| # - Build binary and source package installers |
| # |
| # The CPackComponent module is the module which handles |
| # the component part of CPack. See CPack module for |
| # general information about CPack. |
| # |
| # For certain kinds of binary installers (including the graphical |
| # installers on Mac OS X and Windows), CPack generates installers that |
| # allow users to select individual application components to |
| # install. The contents of each of the components are identified by |
| # the COMPONENT argument of CMake's INSTALL command. These components |
| # can be annotated with user-friendly names and descriptions, |
| # inter-component dependencies, etc., and grouped in various ways to |
| # customize the resulting installer. See the cpack_add_* commands, |
| # described below, for more information about component-specific |
| # installations. |
| # |
| # Component-specific installation allows users to select specific sets |
| # of components to install during the install process. Installation |
| # components are identified by the COMPONENT argument of CMake's |
| # INSTALL commands, and should be further described by the following |
| # CPack commands: |
| # |
| # cpack_add_component - Describes a CPack installation component |
| # named by the COMPONENT argument to a CMake INSTALL command. |
| # |
| # cpack_add_component(compname |
| # [DISPLAY_NAME name] |
| # [DESCRIPTION description] |
| # [HIDDEN | REQUIRED | DISABLED ] |
| # [GROUP group] |
| # [DEPENDS comp1 comp2 ... ] |
| # [INSTALL_TYPES type1 type2 ... ] |
| # [DOWNLOADED] |
| # [ARCHIVE_FILE filename]) |
| # |
| # The cmake_add_component command describes an installation |
| # component, which the user can opt to install or remove as part of |
| # the graphical installation process. compname is the name of the |
| # component, as provided to the COMPONENT argument of one or more |
| # CMake INSTALL commands. |
| # |
| # DISPLAY_NAME is the displayed name of the component, used in |
| # graphical installers to display the component name. This value can |
| # be any string. |
| # |
| # DESCRIPTION is an extended description of the component, used in |
| # graphical installers to give the user additional information about |
| # the component. Descriptions can span multiple lines using "\n" as |
| # the line separator. Typically, these descriptions should be no |
| # more than a few lines long. |
| # |
| # HIDDEN indicates that this component will be hidden in the |
| # graphical installer, so that the user cannot directly change |
| # whether it is installed or not. |
| # |
| # REQUIRED indicates that this component is required, and therefore |
| # will always be installed. It will be visible in the graphical |
| # installer, but it cannot be unselected. (Typically, required |
| # components are shown greyed out). |
| # |
| # DISABLED indicates that this component should be disabled |
| # (unselected) by default. The user is free to select this component |
| # for installation, unless it is also HIDDEN. |
| # |
| # DEPENDS lists the components on which this component depends. If |
| # this component is selected, then each of the components listed |
| # must also be selected. The dependency information is encoded |
| # within the installer itself, so that users cannot install |
| # inconsitent sets of components. |
| # |
| # GROUP names the component group of which this component is a |
| # part. If not provided, the component will be a standalone |
| # component, not part of any component group. Component groups are |
| # described with the cpack_add_component_group command, detailed |
| # below. |
| # |
| # INSTALL_TYPES lists the installation types of which this component |
| # is a part. When one of these installations types is selected, this |
| # component will automatically be selected. Installation types are |
| # described with the cpack_add_install_type command, detailed below. |
| # |
| # DOWNLOADED indicates that this component should be downloaded |
| # on-the-fly by the installer, rather than packaged in with the |
| # installer itself. For more information, see the cpack_configure_downloads |
| # command. |
| # |
| # ARCHIVE_FILE provides a name for the archive file created by CPack |
| # to be used for downloaded components. If not supplied, CPack will |
| # create a file with some name based on CPACK_PACKAGE_FILE_NAME and |
| # the name of the component. See cpack_configure_downloads for more |
| # information. |
| # |
| # cpack_add_component_group - Describes a group of related CPack |
| # installation components. |
| # |
| # cpack_add_component_group(groupname |
| # [DISPLAY_NAME name] |
| # [DESCRIPTION description] |
| # [PARENT_GROUP parent] |
| # [EXPANDED] |
| # [BOLD_TITLE]) |
| # |
| # The cpack_add_component_group describes a group of installation |
| # components, which will be placed together within the listing of |
| # options. Typically, component groups allow the user to |
