Vlv2TbltDevicePkg/PlatformPkgGcc.fdf

#/** @file
# FDF file of Platform.
#
# Copyright (c) 2008 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
#**/

[Defines]
DEFINE FLASH_BASE       = 0xFFC00000     #The base address of the 4Mb FLASH Device.
DEFINE FLASH_SIZE       = 0x00400000     #The flash size in bytes of the 4Mb FLASH Device.
DEFINE FLASH_BLOCK_SIZE = 0x1000        #The block size in bytes of the 4Mb FLASH Device.
DEFINE FLASH_NUM_BLOCKS = 0x400           #The number of blocks in 4Mb FLASH Device.
DEFINE FLASH_AREA_BASE_ADDRESS                                = 0xFF800000
DEFINE FLASH_AREA_SIZE                                        = 0x00800000

DEFINE FLASH_REGION_VLVMICROCODE_OFFSET                       = 0x00000000
DEFINE FLASH_REGION_VLVMICROCODE_SIZE                         = 0x00040000
DEFINE FLASH_REGION_VLVMICROCODE_BASE                         = 0xFFC00000

DEFINE FLASH_REGION_VPD_OFFSET                                = 0x00040000
DEFINE FLASH_REGION_VPD_SIZE                                  = 0x0003E000

DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_OFFSET = 0x0007E000
DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_SIZE   = 0x00002000


DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_OFFSET   = 0x00080000
DEFINE FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_SIZE     = 0x00040000

!if $(MINNOW2_FSP_BUILD) == TRUE
DEFINE FLASH_REGION_FSPBIN_OFFSET                             = 0x000C0000
DEFINE FLASH_REGION_FSPBIN_SIZE                               = 0x00048000
DEFINE FLASH_REGION_FSPBIN_BASE                               = 0xFFCC0000

DEFINE FLASH_REGION_AZALIABIN_OFFSET                          = 0x00108000
DEFINE FLASH_REGION_AZALIABIN_SIZE                            = 0x00008000
DEFINE FLASH_REGION_AZALIABIN_BASE                            = 0xFFD08000

!endif

DEFINE FLASH_REGION_FVMAIN_OFFSET                             = 0x00110000
DEFINE FLASH_REGION_FVMAIN_SIZE                               = 0x00215000

DEFINE FLASH_REGION_FV_RECOVERY2_OFFSET                       = 0x00325000
DEFINE FLASH_REGION_FV_RECOVERY2_SIZE                         = 0x0006B000

DEFINE FLASH_REGION_FV_RECOVERY_OFFSET                        = 0x00390000
DEFINE FLASH_REGION_FV_RECOVERY_SIZE                          = 0x00070000

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Vlv]
BaseAddress   = $(FLASH_BASE)|gPlatformModuleTokenSpaceGuid.PcdFlashAreaBaseAddress #The base address of the 3Mb FLASH Device.
Size          = $(FLASH_SIZE)|gPlatformModuleTokenSpaceGuid.PcdFlashAreaSize        #The flash size in bytes of the 3Mb FLASH Device.
ErasePolarity = 1
BlockSize     = $(FLASH_BLOCK_SIZE)          #The block size in bytes of the 3Mb FLASH Device.
NumBlocks     = $(FLASH_NUM_BLOCKS)          #The number of blocks in 3Mb FLASH Device.

#
#Flash location override based on actual flash map
#
SET gPlatformModuleTokenSpaceGuid.PcdFlashAreaBaseAddress            = $(FLASH_AREA_BASE_ADDRESS)
SET gPlatformModuleTokenSpaceGuid.PcdFlashAreaSize                   = $(FLASH_AREA_SIZE)

SET gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchAddress = $(FLASH_REGION_VLVMICROCODE_BASE) + 0x60
SET gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize = $(FLASH_REGION_VLVMICROCODE_SIZE) - 0x60

