| } | |
| } | |
| } | |
| // | |
| // Open the IO Abstraction(s) needed to perform the supported test | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| (VOID **) &WinNtIo, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (Status == EFI_ALREADY_STARTED) { | |
| if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // If RemainingDevicePath is NULL or is the End of Device Path Node | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // When the driver has produced device path with flow control node but RemainingDevicePath only contains UART node, | |
| // return unsupported, and vice versa. | |
| // | |
| Status = gBS->OpenProtocolInformation ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| &OpenInfoBuffer, | |
| &EntryCount | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| for (Index = 0; Index < EntryCount; Index++) { | |
| if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) { | |
| Status = gBS->OpenProtocol ( | |
| OpenInfoBuffer[Index].ControllerHandle, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &DevicePath, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status) && | |
| (ContainsFlowControl (RemainingDevicePath) ^ ContainsFlowControl (DevicePath))) { | |
| Status = EFI_UNSUPPORTED; | |
| } | |
| break; | |
| } | |
| } | |
| FreePool (OpenInfoBuffer); | |
| return Status; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Close the I/O Abstraction(s) used to perform the supported test | |
| // | |
| gBS->CloseProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Handle | |
| ); | |
| // | |
| // Open the EFI Device Path protocol needed to perform the supported test | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &ParentDevicePath, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (Status == EFI_ALREADY_STARTED) { | |
| return EFI_SUCCESS; | |
| } | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Close protocol, don't use device path protocol in the Support() function | |
| // | |
| gBS->CloseProtocol ( | |
| Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| Handle | |
| ); | |
| // | |
| // Make sure that the WinNt Thunk Protocol is valid | |
| // | |
| if (WinNtIo->WinNtThunk->Signature != EFI_WIN_NT_THUNK_PROTOCOL_SIGNATURE) { | |
| Status = EFI_UNSUPPORTED; | |
| goto Error; | |
| } | |
| // | |
| // Check the GUID to see if this is a handle type the driver supports | |
| // | |
| if (!CompareGuid (WinNtIo->TypeGuid, &gEfiWinNtSerialPortGuid)) { | |
| Status = EFI_UNSUPPORTED; | |
| goto Error; | |
| } | |
| return EFI_SUCCESS; | |
| Error: | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Handle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: This - add argument and description to function comment | |
| // TODO: Handle - add argument and description to function comment | |
| // TODO: RemainingDevicePath - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| EFI_WIN_NT_IO_PROTOCOL *WinNtIo; | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| HANDLE NtHandle; | |
| UART_DEVICE_PATH UartNode; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer; | |
| UINTN EntryCount; | |
| UINTN Index; | |
| EFI_SERIAL_IO_PROTOCOL *SerialIo; | |
| UART_DEVICE_PATH *Uart; | |
| UINT32 FlowControlMap; | |
| UART_FLOW_CONTROL_DEVICE_PATH *FlowControl; | |
| EFI_DEVICE_PATH_PROTOCOL *TempDevicePath; | |
| UINT32 Control; | |
| Private = NULL; | |
| NtHandle = INVALID_HANDLE_VALUE; | |
| // | |
| // Get the Parent Device Path | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID **) &ParentDevicePath, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { | |
| return Status; | |
| } | |
| // | |
| // Grab the IO abstraction we need to get any work done | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| (VOID **) &WinNtIo, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { | |
| gBS->CloseProtocol ( | |
| Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| Handle | |
| ); | |
| return Status; | |
| } | |
| if (Status == EFI_ALREADY_STARTED) { | |
| if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // If RemainingDevicePath is NULL or is the End of Device Path Node | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Make sure a child handle does not already exist. This driver can only | |
| // produce one child per serial port. | |
| // | |
| Status = gBS->OpenProtocolInformation ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| &OpenInfoBuffer, | |
| &EntryCount | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = EFI_ALREADY_STARTED; | |
