| include(RunCMake) |
| |
| # Isolate our ctest runs from external environment. |
| unset(ENV{CTEST_PARALLEL_LEVEL}) |
| unset(ENV{CTEST_OUTPUT_ON_FAILURE}) |
| |
| if(RunCMake_GENERATOR STREQUAL "Borland Makefiles" OR |
| RunCMake_GENERATOR STREQUAL "Watcom WMake") |
| set(fs_delay 3) |
| else() |
| set(fs_delay 1.125) |
| endif() |
| |
| function(run_GoogleTest DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-build) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTest -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE}) |
| |
| run_cmake_command(GoogleTest-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target fake_gtest |
| ) |
| |
| run_cmake_command(GoogleTest-property-timeout-exe |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target property_timeout_test |
| ) |
| |
| run_cmake_command(GoogleTest-test1 |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -L TEST1 |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-test2 |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -L TEST2 |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-test3 |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -L TEST3 |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-test4 |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -L TEST4 |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-test-missing |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R no_tests_defined |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-property-timeout1 |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R property_timeout\\.case_no_discovery |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-property-timeout2 |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R property_timeout\\.case_with_discovery |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTest-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target skip_test |
| ) |
| |
| run_cmake_command(GoogleTest-skip-test |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R skip_test |
| --no-label-summary |
| ) |
| endfunction() |
| |
| function(run_GoogleTestLauncher DISCOVERY_MODE) |
| if(CMAKE_C_COMPILER_ID STREQUAL "MSVC" AND CMAKE_C_COMPILER_VERSION VERSION_LESS "14.0") |
| return() |
| endif() |
| if(CMAKE_VS_PLATFORM_NAME STREQUAL "ARM64" AND CMAKE_C_COMPILER_ID STREQUAL "MSVC" AND CMAKE_C_COMPILER_VERSION VERSION_LESS "19.36") |
| return() |
| endif() |
| |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTestLauncher-build) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| |
| run_cmake_with_options(GoogleTestLauncher |
| -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE} |
| ) |
| |
| set(RunCMake_TEST_NO_CLEAN 1) |
| |
| # do not issue any warnings on stderr that would cause the build to fail |
| set(RunCMake_TEST_OUTPUT_MERGE 1) |
| run_cmake_command(GoogleTestLauncher-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| ) |
| unset(RunCMake_TEST_OUTPUT_MERGE) |
| |
| run_cmake_command(GoogleTestLauncher-test |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -V |
| --no-label-summary |
| ) |
| endfunction() |
| |
| function(run_GoogleTestXML DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTestXML-build) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTestXML -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE}) |
| |
| run_cmake_command(GoogleTestXML-discovery |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target xml_output |
| ) |
| |
| run_cmake_command(GoogleTestXML-result |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R GoogleTestXML |
| --no-label-summary |
| ) |
| |
| run_cmake_command(GoogleTestXML-special-result |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R GoogleTestXMLSpecial |
| --no-label-summary |
| ) |
| endfunction() |
| |
| function(run_GoogleTest_discovery_timeout DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-discovery-timeout) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTestDiscoveryTimeout -DDISCOVERY_MODE=${DISCOVERY_MODE}) |
| |
| set(RunCMake_TEST_OUTPUT_MERGE 1) |
| run_cmake_command(GoogleTest-discovery-${DISCOVERY_MODE}-timeout-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target discovery_timeout_test |
| ) |
| set(RunCMake_TEST_OUTPUT_MERGE 0) |
| |
| run_cmake_command(GoogleTest-discovery-${DISCOVERY_MODE}-timeout-test |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -R discovery_timeout_test |
| --no-label-summary |
| ) |
| endfunction() |
| |
| function(run_GoogleTest_discovery_arg_change DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-discovery-arg-change) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTestDiscoveryArgChange |
| -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE} |
| -DTEST_FILTER=basic |