!if $(MINNOW2_FSP_BUILD) == TRUE
# put below PCD value setting into dsc file
#SET gFspWrapperTokenSpaceGuid.PcdCpuMicrocodePatchAddress                = $(FLASH_REGION_VLVMICROCODE_BASE)
#SET gFspWrapperTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize             = $(FLASH_REGION_VLVMICROCODE_SIZE)
#SET gFspWrapperTokenSpaceGuid.PcdFlashMicroCodeOffset                    = 0x60
#SET gFspWrapperTokenSpaceGuid.PcdFlashCodeCacheAddress                   = $(FLASH_AREA_BASE_ADDRESS)
#SET gFspWrapperTokenSpaceGuid.PcdFlashCodeCacheSize                      = $(FLASH_AREA_SIZE)
#SET gFspWrapperTokenSpaceGuid.PcdFlashFvFspBase                          = $(FLASH_REGION_FSPBIN_BASE)
#SET gFspWrapperTokenSpaceGuid.PcdFlashFvFspSize                          = $(FLASH_REGION_FSPBIN_SIZE)

!endif
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
# Fv Size can be adjusted; FVMAIN_COMPACT can be reduced to 0x120000, and FV_RECOVERY can be enlarged to 0x80000
#
################################################################################
# Since the Fce tool don't have gcc version, we can't handle default variable in Linux,
# so we hardcode the default value of variable here.
# Please note that we MUST update the binary once the default value is changed.

#
  # CPU Microcodes
  #

$(FLASH_REGION_VLVMICROCODE_OFFSET)|$(FLASH_REGION_VLVMICROCODE_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashMicroCodeAddress|gPlatformModuleTokenSpaceGuid.PcdFlashMicroCodeSize
FV = MICROCODE_FV
$(FLASH_REGION_VPD_OFFSET)|$(FLASH_REGION_VPD_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
FILE = $(WORKSPACE)/Vlv2TbltDevicePkg/Stitch/Gcc/NvStorageVariable.bin

$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_OFFSET)|$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_WORKING_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
FILE = $(WORKSPACE)/Vlv2TbltDevicePkg/Stitch/Gcc/NvStorageFtwWorking.bin

$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_OFFSET)|$(FLASH_REGION_NVSTORAGE_SUBREGION_NV_FTW_SPARE_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
FILE = $(WORKSPACE)/Vlv2TbltDevicePkg/Stitch/Gcc/NvStorageFtwSpare.bin

!if $(MINNOW2_FSP_BUILD) == TRUE

  $(FLASH_REGION_FSPBIN_OFFSET)|$(FLASH_REGION_FSPBIN_SIZE)
  gFspWrapperTokenSpaceGuid.PcdFlashFvFspBase|gFspWrapperTokenSpaceGuid.PcdFlashFvFspSize
  FILE = Vlv2MiscBinariesPkg/FspBinary/FvFsp.bin


  $(FLASH_REGION_AZALIABIN_OFFSET)|$(FLASH_REGION_AZALIABIN_SIZE)
  FILE = Vlv2TbltDevicePkg/FspAzaliaConfigData/AzaliaConfig.bin

!endif

  #
  # Main Block
  #
$(FLASH_REGION_FVMAIN_OFFSET)|$(FLASH_REGION_FVMAIN_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashFvMainBase|gPlatformModuleTokenSpaceGuid.PcdFlashFvMainSize
FV = FVMAIN_COMPACT

  #
  # FV Recovery#2
  #
$(FLASH_REGION_FV_RECOVERY2_OFFSET)|$(FLASH_REGION_FV_RECOVERY2_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashFvRecovery2Base|gPlatformModuleTokenSpaceGuid.PcdFlashFvRecovery2Size
FV = FVRECOVERY2

  #
  # FV Recovery
  #
$(FLASH_REGION_FV_RECOVERY_OFFSET)|$(FLASH_REGION_FV_RECOVERY_SIZE)
gPlatformModuleTokenSpaceGuid.PcdFlashFvRecoveryBase|gPlatformModuleTokenSpaceGuid.PcdFlashFvRecoverySize
FV = FVRECOVERY

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.MICROCODE_FV]
BlockSize          = $(FLASH_BLOCK_SIZE)
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = FALSE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

FILE RAW = 197DB236-F856-4924-90F8-CDF12FB875F3 {
  $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/$(DXE_ARCHITECTURE)/MicrocodeUpdates.bin
}

!if $(RECOVERY_ENABLE)
[FV.FVRECOVERY_COMPONENTS]
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

INF  RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchUsb.inf
INF  MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
INF  MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf
INF  MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf
INF  FatPkg/FatPei/FatPei.inf
INF  MdeModulePkg/Universal/Disk/CdExpressPei/CdExpressPei.inf
INF  SignedCapsulePkg/Universal/RecoveryModuleLoadPei/RecoveryModuleLoadPei.inf
!endif

