| #!/usr/bin/env perl |
| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at http://curl.haxx.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| # $Id$ |
| ########################################################################### |
| |
| ########################### |
| # What is This Script? |
| ########################### |
| |
| # testcurl.pl is the master script to use for automatic testing of CVS-curl. |
| # This is written for the purpose of being run from a crontab job or similar |
| # at a regular interval. The output is suitable to be mailed to |
| # curl-autocompile@haxx.se to be dealt with automatically (make sure the |
| # subject includes the word "autobuild" as the mail gets silently discarded |
| # otherwise). The most current build status (with a resonable backlog) will |
| # be published on the curl site, at http://curl.haxx.se/auto/ |
| |
| # USAGE: |
| # testcurl.pl [options] [curl-daily-name] > output |
| |
| # Options: |
| # |
| # --configure=[options] Configure options |
| # --crosscompile This is a crosscompile |
| # --desc=[desc] Description of your test system |
| # --email=[email] Set email address to report as |
| # --mktarball=[command] Command to run after completed test |
| # --name=[name] Set name to report as |
| # --nocvsup Don't update from CVS even though it is a CVS tree |
| # --nobuildconf Don't run buildconf |
| # --runtestopts=[options] Options to pass to runtests.pl |
| # --setup=[file name] File name to read setup from (deprecated) |
| # --target=[your os] Specify your target environment. |
| # |
| # if [curl-daily-name] is omitted, a 'curl' CVS directory is assumed. |
| # |
| |
| use strict; |
| |
| use Cwd; |
| |
| # Turn on warnings (equivalent to -w, which can't be used with /usr/bin/env) |
| #BEGIN { $^W = 1; } |
| |
| use vars qw($version $fixed $infixed $CURLDIR $CVS $pwd $build $buildlog |
| $buildlogname $configurebuild $targetos $confsuffix $binext |
| $libext); |
| use vars qw($name $email $desc $confopts $runtestopts $setupfile $mktarball |
| $nocvsup $nobuildconf $crosscompile); |
| |
| # version of this script |
| $version='$Revision$'; |
| $fixed=0; |
| |
| # Determine if we're running from CVS or a canned copy of curl, |
| # or if we got a specific target option or setup file option. |
| $CURLDIR="curl"; |
| $CVS=1; |
| $setupfile = 'setup'; |
| while ($ARGV[0]) { |
| if ($ARGV[0] =~ /--target=/) { |
| $targetos = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--setup=/) { |
| $setupfile = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--mktarball=/) { |
| $mktarball = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--name=/) { |
| $name = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--email=/) { |
| $email = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--desc=/) { |
| $desc = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--configure=/) { |
| $confopts = (split(/=/, shift @ARGV))[1]; |
| } |
| elsif ($ARGV[0] =~ /--nocvsup/) { |
| $nocvsup=1; |
| shift @ARGV; |
| } |
| elsif ($ARGV[0] =~ /--nobuildconf/) { |
| $nobuildconf=1; |
| shift @ARGV; |
| } |
| elsif ($ARGV[0] =~ /--crosscompile/) { |
| $crosscompile=1; |
| shift @ARGV; |
| } |
| elsif ($ARGV[0] =~ /--runtestopts=/) { |
| $runtestopts = (split(/=/, shift @ARGV, 2))[1]; |
| } |
| else { |
| $CURLDIR=shift @ARGV; |
| $CVS=0; |
| } |
| } |
| |
| # Do the platform-specific stuff here |
| $configurebuild = 1; |
| $confsuffix = ''; |
| $binext = ''; |
| $libext = '.la'; # .la since both libcurl and libcares are made with libtool |
| if ($^O eq 'MSWin32' || $targetos) { |
| if (!$targetos) { |
| # If no target defined on Win32 lets assume vc |
| $targetos = 'vc'; |
| } |
