| /** @file | |
| Scan the entire PCI bus for root bridges to support OVMF above Xen. | |
| Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials are licensed and made available | |
| under the terms and conditions of the BSD License which accompanies this | |
| distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php. | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT | |
| WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include <PiDxe.h> | |
| #include <IndustryStandard/Pci.h> | |
| #include <IndustryStandard/Q35MchIch9.h> | |
| #include <Protocol/PciHostBridgeResourceAllocation.h> | |
| #include <Protocol/PciRootBridgeIo.h> | |
| #include <Library/BaseMemoryLib.h> | |
| #include <Library/DebugLib.h> | |
| #include <Library/MemoryAllocationLib.h> | |
| #include <Library/PciHostBridgeLib.h> | |
| #include <Library/PciLib.h> | |
| #include "PciHostBridge.h" | |
| STATIC | |
| VOID | |
| PcatPciRootBridgeBarExisted ( | |
| IN UINTN Address, | |
| OUT UINT32 *OriginalValue, | |
| OUT UINT32 *Value | |
| ) | |
| { | |
| // | |
| // Preserve the original value | |
| // | |
| *OriginalValue = PciRead32 (Address); | |
| // | |
| // Disable timer interrupt while the BAR is probed | |
| // | |
| DisableInterrupts (); | |
| PciWrite32 (Address, 0xFFFFFFFF); | |
| *Value = PciRead32 (Address); | |
| PciWrite32 (Address, *OriginalValue); | |
| // | |
| // Enable interrupt | |
| // | |
| EnableInterrupts (); | |
| } | |
| STATIC | |
| VOID | |
| PcatPciRootBridgeParseBars ( | |
| IN UINT16 Command, | |
| IN UINTN Bus, | |
| IN UINTN Device, | |
| IN UINTN Function, | |
| IN UINTN BarOffsetBase, | |
| IN UINTN BarOffsetEnd, | |
| IN PCI_ROOT_BRIDGE_APERTURE *Io, | |
| IN PCI_ROOT_BRIDGE_APERTURE *Mem, | |
| IN PCI_ROOT_BRIDGE_APERTURE *MemAbove4G, | |
| IN PCI_ROOT_BRIDGE_APERTURE *PMem, | |
| IN PCI_ROOT_BRIDGE_APERTURE *PMemAbove4G | |
| ) | |
| { | |
| UINT32 OriginalValue; | |
| UINT32 Value; | |
| UINT32 OriginalUpperValue; | |
| UINT32 UpperValue; | |
| UINT64 Mask; | |
| UINTN Offset; | |
| UINT64 Base; | |
| UINT64 Length; | |
| UINT64 Limit; | |
| PCI_ROOT_BRIDGE_APERTURE *MemAperture; | |
| for (Offset = BarOffsetBase; Offset < BarOffsetEnd; Offset += sizeof (UINT32)) { | |
| PcatPciRootBridgeBarExisted ( | |
| PCI_LIB_ADDRESS (Bus, Device, Function, Offset), | |
| &OriginalValue, &Value | |
| ); | |
| if (Value == 0) { | |
| continue; | |
| } | |
| if ((Value & BIT0) == BIT0) { | |
| // | |
| // IO Bar | |
| // | |
| if (Command & EFI_PCI_COMMAND_IO_SPACE) { | |
| Mask = 0xfffffffc; | |
| Base = OriginalValue & Mask; | |
| Length = ((~(Value & Mask)) & Mask) + 0x04; | |
| if (!(Value & 0xFFFF0000)) { | |
| Length &= 0x0000FFFF; | |
| } | |
| Limit = Base + Length - 1; | |
| if (Base < Limit) { | |
| if (Io->Base > Base) { | |
| Io->Base = Base; | |
| } | |
| if (Io->Limit < Limit) { | |
| Io->Limit = Limit; | |
| } | |
| } | |
| } | |
| } else { | |
| // | |
| // Mem Bar | |
| // | |
| if (Command & EFI_PCI_COMMAND_MEMORY_SPACE) { | |
| Mask = 0xfffffff0; | |
| Base = OriginalValue & Mask; | |
| Length = Value & Mask; | |
| if ((Value & (BIT1 | BIT2)) == 0) { | |
| // | |
| // 32bit | |
| // | |
