| This is Info file history.info, produced by Makeinfo version 1.67 from |
| the input file /usr/homes/chet/src/bash/readline-src/doc/hist.texinfo. |
| |
| INFO-DIR-SECTION Libraries |
| START-INFO-DIR-ENTRY |
| * History: (history). The GNU history library API |
| END-INFO-DIR-ENTRY |
| |
| This document describes the GNU History library, a programming tool |
| that provides a consistent user interface for recalling lines of |
| previously typed input. |
| |
| Copyright (C) 1988-1999 Free Software Foundation, Inc. |
| |
| Permission is granted to make and distribute verbatim copies of this |
| manual provided the copyright notice and this permission notice pare |
| preserved on all copies. |
| |
| Permission is granted to copy and distribute modified versions of |
| this manual under the conditions for verbatim copying, provided that |
| the entire resulting derived work is distributed under the terms of a |
| permission notice identical to this one. |
| |
| Permission is granted to copy and distribute translations of this |
| manual into another language, under the above conditions for modified |
| versions, except that this permission notice may be stated in a |
| translation approved by the Free Software Foundation. |
| |
| |
| File: history.info, Node: Top, Next: Using History Interactively, Up: (dir) |
| |
| GNU History Library |
| ******************* |
| |
| This document describes the GNU History library, a programming tool |
| that provides a consistent user interface for recalling lines of |
| previously typed input. |
| |
| * Menu: |
| |
| * Using History Interactively:: GNU History User's Manual. |
| * Programming with GNU History:: GNU History Programmer's Manual. |
| * Concept Index:: Index of concepts described in this manual. |
| * Function and Variable Index:: Index of externally visible functions |
| and variables. |
| |
| |
| File: history.info, Node: Using History Interactively, Next: Programming with GNU History, Prev: Top, Up: Top |
| |
| Using History Interactively |
| *************************** |
| |
| This chapter describes how to use the GNU History Library |
| interactively, from a user's standpoint. It should be considered a |
| user's guide. For information on using the GNU History Library in your |
| own programs, *note Programming with GNU History::.. |
| |
| * Menu: |
| |
| * History Interaction:: What it feels like using History as a user. |
| |
| |
| File: history.info, Node: History Interaction, Up: Using History Interactively |
| |
| History Expansion |
| ================= |
| |
| The History library provides a history expansion feature that is |
| similar to the history expansion provided by `csh'. This section |
| describes the syntax used to manipulate the history information. |
| |
| History expansions introduce words from the history list into the |
| input stream, making it easy to repeat commands, insert the arguments |
| to a previous command into the current input line, or fix errors in |
| previous commands quickly. |
| |
| History expansion takes place in two parts. The first is to |
| determine which line from the history list should be used during |
| substitution. The second is to select portions of that line for |
| inclusion into the current one. The line selected from the history is |
| called the "event", and the portions of that line that are acted upon |
| are called "words". Various "modifiers" are available to manipulate |
| the selected words. The line is broken into words in the same fashion |
| that Bash does, so that several words surrounded by quotes are |
| considered one word. History expansions are introduced by the |
| appearance of the history expansion character, which is `!' by default. |
| |
| * Menu: |
| |
| * Event Designators:: How to specify which history line to use. |
| * Word Designators:: Specifying which words are of interest. |
| * Modifiers:: Modifying the results of substitution. |
| |
| |
| File: history.info, Node: Event Designators, Next: Word Designators, Up: History Interaction |
| |
| Event Designators |
| ----------------- |
| |
| An event designator is a reference to a command line entry in the |
| history list. |
| |
| `!' |
| Start a history substitution, except when followed by a space, tab, |
| the end of the line, `=' or `('. |
| |
| `!N' |
| Refer to command line N. |
| |
| `!-N' |
| Refer to the command N lines back. |
| |
| `!!' |
| Refer to the previous command. This is a synonym for `!-1'. |
| |
| `!STRING' |
| Refer to the most recent command starting with STRING. |
| |
| `!?STRING[?]' |
| Refer to the most recent command containing STRING. The trailing |
| `?' may be omitted if the STRING is followed immediately by a |
| newline. |
| |
| `^STRING1^STRING2^' |
| Quick Substitution. Repeat the last command, replacing STRING1 |
| with STRING2. Equivalent to `!!:s/STRING1/STRING2/'. |
| |
| `!#' |