| # select/deselect all of the components within a single group via a |
| # single group-level option. Use component groups to reduce the |
| # complexity of installers with many options. groupname is an |
| # arbitrary name used to identify the group in the GROUP argument of |
| # the cpack_add_component command, which is used to place a |
| # component in a group. The name of the group must not conflict with |
| # the name of any component. |
| # |
| # DISPLAY_NAME is the displayed name of the component group, used in |
| # graphical installers to display the component group name. This |
| # value can be any string. |
| # |
| # DESCRIPTION is an extended description of the component group, |
| # used in graphical installers to give the user additional |
| # information about the components within that group. Descriptions |
| # can span multiple lines using "\n" as the line |
| # separator. Typically, these descriptions should be no more than a |
| # few lines long. |
| # |
| # PARENT_GROUP, if supplied, names the parent group of this group. |
| # Parent groups are used to establish a hierarchy of groups, |
| # providing an arbitrary hierarchy of groups. |
| # |
| # EXPANDED indicates that, by default, the group should show up as |
| # "expanded", so that the user immediately sees all of the |
| # components within the group. Otherwise, the group will initially |
| # show up as a single entry. |
| # |
| # BOLD_TITLE indicates that the group title should appear in bold, |
| # to call the user's attention to the group. |
| # |
| # cpack_add_install_type - Add a new installation type containing a |
| # set of predefined component selections to the graphical installer. |
| # |
| # cpack_add_install_type(typename |
| # [DISPLAY_NAME name]) |
| # |
| # The cpack_add_install_type command identifies a set of preselected |
| # components that represents a common use case for an |
| # application. For example, a "Developer" install type might include |
| # an application along with its header and library files, while an |
| # "End user" install type might just include the application's |
| # executable. Each component identifies itself with one or more |
| # install types via the INSTALL_TYPES argument to |
| # cpack_add_component. |
| # |
| # DISPLAY_NAME is the displayed name of the install type, which will |
| # typically show up in a drop-down box within a graphical |
| # installer. This value can be any string. |
| # |
| # cpack_configure_downloads - Configure CPack to download selected |
| # components on-the-fly as part of the installation process. |
| # |
| # cpack_configure_downloads(site |
| # [UPLOAD_DIRECTORY dirname] |
| # [ALL] |
| # [ADD_REMOVE|NO_ADD_REMOVE]) |
| # |
| # The cpack_configure_downloads command configures installation-time |
| # downloads of selected components. For each downloadable component, |
| # CPack will create an archive containing the contents of that |
| # component, which should be uploaded to the given site. When the |
| # user selects that component for installation, the installer will |
| # download and extract the component in place. This feature is |
| # useful for creating small installers that only download the |
| # requested components, saving bandwidth. Additionally, the |
| # installers are small enough that they will be installed as part of |
| # the normal installation process, and the "Change" button in |
| # Windows Add/Remove Programs control panel will allow one to add or |
| # remove parts of the application after the original |
| # installation. On Windows, the downloaded-components functionality |
| # requires the ZipDLL plug-in for NSIS, available at: |
| # |
| # http://nsis.sourceforge.net/ZipDLL_plug-in |
| # |
| # On Mac OS X, installers that download components on-the-fly can |
| # only be built and installed on system using Mac OS X 10.5 or |
| # later. |
| # |
| # The site argument is a URL where the archives for downloadable |
| # components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/ |
| # All of the archives produced by CPack should be uploaded to that location. |
| # |
| # UPLOAD_DIRECTORY is the local directory where CPack will create the |
| # various archives for each of the components. The contents of this |
| # directory should be uploaded to a location accessible by the URL given |
| # in the site argument. If omitted, CPack will use the directory |
| # CPackUploads inside the CMake binary directory to store the generated |
| # archives. |
| # |
| # The ALL flag indicates that all components be downloaded. Otherwise, only |
| # those components explicitly marked as DOWNLOADED or that have a specified |
| # ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies |
| # ADD_REMOVE (unless NO_ADD_REMOVE is specified). |
| # |
| # ADD_REMOVE indicates that CPack should install a copy of the installer |
| # that can be called from Windows' Add/Remove Programs dialog (via the |
