Help/manual/cmake-qt.7.rst - third_party/cmake - Git at Google

 .. cmake-manual-description: CMake Qt Features Reference

 cmake-qt(7)
 ***********

 .. only:: html or latex

    .. contents::

 Introduction
 ============

 CMake can find and use Qt 4 and Qt 5 libraries.  The Qt 4 libraries are found
 by the :module:`FindQt4` find-module shipped with CMake, whereas the
 Qt 5 libraries are found using "Config-file Packages" shipped with Qt 5. See
 :manual:`cmake-packages(7)` for more information about CMake packages, and
 see `the Qt cmake manual <http://qt-project.org/doc/qt-5/cmake-manual.html>`_
 for your Qt version.

 Qt 4 and Qt 5 may be used together in the same
 :manual:`CMake buildsystem <cmake-buildsystem(7)>`:

 .. code-block:: cmake

   cmake_minimum_required(VERSION 3.0.0 FATAL_ERROR)

   project(Qt4And5)

   set(CMAKE_AUTOMOC ON)
   set(CMAKE_INCLUDE_CURRENT_DIR ON)

   find_package(Qt5Widgets REQUIRED)
   add_executable(publisher publisher.cpp)
   target_link_libraries(publisher Qt5::Widgets Qt5::DBus)

   find_package(Qt4 REQUIRED)
   add_executable(subscriber subscriber.cpp)
   target_link_libraries(subscriber Qt4::QtGui Qt4::QtDBus)

 A CMake target may not link to both Qt 4 and Qt 5.  A diagnostic is issued if
 this is attempted or results from transitive target dependency evaluation.

 Qt Build Tools
 ==============

 Qt relies on some bundled tools for code generation, such as ``moc`` for
 meta-object code generation, ``uic`` for widget layout and population,
 and ``rcc`` for virtual filesystem content generation.  These tools may be
 automatically invoked by :manual:`cmake(1)` if the appropriate conditions
 are met.  The automatic tool invocation may be used with both Qt 4 and Qt 5.

 The tools are executed as part of a synthesized custom target generated by
 CMake.  Target dependencies may be added to that custom target by adding them
 to the :prop_tgt:`AUTOGEN_TARGET_DEPENDS` target property.

 AUTOMOC
 '''''''

 The :prop_tgt:`AUTOMOC` target property controls whether :manual:`cmake(1)`
 inspects the C++ files in the target to determine if they require ``moc`` to
 be run, and to create rules to execute ``moc`` at the appropriate time.

 If a ``Q_OBJECT`` or ``Q_GADGET`` macro is found in a header file, ``moc``
 will be run on the file.  The result will be put into a file named according
 to ``moc_<basename>.cpp``.  If the macro is found in a C++ implementation
 file, the moc output will be put into a file named according to
 ``<basename>.moc``, following the Qt conventions.  The ``moc file`` may be
 included by the user in the C++ implementation file with a preprocessor
 ``#include``.  If it is not so included, it will be added to a separate file
 which is compiled into the target.

 The ``moc`` command line will consume the :prop_tgt:`COMPILE_DEFINITIONS` and
 :prop_tgt:`INCLUDE_DIRECTORIES` target properties from the target it is being
 invoked for, and for the appropriate build configuration.

 Generated ``moc_*.cpp`` and ``*.moc`` files are placed in the build directory
 so it is convenient to set the :variable:`CMAKE_INCLUDE_CURRENT_DIR`
 variable.  The :prop_tgt:`AUTOMOC` target property may be pre-set for all
 following targets by setting the :variable:`CMAKE_AUTOMOC` variable.  The
 :prop_tgt:`AUTOMOC_MOC_OPTIONS` target property may be populated to set
 options to pass to ``moc``. The :variable:`CMAKE_AUTOMOC_MOC_OPTIONS`
 variable may be populated to pre-set the options for all following targets.

 .. _`Qt AUTOUIC`:

 AUTOUIC
 '''''''

 The :prop_tgt:`AUTOUIC` target property controls whether :manual:`cmake(1)`
 inspects the C++ files in the target to determine if they require ``uic`` to
 be run, and to create rules to execute ``uic`` at the appropriate time.

 If a preprocessor ``#include`` directive is found which matches
 ``ui_<basename>.h``, and a ``<basename>.ui`` file exists, then ``uic`` will
 be executed to generate the appropriate file.

