| /* MIPS-specific support for 64-bit ELF |
| Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
| Free Software Foundation, Inc. |
| Ian Lance Taylor, Cygnus Support |
| Linker support added by Mark Mitchell, CodeSourcery, LLC. |
| <mark@codesourcery.com> |
| |
| This file is part of BFD, the Binary File Descriptor library. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| |
| /* This file supports the 64-bit MIPS ELF ABI. |
| |
| The MIPS 64-bit ELF ABI uses an unusual reloc format. This file |
| overrides the usual ELF reloc handling, and handles reading and |
| writing the relocations here. */ |
| |
| /* TODO: Many things are unsupported, even if there is some code for it |
| . (which was mostly stolen from elf32-mips.c and slightly adapted). |
| . |
| . - Relocation handling for REL relocs is wrong in many cases and |
| . generally untested. |
| . - Relocation handling for RELA relocs related to GOT support are |
| . also likely to be wrong. |
| . - Support for MIPS16 is only partially implemented. |
| . - Embedded PIC is only partially implemented (is it needed?). |
| . - Combined relocs with RSS_* entries are unsupported. |
| . - The whole GOT handling for NewABI is missing, some parts of |
| . the OldABI version is still lying around and shold be removed. |
| */ |
| |
| #include "bfd.h" |
| #include "sysdep.h" |
| #include "libbfd.h" |
| #include "aout/ar.h" |
| #include "bfdlink.h" |
| #include "genlink.h" |
| #include "elf-bfd.h" |
| #include "elf/mips.h" |
| |
| /* Get the ECOFF swapping routines. The 64-bit ABI is not supposed to |
| use ECOFF. However, we support it anyhow for an easier changeover. */ |
| #include "coff/sym.h" |
| #include "coff/symconst.h" |
| #include "coff/internal.h" |
| #include "coff/ecoff.h" |
| /* The 64 bit versions of the mdebug data structures are in alpha.h. */ |
| #include "coff/alpha.h" |
| #define ECOFF_SIGNED_64 |
| #include "ecoffswap.h" |
| |
| struct mips_elf64_link_hash_entry; |
| |
| static void mips_elf64_swap_reloc_in |
| PARAMS ((bfd *, const Elf64_Mips_External_Rel *, |
| Elf64_Mips_Internal_Rel *)); |
| static void mips_elf64_swap_reloca_in |
| PARAMS ((bfd *, const Elf64_Mips_External_Rela *, |
| Elf64_Mips_Internal_Rela *)); |
| static void mips_elf64_swap_reloc_out |
| PARAMS ((bfd *, const Elf64_Mips_Internal_Rel *, |
| Elf64_Mips_External_Rel *)); |
| static void mips_elf64_swap_reloca_out |
| PARAMS ((bfd *, const Elf64_Mips_Internal_Rela *, |
| Elf64_Mips_External_Rela *)); |
| static void mips_elf64_be_swap_reloc_in |
| PARAMS ((bfd *, const bfd_byte *, Elf_Internal_Rel *)); |
| static void mips_elf64_be_swap_reloc_out |
| PARAMS ((bfd *, const Elf_Internal_Rel *, bfd_byte *)); |
| static void mips_elf64_be_swap_reloca_in |
| PARAMS ((bfd *, const bfd_byte *, Elf_Internal_Rela *)); |
| static void mips_elf64_be_swap_reloca_out |
| PARAMS ((bfd *, const Elf_Internal_Rela *, bfd_byte *)); |
| static bfd_vma mips_elf64_high PARAMS ((bfd_vma)); |
| static bfd_vma mips_elf64_higher PARAMS ((bfd_vma)); |
| static bfd_vma mips_elf64_highest PARAMS ((bfd_vma)); |
| static reloc_howto_type *mips_elf64_reloc_type_lookup |
| PARAMS ((bfd *, bfd_reloc_code_real_type)); |
| static void mips_elf64_info_to_howto_rel |
| PARAMS ((bfd *, arelent *, Elf64_Internal_Rel *)); |
| static void mips_elf64_info_to_howto_rela |
| PARAMS ((bfd *, arelent *, Elf64_Internal_Rela *)); |
| static long mips_elf64_get_reloc_upper_bound PARAMS ((bfd *, asection *)); |
| static boolean mips_elf64_slurp_one_reloc_table |
| PARAMS ((bfd *, asection *, asymbol **, const Elf_Internal_Shdr *)); |
| static boolean mips_elf64_slurp_reloc_table |
| PARAMS ((bfd *, asection *, asymbol **, boolean)); |
| static void mips_elf64_write_relocs PARAMS ((bfd *, asection *, PTR)); |
| static void mips_elf64_write_rel |
| PARAMS((bfd *, asection *, Elf_Internal_Shdr *, int *, PTR)); |
| static void mips_elf64_write_rela |
| PARAMS((bfd *, asection *, Elf_Internal_Shdr *, int *, PTR)); |
| static struct bfd_hash_entry *mips_elf64_link_hash_newfunc |
| PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *, const char *)); |
| static bfd_reloc_status_type mips_elf64_hi16_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_higher_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_highest_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_gprel16_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_gprel16_reloca |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_literal_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_gprel32_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_shift6_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static bfd_reloc_status_type mips_elf64_got16_reloc |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| static boolean mips_elf64_assign_gp PARAMS ((bfd *, bfd_vma *)); |
| static bfd_reloc_status_type mips_elf64_final_gp |
| PARAMS ((bfd *, asymbol *, boolean, char **, bfd_vma *)); |
| static bfd_reloc_status_type gprel16_with_gp |
| PARAMS ((bfd *, asymbol *, arelent *, asection *, boolean, PTR, bfd_vma)); |
| static int mips_elf64_additional_program_headers PARAMS ((bfd *)); |
| static struct bfd_link_hash_table *mips_elf64_link_hash_table_create |
| PARAMS((bfd *)); |
| static bfd_vma mips_elf64_got_offset_from_index |
| PARAMS ((bfd *, bfd *, bfd_vma)); |
| static struct mips_elf64_got_info *_mips_elf64_got_info |
| PARAMS ((bfd *, asection **)); |
| static bfd_vma mips_elf64_sign_extend PARAMS ((bfd_vma, int)); |
| static boolean mips_elf64_overflow_p PARAMS ((bfd_vma, int)); |
| static bfd_vma mips_elf64_global_got_index |
| PARAMS ((bfd *, struct elf_link_hash_entry *)); |
| static boolean mips_elf64_sort_hash_table_f |
| PARAMS ((struct mips_elf64_link_hash_entry *, PTR)); |
| static boolean mips_elf64_sort_hash_table |
| PARAMS ((struct bfd_link_info *, unsigned long)); |
| static void mips_elf64_swap_msym_out |
| PARAMS ((bfd *, const Elf32_Internal_Msym *, Elf32_External_Msym *)); |
| static bfd_vma mips_elf64_create_local_got_entry |
| PARAMS ((bfd *abfd, struct mips_elf64_got_info *, asection *, |
| bfd_vma value)); |
| static bfd_vma mips_elf64_local_got_index |
| PARAMS ((bfd *, struct bfd_link_info *, bfd_vma)); |
| static bfd_vma mips_elf64_got_page |
| PARAMS ((bfd *, struct bfd_link_info *, bfd_vma, bfd_vma *)); |
| static bfd_vma mips_elf64_got16_entry |
| PARAMS ((bfd *, struct bfd_link_info *, bfd_vma, boolean)); |
| static boolean mips_elf64_local_relocation_p |
| PARAMS ((bfd *, const Elf_Internal_Rela *, asection **, boolean)); |
| static const Elf_Internal_Rela *mips_elf64_next_relocation |
| PARAMS ((unsigned int, const Elf_Internal_Rela *, |
| const Elf_Internal_Rela *)); |
| static boolean mips_elf64_create_dynamic_relocation |
| PARAMS ((bfd *, struct bfd_link_info *, const Elf_Internal_Rela *, |
| struct mips_elf64_link_hash_entry *, asection *, bfd_vma, |
| bfd_vma *, asection *)); |
| static bfd_reloc_status_type mips_elf64_calculate_relocation |
| PARAMS ((bfd *, bfd *, asection *, struct bfd_link_info *, |
| const Elf_Internal_Rela *, bfd_vma, reloc_howto_type *, |
| Elf_Internal_Sym *, asection **, bfd_vma *, const char **, |
| boolean *)); |
| static bfd_vma mips_elf64_obtain_contents |
| PARAMS ((reloc_howto_type *, const Elf_Internal_Rela *, bfd *, bfd_byte *)); |
| static boolean mips_elf64_perform_relocation |
| PARAMS ((struct bfd_link_info *, reloc_howto_type *, |
| const Elf_Internal_Rela *, bfd_vma, |
| bfd *, asection *, bfd_byte *, boolean)); |
| static boolean mips_elf64_relocate_section |
| PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, |
| Elf_Internal_Rela *, Elf_Internal_Sym *, asection **)); |
| boolean mips_elf64_create_dynamic_sections |
| PARAMS ((bfd *, struct bfd_link_info *)); |
| boolean mips_elf64_adjust_dynamic_symbol |
| PARAMS ((struct bfd_link_info *, struct elf_link_hash_entry *h)); |
| boolean mips_elf64_always_size_sections |
| PARAMS ((bfd *, struct bfd_link_info *)); |
| static boolean mips_elf64_check_mips16_stubs |
| PARAMS ((struct mips_elf64_link_hash_entry *, PTR)); |
| boolean mips_elf64_size_dynamic_sections |
| PARAMS ((bfd *, struct bfd_link_info *)); |
| boolean mips_elf64_finish_dynamic_symbol |
| PARAMS ((bfd *, struct bfd_link_info *, struct elf_link_hash_entry *, |
| Elf_Internal_Sym *)); |
| boolean mips_elf64_finish_dynamic_sections |
| PARAMS ((bfd *, struct bfd_link_info *info)); |
| asection *mips_elf64_gc_mark_hook |
| PARAMS ((bfd *, struct bfd_link_info *, Elf_Internal_Rela *, |
| struct elf_link_hash_entry *, Elf_Internal_Sym *)); |
| boolean mips_elf64_gc_sweep_hook |
| PARAMS ((bfd *, struct bfd_link_info *, asection *, |
| const Elf_Internal_Rela *)); |
| static boolean mips_elf64_create_got_section |
| PARAMS ((bfd *, struct bfd_link_info *)); |
| static boolean mips_elf64_record_global_got_symbol |
| PARAMS ((struct elf_link_hash_entry *, struct bfd_link_info *, |
| struct mips_elf64_got_info *)); |
| static asection *mips_elf64_create_msym_section PARAMS((bfd *)); |
| static void mips_elf64_allocate_dynamic_relocations |
| PARAMS ((bfd *, unsigned int)); |
| static boolean mips_elf64_stub_section_p PARAMS ((bfd *, asection *)); |
| boolean mips_elf64_check_relocs |
| PARAMS ((bfd *, struct bfd_link_info *, asection *, |
| const Elf_Internal_Rela *)); |
| static boolean mips_elf64_output_extsym |
| PARAMS ((struct mips_elf64_link_hash_entry *, PTR)); |
| static void mips_elf64_swap_gptab_in |
| PARAMS ((bfd *, const Elf32_External_gptab *, Elf32_gptab *)); |
| static void mips_elf64_swap_gptab_out |
| PARAMS ((bfd *, const Elf32_gptab *, Elf32_External_gptab *)); |
| static int gptab_compare PARAMS ((const PTR, const PTR)); |
| boolean mips_elf64_final_link PARAMS ((bfd *, struct bfd_link_info *)); |
| |
| extern const bfd_target bfd_elf64_bigmips_vec; |
| extern const bfd_target bfd_elf64_littlemips_vec; |
| |
| static bfd_vma prev_reloc_addend = 0; |
| static bfd_size_type prev_reloc_address = 0; |
| |
| /* Whether we are trying to be compatible with IRIX6 (or little endianers |
| which are otherwise IRIX-ABI compliant). */ |
| #define SGI_COMPAT(abfd) \ |
| ((abfd->xvec == &bfd_elf64_bigmips_vec) \ |
| || (abfd->xvec == &bfd_elf64_littlemips_vec) ? true : false) |
| |
| /* In case we're on a 32-bit machine, construct a 64-bit "-1" value |
| from smaller values. Start with zero, widen, *then* decrement. */ |
| #define MINUS_ONE (((bfd_vma)0) - 1) |
| |
| /* The number of local .got entries we reserve. */ |
| #define MIPS_RESERVED_GOTNO (2) |
| |
| /* Instructions which appear in a stub. */ |
| #define ELF_MIPS_GP_OFFSET(abfd) 0x7ff0 |
| #define STUB_LW 0xdf998010 /* ld t9,0x8010(gp) */ |
| #define STUB_MOVE 0x03e07825 /* move t7,ra */ |
| #define STUB_JALR 0x0320f809 /* jal t9 */ |
| #define STUB_LI16 0x34180000 /* ori t8,zero,0 */ |
| #define MIPS_FUNCTION_STUB_SIZE (16) |
| |
| /* The relocation table used for SHT_REL sections. */ |
| |
| #define UNUSED_RELOC(num) { num, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } |
| |
| static reloc_howto_type mips_elf64_howto_table_rel[] = |
| { |
| /* No relocation. */ |
| HOWTO (R_MIPS_NONE, /* type */ |
| 0, /* rightshift */ |
| 0, /* size (0 = byte, 1 = short, 2 = long) */ |
| 0, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_NONE", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 16 bit relocation. */ |
| HOWTO (R_MIPS_16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32 bit relocation. */ |
| HOWTO (R_MIPS_32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_32", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32 bit symbol relative relocation. */ |
| HOWTO (R_MIPS_REL32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_REL32", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 26 bit jump address. */ |
| HOWTO (R_MIPS_26, /* type */ |
| 2, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 26, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| /* This needs complex overflow |
| detection, because the upper 36 |
| bits must match the PC + 4. */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_26", /* name */ |
| true, /* partial_inplace */ |
| 0x03ffffff, /* src_mask */ |
| 0x03ffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* High 16 bits of symbol value. */ |
| HOWTO (R_MIPS_HI16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_HI16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Low 16 bits of symbol value. */ |
| HOWTO (R_MIPS_LO16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_LO16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* GP relative reference. */ |
| HOWTO (R_MIPS_GPREL16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| mips_elf64_gprel16_reloc, /* special_function */ |
| "R_MIPS_GPREL16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Reference to literal section. */ |
| HOWTO (R_MIPS_LITERAL, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| mips_elf64_literal_reloc, /* special_function */ |
| "R_MIPS_LITERAL", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Reference to global offset table. */ |
| HOWTO (R_MIPS_GOT16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| mips_elf64_got16_reloc, /* special_function */ |
| "R_MIPS_GOT16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 16 bit PC relative reference. */ |
| HOWTO (R_MIPS_PC16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| true, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_PC16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 16 bit call through global offset table. */ |
| /* FIXME: This is not handled correctly. */ |
| HOWTO (R_MIPS_CALL16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_CALL16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32 bit GP relative reference. */ |
| HOWTO (R_MIPS_GPREL32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| mips_elf64_gprel32_reloc, /* special_function */ |
| "R_MIPS_GPREL32", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| UNUSED_RELOC (13), |
| UNUSED_RELOC (14), |
| UNUSED_RELOC (15), |
| |
| /* A 5 bit shift field. */ |
| HOWTO (R_MIPS_SHIFT5, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 5, /* bitsize */ |
| false, /* pc_relative */ |
| 6, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_SHIFT5", /* name */ |
| true, /* partial_inplace */ |
| 0x000007c0, /* src_mask */ |
| 0x000007c0, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* A 6 bit shift field. */ |
| HOWTO (R_MIPS_SHIFT6, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 6, /* bitsize */ |
| false, /* pc_relative */ |
| 6, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| mips_elf64_shift6_reloc, /* special_function */ |
| "R_MIPS_SHIFT6", /* name */ |
| true, /* partial_inplace */ |
| 0x000007c4, /* src_mask */ |
| 0x000007c4, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 64 bit relocation. */ |
| HOWTO (R_MIPS_64, /* type */ |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_64", /* name */ |
| true, /* partial_inplace */ |
| MINUS_ONE, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Displacement in the global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_DISP, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_DISP", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Displacement to page pointer in the global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_PAGE, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_PAGE", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Offset from page pointer in the global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_OFST, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_OFST", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* High 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_HI16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_HI16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Low 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_LO16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_LO16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 64 bit substraction. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_SUB, /* type */ |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_SUB", /* name */ |
| true, /* partial_inplace */ |
| MINUS_ONE, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Insert the addend as an instruction. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_INSERT_A, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_INSERT_A", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Insert the addend as an instruction, and change all relocations |
| to refer to the old instruction at the address. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_INSERT_B, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_INSERT_B", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Delete a 32 bit instruction. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_DELETE, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_DELETE", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Get the higher value of a 64 bit addend. */ |
| HOWTO (R_MIPS_HIGHER, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| mips_elf64_higher_reloc, /* special_function */ |
| "R_MIPS_HIGHER", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Get the highest value of a 64 bit addend. */ |
| HOWTO (R_MIPS_HIGHEST, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| mips_elf64_highest_reloc, /* special_function */ |
| "R_MIPS_HIGHEST", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* High 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_CALL_HI16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_CALL_HI16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Low 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_CALL_LO16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_CALL_LO16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Section displacement, used by an associated event location section. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_SCN_DISP, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_SCN_DISP", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_MIPS_REL16, /* type */ |
| 0, /* rightshift */ |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_REL16", /* name */ |
| true, /* partial_inplace */ |
| 0xffff, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* These two are obsolete. */ |
| EMPTY_HOWTO (R_MIPS_ADD_IMMEDIATE), |
| EMPTY_HOWTO (R_MIPS_PJUMP), |
| |
| /* Similiar to R_MIPS_REL32, but used for relocations in a GOT section. |
| It must be used for multigot GOT's (and only there). */ |
| HOWTO (R_MIPS_RELGOT, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_RELGOT", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Protected jump conversion. This is an optimization hint. No |
| relocation is required for correctness. */ |
| HOWTO (R_MIPS_JALR, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_JALR", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x00000000, /* dst_mask */ |
| false), /* pcrel_offset */ |
| }; |
| |
| /* The relocation table used for SHT_RELA sections. */ |
| |
| static reloc_howto_type mips_elf64_howto_table_rela[] = |
| { |
| /* No relocation. */ |
| HOWTO (R_MIPS_NONE, /* type */ |
| 0, /* rightshift */ |
| 0, /* size (0 = byte, 1 = short, 2 = long) */ |
| 0, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_NONE", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 16 bit relocation. */ |
| HOWTO (R_MIPS_16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32 bit relocation. */ |
| HOWTO (R_MIPS_32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_32", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32 bit symbol relative relocation. */ |
| HOWTO (R_MIPS_REL32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_REL32", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 26 bit jump address. */ |
| HOWTO (R_MIPS_26, /* type */ |
| 2, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 26, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| /* This needs complex overflow |
| detection, because the upper 36 |
| bits must match the PC + 4. */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_26", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x03ffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* R_MIPS_HI16 and R_MIPS_LO16 are unsupported for 64 bit REL. */ |
| /* High 16 bits of symbol value. */ |
| HOWTO (R_MIPS_HI16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_HI16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Low 16 bits of symbol value. */ |
| HOWTO (R_MIPS_LO16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_LO16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* GP relative reference. */ |
| HOWTO (R_MIPS_GPREL16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| mips_elf64_gprel16_reloca, /* special_function */ |
| "R_MIPS_GPREL16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Reference to literal section. */ |
| HOWTO (R_MIPS_LITERAL, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| mips_elf64_literal_reloc, /* special_function */ |
| "R_MIPS_LITERAL", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Reference to global offset table. */ |
| /* FIXME: This is not handled correctly. */ |
| HOWTO (R_MIPS_GOT16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 16 bit PC relative reference. */ |
| HOWTO (R_MIPS_PC16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| true, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_PC16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 16 bit call through global offset table. */ |
| /* FIXME: This is not handled correctly. */ |
| HOWTO (R_MIPS_CALL16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_CALL16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32 bit GP relative reference. */ |
| HOWTO (R_MIPS_GPREL32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| mips_elf64_gprel32_reloc, /* special_function */ |
| "R_MIPS_GPREL32", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| UNUSED_RELOC (13), |
| UNUSED_RELOC (14), |
| UNUSED_RELOC (15), |
| |
| /* A 5 bit shift field. */ |
| HOWTO (R_MIPS_SHIFT5, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 5, /* bitsize */ |
| false, /* pc_relative */ |
| 6, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_SHIFT5", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x000007c0, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* A 6 bit shift field. */ |
| HOWTO (R_MIPS_SHIFT6, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 6, /* bitsize */ |
| false, /* pc_relative */ |
| 6, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| mips_elf64_shift6_reloc, /* special_function */ |
| "R_MIPS_SHIFT6", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x000007c4, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 64 bit relocation. */ |
| HOWTO (R_MIPS_64, /* type */ |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_64", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Displacement in the global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_DISP, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_DISP", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Displacement to page pointer in the global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_PAGE, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_PAGE", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Offset from page pointer in the global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_OFST, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_OFST", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* High 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_HI16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_HI16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Low 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_GOT_LO16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_GOT_LO16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 64 bit substraction. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_SUB, /* type */ |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_SUB", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Insert the addend as an instruction. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_INSERT_A, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_INSERT_A", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Insert the addend as an instruction, and change all relocations |
| to refer to the old instruction at the address. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_INSERT_B, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_INSERT_B", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Delete a 32 bit instruction. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_DELETE, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_DELETE", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Get the higher value of a 64 bit addend. */ |
