| #.rst: |
| # GNUInstallDirs |
| # -------------- |
| # |
| # Define GNU standard installation directories |
| # |
| # Provides install directory variables as defined for GNU software: |
| # |
| # http://www.gnu.org/prep/standards/html_node/Directory-Variables.html |
| # |
| # Inclusion of this module defines the following variables: |
| # |
| # ``CMAKE_INSTALL_<dir>`` |
| # destination for files of a given type |
| # ``CMAKE_INSTALL_FULL_<dir>`` |
| # corresponding absolute path |
| # |
| # where <dir> is one of: |
| # |
| # ``BINDIR`` |
| # user executables (bin) |
| # ``SBINDIR`` |
| # system admin executables (sbin) |
| # ``LIBEXECDIR`` |
| # program executables (libexec) |
| # ``SYSCONFDIR`` |
| # read-only single-machine data (etc) |
| # ``SHAREDSTATEDIR`` |
| # modifiable architecture-independent data (com) |
| # ``LOCALSTATEDIR`` |
| # modifiable single-machine data (var) |
| # ``LIBDIR`` |
| # object code libraries (lib or lib64 or lib/<multiarch-tuple> on Debian) |
| # ``INCLUDEDIR`` |
| # C header files (include) |
| # ``OLDINCLUDEDIR`` |
| # C header files for non-gcc (/usr/include) |
| # ``DATAROOTDIR`` |
| # read-only architecture-independent data root (share) |
| # ``DATADIR`` |
| # read-only architecture-independent data (DATAROOTDIR) |
| # ``INFODIR`` |
| # info documentation (DATAROOTDIR/info) |
| # ``LOCALEDIR`` |
| # locale-dependent data (DATAROOTDIR/locale) |
| # ``MANDIR`` |
| # man documentation (DATAROOTDIR/man) |
| # ``DOCDIR`` |
| # documentation root (DATAROOTDIR/doc/PROJECT_NAME) |
| # |
| # Each CMAKE_INSTALL_<dir> value may be passed to the DESTINATION |
| # options of install() commands for the corresponding file type. If the |
| # includer does not define a value the above-shown default will be used |
| # and the value will appear in the cache for editing by the user. Each |
| # CMAKE_INSTALL_FULL_<dir> value contains an absolute path constructed |
| # from the corresponding destination by prepending (if necessary) the |
| # value of CMAKE_INSTALL_PREFIX. |
| |
| #============================================================================= |
| # Copyright 2011 Nikita Krupen'ko <krnekit@gmail.com> |
| # Copyright 2011 Kitware, Inc. |
| # |
| # Distributed under the OSI-approved BSD License (the "License"); |
| # see accompanying file Copyright.txt for details. |
| # |
| # This software is distributed WITHOUT ANY WARRANTY; without even the |
| # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| # See the License for more information. |
| #============================================================================= |
| # (To distribute this file outside of CMake, substitute the full |
| # License text for the above reference.) |
| |
| # Installation directories |
| # |
| if(NOT DEFINED CMAKE_INSTALL_BINDIR) |
| set(CMAKE_INSTALL_BINDIR "bin" CACHE PATH "user executables (bin)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_SBINDIR) |
| set(CMAKE_INSTALL_SBINDIR "sbin" CACHE PATH "system admin executables (sbin)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_LIBEXECDIR) |
| set(CMAKE_INSTALL_LIBEXECDIR "libexec" CACHE PATH "program executables (libexec)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_SYSCONFDIR) |
| set(CMAKE_INSTALL_SYSCONFDIR "etc" CACHE PATH "read-only single-machine data (etc)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_SHAREDSTATEDIR) |
| set(CMAKE_INSTALL_SHAREDSTATEDIR "com" CACHE PATH "modifiable architecture-independent data (com)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_LOCALSTATEDIR) |
| set(CMAKE_INSTALL_LOCALSTATEDIR "var" CACHE PATH "modifiable single-machine data (var)") |
| endif() |
| |
| # We check if the variable was manually set and not cached, in order to |
| # allow projects to set the values as normal variables before including |
| # GNUInstallDirs to avoid having the entries cached or user-editable. It |
| # replaces the "if(NOT DEFINED CMAKE_INSTALL_XXX)" checks in all the |
| # other cases. |
| # If CMAKE_INSTALL_LIBDIR is defined, if _libdir_set is false, then the |
| # variable is a normal one, otherwise it is a cache one. |
| get_property(_libdir_set CACHE CMAKE_INSTALL_LIBDIR PROPERTY TYPE SET) |
| if(NOT DEFINED CMAKE_INSTALL_LIBDIR OR (_libdir_set |
| AND DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX |
| AND NOT "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" STREQUAL "${CMAKE_INSTALL_PREFIX}")) |
| # If CMAKE_INSTALL_LIBDIR is not defined, it is always executed. |
| # Otherwise: |
| # * if _libdir_set is false it is not executed (meaning that it is |
| # not a cache variable) |
| # * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is not defined it is |
| # not executed |
| # * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX and |
| # CMAKE_INSTALL_PREFIX are the same string it is not executed. |
| # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is updated after the |
| # execution, of this part of code, therefore at the next inclusion |
| # of the file, CMAKE_INSTALL_LIBDIR is defined, and the 2 strings |
| # are equal, meaning that the if is not executed the code the |
| # second time. |
| |
| set(_LIBDIR_DEFAULT "lib") |
| # Override this default 'lib' with 'lib64' iff: |
| # - we are on Linux system but NOT cross-compiling |
| # - we are NOT on debian |
| # - we are on a 64 bits system |
| # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf |
| # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if |
| # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu" |
| # and CMAKE_INSTALL_PREFIX is "/usr" |
| # See http://wiki.debian.org/Multiarch |
| if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX) |
| set(__LAST_LIBDIR_DEFAULT "lib") |
| # __LAST_LIBDIR_DEFAULT is the default value that we compute from |
| # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX, not a cache entry for |
| # the value that was last used as the default. |
| # This value is used to figure out whether the user changed the |
| # CMAKE_INSTALL_LIBDIR value manually, or if the value was the |
| # default one. When CMAKE_INSTALL_PREFIX changes, the value is |
| # updated to the new default, unless the user explicitly changed it. |
| endif() |
| if(CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$" |
| AND NOT CMAKE_CROSSCOMPILING) |
| if (EXISTS "/etc/debian_version") # is this a debian system ? |
| if(CMAKE_LIBRARY_ARCHITECTURE) |
| if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$") |
| set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}") |
| endif() |
| if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX |
| AND "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$") |
| set(__LAST_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}") |
| endif() |
| endif() |
| else() # not debian, rely on CMAKE_SIZEOF_VOID_P: |
| if(NOT DEFINED CMAKE_SIZEOF_VOID_P) |
| message(AUTHOR_WARNING |
| "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. " |
| "Please enable at least one language before including GNUInstallDirs.") |
| else() |
| if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8") |
| set(_LIBDIR_DEFAULT "lib64") |
| if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX) |
| set(__LAST_LIBDIR_DEFAULT "lib64") |
| endif() |
| endif() |
| endif() |
| endif() |
| endif() |
| if(NOT DEFINED CMAKE_INSTALL_LIBDIR) |
| set(CMAKE_INSTALL_LIBDIR "${_LIBDIR_DEFAULT}" CACHE PATH "object code libraries (${_LIBDIR_DEFAULT})") |
