| Tue Apr 18 15:36:07 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * Makefile.in (clean mostlyclean): Do not delete $(MISCELLANEOUS). |
| |
| Tue Mar 14 15:54:57 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * basics.c: Add EMACS local variable pointing change-log at this |
| file. |
| * Makefile.in: Ditto |
| |
| 2000-03-13 James Ingham <jingham@leda.cygnus.com> |
| |
| * mi-var-block.exp: The error report from varobj_create changed |
| since I am now trapping parse_exp_1 errors. Change the tests to |
| match the new error message. |
| * mi-var-child.exp: Ditto. |
| * mi-var-cmd.exp: Ditto. |
| |
| 2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-disassemble.exp: Don't assume numbers for the offset |
| values. They can be different depending on the architecture. |
| |
| * mi-watch.exp (test_watchpoint_triggering): In same cases the |
| type can be 'hw wathcpoint' not just 'watchpoint'. Adjust for that. |
| |
| * basics.c (callee4): Make the function return something, |
| otherwise the return value is undefined. |
| |
| 2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-basics.exp: Comment out test for a still unimplemented operation. |
| |
| * mi-disassemble.exp: Rewrite most of the tests to conform to new |
| disassemble interface. |
| |
| Sat Mar 4 13:55:08 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| From Fri 3 Mar 2000 Peter Schauer: |
| * mi-support.exp (mi_gdb_start): When GDB doesn't recongize -i=mi |
| option, assume no MI support present. |
| |
| 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-support.exp (mi_gdb_start): Update to recognize start up |
| message with 'UI_OUT' instead of 'HEADLESS'. |
| |
| 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-regs.exp (test_running_the_program): Add global var 'hex'. |
| |
| * mi-stack.exp, mi-stepi.exp, mi-until.exp, mi-watch.exp, |
| mi-var-display.exp, mi-var-cmd.exp, mi-var-child.exp, |
| mi-var-block.exp: Update all stopped messages. |
| |
| 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-console.exp, mi-disassemble.exp, mi-eval.exp, |
| mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp: |
| Update stopped messages, update copyright. |
| |
| * mi-disassemble.exp: Update error messages output. |
| |
| * mi-support.exp (proc mi_step): Make gdb do a 'step' command, not |
| a 'next'. Update stopped message. |
| (proc mi_next): Update stop message. |
| (proc mi_run_to_main): Update stopped message. |
| Update copyright. |
| |
| 2000-01-11 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-simplerun.exp: Remove stack frames tests from here, to: |
| |
| * mi-stack.exp: New file, tests for stack commands. |
| |
| * mi-support.exp (mi_run_to_main, mi_next, mi_step) : Update to |
| include thread-id in stopped message. |
| |
| * mi-regs.exp: Update break-insert output. |
| |
| * (mi-console.exp, mi-disassemble.exp, mi-eval.exp, |
| mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp, |
| mi-stepi.exp, mi-until.exp, mi-var-block.exp, mi-var-child.exp, |
| mi-var-cmd.exp, mi-var-display.exp, mi-watch.exp): Update stopped |
| message to include thread-id. |
| |
| Wed Dec 29 22:06:05 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-watch.exp, mi-var-display.exp, mi-var-cmd.exp, |
| mi-var-child.exp, mi-var-block.exp, mi-until.exp, mi-stepi.exp, |
| mi-simplerun.exp, mi-return.exp, mi-support.exp, mi-eval.exp, |
| mi-console.exp, mi-disassemble.exp, mi-break.exp: Update to |
| reflect extended output from -break-insert command. |
| |
| * mi-break.exp (test_rbreak_creation_and_listing): XFAIL regexp |
| tests. -r flag broken by above. |
| |
| Sun Dec 19 19:28:13 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * cpp_variable.cc, cpp_variable.h, c_variable.c: Delete. |
| |
| Fri Dec 17 20:59:55 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-read-memory.exp: Test of ``-o <offset>'' now works. |
| |
