NetworkPkg/IScsiDxe/IScsiMisc.h - third_party/edk2 - Git at Google

 /** @file
   Miscellaneous definitions for iSCSI driver.

 Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
 SPDX-License-Identifier: BSD-2-Clause-Patent

 **/

 #ifndef _ISCSI_MISC_H_
 #define _ISCSI_MISC_H_

 typedef struct _ISCSI_DRIVER_DATA ISCSI_DRIVER_DATA;

 ///
 /// IPv4 Device Path Node Length
 ///
 #define IP4_NODE_LEN_NEW_VERSIONS    27

 ///
 /// IPv6 Device Path Node Length
 ///
 #define IP6_NODE_LEN_OLD_VERSIONS    43
 #define IP6_NODE_LEN_NEW_VERSIONS    60

 ///
 /// The ignored field StaticIpAddress's offset in old IPv6 Device Path
 ///
 #define IP6_OLD_IPADDRESS_OFFSET      42


 #pragma pack(1)
 typedef struct _ISCSI_SESSION_CONFIG_NVDATA {
   UINT16            TargetPort;
   UINT8             Enabled;
   UINT8             IpMode;

   EFI_IP_ADDRESS    LocalIp;
   EFI_IPv4_ADDRESS  SubnetMask;
   EFI_IP_ADDRESS    Gateway;

   BOOLEAN           InitiatorInfoFromDhcp;
   BOOLEAN           TargetInfoFromDhcp;

   CHAR8             TargetName[ISCSI_NAME_MAX_SIZE];
   EFI_IP_ADDRESS    TargetIp;
   UINT8             PrefixLength;
   UINT8             BootLun[8];

   UINT16            ConnectTimeout; ///< timeout value in milliseconds.
   UINT8             ConnectRetryCount;
   UINT8             IsId[6];

   BOOLEAN           RedirectFlag;
   UINT16            OriginalTargetPort;     // The port of proxy/virtual target.
   EFI_IP_ADDRESS    OriginalTargetIp;       // The address of proxy/virtual target.

   BOOLEAN           DnsMode;  // Flag indicate whether the Target address is expressed as URL format.
   CHAR8             TargetUrl[ISCSI_TARGET_URI_MAX_SIZE];

 } ISCSI_SESSION_CONFIG_NVDATA;
 #pragma pack()

 /**
   Calculate the prefix length of the IPv4 subnet mask.

   @param[in]  SubnetMask The IPv4 subnet mask.

   @return The prefix length of the subnet mask.
   @retval 0 Other errors as indicated.

 **/
 UINT8
 IScsiGetSubnetMaskPrefixLength (
   IN EFI_IPv4_ADDRESS  *SubnetMask
   );

 /**
   Convert the hexadecimal encoded LUN string into the 64-bit LUN.

   @param[in]   Str             The hexadecimal encoded LUN string.
   @param[out]  Lun             Storage to return the 64-bit LUN.

   @retval EFI_SUCCESS           The 64-bit LUN is stored in Lun.
   @retval EFI_INVALID_PARAMETER The string is malformatted.

 **/
 EFI_STATUS
 IScsiAsciiStrToLun (
   IN  CHAR8  *Str,
   OUT UINT8  *Lun
   );

 /**
   Convert the 64-bit LUN into the hexadecimal encoded LUN string.

   @param[in]   Lun    The 64-bit LUN.
   @param[out]  String The storage to return the hexadecimal encoded LUN string.

 **/
 VOID
 IScsiLunToUnicodeStr (
   IN UINT8    *Lun,
   OUT CHAR16  *String
   );

 /**
   Convert the mac address into a hexadecimal encoded "-" separated string.

   @param[in]  Mac     The mac address.
   @param[in]  Len     Length in bytes of the mac address.
   @param[in]  VlanId  VLAN ID of the network device.
   @param[out] Str     The storage to return the mac string.

