| 2003-02-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.c (frame_unwind_register): New function. |
| (frame_unwind_unsigned_register): Use. |
| (frame_unwind_signed_register): Use. |
| (frame_read_register): New function. |
| * frame.h (frame_unwind_register): Declare. |
| (frame_read_register): Declare. |
| |
| * d10v-tdep.c (d10v_frame_pop): Rewrite. Use regcache_cooked_write |
| and frame_unwind_register instead of read_memory, write_register |
| and deprecated_write_register_bytes. |
| |
| 2003-02-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.h: Note that namelen can be negative. |
| * frame.c (frame_map_name_to_regnum): When LEN is negative, use |
| NAME's length. |
| |
| * NEWS: Mention that the d10v's `regs' command is deprecated. |
| * d10v-tdep.c (d10v_gdbarch_init): Set print_registers_info. |
| (d10v_print_registers_info): New function. |
| (show_regs): Call d10v_print_registers_info. |
| (_initialize_d10v_tdep): Mark "show regs" command as deprecated. |
| |
| 2003-02-02 Mark Kettenis <kettenis@gnu.org> |
| |
| * stack.c (print_frame_info): Restore call to annotate_frame_begin |
| lost in the previous patch. |
| |
| 2003-02-01 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2002-11-09 Jason Molenda (jason-cl@molenda.com) |
| * stack.c (print_frame_info_base): Output complete FRAME tuple |
| for synthesized frames. |
| |
| 2003-02-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * mips-nat.c (zerobuf): Delete. |
| (fetch_inferior_registers): Alloc local zerobuf. |
| (fetch_core_registers): Alloc local zerobuf. |
| * d10v-tdep.c (show_regs): Don't allocate a dynamic array using |
| MAX_REGISTER_RAW_SIZE or MAX_REGISTER_VIRTUAL_SIZE. |
| * thread-db.c (thread_db_store_registers): Ditto. |
| * sh-tdep.c (sh_do_register): Ditto. |
| * rom68k-rom.c (rom68k_supply_one_register): Ditto. |
| * remote-sim.c (gdbsim_store_register): Ditto. |
| * remote-mips.c (mips_wait, mips_fetch_registers): Ditto. |
| * remote-e7000.c (fetch_regs_from_dump): Ditto. |
| * monitor.c (monitor_supply_register): Ditto. |
| * mipsv4-nat.c (supply_gregset, supply_fpregset): Ditto. |
| * mips-nat.c (fetch_inferior_registers): Ditto. |
| * m68klinux-nat.c (fetch_register): Ditto. |
| * lynx-nat.c (fetch_inferior_registers): Ditto. |
| (fetch_inferior_registers): Ditto. |
| * irix4-nat.c (supply_gregset, supply_fpregset): Ditto. |
| * hpux-thread.c (hpux_thread_fetch_registers): Ditto. |
| (hpux_thread_store_registers): Ditto. |
| * hppah-nat.c (fetch_register): Ditto. |
| * hppab-nat.c (fetch_register): Ditto. |
| * hppa-tdep.c (pa_register_look_aside): Ditto. |
| (pa_print_fp_reg, pa_strcat_fp_reg): Ditto. |
| * dve3900-rom.c (fetch_bitmapped_register): Ditto. |
| |
| 2003-02-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh: Explictly specify all method levels. When a |
| variable with an empty level, provide a non-multi-arch default. |
| (BELIEVE_PCC_PROMOTION_TYPE): Set level to empty. |
| * gdbarch.h: Re-generate. |
| * stabsread.c (BELIEVE_PCC_PROMOTION_TYPE): Delete. Always defined. |
| * config/m68k/tm-sun3.h (BELIEVE_PCC_PROMOTION_TYPE): Define as 1 |
| |
| 2003-02-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * defs.h (host_pointer_to_address): Delete declaration. |
| (address_to_host_pointer): Delete declaration. |
| * utils.c (host_pointer_to_address): Delete function. |
| (address_to_host_pointer): Delete function. |
| * procfs.c (procfs_address_to_host_pointer): New function. |
| * procfs.c (proc_set_watchpoint): Use. |
| (procfs_can_use_hw_breakpoint): Update comments. |
| * somsolib.c (hpux_address_to_host_pointer_hack): New function. |
| (som_solib_add): Use. |
| * hppa-tdep.c (hppa_pointer_to_address_hack): New function. |
| * hppa-tdep.c (unwind_command): Use. |
| |
| 2003-02-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdb_dirent.h: Mark up valid uses of <dirent.h>, d_namelen and |
| strlen d_name. |
| |
| * main.c (captured_main): Delete #ifdef ADDITIONAL_OPTIONS, |
| ADDITIONAL_OPTION_CASES, and ADDITIONAL_OPTION_HANDLER code. |
| (print_gdb_help): Delete #ifdef ADDITIONAL_OPTION_HELP code. |
| * stabsread.c (DBX_PARM_SYMBOL_CLASS): Delete macro. |
| (define_symbol): Update. |
| * symfile.c (generic_load): Remove references to nindy. |
| * symtab.c: Remove references to nindy. |
| |
| 2003-02-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * infcmd.c (print_float_info): Delete code conditional on |
| FLOAT_INFO. |
| * config/nm-lynx.h: Delete #undef FLOAT_INFO. Update copyright. |
| * config/m68k/nm-apollo68b.h: Ditto. |
| * config/i386/tm-ptx.h (FLOAT_INFO): Delete. Update copyright. |
| * config/ns32k/nm-nbsd.h (FLOAT_INFO): Ditto. |
| * config/i386/tm-symmetry.h (FLOAT_INFO): Ditto. |
| |
| 2003-02-01 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/i386/tm-i386os9k.h: Removed. |
| |
| * configure.host (i[3456]86-*-isc*): Set gdb_host to i386v. |
| Remove i[3456]86-*-sysv3.2* and i[3456]86-*-sysv32* entries since |
| they're identical to i[3456]86-*-sysv* now. |
| * config/i386/i386v32.mh: Removed. |
| * config/i386/xm-i386v32.h: Removed. |
| * config/i386/xm-i386sco.h (U_FPSTATE): Remove macro. |
| |
| * config/i386/i386mk.mt, config/i386/i386mk.mh: Removed. |
| |
| * config/i386/i386dgux.mh: Removed. |
| * configure.host (i[3456]86-*-dgux): Set gdb_host to i386v4. |
| |
| * configure.in: Fix typo. |
| * configure: Regenerated. |
| |
| 2003-01-31 David Carlton <carlton@math.stanford.edu> |
| |
| * dwarf2read.c (dwarf2_locate_sections): Set |
| dwarf_ranges_section. |
| |
| 2003-01-31 Andrew Cagney <ac131313@redhat.com> |
| |
| * objc-exp.y, c-exp.y, f-exp.y: Remove PTR casts. |
| * utils.c: Update comments documenting legitimate uses of PTR. |
| |
| * utils.c: Re-indent. |
| |
| * config/djgpp/fnchange.lst: Delete nindy files. |
| * nindy-share/ttyflush.c, nindy-share/stop.h: Delete files. |
| * nindy-share/nindy.c, nindy-share/env.h: Delete files. |
| * nindy-share/coff.h, nindy-share/block_io.h: Delete files. |
| * nindy-share/b.out.h, nindy-share/VERSION: Delete files. |
| * nindy-share/README, nindy-share/Onindy.c: Delete files. |
| * nindy-tdep.c, nindy-share/Makefile: Delete files. |
| * Makefile.in (init.c): Remove nindy references. |
| (saber_gdb): Delete rule. |
| (ALLDEPFILES): Delete hp300ux-nat.c, nindy-tdep.c, |
| nindy-share/Onindy.c, nindy-share/nindy.c, nindy-share/ttyflush.c, |
| and a68v-nat.c. |
| (hp300ux-nat.o, a68v-nat.o, ptx4-nat.o): Delete rules. |
| (Onindy.o, nindy.o, ttyflush.o, nindy-tdep.o): Delete rules. |
| (HFILES_NO_SRCDIR): Delete nindy-share/b.out.h, |
| nindy-share/block_io.h, nindy-share/coff.h, nindy-share/env.h, and |
| nindy-share/stop.h. |
| * hp300ux-nat.c, a68v-nat.c, ptx4-nat.c: Delete files. |
| * saber.suppress: Delete file. |
| |
| 2003-01-31 Daniel Jacobowitz <drow@mvista.com> |
| |
| * dbxread.c (stabs_data): New static variable. |
| (fill_symbuf): Support an in-memory buffer for stabs data. |
| (stabs_seek): New function. |
| (dbx_psymtab_to_symtab): Relocate the stabs data if necessary. |
| (read_ofile_symtab): Use stabs_seek. |
| (elfstab_build_psymtabs): Take an asection* instead of |
| an offset and size. Relocate the stabs data if necessary. |
| Save the section* for dbx_psymtab_to_symtab. |
| * dwarf2read.c: Add section variables for each debug section. |
| (dwarf2_locate_sections): Fill them in. |
| (dwarf2_read_section): Take an asection* argument. |
| Relocate the section contents if necessary. |
| (dwarf2_build_psymtabs, dwarf2_build_psymtabs_easy): Update callers. |
| * dwarf2cfi.c (parse_frame_info): Take a section argument and pass |
| it to dwarf2_read_section. |
| (dwarf2_build_frame_info): Update callers. |
| * elfread.c (elf_symfile_read): Update call to |
| elfstab_build_psymtabs. |
| * gdb-stabs.h (struct dbx_symfile_info): Add stab_section. |
| (DBX_STAB_SECTION): New macro. |
| * stabsread.h (elfstab_build_psymtabs): Update prototype. |
| * symfile.c (symfile_dummy_outputs): New function. |
| (symfile_relocate_debug_section): New function. |
| * symfile.h (symfile_relocate_debug_section): Add prototype. |
| |
| 2003-01-31 Richard Henderson <rth@redhat.com> |