| for (Index = 0; Index < EntryCount; Index++) { | |
| if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) { | |
| Status = gBS->OpenProtocol ( | |
| OpenInfoBuffer[Index].ControllerHandle, | |
| &gEfiSerialIoProtocolGuid, | |
| (VOID **) &SerialIo, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| Uart = (UART_DEVICE_PATH *) RemainingDevicePath; | |
| Status = SerialIo->SetAttributes ( | |
| SerialIo, | |
| Uart->BaudRate, | |
| SerialIo->Mode->ReceiveFifoDepth, | |
| SerialIo->Mode->Timeout, | |
| (EFI_PARITY_TYPE) Uart->Parity, | |
| Uart->DataBits, | |
| (EFI_STOP_BITS_TYPE) Uart->StopBits | |
| ); | |
| FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart); | |
| if (!EFI_ERROR (Status) && IsUartFlowControlNode (FlowControl)) { | |
| Status = SerialIo->GetControl (SerialIo, &Control); | |
| if (!EFI_ERROR (Status)) { | |
| if (FlowControl->FlowControlMap == UART_FLOW_CONTROL_HARDWARE) { | |
| Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; | |
| } else { | |
| Control &= ~EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; | |
| } | |
| // | |
| // Clear the bits that are not allowed to pass to SetControl | |
| // | |
| Control &= (EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY | | |
| EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | | |
| EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE); | |
| Status = SerialIo->SetControl (SerialIo, Control); | |
| } | |
| } | |
| } | |
| break; | |
| } | |
| } | |
| FreePool (OpenInfoBuffer); | |
| return Status; | |
| } | |
| FlowControl = NULL; | |
| FlowControlMap = 0; | |
| if (RemainingDevicePath == NULL) { | |
| // | |
| // Build the device path by appending the UART node to the ParentDevicePath | |
| // from the WinNtIo handle. The Uart setings are zero here, since | |
| // SetAttribute() will update them to match the default setings. | |
| // | |
| ZeroMem (&UartNode, sizeof (UART_DEVICE_PATH)); | |
| UartNode.Header.Type = MESSAGING_DEVICE_PATH; | |
| UartNode.Header.SubType = MSG_UART_DP; | |
| SetDevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &UartNode, sizeof (UART_DEVICE_PATH)); | |
| } else if (!IsDevicePathEnd (RemainingDevicePath)) { | |
| // | |
| // If RemainingDevicePath isn't the End of Device Path Node, | |
| // only scan the specified device by RemainingDevicePath | |
| // | |
| // | |
| // Match the configuration of the RemainingDevicePath. IsHandleSupported() | |
| // already checked to make sure the RemainingDevicePath contains settings | |
| // that we can support. | |
| // | |
| CopyMem (&UartNode, RemainingDevicePath, sizeof (UART_DEVICE_PATH)); | |
| FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (RemainingDevicePath); | |
| if (IsUartFlowControlNode (FlowControl)) { | |
| FlowControlMap = FlowControl->FlowControlMap; | |
| } else { | |
| FlowControl = NULL; | |
| } | |
| } else { | |
| // | |
| // If RemainingDevicePath is the End of Device Path Node, | |
| // skip enumerate any device and return EFI_SUCESSS | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Check to see if we can access the hardware device. If it's Open in NT we | |
| // will not get access. | |
| // | |
| NtHandle = WinNtIo->WinNtThunk->CreateFile ( | |
| WinNtIo->EnvString, | |
| GENERIC_READ | GENERIC_WRITE, | |
| 0, | |
| NULL, | |
| OPEN_EXISTING, | |
| 0, | |
| NULL | |
| ); | |
| if (NtHandle == INVALID_HANDLE_VALUE) { | |
| Status = EFI_DEVICE_ERROR; | |
| goto Error; | |
| } | |
| // | |
| // Construct Private data | |
| // | |
| Private = AllocatePool (sizeof (WIN_NT_SERIAL_IO_PRIVATE_DATA)); | |
| if (Private == NULL) { | |
| goto Error; | |
| } | |
| // | |
| // This signature must be valid before any member function is called | |
| // | |
| Private->Signature = WIN_NT_SERIAL_IO_PRIVATE_DATA_SIGNATURE; | |
| Private->NtHandle = NtHandle; | |
| Private->ControllerHandle = Handle; | |
| Private->Handle = NULL; | |
| Private->WinNtThunk = WinNtIo->WinNtThunk; | |
| Private->ParentDevicePath = ParentDevicePath; | |
| Private->ControllerNameTable = NULL; | |
| Private->SoftwareLoopbackEnable = FALSE; | |
| Private->HardwareLoopbackEnable = FALSE; | |
| Private->HardwareFlowControl = (BOOLEAN) (FlowControlMap == UART_FLOW_CONTROL_HARDWARE); | |
| Private->Fifo.First = 0; | |
| Private->Fifo.Last = 0; | |
| Private->Fifo.Surplus = SERIAL_MAX_BUFFER_SIZE; | |
| CopyMem (&Private->UartDevicePath, &UartNode, sizeof (UART_DEVICE_PATH)); | |
| AddUnicodeString2 ( | |
| "eng", | |
| gWinNtSerialIoComponentName.SupportedLanguages, | |