| if ($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/) { |
| $binext = '.exe'; |
| $libext = '.lib' if ($targetos =~ /vc/ || $targetos =~ /borland/); |
| $libext = '.a' if ($targetos =~ /mingw32/); |
| } |
| elsif ($targetos =~ /netware/) { |
| $configurebuild = 0; |
| $binext = '.nlm'; |
| $libext = '.lib'; |
| } |
| } |
| |
| if (($^O eq 'MSWin32') && ($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/)) { |
| |
| # Set these things only when building ON Windows and for Win32 platform. |
| # FOR Windows since we might be cross-compiling on another system. Non- |
| # Windows builds still default to configure-style builds with no confsuffix. |
| |
| $configurebuild = 0; |
| $confsuffix = '-win32'; |
| } |
| |
| |
| $ENV{LANG}="C"; |
| |
| sub rmtree($) { |
| my $target = $_[0]; |
| if ($^O eq 'MSWin32') { |
| foreach (glob($target)) { |
| s:/:\\:g; |
| system("rd /s /q $_"); |
| } |
| } else { |
| system("rm -rf $target"); |
| } |
| } |
| |
| sub grepfile($$) { |
| my ($target, $fn) = @_; |
| open(F, $fn) or die; |
| while (<F>) { |
| if (/$target/) { |
| close(F); |
| return 1; |
| } |
| } |
| close(F); |
| return 0; |
| } |
| |
| sub logit($) { |
| my $text=$_[0]; |
| if ($text) { |
| print "testcurl: $text\n"; |
| } |
| } |
| |
| sub mydie($){ |
| my $text=$_[0]; |
| logit "$text"; |
| chdir $pwd; # cd back to the original root dir |
| |
| if ($pwd && $build) { |
| # we have a build directory name, remove the dir |
| logit "removing the $build dir"; |
| rmtree "$pwd/$build"; |
| } |
| if (-r $buildlog) { |
| # we have a build log output file left, remove it |
| logit "removing the $buildlogname file"; |
| unlink "$buildlog"; |
| } |
| logit "ENDING HERE"; # last line logged! |
| exit 1; |
| } |
| |
| if (open(F, "$setupfile")) { |
| while (<F>) { |
| if (/(\w+)=(.*)/) { |
| eval "\$$1=$2;"; |
| } |
| } |
| close(F); |
| $infixed=$fixed; |
| } else { |
| $infixed=0; # so that "additional args to configure" works properly first time... |
| } |
| |
| if (!$name) { |
| print "please enter your name\n"; |
| $name = <>; |
| chomp $name; |
| $fixed=1; |
| } |
| |
| if (!$email) { |
| print "please enter your contact email address\n"; |
| $email = <>; |
| chomp $email; |
| $fixed=2; |
| } |
| |
| if (!$desc) { |
| print "please enter a one line system description\n"; |
| $desc = <>; |
| chomp $desc; |
| $fixed=3; |
| } |
| |
| if (!$confopts) { |
| if ($infixed < 4) { |
| print "please enter your additional arguments to configure\n"; |
| print "examples: --with-ssl --enable-debug --enable-ipv6 --with-krb4\n"; |
| $confopts = <>; |
| chomp $confopts; |
| } |
| } |
| |
| |
| if ($fixed < 4) { |
| $fixed=4; |
| open(F, ">$setupfile") or die; |
| print F "name='$name'\n"; |
| print F "email='$email'\n"; |
| print F "desc='$desc'\n"; |
| print F "confopts='$confopts'\n"; |
| print F "fixed='$fixed'\n"; |
| close(F); |
| } |
| |
| logit "STARTING HERE"; # first line logged, for scripts to trigger on |
| logit "NAME = $name"; |
| logit "EMAIL = $email"; |
| logit "DESC = $desc"; |
| logit "CONFOPTS = $confopts"; |
| logit "CPPFLAGS = ".$ENV{CPPFLAGS}; |
| logit "CFLAGS = ".$ENV{CFLAGS}; |
| logit "LDFLAGS = ".$ENV{LDFLAGS}; |
| logit "CC = ".$ENV{CC}; |
| logit "target = ".$targetos; |
| logit "version = $version"; # script version |
| logit "date = ".(scalar gmtime)." UTC"; |
| |
| # Make $pwd to become the path without newline. We'll use that in order to cut |
| # off that path from all possible logs and error messages etc. |
| $pwd = cwd(); |
| |
| if (-d $CURLDIR) { |
| if ($CVS && -d "$CURLDIR/CVS") { |
| logit "$CURLDIR is verified to be a fine source dir"; |
| # remove the generated sources to force them to be re-generated each |
| # time we run this test |
