| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at http://curl.haxx.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| * $Id$ |
| ***************************************************************************/ |
| |
| #include "setup.h" |
| |
| #ifndef CURL_DISABLE_HTTP |
| /* -- WIN32 approved -- */ |
| #include <stdio.h> |
| #include <string.h> |
| #include <stdarg.h> |
| #include <stdlib.h> |
| #include <ctype.h> |
| |
| #ifdef WIN32 |
| #include <time.h> |
| #include <io.h> |
| #else |
| #ifdef HAVE_SYS_SOCKET_H |
| #include <sys/socket.h> |
| #endif |
| #ifdef HAVE_NETINET_IN_H |
| #include <netinet/in.h> |
| #endif |
| #ifdef HAVE_SYS_TIME_H |
| #include <sys/time.h> |
| #endif |
| |
| #ifdef HAVE_TIME_H |
| #ifdef TIME_WITH_SYS_TIME |
| #include <time.h> |
| #endif |
| #endif |
| |
| #ifdef HAVE_UNISTD_H |
| #include <unistd.h> |
| #endif |
| #ifdef HAVE_NETDB_H |
| #include <netdb.h> |
| #endif |
| #ifdef HAVE_ARPA_INET_H |
| #include <arpa/inet.h> |
| #endif |
| #ifdef HAVE_NET_IF_H |
| #include <net/if.h> |
| #endif |
| #ifdef HAVE_SYS_IOCTL_H |
| #include <sys/ioctl.h> |
| #endif |
| |
| #ifdef HAVE_SYS_PARAM_H |
| #include <sys/param.h> |
| #endif |
| |
| #endif |
| |
| #include "urldata.h" |
| #include <curl/curl.h> |
| #include "transfer.h" |
| #include "sendf.h" |
| #include "easyif.h" /* for Curl_convert_... prototypes */ |
| #include "formdata.h" |
| #include "progress.h" |
| #include "curl_base64.h" |
| #include "cookie.h" |
| #include "strequal.h" |
| #include "sslgen.h" |
| #include "http_digest.h" |
| #include "http_ntlm.h" |
| #include "http_negotiate.h" |
| #include "url.h" |
| #include "share.h" |
| #include "hostip.h" |
| #include "http.h" |
| #include "curl_memory.h" |
| #include "select.h" |
| #include "parsedate.h" /* for the week day and month names */ |
| #include "strtoofft.h" |
| #include "multiif.h" |
| #include "rawstr.h" |
| #include "content_encoding.h" |
| |
| #define _MPRINTF_REPLACE /* use our functions only */ |
| #include <curl/mprintf.h> |
| |
| /* The last #include file should be: */ |
| #include "memdebug.h" |
| |
| /* Default proxy timeout in milliseconds */ |
| #define PROXY_TIMEOUT (3600*1000) |
| |
| /* |
| * Forward declarations. |
| */ |
| |
| static int http_getsock_do(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks); |
| #ifdef USE_SSL |
| static CURLcode https_connecting(struct connectdata *conn, bool *done); |
| static int https_getsock(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks); |
| #else |
| #define https_connecting(x,y) CURLE_COULDNT_CONNECT |
| #endif |
| |
| /* |
| * HTTP handler interface. |
| */ |
| const struct Curl_handler Curl_handler_http = { |
| "HTTP", /* scheme */ |
| ZERO_NULL, /* setup_connection */ |
| Curl_http, /* do_it */ |
| Curl_http_done, /* done */ |
| ZERO_NULL, /* do_more */ |
| Curl_http_connect, /* connect_it */ |
| ZERO_NULL, /* connecting */ |
| ZERO_NULL, /* doing */ |
| ZERO_NULL, /* proto_getsock */ |
| http_getsock_do, /* doing_getsock */ |
| ZERO_NULL, /* perform_getsock */ |
| ZERO_NULL, /* disconnect */ |
| PORT_HTTP, /* defport */ |
| PROT_HTTP, /* protocol */ |
| }; |
| |
| #ifdef USE_SSL |
| /* |
| * HTTPS handler interface. |
| */ |
| const struct Curl_handler Curl_handler_https = { |
| "HTTPS", /* scheme */ |
| ZERO_NULL, /* setup_connection */ |
| Curl_http, /* do_it */ |
| Curl_http_done, /* done */ |
| ZERO_NULL, /* do_more */ |
| Curl_http_connect, /* connect_it */ |
| https_connecting, /* connecting */ |
| ZERO_NULL, /* doing */ |
| https_getsock, /* proto_getsock */ |
| http_getsock_do, /* doing_getsock */ |
| ZERO_NULL, /* perform_getsock */ |
| ZERO_NULL, /* disconnect */ |
| PORT_HTTPS, /* defport */ |
| PROT_HTTP | PROT_HTTPS | PROT_SSL /* protocol */ |
| }; |
| #endif |
| |
| |
| /* |
| * checkheaders() checks the linked list of custom HTTP headers for a |
| * particular header (prefix). |
| * |
| * Returns a pointer to the first matching header or NULL if none matched. |
| */ |
| static char *checkheaders(struct SessionHandle *data, const char *thisheader) |
| { |
| struct curl_slist *head; |
| size_t thislen = strlen(thisheader); |
| |
| for(head = data->set.headers; head; head=head->next) { |
| if(Curl_raw_nequal(head->data, thisheader, thislen)) |
| return head->data; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Strip off leading and trailing whitespace from the value in the |
| * given HTTP header line and return a strdupped copy. Returns NULL in |
| * case of allocation failure. Returns an empty string if the header value |
| * consists entirely of whitespace. |
| */ |
| char *Curl_copy_header_value(const char *h) |
| { |
| const char *start; |
| const char *end; |
| char *value; |
| size_t len; |
| |
| DEBUGASSERT(h); |
| |
| /* Find the end of the header name */ |
| while (*h && (*h != ':')) |
| ++h; |
| |
| if (*h) |
| /* Skip over colon */ |
| ++h; |
| |
| /* Find the first non-space letter */ |
| start = h; |
| while(*start && ISSPACE(*start)) |
| start++; |
| |
| /* data is in the host encoding so |
| use '\r' and '\n' instead of 0x0d and 0x0a */ |
| end = strchr(start, '\r'); |
| if(!end) |
| end = strchr(start, '\n'); |
| if(!end) |
| end = strchr(start, '\0'); |
| if(!end) |
| return NULL; |
| |
| /* skip all trailing space letters */ |
| while((end > start) && ISSPACE(*end)) |
| end--; |
| |
| /* get length of the type */ |
| len = end-start+1; |
| |
| value = malloc(len + 1); |
| if(!value) |
| return NULL; |
| |
| memcpy(value, start, len); |
| value[len] = 0; /* zero terminate */ |
| |
| return value; |
| } |
| |
| /* |
| * http_output_basic() sets up an Authorization: header (or the proxy version) |
| * for HTTP Basic authentication. |
| * |
| * Returns CURLcode. |
| */ |
| static CURLcode http_output_basic(struct connectdata *conn, bool proxy) |
| { |
| char *authorization; |
| struct SessionHandle *data=conn->data; |
| char **userp; |
| const char *user; |
| const char *pwd; |
| |
| if(proxy) { |
| userp = &conn->allocptr.proxyuserpwd; |
| user = conn->proxyuser; |
| pwd = conn->proxypasswd; |
| } |
| else { |
| userp = &conn->allocptr.userpwd; |
| user = conn->user; |
| pwd = conn->passwd; |
| } |
| |
| snprintf(data->state.buffer, sizeof(data->state.buffer), "%s:%s", user, pwd); |
| if(Curl_base64_encode(data, data->state.buffer, |
| strlen(data->state.buffer), |
| &authorization) > 0) { |
| if(*userp) |
| free(*userp); |
| *userp = aprintf( "%sAuthorization: Basic %s\r\n", |
| proxy?"Proxy-":"", |
| authorization); |
| free(authorization); |
| if(!*userp) |
| return CURLE_OUT_OF_MEMORY; |
| } |
| else |
| return CURLE_OUT_OF_MEMORY; |
| return CURLE_OK; |
| } |
| |
| /* pickoneauth() selects the most favourable authentication method from the |
| * ones available and the ones we want. |
| * |
| * return TRUE if one was picked |
| */ |
| static bool pickoneauth(struct auth *pick) |
| { |
| bool picked; |
| /* only deal with authentication we want */ |
| long avail = pick->avail & pick->want; |
| picked = TRUE; |
| |
| /* The order of these checks is highly relevant, as this will be the order |
| of preference in case of the existence of multiple accepted types. */ |
| if(avail & CURLAUTH_GSSNEGOTIATE) |
| pick->picked = CURLAUTH_GSSNEGOTIATE; |
| else if(avail & CURLAUTH_DIGEST) |
| pick->picked = CURLAUTH_DIGEST; |
| else if(avail & CURLAUTH_NTLM) |
| pick->picked = CURLAUTH_NTLM; |
| else if(avail & CURLAUTH_BASIC) |
| pick->picked = CURLAUTH_BASIC; |
| else { |
| pick->picked = CURLAUTH_PICKNONE; /* we select to use nothing */ |
| picked = FALSE; |
| } |
| pick->avail = CURLAUTH_NONE; /* clear it here */ |
| |
| return picked; |
| } |
| |
| /* |
| * Curl_http_perhapsrewind() |
| * |
| * If we are doing POST or PUT { |
| * If we have more data to send { |
| * If we are doing NTLM { |
| * Keep sending since we must not disconnect |
| * } |
| * else { |
| * If there is more than just a little data left to send, close |
| * the current connection by force. |
| * } |
| * } |
| * If we have sent any data { |
| * If we don't have track of all the data { |
| * call app to tell it to rewind |
| * } |
| * else { |
| * rewind internally so that the operation can restart fine |
| * } |
| * } |
| * } |
| */ |
| CURLcode Curl_http_perhapsrewind(struct connectdata *conn) |
| { |
| struct SessionHandle *data = conn->data; |
| struct HTTP *http = data->state.proto.http; |
| curl_off_t bytessent; |
| curl_off_t expectsend = -1; /* default is unknown */ |
| |
| if(!http || !(conn->protocol & PROT_HTTP)) |
| /* If this is still NULL, we have not reach very far and we can |
| safely skip this rewinding stuff, or this is attempted to get used |
| when HTTP isn't activated */ |
| return CURLE_OK; |
| |
| switch(data->set.httpreq) { |
| case HTTPREQ_GET: |
| case HTTPREQ_HEAD: |
| return CURLE_OK; |
| default: |
| break; |
| } |
| |
| bytessent = http->writebytecount; |
| |
| if(conn->bits.authneg) |
| /* This is a state where we are known to be negotiating and we don't send |
| any data then. */ |
| expectsend = 0; |
| else { |
| /* figure out how much data we are expected to send */ |
| switch(data->set.httpreq) { |
| case HTTPREQ_POST: |
| if(data->set.postfieldsize != -1) |
| expectsend = data->set.postfieldsize; |
| else if(data->set.postfields) |
| expectsend = (curl_off_t)strlen(data->set.postfields); |
| break; |
| case HTTPREQ_PUT: |
| if(data->set.infilesize != -1) |
| expectsend = data->set.infilesize; |
| break; |
| case HTTPREQ_POST_FORM: |
| expectsend = http->postsize; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| conn->bits.rewindaftersend = FALSE; /* default */ |
| |
| if((expectsend == -1) || (expectsend > bytessent)) { |
| /* There is still data left to send */ |
| if((data->state.authproxy.picked == CURLAUTH_NTLM) || |
| (data->state.authhost.picked == CURLAUTH_NTLM)) { |
| if(((expectsend - bytessent) < 2000) || |
| (conn->ntlm.state != NTLMSTATE_NONE)) { |
| /* The NTLM-negotiation has started *OR* there is just a little (<2K) |
| data left to send, keep on sending. */ |
| |
| /* rewind data when completely done sending! */ |
| if(!conn->bits.authneg) |
| conn->bits.rewindaftersend = TRUE; |
| |
| return CURLE_OK; |
| } |
| if(conn->bits.close) |
| /* this is already marked to get closed */ |
| return CURLE_OK; |
| |
| infof(data, "NTLM send, close instead of sending %" FORMAT_OFF_T |
| " bytes\n", (curl_off_t)(expectsend - bytessent)); |
| } |
| |
| /* This is not NTLM or NTLM with many bytes left to send: close |
| */ |
| conn->bits.close = TRUE; |
| data->req.size = 0; /* don't download any more than 0 bytes */ |
| |
| /* There still is data left to send, but this connection is marked for |
| closure so we can safely do the rewind right now */ |
| } |
| |
| if(bytessent) |
| /* we rewind now at once since if we already sent something */ |
| return Curl_readrewind(conn); |
| |
| return CURLE_OK; |
| } |
| |
| /* |
| * Curl_http_auth_act() gets called when all HTTP headers have been received |