| &Private->ControllerNameTable, | |
| WinNtIo->EnvString, | |
| TRUE | |
| ); | |
| AddUnicodeString2 ( | |
| "en", | |
| gWinNtSerialIoComponentName2.SupportedLanguages, | |
| &Private->ControllerNameTable, | |
| WinNtIo->EnvString, | |
| FALSE | |
| ); | |
| Private->SerialIo.Revision = SERIAL_IO_INTERFACE_REVISION; | |
| Private->SerialIo.Reset = WinNtSerialIoReset; | |
| Private->SerialIo.SetAttributes = WinNtSerialIoSetAttributes; | |
| Private->SerialIo.SetControl = WinNtSerialIoSetControl; | |
| Private->SerialIo.GetControl = WinNtSerialIoGetControl; | |
| Private->SerialIo.Write = WinNtSerialIoWrite; | |
| Private->SerialIo.Read = WinNtSerialIoRead; | |
| Private->SerialIo.Mode = &Private->SerialIoMode; | |
| // | |
| // Build the device path by appending the UART node to the ParentDevicePath | |
| // from the WinNtIo handle. The Uart setings are zero here, since | |
| // SetAttribute() will update them to match the current setings. | |
| // | |
| Private->DevicePath = AppendDevicePathNode ( | |
| ParentDevicePath, | |
| (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath | |
| ); | |
| // | |
| // Only produce the FlowControl node when remaining device path has it | |
| // | |
| if (FlowControl != NULL) { | |
| TempDevicePath = Private->DevicePath; | |
| if (TempDevicePath != NULL) { | |
| Private->DevicePath = AppendDevicePathNode ( | |
| TempDevicePath, | |
| (EFI_DEVICE_PATH_PROTOCOL *) FlowControl | |
| ); | |
| FreePool (TempDevicePath); | |
| } | |
| } | |
| if (Private->DevicePath == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto Error; | |
| } | |
| // | |
| // Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults. | |
| // | |
| Private->SerialIoMode.ControlMask = SERIAL_CONTROL_MASK; | |
| Private->SerialIoMode.Timeout = SERIAL_TIMEOUT_DEFAULT; | |
| Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate; | |
| Private->SerialIoMode.ReceiveFifoDepth = SERIAL_FIFO_DEFAULT; | |
| Private->SerialIoMode.DataBits = Private->UartDevicePath.DataBits; | |
| Private->SerialIoMode.Parity = Private->UartDevicePath.Parity; | |
| Private->SerialIoMode.StopBits = Private->UartDevicePath.StopBits; | |
| // | |
| // Issue a reset to initialize the COM port | |
| // | |
| Status = Private->SerialIo.Reset (&Private->SerialIo); | |
| if (EFI_ERROR (Status)) { | |
| goto Error; | |
| } | |
| // | |
| // Create new child handle | |
| // | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &Private->Handle, | |
| &gEfiSerialIoProtocolGuid, | |
| &Private->SerialIo, | |
| &gEfiDevicePathProtocolGuid, | |
| Private->DevicePath, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Error; | |
| } | |
| // | |
| // Open For Child Device | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| (VOID **) &WinNtIo, | |
| This->DriverBindingHandle, | |
| Private->Handle, | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Error; | |
| } | |
| return EFI_SUCCESS; | |
| Error: | |
| // | |
| // Use the Stop() function to free all resources allocated in Start() | |
| // | |
| if (Private != NULL) { | |
| if (Private->Handle != NULL) { | |
| This->Stop (This, Handle, 1, &Private->Handle); | |
| } else { | |
| if (NtHandle != INVALID_HANDLE_VALUE) { | |
| Private->WinNtThunk->CloseHandle (NtHandle); | |
| } | |
| if (Private->DevicePath != NULL) { | |
| FreePool (Private->DevicePath); | |
| } | |
| FreeUnicodeStringTable (Private->ControllerNameTable); | |
| FreePool (Private); | |
| } | |
| } | |
| This->Stop (This, Handle, 0, NULL); | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Handle, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| This - TODO: add argument description | |
| Handle - TODO: add argument description | |
| NumberOfChildren - TODO: add argument description | |
| ChildHandleBuffer - TODO: add argument description | |
| Returns: | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_SUCCESS - TODO: Add description for return value | |
| --*/ | |
| { | |
| EFI_STATUS Status; | |
| UINTN Index; | |
| BOOLEAN AllChildrenStopped; | |
| EFI_SERIAL_IO_PROTOCOL *SerialIo; | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| EFI_WIN_NT_IO_PROTOCOL *WinNtIo; | |
| // | |
| // Complete all outstanding transactions to Controller. | |
| // Don't allow any new transaction to Controller to be started. | |
| // | |
| if (NumberOfChildren == 0) { | |
| // | |
| // Close the bus driver | |
| // | |
| Status = gBS->CloseProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Handle | |
| ); | |
| Status = gBS->CloseProtocol ( | |
| Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| Handle | |
| ); | |
| return Status; | |
| } | |
| AllChildrenStopped = TRUE; | |
| for (Index = 0; Index < NumberOfChildren; Index++) { | |
| Status = gBS->OpenProtocol ( | |
| ChildHandleBuffer[Index], | |
| &gEfiSerialIoProtocolGuid, | |
| (VOID **) &SerialIo, | |
| This->DriverBindingHandle, | |
| Handle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (SerialIo); | |
| ASSERT (Private->Handle == ChildHandleBuffer[Index]); | |
| Status = gBS->CloseProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index] | |
| ); | |
| Status = gBS->UninstallMultipleProtocolInterfaces ( | |
| ChildHandleBuffer[Index], | |
| &gEfiSerialIoProtocolGuid, | |
| &Private->SerialIo, | |
| &gEfiDevicePathProtocolGuid, | |
| Private->DevicePath, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gBS->OpenProtocol ( | |
| Handle, | |
| &gEfiWinNtIoProtocolGuid, | |
| (VOID **) &WinNtIo, | |
| This->DriverBindingHandle, | |
| ChildHandleBuffer[Index], | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| } else { | |
| Private->WinNtThunk->CloseHandle (Private->NtHandle); | |
| FreePool (Private->DevicePath); | |
| FreeUnicodeStringTable (Private->ControllerNameTable); | |
| FreePool (Private); | |
| } | |
| } | |
| if (EFI_ERROR (Status)) { | |
| AllChildrenStopped = FALSE; | |
| } | |
| } | |
| if (!AllChildrenStopped) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Serial IO Protocol member functions | |
| // | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoReset ( | |
| IN EFI_SERIAL_IO_PROTOCOL *This | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| This - TODO: add argument description | |
| Returns: | |
| TODO: add return values | |
| --*/ | |
| { | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| EFI_TPL Tpl; | |
| Tpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); | |
| Private->WinNtThunk->PurgeComm ( | |
| Private->NtHandle, | |
| PURGE_TXCLEAR | PURGE_RXCLEAR | |
| ); | |
| gBS->RestoreTPL (Tpl); | |
| return This->SetAttributes ( | |
| This, | |
| This->Mode->BaudRate, | |
| This->Mode->ReceiveFifoDepth, | |
| This->Mode->Timeout, | |
| (EFI_PARITY_TYPE)This->Mode->Parity, | |
| (UINT8) This->Mode->DataBits, | |
| (EFI_STOP_BITS_TYPE)This->Mode->StopBits | |
| ); | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoSetAttributes ( | |
| IN EFI_SERIAL_IO_PROTOCOL *This, | |
| IN UINT64 BaudRate, | |
| IN UINT32 ReceiveFifoDepth, | |
| IN UINT32 Timeout, | |
| IN EFI_PARITY_TYPE Parity, | |
| IN UINT8 DataBits, | |
| IN EFI_STOP_BITS_TYPE StopBits | |
| ) | |
| /*++ | |
| Routine Description: | |
| This function is used to set the attributes. | |
| Arguments: | |
| This - A pointer to the EFI_SERIAL_IO_PROTOCOL structrue. | |
| BaudRate - The Baud rate of the serial device. | |
| ReceiveFifoDepth - The request depth of fifo on receive side. | |
| Timeout - the request timeout for a single charact. | |
| Parity - The type of parity used in serial device. | |
| DataBits - Number of deata bits used in serial device. | |
| StopBits - Number of stop bits used in serial device. | |
| Returns: | |
| Status code | |
| None | |
| --*/ | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_DEVICE_ERROR - add return value to function comment | |
| // TODO: EFI_DEVICE_ERROR - add return value to function comment | |
| // TODO: EFI_DEVICE_ERROR - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_DEVICE_ERROR - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| UINTN Index; | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| COMMTIMEOUTS PortTimeOuts; | |
| DWORD ConvertedTime; | |
| BOOL Result; | |
| UART_DEVICE_PATH *Uart; | |
| EFI_TPL Tpl; | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); | |
| // | |
| // Some of our arguments have defaults if a null value is passed in, and | |
| // we must set the default values if a null argument is passed in. | |
| // | |
| if (BaudRate == 0) { | |
| BaudRate = PcdGet64 (PcdUartDefaultBaudRate); | |
| } | |
| if (ReceiveFifoDepth == 0) { | |
| ReceiveFifoDepth = SERIAL_FIFO_DEFAULT; | |
| } | |
| if (Timeout == 0) { | |
| Timeout = SERIAL_TIMEOUT_DEFAULT; | |
| } | |
| if (Parity == DefaultParity) { | |
| Parity = (EFI_PARITY_TYPE) (PcdGet8 (PcdUartDefaultParity)); | |
| } | |
| if (DataBits == 0) { | |
| DataBits = PcdGet8 (PcdUartDefaultDataBits); | |
| } | |
| if (StopBits == DefaultStopBits) { | |
| StopBits = (EFI_STOP_BITS_TYPE) PcdGet8 (PcdUartDefaultStopBits); | |
| } | |
| // | |