 **/
 VOID
 IScsiMacAddrToStr (
   IN  EFI_MAC_ADDRESS  *Mac,
   IN  UINT32           Len,
   IN  UINT16           VlanId,
   OUT CHAR16           *Str
   );

 /**
   Convert the formatted IP address into the binary IP address.

   @param[in]   Str               The UNICODE string.
   @param[in]   IpMode            Indicates whether the IP address is v4 or v6.
   @param[out]  Ip                The storage to return the ASCII string.

   @retval EFI_SUCCESS            The binary IP address is returned in Ip.
   @retval EFI_INVALID_PARAMETER  The IP string is malformatted or IpMode is
                                  invalid.

 **/
 EFI_STATUS
 IScsiAsciiStrToIp (
   IN  CHAR8             *Str,
   IN  UINT8             IpMode,
   OUT EFI_IP_ADDRESS    *Ip
   );

 /**
   Convert the binary encoded buffer into a hexadecimal encoded string.

   @param[in]       BinBuffer   The buffer containing the binary data.
   @param[in]       BinLength   Length of the binary buffer.
   @param[in, out]  HexStr      Pointer to the string.
   @param[in, out]  HexLength   The length of the string.

   @retval EFI_SUCCESS          The binary data is converted to the hexadecimal string
                                and the length of the string is updated.
   @retval EFI_BUFFER_TOO_SMALL The string is too small.
   @retval EFI_BAD_BUFFER_SIZE  BinLength is too large for hex encoding.
   @retval EFI_INVALID_PARAMETER The IP string is malformatted.

 **/
 EFI_STATUS
 IScsiBinToHex (
   IN     UINT8  *BinBuffer,
   IN     UINT32 BinLength,
   IN OUT CHAR8  *HexStr,
   IN OUT UINT32 *HexLength
   );

 /**
   Convert the hexadecimal string into a binary encoded buffer.

   @param[in, out]  BinBuffer    The binary buffer.
   @param[in, out]  BinLength    Length of the binary buffer.
   @param[in]       HexStr       The hexadecimal string.

   @retval EFI_SUCCESS           The hexadecimal string is converted into a
                                 binary encoded buffer.
   @retval EFI_BUFFER_TOO_SMALL  The binary buffer is too small to hold the
                                 converted data.
 **/
 EFI_STATUS
 IScsiHexToBin (
   IN OUT UINT8  *BinBuffer,
   IN OUT UINT32 *BinLength,
   IN     CHAR8  *HexStr
   );


 /**
   Convert the decimal-constant string or hex-constant string into a numerical value.

   @param[in] Str                    String in decimal or hex.

   @return The numerical value.

 **/
 UINTN
 IScsiNetNtoi (
   IN     CHAR8  *Str
   );

 /**
   Generate random numbers.

   @param[in, out]  Rand       The buffer to contain random numbers.
   @param[in]       RandLength The length of the Rand buffer.

 **/
 VOID
 IScsiGenRandom (
   IN OUT UINT8  *Rand,
   IN     UINTN  RandLength
   );

 /**
   Record the NIC information in a global structure.

   @param[in]  Controller         The handle of the controller.
   @param[in]  Image              Handle of the image.

   @retval EFI_SUCCESS            The operation is completed.
   @retval EFI_OUT_OF_RESOURCES   Do not have sufficient resource to finish this
                                  operation.

 **/
 EFI_STATUS
 IScsiAddNic (
   IN EFI_HANDLE  Controller,
   IN EFI_HANDLE  Image
   );

 /**
   Delete the recorded NIC information from a global structure. Also delete corresponding
   attempts.

   @param[in]  Controller         The handle of the controller.

   @retval EFI_SUCCESS            The operation completed.
   @retval EFI_NOT_FOUND          The NIC information to be deleted is not recorded.

 **/
 EFI_STATUS
 IScsiRemoveNic (
   IN EFI_HANDLE  Controller
   );

 /**
   Create and initialize the Attempts.

   @param[in]  AttemptNum          The number of Attempts will be created.

   @retval EFI_SUCCESS             The Attempts have been created successfully.
   @retval Others                  Failed to create the Attempt.

