Help/command/add_custom_command.rst

add_custom_command
------------------

Add a custom build rule to the generated build system.

There are two main signatures for ``add_custom_command``.

Generating Files
^^^^^^^^^^^^^^^^

The first signature is for adding a custom command to produce an output:

.. code-block:: cmake

  add_custom_command(OUTPUT output1 [output2 ...]
                     COMMAND command1 [ARGS] [args1...]
                     [COMMAND command2 [ARGS] [args2...] ...]
                     [MAIN_DEPENDENCY depend]
                     [DEPENDS [depends...]]
                     [BYPRODUCTS [files...]]
                     [IMPLICIT_DEPENDS <lang1> depend1
                                      [<lang2> depend2] ...]
                     [WORKING_DIRECTORY dir]
                     [COMMENT comment]
                     [DEPFILE depfile]
                     [JOB_POOL job_pool]
                     [JOB_SERVER_AWARE <bool>]
                     [VERBATIM] [APPEND] [USES_TERMINAL]
                     [COMMAND_EXPAND_LISTS]
                     [DEPENDS_EXPLICIT_ONLY])

This defines a command to generate specified ``OUTPUT`` file(s).
A target created in the same directory (``CMakeLists.txt`` file)
that specifies any output of the custom command as a source file
is given a rule to generate the file using the command at build time.

Do not list the output in more than one independent target that
may build in parallel or the instances of the rule may conflict.
Instead, use the :command:`add_custom_target` command to drive the
command and make the other targets depend on that one.  See the
`Example: Generating Files for Multiple Targets`_ below.

The options are:

``APPEND``
  Append the ``COMMAND`` and ``DEPENDS`` option values to the custom
  command for the first output specified.  There must have already
  been a previous call to this command with the same output.

  If the previous call specified the output via a generator expression,
  the output specified by the current call must match in at least one
  configuration after evaluating generator expressions.  In this case,
  the appended commands and dependencies apply to all configurations.

  The ``COMMENT``, ``MAIN_DEPENDENCY``, and ``WORKING_DIRECTORY``
  options are currently ignored when APPEND is given, but may be
  used in the future.

``BYPRODUCTS``
  .. versionadded:: 3.2

  Specify the files the command is expected to produce but whose
  modification time may or may not be newer than the dependencies.
  If a byproduct name is a relative path it will be interpreted
  relative to the build tree directory corresponding to the
  current source directory.
  Each byproduct file will be marked with the :prop_sf:`GENERATED`
  source file property automatically.

  *See policy* :policy:`CMP0058` *for the motivation behind this feature.*

  Explicit specification of byproducts is supported by the
  :generator:`Ninja` generator to tell the ``ninja`` build tool
  how to regenerate byproducts when they are missing.  It is
  also useful when other build rules (e.g. custom commands)
  depend on the byproducts.  Ninja requires a build rule for any
  generated file on which another rule depends even if there are
  order-only dependencies to ensure the byproducts will be
  available before their dependents build.

  The :ref:`Makefile Generators` will remove ``BYPRODUCTS`` and other
  :prop_sf:`GENERATED` files during ``make clean``.

  .. versionadded:: 3.20
    Arguments to ``BYPRODUCTS`` may use a restricted set of
    :manual:`generator expressions <cmake-generator-expressions(7)>`.
    :ref:`Target-dependent expressions <Target-Dependent Expressions>`
    are not permitted.

  .. versionchanged:: 3.28
    In targets using :ref:`file sets`, custom command byproducts are now
    considered private unless they are listed in a non-private file set.
    See policy :policy:`CMP0154`.

``COMMAND``
  Specify the command-line(s) to execute at build time.
  If more than one ``COMMAND`` is specified they will be executed in order,
  but *not* necessarily composed into a stateful shell or batch script.
  (To run a full script, use the :command:`configure_file` command or the
  :command:`file(GENERATE)` command to create it, and then specify
  a ``COMMAND`` to launch it.)
  The optional ``ARGS`` argument is for backward compatibility and
  will be ignored.

  If ``COMMAND`` specifies an executable target name (created by the
  :command:`add_executable` command), it will automatically be replaced
  by the location of the executable created at build time if either of
  the following is true:

  * The target is not being cross-compiled (i.e. the
    :variable:`CMAKE_CROSSCOMPILING` variable is not set to true).
  * .. versionadded:: 3.6
      The target is being cross-compiled and an emulator is provided (i.e.
      its :prop_tgt:`CROSSCOMPILING_EMULATOR` target property is set).
      In this case, the contents of :prop_tgt:`CROSSCOMPILING_EMULATOR` will be
      prepended to the command before the location of the target executable.

