| 2016-02-26 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg' |
| per bit 8. Check bit 20 instead of bit 4 for VMOV |
| instruction. Record D registers for instructions changing |
| S registers. Change of the order of length and address |
| in record_buf_mem array. |
| |
| 2016-02-26 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register |
| number of Rd. |
| |
| 2016-02-25 Doug Evans <dje@google.com> |
| |
| * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid |
| compiler warning. |
| (recv_long_data): Ditto. |
| |
| 2016-02-25 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): |
| Initialize variables. |
| |
| 2016-02-25 Antoine Tremblay <antoine.tremblay@ericsson.com> |
| |
| * ax-general.c (ax_reg): Call gdbarch_remote_register_number. |
| (ax_reg_mask): Likewise. |
| |
| 2016-02-24 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (save_sigtrap) Delete. |
| (stop_wait_callback): Call save_stop_reason instead of |
| save_sigtrap. |
| (check_stopped_by_breakpoint): Rename to ... |
| (save_stop_reason): ... this. Bits of save_sigtrap folded here. |
| Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous |
| GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out |
| common code between the USE_SIGTRAP_SIGINFO and |
| !USE_SIGTRAP_SIGINFO blocks. |
| (linux_nat_filter_event): Call save_stop_reason instead of |
| save_sigtrap. |
| * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT |
| si_code for MIPS. |
| * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add |
| comments on MIPS behavior. |
| (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs. |
| |
| 2016-02-24 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0 |
| to avoid spurious warnings. |
| |
| 2016-02-24 Gary Benson <gbenson@redhat.com> |
| |
| * exec.c (exec_file_locate_attach): Do not attempt to |
| locate main executable locally if not found in sysroot. |
| |
| 2016-02-24 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.11 released. |
| |
| 2016-02-24 Wei-cheng Wang <cole945@gmail.com> |
| |
| * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle |
| unavailable PC/SP to build unavailable frame. |
| |
| 2016-02-23 Doug Evans <dje@google.com> |
| |
| Extend "skip" command to support -file, -gfile, -function, -rfunction. |
| * NEWS: Document new features. |
| * skip.c: #include "fnmatch.h", "gdb_regex.h". |
| (skiplist_entry) <file>: Renamed from filename. |
| <function>: Renamed from function_name. |
| <file_is_glob, function_is_regexp>: New members. |
| <compiled_function_regexp, compiled_function_regexp_is_valid>: |
| New members. |
| (make_skip_entry): New function. |
| (free_skiplist_entry, free_skiplist_entry_cleanup): New functions. |
| (make_free_skiplist_entry_cleanup): New function. |
| (skip_file_command): Update. |
| (skip_function, skip_function_command): Update. |
| (compile_skip_regexp): New functions. |
| (skip_command): Add support for new options. |
| (skip_info): Update. |
| (skip_file_p, skip_gfile_p): New functions. |
| (skip_function_p, skip_rfunction_p): New functions. |
| (function_name_is_marked_for_skip): Update and simplify. |
| (_initialize_step_skip): Update. |
| * symtab.c: #include "fnmatch.h". |
| (compare_glob_filenames_for_search): New function. |
| * symtab.h (compare_glob_filenames_for_search): Declare. |
| * utils.c (count_path_elements): New function. |
| (strip_leading_path_elements): New function. |
| * utils.h (count_path_elements): Declare. |
| (strip_leading_path_elements): Declare. |
| |
| 2016-02-23 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter. |
| (thumb_process_displaced_insn): Likewise. |
| (arm_process_displaced_insn): Adjust calls. |
| |
| 2016-02-23 Yao Qi <yao.qi@linaro.org> |
| |
| * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>: |
| Remove. |
| <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove. |
| <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove. |
| <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New. |
| <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New. |
| <aarch64_sys_linkat, aarch64_sys_renameat>: New. |
| <aarch64_sys_faccessat>: New. |
| <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove. |
| <aarch64_sys_openat, aarch64_sys_readlinkat>: New. |
| <aarch64_sys_newfstatat>: New. |
| (UNSUPPORTED_SYSCALL_MAP): New macro. |
| (aarch64_canonicalize_syscall): Add missing syscalls. |
| |
| 2016-02-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print. |
| |
| 2016-02-22 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-tdep.c: Fix code format issues. |
| |
| 2016-02-21 Iain Buclaw <ibuclaw@gdcproject.org> |
| |
| * d-namespace.c (d_lookup_symbol_imports): Remove argument |
| 'search_parents'. All callers updated. |
| |
| 2016-02-18 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function. |
| (s390_gdbarch_init): Fill guess_tracepoint_registers hook. |
| |
| 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com> |
| |
| * NEWS: Add entry for bound violation. |
| * amd64-linux-tdep.c (amd64_linux_init_abi_common): |
| Add handler for segmentation fault. |
| * gdbarch.sh (handle_segmentation_fault): New. |
| * gdbarch.c: Regenerate. |
| * gdbarch.h: Regenerate. |
| * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New. |
| (SIG_CODE_BONDARY_FAULT): New define. |
| (i386_linux_init_abi): Use i386_mpx_bound_violation_handler. |
| * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New. |
| * i386-tdep.c (i386_mpx_enabled): Add as external. |
| * i386-tdep.c (i386_mpx_enabled): Add as external. |
| * infrun.c (handle_segmentation_fault): New function. |
| (print_signal_received_reason): Use handle_segmentation_fault. |
| |
| 2016-02-18 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * arch-utils.c (default_guess_tracepoint_registers): New function. |
| * arch-utils.h (default_guess_tracepoint_registers): New prototype. |
| * gdbarch.c: Regenerate. |
| * gdbarch.h: Regenerate. |
| * gdbarch.sh: Add guess_tracepoint_registers hook. |
| * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook. |
| |
| 2016-02-17 Gary Benson <gbenson@redhat.com> |
| |
| * exec.c (exec_file_locate_attach): Add missing cleanup. |