| HOWTO (R_MIPS_HIGHER, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_HIGHER", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Get the highest value of a 64 bit addend. */ |
| HOWTO (R_MIPS_HIGHEST, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_HIGHEST", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* High 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_CALL_HI16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_CALL_HI16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Low 16 bits of displacement in global offset table. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_CALL_LO16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_CALL_LO16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Section displacement, used by an associated event location section. */ |
| /* FIXME: Not handled correctly. */ |
| HOWTO (R_MIPS_SCN_DISP, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_SCN_DISP", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_MIPS_REL16, /* type */ |
| 0, /* rightshift */ |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_REL16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* These two are obsolete. */ |
| EMPTY_HOWTO (R_MIPS_ADD_IMMEDIATE), |
| EMPTY_HOWTO (R_MIPS_PJUMP), |
| |
| /* Similiar to R_MIPS_REL32, but used for relocations in a GOT section. |
| It must be used for multigot GOT's (and only there). */ |
| HOWTO (R_MIPS_RELGOT, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_RELGOT", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Protected jump conversion. This is an optimization hint. No |
| relocation is required for correctness. */ |
| HOWTO (R_MIPS_JALR, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_MIPS_JALR", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x00000000, /* dst_mask */ |
| false), /* pcrel_offset */ |
| }; |
| |
| /* Swap in a MIPS 64-bit Rel reloc. */ |
| |
| static void |
| mips_elf64_swap_reloc_in (abfd, src, dst) |
| bfd *abfd; |
| const Elf64_Mips_External_Rel *src; |
| Elf64_Mips_Internal_Rel *dst; |
| { |
| dst->r_offset = H_GET_64 (abfd, src->r_offset); |
| dst->r_sym = H_GET_32 (abfd, src->r_sym); |
| dst->r_ssym = H_GET_8 (abfd, src->r_ssym); |
| dst->r_type3 = H_GET_8 (abfd, src->r_type3); |
| dst->r_type2 = H_GET_8 (abfd, src->r_type2); |
| dst->r_type = H_GET_8 (abfd, src->r_type); |
| } |
| |
| /* Swap in a MIPS 64-bit Rela reloc. */ |
| |
| static void |
| mips_elf64_swap_reloca_in (abfd, src, dst) |
| bfd *abfd; |
| const Elf64_Mips_External_Rela *src; |
| Elf64_Mips_Internal_Rela *dst; |
| { |
| dst->r_offset = H_GET_64 (abfd, src->r_offset); |
| dst->r_sym = H_GET_32 (abfd, src->r_sym); |
| dst->r_ssym = H_GET_8 (abfd, src->r_ssym); |
| dst->r_type3 = H_GET_8 (abfd, src->r_type3); |
| dst->r_type2 = H_GET_8 (abfd, src->r_type2); |
| dst->r_type = H_GET_8 (abfd, src->r_type); |
| dst->r_addend = H_GET_S64 (abfd, src->r_addend); |
| } |
| |
| /* Swap out a MIPS 64-bit Rel reloc. */ |
| |
| static void |
| mips_elf64_swap_reloc_out (abfd, src, dst) |
| bfd *abfd; |
| const Elf64_Mips_Internal_Rel *src; |
| Elf64_Mips_External_Rel *dst; |
| { |
| H_PUT_64 (abfd, src->r_offset, dst->r_offset); |
| H_PUT_32 (abfd, src->r_sym, dst->r_sym); |
| H_PUT_8 (abfd, src->r_ssym, dst->r_ssym); |
| H_PUT_8 (abfd, src->r_type3, dst->r_type3); |
| H_PUT_8 (abfd, src->r_type2, dst->r_type2); |
| H_PUT_8 (abfd, src->r_type, dst->r_type); |
| } |
| |
| /* Swap out a MIPS 64-bit Rela reloc. */ |
| |
| static void |
| mips_elf64_swap_reloca_out (abfd, src, dst) |
| bfd *abfd; |
| const Elf64_Mips_Internal_Rela *src; |
| Elf64_Mips_External_Rela *dst; |
| { |
| H_PUT_64 (abfd, src->r_offset, dst->r_offset); |
| H_PUT_32 (abfd, src->r_sym, dst->r_sym); |
| H_PUT_8 (abfd, src->r_ssym, dst->r_ssym); |
| H_PUT_8 (abfd, src->r_type3, dst->r_type3); |
| H_PUT_8 (abfd, src->r_type2, dst->r_type2); |
| H_PUT_8 (abfd, src->r_type, dst->r_type); |
| H_PUT_S64 (abfd, src->r_addend, dst->r_addend); |
| } |
| |
| /* Swap in a MIPS 64-bit Rel reloc. */ |
| |
| static void |
| mips_elf64_be_swap_reloc_in (abfd, src, dst) |
| bfd *abfd; |
| const bfd_byte *src; |
| Elf_Internal_Rel *dst; |
| { |
| Elf64_Mips_Internal_Rel mirel; |
| |
| mips_elf64_swap_reloc_in (abfd, |
| (const Elf64_Mips_External_Rel *) src, |
| &mirel); |
| |
| dst[0].r_offset = mirel.r_offset; |
| dst[0].r_info = ELF64_R_INFO (mirel.r_sym, mirel.r_type); |
| dst[1].r_offset = mirel.r_offset; |
| dst[1].r_info = ELF64_R_INFO (mirel.r_ssym, mirel.r_type2); |
| dst[2].r_offset = mirel.r_offset; |
| dst[2].r_info = ELF64_R_INFO (STN_UNDEF, mirel.r_type3); |
| } |
| |
| /* Swap in a MIPS 64-bit Rela reloc. */ |
| |
| static void |
| mips_elf64_be_swap_reloca_in (abfd, src, dst) |
| bfd *abfd; |
| const bfd_byte *src; |
| Elf_Internal_Rela *dst; |
| { |
| Elf64_Mips_Internal_Rela mirela; |
| |
| mips_elf64_swap_reloca_in (abfd, |
| (const Elf64_Mips_External_Rela *) src, |
| &mirela); |
| |
| dst[0].r_offset = mirela.r_offset; |
| dst[0].r_info = ELF64_R_INFO (mirela.r_sym, mirela.r_type); |
| dst[0].r_addend = mirela.r_addend; |
| dst[1].r_offset = mirela.r_offset; |
| dst[1].r_info = ELF64_R_INFO (mirela.r_ssym, mirela.r_type2); |
| dst[1].r_addend = 0; |
| dst[2].r_offset = mirela.r_offset; |
| dst[2].r_info = ELF64_R_INFO (STN_UNDEF, mirela.r_type3); |
| dst[2].r_addend = 0; |
| } |
| |
| /* Swap out a MIPS 64-bit Rel reloc. */ |
| |
| static void |
| mips_elf64_be_swap_reloc_out (abfd, src, dst) |
| bfd *abfd; |
| const Elf_Internal_Rel *src; |
| bfd_byte *dst; |
| { |
| Elf64_Mips_Internal_Rel mirel; |
| |
| mirel.r_offset = src[0].r_offset; |
| BFD_ASSERT(src[0].r_offset == src[1].r_offset); |
| BFD_ASSERT(src[0].r_offset == src[2].r_offset); |
| |
| mirel.r_type = ELF64_MIPS_R_TYPE (src[0].r_info); |
| mirel.r_sym = ELF64_R_SYM (src[0].r_info); |
| mirel.r_type2 = ELF64_MIPS_R_TYPE2 (src[1].r_info); |
| mirel.r_ssym = ELF64_MIPS_R_SSYM (src[1].r_info); |
| mirel.r_type3 = ELF64_MIPS_R_TYPE3 (src[2].r_info); |
| |
| mips_elf64_swap_reloc_out (abfd, &mirel, |
| (Elf64_Mips_External_Rel *) dst); |
| } |
| |
| /* Swap out a MIPS 64-bit Rela reloc. */ |
| |
| static void |
| mips_elf64_be_swap_reloca_out (abfd, src, dst) |
| bfd *abfd; |
| const Elf_Internal_Rela *src; |
| bfd_byte *dst; |
| { |
| Elf64_Mips_Internal_Rela mirela; |
| |
| mirela.r_offset = src[0].r_offset; |
| BFD_ASSERT(src[0].r_offset == src[1].r_offset); |
| BFD_ASSERT(src[0].r_offset == src[2].r_offset); |
| |
| mirela.r_type = ELF64_MIPS_R_TYPE (src[0].r_info); |
| mirela.r_sym = ELF64_R_SYM (src[0].r_info); |
| mirela.r_addend = src[0].r_addend; |
| BFD_ASSERT(src[1].r_addend == 0); |
| BFD_ASSERT(src[2].r_addend == 0); |
| |
| mirela.r_type2 = ELF64_MIPS_R_TYPE2 (src[1].r_info); |
| mirela.r_ssym = ELF64_MIPS_R_SSYM (src[1].r_info); |
| mirela.r_type3 = ELF64_MIPS_R_TYPE3 (src[2].r_info); |
| |
| mips_elf64_swap_reloca_out (abfd, &mirela, |
| (Elf64_Mips_External_Rela *) dst); |
| } |
| |
| /* Calculate the %high function. */ |
| |
| static bfd_vma |
| mips_elf64_high (value) |
| bfd_vma value; |
| { |
| return ((value + (bfd_vma) 0x8000) >> 16) & 0xffff; |
| } |
| |
| /* Calculate the %higher function. */ |
| |
| static bfd_vma |
| mips_elf64_higher (value) |
| bfd_vma value; |
| { |
| return ((value + (bfd_vma) 0x80008000) >> 32) & 0xffff; |
| } |
| |
| /* Calculate the %highest function. */ |
| |
| static bfd_vma |
| mips_elf64_highest (value) |
| bfd_vma value; |
| { |
| return ((value + (bfd_vma) 0x800080008000) >> 48) & 0xffff; |
| } |
| |
| /* Do a R_MIPS_HI16 relocation. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_hi16_reloc (abfd, |
| reloc_entry, |
| symbol, |
| data, |
| input_section, |
| output_bfd, |
| error_message) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data ATTRIBUTE_UNUSED; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message ATTRIBUTE_UNUSED; |
| { |
| /* If we're relocating, and this is an external symbol, we don't |
| want to change anything. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && (! reloc_entry->howto->partial_inplace |
| || reloc_entry->addend == 0)) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| if (((reloc_entry->addend & 0xffff) + 0x8000) & ~0xffff) |
| reloc_entry->addend += 0x8000; |
| |
| return bfd_reloc_continue; |
| } |
| |
| /* Do a R_MIPS_HIGHER relocation. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_higher_reloc (abfd, |
| reloc_entry, |
| symbol, |
| data, |
| input_section, |
| output_bfd, |
| error_message) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data ATTRIBUTE_UNUSED; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message ATTRIBUTE_UNUSED; |
| { |
| /* If we're relocating, and this is an external symbol, we don't |
| want to change anything. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && (! reloc_entry->howto->partial_inplace |
| || reloc_entry->addend == 0)) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| if (((reloc_entry->addend & 0xffffffff) + 0x80008000) |
| & ~0xffffffff) |
| reloc_entry->addend += 0x80008000; |
| |
| return bfd_reloc_continue; |
| } |
| |
| /* Do a R_MIPS_HIGHEST relocation. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_highest_reloc (abfd, |
| reloc_entry, |
| symbol, |
| data, |
| input_section, |
| output_bfd, |
| error_message) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data ATTRIBUTE_UNUSED; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message ATTRIBUTE_UNUSED; |
| { |
| /* If we're relocating, and this is an external symbol, we don't |
| want to change anything. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && (! reloc_entry->howto->partial_inplace |
| || reloc_entry->addend == 0)) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| if (((reloc_entry->addend & 0xffffffffffff) + 0x800080008000) |
| & ~0xffffffffffff) |
| reloc_entry->addend += 0x800080008000; |
| |
| return bfd_reloc_continue; |
| } |
| |
| /* Do a R_MIPS_GOT16 reloc. This is a reloc against the global offset |
| table used for PIC code. If the symbol is an external symbol, the |
| instruction is modified to contain the offset of the appropriate |
| entry in the global offset table. If the symbol is a section |
| symbol, the next reloc is a R_MIPS_LO16 reloc. The two 16 bit |
| addends are combined to form the real addend against the section |
| symbol; the GOT16 is modified to contain the offset of an entry in |
| the global offset table, and the LO16 is modified to offset it |
| appropriately. Thus an offset larger than 16 bits requires a |
| modified value in the global offset table. |
| |
| This implementation suffices for the assembler, but the linker does |
| not yet know how to create global offset tables. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_got16_reloc (abfd, |
| reloc_entry, |
| symbol, |
| data, |
| input_section, |
| output_bfd, |
| error_message) |
| bfd *abfd; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message; |
| { |
| /* If we're relocating, and this an external symbol, we don't want |
| to change anything. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && reloc_entry->addend == 0) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| /* If we're relocating, and this is a local symbol, we can handle it |
| just like HI16. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) != 0) |
| return mips_elf64_hi16_reloc (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, error_message); |
| |
| abort (); |
| } |
| |
| /* Set the GP value for OUTPUT_BFD. Returns false if this is a |
| dangerous relocation. */ |
| |
| static boolean |
| mips_elf64_assign_gp (output_bfd, pgp) |
| bfd *output_bfd; |
| bfd_vma *pgp; |
| { |
| unsigned int count; |
| asymbol **sym; |
| unsigned int i; |
| |
| /* If we've already figured out what GP will be, just return it. */ |
| *pgp = _bfd_get_gp_value (output_bfd); |
| if (*pgp) |
| return true; |
| |
| count = bfd_get_symcount (output_bfd); |
| sym = bfd_get_outsymbols (output_bfd); |
| |
| /* The linker script will have created a symbol named `_gp' with the |
| appropriate value. */ |
| if (sym == (asymbol **) NULL) |
| i = count; |
| else |
| { |
| for (i = 0; i < count; i++, sym++) |
| { |
| register CONST char *name; |
| |
| name = bfd_asymbol_name (*sym); |
| if (*name == '_' && strcmp (name, "_gp") == 0) |
| { |
| *pgp = bfd_asymbol_value (*sym); |
| _bfd_set_gp_value (output_bfd, *pgp); |
| break; |
| } |
| } |
| } |
| |
| if (i >= count) |
| { |
| /* Only get the error once. */ |
| *pgp = 4; |
| _bfd_set_gp_value (output_bfd, *pgp); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* We have to figure out the gp value, so that we can adjust the |
| symbol value correctly. We look up the symbol _gp in the output |
| BFD. If we can't find it, we're stuck. We cache it in the ELF |
| target data. We don't need to adjust the symbol value for an |
| external symbol if we are producing relocateable output. */ |
| |
| static bfd_reloc_status_type |
| mips_elf64_final_gp (output_bfd, symbol, relocateable, error_message, pgp) |
| bfd *output_bfd; |
| asymbol *symbol; |
| boolean relocateable; |
| char **error_message; |
| bfd_vma *pgp; |
| { |
| if (bfd_is_und_section (symbol->section) |
| && ! relocateable) |
| { |
| *pgp = 0; |
| return bfd_reloc_undefined; |
| } |
| |
| *pgp = _bfd_get_gp_value (output_bfd); |
| if (*pgp == 0 |
| && (! relocateable |
| || (symbol->flags & BSF_SECTION_SYM) != 0)) |
| { |
| if (relocateable) |
| { |
| /* Make up a value. */ |
| *pgp = symbol->section->output_section->vma + 0x4000; |
| _bfd_set_gp_value (output_bfd, *pgp); |
| } |
| else if (!mips_elf64_assign_gp (output_bfd, pgp)) |
| { |
| *error_message = |
| (char *) _("GP relative relocation when _gp not defined"); |
| return bfd_reloc_dangerous; |
| } |
| } |
| |
| return bfd_reloc_ok; |
| } |
| |
| /* Do a R_MIPS_GPREL16 relocation. This is a 16 bit value which must |
| become the offset from the gp register. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_gprel16_reloc (abfd, reloc_entry, symbol, data, input_section, |
| output_bfd, error_message) |
| bfd *abfd; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message; |
| { |
| boolean relocateable; |
| bfd_reloc_status_type ret; |
| bfd_vma gp; |
| |
| /* If we're relocating, and this is an external symbol with no |
| addend, we don't want to change anything. We will only have an |
| addend if this is a newly created reloc, not read from an ELF |
| file. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && reloc_entry->addend == 0) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| if (output_bfd != (bfd *) NULL) |
| relocateable = true; |
| else |
| { |
| relocateable = false; |
| output_bfd = symbol->section->output_section->owner; |
| } |
| |
| ret = mips_elf64_final_gp (output_bfd, symbol, relocateable, error_message, |
| &gp); |
| if (ret != bfd_reloc_ok) |
| return ret; |
| |
| return gprel16_with_gp (abfd, symbol, reloc_entry, input_section, |
| relocateable, data, gp); |
| } |
| |
| static bfd_reloc_status_type |
| gprel16_with_gp (abfd, symbol, reloc_entry, input_section, relocateable, data, |
| gp) |
| bfd *abfd; |
| asymbol *symbol; |
| arelent *reloc_entry; |
| asection *input_section; |
| boolean relocateable; |
| PTR data; |
| bfd_vma gp; |
| { |
| bfd_vma relocation; |
| unsigned long insn; |
| unsigned long val; |
| |
| if (bfd_is_com_section (symbol->section)) |
| relocation = 0; |
| else |
| relocation = symbol->value; |
| |
| relocation += symbol->section->output_section->vma; |
| relocation += symbol->section->output_offset; |
| |
| if (reloc_entry->address > input_section->_cooked_size) |
| return bfd_reloc_outofrange; |
| |
| insn = bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address); |
| |
| /* Set val to the offset into the section or symbol. */ |
| if (reloc_entry->howto->src_mask == 0) |
| { |
| /* This case occurs with the 64-bit MIPS ELF ABI. */ |
| val = reloc_entry->addend; |
| } |
| else |
| { |
| val = ((insn & 0xffff) + reloc_entry->addend) & 0xffff; |
| if (val & 0x8000) |
| val -= 0x10000; |
| } |
| |
| /* Adjust val for the final section location and GP value. If we |
| are producing relocateable output, we don't want to do this for |
| an external symbol. */ |
| if (! relocateable |
| || (symbol->flags & BSF_SECTION_SYM) != 0) |
| val += relocation - gp; |
| |
| insn = (insn & ~0xffff) | (val & 0xffff); |
| bfd_put_32 (abfd, insn, (bfd_byte *) data + reloc_entry->address); |
| |
| if (relocateable) |
| reloc_entry->address += input_section->output_offset; |
| |
| else if ((long) val >= 0x8000 || (long) val < -0x8000) |
| return bfd_reloc_overflow; |
| |
| return bfd_reloc_ok; |
| } |
| |
| /* Do a R_MIPS_GPREL16 RELA relocation. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_gprel16_reloca (abfd, reloc_entry, symbol, data, input_section, |
| output_bfd, error_message) |
| bfd *abfd; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data ATTRIBUTE_UNUSED; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message; |
| { |
| boolean relocateable; |
| bfd_vma gp; |
| |
| /* This works only for NewABI. */ |
| BFD_ASSERT (reloc_entry->howto->src_mask == 0); |
| |
| /* If we're relocating, and this is an external symbol with no |
| addend, we don't want to change anything. We will only have an |
| addend if this is a newly created reloc, not read from an ELF |
| file. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && reloc_entry->addend == 0) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| if (output_bfd != (bfd *) NULL) |
| relocateable = true; |
| else |
| { |
| relocateable = false; |
| output_bfd = symbol->section->output_section->owner; |
| } |
| |
| if (prev_reloc_address != reloc_entry->address) |
| prev_reloc_address = reloc_entry->address; |
| else |
| { |
| mips_elf64_final_gp (output_bfd, symbol, relocateable, error_message, |
| &gp); |
| prev_reloc_addend = reloc_entry->addend + reloc_entry->address - gp; |
| if (symbol->flags & BSF_LOCAL) |
| prev_reloc_addend += _bfd_get_gp_value (abfd); |
| /*fprintf(stderr, "Addend: %lx, Next Addend: %lx\n", reloc_entry->addend, prev_reloc_addend);*/ |
| } |
| |
| return bfd_reloc_ok; |
| } |
| |
| /* Do a R_MIPS_LITERAL relocation. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_literal_reloc (abfd, reloc_entry, symbol, data, input_section, |
| output_bfd, error_message) |
| bfd *abfd; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message; |
| { |
| /* If we're relocating, and this is an external symbol, we don't |
| want to change anything. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && (! reloc_entry->howto->partial_inplace |
| || reloc_entry->addend == 0)) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| /* FIXME: The entries in the .lit8 and .lit4 sections should be merged. |
| Currently we simply call mips_elf64_gprel16_reloc. */ |
| return mips_elf64_gprel16_reloc (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, error_message); |
| } |
| |
| /* Do a R_MIPS_GPREL32 relocation. Is this 32 bit value the offset |
| from the gp register? XXX */ |
| |
| bfd_reloc_status_type |
| mips_elf64_gprel32_reloc (abfd, |
| reloc_entry, |
| symbol, |
| data, |
| input_section, |
| output_bfd, |
| error_message) |
| bfd *abfd; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message; |
| { |
| boolean relocateable; |
| bfd_reloc_status_type ret; |
| bfd_vma gp; |
| bfd_vma relocation; |
| unsigned long val; |
| |
| /* If we're relocating, and this is an external symbol with no |
| addend, we don't want to change anything. We will only have an |
| addend if this is a newly created reloc, not read from an ELF |
| file. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && reloc_entry->addend == 0) |
| { |
| *error_message = (char *) |
| _("32bits gp relative relocation occurs for an external symbol"); |
| return bfd_reloc_outofrange; |
| } |
| |
| if (output_bfd != (bfd *) NULL) |
| { |
| relocateable = true; |
| gp = _bfd_get_gp_value (output_bfd); |
| } |
| else |
| { |
| relocateable = false; |
| output_bfd = symbol->section->output_section->owner; |
| |
| ret = mips_elf64_final_gp (output_bfd, symbol, relocateable, |
| error_message, &gp); |
| if (ret != bfd_reloc_ok) |
| return ret; |
| } |
| |
| if (bfd_is_com_section (symbol->section)) |
| relocation = 0; |
| else |
| relocation = symbol->value; |
| |
| relocation += symbol->section->output_section->vma; |
| relocation += symbol->section->output_offset; |
| |
| if (reloc_entry->address > input_section->_cooked_size) |
| return bfd_reloc_outofrange; |
| |
| if (reloc_entry->howto->src_mask == 0) |
| { |
| /* This case arises with the 64-bit MIPS ELF ABI. */ |
| val = 0; |
| } |
| else |
| val = bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address); |
| |
| /* Set val to the offset into the section or symbol. */ |
| val += reloc_entry->addend; |
| |
| /* Adjust val for the final section location and GP value. If we |
| are producing relocateable output, we don't want to do this for |
| an external symbol. */ |
| if (! relocateable |
| || (symbol->flags & BSF_SECTION_SYM) != 0) |
| val += relocation - gp; |
| |
| bfd_put_32 (abfd, val, (bfd_byte *) data + reloc_entry->address); |
| |
| if (relocateable) |
| reloc_entry->address += input_section->output_offset; |
| |
| return bfd_reloc_ok; |
| } |
| |
| /* Do a R_MIPS_SHIFT6 relocation. The MSB of the shift is stored at bit 2, |
| the rest is at bits 6-10. The bitpos alredy got right by the howto. */ |
| |
| bfd_reloc_status_type |
| mips_elf64_shift6_reloc (abfd, reloc_entry, symbol, data, input_section, |
| output_bfd, error_message) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| arelent *reloc_entry; |
| asymbol *symbol; |
| PTR data ATTRIBUTE_UNUSED; |
| asection *input_section; |
| bfd *output_bfd; |
| char **error_message ATTRIBUTE_UNUSED; |
| { |
| /* If we're relocating, and this is an external symbol, we don't |
| want to change anything. */ |
| if (output_bfd != (bfd *) NULL |
| && (symbol->flags & BSF_SECTION_SYM) == 0 |
| && (! reloc_entry->howto->partial_inplace |
| || reloc_entry->addend == 0)) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| reloc_entry->addend = (reloc_entry->addend & 0x00007c0) |
| | (reloc_entry->addend & 0x00000800) >> 9; |
| |
| return bfd_reloc_continue; |
| } |
| |
| static int |
| mips_elf64_additional_program_headers (abfd) |
| bfd *abfd; |
| { |
| int ret = 0; |
| |
| /* See if we need a PT_MIPS_OPTIONS segment. */ |
| if (bfd_get_section_by_name (abfd, ".MIPS.options")) |
| ++ret; |
| |
| return ret; |
| } |
| |
| /* Given a BFD reloc type, return a howto structure. */ |
| |
| static reloc_howto_type * |
| mips_elf64_reloc_type_lookup (abfd, code) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| bfd_reloc_code_real_type code; |
| { |
| /* FIXME: We default to RELA here instead of choosing the right |
| relocation variant. */ |
| reloc_howto_type *howto_table = mips_elf64_howto_table_rela; |
| |
| switch (code) |
| { |
| case BFD_RELOC_NONE: |
| return &howto_table[R_MIPS_NONE]; |
| case BFD_RELOC_16: |
| return &howto_table[R_MIPS_16]; |
| case BFD_RELOC_32: |
| return &howto_table[R_MIPS_32]; |
| case BFD_RELOC_64: |
| case BFD_RELOC_CTOR: |
| /* We need to handle these specially. Select the right |
| relocation (R_MIPS_32 or R_MIPS_64) based on the |
| size of addresses on this architecture. */ |
| if (bfd_arch_bits_per_address (abfd) == 32) |
| return &howto_table[R_MIPS_32]; |
| else |
| return &howto_table[R_MIPS_64]; |
| |
| case BFD_RELOC_16_PCREL: |
| return &howto_table[R_MIPS_PC16]; |
| case BFD_RELOC_HI16_S: |
| return &howto_table[R_MIPS_HI16]; |
| case BFD_RELOC_LO16: |
| return &howto_table[R_MIPS_LO16]; |
| case BFD_RELOC_GPREL16: |
| return &howto_table[R_MIPS_GPREL16]; |
| case BFD_RELOC_GPREL32: |
| return &howto_table[R_MIPS_GPREL32]; |
| case BFD_RELOC_MIPS_JMP: |
| return &howto_table[R_MIPS_26]; |
| case BFD_RELOC_MIPS_LITERAL: |
| return &howto_table[R_MIPS_LITERAL]; |
| case BFD_RELOC_MIPS_GOT16: |
| return &howto_table[R_MIPS_GOT16]; |
| case BFD_RELOC_MIPS_CALL16: |
| return &howto_table[R_MIPS_CALL16]; |
| case BFD_RELOC_MIPS_SHIFT5: |
| return &howto_table[R_MIPS_SHIFT5]; |
| case BFD_RELOC_MIPS_SHIFT6: |
| return &howto_table[R_MIPS_SHIFT6]; |
| case BFD_RELOC_MIPS_GOT_DISP: |
| return &howto_table[R_MIPS_GOT_DISP]; |
| case BFD_RELOC_MIPS_GOT_PAGE: |
| return &howto_table[R_MIPS_GOT_PAGE]; |
| case BFD_RELOC_MIPS_GOT_OFST: |
| return &howto_table[R_MIPS_GOT_OFST]; |
| case BFD_RELOC_MIPS_GOT_HI16: |
| return &howto_table[R_MIPS_GOT_HI16]; |
| case BFD_RELOC_MIPS_GOT_LO16: |
| return &howto_table[R_MIPS_GOT_LO16]; |
| case BFD_RELOC_MIPS_SUB: |
| return &howto_table[R_MIPS_SUB]; |
| case BFD_RELOC_MIPS_INSERT_A: |
| return &howto_table[R_MIPS_INSERT_A]; |