| |
| * alpha-nat.c (REGISTER_PTRACE_ADDR): Merge into ... |
| (register_addr): ... here. Support ALPHA_UNIQUE_REGNUM. |
| (fetch_elf_core_registers): Support ALPHA_UNIQUE_REGNUM. |
| * alpha-tdep.c (alpha_register_name): Add "unique". |
| * alpha-tdep.h (ALPHA_NUM_REGS): Increment. |
| (ALPHA_UNIQUE_REGNUM): New. |
| * config/alpha/nm-linux.h (ALPHA_UNIQUE_PTRACE_ADDR): New. |
| |
| 2003-01-31 Andrew Cagney <ac131313@redhat.com> |
| |
| * README: Remove reference to Ericsson 1800 monitor. |
| * Makefile.in (remote-es.o): Delete rule. |
| (ALLDEPFILES): Delete remote-es.c. |
| * remote-es.c: Delete file. |
| * config/m68k/es1800.mt: Delete file. |
| * config/djgpp/fnchange.lst: Update. |
| * configure.tgt: Delete m68*-ericsson-* target. |
| |
| 2003-01-31 Adam Fedor <fedor@gnu.org> |
| |
| * infrun.c (handle_inferior_event): Rename 'tmp' to real_stop_pc. |
| Remove duplicate/shadowing variable of same name. |
| |
| 2003-01-30 Jim Blandy <jimb@redhat.com> |
| |
| * symfile.c (find_separate_debug_file): Assert that the objfile's |
| directory name we compute ends with a slash, and then assume that |
| that's so everywhere we use it. |
| |
| 2003-01-30 Daniel Jacobowitz <drow@mvista.com> |
| |
| * valops.c (value_assign): Flush frame cache after stores to memory |
| also. |
| |
| 2003-01-30 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (mon960-rom.o): Delete rule. |
| * mon960-rom.c: Delete file. |
| |
| 2003-01-30 Andrew Cagney <ac131313@redhat.com> |
| |
| * d10v-tdep.c: Include "frame-unwind.h". |
| (d10v_gdbarch_init): Append d10v_frame_p to the unwind predicate |
| list. |
| (next_addr, uses_frame): Delete. |
| (struct d10v_unwind_cache): Define. |
| (prologue_find_regs): Add struct d10v_unwind_cache info parameter. |
| Use info instead of next_addr and uses_frame globals. |
| (d10v_frame_init_saved_regs): Delete function. |
| (d10v_init_extra_frame_info): Delete function. |
| (d10v_gdbarch_init): Do not initialize init_extra_frame_info, |
| frame_init_saved_regs or pop_frame, frame_chain, frame_chain_valid, |
| init_frame_pc or frame_saved_pc. |
| (d10v_pop_frame): Delete function. |
| (do_d10v_pop_frame): Delete function. |
| (d10v_frame_chain): Delete function. |
| (d10v_frame_chain_valid): Delete function. |
| (d10v_frame_pc_unwind): New function. |
| (d10v_frame_id_unwind): New function. |
| (saved_regs_unwinder): New function. |
| (d10v_frame_register_unwind): New function. |
| (d10v_frame_pop): New function. |
| (d10v_frame_unwind): New variable. |
| (d10v_frame_p): New function. |
| (d10v_frame_saved_pc): Delete function. |
| * Makefile.in (d10v-tdep.o): Update dependencies. |
| |
| 2003-01-30 J. Brobecker <brobecker@gnat.com> |
| |
| * config/pa/tm-hppa64.h (CALL_DUMMY_LOCATION): Remove #undef |
| causing some regressions due to a change in the default value |
| for this macro. |
| |
| 2003-01-29 Richard Henderson <rth@redhat.com> |
| Elena Zannoni <ezannoni@redhat.com> |
| Daniel Jacobowitz <drow@mvista.com> |
| |
| Fix PR gdb/961. |
| * dwarf2read.c (dwarf_ranges_offset, dwarf_ranges_size): New |
| variables. |
| (RANGES_SECTION): New. |
| (dwarf_ranges_buffer): New variable. |
| (struct comp_unit_head): Add member "die". |
| (struct dwarf2_pinfo): Add dwarf_ranges_buffer, dwarf_ranges_size. |
| (DWARF_RANGES_BUFFER, DWARF_RANGES_SIZE): New. |
| (dwarf2_has_info): Init dwarf_ranges_offset and dwarf_ranges_size. |
| (dwarf2_locate_sections): Likewise. |
| (dwarf2_build_psymtabs): Read .debug_ranges. |
| (dwarf2_build_psymtabs_hard): Swap dwarf_ranges out. |
| (psymtab_to_symtab_1): Swap dwarf_ranges in. Set cu_header.die. |
| (dwarf2_get_pc_bounds): New cu_header argument; adjust all callers. |
| Look for DW_AT_ranges and return the bounding box. |
| |
| 2003-01-29 Brian Ford <ford@vss.fsi.com> |
| |
| * win32-nat.c (cygwin_pid): Removed as unused. |
| (child_attach): Try fall back to Cygwin pid. |
| |
| 2003-01-29 Jim Blandy <jimb@redhat.com> |
| |
| * objfiles.h (struct objfile): Doc fix. |
| |
| 2003-01-29 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.c (frame_saved_regs_id_unwind): Assert FRAME_CHAIN_P. |
| (legacy_get_prev_frame): Assert FRAME_CHAIN_P. |
| (get_prev_frame): When FRAME_CHAIN_P, call legacy_get_prev_frame. |
| (frame_saved_regs_pc_unwind): Assert FRAME_SAVED_PC_P. |
| * gdbarch.sh (FRAME_CHAIN): Change to a function with predicate. |
| (FRAME_SAVED_PC): Change to a function with predicate. |
| * gdbarch.h, gdbarch.c: Re-generate. |
| |
| 2003-01-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * hppah-nat.c (child_pid_to_exec_file): Don't use boolean. |
| |
| * complaints.c (complain): Delete function. |
| * complaints.h (struct deprecated_complaint): Delete definition. |
| (complain): Delete declaration. |
| |
| 2003-01-28 Kevin Buettner <kevinb@redhat.com> |
| |
| * mips-tdep.c (mips_init_extra_frame_info): Return early for |
| dummy frames. |
| |
| 2003-01-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * sentinel-frame.h, sentinel-frame.c: New files. |
| * Makefile.in (frame.o): Update dependencies. |
| (SFILES): Add sentinel-frame.c. |
| (sentinel_frame_h): Define. |
| (COMMON_OBS): Add sentinel-frame.o. |
| (sentinel-frame.o): Specify dependencies. |
| * frame.c: Include "sentinel-frame.h". |
| (frame_register_unwind): Rewrite assuming that there is always a a |
| ->next frame. |
| (frame_register, generic_unwind_get_saved_register): Ditto. |
| (frame_read_unsigned_register, frame_read_signed_register): Ditto. |
| (create_sentinel_frame, unwind_to_current_frame): New functions. |
| (get_current_frame): Rewrite using create_sentinel_frame and |
| unwind_to_current_frame. When possible, always create a frame. |
| (create_new_frame): Set next to the sentinel frame. |
| (get_next_frame): Rewrite. Don't go below the level 0 frame. |
| (deprecated_update_frame_pc_hack): Update the next frame's PC and |
| ID cache when necessary. |
| (frame_saved_regs_id_unwind): Use frame_relative_level. |
| (deprecated_generic_get_saved_register): Use frame_relative_level, |
| get_frame_saved_regs, get_frame_pc, get_frame_base and |
| get_next_frame. |
| (frame_saved_regs_register_unwind): Use get_frame_saved_regs and |
| frame_register. |
| |
| 2003-01-27 Daniel Jacobowitz <drow@mvista.com> |
| |
| * gdb_indent.sh: Add -T bfd and -T asection to the indent arguments. |
| |
| 2003-01-27 Daniel Jacobowitz <drow@mvista.com> |
| |
| * maint.c [! (HAVE_MONSTARTUP && HAVE__MCLEANUP)] |
| (maintenance_set_profile_cmd): Use error () instead of warning (). |
| |
| 2003-01-27 Daniel Jacobowitz <drow@mvista.com> |
| |
| * configure.in: Check that -pg works if using --enable-profiling. |
| Check for monstartup and _mcleanup regardless of --enable-profiling. |
| * maint.c: Check for monstartup and _mcleanup before using them. |
| * config.in: Regenerated. |
| * configure: Regenerated. |
| |
| 2003-01-23 Jim Blandy <jimb@redhat.com> |
| |
| * symfile.c (syms_from_objfile): Don't print the "(no debugging |
| symbols found)" message here; we haven't checked for a separate |
| debug info file yet, so we don't know yet. |
| (symbol_file_add_with_addrs_or_offsets): Print it here, after |
| we've looked everywhere. Also, there's no need to print a special |
| message when we're loading the separate debug info file: the one |
| symbol_file_add prints is fine. |
| |
| 2003-01-23 Alexander Larsson <alexl@redhat.com> |
| Jim Blandy <jimb@redhat.com> |
| |
| Add support for executables whose debug info has been separated |
| out into a separate file, leaving only a link behind. |
| * objfiles.h (struct objfile): New fields: separate_debug_objfile |
| and separate_debug_objfile_backlink. |
| (put_objfile_before): New declaration. |
| * symfile.c: #include "filenames.h". |
| (symbol_file_add_with_addrs_or_offsets): If this objfile has its |
| debug info in a separate file, read that, too. Save the addrs |
| argument, so we can use it again to read the separated debug info; |
| syms_from_objfile modifies the table we pass it. |
| (reread_symbols): After re-reading an objfile, call |
| reread_separate_symbols to refresh its separate debug info |
| objfile, if it has one. |