| * and it checks what authentication methods that are available and decides |
| * which one (if any) to use. It will set 'newurl' if an auth method was |
| * picked. |
| */ |
| |
| CURLcode Curl_http_auth_act(struct connectdata *conn) |
| { |
| struct SessionHandle *data = conn->data; |
| bool pickhost = FALSE; |
| bool pickproxy = FALSE; |
| CURLcode code = CURLE_OK; |
| |
| if(100 <= data->req.httpcode && 199 >= data->req.httpcode) |
| /* this is a transient response code, ignore */ |
| return CURLE_OK; |
| |
| if(data->state.authproblem) |
| return data->set.http_fail_on_error?CURLE_HTTP_RETURNED_ERROR:CURLE_OK; |
| |
| if(conn->bits.user_passwd && |
| ((data->req.httpcode == 401) || |
| (conn->bits.authneg && data->req.httpcode < 300))) { |
| pickhost = pickoneauth(&data->state.authhost); |
| if(!pickhost) |
| data->state.authproblem = TRUE; |
| } |
| if(conn->bits.proxy_user_passwd && |
| ((data->req.httpcode == 407) || |
| (conn->bits.authneg && data->req.httpcode < 300))) { |
| pickproxy = pickoneauth(&data->state.authproxy); |
| if(!pickproxy) |
| data->state.authproblem = TRUE; |
| } |
| |
| if(pickhost || pickproxy) { |
| /* In case this is GSS auth, the newurl field is already allocated so |
| we must make sure to free it before allocating a new one. As figured |
| out in bug #2284386 */ |
| Curl_safefree(data->req.newurl); |
| data->req.newurl = strdup(data->change.url); /* clone URL */ |
| if(!data->req.newurl) |
| return CURLE_OUT_OF_MEMORY; |
| |
| if((data->set.httpreq != HTTPREQ_GET) && |
| (data->set.httpreq != HTTPREQ_HEAD) && |
| !conn->bits.rewindaftersend) { |
| code = Curl_http_perhapsrewind(conn); |
| if(code) |
| return code; |
| } |
| } |
| |
| else if((data->req.httpcode < 300) && |
| (!data->state.authhost.done) && |
| conn->bits.authneg) { |
| /* no (known) authentication available, |
| authentication is not "done" yet and |
| no authentication seems to be required and |
| we didn't try HEAD or GET */ |
| if((data->set.httpreq != HTTPREQ_GET) && |
| (data->set.httpreq != HTTPREQ_HEAD)) { |
| data->req.newurl = strdup(data->change.url); /* clone URL */ |
| if(!data->req.newurl) |
| return CURLE_OUT_OF_MEMORY; |
| data->state.authhost.done = TRUE; |
| } |
| } |
| if(Curl_http_should_fail(conn)) { |
| failf (data, "The requested URL returned error: %d", |
| data->req.httpcode); |
| code = CURLE_HTTP_RETURNED_ERROR; |
| } |
| |
| return code; |
| } |
| |
| |
| /* |
| * Output the correct authentication header depending on the auth type |
| * and whether or not it is to a proxy. |
| */ |
| static CURLcode |
| output_auth_headers(struct connectdata *conn, |
| struct auth *authstatus, |
| const char *request, |
| const char *path, |
| bool proxy) |
| { |
| struct SessionHandle *data = conn->data; |
| const char *auth=NULL; |
| CURLcode result = CURLE_OK; |
| #ifdef HAVE_GSSAPI |
| struct negotiatedata *negdata = proxy? |
| &data->state.proxyneg:&data->state.negotiate; |
| #endif |
| |
| #ifdef CURL_DISABLE_CRYPTO_AUTH |
| (void)request; |
| (void)path; |
| #endif |
| |
| #ifdef HAVE_GSSAPI |
| if((authstatus->picked == CURLAUTH_GSSNEGOTIATE) && |
| negdata->context && !GSS_ERROR(negdata->status)) { |
| auth="GSS-Negotiate"; |
| result = Curl_output_negotiate(conn, proxy); |
| if(result) |
| return result; |
| authstatus->done = TRUE; |
| negdata->state = GSS_AUTHSENT; |
| } |
| else |
| #endif |
| #ifdef USE_NTLM |
| if(authstatus->picked == CURLAUTH_NTLM) { |
| auth="NTLM"; |
| result = Curl_output_ntlm(conn, proxy); |
| if(result) |
| return result; |
| } |
| else |
| #endif |
| #ifndef CURL_DISABLE_CRYPTO_AUTH |
| if(authstatus->picked == CURLAUTH_DIGEST) { |
| auth="Digest"; |
| result = Curl_output_digest(conn, |
| proxy, |
| (const unsigned char *)request, |
| (const unsigned char *)path); |
| if(result) |
| return result; |
| } |
| else |
| #endif |
| if(authstatus->picked == CURLAUTH_BASIC) { |
| /* Basic */ |
| if((proxy && conn->bits.proxy_user_passwd && |
| !checkheaders(data, "Proxy-authorization:")) || |
| (!proxy && conn->bits.user_passwd && |
| !checkheaders(data, "Authorization:"))) { |
| auth="Basic"; |
| result = http_output_basic(conn, proxy); |
| if(result) |
| return result; |
| } |
| /* NOTE: this function should set 'done' TRUE, as the other auth |
| functions work that way */ |
| authstatus->done = TRUE; |
| } |
| |
| if(auth) { |
| infof(data, "%s auth using %s with user '%s'\n", |
| proxy?"Proxy":"Server", auth, |
| proxy?(conn->proxyuser?conn->proxyuser:""): |
| (conn->user?conn->user:"")); |
| authstatus->multi = (bool)(!authstatus->done); |
| } |
| else |
| authstatus->multi = FALSE; |
| |
| return CURLE_OK; |
| } |
| |
| /** |
| * Curl_http_output_auth() setups the authentication headers for the |
| * host/proxy and the correct authentication |
| * method. conn->data->state.authdone is set to TRUE when authentication is |
| * done. |
| * |
| * @param conn all information about the current connection |
| * @param request pointer to the request keyword |
| * @param path pointer to the requested path |
| * @param proxytunnel boolean if this is the request setting up a "proxy |
| * tunnel" |
| * |
| * @returns CURLcode |
| */ |
| static CURLcode |
| http_output_auth(struct connectdata *conn, |
| const char *request, |
| const char *path, |
| bool proxytunnel) /* TRUE if this is the request setting |
| up the proxy tunnel */ |
| { |
| CURLcode result = CURLE_OK; |
| struct SessionHandle *data = conn->data; |
| struct auth *authhost; |
| struct auth *authproxy; |
| |
| DEBUGASSERT(data); |
| |
| authhost = &data->state.authhost; |
| authproxy = &data->state.authproxy; |
| |
| if((conn->bits.httpproxy && conn->bits.proxy_user_passwd) || |
| conn->bits.user_passwd) |
| /* continue please */ ; |
| else { |
| authhost->done = TRUE; |
| authproxy->done = TRUE; |
| return CURLE_OK; /* no authentication with no user or password */ |
| } |
| |
| if(authhost->want && !authhost->picked) |
| /* The app has selected one or more methods, but none has been picked |
| so far by a server round-trip. Then we set the picked one to the |
| want one, and if this is one single bit it'll be used instantly. */ |
| authhost->picked = authhost->want; |
| |
| if(authproxy->want && !authproxy->picked) |
| /* The app has selected one or more methods, but none has been picked so |
| far by a proxy round-trip. Then we set the picked one to the want one, |
| and if this is one single bit it'll be used instantly. */ |
| authproxy->picked = authproxy->want; |
| |
| #ifndef CURL_DISABLE_PROXY |
| /* Send proxy authentication header if needed */ |
| if(conn->bits.httpproxy && |
| (conn->bits.tunnel_proxy == proxytunnel)) { |
| result = output_auth_headers(conn, authproxy, request, path, TRUE); |
| if(result) |
| return result; |
| } |
| else |
| #else |
| (void)proxytunnel; |
| #endif /* CURL_DISABLE_PROXY */ |
| /* we have no proxy so let's pretend we're done authenticating |
| with it */ |
| authproxy->done = TRUE; |
| |
| /* To prevent the user+password to get sent to other than the original |
| host due to a location-follow, we do some weirdo checks here */ |
| if(!data->state.this_is_a_follow || |
| conn->bits.netrc || |
| !data->state.first_host || |
| data->set.http_disable_hostname_check_before_authentication || |
| Curl_raw_equal(data->state.first_host, conn->host.name)) { |
| result = output_auth_headers(conn, authhost, request, path, FALSE); |
| } |
| else |
| authhost->done = TRUE; |
| |
| return result; |
| } |
| |
| |
| /* |
| * Curl_http_input_auth() deals with Proxy-Authenticate: and WWW-Authenticate: |
| * headers. They are dealt with both in the transfer.c main loop and in the |
| * proxy CONNECT loop. |
| */ |
| |
| CURLcode Curl_http_input_auth(struct connectdata *conn, |
| int httpcode, |
| const char *header) /* the first non-space */ |
| { |
| /* |
| * This resource requires authentication |
| */ |
| struct SessionHandle *data = conn->data; |
| |
| long *availp; |
| const char *start; |
| struct auth *authp; |
| |
| if(httpcode == 407) { |
| start = header+strlen("Proxy-authenticate:"); |
| availp = &data->info.proxyauthavail; |
| authp = &data->state.authproxy; |
| } |
| else { |
| start = header+strlen("WWW-Authenticate:"); |
| availp = &data->info.httpauthavail; |
| authp = &data->state.authhost; |
| } |
| |
| /* pass all white spaces */ |
| while(*start && ISSPACE(*start)) |
| start++; |
| |
| /* |
| * Here we check if we want the specific single authentication (using ==) and |
| * if we do, we initiate usage of it. |
| * |
| * If the provided authentication is wanted as one out of several accepted |
| * types (using &), we OR this authentication type to the authavail |
| * variable. |
| * |
| * Note: |
| * |
| * ->picked is first set to the 'want' value (one or more bits) before the |
| * request is sent, and then it is again set _after_ all response 401/407 |
| * headers have been received but then only to a single preferred method |
| * (bit). |
| * |
| */ |
| |
| #ifdef HAVE_GSSAPI |
| if(checkprefix("GSS-Negotiate", start) || |
| checkprefix("Negotiate", start)) { |
| int neg; |
| *availp |= CURLAUTH_GSSNEGOTIATE; |
| authp->avail |= CURLAUTH_GSSNEGOTIATE; |
| |
| if(data->state.negotiate.state == GSS_AUTHSENT) { |
| /* if we sent GSS authentication in the outgoing request and we get this |
| back, we're in trouble */ |
| infof(data, "Authentication problem. Ignoring this.\n"); |
| data->state.authproblem = TRUE; |
| } |
| else { |
| neg = Curl_input_negotiate(conn, (bool)(httpcode == 407), start); |
| if(neg == 0) { |
| DEBUGASSERT(!data->req.newurl); |
| data->req.newurl = strdup(data->change.url); |
| if(!data->req.newurl) |
| return CURLE_OUT_OF_MEMORY; |
| data->state.authproblem = FALSE; |
| /* we received GSS auth info and we dealt with it fine */ |
| data->state.negotiate.state = GSS_AUTHRECV; |
| } |
| } |
| } |
| else |
| #endif |
| #ifdef USE_NTLM |
| /* NTLM support requires the SSL crypto libs */ |
| if(checkprefix("NTLM", start)) { |
| *availp |= CURLAUTH_NTLM; |
| authp->avail |= CURLAUTH_NTLM; |
| if(authp->picked == CURLAUTH_NTLM) { |
| /* NTLM authentication is picked and activated */ |
| CURLntlm ntlm = |
| Curl_input_ntlm(conn, (bool)(httpcode == 407), start); |
| |
| if(CURLNTLM_BAD != ntlm) |
| data->state.authproblem = FALSE; |
| else { |
| infof(data, "Authentication problem. Ignoring this.\n"); |
| data->state.authproblem = TRUE; |
| } |
| } |
| } |
| else |
| #endif |
| #ifndef CURL_DISABLE_CRYPTO_AUTH |
| if(checkprefix("Digest", start)) { |
| if((authp->avail & CURLAUTH_DIGEST) != 0) { |
| infof(data, "Ignoring duplicate digest auth header.\n"); |
| } |
| else { |
| CURLdigest dig; |
| *availp |= CURLAUTH_DIGEST; |
| authp->avail |= CURLAUTH_DIGEST; |
| |
| /* We call this function on input Digest headers even if Digest |
| * authentication isn't activated yet, as we need to store the |
| * incoming data from this header in case we are gonna use Digest. */ |
| dig = Curl_input_digest(conn, (bool)(httpcode == 407), start); |
| |
| if(CURLDIGEST_FINE != dig) { |