| // Make sure all parameters are valid | |
| // | |
| if ((BaudRate > SERIAL_PORT_MAX_BAUD_RATE) || (BaudRate < SERIAL_PORT_MIN_BAUD_RATE)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| //The lower baud rate supported by the serial device will be selected without exceeding the unsupported BaudRate parameter | |
| // | |
| for (Index = 1; Index < (sizeof (mBaudRateCurrentSupport) / sizeof (mBaudRateCurrentSupport[0])); Index++) { | |
| if (BaudRate < mBaudRateCurrentSupport[Index]) { | |
| BaudRate = mBaudRateCurrentSupport[Index-1]; | |
| break; | |
| } | |
| } | |
| if ((ReceiveFifoDepth < 1) || (ReceiveFifoDepth > SERIAL_PORT_MAX_RECEIVE_FIFO_DEPTH)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Timeout < SERIAL_PORT_MIN_TIMEOUT) || (Timeout > SERIAL_PORT_MAX_TIMEOUT)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Parity < NoParity) || (Parity > SpaceParity)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((StopBits < OneStopBit) || (StopBits > TwoStopBits)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // Now we only support DataBits=7,8. | |
| // | |
| if ((DataBits < 7) || (DataBits > 8)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // Now we only support DataBits=7,8. | |
| // for DataBits = 6,7,8, StopBits can not set OneFiveStopBits. | |
| // | |
| if (StopBits == OneFiveStopBits) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| // | |
| // See if the new attributes already match the current attributes | |
| // | |
| if (Private->UartDevicePath.BaudRate == BaudRate && | |
| Private->UartDevicePath.DataBits == DataBits && | |
| Private->UartDevicePath.Parity == Parity && | |
| Private->UartDevicePath.StopBits == StopBits && | |
| Private->SerialIoMode.ReceiveFifoDepth == ReceiveFifoDepth && | |
| Private->SerialIoMode.Timeout == Timeout ) { | |
| return EFI_SUCCESS; | |
| } | |
| Tpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| // | |
| // Get current values from NT | |
| // | |
| ZeroMem (&Private->NtDCB, sizeof (DCB)); | |
| Private->NtDCB.DCBlength = sizeof (DCB); | |
| if (!Private->WinNtThunk->GetCommState (Private->NtHandle, &Private->NtDCB)) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialSetAttributes: GetCommState %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| // | |
| // Map EFI com setting to NT | |
| // | |
| Private->NtDCB.BaudRate = ConvertBaud2Nt (BaudRate); | |
| Private->NtDCB.ByteSize = ConvertData2Nt (DataBits); | |
| Private->NtDCB.Parity = ConvertParity2Nt (Parity); | |
| Private->NtDCB.StopBits = ConvertStop2Nt (StopBits); | |
| Private->NtDCB.fBinary = TRUE; | |
| Private->NtDCB.fParity = Private->NtDCB.Parity == NOPARITY ? FALSE : TRUE; | |
| Private->NtDCB.fOutxCtsFlow = FALSE; | |
| Private->NtDCB.fOutxDsrFlow = FALSE; | |
| Private->NtDCB.fDtrControl = DTR_CONTROL_ENABLE; | |
| Private->NtDCB.fDsrSensitivity = FALSE; | |
| Private->NtDCB.fOutX = FALSE; | |
| Private->NtDCB.fInX = FALSE; | |
| Private->NtDCB.fRtsControl = RTS_CONTROL_ENABLE; | |
| Private->NtDCB.fNull = FALSE; | |
| // | |
| // Set new values | |
| // | |
| Result = Private->WinNtThunk->SetCommState (Private->NtHandle, &Private->NtDCB); | |
| if (!Result) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialSetAttributes: SetCommState %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| // | |
| // Set com port read/write timeout values | |
| // | |
| ConvertedTime = ConvertTime2Nt (Timeout); | |
| PortTimeOuts.ReadIntervalTimeout = MAXDWORD; | |
| PortTimeOuts.ReadTotalTimeoutMultiplier = 0; | |
| PortTimeOuts.ReadTotalTimeoutConstant = ConvertedTime; | |
| PortTimeOuts.WriteTotalTimeoutMultiplier = ConvertedTime == 0 ? 1 : ConvertedTime; | |
| PortTimeOuts.WriteTotalTimeoutConstant = 0; | |
| if (!Private->WinNtThunk->SetCommTimeouts (Private->NtHandle, &PortTimeOuts)) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialSetAttributes: SetCommTimeouts %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| // | |
| // Update mode | |
| // | |
| Private->SerialIoMode.BaudRate = BaudRate; | |
| Private->SerialIoMode.ReceiveFifoDepth = ReceiveFifoDepth; | |
| Private->SerialIoMode.Timeout = Timeout; | |
| Private->SerialIoMode.Parity = Parity; | |
| Private->SerialIoMode.DataBits = DataBits; | |
| Private->SerialIoMode.StopBits = StopBits; | |
| // | |
| // See if Device Path Node has actually changed | |
| // | |
| if (Private->UartDevicePath.BaudRate == BaudRate && | |
| Private->UartDevicePath.DataBits == DataBits && | |
| Private->UartDevicePath.Parity == Parity && | |