| (reread_separate_symbols, find_separate_debug_file, |
| get_debug_link_info, separate_debug_file_exists): New functions. |
| (debug_file_directory): New global var. |
| (_initialize_symfile): Initialize debug_file_directory, and |
| provide the new `set debug-file-directory' command to let the user |
| change it. |
| * objfiles.c (free_objfile): If this objfile has its debug info in |
| a separate objfile, free that one too. If this is itself a |
| separate debug info objfile, clear our parent's backlink. |
| (put_objfile_before): New function. |
| * utils.c (gnu_debuglink_crc32): New function. |
| * defs.h (gnu_debuglink_crc32): New declaration. |
| * Makefile.in (symfile.o): Note dependency on "filenames.h". |
| * configure.in: Handle --with-separate-debug-dir config option. |
| * acinclude.m4 (AC_DEFINE_DIR): New macro. |
| * acconfig.h (DEBUGDIR): New macro. |
| * configure, aclocal.m4, config.in: Regenerated. |
| |
| 2003-01-22 Jim Blandy <jimb@redhat.com> |
| |
| * symfile.c (symbol_file_add_with_addrs_or_offsets): New function, |
| like the old symbol_file_add, but taking new arguments: you can |
| now pass in either a `struct section_addr_info' list to say where |
| each section is loaded, or a `struct section_offsets' table. Pass |
| these new arguments through to syms_from_objfile as appropriate. |
| (symbol_file_add): Just call symbol_file_add_with_addrs_or_offsets, |
| with the appropriate quiescent values for the new arguments. |
| |
| * symfile.c: #include "gdb_assert.h". |
| (syms_from_objfile): Add the ability to pass in a section offset |
| table directly, as an alternative to the section_addr_info table. |
| Document arguments better. |
| (symbol_file_add): Pass extra arguments to syms_from_objfile. |
| * symfile.h (syms_from_objfile): Update declaration. |
| * rs6000-nat.c (objfile_symbol_add): Pass new arguments to |
| syms_from_objfile. |
| * Makefile.in (symfile.o): List dependency on $(gdb_assert_h). |
| |
| 2003-01-22 Daniel Jacobowitz <drow@mvista.com> |
| |
| Original patch by Tom Tromey <tromey@cygnus.com> and |
| Jason Molenda <jmolenda@apple.com>. |
| * Makefile.in (PROFILE_CFLAGS): Substitute from configure. |
| (INTERNAL_LDFLAGS): Don't include PROFILE_CFLAGS. |
| * NEWS: Mention profiling. |
| * configure.in (--enable-gdbtk): Fix typo. |
| (--enable-profiling): New. Set PROFILE_CFLAGS. |
| * maint.c (maintenance_set_profile_cmd): Remove NOTYET. |
| Fill in function. |
| (profiling_state): New variable. |
| (mcleanup_wrapper): New function. |
| (_initialize_maint): Remove NOTYET, fix call to |
| add_setshow_boolean_cmd for "maint set profile". |
| * configure: Regenerated. |
| |
| 2003-01-21 Martin M. Hunt <hunt@redhat.com> |
| |
| * Makefile.in (install-gdbtk): Install PNG images too. |
| |
| 2003-01-21 Andrew Cagney <ac131313@redhat.com> |
| |
| * exec.c (text_start): Delete global variable. |
| (exec_file_attach): Make text_start local to the function. |
| * inferior.h (BEFORE_TEXT_END, AFTER_TEXT_END): Delete macros. |
| * valops.c (hand_function_call): Delete code that handles |
| BEFORE_TEXT_END and AFTER_TEXT_END. |
| * gdbarch.sh (CALL_DUMMY_LENGTH): Test call_dummy_length instead |
| of CALL_DUMMY_LOCATION. |
| * gdbarch.c: Regenerate. |
| * inferior.h (deprecated_pc_in_call_dummy_before_text_end) |
| (deprecated_pc_in_call_dummy_after_text_end): Delete declaration. |
| * blockframe.c (deprecated_pc_in_call_dummy_before_text_end) |
| (deprecated_pc_in_call_dummy_after_text_end): Delete functions. |
| (text_end): Delete extern declaration. |
| |
| 2003-01-21 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.h (FRAME_OBSTACK_ZALLOC): Define. |
| * blockframe.c (backtrace_below_main): Move to "frame.c". |
| (frame_chain_valid): Delete check for backtrace_below_main. |
| (_initialize_blockframe): Delete initialization, move ``set |
| backtrace-below-main'' command to "frame.c". |
| (do_flush_frames_sfunc): Delete function. |
| * frame.c: Include "command.h" and "gdbcmd.h". |
| (frame_type_from_pc): New function. |
| (create_new_frame): Use frame_type_from_pc. |
| (legacy_get_prev_frame): New function. |
| (get_prev_frame): Rewrite. When an old style frame, call |
| legacy_get_prev_frame. Otherwize, unwind the PC first. |
| (_initialize_frame): Add ``set backtrace-below-main'' command. |
| * Makefile.in (frame.o): Update dependencies. |
| |
| 2003-01-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/pa/tm-hppa.h (DEPRECATED_DO_REGISTERS_INFO): Rename |
| DEPRECATED_REGISTERS_INFO. |
| |
| 2003-01-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Replace `Blanket Write Privs' with `Global |
| Maintainers'. Update `Various Maintainers'. |
| |
| 2003-01-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.c (frame_saved_regs_pop): Assert POP_FRAME_P. |
| * gdbarch.sh (POP_FRAME): Change to function with predicate. |
| Suppress actual parameters when `-'. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| |
| 2003-01-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * d10v-tdep.c (d10v_frame_saved_pc, d10v_frame_chain): Restore |
| code handling dummy frames. |
| |
| 2003-01-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame-unwind.h (frame_unwind_pop_ftype): Declare. |
| (struct frame_unwind): Add field pop. |
| * frame.h (frame_pop): Declare. |
| * frame.c (frame_saved_regs_pop): New function. |
| (trad_frame_unwinder): Add frame_saved_regs_pop. |
| (frame_pop): New function. |
| * dummy-frame.c (dummy_frame_pop): New function. |
| (discard_innermost_dummy): New function. |
| (generic_pop_dummy_frame): Use discard_innermost_dummy. |
| (dummy_frame_unwind): Add dummy_frame_pop. |
| * infrun.c (normal_stop): Call frame_pop instead of POP_FRAME. |
| * valops.c (hand_function_call): Ditto. |
| * stack.c (return_command): Ditto. |
| |
| 2003-01-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * cris-tdep.c: Fix function declaration indentation. |
| * dwarfread.c, gdbcore.h, gdbtypes.h, i386v-nat.c: Ditto. |
| * mips-tdep.c, monitor.h, parse.c, proc-utils.h: Ditto. |
| * rs6000-nat.c, ser-go32.c, somread.c, stabsread.c: Ditto. |
| * symfile.h, symtab.h, target.c, target.h, value.h: Ditto. |
| * xcoffread.c, config/pa/tm-hppa.h: Ditto. |
| * config/sparc/tm-sp64.h, config/sparc/tm-sparc.h: Ditto. |
| |
| 2003-01-18 Michael Chastain <mec@shout.net> |
| |
| * README (Unpacking and Installation -- quick overview): |
| Warn against ".../gdb-5.3/gdb/configure". |
| |
| 2003-01-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * dummy-frame.h (dummy_frame_id_unwind): Delete declaration. |
| (dummy_frame_pc_unwind, dummy_frame_register_unwind): Ditto. |
| (struct frame_unwind): Declare opaque. |
| (dummy_frame_p): Declare function. |
| * dummy-frame.c (dummy_frame_id_unwind): Make static. |
| (dummy_frame_pc_unwind, dummy_frame_register_unwind): Ditto. |
| * dummy-frame.c: Include "frame-unwind.h". |
| (dummy_frame_p): New function. |
| (dummy_frame_unwind): New variable. |
| * frame.c: Include "frame-unwind.h". |
| (frame_pc_unwind, frame_id_unwind, frame_register_unwind): Update |
| to use the new unwind field. |
| (set_unwind_by_pc): Delete function. |
| (create_new_frame, get_prev_frame): Set unwind field using |
| frame_unwind_find_by_pc. |
| (trad_frame_unwind, trad_frame_unwinder): New variables. |
| * frame.h (trad_frame_unwind): Declare variable. |
| (frame_id_unwind_ftype): Delete declaration. |
| (frame_pc_unwind_ftype, frame_register_unwind_ftype): Ditto. |
| (struct frame_unwind): Declare opaque. |
| (struct frame_info): Replace the fields id_unwind, pc_unwind and |
| register_unwind with a single unwind pointer. |
| * frame-unwind.h, frame-unwind.c: New files. |
| * Makefile.in (SFILES): Add frame-unwind.c. |
| (frame_unwind_h): Define. |
| (COMMON_OBS): Add frame-unwind.o. |
| (frame-unwind.o): Specify dependencies. |
| (frame.o, dummy-frame.o): Update dependencies. |
| |
| 2003-01-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * ada-valprint.c: Eliminate PTR. |
| * breakpoint.c, corelow.c, cris-tdep.c, dbxread.c: Ditto. |
| * defs.h, dve3900-rom.c, dwarf2read.c, dwarfread.c: Ditto. |
