| # - Build binary and source package installers |
| # |
| # The CPack module generates binary and source installers in a variety |
| # of formats using the cpack program. Inclusion of the CPack module |
| # adds two new targets to the resulting makefiles, package and |
| # package_source, which build the binary and source installers, |
| # respectively. The generated binary installers contain everything |
| # installed via CMake's INSTALL command (and the deprecated |
| # INSTALL_FILES, INSTALL_PROGRAMS, and INSTALL_TARGETS commands). |
| # |
| # For certain kinds of binary installers (including the graphical |
| # installers on Mac OS X and Windows), CPack generates installers that |
| # allow users to select individual application components to |
| # install. The contents of each of the components are identified by |
| # the COMPONENT argument of CMake's INSTALL command. These components |
| # can be annotated with user-friendly names and descriptions, |
| # inter-component dependencies, etc., and grouped in various ways to |
| # customize the resulting installer. See the cpack_add_* commands, |
| # described below, for more information about component-specific |
| # installations. |
| # |
| # Before including the CPack module, there are a variety of variables |
| # that can be set to customize the resulting installers. The most |
| # commonly-used variables are: |
| # |
| # CPACK_PACKAGE_NAME - The name of the package (or application). If |
| # not specified, defaults to the project name. |
| # |
| # CPACK_PACKAGE_VENDOR - The name of the package vendor (e.g., |
| # "Kitware"). |
| # |
| # CPACK_PACKAGE_VERSION_MAJOR - Package major Version |
| # |
| # CPACK_PACKAGE_VERSION_MINOR - Package minor Version |
| # |
| # CPACK_PACKAGE_VERSION_PATCH - Package patch Version |
| # |
| # CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the |
| # project. Used, for example, the introduction screen of a |
| # CPack-generated Windows installer to describe the project. |
| # |
| # CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the |
| # project (only a few words). |
| # |
| # CPACK_PACKAGE_FILE_NAME - The name of the package file to generate, |
| # not including the extension. For example, cmake-2.6.1-Linux-i686. |
| # |
| # CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the |
| # target system, e.g., "CMake 2.5". |
| # |
| # CPACK_RESOURCE_FILE_LICENSE - License file for the project, which |
| # will typically be displayed to the user (often with an explicit |
| # "Accept" button, for graphical installers) prior to installation. |
| # |
| # CPACK_RESOURCE_FILE_README - ReadMe file for the project, which |
| # typically describes in some detail |
| # |
| # CPACK_RESOURCE_FILE_WELCOME - Welcome file for the project, which |
| # welcomes users to this installer. Typically used in the graphical |
| # installers on Windows and Mac OS X. |
| # |
| # CPACK_MONOLITHIC_INSTALL - Disables the component-based |
| # installation mechanism, so that all components are always installed. |
| # |
| # CPACK_GENERATOR - List of CPack generators to use. If not |
| # specified, CPack will create a set of options (e.g., |
| # CPACK_BINARY_NSIS) allowing the user to enable/disable individual |
| # generators. |
| # |
| # CPACK_OUTPUT_CONFIG_FILE - The name of the CPack configuration file |
| # for binary installers that will be generated by the CPack |
| # module. Defaults to CPackConfig.cmake. |
| # |
| # CPACK_PACKAGE_EXECUTABLES - Lists each of the executables along |
| # with a text label, to be used to create Start Menu shortcuts on |
| # Windows. For example, setting this to the list ccmake;CMake will |
| # create a shortcut named "CMake" that will execute the installed |
| # executable ccmake. |
| # |
| # CPACK_STRIP_FILES - List of files to be stripped. Starting with |
| # CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which |
| # enables stripping of all files (a list of files evaluates to TRUE |
| # in CMake, so this change is compatible). |
| # |
| # The following CPack variables are specific to source packages, and |
| # will not affect binary packages: |
| # |
| # CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package, |
| # e.g., cmake-2.6.1 |
| # |
| # CPACK_SOURCE_STRIP_FILES - List of files in the source tree that |
| # will be stripped. Starting with CMake 2.6.0 |
| # CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables |
| # stripping of all files (a list of files evaluates to TRUE in CMake, |
| # so this change is compatible). |
| # |
| # CPACK_SOURCE_GENERATOR - List of generators used for the source |
| # packages. As with CPACK_GENERATOR, if this is not specified then |
| # CPack will create a set of options (e.g., CPACK_SOURCE_ZIP) |
| # allowing users to select which packages will be generated. |
| # |
| # CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack |
| # configuration file for source installers that will be generated by |
| # the CPack module. Defaults to CPackSourceConfig.cmake. |
| # |
| # CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree |
| # that won't be packaged when building a source package. This is a |
| # list of patterns, e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.* |
| # |
| # The following variables are specific to the DragNDrop installers |
