OvmfPkg/XenPlatformPei/Platform.c

/**@file
  Platform PEI driver

  Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
  Copyright (c) 2011, Andrei Warkentin <andreiw@motorola.com>
  Copyright (c) 2019, Citrix Systems, Inc.

  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

//
// The package level header files this module uses
//
#include <PiPei.h>

//
// The Library classes this module consumes
//
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/HobLib.h>
#include <Library/IoLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/PcdLib.h>
#include <Library/PciLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
#include <Library/ResourcePublicationLib.h>
#include <Guid/MemoryTypeInformation.h>
#include <Ppi/MasterBootMode.h>
#include <IndustryStandard/Pci22.h>
#include <OvmfPlatforms.h>

#include "Platform.h"
#include "Cmos.h"

EFI_MEMORY_TYPE_INFORMATION mDefaultMemoryTypeInformation[] = {
  { EfiACPIMemoryNVS,       0x004 },
  { EfiACPIReclaimMemory,   0x008 },
  { EfiReservedMemoryType,  0x004 },
  { EfiRuntimeServicesData, 0x024 },
  { EfiRuntimeServicesCode, 0x030 },
  { EfiBootServicesCode,    0x180 },
  { EfiBootServicesData,    0xF00 },
  { EfiMaxMemoryType,       0x000 }
};


EFI_PEI_PPI_DESCRIPTOR   mPpiBootMode[] = {
  {
    EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
    &gEfiPeiMasterBootModePpiGuid,
    NULL
  }
};


UINT16 mHostBridgeDevId;

EFI_BOOT_MODE mBootMode = BOOT_WITH_FULL_CONFIGURATION;


VOID
AddIoMemoryBaseSizeHob (
  EFI_PHYSICAL_ADDRESS        MemoryBase,
  UINT64                      MemorySize
  )
{
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_MAPPED_IO,
      EFI_RESOURCE_ATTRIBUTE_PRESENT     |
      EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
      EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
      EFI_RESOURCE_ATTRIBUTE_TESTED,
    MemoryBase,
    MemorySize
    );
}

VOID
AddReservedMemoryBaseSizeHob (
  EFI_PHYSICAL_ADDRESS        MemoryBase,
  UINT64                      MemorySize,
  BOOLEAN                     Cacheable
  )
{
  BuildResourceDescriptorHob (
    EFI_RESOURCE_MEMORY_RESERVED,
      EFI_RESOURCE_ATTRIBUTE_PRESENT     |
      EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
      EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
      (Cacheable ?
       EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
       EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE :
       0
       ) |
      EFI_RESOURCE_ATTRIBUTE_TESTED,
    MemoryBase,
    MemorySize
    );
}

VOID
AddReservedMemoryRangeHob (
  EFI_PHYSICAL_ADDRESS        MemoryBase,
  EFI_PHYSICAL_ADDRESS        MemoryLimit,
  BOOLEAN                     Cacheable
  )
{
  AddReservedMemoryBaseSizeHob (MemoryBase,
    (UINT64)(MemoryLimit - MemoryBase), Cacheable);
}

VOID
AddIoMemoryRangeHob (
  EFI_PHYSICAL_ADDRESS        MemoryBase,
  EFI_PHYSICAL_ADDRESS        MemoryLimit
  )
{
  AddIoMemoryBaseSizeHob (MemoryBase, (UINT64)(MemoryLimit - MemoryBase));
}


VOID
AddMemoryBaseSizeHob (
  EFI_PHYSICAL_ADDRESS        MemoryBase,
  UINT64                      MemorySize
  )
{
  BuildResourceDescriptorHob (
    EFI_RESOURCE_SYSTEM_MEMORY,
      EFI_RESOURCE_ATTRIBUTE_PRESENT |
      EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
      EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
      EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
      EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
      EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
      EFI_RESOURCE_ATTRIBUTE_TESTED,
    MemoryBase,
    MemorySize
    );
}


VOID
AddMemoryRangeHob (
  EFI_PHYSICAL_ADDRESS        MemoryBase,
  EFI_PHYSICAL_ADDRESS        MemoryLimit
  )
{
  AddMemoryBaseSizeHob (MemoryBase, (UINT64)(MemoryLimit - MemoryBase));
}


VOID
MemMapInitialization (
  VOID
  )
{
  UINT64        PciIoBase;
  UINT64        PciIoSize;
  RETURN_STATUS PcdStatus;