  If neither of the above conditions are met, it is assumed that the
  command name is a program to be found on the ``PATH`` at build time.

  Arguments to ``COMMAND`` may use
  :manual:`generator expressions <cmake-generator-expressions(7)>`.
  Use the :genex:`TARGET_FILE` generator expression to refer to the location
  of a target later in the command line (i.e. as a command argument rather
  than as the command to execute).

  Whenever one of the following target based generator expressions are used as
  a command to execute or is mentioned in a command argument, a target-level
  dependency will be added automatically so that the mentioned target will be
  built before any target using this custom command
  (see policy :policy:`CMP0112`).

    * ``TARGET_FILE``
    * ``TARGET_LINKER_FILE``
    * ``TARGET_SONAME_FILE``
    * ``TARGET_PDB_FILE``

  This target-level dependency does NOT add a file-level dependency that would
  cause the custom command to re-run whenever the executable is recompiled.
  List target names with the ``DEPENDS`` option to add such file-level
  dependencies.


``COMMENT``
  Display the given message before the commands are executed at
  build time.

  .. versionadded:: 3.26
    Arguments to ``COMMENT`` may use
    :manual:`generator expressions <cmake-generator-expressions(7)>`.

``DEPENDS``
  Specify files on which the command depends.  Each argument is converted
  to a dependency as follows:

  1. If the argument is the name of a target (created by the
     :command:`add_custom_target`, :command:`add_executable`, or
     :command:`add_library` command) a target-level dependency is
     created to make sure the target is built before any target
     using this custom command.  Additionally, if the target is an
     executable or library, a file-level dependency is created to
     cause the custom command to re-run whenever the target is
     recompiled.

  2. If the argument is an absolute path, a file-level dependency
     is created on that path.

  3. If the argument is the name of a source file that has been
     added to a target or on which a source file property has been set,
     a file-level dependency is created on that source file.

  4. If the argument is a relative path and it exists in the current
     source directory, a file-level dependency is created on that
     file in the current source directory.

  5. Otherwise, a file-level dependency is created on that path relative
     to the current binary directory.

  If any dependency is an ``OUTPUT`` of another custom command in the same
  directory (``CMakeLists.txt`` file), CMake automatically brings the other
  custom command into the target in which this command is built.

  .. versionadded:: 3.16
    A target-level dependency is added if any dependency is listed as
    ``BYPRODUCTS`` of a target or any of its build events in the same
    directory to ensure the byproducts will be available.

  If ``DEPENDS`` is not specified, the command will run whenever
  the ``OUTPUT`` is missing; if the command does not actually
  create the ``OUTPUT``, the rule will always run.

  .. versionadded:: 3.1
    Arguments to ``DEPENDS`` may use
    :manual:`generator expressions <cmake-generator-expressions(7)>`.

``COMMAND_EXPAND_LISTS``
  .. versionadded:: 3.8

  Lists in ``COMMAND`` arguments will be expanded, including those
  created with
  :manual:`generator expressions <cmake-generator-expressions(7)>`,
  allowing ``COMMAND`` arguments such as
  ``${CC} "-I$<JOIN:$<TARGET_PROPERTY:foo,INCLUDE_DIRECTORIES>,;-I>" foo.cc``
  to be properly expanded.

``IMPLICIT_DEPENDS``
  Request scanning of implicit dependencies of an input file.
  The language given specifies the programming language whose
  corresponding dependency scanner should be used.
  Currently only ``C`` and ``CXX`` language scanners are supported.
  The language has to be specified for every file in the
  ``IMPLICIT_DEPENDS`` list.  Dependencies discovered from the
  scanning are added to those of the custom command at build time.
  Note that the ``IMPLICIT_DEPENDS`` option is currently supported
  only for Makefile generators and will be ignored by other generators.

  .. note::

    This option cannot be specified at the same time as ``DEPFILE`` option.

``JOB_POOL``
  .. versionadded:: 3.15

  Specify a :prop_gbl:`pool <JOB_POOLS>` for the :generator:`Ninja`
  generator. Incompatible with ``USES_TERMINAL``, which implies
  the ``console`` pool.
  Using a pool that is not defined by :prop_gbl:`JOB_POOLS` causes
  an error by ninja at build time.

``JOB_SERVER_AWARE``
  .. versionadded:: 3.28

  Specify that the command is GNU Make job server aware.

