Google Git
Sign in
fuchsia / third_party / edk2 / 3e72ffe8afdd03f1f89eba65c921cbdcb004cfee / . / MdeModulePkg / Library / PiDxeS3BootScriptLib / BootScriptSave.c
blob: fe2d3a0284080ee93e26f5314dadcefe46e11dfd [file] [log] [blame]
/** @file
Save the S3 data to S3 boot script.
Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "InternalBootScriptLib.h"
/**
Data structure usage:
+------------------------------+<------- PcdS3BootScriptTablePrivateDataPtr
| SCRIPT_TABLE_PRIVATE_DATA | (mS3BootScriptTablePtr, Before SmmReadyToLock)
| TableBase |--- PcdS3BootScriptTablePrivateSmmDataPtr
| TableLength |--|-- (mS3BootScriptTablePtr = mS3BootScriptTableSmmPtr, After SmmReadyToLock InSmm)
| TableMemoryPageNumber |--|-|----
| AtRuntime | | | |
| InSmm | | | |
| BootTimeScriptLength |--|-|---|---
| SmmLocked | | | | |
| BackFromS3 | | | | |
+------------------------------+ | | | |
| | | |
+------------------------------+<-- | | |
| EFI_BOOT_SCRIPT_TABLE_HEADER | | | |
| TableLength |----|-- | |
+------------------------------+ | | | |
| ...... | | | | |
+------------------------------+<---- | | |
| EFI_BOOT_SCRIPT_TERMINATE | | | |
+------------------------------+<------ | |
| |
| |
mBootScriptDataBootTimeGuid LockBox: | |
Used to restore data after back from S3| |
to handle potential INSERT boot script | |
at runtime. | |
+------------------------------+ | |
| Boot Time Boot Script | | |
| Before SmmReadyToLock | | |
| | | |
| | | |
+------------------------------+ | |
| Boot Time Boot Script | | |
| After SmmReadyToLock InSmm | | |
| | | |
+------------------------------+<-------|--|
| |
| |
mBootScriptDataGuid LockBox: (IN_PLACE) | |
Used to restore data at S3 resume. | |
+------------------------------+ | |
| Boot Time Boot Script | | |
| Before SmmReadyToLock | | |
| | | |
| | | |
+------------------------------+ | |
| Boot Time Boot Script | | |
| After SmmReadyToLock InSmm | | |
| | | |
+------------------------------+<-------|---
| Runtime Boot Script | |
| After SmmReadyToLock InSmm | |
+------------------------------+ |
| ...... | |
+------------------------------+<--------
mBootScriptTableBaseGuid LockBox: (IN_PLACE)
+------------------------------+
| mS3BootScriptTablePtr-> |
| TableBase |
+------------------------------+
mBootScriptSmmPrivateDataGuid LockBox: (IN_PLACE)
SMM private data with BackFromS3 = TRUE
at runtime. S3 will help restore it to
tell the Library the system is back from S3.
+------------------------------+
| SCRIPT_TABLE_PRIVATE_DATA |
| TableBase |
| TableLength |
| TableMemoryPageNumber |
| AtRuntime |
| InSmm |
| BootTimeScriptLength |
| SmmLocked |
| BackFromS3 = TRUE |
+------------------------------+
**/
SCRIPT_TABLE_PRIVATE_DATA *mS3BootScriptTablePtr;
//
// Allocate SMM copy because we can not use mS3BootScriptTablePtr after SmmReadyToLock in InSmm.
//
SCRIPT_TABLE_PRIVATE_DATA *mS3BootScriptTableSmmPtr;
EFI_GUID mBootScriptDataGuid = {
0xaea6b965, 0xdcf5, 0x4311, { 0xb4, 0xb8, 0xf, 0x12, 0x46, 0x44, 0x94, 0xd2 }
};
EFI_GUID mBootScriptDataBootTimeGuid = {
0xb5af1d7a, 0xb8cf, 0x4eb3, { 0x89, 0x25, 0xa8, 0x20, 0xe1, 0x6b, 0x68, 0x7d }
};
EFI_GUID mBootScriptTableBaseGuid = {
0x1810ab4a, 0x2314, 0x4df6, { 0x81, 0xeb, 0x67, 0xc6, 0xec, 0x5, 0x85, 0x91 }
};
EFI_GUID mBootScriptSmmPrivateDataGuid = {
0x627ee2da, 0x3bf9, 0x439b, { 0x92, 0x9f, 0x2e, 0xe, 0x6e, 0x9d, 0xba, 0x62 }
};
EFI_EVENT mEventDxeSmmReadyToLock = NULL;
VOID *mRegistrationSmmExitBootServices = NULL;
VOID *mRegistrationSmmLegacyBoot = NULL;
VOID *mRegistrationSmmReadyToLock = NULL;
BOOLEAN mS3BootScriptTableAllocated = FALSE;
BOOLEAN mS3BootScriptTableSmmAllocated = FALSE;
EFI_SMM_SYSTEM_TABLE2 *mBootScriptSmst = NULL;
/**
This is an internal function to add a terminate node the entry, recalculate the table
length and fill into the table.
@return the base address of the boot script table.
**/
UINT8*
S3BootScriptInternalCloseTable (
VOID
)
{
UINT8 *S3TableBase;
EFI_BOOT_SCRIPT_TERMINATE ScriptTerminate;
EFI_BOOT_SCRIPT_TABLE_HEADER *ScriptTableInfo;
S3TableBase = mS3BootScriptTablePtr->TableBase;
if (S3TableBase == NULL) {
//
// the table is not exist
//
return S3TableBase;
}
//
// Append the termination entry.
//
ScriptTerminate.OpCode = S3_BOOT_SCRIPT_LIB_TERMINATE_OPCODE;
ScriptTerminate.Length = (UINT8) sizeof (EFI_BOOT_SCRIPT_TERMINATE);
CopyMem (mS3BootScriptTablePtr->TableBase + mS3BootScriptTablePtr->TableLength, &ScriptTerminate, sizeof (EFI_BOOT_SCRIPT_TERMINATE));
//
// fill the table length
//
ScriptTableInfo = (EFI_BOOT_SCRIPT_TABLE_HEADER*)(mS3BootScriptTablePtr->TableBase);
ScriptTableInfo->TableLength = mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE);
return S3TableBase;
//
// NOTE: Here we did NOT adjust the mS3BootScriptTablePtr->TableLength to
// mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE).
// Because maybe after SmmReadyToLock, we still need add entries into the table,
// and the entry should be added start before this TERMINATE node.
//
}
/**
This function save boot script data to LockBox.
**/
VOID
SaveBootScriptDataToLockBox (
VOID
)
{
EFI_STATUS Status;
//
// Save whole memory copy into LockBox.
// It will be used to restore data at S3 resume.
//
Status = SaveLockBox (
&mBootScriptDataGuid,
(VOID *)mS3BootScriptTablePtr->TableBase,
EFI_PAGES_TO_SIZE (mS3BootScriptTablePtr->TableMemoryPageNumber)
);
ASSERT_EFI_ERROR (Status);
Status = SetLockBoxAttributes (&mBootScriptDataGuid, LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE);
ASSERT_EFI_ERROR (Status);
//
// Just need save TableBase.
// Do not update other field because they will NOT be used in S3.
//
Status = SaveLockBox (
&mBootScriptTableBaseGuid,
(VOID *)&mS3BootScriptTablePtr->TableBase,
sizeof(mS3BootScriptTablePtr->TableBase)
);
ASSERT_EFI_ERROR (Status);
Status = SetLockBoxAttributes (&mBootScriptTableBaseGuid, LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE);
ASSERT_EFI_ERROR (Status);
}
/**
This is the Event call back function to notify the Library the system is entering
SmmLocked phase.