 Generated ``ui_*.h`` files are placed in the build directory so it is
 convenient to set the :variable:`CMAKE_INCLUDE_CURRENT_DIR` variable.  The
 :prop_tgt:`AUTOUIC` target property may be pre-set for all following targets
 by setting the :variable:`CMAKE_AUTOUIC` variable.  The
 :prop_tgt:`AUTOUIC_OPTIONS` target property may be populated to set options
 to pass to ``uic``.  The :variable:`CMAKE_AUTOUIC_OPTIONS` variable may be
 populated to pre-set the options for all following targets.  The
 :prop_sf:`AUTOUIC_OPTIONS` source file property may be set on the
 ``<basename>.ui`` file to set particular options for the file.  This
 overrides options from the :prop_tgt:`AUTOUIC_OPTIONS` target property.

 A target may populate the :prop_tgt:`INTERFACE_AUTOUIC_OPTIONS` target
 property with options that should be used when invoking ``uic``.  This must be
 consistent with the :prop_tgt:`AUTOUIC_OPTIONS` target property content of the
 depender target.  The :variable:`CMAKE_DEBUG_TARGET_PROPERTIES` variable may
 be used to track the origin target of such
 :prop_tgt:`INTERFACE_AUTOUIC_OPTIONS`.  This means that a library which
 provides an alternative translation system for Qt may specify options which
 should be used when running ``uic``:

 .. code-block:: cmake

   add_library(KI18n klocalizedstring.cpp)
   target_link_libraries(KI18n Qt5::Core)

   # KI18n uses the tr2i18n() function instead of tr().  That function is
   # declared in the klocalizedstring.h header.
   set(autouic_options
     -tr tr2i18n
     -include klocalizedstring.h
   )

   set_property(TARGET KI18n APPEND PROPERTY
     INTERFACE_AUTOUIC_OPTIONS ${autouic_options}
   )

 A consuming project linking to the target exported from upstream automatically
 uses appropriate options when ``uic`` is run by :prop_tgt:`AUTOUIC`, as a
 result of linking with the :prop_tgt:`IMPORTED` target:

 .. code-block:: cmake

   set(CMAKE_AUTOUIC ON)
   # Uses a libwidget.ui file:
   add_library(LibWidget libwidget.cpp)
   target_link_libraries(LibWidget
     KF5::KI18n
     Qt5::Widgets
   )

 .. _`Qt AUTORCC`:

 AUTORCC
 '''''''

 The :prop_tgt:`AUTORCC` target property controls whether :manual:`cmake(1)`
 creates rules to execute ``rcc`` at the appropriate time on source files
 which have the suffix ``.qrc``.

 .. code-block:: cmake

   add_executable(myexe main.cpp resource_file.qrc)

 The :prop_tgt:`AUTORCC` target property may be pre-set for all following targets
 by setting the :variable:`CMAKE_AUTORCC` variable.  The
 :prop_tgt:`AUTORCC_OPTIONS` target property may be populated to set options
 to pass to ``rcc``.  The :variable:`CMAKE_AUTORCC_OPTIONS` variable may be
 populated to pre-set the options for all following targets.  The
 :prop_sf:`AUTORCC_OPTIONS` source file property may be set on the
 ``<name>.qrc`` file to set particular options for the file.  This
 overrides options from the :prop_tgt:`AUTORCC_OPTIONS` target property.

 qtmain.lib on Windows
 =====================

 The Qt 4 and 5 :prop_tgt:`IMPORTED` targets for the QtGui libraries specify
 that the qtmain.lib static library shipped with Qt will be linked by all
 dependent executables which have the :prop_tgt:`WIN32_EXECUTABLE` enabled.

 To disable this behavior, enable the ``Qt5_NO_LINK_QTMAIN`` target property for
 Qt 5 based targets or ``QT4_NO_LINK_QTMAIN`` target property for Qt 4 based
 targets.