| unlink "$CURLDIR/src/hugehelp.c"; |
| } elsif (!$CVS && -f "$CURLDIR/tests/testcurl.pl") { |
| logit "$CURLDIR is verified to be a fine daily source dir" |
| } else { |
| mydie "$CURLDIR is not a daily source dir or checked out from CVS!" |
| } |
| } |
| $build="build-$$"; |
| $buildlogname="buildlog-$$"; |
| $buildlog="$pwd/$buildlogname"; |
| |
| # remove any previous left-overs |
| rmtree "build-*"; |
| rmtree "buildlog-*"; |
| |
| # this is to remove old build logs that ended up in the wrong dir |
| foreach (glob("$CURLDIR/buildlog-*")) { unlink $_; } |
| |
| # create a dir to build in |
| mkdir $build, 0777; |
| |
| if (-d $build) { |
| logit "build dir $build was created fine"; |
| } else { |
| mydie "failed to create dir $build"; |
| } |
| |
| # get in the curl source tree root |
| chdir $CURLDIR; |
| |
| # Do the CVS thing, or not... |
| if ($CVS) { |
| |
| # this is a temporary fix to make things work again, remove later |
| logit "remove ares/aclocal.m4"; |
| unlink "ares/aclocal.m4"; |
| |
| logit "update from CVS"; |
| my $cvsstat; |
| |
| sub cvsup() { |
| # update quietly to the latest CVS |
| logit "run cvs up"; |
| if($nocvsup) { |
| logit "Skipping CVS update (--nocvsup)"; |
| return 1; |
| } |
| else { |
| system("cvs -Q up -dP 2>&1"); |
| } |
| |
| $cvsstat=$?; |
| |
| # return !RETURNVALUE so that errors return 0 while goodness |
| # returns 1 |
| return !$cvsstat; |
| } |
| |
| my $att=0; |
| while (!cvsup()) { |
| $att++; |
| logit "failed CVS update attempt number $att."; |
| if ($att > 10) { |
| $cvsstat=111; |
| last; # get out of the loop |
| } |
| sleep 5; |
| } |
| |
| if ($cvsstat != 0) { |
| mydie "failed to update from CVS ($cvsstat), exiting"; |
| } |
| |
| if($nobuildconf) { |
| logit "told to not run buildconf"; |
| } |
| elsif ($configurebuild) { |
| # remove possible left-overs from the past |
| unlink "configure"; |
| unlink "autom4te.cache"; |
| |
| # generate the build files |
| logit "invoke buildconf, but filter off the silly aclocal warnings"; |
| open(F, "./buildconf 2>&1 |") or die; |
| open(LOG, ">$buildlog") or die; |
| while (<F>) { |
| next if /warning: underquoted definition of/; |
| print; |
| print LOG; |
| } |
| close(F); |
| close(LOG); |
| |
| if (grepfile("^buildconf: OK", $buildlog)) { |
| logit "buildconf was successful"; |
| } |
| else { |
| mydie "buildconf was NOT successful"; |
| } |
| |
| if($confopts =~ /--enable-ares/) { |
| logit "run buildconf for ares"; |
| chdir "ares"; |
| open(F, "./buildconf 2>&1 |") or die; |
| open(LOG, ">$buildlog") or die; |
| while (<F>) { |
| next if /warning: underquoted definition of/; |
| print; |
| print LOG; |
| } |
| close(F); |
| close(LOG); |
| chdir ".."; |
| } |
| |
| } |
| else { |
| logit "buildconf was successful (dummy message)"; |
| } |
| } |
| |
| if ($configurebuild) { |
| if (-f "configure") { |
| logit "configure created (at least it exists)"; |
| } else { |
| mydie "no configure created/found"; |
| } |
| } else { |
| logit "configure created (dummy message)"; # dummy message to feign success |
| } |
| |
| sub findinpath { |
| my $c; |
| my $e; |
| my $x=''; |
| $x='.exe' if ($^O eq 'MSWin32'); |
| my $s=':'; |
| $s=';' if ($^O eq 'MSWin32'); |
| my $p=$ENV{'PATH'}; |
| my @pa = split($s, $p); |
| for $c (@_) { |
| for $e (@pa) { |
| if( -x "$e/$c$x") { |
| return $c; |
| } |
| } |
| } |
| } |
| |
| my $make = findinpath("gmake", "make", "nmake"); |
| if(!$make) { |
| mydie "Couldn't find make in the PATH"; |
| } |
| logit "going with $make as make"; |
| |
| # change to build dir |
| chdir "$pwd/$build"; |
| |
| if ($configurebuild) { |
| # run configure script |
| print `../$CURLDIR/configure $confopts 2>&1`; |
| |
| if (-f "lib/Makefile") { |
| logit "configure seems to have finished fine"; |
| } else { |
| mydie "configure didn't work"; |
| } |
| } else { |
| if (($^O eq 'MSWin32') && ($targetos !~ /netware/)) { |
| system("xcopy /s /q ..\\$CURLDIR ."); |
| system("buildconf.bat"); |
| } |
| elsif (($^O eq 'linux') || ($targetos =~ /netware/)) { |
| system("cp -afr ../$CURLDIR/* ."); |
| system("cp -af ../$CURLDIR/Makefile.dist Makefile"); |
| system("$make -i -C lib -f Makefile.$targetos prebuild"); |
| system("$make -i -C src -f Makefile.$targetos prebuild"); |
| } |
| } |
| |
| logit "display lib/config$confsuffix.h"; |
| open(F, "lib/config$confsuffix.h") or die "lib/config$confsuffix.h: $!"; |
| while (<F>) { |
| print if /^ *#/; |
| } |
| close(F); |
| |
| if (grepfile("define USE_ARES", "lib/config$confsuffix.h")) { |
| logit "setup to build ares"; |
| |
| logit "display ares/config$confsuffix.h"; |
| if(open(F, "ares/config$confsuffix.h")) { |
| while (<F>) { |
| print if /^ *#/; |
| } |
| close(F); |
| } |
| |
| logit "build ares"; |
| chdir "ares"; |
| |
| if ($targetos && !$configurebuild) { |
| logit "$make -f Makefile.$targetos"; |
| open(F, "$make -f Makefile.$targetos 2>&1 |") or die; |
| } |
| else { |
| logit "$make"; |
| open(F, "$make 2>&1 |") or die; |
| } |
| while (<F>) { |
| s/$pwd//g; |
| print; |
| } |
| close(F); |
| |
| if (-f "libcares$libext") { |
| logit "ares is now built successfully (libcares$libext)"; |
| } else { |
| logit "ares build failed (libares$libext)"; |
| } |
| |
| # cd back to the curl build dir |
| chdir "$pwd/$build"; |
| } |
| |
| if ($configurebuild) { |
| logit "$make -i"; |
| open(F, "$make -i 2>&1 |") or die; |
| while (<F>) { |
| s/$pwd//g; |
| print; |
| } |
| close(F); |
| } |
| else { |
| logit "$make -i $targetos"; |
| if ($^O eq 'MSWin32') { |
| if ($targetos =~ /vc/) { |
| open(F, "nmake -i $targetos|") or die; |
| } |
| else { |
| open(F, "$make -i $targetos |") or die; |
| } |
| } |
| else { |
| open(F, "$make -i $targetos 2>&1 |") or die; |
| } |
| while (<F>) { |
| s/$pwd//g; |
| print; |
| } |
| close(F); |
| } |
| |
| if (-f "lib/libcurl$libext") { |
| logit "lib/libcurl was created fine (libcurl$libext)"; |
| } |
| else { |
| logit "lib/libcurl was not created (libcurl$libext)"; |
| } |
| |
| if (-f "src/curl$binext") { |
| logit "src/curl was created fine (curl$binext)"; |
| } |
| else { |
| mydie "src/curl was not created (curl$binext)"; |
| } |
| |
| if ($targetos =~ /netware/) { |
| if (-f '../../curlver') { |
| system('../../curlver'); |
| } |
| } |
| elsif(!$crosscompile) { |
| logit "display curl$binext --version output"; |
| open(F, "./src/curl$binext --version|"); |
| while(<F>) { |
| print; |
| print LOG; |
| } |
| close(F); |
| } |
| |
| if ($configurebuild && !$crosscompile) { |
| my $o; |
| if($runtestopts) { |
| $o = "TEST_F=\"$runtestopts\" "; |
| } |
| logit "$make -k ${o}test-full"; |
| open(F, "$make -k ${o}test-full 2>&1 |") or die; |
| open(LOG, ">$buildlog") or die; |
| while (<F>) { |
| s/$pwd//g; |
| print; |
| print LOG; |
| } |
| close(F); |
| close(LOG); |
| |
| if (grepfile("^TEST", $buildlog)) { |
| logit "tests were run"; |
| } else { |
| mydie "test suite failure"; |
| } |
| |
| if (grepfile("^TESTFAIL:", $buildlog)) { |
| logit "the tests were not successful"; |
| } else { |
| logit "the tests were successful!"; |
| } |
| } else { |
| # dummy message to feign success |
| if($crosscompile) { |
| logit "cross-compiling, can't run tests"; |
| } |
| print "TESTDONE: 1 tests out of 0 (dummy message)\n"; |
| } |
| |
| # create a tarball if we got that option. |
| if (($mktarball ne '') && (-f $mktarball)) { |
| system($mktarball); |
| } |
| |
| # mydie to cleanup |
| mydie "ending nicely"; |