| * exec.c, hppa-tdep.c, hpread.c, infcmd.c, mdebugread.c: Ditto. |
| * objfiles.c, objfiles.h, ocd.c, remote-es.c: Ditto. |
| * remote-mips.c, remote-sds.c, remote-vx.c: Ditto. |
| * solib-svr4.c, solib.c, stack.c, symfile.c, symfile.h: Ditto. |
| * symmisc.c, v850ice.c, xcoffread.c, cli/cli-script.c: Ditto. |
| |
| 2003-01-17 Andrew Cagney <ac131313@redhat.com> |
| |
| * main.c (captured_main): Don't use PTR. |
| * cp-valprint.c (cp_print_class_method): Replace STREQ with strcmp. |
| * gdbtypes.c (lookup_primitive_typename): Ditto. |
| (lookup_struct_elt_type): Ditto. |
| * f-valprint.c (info_common_command): Ditto. |
| (list_all_visible_commons): Ditto. |
| * jv-typeprint.c (java_type_print_base): Ditto. |
| |
| * config/djgpp/fnchange.lst: Rename mi1-var-block.exp, |
| mi1-var-child.exp, mi1-var-cmd.exp and mi1-var-display.exp. |
| Rename opcodes/iq2000-desc.c and opcodes/iq2000-dis.c. Rename |
| i386-interix-nat.c and i386-interix-tdep.c. Rename |
| m68klinux-nat.c and m68klinux-tdep.c. Rename |
| config/mips/tm-linux.h and config/mips/tm-linux64.h. Rename |
| bfd/po/.cvsignore and opcodes/po/.cvsignore. Rename |
| gdb/objc-exp.tab.c and gdb/ada-exp.tab.c |
| * main.c (captured_main): Use xfree, not free. |
| |
| 2003-01-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.h (frame_id_unwind_ftype): Change type so that the frame's |
| ID back using a parameter. |
| * frame.c (frame_id_unwind): Update call. |
| (frame_saved_regs_id_unwind): Update. |
| * dummy-frame.c (dummy_frame_id_unwind): Update function. |
| * dummy-frame.h (struct frame_id): Add opaque declaration. |
| (dummy_frame_id_unwind): Update declaration. |
| |
| 2003-01-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * sparc-tdep.c: Delete reference to PRINT_REGISTER_HOOK. |
| |
| 2003-01-15 Stephen P. Smith <ischis2@cox.net> |
| |
| * MAINTAINERS (Stephen P. Smith): Updated email address. |
| |
| 2003-01-14 Elena Zannoni <ezannoni@redhat.com> |
| |
| * breakpoint.c (until_break_command): Add new argument. Use it to |
| decide whether to stop only at the current frame or not. |
| * breakpoint.h (until_break_command): Update prototype. |
| * infcmd.c (until_command): Add new argument to until_break_command |
| call. |
| (advance_command): New function. |
| (_initialize_infcmd): Update help string for 'until' command. |
| Add new 'advance' command. |
| |
| 2003-01-14 David Carlton <carlton@math.stanford.edu> |
| |
| * linespec.c (decode_line_1): Normalize comments. |
| (set_flags): Ditto. |
| (locate_first_half): Ditto. |
| (decode_compound): Ditto. |
| (symtab_from_filename): Ditto. |
| (decode_all_digits): Ditto. |
| (decode_dollar): Ditto. |
| (find_methods): Ditto. |
| (find_toplevel_char): Ditto. |
| |
| 2003-01-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * ax-gdb.c, c-valprint.c, charset.c, corefile.c: Update copyright. |
| * demangle.c, disasm.c, dwarf2cfi.c, dwarfread.c: Update copyright. |
| * elfread.c, eval.c, expprint.c, expression.h: Update copyright. |
| * f-typeprint.c, findvar.c, gcore.c, gdb_mbuild.sh: Update copyright. |
| * gdbtypes.h, gnu-v2-abi.c, inferior.h, inftarg.c: Update copyright. |
| * language.c, language.h, m32r-tdep.c: Update copyright. |
| * mn10200-tdep.c, scm-lang.c, scm-lang.h: Update copyright. |
| * somsolib.c, somsolib.h, symfile.c, symtab.h: Update copyright. |
| * thread-db.c, typeprint.c, utils.c, valarith.c: Update copyright. |
| * values.c, win32-nat.c, x86-64-linux-nat.c: Update copyright. |
| * x86-64-linux-tdep.c, z8k-tdep.c: Update copyright. |
| * cli/cli-decode.h, config/h8500/tm-h8500.h: Update copyright. |
| |
| 2003-01-13 Elena Zannoni <ezannoni@redhat.com> |
| |
| * stabsread.h (process_later, resolve_cfront_continuation): |
| Obsolete. |
| Update copyright years. |
| * buildsym.c (start_subfile): Obsolete comment pertinent to Cfront. |
| Update copyright year. |
| * dbxread.c(struct cont_elem): Obsolete. |
| (process_later, process_now): Obsolete functions. |
| (read_dbx_symtab, read_ofile_symtab): Obsolete cfront support. |
| Update copyright year. |
| * gdbtypes.c (INIT_EXTRA, ADD_EXTRA): Obsolete macros. |
| (add_name, add_mangled_type, cfront_mangle_name): Obsolete functions. |
| * mdebugread.c (parse_type): Obsolete comment pertinent to Cfront. |
| (parse_partial_symbols): Obsolete cfront support. |
| * stabsread.c |
| (CFRONT_VISIBILITY_PRIVATE,CFRONT_VISIBILITY_PUBLIC): Obsolete |
| macros. |
| (get_substring, get_cfront_method_physname, msg_unknown_complaint, |
| read_cfront_baseclasses, read_cfront_member_functions, |
| resolve_cfront_continuation,read_cfront_static_fields, |
| copy_cfront_struct_fields): Obsolete functions. |
| (define_symbol, read_one_struct_field): Obsolete cfront support. |
| * xcoffread.c (scan_xcoff_symtab): Obsolete CFront support. |
| Update Copyright year. |
| |
| 2003-01-13 Elena Zannoni <ezannoni@redhat.com> |
| |
| * stack.c (print_frame_info, print_stack_frame_base_stub, |
| print_stack_frame_base, show_and_print_stack_frame_stub, |
| show_and_print_stack_frame, print_only_stack_frame_stub, |
| print_only_stack_frame): Delete functions. |
| (print_stack_frame_stub): Call print_frame_info instead of |
| print_frame_info_base. |
| (print_frame_info_base): Rename to print_frame_info. |
| (backtrace_command_1): Call print_frame_info, instead of |
| print_frame_info_base. |
| (current_frame_command): Call print_stack_frame, instead of |
| print_only_stack_frame. |
| (frame_command): Call print_stack_frame, instead of |
| show_and_print_stack_frame. |
| (up_command): Ditto. |
| (down_command): Ditto. |
| * frame.h (print_only_stack_frame): Delete prototype. |
| * infrun.c (normal_stop): Call print_stack_frame, instead of |
| show_and_print_stack_frame. |
| * thread.c (info_threads_command): Call print_stack_frame, instead |
| of print_only_stack_frame. |
| |
| 2003-01-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * README (Graphical interface to GDB): Update URL. Point at |
| gdb/links/. |
| |
| * gdb_indent.sh: Update to version 2.2.9. Warn when not exact |
| version match. |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| * symtab.c (find_pc_sect_line): Don't consider end-of-function |
| lines. |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| * thread-db.c (attach_thread): Prototype. |
| (struct private_thread_info): Remove lwpid. Add thread handle (th), |
| thread information (ti), and valid flags (th_valid, ti_valid). |
| (attach_thread): Move target_pid_to_str call to after the thread |
| is added to GDB's list. Initialize the cache. |
| (thread_get_info_callback, thread_db_map_id2thr) |
| (thread_db_get_info): New functions. |
| (thread_from_lwp, lwp_from_thread, thread_db_fetch_registers) |
| (thread_db_store_registers, thread_db_thread_alive) |
| (thread_db_get_thread_local_address): Use them. |
| (thread_db_pid_to_str): Likewise. Return "Missing" instead |
| of calling error() for threads in unknown state. |
| |
| (clear_lwpid_callback): New function. |
| (thread_db_resume): Use it to clear the cache. |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| * lin-lwp.c (struct private_thread_info, find_lwp_callback): Remove. |
| (resume_callback): Remove dead code. |
| |
| 2003-01-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh (FRAME_INIT_SAVED_REGS): Change to function with |
| predicate. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * stack.c (frame_info): Only initialize the saved registers when |
| FRAME_INIT_SAVED_REGS_P. |
| * frame.c (frame_saved_regs_register_unwind): Assert |
| FRAME_INIT_SAVED_REGS_P. |
| (deprecated_generic_get_saved_register): Ditto. |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| * source.c (openp): Squelch warning about "filename". |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| * source.c (openp): If the file does not exist don't necessarily |
| search the path. |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| Fix PR gdb/872. |
| * gdbtypes.c (init_type): Mark "char" as TYPE_FLAG_NOSIGN. |
| (integer_types_same_name_p): New function. |
| (rank_one_type): Use it. |
| * stabsread.c (read_range_type): Mark "char" as TYPE_FLAG_NOSIGN. |
| |
