| // *++ | |
| // | |
| // Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR> | |
| // SPDX-License-Identifier: BSD-2-Clause-Patent | |
| // | |
| // Module Name: | |
| // | |
| // IScsiConfigStrings.uni | |
| // | |
| // Abstract: | |
| // | |
| // String definitions for iSCSI configuration. | |
| // | |
| // Revision History: | |
| // | |
| // --*/ | |
| /=# | |
| #langdef en-US "English" | |
| #langdef x-UEFI-ns "UefiNameSpace" | |
| #string STR_ISCSI_CONFIG_FORM_TITLE #language en-US "iSCSI Configuration" | |
| #string STR_ISCSI_CONFIG_FORM_HELP #language en-US "Configure the iSCSI parameters." | |
| #string STR_ISCSI_MAIN_FORM_TITLE #language en-US "iSCSI Configuration" | |
| #string STR_ISCSI_MAC_FORM_TITLE #language en-US "MAC Selection" | |
| #string STR_ISCSI_CONFIG_INIT_NAME #language en-US "iSCSI Initiator Name" | |
| #language x-UEFI-ns "iSCSIInitiatorName" | |
| #string STR_ISCSI_CONFIG_INIT_NAME_HELP #language en-US "The worldwide unique name of iSCSI Initiator. Only IQN format is accepted." | |
| #string STR_ISCSI_ATTEMPT_NAME #language en-US "iSCSI Attempt Name" | |
| #string STR_ISCSI_ATTEMPT_NAME_HELP #language en-US "The human name defined for this attempt." | |
| #string STR_ISCSI_CONFIG_RETRY #language en-US "Connection Retry Count" | |
| #string STR_ISCSI_CONFIG_RETRY_HELP #language en-US "The minimum value is 0 and the maximum is 16. 0 means no retry." | |
| #string STR_ISCSI_CONFIG_TIMEOUT #language en-US "Connection Establishing Timeout" | |
| #string STR_ISCSI_CONFIG_TIMEOUT_HELP #language en-US "The timeout value in milliseconds. The minimum value is 100 milliseconds and the maximum is 20 seconds." | |
| #string STR_ADD_ATTEMPT_ENTRY #language en-US "Add an Attempt" | |
| #string STR_ISCSI_ATTEMPT_FORM_TITLE #language en-US "Attempt Configuration" | |
| #string STR_DEL_ATTEMPT_ENTRY #language en-US "Delete Attempts" | |
| #string STR_DEL_ATTEMPT_ENTRY_HELP #language en-US "Delete one or more attempts" | |
| #string STR_ORDER_ATTEMPT_ENTRY #language en-US "Change Attempt Order" | |
| #string STR_ISCSI_MODE_PROMPT #language en-US "iSCSI Mode" | |
| #string STR_ISCSI_MODE_HELP #language en-US "Disabled, Enabled, Enabled for MPIO" | |
| #string STR_ISCSI_MODE_DISABLED #language en-US "Disabled" | |
| #string STR_ISCSI_MODE_ENABLED #language en-US "Enabled" | |
| #string STR_ISCSI_MODE_ENABLED_FOR_MPIO #language en-US "Enabled for MPIO" | |
| #string STR_IP_MODE_PROMPT #language en-US "Internet Protocol" | |
| #string STR_IP_MODE_HELP #language en-US "Initiator IP address is system assigned in IP6 mode. In Autoconfigure mode, iSCSI driver will attempt to connect iSCSI target via IPv4 stack, if failed then attempt IPv6 stack." | |
| #string STR_IP_MODE_IP4 #language en-US "IP4" | |
| #string STR_IP_MODE_IP6 #language en-US "IP6" | |
| #string STR_IP_MODE_AUTOCONFIG #language en-US "Autoconfigure" | |
| #string STR_AUTHEN_TYPE_PROMPT #language en-US "Authentication Type" | |
| #string STR_AUTHEN_TYPE_HELP #language en-US "Authentication method: CHAP, Kerberos, or None" | |
| #string STR_AUTHEN_TYPE_CHAP #language en-US "CHAP" | |
| #string STR_AUTHEN_TYPE_KERBEROS #language en-US "Kerberos" | |
| #string STR_AUTHEN_TYPE_NONE #language en-US "None" | |
| #string STR_ISCSI_LOCAL_IP_ADDRESS #language en-US " Initiator IP Address" | |