@param Event Pointer to this event
@param Context Event handler private data
**/
VOID
EFIAPI
S3BootScriptEventCallBack (
IN EFI_EVENT Event,
IN VOID *Context
)
{
EFI_STATUS Status;
VOID *Interface;
//
// Try to locate it because EfiCreateProtocolNotifyEvent will trigger it once when registration.
// Just return if it is not found.
//
Status = gBS->LocateProtocol (
&gEfiDxeSmmReadyToLockProtocolGuid,
NULL,
&Interface
);
if (EFI_ERROR (Status)) {
return ;
}
//
// Here we should tell the library that we are entering SmmLocked phase.
// and the memory page number occupied by the table should not grow anymore.
//
if (!mS3BootScriptTablePtr->SmmLocked) {
//
// Before SmmReadyToLock, we need not write the terminate node when adding a node to boot scipt table
// or else, that will impact the performance. However, after SmmReadyToLock, we should append terminate
// node on every add to boot script table.
//
S3BootScriptInternalCloseTable ();
mS3BootScriptTablePtr->SmmLocked = TRUE;
//
// Save BootScript data to lockbox
//
SaveBootScriptDataToLockBox ();
}
}
/**
This is the Event call back function is triggered in SMM to notify the Library
the system is entering SmmLocked phase and set InSmm flag.
@param Protocol Points to the protocol's unique identifier
@param Interface Points to the interface instance
@param Handle The handle on which the interface was installed
@retval EFI_SUCCESS SmmEventCallback runs successfully
**/
EFI_STATUS
EFIAPI
S3BootScriptSmmEventCallBack (
IN CONST EFI_GUID *Protocol,
IN VOID *Interface,
IN EFI_HANDLE Handle
)
{
//
// Check if it is already done
//
if (mS3BootScriptTablePtr == mS3BootScriptTableSmmPtr) {
return EFI_SUCCESS;
}
//
// Last chance to call-out, just make sure SmmLocked is set.
//
S3BootScriptEventCallBack (NULL, NULL);
//
// Save a SMM copy. If TableBase is NOT null, it means SMM copy has been ready, skip copy mem.
//
if (mS3BootScriptTableSmmPtr->TableBase == NULL) {
CopyMem (mS3BootScriptTableSmmPtr, mS3BootScriptTablePtr, sizeof(*mS3BootScriptTablePtr));
//
// Set InSmm, we allow boot script update when InSmm, but not allow boot script outside SMM.
// InSmm will only be checked if SmmLocked is TRUE.
//
mS3BootScriptTableSmmPtr->InSmm = TRUE;
}
//
// We should not use ACPI Reserved copy, because it is not safe.
//
mS3BootScriptTablePtr = mS3BootScriptTableSmmPtr;
return EFI_SUCCESS;
}
/**
This function is to save boot time boot script data to LockBox.
Because there may be INSERT boot script at runtime in SMM.
The boot time copy will be used to restore data after back from S3.
Otherwise the data inserted may cause some boot time boot script data lost
if only BootScriptData used.
**/
VOID
SaveBootTimeDataToLockBox (
VOID
)
{
EFI_STATUS Status;
//
// ACPI Reserved copy is not safe, restore from BootScriptData LockBox first,
// and then save the data to BootScriptDataBootTime LockBox.
//
Status = RestoreLockBox (
&mBootScriptDataGuid,
NULL,
NULL
);
ASSERT_EFI_ERROR (Status);
//
// Save BootScriptDataBootTime
// It will be used to restore data after back from S3.
//
Status = SaveLockBox (
&mBootScriptDataBootTimeGuid,
(VOID *) mS3BootScriptTablePtr->TableBase,
mS3BootScriptTablePtr->BootTimeScriptLength
);
ASSERT_EFI_ERROR (Status);
}
/**
This function save boot script SMM private data to LockBox with BackFromS3 = TRUE at runtime.
S3 resume will help restore it to tell the Library the system is back from S3.
**/
VOID
SaveSmmPriviateDataToLockBoxAtRuntime (
VOID
)
{
EFI_STATUS Status;
//
// Save boot script SMM private data with BackFromS3 = TRUE.
//
mS3BootScriptTablePtr->BackFromS3 = TRUE;
Status = SaveLockBox (
&mBootScriptSmmPrivateDataGuid,
(VOID *) mS3BootScriptTablePtr,
sizeof (SCRIPT_TABLE_PRIVATE_DATA)
);
ASSERT_EFI_ERROR (Status);
Status = SetLockBoxAttributes (&mBootScriptSmmPrivateDataGuid, LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE);
ASSERT_EFI_ERROR (Status);
//
// Set BackFromS3 flag back to FALSE to indicate that now is not back from S3.
//
mS3BootScriptTablePtr->BackFromS3 = FALSE;
}
/**
This is the Event call back function is triggered in SMM to notify the Library
the system is entering runtime phase.
@param[in] Protocol Points to the protocol's unique identifier
@param[in] Interface Points to the interface instance
@param[in] Handle The handle on which the interface was installed
@retval EFI_SUCCESS SmmAtRuntimeCallBack runs successfully
**/
EFI_STATUS
EFIAPI
S3BootScriptSmmAtRuntimeCallBack (
IN CONST EFI_GUID *Protocol,
IN VOID *Interface,
IN EFI_HANDLE Handle
)
{
if (!mS3BootScriptTablePtr->AtRuntime) {
mS3BootScriptTablePtr->BootTimeScriptLength = (UINT32) (mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE));
SaveBootTimeDataToLockBox ();
mS3BootScriptTablePtr->AtRuntime = TRUE;
SaveSmmPriviateDataToLockBoxAtRuntime ();
}
return EFI_SUCCESS;
}
/**
Library Constructor.
this function just identify it is a smm driver or non-smm driver linked against
with the library
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval RETURN_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
S3BootScriptLibInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
SCRIPT_TABLE_PRIVATE_DATA *S3TablePtr;
SCRIPT_TABLE_PRIVATE_DATA *S3TableSmmPtr;
VOID *Registration;
EFI_SMM_BASE2_PROTOCOL *SmmBase2;
BOOLEAN InSmm;
EFI_PHYSICAL_ADDRESS Buffer;
S3TablePtr = (SCRIPT_TABLE_PRIVATE_DATA*)(UINTN)PcdGet64(PcdS3BootScriptTablePrivateDataPtr);
//
// The Boot script private data is not be initialized. create it
//
if (S3TablePtr == 0) {
Buffer = SIZE_4GB - 1;
Status = gBS->AllocatePages (
AllocateMaxAddress,
EfiReservedMemoryType,
EFI_SIZE_TO_PAGES(sizeof(SCRIPT_TABLE_PRIVATE_DATA)),
&Buffer
);
ASSERT_EFI_ERROR (Status);
mS3BootScriptTableAllocated = TRUE;
S3TablePtr = (VOID *) (UINTN) Buffer;
Status = PcdSet64S (PcdS3BootScriptTablePrivateDataPtr, (UINT64) (UINTN)S3TablePtr);
ASSERT_EFI_ERROR (Status);
ZeroMem (S3TablePtr, sizeof(SCRIPT_TABLE_PRIVATE_DATA));
//
// Create event to notify the library system enter the SmmLocked phase.
//
mEventDxeSmmReadyToLock = EfiCreateProtocolNotifyEvent (
&gEfiDxeSmmReadyToLockProtocolGuid,
TPL_CALLBACK,
S3BootScriptEventCallBack,
NULL,
&Registration
);
ASSERT (mEventDxeSmmReadyToLock != NULL);
}
mS3BootScriptTablePtr = S3TablePtr;
//
// Get InSmm, we need to register SmmReadyToLock if this library is linked to SMM driver.