  PciIoBase = 0xC000;
  PciIoSize = 0x4000;

  //
  // Create Memory Type Information HOB
  //
  BuildGuidDataHob (
    &gEfiMemoryTypeInformationGuid,
    mDefaultMemoryTypeInformation,
    sizeof(mDefaultMemoryTypeInformation)
    );

  //
  // Video memory + Legacy BIOS region
  //
  AddIoMemoryRangeHob (0x0A0000, BASE_1MB);

  //
  // Add PCI IO Port space available for PCI resource allocations.
  //
  BuildResourceDescriptorHob (
    EFI_RESOURCE_IO,
    EFI_RESOURCE_ATTRIBUTE_PRESENT     |
    EFI_RESOURCE_ATTRIBUTE_INITIALIZED,
    PciIoBase,
    PciIoSize
    );
  PcdStatus = PcdSet64S (PcdPciIoBase, PciIoBase);
  ASSERT_RETURN_ERROR (PcdStatus);
  PcdStatus = PcdSet64S (PcdPciIoSize, PciIoSize);
  ASSERT_RETURN_ERROR (PcdStatus);
}

VOID
PciExBarInitialization (
  VOID
  )
{
  union {
    UINT64 Uint64;
    UINT32 Uint32[2];
  } PciExBarBase;

  //
  // We only support the 256MB size for the MMCONFIG area:
  // 256 buses * 32 devices * 8 functions * 4096 bytes config space.
  //
  // The masks used below enforce the Q35 requirements that the MMCONFIG area
  // be (a) correctly aligned -- here at 256 MB --, (b) located under 64 GB.
  //
  // Note that (b) also ensures that the minimum address width we have
  // determined in AddressWidthInitialization(), i.e., 36 bits, will suffice
  // for DXE's page tables to cover the MMCONFIG area.
  //
  PciExBarBase.Uint64 = FixedPcdGet64 (PcdPciExpressBaseAddress);
  ASSERT ((PciExBarBase.Uint32[1] & MCH_PCIEXBAR_HIGHMASK) == 0);
  ASSERT ((PciExBarBase.Uint32[0] & MCH_PCIEXBAR_LOWMASK) == 0);

  //
  // Clear the PCIEXBAREN bit first, before programming the high register.
  //
  PciWrite32 (DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_LOW), 0);

  //
  // Program the high register. Then program the low register, setting the
  // MMCONFIG area size and enabling decoding at once.
  //
  PciWrite32 (DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_HIGH), PciExBarBase.Uint32[1]);
  PciWrite32 (
    DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_LOW),
    PciExBarBase.Uint32[0] | MCH_PCIEXBAR_BUS_FF | MCH_PCIEXBAR_EN
    );
}

VOID
MiscInitialization (
  VOID
  )
{
  UINTN         PmCmd;
  UINTN         Pmba;
  UINT32        PmbaAndVal;
  UINT32        PmbaOrVal;
  UINTN         AcpiCtlReg;
  UINT8         AcpiEnBit;
  RETURN_STATUS PcdStatus;

  //
  // Disable A20 Mask
  //
  IoOr8 (0x92, BIT1);

  //
  // Build the CPU HOB with guest RAM size dependent address width and 16-bits
  // of IO space. (Side note: unlike other HOBs, the CPU HOB is needed during
  // S3 resume as well, so we build it unconditionally.)
  //
  BuildCpuHob (mPhysMemAddressWidth, 16);

  //
  // Determine platform type and save Host Bridge DID to PCD
  //
  switch (mHostBridgeDevId) {
    case INTEL_82441_DEVICE_ID:
      PmCmd      = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
      Pmba       = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
      PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
      PmbaOrVal  = PIIX4_PMBA_VALUE;
      AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
      AcpiEnBit  = PIIX4_PMREGMISC_PMIOSE;
      break;
    case INTEL_Q35_MCH_DEVICE_ID:
      PmCmd      = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
      Pmba       = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
      PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
      PmbaOrVal  = ICH9_PMBASE_VALUE;
      AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
      AcpiEnBit  = ICH9_ACPI_CNTL_ACPI_EN;
      break;
    default:
      if (XenPvhDetected ()) {
        //
        // There is no PCI bus in this case
        //
        return;
      }
      DEBUG ((DEBUG_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
        __FUNCTION__, mHostBridgeDevId));
      ASSERT (FALSE);
      return;
  }
  PcdStatus = PcdSet16S (PcdOvmfHostBridgePciDevId, mHostBridgeDevId);
  ASSERT_RETURN_ERROR (PcdStatus);