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVRECOVERY2]
BlockSize          = $(FLASH_BLOCK_SIZE)
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = B73FE497-B92E-416e-8326-45AD0D270092



INF $(PLATFORM_PACKAGE)/PlatformInitPei/PlatformInitPei.inf

!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchSmbusArpDisabled.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/VlvInitPeim.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchInitPeim.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchSpiPeim.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PeiSmmAccess.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PeiSmmControl.inf
INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/MpS3.inf
INF EdkCompatibilityPkg/Compatibility/AcpiVariableHobOnSmramReserveHobThunk/AcpiVariableHobOnSmramReserveHobThunk.inf
!endif

# INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PiSmmCommunicationPei.inf
!if $(TPM_ENABLED) == TRUE
INF SecurityPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf
INF SecurityPkg/Tcg/TcgPei/TcgPei.inf
INF SecurityPkg/Tcg/PhysicalPresencePei/PhysicalPresencePei.inf
!endif
!if $(FTPM_ENABLE) == TRUE
INF  SecurityPkg/Tcg/Tcg2Pei/Tcg2Pei.inf #use PCD config
!endif
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

!if $(ACPI50_ENABLE) == TRUE
 INF MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTablePei/FirmwarePerformancePei.inf
!endif
!if $(PERFORMANCE_ENABLE) == TRUE
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
!endif

!if $(RECOVERY_ENABLE)
FILE FV_IMAGE = 1E9D7604-EF45-46a0-BD8A-71AC78C17AC1 {
  SECTION PEI_DEPEX_EXP = {gEfiPeiMemoryDiscoveredPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid}
  SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF {    # LZMA COMPRESS GUID
    SECTION FV_IMAGE = FVRECOVERY_COMPONENTS
  }
}
!endif

[FV.FVRECOVERY]
BlockSize          = $(FLASH_BLOCK_SIZE)
FvAlignment        = 16         #FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = B73FE497-B92E-416e-8326-45AD0D270091


!if $(MINNOW2_FSP_BUILD) == TRUE
INF IntelFspWrapperPkg/FspWrapperSecCore/FspWrapperSecCore.inf
!else
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/SecCore.inf
!endif

INF MdeModulePkg/Core/Pei/PeiMain.inf
!if $(MINNOW2_FSP_BUILD) == TRUE
INF Vlv2TbltDevicePkg/FspSupport/BootModePei/BootModePei.inf
INF IntelFspWrapperPkg/FspInitPei/FspInitPei.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/CpuPeim.inf
INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf

INF $(PLATFORM_PACKAGE)/PlatformPei/PlatformPei.inf

!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/SeCUma.inf
!endif

!if $(FTPM_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/fTPMInitPeim.inf
!endif

!if $(SOURCE_DEBUG_ENABLE) == TRUE
  INF  SourceLevelDebugPkg/DebugAgentPei/DebugAgentPei.inf
!endif


!if $(CAPSULE_ENABLE) == TRUE
INF  MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
!if $(DXE_ARCHITECTURE) == "X64"
INF  MdeModulePkg/Universal/CapsulePei/CapsuleX64.inf
!endif
!endif

!if $(MINNOW2_FSP_BUILD) == FALSE
!if $(PCIESC_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/PchEarlyInitPeim.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/MemoryInit.inf
!endif

INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf

[FV.FVMAIN]
BlockSize          = $(FLASH_BLOCK_SIZE)
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = A881D567-6CB0-4eee-8435-2E72D33E45B5

APRIORI DXE {
  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  INF  MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
  INF  MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
  }

FILE FREEFORM = C3E36D09-8294-4b97-A857-D5288FE33E28 {
    SECTION RAW = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/$(DXE_ARCHITECTURE)/BiosId.bin
  }

  #
  # EDK II Related Platform codes
  #

  !if $(MINNOW2_FSP_BUILD) == TRUE
  INF IntelFspWrapperPkg/FspNotifyDxe/FspNotifyDxe.inf
  !endif

INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
!if $(ACPI50_ENABLE) == TRUE
INF  MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTableDxe/FirmwarePerformanceDxe.inf
INF  MdeModulePkg/Universal/Acpi/FirmwarePerformanceDataTableSmm/FirmwarePerformanceSmm.inf
!endif


INF IntelFrameworkModulePkg/Universal/CpuIoDxe/CpuIoDxe.inf
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Smm/ReportStatusCodeRouterSmm.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/MpCpu.inf
INF $(PLATFORM_PACKAGE)/Metronome/Metronome.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF USE=X64 MdeModulePkg/Logo/Logo.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf

INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
INF $(PLATFORM_PACKAGE)/FvbRuntimeDxe/FvbSmm.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSpiSmm.inf
!if $(SECURE_BOOT_ENABLE)
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!endif

INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf

INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF $(PLATFORM_PACKAGE)/FvbRuntimeDxe/FvbRuntimeDxe.inf


INF $(PLATFORM_PACKAGE)/PlatformSetupDxe/PlatformSetupDxe.inf

!if $(DATAHUB_ENABLE) == TRUE
INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
!endif
INF IntelFrameworkModulePkg/Universal/StatusCode/DatahubStatusCodeHandlerDxe/DatahubStatusCodeHandlerDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/Dptf.inf

  #
  # EDK II Related Silicon codes
  #
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchS3SupportDxe.inf

!if $(USE_HPET_TIMER) == TRUE
INF PcAtChipsetPkg/HpetTimerDxe/HpetTimerDxe.inf
!else
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmartTimer.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmmControl.inf

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSmbusDxe.inf

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/IntelPchLegacyInterrupt.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchReset.inf

!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchInitDxe.inf
!endif
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSmiDispatcher.inf
!if $(PCIESC_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchPcieSmm.inf
!endif

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchSpiRuntime.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchPolicyInitDxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PchBiosWriteProtect.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmmAccess.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PciHostBridge.inf
!if $(MINNOW2_FSP_BUILD) == FALSE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/VlvInitDxe.inf
!else
INF IntelFrameworkModulePkg/Universal/LegacyRegionDxe/LegacyRegionDxe.inf
INF Vlv2TbltDevicePkg/VlvPlatformInitDxe/VlvPlatformInitDxe.inf
!endif
!if $(MINNOW2_FSP_BUILD) == FALSE
  !if $(SEC_ENABLE) == TRUE
  INF  RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/HeciDrv.inf
  INF  RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SeCPolicyInitDxe.inf
  !endif
!endif
!if $(TPM_ENABLED) == TRUE
INF SecurityPkg/Tcg/TcgConfigDxe/TcgConfigDxe.inf
INF SecurityPkg/Tcg/TcgDxe/TcgDxe.inf
INF RuleOverride = DRIVER_ACPITABLE SecurityPkg/Tcg/TcgSmm/TcgSmm.inf
!endif
!if $(FTPM_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/IA32/Tpm2DeviceSeCPei.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/Tpm2DeviceSeCDxe.inf
INF SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf
INF SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/FtpmSmm.inf
!endif

#
# EDK II Related Platform codes
#
INF $(PLATFORM_PACKAGE)/PlatformSmm/PlatformSmm.inf
INF $(PLATFORM_PACKAGE)/PlatformInfoDxe/PlatformInfoDxe.inf
INF $(PLATFORM_PACKAGE)/PlatformCpuInfoDxe/PlatformCpuInfoDxe.inf
INF $(PLATFORM_PACKAGE)/PlatformDxe/PlatformDxe.inf
INF $(PLATFORM_PACKAGE)/PciPlatform/PciPlatform.inf
INF $(PLATFORM_PACKAGE)/SaveMemoryConfig/SaveMemoryConfig.inf
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PlatformCpuPolicy.inf
INF $(PLATFORM_PACKAGE)/PpmPolicy/PpmPolicy.inf
INF $(PLATFORM_PACKAGE)/SmramSaveInfoHandlerSmm/SmramSaveInfoHandlerSmm.inf
!if $(GOP_DRIVER_ENABLE) == TRUE
 INF $(PLATFORM_PACKAGE)/PlatformGopPolicy/PlatformGopPolicy.inf
 FILE DRIVER = FF0C8745-3270-4439-B74F-3E45F8C77064 {
  SECTION DXE_DEPEX_EXP = {gPlatformGOPPolicyGuid}
  SECTION PE32 = Vlv2MiscBinariesPkg/GOP/7.2.1011/RELEASE_VS2008x86/$(DXE_ARCHITECTURE)/IntelGopDriver.efi
  SECTION UI = "IntelGopDriver"
}
!endif