| 2003-01-13 Daniel Jacobowitz <drow@mvista.com> |
| |
| * Makefile.in (TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_DEFINE): New |
| variables. |
| (main.o): Custom rule which uses $(TARGET_SYSTEM_ROOT_DEFINE). |
| * configure.in: Add --with-sysroot. |
| * configure: Regenerated. |
| * main.c (gdb_sysroot): New variable. |
| (captured_main): Initialize gdb_sysroot. |
| * defs.h (gdb_sysroot): New extern declaration. |
| * solib.c (_initialize_solib): Initialize solib_absolute_prefix. |
| |
| 2003-01-12 Michael Chastain <mec@shout.net> |
| |
| * config/djgpp/fnchange.lst: add gdb/ChangeLog-2002. |
| |
| 2003-01-12 Michael Chastain <mec@shout.net> |
| |
| * top.c (print_gdb_version): Bump copyright year to 2003. |
| |
| 2003-01-12 David Carlton <carlton@bactrian.org> |
| |
| * linespec.c (symtab_from_filename): Rename variable 's' to |
| 'file_symtab'. |
| |
| 2003-01-12 Andrew Cagney <ac131313@redhat.com> |
| |
| * d10v-tdep.c (d10v_init_extra_frame_info): Remove checks for a |
| dummy frame. |
| (d10v_frame_saved_pc, d10v_frame_chain): Ditto. |
| |
| 2003-01-12 Andrew Cagney <ac131313@redhat.com> |
| |
| * d10v-tdep.c: Include "gdb_assert.h". |
| (d10v_store_return_value): Rewrite to match current interface. |
| (d10v_extract_struct_value_address): Ditto. |
| (d10v_extract_return_value): Ditto. |
| (d10v_gdbarch_init): Set store_restore_value, |
| extract_struct_value_address and extract_return_value. |
| |
| 2003-01-12 J. Brobecker <brobecker@gnat.com> |
| |
| * hpread.c (set_namestring): New procedure replacing the |
| SET_NAMESTRING macro. |
| (hpread_build_psymtabs): Replace calls to SET_NAMESTRING |
| by calls to set_namestring. |
| |
| 2003-01-11 J. Brobecker <brobecker@gnat.com> |
| |
| * hpread.c (SET_NAMESTRING): Remove an incorrect cast to fix |
| a compilation warning. |
| (hpread_process_one_debug_symbol): Likewise. |
| |
| 2003-01-10 David Carlton <carlton@math.stanford.edu> |
| |
| * linespec.c (decode_line_1): Rename variable 's' to |
| 'file_symtab'. |
| (decode_all_digits): Rename argument 's' to 'file_symtab'. |
| (decode_dollar): Ditto. |
| (decode_variable): Ditto. |
| (symbol_found): Ditto. |
| |
| 2003-01-09 Michael Chastain <mec@shout.net> |
| |
| * config/djgpp/fnchange.lst: update file list for testsuite/gdb.c++. |
| |
| 2003-01-07 Corinna Vinschen <vinschen@redhat.com> |
| |
| * win32-nat.c (set_process_privilege): New function. |
| (child_attach): Call set_process_privilege() to enable the |
| SE_DEBUG_NAME user privilege if available in process token. |
| |
| 2003-01-10 J. Brobecker <brobecker@gnat.com> |
| |
| * hpread.c (hpread_process_one_debug_symbol): Fix a small |
| compilation error in the previous revision. |
| |
| 2003-01-09 David Carlton <carlton@math.stanford.edu> |
| |
| * linespec.c: Update copyright. |
| |
| 2003-01-09 Daniel Jacobowitz <drow@mvista.com> |
| |
| * lin-lwp.c (child_wait): Ignore exit statuses for processes other |
| than inferior_ptid. |
| (lin_lwp_wait): Ignore exit statuses for unknown LWPs. |
| |
| 2003-01-09 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.h (frame_obstack_zalloc): Replace frame_obstack_alloc. |
| Update comments. |
| * frame.c (frame_obstack_zalloc): Replace frame_obstack_alloc. |
| (frame_saved_regs_zalloc): Update. |
| (frame_saved_regs_register_unwind): Update. |
| (create_new_frame): Update. |
| (get_prev_frame): Update. |
| (frame_extra_info_zalloc): Update. |
| (deprecated_get_frame_saved_regs): Update. |
| * dwarf2cfi.c (cfi_init_extra_frame_info): Update. |
| * cris-tdep.c: Update comment. |
| |
| * somsolib.h: Fix function indentation. |
| * disasm.c, buildsym.c, buildsym.h: Eliminate PTR. |
| * gnu-v2-abi.c, f-typeprint.c, x86-64-linux-tdep.c: Eliminate STREQ. |
| * demangle.c, ax-gdb.c, c-valprint.c: Eliminate STREQ. |
| * alpha-osf1-tdep.c, corefile.c: Eliminate STREQ. |
| * somsolib.c, inftarg.c: Remove assignment in if conditional. |
| |
| * infrun.c (follow_fork): Use ISO C definition. |
| * expprint.c (print_subexp): Use xfree instead of free. |
| * charset.c: Include "gdb_string.h" instead of <string.h>. |
| (register_iconv_charsets): Use ISO C definition. |
| (host_charset, target_charset): Ditto. |
| * Makefile.in (charset.o): Update dependencies. |
| (mi-cmd-env.o): Update dependencies. |
| |
| 2003-01-08 Andrew Cagney <cagney@redhat.com> |
| |
| * alpha-linux-tdep.c (alpha_linux_sigcontext_addr): Use |
| get_frame_base. |
| |
| 2003-01-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdb_mbuild.sh: Add --keep option. When specified, keep the |
| build directories. Save edited gdb output in Mbuild.log. If a |
| build fails, remove any final GDB executable. |
| |
| 2003-01-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdb_mbuild.sh: Edit the output of `maint print architecture' |
| replacing hex constants with function names and stripping leading |
| file name directory prefixes. |
| |
| 2003-01-08 Andrew Cagney <cagney@redhat.com> |
| |
| * gcore.c, i386-linux-tdep.c: Use get_frame_pc, get_next_frame and |
| get_frame_base. |
| |
| 2003-01-08 David Carlton <carlton@math.stanford.edu> |
| |
| * linespec.c (decode_line_1): Move code into decode_variable. |
| (decode_variable): New function. |
| |
| 2003-01-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * mn10300-tdep.c (analyze_dummy_frame): Fix typo. |
| |
| 2003-01-08 Andrew Cagney <cagney@redhat.com> |
| |
| * cris-tdep.c (cris_frame_init_saved_regs): Use |
| get_frame_saved_regs and SIZEOF_FRAME_SAVED_REGS when copying a |
| saved_regs buffer. |
| * sh-tdep.c (sh_nofp_frame_init_saved_regs): Ditto. |
| (sh64_nofp_frame_init_saved_regs): Ditto. |
| (sh_fp_frame_init_saved_regs): Ditto. |
| * arm-tdep.c: Use deprecated_set_frame_saved_regs_hack. |
| * mips-tdep.c (mips_init_extra_frame_info): Ditto. |
| * mcore-tdep.c (analyze_dummy_frame): Ditto. |
| * mn10300-tdep.c (analyze_dummy_frame): Ditto. |
| |
| 2003-01-08 Daniel Jacobowitz <drow@mvista.com> |
| |
| * minsyms.c (lookup_minimal_symbol): Update comment. |
| (lookup_minimal_symbol_text): Update comment. Use the hash table. |
| (lookup_minimal_symbol_solib_trampoline): Likewise. |
| |
| 2003-01-08 Andrew Cagney <cagney@redhat.com> |
| |
| * d10v-tdep.c (d10v_init_extra_frame_info): Use |
| frame_relative_level. |
| |
| * alpha-tdep.c: Use get_frame_extra_info. |
| * arm-tdep.c, avr-tdep.c, cris-tdep.c, d10v-tdep.c: Ditto. |
| * h8300-tdep.c, ia64-tdep.c, m68hc11-tdep.c, mcore-tdep.c: Ditto. |
| * mips-tdep.c, mn10300-tdep.c, s390-tdep.c, sh-tdep.c: Ditto. |
| * sparc-tdep.c, xstormy16-tdep.c: Ditto. |
| |
| * alpha-tdep.c: Use get_next_frame. |
| * arm-tdep.c, avr-tdep.c, cris-tdep.c, d10v-tdep.c: Ditto. |
| * dwarf2cfi.c, h8300-tdep.c, i386-tdep.c, ia64-tdep.c: Ditto. |
| * m68hc11-tdep.c, m68k-tdep.c, mcore-tdep.c: Ditto. |
| * mips-tdep.c, mn10200-tdep.c, mn10300-tdep.c: Ditto. |
| * ns32k-tdep.c, s390-tdep.c, sh-tdep.c, sparc-tdep.c: Ditto. |
| * v850-tdep.c, vax-tdep.c, x86-64-linux-tdep.c: Ditto. |
| * xstormy16-tdep.c: Ditto. |
| |
| 2003-01-07 Andrew Cagney <cagney@redhat.com> |
| |
| * alpha-tdep.c: Use get_frame_base. |
| * arm-tdep.c, avr-tdep.c, cris-tdep.c, d10v-tdep.c: Ditto. |
| * h8300-tdep.c, i386-tdep.c, ia64-tdep.c, m68hc11-tdep.c: Ditto. |
| * m68k-tdep.c, mcore-tdep.c, mips-tdep.c, mn10200-tdep.c: Ditto. |
| * mn10300-tdep.c, ns32k-tdep.c, s390-tdep.c, sh-tdep.c: Ditto. |
| * sparc-tdep.c, v850-tdep.c, vax-tdep.c: Ditto. |
| * x86-64-linux-tdep.c, xstormy16-tdep.c: Ditto. |
| * config/h8500/tm-h8500.h, config/mn10200/tm-mn10200.h: Ditto. |
| * config/sparc/tm-sparc.h: Ditto. |
| |
| 2003-01-07 Andrew Cagney <cagney@redhat.com> |
| |
| * frame.c (deprecated_get_frame_context): New function. |
| (deprecated_set_frame_context): New function. |
| * frame.h (deprecated_get_frame_context): Declare. |
| (deprecated_set_frame_context): Declare. |
| * dwarf2cfi.c (UNWIND_CONTEXT): Use deprecated_get_frame_context. |
| (cfi_init_extra_frame_info): Use deprecated_set_frame_context. |
| |
| 2003-01-07 Andrew Cagney <cagney@redhat.com> |
| |
| * frame.c (deprecated_set_frame_next_hack): New function. |
| (deprecated_set_frame_prev_hack): New function. |
