| 2006-06-20 Joel Brobecker <brobecker@adacore.com> |
| |
| * version.in: Set version to 6.5 for the release. |
| |
| 2006-06-20 Joel Brobecker <brobecker@adacore.com> |
| |
| * PROBLEMS: Document threads/2137. |
| |
| 2006-06-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * infrun.c (insert_step_resume_breakpoint_at_caller): New function, |
| based on insert_step_resume_breakpoint_at_frame. |
| (handle_inferior_event): Update comments. Use |
| insert_step_resume_breakpoint_at_caller. |
| (insert_step_resume_breakpoint_at_frame): Revise comments. |
| |
| 2006-06-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mingw-hdep.c (gdb_select): Always check for NULL fd sets |
| before calling FD_ISSET. Correct check for exceptfds which |
| previously tested writefds. |
| |
| 2006-06-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * version.in: Increase version number to 6.4.91 after the first |
| pre-release has been created. |
| |
| 2006-06-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac: -Werror is no longer enabled by default. |
| * configure: Regenerate. |
| |
| 2006-05-27 Joel Brobecker <brobecker@adacore.com> |
| |
| From Peter Schauer <peterschauer@gmx.net> |
| * m2-typeprint.c (m2_record_fields): Move variable declarations |
| to the begining of the block. |
| |
| 2006-05-20 Gaius Mulley <gaius@glam.ac.uk> |
| |
| * NEWS: (Improved Modula-2 language support): New section. |
| |
| 2006-05-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure: Regenerate using proper version of autoconf. |
| |
| 2006-05-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * README: Update date of last modification. |
| |
| 2006-05-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * README: Update GDB version number. |
| |
| 2006-05-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Change "Changes since GDB 6.4" into "Changes in GDB 6.5". |
| |
| 2006-05-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * version.in: Update to 6.4.90. |
| |
| 2006-05-14 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/gdb-mi.el (gdbmi-send): Correct regexp for repeat commands. |
| (gdbmi): Use new variable name gdb-pc-address. |
| (gdbmi-frame-handler): Use new variable name gdb-pc-address. |
| Check that a match has been found. |
| |
| 2006-05-13 Gaius Mulley <gaius@glam.ac.uk> |
| |
| * m2-lang.h: Added function extern prototypes for |
| m2_is_long_set and get_long_set_bounds. |
| * m2-typeprint.c: Complete replacement. |
| (m2_print_type): Walk the Modula-2 type tree. |
| (m2_type_name): New function. |
| (m2_range): New function. |
| (m2_typedef): New function. |
| (m2_array): New function. |
| (m2_pointer): New function. |
| (m2_ref): New function. |
| (m2_unknown): New function. |
| (m2_union): New function. |
| (m2_procedure): New function. |
| (m2_print_bounds): New function. |
| (m2_short_set): New function. |
| (m2_is_long_set): New function. |
| (m2_get_discrete_bounds): New function. |
| (m2_is_long_set_of_type): New function. |
| (m2_long_set): New function. |
| (m2_record_fields): New function. |
| (m2_enum): New function. |
| * dwarf2read.c: Modified. |
| (read_set_type): New function. |
| (process_die): Call read_set_type. |
| (read_base_type): Modifed. |
| (set_cu_language): Added Modula-2 case clause. |
| * m2-valprint.c: Complete replacement. |
| (print_function_pointer_address): New function. |
| (get_long_set_bounds): New function. |
| (m2_print_long_set): New function. |
| (print_unpacked_pointer): New function. |
| (print_variable_at_address): New function. |
| (m2_val_print): Replaced. |
| * gdb/MAINTAINERS (Write After Approval): Added |
| Gaius Mulley <gaius@glam.ac.uk> |
| |
| 2006-05-12 Mark Kettenis <kettenis@gnu.org> |
| |
| * ppcnbsd-tdep.h: Update copyright year. Include <stddef.h> |
| (ppcnbsd_supply_reg, ppcnbsd_fill_reg, ppcnbsd_supply_fpreg) |
| (ppcnbsd_fill_fpreg): Remove prototypes. |
| (struct regset): Add forward declaration. |
| (ppcnbsd_gregset, ppcnbsd_fpregset): Extern declarations. |
| * ppcnbsd-tdep.c: Update copyright year. Include "gdbtypes.h", |
| "regset.h" and "gdb_string.h". Don't include "breakpoint.h", |
| "value.h", target.h and nbsd-tdep.h". Reorder includes. |
| (REG_FIXREG_OFFSET, REG_LR_OFFSET, REG_CR_OFFSET, REG_XER_OFFSET) |
| (REG_CTR_OFFSET, REG_PC_OFFSET, SIZEOF_STRUCT_REG) |
| (FPREG_FPR_OFFSET, FPREG_FPSCR_OFFSET, SIZEOF_STRUCT_FPREG): |
| Remove macros. |
| (ppcnbsd_supply_reg, ppcnbsd_fill_reg, ppcnbsd_supply_fpreg) |
| (ppcnbsd_fill_fpreg): Remove functions. |
| (fetch_core_registers, fetch_elfcore_registers): Remove functions. |
| (ppcnbsd_core_fns, ppcnbsd_elfcore_fns): Remove variables. |
| (ppcnbsd_reg_offsets): New variable. |
| (ppcnbsd_gregset, ppcnbsd_fpregset): New variables. |
| (ppcnbsd_sigtramp_cache_init): Deal with new signal trampoline |
| introduced in NetBSD 2.0. |
| (ppcnbsd_sigtramp): Provide complete signal trampoline. |
| (ppcnbsd2_sigtramp): New variable. |
| (ppcnbsd_init_abi): Set svr4_fetch_link_map_offsets to |
| svr4_ilp32_fetch_link_map_offsets. Set regset_from_core_section. |
| Add ppcnbs2_sigtramp unwinder. |
| (_initialize_ppcnbsd_tdep): Don't use deprecated_add_core_fns. |
| Initialize ppcnbsd_reg_offsets. |
| * ppcnbsd-nat.c: Update copyright year. Reorder includes. |
| (getregs_supplies): Use regnum instead of regno. |
| (getfpregs_supplies): Likewise. |
| (ppcnbsd_fetch_inferior_registers): Likewise. Call |
| ppc_supply_gregset and ppc_suppply_fpregset instead of |
| ppcnbsd_supply_reg and ppcnbsd_supply_fpreg |
| (ppcnbsd_store_inferior_registers): Likewise. Call |
| ppc_collect_gregset and ppc_collect_fpregset instead of |
| ppcnbsd_fill_reg and ppcnbsd_fill_fpreg. |
| (ppcnbsd_supply_pcb): Use `gdb_byte *' instead of `char *'. |
| (_initialize_ppcnbsd_nat): Add some whitespace. |
| * Makefile.in (ppcnbsd-nat.o, ppcnbsd-tdep.o): Update dependencies. |
| * config/powerpc/nbsd.mh (NATDEPFILES): Remove infptrace.o. |
| (NAT_FILE): Remove. |
| * config/powerpc/nbsd.mt (TDEPFILES): Remove nbsd-tdep.o. |
| |
| 2006-05-11 Alfred M. Szmidt <ams@gnu.org> |
| |
| * gnu-nat.c (inf_validate_procs): Don't use lvalue in assignments. |
| |
| 2006-05-11 Fred Fish <fnf@specifix.com> |
| |
| * symtab.c (skip_prologue_using_sal): Handle single line functions |
| like "foo(){}", which may optimize down to a single return inst. |
| |
| 2006-05-10 Steve Ellcey <sje@cup.hp.com> |
| |
| * hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Remove |
| message. |
| |
| 2006-05-09 Andreas Schwab <schwab@suse.de> |
| |
| * dwarf2-frame.c (struct dwarf2_fde): Add eh_frame_p. |
| (execute_cfa_program): Add parameter eh_frame_p. Call |
| dwarf2_frame_eh_frame_regnum when true. |
| (dwarf2_frame_cache): Pass eh_frame_p from fde to |
| execute_cfa_program. |
| (decode_frame_entry_1): Call dwarf2_frame_eh_frame_regnum when |
| processing .eh_frame. Copy eh_frame_p to the new fde. |
| (struct dwarf2_frame_ops): Add eh_frame_regnum. |
| (dwarf2_frame_set_eh_frame_regnum): Define. |
| (dwarf2_frame_eh_frame_regnum): Define. |
| |
| * dwarf2-frame.h (dwarf2_frame_set_eh_frame_regnum): Declare. |
| (dwarf2_frame_eh_frame_regnum): Declare. |
| |
| 2006-05-06 David S. Miller <davem@sunset.davemloft.net> |
| |
| * linux-nat.c (linux_nat_do_thread_registers): Check for |
| NULL collect_regset method. |
| |
| 2006-05-06 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * s390-tdep.c (s390_collect_regset): New function. |
| (s390_gregset, s390x_gregset, s390_fpregset): Add it. |
| |
| 2006-05-06 Nick Roberts <nickrob@snap.net.nz> |
| |
| * dwarf2read.c: Make LOC_OPTIMIZED_OUT the default value for a |
| symbol. |
| |
| 2006-05-05 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * linux-nat.c (exit_lwp): Fix NULL pointer access. |
| (linux_nat_handle_extended): New parameter STOPPING. |
| (wait_lwp): Call it with STOPPING equals 1. |
| (linux_nat_wait): Call it with STOPPING equals 0. |
| |
| 2006-05-05 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * linux-nat.c (linux_nat_wait): Do not short-cut reporting |
| of 'uninteresting' signals when single-stepping. |
| |
| 2006-05-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Move NEWS to the documentation entry. |
| |
| 2006-05-05 David S. Miller <davem@sunset.davemloft.net> |
| |
| * linux-nat.c (linux_nat_do_thread_registers): Use the |
| regset_from_core_section infrastructure if the target |
| supports it. |
| * Makefile.in: Update dependencies. |
| * linux-thread-db.c (thread_db_store_registers): Use |
| regcache_raw_collect. |
| |
| 2006-05-05: Paul Gilliam <pgilliam@us.ibm.com> |
| |
| * ppc-linux-nat.c: Clean up types for ptrace. |
| Replace (CORE_ADDR) with (uintptr_t) to avoid the size difference |
| between a CORE_ADDR and a void* on ppc64 systems compiled for 32-bits. |
| |
| 2006-05-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (remote_disconnect): Add TARGET argument. |
| * target.c (debug_to_disconnect): Delete. |
| (update_current_target): Do not inherit to_disconnect. |
| (target_disconnect): Search for a target to implement to_disconnect. |
| (setup_target_debug): Do not reference to_disconnect. |
| * target.h (struct target_ops): Add target argument to |
| to_disconnect. |
| |
| 2006-05-06 Fred Fish <fnf@specifix.com> |
| |
| * mips-tdep.c (mips_o64_push_dummy_call): Left shift big endian |
| structs or unions independent of ABI register size. |
| |
| 2006-05-06 Fred Fish <fnf@specifix.com> |
| |
| * mips-tdep.c (mips_o64_return_value): Replace stub that always |
| returned RETURN_VALUE_STRUCT_CONVENTION with a real function. |
| |
| 2006-05-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mi/mi-main.c (captured_mi_execute_command): Check the return |
| value of -interpreter-exec. |
| |
| 2006-05-03 Vladimir Prus <ghost@cs.msu.su> |
| |
| * varobj.c (c_value_of_variable): Ignore top-level references. |
| (Committed by Jim Blandy.) |
| |
| 2006-04-30 Mark Kettenis <kettenis@gnu.org> |
| |
| * breakpoint.c (insert_single_step_breakpoint): Make a failure to |
| insert a single-step breakpoint an error instead of a warning. |
| |
| 2006-05-01 Nathan J. Williams <nathanw@wasabisystems.com> |
| |
| * ppcnbsd-tdep.c (ppcnbsd_return_value): Change type of last two |
| arguments from void * to gdb_byte *. |
| |
| 2006-04-26 Michael Snyder <msnyder@redhat.com> |
| |
| * linux-fork.c (_initialize_linux_fork): Rename "delete-fork" |
| command to "delete fork" (no hyphen), compatible with other |
| "delete" commands. |
| (info_forks_command): Accept a fork ID argument, for info |
| on a single fork. Report if no matching forks. |
| |
| 2006-04-25 Mark Kettenis <kettenis@gnu.org> |
| |
| * breakpoint.c (remove_single_step_breakpoints): Bail out early if |
| no breakpoints are inserted. |
| |
| From Masaki MURANAKA <monaka@monami-software.com>: |
| * mips-mdebug-tdep.c (mips_mdebug_frame_prev_register): Change |
| type of last argument to `gdb_byte *' |
| |
| 2006-04-25 Jim Blandy <jimb@codesourcery.com> |
| |
| Add support for 'target remote |' on MinGW. |
| * ser-mingw.c (struct pipe_state): New structure. |
| (make_pipe_state, free_pipe_state, cleanup_pipe_state) |
| (pipe_windows_open, pipe_windows_close, pipe_windows_read) |
| (pipe_windows_write, pipe_wait_handle): New functions. |
| (_initialize_ser_windows): Register a "pipe" interface based on |
| them. |
| |
| 2006-04-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * ser-mingw.c: Include <conio.h>. |
| (struct ser_console_state, struct net_windows_state): Add exit_select, |
| have_stopped, thread. |
| (pipe_select_thread, console_select_thread) |
| (net_windows_select_thread): Don't create a local state copy or |
| close stop_select. Exit on exit_select instead of stop_select. Set |
| have_stopped. |
| (console_select_thread): Don't report control keypresses as pending |
| input. |
| (pipe_select_thread): Allow stop_select to interrupt sleeping. |
| (set_console_wait_handle): Create exit_select and have_stopped. |
| Save the thread handle. Check _kbhit before starting a thread. |
| (ser_console_done_wait_handle): New. |
| (ser_console_close): Close new handles. Wait for the thread to |
| exit. |
| (new_windows_select_thread): Assert that an event occurred. |
| (net_windows_wait_handle): Check for pending input before starting |
| a thread. |
| (net_windows_done_wait_handle): New. |
| (net_windows_open): Create exit_select and have_stopped. |
| Save the thread handle. |
| (net_windows_close): Close new handles. Wait for the thread to |
| exit. |
| (_intiialize_ser_windows): Register done_wait_handle methods. |
| |
| * serial.c [USE_WIN32API] (serial_done_wait_handle): New. |
| * serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle. |
| [USE_WIN32API] (serial_done_wait_handle): New prototype. |
| * mingw-hdep.c (gdb_select): Use serial_done_wait_handle. |
| |