| infof(data, "Authentication problem. Ignoring this.\n"); |
| data->state.authproblem = TRUE; |
| } |
| } |
| } |
| else |
| #endif |
| if(checkprefix("Basic", start)) { |
| *availp |= CURLAUTH_BASIC; |
| authp->avail |= CURLAUTH_BASIC; |
| if(authp->picked == CURLAUTH_BASIC) { |
| /* We asked for Basic authentication but got a 40X back |
| anyway, which basically means our name+password isn't |
| valid. */ |
| authp->avail = CURLAUTH_NONE; |
| infof(data, "Authentication problem. Ignoring this.\n"); |
| data->state.authproblem = TRUE; |
| } |
| } |
| |
| return CURLE_OK; |
| } |
| |
| /** |
| * Curl_http_should_fail() determines whether an HTTP response has gotten us |
| * into an error state or not. |
| * |
| * @param conn all information about the current connection |
| * |
| * @retval 0 communications should continue |
| * |
| * @retval 1 communications should not continue |
| */ |
| int Curl_http_should_fail(struct connectdata *conn) |
| { |
| struct SessionHandle *data; |
| int httpcode; |
| |
| DEBUGASSERT(conn); |
| data = conn->data; |
| DEBUGASSERT(data); |
| |
| httpcode = data->req.httpcode; |
| |
| /* |
| ** If we haven't been asked to fail on error, |
| ** don't fail. |
| */ |
| if(!data->set.http_fail_on_error) |
| return 0; |
| |
| /* |
| ** Any code < 400 is never terminal. |
| */ |
| if(httpcode < 400) |
| return 0; |
| |
| if(data->state.resume_from && |
| (data->set.httpreq==HTTPREQ_GET) && |
| (httpcode == 416)) { |
| /* "Requested Range Not Satisfiable", just proceed and |
| pretend this is no error */ |
| return 0; |
| } |
| |
| /* |
| ** Any code >= 400 that's not 401 or 407 is always |
| ** a terminal error |
| */ |
| if((httpcode != 401) && |
| (httpcode != 407)) |
| return 1; |
| |
| /* |
| ** All we have left to deal with is 401 and 407 |
| */ |
| DEBUGASSERT((httpcode == 401) || (httpcode == 407)); |
| |
| /* |
| ** Examine the current authentication state to see if this |
| ** is an error. The idea is for this function to get |
| ** called after processing all the headers in a response |
| ** message. So, if we've been to asked to authenticate a |
| ** particular stage, and we've done it, we're OK. But, if |
| ** we're already completely authenticated, it's not OK to |
| ** get another 401 or 407. |
| ** |
| ** It is possible for authentication to go stale such that |
| ** the client needs to reauthenticate. Once that info is |
| ** available, use it here. |
| */ |
| #if 0 /* set to 1 when debugging this functionality */ |
| infof(data,"%s: authstage = %d\n",__FUNCTION__,data->state.authstage); |
| infof(data,"%s: authwant = 0x%08x\n",__FUNCTION__,data->state.authwant); |
| infof(data,"%s: authavail = 0x%08x\n",__FUNCTION__,data->state.authavail); |
| infof(data,"%s: httpcode = %d\n",__FUNCTION__,k->httpcode); |
| infof(data,"%s: authdone = %d\n",__FUNCTION__,data->state.authdone); |
| infof(data,"%s: newurl = %s\n",__FUNCTION__,data->req.newurl ? |
| data->req.newurl : "(null)"); |
| infof(data,"%s: authproblem = %d\n",__FUNCTION__,data->state.authproblem); |
| #endif |
| |
| /* |
| ** Either we're not authenticating, or we're supposed to |
| ** be authenticating something else. This is an error. |
| */ |
| if((httpcode == 401) && !conn->bits.user_passwd) |
| return TRUE; |
| if((httpcode == 407) && !conn->bits.proxy_user_passwd) |
| return TRUE; |
| |
| return data->state.authproblem; |
| } |
| |
| /* |
| * readmoredata() is a "fread() emulation" to provide POST and/or request |
| * data. It is used when a huge POST is to be made and the entire chunk wasn't |
| * sent in the first send(). This function will then be called from the |
| * transfer.c loop when more data is to be sent to the peer. |
| * |
| * Returns the amount of bytes it filled the buffer with. |
| */ |
| static size_t readmoredata(char *buffer, |
| size_t size, |
| size_t nitems, |
| void *userp) |
| { |
| struct connectdata *conn = (struct connectdata *)userp; |
| struct HTTP *http = conn->data->state.proto.http; |
| size_t fullsize = size * nitems; |
| |
| if(0 == http->postsize) |
| /* nothing to return */ |
| return 0; |
| |
| /* make sure that a HTTP request is never sent away chunked! */ |
| conn->data->req.forbidchunk = (bool)(http->sending == HTTPSEND_REQUEST); |
| |
| if(http->postsize <= (curl_off_t)fullsize) { |
| memcpy(buffer, http->postdata, (size_t)http->postsize); |
| fullsize = (size_t)http->postsize; |
| |
| if(http->backup.postsize) { |
| /* move backup data into focus and continue on that */ |
| http->postdata = http->backup.postdata; |
| http->postsize = http->backup.postsize; |
| conn->fread_func = http->backup.fread_func; |
| conn->fread_in = http->backup.fread_in; |
| |
| http->sending++; /* move one step up */ |
| |
| http->backup.postsize=0; |
| } |
| else |
| http->postsize = 0; |
| |
| return fullsize; |
| } |
| |
| memcpy(buffer, http->postdata, fullsize); |
| http->postdata += fullsize; |
| http->postsize -= fullsize; |
| |
| return fullsize; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| /* |
| * The add_buffer series of functions are used to build one large memory chunk |
| * from repeated function invokes. Used so that the entire HTTP request can |
| * be sent in one go. |
| */ |
| |
| struct send_buffer { |
| char *buffer; |
| size_t size_max; |
| size_t size_used; |
| }; |
| typedef struct send_buffer send_buffer; |
| |
| static CURLcode add_custom_headers(struct connectdata *conn, |
| send_buffer *req_buffer); |
| static CURLcode |
| add_buffer(send_buffer *in, const void *inptr, size_t size); |
| |
| /* |
| * add_buffer_init() sets up and returns a fine buffer struct |
| */ |
| static |
| send_buffer *add_buffer_init(void) |
| { |
| return calloc(sizeof(send_buffer), 1); |
| } |
| |
| /* |
| * add_buffer_send() sends a header buffer and frees all associated memory. |
| * Body data may be appended to the header data if desired. |
| * |
| * Returns CURLcode |
| */ |
| static |
| CURLcode add_buffer_send(send_buffer *in, |
| struct connectdata *conn, |
| long *bytes_written, /* add the number of sent bytes |
| to this counter */ |
| size_t included_body_bytes, /* how much of the buffer |
| contains body data */ |
| int socketindex) |
| |
| { |
| ssize_t amount; |
| CURLcode res; |
| char *ptr; |
| size_t size; |
| struct HTTP *http = conn->data->state.proto.http; |
| size_t sendsize; |
| curl_socket_t sockfd; |
| size_t headersize; |
| |
| DEBUGASSERT(socketindex <= SECONDARYSOCKET); |
| |
| sockfd = conn->sock[socketindex]; |
| |
| /* The looping below is required since we use non-blocking sockets, but due |
| to the circumstances we will just loop and try again and again etc */ |
| |
| ptr = in->buffer; |
| size = in->size_used; |
| |
| headersize = size - included_body_bytes; /* the initial part that isn't body |
| is header */ |
| |
| DEBUGASSERT(size > included_body_bytes); |
| |
| #ifdef CURL_DOES_CONVERSIONS |
| res = Curl_convert_to_network(conn->data, ptr, headersize); |
| /* Curl_convert_to_network calls failf if unsuccessful */ |
| if(res != CURLE_OK) { |
| /* conversion failed, free memory and return to the caller */ |
| if(in->buffer) |
| free(in->buffer); |
| free(in); |
| return res; |
| } |
| #endif /* CURL_DOES_CONVERSIONS */ |
| |
| if(conn->protocol & PROT_HTTPS) { |
| /* We never send more than CURL_MAX_WRITE_SIZE bytes in one single chunk |
| when we speak HTTPS, as if only a fraction of it is sent now, this data |
| needs to fit into the normal read-callback buffer later on and that |
| buffer is using this size. |
| */ |
| |
| sendsize= (size > CURL_MAX_WRITE_SIZE)?CURL_MAX_WRITE_SIZE:size; |
| |
| /* OpenSSL is very picky and we must send the SAME buffer pointer to the |
| library when we attempt to re-send this buffer. Sending the same data |
| is not enough, we must use the exact same address. For this reason, we |
| must copy the data to the uploadbuffer first, since that is the buffer |
| we will be using if this send is retried later. |
| */ |
| memcpy(conn->data->state.uploadbuffer, ptr, sendsize); |
| ptr = conn->data->state.uploadbuffer; |
| } |
| else |
| sendsize = size; |
| |
| res = Curl_write(conn, sockfd, ptr, sendsize, &amount); |
| |
| if(CURLE_OK == res) { |
| /* |
| * Note that we may not send the entire chunk at once, and we have a set |
| * number of data bytes at the end of the big buffer (out of which we may |
| * only send away a part). |
| */ |
| /* how much of the header that was sent */ |
| size_t headlen = (size_t)amount>headersize?headersize:(size_t)amount; |
| size_t bodylen = amount - headlen; |
| |
| if(conn->data->set.verbose) { |
| /* this data _may_ contain binary stuff */ |
| Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, headlen, conn); |
| if((size_t)amount > headlen) { |
| /* there was body data sent beyond the initial header part, pass that |
| on to the debug callback too */ |
| Curl_debug(conn->data, CURLINFO_DATA_OUT, |
| ptr+headlen, bodylen, conn); |
| } |
| } |
| if(bodylen) |
| /* since we sent a piece of the body here, up the byte counter for it |
| accordingly */ |
| http->writebytecount += bodylen; |
| |
| *bytes_written += amount; |
| |
| if(http) { |
| if((size_t)amount != size) { |
| /* The whole request could not be sent in one system call. We must |
| queue it up and send it later when we get the chance. We must not |
| loop here and wait until it might work again. */ |
| |
| size -= amount; |
| |
| ptr = in->buffer + amount; |
| |
| /* backup the currently set pointers */ |
| http->backup.fread_func = conn->fread_func; |
| http->backup.fread_in = conn->fread_in; |
| http->backup.postdata = http->postdata; |
| http->backup.postsize = http->postsize; |
| |
| /* set the new pointers for the request-sending */ |
| conn->fread_func = (curl_read_callback)readmoredata; |
| conn->fread_in = (void *)conn; |
| http->postdata = ptr; |
| http->postsize = (curl_off_t)size; |
| |
| http->send_buffer = in; |
| http->sending = HTTPSEND_REQUEST; |
| |
| return CURLE_OK; |
| } |
| http->sending = HTTPSEND_BODY; |
| /* the full buffer was sent, clean up and return */ |
| } |
| else { |
| if((size_t)amount != size) |
| /* We have no continue-send mechanism now, fail. This can only happen |
| when this function is used from the CONNECT sending function. We |
| currently (stupidly) assume that the whole request is always sent |
| away in the first single chunk. |
| |
| This needs FIXing. |
| */ |
| return CURLE_SEND_ERROR; |
| else |
| conn->writechannel_inuse = FALSE; |
| } |
| } |
| if(in->buffer) |
| free(in->buffer); |
| free(in); |
| |
| return res; |
| } |
| |
| |
| /* |
| * add_bufferf() add the formatted input to the buffer. |
| */ |
| static |
| CURLcode add_bufferf(send_buffer *in, const char *fmt, ...) |
| { |
| char *s; |
| va_list ap; |
| va_start(ap, fmt); |
| s = vaprintf(fmt, ap); /* this allocs a new string to append */ |
| va_end(ap); |
| |
| if(s) { |
| CURLcode result = add_buffer(in, s, strlen(s)); |
| free(s); |
| return result; |
| } |
| /* If we failed, we cleanup the whole buffer and return error */ |