| 1999-12-16 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-var-cmd.exp: Fix 2 tests outputs. |
| |
| * mi-var-child.exp: Add many more tests. |
| |
| * mi-var-display.exp: Add many more tests. |
| |
| * var-cmd.c: Change type of incr_a parameter to char. |
| |
| 1999-12-15 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-var-block.exp: Set up xfails fro known problems. |
| |
| * mi-var-display.exp: Set up printing of values of 'e' and 'anone' |
| as xfails. |
| |
| * mi-var-child.exp: Fix typos. |
| |
| 1999-12-15 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-var-child.exp: Space was missing before ``[10]''. |
| |
| Wed Dec 15 19:23:38 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-read-memory.exp: Add test for ``-o <offset>''. Update checks |
| and match next-row et.al. |
| |
| 1999-12-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-var-display.exp : New file. Tests for format and type, with |
| unions, structs and enums. |
| |
| * mi-var-cmd.exp: Add some var-assign tests. |
| |
| 1999-12-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-var-cmd.exp, mi-var-block.exp, mi-var-child.exp: New files |
| some tests for -var* commands. |
| |
| * var-cmd.c: New source file for var-* commands tests. |
| * gdb.mi/Makefile.in (PROGS): Add var-cmd. |
| |
| Mon Dec 13 18:06:09 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-break.exp: Fix quoting. Changed "srcfile.c":6 to |
| "\"srcfile.c\":6". |
| * mi-simplerun.exp: Fix quoting. |
| |
| Sat Dec 11 21:33:37 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-simplerun.exp (exec-finish): Fix return value was zero, |
| should have been three. |
| |
| * mi-disassemble.exp: Reduce number of wild card matches in |
| * patterns. Remove all numeric constants. |
| |
| 1999-12-09 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-eval.exp: New file. Some initial tests for |
| -data-evaluate-expression. |
| |
| 1999-12-09 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * c_variable.c, cpp_variable.cc, cpp_variable.h: New files. Used |
| for testing "var" operations. |
| * Makefile.in: Add reference to the above files. |
| |
| 1999-12-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-regs.exp: Fix test for format 'N' for |
| data-list-register-values. |
| |
| 1999-12-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-disassemble.exp: Update expected output. Break test of |
| disassembly in mixed mode into 2 functions. |
| |
| * mi-regs.exp: Initial register tests. Works only on sparc right |
| now. |
| |
| 1999-12-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-stepi.exp: New file. Tests exec-step-instruction and |
| exec-next-instruction. |
| * mi-until.exp: New file. Tests exec-until. |
| * until.c: New file. |
| * mi-return.exp: New file. Tests exec-return. |
| |
| Thu Dec 2 09:38:23 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-hack-cli.exp: New test. Check the hacked up access to the |
| CLI. |
| |
| Wed Dec 1 16:47:40 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-basics.exp: Delete calls to mi_delete_breakpoints, |
| mi_gdb_reinitialize_dir and mi_gdb_load. This test is checking |
| that these can work. |
| |
| * mi-support.exp (mi_step, mi_next, mi_run_to_main): New |
| procedures. |
| |
| * mi-read-memory.exp, mi-read-memory.c: New files. Test |
| data-read-memory command. |
| |
| Tue Nov 30 23:54:16 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-support.exp: Don't start SID until after GDB has been started |
| and verified. |
| |
| Tue Nov 30 22:21:33 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-support.exp (mi_uncatched_gdb_exit): When SID, call sid_exit. |
| (mi_gdb_start): When SID, call sid_start. |
| (mi_gdb_start): Add MIFLAGS to spawn-GDB command. Check for |
| HEADLESS gdb. Return non-zero when GDB fails to start. |
| (mi_gdb_load): When SID or SIM, download program. |