| |
| 2016-02-16 Don Breazeal <donb@codesourcery.com> |
| |
| PR remote/19496 |
| * remote.c (remove_new_fork_children): Check for pending |
| fork status in thread_info.suspend. |
| |
| 2016-02-16 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-linux-tdep.c (arm_linux_software_single_step): Assign |
| 'old_chain' later. |
| |
| 2016-02-16 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops) |
| <syscall_next_pc>: Remove argument PC. Callers updated. |
| * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc): |
| Remove argument PC. Get pc from regcache_read_pc. |
| * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove |
| argument PC. |
| |
| 2016-02-15 Yao Qi <yao.qi@linaro.org> |
| |
| * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x". |
| |
| 2016-02-12 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate |
| nextpc according to instruction. |
| |
| 2016-02-12 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call |
| self->ops->fixup if it isn't NULL. |
| * arch/arm-get-next-pcs.h: Include gdb_vecs.h. |
| (struct arm_get_next_pcs_ops) <fixup>: New field. |
| * arch/arm-linux.c: Include common-regcache.h and |
| arch/arm-get-next-pcs.h. |
| (arm_linux_get_next_pcs_fixup): New function. |
| * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare. |
| * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize |
| it with arm_linux_get_next_pcs_fixup. |
| (arm_linux_software_single_step): Move code to |
| arm_linux_get_next_pcs_fixup. |
| * arm-tdep.c (arm_get_next_pcs_ops): Initialize it. |
| |
| 2016-02-12 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn |
| and return NULL. |
| |
| 2016-02-12 Markus Metzger <markus.t.metzger@intel.com> |
| |
| * frame.h (skip_tailcall_frames): Update comment. |
| * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL |
| if only artificial frames are found. Update comment. |
| (frame_unwind_caller_id): Handle NULL return. |
| (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that |
| skip_artificial_frames does not return NULL. |
| (frame_pop): Add an error if only tailcall frames are found. |
| * infcmd.c (finish_command): Move skip_tailcall_frames call into |
| forward-execution case. Add an error if only tailcall frames are |
| found. |
| |
| 2016-02-12 Markus Metzger <markus.t.metzger@intel.com> |
| |
| * stack.c (frame_info): Check frame_unwind_caller_id. |
| |
| 2016-02-12 Markus Metzger <markus.t.metzger@intel.com> |
| |
| * frame.h (skip_tailcall_frames): New. |
| * frame.c (skip_tailcall_frames): New. |
| (frame_pop): Call skip_tailcall_frames. |
| * infcmd.c (finish_command): Call skip_tailcall_frames. |
| |
| 2016-02-11 Pedro Alves <palves@redhat.com> |
| |
| * Makefile.in (check-parallel): New rule. |
| |
| 2016-02-11 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * arm-tdep.c (arm_skip_prologue): Remove unused variables. |
| (arm_analyze_prologue): Likewise. |
| (arm_scan_prologue): Likewise. |
| (arm_m_exception_prev_register): Likewise. |
| (arm_copy_block_xfer): Likewise. |
| (thumb2_copy_block_xfer): Likewise. |
| (arm_decode_miscellaneous): Likewise. |
| (arm_decode_ld_st_word_ubyte): Likewise. |
| (arm_decode_svc_copro): Likewise. |
| (thumb2_decode_svc_copro): Likewise. |
| (thumb_copy_16bit_ldr_literal): Likewise. |
| (thumb_copy_pop_pc_16bit): Likewise. |
| (decode_thumb_32bit_ld_mem_hints): Likewise. |
| (arm_show_force_mode): Likewise. |
| (_initialize_arm_tdep): Likewise. |
| (arm_record_strx): Likewise. |
| (arm_record_extension_space): Likewise. |
| (arm_record_data_proc_misc_ld_str): Likewise. |
| (arm_record_exreg_ld_st_insn): Likewise. |
| (arm_record_vfp_data_proc_insn): Likewise. |
| (arm_record_coproc_data_proc): Likewise. |
| (thumb_record_misc): Likewise. |
| (thumb_record_ldm_stm_swi): Likewise. |
| (thumb2_record_ld_st_dual_ex_tbb): Likewise. |
| (thumb2_record_ld_mem_hints): Likewise. |
| (thumb2_record_lmul_lmla_div): Likewise. |
| (thumb2_record_asimd_struct_ld_st): Likewise. |
| (arm_process_record): Likewise. |
| |
| 2016-02-11 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * arm-tdep.c (arm_displaced_step_copy_insn): Remove. |
| (ARM displaced stepping support): Remove reference to |
| arm_displaced_step_copy_insn in comment. |
| * arm-tdep.h (arm_displaced_step_copy_insn): Remove. |
| * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove |
| reference to arm_displaced_step_copy_insn in comment. |
| |
| 2016-02-11 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn. |
| (thumb_copy_b): Likewise. |
| (arm_decode_b_bl_ldmstm): Likewise. |
| (thumb_copy_16bit_ldr_literal): Likewise. |
| (thumb_copy_pop_pc_16bit): Likewise. |
| |
| 2016-02-11 Antoine Tremblay <antoine.tremblay@ericsson.com> |
| |
| * tracepoint.c (encode_actions_1): Use target_gdbarch () rather |
| than loc->gdbarch. |
| |
| 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * tracefile-tfile.c (trace_tdesc): New static variable. |
| (tfile_open): Clear trace_tdesc, call target_find_description. |
| (tfile_interp_line): Recognize tdesc lines. |
| (tfile_close): Clear trace_tdesc. |
| (tfile_xfer_partial_features): New function. |
| (tfile_xfer_partial): Call tfile_xfer_partial_features. |
| (tfile_append_tdesc_line): New function. |
| |
| 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * ctf.c (ctf_write_tdesc): New function. |
| (ctf_write_ops): Wire in ctf_write_tdesc. |
| * tracefile-tfile.c (tfile_write_tdesc): New function. |
| (tfile_write_ops): Wire in tfile_write_tdesc. |
| * tracefile.c (trace_save): Call write_tdesc method. |
| * tracefile.h (struct trace_file_write_ops): Add write_tdesc method. |
| * xml-tdesc.c (target_fetch_description_xml): New function. |
| * xml-tdesc.h: Add target_fetch_description_xml prototype. |
| |
| 2016-02-10 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo. |
| (arm_decode_dp_misc): Likewise. |
| |
| 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function. |
| (amd64_init_abi): Fill ax_pseudo_register_collect hook. |
| * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove |
| misleading comment. |
| (i386_pseudo_register_write): Ditto. |
| (i386_ax_pseudo_register_collect): New function. |
