| # Configure touchpads to use Chromium Multitouch (cmt) X input driver |
| Section "InputClass" |
| Identifier "touchpad lumpy" |
| MatchIsTouchpad "on" |
| MatchDevicePath "/dev/input/event*" |
| MatchProduct "Atmel|cyapa" |
| Option "Integrated Touchpad" "1" |
| # Disable some causes of delay |
| Option "IIR b0" "1" |
| Option "IIR b1" "0" |
| Option "IIR b2" "0" |
| Option "IIR b3" "0" |
| Option "IIR a1" "0" |
| Option "IIR a2" "0" |
| Option "IIR Distance Threshold" "1000" |
| Option "Input Queue Delay" "0" |
| EndSection |
| |
| Section "InputClass" |
| Identifier "touchpad lumpy cyapa" |
| MatchIsTouchpad "on" |
| MatchDevicePath "/dev/input/event*" |
| MatchProduct "cyapa" |
| Option "Pressure Calibration Offset" "-4.0418716653545" |
| Option "Pressure Calibration Slope" "1.9403694168841" |
| # Extra filters for Cyapa |
| Option "Box Width" "1.0" |
| Option "Box Height" "1.0" |
| |
| Option "Sensor Jump Filter Enable" "1" |
| Option "Sensor Jump Min Dist Non-Move" "1.0" |
| Option "Sensor Jump Min Dist Move" "1.0" |
| Option "Sensor Jump No Warp Min Dist Move" "0.95" |
| |
| Option "Non-linearity correction data file" "/usr/share/gestures/lumpy_linearity.dat" |
| Option "Enable non-linearity correction" "1" |
| |
| Option "Split Corrector Enabled" "1" |
| EndSection |
| |
| Section "InputClass" |
| Identifier "touchpad lumpy atmel" |
| MatchIsTouchpad "on" |
| MatchDevicePath "/dev/input/event*" |
| MatchProduct "Atmel" |
| Option "Pressure Calibration Offset" "-15.369282490859" |
| Option "Pressure Calibration Slope" "1.3219851012421" |
| # TODO(clchiou): Calibrate bias on X-axis |
| Option "Touchpad Device Output Bias on X-Axis" "26.68917773528923" |
| Option "Touchpad Device Output Bias on Y-Axis" "26.68917773528923" |
| # We see lots of pressure changes under normal use, so raise thresholds |
| Option "Max Allowed Pressure Change Per Sec" "100000.0" |
| Option "Max Hysteresis Pressure Per Sec" "100000.0" |
| EndSection |