| * frame.h (deprecated_set_frame_next_hack): Declare. |
| (deprecated_set_frame_prev_hack): Declare. |
| * mcore-tdep.c (analyze_dummy_frame): Use |
| deprecated_set_frame_next_hack and deprecated_set_frame_prev_hack. |
| * mn10300-tdep.c (analyze_dummy_frame): Ditto. |
| |
| 2003-01-07 David Carlton <carlton@math.stanford.edu> |
| |
| * linespec.c (decode_line_1): Move code into decode_dollar. |
| (decode_dollar): New function. |
| |
| 2003-01-07 Andrew Cagney <cagney@redhat.com> |
| |
| * arm-tdep.c (arm_init_extra_frame_info): Use |
| deprecated_update_frame_base_hack. |
| * xstormy16-tdep.c (xstormy16_scan_prologue): Ditto. |
| * mn10300-tdep.c (analyze_dummy_frame): Ditto. |
| (fix_frame_pointer): Ditto. |
| (mn10300_analyze_prologue): Ditto. |
| |
| 2003-01-07 Andrew Cagney <cagney@redhat.com> |
| |
| * xstormy16-tdep.c (xstormy16_init_extra_frame_info): Allocate |
| extra_info using frame_extra_info_zalloc. |
| * sparc-tdep.c (sparc_init_extra_frame_info): Ditto. |
| * sh-tdep.c (sh_init_extra_frame_info): Ditto. |
| (sh64_init_extra_frame_info): Ditto. |
| * mn10300-tdep.c (mn10300_init_extra_frame_info): Ditto. |
| * s390-tdep.c (s390_init_extra_frame_info): Ditto. |
| * mips-tdep.c (mips_init_extra_frame_info): Ditto. |
| * mcore-tdep.c (mcore_init_extra_frame_info): Ditto. |
| * frv-tdep.c (frv_init_extra_frame_info): Ditto. |
| * m68hc11-tdep.c (m68hc11_init_extra_frame_info): Ditto. |
| * ia64-tdep.c (ia64_init_extra_frame_info): Ditto. |
| * h8300-tdep.c (h8300_init_extra_frame_info): Ditto. |
| * d10v-tdep.c (d10v_init_extra_frame_info): Ditto. |
| * cris-tdep.c (cris_init_extra_frame_info): Ditto. |
| * arm-tdep.c (arm_init_extra_frame_info): Ditto. |
| * alpha-tdep.c (alpha_init_extra_frame_info): Ditto. |
| |
| * mn10300-tdep.c (analyze_dummy_frame): Use |
| deprecated_set_frame_extra_info_hack. |
| * mcore-tdep.c (analyze_dummy_frame): Ditto. |
| |
| 2003-01-07 J. Brobecker <brobecker@gnat.com> |
| |
| * mdebugread.c (parse_symbol): Skip stProc entries which storage |
| class is not scText. These do not define "real" procedures. |
| (parse_partial_symbols): Likewise. |
| |
| 2003-01-06 Michael Snyder <msnyder@redhat.com> |
| |
| * lin-lwp.c: Added or elaborated on "debug lin-lwp" info. |
| |
| 2003-01-06 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.h (deprecated_frame_xmalloc_with_cleanup): Declare. |
| * frame.c (deprecated_frame_xmalloc_with_cleanup): New function. |
| * arm-tdep.c (arm_frame_chain): Allocate caller_fi using |
| deprecated_frame_xmalloc_with_cleanup. |
| * m32r-tdep.c (m32r_virtual_frame_pointer): Allocate `fi' using |
| deprecated_frame_xmalloc. |
| * mcore-tdep.c (analyze_dummy_frame): Ditto for dummy. |
| * mn10200-tdep.c (mn10200_frame_chain): Ditto for dummy_frame. |
| |
| 2003-01-06 Andrew Cagney <cagney@redhat.com> |
| |
| * x86-64-linux-tdep.c: Include "osabi.h". |
| * Makefile.in (x86-64-linux-tdep.o): Update dependencies. |
| |
| * sparc-tdep.c (sparc_dump_tdep): Fix typo, match -> mach. |
| |
| 2003-01-06 Andrew Cagney <cagney@redhat.com> |
| |
| * MAINTAINERS (Target Instruction Set Architectures): Update |
| arm-elf. Can be built with -Werror, has been multiarched. |
| |
| * value.h (unpack_long): Make buffer parameter constant. |
| (unpack_double, unpack_pointer, unpack_field_as_long): Ditto. |
| * scm-lang.h (scm_parse): Ditto. |
| * defs.h (extract_typed_address, extract_address): Ditto. |
| (extract_long_unsigned_integer): Ditto. |
| * inferior.h (unsigned_pointer_to_address): Ditto. |
| (signed_pointer_to_address): Ditto. |
| * gdbarch.sh (POINTER_TO_ADDRESS): Ditto. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * findvar.c (extract_long_unsigned_integer): Update. |
| (extract_address): Update. |
| (extract_typed_address): Update. |
| (unsigned_pointer_to_address): Update. |
| * values.c (unpack_long): Update. |
| (unpack_double): Update. |
| (unpack_pointer): Update. |
| (unpack_field_as_long): Update. |
| * d10v-tdep.c (d10v_pointer_to_address): Update. |
| * avr-tdep.c (avr_pointer_to_address): Update. |
| * scm-lang.c (scm_unpack): Update. |
| * findvar.c (signed_pointer_to_address): Update. |
| |
| 2003-01-06 Michal Ludvig <mludvig@suse.cz> |
| |
| * x86-64-linux-nat.c (i386_sse_regnum_p): Deleted. Not needed anymore |
| since it is in i386-tdep.c. |
| |
| 2003-01-06 J. Brobecker <brobecker@gnat.com> |
| |
| * alpha-tdep.c (alpha_gdbarch_init): Fix a small compilation |
| failure introduced in the previous change. |
| |
| 2003-01-05 Michael Chastain <mec@shout.net> |
| |
| * README: Remove references to deleted remote-*.c files: |
| remote-adapt.c, remote-eb.c, remote-mm.c, remote-nindy.c, |
| remote-nrom.c, remote-os9k.c, remote-udi.c. |
| |
| 2003-01-05 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_get_longjmp_target): Make usable on x86-64. |
| * x86-64-tdep.c (x86_64_init_abi): Remove FIXME about |
| i386_get_longjmp_target. |
| |
| 2003-01-05 Andrew Cagney <ac131313@redhat.com> |
| |
| * arm-tdep.c (prologue_cache): Change to a pointer. |
| (_initialize_arm_tdep): Allocate prologue_cache. |
| (check_prologue_cache): Update. |
| (save_prologue_cache): Update. |
| (arm_gdbarch_init): Update. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * stabsread.c (update_method_name_from_physname): Call complaint() |
| instead of error. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * arm-tdep.c (arm_frame_chain_valid): Remove unnecessary test. |
| * d10v-tdep.c (d10v_frame_chain_valid): Remove unnecessary tests. |
| * hppa-tdep.c (hppa_frame_chain_valid): Remove unnecessary test. |
| |
| * blockframe.c: Include "gdbcmd.h" and "command.h". |
| (backtrace_below_main): New variable. |
| (file_frame_chain_valid, func_frame_chain_valid) |
| (nonnull_frame_chain_valid, generic_file_frame_chain_valid) |
| (generic_func_frame_chain_valid): Remove functions. |
| (frame_chain_valid, do_flush_frames_sfunc): New functions. |
| (_initialize_blockframe): New function. |
| * Makefile.in (blockframe.o): Update dependencies. |
| * frame.c (frame_saved_regs_id_unwind, get_prev_frame): Remove FIXME |
| comment. Call frame_chain_valid (). |
| * frame.h: Remove old prototypes. Add prototype for |
| frame_chain_valid and update comments to match. |
| * gdbarch.sh: Change FRAME_CHAIN_VALID into a predicated function. |
| Remove old comment. |
| * gdbarch.h: Regenerated. |
| * gdbarch.c: Regenerated. |
| |
| * alpha-tdep.c (alpha_gdbarch_init): Don't call |
| set_gdbarch_frame_chain_valid. |
| * avr-tdep.c (avr_gdbarch_init): Likewise. |
| * cris-tdep.c (cris_gdbarch_init): Likewise. |
| * frv-tdep.c (frv_gdbarch_init): Likewise. |
| * h8300-tdep.c (h8300_gdbarch_init): Likewise. |
| * i386-tdep.c (i386_svr4_init_abi): Likewise. |
| (i386_nw_init_abi): Likewise. |
| (i386_gdbarch_init): Likewise. |
| * ia64-tdep.c (ia64_gdbarch_init): Likewise. |
| * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. |
| * m68k-tdep.c (m68k_gdbarch_init): Likewise. |
| * mcore-tdep.c (mcore_gdbarch_init): Likewise. |
| * mips-tdep.c (mips_gdbarch_init): Likewise. |
| * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. |
| * ns32k-tdep.c (ns32k_gdbarch_init): Likewise. |
| * ppcnbsd-tdep.c (ppcnbsd_init_abi): Likewise. |
| * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. |
| * s390-tdep.c (s390_gdbarch_init): Likewise. |
| * sh-tdep.c (sh_gdbarch_init): Likewise. |
| * sparc-tdep.c (sparc_gdbarch_init): Likewise. |
| * v850-tdep.c (v850_gdbarch_init): Likewise. |
| * vax-tdep.c (vax_gdbarch_init): Likewise. |
| * x86-64-tdep.c (x86_64_init_abi): Likewise. |
| |
| * config/m32r/tm-m32r.h (FRAME_CHAIN_VALID): Don't define. |
| * config/m68k/tm-apollo68b.h (FRAME_CHAIN_VALID): Likewise. |
| * config/m68k/tm-m68kv4.h (FRAME_CHAIN_VALID): Likewise. |
| * config/m68k/tm-monitor.h (FRAME_CHAIN_VALID): Likewise. |
| * config/m68k/tm-os68k.h (FRAME_CHAIN_VALID): Likewise. |
| * config/m68k/tm-vx68.h (FRAME_CHAIN_VALID): Likewise. |
| * config/mn10200/tm-mn10200.h (FRAME_CHAIN_VALID): Likewise. |
| * config/sparc/tm-sparclite.h (FRAME_CHAIN_VALID): Likewise. |
| |
| 2002-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * Makefile.in (acconfig_h): Remove incorrect macro. |