| (i386_gdbarch_init): Fill ax_pseudo_register_collect hook. |
| * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype. |
| |
| 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * tracefile-tfile.c (tfile_fetch_registers): Use g packet order |
| instead of gdb order. |
| |
| 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds |
| check. |
| |
| 2016-02-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Create a new section for the next release branch. |
| Rename the section of the current branch, now that it has |
| been cut. |
| |
| 2016-02-10 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a): |
| * version.in: Bump version to 7.11.50.DATE-git. |
| |
| 2016-02-09 Keith Seitz <keiths@redhat.com> |
| |
| PR breakpoints/19546 |
| * breakpoint.c (breakpoint_event_location_empty_p): New function. |
| (update_breakpoints_after_exec, bkpt_re_set): Use this new function |
| instead of event_location_empty_p. |
| |
| 2016-02-09 Keith Seitz <keiths@redhat.com> |
| |
| * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use |
| string_to_event_location_basic instead of string_to_event_location. |
| |
| 2016-02-09 Keith Seitz <keiths@redhat.com> |
| |
| * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip |
| leading whitespace and use string_to_event_location_basic instead |
| of new_linespec_location. |
| |
| 2016-02-09 Keith Seitz <keiths@redhat.com> |
| |
| PR python/19506 |
| * python/py-breakpoint.c (bppy_init): Use |
| string_to_event_location_basic instead of new_linespec_location. |
| |
| 2016-02-09 Keith Seitz <keiths@redhat.com> |
| |
| * location.c (string_to_explicit_location): Note that "-p" is |
| reserved for probe locations and return NULL for any input |
| that starts with that. |
| (string_to_event_location): Move "legacy" linespec code to ... |
| (string_to_event_location_basic): ... here. |
| * location.h (string_to_event_location): Update comment. |
| (string_to_event_location_basic): New function. |
| |
| 2016-02-09 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * configure.ac: Use AC_CONFIG_FILES instead of passing arguments |
| to AC_OUTPUT. Remove "exit 0" at the end. |
| * configure: Regenerate. |
| |
| 2016-02-09 Pedro Alves <palves@redhat.com> |
| |
| PR breakpoints/19548 |
| * breakpoint.c (create_overlay_event_breakpoint): Don't update |
| global location list here. |
| (create_longjmp_master_breakpoint) |
| (create_std_terminate_master_breakpoint) |
| (create_exception_master_breakpoint, create_jit_event_breakpoint) |
| (update_breakpoint_locations): |
| (breakpoint_re_set): Update global location list after all |
| breakpoints are re-set. |
| |
| 2016-02-08 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * remote.c (remote_register_number_and_offset): Remove unused |
| variable(s). |
| (remote_thread_always_alive): Likewise. |
| (remote_update_thread_list): Likewise. |
| (process_initial_stop_replies): Likewise. |
| (remote_start_remote): Likewise. |
| (remote_check_symbols): Likewise. |
| (discard_pending_stop_replies): Likewise. |
| (process_stop_reply): Likewise. |
| (putpkt_binary): Likewise. |
| (getpkt): Likewise. |
| (remote_add_target_side_condition): Likewise. |
| (remote_insert_breakpoint): Likewise. |
| (remote_supports_stopped_by_sw_breakpoint): Likewise. |
| (remote_supports_stopped_by_hw_breakpoint): Likewise. |
| (remote_xfer_partial): Likewise. |
| (remote_read_btrace): Likewise. |
| (remote_async_serial_handler): Likewise. |
| (remote_thread_events): Likewise. |
| (_initialize_remote): Likewise. |
| |
| 2016-02-07 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * varobj.h (varobj_delete): Remove dellist parameter, update and |
| move documentation here. |
| * varobj.c (struct cpstack, cppush, cppop): Remove. |
| (delete_variable): Remove resultp (first) parameter. |
| (delete_variable_1): Likewise. |
| (varobj_delete): Remove dellist parameter and unused code. |
| (update_dynamic_varobj_children): Adjust varobj_delete call. |
| (update_type_if_necessary): Likewise. |
| (varobj_set_visualizer): Likewise. |
| (varobj_update): Likewise. |
| (value_of_root): Likewise. |
| (varobj_invalidate_iter): Likewise. |
| * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise. |
| |
| 2016-02-04 Yao Qi <yao.qi@linaro.org> |
| |
| * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to |
| 0 before handling 'F' and set it back afterwards. |
| |
| 2016-02-02 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * ui-out.c (MAX_UI_OUT_LEVELS): Remove. |
| |
| 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> |
| |
| * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval): |
| New types. |
| (compat_siginfo): New bound fields added. |
| (compat_x32_siginfo): New field added. |
| (cpt_si_addr_lsb): New define. |
| (compat_siginfo_from_siginfo): Use nat_siginfo. |
| (siginfo_from_compat_siginfo): Use nat_siginfo. |
| (compat_x32_siginfo_from_siginfo): Likewise. |
| (siginfo_from_compat_x32_siginfo): Likewise. |
| |
| 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> |
| |
| * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd |
| structure to the siginfo if extra_fields contains |
| LINUX_SIGINFO_FIELD_ADDR_BND. |
| |
| 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> |
| |
| * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern. |
| * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern. |
| * i386-linux-tdep.h (x86_linux_get_siginfo_type): New |
| function. |
| * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add |
| x86_linux_get_siginfo_type for the amd64 abi. |
| * i386-linux-tdep.c (x86_linux_get_siginfo_type): New |
| function. |
| (i386_linux_init_abi): Add new function at the i386 ABI |
| initialization. |
| |
| 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> |
| |
| * linux-tdep.h (linux_siginfo_extra_field_values): New enum values. |
| (linux_siginfo_extra_fields): New enum type. |
| * linux-tdep.c (linux_get_siginfo_type_with_fields): New function. |
| (linux_get_siginfo_type): Use new function. |
| |
| 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com> |
| |
| * nat/amd64-linux-siginfo.c: New file. |