| if(in->buffer) |
| free(in->buffer); |
| free(in); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| /* |
| * add_buffer() appends a memory chunk to the existing buffer |
| */ |
| static |
| CURLcode add_buffer(send_buffer *in, const void *inptr, size_t size) |
| { |
| char *new_rb; |
| size_t new_size; |
| |
| if(~size < in->size_used) { |
| /* If resulting used size of send buffer would wrap size_t, cleanup |
| the whole buffer and return error. Otherwise the required buffer |
| size will fit into a single allocatable memory chunk */ |
| Curl_safefree(in->buffer); |
| free(in); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| if(!in->buffer || |
| ((in->size_used + size) > (in->size_max - 1))) { |
| |
| /* If current buffer size isn't enough to hold the result, use a |
| buffer size that doubles the required size. If this new size |
| would wrap size_t, then just use the largest possible one */ |
| |
| if((size > (size_t)-1/2) || (in->size_used > (size_t)-1/2) || |
| (~(size*2) < (in->size_used*2))) |
| new_size = (size_t)-1; |
| else |
| new_size = (in->size_used+size)*2; |
| |
| if(in->buffer) |
| /* we have a buffer, enlarge the existing one */ |
| new_rb = realloc(in->buffer, new_size); |
| else |
| /* create a new buffer */ |
| new_rb = malloc(new_size); |
| |
| if(!new_rb) { |
| /* If we failed, we cleanup the whole buffer and return error */ |
| Curl_safefree(in->buffer); |
| free(in); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| in->buffer = new_rb; |
| in->size_max = new_size; |
| } |
| memcpy(&in->buffer[in->size_used], inptr, size); |
| |
| in->size_used += size; |
| |
| return CURLE_OK; |
| } |
| |
| /* end of the add_buffer functions */ |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * Curl_compareheader() |
| * |
| * Returns TRUE if 'headerline' contains the 'header' with given 'content'. |
| * Pass headers WITH the colon. |
| */ |
| bool |
| Curl_compareheader(const char *headerline, /* line to check */ |
| const char *header, /* header keyword _with_ colon */ |
| const char *content) /* content string to find */ |
| { |
| /* RFC2616, section 4.2 says: "Each header field consists of a name followed |
| * by a colon (":") and the field value. Field names are case-insensitive. |
| * The field value MAY be preceded by any amount of LWS, though a single SP |
| * is preferred." */ |
| |
| size_t hlen = strlen(header); |
| size_t clen; |
| size_t len; |
| const char *start; |
| const char *end; |
| |
| if(!Curl_raw_nequal(headerline, header, hlen)) |
| return FALSE; /* doesn't start with header */ |
| |
| /* pass the header */ |
| start = &headerline[hlen]; |
| |
| /* pass all white spaces */ |
| while(*start && ISSPACE(*start)) |
| start++; |
| |
| /* find the end of the header line */ |
| end = strchr(start, '\r'); /* lines end with CRLF */ |
| if(!end) { |
| /* in case there's a non-standard compliant line here */ |
| end = strchr(start, '\n'); |
| |
| if(!end) |
| /* hm, there's no line ending here, use the zero byte! */ |
| end = strchr(start, '\0'); |
| } |
| |
| len = end-start; /* length of the content part of the input line */ |
| clen = strlen(content); /* length of the word to find */ |
| |
| /* find the content string in the rest of the line */ |
| for(;len>=clen;len--, start++) { |
| if(Curl_raw_nequal(start, content, clen)) |
| return TRUE; /* match! */ |
| } |
| |
| return FALSE; /* no match */ |
| } |
| |
| #ifndef CURL_DISABLE_PROXY |
| /* |
| * Curl_proxyCONNECT() requires that we're connected to a HTTP proxy. This |
| * function will issue the necessary commands to get a seamless tunnel through |
| * this proxy. After that, the socket can be used just as a normal socket. |
| * |
| * This badly needs to be rewritten. CONNECT should be sent and dealt with |
| * like any ordinary HTTP request, and not specially crafted like this. This |
| * function only remains here like this for now since the rewrite is a bit too |
| * much work to do at the moment. |
| * |
| * This function is BLOCKING which is nasty for all multi interface using apps. |
| */ |
| |
| CURLcode Curl_proxyCONNECT(struct connectdata *conn, |
| int sockindex, |
| const char *hostname, |
| unsigned short remote_port) |
| { |
| int subversion=0; |
| struct SessionHandle *data=conn->data; |
| struct SingleRequest *k = &data->req; |
| CURLcode result; |
| int res; |
| long timeout = |
| data->set.timeout?data->set.timeout:PROXY_TIMEOUT; /* in milliseconds */ |
| curl_socket_t tunnelsocket = conn->sock[sockindex]; |
| curl_off_t cl=0; |
| bool closeConnection = FALSE; |
| bool chunked_encoding = FALSE; |
| long check; |
| |
| #define SELECT_OK 0 |
| #define SELECT_ERROR 1 |
| #define SELECT_TIMEOUT 2 |
| int error = SELECT_OK; |
| |
| conn->bits.proxy_connect_closed = FALSE; |
| |
| do { |
| if(!conn->bits.tunnel_connecting) { /* BEGIN CONNECT PHASE */ |
| char *host_port; |
| send_buffer *req_buffer; |
| |
| infof(data, "Establish HTTP proxy tunnel to %s:%d\n", |
| hostname, remote_port); |
| |
| if(data->req.newurl) { |
| /* This only happens if we've looped here due to authentication |
| reasons, and we don't really use the newly cloned URL here |
| then. Just free() it. */ |
| free(data->req.newurl); |
| data->req.newurl = NULL; |
| } |
| |
| /* initialize a dynamic send-buffer */ |
| req_buffer = add_buffer_init(); |
| |
| if(!req_buffer) |
| return CURLE_OUT_OF_MEMORY; |
| |
| host_port = aprintf("%s:%d", hostname, remote_port); |
| if(!host_port) { |
| free(req_buffer); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| /* Setup the proxy-authorization header, if any */ |
| result = http_output_auth(conn, "CONNECT", host_port, TRUE); |
| |
| if(CURLE_OK == result) { |
| char *host=(char *)""; |
| const char *proxyconn=""; |
| const char *useragent=""; |
| const char *http = (conn->proxytype == CURLPROXY_HTTP_1_0) ? |
| "1.0" : "1.1"; |
| |
| if(!checkheaders(data, "Host:")) { |
| host = aprintf("Host: %s\r\n", host_port); |
| if(!host) { |
| free(req_buffer); |
| free(host_port); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| } |
| if(!checkheaders(data, "Proxy-Connection:")) |
| proxyconn = "Proxy-Connection: Keep-Alive\r\n"; |
| |
| if(!checkheaders(data, "User-Agent:") && |
| data->set.str[STRING_USERAGENT]) |
| useragent = conn->allocptr.uagent; |
| |
| /* Send the connect request to the proxy */ |
| /* BLOCKING */ |
| result = |
| add_bufferf(req_buffer, |
| "CONNECT %s:%d HTTP/%s\r\n" |
| "%s" /* Host: */ |
| "%s" /* Proxy-Authorization */ |
| "%s" /* User-Agent */ |
| "%s", /* Proxy-Connection */ |
| hostname, remote_port, http, |
| host, |
| conn->allocptr.proxyuserpwd? |
| conn->allocptr.proxyuserpwd:"", |
| useragent, |
| proxyconn); |
| |
| if(host && *host) |
| free(host); |
| |
| if(CURLE_OK == result) |
| result = add_custom_headers(conn, req_buffer); |
| |
| if(CURLE_OK == result) |
| /* CRLF terminate the request */ |
| result = add_bufferf(req_buffer, "\r\n"); |
| |
| if(CURLE_OK == result) { |
| /* Now send off the request */ |
| result = add_buffer_send(req_buffer, conn, |
| &data->info.request_size, 0, sockindex); |
| } |
| req_buffer = NULL; |
| if(result) |
| failf(data, "Failed sending CONNECT to proxy"); |
| } |
| free(host_port); |
| Curl_safefree(req_buffer); |
| if(result) |
| return result; |
| |
| conn->bits.tunnel_connecting = TRUE; |
| } /* END CONNECT PHASE */ |
| |
| /* now we've issued the CONNECT and we're waiting to hear back - |
| we try not to block here in multi-mode because that might be a LONG |
| wait if the proxy cannot connect-through to the remote host. */ |
| |
| /* if timeout is requested, find out how much remaining time we have */ |
| check = timeout - /* timeout time */ |
| Curl_tvdiff(Curl_tvnow(), conn->now); /* spent time */ |
| if(check <= 0) { |
| failf(data, "Proxy CONNECT aborted due to timeout"); |
| return CURLE_RECV_ERROR; |
| } |
| |
| /* if we're in multi-mode and we would block, return instead for a retry */ |
| if(Curl_if_multi == data->state.used_interface) { |
| if(0 == Curl_socket_ready(tunnelsocket, CURL_SOCKET_BAD, 0)) |
| /* return so we'll be called again polling-style */ |
| return CURLE_OK; |
| else { |
| DEBUGF(infof(data, |
| "Multi mode finished polling for response from " |
| "proxy CONNECT.")); |
| } |
| } |
| else { |
| DEBUGF(infof(data, "Easy mode waiting for response from proxy CONNECT.")); |
| } |
| |
| /* at this point, either: |
| 1) we're in easy-mode and so it's okay to block waiting for a CONNECT |
| response |
| 2) we're in multi-mode and we didn't block - it's either an error or we |
| now have some data waiting. |
| In any case, the tunnel_connecting phase is over. */ |
| conn->bits.tunnel_connecting = FALSE; |
| |
| { /* BEGIN NEGOTIATION PHASE */ |
| size_t nread; /* total size read */ |
| int perline; /* count bytes per line */ |
| int keepon=TRUE; |
| ssize_t gotbytes; |
| char *ptr; |
| char *line_start; |
| |
| ptr=data->state.buffer; |
| line_start = ptr; |
| |
| nread=0; |
| perline=0; |
| keepon=TRUE; |
| |
| while((nread<BUFSIZE) && (keepon && !error)) { |
| |
| /* if timeout is requested, find out how much remaining time we have */ |
| check = timeout - /* timeout time */ |
| Curl_tvdiff(Curl_tvnow(), conn->now); /* spent time */ |
| if(check <= 0) { |
| failf(data, "Proxy CONNECT aborted due to timeout"); |
| error = SELECT_TIMEOUT; /* already too little time */ |
| break; |
| } |
| |
| /* loop every second at least, less if the timeout is near */ |
| switch (Curl_socket_ready(tunnelsocket, CURL_SOCKET_BAD, |
| check<1000L?(int)check:1000)) { |
| case -1: /* select() error, stop reading */ |
| error = SELECT_ERROR; |
| failf(data, "Proxy CONNECT aborted due to select/poll error"); |
| break; |
| case 0: /* timeout */ |
| break; |
| default: |
| DEBUGASSERT(ptr+BUFSIZE-nread <= data->state.buffer+BUFSIZE+1); |
| res = Curl_read(conn, tunnelsocket, ptr, BUFSIZE-nread, &gotbytes); |
| if(res< 0) |
| /* EWOULDBLOCK */ |
| continue; /* go loop yourself */ |
| else if(res) |
| keepon = FALSE; |
| else if(gotbytes <= 0) { |
| keepon = FALSE; |
| if(data->set.proxyauth && data->state.authproxy.avail) { |
| /* proxy auth was requested and there was proxy auth available, |
| then deem this as "mere" proxy disconnect */ |
| conn->bits.proxy_connect_closed = TRUE; |
| } |
| else { |
| error = SELECT_ERROR; |
| failf(data, "Proxy CONNECT aborted"); |
| } |
| } |
| else { |
| /* |
| * We got a whole chunk of data, which can be anything from one |
| * byte to a set of lines and possibly just a piece of the last |
| * line. |
| */ |
| int i; |
| |
| nread += gotbytes; |
| |
| if(keepon > TRUE) { |
| /* This means we are currently ignoring a response-body */ |
| |
| nread = 0; /* make next read start over in the read buffer */ |
| ptr=data->state.buffer; |
| if(cl) { |
| /* A Content-Length based body: simply count down the counter |
| and make sure to break out of the loop when we're done! */ |
| cl -= gotbytes; |
| if(cl<=0) { |
| keepon = FALSE; |
| break; |