| # "Modify" button) to change the set of installed components. NO_ADD_REMOVE |
| # turns off this behavior. This option is ignored on Mac OS X. |
| |
| #============================================================================= |
| # Copyright 2006-2009 Kitware, Inc. |
| # |
| # Distributed under the OSI-approved BSD License (the "License"); |
| # see accompanying file Copyright.txt for details. |
| # |
| # This software is distributed WITHOUT ANY WARRANTY; without even the |
| # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| # See the License for more information. |
| #============================================================================= |
| # (To distribute this file outside of CMake, substitute the full |
| # License text for the above reference.) |
| |
| # Define var in order to avoid multiple inclusion |
| IF(NOT CPackComponent_CMake_INCLUDED) |
| SET(CPackComponent_CMake_INCLUDED 1) |
| |
| # Argument-parsing macro from http://www.cmake.org/Wiki/CMakeMacroParseArguments |
| MACRO(cpack_parse_arguments prefix arg_names option_names) |
| SET(${prefix}_DEFAULT_ARGS) |
| FOREACH(arg_name ${arg_names}) |
| SET(${prefix}_${arg_name}) |
| ENDFOREACH(arg_name) |
| FOREACH(option ${option_names}) |
| SET(${prefix}_${option} FALSE) |
| ENDFOREACH(option) |
| |
| SET(current_arg_name DEFAULT_ARGS) |
| SET(current_arg_list) |
| FOREACH(arg ${ARGN}) |
| SET(larg_names ${arg_names}) |
| LIST(FIND larg_names "${arg}" is_arg_name) |
| IF (is_arg_name GREATER -1) |
| SET(${prefix}_${current_arg_name} ${current_arg_list}) |
| SET(current_arg_name ${arg}) |
| SET(current_arg_list) |
| ELSE (is_arg_name GREATER -1) |
| SET(loption_names ${option_names}) |
| LIST(FIND loption_names "${arg}" is_option) |
| IF (is_option GREATER -1) |
| SET(${prefix}_${arg} TRUE) |
| ELSE (is_option GREATER -1) |
| SET(current_arg_list ${current_arg_list} ${arg}) |
| ENDIF (is_option GREATER -1) |
| ENDIF (is_arg_name GREATER -1) |
| ENDFOREACH(arg) |
| SET(${prefix}_${current_arg_name} ${current_arg_list}) |
| ENDMACRO(cpack_parse_arguments) |
| |
| # Macro that appends a SET command for the given variable name (var) |
| # to the macro named strvar, but only if the variable named "var" |
| # has been defined. The string will eventually be appended to a CPack |
| # configuration file. |
| MACRO(cpack_append_variable_set_command var strvar) |
| IF (DEFINED ${var}) |
| SET(${strvar} "${${strvar}}SET(${var}") |
| FOREACH(APPENDVAL ${${var}}) |
| SET(${strvar} "${${strvar}} ${APPENDVAL}") |
| ENDFOREACH(APPENDVAL) |
| SET(${strvar} "${${strvar}})\n") |
| ENDIF (DEFINED ${var}) |
| ENDMACRO(cpack_append_variable_set_command) |
| |
| # Macro that appends a SET command for the given variable name (var) |
| # to the macro named strvar, but only if the variable named "var" |
| # has been defined and is a string. The string will eventually be |
| # appended to a CPack configuration file. |
| MACRO(cpack_append_string_variable_set_command var strvar) |
| IF (DEFINED ${var}) |
| LIST(LENGTH ${var} CPACK_APP_VALUE_LEN) |
| IF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| SET(${strvar} "${${strvar}}SET(${var} \"${${var}}\")\n") |
| ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| ENDIF (DEFINED ${var}) |
| ENDMACRO(cpack_append_string_variable_set_command) |
| |
| # Macro that appends a SET command for the given variable name (var) |
| # to the macro named strvar, but only if the variable named "var" |
| # has been set to true. The string will eventually be |
| # appended to a CPack configuration file. |
| MACRO(cpack_append_option_set_command var strvar) |
| IF (${var}) |
| LIST(LENGTH ${var} CPACK_APP_VALUE_LEN) |
| IF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| SET(${strvar} "${${strvar}}SET(${var} TRUE)\n") |
| ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| ENDIF (${var}) |
| ENDMACRO(cpack_append_option_set_command) |
| |
| # Macro that adds a component to the CPack installer |
| MACRO(cpack_add_component compname) |
| STRING(TOUPPER ${compname} CPACK_ADDCOMP_UNAME) |
| cpack_parse_arguments(CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME} |
| "DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE" |
| "HIDDEN;REQUIRED;DISABLED;DOWNLOADED" |
| ${ARGN} |
| ) |
| |
| if (CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED) |
| SET(CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n") |
| else () |
| SET(CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n") |
| endif () |
| |
| IF(NOT CPACK_MONOLITHIC_INSTALL) |
| # If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the |
| # value of CPACK_COMPONENTS_ALL in the configuration file. This will |
| # take care of any components that have been added after the CPack |
| # moduled was included. |
| IF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER) |
| GET_CMAKE_PROPERTY(CPACK_ADDCOMP_COMPONENTS COMPONENTS) |
| SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL") |