| The entire command line typed so far. |
| |
| |
| File: history.info, Node: Word Designators, Next: Modifiers, Prev: Event Designators, Up: History Interaction |
| |
| Word Designators |
| ---------------- |
| |
| Word designators are used to select desired words from the event. A |
| `:' separates the event specification from the word designator. It may |
| be omitted if the word designator begins with a `^', `$', `*', `-', or |
| `%'. Words are numbered from the beginning of the line, with the first |
| word being denoted by 0 (zero). Words are inserted into the current |
| line separated by single spaces. |
| |
| `0 (zero)' |
| The `0'th word. For many applications, this is the command word. |
| |
| `N' |
| The Nth word. |
| |
| `^' |
| The first argument; that is, word 1. |
| |
| `$' |
| The last argument. |
| |
| `%' |
| The word matched by the most recent `?STRING?' search. |
| |
| `X-Y' |
| A range of words; `-Y' abbreviates `0-Y'. |
| |
| `*' |
| All of the words, except the `0'th. This is a synonym for `1-$'. |
| It is not an error to use `*' if there is just one word in the |
| event; the empty string is returned in that case. |
| |
| `X*' |
| Abbreviates `X-$' |
| |
| `X-' |
| Abbreviates `X-$' like `X*', but omits the last word. |
| |
| If a word designator is supplied without an event specification, the |
| previous command is used as the event. |
| |
| |
| File: history.info, Node: Modifiers, Prev: Word Designators, Up: History Interaction |
| |
| Modifiers |
| --------- |
| |
| After the optional word designator, you can add a sequence of one or |
| more of the following modifiers, each preceded by a `:'. |
| |
| `h' |
| Remove a trailing pathname component, leaving only the head. |
| |
| `t' |
| Remove all leading pathname components, leaving the tail. |
| |
| `r' |
| Remove a trailing suffix of the form `.SUFFIX', leaving the |
| basename. |
| |
| `e' |
| Remove all but the trailing suffix. |
| |
| `p' |
| Print the new command but do not execute it. |
| |
| `s/OLD/NEW/' |
| Substitute NEW for the first occurrence of OLD in the event line. |
| Any delimiter may be used in place of `/'. The delimiter may be |
| quoted in OLD and NEW with a single backslash. If `&' appears in |
| NEW, it is replaced by OLD. A single backslash will quote the |
| `&'. The final delimiter is optional if it is the last character |
| on the input line. |
| |
| `&' |
| Repeat the previous substitution. |
| |
| `g' |
| Cause changes to be applied over the entire event line. Used in |
| conjunction with `s', as in `gs/OLD/NEW/', or with `&'. |
| |
| |
| File: history.info, Node: Programming with GNU History, Next: Concept Index, Prev: Using History Interactively, Up: Top |
| |
| Programming with GNU History |
| **************************** |
| |
| This chapter describes how to interface programs that you write with |
| the GNU History Library. It should be considered a technical guide. |
| For information on the interactive use of GNU History, *note Using |
| History Interactively::.. |
| |
| * Menu: |
| |
| * Introduction to History:: What is the GNU History library for? |
| * History Storage:: How information is stored. |
| * History Functions:: Functions that you can use. |
| * History Variables:: Variables that control behaviour. |
| * History Programming Example:: Example of using the GNU History Library. |
| |
| |
| File: history.info, Node: Introduction to History, Next: History Storage, Up: Programming with GNU History |
| |
| Introduction to History |
| ======================= |
| |
| Many programs read input from the user a line at a time. The GNU |
| History library is able to keep track of those lines, associate |
| arbitrary data with each line, and utilize information from previous |
| lines in composing new ones. |
| |
| The programmer using the History library has available functions for |
| remembering lines on a history list, associating arbitrary data with a |
| line, removing lines from the list, searching through the list for a |
| line containing an arbitrary text string, and referencing any line in |
| the list directly. In addition, a history "expansion" function is |
| available which provides for a consistent user interface across |
| different programs. |
| |
| The user using programs written with the History library has the |
| benefit of a consistent user interface with a set of well-known |
| commands for manipulating the text of previous lines and using that text |
| in new commands. The basic history manipulation commands are similar to |
| the history substitution provided by `csh'. |
| |
| If the programmer desires, he can use the Readline library, which |
| includes some history manipulation by default, and has the added |
| advantage of command line editing. |
| |
| |
| File: history.info, Node: History Storage, Next: History Functions, Prev: Introduction to History, Up: Programming with GNU History |
