| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at https://curl.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| * SPDX-License-Identifier: curl |
| * |
| ***************************************************************************/ |
| /* <DESC> |
| * HTTP/2 server push |
| * </DESC> |
| */ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| /* curl stuff */ |
| #include <curl/curl.h> |
| |
| #if defined(_MSC_VER) && (_MSC_VER < 1900) |
| #define snprintf _snprintf |
| #endif |
| |
| #ifndef CURLPIPE_MULTIPLEX |
| #error "too old libcurl, cannot do HTTP/2 server push!" |
| #endif |
| |
| static FILE *out_download; |
| |
| static void dump(const char *text, unsigned char *ptr, size_t size, char nohex) |
| { |
| size_t i; |
| size_t c; |
| |
| unsigned int width = 0x10; |
| |
| if(nohex) |
| /* without the hex output, we can fit more on screen */ |
| width = 0x40; |
| |
| fprintf(stderr, "%s, %lu bytes (0x%lx)\n", |
| text, (unsigned long)size, (unsigned long)size); |
| |
| for(i = 0; i < size; i += width) { |
| |
| fprintf(stderr, "%4.4lx: ", (unsigned long)i); |
| |
| if(!nohex) { |
| /* hex not disabled, show it */ |
| for(c = 0; c < width; c++) |
| if(i + c < size) |
| fprintf(stderr, "%02x ", ptr[i + c]); |
| else |
| fputs(" ", stderr); |
| } |
| |
| for(c = 0; (c < width) && (i + c < size); c++) { |
| /* check for 0D0A; if found, skip past and start a new line of output */ |
| if(nohex && (i + c + 1 < size) && ptr[i + c] == 0x0D && |
| ptr[i + c + 1] == 0x0A) { |
| i += (c + 2 - width); |
| break; |
| } |
| fprintf(stderr, "%c", |
| (ptr[i + c] >= 0x20) && (ptr[i + c] < 0x80) ? ptr[i + c] : '.'); |
| /* check again for 0D0A, to avoid an extra \n if it's at width */ |
| if(nohex && (i + c + 2 < size) && ptr[i + c + 1] == 0x0D && |
| ptr[i + c + 2] == 0x0A) { |
| i += (c + 3 - width); |
| break; |
| } |
| } |
| fputc('\n', stderr); /* newline */ |
| } |
| } |
| |
| static int my_trace(CURL *curl, curl_infotype type, |
| char *data, size_t size, void *userp) |
| { |
| const char *text; |
| (void)curl; |
| (void)userp; |
| switch(type) { |
| case CURLINFO_TEXT: |
| fprintf(stderr, "== Info: %s", data); |
| return 0; |
| case CURLINFO_HEADER_OUT: |
| text = "=> Send header"; |
| break; |
| case CURLINFO_DATA_OUT: |
| text = "=> Send data"; |
| break; |
| case CURLINFO_SSL_DATA_OUT: |
| text = "=> Send SSL data"; |
| break; |
| case CURLINFO_HEADER_IN: |
| text = "<= Recv header"; |
| break; |
| case CURLINFO_DATA_IN: |
| text = "<= Recv data"; |
| break; |
| case CURLINFO_SSL_DATA_IN: |
| text = "<= Recv SSL data"; |
| break; |
| default: /* in case a new one is introduced to shock us */ |
| return 0; |
| } |
| |
| dump(text, (unsigned char *)data, size, 1); |
| return 0; |
| } |
| |
| #define OUTPUTFILE "dl" |
| |
| static int setup(CURL *curl, const char *url) |
| { |
| out_download = fopen(OUTPUTFILE, "wb"); |
| if(!out_download) |
| return 1; /* failed */ |
| |
| /* set the same URL */ |
| curl_easy_setopt(curl, CURLOPT_URL, url); |
| |
| /* HTTP/2 please */ |
| curl_easy_setopt(curl, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_2_0); |
| |
| /* we use a self-signed test server, skip verification during debugging */ |
| curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L); |
| curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L); |
| |
| /* write to this file */ |
| curl_easy_setopt(curl, CURLOPT_WRITEDATA, out_download); |
| |
| /* please be verbose */ |
| curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L); |