| case BFD_RELOC_MIPS_INSERT_B: |
| return &howto_table[R_MIPS_INSERT_B]; |
| case BFD_RELOC_MIPS_DELETE: |
| return &howto_table[R_MIPS_DELETE]; |
| case BFD_RELOC_MIPS_HIGHEST: |
| return &howto_table[R_MIPS_HIGHEST]; |
| case BFD_RELOC_MIPS_HIGHER: |
| return &howto_table[R_MIPS_HIGHER]; |
| case BFD_RELOC_MIPS_CALL_HI16: |
| return &howto_table[R_MIPS_CALL_HI16]; |
| case BFD_RELOC_MIPS_CALL_LO16: |
| return &howto_table[R_MIPS_CALL_LO16]; |
| case BFD_RELOC_MIPS_SCN_DISP: |
| return &howto_table[R_MIPS_SCN_DISP]; |
| case BFD_RELOC_MIPS_REL16: |
| return &howto_table[R_MIPS_REL16]; |
| /* Use of R_MIPS_ADD_IMMEDIATE and R_MIPS_PJUMP is deprecated. */ |
| case BFD_RELOC_MIPS_RELGOT: |
| return &howto_table[R_MIPS_RELGOT]; |
| case BFD_RELOC_MIPS_JALR: |
| return &howto_table[R_MIPS_JALR]; |
| /* |
| case BFD_RELOC_MIPS16_JMP: |
| return &elf_mips16_jump_howto; |
| case BFD_RELOC_MIPS16_GPREL: |
| return &elf_mips16_gprel_howto; |
| case BFD_RELOC_VTABLE_INHERIT: |
| return &elf_mips_gnu_vtinherit_howto; |
| case BFD_RELOC_VTABLE_ENTRY: |
| return &elf_mips_gnu_vtentry_howto; |
| case BFD_RELOC_PCREL_HI16_S: |
| return &elf_mips_gnu_rel_hi16; |
| case BFD_RELOC_PCREL_LO16: |
| return &elf_mips_gnu_rel_lo16; |
| case BFD_RELOC_16_PCREL_S2: |
| return &elf_mips_gnu_rel16_s2; |
| case BFD_RELOC_64_PCREL: |
| return &elf_mips_gnu_pcrel64; |
| case BFD_RELOC_32_PCREL: |
| return &elf_mips_gnu_pcrel32; |
| */ |
| default: |
| bfd_set_error (bfd_error_bad_value); |
| return NULL; |
| } |
| } |
| |
| /* Prevent relocation handling by bfd for MIPS ELF64. */ |
| |
| static void |
| mips_elf64_info_to_howto_rel (abfd, cache_ptr, dst) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| arelent *cache_ptr ATTRIBUTE_UNUSED; |
| Elf64_Internal_Rel *dst ATTRIBUTE_UNUSED; |
| { |
| BFD_ASSERT (0); |
| } |
| |
| static void |
| mips_elf64_info_to_howto_rela (abfd, cache_ptr, dst) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| arelent *cache_ptr ATTRIBUTE_UNUSED; |
| Elf64_Internal_Rela *dst ATTRIBUTE_UNUSED; |
| { |
| BFD_ASSERT (0); |
| } |
| |
| /* Since each entry in an SHT_REL or SHT_RELA section can represent up |
| to three relocs, we must tell the user to allocate more space. */ |
| |
| static long |
| mips_elf64_get_reloc_upper_bound (abfd, sec) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| asection *sec; |
| { |
| return (sec->reloc_count * 3 + 1) * sizeof (arelent *); |
| } |
| |
| /* Read the relocations from one reloc section. */ |
| |
| static boolean |
| mips_elf64_slurp_one_reloc_table (abfd, asect, symbols, rel_hdr) |
| bfd *abfd; |
| asection *asect; |
| asymbol **symbols; |
| const Elf_Internal_Shdr *rel_hdr; |
| { |
| PTR allocated = NULL; |
| bfd_byte *native_relocs; |
| arelent *relents; |
| arelent *relent; |
| bfd_vma count; |
| bfd_vma i; |
| int entsize; |
| reloc_howto_type *howto_table; |
| |
| allocated = (PTR) bfd_malloc (rel_hdr->sh_size); |
| if (allocated == NULL) |
| return false; |
| |
| if (bfd_seek (abfd, rel_hdr->sh_offset, SEEK_SET) != 0 |
| || (bfd_bread (allocated, rel_hdr->sh_size, abfd) != rel_hdr->sh_size)) |
| goto error_return; |
| |
| native_relocs = (bfd_byte *) allocated; |
| |
| relents = asect->relocation + asect->reloc_count; |
| |
| entsize = rel_hdr->sh_entsize; |
| BFD_ASSERT (entsize == sizeof (Elf64_Mips_External_Rel) |
| || entsize == sizeof (Elf64_Mips_External_Rela)); |
| |
| count = rel_hdr->sh_size / entsize; |
| |
| if (entsize == sizeof (Elf64_Mips_External_Rel)) |
| howto_table = mips_elf64_howto_table_rel; |
| else |
| howto_table = mips_elf64_howto_table_rela; |
| |
| relent = relents; |
| for (i = 0; i < count; i++, native_relocs += entsize) |
| { |
| Elf64_Mips_Internal_Rela rela; |
| boolean used_sym, used_ssym; |
| int ir; |
| |
| if (entsize == sizeof (Elf64_Mips_External_Rela)) |
| mips_elf64_swap_reloca_in (abfd, |
| (Elf64_Mips_External_Rela *) native_relocs, |
| &rela); |
| else |
| { |
| Elf64_Mips_Internal_Rel rel; |
| |
| mips_elf64_swap_reloc_in (abfd, |
| (Elf64_Mips_External_Rel *) native_relocs, |
| &rel); |
| rela.r_offset = rel.r_offset; |
| rela.r_sym = rel.r_sym; |
| rela.r_ssym = rel.r_ssym; |
| rela.r_type3 = rel.r_type3; |
| rela.r_type2 = rel.r_type2; |
| rela.r_type = rel.r_type; |
| rela.r_addend = 0; |
| } |
| |
| /* Each entry represents up to three actual relocations. */ |
| |
| used_sym = false; |
| used_ssym = false; |
| for (ir = 0; ir < 3; ir++) |
| { |
| enum elf_mips_reloc_type type; |
| |
| switch (ir) |
| { |
| default: |
| abort (); |
| case 0: |
| type = (enum elf_mips_reloc_type) rela.r_type; |
| break; |
| case 1: |
| type = (enum elf_mips_reloc_type) rela.r_type2; |
| break; |
| case 2: |
| type = (enum elf_mips_reloc_type) rela.r_type3; |
| break; |
| } |
| |
| if (type == R_MIPS_NONE) |
| { |
| /* There are no more relocations in this entry. If this |
| is the first entry, we need to generate a dummy |
| relocation so that the generic linker knows that |
| there has been a break in the sequence of relocations |
| applying to a particular address. */ |
| if (ir == 0) |
| { |
| relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; |
| if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0) |
| relent->address = rela.r_offset; |
| else |
| relent->address = rela.r_offset - asect->vma; |
| relent->addend = 0; |
| relent->howto = &howto_table[(int) R_MIPS_NONE]; |
| ++relent; |
| } |
| break; |
| } |
| |
| /* Some types require symbols, whereas some do not. */ |
| switch (type) |
| { |
| case R_MIPS_NONE: |
| case R_MIPS_LITERAL: |
| case R_MIPS_INSERT_A: |
| case R_MIPS_INSERT_B: |
| case R_MIPS_DELETE: |
| relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; |
| break; |
| |
| default: |
| if (! used_sym) |
| { |
| if (rela.r_sym == 0) |
| relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; |
| else |
| { |
| asymbol **ps, *s; |
| |
| ps = symbols + rela.r_sym - 1; |
| s = *ps; |
| if ((s->flags & BSF_SECTION_SYM) == 0) |
| relent->sym_ptr_ptr = ps; |
| else |
| relent->sym_ptr_ptr = s->section->symbol_ptr_ptr; |
| } |
| |
| used_sym = true; |
| } |
| else if (! used_ssym) |
| { |
| switch (rela.r_ssym) |
| { |
| case RSS_UNDEF: |
| relent->sym_ptr_ptr = |
| bfd_abs_section_ptr->symbol_ptr_ptr; |
| break; |
| |
| case RSS_GP: |
| case RSS_GP0: |
| case RSS_LOC: |
| /* FIXME: I think these need to be handled using |
| special howto structures. */ |
| BFD_ASSERT (0); |
| break; |
| |
| default: |
| BFD_ASSERT (0); |
| break; |
| } |
| |
| used_ssym = true; |
| } |
| else |
| relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; |
| |
| break; |
| } |
| |
| /* The address of an ELF reloc is section relative for an |
| object file, and absolute for an executable file or |
| shared library. The address of a BFD reloc is always |
| section relative. */ |
| if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0) |
| relent->address = rela.r_offset; |
| else |
| relent->address = rela.r_offset - asect->vma; |
| |
| relent->addend = rela.r_addend; |
| |
| relent->howto = &howto_table[(int) type]; |
| |
| ++relent; |
| } |
| } |
| |
| asect->reloc_count += relent - relents; |
| |
| if (allocated != NULL) |
| free (allocated); |
| |
| return true; |
| |
| error_return: |
| if (allocated != NULL) |
| free (allocated); |
| return false; |
| } |
| |
| /* Read the relocations. On Irix 6, there can be two reloc sections |
| associated with a single data section. */ |
| |
| static boolean |
| mips_elf64_slurp_reloc_table (abfd, asect, symbols, dynamic) |
| bfd *abfd; |
| asection *asect; |
| asymbol **symbols; |
| boolean dynamic; |
| { |
| bfd_size_type amt; |
| struct bfd_elf_section_data * const d = elf_section_data (asect); |
| |
| if (dynamic) |
| { |
| bfd_set_error (bfd_error_invalid_operation); |
| return false; |
| } |
| |
| if (asect->relocation != NULL |
| || (asect->flags & SEC_RELOC) == 0 |
| || asect->reloc_count == 0) |
| return true; |
| |
| /* Allocate space for 3 arelent structures for each Rel structure. */ |
| amt = asect->reloc_count; |
| amt *= 3 * sizeof (arelent); |
| asect->relocation = (arelent *) bfd_alloc (abfd, amt); |
| if (asect->relocation == NULL) |
| return false; |
| |
| /* The slurp_one_reloc_table routine increments reloc_count. */ |
| asect->reloc_count = 0; |
| |
| if (! mips_elf64_slurp_one_reloc_table (abfd, asect, symbols, &d->rel_hdr)) |
| return false; |
| if (d->rel_hdr2 != NULL) |
| { |
| if (! mips_elf64_slurp_one_reloc_table (abfd, asect, symbols, |
| d->rel_hdr2)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Write out the relocations. */ |
| |
| static void |
| mips_elf64_write_relocs (abfd, sec, data) |
| bfd *abfd; |
| asection *sec; |
| PTR data; |
| { |
| boolean *failedp = (boolean *) data; |
| int count; |
| Elf_Internal_Shdr *rel_hdr; |
| unsigned int idx; |
| |
| /* If we have already failed, don't do anything. */ |
| if (*failedp) |
| return; |
| |
| if ((sec->flags & SEC_RELOC) == 0) |
| return; |
| |
| /* The linker backend writes the relocs out itself, and sets the |
| reloc_count field to zero to inhibit writing them here. Also, |
| sometimes the SEC_RELOC flag gets set even when there aren't any |
| relocs. */ |
| if (sec->reloc_count == 0) |
| return; |
| |
| /* We can combine up to three relocs that refer to the same address |
| if the latter relocs have no associated symbol. */ |
| count = 0; |
| for (idx = 0; idx < sec->reloc_count; idx++) |
| { |
| bfd_vma addr; |
| unsigned int i; |
| |
| ++count; |
| |
| addr = sec->orelocation[idx]->address; |
| for (i = 0; i < 2; i++) |
| { |
| arelent *r; |
| |
| if (idx + 1 >= sec->reloc_count) |
| break; |
| r = sec->orelocation[idx + 1]; |
| if (r->address != addr |
| || ! bfd_is_abs_section ((*r->sym_ptr_ptr)->section) |
| || (*r->sym_ptr_ptr)->value != 0) |
| break; |
| |
| /* We can merge the reloc at IDX + 1 with the reloc at IDX. */ |
| |
| ++idx; |
| } |
| } |
| |
| rel_hdr = &elf_section_data (sec)->rel_hdr; |
| |
| /* Do the actual relocation. */ |
| |
| if (rel_hdr->sh_entsize == sizeof(Elf64_Mips_External_Rel)) |
| mips_elf64_write_rel (abfd, sec, rel_hdr, &count, data); |
| else if (rel_hdr->sh_entsize == sizeof(Elf64_Mips_External_Rela)) |
| mips_elf64_write_rela (abfd, sec, rel_hdr, &count, data); |
| else |
| BFD_ASSERT (0); |
| } |
| |
| static void |
| mips_elf64_write_rel (abfd, sec, rel_hdr, count, data) |
| bfd *abfd; |
| asection *sec; |
| Elf_Internal_Shdr *rel_hdr; |
| int *count; |
| PTR data; |
| { |
| boolean *failedp = (boolean *) data; |
| Elf64_Mips_External_Rel *ext_rel; |
| unsigned int idx; |
| asymbol *last_sym = 0; |
| int last_sym_idx = 0; |
| |
| rel_hdr->sh_size = (bfd_vma)(rel_hdr->sh_entsize * *count); |
| rel_hdr->contents = (PTR) bfd_alloc (abfd, rel_hdr->sh_size); |
| if (rel_hdr->contents == NULL) |
| { |
| *failedp = true; |
| return; |
| } |
| |
| ext_rel = (Elf64_Mips_External_Rel *) rel_hdr->contents; |
| for (idx = 0; idx < sec->reloc_count; idx++, ext_rel++) |
| { |
| arelent *ptr; |
| Elf64_Mips_Internal_Rel int_rel; |
| asymbol *sym; |
| int n; |
| unsigned int i; |
| |
| ptr = sec->orelocation[idx]; |
| |
| /* The address of an ELF reloc is section relative for an object |
| file, and absolute for an executable file or shared library. |
| The address of a BFD reloc is always section relative. */ |
| if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0) |
| int_rel.r_offset = ptr->address; |
| else |
| int_rel.r_offset = ptr->address + sec->vma; |
| |
| sym = *ptr->sym_ptr_ptr; |
| if (sym == last_sym) |
| n = last_sym_idx; |
| else |
| { |
| last_sym = sym; |
| n = _bfd_elf_symbol_from_bfd_symbol (abfd, &sym); |
| if (n < 0) |
| { |
| *failedp = true; |
| return; |
| } |
| last_sym_idx = n; |
| } |
| |
| int_rel.r_sym = n; |
| int_rel.r_ssym = RSS_UNDEF; |
| |
| if ((*ptr->sym_ptr_ptr)->the_bfd->xvec != abfd->xvec |
| && ! _bfd_elf_validate_reloc (abfd, ptr)) |
| { |
| *failedp = true; |
| return; |
| } |
| |
| int_rel.r_type = ptr->howto->type; |
| int_rel.r_type2 = (int) R_MIPS_NONE; |
| int_rel.r_type3 = (int) R_MIPS_NONE; |
| |
| for (i = 0; i < 2; i++) |
| { |
| arelent *r; |
| |
| if (idx + 1 >= sec->reloc_count) |
| break; |
| r = sec->orelocation[idx + 1]; |
| if (r->address != ptr->address |
| || ! bfd_is_abs_section ((*r->sym_ptr_ptr)->section) |
| || (*r->sym_ptr_ptr)->value != 0) |
| break; |
| |
| /* We can merge the reloc at IDX + 1 with the reloc at IDX. */ |
| |
| if (i == 0) |
| int_rel.r_type2 = r->howto->type; |
| else |
| int_rel.r_type3 = r->howto->type; |
| |
| ++idx; |
| } |
| |
| mips_elf64_swap_reloc_out (abfd, &int_rel, ext_rel); |
| } |
| |
| BFD_ASSERT (ext_rel - (Elf64_Mips_External_Rel *) rel_hdr->contents |
| == *count); |
| } |
| |
| static void |
| mips_elf64_write_rela (abfd, sec, rela_hdr, count, data) |
| bfd *abfd; |
| asection *sec; |
| Elf_Internal_Shdr *rela_hdr; |
| int *count; |
| PTR data; |
| { |
| boolean *failedp = (boolean *) data; |
| Elf64_Mips_External_Rela *ext_rela; |
| unsigned int idx; |
| asymbol *last_sym = 0; |
| int last_sym_idx = 0; |
| |
| rela_hdr->sh_size = (bfd_vma)(rela_hdr->sh_entsize * *count); |
| rela_hdr->contents = (PTR) bfd_alloc (abfd, rela_hdr->sh_size); |
| if (rela_hdr->contents == NULL) |
| { |
| *failedp = true; |
| return; |
| } |
| |
| ext_rela = (Elf64_Mips_External_Rela *) rela_hdr->contents; |
| for (idx = 0; idx < sec->reloc_count; idx++, ext_rela++) |
| { |
| arelent *ptr; |
| Elf64_Mips_Internal_Rela int_rela; |
| asymbol *sym; |
| int n; |
| unsigned int i; |
| |
| ptr = sec->orelocation[idx]; |
| |
| /* The address of an ELF reloc is section relative for an object |
| file, and absolute for an executable file or shared library. |
| The address of a BFD reloc is always section relative. */ |
| if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0) |
| int_rela.r_offset = ptr->address; |
| else |
| int_rela.r_offset = ptr->address + sec->vma; |
| |
| sym = *ptr->sym_ptr_ptr; |
| if (sym == last_sym) |
| n = last_sym_idx; |
| else |
| { |
| last_sym = sym; |
| n = _bfd_elf_symbol_from_bfd_symbol (abfd, &sym); |
| if (n < 0) |
| { |
| *failedp = true; |
| return; |
| } |
| last_sym_idx = n; |
| } |
| |
| int_rela.r_sym = n; |
| int_rela.r_addend = ptr->addend; |
| int_rela.r_ssym = RSS_UNDEF; |
| |
| if ((*ptr->sym_ptr_ptr)->the_bfd->xvec != abfd->xvec |
| && ! _bfd_elf_validate_reloc (abfd, ptr)) |
| { |
| *failedp = true; |
| return; |
| } |
| |
| int_rela.r_type = ptr->howto->type; |
| int_rela.r_type2 = (int) R_MIPS_NONE; |
| int_rela.r_type3 = (int) R_MIPS_NONE; |
| |
| for (i = 0; i < 2; i++) |
| { |
| arelent *r; |
| |
| if (idx + 1 >= sec->reloc_count) |
| break; |
| r = sec->orelocation[idx + 1]; |
| if (r->address != ptr->address |
| || ! bfd_is_abs_section ((*r->sym_ptr_ptr)->section) |
| || (*r->sym_ptr_ptr)->value != 0) |
| break; |
| |
| /* We can merge the reloc at IDX + 1 with the reloc at IDX. */ |
| |
| if (i == 0) |
| int_rela.r_type2 = r->howto->type; |
| else |
| int_rela.r_type3 = r->howto->type; |
| |
| ++idx; |
| } |
| |
| mips_elf64_swap_reloca_out (abfd, &int_rela, ext_rela); |
| } |
| |
| BFD_ASSERT (ext_rela - (Elf64_Mips_External_Rela *) rela_hdr->contents |
| == *count); |
| } |
| |
| /* This structure is used to hold .got information when linking. It |
| is stored in the tdata field of the bfd_elf_section_data structure. */ |
| |
| struct mips_elf64_got_info |
| { |
| /* The global symbol in the GOT with the lowest index in the dynamic |
| symbol table. */ |
| struct elf_link_hash_entry *global_gotsym; |
| /* The number of global .got entries. */ |
| unsigned int global_gotno; |
| /* The number of local .got entries. */ |
| unsigned int local_gotno; |
| /* The number of local .got entries we have used. */ |
| unsigned int assigned_gotno; |
| }; |
| |
| /* The MIPS ELF64 linker needs additional information for each symbol in |
| the global hash table. */ |
| |
| struct mips_elf64_link_hash_entry |
| { |
| struct elf_link_hash_entry root; |
| |
| /* External symbol information. */ |
| EXTR esym; |
| |
| /* Number of R_MIPS_32, R_MIPS_REL32, or R_MIPS_64 relocs against |
| this symbol. */ |
| unsigned int possibly_dynamic_relocs; |
| |
| /* If the R_MIPS_32, R_MIPS_REL32, or R_MIPS_64 reloc is against |
| a readonly section. */ |
| boolean readonly_reloc; |
| |
| /* The index of the first dynamic relocation (in the .rel.dyn |
| section) against this symbol. */ |
| unsigned int min_dyn_reloc_index; |
| |
| /* We must not create a stub for a symbol that has relocations |
| related to taking the function's address, i.e. any but |
| R_MIPS_CALL*16 ones -- see "MIPS ABI Supplement, 3rd Edition", |
| p. 4-20. */ |
| boolean no_fn_stub; |
| |
| /* If there is a stub that 32 bit functions should use to call this |
| 16 bit function, this points to the section containing the stub. */ |
| asection *fn_stub; |
| |
| /* Whether we need the fn_stub; this is set if this symbol appears |
| in any relocs other than a 16 bit call. */ |
| boolean need_fn_stub; |
| |
| /* If there is a stub that 16 bit functions should use to call this |
| 32 bit function, this points to the section containing the stub. */ |
| asection *call_stub; |
| |
| /* This is like the call_stub field, but it is used if the function |
| being called returns a floating point value. */ |
| asection *call_fp_stub; |
| }; |
| |
| /* The mips16 compiler uses a couple of special sections to handle |
| floating point arguments. |
| |
| Section names that look like .mips16.fn.FNNAME contain stubs that |
| copy floating point arguments from the fp regs to the gp regs and |
| then jump to FNNAME. If any 32 bit function calls FNNAME, the |
| call should be redirected to the stub instead. If no 32 bit |
| function calls FNNAME, the stub should be discarded. We need to |
| consider any reference to the function, not just a call, because |
| if the address of the function is taken we will need the stub, |
| since the address might be passed to a 32 bit function. |
| |
| Section names that look like .mips16.call.FNNAME contain stubs |
| that copy floating point arguments from the gp regs to the fp |
| regs and then jump to FNNAME. If FNNAME is a 32 bit function, |
| then any 16 bit function that calls FNNAME should be redirected |
| to the stub instead. If FNNAME is not a 32 bit function, the |
| stub should be discarded. |
| |
| .mips16.call.fp.FNNAME sections are similar, but contain stubs |
| which call FNNAME and then copy the return value from the fp regs |
| to the gp regs. These stubs store the return value in $18 while |
| calling FNNAME; any function which might call one of these stubs |
| must arrange to save $18 around the call. (This case is not |
| needed for 32 bit functions that call 16 bit functions, because |
| 16 bit functions always return floating point values in both |
| $f0/$f1 and $2/$3.) |
| |
| Note that in all cases FNNAME might be defined statically. |
| Therefore, FNNAME is not used literally. Instead, the relocation |
| information will indicate which symbol the section is for. |
| |
| We record any stubs that we find in the symbol table. */ |
| |
| #define FN_STUB ".mips16.fn." |
| #define CALL_STUB ".mips16.call." |
| #define CALL_FP_STUB ".mips16.call.fp." |
| |
| /* MIPS ELF64 linker hash table. */ |
| |
| struct mips_elf64_link_hash_table |
| { |
| struct elf_link_hash_table root; |
| /* This is set if we see any mips16 stub sections. */ |
| boolean mips16_stubs_seen; |
| }; |
| |
| /* Look up an entry in a MIPS ELF64 linker hash table. */ |
| |
| #define mips_elf64_link_hash_lookup(table, string, create, copy, follow) \ |
| ((struct mips_elf64_link_hash_entry *) \ |
| elf_link_hash_lookup (&(table)->root, (string), (create), \ |
| (copy), (follow))) |
| |
| /* Traverse a MIPS ELF linker hash table. */ |
| |
| #define mips_elf64_link_hash_traverse(table, func, info) \ |
| (elf_link_hash_traverse \ |
| (&(table)->root, \ |
| (boolean (*) PARAMS ((struct elf_link_hash_entry *, PTR))) (func), \ |
| (info))) |
| |
| /* Get the MIPS ELF64 linker hash table from a link_info structure. */ |
| |
| #define mips_elf64_hash_table(p) \ |
| ((struct mips_elf64_link_hash_table *) ((p)->hash)) |
| |
| /* Create an entry in a MIPS ELF64 linker hash table. */ |
| |
| static struct bfd_hash_entry * |
| mips_elf64_link_hash_newfunc (entry, table, string) |
| struct bfd_hash_entry *entry; |
| struct bfd_hash_table *table; |
| const char *string; |
| { |
| struct mips_elf64_link_hash_entry *ret = |
| (struct mips_elf64_link_hash_entry *) entry; |
| |
| /* Allocate the structure if it has not already been allocated by a |
| subclass. */ |
| if (ret == (struct mips_elf64_link_hash_entry *) NULL) |
| ret = ((struct mips_elf64_link_hash_entry *) |
| bfd_hash_allocate (table, |
| sizeof (struct mips_elf64_link_hash_entry))); |
| if (ret == (struct mips_elf64_link_hash_entry *) NULL) |
| return (struct bfd_hash_entry *) ret; |
| |
| /* Call the allocation method of the superclass. */ |
| ret = ((struct mips_elf64_link_hash_entry *) |
| _bfd_elf_link_hash_newfunc ((struct bfd_hash_entry *) ret, |
| table, string)); |
| if (ret != (struct mips_elf64_link_hash_entry *) NULL) |
| { |
| /* Set local fields. */ |
| memset (&ret->esym, 0, sizeof (EXTR)); |
| /* We use -2 as a marker to indicate that the information has |
| not been set. -1 means there is no associated ifd. */ |
| ret->esym.ifd = -2; |
| ret->possibly_dynamic_relocs = 0; |
| ret->readonly_reloc = false; |
| ret->min_dyn_reloc_index = 0; |
| ret->no_fn_stub = false; |
| ret->fn_stub = NULL; |
| ret->need_fn_stub = false; |
| ret->call_stub = NULL; |
| ret->call_fp_stub = NULL; |
| } |
| |
| return (struct bfd_hash_entry *) ret; |
| } |
| |
| /* Create a MIPS ELF64 linker hash table. */ |
| |
| struct bfd_link_hash_table * |
| mips_elf64_link_hash_table_create (abfd) |
| bfd *abfd; |
| { |
| struct mips_elf64_link_hash_table *ret; |
| |
| ret = ((struct mips_elf64_link_hash_table *) |
| bfd_alloc (abfd, sizeof (struct mips_elf64_link_hash_table))); |
| if (ret == (struct mips_elf64_link_hash_table *) NULL) |
| return NULL; |
| |
| if (! _bfd_elf_link_hash_table_init (&ret->root, abfd, |
| mips_elf64_link_hash_newfunc)) |
| { |
| bfd_release (abfd, ret); |
| return NULL; |
| } |
| |
| ret->mips16_stubs_seen = false; |
| |
| return &ret->root.root; |
| } |
| |
| /* Returns the offset for the entry at the INDEXth position |
| in the GOT. */ |
| |
| static bfd_vma |
| mips_elf64_got_offset_from_index (dynobj, output_bfd, index) |
| bfd *dynobj; |
| bfd *output_bfd; |
| bfd_vma index; |
| { |
| asection *sgot; |
| bfd_vma gp; |
| |
| sgot = bfd_get_section_by_name (dynobj, ".got"); |
| gp = _bfd_get_gp_value (output_bfd); |
| return (sgot->output_section->vma + sgot->output_offset + index - |
| gp); |
| } |
| |
| /* Returns the GOT information associated with the link indicated by |
| INFO. If SGOTP is non-NULL, it is filled in with the GOT |
| section. */ |
| |
| static struct mips_elf64_got_info * |
| _mips_elf64_got_info (abfd, sgotp) |
| bfd *abfd; |
| asection **sgotp; |
| { |
| asection *sgot; |
| struct mips_elf64_got_info *g; |
| |
| sgot = bfd_get_section_by_name (abfd, ".got"); |
| BFD_ASSERT (sgot != NULL); |
| BFD_ASSERT (elf_section_data (sgot) != NULL); |
| g = (struct mips_elf64_got_info *) elf_section_data (sgot)->tdata; |
| BFD_ASSERT (g != NULL); |
| |
| if (sgotp) |
| *sgotp = sgot; |
| return g; |
| } |
| |
| /* Sign-extend VALUE, which has the indicated number of BITS. */ |
| |
| static bfd_vma |
| mips_elf64_sign_extend (value, bits) |
| bfd_vma value; |
| int bits; |
| { |
| if (value & ((bfd_vma)1 << (bits - 1))) |
| /* VALUE is negative. */ |
| value |= ((bfd_vma) - 1) << bits; |
| |
| return value; |
| } |
| |
| /* Return non-zero if the indicated VALUE has overflowed the maximum |
| range expressable by a signed number with the indicated number of |
| BITS. */ |
| |
| static boolean |
| mips_elf64_overflow_p (value, bits) |
| bfd_vma value; |
| int bits; |
| { |
| bfd_signed_vma svalue = (bfd_signed_vma) value; |
| |
| if (svalue > (1 << (bits - 1)) - 1) |
| /* The value is too big. */ |
| return true; |
| else if (svalue < -(1 << (bits - 1))) |
| /* The value is too small. */ |
| return true; |
| |
| /* All is well. */ |
| return false; |
| } |
| |
| /* Returns the GOT index for the global symbol indicated by H. */ |
| |
| static bfd_vma |
| mips_elf64_global_got_index (abfd, h) |
| bfd *abfd; |
| struct elf_link_hash_entry *h; |
| { |
| bfd_vma index; |
| asection *sgot; |
| struct mips_elf64_got_info *g; |
| |
| g = _mips_elf64_got_info (abfd, &sgot); |
| |
| /* Once we determine the global GOT entry with the lowest dynamic |
| symbol table index, we must put all dynamic symbols with greater |
| indices into the GOT. That makes it easy to calculate the GOT |
| offset. */ |
| BFD_ASSERT (h->dynindx >= g->global_gotsym->dynindx); |