//
Status = gBS->LocateProtocol (&gEfiSmmBase2ProtocolGuid, NULL, (VOID**) &SmmBase2);
if (EFI_ERROR (Status)) {
return RETURN_SUCCESS;
}
Status = SmmBase2->InSmm (SmmBase2, &InSmm);
if (EFI_ERROR (Status)) {
return RETURN_SUCCESS;
}
if (!InSmm) {
return RETURN_SUCCESS;
}
//
// Good, we are in SMM
//
Status = SmmBase2->GetSmstLocation (SmmBase2, &mBootScriptSmst);
if (EFI_ERROR (Status)) {
return RETURN_SUCCESS;
}
S3TableSmmPtr = (SCRIPT_TABLE_PRIVATE_DATA*)(UINTN)PcdGet64(PcdS3BootScriptTablePrivateSmmDataPtr);
//
// The Boot script private data in SMM is not be initialized. create it
//
if (S3TableSmmPtr == 0) {
Status = mBootScriptSmst->SmmAllocatePool (
EfiRuntimeServicesData,
sizeof(SCRIPT_TABLE_PRIVATE_DATA),
(VOID **) &S3TableSmmPtr
);
ASSERT_EFI_ERROR (Status);
mS3BootScriptTableSmmAllocated = TRUE;
Status = PcdSet64S (PcdS3BootScriptTablePrivateSmmDataPtr, (UINT64) (UINTN)S3TableSmmPtr);
ASSERT_EFI_ERROR (Status);
ZeroMem (S3TableSmmPtr, sizeof(SCRIPT_TABLE_PRIVATE_DATA));
//
// Register SmmExitBootServices and SmmLegacyBoot notification.
//
Status = mBootScriptSmst->SmmRegisterProtocolNotify (
&gEdkiiSmmExitBootServicesProtocolGuid,
S3BootScriptSmmAtRuntimeCallBack,
&mRegistrationSmmExitBootServices
);
ASSERT_EFI_ERROR (Status);
Status = mBootScriptSmst->SmmRegisterProtocolNotify (
&gEdkiiSmmLegacyBootProtocolGuid,
S3BootScriptSmmAtRuntimeCallBack,
&mRegistrationSmmLegacyBoot
);
ASSERT_EFI_ERROR (Status);
}
mS3BootScriptTableSmmPtr = S3TableSmmPtr;
//
// Register SmmReadyToLock notification.
//
Status = mBootScriptSmst->SmmRegisterProtocolNotify (
&gEfiSmmReadyToLockProtocolGuid,
S3BootScriptSmmEventCallBack,
&mRegistrationSmmReadyToLock
);
ASSERT_EFI_ERROR (Status);
return RETURN_SUCCESS;
}
/**
Library Destructor to free the resources allocated by
S3BootScriptLibInitialize() and unregister callbacks.
NOTICE: The destructor doesn't support unloading as a separate action, and it
only supports unloading if the containing driver's entry point function fails.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval RETURN_SUCCESS The destructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
S3BootScriptLibDeinitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
DEBUG ((EFI_D_INFO, "%a() in %a module\n", __FUNCTION__, gEfiCallerBaseName));
if (mEventDxeSmmReadyToLock != NULL) {
//
// Close the DxeSmmReadyToLock event.
//
Status = gBS->CloseEvent (mEventDxeSmmReadyToLock);
ASSERT_EFI_ERROR (Status);
}
if (mBootScriptSmst != NULL) {
if (mRegistrationSmmExitBootServices != NULL) {
//
// Unregister SmmExitBootServices notification.
//
Status = mBootScriptSmst->SmmRegisterProtocolNotify (
&gEdkiiSmmExitBootServicesProtocolGuid,
NULL,
&mRegistrationSmmExitBootServices
);
ASSERT_EFI_ERROR (Status);
}
if (mRegistrationSmmLegacyBoot != NULL) {
//
// Unregister SmmLegacyBoot notification.
//
Status = mBootScriptSmst->SmmRegisterProtocolNotify (
&gEdkiiSmmLegacyBootProtocolGuid,
NULL,
&mRegistrationSmmLegacyBoot
);
ASSERT_EFI_ERROR (Status);
}
if (mRegistrationSmmReadyToLock != NULL) {
//
// Unregister SmmReadyToLock notification.
//
Status = mBootScriptSmst->SmmRegisterProtocolNotify (
&gEfiSmmReadyToLockProtocolGuid,
NULL,
&mRegistrationSmmReadyToLock
);
ASSERT_EFI_ERROR (Status);
}
}
//
// Free the resources allocated and set PCDs to 0.
//
if (mS3BootScriptTableAllocated) {
Status = gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) mS3BootScriptTablePtr, EFI_SIZE_TO_PAGES(sizeof(SCRIPT_TABLE_PRIVATE_DATA)));
ASSERT_EFI_ERROR (Status);
Status = PcdSet64S (PcdS3BootScriptTablePrivateDataPtr, 0);
ASSERT_EFI_ERROR (Status);
}
if ((mBootScriptSmst != NULL) && mS3BootScriptTableSmmAllocated) {
Status = mBootScriptSmst->SmmFreePool (mS3BootScriptTableSmmPtr);
ASSERT_EFI_ERROR (Status);
Status = PcdSet64S (PcdS3BootScriptTablePrivateSmmDataPtr, 0);
ASSERT_EFI_ERROR (Status);
}
return RETURN_SUCCESS;
}
/**
To get the start address from which a new boot time s3 boot script entry will write into.
If the table is not exist, the functio will first allocate a buffer for the table
If the table buffer is not enough for the new entry, in non-smm mode, the funtion will
invoke reallocate to enlarge buffer.
@param EntryLength the new entry length.
@retval the address from which the a new s3 boot script entry will write into
**/
UINT8*
S3BootScriptGetBootTimeEntryAddAddress (
UINT8 EntryLength
)
{
EFI_PHYSICAL_ADDRESS S3TableBase;
EFI_PHYSICAL_ADDRESS NewS3TableBase;
UINT8 *NewEntryPtr;
UINT32 TableLength;
UINT16 PageNumber;
EFI_STATUS Status;
EFI_BOOT_SCRIPT_TABLE_HEADER *ScriptTableInfo;
S3TableBase = (EFI_PHYSICAL_ADDRESS)(UINTN)(mS3BootScriptTablePtr->TableBase);
if (S3TableBase == 0) {
//
// The table is not exist. This is the first to add entry.
// Allocate ACPI script table space under 4G memory.
//
S3TableBase = 0xffffffff;
Status = gBS->AllocatePages (
AllocateMaxAddress,
EfiReservedMemoryType,
2 + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber),
(EFI_PHYSICAL_ADDRESS*)&S3TableBase
);
if (EFI_ERROR(Status)) {
ASSERT_EFI_ERROR (Status);
return 0;
}
//
// Fill Table Header
//
ScriptTableInfo = (EFI_BOOT_SCRIPT_TABLE_HEADER*)(UINTN)S3TableBase;
ScriptTableInfo->OpCode = S3_BOOT_SCRIPT_LIB_TABLE_OPCODE;
ScriptTableInfo->Length = (UINT8) sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);
ScriptTableInfo->Version = BOOT_SCRIPT_TABLE_VERSION;
ScriptTableInfo->TableLength = 0; // will be calculate at CloseTable
mS3BootScriptTablePtr->TableLength = sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);
mS3BootScriptTablePtr->TableBase = (UINT8*)(UINTN)S3TableBase;
mS3BootScriptTablePtr->TableMemoryPageNumber = (UINT16)(2 + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber));
}
// Here we do not count the reserved memory for runtime script table.