| Length = ((~Length) + 1) & 0xffffffff; | |
| if ((Value & BIT3) == BIT3) { | |
| MemAperture = PMem; | |
| } else { | |
| MemAperture = Mem; | |
| } | |
| } else { | |
| // | |
| // 64bit | |
| // | |
| Offset += 4; | |
| PcatPciRootBridgeBarExisted ( | |
| PCI_LIB_ADDRESS (Bus, Device, Function, Offset), | |
| &OriginalUpperValue, | |
| &UpperValue | |
| ); | |
| Base = Base | LShiftU64 ((UINT64) OriginalUpperValue, 32); | |
| Length = Length | LShiftU64 ((UINT64) UpperValue, 32); | |
| Length = (~Length) + 1; | |
| if ((Value & BIT3) == BIT3) { | |
| MemAperture = PMemAbove4G; | |
| } else { | |
| MemAperture = MemAbove4G; | |
| } | |
| } | |
| Limit = Base + Length - 1; | |
| if (Base < Limit) { | |
| if (MemAperture->Base > Base) { | |
| MemAperture->Base = Base; | |
| } | |
| if (MemAperture->Limit < Limit) { | |
| MemAperture->Limit = Limit; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| } | |
| PCI_ROOT_BRIDGE * | |
| ScanForRootBridges ( | |
| UINTN *NumberOfRootBridges | |
| ) | |
| { | |
| UINTN PrimaryBus; | |
| UINTN SubBus; | |
| UINT8 Device; | |
| UINT8 Function; | |
| UINTN NumberOfDevices; | |
| UINTN Address; | |
| PCI_TYPE01 Pci; | |
| UINT64 Attributes; | |
| UINT64 Base; | |
| UINT64 Limit; | |
| UINT64 Value; | |
| PCI_ROOT_BRIDGE_APERTURE Io, Mem, MemAbove4G, PMem, PMemAbove4G, *MemAperture; | |
| PCI_ROOT_BRIDGE *RootBridges; | |
| UINTN BarOffsetEnd; | |
| *NumberOfRootBridges = 0; | |
| RootBridges = NULL; | |
| // | |
| // After scanning all the PCI devices on the PCI root bridge's primary bus, | |
| // update the Primary Bus Number for the next PCI root bridge to be this PCI | |
| // root bridge's subordinate bus number + 1. | |
| // | |
| for (PrimaryBus = 0; PrimaryBus <= PCI_MAX_BUS; PrimaryBus = SubBus + 1) { | |
| SubBus = PrimaryBus; | |
| Attributes = 0; | |
| ZeroMem (&Io, sizeof (Io)); | |
| ZeroMem (&Mem, sizeof (Mem)); | |
| ZeroMem (&MemAbove4G, sizeof (MemAbove4G)); | |
| ZeroMem (&PMem, sizeof (PMem)); | |
| ZeroMem (&PMemAbove4G, sizeof (PMemAbove4G)); | |
| Io.Base = Mem.Base = MemAbove4G.Base = PMem.Base = PMemAbove4G.Base = MAX_UINT64; | |
| // | |
| // Scan all the PCI devices on the primary bus of the PCI root bridge | |
| // | |
| for (Device = 0, NumberOfDevices = 0; Device <= PCI_MAX_DEVICE; Device++) { | |
| for (Function = 0; Function <= PCI_MAX_FUNC; Function++) { | |
| // | |
| // Compute the PCI configuration address of the PCI device to probe | |
| // | |
| Address = PCI_LIB_ADDRESS (PrimaryBus, Device, Function, 0); | |
| // | |
| // Read the Vendor ID from the PCI Configuration Header | |
| // | |
| if (PciRead16 (Address) == MAX_UINT16) { | |
| if (Function == 0) { | |
| // | |
| // If the PCI Configuration Read fails, or a PCI device does not | |
| // exist, then skip this entire PCI device | |
| // | |
| break; | |
| } else { | |
| // | |
| // If PCI function != 0, VendorId == 0xFFFF, we continue to search | |
| // PCI function. | |
| // | |
| continue; | |
| } | |
| } | |
| // | |
| // Read the entire PCI Configuration Header | |
| // | |
| PciReadBuffer (Address, sizeof (Pci), &Pci); | |
| // | |
| // Increment the number of PCI device found on the primary bus of the | |