| # built on Mac OS X: |
| # |
| # CPACK_DMG_VOLUME_NAME - The volume name of the generated disk |
| # image. Defaults to CPACK_PACKAGE_FILE_NAME. |
| # |
| # CPACK_DMG_FORMAT - The disk image format. Common values are UDRO |
| # (UDIF read-only), UDZO (UDIF zlib-compressed) or UDBZ (UDIF |
| # bzip2-compressed). Refer to hdiutil(1) for more information on |
| # other available formats. |
| # |
| # CPACK_DMG_DS_STORE - Path to a custom .DS_Store file which e.g. |
| # can be used to specify the Finder window position/geometry and |
| # layout (such as hidden toolbars, placement of the icons etc.). |
| # This file has to be generated by the Finder (either manually or |
| # through OSA-script) using a normal folder from which the .DS_Store |
| # file can then be extracted. |
| # |
| # CPACK_DMG_BACKGROUND_IMAGE - Path to an image file which is to be |
| # used as the background for the Finder Window when the disk image |
| # is opened. By default no background image is set. The background |
| # image is applied after applying the custom .DS_Store file. |
| # |
| # CPACK_COMMAND_HDIUTIL - Path to the hdiutil(1) command used to |
| # operate on disk image files on Mac OS X. This variable can be used |
| # to override the automatically detected command (or specify its |
| # location if the auto-detection fails to find it.) |
| # |
| # CPACK_COMMAND_SETFILE - Path to the SetFile(1) command used to set |
| # extended attributes on files and directories on Mac OS X. This |
| # variable can be used to override the automatically detected |
| # command (or specify its location if the auto-detection fails to |
| # find it.) |
| # |
| # CPACK_COMMAND_REZ - Path to the Rez(1) command used to compile |
| # resources on Mac OS X. This variable can be used to override the |
| # automatically detected command (or specify its location if the |
| # auto-detection fails to find it.) |
| # |
| # Installers built on Mac OS X using the Bundle generator use the |
| # aforementioned DragNDrop variables, plus the following Bundle-specific |
| # parameters: |
| # |
| # CPACK_BUNDLE_NAME - The name of the generated bundle. This |
| # appears in the OSX finder as the bundle name. Required. |
| # |
| # CPACK_BUNDLE_PLIST - Path to an OSX plist file that will be used |
| # as the Info.plist for the generated bundle. This assumes that |
| # the caller has generated or specified their own Info.plist file. |
| # Required. |
| # |
| # CPACK_BUNDLE_ICON - Path to an OSX icns file that will be used as |
| # the icon for the generated bundle. This is the icon that appears |
| # in the OSX finder for the bundle, and in the OSX dock when the |
| # bundle is opened. Required. |
| # |
| # CPACK_BUNDLE_STARTUP_SCRIPT - Path to an executable or script that |
| # will be run whenever an end-user double-clicks the generated bundle |
| # in the OSX Finder. Optional. |
| # |
| # The following variables are specific to the graphical installers built |
| # on Windows using the Nullsoft Installation System. |
| # |
| # CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when |
| # installing this project. |
| # |
| # CPACK_NSIS_MUI_ICON - The icon file (.ico) for the generated |
| # install program. |
| # |
| # CPACK_NSIS_MUI_UNIICON - The icon file (.ico) for the generated |
| # uninstall program. |
| # |
| # CPACK_PACKAGE_ICON - A branding image that will be displayed inside |
| # the installer. |
| # |
| # CPACK_NSIS_EXTRA_INSTALL_COMMANDS - Extra NSIS commands that will |
| # be added to the install Section. |
| # |
| # CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS - Extra NSIS commands that will |
| # be added to the uninstall Section. |
| # |
| # CPACK_NSIS_COMPRESSOR - The arguments that will be passed to the |
| # NSIS SetCompressor command. |
| # |
| # CPACK_NSIS_MODIFY_PATH - If this is set to "ON", then an extra page |
| # will appear in the installer that will allow the user to choose |
| # whether the program directory should be added to the system PATH |
| # variable. |
| # |
| # CPACK_NSIS_DISPLAY_NAME - The display name string that appears in |
| # the Windows Add/Remove Program control panel |
| # |
| # CPACK_NSIS_PACKAGE_NAME - The title displayed at the top of the |
| # installer. |
| # |
| # CPACK_NSIS_INSTALLED_ICON_NAME - A path to the executable that |
| # contains the installer icon. |
| # |
| # CPACK_NSIS_HELP_LINK - URL to a web site providing assistance in |
| # installing your application. |
| # |
| # CPACK_NSIS_URL_INFO_ABOUT - URL to a web site providing more |
| # information about your application. |
| # |
| # CPACK_NSIS_CONTACT - Contact information for questions and comments |
| # about the installation process. |
| # |
| # CPACK_NSIS_CREATE_ICONS_EXTRA - Additional NSIS commands for |
| # creating start menu shortcuts. |
| # |
| # CPACK_NSIS_DELETE_ICONS_EXTRA -Additional NSIS commands to |
| # uninstall start menu shortcuts. |
| # |
| # The following variable is specific to installers build on Mac OS X |
| # using PackageMaker: |
| # |
| # CPACK_OSX_PACKAGE_VERSION - The version of Mac OS X that the |
| # resulting PackageMaker archive should be compatible |
| # with. Different versions of Mac OS X support different |
| # features. For example, CPack can only build component-based |