  For the :generator:`Unix Makefiles`, :generator:`MSYS Makefiles`, and
  :generator:`MinGW Makefiles` generators this will add the ``+`` prefix to the
  recipe line. See the `GNU Make Documentation`_ for more information.

  This option is silently ignored by other generators.

.. _`GNU Make Documentation`: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html

``MAIN_DEPENDENCY``
  Specify the primary input source file to the command.  This is
  treated just like any value given to the ``DEPENDS`` option
  but also suggests to Visual Studio generators where to hang
  the custom command. Each source file may have at most one command
  specifying it as its main dependency. A compile command (i.e. for a
  library or an executable) counts as an implicit main dependency which
  gets silently overwritten by a custom command specification.

``OUTPUT``
  Specify the output files the command is expected to produce.
  Each output file will be marked with the :prop_sf:`GENERATED`
  source file property automatically.
  If the output of the custom command is not actually created
  as a file on disk it should be marked with the :prop_sf:`SYMBOLIC`
  source file property.

  If an output file name is a relative path, its absolute path is
  determined by interpreting it relative to:

  1. the build directory corresponding to the current source directory
     (:variable:`CMAKE_CURRENT_BINARY_DIR`), or

  2. the current source directory (:variable:`CMAKE_CURRENT_SOURCE_DIR`).

  The path in the build directory is preferred unless the path in the
  source tree is mentioned as an absolute source file path elsewhere
  in the current directory.

  .. versionadded:: 3.20
    Arguments to ``OUTPUT`` may use a restricted set of
    :manual:`generator expressions <cmake-generator-expressions(7)>`.
    :ref:`Target-dependent expressions <Target-Dependent Expressions>`
    are not permitted.

  .. versionchanged:: 3.28
    In targets using :ref:`file sets`, custom command outputs are now
    considered private unless they are listed in a non-private file set.
    See policy :policy:`CMP0154`.

``USES_TERMINAL``
  .. versionadded:: 3.2

  The command will be given direct access to the terminal if possible.
  With the :generator:`Ninja` generator, this places the command in
  the ``console`` :prop_gbl:`pool <JOB_POOLS>`.

``VERBATIM``
  All arguments to the commands will be escaped properly for the
  build tool so that the invoked command receives each argument
  unchanged.  Note that one level of escapes is still used by the
  CMake language processor before add_custom_command even sees the
  arguments.  Use of ``VERBATIM`` is recommended as it enables
  correct behavior.  When ``VERBATIM`` is not given the behavior
  is platform specific because there is no protection of
  tool-specific special characters.

``WORKING_DIRECTORY``
  Execute the command with the given current working directory.
  If it is a relative path it will be interpreted relative to the
  build tree directory corresponding to the current source directory.

  .. versionadded:: 3.13
    Arguments to ``WORKING_DIRECTORY`` may use
    :manual:`generator expressions <cmake-generator-expressions(7)>`.

``DEPFILE``
  .. versionadded:: 3.7

  Specify a depfile which holds dependencies for the custom command. It is
  usually emitted by the custom command itself.  This keyword may only be used
  if the generator supports it, as detailed below.

  The expected format, compatible with what is generated by ``gcc`` with the
  option ``-M``, is independent of the generator or platform.

  The formal syntax, as specified using
  `BNF <https://en.wikipedia.org/wiki/Backus%E2%80%93Naur_form>`_ notation with
  the regular extensions, is the following:

  .. raw:: latex

    \begin{small}

  .. productionlist:: depfile
    depfile: `rule`*
    rule: `targets` (':' (`separator` `dependencies`?)?)? `eol`
    targets: `target` (`separator` `target`)* `separator`*
    target: `pathname`
    dependencies: `dependency` (`separator` `dependency`)* `separator`*
    dependency: `pathname`
    separator: (`space` | `line_continue`)+
    line_continue: '\' `eol`
    space: ' ' | '\t'
    pathname: `character`+
    character: `std_character` | `dollar` | `hash` | `whitespace`
    std_character: <any character except '$', '#' or ' '>
    dollar: '$$'
    hash: '\#'
    whitespace: '\ '
    eol: '\r'? '\n'

  .. raw:: latex

    \end{small}

  .. note::

    As part of ``pathname``, any slash and backslash is interpreted as
    a directory separator.

  .. versionadded:: 3.7
    The :generator:`Ninja` generator supports ``DEPFILE`` since the keyword
    was first added.

  .. versionadded:: 3.17
    Added the :generator:`Ninja Multi-Config` generator, which included
    support for the ``DEPFILE`` keyword.

  .. versionadded:: 3.20
    Added support for :ref:`Makefile Generators`.