| FOREACH(COMP ${CPACK_ADDCOMP_COMPONENTS}) |
| SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR} ${COMP}") |
| ENDFOREACH(COMP) |
| SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR})\n") |
| ENDIF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER) |
| ENDIF(NOT CPACK_MONOLITHIC_INSTALL) |
| |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISPLAY_NAME |
| CPACK_ADDCOMP_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DESCRIPTION |
| CPACK_ADDCOMP_STR) |
| cpack_append_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_GROUP |
| CPACK_ADDCOMP_STR) |
| cpack_append_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DEPENDS |
| CPACK_ADDCOMP_STR) |
| cpack_append_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_INSTALL_TYPES |
| CPACK_ADDCOMP_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_HIDDEN |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_REQUIRED |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISABLED |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED |
| CPACK_ADDCOMP_STR) |
| # Backward compatibility issue. |
| # Write to config iff the macros is used after CPack.cmake has been |
| # included, other it's not necessary because the variables |
| # will be encoded by cpack_encode_variables. |
| IF(CPack_CMake_INCLUDED) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDCOMP_STR}") |
| ENDIF(CPack_CMake_INCLUDED) |
| ENDMACRO(cpack_add_component) |
| |
| # Macro that adds a component group to the CPack installer |
| MACRO(cpack_add_component_group grpname) |
| STRING(TOUPPER ${grpname} CPACK_ADDGRP_UNAME) |
| cpack_parse_arguments(CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME} |
| "DISPLAY_NAME;DESCRIPTION" |
| "EXPANDED;BOLD_TITLE" |
| ${ARGN} |
| ) |
| |
| SET(CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n") |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DISPLAY_NAME |
| CPACK_ADDGRP_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DESCRIPTION |
| CPACK_ADDGRP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_EXPANDED |
| CPACK_ADDGRP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_BOLD_TITLE |
| CPACK_ADDGRP_STR) |
| # Backward compatibility issue. |
| # Write to config iff the macros is used after CPack.cmake has been |
| # included, other it's not necessary because the variables |
| # will be encoded by cpack_encode_variables. |
| IF(CPack_CMake_INCLUDED) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDGRP_STR}") |
| ENDIF(CPack_CMake_INCLUDED) |
| ENDMACRO(cpack_add_component_group) |
| |
| # Macro that adds an installation type to the CPack installer |
| MACRO(cpack_add_install_type insttype) |
| STRING(TOUPPER ${insttype} CPACK_INSTTYPE_UNAME) |
| cpack_parse_arguments(CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME} |
| "DISPLAY_NAME" |
| "" |
| ${ARGN} |
| ) |
| |
| SET(CPACK_INSTTYPE_STR |
| "\n# Configuration for installation type \"${insttype}\"\n") |
| SET(CPACK_INSTTYPE_STR |
| "${CPACK_INSTTYPE_STR}LIST(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n") |
| cpack_append_string_variable_set_command( |
| CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}_DISPLAY_NAME |
| CPACK_INSTTYPE_STR) |
| # Backward compatibility issue. |
| # Write to config iff the macros is used after CPack.cmake has been |
| # included, other it's not necessary because the variables |
| # will be encoded by cpack_encode_variables. |
| IF(CPack_CMake_INCLUDED) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_INSTTYPE_STR}") |
| ENDIF(CPack_CMake_INCLUDED) |
| ENDMACRO(cpack_add_install_type) |
| |
| MACRO(cpack_configure_downloads site) |
| cpack_parse_arguments(CPACK_DOWNLOAD |
| "UPLOAD_DIRECTORY" |
| "ALL;ADD_REMOVE;NO_ADD_REMOVE" |
| ${ARGN} |
| ) |
| |
| SET(CPACK_CONFIG_DL_STR |
| "\n# Downloaded components configuration\n") |
| SET(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY}) |
| SET(CPACK_DOWNLOAD_SITE ${site}) |
| cpack_append_string_variable_set_command( |
| CPACK_DOWNLOAD_SITE |
| CPACK_CONFIG_DL_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_UPLOAD_DIRECTORY |
| CPACK_CONFIG_DL_STR) |
| cpack_append_option_set_command( |
| CPACK_DOWNLOAD_ALL |
| CPACK_CONFIG_DL_STR) |
| IF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE}) |
| SET(CPACK_DOWNLOAD_ADD_REMOVE ON) |
| ENDIF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE}) |
| SET(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE}) |
| cpack_append_option_set_command( |
| CPACK_ADD_REMOVE |
| CPACK_CONFIG_DL_STR) |
| # Backward compatibility issue. |
| # Write to config iff the macros is used after CPack.cmake has been |
| # included, other it's not necessary because the variables |
| # will be encoded by cpack_encode_variables. |
| IF(CPack_CMake_INCLUDED) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}") |
| ENDIF(CPack_CMake_INCLUDED) |
| ENDMACRO(cpack_configure_downloads) |
| ENDIF(NOT CPackComponent_CMake_INCLUDED) |