| } |
| } |
| else { |
| /* chunked-encoded body, so we need to do the chunked dance |
| properly to know when the end of the body is reached */ |
| CHUNKcode r; |
| ssize_t tookcareof=0; |
| |
| /* now parse the chunked piece of data so that we can |
| properly tell when the stream ends */ |
| r = Curl_httpchunk_read(conn, ptr, gotbytes, &tookcareof); |
| if(r == CHUNKE_STOP) { |
| /* we're done reading chunks! */ |
| infof(data, "chunk reading DONE\n"); |
| keepon = FALSE; |
| } |
| else |
| infof(data, "Read %d bytes of chunk, continue\n", |
| tookcareof); |
| } |
| } |
| else |
| for(i = 0; i < gotbytes; ptr++, i++) { |
| perline++; /* amount of bytes in this line so far */ |
| if(*ptr == 0x0a) { |
| char letter; |
| int writetype; |
| |
| #ifdef CURL_DOES_CONVERSIONS |
| /* convert from the network encoding */ |
| result = Curl_convert_from_network(data, line_start, perline); |
| /* Curl_convert_from_network calls failf if unsuccessful */ |
| if(result) |
| return result; |
| #endif /* CURL_DOES_CONVERSIONS */ |
| |
| /* output debug if that is requested */ |
| if(data->set.verbose) |
| Curl_debug(data, CURLINFO_HEADER_IN, |
| line_start, (size_t)perline, conn); |
| |
| /* send the header to the callback */ |
| writetype = CLIENTWRITE_HEADER; |
| if(data->set.include_header) |
| writetype |= CLIENTWRITE_BODY; |
| |
| result = Curl_client_write(conn, writetype, line_start, |
| perline); |
| if(result) |
| return result; |
| |
| /* Newlines are CRLF, so the CR is ignored as the line isn't |
| really terminated until the LF comes. Treat a following CR |
| as end-of-headers as well.*/ |
| |
| if(('\r' == line_start[0]) || |
| ('\n' == line_start[0])) { |
| /* end of response-headers from the proxy */ |
| nread = 0; /* make next read start over in the read |
| buffer */ |
| ptr=data->state.buffer; |
| if((407 == k->httpcode) && !data->state.authproblem) { |
| /* If we get a 407 response code with content length |
| when we have no auth problem, we must ignore the |
| whole response-body */ |
| keepon = 2; |
| |
| if(cl) { |
| |
| infof(data, "Ignore %" FORMAT_OFF_T |
| " bytes of response-body\n", cl); |
| /* remove the remaining chunk of what we already |
| read */ |
| cl -= (gotbytes - i); |
| |
| if(cl<=0) |
| /* if the whole thing was already read, we are done! |
| */ |
| keepon=FALSE; |
| } |
| else if(chunked_encoding) { |
| CHUNKcode r; |
| /* We set ignorebody true here since the chunked |
| decoder function will acknowledge that. Pay |
| attention so that this is cleared again when this |
| function returns! */ |
| k->ignorebody = TRUE; |
| infof(data, "%d bytes of chunk left\n", gotbytes-i); |
| |
| if(line_start[1] == '\n') { |
| /* this can only be a LF if the letter at index 0 |
| was a CR */ |
| line_start++; |
| i++; |
| } |
| |
| /* now parse the chunked piece of data so that we can |
| properly tell when the stream ends */ |
| r = Curl_httpchunk_read(conn, line_start+1, |
| gotbytes -i, &gotbytes); |
| if(r == CHUNKE_STOP) { |
| /* we're done reading chunks! */ |
| infof(data, "chunk reading DONE\n"); |
| keepon = FALSE; |
| } |
| else |
| infof(data, "Read %d bytes of chunk, continue\n", |
| gotbytes); |
| } |
| else { |
| /* without content-length or chunked encoding, we |
| can't keep the connection alive since the close is |
| the end signal so we bail out at once instead */ |
| keepon=FALSE; |
| } |
| } |
| else |
| keepon = FALSE; |
| break; /* breaks out of for-loop, not switch() */ |
| } |
| |
| /* keep a backup of the position we are about to blank */ |
| letter = line_start[perline]; |
| line_start[perline]=0; /* zero terminate the buffer */ |
| if((checkprefix("WWW-Authenticate:", line_start) && |
| (401 == k->httpcode)) || |
| (checkprefix("Proxy-authenticate:", line_start) && |
| (407 == k->httpcode))) { |
| result = Curl_http_input_auth(conn, k->httpcode, |
| line_start); |
| if(result) |
| return result; |
| } |
| else if(checkprefix("Content-Length:", line_start)) { |
| cl = curlx_strtoofft(line_start + strlen("Content-Length:"), |
| NULL, 10); |
| } |
| else if(Curl_compareheader(line_start, |
| "Connection:", "close")) |
| closeConnection = TRUE; |
| else if(Curl_compareheader(line_start, |
| "Transfer-Encoding:", "chunked")) { |
| infof(data, "CONNECT responded chunked\n"); |
| chunked_encoding = TRUE; |
| /* init our chunky engine */ |
| Curl_httpchunk_init(conn); |
| } |
| else if(Curl_compareheader(line_start, |
| "Proxy-Connection:", "close")) |
| closeConnection = TRUE; |
| else if(2 == sscanf(line_start, "HTTP/1.%d %d", |
| &subversion, |
| &k->httpcode)) { |
| /* store the HTTP code from the proxy */ |
| data->info.httpproxycode = k->httpcode; |
| } |
| /* put back the letter we blanked out before */ |
| line_start[perline]= letter; |
| |
| perline=0; /* line starts over here */ |
| line_start = ptr+1; /* this skips the zero byte we wrote */ |
| } |
| } |
| } |
| break; |
| } /* switch */ |
| if(Curl_pgrsUpdate(conn)) |
| return CURLE_ABORTED_BY_CALLBACK; |
| } /* while there's buffer left and loop is requested */ |
| |
| if(error) |
| return CURLE_RECV_ERROR; |
| |
| if(data->info.httpproxycode != 200) { |
| /* Deal with the possibly already received authenticate |
| headers. 'newurl' is set to a new URL if we must loop. */ |
| result = Curl_http_auth_act(conn); |
| if(result) |
| return result; |
| |
| if(conn->bits.close) |
| /* the connection has been marked for closure, most likely in the |
| Curl_http_auth_act() function and thus we can kill it at once |
| below |
| */ |
| closeConnection = TRUE; |
| } |
| |
| if(closeConnection && data->req.newurl) { |
| /* Connection closed by server. Don't use it anymore */ |
| sclose(conn->sock[sockindex]); |
| conn->sock[sockindex] = CURL_SOCKET_BAD; |
| break; |
| } |
| } /* END NEGOTIATION PHASE */ |
| } while(data->req.newurl); |
| |
| if(200 != data->req.httpcode) { |
| failf(data, "Received HTTP code %d from proxy after CONNECT", |
| data->req.httpcode); |
| |
| if(closeConnection && data->req.newurl) |
| conn->bits.proxy_connect_closed = TRUE; |
| |
| return CURLE_RECV_ERROR; |
| } |
| |
| /* If a proxy-authorization header was used for the proxy, then we should |
| make sure that it isn't accidentally used for the document request |
| after we've connected. So let's free and clear it here. */ |
| Curl_safefree(conn->allocptr.proxyuserpwd); |
| conn->allocptr.proxyuserpwd = NULL; |
| |
| data->state.authproxy.done = TRUE; |
| |
| infof (data, "Proxy replied OK to CONNECT request\n"); |
| data->req.ignorebody = FALSE; /* put it (back) to non-ignore state */ |
| return CURLE_OK; |
| } |
| #endif /* CURL_DISABLE_PROXY */ |
| |
| /* |
| * Curl_http_connect() performs HTTP stuff to do at connect-time, called from |
| * the generic Curl_connect(). |
| */ |
| CURLcode Curl_http_connect(struct connectdata *conn, bool *done) |
| { |
| struct SessionHandle *data; |
| CURLcode result; |
| |
| data=conn->data; |
| |
| /* We default to persistent connections. We set this already in this connect |
| function to make the re-use checks properly be able to check this bit. */ |
| conn->bits.close = FALSE; |
| |
| #ifndef CURL_DISABLE_PROXY |
| /* If we are not using a proxy and we want a secure connection, perform SSL |
| * initialization & connection now. If using a proxy with https, then we |
| * must tell the proxy to CONNECT to the host we want to talk to. Only |
| * after the connect has occurred, can we start talking SSL |
| */ |
| if(conn->bits.tunnel_proxy && conn->bits.httpproxy) { |
| |
| /* either SSL over proxy, or explicitly asked for */ |
| result = Curl_proxyCONNECT(conn, FIRSTSOCKET, |
| conn->host.name, |
| conn->remote_port); |
| if(CURLE_OK != result) |
| return result; |
| } |
| |
| if(conn->bits.tunnel_connecting) { |
| /* nothing else to do except wait right now - we're not done here. */ |
| return CURLE_OK; |
| } |
| #endif /* CURL_DISABLE_PROXY */ |
| |
| if(conn->protocol & PROT_HTTPS) { |
| /* perform SSL initialization */ |
| if(data->state.used_interface == Curl_if_multi) { |
| result = https_connecting(conn, done); |
| if(result) |
| return result; |
| } |
| else { |
| /* BLOCKING */ |
| result = Curl_ssl_connect(conn, FIRSTSOCKET); |
| if(result) |
| return result; |
| *done = TRUE; |
| } |
| } |
| else { |
| *done = TRUE; |
| } |
| |
| return CURLE_OK; |
| } |
| |
| /* this returns the socket to wait for in the DO and DOING state for the multi |
| interface and then we're always _sending_ a request and thus we wait for |
| the single socket to become writable only */ |
| static int http_getsock_do(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks) |
| { |
| /* write mode */ |
| (void)numsocks; /* unused, we trust it to be at least 1 */ |
| socks[0] = conn->sock[FIRSTSOCKET]; |
| return GETSOCK_WRITESOCK(0); |
| } |
| |
| #ifdef USE_SSL |
| static CURLcode https_connecting(struct connectdata *conn, bool *done) |
| { |
| CURLcode result; |
| DEBUGASSERT((conn) && (conn->protocol & PROT_HTTPS)); |
| |
| /* perform SSL initialization for this socket */ |
| result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, done); |
| if(result) |
| conn->bits.close = TRUE; /* a failed connection is marked for closure |
| to prevent (bad) re-use or similar */ |
| return result; |
| } |
| #endif |
| |
| #ifdef USE_SSLEAY |
| /* This function is OpenSSL-specific. It should be made to query the generic |
| SSL layer instead. */ |
| static int https_getsock(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks) |
| { |
| if(conn->protocol & PROT_HTTPS) { |
| struct ssl_connect_data *connssl = &conn->ssl[FIRSTSOCKET]; |
| |
| if(!numsocks) |
| return GETSOCK_BLANK; |
| |
| if(connssl->connecting_state == ssl_connect_2_writing) { |
| /* write mode */ |
| socks[0] = conn->sock[FIRSTSOCKET]; |
| return GETSOCK_WRITESOCK(0); |
| } |
| else if(connssl->connecting_state == ssl_connect_2_reading) { |
| /* read mode */ |
| socks[0] = conn->sock[FIRSTSOCKET]; |
| return GETSOCK_READSOCK(0); |
| } |
| } |
| return CURLE_OK; |
| } |
| #else |
| #ifdef USE_GNUTLS |
| static int https_getsock(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks) |
| { |
| (void)conn; |
| (void)socks; |
| (void)numsocks; |
| return GETSOCK_BLANK; |
| } |
| #else |
| #ifdef USE_NSS |
| static int https_getsock(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks) |
| { |
| (void)conn; |
| (void)socks; |
| (void)numsocks; |
| return GETSOCK_BLANK; |
| } |
| #else |
| #ifdef USE_QSOSSL |
| static int https_getsock(struct connectdata *conn, |
| curl_socket_t *socks, |
| int numsocks) |
| { |
| (void)conn; |
| (void)socks; |
| (void)numsocks; |
| return GETSOCK_BLANK; |
| } |
| #endif |
| #endif |
| #endif |
| #endif |
| |
| /* |
| * Curl_http_done() gets called from Curl_done() after a single HTTP request |
| * has been performed. |
| */ |
| |
| CURLcode Curl_http_done(struct connectdata *conn, |
| CURLcode status, bool premature) |
| { |
| struct SessionHandle *data = conn->data; |
| struct HTTP *http =data->state.proto.http; |