 **/
 EFI_STATUS
 IScsiCreateAttempts (
   IN UINTN            AttemptNum
   );

 /**
   Create the iSCSI configuration Keywords for each attempt.

   @param[in]  KeywordNum          The number Sets of Keywords will be created.

   @retval EFI_SUCCESS             The operation is completed.
   @retval Others                  Failed to create the Keywords.

 **/
 EFI_STATUS
 IScsiCreateKeywords (
   IN UINTN            KeywordNum
   );

 /**

   Free the attempt configure data variable.

 **/
 VOID
 IScsiCleanAttemptVariable (
   IN   VOID
   );

 /**
   Get the recorded NIC information from a global structure by the Index.

   @param[in]  NicIndex          The index indicates the position of NIC info.

   @return Pointer to the NIC info or NULL if not found.

 **/
 ISCSI_NIC_INFO *
 IScsiGetNicInfoByIndex (
   IN UINT8      NicIndex
   );


 /**
   Get the NIC's PCI location and return it according to the composited
   format defined in iSCSI Boot Firmware Table.

   @param[in]   Controller        The handle of the controller.
   @param[out]  Bus               The bus number.
   @param[out]  Device            The device number.
   @param[out]  Function          The function number.

   @return      The composited representation of the NIC PCI location.

 **/
 UINT16
 IScsiGetNICPciLocation (
   IN EFI_HANDLE  Controller,
   OUT UINTN      *Bus,
   OUT UINTN      *Device,
   OUT UINTN      *Function
   );

 /**
   Read the EFI variable (VendorGuid/Name) and return a dynamically allocated
   buffer, and the size of the buffer. If failure, return NULL.

   @param[in]   Name                   String part of EFI variable name.
   @param[in]   VendorGuid             GUID part of EFI variable name.
   @param[out]  VariableSize           Returns the size of the EFI variable that was read.

   @return Dynamically allocated memory that contains a copy of the EFI variable.
   @return Caller is responsible freeing the buffer.
   @retval NULL                   Variable was not read.

 **/
 VOID *
 IScsiGetVariableAndSize (
   IN  CHAR16              *Name,
   IN  EFI_GUID            *VendorGuid,
   OUT UINTN               *VariableSize
   );

 /**
   Create the iSCSI driver data.

   @param[in] Image      The handle of the driver image.
   @param[in] Controller The handle of the controller.

   @return The iSCSI driver data created.
   @retval NULL Other errors as indicated.

 **/
 ISCSI_DRIVER_DATA *
 IScsiCreateDriverData (
   IN EFI_HANDLE  Image,
   IN EFI_HANDLE  Controller
   );

 /**
   Clean the iSCSI driver data.

   @param[in]              Private The iSCSI driver data.

   @retval EFI_SUCCESS     The clean operation is successful.
   @retval Others          Other errors as indicated.

 **/
 EFI_STATUS
 IScsiCleanDriverData (
   IN ISCSI_DRIVER_DATA  *Private
   );

 /**
   Check wheather the Controller handle is configured to use DHCP protocol.

   @param[in]  Controller           The handle of the controller.
   @param[in]  IpVersion            IP_VERSION_4 or IP_VERSION_6.

   @retval TRUE                     The handle of the controller need the Dhcp protocol.
   @retval FALSE                    The handle of the controller does not need the Dhcp protocol.

 **/
 BOOLEAN
 IScsiDhcpIsConfigured (
   IN EFI_HANDLE  Controller,
   IN UINT8       IpVersion
   );

 /**
   Check wheather the Controller handle is configured to use DNS protocol.

   @param[in]  Controller           The handle of the controller.

   @retval TRUE                     The handle of the controller need the DNS protocol.
   @retval FALSE                    The handle of the controller does not need the DNS protocol.

 **/
 BOOLEAN
 IScsiDnsIsConfigured (
   IN EFI_HANDLE  Controller
   );

 /**
   Get the various configuration data of this iSCSI instance.