PageNumber = (UINT16) (mS3BootScriptTablePtr->TableMemoryPageNumber - PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber));
TableLength = mS3BootScriptTablePtr->TableLength;
if (EFI_PAGES_TO_SIZE ((UINTN) PageNumber) < (TableLength + EntryLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE))) {
//
// The buffer is too small to hold the table, Reallocate the buffer
//
NewS3TableBase = 0xffffffff;
Status = gBS->AllocatePages (
AllocateMaxAddress,
EfiReservedMemoryType,
2 + PageNumber + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber),
(EFI_PHYSICAL_ADDRESS*)&NewS3TableBase
);
if (EFI_ERROR(Status)) {
ASSERT_EFI_ERROR (Status);
return 0;
}
CopyMem ((VOID*)(UINTN)NewS3TableBase, (VOID*)(UINTN)S3TableBase, TableLength);
gBS->FreePages (S3TableBase, mS3BootScriptTablePtr->TableMemoryPageNumber);
mS3BootScriptTablePtr->TableBase = (UINT8*)(UINTN)NewS3TableBase;
mS3BootScriptTablePtr->TableMemoryPageNumber = (UINT16) (2 + PageNumber + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber));
}
//
// calculate the the start address for the new entry.
//
NewEntryPtr = mS3BootScriptTablePtr->TableBase + TableLength;
//
// update the table lenghth
//
mS3BootScriptTablePtr->TableLength = TableLength + EntryLength;
//
// In the boot time, we will not append the termination entry to the boot script
// table until the callers think there is no boot time data that should be added and
// it is caller's responsibility to explicit call the CloseTable.
//
//
return NewEntryPtr;
}
/**
To get the start address from which a new runtime(after SmmReadyToLock) s3 boot script entry will write into.
In this case, it should be ensured that there is enough buffer to hold the entry.
@param EntryLength the new entry length.
@retval the address from which the a new s3 runtime(after SmmReadyToLock) script entry will write into
**/
UINT8*
S3BootScriptGetRuntimeEntryAddAddress (
UINT8 EntryLength
)
{
UINT8 *NewEntryPtr;
NewEntryPtr = NULL;
//
// Check if the memory range reserved for S3 Boot Script table is large enough to hold the node.
//
if ((mS3BootScriptTablePtr->TableLength + EntryLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE)) <= EFI_PAGES_TO_SIZE ((UINTN) (mS3BootScriptTablePtr->TableMemoryPageNumber))) {
NewEntryPtr = mS3BootScriptTablePtr->TableBase + mS3BootScriptTablePtr->TableLength;
mS3BootScriptTablePtr->TableLength = mS3BootScriptTablePtr->TableLength + EntryLength;
//
// Append a terminate node on every insert
//
S3BootScriptInternalCloseTable ();
}
return (UINT8*)NewEntryPtr;
}
/**
This function is to restore boot time boot script data from LockBox.
**/
VOID
RestoreBootTimeDataFromLockBox (
VOID
)
{
EFI_STATUS Status;
UINTN LockBoxLength;
//
// Restore boot time boot script data from LockBox.
//
LockBoxLength = mS3BootScriptTablePtr->BootTimeScriptLength;
Status = RestoreLockBox (
&mBootScriptDataBootTimeGuid,
(VOID *) mS3BootScriptTablePtr->TableBase,
&LockBoxLength
);
ASSERT_EFI_ERROR (Status);
//
// Update the data to BootScriptData LockBox.
//
Status = UpdateLockBox (
&mBootScriptDataGuid,
0,
(VOID *) mS3BootScriptTablePtr->TableBase,
LockBoxLength
);
ASSERT_EFI_ERROR (Status);
//
// Update TableLength.
//
mS3BootScriptTablePtr->TableLength = (UINT32) (mS3BootScriptTablePtr->BootTimeScriptLength - sizeof (EFI_BOOT_SCRIPT_TERMINATE));
}
/**
To get the start address from which a new s3 boot script entry will write into.
@param EntryLength the new entry length.
@retval the address from which the a new s3 boot script entry will write into
**/
UINT8*
S3BootScriptGetEntryAddAddress (
UINT8 EntryLength
)
{
UINT8* NewEntryPtr;
if (mS3BootScriptTablePtr->SmmLocked) {
//
// We need check InSmm, because after SmmReadyToLock, only SMM driver is allowed to write boot script.
//
if (!mS3BootScriptTablePtr->InSmm) {
//
// Add DEBUG ERROR, so that we can find it after SmmReadyToLock.
// Do not use ASSERT, because we may have test to invoke this interface.
//
DEBUG ((EFI_D_ERROR, "FATAL ERROR: Set boot script outside SMM after SmmReadyToLock!!!\n"));
return NULL;
}
if (mS3BootScriptTablePtr->BackFromS3) {
//
// Back from S3, restore boot time boot script data from LockBox
// and set BackFromS3 flag back to FALSE.
//
RestoreBootTimeDataFromLockBox ();
mS3BootScriptTablePtr->BackFromS3 = FALSE;
}
NewEntryPtr = S3BootScriptGetRuntimeEntryAddAddress (EntryLength);
} else {
NewEntryPtr = S3BootScriptGetBootTimeEntryAddAddress (EntryLength);
}
return NewEntryPtr;
}
/**
Sync BootScript LockBox data.
@param Script The address from where the boot script has been added or updated.
**/
VOID
SyncBootScript (
IN UINT8 *Script
)
{
EFI_STATUS Status;
UINT32 ScriptOffset;
UINT32 TotalScriptLength;
if (!mS3BootScriptTablePtr->SmmLocked || !mS3BootScriptTablePtr->InSmm) {
//
// If it is not after SmmReadyToLock in SMM,
// just return.
//
return ;
}
ScriptOffset = (UINT32) (Script - mS3BootScriptTablePtr->TableBase);
TotalScriptLength = (UINT32) (mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE));
//
// Update BootScriptData
// So in S3 resume, the data can be restored correctly.
//
Status = UpdateLockBox (
&mBootScriptDataGuid,
ScriptOffset,
(VOID *)((UINTN)mS3BootScriptTablePtr->TableBase + ScriptOffset),
TotalScriptLength - ScriptOffset
);
ASSERT_EFI_ERROR (Status);
//
// Now the length field is updated, need sync to lockbox.
// So at S3 resume, the data can be restored correctly.
//
Status = UpdateLockBox (
&mBootScriptDataGuid,
OFFSET_OF (EFI_BOOT_SCRIPT_TABLE_HEADER, TableLength),
&TotalScriptLength,
sizeof (TotalScriptLength)
);
ASSERT_EFI_ERROR (Status);
}
/**
This is an function to close the S3 boot script table. The function could only be called in
BOOT time phase. To comply with the Framework spec definition on
EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable(), this function will fulfill following things:
1. Closes the specified boot script table
2. It allocates a new memory pool to duplicate all the boot scripts in the specified table.
Once this function is called, the table maintained by the library will be destroyed
after it is copied into the allocated pool.
3. Any attempts to add a script record after calling this function will cause a new table
to be created by the library.
4. The base address of the allocated pool will be returned in Address. Note that after
using the boot script table, the CALLER is responsible for freeing the pool that is allocated
by this function.
In Spec PI1.1, this EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable() is retired. To provides this API for now is
for Framework Spec compatibility.
If anyone does call CloseTable() on a real platform, then the caller is responsible for figuring out
how to get the script to run at S3 resume because the boot script maintained by the lib will be
destroyed.
@return the base address of the new copy of the boot script table.
@note this function could only called in boot time phase
**/
UINT8*
EFIAPI
S3BootScriptCloseTable (
VOID
)
{
UINT8 *S3TableBase;
UINT32 TableLength;
UINT8 *Buffer;
EFI_STATUS Status;
EFI_BOOT_SCRIPT_TABLE_HEADER *ScriptTableInfo;
S3TableBase = mS3BootScriptTablePtr->TableBase;
if (S3TableBase == 0) {
return 0;
}
//
// Append the termination record the S3 boot script table
//
S3BootScriptInternalCloseTable();
TableLength = mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE);
//
// Allocate the buffer and copy the boot script to the buffer.