| // PCI root bridge | |
| // | |
| NumberOfDevices++; | |
| // | |
| // Look for devices with the VGA Palette Snoop enabled in the COMMAND | |
| // register of the PCI Config Header | |
| // | |
| if ((Pci.Hdr.Command & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) != 0) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16; | |
| } | |
| BarOffsetEnd = 0; | |
| // | |
| // PCI-PCI Bridge | |
| // | |
| if (IS_PCI_BRIDGE (&Pci)) { | |
| // | |
| // Get the Bus range that the PPB is decoding | |
| // | |
| if (Pci.Bridge.SubordinateBus > SubBus) { | |
| // | |
| // If the suborinate bus number of the PCI-PCI bridge is greater | |
| // than the PCI root bridge's current subordinate bus number, | |
| // then update the PCI root bridge's subordinate bus number | |
| // | |
| SubBus = Pci.Bridge.SubordinateBus; | |
| } | |
| // | |
| // Get the I/O range that the PPB is decoding | |
| // | |
| Value = Pci.Bridge.IoBase & 0x0f; | |
| Base = ((UINT32) Pci.Bridge.IoBase & 0xf0) << 8; | |
| Limit = (((UINT32) Pci.Bridge.IoLimit & 0xf0) << 8) | 0x0fff; | |
| if (Value == BIT0) { | |
| Base |= ((UINT32) Pci.Bridge.IoBaseUpper16 << 16); | |
| Limit |= ((UINT32) Pci.Bridge.IoLimitUpper16 << 16); | |
| } | |
| if (Base < Limit) { | |
| if (Io.Base > Base) { | |
| Io.Base = Base; | |
| } | |
| if (Io.Limit < Limit) { | |
| Io.Limit = Limit; | |
| } | |
| } | |
| // | |
| // Get the Memory range that the PPB is decoding | |
| // | |
| Base = ((UINT32) Pci.Bridge.MemoryBase & 0xfff0) << 16; | |
| Limit = (((UINT32) Pci.Bridge.MemoryLimit & 0xfff0) << 16) | 0xfffff; | |
| if (Base < Limit) { | |
| if (Mem.Base > Base) { | |
| Mem.Base = Base; | |
| } | |
| if (Mem.Limit < Limit) { | |
| Mem.Limit = Limit; | |
| } | |
| } | |
| // | |
| // Get the Prefetchable Memory range that the PPB is decoding | |
| // | |
| Value = Pci.Bridge.PrefetchableMemoryBase & 0x0f; | |
| Base = ((UINT32) Pci.Bridge.PrefetchableMemoryBase & 0xfff0) << 16; | |
| Limit = (((UINT32) Pci.Bridge.PrefetchableMemoryLimit & 0xfff0) | |
| << 16) | 0xfffff; | |
| MemAperture = &PMem; | |
| if (Value == BIT0) { | |
| Base |= LShiftU64 (Pci.Bridge.PrefetchableBaseUpper32, 32); | |
| Limit |= LShiftU64 (Pci.Bridge.PrefetchableLimitUpper32, 32); | |
| MemAperture = &PMemAbove4G; | |
| } | |
| if (Base < Limit) { | |
| if (MemAperture->Base > Base) { | |
| MemAperture->Base = Base; | |
| } | |
| if (MemAperture->Limit < Limit) { | |
| MemAperture->Limit = Limit; | |
| } | |
| } | |
| // | |
| // Look at the PPB Configuration for legacy decoding attributes | |
| // | |
| if ((Pci.Bridge.BridgeControl & EFI_PCI_BRIDGE_CONTROL_ISA) | |
| == EFI_PCI_BRIDGE_CONTROL_ISA) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO_16; | |
| Attributes |= EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO; | |
| } | |
| if ((Pci.Bridge.BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA) | |
| == EFI_PCI_BRIDGE_CONTROL_VGA) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_MEMORY; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO; | |
| if ((Pci.Bridge.BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA_16) | |
| != 0) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO_16; | |
| } | |
| } | |
| BarOffsetEnd = OFFSET_OF (PCI_TYPE01, Bridge.Bar[2]); | |
| } else { | |
| // | |
| // Parse the BARs of the PCI device to get what I/O Ranges, Memory | |
| // Ranges, and Prefetchable Memory Ranges the device is decoding | |
| // | |
| if ((Pci.Hdr.HeaderType & HEADER_LAYOUT_CODE) == HEADER_TYPE_DEVICE) { | |
| BarOffsetEnd = OFFSET_OF (PCI_TYPE00, Device.Bar[6]); | |
| } | |
| } | |
| PcatPciRootBridgeParseBars ( | |
| Pci.Hdr.Command, | |
| PrimaryBus, | |
| Device, | |
| Function, | |
| OFFSET_OF (PCI_TYPE00, Device.Bar), | |
| BarOffsetEnd, | |
| &Io, | |
| &Mem, &MemAbove4G, | |
| &PMem, &PMemAbove4G | |
| ); | |
| // | |
| // See if the PCI device is an IDE controller | |
| // | |
| if (IS_CLASS2 (&Pci, PCI_CLASS_MASS_STORAGE, | |
| PCI_CLASS_MASS_STORAGE_IDE)) { | |
| if (Pci.Hdr.ClassCode[0] & 0x80) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO; | |
| } | |
| if (Pci.Hdr.ClassCode[0] & 0x01) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO; | |
| } | |
| if (Pci.Hdr.ClassCode[0] & 0x04) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO; | |
| } | |
| } | |
| // | |
| // See if the PCI device is a legacy VGA controller or | |
| // a standard VGA controller | |
| // | |
| if (IS_CLASS2 (&Pci, PCI_CLASS_OLD, PCI_CLASS_OLD_VGA) || | |
| IS_CLASS2 (&Pci, PCI_CLASS_DISPLAY, PCI_CLASS_DISPLAY_VGA) | |
| ) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_MEMORY; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO_16; | |
| } | |
| // | |
| // See if the PCI Device is a PCI - ISA or PCI - EISA | |
| // or ISA_POSITIVIE_DECODE Bridge device | |
| // | |
| if (Pci.Hdr.ClassCode[2] == PCI_CLASS_BRIDGE) { | |
| if (Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA || | |
| Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_EISA || | |
| Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA_PDECODE) { | |
| Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO; | |
| Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO_16; | |
| Attributes |= EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO; | |
| } | |
| } | |
| // | |
| // If this device is not a multi function device, then skip the rest | |
| // of this PCI device | |
| // | |
| if (Function == 0 && !IS_PCI_MULTI_FUNC (&Pci)) { | |
| break; | |
| } | |
| } | |
| } | |
| // | |
| // If at least one PCI device was found on the primary bus of this PCI | |
| // root bridge, then the PCI root bridge exists. | |
| // | |
| if (NumberOfDevices > 0) { | |
| RootBridges = ReallocatePool ( | |
| (*NumberOfRootBridges) * sizeof (PCI_ROOT_BRIDGE), | |
| (*NumberOfRootBridges + 1) * sizeof (PCI_ROOT_BRIDGE), | |
| RootBridges | |
| ); | |
| ASSERT (RootBridges != NULL); | |
| InitRootBridge ( | |
| Attributes, Attributes, 0, | |
| (UINT8) PrimaryBus, (UINT8) SubBus, | |
| &Io, &Mem, &MemAbove4G, &PMem, &PMemAbove4G, | |
| &RootBridges[*NumberOfRootBridges] | |
| ); | |
| RootBridges[*NumberOfRootBridges].ResourceAssigned = TRUE; | |
| // | |
| // Increment the index for the next PCI Root Bridge | |
| // | |
| (*NumberOfRootBridges)++; | |
| } | |
| } | |
| return RootBridges; | |
| } |