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PnpDxe.inf
  #
  # SMM
  #
INF MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf

INF UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
INF MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationSmm.inf
INF $(PLATFORM_PACKAGE)/SmmSwDispatch2OnSmmSwDispatchThunk/SmmSwDispatch2OnSmmSwDispatchThunk.inf

#
# Remove the following two SMM binary modules that prevent platform from booting to UEFI Shell
#
#INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/PowerManagement2.inf
#INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/DigitalThermalSensor.inf

  #
  # ACPI
  #
INF MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF $(PLATFORM_PACKAGE)/BootScriptSaveDxe/BootScriptSaveDxe.inf
INF IntelFrameworkModulePkg/Universal/Acpi/AcpiSupportDxe/AcpiSupportDxe.inf
INF RuleOverride = ACPITABLE2 Vlv2DeviceRefCodePkg/ValleyView2Soc/CPU/PowerManagement/AcpiTables/PowerManagementAcpiTables.inf

INF RuleOverride = ACPITABLE $(PLATFORM_RC_PACKAGE)/AcpiTablesPCAT/AcpiTables.inf

INF $(PLATFORM_PACKAGE)/AcpiPlatform/AcpiPlatform.inf

INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf

  #
  # PCI
  #
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/ISPDxe.inf


#
# ISA
#
INF $(PLATFORM_PACKAGE)/Wpce791/Wpce791.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaIoDxe/IsaIoDxe.inf
!if $(SOURCE_DEBUG_ENABLE) != TRUE
INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
!endif
#INF IntelFrameworkModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.inf
#INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf

#
# SDIO
#
#INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/MmcHost.inf
#INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/MmcMediaDevice.inf
#
# IDE/SCSI/AHCI
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf

INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
!if $(SATA_ENABLE) == TRUE
INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SataController.inf
#

#
INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
!if $(SCSI_ENABLE) == TRUE
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
!endif
#
!endif
# Console
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF IntelFrameworkModulePkg/Universal/Console/VgaClassDxe/VgaClassDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
  #
  # USB
  #
!if $(USB_ENABLE) == TRUE
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
!endif

  #
  #  ECP
  #
INF EdkCompatibilityPkg/Compatibility/LegacyRegion2OnLegacyRegionThunk/LegacyRegion2OnLegacyRegionThunk.inf
INF EdkCompatibilityPkg/Compatibility/SmmBaseOnSmmBase2Thunk/SmmBaseOnSmmBase2Thunk.inf
INF EdkCompatibilityPkg/Compatibility/SmmBaseHelper/SmmBaseHelper.inf
INF EdkCompatibilityPkg/Compatibility/SmmAccess2OnSmmAccessThunk/SmmAccess2OnSmmAccessThunk.inf
INF EdkCompatibilityPkg/Compatibility/SmmControl2OnSmmControlThunk/SmmControl2OnSmmControlThunk.inf
INF EdkCompatibilityPkg/Compatibility/FvOnFv2Thunk/FvOnFv2Thunk.inf
  #
  # SMBIOS
  #
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF $(PLATFORM_PACKAGE)/SmBiosMiscDxe/SmBiosMiscDxe.inf

INF RuleOverride = BINARY $(PLATFORM_BINARY_PACKAGE)/$(DXE_ARCHITECTURE)$(TARGET)/$(DXE_ARCHITECTURE)/SmbiosMemory.inf

  #
  # Legacy Modules
  #
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf

#
# FAT file system
#
INF FatPkg/EnhancedFatDxe/Fat.inf

#
# UEFI Shell
#
FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {
#    SECTION PE32 = EdkShellBinPkg/FullShell/$(EDK_DXE_ARCHITECTURE)/Shell_Full.efi
    SECTION PE32 = ShellBinPkg/UefiShell/$(EDK_DXE_ARCHITECTURE)/Shell.efi
  }

#
# dp command
#
!if $(PERFORMANCE_ENABLE) == TRUE
INF ShellPkg/DynamicCommand/DpDynamicCommand/DpDynamicCommand.inf
!endif

