move EOL boards to overlays
This helps us slowly deprecate this repo.
BUG=chromium:937711
TEST=precq passes
CQ-DEPEND=CL:1535559
Change-Id: Id65a586b74e270286cffc8b009c784cfb3fe525d
Reviewed-on: https://chromium-review.googlesource.com/1535563
Commit-Ready: Mike Frysinger <vapier@chromium.org>
Tested-by: Mike Frysinger <vapier@chromium.org>
Reviewed-by: Tai-Hsu Lin <sheckylin@chromium.org>
diff --git a/50-touchpad-cmt-alex.conf b/50-touchpad-cmt-alex.conf
deleted file mode 100644
index 7e20c0c..0000000
--- a/50-touchpad-cmt-alex.conf
+++ /dev/null
@@ -1,32 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad alex"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "SynPS/2 Synaptics TouchPad"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- Option "Pressure Calibration Offset" "-42.2"
- Option "Pressure Calibration Slope" "1.61"
- Option "Tap Minimum Pressure" "15.0"
- Option "Input Queue Max Delay" "0.026"
- Option "Fling Stop Timeout" "0.04"
- # Bounds overrides:
- Option "Active Area Left" "1265"
- Option "Active Area Right" "5678"
- Option "Active Area Top" "1165"
- Option "Active Area Bottom" "4689"
- # Enable Stationary Classifier
- Option "Stationary Wiggle Filter Enabled" "1"
- # Disable IIR filter
- Option "IIR b0" "1"
- Option "IIR b1" "0"
- Option "IIR b2" "0"
- Option "IIR b3" "0"
- Option "IIR a1" "0"
- Option "IIR a2" "0"
- Option "IIR Distance Threshold" "1000"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
diff --git a/50-touchpad-cmt-butterfly.conf b/50-touchpad-cmt-butterfly.conf
deleted file mode 100644
index 4d0eea3..0000000
--- a/50-touchpad-cmt-butterfly.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad butterfly"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "cyapa"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- # Disable some causes of delay
- Option "IIR b0" "1"
- Option "IIR b1" "0"
- Option "IIR b2" "0"
- Option "IIR b3" "0"
- Option "IIR a1" "0"
- Option "IIR a2" "0"
- Option "IIR Distance Threshold" "1000"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
-
-Section "InputClass"
- Identifier "touchpad butterfly cyapa"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "cyapa"
- Option "Integrated Touchpad" "1"
- Option "Pressure Calibration Offset" "-7.20313156370106"
- Option "Pressure Calibration Slope" "3.95266938056467"
- # Extra filters for Cyapa
- Option "Box Width" "1.0"
- Option "Box Height" "1.0"
- Option "Sensor Jump Filter Enable" "1"
- Option "Sensor Jump Min Dist Move" "0.9"
- Option "Sensor Jump Similar Multiplier Move" "1.5"
- Option "Sensor Jump Min Dist Non-Move" "0.3"
- Option "Adjust IIR History On Warp" "1"
- Option "Max Allowed Pressure Change Per Sec" "8000"
- Option "Max Hysteresis Pressure Per Sec" "8000"
- Option "Delay On Possible Liftoff" "1"
- Option "Input Queue Max Delay" "0.019"
- Option "Split Corrector Enabled" "1"
- Option "Palm Pressure" "250"
- Option "Pinch Enable" "0"
-EndSection
-
diff --git a/50-touchpad-cmt-link.conf b/50-touchpad-cmt-link.conf
deleted file mode 100644
index 1d1771d..0000000
--- a/50-touchpad-cmt-link.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad link"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "Atmel|cyapa"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- # Disable some causes of delay
- Option "IIR b0" "1"
- Option "IIR b1" "0"
- Option "IIR b2" "0"
- Option "IIR b3" "0"
- Option "IIR a1" "0"
- Option "IIR a2" "0"
- Option "IIR Distance Threshold" "1000"
- # The flexible case can cause accidental physical clicks
- Option "Zero Finger Click Enable" "0"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
-EndSection
-
-Section "InputClass"
- Identifier "touchpad link cyapa"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "cyapa"
- Option "Pressure Calibration Offset" "-5.2469650828279"
- Option "Pressure Calibration Slope" "1.7398671681412"
- # Extra filters for Cyapa
- Option "Box Width" "1.0"
- Option "Box Height" "1.0"
- Option "Sensor Jump Filter Enable" "1"
-EndSection
-
-Section "InputClass"
- Identifier "touchpad link atmel"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "Atmel"
- Option "Pressure Calibration Offset" "-15.369282490859"
- Option "Pressure Calibration Slope" "1.3219851012421"
- # TODO(clchiou): Calibrate bias on X-axis
- Option "Touchpad Device Output Bias on X-Axis" "26.68917773528923"
- Option "Touchpad Device Output Bias on Y-Axis" "26.68917773528923"
- # We see lots of pressure changes under normal use, so raise thresholds
- Option "Max Allowed Pressure Change Per Sec" "100000.0"
- Option "Max Hysteresis Pressure Per Sec" "100000.0"
- # People complain that light tap clicks don't register
- Option "Tap Minimum Pressure" "21.0"
- Option "Box Width" "0.3"
- Option "Box Height" "0.3"
- # Fix for finger merge issue
- Option "Finger Merge Filter Enabled" "1"
- # Fix for finger split issue
- Option "Split Corrector Enabled" "1"
- Option "Split Merge Max Separation" "14"
-EndSection
-
-# Not CMT related. This is to enable TouchNoiseFilter on Pixel touchscreen.
-Section "InputClass"
- Identifier "Atmel touchscreen"
- MatchIsTouchscreen "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "Atmel"
- Option "EnableTouchNoiseFilter" "1"
-EndSection
diff --git a/50-touchpad-cmt-lumpy.conf b/50-touchpad-cmt-lumpy.conf
deleted file mode 100644
index 0339d6f..0000000
--- a/50-touchpad-cmt-lumpy.conf
+++ /dev/null
@@ -1,58 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad lumpy"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "Atmel|cyapa"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- # Disable some causes of delay
- Option "IIR b0" "1"
- Option "IIR b1" "0"
- Option "IIR b2" "0"
- Option "IIR b3" "0"
- Option "IIR a1" "0"
- Option "IIR a2" "0"
- Option "IIR Distance Threshold" "1000"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
-
-Section "InputClass"
- Identifier "touchpad lumpy cyapa"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "cyapa"
- Option "Pressure Calibration Offset" "-4.0418716653545"
- Option "Pressure Calibration Slope" "1.9403694168841"
- # Extra filters for Cyapa
- Option "Box Width" "1.0"
- Option "Box Height" "1.0"
-
- Option "Sensor Jump Filter Enable" "1"
- Option "Sensor Jump Min Dist Non-Move" "1.0"
- Option "Sensor Jump Min Dist Move" "1.0"
- Option "Sensor Jump No Warp Min Dist Move" "0.95"
-
- Option "Non-linearity correction data file" "/usr/share/gestures/lumpy_linearity.dat"
- Option "Enable non-linearity correction" "1"
-
- Option "Split Corrector Enabled" "1"
- Option "Pinch Enable" "0"
-EndSection
-
-Section "InputClass"
- Identifier "touchpad lumpy atmel"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "Atmel"
- Option "Pressure Calibration Offset" "-15.369282490859"
- Option "Pressure Calibration Slope" "1.3219851012421"
- # TODO(clchiou): Calibrate bias on X-axis
- Option "Touchpad Device Output Bias on X-Axis" "26.68917773528923"
- Option "Touchpad Device Output Bias on Y-Axis" "26.68917773528923"
- # We see lots of pressure changes under normal use, so raise thresholds
- Option "Max Allowed Pressure Change Per Sec" "100000.0"
- Option "Max Hysteresis Pressure Per Sec" "100000.0"
-EndSection
diff --git a/50-touchpad-cmt-mario.conf b/50-touchpad-cmt-mario.conf
deleted file mode 100644
index 5058724..0000000
--- a/50-touchpad-cmt-mario.conf
+++ /dev/null
@@ -1,31 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad mario"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "SynPS/2 Synaptics TouchPad"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- Option "Pressure Calibration Offset" "-23.2"
- Option "Pressure Calibration Slope" "1.21"
- Option "Input Queue Delay" "0.017"
- # Bounds overrides:
- Option "Active Area Left" "1217"
- Option "Active Area Right" "5733"
- Option "Active Area Top" "1061"
- Option "Active Area Bottom" "4798"
- # Palm overrides:
- Option "Palm Pressure" "235.0"
- # SemiMT overrides:
- Option "SemiMT Correcting Filter Enable" "1"
- # Tapping Finger Min Separation Distance overrides:
- Option "Tap Min Separation" "0.0"
- # Max Pressure Change overrides:
- Option "Max Allowed Pressure Change Per Sec" "2200.0"
- Option "Max Hysteresis Pressure Per Sec" "1200.0"
- # Double Fling Buffer Depth due to 2x Interpolation
- Option "Fling Buffer Depth" "20"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
diff --git a/50-touchpad-cmt-parrot.conf b/50-touchpad-cmt-parrot.conf
deleted file mode 100644
index 8ace0c3..0000000
--- a/50-touchpad-cmt-parrot.conf
+++ /dev/null
@@ -1,41 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad parrot"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "cyapa"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- # Disable some causes of delay
- Option "IIR b0" "1"
- Option "IIR b1" "0"
- Option "IIR b2" "0"
- Option "IIR b3" "0"
- Option "IIR a1" "0"
- Option "IIR a2" "0"
- Option "IIR Distance Threshold" "1000"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
-
-Section "InputClass"
- Identifier "touchpad parrot cyapa"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "cyapa"
- Option "Pressure Calibration Offset" "-13.034105833098"
- Option "Pressure Calibration Slope" "1.847199617737"
- # Extra filters for Cyapa
- Option "Box Width" "1.0"
- Option "Box Height" "1.0"
- Option "Sensor Jump Filter Enable" "1"
- Option "Merge Max Ratio" "0.63"
- Option "Split Merge Max Movement" "7.1"
- Option "Max Allowed Pressure Change Per Sec" "4000"
- Option "Max Hysteresis Pressure Per Sec" "4000"
- Option "Delay On Possible Liftoff" "1"
- Option "Input Queue Max Delay" "0.019"
- Option "Split Corrector Enabled" "1"
- Option "Pinch Enable" "0"
-EndSection
-
diff --git a/50-touchpad-cmt-stout.conf b/50-touchpad-cmt-stout.conf
deleted file mode 100644
index 143cd38..0000000
--- a/50-touchpad-cmt-stout.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad stout"
- MatchIsTouchpad "on"
- MatchProduct "SynPS/2 Synaptics TouchPad"
- MatchDevicePath "/dev/input/event*"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- Option "Pressure Calibration Offset" "-46.5105265656204"
- Option "Pressure Calibration Slope" "1.5272358063547"
- # Bounds overrides:
- Option "Active Area Left" "1176"
- Option "Active Area Right" "5767"
- Option "Active Area Top" "413"
- Option "Active Area Bottom" "5534"
- # Resolution overrides:
- Option "Vertical Resolution" "142"
- Option "Horizontal Resolution" "62"
- # Reduce palm detection edge zone
- Option "Tap Exclusion Border Width" "1"
- Option "Palm Edge Zone Width" "2"
- # Disable some causes of delay
- Option "IIR b0" "1"
- Option "IIR b1" "0"
- Option "IIR b2" "0"
- Option "IIR b3" "0"
- Option "IIR a1" "0"
- Option "IIR a2" "0"
- Option "IIR Distance Threshold" "1000"
- # Pressure change overrides
- Option "Max Pressure Change Duration" "0.02"
- Option "Max Allowed Pressure Change Per Sec" "1200"
- Option "Max Hysteresis Pressure Per Sec" "1000"
- # Reduce min. tap pressure
- Option "Tap Minimum Pressure" "10"
- # Reduce max. wiggle distance
- Option "Wiggle Max Distance" "4.0"
- # Box dimension overrides
- Option "Box Width" "0.2"
- Option "Box Height" "0.2"
- # Enable Stationary Classifier
- Option "Stationary Wiggle Filter Enabled" "1"
- # Enable Liftoff Jump Filter
- Option "Delay On Possible Liftoff" "1"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
diff --git a/50-touchpad-cmt-zgb.conf b/50-touchpad-cmt-zgb.conf
deleted file mode 100644
index 87e5c27..0000000
--- a/50-touchpad-cmt-zgb.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-# Configure touchpads to use Chromium Multitouch (cmt) X input driver
-Section "InputClass"
- Identifier "touchpad zgb"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- MatchProduct "SynPS/2 Synaptics TouchPad"
- Option "Touchpad Stack Version" "1"
- Option "Integrated Touchpad" "1"
- Option "Pressure Calibration Offset" "-54.6"
- Option "Pressure Calibration Slope" "2.01"
- Option "Tap Minimum Pressure" "15.0"
- Option "Input Queue Delay" "0.017"
- Option "Input Queue Max Delay" "0.026"
- Option "Fling Stop Timeout" "0.04"
- # Bounds overrides:
- Option "Active Area Left" "1265"
- Option "Active Area Right" "5678"
- Option "Active Area Top" "1103"
- Option "Active Area Bottom" "4754"
- Option "Two Finger Vertical Close Distance Thresh" "35.0"
- Option "Fling Buffer Suppress Zero Length Scrolls" "0"
- Option "Pinch Enable" "0"
-EndSection
diff --git a/files/lumpy_linearity.dat b/files/lumpy_linearity.dat
deleted file mode 100644
index 119f9fe..0000000
--- a/files/lumpy_linearity.dat
+++ /dev/null
Binary files differ