   @param[in]  Private   The iSCSI driver data.

   @retval EFI_SUCCESS   Obtained the configuration of this instance.
   @retval EFI_ABORTED   The operation was aborted.
   @retval Others        Other errors as indicated.

 **/
 EFI_STATUS
 IScsiGetConfigData (
   IN ISCSI_DRIVER_DATA  *Private
   );

 /**
   Get the device path of the iSCSI tcp connection and update it.

   @param[in]  Session The iSCSI session data.

   @return The updated device path.
   @retval NULL Other errors as indicated.

 **/
 EFI_DEVICE_PATH_PROTOCOL *
 IScsiGetTcpConnDevicePath (
   IN ISCSI_SESSION      *Session
   );

 /**
   Abort the session when the transition from BS to RT is initiated.

   @param[in]   Event  The event signaled.
   @param[in]  Context The iSCSI driver data.

 **/
 VOID
 EFIAPI
 IScsiOnExitBootService (
   IN EFI_EVENT  Event,
   IN VOID       *Context
   );

 /**
   Tests whether a controller handle is being managed by IScsi driver.

   This function tests whether the driver specified by DriverBindingHandle is
   currently managing the controller specified by ControllerHandle.  This test
   is performed by evaluating if the protocol specified by ProtocolGuid is
   present on ControllerHandle and is was opened by DriverBindingHandle and Nic
   Device handle with an attribute of EFI_OPEN_PROTOCOL_BY_DRIVER.
   If ProtocolGuid is NULL, then ASSERT().

   @param  ControllerHandle     A handle for a controller to test.
   @param  DriverBindingHandle  Specifies the driver binding handle for the
                                driver.
   @param  ProtocolGuid         Specifies the protocol that the driver specified
                                by DriverBindingHandle opens in its Start()
                                function.

   @retval EFI_SUCCESS          ControllerHandle is managed by the driver
                                specified by DriverBindingHandle.
   @retval EFI_UNSUPPORTED      ControllerHandle is not managed by the driver
                                specified by DriverBindingHandle.

 **/
 EFI_STATUS
 EFIAPI
 IScsiTestManagedDevice (
   IN  EFI_HANDLE       ControllerHandle,
   IN  EFI_HANDLE       DriverBindingHandle,
   IN  EFI_GUID         *ProtocolGuid
   );
 #endif
	/** @file
	Miscellaneous definitions for iSCSI driver.

	Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
	SPDX-License-Identifier: BSD-2-Clause-Patent

	**/

	#ifndef _ISCSI_MISC_H_
	#define _ISCSI_MISC_H_

	typedef struct _ISCSI_DRIVER_DATA ISCSI_DRIVER_DATA;

	///
	/// IPv4 Device Path Node Length
	///
	#define IP4_NODE_LEN_NEW_VERSIONS 27

	///
	/// IPv6 Device Path Node Length
	///
	#define IP6_NODE_LEN_OLD_VERSIONS 43
	#define IP6_NODE_LEN_NEW_VERSIONS 60

	///
	/// The ignored field StaticIpAddress's offset in old IPv6 Device Path
	///
	#define IP6_OLD_IPADDRESS_OFFSET 42


	#pragma pack(1)
	typedef struct _ISCSI_SESSION_CONFIG_NVDATA {
	UINT16 TargetPort;
	UINT8 Enabled;
	UINT8 IpMode;

	EFI_IP_ADDRESS LocalIp;
	EFI_IPv4_ADDRESS SubnetMask;
	EFI_IP_ADDRESS Gateway;

	BOOLEAN InitiatorInfoFromDhcp;
	BOOLEAN TargetInfoFromDhcp;

	CHAR8 TargetName[ISCSI_NAME_MAX_SIZE];
	EFI_IP_ADDRESS TargetIp;
	UINT8 PrefixLength;
	UINT8 BootLun[8];

	UINT16 ConnectTimeout; ///< timeout value in milliseconds.
	UINT8 ConnectRetryCount;
	UINT8 IsId[6];

	BOOLEAN RedirectFlag;
	UINT16 OriginalTargetPort; // The port of proxy/virtual target.
	EFI_IP_ADDRESS OriginalTargetIp; // The address of proxy/virtual target.