| * nat/amd64-linux-siginfo.h: New file. |
| * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h. |
| (amd64-linux-siginfo.o): New rule. |
| * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o. |
| * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include. |
| (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo) |
| (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo) |
| (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid) |
| (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status) |
| (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band) |
| (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c. |
| |
| 2016-02-01 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * value.c (max_value_size): New variable. |
| (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define. |
| (set_max_value_size): New function. |
| (show_max_value_size): New function. |
| (check_type_length_before_alloc): New function. |
| (allocate_value_contents): Call check_type_length_before_alloc. |
| (set_value_enclosing_type): Likewise. |
| (_initialize_values): Add set/show handler for max-value-size. |
| * NEWS: Mention new set/show command. |
| |
| 2016-01-31 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * varobj.h (struct varobj): Fix typos in comments. |
| (struct lang_varobj_ops): Likewise. |
| * varobj.c (VAROBJ_TABLE_SIZE): Likewise. |
| (varobj_create): Move misplaced comment. |
| |
| 2016-01-29 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces |
| to for include additional lines. |
| * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces. |
| |
| 2016-01-28 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * gnulib/import/Makefile.am: Regenerate. |
| * gnulib/import/Makefile.in: Regenerate. |
| * gnulib/import/m4/gnulib-cache.m4: Regenerate. |
| * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr. |
| |
| 2016-01-28 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * remote.c (skip_to_semicolon): Remove. |
| (remote_parse_stop_reply): Use strchrnul instead of |
| skip_to_semicolon. |
| * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add |
| strchrnul. |
| * gnulib/aclocal.m4: Regenerate. |
| * gnulib/config.in: Regenerate. |
| * gnulib/configure: Regenerate. |
| * gnulib/import/Makefile.am: Regenerate. |
| * gnulib/import/Makefile.in: Regenerate. |
| * gnulib/import/m4/gnulib-cache.m4: Regenerate. |
| * gnulib/import/m4/gnulib-comp.m4: Regenerate. |
| * gnulib/import/m4/rawmemchr.m4: New file. |
| * gnulib/import/m4/strchrnul.m4: New file. |
| * gnulib/import/rawmemchr.c: New file. |
| * gnulib/import/rawmemchr.valgrind: New file. |
| * gnulib/import/strchrnul.c: New file. |
| * gnulib/import/strchrnul.valgrind: New file. |
| |
| 2016-01-28 Yao Qi <yao.qi@linaro.org> |
| |
| * breakpoint.c (build_target_command_list): Don't call continue |
| if aexpr is NULL. |
| (build_target_condition_list): Likewise. |
| |
| 2016-01-27 Kevin Buettner <kevinb@redhat.com> |
| |
| * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8 |
| bytes as aggregates. |
| |
| 2016-01-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as |
| Linespec Maintainers. |
| |
| 2016-01-26 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * common/common-utils.c (skip_spaces): Fix comment. |
| (skip_to_space_const): Likewise. |
| |
| 2016-01-25 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw): |
| Remove argument pc. Get pc by regcache_read_pc. Callers updated. |
| (arm_deal_with_atomic_sequence_raw): Likewise. |
| (thumb_get_next_pcs_raw): Likewise. |
| (arm_get_next_pcs_raw): Likewise. |
| (arm_get_next_pcs): Remove argument pc. Callers updated. |
| * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration. |
| |
| 2016-01-25 Mark Wielaard <mjw@redhat.com> |
| |
| * ada-lang.c (ada_evaluate_subexp): Add proper else block. |
| * c-typeprint.c (c_type_print_base): Fix misleading indentation of |
| if statement. |
| * inflow.c (child_terminal_ours_1): Fix misleading indentation of |
| statement block by introducing an else. |
| * linux-record.c (record_linux_sockaddr): Fix misleading indentation |
| of return statements. |
| (record_linux_msghdr): Likewise. |
| |
| 2016-01-25 Pedro Alves <palves@redhat.com> |
| |
| PR threads/19461 |
| * infrun.c (handle_inferior_event_1) <fork/vfork>: Update |
| parent/child running states. |
| |
| 2016-01-25 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/19494 |
| * linux-nat.c (kill_one_lwp): New, factored out from ... |
| (kill_callback): ... this. |
| (kill_wait_callback): New, factored out from ... |
| (kill_wait_one_lwp): ... this. |
| (kill_unfollowed_fork_children): New function. |
| (linux_nat_kill): Use it. |
| |
| 2016-01-22 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-nat.c (fbsd_pid_to_str): Adjust string format. |
| |
| 2016-01-22 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-linux-nat.c (fetch_fpregs): Call perror_with_name |
| instead of warning. |
| (store_fpregs, fetch_regs, store_regs): Likewise. |
| (fetch_wmmx_regs, store_wmmx_regs): Likewise. |
| (fetch_vfp_regs, store_vfp_regs): Likewise. |
| |
| 2016-01-21 Doug Evans <dje@google.com> |
| |
| * breakpoint.c (init_breakpoint_sal): Add comment. |
| |
| 2016-01-21 Marcin Kościelnicki <koriakin@0x04.net> |
| |
| * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection. |
| |
| 2016-01-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * disasm.c (maybe_add_dis_line_entry): Rename to... |
| (add_dis_line_entry): ...this, and update header comment. |
| (do_mixed_source_and_assembly): Now use add_dis_line_entry. |
| |
| 2016-01-21 Pedro Alves <palves@redhat.com> |
| |
| * Makefile.in (COMPILER_CFLAGS): New. |
| (CXXFLAGS): Get it from configure. |
| (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS |
| instead of CFLAGS. |
| * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST |
| COMPILER_CFLAGS. |
| * configure: Regenerate. |
| |
| 2016-01-21 Joel Brobecker <brobecker@adacore.com> |
| |
| * location.h (new_address_location): Add new parameters |
| "addr_string" and "addr_string_len". |
| (get_address_string_location): Add declaration. |
| * location.c (new_address_location): Add new parameters |