| # installers for Mac OS X 10.4 or newer, and can only build |
| # installers that download component son-the-fly for Mac OS X 10.5 |
| # or newer. If left blank, this value will be set to the minimum |
| # version of Mac OS X that supports the requested features. Set this |
| # variable to some value (e.g., 10.4) only if you want to guarantee |
| # that your installer will work on that version of Mac OS X, and |
| # don't mind missing extra features available in the installer |
| # shipping with later versions of Mac OS X. |
| # |
| # The following variables are for advanced uses of CPack: |
| # |
| # CPACK_CMAKE_GENERATOR - What CMake generator should be used if the |
| # project is CMake project. Defaults to the value of CMAKE_GENERATOR; |
| # few users will want to change this setting. |
| # |
| # CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify |
| # what project to install. The four values are: Build directory, |
| # Project Name, Project Component, Directory. If omitted, CPack will |
| # build an installer that installers everything. |
| # |
| # CPACK_SYSTEM_NAME - System name, defaults to the value of |
| # ${CMAKE_SYSTEM_NAME}. |
| # |
| # CPACK_PACKAGE_VERSION - Package full version, used internally. By |
| # default, this is built from CPACK_PACKAGE_VERSION_MAJOR, |
| # CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH. |
| # |
| # CPACK_TOPLEVEL_TAG - Directory for the installed files. |
| # |
| # CPACK_INSTALL_COMMANDS - Extra commands to install components. |
| # |
| # CPACK_INSTALL_DIRECTORIES - Extra directories to install. |
| # |
| # Component-specific installation allows users to select specific sets |
| # of components to install during the install process. Installation |
| # components are identified by the COMPONENT argument of CMake's |
| # INSTALL commands, and should be further described by the following |
| # CPack commands: |
| # |
| # cpack_add_component - Describes a CPack installation component |
| # named by the COMPONENT argument to a CMake INSTALL command. |
| # |
| # cpack_add_component(compname |
| # [DISPLAY_NAME name] |
| # [DESCRIPTION description] |
| # [HIDDEN | REQUIRED | DISABLED ] |
| # [GROUP group] |
| # [DEPENDS comp1 comp2 ... ] |
| # [INSTALL_TYPES type1 type2 ... ] |
| # [DOWNLOADED] |
| # [ARCHIVE_FILE filename]) |
| # |
| # The cmake_add_component command describes an installation |
| # component, which the user can opt to install or remove as part of |
| # the graphical installation process. compname is the name of the |
| # component, as provided to the COMPONENT argument of one or more |
| # CMake INSTALL commands. |
| # |
| # DISPLAY_NAME is the displayed name of the component, used in |
| # graphical installers to display the component name. This value can |
| # be any string. |
| # |
| # DESCRIPTION is an extended description of the component, used in |
| # graphical installers to give the user additional information about |
| # the component. Descriptions can span multiple lines using "\n" as |
| # the line separator. Typically, these descriptions should be no |
| # more than a few lines long. |
| # |
| # HIDDEN indicates that this component will be hidden in the |
| # graphical installer, so that the user cannot directly change |
| # whether it is installed or not. |
| # |
| # REQUIRED indicates that this component is required, and therefore |
| # will always be installed. It will be visible in the graphical |
| # installer, but it cannot be unselected. (Typically, required |
| # components are shown greyed out). |
| # |
| # DISABLED indicates that this component should be disabled |
| # (unselected) by default. The user is free to select this component |
| # for installation, unless it is also HIDDEN. |
| # |
| # DEPENDS lists the components on which this component depends. If |
| # this component is selected, then each of the components listed |
| # must also be selected. The dependency information is encoded |
| # within the installer itself, so that users cannot install |
| # inconsitent sets of components. |
| # |
| # GROUP names the component group of which this component is a |
| # part. If not provided, the component will be a standalone |
| # component, not part of any component group. Component groups are |
| # described with the cpack_add_component_group command, detailed |
| # below. |
| # |
| # INSTALL_TYPES lists the installation types of which this component |
| # is a part. When one of these installations types is selected, this |
| # component will automatically be selected. Installation types are |
| # described with the cpack_add_install_type command, detailed below. |
| # |
| # DOWNLOADED indicates that this component should be downloaded |
| # on-the-fly by the installer, rather than packaged in with the |
| # installer itself. For more information, see the cpack_configure_downloads |
| # command. |
| # |
| # ARCHIVE_FILE provides a name for the archive file created by CPack |
| # to be used for downloaded components. If not supplied, CPack will |
| # create a file with some name based on CPACK_PACKAGE_FILE_NAME and |
| # the name of the component. See cpack_configure_downloads for more |
| # information. |
| # |
| # cpack_add_component_group - Describes a group of related CPack |
| # installation components. |
| # |
| # cpack_add_component_group(groupname |
| # [DISPLAY_NAME name] |
| # [DESCRIPTION description] |
| # [PARENT_GROUP parent] |
| # [EXPANDED] |
| # [BOLD_TITLE]) |
| # |
| # The cpack_add_component_group describes a group of installation |
| # components, which will be placed together within the listing of |
| # options. Typically, component groups allow the user to |
| # select/deselect all of the components within a single group via a |
| # single group-level option. Use component groups to reduce the |
| # complexity of installers with many options. groupname is an |
| # arbitrary name used to identify the group in the GROUP argument of |
| # the cpack_add_component command, which is used to place a |
| # component in a group. The name of the group must not conflict with |
| # the name of any component. |
| # |
| # DISPLAY_NAME is the displayed name of the component group, used in |
| # graphical installers to display the component group name. This |
| # value can be any string. |
| # |
| # DESCRIPTION is an extended description of the component group, |
| # used in graphical installers to give the user additional |
| # information about the components within that group. Descriptions |
| # can span multiple lines using "\n" as the line |
| # separator. Typically, these descriptions should be no more than a |
| # few lines long. |
| # |
| # PARENT_GROUP, if supplied, names the parent group of this group. |
| # Parent groups are used to establish a hierarchy of groups, |
| # providing an arbitrary hierarchy of groups. |
| # |
| # EXPANDED indicates that, by default, the group should show up as |
| # "expanded", so that the user immediately sees all of the |
| # components within the group. Otherwise, the group will initially |
| # show up as a single entry. |
| # |
| # BOLD_TITLE indicates that the group title should appear in bold, |
| # to call the user's attention to the group. |
| # |
| # cpack_add_install_type - Add a new installation type containing a |
| # set of predefined component selections to the graphical installer. |
| # |
| # cpack_add_install_type(typename |
| # [DISPLAY_NAME name]) |
| # |
| # The cpack_add_install_type command identifies a set of preselected |
| # components that represents a common use case for an |
| # application. For example, a "Developer" install type might include |
| # an application along with its header and library files, while an |
| # "End user" install type might just include the application's |
| # executable. Each component identifies itself with one or more |
| # install types via the INSTALL_TYPES argument to |
| # cpack_add_component. |
| # |
| # DISPLAY_NAME is the displayed name of the install type, which will |
| # typically show up in a drop-down box within a graphical |
| # installer. This value can be any string. |
| # |
| # cpack_configure_downloads - Configure CPack to download selected |
| # components on-the-fly as part of the installation process. |
| # |
| # cpack_configure_downloads(site |
| # [UPLOAD_DIRECTORY dirname] |
| # [ALL] |
| # [ADD_REMOVE|NO_ADD_REMOVE]) |
| # |
| # The cpack_configure_downloads command configures installation-time |
| # downloads of selected components. For each downloadable component, |
| # CPack will create an archive containing the contents of that |
| # component, which should be uploaded to the given site. When the |
| # user selects that component for installation, the installer will |
| # download and extract the component in place. This feature is |
| # useful for creating small installers that only download the |
| # requested components, saving bandwidth. Additionally, the |
| # installers are small enough that they will be installed as part of |
| # the normal installation process, and the "Change" button in |
| # Windows Add/Remove Programs control panel will allow one to add or |
| # remove parts of the application after the original |
| # installation. On Windows, the downloaded-components functionality |
| # requires the ZipDLL plug-in for NSIS, available at: |
| # |
| # http://nsis.sourceforge.net/ZipDLL_plug-in |
| # |
| # On Mac OS X, installers that download components on-the-fly can |
| # only be built and installed on system using Mac OS X 10.5 or |
| # later. |
| # |
| # The site argument is a URL where the archives for downloadable |
| # components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/ |
| # All of the archives produced by CPack should be uploaded to that location. |
| # |
| # UPLOAD_DIRECTORY is the local directory where CPack will create the |
| # various archives for each of the components. The contents of this |
| # directory should be uploaded to a location accessible by the URL given |
| # in the site argument. If omitted, CPack will use the directory |
| # CPackUploads inside the CMake binary directory to store the generated |
| # archives. |
| # |
| # The ALL flag indicates that all components be downloaded. Otherwise, only |
| # those components explicitly marked as DOWNLOADED or that have a specified |
| # ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies |
| # ADD_REMOVE (unless NO_ADD_REMOVE is specified). |
| # |
| # ADD_REMOVE indicates that CPack should install a copy of the installer |
| # that can be called from Windows' Add/Remove Programs dialog (via the |