| 2006-04-23 Andreas Schwab <schwab@suse.de> |
| |
| * rs6000-tdep.c: Include "reggroups.h" only once. |
| * Makefile.in (rs6000-tdep.o): Update dependencies. |
| |
| 2006-04-21 Frederic Riss <frederic.riss@st.com> |
| |
| * dwarf2read.c (dwarf2_start_subfile): Change prototype to accept |
| compilation directory as last argument. |
| Always pass comp_dir as second argument to start_subfile and prepend |
| dirname to the filename when necessary. |
| Remove now superfluous search for pre-existing subfile. |
| (dwarf_decode_lines): Pass the compilation directory to |
| dwarf2_start_subfile. |
| |
| 2006-04-20 Michael Snyder <msnyder@redhat.com> |
| |
| * 2006-03-22 Jim Blandy <jimb@redhat.com> |
| Add support for the Renesas M32C and M16C. |
| |
| * configure.tgt (m32c-*-*): New entry. |
| * config/m32c/m32c.mt: New file. |
| * m32c-tdep.c: New file. |
| * Makefile.in (elf_m32c_h): New variable. |
| (m32c-tdep.o): New rule. |
| * NEWS: Mention new target. |
| * MAINTAINERS: Designate Jim Blandy as responsible maintainer. |
| |
| 2006-04-20 Michael Snyder <msnyder@redhat.com> |
| |
| * remote.c: Fix spelling error in comment. |
| |
| 2006-04-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * m68klinux-tdep.c (m68k_linux_sigtramp_frame_prev_register): |
| Correct type of VALUEP. Reported by Jean-Rene Peulve |
| <jr.peulve@wanadoo.fr>. |
| |
| 2006-04-19 Masaki Muranaka <monaka@monami-software.com> |
| |
| * m32r-rom.c: On MinGW, include winsock.h instead of sys/types.h, |
| netdb.h, netinet/in.h. |
| (m32r_upload_command); Add calls WSAStartup(). |
| * remote-m32r-sdi.c: On MinGW, include winsock.h instead of |
| netinet/in.h. |
| |
| 2006-04-18 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * breakpoint.c (deprecated_read_memory_nobpt): Update to use |
| shadow_len. |
| (insert_bp_location, reattach_breakpoints, remove_breakpoint) |
| (delete_breakpoint): Update calls to changed methods. |
| (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) |
| (single_step_breakpoints, insert_single_step_breakpoint) |
| (remove_single_step_breakpoints): New. |
| * breakpoint.h (struct bp_target_info): New. |
| (struct bp_location): Replace shadow_contents with |
| target_info and overlay_target_info. |
| (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) |
| (insert_single_step_breakpoint, remove_single_step_breakpoints): New |
| prototypes. |
| * gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h. |
| (memory_insert_breakpoint, memory_remove_breakpoint): Update second |
| argument. |
| * mem-break.c (default_memory_insert_breakpoint): Update. Set |
| placed_address, placed_size, and shadow_len. |
| (default_memory_remove_breakpoint): Update. Don't use |
| BREAKPOINT_FROM_PC. |
| (memory_insert_breakpoint, memory_remove_breakpoint): Update. |
| * target.c (update_current_target): Update prototypes for changed |
| functions. |
| (debug_to_insert_breakpoint, debug_to_remove_breakpoint) |
| (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): |
| Update. |
| * target.h: Forward declare struct bp_target_info. |
| (struct target_ops): Use a bp_target_info argument for |
| to_insert_breakpoint, to_remove_breakpoint, |
| to_insert_hw_breakpoint, and to_remove_hw_breakpoint. |
| (target_insert_breakpoint, target_remove_breakpoint) |
| (target_insert_hw_breakpoint, target_remove_hw_breakpoint) |
| (memory_insert_breakpoint, memory_remove_breakpoint) |
| (default_memory_insert_breakpoint, default_memory_remove_breakpoint): |
| Update. |
| * config/i386/nm-i386.h: Forward declare struct bp_target_info. |
| (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. |
| (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise. |
| |
| * gdbarch.c, gdbarch.h: Regenerated. |
| |
| * alpha-tdep.c (alpha_software_single_step): Use |
| insert_single_step_breakpoint and remove_single_step_breakpoints. |
| Remove unused statics. |
| * arm-tdep.c (arm_software_single_step): Likewise. Add a note. |
| * cris-tdep.c (cris_software_single_step): Likewise. |
| * mips-tdep.c (mips_software_single_step): Likewise. |
| * rs6000-tdep.c (rs6000_software_single_step): Likewise. |
| * sparc-tdep.c (sparc_software_single_step): Likewise. |
| * wince.c (struct thread_info_struct): Remove step_prev. |
| (undoSStep): Use remove_single_step_breakpoints. |
| (wince_software_single_step): Use insert_single_step_breakpoint. |
| |
| * corelow.c (ignore): Remove unneeded prototype. Update arguments. |
| * exec.c (ignore): Likewise. |
| * sol-thread.c (ignore): Likewise. |
| |
| * procfs.c (dbx_link_shadow_contents): Delete. |
| (dbx_link_bpt): New. |
| (procfs_mourn_inferior): Remove it if necessary. |
| (remove_dbx_link_breakpoint): Use it. |
| (insert_dbx_link_bpt_in_file): Set it. |
| (procfs_init_inferior): Don't update dbx_link_bpt_addr. |
| * rs6000-nat.c (exec_one_dummy_insn): Use |
| deprecated_insert_raw_breakpoint and |
| deprecated_remove_raw_breakpoint. |
| * solib-irix.c (shadow_contents, breakpoint_addr): Delete. |
| (base_breakpoint): New. |
| (disable_break): Use it. |
| (enable_break): Set it. |
| |
| * i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): |
| Update. |
| * ia64-tdep.c (ia64_memory_insert_breakpoint) |
| (ia64_memory_remove_breakpoint): Likewise. |
| * m32r-tdep.c (m32r_memory_insert_breakpoint) |
| (m32r_memory_remove_breakpoint): Likewise. |
| * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): |
| Likewise. Remove unnecessary prototypes. Use placed_address |
| and placed_size. Removed useless read from memory. |
| * nto-procfs.c (procfs_insert_breakpoint) |
| (procfs_remove_breakpoint, procfs_insert_hw_breakpoint) |
| (procfs_remove_hw_breakpoint): Update. |
| * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. |
| * ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. |
| * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. |
| * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise. |
| * remote-e7000.c (e7000_insert_breakpoint) |
| (e7000_remove_breakpoint): Likewise. |
| * remote-m32r-sdi.c (m32r_insert_breakpoint) |
| (m32r_remove_breakpoint): Likewise. |
| * remote-mips.c (mips_insert_breakpoint) |
| (mips_remove_breakpoint): Likewise. |
| * remote-rdp.c (remote_rdp_insert_breakpoint) |
| (remote_rdp_remove_breakpoint): Likewise. |
| (rdp_step): Use deprecated_insert_raw_breakpoint and |
| deprecated_remove_raw_breakpoint. |
| * remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint): |
| Update. |
| * remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint): |
| Delete. |
| (init_gdbsim_ops): Use memory_insert_breakpoint and |
| memory_remove_breakpoint. |
| * remote-st.c (st2000_insert_breakpoint) |
| (st2000_remove_breakpoint): Update. Remove unused |
| BREAKPOINT_FROM_PC. |
| * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): |
| Update. Use placed_address and placed_size. |
| (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. |
| |
| 2006-04-12 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (extended_remote_restart): Pass the correct length |
| to getpkt. |
| |
| 2006-04-11 Jim Blandy <jimb@codesourcery.com> |
| |
| * serial.c (serial_open): Check for special cases at the front of |
| the "device" name before scanning for the ':' that would indicate |
| an IP-based connection. |
| |
| 2006-04-10 Christopher Faylor <cgf@timesys.com> |
| |
| * win32-nat.c (open_symbol_file_object): New function. |
| (in_dynsym_resolve_code): Ditto. |
| (init_win32_ops): Fill in fields which ought not to be NULL. |
| |
| 2006-04-10 Christopher Faylor <cgf@timesys.com> |
| |
| * win32-nat.c (do_win32_fetch_inferior_registers): Don't do anything |
| with saved context if __COPY_CONTEXT_SIZE is not defined. |
| (handle_output_debug_string): Ditto. |
| |
| 2006-04-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-linux-tdep.c (arm_linux_extract_return_value): Use gdb_byte. |
| |
| 2006-04-09 David S. Miller <davem@sunset.davemloft.net> |
| |
| * sparc64-linux-tdep.c (sparc64_linux_init_abi): Append dwarf2 |
| frame sniffer. |
| * sparc-tdep.c (sparc32_gdbarch_init): Make sure to call |
| dwarf2_frame_set_init_reg() before gdbarch_init_osabi() so |
| that the latter can override. |
| * Makefile.in (sparc64-linux-tdep.o): Update dependencies. |
| |
| 2006-04-09 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * s390-tdep.c (struct s390_prologue_data): New field 'stack'. |
| (s390_store): Call pv_area_store to track stack slots. |
| (s390_load): Call pv_area_fetch to track stack slots. |
| (s390_check_for_saved): New function. |
| (s390_analyze_prologue): Call pv_area_scan. Allocate and free stack. |
| |
| 2006-04-09 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * Makefile.in (s390-tdep.o): Add dependency on $(prologue_value_h). |
| * s390-tdep.c: Include "prologue-value.h". |
| (struct prologue_value): Remove. |
| (pv_set_to_unknown, pv_set_to_constant, pv_set_to_register, |
| pv_constant_last, pv_add, pv_add_constant, pv_subtract, |
| pv_logical_and, pv_is_identical, pv_is_register): Remove. |
| (compute_x_addr): Remove, replace by ... |
| (s390_addr): ... this new function. |
| (struct s390_prologue_data): Use pv_t instead of prologue_value. |
| (s390_store, s390_load): Likewise. |
| (s390_prologue_frame_unwind_cache): Likewise. |
| (s390_analyze_prologue): Likewise. Also, simplify and combine |
| several conditional statements. |
| |
| 2006-04-08 Jim Blandy <jimb@codesourcery.com> |
| |
| * Makefile.in (COMMON_OBS): List prologue-value.o. (Omitted from |
| last patch.) |
| |
| 2006-04-08 David S. Miller <davem@sunset.davemloft.net> |
| |
| * sparc-linux-tdep.c (sparc32_linux_step_trap): New. |
| (sparc32_linux_init_abi): Hook it into tdep->step_trap. |
| (sparc32_linux_core_gregset, |
| sparc32_linux_supply_core_gregset, |
| sparc32_linux_collect_core_gregset, |
| sparc32_linux_supply_core_fpregset, |
| sparc32_linux_collect_core_fpregset): New. |
| (sparc32_linux_init_abi): Register them with generic sparc |
| core regset infrastructure. |
| * sparc64-linux-tdep.c (sparc64_linux_step_trap): New. |
| (sparc64_linux_init_abi): Hook it into tdep->step_trap. |
| (sparc64_linux_core_gregset, |
| sparc64_linux_supply_core_gregset, |
| sparc64_linux_collect_core_gregset, |
| sparc64_linux_supply_core_fpregset, |
| sparc64_linux_collect_core_fpregset): New. |
| (sparc64_linux_init_abi): Register them with generic sparc |
| core regset infrastructure. |
| * Makefile.in: Update dependencies. |
| |
| 2006-04-07 David S. Miller <davem@sunset.davemloft.net> |
| |
| * linux-nat.c (linux_nat_thread_alive): Handle targets that |
| do not implement PTRACE_PEEKUSER. |
| |
| 2006-04-07 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (remote_wait): Convert warning to error before |
| parsing corrupt packets. |
| |
| 2006-04-07 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * cli/cli-script.c (struct user_args): Add command field. |
| (arg_cleanup): Free command string. |
| (setup_user_args): Copy the command line before relying on it. |
| |
| 2006-04-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * breakpoint.c (_initialize_breakpoint): Add "del" as an alias |
| of the "delete" command. |
| |
| 2006-04-06 Randolph Chung <tausq@debian.org> |
| |
| * MAINTAINERS (Patch champions): Add myself. |
| |
| 2006-04-05 Andreas Schwab <schwab@suse.de> |
| |
| * Makefile.in: Update dependencies. |
| |
| 2006-04-05 David S. Miller <davem@sunset.davemloft.net> |
| |
| * sparc-tdep.c (sparc32_dwarf2_frame_init_reg): New. |
| (sparc32_gdbarch_init): Pass it to dwarf2_frame_set_init_reg. |
| * Makefile.in (sparc-tdep.o): Update dependencies. |
| * sparc-linux-tdep.c (sparc32_linux_sigframe_init): Pull register |
| window out of the correct stack frame. |
| * sparc64-linux-tdep.c (sparc64_linux_sigframe_init): Likewise. |
| * dwarf2-frame.c (dwarf2_frame_ops init_reg): Add "next_frame" |
| argument. |
| (dwarf2_frame_default_init_reg): Likewise. |
| (dwarf2_frame_set_init_reg): Update init_reg arg. |
| (dwarf2_frame_init_reg): Take "next_frame" and pass it to |
| ops->init_reg(). |
| (dwarf2_frame_cache): Pass next_frame to dwarf2_frame_init_reg. |
| * dwarf2-frame.h (dwarf2-frame_set_init_reg): Update declaration. |
| * cris-tdep.c (cris_dwarf2_frame_init_reg): Add next_frame arg. |
| * s390-tdep.c (s390_dwarf2_frame_init_reg): Likewise. |
| * sh-tdep.c (sh_dwarf2_frame_init_reg): Likewise. |
| * sparc64-tdep.c (sparc64_dwarf2_frame_init_reg): Likewise. |
| * sparc-tdep.c (sparc32_struct_return_from_sym): New function. |
| (sparc32_frame_cache): Call it. |
| (sparc32_dwarf2_struct_return_p): New function. |
| (sparc_dwarf2_frame_init_reg): Use it to determine if the function |
| returns a structure and thus we have to indicate the return PC and |
| NPC are 4 bytes later than usual. |
| * sparc-linux-tdep.c (sparc32_linux_init_abi): Append |
| dwarf2 frame sniffer. |