| index = ((h->dynindx - g->global_gotsym->dynindx + g->local_gotno) |
| * (get_elf_backend_data (abfd)->s->arch_size / 8)); |
| BFD_ASSERT (index < sgot->_raw_size); |
| |
| return index; |
| } |
| |
| struct mips_elf64_hash_sort_data |
| { |
| /* The symbol in the global GOT with the lowest dynamic symbol table |
| index. */ |
| struct elf_link_hash_entry *low; |
| /* The least dynamic symbol table index corresponding to a symbol |
| with a GOT entry. */ |
| long min_got_dynindx; |
| /* The greatest dynamic symbol table index not corresponding to a |
| symbol without a GOT entry. */ |
| long max_non_got_dynindx; |
| }; |
| |
| /* If H needs a GOT entry, assign it the highest available dynamic |
| index. Otherwise, assign it the lowest available dynamic |
| index. */ |
| |
| static boolean |
| mips_elf64_sort_hash_table_f (h, data) |
| struct mips_elf64_link_hash_entry *h; |
| PTR data; |
| { |
| struct mips_elf64_hash_sort_data *hsd |
| = (struct mips_elf64_hash_sort_data *) data; |
| |
| /* Symbols without dynamic symbol table entries aren't interesting |
| at all. */ |
| if (h->root.dynindx == -1) |
| return true; |
| |
| if (h->root.got.offset != 1) |
| h->root.dynindx = hsd->max_non_got_dynindx++; |
| else |
| { |
| h->root.dynindx = --hsd->min_got_dynindx; |
| hsd->low = (struct elf_link_hash_entry *) h; |
| } |
| |
| return true; |
| } |
| |
| /* Sort the dynamic symbol table so that symbols that need GOT entries |
| appear towards the end. This reduces the amount of GOT space |
| required. MAX_LOCAL is used to set the number of local symbols |
| known to be in the dynamic symbol table. During |
| mips_elf64_size_dynamic_sections, this value is 1. Afterward, the |
| section symbols are added and the count is higher. */ |
| |
| static boolean |
| mips_elf64_sort_hash_table (info, max_local) |
| struct bfd_link_info *info; |
| unsigned long max_local; |
| { |
| struct mips_elf64_hash_sort_data hsd; |
| struct mips_elf64_got_info *g; |
| bfd *dynobj; |
| |
| dynobj = elf_hash_table (info)->dynobj; |
| |
| hsd.low = NULL; |
| hsd.min_got_dynindx = elf_hash_table (info)->dynsymcount; |
| hsd.max_non_got_dynindx = max_local; |
| mips_elf64_link_hash_traverse (((struct mips_elf64_link_hash_table *) |
| elf_hash_table (info)), |
| mips_elf64_sort_hash_table_f, |
| &hsd); |
| |
| /* There shoud have been enough room in the symbol table to |
| accomodate both the GOT and non-GOT symbols. */ |
| BFD_ASSERT (hsd.max_non_got_dynindx <= hsd.min_got_dynindx); |
| |
| /* Now we know which dynamic symbol has the lowest dynamic symbol |
| table index in the GOT. */ |
| g = _mips_elf64_got_info (dynobj, NULL); |
| g->global_gotsym = hsd.low; |
| |
| return true; |
| } |
| |
| #if 0 |
| /* Swap in an MSYM entry. */ |
| |
| static void |
| mips_elf64_swap_msym_in (abfd, ex, in) |
| bfd *abfd; |
| const Elf32_External_Msym *ex; |
| Elf32_Internal_Msym *in; |
| { |
| in->ms_hash_value = H_GET_32 (abfd, ex->ms_hash_value); |
| in->ms_info = H_GET_32 (abfd, ex->ms_info); |
| } |
| #endif |
| /* Swap out an MSYM entry. */ |
| |
| static void |
| mips_elf64_swap_msym_out (abfd, in, ex) |
| bfd *abfd; |
| const Elf32_Internal_Msym *in; |
| Elf32_External_Msym *ex; |
| { |
| H_PUT_32 (abfd, in->ms_hash_value, ex->ms_hash_value); |
| H_PUT_32 (abfd, in->ms_info, ex->ms_info); |
| } |
| |
| /* Create a local GOT entry for VALUE. Return the index of the entry, |
| or -1 if it could not be created. */ |
| |
| static bfd_vma |
| mips_elf64_create_local_got_entry (abfd, g, sgot, value) |
| bfd *abfd; |
| struct mips_elf64_got_info *g; |
| asection *sgot; |
| bfd_vma value; |
| { |
| CONST bfd_vma got_size = get_elf_backend_data (abfd)->s->arch_size / 8; |
| |
| if (g->assigned_gotno >= g->local_gotno) |
| { |
| /* We didn't allocate enough space in the GOT. */ |
| (*_bfd_error_handler) |
| (_("not enough GOT space for local GOT entries")); |
| bfd_set_error (bfd_error_bad_value); |
| return (bfd_vma) -1; |
| } |
| |
| bfd_put_64 (abfd, value, (sgot->contents + got_size * g->assigned_gotno)); |
| return got_size * g->assigned_gotno++; |
| } |
| |
| /* Returns the GOT offset at which the indicated address can be found. |
| If there is not yet a GOT entry for this value, create one. Returns |
| -1 if no satisfactory GOT offset can be found. */ |
| |
| static bfd_vma |
| mips_elf64_local_got_index (abfd, info, value) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| bfd_vma value; |
| { |
| CONST bfd_vma got_size = get_elf_backend_data (abfd)->s->arch_size / 8; |
| asection *sgot; |
| struct mips_elf64_got_info *g; |
| bfd_byte *entry; |
| |
| g = _mips_elf64_got_info (elf_hash_table (info)->dynobj, &sgot); |
| |
| /* Look to see if we already have an appropriate entry. */ |
| for (entry = (sgot->contents + got_size * MIPS_RESERVED_GOTNO); |
| entry != sgot->contents + got_size * g->assigned_gotno; |
| entry += got_size) |
| { |
| bfd_vma address = bfd_get_64 (abfd, entry); |
| if (address == value) |
| return entry - sgot->contents; |
| } |
| |
| return mips_elf64_create_local_got_entry (abfd, g, sgot, value); |
| } |
| |
| /* Find a GOT entry that is within 32KB of the VALUE. These entries |
| are supposed to be placed at small offsets in the GOT, i.e., |
| within 32KB of GP. Return the index into the GOT for this page, |
| and store the offset from this entry to the desired address in |
| OFFSETP, if it is non-NULL. */ |
| |
| static bfd_vma |
| mips_elf64_got_page (abfd, info, value, offsetp) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| bfd_vma value; |
| bfd_vma *offsetp; |
| { |
| CONST bfd_vma got_size = get_elf_backend_data (abfd)->s->arch_size / 8; |
| asection *sgot; |
| struct mips_elf64_got_info *g; |
| bfd_byte *entry; |
| bfd_byte *last_entry; |
| bfd_vma index = 0; |
| bfd_vma address; |
| |
| g = _mips_elf64_got_info (elf_hash_table (info)->dynobj, &sgot); |
| |
| /* Look to see if we aleady have an appropriate entry. */ |
| last_entry = sgot->contents + got_size * g->assigned_gotno; |
| for (entry = (sgot->contents + got_size * MIPS_RESERVED_GOTNO); |
| entry != last_entry; |
| entry += got_size) |
| { |
| address = bfd_get_64 (abfd, entry); |
| |
| if (!mips_elf64_overflow_p (value - address, 16)) |
| { |
| /* This entry will serve as the page pointer. We can add a |
| 16-bit number to it to get the actual address. */ |
| index = entry - sgot->contents; |
| break; |
| } |
| } |
| |
| /* If we didn't have an appropriate entry, we create one now. */ |
| if (entry == last_entry) |
| index = mips_elf64_create_local_got_entry (abfd, g, sgot, value); |
| |
| if (offsetp) |
| { |
| address = bfd_get_64 (abfd, entry); |
| *offsetp = value - address; |
| } |
| |
| return index; |
| } |
| |
| /* Find a GOT entry whose higher-order 16 bits are the same as those |
| for value. Return the index into the GOT for this entry. */ |
| |
| static bfd_vma |
| mips_elf64_got16_entry (abfd, info, value, external) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| bfd_vma value; |
| boolean external; |
| { |
| CONST bfd_vma got_size = get_elf_backend_data (abfd)->s->arch_size / 8; |
| asection *sgot; |
| struct mips_elf64_got_info *g; |
| bfd_byte *entry; |
| bfd_byte *last_entry; |
| bfd_vma index = 0; |
| bfd_vma address; |
| |
| if (! external) |
| { |
| /* Although the ABI says that it is "the high-order 16 bits" that we |
| want, it is really the %high value. The complete value is |
| calculated with a `addiu' of a LO16 relocation, just as with a |
| HI16/LO16 pair. */ |
| value = mips_elf64_high (value) << 16; |
| } |
| |
| g = _mips_elf64_got_info (elf_hash_table (info)->dynobj, &sgot); |
| |
| /* Look to see if we already have an appropriate entry. */ |
| last_entry = sgot->contents + got_size * g->assigned_gotno; |
| for (entry = (sgot->contents + got_size * MIPS_RESERVED_GOTNO); |
| entry != last_entry; |
| entry += got_size) |
| { |
| address = bfd_get_64 (abfd, entry); |
| if (address == value) |
| { |
| /* This entry has the right high-order 16 bits, and the low-order |
| 16 bits are set to zero. */ |
| index = entry - sgot->contents; |
| break; |
| } |
| } |
| |
| /* If we didn't have an appropriate entry, we create one now. */ |
| if (entry == last_entry) |
| index = mips_elf64_create_local_got_entry (abfd, g, sgot, value); |
| |
| return index; |
| } |
| |
| /* Return whether a relocation is against a local symbol. */ |
| |
| static boolean |
| mips_elf64_local_relocation_p (input_bfd, relocation, local_sections, |
| check_forced) |
| bfd *input_bfd; |
| const Elf_Internal_Rela *relocation; |
| asection **local_sections; |
| boolean check_forced; |
| { |
| unsigned long r_symndx; |
| Elf_Internal_Shdr *symtab_hdr; |
| struct mips_elf64_link_hash_entry* h; |
| size_t extsymoff; |
| |
| r_symndx = ELF64_R_SYM (relocation->r_info); |
| symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; |
| extsymoff = (elf_bad_symtab (input_bfd)) ? 0 : symtab_hdr->sh_info; |
| |
| if (r_symndx < extsymoff) |
| return true; |
| if (elf_bad_symtab (input_bfd) && local_sections[r_symndx] != NULL) |
| return true; |
| |
| if (check_forced) |
| { |
| /* Look up the hash table to check whether the symbol |
| was forced local. */ |
| h = (struct mips_elf64_link_hash_entry *) |
| elf_sym_hashes (input_bfd) [r_symndx - extsymoff]; |
| /* Find the real hash-table entry for this symbol. */ |
| while (h->root.root.type == bfd_link_hash_indirect |
| || h->root.root.type == bfd_link_hash_warning) |
| h = (struct mips_elf64_link_hash_entry *) h->root.root.u.i.link; |
| if ((h->root.elf_link_hash_flags & ELF_LINK_FORCED_LOCAL) != 0) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* Returns the first relocation of type r_type found, beginning with |
| RELOCATION. RELEND is one-past-the-end of the relocation table. */ |
| |
| static const Elf_Internal_Rela * |
| mips_elf64_next_relocation (r_type, relocation, relend) |
| unsigned int r_type; |
| const Elf_Internal_Rela *relocation; |
| const Elf_Internal_Rela *relend; |
| { |
| /* According to the MIPS ELF ABI, the R_MIPS_LO16 relocation must be |
| immediately following. However, for the IRIX6 ABI, the next |
| relocation may be a composed relocation consisting of several |
| relocations for the same address. In that case, the R_MIPS_LO16 |
| relocation may occur as one of these. We permit a similar |
| extension in general, as that is useful for GCC. */ |
| while (relocation < relend) |
| { |
| if (ELF64_MIPS_R_TYPE (relocation->r_info) == r_type) |
| return relocation; |
| |
| ++relocation; |
| } |
| |
| /* We didn't find it. */ |
| bfd_set_error (bfd_error_bad_value); |
| return NULL; |
| } |
| |
| /* Create a rel.dyn relocation for the dynamic linker to resolve. REL |
| is the original relocation, which is now being transformed into a |
| dynamic relocation. The ADDENDP is adjusted if necessary; the |
| caller should store the result in place of the original addend. */ |
| |
| static boolean |
| mips_elf64_create_dynamic_relocation (output_bfd, info, rel, h, sec, |
| symbol, addendp, input_section) |
| bfd *output_bfd; |
| struct bfd_link_info *info; |
| const Elf_Internal_Rela *rel; |
| struct mips_elf64_link_hash_entry *h; |
| asection *sec; |
| bfd_vma symbol; |
| bfd_vma *addendp; |
| asection *input_section; |
| { |
| Elf_Internal_Rel outrel[3]; |
| boolean skip; |
| asection *sreloc; |
| bfd *dynobj; |
| int r_type; |
| |
| r_type = ELF64_MIPS_R_TYPE (rel->r_info); |
| dynobj = elf_hash_table (info)->dynobj; |
| sreloc = bfd_get_section_by_name (dynobj, ".rel.dyn"); |
| BFD_ASSERT (sreloc != NULL); |
| BFD_ASSERT (sreloc->contents != NULL); |
| BFD_ASSERT ((sreloc->reloc_count |
| * get_elf_backend_data (output_bfd)->s->sizeof_rel) |
| < sreloc->_raw_size); |
| |
| skip = false; |
| outrel[0].r_offset = _bfd_elf_section_offset (output_bfd, info, |
| input_section, |
| rel[0].r_offset); |
| /* FIXME: For -2 runtime relocation needs to be skipped, but |
| properly resolved statically and installed. */ |
| BFD_ASSERT (outrel[0].r_offset != (bfd_vma) -2); |
| |
| /* We begin by assuming that the offset for the dynamic relocation |
| is the same as for the original relocation. We'll adjust this |
| later to reflect the correct output offsets. */ |
| if (elf_section_data (input_section)->sec_info_type != ELF_INFO_TYPE_STABS) |
| { |
| outrel[1].r_offset = rel[1].r_offset; |
| outrel[2].r_offset = rel[2].r_offset; |
| } |
| else |
| { |
| /* Except that in a stab section things are more complex. |
| Because we compress stab information, the offset given in the |
| relocation may not be the one we want; we must let the stabs |
| machinery tell us the offset. */ |
| outrel[1].r_offset = outrel[0].r_offset; |
| outrel[2].r_offset = outrel[0].r_offset; |
| /* If we didn't need the relocation at all, this value will be |
| -1. */ |
| if (outrel[0].r_offset == (bfd_vma) -1) |
| skip = true; |
| } |
| |
| /* If we've decided to skip this relocation, just output an empty |
| record. Note that R_MIPS_NONE == 0, so that this call to memset |
| is a way of setting R_TYPE to R_MIPS_NONE. */ |
| if (skip) |
| memset (outrel, 0, sizeof (Elf_Internal_Rel) * 3); |
| else |
| { |
| long indx; |
| bfd_vma section_offset; |
| |
| /* We must now calculate the dynamic symbol table index to use |
| in the relocation. */ |
| if (h != NULL |
| && (! info->symbolic || (h->root.elf_link_hash_flags |
| & ELF_LINK_HASH_DEF_REGULAR) == 0)) |
| { |
| indx = h->root.dynindx; |
| /* h->root.dynindx may be -1 if this symbol was marked to |
| become local. */ |
| if (indx == -1) |
| indx = 0; |
| } |
| else |
| { |
| if (sec != NULL && bfd_is_abs_section (sec)) |
| indx = 0; |
| else if (sec == NULL || sec->owner == NULL) |
| { |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| else |
| { |
| indx = elf_section_data (sec->output_section)->dynindx; |
| if (indx == 0) |
| abort (); |
| } |
| |
| /* Figure out how far the target of the relocation is from |
| the beginning of its section. */ |
| section_offset = symbol - sec->output_section->vma; |
| /* The relocation we're building is section-relative. |
| Therefore, the original addend must be adjusted by the |
| section offset. */ |
| *addendp += section_offset; |
| /* Now, the relocation is just against the section. */ |
| symbol = sec->output_section->vma; |
| } |
| |
| /* If the relocation was previously an absolute relocation and |
| this symbol will not be referred to by the relocation, we must |
| adjust it by the value we give it in the dynamic symbol table. |
| Otherwise leave the job up to the dynamic linker. */ |
| if (!indx && r_type != R_MIPS_REL32) |
| *addendp += symbol; |
| |
| /* The relocation is always an REL32 relocation because we don't |
| know where the shared library will wind up at load-time. */ |
| outrel[0].r_info = ELF64_R_INFO (indx, R_MIPS_REL32); |
| |
| /* Adjust the output offset of the relocation to reference the |
| correct location in the output file. */ |
| outrel[0].r_offset += (input_section->output_section->vma |
| + input_section->output_offset); |
| outrel[1].r_offset += (input_section->output_section->vma |
| + input_section->output_offset); |
| outrel[2].r_offset += (input_section->output_section->vma |
| + input_section->output_offset); |
| } |
| |
| /* Put the relocation back out. */ |
| mips_elf64_be_swap_reloc_out (output_bfd, outrel, |
| (sreloc->contents |
| + sreloc->reloc_count |
| * sizeof (Elf64_Mips_External_Rel))); |
| |
| /* Record the index of the first relocation referencing H. This |
| information is later emitted in the .msym section. */ |
| if (h != NULL |
| && (h->min_dyn_reloc_index == 0 |
| || sreloc->reloc_count < h->min_dyn_reloc_index)) |
| h->min_dyn_reloc_index = sreloc->reloc_count; |
| |
| /* We've now added another relocation. */ |
| ++sreloc->reloc_count; |
| |
| /* Make sure the output section is writable. The dynamic linker |
| will be writing to it. */ |
| elf_section_data (input_section->output_section)->this_hdr.sh_flags |
| |= SHF_WRITE; |
| |
| return true; |
| } |
| |
| /* Calculate the value produced by the RELOCATION (which comes from |
| the INPUT_BFD). The ADDEND is the addend to use for this |
| RELOCATION; RELOCATION->R_ADDEND is ignored. |
| |
| The result of the relocation calculation is stored in VALUEP. |
| REQUIRE_JALXP indicates whether or not the opcode used with this |
| relocation must be JALX. |
| |
| This function returns bfd_reloc_continue if the caller need take no |
| further action regarding this relocation, bfd_reloc_notsupported if |
| something goes dramatically wrong, bfd_reloc_overflow if an |
| overflow occurs, and bfd_reloc_ok to indicate success. */ |
| |
| static bfd_reloc_status_type |
| mips_elf64_calculate_relocation (abfd, input_bfd, input_section, info, |
| relocation, addend, howto, local_syms, |
| local_sections, valuep, namep, require_jalxp) |
| bfd *abfd; |
| bfd *input_bfd; |
| asection *input_section; |
| struct bfd_link_info *info; |
| const Elf_Internal_Rela *relocation; |
| bfd_vma addend; |
| reloc_howto_type *howto; |
| Elf_Internal_Sym *local_syms; |
| asection **local_sections; |
| bfd_vma *valuep; |
| const char **namep; |
| boolean *require_jalxp; |
| { |
| /* The eventual value we will return. */ |
| bfd_vma value; |
| /* The address of the symbol against which the relocation is |
| occurring. */ |
| bfd_vma symbol = 0; |
| /* The final GP value to be used for the relocatable, executable, or |
| shared object file being produced. */ |
| bfd_vma gp = (bfd_vma) - 1; |
| /* The place (section offset or address) of the storage unit being |
| relocated. */ |
| bfd_vma p; |
| /* The value of GP used to create the relocatable object. */ |
| bfd_vma gp0 = (bfd_vma) - 1; |
| /* The offset into the global offset table at which the address of |
| the relocation entry symbol, adjusted by the addend, resides |
| during execution. */ |
| bfd_vma g = (bfd_vma) - 1; |
| /* The section in which the symbol referenced by the relocation is |
| located. */ |
| asection *sec = NULL; |
| struct mips_elf64_link_hash_entry* h = NULL; |
| /* True if the symbol referred to by this relocation is a local |
| symbol. */ |
| boolean local_p; |
| Elf_Internal_Shdr *symtab_hdr; |
| size_t extsymoff; |
| unsigned long r_symndx; |
| int r_type; |
| /* True if overflow occurred during the calculation of the |
| relocation value. */ |
| boolean overflowed_p; |
| /* True if this relocation refers to a MIPS16 function. */ |
| boolean target_is_16_bit_code_p = false; |
| |
| /* Parse the relocation. */ |
| r_symndx = ELF64_R_SYM (relocation->r_info); |
| r_type = ELF64_MIPS_R_TYPE (relocation->r_info); |
| p = (input_section->output_section->vma |
| + input_section->output_offset |
| + relocation->r_offset); |
| |
| /* Assume that there will be no overflow. */ |
| overflowed_p = false; |
| |
| /* Figure out whether or not the symbol is local, and get the offset |
| used in the array of hash table entries. */ |
| symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; |
| local_p = mips_elf64_local_relocation_p (input_bfd, relocation, |
| local_sections, false); |
| if (! elf_bad_symtab (input_bfd)) |
| extsymoff = symtab_hdr->sh_info; |
| else |
| { |
| /* The symbol table does not follow the rule that local symbols |
| must come before globals. */ |
| extsymoff = 0; |
| } |
| |
| /* Figure out the value of the symbol. */ |
| if (local_p) |
| { |
| Elf_Internal_Sym *sym; |
| |
| sym = local_syms + r_symndx; |
| sec = local_sections[r_symndx]; |
| |
| symbol = sec->output_section->vma + sec->output_offset; |
| if (ELF_ST_TYPE (sym->st_info) != STT_SECTION) |
| symbol += sym->st_value; |
| |
| /* MIPS16 text labels should be treated as odd. */ |
| if (sym->st_other == STO_MIPS16) |
| ++symbol; |
| |
| /* Record the name of this symbol, for our caller. */ |
| *namep = bfd_elf_string_from_elf_section (input_bfd, |
| symtab_hdr->sh_link, |
| sym->st_name); |
| if (*namep == '\0') |
| *namep = bfd_section_name (input_bfd, sec); |
| |
| target_is_16_bit_code_p = (sym->st_other == STO_MIPS16); |
| } |
| else |
| { |
| /* For global symbols we look up the symbol in the hash-table. */ |
| h = ((struct mips_elf64_link_hash_entry *) |
| elf_sym_hashes (input_bfd) [r_symndx - extsymoff]); |
| /* Find the real hash-table entry for this symbol. */ |
| while (h->root.root.type == bfd_link_hash_indirect |
| || h->root.root.type == bfd_link_hash_warning) |
| h = (struct mips_elf64_link_hash_entry *) h->root.root.u.i.link; |
| |
| /* Record the name of this symbol, for our caller. */ |
| *namep = h->root.root.root.string; |
| |
| /* If this symbol is defined, calculate its address. */ |
| if ((h->root.root.type == bfd_link_hash_defined |
| || h->root.root.type == bfd_link_hash_defweak) |
| && h->root.root.u.def.section) |
| { |
| sec = h->root.root.u.def.section; |
| if (sec->output_section) |
| symbol = (h->root.root.u.def.value |
| + sec->output_section->vma |
| + sec->output_offset); |
| else |
| symbol = h->root.root.u.def.value; |
| } |
| else if (h->root.root.type == bfd_link_hash_undefweak) |
| /* We allow relocations against undefined weak symbols, giving |
| it the value zero, so that you can undefined weak functions |
| and check to see if they exist by looking at their |
| addresses. */ |
| symbol = 0; |
| else if (info->shared |
| && (!info->symbolic || info->allow_shlib_undefined) |
| && !info->no_undefined |
| && ELF_ST_VISIBILITY (h->root.other) == STV_DEFAULT) |
| symbol = 0; |
| else if (strcmp (h->root.root.root.string, "_DYNAMIC_LINK") == 0 || |
| strcmp (h->root.root.root.string, "_DYNAMIC_LINKING") == 0) |
| { |
| /* If this is a dynamic link, we should have created a |
| _DYNAMIC_LINK symbol or _DYNAMIC_LINKING(for normal mips) symbol |
| in in mips_elf64_create_dynamic_sections. |
| Otherwise, we should define the symbol with a value of 0. |
| FIXME: It should probably get into the symbol table |
| somehow as well. */ |
| BFD_ASSERT (! info->shared); |
| BFD_ASSERT (bfd_get_section_by_name (abfd, ".dynamic") == NULL); |
| symbol = 0; |
| } |
| else |
| { |
| if (! ((*info->callbacks->undefined_symbol) |
| (info, h->root.root.root.string, input_bfd, |
| input_section, relocation->r_offset, |
| (!info->shared || info->no_undefined |
| || ELF_ST_VISIBILITY (h->root.other))))) |
| return bfd_reloc_undefined; |
| symbol = 0; |
| } |
| |
| target_is_16_bit_code_p = (h->root.other == STO_MIPS16); |
| } |
| |
| /* If this is a 64-bit call to a 16-bit function with a stub, we |
| need to redirect the call to the stub, unless we're already *in* |
| a stub. */ |
| if (r_type != R_MIPS16_26 && !info->relocateable |
| && ((h != NULL && h->fn_stub != NULL) |
| || (local_p && elf_tdata (input_bfd)->local_stubs != NULL |
| && elf_tdata (input_bfd)->local_stubs[r_symndx] != NULL)) |
| && !mips_elf64_stub_section_p (input_bfd, input_section)) |
| { |
| /* This is a 64-bit call to a 16-bit function. We should |
| have already noticed that we were going to need the |
| stub. */ |
| if (local_p) |
| sec = elf_tdata (input_bfd)->local_stubs[r_symndx]; |
| else |
| { |
| BFD_ASSERT (h->need_fn_stub); |
| sec = h->fn_stub; |
| } |
| |
| symbol = sec->output_section->vma + sec->output_offset; |
| } |
| /* If this is a 16-bit call to a 64-bit function with a stub, we |
| need to redirect the call to the stub. */ |
| else if (r_type == R_MIPS16_26 && !info->relocateable |
| && h != NULL |
| && (h->call_stub != NULL || h->call_fp_stub != NULL) |
| && !target_is_16_bit_code_p) |
| { |
| /* If both call_stub and call_fp_stub are defined, we can figure |
| out which one to use by seeing which one appears in the input |
| file. */ |
| if (h->call_stub != NULL && h->call_fp_stub != NULL) |
| { |
| asection *o; |
| |
| sec = NULL; |
| for (o = input_bfd->sections; o != NULL; o = o->next) |
| { |
| if (strncmp (bfd_get_section_name (input_bfd, o), |
| CALL_FP_STUB, sizeof CALL_FP_STUB - 1) == 0) |
| { |
| sec = h->call_fp_stub; |
| break; |
| } |
| } |
| if (sec == NULL) |
| sec = h->call_stub; |
| } |
| else if (h->call_stub != NULL) |
| sec = h->call_stub; |
| else |
| sec = h->call_fp_stub; |
| |
| BFD_ASSERT (sec->_raw_size > 0); |
| symbol = sec->output_section->vma + sec->output_offset; |
| } |
| |
| /* Calls from 16-bit code to 32-bit code and vice versa require the |
| special jalx instruction. */ |
| *require_jalxp = (!info->relocateable |
| && ((r_type == R_MIPS16_26) != target_is_16_bit_code_p)); |
| |
| local_p = mips_elf64_local_relocation_p (input_bfd, relocation, |
| local_sections, true); |
| |
| /* If we haven't already determined the GOT offset, or the GP value, |
| and we're going to need it, get it now. */ |
| switch (r_type) |
| { |
| case R_MIPS_CALL16: |
| case R_MIPS_GOT16: |
| case R_MIPS_GOT_DISP: |
| case R_MIPS_GOT_HI16: |
| case R_MIPS_CALL_HI16: |
| case R_MIPS_GOT_LO16: |
| case R_MIPS_CALL_LO16: |