| (config_h): Define. |
| (osabi.o): Update dependencies. |
| * configure.tgt: Set gdb_osabi based on target triplet. |
| * configure.in: Define GDB_OSABI_DEFAULT based on gdb_osabi. |
| * configure: Regenerated. |
| * config.in: Regenerated. |
| * osabi.c: Include "arch-utils.h", "gdbcmd.h", and "command.h". |
| (GDB_OSABI_DEFAULT): Define if not already defined. |
| (user_osabi_state, user_selected_osabi, gdb_osabi_available_names) |
| (set_osabi_string): New variables. |
| (gdbarch_register_osabi): Add new OS ABI to |
| gdb_osabi_available_names. |
| (gdbarch_lookup_osabi): Honor specified and default OS ABIs. |
| (set_osabi, show_osabi): New functions. |
| (_initialize_gdb_osabi): Add "set osabi" and "show osabi" commands. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * arch-utils.c (gdbarch_info_init): Set osabi to |
| GDB_OSABI_UNINITIALIZED. |
| * gdbarch.sh: Add osabi to struct gdbarch and to struct |
| gdbarch_info. Include "osabi.h" in gdbarch.c. Check osabi |
| in gdbarch_list_lookup_by_info and in gdbarch_update_p. |
| * gdbarch.c: Regenerated. |
| * gdbarch.h: Regenerated. |
| * osabi.c (gdbarch_lookup_osabi): Return GDB_OSABI_UNINITIALIZED if |
| there's no BFD. |
| (gdbarch_init_osabi): Remove osabi argument; use info.osabi. |
| * osabi.h (enum gdb_osabi): Move to defs.h. |
| (gdbarch_init_osabi): Update prototype. |
| * defs.h (enum gdb_osabi): Moved here. |
| * Makefile.in: Update dependencies. |
| |
| * alpha-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove osabi member. |
| * alpha-tdep.c: Include "osabi.h". |
| (alpha_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| iterate over arches. Update call to gdbarch_init_osabi. |
| (alpha_dump_tdep): Don't dump osabi. |
| * alpha-linux-tdep.c: Include "osabi.h". |
| * alpha-osf1-tdep.c: Include "osabi.h". |
| * alphafbsd-tdep.c: Include "osabi.h". |
| * alphanbsd-tdep.c: Include "osabi.h". |
| |
| * arm-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove osabi member. |
| * arm-tdep.c: Include "osabi.h". |
| (arm_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| iterate over arches. Update call to gdbarch_init_osabi. |
| (arm_dump_tdep): Don't dump osabi. |
| * arm-linux-tdep.c: Include "osabi.h". |
| * armnbsd-tdep.c: Include "osabi.h". |
| |
| * hppa-tdep.c (hppa_gdbarch_init): Don't call gdbarch_lookup_osabi. |
| Update call to gdbarch_init_osabi. |
| |
| * i386-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove osabi member. |
| * i386-tdep.c: Include "osabi.h". |
| (i386_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| iterate over arches. Update call to gdbarch_init_osabi. |
| (i386_dump_tdep): Don't dump osabi. |
| * i386-linux-tdep.c: Include "osabi.h". |
| * i386-sol2-tdep.c: Include "osabi.h". |
| * i386bsd-tdep.c: Include "osabi.h". |
| * i386gnu-tdep.c: Include "osabi.h". |
| * i386ly-tdep.c: Include "osabi.h". |
| * i386nbsd-tdep.c: Include "osabi.h". |
| * i386obsd-tdep.c: Include "osabi.h". |
| |
| * mips-tdep.c (struct gdbarch_tdep): Remove osabi member. |
| (mips_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| check osabi when iterating over arches. Update call to |
| gdbarch_init_osabi. |
| (mips_dump_tdep): Don't dump osabi. |
| |
| * ns32k-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove. |
| * ns32k-tdep.c (ns32k_gdbarch_init): Don't call |
| gdbarch_lookup_osabi. Don't iterate over arches. Don't |
| allocate tdep. Update call to gdbarch_init_osabi. |
| (ns32k_dump_tdep): Remove. |
| (_initialize_ns32k_tdep): Update call to gdbarch_register. |
| * ns32knbsd-tdep.c: Include "osabi.h". |
| |
| * ppc-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove osabi member. |
| * rs6000-tdep.c: Include "osabi.h". |
| (rs6000_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't check |
| osabi when iterating over arches. Update call to |
| gdbarch_init_osabi. |
| (rs6000_dump_tdep): Don't dump osabi. |
| * ppc-linux-tdep.c: Include "osabi.h". |
| * ppcnbsd-tdep.c: Include "osabi.h". |
| |
| * sh-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove osabi member. |
| * sh-tdep.c: Include "osabi.h". |
| (sh_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| iterate over arches. Update call to gdbarch_init_osabi. |
| (sh_dump_tdep): Don't dump osabi. |
| * shnbsd-tdep.c: Include "osabi.h". |
| |
| * sparc-tdep.c: Include "osabi.h". |
| (sparc_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| iterate over arches. Update call to gdbarch_init_osabi. |
| (sparc_dump_tdep): Don't dump osabi. Do dump the rest of the |
| tdep structure. |
| |
| * vax-tdep.h: Don't include "osabi.h". |
| (struct gdbarch_tdep): Remove. |
| * vax-tdep.c: Include "osabi.h". |
| (vax_gdbarch_init): Don't call gdbarch_lookup_osabi. Don't |
| iterate over arches. Don't allocate tdep. Update call |
| to gdbarch_init_osabi. |
| (vax_dump_tdep): Remove. |
| (_initialize_vax_tdep): Update call to gdbarch_register. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * breakpoint.c (insert_breakpoints): Skip disabled breakpoints |
| entirely. |
| (breakpoint_re_set_one): Don't fetch the value for a disabled |
| watchpoint. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * buildsym.h (processing_hp_compilation): Remove obsolete variable. |
| * gdbarch.sh Remove include of "value.h" in gdbarch.h. |
| (COERCE_FLOAT_TO_DOUBLE): Remove. |
| * gdbarch.c: Regenerate. |
| * gdbarch.h: Regenerate. |
| * Makefile.in: Remove value_h from gdbarch_h. |
| * valops.c (coerce_float_to_double): New variable. |
| (default_coerce_float_to_double): Remove. |
| (standard_coerce_float_to_double): Remove. |
| (value_arg_coerce): Use coerce_float_to_double. |
| (_initialize_valops): Add "set coerce-float-to-double". |
| * value.h (default_coerce_float_to_double): Remove prototype. |
| (standard_coerce_float_to_double): Remove prototype. |
| |
| * hpread.c (hpread_process_one_debug_symbol): Mark C++ functions as |
| prototyped. |
| * mdebugread.c (parse_symbol): Likewise. |
| * stabsread.c (define_symbol): Mark all functions as prototyped. |
| |
| * hppa-tdep.c (hppa_coerce_float_to_double): Remove. |
| * alpha-tdep.c (alpha_gdbarch_init): Remove call to |
| set_gdbarch_coerce_float_to_double. |
| * arm-tdep.c (arm_gdbarch_init): Likewise. |
| * frv-tdep.c (frv_gdbarch_init): Likewise. |
| * h8300-tdep.c (h8300_gdbarch_init): Likewise (commented out). |
| * i386-sol2-tdep.c (i386_sol2_init_abi): Likewise. |
| * mips-tdep.c (mips_gdbarch_init): Likewise. |
| (mips_coerce_float_to_double): Remove. |
| * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. |
| (rs6000_coerce_float_to_double): Remove. |
| * s390-tdep.c (s390_gdbarch_init): Likewise. |
| * sh-tdep.c (sh_gdbarch_init): Likewise. |
| (sh_coerce_float_to_double): Remove. |
| * sparc-tdep.c (sparc_gdbarch_init): Likewise. |
| (sparc_coerce_float_to_double): Remove. |
| * v850-tdep.c (v850_gdbarch_init): Likewise. |
| * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. |
| * config/m32r/tm-m32r.h (COERCE_FLOAT_TO_DOUBLE): Remove. |
| * config/pa/tm-hppa.h: (COERCE_FLOAT_TO_DOUBLE): Remove. |
| (hppa_coerce_float_to_double): Remove prototype. |
| * config/sparc/tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Remove. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * regformats/reg-m68k.dat: Remove fpcode and fpflags. |
| |
| 2003-01-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| Suggested by Stewart Brown <sb24@avaya.com>: |
| * c-typeprint.c (c_type_print_varspec_prefix): Pass value of show |
| in recursive calls. Handle TYPE_CODE_TYPEDEF. |
| (c_type_print_varspec_suffix): Likewise. |
| |
| 2003-01-04 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Don't set and AC_SUBST SUBDIRS. |
| * configure: Regenerated. |
| |
| * configure.in: Remove code dealing with shared libraries. |
| * Makefile.in: Remove HLDFLAGS and HLDENV. |
| * configure: Regenerated. |
| |
| 2003-01-04 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.c (deprecated_frame_xmalloc): New function. |
| (deprecated_set_frame_saved_regs_hack): New function. |
| (deprecated_set_frame_extra_info_hack): New function. |