| * Makefile.in (sparc-linux-tdep.o): Update dependencies. |
| |
| 2006-04-04 David S. Miller <davem@davemloft.net> |
| |
| * config/linux.mh (NATDEPFILES): Remove sparc-sol2-nat.o |
| * config/linux64.h (NATDEPFILES): Likewise |
| * sparc-linux-nat.c (supply_gregset, supply_fpregset, fill_gregset, |
| fill_fpregset): New. |
| * sparc64-linux-nat.c (supply_gregset, supply_fpregset, fill_gregset, |
| fill_fpregset): New. |
| * Makefile.in (sparc-linux-nat.o, sparc64-linux-nat.o): Update for |
| new includes. |
| |
| 2006-04-04 Andreas Schwab <schwab@suse.de> |
| |
| * Makefile.in (elf_common_h): Define. |
| |
| 2006-04-03 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * sh-tdep.c (sh_dwarf2_frame_init_reg): New function. |
| (sh_gdbarch_init): Call dwarf2_frame_set_init_reg(). |
| |
| 2006-03-31 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * value.h (struct internalvar): Add field 'endian'. |
| * value.c (lookup_internalvar): Initialise endian. |
| (value_of_internalvar): Flip the endian of built-in types if required. |
| (set_internalvar): Set the endian. |
| (show_convenience): Access the value through value_of_internalvar(). |
| |
| 2006-03-30 Vladimir Prus <ghost@cs.msu.su> |
| |
| * remote.c (watchpoint_to_Z_packet): Use values of Z_packet_type enum |
| instead of hardcoded integer literals. |
| |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * cli/cli-script.c (insert_args): Handle NULL user_args. |
| |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-tdep.c (thumb_scan_prologue): Don't try to analyze |
| the function at zero if we have no symbols. |
| |
| 2006-03-30 Adrien Kunysz <a_kunysz@yahoo.com> |
| |
| * i386-stub.c (getpacket): Fix array overflow. |
| * m32r-stub.c (getpacket): Likewise. |
| * m68k-stub.c (getpacket): Likewise. |
| * sh-stub.c (getpacket): Likewise. |
| * sparc-stub.c (getpacket): Likewise. |
| |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * frame.h (set_current_sal_from_frame): New prototype. |
| * stack.c (set_current_sal_from_frame): Make global. |
| * infrun.c (normal_stop): Call set_current_sal_from_frame. |
| |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-thread-db.c: Include "linux-nat.h". |
| (check_for_thread_db): New function, split out from |
| thread_db_new_objfile. Remove dead check for active |
| thread_db on inapplicable targets. |
| (thread_db_new_objfile): Call check_for_thread_db. |
| * Makefile.in (linux-thread-db.o): Update. |
| * linux-nat.c (child_post_attach): Call check_for_thread_db. |
| (linux_child_post_startup_inferior): Likewise. |
| (lin_lwp_attach_lwp): Call target_post_attach instead of |
| child_post_attach. |
| * linux-nat.h (check_for_thread_db): New prototype. |
| |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (struct remote_state): Add BUF and BUF_SIZE. |
| (init_remote_state): Initialize the new fields. |
| (get_memory_packet_size): Update BUF and BUF_SIZE if necessary. |
| (set_thread, remote_thread_alive, remote_unpack_thread_info_response) |
| (remote_get_threadinfo, parse_threadlist_response) |
| (remote_get_threadlist, remote_current_thread, remote_threads_info) |
| (remote_threads_extra_info, extended_remote_restart, get_offsets) |
| (remote_check_symbols, remote_open_1, remote_detach) |
| (remove_vcont_probe, remote_vcont_resume, remote_resume) |
| (remote_wait, remote_async_wait, fetch_register_using_p) |
| (remote_fetch_registers, store_register_using_P) |
| (remote_store_registers, check_binary_download, remote_write_bytes) |
| (remote_read_bytes, remote_insert_breakpoint) |
| (remote_remove_breakpoint, remote_insert_watchpoint) |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) |
| (remote_remove_hw_breakpoint, compare_sections_command) |
| (remote_xfer_partial, remote_rcmd, packet_command) |
| (remote_get_thread_local_address): Use the global incoming buffer |
| instead of alloca or xmalloc. Limit outgoing packets to |
| rs->remote_packet_size and incoming packets to rs->buf_size. |
| Update calls to getpkt and remote_send. |
| (remote_send): Take arguments by reference. |
| (putpkt_binary): Eliminate junkbuf. Use skip_frame. |
| (skip_frame): New function. |
| (read_frame): Take arguments by reference. Expand the packet |
| buffer instead of issuing an error. |
| (getpkt, getpkt_sane): Take arguments by reference. |
| * remote.h (getpkt): Update prototype and doc. |
| * tracepoint.c (remote_get_noisy_reply): Take arguments by |
| reference. |
| (target_buf): Change from array to pointer. |
| (target_buf_size): New variable. |
| (remote_set_transparent_ranges): Update call to getpkt. |
| (trace_start_command, trace_stop_command, trace_status_command): |
| Update calls to remote_get_noisy_reply. |
| (finish_tfind_command): Take arguments by reference. |
| (trace_find_command, trace_find_pc_command) |
| (trace_find_tracepoint_command, trace_find_line_command): |
| (trace_find_range_command, trace_find_outside_command): Update |
| calls to finish_tfind_command. |
| (_initialize_tracepoint): Initialize target_buf_size and target_buf. |
| |
| 2005-03-30 Randolph Chung <tausq@debian.org> |
| |
| * hppa-linux-tdep.c: Include regset.h. |
| (GR_REGNUM, TR_REGNUM, greg_map): New. |
| (hppa_linux_supply_regset, hppa_linux_supply_fpregset): New. |
| (hppa_linux_regset, hppa_linux_fpregset): New. |
| (hppa_linux_regset_from_core_section): New. |
| (hppa_linux_init_abi): Set regset_from_core_section. |
| (_initialize_hppa_linux_tdep): Register osabi handler for |
| 64-bit Linux. |
| * Makefile.in (hppa-linux-tdep.o): Update dependencies. |
| * config/pa/linux.mh: Stop using core-regset.o |
| |
| 2006-03-30 Randolph Chung <tausq@debian.org> |
| |
| * hppa-tdep.c (hppa_find_unwind_entry_in_block): New. |
| (hppa_frame_cache): Use new function to find unwind entry. |
| (hppa_frame_this_id): Likewise. |
| (hppa_frame_unwind_sniffer): Likewise. |
| |
| 2006-03-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * NEWS: Mention the removal of NLM. |
| |
| 2006-03-29 Steve Ellcey <sje@cup.hp.com> |
| |
| * Makefile.in (nlm): Remove target. |
| * configure.tgt (i[34567]86-*-netware*): Do not set build_nlm. |
| * configure.ac: Remove AC_CONFIG_SUBDIRS of nlm. |
| * configure: Regenerate. |
| * doc/gdb.texinfo: Remove gdbserve.nlm documentation. |
| * nlm: Remove directory. |
| |
| 2006-03-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (utils.o): Update. |
| * top.c (in_user_command): New. |
| (command_line_input): Use input_from_terminal_p. |
| (input_from_terminal_p): Don't check caution. Handle |
| stdin == NULL for Insight. |
| * top.h (in_user_command, caution): New declarations. |
| * utils.c: Include "top.h". |
| (query, defaulted_query): Check caution here. Move the call |
| to input_from_terminal_p higher. |
| * cli/cli-script.c (do_restore_user_call_depth): Only decrement |
| the depth. Update in_user_command if necessary. |
| (execute_user_command): Don't clobber old_chain. Set |
| in_user_command. Let do_restore_user_call_depth handle |
| user_call_depth. |
| (read_command_lines): Check whether to prompt before calling |
| Insight hooks. |
| * tui/tui-hooks.c (tui_query_hook): Remove newly unnecessary |
| input_from_terminal_p check. |
| |
| 2006-03-29 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * s390-nat.c (s390_insert_watchpoint): Add missing argument. |
| (s390_remove_watchpoint): Likewise. |
| |
| 2006-03-28 Jim Blandy <jimb@codesourcery.com> |
| |
| * prologue-value.c, prologue-value.h: New files. |
| * Makefile.in (prologue_value_h): New variable. |
| (HFILES_NO_SRCDIR): List prologue-value.h. |
| (SFILES): List prologue-value.c. |
| (COMMON_OBS): List prologue-value.o. |
| (prologue-value.o): New rule. |
| |
| 2006-03-27 Michael Snyder <msnyder@redhat.com> |
| |
| * xstormy16-tdep.c (xstormy16_return_value, xstormy16_push_dummy_call, |
| xstormy16_pointer_to_address, xstormy16_address_to_pointer, |
| xstormy16_frame_prev_register): Change void* to gdb_byte*. |
| (xstormy16_push_dummy_call): Add block-local char* val, |
| to avoid type conflict with outer scope variable. |
| |
| 2006-03-27 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * sh-tdep.c (sh_gdbarch_init): Add missing architectures. |
| |
| 2006-03-27 Nick Roberts <nickrob@snap.net.nz> |
| |
| * varobj.c (c_name_of_child, c_value_of_child): Allow non-zero |
| offsets for languages like Fortran. |
| |
| 2006-03-26 Randolph Chung <tausq@debian.org> |
| |
| * config/pa/hppa64.mt: Use HPUX version of the tm file. |
| |
| 2006-03-25 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/gdb-mi.el (gdbmi-send): Improve regexp to repeat commands. |
| Try to deal with continuation line. |
| (gdbmi, gdbmi-prompt1, gud-gdbmi-marker-filter): Update to new |
| variable names. |
| (gdb-break-list-regexp, gdb-stack-list-frames-regexp): |
| Future proof against new fields being added to MI output. |
| (gdbmi-prompt2, gdb-break-list-handler,gdb-get-source-file) |
| (gdbmi-frame-handler): Update to new variable name |
| gdb-get-buffer-create. |
| (gdbmi-frame-handler): Use hollow-right-triangle for all selected |
| frames which except the innermost (where execution has stopped). |
| |
| 2006-03-24 Randolph Chung <tausq@debian.org> |
| |
| * solib-som.c (link_map_start): Don't error out if there is |
| not yet a link map. |
| |
| 2006-03-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-nat.c (linux_ops_saved): New. |
| (super_mourn_inferior, kill_inferior, threaded, linux_nat_ops) |
| (child_mourn_inferior, child_wait, linux_nat_create_inferior) |
| (linux_nat_fetch_registers, linux_nat_store_registers) |
| (linux_nat_child_post_startup_inferior, init_linux_nat_ops): Delete. |
| (init_lwp_list): Don't set threaded. |
| (add_lwp): Don't modify threaded. |
| (delete_lwp): Don't mention non-threaded mode. |
| (linux_nat_switch_fork): New. |
| (linux_nat_attach): Update inferior_ptid. |
| (linux_nat_wait): Handle num_lwps == 0 at entry. Don't check |
| threaded flag. |
| (linux_nat_kill): Handle pending forks and saved forks. |
| (linux_nat_mourn_inferior): Handle saved forks. |
| (linux_nat_pid_to_str): Don't use the LWP form when there is |
| only one thread. |
| (linux_target): Don't set to_wait, to_kill, or to_mourn_inferior. |
| (linux_nat_add_target): New. |
| (_initialize_linux_nat): Don't initialize the linux native target |
| here. |
| * linux-nat.h (linux_nat_add_target, linux_nat_switch_fork): New |
| prototypes. |
| * linux-fork.c: Include "linux-nat.h". |
| (add_fork): Update initial PID. |
| (fork_load_infrun_state): Call linux_nat_switch_fork. |
| * Makefile.in (linux-fork.o): Update. |
| |
| * alpha-linux-nat.c (_initialize_alpha_linux_nat): Use |
| linux_nat_add_target instead of add_target. |
| * amd64-linux-nat.c (_initialize_amd64_linux_nat): Likewise. |
| * arm-linux-nat.c (_initialize_arm_linux_nat): Likewise. |
| * hppa-linux-nat.c (_initialize_hppa_linux_nat): Likewise. |
| * ia64-linux-nat.c (_initialize_ia64_linux_nat): Likewise. |
| * i386-linux-nat.c (_initialize_i386_linux_nat): Likewise. |
| * m32r-linux-nat.c (_initialize_m32r_linux_nat): Likewise. |
| * m68klinux-nat.c (_initialize_m68k_linux_nat): Likewise. |
| * mips-linux-nat.c (_initialize_mips_linux_nat): Likewise. |
| * ppc-linux-nat.c (_initialize_ppc_linux_nat): Likewise. |
| * s390-nat.c (_initialize_s390_nat): Likewise. |
| * sparc-linux-nat.c (_initialize_sparc_linux_nat): Likewise. |
| * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Likewise. |
| |
| 2006-03-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-fork.c: Include "gdb_assert.h". |
| (fork_load_infrun_state): Set inferior_ptid and stop_pc here. |
| Update the register cache and selected frame also. |
| (linux_fork_mourn_inferior): Use fork_load_infrun_state. Return |
| to single fork mode if necessary. |
| (linux_fork_context): Remove bits handled by fork_load_infrun_state. |
| * Makefile.in (linux_fork_h): New. |
| (linux-fork.o, linux-nat.o): Update. |
| |
| 2006-03-23 Andreas Schwab <schwab@suse.de> |
| |
| * config/s390/s390.mh (NATDEPFILES): Add linux-fork.o. |
| |
| 2006-03-18 Jim Blandy <jimb@codesourcery.com> |
| |
| * symtab.h (enum address_class): Doc fix. |
| |
| 2006-03-16 Michael Snyder <msnyder@redhat.com> |
| |
| * tracepoint.c (tracepoint_save_command): Fix typo in error msg. |
| * target.c (push_target): Fix typo in comment. |
| * remote.c (remote_watch_data_address): Fix typo in comment. |
| * i386-tdep.c (i386_push_dummy_call): Fix typo in comment. |
| |
| 2006-03-15 Kevin Buettner <kevinb@redhat.com> |
| |
| * frv-linux-tdep.c (gdbcore.h, regcache.h, regset.h, gdb_string.h): |
| Include. |
| (FRV_ELF_NGREG, FRV_PT_PSR, FRV_PT_ISR, FRV_PT_CCR, FRV_PT_CCCR) |
| (FRV_PT_LR, FRV_PT_LCR, FRV_PT_PC, FRV_PT_GNER0, FRV_PT_GNER1) |
| (FRV_PT_IACC0H, FRV_PT_IACC0L, FRV_PT_GR, FRV_PT_TBR) |