!if $(GOP_DRIVER_ENABLE) == TRUE
FILE FREEFORM = 878AC2CC-5343-46F2-B563-51F89DAF56BA {
  SECTION RAW = Vlv2MiscBinariesPkg/GOP/7.2.1011/VBT/MNW2/Vbt.bin
  SECTION UI = "IntelGopVbt"
}
!endif

#
# Network Modules
#
!if $(NETWORK_ENABLE) == TRUE
  FILE DRIVER = 22DE1691-D65D-456a-993E-A253DD1F308C {
    SECTION PE32 = Vlv2MiscBinariesPkg/UNDI/RtkUndiDxe/$(DXE_ARCHITECTURE)/RtkUndiDxe.efi
    SECTION UI = "UNDI"
  }
  INF  MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
  INF  MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
  INF  MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
  INF  MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
  INF  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
  INF  MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
  INF  MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
  INF  MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
  !if $(NETWORK_IP6_ENABLE) == TRUE
  INF  NetworkPkg/Ip6Dxe/Ip6Dxe.inf
  INF  NetworkPkg/Dhcp6Dxe/Dhcp6Dxe.inf
  INF  NetworkPkg/IpSecDxe/IpSecDxe.inf
  INF  NetworkPkg/Udp6Dxe/Udp6Dxe.inf
  INF  NetworkPkg/Mtftp6Dxe/Mtftp6Dxe.inf
  !endif
  !if $(NETWORK_IP6_ENABLE) == TRUE
  INF  NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
  INF  NetworkPkg/TcpDxe/TcpDxe.inf
  !else
  INF  MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
  INF  MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
  !endif
  !if $(NETWORK_VLAN_ENABLE) == TRUE
  INF  MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
  !endif
  !if $(NETWORK_ISCSI_ENABLE) == TRUE
  !if $(NETWORK_IP6_ENABLE) == TRUE
    INF  NetworkPkg/IScsiDxe/IScsiDxe.inf
  !else
    INF  MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
  !endif
  !endif
!endif

!if $(CAPSULE_ENABLE)
INF  MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmpDxe.inf

#
# Minnow Max System Firmware FMP
#
INF  FILE_GUID = $(FMP_MINNOW_MAX_SYSTEM) FmpDevicePkg/FmpDxe/FmpDxe.inf

#
# Sample Device FMP
#
INF  FILE_GUID = $(FMP_GREEN_SAMPLE_DEVICE) FmpDevicePkg/FmpDxe/FmpDxe.inf
INF  FILE_GUID = $(FMP_BLUE_SAMPLE_DEVICE)  FmpDevicePkg/FmpDxe/FmpDxe.inf
INF  FILE_GUID = $(FMP_RED_SAMPLE_DEVICE)   FmpDevicePkg/FmpDxe/FmpDxe.inf

!endif

!if $(MICOCODE_CAPSULE_ENABLE)
INF  IntelSiliconPkg/Feature/Capsule/MicrocodeUpdateDxe/MicrocodeUpdateDxe.inf
!endif

!if $(RECOVERY_ENABLE)
FILE FREEFORM = PCD(gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiRsa2048Sha256TestPublicKeyFileGuid) {
     SECTION RAW = BaseTools/Source/Python/Rsa2048Sha256Sign/TestSigningPublicKey.bin
     SECTION UI = "Rsa2048Sha256TestSigningPublicKey"
     }
!endif

[FV.FVMAIN_COMPACT]
BlockSize          = $(FLASH_BLOCK_SIZE)
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE



FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
!if $(LZMA_ENABLE) == TRUE
# LZMA Compress
       SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
          SECTION FV_IMAGE = FVMAIN
       }
!else
!if $(DXE_COMPRESS_ENABLE) == TRUE
# Tiano Compress
       SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
          SECTION FV_IMAGE = FVMAIN
       }
!else
# No Compress
       SECTION COMPRESS PI_NONE {
          SECTION FV_IMAGE = FVMAIN
       }
!endif
!endif
     }

[FV.SETUP_DATA]
BlockSize          = $(FLASH_BLOCK_SIZE)
#NumBlocks         = 0x10
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    PE32  PE32    Align = 8       $(INF_OUTPUT)/$(MODULE_NAME).efi
    RAW BIN       Align = 16      |.com
  }

[Rule.Common.SEC.BINARY]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    PE32  PE32    Align = 8       |.efi
!if $(MINNOW2_FSP_BUILD) == TRUE
    RAW   RAW                     |.raw
!else
    RAW   BIN     Align = 16      |.com
!endif
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID)            {
    PE32       PE32    Align = Auto      $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI       STRING="$(MODULE_NAME)" Optional
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
     PE32        PE32   Align = Auto     $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI        STRING="$(MODULE_NAME)" Optional
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM.BINARY]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional        |.depex
     PE32        PE32   Align = Auto     |.efi
     UI        STRING="$(MODULE_NAME)" Optional
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.PEIM.BIOSID]
  FILE PEIM = $(NAMED_GUID) {
     RAW       BIN                       BiosId.bin
     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
     PE32        PE32   Align = Auto     $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI        STRING="$(MODULE_NAME)" Optional
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.USER_DEFINED.APINIT]
  FILE RAW = $(NAMED_GUID) Fixed Align=4K {
     RAW SEC_BIN |.com
     }
#cjia 2011-07-21
[Rule.Common.USER_DEFINED.LEGACY16]
  FILE FREEFORM = $(NAMED_GUID) {
     UI  STRING="$(MODULE_NAME)" Optional
     RAW BIN |.bin
     }
#cjia

[Rule.Common.USER_DEFINED.ASM16]
  FILE FREEFORM = $(NAMED_GUID) {
     UI  STRING="$(MODULE_NAME)" Optional
     RAW BIN |.com
   }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_DRIVER.BINARY]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       |.depex
    PE32      PE32                     |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_DRIVER.NATIVE_BINARY]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional      $(WORKSPACE)/$(PLATFORM_PACKAGE)/IntelGopDepex/IntelGopDriver.depex
    PE32      PE32                    |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_DRIVER.BINARY]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       |.depex
    PE32      PE32                     |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_DRIVER.DRIVER_ACPITABLE]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
    RAW ACPI  Optional                |.acpi
    RAW ASL   Optional                |.aml
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_RUNTIME_DRIVER.BINARY]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       |.depex
    PE32      PE32                     |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_SMM_DRIVER]
  FILE SMM = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_SMM_DRIVER.BINARY]
  FILE SMM = $(NAMED_GUID) {
    SMM_DEPEX SMM_DEPEX                |.depex
    PE32      PE32                     |.efi
    RAW       BIN  Optional            |.aml
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.DXE_SMM_DRIVER.DRIVER_ACPITABLE]
  FILE SMM = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
    RAW ACPI  Optional                |.acpi
    RAW ASL   Optional                |.aml
  }

[Rule.Common.SMM_CORE]
  FILE SMM_CORE = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.SMM_CORE.BINARY]
  FILE SMM_CORE = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       |.depex
    PE32      PE32                     |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION.UI]
  FILE APPLICATION = $(NAMED_GUID) {
    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI        STRING="Enter Setup"
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.USER_DEFINED]
  FILE FREEFORM = $(NAMED_GUID) {
    UI  STRING="$(MODULE_NAME)" Optional
    RAW BIN                |.bin
  }

[Rule.Common.USER_DEFINED.BINARY]
  FILE FREEFORM = $(NAMED_GUID) {
    UI  STRING="$(MODULE_NAME)" Optional
    RAW BIN                |.bin
  }

[Rule.Common.USER_DEFINED.ACPITABLE]
  FILE FREEFORM = $(NAMED_GUID) {
    RAW ACPI  Optional            |.acpi
    RAW ASL   Optional            |.aml
  }

[Rule.Common.USER_DEFINED.ACPITABLE2]
  FILE FREEFORM = $(NAMED_GUID) {
    RAW ASL   Optional            |.aml
  }

[Rule.Common.ACPITABLE]
  FILE FREEFORM = $(NAMED_GUID) {
    RAW ACPI  Optional            |.acpi
    RAW ASL   Optional            |.aml
  }

[Rule.Common.PEIM.FMP_IMAGE_DESC]
  FILE PEIM = $(NAMED_GUID) {
     RAW BIN                  |.acpi
     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
     PE32      PE32    Align=4K          $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI       STRING="$(MODULE_NAME)" Optional
     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }