| /***************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al. |
| * |
| * In order to be useful for every potential user, curl and libcurl are |
| * dual-licensed under the MPL and the MIT/X-derivate licenses. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the MPL or the MIT/X-derivate |
| * licenses. You may pick one of these licenses. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| * $Id$ |
| *****************************************************************************/ |
| |
| #include "setup.h" |
| |
| /* -- WIN32 approved -- */ |
| #include <stdio.h> |
| #include <string.h> |
| #include <stdarg.h> |
| #include <stdlib.h> |
| #include <ctype.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| |
| #include <errno.h> |
| |
| #if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__) |
| #include <winsock.h> |
| #include <time.h> |
| #include <io.h> |
| #else |
| #ifdef HAVE_SYS_SOCKET_H |
| #include <sys/socket.h> |
| #endif |
| #ifdef HAVE_NETINET_IN_H |
| #include <netinet/in.h> |
| #endif |
| #include <sys/time.h> |
| |
| #ifdef HAVE_TIME_H |
| #ifdef TIME_WITH_SYS_TIME |
| #include <time.h> |
| #endif |
| #endif |
| |
| #include <sys/resource.h> |
| #ifdef HAVE_UNISTD_H |
| #include <unistd.h> |
| #endif |
| #include <netdb.h> |
| #ifdef HAVE_ARPA_INET_H |
| #include <arpa/inet.h> |
| #endif |
| #ifdef HAVE_NET_IF_H |
| #include <net/if.h> |
| #endif |
| #include <sys/ioctl.h> |
| #include <signal.h> |
| |
| #ifdef HAVE_SYS_PARAM_H |
| #include <sys/param.h> |
| #endif |
| |
| #ifdef HAVE_SYS_SELECT_H |
| #include <sys/select.h> |
| #endif |
| |
| |
| #endif |
| |
| #include "urldata.h" |
| #include <curl/curl.h> |
| #include "transfer.h" |
| #include "sendf.h" |
| #include "formdata.h" |
| #include "progress.h" |
| #include "base64.h" |
| #include "cookie.h" |
| #include "strequal.h" |
| #include "ssluse.h" |
| |
| #define _MPRINTF_REPLACE /* use our functions only */ |
| #include <curl/mprintf.h> |
| |
| /* The last #include file should be: */ |
| #ifdef MALLOCDEBUG |
| #include "memdebug.h" |
| #endif |
| |
| /* ------------------------------------------------------------------------- */ |
| /* |
| * The add_buffer series of functions are used to build one large memory chunk |
| * from repeated function invokes. Used so that the entire HTTP request can |
| * be sent in one go. |
| */ |
| static CURLcode |
| add_buffer(send_buffer *in, const void *inptr, size_t size); |
| |
| /* |
| * add_buffer_init() returns a fine buffer struct |
| */ |
| static |
| send_buffer *add_buffer_init(void) |
| { |
| send_buffer *blonk; |
| blonk=(send_buffer *)malloc(sizeof(send_buffer)); |
| if(blonk) { |
| memset(blonk, 0, sizeof(send_buffer)); |
| return blonk; |
| } |
| return NULL; /* failed, go home */ |
| } |
| |
| /* |
| * add_buffer_send() sends a buffer and frees all associated memory. |
| */ |
| static |
| size_t add_buffer_send(int sockfd, struct connectdata *conn, send_buffer *in) |
| { |
| size_t amount; |
| if(conn->data->set.verbose) { |
| fputs("> ", conn->data->set.err); |
| /* this data _may_ contain binary stuff */ |
| fwrite(in->buffer, in->size_used, 1, conn->data->set.err); |
| } |
| |
| Curl_write(conn, sockfd, in->buffer, in->size_used, &amount); |
| |
| if(in->buffer) |
| free(in->buffer); |
| free(in); |
| |
| return amount; |
| } |
| |
| |
| /* |
| * add_bufferf() builds a buffer from the formatted input |
| */ |
| static |
| CURLcode add_bufferf(send_buffer *in, const char *fmt, ...) |
| { |
| CURLcode result = CURLE_OUT_OF_MEMORY; |
| char *s; |
| va_list ap; |
| va_start(ap, fmt); |
| s = vaprintf(fmt, ap); /* this allocs a new string to append */ |
| va_end(ap); |
| |
| if(s) { |
| result = add_buffer(in, s, strlen(s)); |
| free(s); |
| } |
| return result; |
| } |
| |
| /* |
| * add_buffer() appends a memory chunk to the existing one |
| */ |
| static |
| CURLcode add_buffer(send_buffer *in, const void *inptr, size_t size) |
| { |
| char *new_rb; |
| int new_size; |
| |
| if(!in->buffer || |
| ((in->size_used + size) > (in->size_max - 1))) { |
| new_size = (in->size_used+size)*2; |
| if(in->buffer) |
| /* we have a buffer, enlarge the existing one */ |
| new_rb = (char *)realloc(in->buffer, new_size); |
| else |
| /* create a new buffer */ |
| new_rb = (char *)malloc(new_size); |
| |
| if(!new_rb) |
| return CURLE_OUT_OF_MEMORY; |
| |
| in->buffer = new_rb; |
| in->size_max = new_size; |
| } |
| memcpy(&in->buffer[in->size_used], inptr, size); |
| |
| in->size_used += size; |
| |
| return CURLE_OK; |
| } |
| |
| /* end of the add_buffer functions */ |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * Read everything until a newline. |
| */ |
| |
| static |
| int GetLine(int sockfd, char *ptr, struct connectdata *conn) |
| { |
| ssize_t nread; |
| |
| /* get us a full line, terminated with a newline */ |
| for(nread=0; (nread<BUFSIZE); nread++, ptr++) { |
| if((CURLE_OK != Curl_read(conn, sockfd, ptr, 1, &nread)) || |
| (nread <= 0) || (*ptr == '\n')) |
| break; |
| } |
| *ptr=0; /* zero terminate */ |
| |
| return nread>0?nread:0; |
| } |
| |
| |
| |
| /* |
| * This function checks the linked list of custom HTTP headers for a particular |
| * header (prefix). |
| */ |
| static bool checkheaders(struct SessionHandle *data, const char *thisheader) |
| { |
| struct curl_slist *head; |
| size_t thislen = strlen(thisheader); |
| |
| for(head = data->set.headers; head; head=head->next) { |
| if(strnequal(head->data, thisheader, thislen)) { |
| return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| /* |
| * ConnectHTTPProxyTunnel() requires that we're connected to a HTTP proxy. This |
| * function will issue the necessary commands to get a seamless tunnel through |
| * this proxy. After that, the socket can be used just as a normal socket. |
| */ |
| |
| CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn, |
| int tunnelsocket, |
| char *hostname, int remote_port) |
| { |
| int httperror=0; |
| int subversion=0; |
| struct SessionHandle *data=conn->data; |
| |
| infof(data, "Establish HTTP proxy tunnel to %s:%d\n", hostname, remote_port); |
| |
| /* OK, now send the connect request to the proxy */ |
| Curl_sendf(tunnelsocket, conn, |
| "CONNECT %s:%d HTTP/1.0\015\012" |
| "%s" |
| "%s" |
| "\r\n", |
| hostname, remote_port, |
| (conn->bits.proxy_user_passwd)?conn->allocptr.proxyuserpwd:"", |
| (data->set.useragent?conn->allocptr.uagent:"") |
| ); |
| |
| /* wait for the proxy to send us a HTTP/1.0 200 OK header */ |
| while(GetLine(tunnelsocket, data->state.buffer, conn)) { |
| if('\r' == data->state.buffer[0]) |
| break; /* end of headers */ |
| if(data->set.verbose) |
| fprintf(data->set.err, "< %s\n", data->state.buffer); |
| |
| if(2 == sscanf(data->state.buffer, "HTTP/1.%d %d", |
| &subversion, |
| &httperror)) { |
| ; |
| } |
| } |
| if(200 != httperror) { |
| if(407 == httperror) |
| /* Added Nov 6 1998 */ |
| failf(data, "Proxy requires authorization!"); |
| else |
| failf(data, "Received error code %d from proxy", httperror); |
| return CURLE_READ_ERROR; |
| } |
| |
| infof (data, "Proxy replied to CONNECT request\n"); |
| return CURLE_OK; |
| } |
| |
| /* |
| * HTTP stuff to do at connect-time. |
| */ |
| CURLcode Curl_http_connect(struct connectdata *conn) |
| { |
| struct SessionHandle *data; |
| CURLcode result; |
| |
| data=conn->data; |
| |
| /* If we are not using a proxy and we want a secure connection, |
| * perform SSL initialization & connection now. |
| * If using a proxy with https, then we must tell the proxy to CONNECT |
| * us to the host we want to talk to. Only after the connect |
| * has occured, can we start talking SSL |
| */ |
| if (conn->protocol & PROT_HTTPS) { |
| if (data->change.proxy) { |
| /* HTTPS through a proxy can only be done with a tunnel */ |
| result = Curl_ConnectHTTPProxyTunnel(conn, conn->firstsocket, |
| conn->hostname, conn->remote_port); |
| if(CURLE_OK != result) |
| return result; |
| } |
| |
| /* now, perform the SSL initialization for this socket */ |
| result = Curl_SSLConnect(conn); |
| if(result) |
| return result; |
| } |
| |
| if(conn->bits.user_passwd && !data->state.this_is_a_follow) { |
| /* Authorization: is requested, this is not a followed location, get the |
| original host name */ |
| data->state.auth_host = strdup(conn->hostname); |
| } |
| |
| return CURLE_OK; |
| } |
| |
| CURLcode Curl_http_done(struct connectdata *conn) |
| { |
| struct SessionHandle *data; |
| long *bytecount = &conn->bytecount; |
| struct HTTP *http; |
| |
| data=conn->data; |
| http=conn->proto.http; |
| |
| if(HTTPREQ_POST_FORM == data->set.httpreq) { |
| *bytecount = http->readbytecount + http->writebytecount; |
| |
| Curl_formclean(http->sendit); /* Now free that whole lot */ |
| |
| data->set.fread = http->storefread; /* restore */ |
| data->set.in = http->in; /* restore */ |
| } |
| else if(HTTPREQ_PUT == data->set.httpreq) { |
| *bytecount = http->readbytecount + http->writebytecount; |
| } |
| |
| return CURLE_OK; |
| } |
| |
| |
| CURLcode Curl_http(struct connectdata *conn) |
| { |
| struct SessionHandle *data=conn->data; |
| char *buf = data->state.buffer; /* this is a short cut to the buffer */ |
| CURLcode result=CURLE_OK; |
| struct HTTP *http; |
| struct Cookie *co=NULL; /* no cookies from start */ |
| char *ppath = conn->ppath; /* three previous function arguments */ |
| char *host = conn->name; |
| long *bytecount = &conn->bytecount; |
| |
| if(!conn->proto.http) { |
| /* Only allocate this struct if we don't already have it! */ |
| |
| http = (struct HTTP *)malloc(sizeof(struct HTTP)); |
| if(!http) |
| return CURLE_OUT_OF_MEMORY; |
| memset(http, 0, sizeof(struct HTTP)); |
| conn->proto.http = http; |
| } |
| else |
| http = conn->proto.http; |
| |
| /* We default to persistant connections */ |
| conn->bits.close = FALSE; |
| |
| if ( (conn->protocol&(PROT_HTTP|PROT_FTP)) && |
| data->set.upload) { |
| data->set.httpreq = HTTPREQ_PUT; |
| } |
| |
| /* The User-Agent string has been built in url.c already, because it might |
| have been used in the proxy connect, but if we have got a header with |
| the user-agent string specified, we erase the previously made string |
| here. */ |
| if(checkheaders(data, "User-Agent:") && conn->allocptr.uagent) { |
| free(conn->allocptr.uagent); |
| conn->allocptr.uagent=NULL; |
| } |
| |
| if((conn->bits.user_passwd) && !checkheaders(data, "Authorization:")) { |
| char *authorization; |
| |
| /* To prevent the user+password to get sent to other than the original |
| host due to a location-follow, we do some weirdo checks here */ |
| if(!data->state.this_is_a_follow || |
| !data->state.auth_host || |
| strequal(data->state.auth_host, conn->hostname)) { |
| sprintf(data->state.buffer, "%s:%s", |
| data->state.user, data->state.passwd); |
| if(Curl_base64_encode(data->state.buffer, strlen(data->state.buffer), |
| &authorization) >= 0) { |
| if(conn->allocptr.userpwd) |
| free(conn->allocptr.userpwd); |
| conn->allocptr.userpwd = aprintf( "Authorization: Basic %s\015\012", |
| authorization); |
| free(authorization); |
| } |
| } |
| } |
| if((data->change.referer) && !checkheaders(data, "Referer:")) { |
| if(conn->allocptr.ref) |
| free(conn->allocptr.ref); |
| conn->allocptr.ref = aprintf("Referer: %s\015\012", data->change.referer); |
| } |
| if(data->set.cookie && !checkheaders(data, "Cookie:")) { |
| if(conn->allocptr.cookie) |
| free(conn->allocptr.cookie); |
| conn->allocptr.cookie = aprintf("Cookie: %s\015\012", data->set.cookie); |
| } |
| |
| if(data->cookies) { |
| co = Curl_cookie_getlist(data->cookies, |
| host, ppath, |
| conn->protocol&PROT_HTTPS?TRUE:FALSE); |
| } |
| if ((data->change.proxy) && !(conn->protocol&PROT_HTTPS)) { |
| /* The path sent to the proxy is in fact the entire URL */ |
| ppath = data->change.url; |
| } |
| if(HTTPREQ_POST_FORM == data->set.httpreq) { |
| /* we must build the whole darned post sequence first, so that we have |
| a size of the whole shebang before we start to send it */ |
| http->sendit = Curl_getFormData(data->set.httppost, &http->postsize); |
| } |
| |
| if(!checkheaders(data, "Host:")) { |
| /* if ptr_host is already set, it is almost OK since we only re-use |
| connections to the very same host and port, but when we use a HTTP |
| proxy we have a persistant connect and yet we must change the Host: |
| header! */ |
| |
| if(conn->allocptr.host) |
| free(conn->allocptr.host); |
| |
| if(((conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTPS)) || |
| (!(conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTP)) ) |
| /* If (HTTPS on port 443) OR (non-HTTPS on port 80) then don't include |
| the port number in the host string */ |
| conn->allocptr.host = aprintf("Host: %s\r\n", host); |
| else |
| conn->allocptr.host = aprintf("Host: %s:%d\r\n", host, |
| conn->remote_port); |
| } |
| |
| if(!checkheaders(data, "Pragma:")) |
| http->p_pragma = "Pragma: no-cache\r\n"; |
| |
| if(!checkheaders(data, "Accept:")) |
| http->p_accept = "Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*\r\n"; |
| |
| if(( (HTTPREQ_POST == data->set.httpreq) || |
| (HTTPREQ_POST_FORM == data->set.httpreq) || |
| (HTTPREQ_PUT == data->set.httpreq) ) && |
| conn->resume_from) { |
| /********************************************************************** |
| * Resuming upload in HTTP means that we PUT or POST and that we have |
| * got a resume_from value set. The resume value has already created |
| * a Range: header that will be passed along. We need to "fast forward" |
| * the file the given number of bytes and decrease the assume upload |
| * file size before we continue this venture in the dark lands of HTTP. |
| *********************************************************************/ |
| |
| if(conn->resume_from < 0 ) { |
| /* |
| * This is meant to get the size of the present remote-file by itself. |
| * We don't support this now. Bail out! |
| */ |
| conn->resume_from = 0; |
| } |
| |
| if(conn->resume_from) { |
| /* do we still game? */ |
| int passed=0; |
| |
| /* Now, let's read off the proper amount of bytes from the |
| input. If we knew it was a proper file we could've just |
| fseek()ed but we only have a stream here */ |
| do { |
| int readthisamountnow = (conn->resume_from - passed); |
| int actuallyread; |
| |
| if(readthisamountnow > BUFSIZE) |
| readthisamountnow = BUFSIZE; |
| |
| actuallyread = |
| data->set.fread(data->state.buffer, 1, readthisamountnow, |
| data->set.in); |
| |
| passed += actuallyread; |
| if(actuallyread != readthisamountnow) { |
| failf(data, "Could only read %d bytes from the input\n", |
| passed); |
| return CURLE_READ_ERROR; |
| } |
| } while(passed != conn->resume_from); /* loop until done */ |
| |
| /* now, decrease the size of the read */ |
| if(data->set.infilesize>0) { |
| data->set.infilesize -= conn->resume_from; |
| |
| if(data->set.infilesize <= 0) { |
| failf(data, "File already completely uploaded\n"); |
| return CURLE_PARTIAL_FILE; |
| } |
| } |
| /* we've passed, proceed as normal */ |
| } |
| } |
| if(conn->bits.use_range) { |
| /* |
| * A range is selected. We use different headers whether we're downloading |
| * or uploading and we always let customized headers override our internal |
| * ones if any such are specified. |
| */ |
| if((data->set.httpreq == HTTPREQ_GET) && |
| !checkheaders(data, "Range:")) { |
| conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", conn->range); |
| } |
| else if((data->set.httpreq != HTTPREQ_GET) && |
| !checkheaders(data, "Content-Range:")) { |
| |
| if(conn->resume_from) { |
| /* This is because "resume" was selected */ |
| long total_expected_size= conn->resume_from + data->set.infilesize; |
| conn->allocptr.rangeline = aprintf("Content-Range: bytes %s%ld/%ld\r\n", |
| conn->range, total_expected_size-1, |
| total_expected_size); |
| } |
| else { |
| /* Range was selected and then we just pass the incoming range and |
| append total size */ |
| conn->allocptr.rangeline = aprintf("Content-Range: bytes %s/%d\r\n", |
| conn->range, data->set.infilesize); |
| } |
| } |
| } |
| |
| do { |
| send_buffer *req_buffer; |
| struct curl_slist *headers=data->set.headers; |
| |
| /* initialize a dynamic send-buffer */ |
| req_buffer = add_buffer_init(); |
| |
| /* add the main request stuff */ |
| add_bufferf(req_buffer, |
| "%s " /* GET/HEAD/POST/PUT */ |
| "%s HTTP/1.1\r\n" /* path */ |
| "%s" /* proxyuserpwd */ |
| "%s" /* userpwd */ |
| "%s" /* range */ |
| "%s" /* user agent */ |
| "%s" /* cookie */ |
| "%s" /* host */ |
| "%s" /* pragma */ |
| "%s" /* accept */ |
| "%s", /* referer */ |
| |
| data->set.customrequest?data->set.customrequest: |
| (data->set.no_body?"HEAD": |
| ((HTTPREQ_POST == data->set.httpreq) || |
| (HTTPREQ_POST_FORM == data->set.httpreq))?"POST": |
| (HTTPREQ_PUT == data->set.httpreq)?"PUT":"GET"), |
| ppath, |
| (conn->bits.proxy_user_passwd && |
| conn->allocptr.proxyuserpwd)?conn->allocptr.proxyuserpwd:"", |
| (conn->bits.user_passwd && conn->allocptr.userpwd)? |
| conn->allocptr.userpwd:"", |
| (conn->bits.use_range && conn->allocptr.rangeline)? |
| conn->allocptr.rangeline:"", |
| (data->set.useragent && *data->set.useragent && conn->allocptr.uagent)? |
| conn->allocptr.uagent:"", |
| (conn->allocptr.cookie?conn->allocptr.cookie:""), /* Cookie: <data> */ |
| (conn->allocptr.host?conn->allocptr.host:""), /* Host: host */ |
| http->p_pragma?http->p_pragma:"", |
| http->p_accept?http->p_accept:"", |
| (data->change.referer && conn->allocptr.ref)?conn->allocptr.ref:"" /* Referer: <data> <CRLF> */ |
| ); |
| |
| if(co) { |
| int count=0; |
| struct Cookie *store=co; |
| /* now loop through all cookies that matched */ |
| while(co) { |
| if(co->value && strlen(co->value)) { |
| if(0 == count) { |
| add_bufferf(req_buffer, "Cookie: "); |
| } |
| add_bufferf(req_buffer, |
| "%s%s=%s", count?"; ":"", co->name, co->value); |
| count++; |
| } |
| co = co->next; /* next cookie please */ |
| } |
| if(count) { |
| add_buffer(req_buffer, "\r\n", 2); |
| } |
| Curl_cookie_freelist(store); /* free the cookie list */ |
| co=NULL; |
| } |
| |
| if(data->set.timecondition) { |
| struct tm *thistime; |
| |
| /* Phil Karn (Fri, 13 Apr 2001) pointed out that the If-Modified-Since |
| * header family should have their times set in GMT as RFC2616 defines: |
| * "All HTTP date/time stamps MUST be represented in Greenwich Mean Time |
| * (GMT), without exception. For the purposes of HTTP, GMT is exactly |
| * equal to UTC (Coordinated Universal Time)." (see page 20 of RFC2616). |
| */ |
| |
| #ifdef HAVE_LOCALTIME_R |
| /* thread-safe version */ |
| /* We assume that the presense of localtime_r() proves the presense |
| of gmtime_r() which is a bit ugly but might work */ |
| struct tm keeptime; |
| thistime = (struct tm *)gmtime_r(&data->set.timevalue, &keeptime); |
| #else |
| thistime = gmtime(&data->set.timevalue); |
| #endif |
| if(NULL == thistime) { |
| failf(data, "localtime() failed!"); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| #ifdef HAVE_STRFTIME |
| /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */ |
| strftime(buf, BUFSIZE-1, "%a, %d %b %Y %H:%M:%S %Z", thistime); |
| #else |
| /* TODO: Right, we *could* write a replacement here */ |
| strcpy(buf, "no strftime() support"); |
| #endif |
| switch(data->set.timecondition) { |
| case TIMECOND_IFMODSINCE: |
| default: |
| add_bufferf(req_buffer, |
| "If-Modified-Since: %s\r\n", buf); |
| break; |
| case TIMECOND_IFUNMODSINCE: |
| add_bufferf(req_buffer, |
| "If-Unmodified-Since: %s\r\n", buf); |
| break; |
| case TIMECOND_LASTMOD: |
| add_bufferf(req_buffer, |
| "Last-Modified: %s\r\n", buf); |
| break; |
| } |
| } |
| |
| while(headers) { |
| char *ptr = strchr(headers->data, ':'); |
| if(ptr) { |
| /* we require a colon for this to be a true header */ |
| |
| ptr++; /* pass the colon */ |
| while(*ptr && isspace((int)*ptr)) |
| ptr++; |
| |
| if(*ptr) { |
| /* only send this if the contents was non-blank */ |
| |
| add_bufferf(req_buffer, "%s\r\n", headers->data); |
| } |
| } |
| headers = headers->next; |
| } |
| |
| if(HTTPREQ_POST_FORM == data->set.httpreq) { |
| char contentType[256]; |
| int linelength=0; |
| if(Curl_FormInit(&http->form, http->sendit)) { |
| failf(data, "Internal HTTP POST error!\n"); |
| return CURLE_HTTP_POST_ERROR; |
| } |
| |
| http->storefread = data->set.fread; /* backup */ |
| http->in = data->set.in; /* backup */ |
| |
| data->set.fread = (curl_read_callback) |
| Curl_FormReader; /* set the read function to read from the |
| generated form data */ |
| data->set.in = (FILE *)&http->form; |
| |
| add_bufferf(req_buffer, |
| "Content-Length: %d\r\n", http->postsize-2); |
| |
| if(!checkheaders(data, "Expect:")) { |
| /* if not disabled explicitly we add a Expect: 100-continue |
| to the headers which actually speeds up post operations (as |
| there is one packet coming back from the web server) */ |
| add_bufferf(req_buffer, |
| "Expect: 100-continue\r\n"); |
| data->set.expect100header = TRUE; |
| |
| /* Get Content-Type: line from Curl_FormReadOneLine, which happens |
| to always be the first line. We can know this for sure since |
| we always build the formpost linked list the same way! */ |