| "addr_string" and "addr_string_len". If not NULL, store |
| a copy of the addr_string in the new location as well. |
| (get_address_string_location): New function. |
| (string_to_event_location): Update call to new_address_location. |
| * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>: |
| Save the event location in the parser's state before |
| passing it to convert_address_location_to_sals. |
| * breakpoint.c (create_thread_event_breakpoint): Update call |
| to new_address_location. |
| (init_breakpoint_sal): Get the event location's string, if any, |
| and use it to update call to new_address_location. |
| * python/py-finishbreakpoint.c (bpfinishpy_init): |
| Update call to new_address_location. |
| * spu-tdep.c (spu_catch_start): Likewise. |
| |
| * config/djgpp/fnchange.lst: Add entries for |
| gdb/testsuite/gdb.base/break-fun-addr1.c and |
| gdb/testsuite/gdb.base/break-fun-addr2.c. |
| |
| 2016-01-21 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter |
| is_thumb and set it according to CPSR saved on the stack. |
| (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to |
| arm_linux_sigreturn_next_pc. |
| |
| 2016-01-20 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__): |
| Fix enumerators sort key function. |
| |
| 2016-01-20 Joel Brobecker <brobecker@adacore.com> |
| |
| * printcmd.c (print_scalar_formatted): Move binary operator from |
| end of line to beginning of next line. Adjust formatting |
| accordingly. |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of |
| "len" with sysctl. |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-tdep.c (find_stop_signal): Remove. |
| (struct fbsd_collect_regset_section_cb) <lwp>: New field. |
| <stop_signal>: New field. |
| <abort_iteration>: New field. |
| (fbsd_collect_regset_section_cb): Use new fields. |
| (fbsd_collect_thread_registers): New function. |
| (struct fbsd_corefile_thread_data): New structure. |
| (fbsd_corefile_thread): New function. |
| (fbsd_make_corefile_notes): Use new function to dump notes for each |
| non-exited thread in a process. |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * configure.ac: Check for support for LWP names on FreeBSD. |
| * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp. |
| [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] |
| (fbsd_fetch_kinfo_proc): Move function earlier. |
| [PT_LWPINFO] (fbsd_thread_alive): New function. |
| [PT_LWPINFO] (fbsd_pid_to_str): New function. |
| [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function. |
| [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function. |
| [PT_LWPINFO] (fbsd_add_threads): New function. |
| [PT_LWPINFO] (fbsd_update_thread_list): New function. |
| [PT_LWPINFO] New variable super_resume. |
| [PT_LWPINFO] (resume_one_thread_cb): New function. |
| [PT_LWPINFO] (resume_all_threads_cb): New function. |
| [PT_LWPINFO] (fbsd_resume): New function. |
| (fbsd_remember_child): Save full ptid instead of plain pid. |
| (fbsd_is_child_pending): Return ptid of saved child process. |
| (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on |
| first stop. |
| [PT_LWP_EVENTS] Handle LWP events. |
| [TDP_RFPPWAIT] Include LWP in child ptid. |
| (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events. |
| (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events. |
| Add threads for existing processes. |
| (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to |
| "fbsd_thread_alive". |
| Set "to_pid_to_str" to "fbsd_pid_to_str". |
| [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to |
| "fbsd_thread_name". |
| [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list". |
| Set "to_has_thread_control" to "tc_schedlock". |
| Set "to_resume" to "fbsd_resume". |
| (_initialize_fbsd_nat): New function. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use |
| get_ptrace_pid. |
| (amd64bsd_store_inferior_registers): Use get_ptrace_pid. |
| (amd64bsd_dr_get): Use get_ptrace_pid. |
| (amd64bsd_dr_set): Use get_ptrace_pid. |
| * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid. |
| (i386bsd_store_inferior_registers): Use get_ptrace_pid. |
| (i386bsd_dr_get): Use get_ptrace_pid. |
| (i386bsd_dr_set): Use get_ptrace_pid. |
| * inf-ptrace.c (get_ptrace_pid): Export. |
| * inf-ptrace.h (get_ptrace_pid): Declare. |
| * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id. |
| (ppcfbsd_store_inferior_registers): Use lwp id. |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd_tdep.c (fbsd_core_pid_to_str): New function. |
| (fbsd_core_thread_name): New function. |
| (fbsd_init_abi): Add "core_pid_to_str" gdbarch method. |
| Add "core_thread_name" gdbarch method. |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * corelow.c (core_thread_name): New function. |
| (init_core_ops): Use "core_thread_name" for the "to_thread_name" |
| target op. |
| * gdbarch.sh (core_thread_name): New gdbarch callback. |
| * gdbarch.h: Re-generate. |
| * gdbarch.c: Re-generate. |
| |
| 2016-01-19 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly |
| convert gdb.Value to integer type using int(). |
| |
| 2016-01-19 John Baldwin <jhb@FreeBSD.org> |
| |
| * configure.ac: Include <sys/types.h when checking for "r_fs" in |
| "struct reg". |
| * configure: Regenerate. |
| |
| 2016-01-19 Pedro Alves <palves@redhat.com> |
| |
| * ax-gdb.c (agent_command_1): Adjust call to decode_line_full. |
| * break-catch-throw.c (re_set_exception_catchpoint): Pass the |
| current program space down to linespec decoding and breakpoint |
| location updating. |
| * breakpoint.c (parse_breakpoint_sals): Adjust calls to |
| decode_line_full. |
| (until_break_command): Adjust calls to decode_line_1. |
| (base_breakpoint_decode_location, bkpt_decode_location): Add |
| 'search_pspace' parameter. Pass it along. |
| (bkpt_probe_create_sals_from_location): Adjust calls to |
| parse_probes. |
| (tracepoint_decode_location, tracepoint_probe_decode_location) |
| (strace_marker_decode_location): Add 'search_pspace' parameter. |
| Pass it along. |
| (all_locations_are_pending): Rewrite to take a breakpoint and |
| program space as arguments instead. |