| # "Modify" button) to change the set of installed components. NO_ADD_REMOVE |
| # turns off this behavior. This option is ignored on Mac OS X. |
| |
| #============================================================================= |
| # Copyright 2006-2009 Kitware, Inc. |
| # |
| # Distributed under the OSI-approved BSD License (the "License"); |
| # see accompanying file Copyright.txt for details. |
| # |
| # This software is distributed WITHOUT ANY WARRANTY; without even the |
| # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| # See the License for more information. |
| #============================================================================= |
| # (To distributed this file outside of CMake, substitute the full |
| # License text for the above reference.) |
| |
| # Pick a configuration file |
| SET(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") |
| IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") |
| SET(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") |
| ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in") |
| SET(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in") |
| IF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") |
| SET(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") |
| ENDIF(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in") |
| |
| # Argument-parsing macro from http://www.cmake.org/Wiki/CMakeMacroParseArguments |
| MACRO(cpack_parse_arguments prefix arg_names option_names) |
| SET(${prefix}_DEFAULT_ARGS) |
| FOREACH(arg_name ${arg_names}) |
| SET(${prefix}_${arg_name}) |
| ENDFOREACH(arg_name) |
| FOREACH(option ${option_names}) |
| SET(${prefix}_${option} FALSE) |
| ENDFOREACH(option) |
| |
| SET(current_arg_name DEFAULT_ARGS) |
| SET(current_arg_list) |
| FOREACH(arg ${ARGN}) |
| SET(larg_names ${arg_names}) |
| LIST(FIND larg_names "${arg}" is_arg_name) |
| IF (is_arg_name GREATER -1) |
| SET(${prefix}_${current_arg_name} ${current_arg_list}) |
| SET(current_arg_name ${arg}) |
| SET(current_arg_list) |
| ELSE (is_arg_name GREATER -1) |
| SET(loption_names ${option_names}) |
| LIST(FIND loption_names "${arg}" is_option) |
| IF (is_option GREATER -1) |
| SET(${prefix}_${arg} TRUE) |
| ELSE (is_option GREATER -1) |
| SET(current_arg_list ${current_arg_list} ${arg}) |
| ENDIF (is_option GREATER -1) |
| ENDIF (is_arg_name GREATER -1) |
| ENDFOREACH(arg) |
| SET(${prefix}_${current_arg_name} ${current_arg_list}) |
| ENDMACRO(cpack_parse_arguments) |
| |
| # Macro that appends a SET command for the given variable name (var) |
| # to the macro named strvar, but only if the variable named "var" |
| # has been defined. The string will eventually be appended to a CPack |
| # configuration file. |
| MACRO(cpack_append_variable_set_command var strvar) |
| IF (DEFINED ${var}) |
| SET(${strvar} "${${strvar}}SET(${var}") |
| FOREACH(APPENDVAL ${${var}}) |
| SET(${strvar} "${${strvar}} ${APPENDVAL}") |
| ENDFOREACH(APPENDVAL) |
| SET(${strvar} "${${strvar}})\n") |
| ENDIF (DEFINED ${var}) |
| ENDMACRO(cpack_append_variable_set_command) |
| |
| # Macro that appends a SET command for the given variable name (var) |
| # to the macro named strvar, but only if the variable named "var" |
| # has been defined and is a string. The string will eventually be |
| # appended to a CPack configuration file. |
| MACRO(cpack_append_string_variable_set_command var strvar) |
| IF (DEFINED ${var}) |
| LIST(LENGTH ${var} CPACK_APP_VALUE_LEN) |
| IF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| SET(${strvar} "${${strvar}}SET(${var} \"${${var}}\")\n") |
| ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| ENDIF (DEFINED ${var}) |
| ENDMACRO(cpack_append_string_variable_set_command) |
| |
| # Macro that appends a SET command for the given variable name (var) |
| # to the macro named strvar, but only if the variable named "var" |
| # has been set to true. The string will eventually be |
| # appended to a CPack configuration file. |
| MACRO(cpack_append_option_set_command var strvar) |
| IF (${var}) |
| LIST(LENGTH ${var} CPACK_APP_VALUE_LEN) |
| IF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| SET(${strvar} "${${strvar}}SET(${var} TRUE)\n") |
| ENDIF(${CPACK_APP_VALUE_LEN} EQUAL 1) |
| ENDIF (${var}) |
| ENDMACRO(cpack_append_option_set_command) |
| |
| # Macro that adds a component to the CPack installer |
| MACRO(cpack_add_component compname) |
| STRING(TOUPPER ${compname} CPACK_ADDCOMP_UNAME) |
| cpack_parse_arguments(CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME} |
| "DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE" |
| "HIDDEN;REQUIRED;DISABLED;DOWNLOADED" |
| ${ARGN} |
| ) |
| |
| if (CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED) |
| SET(CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n") |
| else () |
| SET(CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n") |
| endif () |
| |
| IF(NOT CPACK_MONOLITHIC_INSTALL) |
| # If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the |
| # value of CPACK_COMPONENTS_ALL in the configuration file. This will |
| # take care of any components that have been added after the CPack |
| # moduled was included. |
| IF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER) |
| GET_CMAKE_PROPERTY(CPACK_ADDCOMP_COMPONENTS COMPONENTS) |
| SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL") |
| FOREACH(COMP ${CPACK_ADDCOMP_COMPONENTS}) |
| SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR} ${COMP}") |
| ENDFOREACH(COMP) |
| SET(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR})\n") |
| ENDIF(NOT CPACK_COMPONENTS_ALL_SET_BY_USER) |
| ENDIF(NOT CPACK_MONOLITHIC_INSTALL) |
| |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISPLAY_NAME |
| CPACK_ADDCOMP_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DESCRIPTION |
| CPACK_ADDCOMP_STR) |
| cpack_append_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_GROUP |
| CPACK_ADDCOMP_STR) |
| cpack_append_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DEPENDS |
| CPACK_ADDCOMP_STR) |
| cpack_append_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_INSTALL_TYPES |
| CPACK_ADDCOMP_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_HIDDEN |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_REQUIRED |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISABLED |
| CPACK_ADDCOMP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED |
| CPACK_ADDCOMP_STR) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDCOMP_STR}") |
| ENDMACRO(cpack_add_component) |
| |
| # Macro that adds a component group to the CPack installer |
| MACRO(cpack_add_component_group grpname) |
| STRING(TOUPPER ${grpname} CPACK_ADDGRP_UNAME) |
| cpack_parse_arguments(CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME} |
| "DISPLAY_NAME;DESCRIPTION" |
| "EXPANDED;BOLD_TITLE" |
| ${ARGN} |
| ) |
| |
| SET(CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n") |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DISPLAY_NAME |
| CPACK_ADDGRP_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DESCRIPTION |
| CPACK_ADDGRP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_EXPANDED |
| CPACK_ADDGRP_STR) |
| cpack_append_option_set_command( |
| CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_BOLD_TITLE |
| CPACK_ADDGRP_STR) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDGRP_STR}") |
| ENDMACRO(cpack_add_component_group) |
| |
| # Macro that adds an installation type to the CPack installer |
| MACRO(cpack_add_install_type insttype) |
| STRING(TOUPPER ${insttype} CPACK_INSTTYPE_UNAME) |
| cpack_parse_arguments(CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME} |
| "DISPLAY_NAME" |
| "" |
| ${ARGN} |
| ) |
| |
| SET(CPACK_INSTTYPE_STR |
| "\n# Configuration for installation type \"${insttype}\"\n") |
| SET(CPACK_INSTTYPE_STR |
| "${CPACK_INSTTYPE_STR}LIST(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n") |
| cpack_append_string_variable_set_command( |
| CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}_DISPLAY_NAME |
| CPACK_INSTTYPE_STR) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_INSTTYPE_STR}") |
| ENDMACRO(cpack_add_install_type) |
| |
| MACRO(cpack_configure_downloads site) |
| cpack_parse_arguments(CPACK_DOWNLOAD |
| "UPLOAD_DIRECTORY" |
| "ALL;ADD_REMOVE;NO_ADD_REMOVE" |
| ${ARGN} |
| ) |
| |
| SET(CPACK_CONFIG_DL_STR |
| "\n# Downloaded components configuration\n") |
| SET(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY}) |
| SET(CPACK_DOWNLOAD_SITE ${site}) |
| cpack_append_string_variable_set_command( |
| CPACK_DOWNLOAD_SITE |
| CPACK_CONFIG_DL_STR) |
| cpack_append_string_variable_set_command( |
| CPACK_UPLOAD_DIRECTORY |
| CPACK_CONFIG_DL_STR) |
| cpack_append_option_set_command( |
| CPACK_DOWNLOAD_ALL |
| CPACK_CONFIG_DL_STR) |
| IF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE}) |
| SET(CPACK_DOWNLOAD_ADD_REMOVE ON) |
| ENDIF (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE}) |
| SET(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE}) |
| cpack_append_option_set_command( |
| CPACK_ADD_REMOVE |
| CPACK_CONFIG_DL_STR) |
| FILE(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}") |
| ENDMACRO(cpack_configure_downloads) |
| |
| # Macro for setting values if a user did not overwrite them |
| MACRO(cpack_set_if_not_set name value) |
| IF(NOT DEFINED "${name}") |
| SET(${name} "${value}") |
| ENDIF(NOT DEFINED "${name}") |
| ENDMACRO(cpack_set_if_not_set) |
| |
| # Macro to encode variables for the configuration file |
| # find any varable that stars with CPACK and create a variable |
| # _CPACK_OTHER_VARIABLES_ that contains SET commands for |
| # each cpack variable. _CPACK_OTHER_VARIABLES_ is then |
| # used as an @ replacment in configure_file for the CPackConfig. |
| MACRO(cpack_encode_variables) |
| SET(_CPACK_OTHER_VARIABLES_) |
| GET_CMAKE_PROPERTY(res VARIABLES) |
| FOREACH(var ${res}) |
| IF("xxx${var}" MATCHES "xxxCPACK") |
| SET(_CPACK_OTHER_VARIABLES_ |
| "${_CPACK_OTHER_VARIABLES_}\nSET(${var} \"${${var}}\")") |
| ENDIF("xxx${var}" MATCHES "xxxCPACK") |
| ENDFOREACH(var ${res}) |
| ENDMACRO(cpack_encode_variables) |
| |
| # Set the package name |
| cpack_set_if_not_set(CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}") |
| cpack_set_if_not_set(CPACK_PACKAGE_VERSION_MAJOR "0") |
| cpack_set_if_not_set(CPACK_PACKAGE_VERSION_MINOR "1") |
| cpack_set_if_not_set(CPACK_PACKAGE_VERSION_PATCH "1") |
| cpack_set_if_not_set(CPACK_PACKAGE_VERSION |
| "${CPACK_PACKAGE_VERSION_MAJOR}.${CPACK_PACKAGE_VERSION_MINOR}.${CPACK_PACKAGE_VERSION_PATCH}") |
| cpack_set_if_not_set(CPACK_PACKAGE_VENDOR "Humanity") |
| cpack_set_if_not_set(CPACK_PACKAGE_DESCRIPTION_SUMMARY |
| "${CMAKE_PROJECT_NAME} built using CMake") |
| |
| cpack_set_if_not_set(CPACK_PACKAGE_DESCRIPTION_FILE |
| "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt") |
| cpack_set_if_not_set(CPACK_RESOURCE_FILE_LICENSE |
| "${CMAKE_ROOT}/Templates/CPack.GenericLicense.txt") |
| cpack_set_if_not_set(CPACK_RESOURCE_FILE_README |
| "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt") |
| cpack_set_if_not_set(CPACK_RESOURCE_FILE_WELCOME |
| "${CMAKE_ROOT}/Templates/CPack.GenericWelcome.txt") |
| |
| cpack_set_if_not_set(CPACK_MODULE_PATH "${CMAKE_MODULE_PATH}") |
| |
| IF(CPACK_NSIS_MODIFY_PATH) |
| SET(CPACK_NSIS_MODIFY_PATH ON) |
| ENDIF(CPACK_NSIS_MODIFY_PATH) |
| |
| SET(__cpack_system_name ${CMAKE_SYSTEM_NAME}) |
| IF(${__cpack_system_name} MATCHES Windows) |
| IF(CMAKE_CL_64) |
| SET(__cpack_system_name win64) |
| ELSE(CMAKE_CL_64) |
| SET(__cpack_system_name win32) |
| ENDIF(CMAKE_CL_64) |
| ENDIF(${__cpack_system_name} MATCHES Windows) |
| cpack_set_if_not_set(CPACK_SYSTEM_NAME "${__cpack_system_name}") |
| |
| # <project>-<major>.<minor>.<patch>-<release>-<platform>.<pkgtype> |
| cpack_set_if_not_set(CPACK_PACKAGE_FILE_NAME |
| "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}") |
| cpack_set_if_not_set(CPACK_PACKAGE_INSTALL_DIRECTORY |
| "${CPACK_PACKAGE_NAME} ${CPACK_PACKAGE_VERSION}") |
| cpack_set_if_not_set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY |
| "${CPACK_PACKAGE_NAME} ${CPACK_PACKAGE_VERSION}") |
| cpack_set_if_not_set(CPACK_PACKAGE_DEFAULT_LOCATION "/") |
| cpack_set_if_not_set(CPACK_PACKAGE_RELOCATABLE "true") |
| |
| # always force to exactly "true" or "false" for CPack.Info.plist.in: |
| if(CPACK_PACKAGE_RELOCATABLE) |
| set(CPACK_PACKAGE_RELOCATABLE "true") |
| else(CPACK_PACKAGE_RELOCATABLE) |
| set(CPACK_PACKAGE_RELOCATABLE "false") |
| endif(CPACK_PACKAGE_RELOCATABLE) |
| |
| macro(cpack_check_file_exists file description) |
| if(NOT EXISTS "${file}") |
| message(SEND_ERROR "CPack ${description} file: \"${file}\" could not be found.") |
| endif(NOT EXISTS "${file}") |
| endmacro(cpack_check_file_exists) |
| |
| cpack_check_file_exists("${CPACK_PACKAGE_DESCRIPTION_FILE}" "package description") |
| cpack_check_file_exists("${CPACK_RESOURCE_FILE_LICENSE}" "license resource") |
| cpack_check_file_exists("${CPACK_RESOURCE_FILE_README}" "readme resource") |
| cpack_check_file_exists("${CPACK_RESOURCE_FILE_WELCOME}" "welcome resource") |
| |
| macro(cpack_optional_append _list _cond _item) |
| if(${_cond}) |
| set(${_list} ${${_list}} ${_item}) |
| endif(${_cond}) |
| endmacro(cpack_optional_append _list _cond _item) |
| |
| # Provide options to choose generators |
| # we might check here if the required tools for the generates exist |
| # and set the defaults according to the results |
| if(NOT CPACK_GENERATOR) |
| if(UNIX) |
| if(CYGWIN) |
| option(CPACK_BINARY_CYGWIN "Enable to build Cygwin binary packages" ON) |
| else(CYGWIN) |
| if(APPLE) |
| option(CPACK_BINARY_BUNDLE "Enable to build OSX bundles" OFF) |
| option(CPACK_BINARY_DRAGNDROP "Enable to build OSX Drag And Drop package" OFF) |
| option(CPACK_BINARY_PACKAGEMAKER "Enable to build PackageMaker packages" ON) |
| option(CPACK_BINARY_OSXX11 "Enable to build OSX X11 packages" OFF) |
| else(APPLE) |
| option(CPACK_BINARY_TZ "Enable to build TZ packages" ON) |
| endif(APPLE) |
| option(CPACK_BINARY_STGZ "Enable to build STGZ packages" ON) |
| option(CPACK_BINARY_TGZ "Enable to build TGZ packages" ON) |
| option(CPACK_BINARY_TBZ2 "Enable to build TBZ2 packages" OFF) |
| option(CPACK_BINARY_DEB "Enable to build Debian packages" OFF) |
| option(CPACK_BINARY_RPM "Enable to build RPM packages" OFF) |
| option(CPACK_BINARY_NSIS "Enable to build NSIS packages" OFF) |
| endif(CYGWIN) |
| else(UNIX) |
| option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON) |
| option(CPACK_BINARY_ZIP "Enable to build ZIP packages" OFF) |
| endif(UNIX) |
| |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_BUNDLE Bundle) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DRAGNDROP DragNDrop) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_PACKAGEMAKER PackageMaker) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_OSXX11 OSXX11) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_CYGWIN CygwinBinary) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DEB DEB) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_RPM RPM) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_NSIS NSIS) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_STGZ STGZ) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TGZ TGZ) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TBZ2 TBZ2) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TZ TZ) |
| cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_ZIP ZIP) |
| |
| endif(NOT CPACK_GENERATOR) |
| |
| # Provide options to choose source generators |
| if(NOT CPACK_SOURCE_GENERATOR) |
| if(UNIX) |
| if(CYGWIN) |
| option(CPACK_SOURCE_CYGWIN "Enable to build Cygwin source packages" ON) |
| else(CYGWIN) |
| option(CPACK_SOURCE_TBZ2 "Enable to build TBZ2 source packages" ON) |
| option(CPACK_SOURCE_TGZ "Enable to build TGZ source packages" ON) |
| option(CPACK_SOURCE_TZ "Enable to build TZ source packages" ON) |
| option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" OFF) |
| endif(CYGWIN) |
| else(UNIX) |
| option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" ON) |
| endif(UNIX) |
| |
| cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_CYGWIN CygwinSource) |
| cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TGZ TGZ) |
| cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TBZ2 TBZ2) |
| cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_TZ TZ) |
| cpack_optional_append(CPACK_SOURCE_GENERATOR CPACK_SOURCE_ZIP ZIP) |
| endif(NOT CPACK_SOURCE_GENERATOR) |
| |
| # mark the above options as advanced |
| mark_as_advanced(CPACK_BINARY_CYGWIN CPACK_BINARY_PACKAGEMAKER CPACK_BINARY_OSXX11 |
| CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2 |
| CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ |
| CPACK_BINARY_NSIS CPACK_BINARY_ZIP CPACK_BINARY_BUNDLE |
| CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ |
| CPACK_SOURCE_TZ CPACK_SOURCE_ZIP CPACK_BINARY_DRAGNDROP) |
| |
| # Set some other variables |
| cpack_set_if_not_set(CPACK_INSTALL_CMAKE_PROJECTS |
| "${CMAKE_BINARY_DIR};${CMAKE_PROJECT_NAME};ALL;/") |
| cpack_set_if_not_set(CPACK_CMAKE_GENERATOR "${CMAKE_GENERATOR}") |
| cpack_set_if_not_set(CPACK_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}") |
| # if the user has set CPACK_NSIS_DISPLAY_NAME remember it |
| if(DEFINED CPACK_NSIS_DISPLAY_NAME) |
| SET(CPACK_NSIS_DISPLAY_NAME_SET TRUE) |
| endif() |
| # if the user has set CPACK_NSIS_DISPLAY |
| # explicitly, then use that as the default |
| # value of CPACK_NSIS_PACKAGE_NAME instead |
| # of CPACK_PACKAGE_INSTALL_DIRECTORY |
| cpack_set_if_not_set(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}") |
| |
| if(CPACK_NSIS_DISPLAY_NAME_SET) |
| string(REPLACE "\\" "\\\\" |
| _NSIS_DISPLAY_NAME_TMP "${CPACK_NSIS_DISPLAY_NAME}") |
| cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${_NSIS_DISPLAY_NAME_TMP}") |
| else() |
| cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}") |
| endif() |
| |
| cpack_set_if_not_set(CPACK_OUTPUT_CONFIG_FILE |
| "${CMAKE_BINARY_DIR}/CPackConfig.cmake") |
| |
| cpack_set_if_not_set(CPACK_SOURCE_OUTPUT_CONFIG_FILE |
| "${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake") |
| |
| cpack_set_if_not_set(CPACK_SET_DESTDIR OFF) |
| cpack_set_if_not_set(CPACK_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}") |
| |
| cpack_set_if_not_set(CPACK_NSIS_INSTALLER_ICON_CODE "") |
| cpack_set_if_not_set(CPACK_NSIS_INSTALLER_MUI_ICON_CODE "") |
| |
| IF(DEFINED CPACK_COMPONENTS_ALL) |
| IF(CPACK_MONOLITHIC_INSTALL) |
| MESSAGE("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.") |
| SET(CPACK_COMPONENTS_ALL) |
| ELSE(CPACK_MONOLITHIC_INSTALL) |
| # The user has provided the set of components to be installed as |
| # part of a component-based installation; trust her. |
| SET(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE) |
| ENDIF(CPACK_MONOLITHIC_INSTALL) |
| ELSE(DEFINED CPACK_COMPONENTS_ALL) |
| # If the user has not specifically requested a monolithic installer |
| # but has specified components in various "install" commands, tell |
| # CPack about those components. |
| IF(NOT CPACK_MONOLITHIC_INSTALL) |
| GET_CMAKE_PROPERTY(CPACK_COMPONENTS_ALL COMPONENTS) |
| LIST(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN) |
| IF(CPACK_COMPONENTS_LEN EQUAL 1) |
| # Only one component: this is not a component-based installation |
| # (at least, it isn't a component-based installation, but may |
| # become one later if the user uses the cpack_add_* commands). |
| SET(CPACK_COMPONENTS_ALL) |
| ENDIF(CPACK_COMPONENTS_LEN EQUAL 1) |
| SET(CPACK_COMPONENTS_LEN) |
| ENDIF(NOT CPACK_MONOLITHIC_INSTALL) |
| ENDIF(DEFINED CPACK_COMPONENTS_ALL) |
| |
| # CMake always generates a component named "Unspecified", which is |
| # used to install everything that doesn't have an explicitly-provided |
| # component. Since these files should always be installed, we'll make |
| # them hidden and required. |
| set(CPACK_COMPONENT_UNSPECIFIED_HIDDEN TRUE) |
| set(CPACK_COMPONENT_UNSPECIFIED_REQUIRED TRUE) |
| |
| cpack_encode_variables() |
| configure_file("${cpack_input_file}" "${CPACK_OUTPUT_CONFIG_FILE}" @ONLY IMMEDIATE) |
| |
| # Generate source file |
| cpack_set_if_not_set(CPACK_SOURCE_INSTALLED_DIRECTORIES |
| "${CMAKE_SOURCE_DIR};/") |
| cpack_set_if_not_set(CPACK_SOURCE_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}-Source") |
| cpack_set_if_not_set(CPACK_SOURCE_PACKAGE_FILE_NAME |
| "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-Source") |
| cpack_set_if_not_set(CPACK_SOURCE_IGNORE_FILES |
| "/CVS/;/\\\\\\\\.svn/;/\\\\\\\\.bzr/;/\\\\\\\\.hg/;/\\\\\\\\.git/;\\\\\\\\.swp$;\\\\\\\\.#;/#") |
| SET(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}") |
| SET(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}") |
| SET(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}") |
| SET(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}") |
| SET(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}") |
| SET(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}") |
| SET(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}") |
| |
| cpack_encode_variables() |
| configure_file("${cpack_source_input_file}" |
| "${CPACK_SOURCE_OUTPUT_CONFIG_FILE}" @ONLY IMMEDIATE) |