| (void)premature; /* not used */ |
| |
| Curl_unencode_cleanup(conn); |
| |
| /* set the proper values (possibly modified on POST) */ |
| conn->fread_func = data->set.fread_func; /* restore */ |
| conn->fread_in = data->set.in; /* restore */ |
| conn->seek_func = data->set.seek_func; /* restore */ |
| conn->seek_client = data->set.seek_client; /* restore */ |
| |
| if(http == NULL) |
| return CURLE_OK; |
| |
| if(http->send_buffer) { |
| send_buffer *buff = http->send_buffer; |
| |
| free(buff->buffer); |
| free(buff); |
| http->send_buffer = NULL; /* clear the pointer */ |
| } |
| |
| if(HTTPREQ_POST_FORM == data->set.httpreq) { |
| data->req.bytecount = http->readbytecount + http->writebytecount; |
| |
| Curl_formclean(&http->sendit); /* Now free that whole lot */ |
| if(http->form.fp) { |
| /* a file being uploaded was left opened, close it! */ |
| fclose(http->form.fp); |
| http->form.fp = NULL; |
| } |
| } |
| else if(HTTPREQ_PUT == data->set.httpreq) |
| data->req.bytecount = http->readbytecount + http->writebytecount; |
| |
| if(status != CURLE_OK) |
| return (status); |
| |
| if(!premature && /* this check is pointless when DONE is called before the |
| entire operation is complete */ |
| !conn->bits.retry && |
| ((http->readbytecount + |
| data->req.headerbytecount - |
| data->req.deductheadercount)) <= 0) { |
| /* If this connection isn't simply closed to be retried, AND nothing was |
| read from the HTTP server (that counts), this can't be right so we |
| return an error here */ |
| failf(data, "Empty reply from server"); |
| return CURLE_GOT_NOTHING; |
| } |
| |
| return CURLE_OK; |
| } |
| |
| |
| /* Determine if we should use HTTP 1.1 for this request. Reasons to avoid it |
| are if the user specifically requested HTTP 1.0, if the server we are |
| connected to only supports 1.0, or if any server previously contacted to |
| handle this request only supports 1.0. */ |
| static bool use_http_1_1(const struct SessionHandle *data, |
| const struct connectdata *conn) |
| { |
| return (bool)((data->set.httpversion == CURL_HTTP_VERSION_1_1) || |
| ((data->set.httpversion != CURL_HTTP_VERSION_1_0) && |
| ((conn->httpversion == 11) || |
| ((conn->httpversion != 10) && |
| (data->state.httpversion != 10))))); |
| } |
| |
| /* check and possibly add an Expect: header */ |
| static CURLcode expect100(struct SessionHandle *data, |
| struct connectdata *conn, |
| send_buffer *req_buffer) |
| { |
| CURLcode result = CURLE_OK; |
| data->state.expect100header = FALSE; /* default to false unless it is set |
| to TRUE below */ |
| if(use_http_1_1(data, conn) && !checkheaders(data, "Expect:")) { |
| /* if not doing HTTP 1.0 or disabled explicitly, we add a Expect: |
| 100-continue to the headers which actually speeds up post |
| operations (as there is one packet coming back from the web |
| server) */ |
| result = add_bufferf(req_buffer, |
| "Expect: 100-continue\r\n"); |
| if(result == CURLE_OK) |
| data->state.expect100header = TRUE; |
| } |
| return result; |
| } |
| |
| static CURLcode add_custom_headers(struct connectdata *conn, |
| send_buffer *req_buffer) |
| { |
| char *ptr; |
| struct curl_slist *headers=conn->data->set.headers; |
| |
| while(headers) { |
| ptr = strchr(headers->data, ':'); |
| if(ptr) { |
| /* we require a colon for this to be a true header */ |
| |
| ptr++; /* pass the colon */ |
| while(*ptr && ISSPACE(*ptr)) |
| ptr++; |
| |
| if(*ptr) { |
| /* only send this if the contents was non-blank */ |
| |
| if(conn->allocptr.host && |
| /* a Host: header was sent already, don't pass on any custom Host: |
| header as that will produce *two* in the same request! */ |
| checkprefix("Host:", headers->data)) |
| ; |
| else if(conn->data->set.httpreq == HTTPREQ_POST_FORM && |
| /* this header (extended by formdata.c) is sent later */ |
| checkprefix("Content-Type:", headers->data)) |
| ; |
| else if(conn->bits.authneg && |
| /* while doing auth neg, don't allow the custom length since |
| we will force length zero then */ |
| checkprefix("Content-Length", headers->data)) |
| ; |
| else { |
| CURLcode result = add_bufferf(req_buffer, "%s\r\n", headers->data); |
| if(result) |
| return result; |
| } |
| } |
| } |
| headers = headers->next; |
| } |
| return CURLE_OK; |
| } |
| |
| /* |
| * Curl_http() gets called from the generic Curl_do() function when a HTTP |
| * request is to be performed. This creates and sends a properly constructed |
| * HTTP request. |
| */ |
| CURLcode Curl_http(struct connectdata *conn, bool *done) |
| { |
| struct SessionHandle *data=conn->data; |
| char *buf = data->state.buffer; /* this is a short cut to the buffer */ |
| CURLcode result=CURLE_OK; |
| struct HTTP *http; |
| const char *ppath = data->state.path; |
| bool paste_ftp_userpwd = FALSE; |
| char ftp_typecode[sizeof(";type=?")] = ""; |
| const char *host = conn->host.name; |
| const char *te = ""; /* transfer-encoding */ |
| const char *ptr; |
| const char *request; |
| Curl_HttpReq httpreq = data->set.httpreq; |
| char *addcookies = NULL; |
| curl_off_t included_body = 0; |
| const char *httpstring; |
| send_buffer *req_buffer; |
| curl_off_t postsize; /* off_t type to be able to hold a large file size */ |
| int seekerr = CURL_SEEKFUNC_OK; |
| |
| /* Always consider the DO phase done after this function call, even if there |
| may be parts of the request that is not yet sent, since we can deal with |
| the rest of the request in the PERFORM phase. */ |
| *done = TRUE; |
| |
| /* If there already is a protocol-specific struct allocated for this |
| sessionhandle, deal with it */ |
| Curl_reset_reqproto(conn); |
| |
| if(!data->state.proto.http) { |
| /* Only allocate this struct if we don't already have it! */ |
| |
| http = calloc(sizeof(struct HTTP), 1); |
| if(!http) |
| return CURLE_OUT_OF_MEMORY; |
| data->state.proto.http = http; |
| } |
| else |
| http = data->state.proto.http; |
| |
| if(!data->state.this_is_a_follow) { |
| /* this is not a followed location, get the original host name */ |
| if(data->state.first_host) |
| /* Free to avoid leaking memory on multiple requests*/ |
| free(data->state.first_host); |
| |
| data->state.first_host = strdup(conn->host.name); |
| if(!data->state.first_host) |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| if( (conn->protocol&(PROT_HTTP|PROT_FTP)) && |
| data->set.upload) { |
| httpreq = HTTPREQ_PUT; |
| } |
| |
| /* Now set the 'request' pointer to the proper request string */ |
| if(data->set.str[STRING_CUSTOMREQUEST]) |
| request = data->set.str[STRING_CUSTOMREQUEST]; |
| else { |
| if(data->set.opt_no_body) |
| request = "HEAD"; |
| else { |
| DEBUGASSERT((httpreq > HTTPREQ_NONE) && (httpreq < HTTPREQ_LAST)); |
| switch(httpreq) { |
| case HTTPREQ_POST: |
| case HTTPREQ_POST_FORM: |
| request = "POST"; |
| break; |
| case HTTPREQ_PUT: |
| request = "PUT"; |
| break; |
| default: /* this should never happen */ |
| case HTTPREQ_GET: |
| request = "GET"; |
| break; |
| case HTTPREQ_HEAD: |
| request = "HEAD"; |
| break; |
| } |
| } |
| } |
| |
| /* The User-Agent string might have been allocated in url.c already, because |
| it might have been used in the proxy connect, but if we have got a header |
| with the user-agent string specified, we erase the previously made string |
| here. */ |
| if(checkheaders(data, "User-Agent:") && conn->allocptr.uagent) { |
| free(conn->allocptr.uagent); |
| conn->allocptr.uagent=NULL; |
| } |
| |
| /* setup the authentication headers */ |
| result = http_output_auth(conn, request, ppath, FALSE); |
| if(result) |
| return result; |
| |
| if((data->state.authhost.multi || data->state.authproxy.multi) && |
| (httpreq != HTTPREQ_GET) && |
| (httpreq != HTTPREQ_HEAD)) { |
| /* Auth is required and we are not authenticated yet. Make a PUT or POST |
| with content-length zero as a "probe". */ |
| conn->bits.authneg = TRUE; |
| } |
| else |
| conn->bits.authneg = FALSE; |
| |
| Curl_safefree(conn->allocptr.ref); |
| if(data->change.referer && !checkheaders(data, "Referer:")) |
| conn->allocptr.ref = aprintf("Referer: %s\r\n", data->change.referer); |
| else |
| conn->allocptr.ref = NULL; |
| |
| if(data->set.str[STRING_COOKIE] && !checkheaders(data, "Cookie:")) |
| addcookies = data->set.str[STRING_COOKIE]; |
| |
| if(!checkheaders(data, "Accept-Encoding:") && |
| data->set.str[STRING_ENCODING]) { |
| Curl_safefree(conn->allocptr.accept_encoding); |
| conn->allocptr.accept_encoding = |
| aprintf("Accept-Encoding: %s\r\n", data->set.str[STRING_ENCODING]); |
| if(!conn->allocptr.accept_encoding) |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| ptr = checkheaders(data, "Transfer-Encoding:"); |
| if(ptr) { |
| /* Some kind of TE is requested, check if 'chunked' is chosen */ |
| data->req.upload_chunky = |
| Curl_compareheader(ptr, "Transfer-Encoding:", "chunked"); |
| } |
| else { |
| if((conn->protocol&PROT_HTTP) && |
| data->set.upload && |
| (data->set.infilesize == -1)) { |
| if (use_http_1_1(data, conn)) { |
| /* HTTP, upload, unknown file size and not HTTP 1.0 */ |
| data->req.upload_chunky = TRUE; |
| } else { |
| failf(data, "Chunky upload is not supported by HTTP 1.0"); |
| return CURLE_UPLOAD_FAILED; |
| } |
| } |
| else { |
| /* else, no chunky upload */ |
| data->req.upload_chunky = FALSE; |
| } |
| |
| if(data->req.upload_chunky) |
| te = "Transfer-Encoding: chunked\r\n"; |
| } |
| |
| Curl_safefree(conn->allocptr.host); |
| |
| ptr = checkheaders(data, "Host:"); |
| if(ptr && (!data->state.this_is_a_follow || |
| Curl_raw_equal(data->state.first_host, conn->host.name))) { |
| #if !defined(CURL_DISABLE_COOKIES) |
| /* If we have a given custom Host: header, we extract the host name in |
| order to possibly use it for cookie reasons later on. We only allow the |
| custom Host: header if this is NOT a redirect, as setting Host: in the |
| redirected request is being out on thin ice. Except if the host name |
| is the same as the first one! */ |
| char *cookiehost = Curl_copy_header_value(ptr); |
| if (!cookiehost) |
| return CURLE_OUT_OF_MEMORY; |
| if (!*cookiehost) |
| /* ignore empty data */ |
| free(cookiehost); |
| else { |
| char *colon = strchr(cookiehost, ':'); |
| if (colon) |
| *colon = 0; /* The host must not include an embedded port number */ |
| Curl_safefree(conn->allocptr.cookiehost); |
| conn->allocptr.cookiehost = cookiehost; |
| } |
| #endif |
| |
| conn->allocptr.host = NULL; |
| } |
| else { |
| /* When building Host: headers, we must put the host name within |
| [brackets] if the host name is a plain IPv6-address. RFC2732-style. */ |
| |
| if(((conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTPS)) || |
| (!(conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTP)) ) |
| /* if(HTTPS on port 443) OR (non-HTTPS on port 80) then don't include |
| the port number in the host string */ |
| conn->allocptr.host = aprintf("Host: %s%s%s\r\n", |
| conn->bits.ipv6_ip?"[":"", |
| host, |
| conn->bits.ipv6_ip?"]":""); |
| else |
| conn->allocptr.host = aprintf("Host: %s%s%s:%d\r\n", |