| /* Find the index into the GOT where this value is located. */ |
| if (!local_p) |
| { |
| BFD_ASSERT (addend == 0); |
| g = mips_elf64_global_got_index (elf_hash_table (info)->dynobj, |
| (struct elf_link_hash_entry*) h); |
| if (! elf_hash_table(info)->dynamic_sections_created |
| || (info->shared |
| && (info->symbolic || h->root.dynindx == -1) |
| && (h->root.elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR))) |
| { |
| /* This is a static link or a -Bsymbolic link. The |
| symbol is defined locally, or was forced to be local. |
| We must initialize this entry in the GOT. */ |
| bfd *tmpbfd = elf_hash_table (info)->dynobj; |
| |
| asection *sgot = bfd_get_section_by_name (tmpbfd, ".got"); |
| bfd_put_64 (tmpbfd, symbol + addend, sgot->contents + g); |
| } |
| } |
| else if (r_type == R_MIPS_GOT16 || r_type == R_MIPS_CALL16) |
| /* There's no need to create a local GOT entry here; the |
| calculation for a local GOT16 entry does not involve G. */ |
| break; |
| else |
| { |
| g = mips_elf64_local_got_index (abfd, info, symbol + addend); |
| if (g == (bfd_vma) -1) |
| return false; |
| } |
| |
| /* Convert GOT indices to actual offsets. */ |
| g = mips_elf64_got_offset_from_index (elf_hash_table (info)->dynobj, |
| abfd, g); |
| break; |
| |
| case R_MIPS_HI16: |
| case R_MIPS_LO16: |
| case R_MIPS_GPREL16: |
| case R_MIPS_GPREL32: |
| case R_MIPS_LITERAL: |
| gp0 = _bfd_get_gp_value (input_bfd); |
| gp = _bfd_get_gp_value (abfd); |
| break; |
| |
| default: |
| break; |
| } |
| |
| /* Figure out what kind of relocation is being performed. */ |
| switch (r_type) |
| { |
| case R_MIPS_NONE: |
| return bfd_reloc_continue; |
| |
| case R_MIPS_16: |
| value = symbol + mips_elf64_sign_extend (addend, 16); |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| break; |
| |
| case R_MIPS_32: |
| case R_MIPS_REL32: |
| case R_MIPS_64: |
| if ((info->shared |
| || (elf_hash_table (info)->dynamic_sections_created |
| && h != NULL |
| && ((h->root.elf_link_hash_flags |
| & ELF_LINK_HASH_DEF_DYNAMIC) != 0) |
| && ((h->root.elf_link_hash_flags |
| & ELF_LINK_HASH_DEF_REGULAR) == 0))) |
| && r_symndx != 0 |
| && (input_section->flags & SEC_ALLOC) != 0) |
| { |
| /* If we're creating a shared library, or this relocation is |
| against a symbol in a shared library, then we can't know |
| where the symbol will end up. So, we create a relocation |
| record in the output, and leave the job up to the dynamic |
| linker. */ |
| value = addend; |
| if (!mips_elf64_create_dynamic_relocation (abfd, info, relocation, |
| h, sec, symbol, &value, |
| input_section)) |
| return false; |
| } |
| else |
| { |
| if (r_type != R_MIPS_REL32) |
| value = symbol + addend; |
| else |
| value = addend; |
| } |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_PC32: |
| case R_MIPS_PC64: |
| case R_MIPS_GNU_REL_LO16: |
| value = symbol + addend - p; |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_GNU_REL16_S2: |
| value = symbol + mips_elf64_sign_extend (addend << 2, 18) - p; |
| overflowed_p = mips_elf64_overflow_p (value, 18); |
| value = (value >> 2) & howto->dst_mask; |
| break; |
| |
| case R_MIPS_GNU_REL_HI16: |
| value = mips_elf64_high (addend + symbol - p); |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS16_26: |
| /* The calculation for R_MIPS16_26 is just the same as for an |
| R_MIPS_26. It's only the storage of the relocated field into |
| the output file that's different. That's handled in |
| mips_elf_perform_relocation. So, we just fall through to the |
| R_MIPS_26 case here. */ |
| case R_MIPS_26: |
| if (local_p) |
| value = (((addend << 2) | ((p + 4) & 0xf0000000)) + symbol) >> 2; |
| else |
| value = (mips_elf64_sign_extend (addend << 2, 28) + symbol) >> 2; |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_HI16: |
| value = mips_elf64_high (addend + symbol); |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_LO16: |
| value = (addend + symbol) & 0xffff; |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_LITERAL: |
| /* Because we don't merge literal sections, we can handle this |
| just like R_MIPS_GPREL16. In the long run, we should merge |
| shared literals, and then we will need to additional work |
| here. */ |
| |
| /* Fall through. */ |
| |
| case R_MIPS_GPREL16: |
| if (local_p) |
| value = mips_elf64_sign_extend (addend, 16) + symbol + gp0 - gp; |
| else |
| value = mips_elf64_sign_extend (addend, 16) + symbol - gp; |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| break; |
| |
| case R_MIPS_PC16: |
| value = mips_elf64_sign_extend (addend, 16) + symbol - p; |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| value = (bfd_vma) ((bfd_signed_vma) value / 4); |
| break; |
| |
| case R_MIPS_GOT16: |
| case R_MIPS_CALL16: |
| if (local_p) |
| { |
| boolean forced; |
| |
| /* The special case is when the symbol is forced to be local. We |
| need the full address in the GOT since no R_MIPS_LO16 relocation |
| follows. */ |
| forced = ! mips_elf64_local_relocation_p (input_bfd, relocation, |
| local_sections, false); |
| value = mips_elf64_got16_entry (abfd, info, symbol + addend, forced); |
| if (value == (bfd_vma) -1) |
| return false; |
| value |
| = mips_elf64_got_offset_from_index (elf_hash_table (info)->dynobj, |
| abfd, |
| value); |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| break; |
| } |
| |
| /* Fall through. */ |
| |
| case R_MIPS_GOT_DISP: |
| value = g; |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| break; |
| |
| case R_MIPS_GPREL32: |
| value = (addend + symbol + gp0 - gp) & howto->dst_mask; |
| break; |
| |
| case R_MIPS_GOT_HI16: |
| case R_MIPS_CALL_HI16: |
| /* We're allowed to handle these two relocations identically. |
| The dynamic linker is allowed to handle the CALL relocations |
| differently by creating a lazy evaluation stub. */ |
| value = g; |
| value = mips_elf64_high (value); |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_GOT_LO16: |
| case R_MIPS_CALL_LO16: |
| value = g & howto->dst_mask; |
| break; |
| |
| case R_MIPS_GOT_PAGE: |
| value = mips_elf64_got_page (abfd, info, symbol + addend, NULL); |
| if (value == (bfd_vma) -1) |
| return false; |
| value = mips_elf64_got_offset_from_index (elf_hash_table (info)->dynobj, |
| abfd, |
| value); |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| break; |
| |
| case R_MIPS_GOT_OFST: |
| mips_elf64_got_page (abfd, info, symbol + addend, &value); |
| overflowed_p = mips_elf64_overflow_p (value, 16); |
| break; |
| |
| case R_MIPS_SUB: |
| value = symbol - addend; |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_HIGHER: |
| value = mips_elf64_higher (addend + symbol); |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_HIGHEST: |
| value = mips_elf64_highest (addend + symbol); |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_SCN_DISP: |
| value = symbol + addend - sec->output_offset; |
| value &= howto->dst_mask; |
| break; |
| |
| case R_MIPS_PJUMP: |
| case R_MIPS_JALR: |
| /* Both of these may be ignored. R_MIPS_JALR is an optimization |
| hint; we could improve performance by honoring that hint. */ |
| return bfd_reloc_continue; |
| |
| case R_MIPS_GNU_VTINHERIT: |
| case R_MIPS_GNU_VTENTRY: |
| /* We don't do anything with these at present. */ |
| return bfd_reloc_continue; |
| |
| default: |
| /* An unrecognized relocation type. */ |
| return bfd_reloc_notsupported; |
| } |
| |
| /* Store the VALUE for our caller. */ |
| *valuep = value; |
| return overflowed_p ? bfd_reloc_overflow : bfd_reloc_ok; |
| } |
| |
| /* Obtain the field relocated by RELOCATION. */ |
| |
| static bfd_vma |
| mips_elf64_obtain_contents (howto, relocation, input_bfd, contents) |
| reloc_howto_type *howto; |
| const Elf_Internal_Rela *relocation; |
| bfd *input_bfd; |
| bfd_byte *contents; |
| { |
| bfd_byte *location = contents + relocation->r_offset; |
| |
| /* Obtain the bytes. */ |
| return bfd_get (8 * bfd_get_reloc_size (howto), input_bfd, location); |
| } |
| |
| /* It has been determined that the result of the RELOCATION is the |
| VALUE. Use HOWTO to place VALUE into the output file at the |
| appropriate position. The SECTION is the section to which the |
| relocation applies. If REQUIRE_JALX is true, then the opcode used |
| for the relocation must be either JAL or JALX, and it is |
| unconditionally converted to JALX. |
| |
| Returns false if anything goes wrong. */ |
| |
| static boolean |
| mips_elf64_perform_relocation (info, howto, relocation, value, |
| input_bfd, input_section, |
| contents, require_jalx) |
| struct bfd_link_info *info; |
| reloc_howto_type *howto; |
| const Elf_Internal_Rela *relocation; |
| bfd_vma value; |
| bfd *input_bfd; |
| asection *input_section; |
| bfd_byte *contents; |
| boolean require_jalx; |
| { |
| bfd_vma x; |
| bfd_byte *location; |
| int r_type = ELF32_R_TYPE (relocation->r_info); |
| |
| /* Figure out where the relocation is occurring. */ |
| location = contents + relocation->r_offset; |
| |
| /* Obtain the current value. */ |
| x = mips_elf64_obtain_contents (howto, relocation, input_bfd, contents); |
| |
| /* Clear the field we are setting. */ |
| x &= ~howto->dst_mask; |
| |
| /* If this is the R_MIPS16_26 relocation, we must store the |
| value in a funny way. */ |
| if (r_type == R_MIPS16_26) |
| { |
| /* R_MIPS16_26 is used for the mips16 jal and jalx instructions. |
| Most mips16 instructions are 16 bits, but these instructions |
| are 32 bits. |
| |
| The format of these instructions is: |
| |
| +--------------+--------------------------------+ |
| ! JALX ! X! Imm 20:16 ! Imm 25:21 ! |
| +--------------+--------------------------------+ |
| ! Immediate 15:0 ! |
| +-----------------------------------------------+ |
| |
| JALX is the 5-bit value 00011. X is 0 for jal, 1 for jalx. |
| Note that the immediate value in the first word is swapped. |
| |
| When producing a relocateable object file, R_MIPS16_26 is |
| handled mostly like R_MIPS_26. In particular, the addend is |
| stored as a straight 26-bit value in a 32-bit instruction. |
| (gas makes life simpler for itself by never adjusting a |
| R_MIPS16_26 reloc to be against a section, so the addend is |
| always zero). However, the 32 bit instruction is stored as 2 |
| 16-bit values, rather than a single 32-bit value. In a |
| big-endian file, the result is the same; in a little-endian |
| file, the two 16-bit halves of the 32 bit value are swapped. |
| This is so that a disassembler can recognize the jal |
| instruction. |
| |
| When doing a final link, R_MIPS16_26 is treated as a 32 bit |
| instruction stored as two 16-bit values. The addend A is the |
| contents of the targ26 field. The calculation is the same as |
| R_MIPS_26. When storing the calculated value, reorder the |
| immediate value as shown above, and don't forget to store the |
| value as two 16-bit values. |
| |
| To put it in MIPS ABI terms, the relocation field is T-targ26-16, |
| defined as |
| |
| big-endian: |
| +--------+----------------------+ |
| | | | |
| | | targ26-16 | |
| |31 26|25 0| |
| +--------+----------------------+ |
| |
| little-endian: |
| +----------+------+-------------+ |
| | | | | |
| | sub1 | | sub2 | |
| |0 9|10 15|16 31| |
| +----------+--------------------+ |
| where targ26-16 is sub1 followed by sub2 (i.e., the addend field A is |
| ((sub1 << 16) | sub2)). |
| |
| When producing a relocateable object file, the calculation is |
| (((A < 2) | ((P + 4) & 0xf0000000) + S) >> 2) |
| When producing a fully linked file, the calculation is |
| let R = (((A < 2) | ((P + 4) & 0xf0000000) + S) >> 2) |
| ((R & 0x1f0000) << 5) | ((R & 0x3e00000) >> 5) | (R & 0xffff) */ |
| |
| if (!info->relocateable) |
| /* Shuffle the bits according to the formula above. */ |
| value = (((value & 0x1f0000) << 5) |
| | ((value & 0x3e00000) >> 5) |
| | (value & 0xffff)); |
| } |
| else if (r_type == R_MIPS16_GPREL) |
| { |
| /* R_MIPS16_GPREL is used for GP-relative addressing in mips16 |
| mode. A typical instruction will have a format like this: |
| |
| +--------------+--------------------------------+ |
| ! EXTEND ! Imm 10:5 ! Imm 15:11 ! |
| +--------------+--------------------------------+ |
| ! Major ! rx ! ry ! Imm 4:0 ! |
| +--------------+--------------------------------+ |
| |
| EXTEND is the five bit value 11110. Major is the instruction |
| opcode. |
| |
| This is handled exactly like R_MIPS_GPREL16, except that the |
| addend is retrieved and stored as shown in this diagram; that |
| is, the Imm fields above replace the V-rel16 field. |
| |
| All we need to do here is shuffle the bits appropriately. As |
| above, the two 16-bit halves must be swapped on a |
| little-endian system. */ |
| value = (((value & 0x7e0) << 16) |
| | ((value & 0xf800) << 5) |
| | (value & 0x1f)); |
| } |
| |
| /* Set the field. */ |
| x |= (value & howto->dst_mask); |
| |
| /* If required, turn JAL into JALX. */ |
| if (require_jalx) |
| { |
| boolean ok; |
| bfd_vma opcode = x >> 26; |
| bfd_vma jalx_opcode; |
| |
| /* Check to see if the opcode is already JAL or JALX. */ |
| if (r_type == R_MIPS16_26) |
| { |
| ok = ((opcode == 0x6) || (opcode == 0x7)); |
| jalx_opcode = 0x7; |
| } |
| else |
| { |
| ok = ((opcode == 0x3) || (opcode == 0x1d)); |
| jalx_opcode = 0x1d; |
| } |
| |
| /* If the opcode is not JAL or JALX, there's a problem. */ |
| if (!ok) |
| { |
| (*_bfd_error_handler) |
| (_("%s: %s+0x%lx: jump to stub routine which is not jal"), |
| bfd_archive_filename (input_bfd), |
| input_section->name, |
| (unsigned long) relocation->r_offset); |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| |
| /* Make this the JALX opcode. */ |
| x = (x & ~(0x3f << 26)) | (jalx_opcode << 26); |
| } |
| |
| /* Swap the high- and low-order 16 bits on little-endian systems |
| when doing a MIPS16 relocation. */ |
| if ((r_type == R_MIPS16_GPREL || r_type == R_MIPS16_26) |
| && bfd_little_endian (input_bfd)) |
| x = (((x & 0xffff) << 16) | ((x & 0xffff0000) >> 16)); |
| |
| /* Put the value into the output. */ |
| bfd_put (8 * bfd_get_reloc_size (howto), input_bfd, x, location); |
| return true; |
| } |
| |
| /* Returns true if SECTION is a MIPS16 stub section. */ |
| |
| static boolean |
| mips_elf64_stub_section_p (abfd, section) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| asection *section; |
| { |
| const char *name = bfd_get_section_name (abfd, section); |
| |
| return (strncmp (name, FN_STUB, sizeof FN_STUB - 1) == 0 |
| || strncmp (name, CALL_STUB, sizeof CALL_STUB - 1) == 0 |
| || strncmp (name, CALL_FP_STUB, sizeof CALL_FP_STUB - 1) == 0); |
| } |
| |
| /* Relocate a MIPS ELF64 section. */ |
| |
| static boolean |
| mips_elf64_relocate_section (output_bfd, info, input_bfd, input_section, |
| contents, relocs, local_syms, local_sections) |
| bfd *output_bfd; |
| struct bfd_link_info *info; |
| bfd *input_bfd; |
| asection *input_section; |
| bfd_byte *contents; |
| Elf_Internal_Rela *relocs; |
| Elf_Internal_Sym *local_syms; |
| asection **local_sections; |
| { |
| Elf_Internal_Rela *rel; |
| const Elf_Internal_Rela *relend; |
| bfd_vma addend = 0; |
| boolean use_saved_addend_p = false; |
| struct elf_backend_data *bed; |
| |
| bed = get_elf_backend_data (output_bfd); |
| relend = relocs + input_section->reloc_count * bed->s->int_rels_per_ext_rel; |
| for (rel = relocs; rel < relend; ++rel) |
| { |
| const char *name; |
| bfd_vma value; |
| reloc_howto_type *howto; |
| boolean require_jalx; |
| /* True if the relocation is a RELA relocation, rather than a |
| REL relocation. */ |
| boolean rela_relocation_p = true; |
| int r_type = ELF64_MIPS_R_TYPE (rel->r_info); |
| const char *msg = (const char *) NULL; |
| |
| /* Find the relocation howto for this relocation. */ |
| howto = &mips_elf64_howto_table_rela[r_type]; |
| |
| if (!use_saved_addend_p) |
| { |
| Elf_Internal_Shdr *rel_hdr; |
| |
| /* If these relocations were originally of the REL variety, |
| we must pull the addend out of the field that will be |
| relocated. Otherwise, we simply use the contents of the |
| RELA relocation. To determine which flavor or relocation |
| this is, we depend on the fact that the INPUT_SECTION's |
| REL_HDR is read before its REL_HDR2. */ |
| rel_hdr = &elf_section_data (input_section)->rel_hdr; |
| if ((size_t) (rel - relocs) |
| >= (NUM_SHDR_ENTRIES (rel_hdr) * bed->s->int_rels_per_ext_rel)) |
| rel_hdr = elf_section_data (input_section)->rel_hdr2; |
| if (rel_hdr->sh_entsize |
| == (get_elf_backend_data (input_bfd)->s->sizeof_rel)) |
| { |
| /* Note that this is a REL relocation. */ |
| rela_relocation_p = false; |
| |
| /* Find the relocation howto for this relocation. */ |
| howto = &mips_elf64_howto_table_rel[r_type]; |
| |
| /* Get the addend, which is stored in the input file. */ |
| addend = mips_elf64_obtain_contents (howto, |
| rel, |
| input_bfd, |
| contents); |
| addend &= howto->src_mask; |
| |
| /* For some kinds of relocations, the ADDEND is a |
| combination of the addend stored in two different |
| relocations. */ |
| if (r_type == R_MIPS_HI16 |
| || r_type == R_MIPS_GNU_REL_HI16 |
| || (r_type == R_MIPS_GOT16 |
| && mips_elf64_local_relocation_p (input_bfd, rel, |
| local_sections, false))) |
| { |
| bfd_vma l; |
| const Elf_Internal_Rela *lo16_relocation; |
| reloc_howto_type *lo16_howto; |
| int lo; |
| |
| /* The combined value is the sum of the HI16 addend, |
| left-shifted by sixteen bits, and the LO16 |
| addend, sign extended. (Usually, the code does |
| a `lui' of the HI16 value, and then an `addiu' of |
| the LO16 value.) |
| |
| Scan ahead to find a matching LO16 relocation. */ |
| if (r_type == R_MIPS_GNU_REL_HI16) |
| lo = R_MIPS_GNU_REL_LO16; |
| else |
| lo = R_MIPS_LO16; |
| lo16_relocation |
| = mips_elf64_next_relocation (lo, rel, relend); |
| if (lo16_relocation == NULL) |
| return false; |
| |
| /* Obtain the addend kept there. */ |
| if (rela_relocation_p == false) |
| lo16_howto = &mips_elf64_howto_table_rel[lo]; |
| else |
| lo16_howto = &mips_elf64_howto_table_rela[lo]; |
| l = mips_elf64_obtain_contents (lo16_howto, |
| lo16_relocation, |
| input_bfd, contents); |
| l &= lo16_howto->src_mask; |
| l = mips_elf64_sign_extend (l, 16); |
| |
| addend <<= 16; |
| |
| /* Compute the combined addend. */ |
| addend += l; |
| } |
| } |
| else |
| addend = rel->r_addend; |
| } |
| |
| if (info->relocateable) |
| { |
| Elf_Internal_Sym *sym; |
| unsigned long r_symndx; |
| |
| /* Since we're just relocating, all we need to do is copy |
| the relocations back out to the object file, unless |
| they're against a section symbol, in which case we need |
| to adjust by the section offset, or unless they're GP |
| relative in which case we need to adjust by the amount |
| that we're adjusting GP in this relocateable object. */ |
| |
| if (!mips_elf64_local_relocation_p (input_bfd, rel, local_sections, |
| false)) |
| /* There's nothing to do for non-local relocations. */ |
| continue; |
| |
| if (r_type == R_MIPS_GPREL16 |
| || r_type == R_MIPS_GPREL32 |
| || r_type == R_MIPS_LITERAL) |
| addend -= (_bfd_get_gp_value (output_bfd) |
| - _bfd_get_gp_value (input_bfd)); |
| else if (r_type == R_MIPS_26 || r_type == R_MIPS_GNU_REL16_S2) |
| /* The addend is stored without its two least |
| significant bits (which are always zero.) In a |
| non-relocateable link, calculate_relocation will do |
| this shift; here, we must do it ourselves. */ |
| addend <<= 2; |
| |
| r_symndx = ELF64_R_SYM (rel->r_info); |
| sym = local_syms + r_symndx; |
| if (ELF_ST_TYPE (sym->st_info) == STT_SECTION) |
| /* Adjust the addend appropriately. */ |
| addend += local_sections[r_symndx]->output_offset; |
| |
| #if 0 |
| /* If the relocation is for a R_MIPS_HI16 or R_MIPS_GOT16, |
| then we only want to write out the high-order 16 bits. |
| The subsequent R_MIPS_LO16 will handle the low-order bits. */ |
| if (r_type == R_MIPS_HI16 || r_type == R_MIPS_GOT16 |
| || r_type == R_MIPS_GNU_REL_HI16) |
| addend = mips_elf64_high (addend); |
| else if (r_type == R_MIPS_HIGHER) |
| addend = mips_elf64_higher (addend); |
| else if (r_type == R_MIPS_HIGHEST) |
| addend = mips_elf64_highest (addend); |
| #endif |
| /* If the relocation is for an R_MIPS_26 relocation, then |
| the two low-order bits are not stored in the object file; |
| they are implicitly zero. */ |
| if (r_type == R_MIPS_26 || r_type == R_MIPS_GNU_REL16_S2) |
| addend >>= 2; |
| |
| if (rela_relocation_p) |
| /* If this is a RELA relocation, just update the addend. |
| We have to cast away constness for REL. */ |
| rel->r_addend = addend; |
| else |
| { |
| /* Otherwise, we have to write the value back out. Note |
| that we use the source mask, rather than the |
| destination mask because the place to which we are |
| writing will be source of the addend in the final |
| link. */ |
| addend &= howto->src_mask; |
| |
| if (!mips_elf64_perform_relocation (info, howto, rel, addend, |
| input_bfd, input_section, |
| contents, false)) |
| return false; |
| } |
| |
| /* Go on to the next relocation. */ |
| continue; |
| } |
| |
| /* In the N32 and 64-bit ABIs there may be multiple consecutive |
| relocations for the same offset. In that case we are |
| supposed to treat the output of each relocation as the addend |
| for the next. */ |
| if (rel + 1 < relend |
| && rel->r_offset == rel[1].r_offset |
| && ELF64_MIPS_R_TYPE (rel[1].r_info) != R_MIPS_NONE) |
| use_saved_addend_p = true; |
| else |
| use_saved_addend_p = false; |
| |
| /* Figure out what value we are supposed to relocate. */ |
| switch (mips_elf64_calculate_relocation (output_bfd, input_bfd, |
| input_section, info, rel, |
| addend, howto, local_syms, |
| local_sections, &value, &name, |
| &require_jalx)) |
| { |
| case bfd_reloc_continue: |
| /* There's nothing to do. */ |
| continue; |
| |
| case bfd_reloc_undefined: |
| /* mips_elf64_calculate_relocation already called the |
| undefined_symbol callback. There's no real point in |
| trying to perform the relocation at this point, so we |
| just skip ahead to the next relocation. */ |
| continue; |
| |
| case bfd_reloc_notsupported: |
| msg = _("internal error: unsupported relocation error"); |
| info->callbacks->warning |
| (info, msg, name, input_bfd, input_section, rel->r_offset); |
| return false; |
| |
| case bfd_reloc_overflow: |
| if (use_saved_addend_p) |
| /* Ignore overflow until we reach the last relocation for |
| a given location. */ |
| ; |
| else |
| { |
| BFD_ASSERT (name != NULL); |
| if (! ((*info->callbacks->reloc_overflow) |
| (info, name, howto->name, (bfd_vma) 0, |
| input_bfd, input_section, rel->r_offset))) |
| return false; |
| } |
| break; |
| |
| case bfd_reloc_ok: |
| break; |
| |
| default: |
| abort (); |
| break; |
| } |
| |
| /* If we've got another relocation for the address, keep going |
| until we reach the last one. */ |
| if (use_saved_addend_p) |
| { |
| addend = value; |
| continue; |
| } |
| |
| /* Actually perform the relocation. */ |
| if (!mips_elf64_perform_relocation (info, howto, rel, value, input_bfd, |
| input_section, contents, |
| require_jalx)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Create dynamic sections when linking against a dynamic object. */ |
| |
| boolean |
| mips_elf64_create_dynamic_sections (abfd, info) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| { |
| flagword flags; |
| register asection *s; |
| |
| flags = (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY |
| | SEC_LINKER_CREATED | SEC_READONLY); |
| |
| /* Mips ABI requests the .dynamic section to be read only. */ |
| s = bfd_get_section_by_name (abfd, ".dynamic"); |
| if (s != NULL) |
| { |
| if (! bfd_set_section_flags (abfd, s, flags)) |
| return false; |
| } |
| |
| /* We need to create .got section. */ |
| if (! mips_elf64_create_got_section (abfd, info)) |
| return false; |
| |
| /* Create the .msym section on IRIX6. It is used by the dynamic |
| linker to speed up dynamic relocations, and to avoid computing |
| the ELF hash for symbols. */ |
| if (!mips_elf64_create_msym_section (abfd)) |
| return false; |
| |
| /* Create .stub section. */ |
| if (bfd_get_section_by_name (abfd, ".MIPS.stubs") == NULL) |
| { |
| s = bfd_make_section (abfd, ".MIPS.stubs"); |
| if (s == NULL |
| || ! bfd_set_section_flags (abfd, s, flags | SEC_CODE) |
| || ! bfd_set_section_alignment (abfd, s, 3)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Adjust a symbol defined by a dynamic object and referenced by a |
| regular object. The current definition is in some section of the |
| dynamic object, but we're not including those sections. We have to |
| change the definition to something the rest of the link can |
| understand. */ |
| |
| boolean |
| mips_elf64_adjust_dynamic_symbol (info, h) |
| struct bfd_link_info *info; |
| struct elf_link_hash_entry *h; |
| { |
| bfd *dynobj; |
| struct mips_elf64_link_hash_entry *hmips; |
| asection *s; |
| |
| dynobj = elf_hash_table (info)->dynobj; |