| #string STR_ISCSI_LOCAL_MASK #language en-US " Initiator Subnet Mask" | |
| #string STR_ISCSI_LOCAL_GATEWAY #language en-US " Gateway" | |
| #string STR_ISCSI_IP_ADDRESS_HELP #language en-US "Enter IP address in dotted-decimal notation." | |
| #string STR_ISCSI_TARGET_NAME #language en-US " Target Name" | |
| #string STR_ISCSI_TARGET_NAME_HELP #language en-US "The worldwide unique name of the target. Only iqn. format is accepted." | |
| #string STR_ISCSI_TARGET_ADDRESS #language en-US " Target Address" | |
| #string STR_ISCSI_TARGET_ADDRESS_HELP #language en-US "Enter Target address in IPv4,IPv6 or URL format.You need to configure DNS server address in advance if input a URL string." | |
| #string STR_ISCSI_TARGET_PORT #language en-US " Target Port" | |
| #string STR_ISCSI_BOOT_LUN #language en-US " Boot LUN" | |
| #string STR_ISCSI_BOOT_LUN_HELP #language en-US "Hexadecimal representation of the LU number. Examples are: 4752-3A4F-6b7e-2F99, 6734-9-156f-127, 4186-9" | |
| #string STR_ISCSI_ENABLE_DHCP #language en-US "Enable DHCP" | |
| #string STR_ISCSI_ENABLE_DHCP_ON_TARGET #language en-US "Get target info via DHCP" | |
| #string STR_CHAP_TYPE_PROMPT #language en-US " CHAP Type" | |
| #string STR_CHAP_TYPE_HELP #language en-US "None, One way CHAP or mutual CHAP" | |
| #string STR_CHAP_TYPE_UNI #language en-US "One way" | |
| #string STR_CHAP_TYPE_MUTUAL #language en-US "Mutual" | |
| #string STR_ISCSI_CHAP_NAME #language en-US " CHAP Name" | |
| #string STR_ISCSI_CHAP_SECRET #language en-US " CHAP Secret" | |
| #string STR_ISCSI_CHAP_SECRET_HELP #language en-US "The minimum length is 12 bytes and the maximum length is 16 bytes." | |
| #string STR_ISCSI_REVERSE_CHAP_NAME #language en-US " Reverse CHAP Name" | |
| #string STR_ISCSI_REVERSE_CHAP_SECRET #language en-US " Reverse CHAP Secret" | |
| #string STR_RETURN_MAIN_FORM #language en-US "Back to Previous Page" | |
| #string STR_SAVE_CHANGES #language en-US "Save Changes" | |
| #string STR_SAVE_CHANGES_HELP #language en-US "Must reboot system manually for changes to take place." | |
| #string STR_NULL #language en-US "" | |
| #string STR_SAVE_AND_EXIT #language en-US "Commit Changes and Exit" | |
| #string STR_NO_SAVE_AND_EXIT #language en-US "Discard Changes and Exit" | |
| #string STR_ISCSI_CONFIG_ISID #language en-US "ISID" | |
| #string STR_ISCSI_CONFIG_ISID_HELP #language en-US "OUI-format ISID in 6 bytes, default value are derived from MAC address. Only last 3 bytes are configurable. Example: update 0ABBCCDDEEFF to 0ABBCCF07901 by input F07901." | |
| #string STR_ISCSI_MAC_PROMPT #language en-US "Configure the mac address for the attempt" | |
| #language x-UEFI-ns "iSCSIMacAddr" | |
| #string STR_ISCSI_ADD_ATTEMPTS #language en-US "Add Attempts" | |
| #language x-UEFI-ns "iSCSIAddAttempts" | |
| #string STR_ISCSI_DELETE_ATTEMPTS #language en-US "Delete Attempts" | |
| #language x-UEFI-ns "iSCSIDeleteAttempts" | |
| #string STR_ISCSI_DISPLAY_ATTEMPTS #language en-US "Display Attempts" | |
| #language x-UEFI-ns "iSCSIDisplayAttemptList" | |
| #string STR_ISCSI_ATTEMPT_ORDER #language en-US "New Attempt Order" | |
| #language x-UEFI-ns "iSCSIAttemptOrder" | |
| #string STR_ISCSI_ISID_HELP #language en-US "The iSCSI ISID. Default value are derived from MAC address. Only last 3 bytes are configurable." |