 .. code-block:: cmake

   add_executable(myexe WIN32 main.cpp)
   target_link_libraries(myexe Qt4::QtGui)

   add_executable(myexe_no_qtmain WIN32 main_no_qtmain.cpp)
   set_property(TARGET main_no_qtmain PROPERTY QT4_NO_LINK_QTMAIN ON)
   target_link_libraries(main_no_qtmain Qt4::QtGui)
	.. cmake-manual-description: CMake Qt Features Reference

	cmake-qt(7)
	***********

	.. only:: html or latex

	.. contents::

	Introduction
	============

	CMake can find and use Qt 4 and Qt 5 libraries. The Qt 4 libraries are found
	by the :module:`FindQt4` find-module shipped with CMake, whereas the
	Qt 5 libraries are found using "Config-file Packages" shipped with Qt 5. See
	:manual:`cmake-packages(7)` for more information about CMake packages, and
	see `the Qt cmake manual <http://qt-project.org/doc/qt-5/cmake-manual.html>`_
	for your Qt version.

	Qt 4 and Qt 5 may be used together in the same
	:manual:`CMake buildsystem <cmake-buildsystem(7)>`:

	.. code-block:: cmake

	cmake_minimum_required(VERSION 3.0.0 FATAL_ERROR)

	project(Qt4And5)

	set(CMAKE_AUTOMOC ON)
	set(CMAKE_INCLUDE_CURRENT_DIR ON)

	find_package(Qt5Widgets REQUIRED)
	add_executable(publisher publisher.cpp)
	target_link_libraries(publisher Qt5::Widgets Qt5::DBus)

	find_package(Qt4 REQUIRED)
	add_executable(subscriber subscriber.cpp)
	target_link_libraries(subscriber Qt4::QtGui Qt4::QtDBus)

	A CMake target may not link to both Qt 4 and Qt 5. A diagnostic is issued if
	this is attempted or results from transitive target dependency evaluation.

	Qt Build Tools
	==============

	Qt relies on some bundled tools for code generation, such as ``moc`` for
	meta-object code generation, ``uic`` for widget layout and population,
	and ``rcc`` for virtual filesystem content generation. These tools may be
	automatically invoked by :manual:`cmake(1)` if the appropriate conditions
	are met. The automatic tool invocation may be used with both Qt 4 and Qt 5.

	The tools are executed as part of a synthesized custom target generated by
	CMake. Target dependencies may be added to that custom target by adding them
	to the :prop_tgt:`AUTOGEN_TARGET_DEPENDS` target property.

	AUTOMOC
	'''''''

	The :prop_tgt:`AUTOMOC` target property controls whether :manual:`cmake(1)`
	inspects the C++ files in the target to determine if they require ``moc`` to
	be run, and to create rules to execute ``moc`` at the appropriate time.

	If a ``Q_OBJECT`` or ``Q_GADGET`` macro is found in a header file, ``moc``
	will be run on the file. The result will be put into a file named according
	to ``moc_<basename>.cpp``. If the macro is found in a C++ implementation
	file, the moc output will be put into a file named according to
	``<basename>.moc``, following the Qt conventions. The ``moc file`` may be
	included by the user in the C++ implementation file with a preprocessor
	``#include``. If it is not so included, it will be added to a separate file
	which is compiled into the target.

	The ``moc`` command line will consume the :prop_tgt:`COMPILE_DEFINITIONS` and
	:prop_tgt:`INCLUDE_DIRECTORIES` target properties from the target it is being
	invoked for, and for the appropriate build configuration.

	Generated ``moc_.cpp`` and ``.moc`` files are placed in the build directory
	so it is convenient to set the :variable:`CMAKE_INCLUDE_CURRENT_DIR`
	variable. The :prop_tgt:`AUTOMOC` target property may be pre-set for all
	following targets by setting the :variable:`CMAKE_AUTOMOC` variable. The
	:prop_tgt:`AUTOMOC_MOC_OPTIONS` target property may be populated to set
	options to pass to ``moc``. The :variable:`CMAKE_AUTOMOC_MOC_OPTIONS`
	variable may be populated to pre-set the options for all following targets.

	.. _`Qt AUTOUIC`:

	AUTOUIC
	'''''''

	The :prop_tgt:`AUTOUIC` target property controls whether :manual:`cmake(1)`
	inspects the C++ files in the target to determine if they require ``uic`` to
	be run, and to create rules to execute ``uic`` at the appropriate time.

	If a preprocessor ``#include`` directive is found which matches
	``ui_<basename>.h``, and a ``<basename>.ui`` file exists, then ``uic`` will
	be executed to generate the appropriate file.