| Private->UartDevicePath.StopBits == StopBits ) { | |
| gBS->RestoreTPL(Tpl); | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Update the device path | |
| // | |
| Private->UartDevicePath.BaudRate = BaudRate; | |
| Private->UartDevicePath.DataBits = DataBits; | |
| Private->UartDevicePath.Parity = (UINT8) Parity; | |
| Private->UartDevicePath.StopBits = (UINT8) StopBits; | |
| Status = EFI_SUCCESS; | |
| if (Private->Handle != NULL) { | |
| Uart = (UART_DEVICE_PATH *) ( | |
| (UINTN) Private->DevicePath | |
| + GetDevicePathSize (Private->ParentDevicePath) | |
| - END_DEVICE_PATH_LENGTH | |
| ); | |
| CopyMem (Uart, &Private->UartDevicePath, sizeof (UART_DEVICE_PATH)); | |
| Status = gBS->ReinstallProtocolInterface ( | |
| Private->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| Private->DevicePath, | |
| Private->DevicePath | |
| ); | |
| } | |
| gBS->RestoreTPL (Tpl); | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoSetControl ( | |
| IN EFI_SERIAL_IO_PROTOCOL *This, | |
| IN UINT32 Control | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| This - TODO: add argument description | |
| Control - TODO: add argument description | |
| Returns: | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_SUCCESS - TODO: Add description for return value | |
| --*/ | |
| { | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| BOOL Result; | |
| DCB Dcb; | |
| EFI_TPL Tpl; | |
| UART_FLOW_CONTROL_DEVICE_PATH *FlowControl; | |
| EFI_STATUS Status; | |
| // | |
| // first determine the parameter is invalid | |
| // | |
| if (Control & (~(EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY | | |
| EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | | |
| EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE))) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Tpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); | |
| Result = Private->WinNtThunk->GetCommState (Private->NtHandle, &Dcb); | |
| if (!Result) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialSetControl: GetCommState %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| Dcb.fRtsControl = RTS_CONTROL_DISABLE; | |
| Dcb.fDtrControl = DTR_CONTROL_DISABLE; | |
| Private->HardwareFlowControl = FALSE; | |
| Private->SoftwareLoopbackEnable = FALSE; | |
| Private->HardwareLoopbackEnable = FALSE; | |
| if (Control & EFI_SERIAL_REQUEST_TO_SEND) { | |
| Dcb.fRtsControl = RTS_CONTROL_ENABLE; | |
| } | |
| if (Control & EFI_SERIAL_DATA_TERMINAL_READY) { | |
| Dcb.fDtrControl = DTR_CONTROL_ENABLE; | |
| } | |
| if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) { | |
| Private->HardwareFlowControl = TRUE; | |
| } | |
| if (Control & EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) { | |
| Private->SoftwareLoopbackEnable = TRUE; | |
| } | |
| if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) { | |
| Private->HardwareLoopbackEnable = TRUE; | |
| } | |
| Result = Private->WinNtThunk->SetCommState ( | |
| Private->NtHandle, | |
| &Dcb | |
| ); | |
| if (!Result) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialSetControl: SetCommState %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| Status = EFI_SUCCESS; | |
| if (Private->Handle != NULL) { | |
| FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) ( | |
| (UINTN) Private->DevicePath | |
| + GetDevicePathSize (Private->ParentDevicePath) | |
| - END_DEVICE_PATH_LENGTH | |
| + sizeof (UART_DEVICE_PATH) | |
| ); | |
| if (IsUartFlowControlNode (FlowControl) && | |
| ((FlowControl->FlowControlMap == UART_FLOW_CONTROL_HARDWARE) ^ Private->HardwareFlowControl)) { | |
| // | |
| // Flow Control setting is changed, need to reinstall device path protocol | |
| // | |
| FlowControl->FlowControlMap = Private->HardwareFlowControl ? UART_FLOW_CONTROL_HARDWARE : 0; | |
| Status = gBS->ReinstallProtocolInterface ( | |
| Private->Handle, | |
| &gEfiDevicePathProtocolGuid, | |
| Private->DevicePath, | |
| Private->DevicePath | |
| ); | |
| } | |
| } | |
| gBS->RestoreTPL (Tpl); | |
| return Status; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoGetControl ( | |
| IN EFI_SERIAL_IO_PROTOCOL *This, | |
| OUT UINT32 *Control | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| This - TODO: add argument description | |
| Control - TODO: add argument description | |
| Returns: | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_SUCCESS - TODO: Add description for return value | |
| --*/ | |
| { | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| DWORD ModemStatus; | |
| DWORD Errors; | |
