| # Distributed under the OSI-approved BSD 3-Clause License. See accompanying |
| # file Copyright.txt or https://cmake.org/licensing for details. |
| |
| #[=======================================================================[.rst: |
| FindPython3 |
| ----------- |
| |
| Find Python 3 interpreter, compiler and development environment (include |
| directories and libraries). |
| |
| Three components are supported: |
| |
| * ``Interpreter``: search for Python 3 interpreter |
| * ``Compiler``: search for Python 3 compiler. Only offered by IronPython. |
| * ``Development``: search for development artifacts (include directories and |
| libraries) |
| * ``NumPy``: search for NumPy include directories. |
| |
| If no ``COMPONENTS`` is specified, ``Interpreter`` is assumed. |
| |
| To ensure consistent versions between components ``Interpreter``, ``Compiler``, |
| ``Development`` and ``NumPy``, specify all components at the same time:: |
| |
| find_package (Python3 COMPONENTS Interpreter Development) |
| |
| This module looks only for version 3 of Python. This module can be used |
| concurrently with :module:`FindPython2` module to use both Python versions. |
| |
| The :module:`FindPython` module can be used if Python version does not matter |
| for you. |
| |
| .. note:: |
| |
| If components ``Interpreter`` and ``Development`` are both specified, this |
| module search only for interpreter with same platform architecture as the one |
| defined by ``CMake`` configuration. This contraint does not apply if only |
| ``Interpreter`` component is specified. |
| |
| Imported Targets |
| ^^^^^^^^^^^^^^^^ |
| |
| This module defines the following :ref:`Imported Targets <Imported Targets>` |
| (when :prop_gbl:`CMAKE_ROLE` is ``PROJECT``): |
| |
| ``Python3::Interpreter`` |
| Python 3 interpreter. Target defined if component ``Interpreter`` is found. |
| ``Python3::Compiler`` |
| Python 3 compiler. Target defined if component ``Compiler`` is found. |
| ``Python3::Python`` |
| Python 3 library for Python embedding. Target defined if component |
| ``Development`` is found. |
| ``Python3::Module`` |
| Python 3 library for Python module. Target defined if component |
| ``Development`` is found. |
| ``Python3::NumPy`` |
| NumPy library for Python 3. Target defined if component ``NumPy`` is found. |
| |
| Result Variables |
| ^^^^^^^^^^^^^^^^ |
| |
| This module will set the following variables in your project |
| (see :ref:`Standard Variable Names <CMake Developer Standard Variable Names>`): |
| |
| ``Python3_FOUND`` |
| System has the Python 3 requested components. |
| ``Python3_Interpreter_FOUND`` |
| System has the Python 3 interpreter. |
| ``Python3_EXECUTABLE`` |
| Path to the Python 3 interpreter. |
| ``Python3_INTERPRETER_ID`` |
| A short string unique to the interpreter. Possible values include: |
| * Python |
| * ActivePython |
| * Anaconda |
| * Canopy |
| * IronPython |
| ``Python3_STDLIB`` |
| Standard platform independent installation directory. |
| |
| Information returned by |
| ``distutils.sysconfig.get_python_lib(plat_specific=False,standard_lib=True)``. |
| ``Python3_STDARCH`` |
| Standard platform dependent installation directory. |
| |
| Information returned by |
| ``distutils.sysconfig.get_python_lib(plat_specific=True,standard_lib=True)``. |
| ``Python3_SITELIB`` |
| Third-party platform independent installation directory. |
| |
| Information returned by |
| ``distutils.sysconfig.get_python_lib(plat_specific=False,standard_lib=False)``. |
| ``Python3_SITEARCH`` |
| Third-party platform dependent installation directory. |
| |
| Information returned by |
| ``distutils.sysconfig.get_python_lib(plat_specific=True,standard_lib=False)``. |
| ``Python3_Compiler_FOUND`` |
| System has the Python 3 compiler. |
| ``Python3_COMPILER`` |
| Path to the Python 3 compiler. Only offered by IronPython. |
| ``Python3_COMPILER_ID`` |
| A short string unique to the compiler. Possible values include: |
| * IronPython |
| ``Python3_Development_FOUND`` |
| System has the Python 3 development artifacts. |
| ``Python3_INCLUDE_DIRS`` |
| The Python 3 include directories. |
| ``Python3_LIBRARIES`` |
| The Python 3 libraries. |
| ``Python3_LIBRARY_DIRS`` |
| The Python 3 library directories. |
| ``Python3_RUNTIME_LIBRARY_DIRS`` |
| The Python 3 runtime library directories. |
| ``Python3_VERSION`` |
| Python 3 version. |
| ``Python3_VERSION_MAJOR`` |
| Python 3 major version. |
| ``Python3_VERSION_MINOR`` |
| Python 3 minor version. |
| ``Python3_VERSION_PATCH`` |
| Python 3 patch version. |
| ``Python3_NumPy_FOUND`` |
| System has the NumPy. |
| ``Python3_NumPy_INCLUDE_DIRS`` |
| The NumPy include directries. |
| ``Python3_NumPy_VERSION`` |
| The NumPy version. |
| |
| Hints |
| ^^^^^ |
| |
| ``Python3_ROOT_DIR`` |
| Define the root directory of a Python 3 installation. |
| |
| ``Python3_USE_STATIC_LIBS`` |
| * If not defined, search for shared libraries and static libraries in that |
| order. |
| * If set to TRUE, search **only** for static libraries. |