| conn->bits.ipv6_ip?"[":"", |
| host, |
| conn->bits.ipv6_ip?"]":"", |
| conn->remote_port); |
| |
| if(!conn->allocptr.host) |
| /* without Host: we can't make a nice request */ |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| #ifndef CURL_DISABLE_PROXY |
| if(conn->bits.httpproxy && !conn->bits.tunnel_proxy) { |
| /* Using a proxy but does not tunnel through it */ |
| |
| /* The path sent to the proxy is in fact the entire URL. But if the remote |
| host is a IDN-name, we must make sure that the request we produce only |
| uses the encoded host name! */ |
| if(conn->host.dispname != conn->host.name) { |
| char *url = data->change.url; |
| ptr = strstr(url, conn->host.dispname); |
| if(ptr) { |
| /* This is where the display name starts in the URL, now replace this |
| part with the encoded name. TODO: This method of replacing the host |
| name is rather crude as I believe there's a slight risk that the |
| user has entered a user name or password that contain the host name |
| string. */ |
| size_t currlen = strlen(conn->host.dispname); |
| size_t newlen = strlen(conn->host.name); |
| size_t urllen = strlen(url); |
| |
| char *newurl; |
| |
| newurl = malloc(urllen + newlen - currlen + 1); |
| if(newurl) { |
| /* copy the part before the host name */ |
| memcpy(newurl, url, ptr - url); |
| /* append the new host name instead of the old */ |
| memcpy(newurl + (ptr - url), conn->host.name, newlen); |
| /* append the piece after the host name */ |
| memcpy(newurl + newlen + (ptr - url), |
| ptr + currlen, /* copy the trailing zero byte too */ |
| urllen - (ptr-url) - currlen + 1); |
| if(data->change.url_alloc) |
| free(data->change.url); |
| data->change.url = newurl; |
| data->change.url_alloc = TRUE; |
| } |
| else |
| return CURLE_OUT_OF_MEMORY; |
| } |
| } |
| ppath = data->change.url; |
| if(checkprefix("ftp://", ppath)) { |
| if (data->set.proxy_transfer_mode) { |
| /* when doing ftp, append ;type=<a|i> if not present */ |
| char *p = strstr(ppath, ";type="); |
| if(p && p[6] && p[7] == 0) { |
| switch (Curl_raw_toupper(p[6])) { |
| case 'A': |
| case 'D': |
| case 'I': |
| break; |
| default: |
| p = NULL; |
| } |
| } |
| if(!p) |
| snprintf(ftp_typecode, sizeof(ftp_typecode), ";type=%c", |
| data->set.prefer_ascii ? 'a' : 'i'); |
| } |
| if (conn->bits.user_passwd && !conn->bits.userpwd_in_url) |
| paste_ftp_userpwd = TRUE; |
| } |
| } |
| #endif /* CURL_DISABLE_PROXY */ |
| |
| if(HTTPREQ_POST_FORM == httpreq) { |
| /* we must build the whole darned post sequence first, so that we have |
| a size of the whole shebang before we start to send it */ |
| result = Curl_getFormData(&http->sendit, data->set.httppost, |
| checkheaders(data, "Content-Type:"), |
| &http->postsize); |
| if(CURLE_OK != result) { |
| /* Curl_getFormData() doesn't use failf() */ |
| failf(data, "failed creating formpost data"); |
| return result; |
| } |
| } |
| |
| |
| http->p_accept = checkheaders(data, "Accept:")?NULL:"Accept: */*\r\n"; |
| |
| if(( (HTTPREQ_POST == httpreq) || |
| (HTTPREQ_POST_FORM == httpreq) || |
| (HTTPREQ_PUT == httpreq) ) && |
| data->state.resume_from) { |
| /********************************************************************** |
| * Resuming upload in HTTP means that we PUT or POST and that we have |
| * got a resume_from value set. The resume value has already created |
| * a Range: header that will be passed along. We need to "fast forward" |
| * the file the given number of bytes and decrease the assume upload |
| * file size before we continue this venture in the dark lands of HTTP. |
| *********************************************************************/ |
| |
| if(data->state.resume_from < 0 ) { |
| /* |
| * This is meant to get the size of the present remote-file by itself. |
| * We don't support this now. Bail out! |
| */ |
| data->state.resume_from = 0; |
| } |
| |
| if(data->state.resume_from && !data->state.this_is_a_follow) { |
| /* do we still game? */ |
| |
| /* Now, let's read off the proper amount of bytes from the |
| input. */ |
| if(conn->seek_func) { |
| seekerr = conn->seek_func(conn->seek_client, data->state.resume_from, |
| SEEK_SET); |
| } |
| |
| if(seekerr != CURL_SEEKFUNC_OK) { |
| if(seekerr != CURL_SEEKFUNC_CANTSEEK) { |
| failf(data, "Could not seek stream"); |
| return CURLE_READ_ERROR; |
| } |
| /* when seekerr == CURL_SEEKFUNC_CANTSEEK (can't seek to offset) */ |
| else { |
| curl_off_t passed=0; |
| |
| do { |
| size_t readthisamountnow = (size_t)(data->state.resume_from - |
| passed); |
| size_t actuallyread; |
| |
| if(readthisamountnow > BUFSIZE) |
| readthisamountnow = BUFSIZE; |
| |
| actuallyread = data->set.fread_func(data->state.buffer, 1, |
| (size_t)readthisamountnow, |
| data->set.in); |
| |
| passed += actuallyread; |
| if(actuallyread != readthisamountnow) { |
| failf(data, "Could only read %" FORMAT_OFF_T |
| " bytes from the input", |
| passed); |
| return CURLE_READ_ERROR; |
| } |
| } while(passed != data->state.resume_from); /* loop until done */ |
| } |
| } |
| |
| /* now, decrease the size of the read */ |
| if(data->set.infilesize>0) { |
| data->set.infilesize -= data->state.resume_from; |
| |
| if(data->set.infilesize <= 0) { |
| failf(data, "File already completely uploaded"); |
| return CURLE_PARTIAL_FILE; |
| } |
| } |
| /* we've passed, proceed as normal */ |
| } |
| } |
| if(data->state.use_range) { |
| /* |
| * A range is selected. We use different headers whether we're downloading |
| * or uploading and we always let customized headers override our internal |
| * ones if any such are specified. |
| */ |
| if(((httpreq == HTTPREQ_GET) || (httpreq == HTTPREQ_HEAD)) && |
| !checkheaders(data, "Range:")) { |
| /* if a line like this was already allocated, free the previous one */ |
| if(conn->allocptr.rangeline) |
| free(conn->allocptr.rangeline); |
| conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", |
| data->state.range); |
| } |
| else if((httpreq != HTTPREQ_GET) && |
| !checkheaders(data, "Content-Range:")) { |
| |
| /* if a line like this was already allocated, free the previous one */ |
| if(conn->allocptr.rangeline) |
| free(conn->allocptr.rangeline); |
| |
| if(data->set.set_resume_from < 0) { |
| /* Upload resume was asked for, but we don't know the size of the |
| remote part so we tell the server (and act accordingly) that we |
| upload the whole file (again) */ |
| conn->allocptr.rangeline = |
| aprintf("Content-Range: bytes 0-%" FORMAT_OFF_T |
| "/%" FORMAT_OFF_T "\r\n", |
| data->set.infilesize - 1, data->set.infilesize); |
| |
| } |
| else if(data->state.resume_from) { |
| /* This is because "resume" was selected */ |
| curl_off_t total_expected_size= |
| data->state.resume_from + data->set.infilesize; |
| conn->allocptr.rangeline = |
| aprintf("Content-Range: bytes %s%" FORMAT_OFF_T |
| "/%" FORMAT_OFF_T "\r\n", |
| data->state.range, total_expected_size-1, |
| total_expected_size); |
| } |
| else { |
| /* Range was selected and then we just pass the incoming range and |
| append total size */ |
| conn->allocptr.rangeline = |
| aprintf("Content-Range: bytes %s/%" FORMAT_OFF_T "\r\n", |
| data->state.range, data->set.infilesize); |
| } |
| if(!conn->allocptr.rangeline) |
| return CURLE_OUT_OF_MEMORY; |
| } |
| } |
| |
| /* Use 1.1 unless the user specifically asked for 1.0 or the server only |
| supports 1.0 */ |
| httpstring= use_http_1_1(data, conn)?"1.1":"1.0"; |
| |
| /* initialize a dynamic send-buffer */ |
| req_buffer = add_buffer_init(); |
| |
| if(!req_buffer) |
| return CURLE_OUT_OF_MEMORY; |
| |
| /* add the main request stuff */ |
| /* GET/HEAD/POST/PUT */ |
| result = add_bufferf(req_buffer, "%s ", request); |
| if (result) |
| return result; |
| |
| /* url */ |
| if (paste_ftp_userpwd) |
| result = add_bufferf(req_buffer, "ftp://%s:%s@%s", |
| conn->user, conn->passwd, ppath + sizeof("ftp://") - 1); |
| else |
| result = add_buffer(req_buffer, ppath, strlen(ppath)); |
| if (result) |
| return result; |
| |
| result = add_bufferf(req_buffer, |
| "%s" /* ftp typecode (;type=x) */ |
| " HTTP/%s\r\n" /* HTTP version */ |
| "%s" /* proxyuserpwd */ |
| "%s" /* userpwd */ |
| "%s" /* range */ |
| "%s" /* user agent */ |
| "%s" /* host */ |
| "%s" /* accept */ |
| "%s" /* accept-encoding */ |
| "%s" /* referer */ |
| "%s" /* Proxy-Connection */ |
| "%s",/* transfer-encoding */ |
| |
| ftp_typecode, |
| httpstring, |
| conn->allocptr.proxyuserpwd? |
| conn->allocptr.proxyuserpwd:"", |
| conn->allocptr.userpwd?conn->allocptr.userpwd:"", |
| (data->state.use_range && conn->allocptr.rangeline)? |
| conn->allocptr.rangeline:"", |
| (data->set.str[STRING_USERAGENT] && |
| *data->set.str[STRING_USERAGENT] && conn->allocptr.uagent)? |
| conn->allocptr.uagent:"", |
| (conn->allocptr.host?conn->allocptr.host:""), /* Host: host */ |
| http->p_accept?http->p_accept:"", |
| (data->set.str[STRING_ENCODING] && |
| *data->set.str[STRING_ENCODING] && |
| conn->allocptr.accept_encoding)? |
| conn->allocptr.accept_encoding:"", |
| (data->change.referer && conn->allocptr.ref)? |
| conn->allocptr.ref:"" /* Referer: <data> */, |
| (conn->bits.httpproxy && |
| !conn->bits.tunnel_proxy && |
| !checkheaders(data, "Proxy-Connection:"))? |
| "Proxy-Connection: Keep-Alive\r\n":"", |
| te |
| ); |
| |
| /* |
| * Free userpwd now --- cannot reuse this for Negotiate and possibly NTLM |
| * with basic and digest, it will be freed anyway by the next request |
| */ |
| |
| Curl_safefree (conn->allocptr.userpwd); |
| conn->allocptr.userpwd = NULL; |
| |
| if(result) |
| return result; |
| |
| #if !defined(CURL_DISABLE_COOKIES) |
| if(data->cookies || addcookies) { |
| struct Cookie *co=NULL; /* no cookies from start */ |
| int count=0; |
| |
| if(data->cookies) { |
| Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE); |
| co = Curl_cookie_getlist(data->cookies, |
| conn->allocptr.cookiehost? |
| conn->allocptr.cookiehost:host, |
| data->state.path, |
| (bool)(conn->protocol&PROT_HTTPS?TRUE:FALSE)); |
| Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); |
| } |
| if(co) { |
| struct Cookie *store=co; |
| /* now loop through all cookies that matched */ |
| while(co) { |
| if(co->value) { |
| if(0 == count) { |
| result = add_bufferf(req_buffer, "Cookie: "); |
| if(result) |
| break; |
| } |
| result = add_bufferf(req_buffer, |
| "%s%s=%s", count?"; ":"", |
| co->name, co->value); |
| if(result) |
| break; |
| count++; |
| } |
| co = co->next; /* next cookie please */ |
| } |
| Curl_cookie_freelist(store, FALSE); /* free the cookie list */ |
| } |
| if(addcookies && (CURLE_OK == result)) { |
| if(!count) |
| result = add_bufferf(req_buffer, "Cookie: "); |
| if(CURLE_OK == result) { |
| result = add_bufferf(req_buffer, "%s%s", |
| count?"; ":"", |
| addcookies); |
| count++; |
| } |
| } |
| if(count && (CURLE_OK == result)) |
| result = add_buffer(req_buffer, "\r\n", 2); |
| |
| if(result) |
| return result; |
| } |
| #endif |
| |
| if(data->set.timecondition) { |
| struct tm *tm; |
| |
| /* The If-Modified-Since header family should have their times set in |