| (FRV_PT_EXEC_FDPIC_LOADMAP, FRV_PT_INTERP_FDPIC_LOADMAP): Define. |
| (frv_elf_greg_t, frv_elf_gregset_t, frv_elf_fpreg_t) |
| (frv_elf_fpregset_t): Define types. |
| (frv_linux_supply_gregset, frv_linux_supply_fpregset) |
| (frv_linux_regset_from_core_section: New functions. |
| (frv_linux_gregset, frv_linux_fpregset): New static globals. |
| (frv_linux_init_abi): Register the `regset_from_core_section' method. |
| * Makefile.in (frv-linux-tdep.o): Update dependencies. |
| * solib-frv.c (frv_current_sos): Relocate main executable after |
| loading core file. |
| (frv_clear_solib): Clean up space associated with |
| `main_executable_lm_info'. |
| * config/frv/frv.mt (TDEPFILES): Add corelow.o to this list. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (mips_linux_tdep_h): New. |
| (mpis-linux-nat.o, mips-linux-tdep.o): Update. |
| * mips-linux-nat.c: Include "inferior.h", "mips-linux-tdep.h", and |
| <sys/ptrace.h>. |
| (have_ptrace_regsets, super_fetch_registers, super_store_registers) |
| (mips64_linux_regsets_fetch_registers) |
| (mips64_linux_regsets_store_registers, mips64_linux_fetch_registers) |
| (mips64_linux_store_registers): New. |
| (_initialize_mips_linux_nat): Override to_fetch_registers and |
| to_store_registers. |
| * mips-linux-tdep.h: New file. |
| * mips-linux-tdep.c: Include "mips-linux-tdep.c". |
| (ELF_NGREG, ELF_NFPREG, elf_greg_t, elf_gregset_t, elf_fpreg_t) |
| (elf_fpregset_t, FPR_BASE, PC, CAUSE, BADVADDR, MMHI, MMLO) |
| (FPC_CSR, FPC_EIR, EF_REG0, EF_REG31, EF_LO, EF_HI, EF_CP0_EPC) |
| (EF_CP0_BADVADDR, EF_CP0_STATUS, EF_CP0_CAUSE, EF_SIZE) |
| (MIPS64_ELF_NGREG, MIPS64_ELF_NFPREG, mips64_elf_greg_t) |
| (mips64_elf_gregset_t, mips64_elf_fpreg_t, mips64_elf_fpregset_t) |
| (MIPS64_FPR_BASE, MIPS64_PC, MIPS64_CAUSE, MIPS64_BADVADDR) |
| (MIPS64_MMHI, MIPS64_MMLO, MIPS64_FPC_CSR, MIPS64_FPC_EIR) |
| (MIPS64_EF_REG0, MIPS64_EF_REG31, MIPS64_EF_LO, MIPS64_EF_HI) |
| (MIPS64_EF_CP0_EPC, MIPS64_EF_CP0_BADVADDR, MIPS64_EF_CP0_STATUS) |
| (MIPS64_EF_CP0_CAUSE, MIPS64_EF_SIZE): Delete. |
| (supply_32bit_reg): Use gdb_byte. |
| (supply_64bit_reg): New. |
| (mips_supply_gregset, mips_fill_gregset, mips_supply_fpregset) |
| (mips_fill_fpregset, fetch_core_registers, supply_gregset) |
| (fill_gregset, supply_fpregset): Update for renamed types. |
| (mips64_supply_gregset): Use gdb_byte and supply_64bit_reg. |
| (mips64_fill_gregset): Make global. Handle 32-bit register |
| sizes. |
| (mips64_fill_fpregset): Make global. Use gdb_byte. Handle |
| FP regsets properly. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-linux-tdep.c (mips_supply_gregset): Renamed from supply_gregset. |
| (mips_fill_gregset): Renamed from fill_gregset. |
| (mips_supply_fpregset): Renamed from supply_fpregset. |
| (mips_fill_fpregset): Renamed from fill_fpregset. |
| (fetch_core_registers): Update calls. |
| (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): New |
| functions. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-tdep.c (mips_gdbarch_init): Default 64-bit ELF files to N64. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-tdep.c (is_mips16_addr, mips32_next_pc, add_offset_16): |
| Correct arithmetic for 64-bit CORE_ADDR. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-linux-tdep.c: Include "floatformat.h". |
| (mips_linux_init_abi): Use 128-bit long double for N32 and N64. |
| * mips-tdep.c (mips_n32n64_return_value): Support 128-bit long |
| double. |
| (print_gp_register_row): Don't print spaces before ignored |
| or floating point registers. |
| * Makefile.in (mips-linux-tdep.o): Update. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-mdebug-tdep.c (compare_pdr_entries): Use bfd_get_signed_32 |
| for code addresses. |
| (non_heuristic_proc_desc): Likewise. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-linux-nat.c: Include "gdb_proc_service.h". |
| (PTRACE_GET_THREAD_AREA): Define. |
| (ps_get_thread_area): New. |
| * Makefile.in (mips-linux-nat.o): Update. |
| |
| 2006-03-13 Jim Blandy <jimb@codesourcery.com> |
| |
| * MAINTAINERS: Use my work address. |
| |
| 2006-03-09 Michael Snyder <msnyder@redhat.com> |
| |
| * linux-nat.c (kill_inferior): Just call target_mourn_inferior |
| instead of getting tricky for the multi-fork case. |
| * linux-fork.c (linux_fork_killall): Call PT_KILL and waitpid |
| for each fork, and then use init_fork_list to delete them. |
| |
| 2006-03-08 Alexandre Oliva <aoliva@redhat.com> |
| |
| * solib-svr4.c (svr4_current_sos): Move up initialization of |
| l_addr, such that it clearly covers all cases. |
| |
| 2006-03-08 Andreas Schwab <schwab@suse.de> |
| |
| * ia64-tdep.c (ia64_libunwind_frame_this_id): Adapt use of |
| libunwind_frame_prev_register to use a gdb_byte buffer and |
| extract_unsigned_integer. |
| (ia64_libunwind_sigtramp_frame_prev_register): Likewise. |
| |
| * libunwind-frame.c (libunwind_frame_prev_register): Change type |
| of last argument to `gdb_byte *' |
| * libunwind-frame.h: Adjust declaration. |
| |
| 2006-03-08 Paul Brook <paul@codesourcery.com> |
| |
| * arm-tdep.c (arm_push_dummy_call): Remove stack alignment. |
| (arm_frame_align): New function. |
| (arm_gdbarch_init): Use it. |
| |
| 2006-03-03 Khem Raj <khem@mvista.com> |
| |
| * remote-rdp.c (remote_rdp_xfer_inferior_memory): Use gdb_byte. |
| Committed by Andrew Cagney. |
| |
| 2006-03-02 Corinna Vinschen <vinschen@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_push_dummy_call): Write breakpoint |
| address to MDR register. |
| |
| 2006-03-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdbtypes.c (lookup_struct_elt_type): Correct noerr for recursive |
| calls. |
| |
| 2006-03-01 Randolph Chung <tausq@debian.org> |
| |
| * somread.c (som_symfile_read): Update comment and remove unneeded |
| use of a deprecated variable. |
| |
| 2006-03-01 Randolph Chung <tausq@debian.org> |
| |
| * hppa-tdep.h (unwind_table_entry): Update field names to match HP |
| runtime specification. |
| * hppa-tdep.c (internalize_unwinds, hppa_frame_cache): Likewise. |
| (unwind_command): Likewise. |
| |
| 2006-03-01 Randolph Chung <tausq@debian.org> |
| |
| * hppa-tdep.c (hppa_frame_cache): Handle Region_Description and |
| Pseudo_SP_Set in unwind record. |
| |
| 2006-03-01 Randolph Chung <tausq@debian.org> |
| |
| * hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Use |
| TDEP->is_elf to determine if we are working with a SOM binary. |
| (null_symtab_and_line): Remove unused variable. |
| * config/pa/hppa64.mt: Use tm-hppa.h. |
| * config/pa/tm-hppa64.h: Remove file. |
| |
| 2006-03-01 Wu Zhou <woodzltc@cn.ibm.com> |
| |
| * f-typeprint.c (f_type_print_base): Delete the redundant space. |
| |
| 2006-02-28 Kevin Buettner <kevinb@redhat.com> |
| |
| * Makefile.in (mn10300-linux-tdep.o): Update dependencies. |
| * mn10300-linux-tdep.c (frame.h, trad-frame.h, tramp-frame.h): |
| Include. |
| (am33_linux_sigframe_cache_init): New function. |
| (am33_linux_sigframe, am33_linux_rt_sigframe): New signal frame |
| descriptions. |
| (AM33_SIGCONTEXT_D0, AM33_SIGCONTEXT_D1, AM33_SIGCONTEXT_D2) |
| (AM33_SIGCONTEXT_D3, AM33_SIGCONTEXT_A0, AM33_SIGCONTEXT_A1) |
| (AM33_SIGCONTEXT_A2, AM33_SIGCONTEXT_A3, AM33_SIGCONTEXT_E0) |
| (AM33_SIGCONTEXT_E1, AM33_SIGCONTEXT_E2, AM33_SIGCONTEXT_E3) |
| (AM33_SIGCONTEXT_E4, AM33_SIGCONTEXT_E5, AM33_SIGCONTEXT_E6) |
| (AM33_SIGCONTEXT_E7, AM33_SIGCONTEXT_LAR, AM33_SIGCONTEXT_LIR) |
| (AM33_SIGCONTEXT_MDR, AM33_SIGCONTEXT_MCVF, AM33_SIGCONTEXT_MCRL) |
| (AM33_SIGCONTEXT_MCRH, AM33_SIGCONTEXT_MDRQ, AM33_SIGCONTEXT_SP) |
| (AM33_SIGCONTEXT_EPSW, AM33_SIGCONTEXT_PC, AM33_SIGCONTEXT_FPUCONTEXT): |
| New constants. |
| (am33_linux_init_osabi): Register signal frame unwinders. |
| |
| 2006-02-28 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_analyze_prologue): Implement backtrack |
| out of pattern match by saving relevant state. Fix stack size |
| adjustment bug. |
| |
| 2006-02-28 Alexandre Oliva <aoliva@redhat.com> |
| |
| * solib-svr4.h (struct link_map_offsets): Add l_ld_offset and |
| l_ld_size fields. |
| * solib-svr4.c (struct lm_info): Add l_addr field. |
| (LM_ADDR_FROM_LINK_MAP): Renamed from LM_ADDR. |
| (HAS_LM_DYNAMIC_FROM_LINK_MAP): New. |
| (LM_DYNAMIC_FROM_LINK_MAP): New. |
| (LM_ADDR_CHECK): New. Use it instead of LM_ADDR. |
| (svr4_current_sos): Initialize l_addr. Adjust. |
| (svr4_relocate_section_addresses): Adjust. |
| (svr4_ilp32_fetch_link_map_offsets): Define new members. |
| (svr4_lp64_fetch_link_map_offsets): Likewise. |
| * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Likewise. |
| * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Likewise. |
| (mipsnbsd_lp64_fetch_link_map_offsets): Likewise. |
| * Makefile.in (solib-svr4.o): Depend on $(elf_bfd_h). |
| |
| 2006-02-26 David S. Miller <davem@sunset.davemloft.net> |
| |
| * config/sparc/linux.mt (TDEPFILES): Add sol2-tdep.o. |
| * config/sparc/linux64.mt (TDEPFILES): Likewise. |
| |
| 2006-02-27 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Correct return type. |
| (ppc_linux_remove_watchpoint): Likewise, and args. |
| |
| 2006-02-26 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386obsd-tdep.c (i386obsd_trapframe_sniffer): Also recognize |
| "soft" interrupts. |
| |
| 2006-02-24 Charles Wilson <cygwin@cwilson.fastmail.fm> |
| |
| * gdb/defs.h: unconditionally include <fcntl.h>, and |
| ensure that O_BINARY is defined. |
| * gdb/solib.c(solib_open): ensure solib files are opened in |
| binary mode. |
| * gdb/corelow.c: Remove O_BINARY macro definition. |
| * gdb/exec.c: Remove O_BINARY macro definition |
| * gdb/remote-rdp.c: Remove O_BINARY macro definition |
| * gdb/source.c: Remove O_BINARY macro definition |
| * gdb/symfile.c: Remove O_BINARY macro definition |
| |
| 2006-02-24 Randolph Chung <tausq@debian.org> |
| |
| * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Initialize |
| argreg. |
| * solib-som.c (som_solib_remove_inferior_hook): Remove unused |
| function. |
| |
| 2006-02-24 Wu Zhou <woodzltc@cn.ibm.com> |
| |
| * f-exp.y: Symbol '%' is not used as the modulus operator in |
| Fortran. Delete this from Fortran expression. |
| It is now used by Fortran 90 and later to access the member |
| of derived type. Add this into Fortran expression. |
| * f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT. |
| Print each elements in the derived type. |
| * f-typeprint.c (print_equivalent_f77_float_type): Add a parameter |
| level into the function definition to do indented printing. And |
| call fprintfi_filtered instead to do indented printing. |
| (f_type_print_base): Replace fprintf_filtered with the indented |
| version (fprintfi_filtered). |
| (f_type_print_base): Call indented print_equivalent_f77_float_type. |
| (f_type_print_base): Add code to handle TYPE_CODE_STRUCT. Print |
| the definition of the derived type. |
| |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb_curses.h: Provide a fallback prototype for tgetnum. |
| |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * doublest.h: Conditionalize DOUBLEST on PRINTF_HAS_LONG_DOUBLE |
| also. |
| (DOUBLEST_FORMAT): Rename to DOUBLEST_PRINT_FORMAT. |
| (DOUBLEST_SCAN_FORMAT): New. |
| * ada-lex.l (PRINTF_HAS_LONG_DOUBLE): Remove redefinitions. |
| (processReal): Use DOUBLEST_SCAN_FORMAT. |
| * c-exp.y (parse_number): Likewise. |
| * jv-exp.y (parse_number): Likewise. |
| * objc-exp.y (parse_number): Likewise. |
| * p-exp.y (parse_number): Likewise. |
| |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * event-top.c (async_do_nothing, async_disconnect) |
| (async_stop_sig, async_float_handler): Remove duplicated |
| prototypes. |
| (handle_sighup): Guard prototype with SIGHUP. |
| (async_do_nothing): Guard function and prototype with |
| SIGQUIT || SIGHUP. |
| (async_disconnect): Guard prototype with SIGHUP. |
| (async_stop_sig): Guard prototype with STOP_SIGNAL. |
| |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * maint.c (maintenance_dump_me): Remove unnecessary prototype. |
| |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * win32-termcap.c (tputs): Return 0. |
| |
| 2006-02-21 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure.ac: Introduce ---enable-werror, which adds -Werror to |
| the compiler command line. Enabled by default. Disable with |
| --disable-werror. |
| * configure regenerate. |
| |
| 2006-02-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * elfread.c (elf_symtab_read): Skip symbols which BFD considers |
| special. |
| |
| 2006-02-21 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * defs.h (directory_switch): Add prototype. |
| * main.c (captured_main): Use directory_switch() instead of |
| directory_command() to add directories from the -d switch. |
| * source.c (directory_switch): New function. |
| (add_path): Use buildargv() to parse spaces in filenames properly. |
| Strip multiple trailing '/' rather than just one. |