| |
| History Storage |
| =============== |
| |
| The history list is an array of history entries. A history entry is |
| declared as follows: |
| |
| typedef struct _hist_entry { |
| char *line; |
| char *data; |
| } HIST_ENTRY; |
| |
| The history list itself might therefore be declared as |
| |
| HIST_ENTRY **the_history_list; |
| |
| The state of the History library is encapsulated into a single |
| structure: |
| |
| /* A structure used to pass the current state of the history stuff around. */ |
| typedef struct _hist_state { |
| HIST_ENTRY **entries; /* Pointer to the entries themselves. */ |
| int offset; /* The location pointer within this array. */ |
| int length; /* Number of elements within this array. */ |
| int size; /* Number of slots allocated to this array. */ |
| int flags; |
| } HISTORY_STATE; |
| |
| If the flags member includes `HS_STIFLED', the history has been |
| stifled. |
| |
| |
| File: history.info, Node: History Functions, Next: History Variables, Prev: History Storage, Up: Programming with GNU History |
| |
| History Functions |
| ================= |
| |
| This section describes the calling sequence for the various functions |
| present in GNU History. |
| |
| * Menu: |
| |
| * Initializing History and State Management:: Functions to call when you |
| want to use history in a |
| program. |
| * History List Management:: Functions used to manage the list |
| of history entries. |
| * Information About the History List:: Functions returning information about |
| the history list. |
| * Moving Around the History List:: Functions used to change the position |
| in the history list. |
| * Searching the History List:: Functions to search the history list |
| for entries containing a string. |
| * Managing the History File:: Functions that read and write a file |
| containing the history list. |
| * History Expansion:: Functions to perform csh-like history |
| expansion. |
| |
| |
| File: history.info, Node: Initializing History and State Management, Next: History List Management, Up: History Functions |
| |
| Initializing History and State Management |
| ----------------------------------------- |
| |
| This section describes functions used to initialize and manage the |
| state of the History library when you want to use the history functions |
| in your program. |
| |
| - Function: void using_history () |
| Begin a session in which the history functions might be used. This |
| initializes the interactive variables. |
| |
| - Function: HISTORY_STATE * history_get_history_state () |
| Return a structure describing the current state of the input |
| history. |
| |
| - Function: void history_set_history_state (HISTORY_STATE *state) |
| Set the state of the history list according to STATE. |
| |
| |
| File: history.info, Node: History List Management, Next: Information About the History List, Prev: Initializing History and State Management, Up: History Functions |
| |
| History List Management |
| ----------------------- |
| |
| These functions manage individual entries on the history list, or set |
| parameters managing the list itself. |
| |
| - Function: void add_history (char *string) |
| Place STRING at the end of the history list. The associated data |
| field (if any) is set to `NULL'. |
| |
| - Function: HIST_ENTRY * remove_history (int which) |
| Remove history entry at offset WHICH from the history. The |
| removed element is returned so you can free the line, data, and |
| containing structure. |
| |
| - Function: HIST_ENTRY * replace_history_entry (int which, char *line, |
| char *data) |
| Make the history entry at offset WHICH have LINE and DATA. This |
| returns the old entry so you can dispose of the data. In the case |
| of an invalid WHICH, a `NULL' pointer is returned. |
| |
| - Function: void clear_history () |
| Clear the history list by deleting all the entries. |
| |
| - Function: void stifle_history (int max) |
| Stifle the history list, remembering only the last MAX entries. |
| |
| - Function: int unstifle_history () |
| Stop stifling the history. This returns the previous amount the |
| history was stifled. The value is positive if the history was |
| stifled, negative if it wasn't. |
| |
| - Function: int history_is_stifled () |
| Returns non-zero if the history is stifled, zero if it is not. |
| |
| |
| File: history.info, Node: Information About the History List, Next: Moving Around the History List, Prev: History List Management, Up: History Functions |
| |
| Information About the History List |
| ---------------------------------- |
| |
| These functions return information about the entire history list or |
| individual list entries. |
| |
| - Function: HIST_ENTRY ** history_list () |
| Return a `NULL' terminated array of `HIST_ENTRY' which is the |
| current input history. Element 0 of this list is the beginning of |
| time. If there is no history, return `NULL'. |