| UINT32 Bits; | |
| DCB Dcb; | |
| EFI_TPL Tpl; | |
| Tpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); | |
| // | |
| // Get modem status | |
| // | |
| if (!Private->WinNtThunk->GetCommModemStatus (Private->NtHandle, &ModemStatus)) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| Bits = 0; | |
| if (ModemStatus & MS_CTS_ON) { | |
| Bits |= EFI_SERIAL_CLEAR_TO_SEND; | |
| } | |
| if (ModemStatus & MS_DSR_ON) { | |
| Bits |= EFI_SERIAL_DATA_SET_READY; | |
| } | |
| if (ModemStatus & MS_RING_ON) { | |
| Bits |= EFI_SERIAL_RING_INDICATE; | |
| } | |
| if (ModemStatus & MS_RLSD_ON) { | |
| Bits |= EFI_SERIAL_CARRIER_DETECT; | |
| } | |
| // | |
| // Get ctrl status | |
| // | |
| if (!Private->WinNtThunk->GetCommState (Private->NtHandle, &Dcb)) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialGetControl: GetCommState %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| if (Dcb.fDtrControl == DTR_CONTROL_ENABLE) { | |
| Bits |= EFI_SERIAL_DATA_TERMINAL_READY; | |
| } | |
| if (Dcb.fRtsControl == RTS_CONTROL_ENABLE) { | |
| Bits |= EFI_SERIAL_REQUEST_TO_SEND; | |
| } | |
| if (Private->HardwareFlowControl) { | |
| Bits |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; | |
| } | |
| if (Private->SoftwareLoopbackEnable) { | |
| Bits |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE; | |
| } | |
| if (Private->HardwareLoopbackEnable) { | |
| Bits |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE; | |
| } | |
| // | |
| // Get input buffer status | |
| // | |
| if (!Private->WinNtThunk->ClearCommError (Private->NtHandle, &Errors, &Private->NtComStatus)) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialGetControl: ClearCommError %d\n", Private->NtError)); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| if (Private->NtComStatus.cbInQue == 0) { | |
| Bits |= EFI_SERIAL_INPUT_BUFFER_EMPTY; | |
| } | |
| *Control = Bits; | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoWrite ( | |
| IN EFI_SERIAL_IO_PROTOCOL *This, | |
| IN OUT UINTN *BufferSize, | |
| IN VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| This - TODO: add argument description | |
| BufferSize - TODO: add argument description | |
| Buffer - TODO: add argument description | |
| Returns: | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| EFI_SUCCESS - TODO: Add description for return value | |
| --*/ | |
| { | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| UINT8 *ByteBuffer; | |
| UINTN TotalBytesWritten; | |
| DWORD BytesToGo; | |
| DWORD BytesWritten; | |
| BOOL Result; | |
| UINT32 Index; | |
| UINT32 Control; | |
| EFI_TPL Tpl; | |
| Tpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); | |
| ByteBuffer = (UINT8 *) Buffer; | |
| TotalBytesWritten = 0; | |
| if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) { | |
| for (Index = 0; Index < *BufferSize; Index++) { | |
| if (IsaSerialFifoAdd (&Private->Fifo, ByteBuffer[Index]) == EFI_SUCCESS) { | |
| TotalBytesWritten++; | |
| } else { | |
| break; | |
| } | |
| } | |
| } else { | |
| BytesToGo = (DWORD) (*BufferSize); | |
| do { | |
| if (Private->HardwareFlowControl) { | |
| // | |
| // Send RTS | |
| // | |
| WinNtSerialIoGetControl (&Private->SerialIo, &Control); | |
| Control |= EFI_SERIAL_REQUEST_TO_SEND; | |
| WinNtSerialIoSetControl (&Private->SerialIo, Control); | |
| } | |
| // | |
| // Do the write | |
| // | |
| Result = Private->WinNtThunk->WriteFile ( | |
| Private->NtHandle, | |
| &ByteBuffer[TotalBytesWritten], | |
| BytesToGo, | |
| &BytesWritten, | |
| NULL | |
| ); | |
| if (Private->HardwareFlowControl) { | |
| // | |
| // Assert RTS | |
| // | |
| WinNtSerialIoGetControl (&Private->SerialIo, &Control); | |
| Control &= ~ (UINT32) EFI_SERIAL_REQUEST_TO_SEND; | |
| WinNtSerialIoSetControl (&Private->SerialIo, Control); | |
| } | |
| TotalBytesWritten += BytesWritten; | |
| BytesToGo -= BytesWritten; | |
| if (!Result) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| DEBUG ((EFI_D_ERROR, "SerialWrite: FileWrite %d\n", Private->NtError)); | |
| *BufferSize = TotalBytesWritten; | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| } while (BytesToGo > 0); | |
| } | |
| *BufferSize = TotalBytesWritten; | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| EFIAPI | |
| WinNtSerialIoRead ( | |
| IN EFI_SERIAL_IO_PROTOCOL *This, | |
| IN OUT UINTN *BufferSize, | |
| OUT VOID *Buffer | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| This - TODO: add argument description | |
| BufferSize - TODO: add argument description | |