| curl_easy_setopt(curl, CURLOPT_DEBUGFUNCTION, my_trace); |
| |
| #if CURLPIPE_MULTIPLEX > 0 |
| /* wait for pipe connection to confirm */ |
| curl_easy_setopt(curl, CURLOPT_PIPEWAIT, 1L); |
| #endif |
| return 0; /* all is good */ |
| } |
| |
| static FILE *out_push; |
| |
| /* called when there is an incoming push */ |
| static int server_push_callback(CURL *parent, |
| CURL *curl, |
| size_t num_headers, |
| struct curl_pushheaders *headers, |
| void *userp) |
| { |
| char *headp; |
| size_t i; |
| int *transfers = (int *)userp; |
| char filename[128]; |
| static unsigned int count = 0; |
| |
| (void)parent; |
| |
| snprintf(filename, sizeof(filename), "push%u", count++); |
| |
| /* here's a new stream, save it in a new file for each new push */ |
| out_push = fopen(filename, "wb"); |
| if(!out_push) { |
| /* if we cannot save it, deny it */ |
| fprintf(stderr, "Failed to create output file for push\n"); |
| return CURL_PUSH_DENY; |
| } |
| |
| /* write to this file */ |
| curl_easy_setopt(curl, CURLOPT_WRITEDATA, out_push); |
| |
| fprintf(stderr, "**** push callback approves stream %u, got %lu headers!\n", |
| count, (unsigned long)num_headers); |
| |
| for(i = 0; i < num_headers; i++) { |
| headp = curl_pushheader_bynum(headers, i); |
| fprintf(stderr, "**** header %lu: %s\n", (unsigned long)i, headp); |
| } |
| |
| headp = curl_pushheader_byname(headers, ":path"); |
| if(headp) { |
| fprintf(stderr, "**** The PATH is %s\n", headp /* skip :path + colon */); |
| } |
| |
| (*transfers)++; /* one more */ |
| |
| return CURL_PUSH_OK; |
| } |
| |
| /* |
| * Download a file over HTTP/2, take care of server push. |
| */ |
| int main(int argc, char *argv[]) |
| { |
| CURLcode res; |
| CURL *curl; |
| CURLM *multi; |
| int transfers = 1; /* we start with one */ |
| const char *url = "https://localhost:8443/index.html"; |
| |
| if(argc == 2) |
| url = argv[1]; |
| |
| res = curl_global_init(CURL_GLOBAL_ALL); |
| if(res) |
| return (int)res; |
| |
| /* init a multi stack */ |
| multi = curl_multi_init(); |
| if(!multi) |
| goto error; |
| |
| curl = curl_easy_init(); |
| |
| /* set options */ |
| if(!curl || setup(curl, url)) { |
| fprintf(stderr, "failed\n"); |
| goto error; |
| } |
| |
| curl_multi_setopt(multi, CURLMOPT_PIPELINING, CURLPIPE_MULTIPLEX); |
| curl_multi_setopt(multi, CURLMOPT_PUSHFUNCTION, server_push_callback); |
| curl_multi_setopt(multi, CURLMOPT_PUSHDATA, &transfers); |
| |
| /* add the easy transfer */ |
| curl_multi_add_handle(multi, curl); |
| |
| do { |
| struct CURLMsg *m; |
| int still_running; /* keep number of running handles */ |
| CURLMcode mc = curl_multi_perform(multi, &still_running); |
| |
| if(still_running) |
| /* wait for activity, timeout or "nothing" */ |
| mc = curl_multi_poll(multi, NULL, 0, 1000, NULL); |
| |
| if(mc) |
| break; |
| |
| /* |
| * A little caution when doing server push is that libcurl itself has |
| * created and added one or more easy handles but we need to clean them up |
| * when we are done. |
| */ |
| do { |
| int msgq = 0; |
| m = curl_multi_info_read(multi, &msgq); |
| if(m && (m->msg == CURLMSG_DONE)) { |
| curl = m->easy_handle; |
| transfers--; |
| curl_multi_remove_handle(multi, curl); |
| curl_easy_cleanup(curl); |
| } |
| } while(m); |
| |
| } while(transfers); /* as long as we have transfers going */ |
| |
| error: |
| |
| if(multi) |
| curl_multi_cleanup(multi); |
| |
| curl_global_cleanup(); |
| |
| fclose(out_download); |
| if(out_push) |
| fclose(out_push); |
| |
| return 0; |
| } |