	Generated ``ui_*.h`` files are placed in the build directory so it is
	convenient to set the :variable:`CMAKE_INCLUDE_CURRENT_DIR` variable. The
	:prop_tgt:`AUTOUIC` target property may be pre-set for all following targets
	by setting the :variable:`CMAKE_AUTOUIC` variable. The
	:prop_tgt:`AUTOUIC_OPTIONS` target property may be populated to set options
	to pass to ``uic``. The :variable:`CMAKE_AUTOUIC_OPTIONS` variable may be
	populated to pre-set the options for all following targets. The
	:prop_sf:`AUTOUIC_OPTIONS` source file property may be set on the
	``<basename>.ui`` file to set particular options for the file. This
	overrides options from the :prop_tgt:`AUTOUIC_OPTIONS` target property.

	A target may populate the :prop_tgt:`INTERFACE_AUTOUIC_OPTIONS` target
	property with options that should be used when invoking ``uic``. This must be
	consistent with the :prop_tgt:`AUTOUIC_OPTIONS` target property content of the
	depender target. The :variable:`CMAKE_DEBUG_TARGET_PROPERTIES` variable may
	be used to track the origin target of such
	:prop_tgt:`INTERFACE_AUTOUIC_OPTIONS`. This means that a library which
	provides an alternative translation system for Qt may specify options which
	should be used when running ``uic``:

	.. code-block:: cmake

	add_library(KI18n klocalizedstring.cpp)
	target_link_libraries(KI18n Qt5::Core)

	# KI18n uses the tr2i18n() function instead of tr(). That function is
	# declared in the klocalizedstring.h header.
	set(autouic_options
	-tr tr2i18n
	-include klocalizedstring.h
	)

	set_property(TARGET KI18n APPEND PROPERTY
	INTERFACE_AUTOUIC_OPTIONS ${autouic_options}
	)

	A consuming project linking to the target exported from upstream automatically
	uses appropriate options when ``uic`` is run by :prop_tgt:`AUTOUIC`, as a
	result of linking with the :prop_tgt:`IMPORTED` target:

	.. code-block:: cmake

	set(CMAKE_AUTOUIC ON)
	# Uses a libwidget.ui file:
	add_library(LibWidget libwidget.cpp)
	target_link_libraries(LibWidget
	KF5::KI18n
	Qt5::Widgets
	)

	.. _`Qt AUTORCC`:

	AUTORCC
	'''''''

	The :prop_tgt:`AUTORCC` target property controls whether :manual:`cmake(1)`
	creates rules to execute ``rcc`` at the appropriate time on source files
	which have the suffix ``.qrc``.

	.. code-block:: cmake

	add_executable(myexe main.cpp resource_file.qrc)

	The :prop_tgt:`AUTORCC` target property may be pre-set for all following targets
	by setting the :variable:`CMAKE_AUTORCC` variable. The
	:prop_tgt:`AUTORCC_OPTIONS` target property may be populated to set options
	to pass to ``rcc``. The :variable:`CMAKE_AUTORCC_OPTIONS` variable may be
	populated to pre-set the options for all following targets. The
	:prop_sf:`AUTORCC_OPTIONS` source file property may be set on the
	``<name>.qrc`` file to set particular options for the file. This
	overrides options from the :prop_tgt:`AUTORCC_OPTIONS` target property.

	qtmain.lib on Windows
	=====================

	The Qt 4 and 5 :prop_tgt:`IMPORTED` targets for the QtGui libraries specify
	that the qtmain.lib static library shipped with Qt will be linked by all
	dependent executables which have the :prop_tgt:`WIN32_EXECUTABLE` enabled.

	To disable this behavior, enable the ``Qt5_NO_LINK_QTMAIN`` target property for
	Qt 5 based targets or ``QT4_NO_LINK_QTMAIN`` target property for Qt 4 based
	targets.

	.. code-block:: cmake

	add_executable(myexe WIN32 main.cpp)
	target_link_libraries(myexe Qt4::QtGui)

	add_executable(myexe_no_qtmain WIN32 main_no_qtmain.cpp)
	set_property(TARGET main_no_qtmain PROPERTY QT4_NO_LINK_QTMAIN ON)
	target_link_libraries(main_no_qtmain Qt4::QtGui)