    .. note::

      ``DEPFILE`` cannot be specified at the same time as the
      ``IMPLICIT_DEPENDS`` option for :ref:`Makefile Generators`.

  .. versionadded:: 3.21
    Added support for :ref:`Visual Studio Generators` with VS 2012 and above,
    and for the :generator:`Xcode` generator.  Support for
    :manual:`generator expressions <cmake-generator-expressions(7)>` was also
    added.

  .. versionadded:: 3.29
    The :ref:`Ninja Generators` will now incorporate the dependencies into its
    "deps log" database if the file is not listed in ``OUTPUTS`` or
    ``BYPRODUCTS``.

  Using ``DEPFILE`` with generators other than those listed above is an error.

  If the ``DEPFILE`` argument is relative, it should be relative to
  :variable:`CMAKE_CURRENT_BINARY_DIR`, and any relative paths inside the
  ``DEPFILE`` should also be relative to :variable:`CMAKE_CURRENT_BINARY_DIR`.
  See policy :policy:`CMP0116`, which is always ``NEW`` for
  :ref:`Makefile Generators`, :ref:`Visual Studio Generators`,
  and the :generator:`Xcode` generator.

``DEPENDS_EXPLICIT_ONLY``

  .. versionadded:: 3.27

  Indicates that the command's ``DEPENDS`` argument represents all files
  required by the command and implicit dependencies are not required.

  Without this option, if any target uses the output of the custom command,
  CMake will consider that target's dependencies as implicit dependencies for
  the custom command in case this custom command requires files implicitly
  created by those targets.

  This option can be enabled on all custom commands by setting
  :variable:`CMAKE_ADD_CUSTOM_COMMAND_DEPENDS_EXPLICIT_ONLY` to ``ON``.

  Only the :ref:`Ninja Generators` actually use this information to remove
  unnecessary implicit dependencies.

  See also the :prop_tgt:`OPTIMIZE_DEPENDENCIES` target property, which may
  provide another way for reducing the impact of target dependencies in some
  scenarios.

Examples: Generating Files
^^^^^^^^^^^^^^^^^^^^^^^^^^

Custom commands may be used to generate source files.
For example, the code:

.. code-block:: cmake

  add_custom_command(
    OUTPUT out.c
    COMMAND someTool -i ${CMAKE_CURRENT_SOURCE_DIR}/in.txt
                     -o out.c
    DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/in.txt
    VERBATIM)
  add_library(myLib out.c)

adds a custom command to run ``someTool`` to generate ``out.c`` and then
compile the generated source as part of a library.  The generation rule
will re-run whenever ``in.txt`` changes.

.. versionadded:: 3.20
  One may use generator expressions to specify per-configuration outputs.
  For example, the code:

  .. code-block:: cmake

    add_custom_command(
      OUTPUT "out-$<CONFIG>.c"
      COMMAND someTool -i ${CMAKE_CURRENT_SOURCE_DIR}/in.txt
                       -o "out-$<CONFIG>.c"
                       -c "$<CONFIG>"
      DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/in.txt
      VERBATIM)
    add_library(myLib "out-$<CONFIG>.c")

  adds a custom command to run ``someTool`` to generate ``out-<config>.c``,
  where ``<config>`` is the build configuration, and then compile the generated
  source as part of a library.

Example: Generating Files for Multiple Targets
""""""""""""""""""""""""""""""""""""""""""""""

If multiple independent targets need the same custom command output,
it must be attached to a single custom target on which they all depend.
Consider the following example:

.. code-block:: cmake

  add_custom_command(
    OUTPUT table.csv
    COMMAND makeTable -i ${CMAKE_CURRENT_SOURCE_DIR}/input.dat
                      -o table.csv
    DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/input.dat
    VERBATIM)
  add_custom_target(generate_table_csv DEPENDS table.csv)

  add_custom_command(
    OUTPUT foo.cxx
    COMMAND genFromTable -i table.csv -case foo -o foo.cxx
    DEPENDS table.csv           # file-level dependency
            generate_table_csv  # target-level dependency
    VERBATIM)
  add_library(foo foo.cxx)

  add_custom_command(
    OUTPUT bar.cxx
    COMMAND genFromTable -i table.csv -case bar -o bar.cxx
    DEPENDS table.csv           # file-level dependency
            generate_table_csv  # target-level dependency
    VERBATIM)
  add_library(bar bar.cxx)

Output ``foo.cxx`` is needed only by target ``foo`` and output ``bar.cxx``
is needed only by target ``bar``, but *both* targets need ``table.csv``,
transitively.  Since ``foo`` and ``bar`` are independent targets that may
build concurrently, we prevent them from racing to generate ``table.csv``
by placing its custom command in a separate target, ``generate_table_csv``.
The custom commands generating ``foo.cxx`` and ``bar.cxx`` each specify a
target-level dependency on ``generate_table_csv``, so the targets using them,
``foo`` and ``bar``, will not build until after target ``generate_table_csv``
is built.