  //
  // If the appropriate IOspace enable bit is set, assume the ACPI PMBA
  // has been configured (e.g., by Xen) and skip the setup here.
  // This matches the logic in AcpiTimerLibConstructor ().
  //
  if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
    //
    // The PEI phase should be exited with fully accessibe ACPI PM IO space:
    // 1. set PMBA
    //
    PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);

    //
    // 2. set PCICMD/IOSE
    //
    PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);

    //
    // 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
    //
    PciOr8 (AcpiCtlReg, AcpiEnBit);
  }

  if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
    //
    // Set Root Complex Register Block BAR
    //
    PciWrite32 (
      POWER_MGMT_REGISTER_Q35 (ICH9_RCBA),
      ICH9_ROOT_COMPLEX_BASE | ICH9_RCBA_EN
      );

    //
    // Set PCI Express Register Range Base Address
    //
    PciExBarInitialization ();
  }
}


VOID
BootModeInitialization (
  VOID
  )
{
  EFI_STATUS    Status;

  if (CmosRead8 (0xF) == 0xFE) {
    mBootMode = BOOT_ON_S3_RESUME;
  }
  CmosWrite8 (0xF, 0x00);

  Status = PeiServicesSetBootMode (mBootMode);
  ASSERT_EFI_ERROR (Status);

  Status = PeiServicesInstallPpi (mPpiBootMode);
  ASSERT_EFI_ERROR (Status);
}


VOID
ReserveEmuVariableNvStore (
  )
{
  EFI_PHYSICAL_ADDRESS VariableStore;
  RETURN_STATUS        PcdStatus;

  //
  // Allocate storage for NV variables early on so it will be
  // at a consistent address.  Since VM memory is preserved
  // across reboots, this allows the NV variable storage to survive
  // a VM reboot.
  //
  VariableStore =
    (EFI_PHYSICAL_ADDRESS)(UINTN)
      AllocateRuntimePages (
        EFI_SIZE_TO_PAGES (2 * PcdGet32 (PcdFlashNvStorageFtwSpareSize))
        );
  DEBUG ((DEBUG_INFO,
          "Reserved variable store memory: 0x%lX; size: %dkb\n",
          VariableStore,
          (2 * PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / 1024
        ));
  PcdStatus = PcdSet64S (PcdEmuVariableNvStoreReserved, VariableStore);
  ASSERT_RETURN_ERROR (PcdStatus);
}


VOID
DebugDumpCmos (
  VOID
  )
{
  UINT32 Loop;

  DEBUG ((DEBUG_INFO, "CMOS:\n"));

  for (Loop = 0; Loop < 0x80; Loop++) {
    if ((Loop % 0x10) == 0) {
      DEBUG ((DEBUG_INFO, "%02x:", Loop));
    }
    DEBUG ((DEBUG_INFO, " %02x", CmosRead8 (Loop)));
    if ((Loop % 0x10) == 0xf) {
      DEBUG ((DEBUG_INFO, "\n"));
    }
  }
}



/**
  Perform Platform PEI initialization.

  @param  FileHandle      Handle of the file being invoked.
  @param  PeiServices     Describes the list of possible PEI Services.

  @return EFI_SUCCESS     The PEIM initialized successfully.

**/
EFI_STATUS
EFIAPI
InitializeXenPlatform (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  DEBUG ((DEBUG_INFO, "Platform PEIM Loaded\n"));

  DebugDumpCmos ();

  if (!XenDetect ()) {
    DEBUG ((DEBUG_ERROR, "ERROR: Xen isn't detected\n"));
    ASSERT (FALSE);
    CpuDeadLoop ();
  }

  XenConnect ();

  BootModeInitialization ();
  AddressWidthInitialization ();

  //
  // Query Host Bridge DID
  //
  mHostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);

  PublishPeiMemory ();

  InitializeRamRegions ();

  InitializeXen ();
  CalibrateLapicTimer ();

  if (mBootMode != BOOT_ON_S3_RESUME) {
    ReserveEmuVariableNvStore ();
    PeiFvInitialization ();
    MemMapInitialization ();
  }

  InstallClearCacheCallback ();
  AmdSevInitialize ();
  MiscInitialization ();

  return EFI_SUCCESS;
}