| linelength = Curl_FormReadOneLine (contentType, |
| sizeof(contentType), |
| 1, |
| (FILE *)&http->form); |
| if(linelength == -1) { |
| failf(data, "Could not get Content-Type header line!\n"); |
| return CURLE_HTTP_POST_ERROR; |
| } |
| add_buffer(req_buffer, contentType, linelength); |
| } |
| |
| /* set upload size to the progress meter */ |
| Curl_pgrsSetUploadSize(data, http->postsize); |
| |
| /* fire away the whole request to the server */ |
| data->info.request_size = |
| add_buffer_send(conn->firstsocket, conn, req_buffer); |
| |
| /* setup variables for the upcoming transfer */ |
| result = Curl_Transfer(conn, conn->firstsocket, -1, TRUE, |
| &http->readbytecount, |
| conn->firstsocket, |
| &http->writebytecount); |
| if(result) { |
| Curl_formclean(http->sendit); /* free that whole lot */ |
| return result; |
| } |
| } |
| else if(HTTPREQ_PUT == data->set.httpreq) { |
| /* Let's PUT the data to the server! */ |
| |
| if(data->set.infilesize>0) { |
| add_bufferf(req_buffer, |
| "Content-Length: %d\r\n\r\n", /* file size */ |
| data->set.infilesize ); |
| } |
| else |
| add_bufferf(req_buffer, "\015\012"); |
| |
| /* set the upload size to the progress meter */ |
| Curl_pgrsSetUploadSize(data, data->set.infilesize); |
| |
| /* this sends the buffer and frees all the buffer resources */ |
| data->info.request_size = |
| add_buffer_send(conn->firstsocket, conn, req_buffer); |
| |
| /* prepare for transfer */ |
| result = Curl_Transfer(conn, conn->firstsocket, -1, TRUE, |
| &http->readbytecount, |
| conn->firstsocket, |
| &http->writebytecount); |
| if(result) |
| return result; |
| |
| } |
| else { |
| if(HTTPREQ_POST == data->set.httpreq) { |
| /* this is the simple POST, using x-www-form-urlencoded style */ |
| |
| if(!data->set.postfields) { |
| /* |
| * This is an attempt to do a POST without having anything to |
| * actually send. Let's make a NULL pointer equal "" here. Good/bad |
| * ? |
| */ |
| data->set.postfields = (char *)""; |
| data->set.postfieldsize = 0; /* it might been set to something illegal, |
| anything > 0 would be! */ |
| } |
| |
| if(!checkheaders(data, "Content-Length:")) |
| /* we allow replacing this header, although it isn't very wise to |
| actually set your own */ |
| add_bufferf(req_buffer, |
| "Content-Length: %d\r\n", |
| (data->set.postfieldsize?data->set.postfieldsize: |
| strlen(data->set.postfields)) ); |
| |
| if(!checkheaders(data, "Content-Type:")) |
| add_bufferf(req_buffer, |
| "Content-Type: application/x-www-form-urlencoded\r\n"); |
| |
| /* and here comes the actual data */ |
| if(data->set.postfieldsize) { |
| add_buffer(req_buffer, "\r\n", 2); |
| add_buffer(req_buffer, data->set.postfields, |
| data->set.postfieldsize); |
| add_buffer(req_buffer, "\r\n", 2); |
| } |
| else { |
| add_bufferf(req_buffer, |
| "\r\n" |
| "%s\r\n", |
| data->set.postfields ); |
| } |
| } |
| else |
| add_buffer(req_buffer, "\r\n", 2); |
| |
| /* issue the request */ |
| data->info.request_size = |
| add_buffer_send(conn->firstsocket, conn, req_buffer); |
| |
| /* HTTP GET/HEAD download: */ |
| result = Curl_Transfer(conn, conn->firstsocket, -1, TRUE, bytecount, |
| -1, NULL); /* nothing to upload */ |
| } |
| if(result) |
| return result; |
| } while (0); /* this is just a left-over from the multiple document download |
| attempts */ |
| |
| return CURLE_OK; |
| } |
| |
| |
| /* |
| * local variables: |
| * eval: (load-file "../curl-mode.el") |
| * end: |
| * vim600: et sw=2 ts=2 sts=2 tw=78 fdm=marker |
| * vim<600: et sw=2 ts=2 sts=2 tw=78 |
| */ |