| * frame.h (deprecated_frame_xmalloc): Declare. |
| (deprecated_set_frame_saved_regs_hack): Declare. |
| (deprecated_set_frame_extra_info_hack): Declare. |
| |
| 2003-01-04 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Move code that provides the --enable-gdbtk option |
| right after the code that handles the --enable-tui option, and |
| polish it somewhat. |
| * configure: Regenerated. |
| |
| * configure.in: Call AC_GNU_SOURCE. Check for pread64 using |
| AC_CHECK_FUNCS and remove the old check for pread64. |
| * acinclude.m4 (AC_GNU_SOURCE): New macro. |
| * acconfig.h (_GNU_SOURCE): Add. |
| (HAVE_PREAD64): Remove. |
| * configure, aclocal.m4, config.in: Regenerated. |
| |
| 2003-01-03 Andrew Cagney <ac131313@redhat.com> |
| |
| * alpha-tdep.c: Use get_frame_saved_regs. |
| * arm-tdep.c, avr-tdep.c, cris-tdep.c, d10v-tdep.c: Ditto. |
| * h8300-tdep.c, i386-tdep.c, ia64-tdep.c, m68hc11-tdep.c: Ditto. |
| * m68k-tdep.c, mcore-tdep.c, mips-tdep.c, mn10300-tdep.c: Ditto. |
| * ns32k-tdep.c, s390-tdep.c, sh-tdep.c, v850-tdep.c: Ditto. |
| * vax-tdep.c, xstormy16-tdep.c: Ditto. |
| |
| 2003-01-03 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Remove all use of the SUBDIRS variable; add |
| directories using the AC_CONFIG_SUBDIRS macro instead. Polish |
| code providing the --enable-multi-ice option, and move it right in |
| front of the code that checks whether gdbserver is supported. |
| Polish that too. |
| * configure: Regenerated. |
| * Makefile.in (SUBDIRS): Substitute @subdirs@ instead of |
| @SUBDIRS@. |
| |
| 2003-01-03 Andrew Cagney <cagney@redhat.com> |
| |
| * alpha-tdep.c: Use deprecated_update_frame_base_hack. |
| * avr-tdep.c, cris-tdep.c: Ditto. |
| * mcore-tdep.c, mips-tdep.c, mn10200-tdep.c: Ditto. |
| * sh-tdep.c, sparc-tdep.c, v850-tdep.c: Ditto. |
| |
| 2003-01-03 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Remove --enable-netrom option. |
| * configure: Regenerated. |
| |
| 2003-01-03 Mark Kettenis <kettenis@gnu.org> |
| |
| * cli/cli-decode.h: Don't include "gdb_regex.h"; provide a forward |
| declaration for `struct re_pattern_buffer' instead. |
| * Makefile.in (cli_decode_h): Remove $(gdb_regex_h). |
| |
| 2003-01-03 J. Brobecker <brobecker@gnat.com> |
| |
| * mdebugread.c (parse_symbol): Count until the stEnd matching |
| the structure name. |
| |
| 2003-01-02 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Remove --with-cpu option. |
| subscripts. Remove evil changequotes here. |
| * acconfig.h (TARGET_CPU_DEFAULT): Remove. |
| * config.in, configure: Regenerated. |
| |
| * acconfig.h (DEFAULT_BFD_ARCH, DEFAULT_BFD_VEC): Remove. |
| * configure.in: Cleanup section that sources GDB and BFD configure |
| subscripts. Remove evil changequotes here. |
| * config.in, configure: Regenerated. |
| |
| 2003-01-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * arm-tdep.c: Use get_frame_pc and deprecated_update_frame_pc_hack |
| frame accessor methods. |
| * alpha-tdep.c, avr-tdep.c, cris-tdep.c, d10v-tdep.c: Ditto. |
| * dwarf2cfi.c, h8300-tdep.c, i386-tdep.c, ia64-tdep.c: Ditto. |
| * m68hc11-tdep.c, m68k-tdep.c, mcore-tdep.c, mips-tdep.c: Ditto. |
| * mn10200-tdep.c, mn10300-tdep.c, ns32k-tdep.c: Ditto. |
| * s390-tdep.c, sh-tdep.c, sparc-tdep.c, v850-tdep.c: Ditto. |
| * vax-tdep.c, x86-64-linux-tdep.c, xstormy16-tdep.c: Ditto. |
| * z8k-tdep.c: Ditto. |
| |
| 2003-01-02 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Remove UI_OUT configuration code. |
| * ada-lang.c: Update assuming UI_OUT is always true. |
| * Makefile.in (UIOUT_CFLAGS): Remove. |
| * configure: Regenerated. |
| * TODO: Remove blurb about elimination of -DUI_OUT. |
| |
| * configure.in: Move code that provides the --enable-gdbcli, |
| --enable-gdbmi options right before the code that handles the |
| --enable-tui option. Polish a bit. |
| * configure: Regenerated. |
| |
| * configure.in: Rewrite check for GNU regex and the |
| --without-included regex option, and move it into the "Checks for |
| library functions" section. This makes us use the system regex |
| again by default on systems with version 2 of the GNU C library. |
| This was apparently broken. |
| * gdb_regex.h [!USE_INCLUDED_REGEX] (_REGEX_RE_COMP): Define. |
| * acconfig.h (USE_INCLUDED_REGEX): Remove. |
| * config.in, configure: Regenerated. |
| |
| * configure.in: Move code that provides the --enable-tui option |
| before the "Checks for libraries" section. Polish the code |
| somewhat and set need_curses to yes if we build the TUI. Rewrite |
| code that looks for a library providing termcap functionality to |
| match more closely what's done in the Readline library, and move |
| it into to the "Checks for libraries" section. |
| * configure: Regenerated. |
| * Makefile.in (TERMCAP): Remove variable. |
| * config/i386/go32.mh (TERMCAP): Remove variable. |
| |
| 2003-01-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Mention gdb_mbuild.sh. |
| * gdb_mbuild.sh: Rewrite. |
| |
| 2003-01-02 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Fix typo in last change. |
| * config.in, configure: Regenerated. |
| |
| 2003-01-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * valarith.c (value_binop): Delete obsolete code and comments. |
| * configure.host: Ditto. |
| * buildsym.h (make_blockvector): Ditto. |
| * buildsym.c (make_blockvector): Ditto. |
| * defs.h (enum language): Ditto. |
| (chill_demangle): Ditto. |
| * elfread.c (elf_symtab_read): Ditto. |
| * dwarfread.c (CHILL_PRODUCER): Ditto. |
| (set_cu_language): Ditto. |
| (handle_producer): Ditto. |
| * expprint.c (print_subexp): Ditto. |
| * gdbtypes.c (chill_varying_type): Ditto. |
| * gdbtypes.h (builtin_type_chill_bool): Ditto. |
| (builtin_type_chill_char, builtin_type_chill_long): Ditto. |
| (builtin_type_chill_ulong, builtin_type_chill_real): Ditto. |
| (chill_varying_type): Ditto. |
| * language.h (_LANG_chill): Ditto. |
| * language.c (binop_result_type, integral_type): Ditto. |
| (character_type, string_type, structured_type): Ditto. |
| (lang_bool_type, binop_type_check): Ditto. |
| * stabsread.h (os9k_stabs): Ditto. |
| * stabsread.c (os9k_type_vector, dbx_lookup_type): Ditto. |
| (define_symbol, read_type, read_struct_fields): Ditto. |
| (read_array_type, read_enum_type, read_huge_number): Ditto. |
| (read_range_type, start_stabs): Ditto. |
| * symfile.c (init_filename_language_table): Ditto. |
| (add_psymbol_with_dem_name_to_list): Ditto. |
| * symtab.c (symbol_init_language_specific): Ditto. |
| (symbol_init_demangled_name, symbol_demangled_name): Ditto. |
| * symtab.h (struct general_symbol_info): Ditto. |
| (SYMBOL_CHILL_DEMANGLED_NAME): Ditto. |
| * typeprint.c (typedef_print): Ditto. |
| * utils.c (fprintf_symbol_filtered): Ditto. |
| * valops.c (value_cast, search_struct_field, value_slice): Delete |
| obsolete code. |
| (varying_to_slice): Delete function. |
| * value.h (COERCE_VARYING_ARRAY): Delete obsolete macro contents. |
| (varying_to_slice): Delete declaration. |
| * MAINTAINERS: Update. |
| |
| 2003-01-02 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Reorganize "Checks for library functions section" |
| a bit. Remove check for `btowc' and `isascii' functions. |
| * configure: Regenerated. |
| |
| * acconfig.h (_MSE_INT_H): Remove. |
| * configure.in: Create "Checks for header files" section, and move |
| appropriate tests there. Don't check for objlist.h, wchar.h, |
| wctype.h and asm/debugreg.h. Rewrite Solaris 2.[78] <curses.h> |
| misdetection fix. Also add "Checks for types", "Checks for |
| compiler characteristics" and "Checks for library functions" |
| sections. |
| * config.in, configure: Regenerated. |
| |
| * configure.in: Create "Checks for programs" section, and move |
| appropriate tests there. |
| |
| 2003-01-01 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.in: Create "Checks for libraries" section, and move |
| appropriate tests there. Cleanup check for wctype in libw. Use |
| AC_SEARCH_LIBS to see whether we need libsocket. |
| * configure: Regenerated. |
| |
| For older changes see ChangeLog-2002 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