| |
| /* Make sure we know what is going on here. */ |
| BFD_ASSERT (dynobj != NULL |
| && ((h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) |
| || h->weakdef != NULL |
| || ((h->elf_link_hash_flags |
| & ELF_LINK_HASH_DEF_DYNAMIC) != 0 |
| && (h->elf_link_hash_flags |
| & ELF_LINK_HASH_REF_REGULAR) != 0 |
| && (h->elf_link_hash_flags |
| & ELF_LINK_HASH_DEF_REGULAR) == 0))); |
| |
| /* If this symbol is defined in a dynamic object, we need to copy |
| any R_MIPS_32 or R_MIPS_REL32 relocs against it into the output |
| file. */ |
| hmips = (struct mips_elf64_link_hash_entry *) h; |
| if (! info->relocateable |
| && hmips->possibly_dynamic_relocs != 0 |
| && (h->root.type == bfd_link_hash_defweak |
| || (h->elf_link_hash_flags |
| & ELF_LINK_HASH_DEF_REGULAR) == 0)) |
| { |
| mips_elf64_allocate_dynamic_relocations (dynobj, |
| hmips->possibly_dynamic_relocs); |
| if (hmips->readonly_reloc) |
| /* We tell the dynamic linker that there are relocations |
| against the text segment. */ |
| info->flags |= DF_TEXTREL; |
| } |
| |
| /* For a function, create a stub, if allowed. */ |
| if (! hmips->no_fn_stub |
| && (h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0) |
| { |
| if (! elf_hash_table (info)->dynamic_sections_created) |
| return true; |
| |
| /* If this symbol is not defined in a regular file, then set |
| the symbol to the stub location. This is required to make |
| function pointers compare as equal between the normal |
| executable and the shared library. */ |
| if ((h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0) |
| { |
| /* We need .stub section. */ |
| s = bfd_get_section_by_name (dynobj, ".MIPS.stubs"); |
| BFD_ASSERT (s != NULL); |
| |
| h->root.u.def.section = s; |
| h->root.u.def.value = s->_raw_size; |
| |
| /* XXX Write this stub address somewhere. */ |
| h->plt.offset = s->_raw_size; |
| |
| /* Make room for this stub code. */ |
| s->_raw_size += MIPS_FUNCTION_STUB_SIZE; |
| |
| /* The last half word of the stub will be filled with the index |
| of this symbol in .dynsym section. */ |
| return true; |
| } |
| } |
| else if ((h->type == STT_FUNC) |
| && (h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) == 0) |
| { |
| /* This will set the entry for this symbol in the GOT to 0, and |
| the dynamic linker will take care of this. */ |
| h->root.u.def.value = 0; |
| return true; |
| } |
| |
| /* If this is a weak symbol, and there is a real definition, the |
| processor independent code will have arranged for us to see the |
| real definition first, and we can just use the same value. */ |
| if (h->weakdef != NULL) |
| { |
| BFD_ASSERT (h->weakdef->root.type == bfd_link_hash_defined |
| || h->weakdef->root.type == bfd_link_hash_defweak); |
| h->root.u.def.section = h->weakdef->root.u.def.section; |
| h->root.u.def.value = h->weakdef->root.u.def.value; |
| return true; |
| } |
| |
| /* This is a reference to a symbol defined by a dynamic object which |
| is not a function. */ |
| |
| return true; |
| } |
| |
| /* This function is called after all the input files have been read, |
| and the input sections have been assigned to output sections. */ |
| |
| boolean |
| mips_elf64_always_size_sections (output_bfd, info) |
| bfd *output_bfd ATTRIBUTE_UNUSED; |
| struct bfd_link_info *info ATTRIBUTE_UNUSED; |
| { |
| if (info->relocateable |
| || ! mips_elf64_hash_table (info)->mips16_stubs_seen) |
| return true; |
| |
| mips_elf64_link_hash_traverse (mips_elf64_hash_table (info), |
| mips_elf64_check_mips16_stubs, |
| (PTR) NULL); |
| |
| return true; |
| } |
| |
| /* Check the mips16 stubs for a particular symbol, and see if we can |
| discard them. */ |
| |
| static boolean |
| mips_elf64_check_mips16_stubs (h, data) |
| struct mips_elf64_link_hash_entry *h; |
| PTR data ATTRIBUTE_UNUSED; |
| { |
| if (h->fn_stub != NULL |
| && ! h->need_fn_stub) |
| { |
| /* We don't need the fn_stub; the only references to this symbol |
| are 16 bit calls. Clobber the size to 0 to prevent it from |
| being included in the link. */ |
| h->fn_stub->_raw_size = 0; |
| h->fn_stub->_cooked_size = 0; |
| h->fn_stub->flags &= ~SEC_RELOC; |
| h->fn_stub->reloc_count = 0; |
| h->fn_stub->flags |= SEC_EXCLUDE; |
| } |
| |
| if (h->call_stub != NULL |
| && h->root.other == STO_MIPS16) |
| { |
| /* We don't need the call_stub; this is a 16 bit function, so |
| calls from other 16 bit functions are OK. Clobber the size |
| to 0 to prevent it from being included in the link. */ |
| h->call_stub->_raw_size = 0; |
| h->call_stub->_cooked_size = 0; |
| h->call_stub->flags &= ~SEC_RELOC; |
| h->call_stub->reloc_count = 0; |
| h->call_stub->flags |= SEC_EXCLUDE; |
| } |
| |
| if (h->call_fp_stub != NULL |
| && h->root.other == STO_MIPS16) |
| { |
| /* We don't need the call_stub; this is a 16 bit function, so |
| calls from other 16 bit functions are OK. Clobber the size |
| to 0 to prevent it from being included in the link. */ |
| h->call_fp_stub->_raw_size = 0; |
| h->call_fp_stub->_cooked_size = 0; |
| h->call_fp_stub->flags &= ~SEC_RELOC; |
| h->call_fp_stub->reloc_count = 0; |
| h->call_fp_stub->flags |= SEC_EXCLUDE; |
| } |
| |
| return true; |
| } |
| |
| /* Set the sizes of the dynamic sections. */ |
| |
| boolean |
| mips_elf64_size_dynamic_sections (output_bfd, info) |
| bfd *output_bfd; |
| struct bfd_link_info *info; |
| { |
| bfd *dynobj; |
| asection *s; |
| boolean reltext; |
| struct mips_elf64_got_info *g = NULL; |
| |
| dynobj = elf_hash_table (info)->dynobj; |
| BFD_ASSERT (dynobj != NULL); |
| |
| if (elf_hash_table (info)->dynamic_sections_created) |
| { |
| /* Set the contents of the .interp section to the interpreter. */ |
| if (! info->shared) |
| { |
| s = bfd_get_section_by_name (dynobj, ".interp"); |
| BFD_ASSERT (s != NULL); |
| s->_raw_size = strlen ("/usr/lib64/libc.so.1") + 1; |
| s->contents = (bfd_byte *) "/usr/lib64/libc.so.1"; |
| } |
| } |
| |
| /* The check_relocs and adjust_dynamic_symbol entry points have |
| determined the sizes of the various dynamic sections. Allocate |
| memory for them. */ |
| reltext = false; |
| for (s = dynobj->sections; s != NULL; s = s->next) |
| { |
| const char *name; |
| boolean strip; |
| |
| /* It's OK to base decisions on the section name, because none |
| of the dynobj section names depend upon the input files. */ |
| name = bfd_get_section_name (dynobj, s); |
| |
| if ((s->flags & SEC_LINKER_CREATED) == 0) |
| continue; |
| |
| strip = false; |
| |
| if (strncmp (name, ".rel", 4) == 0) |
| { |
| if (s->_raw_size == 0) |
| { |
| /* We only strip the section if the output section name |
| has the same name. Otherwise, there might be several |
| input sections for this output section. FIXME: This |
| code is probably not needed these days anyhow, since |
| the linker now does not create empty output sections. */ |
| if (s->output_section != NULL |
| && strcmp (name, |
| bfd_get_section_name (s->output_section->owner, |
| s->output_section)) == 0) |
| strip = true; |
| } |
| else |
| { |
| const char *outname; |
| asection *target; |
| |
| /* If this relocation section applies to a read only |
| section, then we probably need a DT_TEXTREL entry. |
| If the relocation section is .rel.dyn, we always |
| assert a DT_TEXTREL entry rather than testing whether |
| there exists a relocation to a read only section or |
| not. */ |
| outname = bfd_get_section_name (output_bfd, |
| s->output_section); |
| target = bfd_get_section_by_name (output_bfd, outname + 4); |
| if ((target != NULL |
| && (target->flags & SEC_READONLY) != 0 |
| && (target->flags & SEC_ALLOC) != 0) |
| || strcmp (outname, "rel.dyn") == 0) |
| reltext = true; |
| |
| /* We use the reloc_count field as a counter if we need |
| to copy relocs into the output file. */ |
| if (strcmp (name, "rel.dyn") != 0) |
| s->reloc_count = 0; |
| } |
| } |
| else if (strncmp (name, ".got", 4) == 0) |
| { |
| int i; |
| bfd_size_type loadable_size = 0; |
| bfd_size_type local_gotno; |
| bfd *sub; |
| |
| BFD_ASSERT (elf_section_data (s) != NULL); |
| g = (struct mips_elf64_got_info *) elf_section_data (s)->tdata; |
| BFD_ASSERT (g != NULL); |
| |
| /* Calculate the total loadable size of the output. That |
| will give us the maximum number of GOT_PAGE entries |
| required. */ |
| for (sub = info->input_bfds; sub; sub = sub->link_next) |
| { |
| asection *subsection; |
| |
| for (subsection = sub->sections; |
| subsection; |
| subsection = subsection->next) |
| { |
| if ((subsection->flags & SEC_ALLOC) == 0) |
| continue; |
| loadable_size += (subsection->_raw_size + 0xf) & ~0xf; |
| } |
| } |
| loadable_size += MIPS_FUNCTION_STUB_SIZE; |
| |
| /* Assume there are two loadable segments consisting of |
| contiguous sections. Is 5 enough? */ |
| local_gotno = (loadable_size >> 16) + 5; |
| /* It's possible we will need GOT_PAGE entries as well as |
| GOT16 entries. Often, these will be able to share GOT |
| entries, but not always. */ |
| local_gotno *= 2; |
| |
| g->local_gotno += local_gotno; |
| s->_raw_size += local_gotno * 8; |
| |
| /* There has to be a global GOT entry for every symbol with |
| a dynamic symbol table index of DT_MIPS_GOTSYM or |
| higher. Therefore, it make sense to put those symbols |
| that need GOT entries at the end of the symbol table. We |
| do that here. */ |
| if (!mips_elf64_sort_hash_table (info, 1)) |
| return false; |
| |
| if (g->global_gotsym != NULL) |
| i = elf_hash_table (info)->dynsymcount - g->global_gotsym->dynindx; |
| else |
| /* If there are no global symbols, or none requiring |
| relocations, then GLOBAL_GOTSYM will be NULL. */ |
| i = 0; |
| g->global_gotno = i; |
| s->_raw_size += i * 8; |
| } |
| else if (strcmp (name, ".MIPS.stubs") == 0) |
| { |
| /* Irix rld assumes that the function stub isn't at the end |
| of .text section. So put a dummy. XXX */ |
| s->_raw_size += MIPS_FUNCTION_STUB_SIZE; |
| } |
| else if (strcmp (name, ".msym") |
| == 0) |
| s->_raw_size = (sizeof (Elf32_External_Msym) |
| * (elf_hash_table (info)->dynsymcount |
| + bfd_count_sections (output_bfd))); |
| else if (strncmp (name, ".init", 5) != 0) |
| { |
| /* It's not one of our sections, so don't allocate space. */ |
| continue; |
| } |
| |
| if (strip) |
| { |
| _bfd_strip_section_from_output (info, s); |
| continue; |
| } |
| |
| /* Allocate memory for the section contents. */ |
| s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->_raw_size); |
| if (s->contents == NULL && s->_raw_size != 0) |
| { |
| bfd_set_error (bfd_error_no_memory); |
| return false; |
| } |
| } |
| |
| if (elf_hash_table (info)->dynamic_sections_created) |
| { |
| /* Add some entries to the .dynamic section. We fill in the |
| values later, in elf_mips_finish_dynamic_sections, but we |
| must add the entries now so that we get the correct size for |
| the .dynamic section. The DT_DEBUG entry is filled in by the |
| dynamic linker and used by the debugger. */ |
| if (! info->shared) |
| { |
| /* SGI object has the equivalence of DT_DEBUG in the |
| DT_MIPS_RLD_MAP entry. */ |
| if (!bfd_elf64_add_dynamic_entry (info, DT_MIPS_RLD_MAP, 0)) |
| return false; |
| if (!SGI_COMPAT (output_bfd)) |
| { |
| if (!bfd_elf64_add_dynamic_entry (info, DT_DEBUG, 0)) |
| return false; |
| } |
| } |
| else |
| { |
| /* Shared libraries on traditional mips have DT_DEBUG. */ |
| if (!SGI_COMPAT (output_bfd)) |
| { |
| if (!bfd_elf64_add_dynamic_entry (info, DT_DEBUG, 0)) |
| return false; |
| } |
| } |
| |
| if (reltext && SGI_COMPAT (output_bfd)) |
| info->flags |= DF_TEXTREL; |
| |
| if ((info->flags & DF_TEXTREL) != 0) |
| { |
| if (! bfd_elf64_add_dynamic_entry (info, DT_TEXTREL, 0)) |
| return false; |
| } |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_PLTGOT, 0)) |
| return false; |
| |
| if (bfd_get_section_by_name (dynobj, "rel.dyn")) |
| { |
| if (! bfd_elf64_add_dynamic_entry (info, DT_REL, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_RELSZ, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_RELENT, 0)) |
| return false; |
| } |
| |
| if (SGI_COMPAT (output_bfd)) |
| { |
| if (!bfd_elf64_add_dynamic_entry (info, DT_MIPS_CONFLICTNO, 0)) |
| return false; |
| } |
| |
| if (SGI_COMPAT (output_bfd)) |
| { |
| if (!bfd_elf64_add_dynamic_entry (info, DT_MIPS_LIBLISTNO, 0)) |
| return false; |
| } |
| |
| if (bfd_get_section_by_name (dynobj, ".conflict") != NULL) |
| { |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_CONFLICT, 0)) |
| return false; |
| |
| s = bfd_get_section_by_name (dynobj, ".liblist"); |
| BFD_ASSERT (s != NULL); |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_LIBLIST, 0)) |
| return false; |
| } |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_RLD_VERSION, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_FLAGS, 0)) |
| return false; |
| |
| #if 0 |
| /* Time stamps in executable files are a bad idea. */ |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_TIME_STAMP, 0)) |
| return false; |
| #endif |
| |
| #if 0 /* FIXME */ |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_ICHECKSUM, 0)) |
| return false; |
| #endif |
| |
| #if 0 /* FIXME */ |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_IVERSION, 0)) |
| return false; |
| #endif |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_BASE_ADDRESS, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_LOCAL_GOTNO, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_SYMTABNO, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_UNREFEXTNO, 0)) |
| return false; |
| |
| if (! bfd_elf64_add_dynamic_entry (info, DT_MIPS_GOTSYM, 0)) |
| return false; |
| |
| if ((bfd_get_section_by_name(dynobj, ".MIPS.options")) |
| && !bfd_elf64_add_dynamic_entry (info, DT_MIPS_OPTIONS, 0)) |
| return false; |
| |
| if (bfd_get_section_by_name (dynobj, ".msym") |
| && !bfd_elf64_add_dynamic_entry (info, DT_MIPS_MSYM, 0)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Finish up dynamic symbol handling. We set the contents of various |
| dynamic sections here. */ |
| |
| boolean |
| mips_elf64_finish_dynamic_symbol (output_bfd, info, h, sym) |
| bfd *output_bfd; |
| struct bfd_link_info *info; |
| struct elf_link_hash_entry *h; |
| Elf_Internal_Sym *sym; |
| { |
| bfd *dynobj; |
| bfd_vma gval; |
| asection *sgot; |
| asection *smsym; |
| struct mips_elf64_got_info *g; |
| const char *name; |
| struct mips_elf64_link_hash_entry *mh; |
| |
| dynobj = elf_hash_table (info)->dynobj; |
| gval = sym->st_value; |
| mh = (struct mips_elf64_link_hash_entry *) h; |
| |
| if (h->plt.offset != (bfd_vma) -1) |
| { |
| asection *s; |
| bfd_byte stub[MIPS_FUNCTION_STUB_SIZE]; |
| |
| /* This symbol has a stub. Set it up. */ |
| |
| BFD_ASSERT (h->dynindx != -1); |
| |
| s = bfd_get_section_by_name (dynobj, ".MIPS.stubs"); |
| BFD_ASSERT (s != NULL); |
| |
| /* FIXME: Can h->dynindex be more than 64K? */ |
| if (h->dynindx & 0xffff0000) |
| return false; |
| |
| /* Fill the stub. */ |
| bfd_put_32 (output_bfd, STUB_LW, stub); |
| bfd_put_32 (output_bfd, STUB_MOVE, stub + 4); |
| bfd_put_32 (output_bfd, STUB_JALR, stub + 8); |
| bfd_put_32 (output_bfd, STUB_LI16 + h->dynindx, stub + 12); |
| |
| BFD_ASSERT (h->plt.offset <= s->_raw_size); |
| memcpy (s->contents + h->plt.offset, stub, MIPS_FUNCTION_STUB_SIZE); |
| |
| /* Mark the symbol as undefined. plt.offset != -1 occurs |
| only for the referenced symbol. */ |
| sym->st_shndx = SHN_UNDEF; |
| |
| /* The run-time linker uses the st_value field of the symbol |
| to reset the global offset table entry for this external |
| to its stub address when unlinking a shared object. */ |
| gval = s->output_section->vma + s->output_offset + h->plt.offset; |
| sym->st_value = gval; |
| } |
| |
| BFD_ASSERT (h->dynindx != -1 |
| || (h->elf_link_hash_flags & ELF_LINK_FORCED_LOCAL) != 0); |
| |
| sgot = bfd_get_section_by_name (dynobj, ".got"); |
| BFD_ASSERT (sgot != NULL); |
| BFD_ASSERT (elf_section_data (sgot) != NULL); |
| g = (struct mips_elf64_got_info *) elf_section_data (sgot)->tdata; |
| BFD_ASSERT (g != NULL); |
| |
| /* Run through the global symbol table, creating GOT entries for all |
| the symbols that need them. */ |
| if (g->global_gotsym != NULL |
| && h->dynindx >= g->global_gotsym->dynindx) |
| { |
| bfd_vma offset; |
| bfd_vma value; |
| |
| if (sym->st_value) |
| value = sym->st_value; |
| else |
| { |
| /* For an entity defined in a shared object, this will be |
| NULL. (For functions in shared objects for |
| which we have created stubs, ST_VALUE will be non-NULL. |
| That's because such the functions are now no longer defined |
| in a shared object.) */ |
| |
| if (info->shared && h->root.type == bfd_link_hash_undefined) |
| value = 0; |
| else |
| value = h->root.u.def.value; |
| } |
| offset = mips_elf64_global_got_index (dynobj, h); |
| bfd_put_64 (output_bfd, value, sgot->contents + offset); |
| } |
| |
| /* Create a .msym entry, if appropriate. */ |
| smsym = bfd_get_section_by_name (dynobj, ".msym"); |
| if (smsym) |
| { |
| Elf32_Internal_Msym msym; |
| |
| msym.ms_hash_value = bfd_elf_hash (h->root.root.string); |
| /* It is undocumented what the `1' indicates, but IRIX6 uses |
| this value. */ |
| msym.ms_info = ELF32_MS_INFO (mh->min_dyn_reloc_index, 1); |
| mips_elf64_swap_msym_out |
| (dynobj, &msym, |
| ((Elf32_External_Msym *) smsym->contents) + h->dynindx); |
| } |
| |
| /* Mark _DYNAMIC and _GLOBAL_OFFSET_TABLE_ as absolute. */ |
| name = h->root.root.string; |
| if (strcmp (name, "_DYNAMIC") == 0 |
| || strcmp (name, "_GLOBAL_OFFSET_TABLE_") == 0) |
| sym->st_shndx = SHN_ABS; |
| else if (strcmp (name, "_DYNAMIC_LINK") == 0 |
| || strcmp (name, "_DYNAMIC_LINKING") == 0) |
| { |
| sym->st_shndx = SHN_ABS; |
| sym->st_info = ELF_ST_INFO (STB_GLOBAL, STT_SECTION); |
| sym->st_value = 1; |
| } |
| else if (sym->st_shndx != SHN_UNDEF && sym->st_shndx != SHN_ABS) |
| { |
| if (h->type == STT_FUNC) |
| sym->st_shndx = SHN_MIPS_TEXT; |
| else if (h->type == STT_OBJECT) |
| sym->st_shndx = SHN_MIPS_DATA; |
| } |
| |
| /* Handle the IRIX6-specific symbols. */ |
| |
| { |
| /* The linker script takes care of providing names and values for |
| these, but we must place them into the right sections. */ |
| static const char* const text_section_symbols[] = { |
| "_ftext", |
| "_etext", |
| "__dso_displacement", |
| "__elf_header", |
| "__program_header_table", |
| NULL |
| }; |
| |
| static const char* const data_section_symbols[] = { |
| "_fdata", |
| "_edata", |
| "_end", |
| "_fbss", |
| NULL |
| }; |
| |
| const char* const *p; |
| int i; |
| |
| for (i = 0; i < 2; ++i) |
| for (p = (i == 0) ? text_section_symbols : data_section_symbols; |
| *p; |
| ++p) |
| if (strcmp (*p, name) == 0) |
| { |
| /* All of these symbols are given type STT_SECTION by the |
| IRIX6 linker. */ |
| sym->st_info = ELF_ST_INFO (STB_GLOBAL, STT_SECTION); |
| |
| /* The IRIX linker puts these symbols in special sections. */ |
| if (i == 0) |
| sym->st_shndx = SHN_MIPS_TEXT; |
| else |
| sym->st_shndx = SHN_MIPS_DATA; |
| |
| break; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* Finish up the dynamic sections. */ |
| |
| boolean |
| mips_elf64_finish_dynamic_sections (output_bfd, info) |
| bfd *output_bfd; |
| struct bfd_link_info *info; |
| { |
| bfd *dynobj; |
| asection *sdyn; |
| asection *sgot; |
| struct mips_elf64_got_info *g; |
| |
| dynobj = elf_hash_table (info)->dynobj; |
| |
| sdyn = bfd_get_section_by_name (dynobj, ".dynamic"); |
| |
| sgot = bfd_get_section_by_name (dynobj, ".got"); |
| if (sgot == NULL) |
| g = NULL; |
| else |
| { |
| BFD_ASSERT (elf_section_data (sgot) != NULL); |
| g = (struct mips_elf64_got_info *) elf_section_data (sgot)->tdata; |
| BFD_ASSERT (g != NULL); |
| } |
| |
| if (elf_hash_table (info)->dynamic_sections_created) |
| { |
| bfd_byte *b; |
| |
| BFD_ASSERT (sdyn != NULL); |
| BFD_ASSERT (g != NULL); |
| |
| for (b = sdyn->contents; |
| b < sdyn->contents + sdyn->_raw_size; |
| b += get_elf_backend_data (dynobj)->s->sizeof_dyn) |
| { |
| Elf_Internal_Dyn dyn; |
| const char *name; |
| size_t elemsize; |
| asection *s; |
| boolean swap_out_p; |
| |
| /* Read in the current dynamic entry. */ |
| (*get_elf_backend_data (dynobj)->s->swap_dyn_in) (dynobj, b, &dyn); |
| |
| /* Assume that we're going to modify it and write it out. */ |
| swap_out_p = true; |
| |
| switch (dyn.d_tag) |
| { |
| case DT_RELENT: |
| s = bfd_get_section_by_name(dynobj, "rel.dyn"); |
| BFD_ASSERT (s != NULL); |
| dyn.d_un.d_val = get_elf_backend_data (dynobj)->s->sizeof_rel; |
| break; |
| |
| case DT_STRSZ: |
| /* Rewrite DT_STRSZ. */ |
| dyn.d_un.d_val = |
| _bfd_elf_strtab_size (elf_hash_table (info)->dynstr); |
| break; |
| |
| case DT_PLTGOT: |
| name = ".got"; |
| goto get_vma; |
| case DT_MIPS_CONFLICT: |
| name = ".conflict"; |
| goto get_vma; |
| case DT_MIPS_LIBLIST: |
| name = ".liblist"; |
| get_vma: |
| s = bfd_get_section_by_name (output_bfd, name); |
| BFD_ASSERT (s != NULL); |
| dyn.d_un.d_ptr = s->vma; |
| break; |
| |
| case DT_MIPS_RLD_VERSION: |
| dyn.d_un.d_val = 1; /* XXX */ |
| break; |
| |
| case DT_MIPS_FLAGS: |
| dyn.d_un.d_val = RHF_NOTPOT; /* XXX */ |
| break; |
| |
| case DT_MIPS_CONFLICTNO: |
| name = ".conflict"; |
| elemsize = sizeof (Elf32_Conflict); |
| goto set_elemno; |
| |
| case DT_MIPS_LIBLISTNO: |
| name = ".liblist"; |
| elemsize = sizeof (Elf32_Lib); |
| set_elemno: |
| s = bfd_get_section_by_name (output_bfd, name); |
| if (s != NULL) |
| { |
| if (s->_cooked_size != 0) |
| dyn.d_un.d_val = s->_cooked_size / elemsize; |
| else |
| dyn.d_un.d_val = s->_raw_size / elemsize; |
| } |
| else |
| dyn.d_un.d_val = 0; |
| break; |
| |
| case DT_MIPS_TIME_STAMP: |
| time ((time_t *) &dyn.d_un.d_val); |
| break; |
| |
| case DT_MIPS_ICHECKSUM: |
| /* XXX FIXME: */ |
| swap_out_p = false; |
| break; |
| |
| case DT_MIPS_IVERSION: |
| /* XXX FIXME: */ |
| swap_out_p = false; |
| break; |
| |
| case DT_MIPS_BASE_ADDRESS: |
| s = output_bfd->sections; |
| BFD_ASSERT (s != NULL); |
| dyn.d_un.d_ptr = s->vma & ~(0xffff); |
| break; |
| |
| case DT_MIPS_LOCAL_GOTNO: |
| dyn.d_un.d_val = g->local_gotno; |
| break; |
| |
| case DT_MIPS_UNREFEXTNO: |
| /* The index into the dynamic symbol table which is the |
| entry of the first external symbol that is not |
| referenced within the same object. */ |
| dyn.d_un.d_val = bfd_count_sections (output_bfd) + 1; |
| break; |
| |
| case DT_MIPS_GOTSYM: |
| if (g->global_gotsym) |
| { |
| dyn.d_un.d_val = g->global_gotsym->dynindx; |
| break; |
| } |
| /* In case if we don't have global got symbols we default |
| to setting DT_MIPS_GOTSYM to the same value as |
| DT_MIPS_SYMTABNO, so we just fall through. */ |
| |
| case DT_MIPS_SYMTABNO: |
| name = ".dynsym"; |
| elemsize = get_elf_backend_data (output_bfd)->s->sizeof_sym; |
| s = bfd_get_section_by_name (output_bfd, name); |
| BFD_ASSERT (s != NULL); |
| |
| if (s->_cooked_size != 0) |
| dyn.d_un.d_val = s->_cooked_size / elemsize; |
| else |
| dyn.d_un.d_val = s->_raw_size / elemsize; |
| break; |
| |
| case DT_MIPS_HIPAGENO: |
| dyn.d_un.d_val = g->local_gotno - MIPS_RESERVED_GOTNO; |
| break; |
| |
| case DT_MIPS_OPTIONS: |
| s = bfd_get_section_by_name(output_bfd, ".MIPS.options"); |
| dyn.d_un.d_ptr = s->vma; |
| break; |
| |
| case DT_MIPS_MSYM: |
| s = bfd_get_section_by_name(output_bfd, ".msym"); |
| dyn.d_un.d_ptr = s->vma; |
| break; |
| |
| default: |
| swap_out_p = false; |
| break; |
| } |
| |
| if (swap_out_p) |
| (*get_elf_backend_data (dynobj)->s->swap_dyn_out) |
| (dynobj, &dyn, b); |
| } |
| } |
| |
| /* The first entry of the global offset table will be filled at |
| runtime. The second entry will be used by some runtime loaders. |
| This isn't the case of Irix rld. */ |
| if (sgot != NULL && sgot->_raw_size > 0) |
| { |
| bfd_put_64 (output_bfd, (bfd_vma) 0, sgot->contents); |
| bfd_put_64 (output_bfd, (bfd_vma) 0x80000000, sgot->contents + 8); |
| } |
| |
| if (sgot != NULL) |
| elf_section_data (sgot->output_section)->this_hdr.sh_entsize = 8; |
| |
| { |
| asection *smsym; |
| asection *s; |
| |
| /* ??? The section symbols for the output sections were set up in |
| _bfd_elf_final_link. SGI sets the STT_NOTYPE attribute for these |
| symbols. Should we do so? */ |
| |
| smsym = bfd_get_section_by_name (dynobj, ".msym"); |
| if (smsym != NULL) |
| { |
| Elf32_Internal_Msym msym; |
| |
| msym.ms_hash_value = 0; |
| msym.ms_info = ELF32_MS_INFO (0, 1); |
| |
| for (s = output_bfd->sections; s != NULL; s = s->next) |
| { |
| long dynindx = elf_section_data (s)->dynindx; |
| |
| mips_elf64_swap_msym_out |
| (output_bfd, &msym, |
| (((Elf32_External_Msym *) smsym->contents) |
| + dynindx)); |
| } |
| } |
| |
| /* Clean up a first relocation in .rel.dyn. */ |
| s = bfd_get_section_by_name (dynobj, "rel.dyn"); |
| if (s != NULL && s->_raw_size > 0) |
| memset (s->contents, 0, get_elf_backend_data (dynobj)->s->sizeof_rel); |
| } |
| |
| return true; |
| } |
| |
| /* Return the section that should be marked against GC for a given |
| relocation. */ |
| |
| asection * |
| mips_elf64_gc_mark_hook (abfd, info, rel, h, sym) |
| bfd *abfd; |
| struct bfd_link_info *info ATTRIBUTE_UNUSED; |
| Elf_Internal_Rela *rel; |
| struct elf_link_hash_entry *h; |
| Elf_Internal_Sym *sym; |
| { |
| if (h != NULL) |
| { |
| switch (ELF64_R_TYPE (rel->r_info)) |
| { |
| case R_MIPS_GNU_VTINHERIT: |
| case R_MIPS_GNU_VTENTRY: |
| break; |
| |
| default: |
| switch (h->root.type) |
| { |
| case bfd_link_hash_defined: |
| case bfd_link_hash_defweak: |
| return h->root.u.def.section; |
| |
| case bfd_link_hash_common: |
| return h->root.u.c.p->section; |
| |
| default: |
| break; |
| } |
| } |
| } |
| else |
| { |
| return bfd_section_from_elf_index (abfd, sym->st_shndx); |
| } |
| |
| return NULL; |
| } |
| |
| /* Update the got entry reference counts for the section being removed. */ |
| |
| boolean |
| mips_elf64_gc_sweep_hook (abfd, info, sec, relocs) |
| bfd *abfd ATTRIBUTE_UNUSED; |
| struct bfd_link_info *info ATTRIBUTE_UNUSED; |
| asection *sec ATTRIBUTE_UNUSED; |
| const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED; |
| { |
| #if 0 |
| Elf_Internal_Shdr *symtab_hdr; |
| struct elf_link_hash_entry **sym_hashes; |
| bfd_signed_vma *local_got_refcounts; |
| const Elf_Internal_Rela *rel, *relend; |
| unsigned long r_symndx; |
| struct elf_link_hash_entry *h; |
| |
| symtab_hdr = &elf_tdata (abfd)->symtab_hdr; |
| sym_hashes = elf_sym_hashes (abfd); |
| local_got_refcounts = elf_local_got_refcounts (abfd); |
| |
| relend = relocs + sec->reloc_count; |
| for (rel = relocs; rel < relend; rel++) |
| switch (ELF64_R_TYPE (rel->r_info)) |
| { |
| case R_MIPS_GOT16: |
| case R_MIPS_CALL16: |
| case R_MIPS_CALL_HI16: |
| case R_MIPS_CALL_LO16: |
| case R_MIPS_GOT_HI16: |
| case R_MIPS_GOT_LO16: |
| /* ??? It would seem that the existing MIPS code does no sort |
| of reference counting or whatnot on its GOT and PLT entries, |
| so it is not possible to garbage collect them at this time. */ |
| break; |
| |
| default: |
| break; |
| } |
| #endif |
| |
| return true; |
| } |
| |
| /* Create the .got section to hold the global offset table. */ |
| |
| static boolean |
| mips_elf64_create_got_section (abfd, info) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| { |
| flagword flags; |
| register asection *s; |
| struct elf_link_hash_entry *h; |
| struct mips_elf64_got_info *g; |
| |
| /* This function may be called more than once. */ |
| if (bfd_get_section_by_name (abfd, ".got")) |
| return true; |
| |
| flags = (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY |
| | SEC_LINKER_CREATED); |
| |
| s = bfd_make_section (abfd, ".got"); |
| if (s == NULL |
| || ! bfd_set_section_flags (abfd, s, flags) |
| || ! bfd_set_section_alignment (abfd, s, 4)) |
| return false; |
| |
| /* Define the symbol _GLOBAL_OFFSET_TABLE_. We don't do this in the |
| linker script because we don't want to define the symbol if we |
| are not creating a global offset table. */ |
| h = NULL; |
| if (! (_bfd_generic_link_add_one_symbol |
| (info, abfd, "_GLOBAL_OFFSET_TABLE_", BSF_GLOBAL, s, |
| (bfd_vma) 0, (const char *) NULL, false, |
| get_elf_backend_data (abfd)->collect, |
| (struct bfd_link_hash_entry **) &h))) |
| return false; |
| h->elf_link_hash_flags &=~ ELF_LINK_NON_ELF; |
| h->elf_link_hash_flags |= ELF_LINK_HASH_DEF_REGULAR; |
| h->type = STT_OBJECT; |
| |
| if (info->shared |
| && ! bfd_elf64_link_record_dynamic_symbol (info, h)) |
| return false; |
| |
| /* The first several global offset table entries are reserved. */ |
| s->_raw_size = MIPS_RESERVED_GOTNO * (get_elf_backend_data (abfd)->s->arch_size / 8); |
| |
| g = (struct mips_elf64_got_info *) bfd_alloc (abfd, |
| sizeof (struct mips_elf64_got_info)); |
| if (g == NULL) |
| return false; |
| g->global_gotsym = NULL; |
| g->local_gotno = MIPS_RESERVED_GOTNO; |
| g->assigned_gotno = MIPS_RESERVED_GOTNO; |
| if (elf_section_data (s) == NULL) |
| { |
| s->used_by_bfd = |
| (PTR) bfd_zalloc (abfd, sizeof (struct bfd_elf_section_data)); |
| if (elf_section_data (s) == NULL) |
| return false; |
| } |
| elf_section_data (s)->tdata = (PTR) g; |
| elf_section_data (s)->this_hdr.sh_flags |
| |= SHF_ALLOC | SHF_WRITE | SHF_MIPS_GPREL; |
| |
| return true; |
| } |
| |
| /* If H is a symbol that needs a global GOT entry, but has a dynamic |
| symbol table index lower than any we've seen to date, record it for |
| posterity. */ |
| |
| static boolean |
| mips_elf64_record_global_got_symbol (h, info, g) |
| struct elf_link_hash_entry *h; |
| struct bfd_link_info *info; |
| struct mips_elf64_got_info *g ATTRIBUTE_UNUSED; |
| { |
| /* A global symbol in the GOT must also be in the dynamic symbol |
| table. */ |
| if (h->dynindx == -1 |
| && !bfd_elf64_link_record_dynamic_symbol (info, h)) |
| return false; |
| |
| /* If we've already marked this entry as needing GOT space, we don't |
| need to do it again. */ |
| if (h->got.offset != (bfd_vma) - 1) |
| return true; |
| |
| /* By setting this to a value other than -1, we are indicating that |
| there needs to be a GOT entry for H. Avoid using zero, as the |
| generic ELF copy_indirect_symbol tests for <= 0. */ |
| h->got.offset = 1; |
| |
| return true; |
| } |
| |
| /* Returns the .msym section for ABFD, creating it if it does not |
| already exist. Returns NULL to indicate error. */ |
| |
| static asection * |
| mips_elf64_create_msym_section (abfd) |
| bfd *abfd; |
| { |
| asection *s; |
| |
| s = bfd_get_section_by_name (abfd, ".msym"); |
| if (!s) |
| { |
| s = bfd_make_section (abfd, ".msym"); |
| if (!s |
| || !bfd_set_section_flags (abfd, s, |
| SEC_ALLOC |
| | SEC_LOAD |
| | SEC_HAS_CONTENTS |
| | SEC_LINKER_CREATED |
| | SEC_READONLY) |
| || !bfd_set_section_alignment (abfd, s, 3)) |
| return NULL; |
| } |
| |
| return s; |
| } |
| |
| /* Add room for N relocations to the .rel.dyn section in ABFD. */ |
| |
| static void |
| mips_elf64_allocate_dynamic_relocations (abfd, n) |
| bfd *abfd; |
| unsigned int n; |
| { |
| asection *s; |
| |
| s = bfd_get_section_by_name (abfd, ".rel.dyn"); |
| BFD_ASSERT (s != NULL); |
| |
| if (s->_raw_size == 0) |
| { |
| /* Make room for a null element. */ |
| s->_raw_size += get_elf_backend_data (abfd)->s->sizeof_rel; |
| ++s->reloc_count; |
| } |
| s->_raw_size += n * get_elf_backend_data (abfd)->s->sizeof_rel; |
| } |
| |
| /* Look through the relocs for a section during the first phase, and |
| allocate space in the global offset table. */ |
| |
| boolean |
| mips_elf64_check_relocs (abfd, info, sec, relocs) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| asection *sec; |
| const Elf_Internal_Rela *relocs; |
| { |
| const char *name; |
| bfd *dynobj; |
| Elf_Internal_Shdr *symtab_hdr; |
| struct elf_link_hash_entry **sym_hashes; |
| struct mips_elf64_got_info *g; |
| size_t extsymoff; |
| const Elf_Internal_Rela *rel; |
| const Elf_Internal_Rela *rel_end; |
| asection *sgot; |
| asection *sreloc; |
| struct elf_backend_data *bed; |
| |
| if (info->relocateable) |
| return true; |
| |
| dynobj = elf_hash_table (info)->dynobj; |
| symtab_hdr = &elf_tdata (abfd)->symtab_hdr; |
| sym_hashes = elf_sym_hashes (abfd); |
| extsymoff = (elf_bad_symtab (abfd)) ? 0 : symtab_hdr->sh_info; |
| |
| /* Check for the mips16 stub sections. */ |
| |
| name = bfd_get_section_name (abfd, sec); |
| if (strncmp (name, FN_STUB, sizeof FN_STUB - 1) == 0) |
| { |
| unsigned long r_symndx; |
| |
| /* Look at the relocation information to figure out which symbol |
| this is for. */ |
| |
| r_symndx = ELF64_R_SYM (relocs->r_info); |
| |
| if (r_symndx < extsymoff |
| || sym_hashes[r_symndx - extsymoff] == NULL) |
| { |
| asection *o; |
| |
| /* This stub is for a local symbol. This stub will only be |
| needed if there is some relocation in this BFD, other |
| than a 16 bit function call, which refers to this symbol. */ |
| for (o = abfd->sections; o != NULL; o = o->next) |
| { |
| Elf_Internal_Rela *sec_relocs; |
| const Elf_Internal_Rela *r, *rend; |
| |
| /* We can ignore stub sections when looking for relocs. */ |
| if ((o->flags & SEC_RELOC) == 0 |
| || o->reloc_count == 0 |
| || strncmp (bfd_get_section_name (abfd, o), FN_STUB, |
| sizeof FN_STUB - 1) == 0 |
| || strncmp (bfd_get_section_name (abfd, o), CALL_STUB, |
| sizeof CALL_STUB - 1) == 0 |
| || strncmp (bfd_get_section_name (abfd, o), CALL_FP_STUB, |
| sizeof CALL_FP_STUB - 1) == 0) |
| continue; |
| |
| sec_relocs = (_bfd_elf64_link_read_relocs |
| (abfd, o, (PTR) NULL, |
| (Elf_Internal_Rela *) NULL, |
| info->keep_memory)); |
| if (sec_relocs == NULL) |
| return false; |
| |
| rend = sec_relocs + o->reloc_count; |
| for (r = sec_relocs; r < rend; r++) |
| if (ELF64_R_SYM (r->r_info) == r_symndx |
| && ELF64_R_TYPE (r->r_info) != R_MIPS16_26) |
| break; |
| |
| if (! info->keep_memory) |
| free (sec_relocs); |
| |
| if (r < rend) |
| break; |
| } |
| |
| if (o == NULL) |
| { |
| /* There is no non-call reloc for this stub, so we do |
| not need it. Since this function is called before |
| the linker maps input sections to output sections, we |
| can easily discard it by setting the SEC_EXCLUDE |
| flag. */ |
| sec->flags |= SEC_EXCLUDE; |
| return true; |
| } |
| |
| /* Record this stub in an array of local symbol stubs for |
| this BFD. */ |
| if (elf_tdata (abfd)->local_stubs == NULL) |
| { |
| unsigned long symcount; |
| asection **n; |
| bfd_size_type amt; |
| |
| if (elf_bad_symtab (abfd)) |
| symcount = NUM_SHDR_ENTRIES (symtab_hdr); |
| else |
| symcount = symtab_hdr->sh_info; |
| amt = symcount * sizeof (asection *); |
| n = (asection **) bfd_zalloc (abfd, amt); |
| if (n == NULL) |
| return false; |
| elf_tdata (abfd)->local_stubs = n; |
| } |
| |
| elf_tdata (abfd)->local_stubs[r_symndx] = sec; |
| |
| /* We don't need to set mips16_stubs_seen in this case. |
| That flag is used to see whether we need to look through |
| the global symbol table for stubs. We don't need to set |
| it here, because we just have a local stub. */ |
| } |
| else |
| { |
| struct mips_elf64_link_hash_entry *h; |
| |
| h = ((struct mips_elf64_link_hash_entry *) |
| sym_hashes[r_symndx - extsymoff]); |
| |
| /* H is the symbol this stub is for. */ |
| |
| h->fn_stub = sec; |
| mips_elf64_hash_table (info)->mips16_stubs_seen = true; |
| } |
| } |
| else if (strncmp (name, CALL_STUB, sizeof CALL_STUB - 1) == 0 |
| || strncmp (name, CALL_FP_STUB, sizeof CALL_FP_STUB - 1) == 0) |
| { |
| unsigned long r_symndx; |
| struct mips_elf64_link_hash_entry *h; |
| asection **loc; |
| |
| /* Look at the relocation information to figure out which symbol |
| this is for. */ |
| |
| r_symndx = ELF64_R_SYM (relocs->r_info); |
| |
| if (r_symndx < extsymoff |
| || sym_hashes[r_symndx - extsymoff] == NULL) |
| { |
| /* This stub was actually built for a static symbol defined |
| in the same file. We assume that all static symbols in |
| mips16 code are themselves mips16, so we can simply |
| discard this stub. Since this function is called before |
| the linker maps input sections to output sections, we can |
| easily discard it by setting the SEC_EXCLUDE flag. */ |
| sec->flags |= SEC_EXCLUDE; |
| return true; |
| } |
| |
| h = ((struct mips_elf64_link_hash_entry *) |
| sym_hashes[r_symndx - extsymoff]); |
| |
| /* H is the symbol this stub is for. */ |
| |
| if (strncmp (name, CALL_FP_STUB, sizeof CALL_FP_STUB - 1) == 0) |
| loc = &h->call_fp_stub; |
| else |
| loc = &h->call_stub; |
| |
| /* If we already have an appropriate stub for this function, we |
| don't need another one, so we can discard this one. Since |
| this function is called before the linker maps input sections |
| to output sections, we can easily discard it by setting the |
| SEC_EXCLUDE flag. We can also discard this section if we |
| happen to already know that this is a mips16 function; it is |
| not necessary to check this here, as it is checked later, but |
| it is slightly faster to check now. */ |
| if (*loc != NULL || h->root.other == STO_MIPS16) |
| { |
| sec->flags |= SEC_EXCLUDE; |
| return true; |
| } |
| |
| *loc = sec; |
| mips_elf64_hash_table (info)->mips16_stubs_seen = true; |
| } |
| |
| if (dynobj == NULL) |
| { |
| sgot = NULL; |
| g = NULL; |
| } |
| else |
| { |
| sgot = bfd_get_section_by_name (dynobj, ".got"); |
| if (sgot == NULL) |
| g = NULL; |
| else |
| { |
| BFD_ASSERT (elf_section_data (sgot) != NULL); |
| g = (struct mips_elf64_got_info *) elf_section_data (sgot)->tdata; |
| BFD_ASSERT (g != NULL); |
| } |
| } |
| |
| sreloc = NULL; |
| bed = get_elf_backend_data (abfd); |
| rel_end = relocs + sec->reloc_count * bed->s->int_rels_per_ext_rel; |
| for (rel = relocs; rel < rel_end; ++rel) |
| { |
| unsigned long r_symndx; |
| int r_type; |
| struct elf_link_hash_entry *h; |
| |
| r_symndx = ELF64_R_SYM (rel->r_info); |
| r_type = ELF64_MIPS_R_TYPE (rel->r_info); |
| |
| if (r_symndx < extsymoff) |
| h = NULL; |
| else if (r_symndx >= extsymoff + NUM_SHDR_ENTRIES (symtab_hdr)) |
| { |
| (*_bfd_error_handler) |
| (_("%s: Malformed reloc detected for section %s"), |
| bfd_archive_filename (abfd), name); |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| else |
| { |
| h = sym_hashes[r_symndx - extsymoff]; |
| |
| /* This may be an indirect symbol created because of a version. */ |
| if (h != NULL) |
| { |
| while (h->root.type == bfd_link_hash_indirect) |
| h = (struct elf_link_hash_entry *) h->root.u.i.link; |
| } |
| } |
| |
| /* Some relocs require a global offset table. */ |
| if (dynobj == NULL || sgot == NULL) |
| { |
| switch (r_type) |
| { |
| case R_MIPS_GOT16: |
| case R_MIPS_CALL16: |
| case R_MIPS_CALL_HI16: |
| case R_MIPS_CALL_LO16: |
| case R_MIPS_GOT_HI16: |
| case R_MIPS_GOT_LO16: |
| case R_MIPS_GOT_PAGE: |
| case R_MIPS_GOT_OFST: |
| case R_MIPS_GOT_DISP: |
| if (dynobj == NULL) |
| elf_hash_table (info)->dynobj = dynobj = abfd; |
| if (! mips_elf64_create_got_section (dynobj, info)) |
| return false; |
| g = _mips_elf64_got_info (dynobj, &sgot); |
| break; |
| |
| case R_MIPS_32: |
| case R_MIPS_REL32: |
| case R_MIPS_64: |
| if (dynobj == NULL |
| && (info->shared || h != NULL) |
| && (sec->flags & SEC_ALLOC) != 0) |
| elf_hash_table (info)->dynobj = dynobj = abfd; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| if (!h && (r_type == R_MIPS_CALL_LO16 |
| || r_type == R_MIPS_GOT_LO16 |
| || r_type == R_MIPS_GOT_DISP)) |
| { |
| /* We may need a local GOT entry for this relocation. We |
| don't count R_MIPS_GOT_PAGE because we can estimate the |
| maximum number of pages needed by looking at the size of |
| the segment. Similar comments apply to R_MIPS_GOT16 and |
| R_MIPS_CALL16. We don't count R_MIPS_GOT_HI16, or |
| R_MIPS_CALL_HI16 because these are always followed by an |
| R_MIPS_GOT_LO16 or R_MIPS_CALL_LO16. |
| |
| This estimation is very conservative since we can merge |
| duplicate entries in the GOT. In order to be less |
| conservative, we could actually build the GOT here, |
| rather than in relocate_section. */ |
| g->local_gotno++; |
| sgot->_raw_size += get_elf_backend_data (dynobj)->s->arch_size / 8; |
| } |
| |
| switch (r_type) |
| { |
| case R_MIPS_CALL16: |
| if (h == NULL) |
| { |
| (*_bfd_error_handler) |
| (_("%s: CALL16 reloc at 0x%lx not against global symbol"), |
| bfd_archive_filename (abfd), (unsigned long) rel->r_offset); |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| /* Fall through. */ |
| |
| case R_MIPS_CALL_HI16: |
| case R_MIPS_CALL_LO16: |
| if (h != NULL) |
| { |
| /* This symbol requires a global offset table entry. */ |
| if (!mips_elf64_record_global_got_symbol (h, info, g)) |
| return false; |
| |
| /* We need a stub, not a plt entry for the undefined |
| function. But we record it as if it needs plt. See |
| elf_adjust_dynamic_symbol in elflink.h. */ |
| h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_PLT; |
| h->type = STT_FUNC; |
| } |
| break; |
| |
| case R_MIPS_GOT16: |
| case R_MIPS_GOT_HI16: |
| case R_MIPS_GOT_LO16: |
| case R_MIPS_GOT_DISP: |
| /* This symbol requires a global offset table entry. */ |
| if (h && !mips_elf64_record_global_got_symbol (h, info, g)) |
| return false; |
| break; |
| |
| case R_MIPS_32: |
| case R_MIPS_REL32: |
| case R_MIPS_64: |
| if ((info->shared || h != NULL) |
| && (sec->flags & SEC_ALLOC) != 0) |
| { |
| if (sreloc == NULL) |
| { |
| const char *name = ".rel.dyn"; |
| |
| sreloc = bfd_get_section_by_name (dynobj, name); |
| if (sreloc == NULL) |
| { |
| sreloc = bfd_make_section (dynobj, name); |
| if (sreloc == NULL |
| || ! bfd_set_section_flags (dynobj, sreloc, |
| (SEC_ALLOC |
| | SEC_LOAD |
| | SEC_HAS_CONTENTS |
| | SEC_IN_MEMORY |
| | SEC_LINKER_CREATED |
| | SEC_READONLY)) |
| || ! bfd_set_section_alignment (dynobj, sreloc, |
| 4)) |
| return false; |
| } |
| } |
| #define MIPS_READONLY_SECTION (SEC_ALLOC | SEC_LOAD | SEC_READONLY) |
| if (info->shared) |
| { |
| /* When creating a shared object, we must copy these |
| reloc types into the output file as R_MIPS_REL32 |
| relocs. We make room for this reloc in the |
| .rel.dyn reloc section. */ |
| mips_elf64_allocate_dynamic_relocations (dynobj, 1); |
| if ((sec->flags & MIPS_READONLY_SECTION) |
| == MIPS_READONLY_SECTION) |
| /* We tell the dynamic linker that there are |
| relocations against the text segment. */ |
| info->flags |= DF_TEXTREL; |
| } |
| else |
| { |
| struct mips_elf64_link_hash_entry *hmips; |
| |
| /* We only need to copy this reloc if the symbol is |
| defined in a dynamic object. */ |
| hmips = (struct mips_elf64_link_hash_entry *) h; |
| ++hmips->possibly_dynamic_relocs; |
| if ((sec->flags & MIPS_READONLY_SECTION) |
| == MIPS_READONLY_SECTION) |
| /* We need it to tell the dynamic linker if there |
| are relocations against the text segment. */ |
| hmips->readonly_reloc = true; |
| } |
| |
| /* Even though we don't directly need a GOT entry for |
| this symbol, a symbol must have a dynamic symbol |
| table index greater that DT_MIPS_GOTSYM if there are |
| dynamic relocations against it. */ |
| if (h != NULL |
| && !mips_elf64_record_global_got_symbol (h, info, g)) |
| return false; |
| } |
| break; |
| |
| case R_MIPS_26: |
| case R_MIPS_GPREL16: |
| case R_MIPS_LITERAL: |
| case R_MIPS_GPREL32: |
| break; |
| |
| /* This relocation describes the C++ object vtable hierarchy. |
| Reconstruct it for later use during GC. */ |
| case R_MIPS_GNU_VTINHERIT: |
| if (!_bfd_elf64_gc_record_vtinherit (abfd, sec, h, rel->r_offset)) |
| return false; |
| break; |
| |
| /* This relocation describes which C++ vtable entries are actually |
| used. Record for later use during GC. */ |
| case R_MIPS_GNU_VTENTRY: |
| if (!_bfd_elf64_gc_record_vtentry (abfd, sec, h, rel->r_offset)) |
| return false; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* Structure used to pass information to mips_elf64_output_extsym. */ |
| |
| struct extsym_info |
| { |
| bfd *abfd; |
| struct bfd_link_info *info; |
| struct ecoff_debug_info *debug; |
| const struct ecoff_debug_swap *swap; |
| boolean failed; |
| }; |
| |
| /* This routine is used to write out ECOFF debugging external symbol |
| information. It is called via mips_elf64_link_hash_traverse. The |
| ECOFF external symbol information must match the ELF external |
| symbol information. Unfortunately, at this point we don't know |
| whether a symbol is required by reloc information, so the two |
| tables may wind up being different. We must sort out the external |
| symbol information before we can set the final size of the .mdebug |
| section, and we must set the size of the .mdebug section before we |
| can relocate any sections, and we can't know which symbols are |
| required by relocation until we relocate the sections. |
| Fortunately, it is relatively unlikely that any symbol will be |
| stripped but required by a reloc. In particular, it can not happen |
| when generating a final executable. */ |
| |
| static boolean |
| mips_elf64_output_extsym (h, data) |
| struct mips_elf64_link_hash_entry *h; |
| PTR data; |
| { |
| struct extsym_info *einfo = (struct extsym_info *) data; |
| boolean strip; |
| asection *sec, *output_section; |
| |
| if (h->root.indx == -2) |
| strip = false; |
| else if (((h->root.elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) != 0 |
| || (h->root.elf_link_hash_flags & ELF_LINK_HASH_REF_DYNAMIC) != 0) |
| && (h->root.elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0 |
| && (h->root.elf_link_hash_flags & ELF_LINK_HASH_REF_REGULAR) == 0) |
| strip = true; |
| else if (einfo->info->strip == strip_all |
| || (einfo->info->strip == strip_some |
| && bfd_hash_lookup (einfo->info->keep_hash, |
| h->root.root.root.string, |
| false, false) == NULL)) |
| strip = true; |
| else |
| strip = false; |
| |
| if (strip) |
| return true; |
| |
| if (h->esym.ifd == -2) |
| { |
| h->esym.jmptbl = 0; |
| h->esym.cobol_main = 0; |
| h->esym.weakext = 0; |
| h->esym.reserved = 0; |
| h->esym.ifd = ifdNil; |
| h->esym.asym.value = 0; |
| h->esym.asym.st = stGlobal; |
| |
| if (h->root.root.type == bfd_link_hash_undefined |
| || h->root.root.type == bfd_link_hash_undefweak) |
| { |
| const char *name; |
| |
| /* Use undefined class. Also, set class and type for some |
| special symbols. */ |
| name = h->root.root.root.string; |
| h->esym.asym.sc = scUndefined; |
| } |
| else if (h->root.root.type != bfd_link_hash_defined |
| && h->root.root.type != bfd_link_hash_defweak) |
| h->esym.asym.sc = scAbs; |
| else |
| { |
| const char *name; |
| |
| sec = h->root.root.u.def.section; |
| output_section = sec->output_section; |
| |
| /* When making a shared library and symbol h is the one from |
| the another shared library, OUTPUT_SECTION may be null. */ |
| if (output_section == NULL) |
| h->esym.asym.sc = scUndefined; |
| else |
| { |
| name = bfd_section_name (output_section->owner, output_section); |
| |
| if (strcmp (name, ".text") == 0) |
| h->esym.asym.sc = scText; |
| else if (strcmp (name, ".data") == 0) |
| h->esym.asym.sc = scData; |
| else if (strcmp (name, ".sdata") == 0) |
| h->esym.asym.sc = scSData; |
| else if (strcmp (name, ".rodata") == 0 |
| || strcmp (name, ".rdata") == 0) |
| h->esym.asym.sc = scRData; |
| else if (strcmp (name, ".bss") == 0) |
| h->esym.asym.sc = scBss; |
| else if (strcmp (name, ".sbss") == 0) |
| h->esym.asym.sc = scSBss; |
| else if (strcmp (name, ".init") == 0) |
| h->esym.asym.sc = scInit; |
| else if (strcmp (name, ".fini") == 0) |
| h->esym.asym.sc = scFini; |
| else |
| h->esym.asym.sc = scAbs; |
| } |
| } |
| |
| h->esym.asym.reserved = 0; |
| h->esym.asym.index = indexNil; |
| } |
| |
| if (h->root.root.type == bfd_link_hash_common) |
| h->esym.asym.value = h->root.root.u.c.size; |
| else if (h->root.root.type == bfd_link_hash_defined |
| || h->root.root.type == bfd_link_hash_defweak) |
| { |
| if (h->esym.asym.sc == scCommon) |
| h->esym.asym.sc = scBss; |
| else if (h->esym.asym.sc == scSCommon) |
| h->esym.asym.sc = scSBss; |
| |
| sec = h->root.root.u.def.section; |
| output_section = sec->output_section; |
| if (output_section != NULL) |
| h->esym.asym.value = (h->root.root.u.def.value |
| + sec->output_offset |
| + output_section->vma); |
| else |
| h->esym.asym.value = 0; |
| } |
| else if ((h->root.elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0) |
| { |
| struct mips_elf64_link_hash_entry *hd = h; |
| boolean no_fn_stub = h->no_fn_stub; |
| |
| while (hd->root.root.type == bfd_link_hash_indirect) |
| { |
| hd = (struct mips_elf64_link_hash_entry *)h->root.root.u.i.link; |
| no_fn_stub = no_fn_stub || hd->no_fn_stub; |
| } |
| |
| if (!no_fn_stub) |
| { |
| /* Set type and value for a symbol with a function stub. */ |
| h->esym.asym.st = stProc; |
| sec = hd->root.root.u.def.section; |
| if (sec == NULL) |
| h->esym.asym.value = 0; |
| else |
| { |
| output_section = sec->output_section; |
| if (output_section != NULL) |
| h->esym.asym.value = (hd->root.plt.offset |
| + sec->output_offset |
| + output_section->vma); |
| else |
| h->esym.asym.value = 0; |
| } |
| #if 0 /* FIXME? */ |
| h->esym.ifd = 0; |
| #endif |
| } |
| } |
| |
| if (! bfd_ecoff_debug_one_external (einfo->abfd, einfo->debug, einfo->swap, |
| h->root.root.root.string, |
| &h->esym)) |
| { |
| einfo->failed = true; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Swap an entry in a .gptab section. Note that these routines rely |
| on the equivalence of the two elements of the union. */ |
| |
| static void |
| mips_elf64_swap_gptab_in (abfd, ex, in) |
| bfd *abfd; |
| const Elf32_External_gptab *ex; |
| Elf32_gptab *in; |
| { |
| in->gt_entry.gt_g_value = H_GET_32 (abfd, ex->gt_entry.gt_g_value); |
| in->gt_entry.gt_bytes = H_GET_32 (abfd, ex->gt_entry.gt_bytes); |
| } |
| |
| static void |
| mips_elf64_swap_gptab_out (abfd, in, ex) |
| bfd *abfd; |
| const Elf32_gptab *in; |
| Elf32_External_gptab *ex; |
| { |
| H_PUT_32 (abfd, (bfd_vma) in->gt_entry.gt_g_value, |
| ex->gt_entry.gt_g_value); |
| H_PUT_32 (abfd, (bfd_vma) in->gt_entry.gt_bytes, |
| ex->gt_entry.gt_bytes); |
| } |
| |
| /* A comparison routine used to sort .gptab entries. */ |
| |
| static int |
| gptab_compare (p1, p2) |
| const PTR p1; |
| const PTR p2; |
| { |
| const Elf32_gptab *a1 = (const Elf32_gptab *) p1; |
| const Elf32_gptab *a2 = (const Elf32_gptab *) p2; |
| |
| return a1->gt_entry.gt_g_value - a2->gt_entry.gt_g_value; |
| } |
| |
| /* We need to use a special link routine to handle the .mdebug section. |
| We need to merge all instances of this section together, not write |
| them all out sequentially. */ |
| |
| boolean |
| mips_elf64_final_link (abfd, info) |
| bfd *abfd; |
| struct bfd_link_info *info; |
| { |
| asection **secpp; |
| asection *o; |
| struct bfd_link_order *p; |
| asection *mdebug_sec, *gptab_data_sec, *gptab_bss_sec; |
| struct ecoff_debug_info debug; |
| const struct ecoff_debug_swap *swap |
| = get_elf_backend_data (abfd)->elf_backend_ecoff_debug_swap; |
| HDRR *symhdr = &debug.symbolic_header; |
| PTR mdebug_handle = NULL; |
| asection *s; |
| EXTR esym; |
| unsigned int i; |
| static const char * const secname[] = |
| { ".text", ".init", ".fini", ".data", |
| ".rodata", ".sdata", ".sbss", ".bss" }; |
| static const int sc[] = { scText, scInit, scFini, scData, |
| scRData, scSData, scSBss, scBss }; |
| |
| /* If all the things we linked together were PIC, but we're |
| producing an executable (rather than a shared object), then the |
| resulting file is CPIC (i.e., it calls PIC code.) */ |
| if (!info->shared |
| && !info->relocateable |
| && elf_elfheader (abfd)->e_flags & EF_MIPS_PIC) |
| { |
| elf_elfheader (abfd)->e_flags &= ~EF_MIPS_PIC; |
| elf_elfheader (abfd)->e_flags |= EF_MIPS_CPIC; |
| } |
| |
| /* We'd carefully arranged the dynamic symbol indices, and then the |
| generic size_dynamic_sections renumbered them out from under us. |
| Rather than trying somehow to prevent the renumbering, just do |
| the sort again. */ |
| if (elf_hash_table (info)->dynamic_sections_created) |
| { |
| bfd *dynobj; |
| asection *got; |
| struct mips_elf64_got_info *g; |
| |
| /* When we resort, we must tell mips_elf64_sort_hash_table what |
| the lowest index it may use is. That's the number of section |
| symbols we're going to add. The generic ELF linker only |
| adds these symbols when building a shared object. Note that |
| we count the sections after (possibly) removing the .options |
| section above. */ |
| if (!mips_elf64_sort_hash_table (info, (info->shared |
| ? bfd_count_sections (abfd) + 1 |
| : 1))) |
| return false; |
| |
| /* Make sure we didn't grow the global .got region. */ |
| dynobj = elf_hash_table (info)->dynobj; |
| got = bfd_get_section_by_name (dynobj, ".got"); |
| g = (struct mips_elf64_got_info *) elf_section_data (got)->tdata; |
| |
| if (g->global_gotsym != NULL) |
| BFD_ASSERT ((elf_hash_table (info)->dynsymcount |
| - g->global_gotsym->dynindx) |
| <= g->global_gotno); |
| } |
| |
| /* We include .MIPS.options, even though we don't process it quite right. |
| (Some entries are supposed to be merged.) At IRIX6 empirically we seem |
| to be better off including it than not. */ |
| for (secpp = &abfd->sections; *secpp != NULL; secpp = &(*secpp)->next) |
| { |
| if (strcmp ((*secpp)->name, ".MIPS.options") == 0) |
| { |
| for (p = (*secpp)->link_order_head; p != NULL; p = p->next) |
| if (p->type == bfd_indirect_link_order) |
| p->u.indirect.section->flags &=~ SEC_HAS_CONTENTS; |
| (*secpp)->link_order_head = NULL; |
| bfd_section_list_remove (abfd, secpp); |
| --abfd->section_count; |
| |
| break; |
| } |
| } |
| |
| /* Get a value for the GP register. */ |
| if (elf_gp (abfd) == 0) |
| { |
| struct bfd_link_hash_entry *h; |
| |
| h = bfd_link_hash_lookup (info->hash, "_gp", false, false, true); |
| if (h != (struct bfd_link_hash_entry *) NULL |
| && h->type == bfd_link_hash_defined) |
| elf_gp (abfd) = (h->u.def.value |
| + h->u.def.section->output_section->vma |
| + h->u.def.section->output_offset); |
| else if (info->relocateable) |
| { |
| bfd_vma lo = MINUS_ONE; |
| |
| /* Find the GP-relative section with the lowest offset. */ |
| for (o = abfd->sections; o != NULL; o = o->next) |
| if (o->vma < lo |
| && (elf_section_data (o)->this_hdr.sh_flags & SHF_MIPS_GPREL)) |
| lo = o->vma; |
| |
| /* And calculate GP relative to that. */ |
| elf_gp (abfd) = (lo + 0x7ff0); |
| } |
| else |
| { |
| /* If the relocate_section function needs to do a reloc |
| involving the GP value, it should make a reloc_dangerous |
| callback to warn that GP is not defined. */ |
| } |
| } |
| |
| /* Go through the sections and collect the .mdebug information. */ |
| mdebug_sec = NULL; |
| gptab_data_sec = NULL; |
| gptab_bss_sec = NULL; |
| for (o = abfd->sections; o != (asection *) NULL; o = o->next) |
| { |
| if (strcmp (o->name, ".mdebug") == 0) |
| { |
| struct extsym_info einfo; |
| bfd_vma last; |
| |
| /* We have found the .mdebug section in the output file. |
| Look through all the link_orders comprising it and merge |
| the information together. */ |
| symhdr->magic = swap->sym_magic; |
| /* FIXME: What should the version stamp be? */ |
| symhdr->vstamp = 0; |
| symhdr->ilineMax = 0; |
| symhdr->cbLine = 0; |
| symhdr->idnMax = 0; |
| symhdr->ipdMax = 0; |
| symhdr->isymMax = 0; |
| symhdr->ioptMax = 0; |
| symhdr->iauxMax = 0; |
| symhdr->issMax = 0; |
| symhdr->issExtMax = 0; |
| symhdr->ifdMax = 0; |
| symhdr->crfd = 0; |
| symhdr->iextMax = 0; |
| |
| /* We accumulate the debugging information itself in the |
| debug_info structure. */ |
| debug.line = NULL; |
| debug.external_dnr = NULL; |
| debug.external_pdr = NULL; |
| debug.external_sym = NULL; |
| debug.external_opt = NULL; |
| debug.external_aux = NULL; |
| debug.ss = NULL; |
| debug.ssext = debug.ssext_end = NULL; |
| debug.external_fdr = NULL; |
| debug.external_rfd = NULL; |
| debug.external_ext = debug.external_ext_end = NULL; |
| |
| mdebug_handle = bfd_ecoff_debug_init (abfd, &debug, swap, info); |
| if (mdebug_handle == (PTR) NULL) |
| return false; |
| |
| esym.jmptbl = 0; |
| esym.cobol_main = 0; |
| esym.weakext = 0; |
| esym.reserved = 0; |
| esym.ifd = ifdNil; |
| esym.asym.iss = issNil; |
| esym.asym.st = stLocal; |
| esym.asym.reserved = 0; |
| esym.asym.index = indexNil; |
| last = 0; |
| for (i = 0; i < sizeof (secname) / sizeof (secname[0]); i++) |
| { |
| esym.asym.sc = sc[i]; |
| s = bfd_get_section_by_name (abfd, secname[i]); |
| if (s != NULL) |
| { |
| esym.asym.value = s->vma; |
| last = s->vma + s->_raw_size; |
| } |
| else |
| esym.asym.value = last; |
| if (!bfd_ecoff_debug_one_external (abfd, &debug, swap, |
| secname[i], &esym)) |
| return false; |
| } |
| |
| for (p = o->link_order_head; |
| p != (struct bfd_link_order *) NULL; |
| p = p->next) |
| { |
| asection *input_section; |
| bfd *input_bfd; |
| const struct ecoff_debug_swap *input_swap; |
| struct ecoff_debug_info input_debug; |
| char *eraw_src; |
| char *eraw_end; |
| |
| if (p->type != bfd_indirect_link_order) |
| { |
| if (p->type == bfd_data_link_order) |
| continue; |
| abort (); |
| } |
| |
| input_section = p->u.indirect.section; |
| input_bfd = input_section->owner; |
| |
| if (bfd_get_flavour (input_bfd) != bfd_target_elf_flavour |
| || (get_elf_backend_data (input_bfd) |
| ->elf_backend_ecoff_debug_swap) == NULL) |
| { |
| /* I don't know what a non MIPS ELF bfd would be |
| doing with a .mdebug section, but I don't really |
| want to deal with it. */ |
| continue; |
| } |
| |
| input_swap = (get_elf_backend_data (input_bfd) |
| ->elf_backend_ecoff_debug_swap); |
| |
| BFD_ASSERT (p->size == input_section->_raw_size); |
| |
| /* The ECOFF linking code expects that we have already |
| read in the debugging information and set up an |
| ecoff_debug_info structure, so we do that now. */ |
| if (! _bfd_mips_elf_read_ecoff_info (input_bfd, input_section, |
| &input_debug)) |
| return false; |
| |
| if (! (bfd_ecoff_debug_accumulate |
| (mdebug_handle, abfd, &debug, swap, input_bfd, |
| &input_debug, input_swap, info))) |
| return false; |
| |
| /* Loop through the external symbols. For each one with |
| interesting information, try to find the symbol in |
| the linker global hash table and save the information |
| for the output external symbols. */ |
| eraw_src = input_debug.external_ext; |
| eraw_end = (eraw_src |
| + (input_debug.symbolic_header.iextMax |
| * input_swap->external_ext_size)); |
| for (; |
| eraw_src < eraw_end; |
| eraw_src += input_swap->external_ext_size) |
| { |
| EXTR ext; |
| const char *name; |
| struct mips_elf64_link_hash_entry *h; |
| |
| (*input_swap->swap_ext_in) (input_bfd, (PTR) eraw_src, &ext); |
| if (ext.asym.sc == scNil |
| || ext.asym.sc == scUndefined |
| || ext.asym.sc == scSUndefined) |
| continue; |
| |
| name = input_debug.ssext + ext.asym.iss; |
| h = mips_elf64_link_hash_lookup (mips_elf64_hash_table (info), |
| name, false, false, true); |
| if (h == NULL || h->esym.ifd != -2) |
| continue; |
| |
| if (ext.ifd != -1) |
| { |
| BFD_ASSERT (ext.ifd |
| < input_debug.symbolic_header.ifdMax); |
| ext.ifd = input_debug.ifdmap[ext.ifd]; |
| } |
| |
| h->esym = ext; |
| } |
| |
| /* Free up the information we just read. */ |
| free (input_debug.line); |
| free (input_debug.external_dnr); |
| free (input_debug.external_pdr); |
| free (input_debug.external_sym); |
| free (input_debug.external_opt); |
| free (input_debug.external_aux); |
| free (input_debug.ss); |
| free (input_debug.ssext); |
| free (input_debug.external_fdr); |
| free (input_debug.external_rfd); |
| free (input_debug.external_ext); |
| |
| /* Hack: reset the SEC_HAS_CONTENTS flag so that |
| elf_link_input_bfd ignores this section. */ |
| input_section->flags &=~ SEC_HAS_CONTENTS; |
| } |
| |
| /* Build the external symbol information. */ |
| einfo.abfd = abfd; |
| einfo.info = info; |
| einfo.debug = &debug; |
| einfo.swap = swap; |
| einfo.failed = false; |
| mips_elf64_link_hash_traverse (mips_elf64_hash_table (info), |
| mips_elf64_output_extsym, |
| (PTR) &einfo); |
| if (einfo.failed) |
| return false; |
| |
| /* Set the size of the .mdebug section. */ |
| o->_raw_size = bfd_ecoff_debug_size (abfd, &debug, swap); |
| |
| /* Skip this section later on (I don't think this currently |
| matters, but someday it might). */ |
| o->link_order_head = (struct bfd_link_order *) NULL; |
| |
| mdebug_sec = o; |
| } |
| |
| if (strncmp (o->name, ".gptab.", sizeof ".gptab." - 1) == 0) |
| { |
| const char *subname; |
| unsigned int c; |
| Elf32_gptab *tab; |
| Elf32_External_gptab *ext_tab; |
| unsigned int i; |
| |
| /* The .gptab.sdata and .gptab.sbss sections hold |
| information describing how the small data area would |
| change depending upon the -G switch. These sections |
| not used in executables files. */ |
| if (! info->relocateable) |
| { |
| asection **secpp; |
| |
| for (p = o->link_order_head; |
| p != (struct bfd_link_order *) NULL; |
| p = p->next) |
| { |
| asection *input_section; |
| |
| if (p->type != bfd_indirect_link_order) |
| { |
| if (p->type == bfd_data_link_order) |
| continue; |
| abort (); |
| } |
| |
| input_section = p->u.indirect.section; |
| |
| /* Hack: reset the SEC_HAS_CONTENTS flag so that |
| elf_link_input_bfd ignores this section. */ |
| input_section->flags &=~ SEC_HAS_CONTENTS; |
| } |
| |
| /* Skip this section later on (I don't think this |
| currently matters, but someday it might). */ |
| o->link_order_head = (struct bfd_link_order *) NULL; |
| |
| /* Really remove the section. */ |
| for (secpp = &abfd->sections; |
| *secpp != o; |
| secpp = &(*secpp)->next) |
| ; |
| bfd_section_list_remove (abfd, secpp); |
| --abfd->section_count; |
| |
| continue; |
| } |
| |
| /* There is one gptab for initialized data, and one for |
| uninitialized data. */ |
| if (strcmp (o->name, ".gptab.sdata") == 0) |
| gptab_data_sec = o; |
| else if (strcmp (o->name, ".gptab.sbss") == 0) |
| gptab_bss_sec = o; |
| else |
| { |
| (*_bfd_error_handler) |
| (_("%s: illegal section name `%s'"), |
| bfd_archive_filename (abfd), o->name); |
| bfd_set_error (bfd_error_nonrepresentable_section); |
| return false; |
| } |
| |
| /* The linker script always combines .gptab.data and |
| .gptab.sdata into .gptab.sdata, and likewise for |
| .gptab.bss and .gptab.sbss. It is possible that there is |
| no .sdata or .sbss section in the output file, in which |
| case we must change the name of the output section. */ |
| subname = o->name + sizeof ".gptab" - 1; |
| if (bfd_get_section_by_name (abfd, subname) == NULL) |
| { |
| if (o == gptab_data_sec) |
| o->name = ".gptab.data"; |
| else |
| o->name = ".gptab.bss"; |
| subname = o->name + sizeof ".gptab" - 1; |
| BFD_ASSERT (bfd_get_section_by_name (abfd, subname) != NULL); |
| } |
| |
| /* Set up the first entry. */ |
| c = 1; |
| tab = (Elf32_gptab *) bfd_malloc (c * sizeof (Elf32_gptab)); |
| if (tab == NULL) |
| return false; |
| tab[0].gt_header.gt_current_g_value = elf_gp_size (abfd); |
| tab[0].gt_header.gt_unused = 0; |
| |
| /* Combine the input sections. */ |
| for (p = o->link_order_head; |
| p != (struct bfd_link_order *) NULL; |
| p = p->next) |
| { |
| asection *input_section; |
| bfd *input_bfd; |
| bfd_size_type size; |
| unsigned long last; |
| bfd_size_type gpentry; |
| |
| if (p->type != bfd_indirect_link_order) |
| { |
| if (p->type == bfd_data_link_order) |
| continue; |
| abort (); |
| } |
| |
| input_section = p->u.indirect.section; |
| input_bfd = input_section->owner; |
| |
| /* Combine the gptab entries for this input section one |
| by one. We know that the input gptab entries are |
| sorted by ascending -G value. */ |
| size = bfd_section_size (input_bfd, input_section); |
| last = 0; |
| for (gpentry = sizeof (Elf32_External_gptab); |
| gpentry < size; |
| gpentry += sizeof (Elf32_External_gptab)) |
| { |
| Elf32_External_gptab ext_gptab; |
| Elf32_gptab int_gptab; |
| unsigned long val; |
| unsigned long add; |
| boolean exact; |
| unsigned int look; |
| |
| if (! (bfd_get_section_contents |
| (input_bfd, input_section, (PTR) &ext_gptab, |
| gpentry, sizeof (Elf32_External_gptab)))) |
| { |
| free (tab); |
| return false; |
| } |
| |
| mips_elf64_swap_gptab_in (input_bfd, &ext_gptab, |
| &int_gptab); |
| val = int_gptab.gt_entry.gt_g_value; |
| add = int_gptab.gt_entry.gt_bytes - last; |
| |
| exact = false; |
| for (look = 1; look < c; look++) |
| { |
| if (tab[look].gt_entry.gt_g_value >= val) |
| tab[look].gt_entry.gt_bytes += add; |
| |
| if (tab[look].gt_entry.gt_g_value == val) |
| exact = true; |
| } |
| |
| if (! exact) |
| { |
| Elf32_gptab *new_tab; |
| unsigned int max; |
| |
| /* We need a new table entry. */ |
| new_tab = ((Elf32_gptab *) |
| bfd_realloc ((PTR) tab, |
| (c + 1) * sizeof (Elf32_gptab))); |
| if (new_tab == NULL) |
| { |
| free (tab); |
| return false; |
| } |
| tab = new_tab; |
| tab[c].gt_entry.gt_g_value = val; |
| tab[c].gt_entry.gt_bytes = add; |
| |
| /* Merge in the size for the next smallest -G |
| value, since that will be implied by this new |
| value. */ |
| max = 0; |
| for (look = 1; look < c; look++) |
| { |
| if (tab[look].gt_entry.gt_g_value < val |
| && (max == 0 |
| || (tab[look].gt_entry.gt_g_value |
| > tab[max].gt_entry.gt_g_value))) |
| max = look; |
| } |
| if (max != 0) |
| tab[c].gt_entry.gt_bytes += |
| tab[max].gt_entry.gt_bytes; |
| |
| ++c; |
| } |
| |
| last = int_gptab.gt_entry.gt_bytes; |
| } |
| |
| /* Hack: reset the SEC_HAS_CONTENTS flag so that |
| elf_link_input_bfd ignores this section. */ |
| input_section->flags &=~ SEC_HAS_CONTENTS; |
| } |
| |
| /* The table must be sorted by -G value. */ |
| if (c > 2) |
| qsort (tab + 1, c - 1, sizeof (tab[0]), gptab_compare); |
| |
| /* Swap out the table. */ |
| ext_tab = ((Elf32_External_gptab *) |
| bfd_alloc (abfd, c * sizeof (Elf32_External_gptab))); |
| if (ext_tab == NULL) |
| { |
| free (tab); |
| return false; |
| } |
| |
| for (i = 0; i < c; i++) |
| mips_elf64_swap_gptab_out (abfd, tab + i, ext_tab + i); |
| free (tab); |
| |
| o->_raw_size = c * sizeof (Elf32_External_gptab); |
| o->contents = (bfd_byte *) ext_tab; |
| |
| /* Skip this section later on (I don't think this currently |
| matters, but someday it might). */ |
| o->link_order_head = (struct bfd_link_order *) NULL; |
| } |
| } |
| |
| /* Invoke the regular ELF backend linker to do all the work. */ |
| if (!bfd_elf64_bfd_final_link (abfd, info)) |
| return false; |
| |
| /* Now write out the computed sections. */ |
| if (mdebug_sec != (asection *) NULL) |
| { |
| BFD_ASSERT (abfd->output_has_begun); |
| if (! bfd_ecoff_write_accumulated_debug (mdebug_handle, abfd, &debug, |
| swap, info, |
| mdebug_sec->filepos)) |
| return false; |
| |
| bfd_ecoff_debug_free (mdebug_handle, abfd, &debug, swap, info); |
| } |
| if (gptab_data_sec != (asection *) NULL) |
| { |
| if (! bfd_set_section_contents (abfd, gptab_data_sec, |
| gptab_data_sec->contents, |
| (file_ptr) 0, |
| gptab_data_sec->_raw_size)) |
| return false; |
| } |
| |
| if (gptab_bss_sec != (asection *) NULL) |
| { |
| if (! bfd_set_section_contents (abfd, gptab_bss_sec, |
| gptab_bss_sec->contents, |
| (file_ptr) 0, |
| gptab_bss_sec->_raw_size)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* ECOFF swapping routines. These are used when dealing with the |
| .mdebug section, which is in the ECOFF debugging format. */ |
| static const struct ecoff_debug_swap mips_elf64_ecoff_debug_swap = |
| { |
| /* Symbol table magic number. */ |
| magicSym2, |
| /* Alignment of debugging information. E.g., 4. */ |
| 8, |
| /* Sizes of external symbolic information. */ |
| sizeof (struct hdr_ext), |
| sizeof (struct dnr_ext), |
| sizeof (struct pdr_ext), |
| sizeof (struct sym_ext), |
| sizeof (struct opt_ext), |
| sizeof (struct fdr_ext), |
| sizeof (struct rfd_ext), |
| sizeof (struct ext_ext), |
| /* Functions to swap in external symbolic data. */ |
| ecoff_swap_hdr_in, |
| ecoff_swap_dnr_in, |
| ecoff_swap_pdr_in, |
| ecoff_swap_sym_in, |
| ecoff_swap_opt_in, |
| ecoff_swap_fdr_in, |
| ecoff_swap_rfd_in, |
| ecoff_swap_ext_in, |
| _bfd_ecoff_swap_tir_in, |
| _bfd_ecoff_swap_rndx_in, |
| /* Functions to swap out external symbolic data. */ |
| ecoff_swap_hdr_out, |
| ecoff_swap_dnr_out, |
| ecoff_swap_pdr_out, |
| ecoff_swap_sym_out, |
| ecoff_swap_opt_out, |
| ecoff_swap_fdr_out, |
| ecoff_swap_rfd_out, |
| ecoff_swap_ext_out, |
| _bfd_ecoff_swap_tir_out, |
| _bfd_ecoff_swap_rndx_out, |
| /* Function to read in symbolic data. */ |
| _bfd_mips_elf_read_ecoff_info |
| }; |
| |
| /* Relocations in the 64 bit MIPS ELF ABI are more complex than in |
| standard ELF. This structure is used to redirect the relocation |
| handling routines. */ |
| |
| const struct elf_size_info mips_elf64_size_info = |
| { |
| sizeof (Elf64_External_Ehdr), |
| sizeof (Elf64_External_Phdr), |
| sizeof (Elf64_External_Shdr), |
| sizeof (Elf64_Mips_External_Rel), |
| sizeof (Elf64_Mips_External_Rela), |
| sizeof (Elf64_External_Sym), |
| sizeof (Elf64_External_Dyn), |
| sizeof (Elf_External_Note), |
| 4, /* hash-table entry size */ |
| 3, /* internal relocations per external relocations */ |
| 64, /* arch_size */ |
| 8, /* file_align */ |
| ELFCLASS64, |
| EV_CURRENT, |
| bfd_elf64_write_out_phdrs, |
| bfd_elf64_write_shdrs_and_ehdr, |
| mips_elf64_write_relocs, |
| bfd_elf64_swap_symbol_out, |
| mips_elf64_slurp_reloc_table, |
| bfd_elf64_slurp_symbol_table, |
| bfd_elf64_swap_dyn_in, |
| bfd_elf64_swap_dyn_out, |
| mips_elf64_be_swap_reloc_in, |
| mips_elf64_be_swap_reloc_out, |
| mips_elf64_be_swap_reloca_in, |
| mips_elf64_be_swap_reloca_out |
| }; |
| |
| #define ELF_ARCH bfd_arch_mips |
| #define ELF_MACHINE_CODE EM_MIPS |
| |
| #define ELF_MAXPAGESIZE 0x1000 |
| |
| #define elf_backend_collect true |
| #define elf_backend_type_change_ok true |
| #define elf_backend_can_gc_sections true |
| #define elf_info_to_howto mips_elf64_info_to_howto_rela |
| #define elf_info_to_howto_rel mips_elf64_info_to_howto_rel |
| #define elf_backend_object_p _bfd_mips_elf_object_p |
| #define elf_backend_symbol_processing _bfd_mips_elf_symbol_processing |
| #define elf_backend_section_processing _bfd_mips_elf_section_processing |
| #define elf_backend_section_from_shdr _bfd_mips_elf_section_from_shdr |
| #define elf_backend_fake_sections _bfd_mips_elf_fake_sections |
| #define elf_backend_section_from_bfd_section \ |
| _bfd_mips_elf_section_from_bfd_section |
| #define elf_backend_add_symbol_hook _bfd_mips_elf_add_symbol_hook |
| #define elf_backend_link_output_symbol_hook \ |
| _bfd_mips_elf_link_output_symbol_hook |
| #define elf_backend_create_dynamic_sections \ |
| mips_elf64_create_dynamic_sections |
| #define elf_backend_check_relocs mips_elf64_check_relocs |
| #define elf_backend_adjust_dynamic_symbol \ |
| mips_elf64_adjust_dynamic_symbol |
| #define elf_backend_always_size_sections \ |
| mips_elf64_always_size_sections |
| #define elf_backend_size_dynamic_sections \ |
| mips_elf64_size_dynamic_sections |
| #define elf_backend_relocate_section mips_elf64_relocate_section |
| #define elf_backend_finish_dynamic_symbol \ |
| mips_elf64_finish_dynamic_symbol |
| #define elf_backend_finish_dynamic_sections \ |
| mips_elf64_finish_dynamic_sections |
| #define elf_backend_final_write_processing \ |
| _bfd_mips_elf_final_write_processing |
| #define elf_backend_additional_program_headers \ |
| mips_elf64_additional_program_headers |
| #define elf_backend_modify_segment_map _bfd_mips_elf_modify_segment_map |
| #define elf_backend_gc_mark_hook mips_elf64_gc_mark_hook |
| #define elf_backend_gc_sweep_hook mips_elf64_gc_sweep_hook |
| #define elf_backend_ecoff_debug_swap &mips_elf64_ecoff_debug_swap |
| #define elf_backend_size_info mips_elf64_size_info |
| |
| #define elf_backend_got_header_size (4 * MIPS_RESERVED_GOTNO) |
| #define elf_backend_plt_header_size 0 |
| |
| /* MIPS ELF64 can use a mixture of REL and RELA, but some Relocations |
| * work better/work only in RELA, so we default to this. */ |
| #define elf_backend_may_use_rel_p 1 |
| #define elf_backend_may_use_rela_p 1 |
| #define elf_backend_default_use_rela_p 1 |
| |
| /* We don't set bfd_elf64_bfd_is_local_label_name because the 32-bit |
| MIPS-specific function only applies to IRIX5, which had no 64-bit |
| ABI. */ |
| #define bfd_elf64_find_nearest_line _bfd_mips_elf_find_nearest_line |
| #define bfd_elf64_set_section_contents _bfd_mips_elf_set_section_contents |
| #define bfd_elf64_bfd_link_hash_table_create \ |
| mips_elf64_link_hash_table_create |
| #define bfd_elf64_bfd_final_link mips_elf64_final_link |
| #define bfd_elf64_bfd_merge_private_bfd_data \ |
| _bfd_mips_elf_merge_private_bfd_data |
| #define bfd_elf64_bfd_set_private_flags _bfd_mips_elf_set_private_flags |
| #define bfd_elf64_bfd_print_private_bfd_data \ |
| _bfd_mips_elf_print_private_bfd_data |
| |
| #define bfd_elf64_get_reloc_upper_bound mips_elf64_get_reloc_upper_bound |
| #define bfd_elf64_bfd_reloc_type_lookup mips_elf64_reloc_type_lookup |
| #define bfd_elf64_archive_functions |
| extern boolean bfd_elf64_archive_slurp_armap |
| PARAMS((bfd *)); |
| extern boolean bfd_elf64_archive_write_armap |
| PARAMS((bfd *, unsigned int, struct orl *, unsigned int, int)); |
| #define bfd_elf64_archive_slurp_extended_name_table \ |
| _bfd_archive_coff_slurp_extended_name_table |
| #define bfd_elf64_archive_construct_extended_name_table \ |
| _bfd_archive_coff_construct_extended_name_table |
| #define bfd_elf64_archive_truncate_arname \ |
| _bfd_archive_coff_truncate_arname |
| #define bfd_elf64_archive_read_ar_hdr _bfd_archive_coff_read_ar_hdr |
| #define bfd_elf64_archive_openr_next_archived_file \ |
| _bfd_archive_coff_openr_next_archived_file |
| #define bfd_elf64_archive_get_elt_at_index \ |
| _bfd_archive_coff_get_elt_at_index |
| #define bfd_elf64_archive_generic_stat_arch_elt \ |
| _bfd_archive_coff_generic_stat_arch_elt |
| #define bfd_elf64_archive_update_armap_timestamp \ |
| _bfd_archive_coff_update_armap_timestamp |
| |
| /* The SGI style (n)64 NewABI. */ |
| #define TARGET_LITTLE_SYM bfd_elf64_littlemips_vec |
| #define TARGET_LITTLE_NAME "elf64-littlemips" |
| #define TARGET_BIG_SYM bfd_elf64_bigmips_vec |
| #define TARGET_BIG_NAME "elf64-bigmips" |
| |
| #include "elf64-target.h" |
| |
| #define INCLUDED_TARGET_FILE /* More a type of flag. */ |
| |
| /* The SYSV-style 'traditional' (n)64 NewABI. */ |
| #undef TARGET_LITTLE_SYM |
| #undef TARGET_LITTLE_NAME |
| #undef TARGET_BIG_SYM |
| #undef TARGET_BIG_NAME |
| |
| #define TARGET_LITTLE_SYM bfd_elf64_tradlittlemips_vec |
| #define TARGET_LITTLE_NAME "elf64-tradlittlemips" |
| #define TARGET_BIG_SYM bfd_elf64_tradbigmips_vec |
| #define TARGET_BIG_NAME "elf64-tradbigmips" |
| |
| /* Include the target file again for this target. */ |
| #include "elf64-target.h" |