| |
| - Function: int where_history () |
| Returns the offset of the current history element. |
| |
| - Function: HIST_ENTRY * current_history () |
| Return the history entry at the current position, as determined by |
| `where_history ()'. If there is no entry there, return a `NULL' |
| pointer. |
| |
| - Function: HIST_ENTRY * history_get (int offset) |
| Return the history entry at position OFFSET, starting from |
| `history_base'. If there is no entry there, or if OFFSET is |
| greater than the history length, return a `NULL' pointer. |
| |
| - Function: int history_total_bytes () |
| Return the number of bytes that the primary history entries are |
| using. This function returns the sum of the lengths of all the |
| lines in the history. |
| |
| |
| File: history.info, Node: Moving Around the History List, Next: Searching the History List, Prev: Information About the History List, Up: History Functions |
| |
| Moving Around the History List |
| ------------------------------ |
| |
| These functions allow the current index into the history list to be |
| set or changed. |
| |
| - Function: int history_set_pos (int pos) |
| Set the position in the history list to POS, an absolute index |
| into the list. |
| |
| - Function: HIST_ENTRY * previous_history () |
| Back up the current history offset to the previous history entry, |
| and return a pointer to that entry. If there is no previous |
| entry, return a `NULL' pointer. |
| |
| - Function: HIST_ENTRY * next_history () |
| Move the current history offset forward to the next history entry, |
| and return the a pointer to that entry. If there is no next |
| entry, return a `NULL' pointer. |
| |
| |
| File: history.info, Node: Searching the History List, Next: Managing the History File, Prev: Moving Around the History List, Up: History Functions |
| |
| Searching the History List |
| -------------------------- |
| |
| These functions allow searching of the history list for entries |
| containing a specific string. Searching may be performed both forward |
| and backward from the current history position. The search may be |
| "anchored", meaning that the string must match at the beginning of the |
| history entry. |
| |
| - Function: int history_search (char *string, int direction) |
| Search the history for STRING, starting at the current history |
| offset. If DIRECTION < 0, then the search is through previous |
| entries, else through subsequent. If STRING is found, then the |
| current history index is set to that history entry, and the value |
| returned is the offset in the line of the entry where STRING was |
| found. Otherwise, nothing is changed, and a -1 is returned. |
| |
| - Function: int history_search_prefix (char *string, int direction) |
| Search the history for STRING, starting at the current history |
| offset. The search is anchored: matching lines must begin with |
| STRING. If DIRECTION < 0, then the search is through previous |
| entries, else through subsequent. If STRING is found, then the |
| current history index is set to that entry, and the return value |
| is 0. Otherwise, nothing is changed, and a -1 is returned. |
| |
| - Function: int history_search_pos (char *string, int direction, int |
| pos) |
| Search for STRING in the history list, starting at POS, an |
| absolute index into the list. If DIRECTION is negative, the search |
| proceeds backward from POS, otherwise forward. Returns the |
| absolute index of the history element where STRING was found, or |
| -1 otherwise. |
| |
| |
| File: history.info, Node: Managing the History File, Next: History Expansion, Prev: Searching the History List, Up: History Functions |
| |
| Managing the History File |
| ------------------------- |
| |
| The History library can read the history from and write it to a file. |
| This section documents the functions for managing a history file. |
| |
| - Function: int read_history (char *filename) |
| Add the contents of FILENAME to the history list, a line at a |
| time. If FILENAME is `NULL', then read from `~/.history'. |
| Returns 0 if successful, or errno if not. |
| |
| - Function: int read_history_range (char *filename, int from, int to) |
| Read a range of lines from FILENAME, adding them to the history |
| list. Start reading at line FROM and end at TO. If FROM is zero, |
| start at the beginning. If TO is less than FROM, then read until |
| the end of the file. If FILENAME is `NULL', then read from |
| `~/.history'. Returns 0 if successful, or `errno' if not. |
| |
| - Function: int write_history (char *filename) |
| Write the current history to FILENAME, overwriting FILENAME if |
| necessary. If FILENAME is `NULL', then write the history list to |
| `~/.history'. Values returned are as in `read_history ()'. |
| |
| - Function: int append_history (int nelements, char *filename) |
| Append the last NELEMENTS of the history list to FILENAME. |