//
Status = gBS->AllocatePool (
EfiBootServicesData,
(UINTN)TableLength,
(VOID **) &Buffer
);
if (EFI_ERROR (Status)) {
return 0;
}
CopyMem (Buffer, S3TableBase, TableLength);
//
// Destroy the table maintained by the library so that the next write operation
// will write the record to the first entry of the table.
//
// Fill the table header.
ScriptTableInfo = (EFI_BOOT_SCRIPT_TABLE_HEADER*)S3TableBase;
ScriptTableInfo->OpCode = S3_BOOT_SCRIPT_LIB_TABLE_OPCODE;
ScriptTableInfo->Length = (UINT8) sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);
ScriptTableInfo->TableLength = 0; // will be calculate at close the table
mS3BootScriptTablePtr->TableLength = sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);
return Buffer;
}
/**
Save I/O write to boot script
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the I/O operations.
@param Count The number of I/O operations to perform.
@param Buffer The source buffer from which to write data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_IO_WRITE ScriptIoWrite;
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_WRITE) + (WidthInByte * Count));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// save script data
//
ScriptIoWrite.OpCode = EFI_BOOT_SCRIPT_IO_WRITE_OPCODE;
ScriptIoWrite.Length = Length;
ScriptIoWrite.Width = Width;
ScriptIoWrite.Address = Address;
ScriptIoWrite.Count = (UINT32) Count;
CopyMem ((VOID*)Script, (VOID*)&ScriptIoWrite, sizeof(EFI_BOOT_SCRIPT_IO_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_IO_WRITE)), Buffer, WidthInByte * Count);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for an I/O modify operation into a S3 boot script table
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the I/O operations.
@param Data A pointer to the data to be OR-ed.
@param DataMask A pointer to the data mask to be AND-ed with the data read from the register
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_IO_READ_WRITE ScriptIoReadWrite;
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptIoReadWrite.OpCode = EFI_BOOT_SCRIPT_IO_READ_WRITE_OPCODE;
ScriptIoReadWrite.Length = Length;
ScriptIoReadWrite.Width = Width;
ScriptIoReadWrite.Address = Address;
CopyMem ((VOID*)Script, (VOID*)&ScriptIoReadWrite, sizeof(EFI_BOOT_SCRIPT_IO_READ_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE)), Data, WidthInByte);
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE) + WidthInByte), DataMask, WidthInByte);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for a memory write operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the memory operations
@param Count The number of memory operations to perform.
@param Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_MEM_WRITE ScriptMemWrite;
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_WRITE) + (WidthInByte * Count));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptMemWrite.OpCode = EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE;
ScriptMemWrite.Length = Length;
ScriptMemWrite.Width = Width;
ScriptMemWrite.Address = Address;
ScriptMemWrite.Count = (UINT32) Count;
CopyMem ((VOID*)Script, (VOID*)&ScriptMemWrite, sizeof(EFI_BOOT_SCRIPT_MEM_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_MEM_WRITE)), Buffer, WidthInByte * Count);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for a memory modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the memory operations. Address needs alignment if required
@param Data A pointer to the data to be OR-ed.
@param DataMask A pointer to the data mask to be AND-ed with the data read from the register.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_MEM_READ_WRITE ScriptMemReadWrite;
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptMemReadWrite.OpCode = EFI_BOOT_SCRIPT_MEM_READ_WRITE_OPCODE;
ScriptMemReadWrite.Length = Length;
ScriptMemReadWrite.Width = Width;
ScriptMemReadWrite.Address = Address;
CopyMem ((VOID*)Script, (VOID*)&ScriptMemReadWrite , sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE)), Data, WidthInByte);
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE) + WidthInByte), DataMask, WidthInByte);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration space write operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The address within the PCI configuration space.
@param Count The number of PCI operations to perform.
@param Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfgWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE ScriptPciWrite;
if (Width == S3BootScriptWidthUint64 ||
Width == S3BootScriptWidthFifoUint64 ||
Width == S3BootScriptWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE) + (WidthInByte * Count));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptPciWrite.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE_OPCODE;
ScriptPciWrite.Length = Length;
ScriptPciWrite.Width = Width;
ScriptPciWrite.Address = Address;
ScriptPciWrite.Count = (UINT32) Count;
CopyMem ((VOID*)Script, (VOID*)&ScriptPciWrite, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE)), Buffer, WidthInByte * Count);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The address within the PCI configuration space.
@param Data A pointer to the data to be OR-ed.The size depends on Width.
@param DataMask A pointer to the data mask to be AND-ed.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN__SUCCESS Opcode is added.
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfgReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE ScriptPciReadWrite;
if (Width == S3BootScriptWidthUint64 ||
Width == S3BootScriptWidthFifoUint64 ||
Width == S3BootScriptWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptPciReadWrite.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE_OPCODE;
ScriptPciReadWrite.Length = Length;
ScriptPciReadWrite.Width = Width;
ScriptPciReadWrite.Address = Address;
CopyMem ((VOID*)Script, (VOID*)&ScriptPciReadWrite, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE)), Data, WidthInByte);
CopyMem (
(VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE) + WidthInByte),
DataMask,
WidthInByte
);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration 2 space write operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Count The number of PCI operations to perform.
@param Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfg2Write (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE ScriptPciWrite2;
if (Width == S3BootScriptWidthUint64 ||
Width == S3BootScriptWidthFifoUint64 ||
Width == S3BootScriptWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE) + (WidthInByte * Count));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptPciWrite2.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE;
ScriptPciWrite2.Length = Length;
ScriptPciWrite2.Width = Width;
ScriptPciWrite2.Address = Address;
ScriptPciWrite2.Segment = Segment;
ScriptPciWrite2.Count = (UINT32)Count;
CopyMem ((VOID*)Script, (VOID*)&ScriptPciWrite2, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE)), Buffer, WidthInByte * Count);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration 2 space modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Data A pointer to the data to be OR-ed. The size depends on Width.
@param DataMask A pointer to the data mask to be AND-ed.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfg2ReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE ScriptPciReadWrite2;
if (Width == S3BootScriptWidthUint64 ||
Width == S3BootScriptWidthFifoUint64 ||
Width == S3BootScriptWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptPciReadWrite2.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE;
ScriptPciReadWrite2.Length = Length;
ScriptPciReadWrite2.Width = Width;
ScriptPciReadWrite2.Segment = Segment;
ScriptPciReadWrite2.Address = Address;
CopyMem ((VOID*)Script, (VOID*)&ScriptPciReadWrite2, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE)), Data, WidthInByte);
CopyMem (
(VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE) + WidthInByte),
DataMask,
WidthInByte
);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Checks the parameter of S3BootScriptSaveSmbusExecute().
This function checks the input parameters of SmbusExecute(). If the input parameters are valid
for certain SMBus bus protocol, it will return EFI_SUCCESS; otherwise, it will return certain
error code based on the input SMBus bus protocol.
@param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length,
and PEC.
@param Operation Signifies which particular SMBus hardware protocol instance that
it will use to execute the SMBus transactions. This SMBus
hardware protocol is defined by the SMBus Specification and is
not related to EFI.
@param Length Signifies the number of bytes that this operation will do. The
maximum number of bytes can be revision specific and operation
specific. This field will contain the actual number of bytes that
are executed for this operation. Not all operations require this
argument.
@param Buffer Contains the value of data to execute to the SMBus slave device.
Not all operations require this argument. The length of this
buffer is identified by Length.
@retval EFI_SUCCESS All the parameters are valid for the corresponding SMBus bus
protocol.