| ) |
| run_cmake_command(GoogleTest-discovery-arg-change-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Release |
| --target fake_gtest |
| ) |
| run_cmake_command(GoogleTest-discovery-arg-change-basic |
| ${CMAKE_CTEST_COMMAND} |
| -C Release |
| -N |
| ) |
| execute_process(COMMAND ${CMAKE_COMMAND} -E sleep ${fs_delay}) # handle 1s resolution |
| run_cmake_with_options(GoogleTestDiscoveryArgChange |
| -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE} |
| -DTEST_FILTER=typed |
| ) |
| run_cmake_command(GoogleTest-discovery-arg-change-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Release |
| --target fake_gtest |
| ) |
| run_cmake_command(GoogleTest-discovery-arg-change-typed |
| ${CMAKE_CTEST_COMMAND} |
| -C Release |
| -N |
| ) |
| endfunction() |
| |
| function(run_GoogleTest_discovery_multi_config) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-discovery-multi-config) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake(GoogleTestDiscoveryMultiConfig) |
| |
| run_cmake_command(GoogleTest-build-release |
| ${CMAKE_COMMAND} |
| --build . |
| --config Release |
| --target configuration_gtest |
| ) |
| run_cmake_command(GoogleTest-build-debug |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target configuration_gtest |
| ) |
| run_cmake_command(GoogleTest-configuration-release |
| ${CMAKE_CTEST_COMMAND} |
| -C Release |
| -L CONFIG |
| -N |
| ) |
| run_cmake_command(GoogleTest-configuration-debug |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| -L CONFIG |
| -N |
| ) |
| |
| endfunction() |
| |
| function(run_GoogleTest_discovery_test_list DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-discovery-test-list-build) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTestDiscoveryTestList -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE}) |
| |
| run_cmake_command(GoogleTest-discovery-test-list-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target test_list_test |
| ) |
| |
| run_cmake_command(GoogleTest-discovery-test-list-test |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| --no-label-summary |
| ) |
| endfunction() |
| |
| function(run_GoogleTest_discovery_flush_script DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-discovery-flush-script-build) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTestDiscoveryFlushScript -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE}) |
| |
| run_cmake_command(GoogleTest-discovery-flush-script-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target flush_script_test |
| ) |
| |
| run_cmake_command(GoogleTest-discovery-flush-script-test |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| --no-label-summary |
| ) |
| endfunction() |
| |
| function(run_GoogleTest_discovery_test_list_scoped DISCOVERY_MODE) |
| # Use a single build tree for a few tests without cleaning. |
| set(RunCMake_TEST_BINARY_DIR ${RunCMake_BINARY_DIR}/GoogleTest-discovery-test-list-scoped-build) |
| set(RunCMake_TEST_NO_CLEAN 1) |
| if(NOT RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| set(RunCMake_TEST_OPTIONS -DCMAKE_BUILD_TYPE=Debug) |
| endif() |
| file(REMOVE_RECURSE "${RunCMake_TEST_BINARY_DIR}") |
| file(MAKE_DIRECTORY "${RunCMake_TEST_BINARY_DIR}") |
| |
| run_cmake_with_options(GoogleTestDiscoveryTestListScoped -DCMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE=${DISCOVERY_MODE}) |
| |
| run_cmake_command(GoogleTest-discovery-test-list-scoped-build |
| ${CMAKE_COMMAND} |
| --build . |
| --config Debug |
| --target test_list_scoped_test |
| ) |
| |
| run_cmake_command(GoogleTest-discovery-test-list-scoped-test |
| ${CMAKE_CTEST_COMMAND} |
| -C Debug |
| --no-label-summary |
| ) |
| endfunction() |
| |
| foreach(DISCOVERY_MODE POST_BUILD PRE_TEST) |
| message("Testing ${DISCOVERY_MODE} discovery mode via CMAKE_GTEST_DISCOVER_TESTS_DISCOVERY_MODE global override...") |
| run_GoogleTest(${DISCOVERY_MODE}) |
| run_GoogleTestLauncher(${DISCOVERY_MODE}) |
| run_GoogleTestXML(${DISCOVERY_MODE}) |
| message("Testing ${DISCOVERY_MODE} discovery mode via DISCOVERY_MODE option...") |
| run_GoogleTest_discovery_timeout(${DISCOVERY_MODE}) |
| if(# VS 9 does not rebuild if POST_BUILD command changes. |
| NOT "${DISCOVERY_MODE};${RunCMake_GENERATOR}" MATCHES "^POST_BUILD;Visual Studio 9") |
| run_GoogleTest_discovery_arg_change(${DISCOVERY_MODE}) |
| endif() |
| run_GoogleTest_discovery_test_list(${DISCOVERY_MODE}) |
| run_GoogleTest_discovery_test_list_scoped(${DISCOVERY_MODE}) |
| run_GoogleTest_discovery_flush_script(${DISCOVERY_MODE}) |
| endforeach() |
| |
| if(RunCMake_GENERATOR_IS_MULTI_CONFIG) |
| message("Testing PRE_TEST discovery multi configuration...") |
| run_GoogleTest_discovery_multi_config() |
| endif() |