.. _`add_custom_command(TARGET)`:

Build Events
^^^^^^^^^^^^

The second signature adds a custom command to a target such as a
library or executable.  This is useful for performing an operation
before or after building the target.  The command becomes part of the
target and will only execute when the target itself is built.  If the
target is already built, the command will not execute.

.. code-block:: cmake

  add_custom_command(TARGET <target>
                     PRE_BUILD | PRE_LINK | POST_BUILD
                     COMMAND command1 [ARGS] [args1...]
                     [COMMAND command2 [ARGS] [args2...] ...]
                     [BYPRODUCTS [files...]]
                     [WORKING_DIRECTORY dir]
                     [COMMENT comment]
                     [VERBATIM]
                     [COMMAND_EXPAND_LISTS])

This defines a new command that will be associated with building the
specified ``<target>``.  The ``<target>`` must be defined in the current
directory; targets defined in other directories may not be specified.

When the command will happen is determined by which
of the following is specified:

``PRE_BUILD``
  This option has unique behavior for the :ref:`Visual Studio Generators`.
  When using one of the Visual Studio generators, the command will run before
  any other rules are executed within the target.  With all other generators,
  this option behaves the same as ``PRE_LINK`` instead.  Because of this,
  it is recommended to avoid using ``PRE_BUILD`` except when it is known that
  a Visual Studio generator is being used.
``PRE_LINK``
  Run after sources have been compiled but before linking the binary
  or running the librarian or archiver tool of a static library.
  This is not defined for targets created by the
  :command:`add_custom_target` command.
``POST_BUILD``
  Run after all other rules within the target have been executed.

Projects should always specify one of the above three keywords when using
the ``TARGET`` form.  For backward compatibility reasons, ``POST_BUILD`` is
assumed if no such keyword is given, but projects should explicitly provide
one of the keywords to make clear the behavior they expect.

.. note::
  Because generator expressions can be used in custom commands,
  it is possible to define ``COMMAND`` lines or whole custom commands
  which evaluate to empty strings for certain configurations.
  For **Visual Studio 12 2013 (and newer)** generators these command
  lines or custom commands will be omitted for the specific
  configuration and no "empty-string-command" will be added.

  This allows adding individual build events for every configuration.

.. versionadded:: 3.21
  Support for target-dependent generator expressions.

.. versionadded:: 3.29
  The ``<target>`` may be an :ref:`ALIAS target <Alias Targets>`.

Examples: Build Events
^^^^^^^^^^^^^^^^^^^^^^

A ``POST_BUILD`` event may be used to post-process a binary after linking.
For example, the code:

.. code-block:: cmake

  add_executable(myExe myExe.c)
  add_custom_command(
    TARGET myExe POST_BUILD
    COMMAND someHasher -i "$<TARGET_FILE:myExe>"
                       -o "$<TARGET_FILE:myExe>.hash"
    VERBATIM)

will run ``someHasher`` to produce a ``.hash`` file next to the executable
after linking.

.. versionadded:: 3.20
  One may use generator expressions to specify per-configuration byproducts.
  For example, the code:

  .. code-block:: cmake

    add_library(myPlugin MODULE myPlugin.c)
    add_custom_command(
      TARGET myPlugin POST_BUILD
      COMMAND someHasher -i "$<TARGET_FILE:myPlugin>"
                         --as-code "myPlugin-hash-$<CONFIG>.c"
      BYPRODUCTS "myPlugin-hash-$<CONFIG>.c"
      VERBATIM)
    add_executable(myExe myExe.c "myPlugin-hash-$<CONFIG>.c")

  will run ``someHasher`` after linking ``myPlugin``, e.g. to produce a ``.c``
  file containing code to check the hash of ``myPlugin`` that the ``myExe``
  executable can use to verify it before loading.

Ninja Multi-Config
^^^^^^^^^^^^^^^^^^

.. versionadded:: 3.20

  ``add_custom_command`` supports the :generator:`Ninja Multi-Config`
  generator's cross-config capabilities. See the generator documentation
  for more information.

See Also
^^^^^^^^

* :command:`add_custom_target`