| |
| 2006-02-21 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * symfile.c (add_symbol_file_command): Use buildargv(), instead of |
| hand decoding the command line, to allow use of quotes and spaces. |
| (_initialize_symfile): Reorganize the help message for add-symbol-file |
| such that 'help files' shows a better message. |
| |
| 2006-02-21 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * sh-tdep.c (sh_generic_show_regs): Reformat both code and output. |
| (sh3_show_regs, sh2e_show_regs, sh2a_show_regs): Likewise. |
| (sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs): Likewise. |
| (sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Likewise. |
| |
| 2006-02-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-nat.c (lin_thread_get_thread_signals): Default to __SIGRTMIN |
| and __SIGRTMIN + 1. |
| |
| 2006-02-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c: Add an enumeration for configurable remote |
| packets. |
| (remote_protocol_packets, set_remote_protocol_packet_cmd) |
| (show_remote_protocol_packet_cmd): New. |
| (remote_protocol_vcont) |
| (set_remote_protocol_vcont_packet_cmd) |
| (show_remote_protocol_vcont_packet_cmd) |
| (remote_protocol_qSymbol) |
| (set_remote_protocol_qSymbol_packet_cmd) |
| (show_remote_protocol_qSymbol_packet_cmd) |
| (remote_protocol_P, set_remote_protocol_P_packet_cmd) |
| (show_remote_protocol_P_packet_cmd) |
| (remote_protocol_Z) |
| (set_remote_protocol_Z_software_bp_packet_cmd) |
| (show_remote_protocol_Z_software_bp_packet_cmd) |
| (set_remote_protocol_Z_hardware_bp_packet_cmd) |
| (show_remote_protocol_Z_hardware_bp_packet_cmd) |
| (set_remote_protocol_Z_write_wp_packet_cmd) |
| (show_remote_protocol_Z_write_wp_packet_cmd) |
| (set_remote_protocol_Z_read_wp_packet_cmd) |
| (show_remote_protocol_Z_read_wp_packet_cmd) |
| (set_remote_protocol_Z_access_wp_packet_cmd) |
| (show_remote_protocol_Z_access_wp_packet_cmd) |
| (remote_protocol_binary_download) |
| (set_remote_protocol_binary_download_cmd) |
| (show_remote_protocol_binary_download_cmd) |
| (remote_protocol_qPart_auxv) |
| (set_remote_protocol_qPart_auxv_packet_cmd) |
| (show_remote_protocol_qPart_auxv_packet_cmd) |
| (remote_protocol_qGetTLSAddr) |
| (set_remote_protocol_qGetTLSAddr_packet_cmd) |
| (show_remote_protocol_qGetTLSAddr_packet_cmd) |
| (remote_protocol_p) |
| (set_remote_protocol_p_packet_cmd) |
| (show_remote_protocol_p_packet_cmd): Delete. |
| |
| (init_all_packet_configs): Simplify. |
| (set_remote_protocol_Z_packet_cmd) |
| (show_remote_protocol_Z_packet_cmd) |
| (remote_check_symbols, remote_vcont_probe, remote_vcont_resume) |
| (remote_fetch_registers, remote_prepare_to_store) |
| (remote_store_registers, check_binary_download) |
| (remote_write_bytes, remote_insert_breakpoint) |
| (remote_remove_breakpoint, remote_insert_watchpoint) |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) |
| (remote_remove_hw_breakpoint, remote_xfer_partial) |
| (remote_get_thread_local_address): Update for packet array. |
| (_initialize_remote): Likewise; also update for common |
| set/show commands. |
| |
| 2006-02-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * symfile.c (place_section): Correct retry logic. |
| |
| 2006-02-19 Christopher Faylor <cgf@timesys.com> |
| |
| * win32_nat.c (cygwin_load_start): New variable. |
| (cygwin_load_end): Ditto. |
| (have_saved_context): Ditto. |
| (saved_context): Ditto. |
| (max_dll_name_len): Delete obsolete variable. |
| (do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll |
| if we are in a cygwin signal rather than a windows signal. |
| (solib_symbols_add): Detect and store beginning and end of cygwin DLL |
| if dll being loaded is the cygwin DLL. |
| (register_loaded_dll): Remove calculation of max_dll_name_len. |
| (win32_clear_solib): Ditto. |
| (handle_load_dll): Delete obsolete variable. Remove unneeded call to |
| solib_add. |
| (handle_output_debug_string): Detect and store signal information sent |
| by Cygwin here. |
| (handle_exception): Silently pass on errors in the cygwin DLL. Return |
| -1 on first pass exception. |
| (win32_continue): Remove spurious clearing of continue_status. |
| (get_win32_debug_event): Deal differently first chance exception. |
| |
| 2006-02-19 Randolph Chung <tausq@debian.org> |
| |
| * hppa-tdep.c (hppa_in_solib_call_trampoline): Only use if no |
| unwind entry. |
| |
| 2006-02-16 Fred Fish <fnf@specifix.com> |
| |
| * eval.c (evaluate_subexp_standard): For OP_TYPE, return |
| a non lval value zero, of the appropriate type, when avoiding |
| side effects. |
| * typeprint.c (ptype_eval): Remove function and declaration. |
| (ptype_command): Simplify to just a call to whatis_exp. |
| |
| 2006-02-15 Paul Brook <paul@codesourcery.com> |
| |
| * arm-tdep.c (arm_skip_prologue, thumb_get_next_pc, arm_get_next_pc): |
| Load insn opcodes as unsigned values. |
| |
| 2006-02-14 Alexandre Oliva <aoliva@redhat.com> |
| |
| * doublest.h (DOUBLEST): Use long double only if we can scan |
| it in. Undefine HAVE_LONG_DOUBLE otherwise. |
| (DOUBLEST_FORMAT): New. |
| * c-exp.y (parse_number): Use it. |
| * jv-exp.y (parse_number): Likewise. |
| * objc-exp.y (parse_number): Likewise. |
| * p-exp.y (parse_number): Likewise. |
| * varobj.c (free_variable): Silence type-punning warnings. |
| * tui/tui-data.h (struct tui_list): Change type of list member. |
| * tui/tui-data.c: Remove no-longer-needed type casts. |
| (source_windows): Silence type-punning warnings. |
| * tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise. |
| |
| 2006-02-13 Mark Kettenis <kettenis@gnu.org> |
| |
| Fix PR breakpoints/2080. |
| * i386-tdep.c (struct i386_frame_cache): Add stack_align member. |
| (i386_analyze_stack_align): New function. |
| (i386_analyze_prologue): Use i386_analyze_stack_align. |
| (i386_frame_cache): Deal with stack realignment. |
| |
| 2006-02-14 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/gdb-mi.el: Use more functions from gdb-ui.el. |
| (gdb-break-list-regexp): Match "what" field if present. |
| (gdb-stack-list-frames-regexp): Match "from" field if present. |
| (gdb-stack-list-frames-handler): Present output like "info |
| breakpoints" so regexps can be shared with gdb-ui |
| |
| 2006-02-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * NEWS: Mention native Windows support. |
| * Makefile.in (gdb_select_h, ser_tcp_h): New. |
| (ALLDEPFILES): Add ser-mingw.c. |
| (event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o) |
| (ser-tcp.o, ser-unix.o): Update. |
| (ser-mingw.o): New rule. |
| * configure: Regenerated. |
| * configure.ac: Add ser-mingw.o for mingw32. |
| * ser-mingw.c: New file. |
| * event-loop.c: Include "gdb_select.h". |
| (gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c. |
| * ser-base.c: Include "gdb_select.h". |
| (ser_base_wait_for): Use gdb_select. |
| * serial.c (serial_for_fd): New function. |
| (serial_fdopen): Try "terminal" before "hardwire". Initialize |
| the allocated struct serial. |
| (serial_wait_handle): New function. |
| * serial.h (serial_for_fd, serial_wait_handle): New prototypes. |
| (struct serial_ops) [USE_WIN32API]: Add wait_handle. |
| * gdb_select.h: New file. |
| * ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include. |
| (net_close, net_read_prim, net_write_prim): Make global. |
| (net_open): Likewise. Pass an exception set to select. Whitespace fix. |
| Document why we can not use gdb_select. |
| (_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here. |
| * ser-tcp.h: New file. |
| * inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here. |
| (handle_sigio): Use gdb_select. |
| (initialize_stdin_serial): New function. |
| * terminal.h (initialize_stdin_serial): New prototype. |
| * top.c (gdb_init): Call initialize_stdin_serial. |
| * mingw-hdep.c (gdb_select): New function, moved from gdb_select in |
| event-loop.c. Add exception condition support. Use serial_for_fd |
| and serial_wait_handle. Fix timeout handling. |
| * posix-hdep.c: Include "gdb_select.h". |
| (gdb_select): New function. |
| * remote-st.c (connect_command): Use gdb_select. |
| * ser-unix.c: Include "gdb_select.h". |
| (hardwire_send_break, wait_for): Use gdb_select. |
| |
| 2006-02-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (mingw-hdep.o, posix-hdep.o): New dependencies. |
| (ALLDEPFILES): Add mingw-hdep.c and posix-hdep.c. |
| * configure.ac: Add gdb_host_obs to CONFIG_OBS. Set gdb_host_obs |
| to posix-hdep.o by default. |
| * configure: Regenerated. |
| * configure.host: Document gdb_host_obs. Add an entry for |
| i[34567]86-*-mingw32*. |
| * mingw-hdep.c, posix-hdep.c: New files. |
| * utils.c (safe_strerror): Remove, moved to posix-hdep.o. |
| |
| 2006-02-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * defs.h (gdb_osabi): New enum value GDB_OSABI_AIX. |
| * osabi.c (gdb_osabi_name): Add name of new value GDB_OSABI_AIX. |
| * rs6000-tdep.h: New file. |
| * rs6000-tdep.c: Include "rs6000-tdep.h". |
| (rs6000_gdbarch_init): Remove enabling of software single step. |
| Will be done in the AIX-specific initialization routine. |
| * rs6000-aix-tdep.c: New file. |
| * config/powerpc/aix.mt (TDEPFILES): Add rs6000-aix-tdep.o. |
| * Makefile.in (rs6000_tdep_h): New variable. |
| (rs6000-tdep.o): Update dependencies. |
| (rs6000-aix-tdep.o): New rule. |
| |
| 2006-02-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * aix-thread.c (_initialize_aix_thread): Use add_setshow_boolean_cmd |
| instead of add_setshow_zinteger_cmd to defined the aix-thread |
| boolean setting. |
| |
| 2006-02-10 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/gdb-mi.el: Update to reflect changes in Emacs 22.0.50. |
| |
| 2006-02-09 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * dwarf2read.c (struct dwarf2_per_cu_data): Reduce length to |
| 30 bits. Add load_all_dies flag. |
| (load_partial_dies): Load all DIEs if per_cu->load_all_dies is set. |
| Load DW_TAG_member by default. Remove internal_error call. |
| (find_partial_die): Reload the compilation unit if we can not find |
| a DIE in the cache. Call internal_error here if we still can not |
| find the DIE. |
| |
| 2006-02-10 Nick Roberts <nickrob@snap.net.nz> |
| |
| * breakpoint.c (print_one_breakpoint): Add break to case |
| bp_catch_vfork in switch statement. |
| |
| 2006-02-08 Wu Zhou <woodzltc@cn.ibm.com> |
| |
| * config/i386/nm-i386sol2.h: Update copyright year. |
| * config/mips/nm-irix5.h: Ditto. |
| * config/sparc/nm-sol2.h: Ditto. |
| * s390-nat.c: Ditto. |
| * ppc-linux-nat.c: Ditto. |
| |
| 2006-02-08 Wu Zhou <woodzltc@cn.ibm.com> |
| |
| * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Delete. |
| * config/i386/nm-i386sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New. |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. |
| * config/mips/nm-irix5.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New. |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. |
| * config/sparc/nm-sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New. |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. |
| * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): New. |
| (inf_ttrace_region_size_ok_for_hw_watchpoint): Delete. |
| (inf_ttrace_target): Delete to_region_size_ok_for_hw_watchpoint and |
| add to_region_ok_for_hw_watchpoint. |
| * s390-nat.c (s390_region_size_ok_for_hw_watchpoint): Delete. |
| (s390_region_ok_for_hw_watchpoint): New. |
| (_initialize_s390_nat): Delete to_region_size_ok_for_hw_watchpoint |
| and add to_region_ok_for_hw_watchpoint. |
| * target.c (default_region_size_ok_for_hw_watchpoint, |
| debug_to_region_size_ok_for_hw_watchpoint): Delete prototype. |
| (update_current_target): Delete to_region_size_ok_for_hw_watchpoint |
| inheritance and default_region_size_ok_for_hw_watchpoint. |
| (default_region_ok_for_hw_watchpoint): If len is less than or equal |
| the length of void pointer, return ok. |
| (default_region_size_ok_for_hw_watchpoint): Delete. |
| (debug_to_region_size_ok_for_hw_watchpoint): Delete. |
| (setup_target_debug): Delete to_region_size_ok_for_hw_watchpoint. |
| * target.h (struct target_ops): Delete |
| to_region_size_ok_for_hw_watchpoint. |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. |
| |
| 2006-02-08 Ben Elliston <bje@au1.ibm.com> |
| Wu Zhou <woodzltc@cn.ibm.com> |
| |
| * ppc-linux-nat.c (PTRACE_GET_DEBUGREG, PTRACE_SET_DEBUGREG, |
| PTRACE_GETSIGINFO): Define. |
| (last_stopped_data_address): New. |
| (ppc_linux_check_watch_resources): New function. |
| (ppc_linux_region_ok_for_hw_watchpoint): New function. |
| (ppc_linux_insert_watchpoint): New function. |
| (ppc_linux_remove_watchpoint): New function. |
| (ppc_linux_stopped_data_address): New function. |
| (ppc_linux_stopped_by_watchpoint): New function. |
| (_initialize_ppc_linux_nat): Set the above hardware watchpoint |
