| /* |
| * Copyright 2013 Google Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but without any warranty; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <stdint.h> |
| |
| #include "base/coreboot/sysinfo.h" |
| #include "base/init_funcs.h" |
| #include "base/io.h" |
| #include "base/list.h" |
| #include "drivers/blockdev/ahci.h" |
| #include "drivers/blockdev/blockdev.h" |
| #include "drivers/board/board.h" |
| #include "drivers/board/board_helpers.h" |
| #include "drivers/board/samus/coreboot.h" |
| #include "drivers/board/samus/device_nvs.h" |
| #include "drivers/bus/i2c/designware.h" |
| #include "drivers/bus/i2c/i2c.h" |
| #include "drivers/bus/i2s/broadwell/alc5677.h" |
| #include "drivers/bus/i2s/broadwell/broadwell.h" |
| #include "drivers/bus/i2s/i2s.h" |
| #include "drivers/bus/pci/pci.h" |
| #include "drivers/display/framebuffer.h" |
| #include "drivers/framebuffer/intel_i915.h" |
| #include "drivers/ec/cros/lpc.h" |
| #include "drivers/gpio/fwdb.h" |
| #include "drivers/gpio/gpio.h" |
| #include "drivers/keyboard/dynamic.h" |
| #include "drivers/keyboard/ps2.h" |
| #include "drivers/power/pch.h" |
| #include "drivers/sound/i2s.h" |
| #include "drivers/sound/route.h" |
| #include "drivers/sound/rt5677.h" |
| #include "drivers/tpm/lpc.h" |
| #include "drivers/tpm/tpm.h" |
| #include "drivers/uart/8250.h" |
| |
| PUB_STAT(flag_option_roms_loaded, gpio_get(&fwdb_gpio_oprom.ops)) |
| PUB_STAT(flag_lid_open, gpio_get(&fwdb_gpio_lidsw.ops)) |
| PUB_STAT(flag_power, gpio_get(&fwdb_gpio_pwrsw.ops)) |
| |
| // Put device in D0 state. |
| static void device_enable(int sio_index) |
| { |
| device_nvs_t *nvs = get_sysinfo()->acpi_gnvs + DEVICE_NVS_OFFSET; |
| uint32_t *reg_pcs = |
| (uint32_t *)(uintptr_t)(nvs->bar1[sio_index] + 0x84); |
| |
| // Put device in D0 state. Disable D3Hot. |
| write32(reg_pcs, read32(reg_pcs) & ~3); |
| (void)read32(reg_pcs); |
| } |
| |
| static DesignwareI2c *i2c_enable(int sio_index) |
| { |
| device_nvs_t *nvs = get_sysinfo()->acpi_gnvs + DEVICE_NVS_OFFSET; |
| uint32_t *ppr_clock = |
| (uint32_t *)(uintptr_t)(nvs->bar0[sio_index] + 0x800); |
| |
| device_enable(sio_index); |
| |
| // Enable clock to the device. |
| write32(ppr_clock, read32(ppr_clock) | (1 << 0)); |
| (void)read32(ppr_clock); |
| |
| return new_designware_i2c(nvs->bar0[sio_index], 400000); |
| } |
| |
| static BdwI2s *i2s_enable(int ssp) |
| { |
| device_nvs_t *nvs = get_sysinfo()->acpi_gnvs + DEVICE_NVS_OFFSET; |
| |
| device_enable(SIO_NVS_ADSP); |
| |
| return new_bdw_i2s(nvs->bar0[SIO_NVS_ADSP], ssp, 16, |
| &broadwell_alc5677_settings); |
| } |
| |
| PUB_DYN(_framebuffer, new_intel_i915_framebuffer(PCI_DEV(0, 2, 0))) |
| PUB_DYN(display, &new_fb_display(&board__framebuffer()->ops, |
| &board__panel()->ops)->ops) |
| |
| |
| static int board_setup(void) |
| { |
| CrosEcLpcBus *cros_ec_lpc_bus = |
| new_cros_ec_lpc_bus(CROS_EC_LPC_BUS_GENERIC); |
| cros_ec_set_bus(&cros_ec_lpc_bus->ops); |
| |
| AhciCtrlr *ahci = new_ahci_ctrlr(PCI_DEV(0, 31, 2)); |
| list_insert_after(&ahci->ctrlr.list_node, &fixed_block_dev_controllers); |
| |
| tpm_set_ops(&new_lpc_tpm((void *)(uintptr_t)0xfed40000)->ops); |
| |
| // Setup sound route via I2S to RT5677 codec. |
| BdwI2s *i2s = i2s_enable(0); |
| I2sSource *i2s_source = new_i2s_source(&i2s->ops, 48000, 2, 16000); |
| SoundRoute *sound_route = new_sound_route(&i2s_source->ops); |
| |
| DesignwareI2c *i2c0 = i2c_enable(SIO_NVS_I2C0); |
| rt5677Codec *codec = new_rt5677_codec(&i2c0->ops, 0x2c, 16, |
| 48000, 256, 0, 0); |
| |
| list_insert_after(&codec->component.list_node, |
| &sound_route->components); |
| sound_set_ops(&sound_route->ops); |
| |
| return 0; |
| } |
| |
| PUB_STAT(power, &pch_power_ops) |
| |
| PUB_DYN(debug_uart, &new_uart_8250_io(0x3f8)->uart.ops) |
| |
| PUB_ARR(trusted_keyboards, &new_ps2_keyboard()->ops) |
| PUB_ARR(untrusted_keyboards, &dynamic_keyboards.ops) |
| |
| INIT_FUNC(board_setup); |