@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
@retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for EfiSmbusQuickRead
and EfiSmbusQuickWrite. Length is outside the range of valid
values.
@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.
@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.
**/
EFI_STATUS
CheckParameters (
IN UINTN SmBusAddress,
IN EFI_SMBUS_OPERATION Operation,
IN OUT UINTN *Length,
IN VOID *Buffer
)
{
EFI_STATUS Status;
UINTN RequiredLen;
EFI_SMBUS_DEVICE_COMMAND Command;
BOOLEAN PecCheck;
Command = SMBUS_LIB_COMMAND (SmBusAddress);
PecCheck = SMBUS_LIB_PEC (SmBusAddress);
//
// Set default value to be 2:
// for SmbusReadWord, SmbusWriteWord and SmbusProcessCall.
//
RequiredLen = 2;
Status = EFI_SUCCESS;
switch (Operation) {
case EfiSmbusQuickRead:
case EfiSmbusQuickWrite:
if (PecCheck || Command != 0) {
return EFI_UNSUPPORTED;
}
break;
case EfiSmbusReceiveByte:
case EfiSmbusSendByte:
if (Command != 0) {
return EFI_UNSUPPORTED;
}
//
// Cascade to check length parameter.
//
case EfiSmbusReadByte:
case EfiSmbusWriteByte:
RequiredLen = 1;
//
// Cascade to check length parameter.
//
case EfiSmbusReadWord:
case EfiSmbusWriteWord:
case EfiSmbusProcessCall:
if (Buffer == NULL || Length == NULL) {
return EFI_INVALID_PARAMETER;
} else if (*Length < RequiredLen) {
Status = EFI_BUFFER_TOO_SMALL;
}
*Length = RequiredLen;
break;
case EfiSmbusReadBlock:
case EfiSmbusWriteBlock:
case EfiSmbusBWBRProcessCall:
if ((Buffer == NULL) ||
(Length == NULL) ||
(*Length < MIN_SMBUS_BLOCK_LEN) ||
(*Length > MAX_SMBUS_BLOCK_LEN)) {
return EFI_INVALID_PARAMETER;
}
break;
default:
return EFI_INVALID_PARAMETER;
}
return Status;
}
/**
Adds a record for an SMBus command execution into a specified boot script table.
@param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
@param Operation Indicates which particular SMBus protocol it will use to execute the SMBus
transactions.
@param Length A pointer to signify the number of bytes that this operation will do.
@param Buffer Contains the value of data to execute to the SMBUS slave device.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveSmbusExecute (
IN UINTN SmBusAddress,
IN EFI_SMBUS_OPERATION Operation,
IN UINTN *Length,
IN VOID *Buffer
)
{
EFI_STATUS Status;
UINTN BufferLength;
UINT8 DataSize;
UINT8 *Script;
EFI_BOOT_SCRIPT_SMBUS_EXECUTE ScriptSmbusExecute;
if (Length == NULL) {
BufferLength = 0;
} else {
BufferLength = *Length;
}
Status = CheckParameters (SmBusAddress, Operation, &BufferLength, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}
DataSize = (UINT8)(sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE) + BufferLength);
Script = S3BootScriptGetEntryAddAddress (DataSize);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptSmbusExecute.OpCode = EFI_BOOT_SCRIPT_SMBUS_EXECUTE_OPCODE;
ScriptSmbusExecute.Length = DataSize;
ScriptSmbusExecute.SmBusAddress = (UINT64) SmBusAddress;
ScriptSmbusExecute.Operation = Operation;
ScriptSmbusExecute.DataSize = (UINT32) BufferLength;
CopyMem ((VOID*)Script, (VOID*)&ScriptSmbusExecute, sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE));
CopyMem (
(VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE)),
Buffer,
BufferLength
);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for an execution stall on the processor into a specified boot script table.
@param Duration Duration in microseconds of the stall
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveStall (
IN UINTN Duration
)
{
UINT8 Length;
UINT8 *Script;
EFI_BOOT_SCRIPT_STALL ScriptStall;
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_STALL));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptStall.OpCode = EFI_BOOT_SCRIPT_STALL_OPCODE;
ScriptStall.Length = Length;
ScriptStall.Duration = Duration;
CopyMem ((VOID*)Script, (VOID*)&ScriptStall, sizeof (EFI_BOOT_SCRIPT_STALL));
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for dispatching specified arbitrary code into a specified boot script table.
@param EntryPoint Entry point of the code to be dispatched.
@param Context Argument to be passed into the EntryPoint of the code to be dispatched.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveDispatch2 (
IN VOID *EntryPoint,
IN VOID *Context
)
{
UINT8 Length;
UINT8 *Script;
EFI_BOOT_SCRIPT_DISPATCH_2 ScriptDispatch2;
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH_2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptDispatch2.OpCode = EFI_BOOT_SCRIPT_DISPATCH_2_OPCODE;
ScriptDispatch2.Length = Length;
ScriptDispatch2.EntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)EntryPoint;
ScriptDispatch2.Context = (EFI_PHYSICAL_ADDRESS)(UINTN)Context;
CopyMem ((VOID*)Script, (VOID*)&ScriptDispatch2, sizeof (EFI_BOOT_SCRIPT_DISPATCH_2));
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for memory reads of the memory location and continues when the exit criteria is
satisfied or after a defined duration.
Please aware, below interface is different with PI specification, Vol 5:
EFI_S3_SAVE_STATE_PROTOCOL.Write() for EFI_BOOT_SCRIPT_MEM_POLL_OPCODE.
"Duration" below is microseconds, while "Delay" in PI specification means
the number of 100ns units to poll.
@param Width The width of the memory operations.
@param Address The base address of the memory operations.
@param BitMask A pointer to the bit mask to be AND-ed with the data read from the register.
@param BitValue A pointer to the data value after to be Masked.
@param Duration Duration in microseconds of the stall.
@param LoopTimes The times of the register polling.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *BitMask,
IN VOID *BitValue,
IN UINTN Duration,
IN UINT64 LoopTimes
)
{
UINT8 Length;
UINT8 *Script;
UINT8 WidthInByte;
EFI_BOOT_SCRIPT_MEM_POLL ScriptMemPoll;
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_POLL) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptMemPoll.OpCode = EFI_BOOT_SCRIPT_MEM_POLL_OPCODE;
ScriptMemPoll.Length = Length;
ScriptMemPoll.Width = Width;
ScriptMemPoll.Address = Address;
ScriptMemPoll.Duration = Duration;
ScriptMemPoll.LoopTimes = LoopTimes;
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_MEM_POLL)), BitValue, WidthInByte);
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_MEM_POLL) + WidthInByte), BitMask, WidthInByte);
CopyMem ((VOID*)Script, (VOID*)&ScriptMemPoll, sizeof (EFI_BOOT_SCRIPT_MEM_POLL));
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Store arbitrary information in the boot script table. This opcode is a no-op on dispatch and is only
used for debugging script issues.
@param InformationLength Length of the data in bytes
@param Information Information to be logged in the boot scrpit
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveInformation (
IN UINT32 InformationLength,
IN VOID *Information
)
{
UINT8 Length;
UINT8 *Script;
EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_INFORMATION) + InformationLength);
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptInformation.OpCode = EFI_BOOT_SCRIPT_INFORMATION_OPCODE;
ScriptInformation.Length = Length;
ScriptInformation.InformationLength = InformationLength;
CopyMem ((VOID*)Script, (VOID*)&ScriptInformation, sizeof (EFI_BOOT_SCRIPT_INFORMATION));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_INFORMATION)), (VOID *) Information, (UINTN) InformationLength);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Store a string in the boot script table. This opcode is a no-op on dispatch and is only
used for debugging script issues.
@param String The string to save to boot script table
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveInformationAsciiString (
IN CONST CHAR8 *String
)
{
return S3BootScriptSaveInformation (
(UINT32) AsciiStrLen (String) + 1,
(VOID*) String
);
}
/**
Adds a record for dispatching specified arbitrary code into a specified boot script table.
@param EntryPoint Entry point of the code to be dispatched.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveDispatch (
IN VOID *EntryPoint
)
{
UINT8 Length;
UINT8 *Script;
EFI_BOOT_SCRIPT_DISPATCH ScriptDispatch;
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptDispatch.OpCode = EFI_BOOT_SCRIPT_DISPATCH_OPCODE;
ScriptDispatch.Length = Length;
ScriptDispatch.EntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)EntryPoint;
CopyMem ((VOID*)Script, (VOID*)&ScriptDispatch, sizeof (EFI_BOOT_SCRIPT_DISPATCH));
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for I/O reads the I/O location and continues when the exit criteria is satisfied or after a
defined duration.
@param Width The width of the I/O operations.
@param Address The base address of the I/O operations.
@param Data The comparison value used for the polling exit criteria.
@param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero
in Data are ignored when polling the memory address.
@param Delay The number of 100ns units to poll. Note that timer available may be of poorer
granularity so the delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
)
{
UINT8 WidthInByte;
UINT8 *Script;
UINT8 Length;
EFI_BOOT_SCRIPT_IO_POLL ScriptIoPoll;
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_POLL) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptIoPoll.OpCode = EFI_BOOT_SCRIPT_IO_POLL_OPCODE;
ScriptIoPoll.Length = (UINT8) (sizeof (EFI_BOOT_SCRIPT_IO_POLL) + (WidthInByte * 2));
ScriptIoPoll.Width = Width;
ScriptIoPoll.Address = Address;
ScriptIoPoll.Delay = Delay;
CopyMem ((VOID*)Script, (VOID*)&ScriptIoPoll, sizeof (EFI_BOOT_SCRIPT_IO_POLL));
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_IO_POLL)), Data, WidthInByte);
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_IO_POLL) + WidthInByte), DataMask, WidthInByte);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for PCI configuration space reads and continues when the exit criteria is satisfied or
after a defined duration.
@param Width The width of the I/O operations.
@param Address The address within the PCI configuration space.
@param Data The comparison value used for the polling exit criteria.
@param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero
in Data are ignored when polling the memory address
@param Delay The number of 100ns units to poll. Note that timer available may be of poorer
granularity so the delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
)
{
UINT8 *Script;
UINT8 WidthInByte;
UINT8 Length;
EFI_BOOT_SCRIPT_PCI_CONFIG_POLL ScriptPciPoll;
if (Width == S3BootScriptWidthUint64 ||
Width == S3BootScriptWidthFifoUint64 ||
Width == S3BootScriptWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptPciPoll.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG_POLL_OPCODE;
ScriptPciPoll.Length = (UINT8) (sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL) + (WidthInByte * 2));
ScriptPciPoll.Width = Width;
ScriptPciPoll.Address = Address;
ScriptPciPoll.Delay = Delay;
CopyMem ((VOID*)Script, (VOID*)&ScriptPciPoll, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL));
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL)), Data, WidthInByte);
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL) + WidthInByte), DataMask, WidthInByte);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Adds a record for PCI configuration space reads and continues when the exit criteria is satisfied or
after a defined duration.
@param Width The width of the I/O operations.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Data The comparison value used for the polling exit criteria.
@param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero
in Data are ignored when polling the memory address
@param Delay The number of 100ns units to poll. Note that timer available may be of poorer
granularity so the delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePci2Poll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
)
{
UINT8 WidthInByte;
UINT8 *Script;
UINT8 Length;
EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL ScriptPci2Poll;
if (Width == S3BootScriptWidthUint64 ||
Width == S3BootScriptWidthFifoUint64 ||
Width == S3BootScriptWidthFillUint64) {
return EFI_INVALID_PARAMETER;
}
WidthInByte = (UINT8) (0x01 << (Width & 0x03));
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL) + (WidthInByte * 2));
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptPci2Poll.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE;
ScriptPci2Poll.Length = (UINT8) (sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL) + (WidthInByte * 2));
ScriptPci2Poll.Width = Width;
ScriptPci2Poll.Segment = Segment;
ScriptPci2Poll.Address = Address;
ScriptPci2Poll.Delay = Delay;
CopyMem ((VOID*)Script, (VOID*)&ScriptPci2Poll, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL));
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL)), Data, WidthInByte);
CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL) + WidthInByte), DataMask, WidthInByte);
SyncBootScript (Script);
return RETURN_SUCCESS;
}
/**
Do the calculation of start address from which a new s3 boot script entry will write into.
@param EntryLength The new entry length.
@param Position specifies the position in the boot script table where the opcode will be
inserted, either before or after, depending on BeforeOrAfter.
@param BeforeOrAfter The flag to indicate to insert the nod before or after the position.
This parameter is effective when InsertFlag is TRUE
@param Script return out the position from which the a new s3 boot script entry will write into
**/
VOID
S3BootScriptCalculateInsertAddress (
IN UINT8 EntryLength,
IN VOID *Position OPTIONAL,
IN BOOLEAN BeforeOrAfter OPTIONAL,
OUT UINT8 **Script
)
{
UINTN TableLength;
UINT8 *S3TableBase;
UINTN PositionOffset;
EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;
//
// The entry inserting to table is already added to the end of the table
//
TableLength = mS3BootScriptTablePtr->TableLength - EntryLength;
S3TableBase = mS3BootScriptTablePtr->TableBase ;
//
// calculate the Position offset
//
if (Position != NULL) {
PositionOffset = (UINTN)Position - (UINTN)S3TableBase;
//
// If the BeforeOrAfter is FALSE, that means to insert the node right after the node.
//
if (!BeforeOrAfter) {
CopyMem ((VOID*)&ScriptHeader, Position, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));
PositionOffset += (ScriptHeader.Length);
}
//
// Insert the node before the adjusted Position
//
CopyMem (S3TableBase+PositionOffset+EntryLength, S3TableBase+PositionOffset, TableLength - PositionOffset);
//
// calculate the the start address for the new entry.
//
*Script = S3TableBase + PositionOffset;
} else {
if (!BeforeOrAfter) {
//
// Insert the node to the end of the table
//
*Script = S3TableBase + TableLength;
} else {
//
// Insert the node to the beginning of the table
//
PositionOffset = (UINTN) sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER);
CopyMem (S3TableBase+PositionOffset+EntryLength, S3TableBase+PositionOffset, TableLength - PositionOffset);
*Script = S3TableBase + PositionOffset;
}
}
}
/**
Move the last boot script entry to the position
@param BeforeOrAfter Specifies whether the opcode is stored before (TRUE) or after (FALSE) the position
in the boot script table specified by Position. If Position is NULL or points to
NULL then the new opcode is inserted at the beginning of the table (if TRUE) or end
of the table (if FALSE).
@param Position On entry, specifies the position in the boot script table where the opcode will be
inserted, either before or after, depending on BeforeOrAfter. On exit, specifies
the position of the inserted opcode in the boot script table.
@retval RETURN_OUT_OF_RESOURCES The table is not available.
@retval RETURN_INVALID_PARAMETER The Position is not a valid position in the boot script table.
@retval RETURN_SUCCESS Opcode is inserted.
**/
RETURN_STATUS
EFIAPI
S3BootScriptMoveLastOpcode (
IN BOOLEAN BeforeOrAfter,
IN OUT VOID **Position OPTIONAL
)
{
UINT8* Script;
VOID *TempPosition;
UINTN StartAddress;
UINT32 TableLength;
EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;
BOOLEAN ValidatePosition;
UINT8* LastOpcode;
UINT8 TempBootScriptEntry[BOOT_SCRIPT_NODE_MAX_LENGTH];
ValidatePosition = FALSE;
TempPosition = (Position == NULL) ? NULL:(*Position);
//
// Check that the script is initialized and synced without adding an entry to the script.
//
Script = S3BootScriptGetEntryAddAddress (0);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
Script = mS3BootScriptTablePtr->TableBase;
StartAddress = (UINTN) Script;
TableLength = mS3BootScriptTablePtr->TableLength;
Script = Script + sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER);
LastOpcode = Script;
//
// Find the last boot Script Entry which is not the terminate node
//
while ((UINTN) Script < (UINTN) (StartAddress + TableLength)) {
CopyMem ((VOID*)&ScriptHeader, Script, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));
if (TempPosition != NULL && TempPosition == Script) {
//
// If the position is specified, the position must be pointed to a boot script entry start address.
//
ValidatePosition = TRUE;
}
if (ScriptHeader.OpCode != S3_BOOT_SCRIPT_LIB_TERMINATE_OPCODE) {
LastOpcode = Script;
}
Script = Script + ScriptHeader.Length;
}
//
// If the position is specified, but not the start of a boot script entry, it is a invalid input
//
if (TempPosition != NULL && !ValidatePosition) {
return RETURN_INVALID_PARAMETER;
}
CopyMem ((VOID*)&ScriptHeader, LastOpcode, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));
CopyMem((VOID*)TempBootScriptEntry, LastOpcode, ScriptHeader.Length);
//
// Find the right position to write the node in
//
S3BootScriptCalculateInsertAddress (
ScriptHeader.Length,
TempPosition,
BeforeOrAfter,
&Script
);
//
// Copy the node to Boot script table
//
CopyMem((VOID*)Script, (VOID*)TempBootScriptEntry, ScriptHeader.Length);
SyncBootScript (Script);
//
// return out the Position
//
if (Position != NULL) {
*Position = Script;
}
return RETURN_SUCCESS;
}
/**
Create a Label node in the boot script table.
@param BeforeOrAfter Specifies whether the opcode is stored before (TRUE) or after (FALSE) the position
in the boot script table specified by Position. If Position is NULL or points to
NULL then the new opcode is inserted at the beginning of the table (if TRUE) or end
of the table (if FALSE).
@param Position On entry, specifies the position in the boot script table where the opcode will be
inserted, either before or after, depending on BeforeOrAfter. On exit, specifies
the position of the inserted opcode in the boot script table.
@param InformationLength Length of the label in bytes
@param Information Label to be logged in the boot scrpit
@retval RETURN_INVALID_PARAMETER The Position is not a valid position in the boot script table.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptLabelInternal (
IN BOOLEAN BeforeOrAfter,
IN OUT VOID **Position OPTIONAL,
IN UINT32 InformationLength,
IN CONST CHAR8 *Information
)
{
UINT8 Length;
UINT8 *Script;
EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;
Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_INFORMATION) + InformationLength);
Script = S3BootScriptGetEntryAddAddress (Length);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Build script data
//
ScriptInformation.OpCode = S3_BOOT_SCRIPT_LIB_LABEL_OPCODE;
ScriptInformation.Length = Length;
ScriptInformation.InformationLength = InformationLength;
CopyMem ((VOID*)Script, (VOID*)&ScriptInformation, sizeof (EFI_BOOT_SCRIPT_INFORMATION));
CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_INFORMATION)), (VOID *) Information, (UINTN) InformationLength);
SyncBootScript (Script);
return S3BootScriptMoveLastOpcode (BeforeOrAfter, Position);
}
/**
Find a label within the boot script table and, if not present, optionally create it.
@param BeforeOrAfter Specifies whether the opcode is stored before (TRUE)
or after (FALSE) the position in the boot script table
specified by Position.
@param CreateIfNotFound Specifies whether the label will be created if the label
does not exists (TRUE) or not (FALSE).
@param Position On entry, specifies the position in the boot script table
where the opcode will be inserted, either before or after,
depending on BeforeOrAfter. On exit, specifies the position
of the inserted opcode in the boot script table.
@param Label Points to the label which will be inserted in the boot script table.
@retval EFI_SUCCESS The operation succeeded. A record was added into the
specified script table.
@retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script is not supported.
If the opcode is unknow or not supported because of the PCD
Feature Flags.
@retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.
**/
RETURN_STATUS
EFIAPI
S3BootScriptLabel (
IN BOOLEAN BeforeOrAfter,
IN BOOLEAN CreateIfNotFound,
IN OUT VOID **Position OPTIONAL,
IN CONST CHAR8 *Label
)
{
UINT8* Script;
UINTN StartAddress;
UINT32 TableLength;
EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;
EFI_BOOT_SCRIPT_TABLE_HEADER TableHeader;
UINT32 LabelLength;
//
// Check NULL Label
//
if (Label == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check empty Label
//
if (Label[0] == '\0') {
return EFI_INVALID_PARAMETER;
}
//
// Check that the script is initialized and synced without adding an entry to the script.
// The code must search for the label first before it knows if a new entry needs
// to be added.
//
Script = S3BootScriptGetEntryAddAddress (0);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Check the header and search for existing label.
//
Script = mS3BootScriptTablePtr->TableBase;
CopyMem ((VOID*)&TableHeader, Script, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
if (TableHeader.OpCode != S3_BOOT_SCRIPT_LIB_TABLE_OPCODE) {
return EFI_INVALID_PARAMETER;
}
StartAddress = (UINTN) Script;
TableLength = mS3BootScriptTablePtr->TableLength;
Script = Script + TableHeader.Length;
while ((UINTN) Script < (UINTN) (StartAddress + TableLength)) {
CopyMem ((VOID*)&ScriptHeader, Script, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));
if (ScriptHeader.OpCode == S3_BOOT_SCRIPT_LIB_LABEL_OPCODE) {
if (AsciiStrCmp ((CHAR8 *)(UINTN)(Script+sizeof(EFI_BOOT_SCRIPT_INFORMATION)), Label) == 0) {
(*Position) = Script;
return EFI_SUCCESS;
}
}
Script = Script + ScriptHeader.Length;
}
if (CreateIfNotFound) {
LabelLength = (UINT32)AsciiStrSize(Label);
return S3BootScriptLabelInternal (BeforeOrAfter,Position, LabelLength, Label);
} else {
return EFI_NOT_FOUND;
}
}
/**
Compare two positions in the boot script table and return their relative position.
@param Position1 The positions in the boot script table to compare
@param Position2 The positions in the boot script table to compare
@param RelativePosition On return, points to the result of the comparison
@retval EFI_SUCCESS The operation succeeded. A record was added into the
specified script table.
@retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script is not supported.
If the opcode is unknow or not supported because of the PCD
Feature Flags.
@retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.
**/
RETURN_STATUS
EFIAPI
S3BootScriptCompare (
IN UINT8 *Position1,
IN UINT8 *Position2,
OUT UINTN *RelativePosition
)
{
UINT8* Script;
UINT32 TableLength;
if (RelativePosition == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check that the script is initialized and synced without adding an entry to the script.
//
Script = S3BootScriptGetEntryAddAddress (0);
if (Script == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
Script = mS3BootScriptTablePtr->TableBase;
//
// mS3BootScriptTablePtr->TableLength does not include the termination node, so add it up
//
TableLength = mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE);
if (Position1 < Script || Position1 > Script+TableLength) {
return EFI_INVALID_PARAMETER;
}
if (Position2 < Script || Position2 > Script+TableLength) {
return EFI_INVALID_PARAMETER;
}
*RelativePosition = (Position1 < Position2)?-1:((Position1 == Position2)?0:1);
return EFI_SUCCESS;
}