| * GMT as RFC2616 defines: "All HTTP date/time stamps MUST be |
| * represented in Greenwich Mean Time (GMT), without exception. For the |
| * purposes of HTTP, GMT is exactly equal to UTC (Coordinated Universal |
| * Time)." (see page 20 of RFC2616). |
| */ |
| |
| #ifdef HAVE_GMTIME_R |
| /* thread-safe version */ |
| struct tm keeptime; |
| tm = (struct tm *)gmtime_r(&data->set.timevalue, &keeptime); |
| #else |
| tm = gmtime(&data->set.timevalue); |
| #endif |
| |
| /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */ |
| snprintf(buf, BUFSIZE-1, |
| "%s, %02d %s %4d %02d:%02d:%02d GMT", |
| Curl_wkday[tm->tm_wday?tm->tm_wday-1:6], |
| tm->tm_mday, |
| Curl_month[tm->tm_mon], |
| tm->tm_year + 1900, |
| tm->tm_hour, |
| tm->tm_min, |
| tm->tm_sec); |
| |
| switch(data->set.timecondition) { |
| case CURL_TIMECOND_IFMODSINCE: |
| default: |
| result = add_bufferf(req_buffer, |
| "If-Modified-Since: %s\r\n", buf); |
| break; |
| case CURL_TIMECOND_IFUNMODSINCE: |
| result = add_bufferf(req_buffer, |
| "If-Unmodified-Since: %s\r\n", buf); |
| break; |
| case CURL_TIMECOND_LASTMOD: |
| result = add_bufferf(req_buffer, |
| "Last-Modified: %s\r\n", buf); |
| break; |
| } |
| if(result) |
| return result; |
| } |
| |
| result = add_custom_headers(conn, req_buffer); |
| if(result) |
| return result; |
| |
| http->postdata = NULL; /* nothing to post at this point */ |
| Curl_pgrsSetUploadSize(data, 0); /* upload size is 0 atm */ |
| |
| /* If 'authdone' is FALSE, we must not set the write socket index to the |
| Curl_transfer() call below, as we're not ready to actually upload any |
| data yet. */ |
| |
| switch(httpreq) { |
| |
| case HTTPREQ_POST_FORM: |
| if(!http->sendit || conn->bits.authneg) { |
| /* nothing to post! */ |
| result = add_bufferf(req_buffer, "Content-Length: 0\r\n\r\n"); |
| if(result) |
| return result; |
| |
| result = add_buffer_send(req_buffer, conn, |
| &data->info.request_size, 0, FIRSTSOCKET); |
| if(result) |
| failf(data, "Failed sending POST request"); |
| else |
| /* setup variables for the upcoming transfer */ |
| result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, |
| &http->readbytecount, |
| -1, NULL); |
| break; |
| } |
| |
| if(Curl_FormInit(&http->form, http->sendit)) { |
| failf(data, "Internal HTTP POST error!"); |
| return CURLE_HTTP_POST_ERROR; |
| } |
| |
| /* Get the currently set callback function pointer and store that in the |
| form struct since we might want the actual user-provided callback later |
| on. The conn->fread_func pointer itself will be changed for the |
| multipart case to the function that returns a multipart formatted |
| stream. */ |
| http->form.fread_func = conn->fread_func; |
| |
| /* Set the read function to read from the generated form data */ |
| conn->fread_func = (curl_read_callback)Curl_FormReader; |
| conn->fread_in = &http->form; |
| |
| http->sending = HTTPSEND_BODY; |
| |
| if(!data->req.upload_chunky) { |
| /* only add Content-Length if not uploading chunked */ |
| result = add_bufferf(req_buffer, |
| "Content-Length: %" FORMAT_OFF_T "\r\n", |
| http->postsize); |
| if(result) |
| return result; |
| } |
| |
| result = expect100(data, conn, req_buffer); |
| if(result) |
| return result; |
| |
| { |
| |
| /* Get Content-Type: line from Curl_formpostheader. |
| */ |
| char *contentType; |
| size_t linelength=0; |
| contentType = Curl_formpostheader((void *)&http->form, |
| &linelength); |
| if(!contentType) { |
| failf(data, "Could not get Content-Type header line!"); |
| return CURLE_HTTP_POST_ERROR; |
| } |
| |
| result = add_buffer(req_buffer, contentType, linelength); |
| if(result) |
| return result; |
| } |
| |
| /* make the request end in a true CRLF */ |
| result = add_buffer(req_buffer, "\r\n", 2); |
| if(result) |
| return result; |
| |
| /* set upload size to the progress meter */ |
| Curl_pgrsSetUploadSize(data, http->postsize); |
| |
| /* fire away the whole request to the server */ |
| result = add_buffer_send(req_buffer, conn, |
| &data->info.request_size, 0, FIRSTSOCKET); |
| if(result) |
| failf(data, "Failed sending POST request"); |
| else |
| /* setup variables for the upcoming transfer */ |
| result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, |
| &http->readbytecount, |
| FIRSTSOCKET, |
| &http->writebytecount); |
| |
| if(result) { |
| Curl_formclean(&http->sendit); /* free that whole lot */ |
| return result; |
| } |
| #ifdef CURL_DOES_CONVERSIONS |
| /* time to convert the form data... */ |
| result = Curl_formconvert(data, http->sendit); |
| if(result) { |
| Curl_formclean(&http->sendit); /* free that whole lot */ |
| return result; |
| } |
| #endif /* CURL_DOES_CONVERSIONS */ |
| break; |
| |
| case HTTPREQ_PUT: /* Let's PUT the data to the server! */ |
| |
| if(conn->bits.authneg) |
| postsize = 0; |
| else |
| postsize = data->set.infilesize; |
| |
| if((postsize != -1) && !data->req.upload_chunky) { |
| /* only add Content-Length if not uploading chunked */ |
| result = add_bufferf(req_buffer, |
| "Content-Length: %" FORMAT_OFF_T "\r\n", |
| postsize ); |
| if(result) |
| return result; |
| } |
| |
| result = expect100(data, conn, req_buffer); |
| if(result) |
| return result; |
| |
| result = add_buffer(req_buffer, "\r\n", 2); /* end of headers */ |
| if(result) |
| return result; |
| |
| /* set the upload size to the progress meter */ |
| Curl_pgrsSetUploadSize(data, postsize); |
| |
| /* this sends the buffer and frees all the buffer resources */ |
| result = add_buffer_send(req_buffer, conn, |
| &data->info.request_size, 0, FIRSTSOCKET); |
| if(result) |
| failf(data, "Failed sending PUT request"); |
| else |
| /* prepare for transfer */ |
| result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, |
| &http->readbytecount, |
| postsize?FIRSTSOCKET:-1, |
| postsize?&http->writebytecount:NULL); |
| if(result) |
| return result; |
| break; |
| |
| case HTTPREQ_POST: |
| /* this is the simple POST, using x-www-form-urlencoded style */ |
| |
| if(conn->bits.authneg) |
| postsize = 0; |
| else { |
| /* figure out the size of the postfields */ |
| postsize = (data->set.postfieldsize != -1)? |
| data->set.postfieldsize: |
| (data->set.postfields? (curl_off_t)strlen(data->set.postfields):0); |
| } |
| if(!data->req.upload_chunky) { |
| /* We only set Content-Length and allow a custom Content-Length if |
| we don't upload data chunked, as RFC2616 forbids us to set both |
| kinds of headers (Transfer-Encoding: chunked and Content-Length) */ |
| |
| if(conn->bits.authneg || !checkheaders(data, "Content-Length:")) { |
| /* we allow replacing this header if not during auth negotiation, |
| although it isn't very wise to actually set your own */ |
| result = add_bufferf(req_buffer, |
| "Content-Length: %" FORMAT_OFF_T"\r\n", |
| postsize); |
| if(result) |
| return result; |
| } |
| } |
| |
| if(!checkheaders(data, "Content-Type:")) { |
| result = add_bufferf(req_buffer, |
| "Content-Type: application/x-www-form-urlencoded\r\n"); |
| if(result) |
| return result; |
| } |
| |
| /* For really small posts we don't use Expect: headers at all, and for |
| the somewhat bigger ones we allow the app to disable it. Just make |
| sure that the expect100header is always set to the preferred value |
| here. */ |
| if(postsize > TINY_INITIAL_POST_SIZE) { |
| result = expect100(data, conn, req_buffer); |
| if(result) |
| return result; |
| } |
| else |
| data->state.expect100header = FALSE; |
| |
| if(data->set.postfields) { |
| |
| if(!data->state.expect100header && |
| (postsize < MAX_INITIAL_POST_SIZE)) { |
| /* if we don't use expect: 100 AND |
| postsize is less than MAX_INITIAL_POST_SIZE |
| |
| then append the post data to the HTTP request header. This limit |
| is no magic limit but only set to prevent really huge POSTs to |
| get the data duplicated with malloc() and family. */ |
| |
| result = add_buffer(req_buffer, "\r\n", 2); /* end of headers! */ |
| if(result) |
| return result; |
| |
| if(!data->req.upload_chunky) { |
| /* We're not sending it 'chunked', append it to the request |
| already now to reduce the number if send() calls */ |
| result = add_buffer(req_buffer, data->set.postfields, |
| (size_t)postsize); |
| included_body = postsize; |
| } |
| else { |
| /* Append the POST data chunky-style */ |
| result = add_bufferf(req_buffer, "%x\r\n", (int)postsize); |
| if(CURLE_OK == result) |
| result = add_buffer(req_buffer, data->set.postfields, |
| (size_t)postsize); |
| if(CURLE_OK == result) |
| result = add_buffer(req_buffer, |
| "\x0d\x0a\x30\x0d\x0a\x0d\x0a", 7); |
| /* CR LF 0 CR LF CR LF */ |
| included_body = postsize + 7; |
| } |
| if(result) |
| return result; |
| } |
| else { |
| /* A huge POST coming up, do data separate from the request */ |
| http->postsize = postsize; |
| http->postdata = data->set.postfields; |
| |
| http->sending = HTTPSEND_BODY; |
| |
| conn->fread_func = (curl_read_callback)readmoredata; |
| conn->fread_in = (void *)conn; |
| |
| /* set the upload size to the progress meter */ |
| Curl_pgrsSetUploadSize(data, http->postsize); |
| |
| result = add_buffer(req_buffer, "\r\n", 2); /* end of headers! */ |
| if(result) |
| return result; |
| } |
| } |
| else { |
| result = add_buffer(req_buffer, "\r\n", 2); /* end of headers! */ |
| if(result) |
| return result; |
| |
| if(data->set.postfieldsize) { |
| /* set the upload size to the progress meter */ |
| Curl_pgrsSetUploadSize(data, postsize?postsize:-1); |
| |
| /* set the pointer to mark that we will send the post body using the |
| read callback, but only if we're not in authenticate |
| negotiation */ |
| if(!conn->bits.authneg) { |
| http->postdata = (char *)&http->postdata; |
| http->postsize = postsize; |
| } |
| } |
| } |
| /* issue the request */ |
| result = add_buffer_send(req_buffer, conn, &data->info.request_size, |
| (size_t)included_body, FIRSTSOCKET); |
| |
| if(result) |
| failf(data, "Failed sending HTTP POST request"); |
| else |
| result = |
| Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, |
| &http->readbytecount, |
| http->postdata?FIRSTSOCKET:-1, |
| http->postdata?&http->writebytecount:NULL); |
| break; |
| |
| default: |
| result = add_buffer(req_buffer, "\r\n", 2); |
| if(result) |
| return result; |
| |
| /* issue the request */ |
| result = add_buffer_send(req_buffer, conn, |
| &data->info.request_size, 0, FIRSTSOCKET); |
| |
| if(result) |
| failf(data, "Failed sending HTTP request"); |
| else |
| /* HTTP GET/HEAD download: */ |
| result = Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, |
| &http->readbytecount, |
| http->postdata?FIRSTSOCKET:-1, |
| http->postdata?&http->writebytecount:NULL); |
| } |
| if(result) |
| return result; |
| |
| if(http->writebytecount) { |
| /* if a request-body has been sent off, we make sure this progress is noted |
| properly */ |
| Curl_pgrsSetUploadCounter(data, http->writebytecount); |
| if(Curl_pgrsUpdate(conn)) |
| result = CURLE_ABORTED_BY_CALLBACK; |
| } |
| |
| return result; |
| } |
| #endif |