| (mi_run_cmd): Don't do download here. Assume target supports the |
| 00-exec-run command. |
| (skip_mi_tests, setup_gdbmi, unset_gdbmi): Delete. Merged into |
| mi_gdb_start. |
| |
| * mi-basics.exp, mi-break.exp, mi-console.exp, mi-disassemble.exp, |
| mi-simplerun.exp, mi-watch.exp: Update. Check status from |
| mi_gdb_start indicating that GDB started correctly. |
| |
| Tue Nov 30 15:22:08 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-support.exp (setup_gdbmi, unset_gdbmi): New |
| procedures. Setup/unset dejagnu for mi tests. |
| * mi-basics.exp, mi-console.exp, mi-simplerun.exp, mi-break.exp, |
| mi-disassemble.exp, mi-watch.exp: Update. |
| |
| 1999-11-29 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-simplerun.exp (test_running_the_program): Remove XFAIL. The |
| output is fixed now. |
| (test_program_termination): Update output pattern. |
| |
| Tue Nov 30 00:19:10 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-console.c, mi-console.exp: New files. Test console output. |
| |
| Mon Nov 29 17:59:13 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-support.exp (mi_run_command): Check for exec-run command |
| failure due to MI not having an active target. |
| (mi_run_command): Check for and handle a builtin simulator target. |
| (mi_run_command): Don't check/handle for ``The program has been |
| started already'', not a valid MI response. |
| |
| * mi-simplerun.exp (test_running_the_program): Update all patterns |
| to match async output. |
| (test_running_the_program): Mark ``step to callee4'' as XFAIL. MI |
| output contains {,reason="end-stepping-range"}+. |
| |
| * mi-simplerun.exp: Limit the timeout for ``step to callee4'' to |
| 30 seconds. |
| |
| Mon Nov 29 17:30:00 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mi-support.exp (skip_mi_tests): Print UNTESTED when MI interface |
| isn't available. Start/stop instead of assuming GDB is running. |
| (MIFLAGS): Define. |
| * mi-simplerun.exp, mi-disassemble.exp, mi-break.exp, |
| mi-basics.exp, mi-watch.exp: Update. |
| |
| 1999-11-26 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * mi-simplerun.exp: Move break-insert {-t, -r} from here. |
| * mi-break.exp: To here. New file. |
| * mi-watch.exp: New file. Tests for watchpoints. |
| |
| Wed Nov 24 17:42:07 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * gdb.mi/ChangeLog-mi: MI entries moved to here. |
| |
| Wed Nov 24 17:31:04 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * gdb.mi/mi-basics.exp, gdb.mi/mi-disassemble.exp, |
| gdb.mi/mi-simplerun.exp: Print warning message when test isn't |
| run. |
| |
| 1999-11-23 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * gdb.mi/mi-simplerun.exp: Update output of break-list to account for |
| "times" field. |
| |
| 1999-11-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * gdb.mi/mi-simplerun.exp: Add tests for temporary breakpoints |
| and bp based on regular expressions. |
| * gdb.mi/mi-disassemble.exp: Fix typo. |
| |
| 1999-11-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * gdb.mi/mi-disassemble.exp: Update output of execution commands |
| to reflect new 'reason' field. |
| * gdb.mi/mi-simplerun.exp: Ditto. |
| |
| 1999-10-25 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * gdb.mi/mi-simplerun.exp: Add more stack-list-frames tests. |
| |
| * gdb.mi/mi-disassemble.exp: Update 'run to main' output. |
| |
| * gdb.mi/mi-simplerun.exp: Update execution commands |
| output. Update backtrace output. |
| |
| 1999-10-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * gdb.mi/mi-disassemble.exp: Add new tests for the new |
| disassembly command parameter, number of lines. |
| |
| Mon Oct 11 13:57:21 1999 Andrew Cagney <cagney@amy.cygnus.com> |
| |
| * lib/mi-support.exp: Break complicated gdb_expect containing |
| exp_continue into a while within an expect. Don't attempt a start |
| more than three times. Check return value from gdb_load. |