| (hoist_existing_locations): New function. |
| (update_breakpoint_locations): Add 'filter_pspace' parameter. Use |
| hoist_existing_locations instead of always removing all locations, |
| and adjust to all_locations_are_pending change. |
| (location_to_sals): Add 'search_pspace' parameter. Pass it along. |
| Don't disable the breakpoint if there are other locations in |
| another program space. |
| (breakpoint_re_set_default): Adjust to pass down the current |
| program space as filter program space. |
| (decode_location_default): Add 'search_pspace' parameter and pass |
| it along. |
| (prepare_re_set_context): Don't switch program space here. |
| (breakpoint_re_set): Use save_current_space_and_thread instead of |
| save_current_program_space. |
| * breakpoint.h (struct breakpoint_ops) <decode_location>: Add |
| 'search_pspace' parameter. |
| (update_breakpoint_locations): Add 'filter_pspace' parameter. |
| * cli/cli-cmds.c (edit_command, list_command): Adjust calls to |
| decode_line_1. |
| * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current |
| program space as filter program space. |
| * linespec.c (struct linespec_state) <search_pspace>: New field. |
| (create_sals_line_offset, convert_explicit_location_to_sals) |
| (parse_linespec): Pass the search program space down. |
| (linespec_state_constructor): Add 'search_pspace' parameter. |
| Store it. |
| (linespec_parser_new): Add 'search_pspace' parameter and pass it |
| along. |
| (linespec_lex_to_end): Adjust. |
| (decode_line_full, decode_line_1): Add 'search_pspace' parameter |
| and pass it along. |
| (decode_line_with_last_displayed): Adjust. |
| (collect_symtabs_from_filename, symtabs_from_filename): New |
| 'search_pspace' parameter. Use it. |
| (find_function_symbols): Pass the search program space down. |
| * linespec.h (decode_line_1, decode_line_full): Add |
| 'search_pspace' parameter. |
| * probe.c (parse_probes_in_pspace): New function, factored out |
| from ... |
| (parse_probes): ... this. Add 'search_pspace' parameter and use |
| it. |
| * probe.h (parse_probes): Add pspace' parameter. |
| * python/python.c (gdbpy_decode_line): Adjust. |
| * tracepoint.c (scope_info): Adjust. |
| |
| 2016-01-18 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS |
| instruction support. |
| (micromips_next_pc): Likewise. |
| (micromips_scan_prologue): Likewise. |
| (micromips_deal_with_atomic_sequence): Likewise. |
| (micromips_stack_frame_destroyed_p): Likewise. |
| (mips_breakpoint_from_pc): Likewise. |
| |
| 2016-01-18 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass |
| unshifted 16-bit microMIPS instruction word to `mips_insn_size'. |
| |
| 2016-01-18 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention that GDB now displays the ID and name of the |
| thread that hit a breakpoint or received a signal. |
| * break-catch-sig.c (signal_catchpoint_print_it): Use |
| maybe_print_thread_hit_breakpoint. |
| * break-catch-syscall.c (print_it_catch_syscall): Likewise. |
| * break-catch-throw.c (print_it_exception_catchpoint): Likewise. |
| * breakpoint.c (maybe_print_thread_hit_breakpoint): New function. |
| (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib) |
| (print_it_catch_exec, print_it_ranged_breakpoint) |
| (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it): |
| Use maybe_print_thread_hit_breakpoint. |
| * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare. |
| * gdbthread.h (show_thread_that_caused_stop): Declare. |
| * infrun.c (print_signal_received_reason): Print which thread |
| received signal. |
| * thread.c (show_thread_that_caused_stop): New function. |
| |
| 2016-01-18 Gary Benson <gbenson@redhat.com> |
| |
| * nat/linux-namespaces.c (do_fork): New function. |
| (linux_mntns_get_helper): Use the above. |
| |
| 2016-01-17 Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de> (tiny change) |
| |
| Pushed by Joel Brobecker <brobecker@adacore.com>. |
| PR gdb/19208 |
| * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name |
| if the function has no name. |
| |
| 2016-01-15 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET): |
| Conditionalize for Windows host. |
| (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET. |
| (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32. |
| (phony_iconv_open): Handle both UTF-32 endiannesses. |
| (phony_iconv): Likewise. Check for output overflow and clean up |
| out-of-input cases. Correct adjustment to input buffer pointer. |
| (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match |
| phony_iconv_open. |
| |
| 2016-01-15 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention star wildcard ranges. |
| * cli/cli-utils.c (get_number_or_range): Check state->in_range first. |
| (number_range_setup_range): New function. |
| * cli/cli-utils.h (number_range_setup_range): New declaration. |
| * thread.c (thread_apply_command): Support star TID ranges. |
| * tid-parse.c (tid_range_parser_finished) |
| (tid_range_parser_string, tid_range_parser_skip) |
| (get_tid_or_range, get_tid_or_range): Handle |
| TID_RANGE_STATE_STAR_RANGE. |
| (tid_range_parser_star_range): New function. |
| * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>: |
| New value. |
| (tid_range_parser_star_range): New declaration. |
| |
| 2016-01-15 Pedro Alves <palves@redhat.com> |
| |
| * thread.c (thread_apply_command): Use the tid range parser to |
| advance past the thread ID list. |
| * tid-parse.c (get_positive_number_trailer): New function. |
| (parse_thread_id): Use it. |
| (get_tid_or_range): Use it. Return 0 instead of throwing invalid |
| thread ID error. |
| (get_tid_or_range): Detect negative values. Return 0 instead of |
| throwing invalid thread ID error. |
| |
| 2016-01-14 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc): |
| Declare. |
| (arm_linux_get_next_pcs_ops): Install |
| arm_linux_get_next_pcs_syscall_next_pc. |
| (arm_linux_syscall_next_pc): Change to ... |
| (arm_linux_get_next_pcs_syscall_next_pc): ... it. |
| (arm_linux_init_abi): Don't set tdep->syscall_next_pc. |
| * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare. |
| (arm_get_next_pcs_syscall_next_pc): Make it static. Don't |