| elseif(DEFINED __LAST_LIBDIR_DEFAULT |
| AND "${__LAST_LIBDIR_DEFAULT}" STREQUAL "${CMAKE_INSTALL_LIBDIR}") |
| set_property(CACHE CMAKE_INSTALL_LIBDIR PROPERTY VALUE "${_LIBDIR_DEFAULT}") |
| endif() |
| endif() |
| # Save for next run |
| set(_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "CMAKE_INSTALL_PREFIX during last run") |
| unset(_libdir_set) |
| unset(__LAST_LIBDIR_DEFAULT) |
| |
| |
| if(NOT DEFINED CMAKE_INSTALL_INCLUDEDIR) |
| set(CMAKE_INSTALL_INCLUDEDIR "include" CACHE PATH "C header files (include)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_OLDINCLUDEDIR) |
| set(CMAKE_INSTALL_OLDINCLUDEDIR "/usr/include" CACHE PATH "C header files for non-gcc (/usr/include)") |
| endif() |
| |
| if(NOT DEFINED CMAKE_INSTALL_DATAROOTDIR) |
| set(CMAKE_INSTALL_DATAROOTDIR "share" CACHE PATH "read-only architecture-independent data root (share)") |
| endif() |
| |
| #----------------------------------------------------------------------------- |
| # Values whose defaults are relative to DATAROOTDIR. Store empty values in |
| # the cache and store the defaults in local variables if the cache values are |
| # not set explicitly. This auto-updates the defaults as DATAROOTDIR changes. |
| |
| if(NOT CMAKE_INSTALL_DATADIR) |
| set(CMAKE_INSTALL_DATADIR "" CACHE PATH "read-only architecture-independent data (DATAROOTDIR)") |
| set(CMAKE_INSTALL_DATADIR "${CMAKE_INSTALL_DATAROOTDIR}") |
| endif() |
| |
| if(CMAKE_SYSTEM_NAME STREQUAL "OpenBSD") |
| if(NOT CMAKE_INSTALL_INFODIR) |
| set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (info)") |
| set(CMAKE_INSTALL_INFODIR "info") |
| endif() |
| |
| if(NOT CMAKE_INSTALL_MANDIR) |
| set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (man)") |
| set(CMAKE_INSTALL_MANDIR "man") |
| endif() |
| else() |
| if(NOT CMAKE_INSTALL_INFODIR) |
| set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (DATAROOTDIR/info)") |
| set(CMAKE_INSTALL_INFODIR "${CMAKE_INSTALL_DATAROOTDIR}/info") |
| endif() |
| |
| if(NOT CMAKE_INSTALL_MANDIR) |
| set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (DATAROOTDIR/man)") |
| set(CMAKE_INSTALL_MANDIR "${CMAKE_INSTALL_DATAROOTDIR}/man") |
| endif() |
| endif() |
| |
| if(NOT CMAKE_INSTALL_LOCALEDIR) |
| set(CMAKE_INSTALL_LOCALEDIR "" CACHE PATH "locale-dependent data (DATAROOTDIR/locale)") |
| set(CMAKE_INSTALL_LOCALEDIR "${CMAKE_INSTALL_DATAROOTDIR}/locale") |
| endif() |
| |
| if(NOT CMAKE_INSTALL_DOCDIR) |
| set(CMAKE_INSTALL_DOCDIR "" CACHE PATH "documentation root (DATAROOTDIR/doc/PROJECT_NAME)") |
| set(CMAKE_INSTALL_DOCDIR "${CMAKE_INSTALL_DATAROOTDIR}/doc/${PROJECT_NAME}") |
| endif() |
| |
| #----------------------------------------------------------------------------- |
| |
| mark_as_advanced( |
| CMAKE_INSTALL_BINDIR |
| CMAKE_INSTALL_SBINDIR |
| CMAKE_INSTALL_LIBEXECDIR |
| CMAKE_INSTALL_SYSCONFDIR |
| CMAKE_INSTALL_SHAREDSTATEDIR |
| CMAKE_INSTALL_LOCALSTATEDIR |
| CMAKE_INSTALL_LIBDIR |
| CMAKE_INSTALL_INCLUDEDIR |
| CMAKE_INSTALL_OLDINCLUDEDIR |
| CMAKE_INSTALL_DATAROOTDIR |
| CMAKE_INSTALL_DATADIR |
| CMAKE_INSTALL_INFODIR |
| CMAKE_INSTALL_LOCALEDIR |
| CMAKE_INSTALL_MANDIR |
| CMAKE_INSTALL_DOCDIR |
| ) |
| |
| # Result directories |
| # |
| foreach(dir |
| BINDIR |
| SBINDIR |
| LIBEXECDIR |
| SYSCONFDIR |
| SHAREDSTATEDIR |
| LOCALSTATEDIR |
| LIBDIR |
| INCLUDEDIR |
| OLDINCLUDEDIR |
| DATAROOTDIR |
| DATADIR |
| INFODIR |
| LOCALEDIR |
| MANDIR |
| DOCDIR |
| ) |
| if(NOT IS_ABSOLUTE ${CMAKE_INSTALL_${dir}}) |
| set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}") |
| else() |
| set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_${dir}}") |
| endif() |
| endforeach() |