| /* |
| * Copyright 2013 Google Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but without any warranty; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <arch/io.h> |
| |
| #include "base/init_funcs.h" |
| #include "board/daisy/i2c_arb.h" |
| #include "boot/fit.h" |
| #include "drivers/bus/i2c/s3c24x0.h" |
| #include "drivers/bus/i2s/exynos5.h" |
| #include "drivers/bus/i2s/i2s.h" |
| #include "drivers/bus/spi/exynos5.h" |
| #include "drivers/bus/usb/usb.h" |
| #include "drivers/ec/cros/i2c.h" |
| #include "drivers/flash/spi.h" |
| #include "drivers/gpio/exynos5250.h" |
| #include "drivers/gpio/sysinfo.h" |
| #include "drivers/power/exynos.h" |
| #include "drivers/sound/i2s.h" |
| #include "drivers/sound/max98095.h" |
| #include "drivers/sound/route.h" |
| #include "drivers/storage/blockdev.h" |
| #include "drivers/storage/exynos_mshc.h" |
| #include "drivers/tpm/slb9635_i2c.h" |
| #include "drivers/tpm/tpm.h" |
| #include "vboot/util/flag.h" |
| |
| static uint32_t *i2c_cfg = (uint32_t *)(0x10050000 + 0x234); |
| |
| static int board_setup(void) |
| { |
| sysinfo_install_flags(); |
| |
| fit_set_compat("google,snow"); |
| |
| Exynos5250Gpio *lid_switch = new_exynos5250_gpio_input(GPIO_X, 3, 5); |
| Exynos5250Gpio *ec_in_rw = new_exynos5250_gpio_input(GPIO_D, 1, 7); |
| |
| flag_replace(FLAG_LIDSW, &lid_switch->ops); |
| flag_install(FLAG_ECINRW, &ec_in_rw->ops); |
| |
| // The power switch is active low and needs to be inverted. |
| Exynos5250Gpio *power_switch_l = |
| new_exynos5250_gpio_input(GPIO_X, 1, 3); |
| flag_replace(FLAG_PWRSW, new_gpio_not(&power_switch_l->ops)); |
| |
| // Switch from hi speed I2C to the normal one. |
| writel(0x0, i2c_cfg); |
| |
| S3c24x0I2c *i2c3 = new_s3c24x0_i2c(0x12c90000); |
| S3c24x0I2c *i2c4 = new_s3c24x0_i2c(0x12ca0000); |
| S3c24x0I2c *i2c7 = new_s3c24x0_i2c(0x12cd0000); |
| |
| Exynos5250Gpio *request_gpio = new_exynos5250_gpio_output(GPIO_F, 0, 3); |
| Exynos5250Gpio *grant_gpio = new_exynos5250_gpio_input(GPIO_E, 0, 4); |
| SnowI2cArb *arb4 = new_snow_i2c_arb(&i2c4->ops, &request_gpio->ops, |
| &grant_gpio->ops); |
| |
| CrosEcI2cBus *cros_ec_i2c_bus = new_cros_ec_i2c_bus(&arb4->ops, 0x1e); |
| cros_ec_set_bus(&cros_ec_i2c_bus->ops); |
| |
| tpm_set_ops(&new_slb9635_i2c(&i2c3->ops, 0x20)->base.ops); |
| |
| Exynos5Spi *spi1 = new_exynos5_spi(0x12d30000); |
| |
| flash_set_ops(&new_spi_flash(&spi1->ops, 0x400000)->ops); |
| |
| Exynos5I2s *i2s1 = new_exynos5_i2s(0x12d60000, 16, 2, 256); |
| I2sSource *i2s_source = new_i2s_source(&i2s1->ops, 48000, 2, 16000); |
| SoundRoute *sound_route = new_sound_route(&i2s_source->ops); |
| Max98095Codec *codec = new_max98095_codec(&i2c7->ops, 0x11, 16, 48000, |
| 256, 1); |
| list_insert_after(&codec->component.list_node, |
| &sound_route->components); |
| sound_set_ops(&sound_route->ops); |
| |
| MshciHost *emmc = new_mshci_host(0x12200000, 400000000, |
| 8, 0, 0x03030001); |
| MshciHost *sd_card = new_mshci_host(0x12220000, 400000000, |
| 4, 1, 0x03020001); |
| list_insert_after(&emmc->mmc.ctrlr.list_node, |
| &fixed_block_dev_controllers); |
| list_insert_after(&sd_card->mmc.ctrlr.list_node, |
| &removable_block_dev_controllers); |
| |
| power_set_ops(&exynos_power_ops); |
| |
| UsbHostController *usb_drd = new_usb_hc(XHCI, 0x12000000); |
| UsbHostController *usb_host20 = new_usb_hc(EHCI, 0x12110000); |
| UsbHostController *usb_host11 = new_usb_hc(OHCI, 0x12120000); |
| |
| list_insert_after(&usb_drd->list_node, &usb_host_controllers); |
| list_insert_after(&usb_host20->list_node, &usb_host_controllers); |
| list_insert_after(&usb_host11->list_node, &usb_host_controllers); |
| |
| return 0; |
| } |
| |
| INIT_FUNC(board_setup); |