| related target vectors. |
| * rs6000-tdep.c (rs6000_gdbarch_init): Set PPC architectures |
| to have nonsteppable watchpoint. |
| * target.c (default_region_ok_for_hw_watchpoint, |
| debug_to_region_ok_for_hw_watchpoint): New prototypes. |
| (update_current_target): Inherit to_region_ok_for_hw_watchpoint |
| and set default to_region_ok_for_hw_watchpoint. |
| (default_region_ok_for_hw_watchpoint): New function. |
| (debug_to_region_ok_for_hw_watchpoint): New function. |
| (setup_target_debug): Set to_region_ok_for_hw_watchpoint of |
| debug_target. |
| * target.h (struct target_ops): Add a new target vector |
| to_region_ok_for_hw_watchpoint. |
| (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Define this if it is not |
| defined anyplace else. |
| |
| 2005-02-07 Joel Brobecker <brobecker@adacore.com> |
| * symfile.c (add_symbol_file_command): Abort if the user forgot |
| to provide the address when the file has been loaded. |
| |
| 2006-02-07 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Update file based on maintainers survey. Add |
| a note to Past Maintainers. Move unresponsive or inactive |
| maintainers to Authorized Committers or Past Maintainers as |
| appropriate. Correct Jim Kingdon's email address. Remove |
| vacant areas of responsibility. |
| |
| 2006-02-06 Vladimir Prus <ghost@cs.msu.su> |
| |
| * breakpoint.c (print_one_breakpoint): For MI-like UI, output |
| fullname field. |
| |
| 2006-02-03 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * exceptions.h (enum errors): Rename NO_ERROR to GDB_NO_ERROR. |
| * exceptions.c (exception_none, exceptions_state_mc_init) |
| (throw_vfatal): Use GDB_NO_ERROR. |
| |
| 2006-02-02 Mark Kettenis <kettenis@gnu.org> |
| |
| * solib-svr4.h (struct link_map_offsets): Remove r_debug_size and |
| r_map_size members. Add r_version_offset, r_version_size and |
| r_ldsomap_offset members. |
| * solib-svr4.c (solib_svr4_r_map): Renamed from |
| fetch_link_map_member. Simplify using read_memory_typed_address. |
| (solib_svr4_r_ldsomap): New function. |
| (open_symbol_file_object): Use solib_svr_r_map. |
| (svr4_current_sos): Use solib_svr4_r_map and look for the dynamic |
| linker by using solib_svr4_r_ldsomap. |
| (svr4_ilp32_fetch_link_map_offsets) |
| (svr4_lp64_fetch_link_map_offsets): Adjust for changes to `struct |
| link_map_offsets'. |
| * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Adjust for |
| changes to `struct link_map_offsets'. |
| * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets) |
| (mipsnbsd_lp64_fetch_link_map_offsets): Adjust for changes to |
| `struct link_map_offsets'. |
| |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-nat.c (struct saved_ptids, threads_to_delete) |
| (record_dead_thread, prune_lwps, find_thread_from_lwp) |
| (exit_lwp): New. |
| (linux_nat_resume): Call prune_lwps. |
| (wait_lwp, linux_nat_wait): Call exit_lwp. |
| |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * printcmd.c (printf_command): Make format string checking |
| stricter. Add separate cases for long_arg, ptr_arg, and |
| long_double_arg. |
| * utils.c (xstrvprintf): Improve the error message issued |
| for a bad format string. |
| * Makefile.in (GDB_WARN_CFLAGS_NO_FORMAT, INTERNAL_CFLAGS_BASE): |
| New variables. |
| (gnu-v3-abi.o, monitor.o, procfs.o, linux-thread-db.o): Remove |
| $(NO_WERROR_CFLAGS). |
| (printcmd.o): Likewise. Use $(GDB_WARN_CFLAGS_NO_FORMAT) and |
| enable -Werror. |
| |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (remote.o): Update. |
| * remote.c (show_packet_config_cmd): Shorten messages. |
| (remote_set_cmdlist, remote_show_cmdlist): Make file-static. |
| (show_remote_cmd): Iterate. |
| (_initialize_remote): Remove remote_set_cmdlist, |
| remote_show_cmdlist. |
| |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (gdbtypes_h, gdbtypes.o, utils.o): Update. |
| * defs.h (hashtab_obstack_allocate, dummy_obstack_deallocate): Add |
| prototypes. |
| * dwarf2read.c (read_subroutine_type): Use TYPE_ZALLOC. |
| (hashtab_obstack_allocate, dummy_obstack_deallocate): Moved to... |
| * utils.c (hashtab_obstack_allocate, dummy_obstack_deallocate): |
| ...here. |
| * gdbtypes.c: Include "hashtab.h". |
| (build_gdbtypes): Remove extra prototype. |
| (struct type_pair, type_pair_hash, type_pair_eq) |
| (create_copied_types_hash, copy_type_recursive): New. |
| * gdbtypes.h: Include "hashtab.h". |
| (TYPE_ZALLOC): New. |
| (create_copied_types_hash, copy_type_recursive): New prototypes. |
| * objfiles.c (free_objfile): Call preserve_values. |
| * symfile.c (reread_symbols): Likewise. |
| (clear_symtab_users): Remove calls to clear_value_history and |
| clear_internalvars. |
| * value.c (clear_value_history, clear_internalvars): Removed. |
| (preserve_one_value, preserve_values): New functions. |
| * value.h (clear_value_history, clear_internalvars): Removed. |
| (preserve_values): New prototype. |
| |
| * tracepoint.c (_initialize_tracepoint): Do not initialize convenience |
| variables here. |
| |
| 2006-01-29 Mark Kettenis <kettenis@gnu.org> |
| |
| * amd64-tdep.c (amd64_classify): Handle TYPE_CODE_BOOL. |
| Fixes PR tdep/2075. |
| |
| 2006-01-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * MAINTAINERS: Use a consistent email address for brobecker. |
| |
| 2006-01-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * infcmd.c (post_create_inferior): Fix copy/paste error introduced |
| in the previous change. |
| |
| 2006-01-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| PR gdb/1914 |
| * fork-child.c (fork_inferior): Don't call |
| solib_create_inferior_hook. |
| * infcmd.c (post_create_inferior): Call solib_add, |
| solib_create_inferior_hook, and re_enable_breakpoints_in_shlibs. |
| (attach_command): Don't call solib_add or |
| re_enable_breakpoints_in_shlibs. Call post_create_inferior |
| instead. |
| * remote.c (remote_open_1): Don't call solib_create_inferior_hook |
| or observer_notify_inferior_created. Call post_create_inferior |
| instead. |
| * corelow.c: Don't include "observer.h". |
| (solib_add_stub): Deleted. |
| (core_open): Don't call observer_notify_inferior_created or |
| solib_add_stub. Call post_create_inferior instead. |
| * inf-ptrace.c: Don't include "observer.h". |
| (inf_ptrace_attach): Don't call observer_notify_inferior_created. |
| * inf-ttrace.c: Don't include "observer.h". |
| (inf_ttrace_attach): Don't call observer_notify_inferior_created. |
| * inferior.h (solib_create_inferior_hook): Remove redundant |
| prototype. |
| * inftarg.c: Don't include "observer.h". |
| (child_attach): Don't call observer_notify_inferior_created. |
| * Makefile.in: Update dependencies. |
| |
| 2006-01-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * infcmd.c: Include "observer.h". |
| (post_create_inferior): New function. |
| (run_command_1): Call it. Also call proceed. |
| * inferior.h (post_create_inferior): New prototype. |
| * Makefile.in (infcmd.o): Update. |
| |
| * gnu-nat.c (gnu_create_inferior): Don't call proceed. |
| * go32-nat.c (go32_create_inferior): Likewise. |
| * nto-procfs.c (procfs_create_inferior): Likewise. |
| * procfs.c (procfs_create_inferior): Likewise. |
| * remote-sim.c (gdbsim_create_inferior): Likewise. |
| * remote.c (extended_remote_create_inferior) |
| (extended_remote_async_create_inferior): Likewise. |
| * win32-nat.c (win32_create_inferior): Likewise. |
| * wince.c (child_create_inferior): Likewise. |
| |
| * monitor.c (monitor_create_inferior): Don't call proceed. |
| Set the PC manually. |
| * ocd.c (ocd_create_inferior): Likewise. |
| * remote-e7000.c (e7000_create_inferior): Likewise. |
| * remote-m32r-sdi.c (m32r_create_inferior): Likewise. |
| * remote-mips.c (mips_create_inferior): Likewise. |
| * remote-rdp.c (remote_rdp_create_inferior): Likewise. |
| * remote-sds.c (sds_create_inferior): Likewise. |
| * remote-st.c (st2000_create_inferior): Likewise. |
| |
| * inf-ptrace.c (inf_ptrace_create_inferior): Don't call |
| proceed or observer_notify_inferior_created. |
| * inf-ttrace.c (inf_ttrace_create_inferior): Likewise. |
| * inftarg.c (child_create_inferior): Likewise. |
| |
| 2006-01-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-thread-db.c (thread_db_mourn_inferior): Remove breakpoints |
| after mourning the inferior. |
| |
| 2006-01-24 Jim Blandy <jimb@redhat.com> |
| |
| * valarith.c (binop_user_defined_p): Handle refs to typedefs. |
| |
| 2006-01-24 Fred Fish <fnf@specifix.com> |
| |
| * parse.c (source.h): Include. |
| (parse_exp_in_context): Use static source context if no |
| other context found. |
| |
| 2006-01-23 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * sh-tdep.c: Include reggroups.h. |
| (sh_register_reggroup_p): New function. |
| (sh_gdbarch_init): Add call to set_gdbarch_register_reggroup_p. |
| * Makefile.in (sh-tdep.o): Add dependency on reggroups.h. |
| |
| 2006-01-23 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * cli/cli-cmds.c: Include fcntl.h. |
| (source_command): Use the GDB search path to find script files. |
| |
| 2006-01-22 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| PR tdep/2029 |
| Suggested by Till Straumann <strauman@slac.stanford.edu>: |
| * rs6000-tdep.c (skip_prologue): Update check for later mtlr |
| instructions. Handle PIC bcl. |
| |
| 2006-01-22 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * config/djgpp/README: Typo fix. |
| * config/djgpp/fnchange.lst: Update. |
| |
| 2006-01-22 Mark Kettenis <kettenis@gnu.org> |
| |
| * sparc-tdep.h (struct gdbarch_tdep): Add step_trap member. |
| (sparc_address_from_register): New prototype. |
| (sparcnbsd_step_trap): New prototype. |
| * sparc-tdep.c (sparc_address_from_register): Make globally |
| visible. |
| (sparc_analyze_control_transfer): Change prototype to accept |
| `struct gdbarch *' as first argument. Allow for optional hnadling |
| for trap instructions. |
| (sparc_step_trap): New function. |
| (sparc_software_single_step): Adjust call to |
| sparc_analyze_control_trabsfer. |
| (sparc32_gdbarch_init): Initialize TDEP->step_trap. |
| * sparcnbsd-tdep.c (sparcnbsd_step_trap): New function. |
| (sparc32nbsd_init_abi): Set TDEP->step_trap. |
| * sparc64obsd-tdep.c (sparc64obsd_init_abi): Set TDEP->step_trap. |
| * sparc64nbsd-tdep.c (sparc64nbsd_init_abi): Set TDEP->step_trap. |
| |
| * sparc-tdep.c (sparc32_return_value): Convert to use |
| RETURN_VALUE_ABI_PRESERVES_ADDRESS instead of |
| RETURN_VALUE_STRUCT_CONVENTION. |
| (sparc32_extract_struct_value_address): Remove. |
| |
| 2006-01-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address) |
| (avr_extract_return_value, avr_frame_prev_register): Use gdb_byte. |
| |
| 2006-01-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * solib.c (info_sharedlibrary_command): Avoid internal_error. |
| |
| 2006-01-21 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_mxcsr_type): New variable. |
| (i386_init_types): Initialize i386_mxcsr_type. |
| (i386_register_type): Return i386_mxcsr_type for %mxcsr. |
| * i386-tdep.c (i386_mxcsr_type): New extern. |
| * amd64-tdep.c (amd64_register_info): Return i386_mxcsr_type for |
| %mxcsr. |
| |
| 2006-01-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * Makefile.in (remote-rdi.o): Remove. |
| (rdi-share/libangsd.a): Likewise. |
| * README: Don't mention remote-rdi.c. |
| * NEWS: Mention removal of rdi-share. |
| * configure.ac: Don't configure rdi-share subdirectory. |
| * remote-rdi.c: Remove. |
| * config/arm/embed.mt (TDEPFILES): Remove remote-rdi.o. |
| (TDEPLIBS): Remove rdi-share/libangsd.a. |
| * rdi-share/Makefile.am: Remove. |
| * rdi-share/Makefile.in: Likewise. |
| * rdi-share/README.CYGNUS: Likewise. |
| * rdi-share/aclocal.m4: Likewise. |
| * rdi-share/adp.h: Likewise. |
| * rdi-share/adperr.h: Likewise. |
| * rdi-share/angel.h: Likewise. |
| * rdi-share/angel_bytesex.c: Likewise. |
| * rdi-share/angel_bytesex.h: Likewise. |
| * rdi-share/angel_endian.h: Likewise. |
| * rdi-share/ardi.c: Likewise. |
| * rdi-share/ardi.h: Likewise. |
| * rdi-share/armdbg.h: Likewise. |
| * rdi-share/buffers.h: Likewise. |
| * rdi-share/chandefs.h: Likewise. |
| * rdi-share/channels.h: Likewise. |
| * rdi-share/chanpriv.h: Likewise. |
| * rdi-share/configure: Likewise. |
| * rdi-share/configure.in: Likewise. |
| * rdi-share/crc.c: Likewise. |
| * rdi-share/crc.h: Likewise. |
| * rdi-share/dbg_conf.h: Likewise. |
| * rdi-share/dbg_cp.h: Likewise. |
| * rdi-share/dbg_hif.h: Likewise. |
| * rdi-share/dbg_rdi.h: Likewise. |
| * rdi-share/devclnt.h: Likewise. |
| * rdi-share/devices.h: Likewise. |
| * rdi-share/devsw.c: Likewise. |
| * rdi-share/devsw.h: Likewise. |
| * rdi-share/drivers.c: Likewise. |
| * rdi-share/drivers.h: Likewise. |
| * rdi-share/etherdrv.c: Likewise. |
| * rdi-share/ethernet.h: Likewise. |
| * rdi-share/host.h: Likewise. |
| * rdi-share/hostchan.c: Likewise. |
| * rdi-share/hostchan.h: Likewise. |
| * rdi-share/hsys.c: Likewise. |
| * rdi-share/hsys.h: Likewise. |
| * rdi-share/logging.c: Likewise. |
| * rdi-share/logging.h: Likewise. |
| * rdi-share/msgbuild.c: Likewise. |
| * rdi-share/msgbuild.h: Likewise. |
| * rdi-share/params.c: Likewise. |
| * rdi-share/params.h: Likewise. |
| * rdi-share/rx.c: Likewise. |
| * rdi-share/rxtx.h: Likewise. |
| * rdi-share/serdrv.c: Likewise. |
| * rdi-share/serpardr.c: Likewise. |
| * rdi-share/sys.h: Likewise. |
| * rdi-share/tx.c: Likewise. |
| * rdi-share/unixcomm.c: Likewise. |
| * rdi-share/unixcomm.h: Likewise. |
| |
| 2006-01-21 Mark Kettenis <kettenis@gnu.org> |
| |
| * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_prev_register): |
| Change type of last argument to `gdb_byte *'. |
| |
| 2006-01-20 Mark Kettenis <kettenis@gnu.org> |
| |
| * hppa-tdep.h (hppa_in_solib_call_trampoline) |
| (hppa_skip_trampoline_code): New prototypes. |
| * hppa-tdep.c (struct insn_pattern): New. |
| (hppa_long_branch_stub, hppa_long_branch_pic_stub) |
| (hppa_import_stub, hppa_import_pic_stub, hppa_plt_stub): Moved |
| here from hppa-linux-tdep.c |
| (HPPA_MAX_INSN_PATTERN_LEN): New define. |
| (hppa_match_insns, hppa_match_insns_relaxed, hppa_in_dyncall) |
| (hppa_in_solib_call_trampoline, hppa_skip_trampoline_code): New |
| functions based on functions removed from hppa-linux-tdep.c. |
| * hppa-linux-tdep.c (hppa_long_branch_stub) |
| (hppa_long_branch_pic_stub, hppa_import_stub) |
| (hppa_import_pic_stub, hppa_plt_stub): Moved to hppa-tdep.c. |
| (insns_match_pattern_relaxed, hppa_linux_in_dyncall) |
| (hppa_linux_in_solib_call_trampoline) |
| (hppa_linux_skip_trampoline_code): Removed. |
| (hppa_linux_init_abi): Set TDEP->in_solib_call_tranpoline to |
| hppa_in_solib_call_trampoline and skip_trampoline_code to |
| hppa_skip_trampoline_code. |
| * hppabsd-tdep.c (hppabsd_init_abi): Set |
| TDEP->in_solib_call_trampoline and skip_trampoline_code. |
| |
| 2006-01-20 Jim Blandy <jimb@redhat.com> |
| |
| * MAINTAINERS: Change my E-mail address. |
| |
| * configure.ac: Add -Wno-pointer-sign to list of build warnings. |
| * configure: Regenerated. |
| |
| 2006-01-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Overhaul. |
| |
| 2006-01-18 Mark Kettenis <kettenis@gnu.org> |
| |
| Based on a previous patch form Michal Ludvig: |
| * amd64-tdep.c (amd64_sse_type): Remove. |
| (amd64_register_info): Use i386_eflags_type and i386_sse_type |
| where appropriate. |
| (AMD64_NUM_REGS): Use ARRAY_SIZE. |
| (amd64_register_type): Remove code to build amd_sse_type. |
| * i386-tdep.c (i386_eflag_type): New variable. |
| (i386_mmx_type, i386_sse_type): Make global. |
| (i386_init_types): New function. |
| (i386_build_mmx_type, i386_build_sse_type): Remove functions. |
| (i386_register_type): Return i386_eflag_type, i386_sse_type and |
| i386_mmx_type when appropriate. |
| (_initialize_i386_tdep): Call i386_init_types. |
| * i386-tdep.h (i386_eflags_type, i386_mmx_type, i386_sse_type): |
| Declare extern. |
| |
| Based on a previous patch form Michal Ludvig: |
| * gdbtypes.c (append_flags_type_flag, init_flags_type): New |
| functions. |
| (is_integral_type, rank_one_type, recursive_dump_type): Add |
| support for TYPE_CODE_FLAGS. |
| * gdbtypes.h (enum type_code): Add TYPE_CODE_FLAGS. |
| (append_flags_type_field, init_flags_type): New prototypes. |
| * ada-valprint.c (ada_val_print_1): Add support for |
| TYPE_CODE_FLAGS. |
| * c-valprint.c (c_val_print): Likewise. |
| * f-valprint.c (f_val_print): Likewise. |
| * p-valprint.c (pascal_val_print): Likewise. |
| * valprint.c (val_print_type_code_flags): New function. |
| * valprint.h (val_print_type_code_flags): New prototype. |
| * value.c (unpack_long, value_from_longest): Add support for |
| TYPE_CODE_FLAGS. |
| |
| 2006-01-17 Christopher Faylor <cgf@timesys.com> |
| |
| * MAINTAINERS: Very belatedly remove myself from from the list of |
| people caught up in the paper trail. |
| |
| 2006-01-17 Jim Blandy <jimb@redhat.com> |
| |
| * symtab.h (struct general_symbol_info): Use gdb_byte for |
| value.bytes. |
| * stabsread.c (define_symbol): Use gdb_byte for the buffer holding |
| a floating-point constant's value. |
| * dwarf2read.c (dwarf2_const_value): Remove casts of value buffer |
| to char *. |
| * findvar.c (read_var_value): Eliminate needless temporary. |
| |
| * dwarf2-frame.c (dwarf2_read_section): Update forward declaration |
| to match prior change to dwarf2_read_section's type. |
| |
| 2006-01-16 Paul Gilliam <pgilliam@us.ibm.com> |
| |
| * ppc-tdep.h (PPC_MAX_EPILOGUE_INSTRUCTIONS): New define. |
| * rs6000-tdep.c (insn_changes_sp_or_jumps) |
| (rs6000_in_function_epilogue_p): New functions. |
| (rs6000_gdbarch_init): Set in_function_epilogue_p. |
| |
| 2006-01-17 Jim Blandy <jimb@redhat.com> |
| |
| * dwarf2read.c (struct dwarf2_per_objfile, struct comp_unit_head) |
| (struct line_header, struct partial_die_info, struct dwarf_block): |
| Use gdb_byte for members that refer to Dwarf section contents. |
| (dwarf2_read_abbrevs, dwarf2_read_section, dwarf_decode_lines, |
| dwarf_decode_macros, load_comp_unit, load_partial_dies, |
| locate_pdi_sibling, partial_read_comp_unit_head, peek_die_abbrev, |
| read_1_byte, read_1_signed_byte, read_2_bytes, read_4_bytes, |
| read_8_bytes, read_address, read_attribute, read_attribute_value, |
| read_comp_unit, read_comp_unit_head, read_die_and_children, |
| read_die_and_siblings, read_full_die, read_indirect_string, |
| read_initial_length, read_n_bytes, read_offset, read_partial_die, |
| read_signed_leb128, read_string, read_unsigned_leb128, |
| skip_children, skip_leb128, skip_one_die): Same. |
| |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * complaints.c (stop_whining): Make signed. |
| * linux-thread-db.c (thread_db_store_registers): Use gdb_byte. |
| |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * dwarf2read.c, remote-fileio.c, remote.h: Update copyright |
| notices. |
| |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * dwarf2read.c (peek_die_abbrev, read_address, read_initial_length) |
| (read_offset): Change BYTES_READ argument to unsigned int. |
| (dwarf2_build_psymtabs_easy, read_comp_unit_head) |
| (create_all_comp_units, dwarf2_get_pc_bounds) |
| (dwarf_decode_line_header, var_decode_location) |
| (dwarf_decode_macros): Change local BYTES_READ variables to |
| unsigned int. |
| (read_indirect_string): Remove obsolete cast. |
| |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote-fileio.c (remote_fileio_return_success): Take a gdb_byte |
| argument. |
| (remote_fileio_func_open, remote_fileio_func_rename) |
| (remote_fileio_func_unlink, remote_fileio_func_stat) |
| (remote_fileio_func_fstat, remote_fileio_func_gettimeofday) |
| (remote_fileio_func_system): Cast the arguments to |
| remote_read_bytes and remote_write_bytes. |
| (remote_fileio_func_read, remote_fileio_func_write): Use a |
| gdb_byte buffer. |
| * remote.h (remote_read_bytes, remote_write_bytes): Update |
| prototypes. |
| * remote.c (hex2bin, bin2hex): Use gdb_byte for the BIN argument. |
| (threadref_to_int): Replace bogus char * cast. |
| (remote_unpack_thread_info_response): Use int for tag. |
| (remote_threads_extra_info, remote_check_symbols): Cast string |
| arguments to hex2bin. |
| (remote_wait): Use a char buffer for packets and a gdb_byte |
| buffer for registers. |
| (remote_async_wait): Likewise. |
| (remote_prepare_to_store, store_register_using_P) |
| (remote_store_registers): Use gdb_byte buffers. |
| (remote_write_bytes, remote_read_bytes): Use a gdb_byte pointer |
| for MYADDR and char buffers for strings. |
| (remote_xfer_partial): Add casts for string operations on READBUF. |
| (remote_rcmd): Cast strings passed to bin2hex. |
| |
| 2006-01-16 Mark Mitchell <mark@codesourcery.com> |
| |
| * aclocal.m4: Regenerate. |
| |
| 2006-01-16 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * mt-tdep.c (enum mt_gdb_regnums): Add MT_COPRO_PSEUDOREG_ARRAY, |
| MT_COPRO_PSEUDOREG_DIM_1, MT_COPRO_PSEUDOREG_DIM_2, |
| MT_COPRO_PSEUDOREG_REGS members. Adjust MT_NUM_PSEUDO_REGS. |
| (mt_register_name): Lazily synthesize name for coprocessor pseudo |
| array registers. |
| (mt_copro_register_type): New. Broken out of ... |
| (mt_register_type): ... here. Use it. Deal with coprocessor |
| pseudo array. |
| (mt_select_coprocessor): New. |
| (mt_pseudo_register_read, mt_pseudo_register_write): Deal with |
| coprocessor pseudo array. |
| |
| 2006-01-16 Andrew Stubbs <andrew.stubbs@st.com> |
| |
| * breakpoint.c (insert_breakpoints): Check that a thread exists |
| before inserting thread specific breakpoints. |
| |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> |
| |
| * osabi.c (generic_elf_osabi_sniffer): Fix typo in previous |
| commit. |
| |
| * alpha-tdep.c (alpha_gdbarch_init): Set cannot_step_breakpoint. |
| * config/alpha/nm-osf.h (CANNOT_STEP_BREAKPOINT): Remove. |
| * config/alpha/nm-linux.h (CANNOT_STEP_BREAKPOINT): Remove. |
| * config/alpha/nm-nbsd.h: Remove file. |
| * config/alpha/nm-fbsd.h: Remove file |
| * config/alpha/nbsd.mh (NAT_FILE): Remove. |
| * config/alpha/fbsd.mh (NAT_FILE): Remove. |
| |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * macroexp.c (expand): Initialize argc. |
| * stabsread.c (read_type): Handle errors from read_args. |
| (read_args): Return NULL for errors. |
| |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> |
| |
| * osabi.c (generic_elf_osabi_sniffer): Use memcmp instead of |
| strcmp to compare string to a byte buffer. |
| |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * printcmd.c (output_command): Always initialize fmt.size. |
| (printf_command): Use gdb_byte. |
| * symfile.c (separate_debug_file_exists): Use gdb_byte. |
| (load_section_callback, read_target_long_array): Likewise. |
| (simple_read_overlay_table, simple_read_overlay_region_table) |
| (simple_overlay_update_1): Correct calls to read_target_long_array. |
| * valprint.c (partial_memory_read): Change MYADDR to a gdb_byte *. |
| Also change local pointers. |
| (val_print_string): Use gdb_byte. |
| |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> |
| |
| * alphafbsd-tdep.c: Include "solib-svr4.h". |
| (alphafbsd_init_abi): Set solib_svr4_fetch_link_map_offsets to |
| svr4_lp64_fetch_link_map_offsets. |
| * Makefile.in (alphafbsd-tdep.o): Update dependencies. |
| * config/alpha/fbsd.mt (TDEPFILES): Add corelow.o, solib.o and |
| solib-svr4.o. |
| * config/alpha/fbsd.mh (NATDEPFILES): Remove solib.o, solib-svr4.o |
| and solib-legacy.o. |
| * config/alpha/nm-fbsd.h: Don't include "solib.h". |
| |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * source.c (_initialize_source): Use add_setshow_integer_cmd. |
| |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linux-fork.c (delete_fork_command, detach_fork_command): Use |
| PIDGET. |
| |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> |
| |
| * arm-linux-tdep.c (arm_linux_svr4_fetch_link_map_offsets): |
| Remove. |
| (arm_linux_init_abi): Set solib_svr4_fetch_link_map_offsets to |
| svr4_ilp32_fetch_link_map_offsets. |
| * cris-tdep.c (cris_linux_svr4_fetch_link_map_offsets): Remove |
| function. |
| (cris_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to |
| svr4_ilp32_fetch_link_map_offsets. |
| * mips-linux-tdep.c (mips_linux_svr4_fetch_link_map_offsets) |
| (mips64_linux_svr4_fetch_link_map_offsets): Remove functions. |
| (mips_linux_init_abi): Set solib_svr4_fetch_link_map_offsets to |
| svr4_ilp32_fetch_link_map_offsets or svr4_lp64_fetch_link_map_offsets |
| where appropriate. |
| * nbsd-tdep.c (nbsd_ilp32_solib_svr4_fetch_link_map_offsets): |
| Simply call svr4_ilp32_fetch_link_map_offsets. |
| (nbsd_lp64_solib_svr4_fetch_link_map_offsets): Simply call |
| svr4_lp64_fetch_link_map_offsets. |
| * ppc-linux-tdep.c (ppc_linux_svr4_fetch_link_map_offsets): Remove |
| function. |
| (ppc_linux_init_abi): Set solib_svr4_fetch_link_map_offsets to |
| svr4_ilp32_fetch_link_map_offsets. |
| * s390-tdep.c (s390_svr4_fetch_link_map_offsets) |
| (s390x_svr4_fetch_link_map_offsets): Remove functions. |
| (s390_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to |
| svr4_ilp32_fetch_link_map_offsets or svr4_lp64_fetch_link_map_offsets |
| where appropriate. |
| |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> |
| |
| * arm-tdep.c (arm_return_value): Change type of readbuf and |
| writebuf arguments to `gdb_byte *'. |
| |
| * s390-tdep.c: Do not include "tm.h" and "../bfd/bfd.h". |
| * Makefile.in (s390-tdep.o): Update dependencies. |
| |
| 2006-01-14 Mark Kettenis <kettenis@gnu.org> |
| |
| * sol2-tdep.h. sol2-tdep.c: New files. |
| * amd64-sol2-tdep.c: Include "sol2-tdep.h". |
| (amd64_sol2_init_abi): Set skip_solib_resolver. |
| * i386-sol2-tdep.c: Include "sol2-tdep.h". |
| (i386_sol2_init_abi): Set skip_solib_resolver. |
| * sparc-sol2-tdep.c: Include "sol2-tdep.h". |
| (sparc32_sol2_init_abi): Set skip_solib_resolver. |
| * sparc64-sol2-tdep.c: Include "sol2-tdep.h". |
| (sparc64_sol2_init_abi): Set skip_solib_resolver. |
| * Makefile.in (sol2_tdep_h): New variable. |
| (ALLDEPFILES): Add sol2-tdep.c. |
| (sol2-tdep.o): New target. |
| (amd64-sol2-tdep.o, i386-sol2-tdep.o, sparc-sol2-tdep.o) |
| (sparc64-sol2-tdep.o): Update dependencies |
| * config/i386/i386sol2.mt (TDEPFILES): Add sol2-tdep.o. |
| * config/i386/sol2-64.mt (TDEPFILES): Add sol2-tdep.o. |
| * config/sparc/sol2.mt (TDEPFILES): Add sol2-tdep.o. |
| * config/sparc/sol2-64.mt (TDEPFILES): Add sol2-tdep.o. |
| |
| * hppa-linux-tdep.c: Fix copyright indentation. |
| |
| * hppa-tdep.h (enum hppa_regnum): Add HPPA_FP31R_REGNUM. |
| * hppabsd-nat.c (hppabsd_fpregset_supplies_p) |
| (hppabsd_supply_fpregset, hppabsd_collect_fpregset): New |
| functions. |
| (hppabsd_fetch_registers, hppabsd_store_registers): Handle |
| floating-point registers. |
| |
| 2006-01-13 Mark Mitchell <mark@codesourcery.com> |
| |
| * event-loop.c (gdb_select): Detect file descriptors that have |
| been closed. |
| |
| 2006-01-13 Mark Kettenis <kettenis@gnu.org> |
| |
| * hppabsd-tdep.c (hppabsd_init_abi): Set long_double_bit to 64, |
| and long_double_format accordingly. |
| |
| 2006-01-12 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * ada-exp.y (yyerror): Change message to ignore the argument, avoiding |
| translation problems. |
| * ada-lang.c (ada_value_struct_elt): Change interface and handling |
| of errors to avoid translation problem (and less than optimal error |
| messages). |
| (ada_value_tag, ada_tag_name_1, ada_tag_name_2, ada_evaluate_subexp): |
| Use new interface to ada_value_struct_elt. |
| * ada_lang.h (ada_value_struct_elt): Update declaration to new |
| interface. |
| |
| * ChangeLog: remove reference to ada-tasks.c from entry of |
| 2006-01-07. |
| |
| 2006-01-11 Mark Kettenis <kettenis@gnu.org> |
| |
| * remote.c (get_memory_packet_size, set_thread) |
| (remote_unpack_thread_info_response, remote_get_threadinfo) |
| (parse_threadlist_response, remote_get_threadlist) |
| (remote_current_thread, remote_threads_info) |
| (remote_threads_extra_info, extended_remote_restart, get_offsets) |
| (remote_check_symbols, remote_open_1, remote_detach) |
| (remote_async_wait, remote_fetch_registers) |
| (remote_store_registers, check_binary_download, putpkt_binary) |
| (remote_insert_breakpoint, remote_insert_watchpoint) |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) |
| (remote_remove_hw_breakpoint, remote_xfer_partial, remote_rcmd) |
| (packet_command): Remove redundant parenthesis. |
| |
| 2006-01-10 Mark Kettenis <kettenis@gnu.org> |
| |
| * corefile.c (read_memory_integer, read_memory_unsigned_integer) |
| (read_memory_typed_address, write_memory) |
| (write_memory_unsigned_integer, write_memory_signed_integer): Use |
| gdb_byte where appropriate. |
| |
| * mi/mi-main.c (mi_cmd_data_read_memory): Change type of mbus into |
| 'gdb_byte *'. |
| |
| * target.h (target_read_memory_partial, target_write_memory_partial): |
| Change second argument to 'gdb_byte *'. |
| * target.c (target_xfer_memory_partial): Change third argument to |
| 'gdb_byte *'. |
| (target_read_memory_partial, target_write_memory_partial): Change |
| second argument to 'gdb_byte *'. |
| |
| * linespec.c (decode_objc): Make i1 and i2 unsigned. |
| (find_method): Set values.sals to NULL. |
| |
| 2006-01-09 Mark Kettenis <kettenis@gnu.org> |
| |
| * amd64obsd-nat.c (amd64obsd_supply_pcb): Use 'gdb_byte *' instead |
| of 'char *' in cast. |
| |
| 2006-01-07 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * ada-exp.y, ada-lex.l, ada-typeprint.c: I18n markup. |
| * ada-lang.c: I18n markup. |
| Editorial: change "can not" => "cannot" throughout. |
| |
| 2006-01-07 Mark Kettenis <kettenis@gnu.org> |
| |
| * Makefile.in: Sort dependencies. |
| |
| 2006-01-07 Eli Zaretskii <eliz@gnu.org> |
| |
| * top.c (control_level): Remove unused variable. |
| |
| 2006-01-06 Fred Fish <fnf@specifix.com> |
| |
| * objfiles.c (source.h): Include. |
| (free_objfile): Update comment about clear_symtab_users(). |
| (free_objfile): Check all symtabs of objfile being freed and if |
| one of them is the current source symtab, call |
| clear_current_source_symtab_and_line(). |
| |
| 2006-01-04 Michael Snyder <msnyder@redhat.com> |
| |
| Checkpoint/Restart for Linux. |
| * linux-nat.c: Add support for debugging multiple forks. |
| Add #include for linux-fork.h (interface spec). |
| (super_mourn_inferior): New function pointer. |
| (child_mourn_inferior): New function / target method. |
| (linux_target): Claim to_mourn_inferior method pointer. |
| (child_follow_fork): Call interface to linux-fork, conditionally |
| add new fork processes to list of debugged processes. |
| (kill_inferior): Use interface to linux-fork to kill |
| multiple processes. |
| |
| * linux-fork.h: New file. |
| * linux-fork.c: New file. Support for debugging multiple forks |
| of the same program. Support for checkpoint and restart commands. |
| |
| * infrun.c (nullify_last_target_wait_ptid): New function. |
| |
| * Makefile.in: Add linux-fork. |
| * config/*/linux.mh: Add linux-fork. |
| * NEWS: Mention new functionality. |
| |
| 2006-01-02 Paul Hilfinger <hilfingr@nile.gnat.com> |
| |
| * ada-exp.y (syntax definitions,write_var_or_type,write_name_assoc): |
| Change uses of "illegal" to "invalid". |
| |
| 2006-01-02 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * ada-exp.y: Considerable reorganization to move functionality |
| from ada-lex.l to here, where it is logically more appropriate. |
| The original reason, however, was to prevent premature name |
| lookups for selector names in record aggregates. |
| (BLOCKNAME, TYPENAME, OBJECT_RENAMING): Remove; lexer now returns |
| NAME for all of these. |
| (VAR): New artificial token to clarify precedence rules. |
| (OTHERS): New lexeme. |
| (empty_stoken): New symbol. |
| (%union): Remove ssym, voidval. |
| (%type): Remove <voidval> type declarations. |
| (syntax definitions): Add aggregates. |
| Remove distinction between NAME, TYPENAME, BLOCKNAME, OBJECT_RENAMING. |
| Rename some non-terminals to be closer to reference manual usage. |
| Tighten up expression syntax to disallow certain non-Ada |
| constructions such as X and then Y or else Z. |
| (ada_parse): Remove initialization of left_block_context. |
| (write_var_from_name): Remove. |
| (write_var_or_type): New function, containing previous code from |
| defunct write_var_from_name and name_lookup. |
| (block_lookup): New function, moved from ada-lex.l |
| (select_possible_type_sym): New function, factored out of |
| name_lookup, which used to be in ada-lex.l. |
| (find_primitive_type): Ditto. |
| (chop_selector): Ditto. |
| (write_ambiguous_var): New function, factored out of defunct |
| write_var_from_name. |
| (write_selectors): New function. |
| (write_name_assoc): New function. |
| (write_exp_op_with_string): New function. |
| |
| * ada-lex.l (processId): Change interface to return stoken. |
| (tempbuf, resize_tempbuf, tempbuf_size, tempbuf_len): Remove. |
| (block_lookup, name_lookup): Remove. Functionality moved to |
| ada-exp.y. |
| (state IN_STRING): Remove. |
| (rules): Handle string escapes in processString. |
| Add 'others' token. |
| Return all NAMEs, BLOCKNAMEs, OBJECT_RENAMINGs, TYPENAMEs in |
| yylval.sval (as simple strings). |
| All name look-ups now handled in ada-exp.y. |
| Introduce "::" (COLONCOLON) token and return as separate token. |
| (processId): Change return convention. Comment. |
| Leave leading "'" in place. |
| (processString): New function. |
| (find_dot_all): Add note to comment. |
| Fix problem that allowed match only at the end. |
| |
| * ada-lang.c: Introduce aggregates. |
| (find_struct_field): Add new parameter to count fields skipped, and |
| allow other output parameters to be NULL. |
| (value_tag_from_contents_and_address, ada_value_struct_elt): Use |
| new find_struct_field. |
| (ada_index_struct_field, assign_aggregate, ada_is_array_type) |
| (num_visible_fields, ada_index_struct_field_1, ada_index_struct_field) |
| (num_component_specs, assign_component, assign_aggregate): |
| (aggregate_assign_from_choices,aggregate_assign_positional) |
| (aggregate_assign_others,add_component_interval): |
| New functions. |
| (ada_evaluate_subexp): Declare. |
| Add aggregate-related operators. |
| (ada_forward_operator_length): Declare. |
| (resolve_subexp): Add cases for new aggregate operators and OP_NAME. |
| Consolidate Ada operators, using ada_forward_operator_length. |
| (ada_search_struct_field): Search in forward order. |
| (ADA_OPERATORS): Add new aggregate operators. |
| (ada_operator_length, ada_op_name, ada_forward_operator_length) |
| (ada_dump_subexp_body, ada_print_subexp): Handle new aggregate |
| operators and OP_NAME. |
| (ada_type_of_array): Use longest_to_int. |
| (value_assign_to_component): New function. |
| (ada_forward_operator_length, ada_op_name, ada_dump_subexp_body): |
| Add OP_NAME case. |
| (ada_forward_operator_length, ada_dump_subexp_body): |
| Add OP_STRING case. |
| |
| * ada-lang.h (enum ada_operator): Add OP_AGGREGATE, OP_OTHERS, |
| OP_CHOICES, OP_DISCRETE_RANGE, OP_POSITIONAL. |
| |
| 2006-01-02 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * ada-lang.c (process_raise_exception_name): Remove extraneous |
| definition from unsubmitted code. |
| |
| (is_lower_alphanum): New function. |
| (ada_decode): Add support for decoding protected object subprograms |
| and entries, and of entities declared inside protected object |
| subprograms. |
| Also add missing handling for__{DIGITS}+ suffixes. |
| Allow '$<digits>' as valid overloading suffix. |
| (is_name_suffix): Add handling for protected type entriy suffixes. |
| Also add support for protected type subprogram suffixes, but keep |
| it commented out for now, as there is an ambiguity between these |
| entities and other internally generated entities. |
| Allow '$<digits>' as valid overloading suffix. |
| (is_valid_name_for_wild_match): New function. |
| (wild_match): Add an exra level of verification of the entity name |
| before declaring it a match for the given pattern. |
| |
| (ada_type_of_array, ada_evaluate_subexp): Use more proper |
| longest_to_int rather than cast. |
| |
| (ada_evaluate_subexp): Use "invalid" rather than "illegal" in comment. |
| |
| (ada_coerce_to_simple_array): Call check_size to make sure |
| that the object size is reasonable. |
| |
| (ada_value_primitive_packed_val): Use correct location in target |
| buffer for extracting packed record fields that are themselves records. |
| |
| (add_defn_to_vec): Do not try to replace a stub type by its full |
| type. Avoids a potential infinite loop. |
| |
| (ada_lookup_symbol): Move return incorrectly placed return statement, |
| causing a loop that should be scanning all object files to only |
| scan the first one. |
| |
| (ada_tag_name_2): New function. |
| (ada_tag_name_1): If no 'tsd' field found in the dispatching table, |
| use alternative representation. |
| |
| (ada_find_renaming_symbol): Strip the function name suffix when |
| computing the XR type name. |
| |
| (ada_to_fixed_type): Try determining the tag only if we have the |
| object's address. |
| (to_fixed_array_type): Add comments. |
| |
| (ada_check_typedef): Replace expression checking whether the given |
| type is a stub or not by a "call" to TYPE_STUB. Clearer and more |
| consistent. |
| |
| * ada-lang.h (ADA_KNOWN_AUXILIARY_FUNCTION_NAME_PATTERNS): Allow |
| '$' in addition to '.' for runtime auxiliary function name suffixes. |
| See changes to ada_decode above. |
| |
| (struct task_control_block): Add field called_task. (This change is |
| to keep synchronized with our local sources; it does not affect the |
| public version yet.) |
| |
| * ada-typeprint.c (ada_print_type): Use int_string for printing |
| modulus of modular type. |
| |
| (print_range): Trivial editorial comment fix. |
| |
| * ada-valprint.c (ada_emit_char): Use normal Ada syntax for |
| double quote in string. |
| |
| 2006-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c: Add 2006 to list of copyright years in file header. |
| |
| 2006-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year to 2006. |
| |
| 2006-01-01 Roger Sayle <roger@eyesopen.com> |
| Elena Zannoni <ezannoni@redhat.com> |
| |
| PR symtab/1651 |
| * xcoffread.c (xcoff_next_symbol_text): Check this_symtab_psymtab |
| for NULL before assigning this_symtab_psymtab->objfile to objfile. |
| (scan_xcoff_symtab): Initialize next_symbol_text_func. |
| (Committed by Jim Blandy) |
| |
| For older changes see ChangeLog-2005. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