| |
| - Function: int history_truncate_file (char *filename, int nlines) |
| Truncate the history file FILENAME, leaving only the last NLINES |
| lines. |
| |
| |
| File: history.info, Node: History Expansion, Prev: Managing the History File, Up: History Functions |
| |
| History Expansion |
| ----------------- |
| |
| These functions implement `csh'-like history expansion. |
| |
| - Function: int history_expand (char *string, char **output) |
| Expand STRING, placing the result into OUTPUT, a pointer to a |
| string (*note History Interaction::.). Returns: |
| `0' |
| If no expansions took place (or, if the only change in the |
| text was the de-slashifying of the history expansion |
| character); |
| |
| `1' |
| if expansions did take place; |
| |
| `-1' |
| if there was an error in expansion; |
| |
| `2' |
| if the returned line should only be displayed, but not |
| executed, as with the `:p' modifier (*note Modifiers::.). |
| |
| If an error ocurred in expansion, then OUTPUT contains a |
| descriptive error message. |
| |
| - Function: char * history_arg_extract (int first, int last, char |
| *string) |
| Extract a string segment consisting of the FIRST through LAST |
| arguments present in STRING. Arguments are broken up as in Bash. |
| |
| - Function: char * get_history_event (char *string, int *cindex, int |
| qchar) |
| Returns the text of the history event beginning at STRING + |
| *CINDEX. *CINDEX is modified to point to after the event |
| specifier. At function entry, CINDEX points to the index into |
| STRING where the history event specification begins. QCHAR is a |
| character that is allowed to end the event specification in |
| addition to the "normal" terminating characters. |
| |
| - Function: char ** history_tokenize (char *string) |
| Return an array of tokens parsed out of STRING, much as the shell |
| might. The tokens are split on white space and on the characters |
| `()<>;&|$', and shell quoting conventions are obeyed. |
| |
| |
| File: history.info, Node: History Variables, Next: History Programming Example, Prev: History Functions, Up: Programming with GNU History |
| |
| History Variables |
| ================= |
| |
| This section describes the externally visible variables exported by |
| the GNU History Library. |
| |
| - Variable: int history_base |
| The logical offset of the first entry in the history list. |
| |
| - Variable: int history_length |
| The number of entries currently stored in the history list. |
| |
| - Variable: int max_input_history |
| The maximum number of history entries. This must be changed using |
| `stifle_history ()'. |
| |
| - Variable: char history_expansion_char |
| The character that starts a history event. The default is `!'. |
| |
| - Variable: char history_subst_char |
| The character that invokes word substitution if found at the start |
| of a line. The default is `^'. |
| |
| - Variable: char history_comment_char |
| During tokenization, if this character is seen as the first |
| character of a word, then it and all subsequent characters up to a |
| newline are ignored, suppressing history expansion for the |
| remainder of the line. This is disabled by default. |
| |
| - Variable: char * history_no_expand_chars |
| The list of characters which inhibit history expansion if found |
| immediately following HISTORY_EXPANSION_CHAR. The default is |
| whitespace and `='. |
| |
| - Variable: char * history_search_delimiter_chars |
| The list of additional characters which can delimit a history |
| search string, in addition to whitespace, `:' and `?' in the case |
| of a substring search. The default is empty. |
| |
| - Variable: int history_quotes_inhibit_expansion |
| If non-zero, single-quoted words are not scanned for the history |
| expansion character. The default value is 0. |
| |
| - Variable: Function * history_inhibit_expansion_function |
| This should be set to the address of a function that takes two |
| arguments: a `char *' (STRING) and an integer index into that |
| string (I). It should return a non-zero value if the history |
| expansion starting at STRING[I] should not be performed; zero if |
| the expansion should be done. It is intended for use by |
| applications like Bash that use the history expansion character |
| for additional purposes. By default, this variable is set to NULL. |
| |
| |
| File: history.info, Node: History Programming Example, Prev: History Variables, Up: Programming with GNU History |
| |
| History Programming Example |
| =========================== |
| |
| The following program demonstrates simple use of the GNU History |
| Library. |
| |
| main () |
| { |
| char line[1024], *t; |
| int len, done = 0; |
| |
| line[0] = 0; |
| |
| using_history (); |
| while (!done) |
| { |
| printf ("history$ "); |
| fflush (stdout); |
| t = fgets (line, sizeof (line) - 1, stdin); |
| if (t && *t) |