	BOOLEAN DnsMode; // Flag indicate whether the Target address is expressed as URL format.
	CHAR8 TargetUrl[ISCSI_TARGET_URI_MAX_SIZE];

	} ISCSI_SESSION_CONFIG_NVDATA;
	#pragma pack()

	/**
	Calculate the prefix length of the IPv4 subnet mask.

	@param[in] SubnetMask The IPv4 subnet mask.

	@return The prefix length of the subnet mask.
	@retval 0 Other errors as indicated.

	**/
	UINT8
	IScsiGetSubnetMaskPrefixLength (
	IN EFI_IPv4_ADDRESS *SubnetMask
	);

	/**
	Convert the hexadecimal encoded LUN string into the 64-bit LUN.

	@param[in] Str The hexadecimal encoded LUN string.
	@param[out] Lun Storage to return the 64-bit LUN.

	@retval EFI_SUCCESS The 64-bit LUN is stored in Lun.
	@retval EFI_INVALID_PARAMETER The string is malformatted.

	**/
	EFI_STATUS
	IScsiAsciiStrToLun (
	IN CHAR8 *Str,
	OUT UINT8 *Lun
	);

	/**
	Convert the 64-bit LUN into the hexadecimal encoded LUN string.

	@param[in] Lun The 64-bit LUN.
	@param[out] String The storage to return the hexadecimal encoded LUN string.

	**/
	VOID
	IScsiLunToUnicodeStr (
	IN UINT8 *Lun,
	OUT CHAR16 *String
	);

	/**
	Convert the mac address into a hexadecimal encoded "-" separated string.

	@param[in] Mac The mac address.
	@param[in] Len Length in bytes of the mac address.
	@param[in] VlanId VLAN ID of the network device.
	@param[out] Str The storage to return the mac string.

	**/
	VOID
	IScsiMacAddrToStr (
	IN EFI_MAC_ADDRESS *Mac,
	IN UINT32 Len,
	IN UINT16 VlanId,
	OUT CHAR16 *Str
	);

	/**
	Convert the formatted IP address into the binary IP address.

	@param[in] Str The UNICODE string.
	@param[in] IpMode Indicates whether the IP address is v4 or v6.
	@param[out] Ip The storage to return the ASCII string.

	@retval EFI_SUCCESS The binary IP address is returned in Ip.
	@retval EFI_INVALID_PARAMETER The IP string is malformatted or IpMode is
	invalid.

	**/
	EFI_STATUS
	IScsiAsciiStrToIp (
	IN CHAR8 *Str,
	IN UINT8 IpMode,
	OUT EFI_IP_ADDRESS *Ip
	);

	/**
	Convert the binary encoded buffer into a hexadecimal encoded string.

	@param[in] BinBuffer The buffer containing the binary data.
	@param[in] BinLength Length of the binary buffer.
	@param[in, out] HexStr Pointer to the string.
	@param[in, out] HexLength The length of the string.

	@retval EFI_SUCCESS The binary data is converted to the hexadecimal string
	and the length of the string is updated.
	@retval EFI_BUFFER_TOO_SMALL The string is too small.
	@retval EFI_BAD_BUFFER_SIZE BinLength is too large for hex encoding.
	@retval EFI_INVALID_PARAMETER The IP string is malformatted.

	**/
	EFI_STATUS
	IScsiBinToHex (
	IN UINT8 *BinBuffer,
	IN UINT32 BinLength,
	IN OUT CHAR8 *HexStr,
	IN OUT UINT32 *HexLength
	);

	/**
	Convert the hexadecimal string into a binary encoded buffer.

	@param[in, out] BinBuffer The binary buffer.
	@param[in, out] BinLength Length of the binary buffer.
	@param[in] HexStr The hexadecimal string.

	@retval EFI_SUCCESS The hexadecimal string is converted into a
	binary encoded buffer.
	@retval EFI_BUFFER_TOO_SMALL The binary buffer is too small to hold the
	converted data.
	**/
	EFI_STATUS
	IScsiHexToBin (
	IN OUT UINT8 *BinBuffer,
	IN OUT UINT32 *BinLength,
	IN CHAR8 *HexStr
	);


	/**
	Convert the decimal-constant string or hex-constant string into a numerical value.

	@param[in] Str String in decimal or hex.

	@return The numerical value.

	**/
	UINTN
	IScsiNetNtoi (
	IN CHAR8 *Str
	);

	/**
	Generate random numbers.

	@param[in, out] Rand The buffer to contain random numbers.
	@param[in] RandLength The length of the Rand buffer.

	**/
	VOID
	IScsiGenRandom (
	IN OUT UINT8 *Rand,
	IN UINTN RandLength
	);

	/**
	Record the NIC information in a global structure.

	@param[in] Controller The handle of the controller.
	@param[in] Image Handle of the image.

	@retval EFI_SUCCESS The operation is completed.
	@retval EFI_OUT_OF_RESOURCES Do not have sufficient resource to finish this
	operation.

	**/
	EFI_STATUS
	IScsiAddNic (
	IN EFI_HANDLE Controller,
	IN EFI_HANDLE Image
	);

	/**
	Delete the recorded NIC information from a global structure. Also delete corresponding
	attempts.

	@param[in] Controller The handle of the controller.

	@retval EFI_SUCCESS The operation completed.
	@retval EFI_NOT_FOUND The NIC information to be deleted is not recorded.

	**/
	EFI_STATUS
	IScsiRemoveNic (
	IN EFI_HANDLE Controller
	);

	/**
	Create and initialize the Attempts.

	@param[in] AttemptNum The number of Attempts will be created.

	@retval EFI_SUCCESS The Attempts have been created successfully.
	@retval Others Failed to create the Attempt.

	**/
	EFI_STATUS
	IScsiCreateAttempts (
	IN UINTN AttemptNum
	);

	/**
	Create the iSCSI configuration Keywords for each attempt.

	@param[in] KeywordNum The number Sets of Keywords will be created.

	@retval EFI_SUCCESS The operation is completed.
	@retval Others Failed to create the Keywords.

	**/
	EFI_STATUS
	IScsiCreateKeywords (
	IN UINTN KeywordNum
	);

	/**

	Free the attempt configure data variable.

	**/
	VOID
	IScsiCleanAttemptVariable (
	IN VOID
	);

	/**
	Get the recorded NIC information from a global structure by the Index.

	@param[in] NicIndex The index indicates the position of NIC info.

	@return Pointer to the NIC info or NULL if not found.

	**/
	ISCSI_NIC_INFO *
	IScsiGetNicInfoByIndex (
	IN UINT8 NicIndex
	);


	/**
	Get the NIC's PCI location and return it according to the composited
	format defined in iSCSI Boot Firmware Table.

	@param[in] Controller The handle of the controller.
	@param[out] Bus The bus number.
	@param[out] Device The device number.
	@param[out] Function The function number.

	@return The composited representation of the NIC PCI location.

	**/
	UINT16
	IScsiGetNICPciLocation (
	IN EFI_HANDLE Controller,
	OUT UINTN *Bus,
	OUT UINTN *Device,
	OUT UINTN *Function
	);

	/**
	Read the EFI variable (VendorGuid/Name) and return a dynamically allocated
	buffer, and the size of the buffer. If failure, return NULL.

	@param[in] Name String part of EFI variable name.
	@param[in] VendorGuid GUID part of EFI variable name.
	@param[out] VariableSize Returns the size of the EFI variable that was read.

	@return Dynamically allocated memory that contains a copy of the EFI variable.
	@return Caller is responsible freeing the buffer.
	@retval NULL Variable was not read.

	**/
	VOID *
	IScsiGetVariableAndSize (
	IN CHAR16 *Name,
	IN EFI_GUID *VendorGuid,
	OUT UINTN *VariableSize
	);

	/**
	Create the iSCSI driver data.

	@param[in] Image The handle of the driver image.
	@param[in] Controller The handle of the controller.

	@return The iSCSI driver data created.
	@retval NULL Other errors as indicated.

	**/
	ISCSI_DRIVER_DATA *
	IScsiCreateDriverData (
	IN EFI_HANDLE Image,
	IN EFI_HANDLE Controller
	);

	/**
	Clean the iSCSI driver data.

	@param[in] Private The iSCSI driver data.

	@retval EFI_SUCCESS The clean operation is successful.
	@retval Others Other errors as indicated.

	**/
	EFI_STATUS
	IScsiCleanDriverData (
	IN ISCSI_DRIVER_DATA *Private
	);

	/**
	Check wheather the Controller handle is configured to use DHCP protocol.

	@param[in] Controller The handle of the controller.
	@param[in] IpVersion IP_VERSION_4 or IP_VERSION_6.

	@retval TRUE The handle of the controller need the Dhcp protocol.
	@retval FALSE The handle of the controller does not need the Dhcp protocol.

	**/
	BOOLEAN
	IScsiDhcpIsConfigured (
	IN EFI_HANDLE Controller,
	IN UINT8 IpVersion
	);

	/**
	Check wheather the Controller handle is configured to use DNS protocol.

	@param[in] Controller The handle of the controller.

	@retval TRUE The handle of the controller need the DNS protocol.
	@retval FALSE The handle of the controller does not need the DNS protocol.

	**/
	BOOLEAN
	IScsiDnsIsConfigured (
	IN EFI_HANDLE Controller
	);

	/**
	Get the various configuration data of this iSCSI instance.

	@param[in] Private The iSCSI driver data.

	@retval EFI_SUCCESS Obtained the configuration of this instance.
	@retval EFI_ABORTED The operation was aborted.
	@retval Others Other errors as indicated.

	**/
	EFI_STATUS
	IScsiGetConfigData (
	IN ISCSI_DRIVER_DATA *Private
	);

	/**
	Get the device path of the iSCSI tcp connection and update it.

	@param[in] Session The iSCSI session data.

	@return The updated device path.
	@retval NULL Other errors as indicated.

	**/
	EFI_DEVICE_PATH_PROTOCOL *
	IScsiGetTcpConnDevicePath (
	IN ISCSI_SESSION *Session
	);

	/**
	Abort the session when the transition from BS to RT is initiated.

	@param[in] Event The event signaled.
	@param[in] Context The iSCSI driver data.

	**/
	VOID
	EFIAPI
	IScsiOnExitBootService (
	IN EFI_EVENT Event,
	IN VOID *Context
	);

	/**
	Tests whether a controller handle is being managed by IScsi driver.

	This function tests whether the driver specified by DriverBindingHandle is
	currently managing the controller specified by ControllerHandle. This test
	is performed by evaluating if the protocol specified by ProtocolGuid is
	present on ControllerHandle and is was opened by DriverBindingHandle and Nic
	Device handle with an attribute of EFI_OPEN_PROTOCOL_BY_DRIVER.
	If ProtocolGuid is NULL, then ASSERT().

	@param ControllerHandle A handle for a controller to test.
	@param DriverBindingHandle Specifies the driver binding handle for the
	driver.
	@param ProtocolGuid Specifies the protocol that the driver specified
	by DriverBindingHandle opens in its Start()
	function.

	@retval EFI_SUCCESS ControllerHandle is managed by the driver
	specified by DriverBindingHandle.
	@retval EFI_UNSUPPORTED ControllerHandle is not managed by the driver
	specified by DriverBindingHandle.

	**/
	EFI_STATUS
	EFIAPI
	IScsiTestManagedDevice (
	IN EFI_HANDLE ControllerHandle,
	IN EFI_HANDLE DriverBindingHandle,
	IN EFI_GUID *ProtocolGuid
	);
	#endif