| /* |
| * Copyright 2014 Rockchip Electronics Co., Ltd. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but without any warranty; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <arch/io.h> |
| |
| #include "base/init_funcs.h" |
| #include "boot/fit.h" |
| #include "drivers/gpio/rockchip.h" |
| #include "drivers/bus/i2c/rockchip.h" |
| #include "drivers/flash/spi.h" |
| #include "drivers/bus/spi/rockchip.h" |
| #include "drivers/ec/cros/spi.h" |
| #include "drivers/tpm/slb9635_i2c.h" |
| #include "drivers/tpm/tpm.h" |
| #include "board/veyron_pinky/power_ops.h" |
| #include "drivers/power/rk808.h" |
| #include "drivers/storage/dw_mmc.h" |
| #include "drivers/storage/rk_mmc.h" |
| |
| #include "drivers/gpio/sysinfo.h" |
| #include "vboot/util/flag.h" |
| #include "drivers/bus/i2s/rockchip.h" |
| #include "drivers/sound/i2s.h" |
| #include "drivers/sound/route.h" |
| #include "drivers/sound/max98090.h" |
| |
| #include "drivers/bus/usb/usb.h" |
| |
| /* Careful: dt_compat gets retained in fit.c, must not be allocated on stack! */ |
| static const char dt_compat_pattern[] = "google,veyron-pinky-rev%d"; |
| static char dt_compat[sizeof(dt_compat_pattern)]; |
| |
| static int board_setup(void) |
| { |
| /* We started adding board IDs (from 0) with the rev1 board... m( */ |
| snprintf(dt_compat, sizeof(dt_compat), dt_compat_pattern, |
| lib_sysinfo.board_id + 1); |
| fit_override_kernel_compat(dt_compat); |
| |
| RkSpi *spi2 = new_rockchip_spi(0xff130000, 0, 0, 0); |
| flash_set_ops(&new_spi_flash(&spi2->ops, 0x400000)->ops); |
| |
| RkSpi *spi0 = new_rockchip_spi(0xff110000, 0, 0, 0); |
| cros_ec_set_bus(&new_cros_ec_spi_bus(&spi0->ops)->ops); |
| |
| sysinfo_install_flags(); |
| RkGpio *lid_switch = new_rk_gpio_input((RkGpioSpec) {.port = 7, |
| .bank = GPIO_B, |
| .idx = 5}); |
| RkGpio *ec_in_rw = new_rk_gpio_input((RkGpioSpec) {.port = 0, |
| .bank = GPIO_A, |
| .idx = 7}); |
| flag_replace(FLAG_LIDSW, &lid_switch->ops); |
| flag_install(FLAG_ECINRW, &ec_in_rw->ops); |
| |
| RkI2c *i2c1 = new_rockchip_i2c((void *)0xff140000); |
| tpm_set_ops(&new_slb9635_i2c(&i2c1->ops, 0x20)->base.ops); |
| |
| RockchipI2s *i2s0 = new_rockchip_i2s(0xff890000, 16, 2, 256); |
| I2sSource *i2s_source = new_i2s_source(&i2s0->ops, 48000, 2, 16000); |
| SoundRoute *sound_route = new_sound_route(&i2s_source->ops); |
| RkI2c *i2c2 = new_rockchip_i2c((void *)0xff660000); |
| Max98090Codec *codec = new_max98090_codec(&i2c2->ops, 0x10, 16, 48000, |
| 256, 1); |
| list_insert_after(&codec->component.list_node, |
| &sound_route->components); |
| sound_set_ops(&sound_route->ops); |
| |
| RkI2c *i2c0 = new_rockchip_i2c((void *)0xff650000); |
| Rk808Pmic *pmic = new_rk808_pmic(&i2c0->ops, 0x1b); |
| RkGpio *reboot_gpio = new_rk_gpio_output((RkGpioSpec) {.port = 0, |
| .bank = GPIO_B, |
| .idx = 2}); |
| RkPowerOps *rk_power_ops = new_rk_power_ops(&reboot_gpio->ops, |
| &pmic->ops, 1); |
| power_set_ops(&rk_power_ops->ops); |
| |
| DwmciHost *emmc = new_rkdwmci_host(0xff0f0000, 594000000, 8, 0, NULL); |
| list_insert_after(&emmc->mmc.ctrlr.list_node, |
| &fixed_block_dev_controllers); |
| |
| RkGpio *card_detect = new_rk_gpio_input((RkGpioSpec) {.port = 7, |
| .bank = GPIO_A, |
| .idx = 5}); |
| GpioOps *card_detect_ops = &card_detect->ops; |
| card_detect_ops = new_gpio_not(card_detect_ops); |
| DwmciHost *sd_card = new_rkdwmci_host(0xff0c0000, 594000000, 4, 1, |
| card_detect_ops); |
| list_insert_after(&sd_card->mmc.ctrlr.list_node, |
| &removable_block_dev_controllers); |
| |
| UsbHostController *usb_host0 = new_usb_hc(DWC2, 0xff580000); |
| list_insert_after(&usb_host0->list_node, &usb_host_controllers); |
| |
| UsbHostController *usb_host1 = new_usb_hc(DWC2, 0xff540000); |
| list_insert_after(&usb_host1->list_node, &usb_host_controllers); |
| |
| return 0; |
| } |
| |
| INIT_FUNC(board_setup); |