| Buffer - TODO: add argument description | |
| Returns: | |
| EFI_DEVICE_ERROR - TODO: Add description for return value | |
| --*/ | |
| { | |
| WIN_NT_SERIAL_IO_PRIVATE_DATA *Private; | |
| BOOL Result; | |
| DWORD BytesRead; | |
| EFI_STATUS Status; | |
| UINT32 Index; | |
| UINT8 Data; | |
| UINT32 Control; | |
| EFI_TPL Tpl; | |
| Tpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| Private = WIN_NT_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); | |
| // | |
| // Do the read | |
| // | |
| if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) { | |
| for (Index = 0, BytesRead = 0; Index < *BufferSize; Index++) { | |
| if (IsaSerialFifoRemove (&Private->Fifo, &Data) == EFI_SUCCESS) { | |
| ((UINT8 *) Buffer)[Index] = Data; | |
| BytesRead++; | |
| } else { | |
| break; | |
| } | |
| } | |
| } else { | |
| if (Private->HardwareFlowControl) { | |
| WinNtSerialIoGetControl (&Private->SerialIo, &Control); | |
| Control |= EFI_SERIAL_DATA_TERMINAL_READY; | |
| WinNtSerialIoSetControl (&Private->SerialIo, Control); | |
| } | |
| Result = Private->WinNtThunk->ReadFile ( | |
| Private->NtHandle, | |
| Buffer, | |
| (DWORD) *BufferSize, | |
| &BytesRead, | |
| NULL | |
| ); | |
| if (Private->HardwareFlowControl) { | |
| WinNtSerialIoGetControl (&Private->SerialIo, &Control); | |
| Control &= ~ (UINT32) EFI_SERIAL_DATA_TERMINAL_READY; | |
| WinNtSerialIoSetControl (&Private->SerialIo, Control); | |
| } | |
| if (!Result) { | |
| Private->NtError = Private->WinNtThunk->GetLastError (); | |
| gBS->RestoreTPL (Tpl); | |
| return EFI_DEVICE_ERROR; | |
| } | |
| } | |
| if (BytesRead != *BufferSize) { | |
| Status = EFI_TIMEOUT; | |
| } else { | |
| Status = EFI_SUCCESS; | |
| } | |
| *BufferSize = (UINTN) BytesRead; | |
| gBS->RestoreTPL (Tpl); | |
| return Status; | |
| } | |
| BOOLEAN | |
| IsaSerialFifoFull ( | |
| IN SERIAL_DEV_FIFO *Fifo | |
| ) | |
| /*++ | |
| Routine Description: | |
| Detect whether specific FIFO is full or not | |
| Arguments: | |
| Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO | |
| Returns: | |
| TRUE: the FIFO is full | |
| FALSE: the FIFO is not full | |
| --*/ | |
| { | |
| if (Fifo->Surplus == 0) { | |
| return TRUE; | |
| } | |
| return FALSE; | |
| } | |
| BOOLEAN | |
| IsaSerialFifoEmpty ( | |
| IN SERIAL_DEV_FIFO *Fifo | |
| ) | |
| /*++ | |
| Routine Description: | |
| Detect whether specific FIFO is empty or not | |
| Arguments: | |
| Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO | |
| Returns: | |
| TRUE: the FIFO is empty | |
| FALSE: the FIFO is not empty | |
| --*/ | |
| { | |
| if (Fifo->Surplus == SERIAL_MAX_BUFFER_SIZE) { | |
| return TRUE; | |
| } | |
| return FALSE; | |
| } | |
| EFI_STATUS | |
| IsaSerialFifoAdd ( | |
| IN SERIAL_DEV_FIFO *Fifo, | |
| IN UINT8 Data | |
| ) | |
| /*++ | |
| Routine Description: | |
| Add data to specific FIFO | |
| Arguments: | |
| Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO | |
| Data UINT8: the data added to FIFO | |
| Returns: | |
| EFI_SUCCESS: Add data to specific FIFO successfully | |
| EFI_OUT_RESOURCE: Failed to add data because FIFO is already full | |
| --*/ | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| { | |
| // | |
| // if FIFO full can not add data | |
| // | |
| if (IsaSerialFifoFull (Fifo)) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| // | |
| // FIFO is not full can add data | |
| // | |
| Fifo->Data[Fifo->Last] = Data; | |
| Fifo->Surplus--; | |
| Fifo->Last++; | |
| if (Fifo->Last >= SERIAL_MAX_BUFFER_SIZE) { | |
| Fifo->Last = 0; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| IsaSerialFifoRemove ( | |
| IN SERIAL_DEV_FIFO *Fifo, | |
| OUT UINT8 *Data | |
| ) | |
| /*++ | |
| Routine Description: | |
| Remove data from specific FIFO | |
| Arguments: | |
| Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO | |
| Data UINT8*: the data removed from FIFO | |
| Returns: | |
| EFI_SUCCESS: Remove data from specific FIFO successfully | |
| EFI_OUT_RESOURCE: Failed to remove data because FIFO is empty | |
| --*/ | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| { | |
| // | |
| // if FIFO is empty, no data can remove | |
| // | |
| if (IsaSerialFifoEmpty (Fifo)) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| // | |
| // FIFO is not empty, can remove data | |
| // | |
| *Data = Fifo->Data[Fifo->First]; | |
| Fifo->Surplus++; | |
| Fifo->First++; | |
| if (Fifo->First >= SERIAL_MAX_BUFFER_SIZE) { | |
| Fifo->First = 0; | |
| } | |
| return EFI_SUCCESS; | |
| } |