| { |
| len = strlen (t); |
| if (t[len - 1] == '\n') |
| t[len - 1] = '\0'; |
| } |
| |
| if (!t) |
| strcpy (line, "quit"); |
| |
| if (line[0]) |
| { |
| char *expansion; |
| int result; |
| |
| result = history_expand (line, &expansion); |
| if (result) |
| fprintf (stderr, "%s\n", expansion); |
| |
| if (result < 0 || result == 2) |
| { |
| free (expansion); |
| continue; |
| } |
| |
| add_history (expansion); |
| strncpy (line, expansion, sizeof (line) - 1); |
| free (expansion); |
| } |
| |
| if (strcmp (line, "quit") == 0) |
| done = 1; |
| else if (strcmp (line, "save") == 0) |
| write_history ("history_file"); |
| else if (strcmp (line, "read") == 0) |
| read_history ("history_file"); |
| else if (strcmp (line, "list") == 0) |
| { |
| register HIST_ENTRY **the_list; |
| register int i; |
| |
| the_list = history_list (); |
| if (the_list) |
| for (i = 0; the_list[i]; i++) |
| printf ("%d: %s\n", i + history_base, the_list[i]->line); |
| } |
| else if (strncmp (line, "delete", 6) == 0) |
| { |
| int which; |
| if ((sscanf (line + 6, "%d", &which)) == 1) |
| { |
| HIST_ENTRY *entry = remove_history (which); |
| if (!entry) |
| fprintf (stderr, "No such entry %d\n", which); |
| else |
| { |
| free (entry->line); |
| free (entry); |
| } |
| } |
| else |
| { |
| fprintf (stderr, "non-numeric arg given to `delete'\n"); |
| } |
| } |
| } |
| } |
| |
| |
| File: history.info, Node: Concept Index, Next: Function and Variable Index, Prev: Programming with GNU History, Up: Top |
| |
| Concept Index |
| ************* |
| |
| * Menu: |
| |
| * anchored search: Searching the History List. |
| * event designators: Event Designators. |
| * history events: Event Designators. |
| * history expansion: History Interaction. |
| * History Searching: Searching the History List. |
| |
| |
| File: history.info, Node: Function and Variable Index, Prev: Concept Index, Up: Top |
| |
| Function and Variable Index |
| *************************** |
| |
| * Menu: |
| |
| * add_history: History List Management. |
| * append_history: Managing the History File. |
| * clear_history: History List Management. |
| * current_history: Information About the History List. |
| * get_history_event: History Expansion. |
| * history_arg_extract: History Expansion. |
| * history_base: History Variables. |
| * history_comment_char: History Variables. |
| * history_expand: History Expansion. |
| * history_expansion_char: History Variables. |
| * history_get: Information About the History List. |
| * history_get_history_state: Initializing History and State Management. |
| * history_inhibit_expansion_function: History Variables. |
| * history_is_stifled: History List Management. |
| * history_length: History Variables. |
| * history_list: Information About the History List. |
| * history_no_expand_chars: History Variables. |
| * history_quotes_inhibit_expansion: History Variables. |
| * history_search: Searching the History List. |
| * history_search_delimiter_chars: History Variables. |
| * history_search_pos: Searching the History List. |
| * history_search_prefix: Searching the History List. |
| * history_set_history_state: Initializing History and State Management. |
| * history_set_pos: Moving Around the History List. |
| * history_subst_char: History Variables. |
| * history_tokenize: History Expansion. |
| * history_total_bytes: Information About the History List. |
| * history_truncate_file: Managing the History File. |
| * max_input_history: History Variables. |
| * next_history: Moving Around the History List. |
| * previous_history: Moving Around the History List. |
| * read_history: Managing the History File. |
| * read_history_range: Managing the History File. |
| * remove_history: History List Management. |
| * replace_history_entry: History List Management. |
| * stifle_history: History List Management. |
| * unstifle_history: History List Management. |
| * using_history: Initializing History and State Management. |
| * where_history: Information About the History List. |
| * write_history: Managing the History File. |
| |
| |
| |
| Tag Table: |
| Node: Top1162 |
| Node: Using History Interactively1742 |
| Node: History Interaction2250 |
| Node: Event Designators3669 |
| Node: Word Designators4596 |
| Node: Modifiers5845 |
| Node: Programming with GNU History6983 |
| Node: Introduction to History7709 |
| Node: History Storage9030 |
| Node: History Functions10123 |
| Node: Initializing History and State Management11094 |
| Node: History List Management11886 |
| Node: Information About the History List13407 |
| Node: Moving Around the History List14713 |
| Node: Searching the History List15598 |
| Node: Managing the History File17430 |
| Node: History Expansion18936 |
| Node: History Variables20780 |
| Node: History Programming Example23098 |
| Node: Concept Index25702 |
| Node: Function and Variable Index26188 |
| |
| End Tag Table |