| * If set to FALSE, search **only** for shared libraries. |
| |
| ``Python3_FIND_ABI`` |
| This variable defines which ABIs, as defined in |
| `PEP 3149 <https://www.python.org/dev/peps/pep-3149/>`_, should be searched. |
| |
| .. note:: |
| |
| If ``Python3_FIND_ABI`` is not defined, any ABI will be searched. |
| |
| The ``Python3_FIND_ABI`` variable is a 3-tuple specifying, in that order, |
| ``pydebug`` (``d``), ``pymalloc`` (``m``) and ``unicode`` (``u``) flags. |
| Each element can be set to one of the following: |
| |
| * ``ON``: Corresponding flag is selected. |
| * ``OFF``: Corresponding flag is not selected. |
| * ``ANY``: The two posibilties (``ON`` and ``OFF``) will be searched. |
| |
| From this 3-tuple, various ABIs will be searched starting from the most |
| specialized to the most general. Moreover, ``debug`` versions will be |
| searched **after** ``non-debug`` ones. |
| |
| For example, if we have:: |
| |
| set (Python3_FIND_ABI "ON" "ANY" "ANY") |
| |
| The following flags combinations will be appended, in that order, to the |
| artifact names: ``dmu``, ``dm``, ``du``, and ``d``. |
| |
| And to search any possible ABIs:: |
| |
| set (Python3_FIND_ABI "ANY" "ANY" "ANY") |
| |
| The following combinations, in that order, will be used: ``mu``, ``m``, |
| ``u``, ``<empty>``, ``dmu``, ``dm``, ``du`` and ``d``. |
| |
| .. note:: |
| |
| This hint is useful only on ``POSIX`` systems. So, on ``Windows`` systems, |
| when ``Python3_FIND_ABI`` is defined, ``Python`` distributions from |
| `python.org <https://www.python.org/>`_ will be found only if value for |
| each flag is ``OFF`` or ``ANY``. |
| |
| ``Python3_FIND_STRATEGY`` |
| This variable defines how lookup will be done. |
| The ``Python3_FIND_STRATEGY`` variable can be set to empty or one of the |
| following: |
| |
| * ``VERSION``: Try to find the most recent version in all specified |
| locations. |
| This is the default if policy :policy:`CMP0094` is undefined or set to |
| ``OLD``. |
| * ``LOCATION``: Stops lookup as soon as a version satisfying version |
| constraints is founded. |
| This is the default if policy :policy:`CMP0094` is set to ``NEW``. |
| |
| ``Python3_FIND_REGISTRY`` |
| On Windows the ``Python3_FIND_REGISTRY`` variable determine the order |
| of preference between registry and environment variables. |
| The ``Python3_FIND_REGISTRY`` variable can be set to empty or one of the |
| following: |
| |
| * ``FIRST``: Try to use registry before environment variables. |
| This is the default. |
| * ``LAST``: Try to use registry after environment variables. |
| * ``NEVER``: Never try to use registry. |
| |
| ``Python3_FIND_FRAMEWORK`` |
| On macOS the ``Python3_FIND_FRAMEWORK`` variable determine the order of |
| preference between Apple-style and unix-style package components. |
| This variable can be set to empty or take same values as |
| :variable:`CMAKE_FIND_FRAMEWORK` variable. |
| |
| .. note:: |
| |
| Value ``ONLY`` is not supported so ``FIRST`` will be used instead. |
| |
| If ``Python3_FIND_FRAMEWORK`` is not defined, :variable:`CMAKE_FIND_FRAMEWORK` |
| variable will be used, if any. |
| |
| ``Python3_FIND_VIRTUALENV`` |
| This variable defines the handling of virtual environments. It is meaningfull |
| only when a virtual environment is active (i.e. the ``activate`` script has |
| been evaluated). In this case, it takes precedence over |
| ``Python3_FIND_REGISTRY`` and ``CMAKE_FIND_FRAMEWORK`` variables. |
| The ``Python3_FIND_VIRTUALENV`` variable can be set to empty or one of the |
| following: |
| |
| * ``FIRST``: The virtual environment is used before any other standard |
| paths to look-up for the interpreter. This is the default. |
| * ``ONLY``: Only the virtual environment is used to look-up for the |
| interpreter. |
| * ``STANDARD``: The virtual environment is not used to look-up for the |
| interpreter. In this case, variable ``Python3_FIND_REGISTRY`` (Windows) |
| or ``CMAKE_FIND_FRAMEWORK`` (macOS) can be set with value ``LAST`` or |
| ``NEVER`` to select preferably the interpreter from the virtual |
| environment. |
| |
| Commands |
| ^^^^^^^^ |
| |
| This module defines the command ``Python_add_library`` (when |
| :prop_gbl:`CMAKE_ROLE` is ``PROJECT``), which has the same semantics as |
| :command:`add_library` and adds a dependency to target ``Python3::Python`` or, |
| when library type is ``MODULE``, to target ``Python3::Module`` and takes care |
| of Python module naming rules:: |
| |
| Python3_add_library (my_module MODULE src1.cpp) |
| |
| If library type is not specified, ``MODULE`` is assumed. |
| #]=======================================================================] |
| |
| |
| set (_PYTHON_PREFIX Python3) |
| |
| set (_Python3_REQUIRED_VERSION_MAJOR 3) |
| |
| include (${CMAKE_CURRENT_LIST_DIR}/FindPython/Support.cmake) |
| |
| if (COMMAND __Python3_add_library) |
| macro (Python3_add_library) |
| __Python3_add_library (Python3 ${ARGV}) |
| endmacro() |
| endif() |
| |
| unset (_PYTHON_PREFIX) |