| |
| 1999-10-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * gdb.mi/mi-disassemble.exp: New file. |
| |
| Wed Oct 6 12:05:58 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * lib/mi-support.exp (mi_run_cmd): Give up after two restart |
| attempts. |
| |
| 1999-09290 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * gdb.mi/mi-basics.exp: Update to current syntax and output formats. |
| * gdb.mi/mi-simplerun.exp: Ditto. |
| * lib/mi-support.exp (mi_delete_breakpoints): Ditto. |
| |
| 1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * gdb.mi/basics.c (main): Fix return code. Add a print "Hello, |
| World". |
| * gdb.mi/mi-basics.exp: Fix message texts and numbering. |
| * gdb.mi/mi-simplerun.exp: Ditto. Also, add new tests and improve |
| some patterns. |
| |
| 1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * lib/mi-support.exp (mi_gdb_reinitialize_dir): Remove query as an |
| acceptable response to the environment-dir command. |
| |
| 1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * lib/mi-support.exp (mi_delete_breakpoints): Remove references to |
| gdb-cli. |
| (mi_run_cmd): Ditto. |
| |
| 1999-06-25 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * lib/mi-support.exp (skip_mi_tests): Use gdb-version to check for |
| headless output format. |
| |
| 1999-06-24 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * gdb.mi/mi-simplerun.exp (test_controlled_execution): Add global |
| spec for hex. |
| |
| 1999-06-24 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * lib/mi-support.exp (mi_run_cmd): Fix pattern and add a timeout |
| clause. |
| |
| 1999-06-24 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * lib/mi-support.exp: Use mi_gdb_prompt instead of a modified |
| gdb_prompt. Remove uneeded loading of libgloss. |
| (mi_gdb_exit): Remove prompt argument. |
| (mi_uncatched_gdb_exit): Ditto. |
| (mi_run_cmd): New proc. MI version of gdb_run. |
| (skip_mi_tests): New proc. Check if gdb is capable of producing |
| headless formatted output. |
| * gdb.mi/mi-basics.exp: Use mi_gdb_prompt instead of a modified |
| gdb_prompt. Eliminate parameter to mi_gdb_exit (as a result of |
| the above). Test for skip_mi_tests before running. |
| Note: The above changes are interelated (need each other). |
| * gdb.mi/mi-simplerun.exp: Same changes as for mi-basics.exe |
| above. |
| (test_breakpoint_creation_and_listing): Remove insertion of |
| breakpoint at callee1 (and renumber tokens). Add tests for |
| break-list, break-disable and break-info. |
| (test_running_the_program): Use mi_run_cmd so it can run on remote |
| targets. |
| (test_controlled_execution): Fix broken test. |
| (test_program_termination): Test implemented. |
| * gdb.mi/basic.c (main): Small change to allow for testing of both |
| exec-next and exec-step operations. |
| |
| 1999-06-22 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * lib/mi-support.exp (mi_gdb_test): New proc. MI version of gdb_test. |
| * gdb.mi/mi-basics.exp: Use the above instead of gdb_test. |
| * gdb.mi/mi-simplerun.exp: Ditto. |
| |
| 1999-06-22 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * gdb.mi/mi-simplerun.exp: New file. Tests simple debugging tasks. |
| * gdb.mi/mi-basics.exp: Remove tests moved to above new file. |
| * lib/mi-support.exp: New file. Support procedures for mi tests. |
| |
| 1999-06-08 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * gdb.mi/mi-basics.exp: Skip all tests if the MI interpreter is |
| not active. |
| |
| 1999-06-03 Fernando Nasser <fnasser@totem.to.cygnus.com> |
| |
| * gdb.mi: New directory. |
| * configure.in: Configure it. |
| * configure: Regenerate. |
| * gdb.mi/{Makefile.in,configure.in,configure}: New files. |
| * gdb.mi/{mi-basics.exp,basics.c,testcmds}: New files. |
| |
| |
| Local Variables: |
| mode: indented-text |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