| call tdep->syscall_next_pc. |
| * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove. |
| (arm_get_next_pcs_syscall_next_pc): Remove. |
| |
| 2016-01-14 Yao Qi <yao.qi@linaro.org> |
| |
| * remote.c (remote_set_syscall_catchpoint): Cast to char *. |
| * thread.c (do_captured_thread_select): Cast to const char *. |
| |
| 2016-01-14 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change |
| argument arm_thumb2_breakpoint to has_thumb2_breakpoint. |
| (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint |
| instead. |
| * arch/arm-get-next-pcs.h (struct arm_get_next_pcs) |
| <arm_thumb2_breakpoint>: Remove. |
| <has_thumb2_breakpoint>: New field. |
| (arm_get_next_pcs_ctor): Update declaration. |
| * arm-linux-tdep.c (arm_linux_software_single_step): Pass |
| 1 to arm_get_next_pcs_ctor. |
| * arm-tdep.c (arm_software_single_step): Pass 0 to |
| arm_get_next_pcs_ctor. |
| |
| 2016-01-13 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * MAINTAINERS: Add Andreas Arnez as s390 target maintainer. |
| |
| 2016-01-13 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use |
| byte_order_for_code to read instruction. |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention $_gthread. |
| * gdbthread.h (struct thread_info) <global_num>: Mention |
| $_gthread. |
| * thread.c (thread_num_make_value_helper): New function. |
| (thread_id_make_value): Delete. |
| (thread_id_per_inf_num_make_value, global_thread_id_make_value): |
| New. |
| (thread_funcs): Adjust. |
| (gthread_funcs): New. |
| (_initialize_thread): Register $_gthread variable. |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention "info threads -gid". |
| * gdbthread.h (struct thread_info) <global_num>: Mention "info |
| threads -gid". |
| * thread.c (info_threads_command): Handle "-gid". |
| (_initialize_thread): Adjust "info threads" help string to mention |
| -gid. |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention InferiorThread.global_num. |
| * python/py-infthread.c (thpy_get_global_num): New function. |
| (thread_object_getset): Register "global_num". |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention that thread IDs are now per inferior and global |
| thread IDs. |
| * Makefile.in (SFILES): Add tid-parse.c. |
| (COMMON_OBS): Add tid-parse.o. |
| (HFILES_NO_SRCDIR): Add tid-parse.h. |
| * ada-tasks.c: Adjust to use ptid_to_global_thread_id. |
| * breakpoint.c (insert_breakpoint_locations) |
| (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions) |
| (print_one_breakpoint_location, set_longjmp_breakpoint) |
| (check_longjmp_breakpoint_for_call_dummy) |
| (set_momentary_breakpoint): Adjust to use global IDs. |
| (find_condition_and_thread, watch_command_1): Use parse_thread_id. |
| (until_break_command, longjmp_bkpt_dtor) |
| (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust |
| to use global IDs. |
| * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use |
| ptid_to_global_thread_id. |
| * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise. |
| * gdbthread.h (struct thread_info): Rename field 'num' to |
| 'global_num. Add new fields 'per_inf_num' and 'inf'. |
| (thread_id_to_pid): Rename thread_id_to_pid to |
| global_thread_id_to_ptid. |
| (pid_to_thread_id): Rename to ... |
| (ptid_to_global_thread_id): ... this. |
| (valid_thread_id): Rename to ... |
| (valid_global_thread_id): ... this. |
| (find_thread_id): Rename to ... |
| (find_thread_global_id): ... this. |
| (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare. |
| (print_thread_info): Add comment. |
| * tid-parse.h: New file. |
| * tid-parse.c: New file. |
| * infcmd.c (step_command_fsm_prepare) |
| (step_command_fsm_should_stop): Adjust to use the global thread |
| ID. |
| (until_next_command, until_next_command) |
| (finish_command_fsm_should_stop): Adjust to use the global thread |
| ID. |
| (attach_post_wait): Adjust to check the inferior number too. |
| * inferior.h (struct inferior) <highest_thread_num>: New field. |
| * infrun.c (handle_signal_stop) |
| (insert_exception_resume_breakpoint) |
| (insert_exception_resume_from_probe): Adjust to use the global |
| thread ID. |
| * record-btrace.c (record_btrace_open): Use global thread IDs. |
| * remote.c (process_initial_stop_replies): Also consider the |
| inferior number. |
| * target.c (target_pre_inferior): Clear the inferior's highest |
| thread num. |
| * thread.c (clear_thread_inferior_resources): Adjust to use the |
| global thread ID. |
| (new_thread): New inferior parameter. Adjust to use it. Set both |
| the thread's global ID and the thread's per-inferior ID. |
| (add_thread_silent): Adjust. |
| (find_thread_global_id): New. |
| (find_thread_id): Make static. Adjust to rename. |
| (valid_thread_id): Rename to ... |
| (valid_global_thread_id): ... this. |
| (pid_to_thread_id): Rename to ... |
| (ptid_to_global_thread_id): ... this. |
| (thread_id_to_pid): Rename to ... |
| (global_thread_id_to_ptid): ... this. Adjust. |
| (first_thread_of_process): Adjust. |
| (do_captured_list_thread_ids): Adjust to use global thread IDs. |
| (should_print_thread): New function. |
| (print_thread_info): Rename to ... |
| (print_thread_info_1): ... this, and add new show_global_ids |
| parameter. Handle it. Iterate over inferiors. |
| (print_thread_info): Reimplement as wrapper around |
| print_thread_info_1. |
| (show_inferior_qualified_tids): New function. |
| (print_thread_id): Use it. |
| (tp_array_compar): Compare inferior numbers too. |
| (thread_apply_command): Use tid_range_parser. |
| (do_captured_thread_select): Use parse_thread_id. |
| (thread_id_make_value): Adjust. |
| (_initialize_thread): Adjust "info threads" help string. |
| * varobj.c (struct varobj_root): Update comment. |
| (varobj_create): Adjust to use global thread IDs. |
| (value_of_root_1): Adjust to use global_thread_id_to_ptid. |
| * windows-tdep.c (display_tib): No longer accept an argument. |
| * cli/cli-utils.c (get_number_trailer): Make extern. |
| * cli/cli-utils.h (get_number_trailer): Declare. |
| (get_number_const): Adjust documentation. |
| * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global |
| thread IDs. |
| * mi/mi-interp.c (mi_new_thread, mi_thread_exit) |
| (mi_on_normal_stop, mi_output_running_pid, mi_on_resume): |
| * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise. |
| * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x): |
| Likewise. |
| * python/py-breakpoint.c (bppy_set_thread): Likewise. |
| * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. |
| * python/py-infthread.c (thpy_get_num): Add comment and return the |
| per-inferior thread ID. |
| (thread_object_getset): Update comment of "num". |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * breakpoint.c (remove_threaded_breakpoints) |
| (print_one_breakpoint_location): Use print_thread_id. |
| * btrace.c (btrace_enable, btrace_disable, btrace_teardown) |
| (btrace_fetch, btrace_clear): Use print_thread_id. |
| * common/print-utils.c (CELLSIZE): Delete. |
| (get_cell): Rename to ... |
| (get_print_cell): ... this and made extern. Adjust call callers. |
| Adjust to use PRINT_CELL_SIZE. |
| * common/print-utils.h (get_print_cell): Declare. |
| (PRINT_CELL_SIZE): New. |
| * gdbthread.h (print_thread_id): Declare. |
| * infcmd.c (signal_command): Use print_thread_id. |
| * inferior.c (print_inferior): Use print_thread_id. |
| * infrun.c (handle_signal_stop) |
| (insert_exception_resume_breakpoint) |
| (insert_exception_resume_from_probe) |
| (print_signal_received_reason): Use print_thread_id. |
| * record-btrace.c (record_btrace_info) |
| (record_btrace_resume_thread, record_btrace_cancel_resume) |
| (record_btrace_step_thread, record_btrace_wait): Use |
| print_thread_id. |
| * thread.c (thread_apply_all_command): Use print_thread_id. |
| (print_thread_id): New function. |
| (thread_apply_command): Use print_thread_id. |
| (thread_command, thread_find_command, do_captured_thread_select): |
| Use print_thread_id. |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention InferiorThread.inferior. |
| * python/py-infthread.c (thpy_get_inferior): New. |
| (thread_object_getset): Register "inferior". |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| * NEWS: Mention $_inferior. |
| * inferior.c (inferior_id_make_value): New. |
| (inferior_funcs): New. |
| (_initialize_inferior): Create $_inferior variable. |
| |
| 2016-01-13 Pedro Alves <palves@redhat.com> |
| |
| PR breakpoints/19388 |
| * frame.c (get_current_frame): Use validate_registers_access. |
| * gdbthread.h (validate_registers_access): Declare. |
| * infrun.c (validate_siginfo_access): Delete. |
| (siginfo_value_read, siginfo_value_write): Use |
| validate_registers_access. |
| * thread.c (validate_registers_access): New function. |
| |
| 2016-01-12 Josh Stone <jistone@redhat.com> |
| Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the |
| syscall_entry and syscall_return stop reasons. Mention GDB |
| support for remote catch syscall. |
| * remote.c (PACKET_QCatchSyscalls): New enum. |
| (remote_set_syscall_catchpoint): New function. |
| (remote_protocol_features): New element for QCatchSyscalls. |
| (remote_parse_stop_reply): Parse syscall_entry/return stops. |
| (init_remote_ops): Install remote_set_syscall_catchpoint. |
| (_initialize_remote): Config QCatchSyscalls. |
| * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo. |
| |
| 2016-01-12 Yao Qi <yao.qi@linaro.org> |
| |
| * nat/linux-ptrace.c (linux_child_function): Cast child_stack |
| to gdb_byte * and pass to linux_fork_to_function. |
| |
| 2016-01-12 Yao Qi <yao.qi@linaro.org> |
| |
| * nat/linux-ptrace.c (linux_fork_to_function): Change type |
| of argument 'function'. |
| (linux_grandchild_function): Change return type to 'int'. |
| Change child_stack's type to 'void *'. |
| (linux_child_function): Likewise. |
| |
| 2016-01-12 Pedro Alves <palves@redhat.com> |
| |
| Remove use of the registered trademark symbol throughout. |
| |
| 2016-01-12 Thomas Schwinge <thomas@codesourcery.com> |
| |
| * reply_mig_hack.awk: Rewrite one regular expression. |
| |
| 2016-01-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * acinclude.m4: Include new warning.m4 file. |
| * configure: Regenerated. |
| * configure.ac: Move all warning logic ... |
| * warning.m4: ... here. |
| |
| 2016-01-08 Yao Qi <yao.qi@linaro.org> |
| |
| * extension.c: Include target.h. |
| (set_active_ext_lang): Only call install_gdb_sigint_handler, |
| check_quit_flag, and set_quit_flag if target_terminal_is_ours |
| returns false. |
| (restore_active_ext_lang): Likewise. |
| * target.c (target_terminal_is_ours): New function. |
| * target.h (target_terminal_is_ours): Declare. |
| |
| 2016-01-07 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status' |
| to `err' in the little-endian leg. |
| |
| 2016-01-06 Yao Qi <yao.qi@linaro.org> |
| |
| * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some |
| lines below. |
| (thumb_get_next_pcs_raw): Make it static. |
| (arm_get_next_pcs_raw): Likewise. |
| * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the |
| declaration. |
| (arm_get_next_pcs_raw): Likewise. |
| |
| 2016-01-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * version.in: Change cvs to git. |
| |
| 2016-01-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.tgt (score-*-*): Delete gdb_sim assignment. |
| |
| 2016-01-05 Pedro Alves <palves@redhat.com> |
| |
| PR sim/13418 |
| * configure.ac: Define WITH_PPC_SIM when linking in the sim and |
| the target is powerpc*. |
| * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead |
| of WITH_SIM. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2016-01-04 Markus Metzger <markus.t.metzger@intel.com> |
| |
| * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH. |
| |
| 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.tgt (powerpc*-*-*): Delete test call and |
| always assign gdb_sim. |
| |
| 2016-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Update year range in copyright notice of all files. |
| |
| 2016-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Change copyright year in version |
| message. |
| |
| 2016-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015. |
| |
| For older changes see ChangeLog-2015. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |