| 2006-07-27 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.base/cursal.exp: Add "" to gdb_load call. |
| |
| 2006-07-24 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.base/auxv.exp: Skip on non-linux, non-solaris targets. |
| * gdb.base/cursal.exp: Revert my 2006-06-09 change. Use |
| gdb_file_cmd followed by gdb_load. |
| * gdb.base/dbx.exp: Revert my 2006-06-09 change. |
| |
| 2006-07-23 Kazu Hirata <kazu@codesourcery.com> |
| |
| readline/ |
| Backport from mainline: |
| * emacs_keymap.c: Add a MINGW32 hack. |
| * readline.c: Use _rl_bind_if_unbound to avoid macro bugs. |
| |
| 2006-07-18 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/ |
| * remote-fileio.c (remote_fileio_func_rename): Reorder to process |
| input buffer before reading memory. |
| (remote_fileio_func_stat): Likewise. |
| |
| 2006-07-16 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/ |
| * configure: Rebuild to correct problem in previous patch. |
| |
| 2006-07-15 Vladimir Prus <vladimir@codesourcery.com> |
| |
| gdb/ |
| * configure.ac: Accept --with-versuffix and --with-bugurl. |
| * configure: Regenerate. |
| * Makefile.in: (VERSUFFIX_s, BUGURL_s): New. |
| (GDB_FLAGS): Add -DVERSUFFIX and -DBUGURL. |
| * top.c (print_gdb_version): Print VERSUFFIX and BUGURL. |
| |
| 2006-07-04 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * remote.c (struct remote_state): Add explicit_packet_size. |
| (remote_arch_state): Remove explicit_packet_size. |
| (get_remote_packet_size): Check explicit_packet_size. |
| (get_memory_packet_size): Likewise. |
| (remote_query_packet_info): Update. |
| (remote_open_1): Reset explicit_packet_size. |
| |
| Backport: |
| 2006-07-04 Daniel Jacobowitz <dan@codesourcery.com> |
| * remote.c (init_remote_state): Use xrealloc instead of xmalloc. |
| |
| 2006-06-08 Daniel Jacobowitz <dan@codesourcery.com> |
| * (struct remote_state): New type, only containing |
| buf and buf_size. |
| (remote_state): New variable. |
| (get_remote_state): New function. |
| (struct remote_arch_state): Renamed from struct remote_state. |
| Removed buf and buf_size. |
| (get_remote_arch_state): Renamed from get_remote_state. All |
| necessary callers updated to call this function. |
| (init_remote_state): Initialize the architecture-specific state. |
| Update the target-specific state if necessary. |
| (get_remote_packet_size): New function. All previous references |
| changed to use this accessor function. |
| (packet_reg_from_regnum, packet_reg_from_pnum): Take a |
| remote_arch_state instead of a remote_state. All callers changed. |
| (_initialize_remote): Initialize the packet buffer here. |
| |
| 2006-07-03 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * remote.c (remote_query_packet_info): Update for backported patch. |
| (fetch_registers_using_g, store_registers_using_G) |
| (remote_read_qpart): Likewise. |
| |
| Backport: |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| * remote.c (struct remote_state): Add BUF and BUF_SIZE. |
| (init_remote_state): Initialize the new fields. |
| (get_memory_packet_size): Update BUF and BUF_SIZE if necessary. |
| (set_thread, remote_thread_alive, remote_unpack_thread_info_response) |
| (remote_get_threadinfo, parse_threadlist_response) |
| (remote_get_threadlist, remote_current_thread, remote_threads_info) |
| (remote_threads_extra_info, extended_remote_restart, get_offsets) |
| (remote_check_symbols, remote_open_1, remote_detach) |
| (remove_vcont_probe, remote_vcont_resume, remote_resume) |
| (remote_wait, remote_async_wait, fetch_register_using_p) |
| (remote_fetch_registers, store_register_using_P) |
| (remote_store_registers, check_binary_download, remote_write_bytes) |
| (remote_read_bytes, remote_insert_breakpoint) |
| (remote_remove_breakpoint, remote_insert_watchpoint) |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) |
| (remote_remove_hw_breakpoint, compare_sections_command) |
| (remote_xfer_partial, remote_rcmd, packet_command) |
| (remote_get_thread_local_address): Use the global incoming buffer |
| instead of alloca or xmalloc. Limit outgoing packets to |
| rs->remote_packet_size and incoming packets to rs->buf_size. |
| Update calls to getpkt and remote_send. |
| (remote_send): Take arguments by reference. |
| (putpkt_binary): Eliminate junkbuf. Use skip_frame. |
| (skip_frame): New function. |
| (read_frame): Take arguments by reference. Expand the packet |
| buffer instead of issuing an error. |
| (getpkt, getpkt_sane): Take arguments by reference. |
| * remote.h (getpkt): Update prototype and doc. |
| * tracepoint.c (remote_get_noisy_reply): Take arguments by |
| reference. |
| (target_buf): Change from array to pointer. |
| (target_buf_size): New variable. |
| (remote_set_transparent_ranges): Update call to getpkt. |
| (trace_start_command, trace_stop_command, trace_status_command): |
| Update calls to remote_get_noisy_reply. |
| (finish_tfind_command): Take arguments by reference. |
| (trace_find_command, trace_find_pc_command) |
| (trace_find_tracepoint_command, trace_find_line_command): |
| (trace_find_range_command, trace_find_outside_command): Update |
| calls to finish_tfind_command. |
| (_initialize_tracepoint): Initialize target_buf_size and target_buf. |
| |
| 2006-06-23 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * lib/gdb.exp (gdb_load_cmd): Fix variable name typo |
| * config/unknown.exp: Check gdb_board_support before claiming it |
| is not supported. |
| |
| 2006-06-22 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/: |
| * gdb.base/store.exp: Don't use gdb_suppress_entire_file. |
| * gdb.base/gdb1555.exp: Use gdb_compile_shlib. Skip if not |
| native. |
| * gdb.stabs/exclfwd.exp: Skip the test if configure did not |
| enable stabs testing. |
| * gdb.base/auxv.exp: Intercept undefined command messages before |
| gdb_test_multiple does. |
| |
| 2006-06-19 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.base/recurse.exp: Revert my 2006-06-09 patch. Rely on test |
| harness to set number of hardware watchpoints. |
| |
| 2006-06-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.def (fixincludes): Correct extra_configure_flags |
| typo. |
| (expat): Don't install. Don't build shared libraries. |
| * Makefile.in: Regenerated. |
| |
| 2006-06-13 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * lib/gdb.exp (gdb_load_cmd): New. |
| |
| 2006-06-12 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/ |
| * m68k-tdep.c (m68k_frame_align): Say which archs need alignment. |
| |
| gdb/testsuite/ |
| * gdb.base/charset.exp: Use ${srcfile}. |
| |
| 2006-06-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Issue #669 |
| gdb/ |
| * remote-fileio.c (remote_fileio_func_read): Limit console |
| reads to 8K. |
| |
| 2006-06-09 Nathan Sidwell <nathan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.base/auxv.exp: Skip if bare_board |
| * gdb.base/gdb1555.exp: Likewise. |
| * gdb.base/start.exp: Skip if use_gdb_stub. |
| |
| gdb/testsuite/ |
| * gdb.base/recurse.exp: Add gdb,hardware_watchpoint target |
| info. Adjust testing to cope with a single watchpoint. |
| * gdb.base/watchpoint.exp: Adjust expected string. |
| |
| gdb/testsuite/ |
| * gdb.base/cursal.exp: Run to main before setting listing |
| size. |
| * gdb.base/dbx.exp: Run to main before testing. |
| * gdb.base/ending-run.exp: Add additional expected string. |
| * gdb.base/huge.c: Allow CRASH_GDB to be set from command |
| line. |
| * gdb.base/huge.exp: Loop over compilation to find a size that |
| is acceptable. |
| * gdb.base/remote.exp: Correct expected strings. |
| * gdb.dwarf2/mac-fileno.S: Avoid # comments. |
| |
| gdb/ |
| * remote-file.io.c (remote_fileio_func_system): Treat zero length |
| string as NULL. Adjust for NULL pointer argument. |
| * doc/gdb.texinfo (system): Document behaviour with zero length |
| string. |
| |
| gdb/testsuite/ |
| * gdb.base/fileio.c: Add system(NULL) test. |
| * gdb.base/fileio.exp: Check it. |
| |
| gdb/testsuite/ |
| * gdb.cp/anon-union.cc: Add code at end of function. |
| * gdb.cp/anon-union.exp: Adjust end of function breakpoint. |
| * gdb.mi/var-cmd.c: Add code at end of function. |
| * gdb.mi/mi-var-display.exp: Adjust end of next. |
| * gdb.mi/mi2-var-display.exp: Likewise. |
| |
| gdb/testsuite/ |
| * gdb.base/break.c: Add breakpoint 10a marker. |
| * gdb.base/break.exp: Check breakpoint on } |
| |
| gdb/ |
| * m68k-tdep.c (m68k_frame_align): New. |
| (m68k_push_dummy_call): Don't align here. |
| (m68k_gdbarch_init): Set frame_align here. |
| |
| 2006-06-08 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/remote.c (remote_open_1): Do preopen tasks before |
| irreversably destroying state. |
| |
| * gdb/m68k-tdep.c (m68k_svr4_extract_return_value): Use |
| tdep->ptr_value_regnum for pointer returns. |
| (m68k_svr4_store_return_value): Likewise. |
| (m68k_reg_struct_return_r): New, broken out of ... |
| (m68k_reg_struct_return_p): ... here. Implement gcc's structure |
| mode algorithm. |
| (m68k_svr4_init_abi, m68k_aout_init_abi): Set ptr_value_regnum. |
| (m68k_gdbarch_init): Likewise. |
| * gdb/m68k-tdep.h (struct gdbarch_tdep): Add ptr_value_regnum |
| field. |
| |
| 2006-06-05 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/remote.c (remote_insert_watchpoint): Return -1, rather than |
| fatal error if packet is disabled. |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint, |
| remote_remove_hw_breakpoint): Likewise. |
| Revert my 2006-06-01 Nathan Sidwell <nathan@codesourcery.com> |
| change to breakpoint.c |
| |
| * gdb/testsuite/gdb.asm/m68k.inc (gdbasm_call): Use jsr. |
| * gdb/testsuite/gdb.base/fileio.c (stop): New. Call it everywhere |
| the debugger should stop. |
| * gdb/testsuite/gdb.base/fileio.exp: Add breakpoint to stop |
| routine and adjust. |
| * gdb/testsuite/gdb.base/charset.exp: Specify source file for |
| breakpoint address. |
| |
| * gdb/m68k-tdep.c (M68K_FPREG_SIZE): Remove. |
| (REGISTER_BYTES_FP): Use tdep->fpreg_type. |
| (m68k_register_bytes_ok): adjust. |
| (m68k_register_type): Use tdep->fpreg_type. |
| (m68k_register_to_value, m68k_value_to_register): Likewise. |
| (m68k_svr4_extract_return_value): Use tdep->float_return & |
| tdep->fpreg_type. |
| (m68k_svr4_store_return_value): Likewise. |
| (m68k_gdbarch_init): Set tdep->float_return & tdep->fpreg_type. |
| * gdb/m68k-tdep.h (struct gdbarch_tdep): Add floar_return & |
| fpreg_type fields. |
| * gdb/m68kbsd-tdep.c (m68kbsd_fpreg_offset): Use tdep->fpreg_type. |
| |
| * gdb/m68k-tdep.c (m68k_dwarf_reg_to_regnum): New. |
| (m68k_gdbarch_init): Set it for dwarf & dwarf2 reg number |
| conversion. Use M68K_NUM_REGS for number of regs. |
| |
| * gdb/configure.tgt (gdb_osabi): uclinux is like linux. |
| * gdb/m68k-tdep.c (m68k_svr4_extract_return_value): Return value |
| is never in %a0. |
| (m68k_reg_struct_return_p): Duplicate gcc's struct mode algorithm. |
| (m68k_svr4_return_value) Use VALUE_STRUCT_CONVENTION. do not rely |
| on %a0. |
| (m68k_push_dummy_call): Force stack alignment. |
| (m68k_svr4_init_abi): Set struct_return convention. |
| (m68k_aout_init_abi): New. |
| (m68k_gdbarch_init): Default to bare elf ABI that gcc provides. |
| * gdb/m68k-tdep.h (m68k_aout_init_abi): Declare. |
| * gdb/m68kbsd-tdep.c (m68kbsd_aout_init_abi): Use m68k_aout_init_abi. |
| (m68kbsd_elf_init_abi): Add comment. |
| * gdb/m68klinux-tdep.c (m68k_linux_init_abi): Just set the struct |
| pointer register here. |
| |
| 2006-06-01 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/breakpoint.c (insert_bp_location): Remember the failing |
| watchpoint address and pass to remove_breakpoint. |
| (remove_breakpoints, remove_hw_watchpoints, reattach_breakpoints, |
| detach_breakpoints): Adjust remove_breakpoint call. |
| (remove_breakpoint): Add VAL_FAILED parameter. Stop removing |
| watchpoint addresses when it is reached. |
| (delete_breakpoint): Adjust remove_breakpoint call. |
| |
| 2006-05-24 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/remote-fileio.c (remote_fileio_reset): New. |
| * gdb/remote-fileio.h (remote_fileio_reset): Prototype. |
| * gdb/remote.c (extended_remote_restart, remote_open_1): Call it. |
| |
| 2006-05-22 Richard Sandiford <richard@codesourcery.com> |
| |
| opcodes/ |
| * m68k-dis.c (m68k_scan_mask): Add missing return. |
| |
| 2006-05-08 Richard Sandiford <richard@codesourcery.com> |
| |
| include/opcodes/ |
| * m68k.h (mcf_mask): Define. |
| |
| opcodes/ |
| * m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd |
| and fmovem entries. Put register list entries before immediate |
| mask entries. Use "l" rather than "L" in the fmovem entries. |
| * m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it |
| out from INFO. |
| (m68k_scan_mask): New function, split out from... |
| (print_insn_m68k): ...here. If no architecture has been set, |
| first try printing an m680x0 instruction, then try a Coldfire one. |
| |
| 2006-05-03 Paul Brook <paul@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/testsuite/gdb.cp/gdb1355.exp: Accept different spellings of |
| integer types. |
| * gdb/testsuite/gdb.cp/gdb1355.cc: Ensure all types are referenced. |
| * gdb/testsuite/gdb.cp/hang2.C: Ditto. |
| * gdb/testsuite/gdb.cp/m-data.cc: Ditto. |
| * gdb/testsuite/gdb.cp/hang3.C: Ditto. |
| * gdb/testsuite/gdb.cp/hang1.C: Ditto. |
| |
| * gdb/gdbtypes.c (rank_one_type): Check for plain char -> signed/ |
| unsigned char. |
| |
| * gdb/testsuite/gdb.base/completion.exp: Accept "long" as a type. |
| |
| * gdb/testsuite/gdb.base/volatile.exp: Accept different spellings of |
| integer types. |
| * gdb/testsuite/gdb.base/constvars.c: Ensure all types are referenced. |
| |
| * gdb/testsuite/gdb.stabs/weird.exp: Return -1 instead of issuing |
| error. |
| |
| * gdb/testsuite/gdb.base/advance.c: Add proper function prototype. |
| |
| * gdb/testsuite/gdb.base/ending-run.exp: Add case for ARM runtime. |
| |
| * gdb/testsuite/gdb.base/gdb1821.c: Ensure all types are referenced. |
| |
| * gdb/testsuite/gdb.base/ptype.exp: Accept different spellings of |
| integer types. |
| |
| * gdb/testsuite/gdb.cp/inherit.exp: Cope with armcc vtable pointers. |
| |
| * gdb/testsuite/gdb.mi/mi2-var-child.exp: Accept different spellings |
| of integer types. |
| * gdb/testsuite/gdb.mi/mi-var-display.exp: Ditto. |
| * gdb/testsuite/gdb.mi/mi2-var-display.exp: Ditto. |
| * gdb/testsuite/gdb.mi/mi2-var-cmd.exp: Ditto. |
| |
| 2006-05-03 Paul Brook <paul@codesourcery.com> |
| |
| * arm-linux-tdep.c (arm_linux_extract_return_value): Use gdb_byte. |
| |
| 2006-05-03 Paul Brook <paul@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/c-valprint.c: Handle class member typedefs. |
| |
| * gdb/symtab.c (skip_prologue_using_sal): Treat two consecutive lines |
| at the same address as a prolouge marker. |
| * gdb/arm-tdep.c (arm_skip_prologue): Use skip_prologue_using_sal. |
| |
| * gdb/dwarf2expr.c (execute_stack_op): Check for bogus DW_OP_reg. |
| |
| * gdb/dwarf2read.c (read_structure_type): Use tag name for C++/Java |
| classes. |
| |
| * Makefile.in (eval.o): Update dependencies. |
| * eval.c: Include "ui-out.h" and "exceptions.h". |
| (evaluate_subexp_standard): Use TRY_CATCH around value_of_variable. |
| Use value_zero if an error occurs when avoiding side effects. |
| * varobj.c (varobj_create): Call release_value after evaluate_type. |
| (c_value_of_root): Initialize new_val. Don't release_value a NULL |
| value. |
| |
| * gdb/c-typeprint.c (cp_type_print_method_args): Don't print type |
| details. |
| |
| * gdb/dwarf2read.c (dwarf2_debug_line_missing_file_complaint): New |
| function. |
| (dwarf_decode_lines): Check for line info without a file. |
| |
| 2006-05-03 Paul Brook <paul@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/dwarf2read.c (read_subroutine_type): Add armcc workaround. |
| |
| * gdb/dwarf2read.c (read_structure_type): Look for ADS vtable |
| pointers. |
| |
| * gdb/dwarf2read.c (dwarf_decode_lines): Don't set dir for absolute |
| paths. |
| (dwarf_decode_lines): Ditto. |
| (dwarf2_start_subfile): Split absolute filenames into path+file. |
| |
| * gdb/symtab.h (struct symbol): Add is_argument. |
| (SYMBOL_IS_ARGUMENT): Define. |
| * gdb/stack.c (print_frame_args): Use SYMBOL_IS_ARGUMENT. |
| (print_frame_arg_vars): Ditto. |
| * gdb/dwarf2read.c (new_symbol): Set SYMBOL_IS_ARGUMENT. |
| (new_symbol): Mark optimized out arguments. |
| |
| * gdb/dwarf2read.c (partial_read_comp_unit_head): Accept version 3. |
| |
| * gdb/dwarf2read.c (read_unspecified_type): New function. |
| (read_type_die): Handle DW_TAG_unspecified_type. |
| |
| 2006-05-03 Paul Brook <paul@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/dwarf2read.c (field_info): Add baseclasses. |
| (dwarf2_add_field): Check base classes. |
| (dwarf2_attach_fields_to_type): Ditto. |
| |
| * gdb/gnu-v3-abi.c (gnuv3_rtti_type): Check for NULL base_type. |
| (gnuv3_virtual_fn_field): Handle missing base. |
| (gnuv3_baseclass_offset): Handle missing vptr. |
| * gdb/varobj.c (cplus_class_num_children): Call fill_in_vptr_fieldno. |
| (cplus_name_of_child): Ditto. |
| * gdb/eval.c (evaluate_subexp_standard): Ditto. |
| * gdb/dwarf2read.c (read_structure_type): Search for vtable pointer |
| by name in objects built by ARM compiler. |
| |
| * gdb/dwarf2read.c (dwarf2_add_member_fn): Calculate virtual function |
| offset for classes without DW_AT_containing_type. |
| |
| 2006-04-28 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/mt-tdep.c (mt_register_name): Correct out-of-range logic to |
| include additional registers. |
| |
| 2006-04-28 Richard Sandiford <richard@codesourcery.com> |
| |
| * gdb/gdbserver/configure.srv (m68k*-*-linux*): Use reg-cf.o. |
| |
| 2006-04-19 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/doc/gdb.texinfo (Remote configuration): Mention "set remote |
| load-offsets". |
| (General Query Packets): Document qPartInfo. |
| |
| 2006-04-18 Mark Mitchell <mark@codesourcery.com> |
| |
| Issue #655 |
| * gdb/mt-tdep.c (mt_gdb_regnums): Add ZI2, ZQ2, Ichannel2, |
| Iscramb2, Qscramb2, Qchannel2. |
| (mt_register_name): Likewise. |
| (mt_copro_register_type): Describe ZI2 and ZQ2. |
| |
| 2006-04-11 Mark Mitchell <mark@codesourcery.com> |
| |
| Issue #658 |
| * gdb/mt-tdep.c (mt_gdb_regnums): Define |
| MT_COPRO_PSEUDOREG_MAC_REGNUM. |
| (mt_register_name): Use it. |
| (mt_copro_register_type): Likewise. |
| (mt_register_type): Likewise. |
| (mt_pseudo_register_read): Likewise. Read the MAC register, not |
| the coprocessor register. |
| (mt_pseudo_register_write): Likewise. |
| |
| 2006-04-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * bfd/cpu-arm.c (bfd_is_arm_mapping_symbol_name): Accept more |
| mapping symbols. |
| |
| 2006-04-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Backport: |
| 2006-03-09 Paul Brook <paul@codesourcery.com> |
| * bfd/cpu-arm.c (bfd_is_arm_mapping_symbol_name): Recognise additional |
| mapping symbols. |
| |
| 2006-04-02 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.def (host_modules, dependencies): Add expat. |
| * configure.in (host_libs): Add expat. |
| * Makefile.in, configure: Regenerate. |
| * expat: New directory. |
| |
| * gdb/Makefile.in: Add expat, new files, and xml-builtin.c. Update |
| dependencies. |
| * gdb/acinclude.m4: Include stdint.m4. |
| * gdb/configure.ac: Use AC_C_BIGENDIAN and GCC_HEADER_STDINT. |
| * gdb/aclocal.m4, gdb/config.in, gdb/configure: Regenerate. |
| |
| * gdb/auxv.h: Remove target_auxv_read prototype. |
| * gdb/auxv.c, gdb/avr-tdep.c, gdb/ia64-tdep.c, gdb/linux-nat.c, |
| gdb/procfs.c: Use target_read_whole. |
| * gdb/sparc-tdep.c: Use target_read. |
| |
| * gdb/frame.c: Work around null frame_id handling. |
| |
| * gdb/breakpoint.c, gdb/f-valprint.c, gdb/infcmd.c, gdb/inflow.c, |
| gdb/infrun.c, gdb/stack.c, gdb/valops.c, gdb/varobj.c, |
| gdb/cli-cmds.c, gdb/testsuite/gdb.base/default.exp, |
| gdb/tui/tui-disasm.c, gdb/tui/tui-source.c, |
| gdb/tui/tui-winsource.c: Selected frame fixups. |
| |
| * gdb/README.AVAIL, gdb/available.c, gdb/available.h, |
| gdb/parse-avail.c, gdb/sha1.c, gdb/features/feature_to_c.sh, |
| gdb/features/gdb-target.dtd: New files. |
| * gdb/arm-tdep.c: Handle missing FPA, present VFP, and |
| self-described registers. Decode VFP register numbers from DWARF. |
| * gdb/arm-tdep.h: Add flags for VFP and FPA. |
| * gdb/gdbarch.sh: Add available_features_support and feature_set. |
| Export the arch's obstack. Check feature sets. Improve error |
| handling. |
| * gdb/gdbarch.c, gdb/gdbarch.h: Regenerated. |
| * gdb/infcmd.c: Trigger architecture selection. |
| * gdb/remote.c: Available feature support. qPacketInfo support. |
| Improved g/G packet support. Improved qPart support. |
| qPart:features support. |
| * gdb/symfile.c: Adjust download_write_size. |
| * gdb/target.c: Revise partial transfer support. Handle available |
| features method. Add target_read_whole. |
| * gdb/target.h: Add the available features object and methods. |
| * gdb/doc/gdb.texinfo: Document new features. |
| |
| * gdb/symfile.h: Include symtab.h. |
| |
| 2006-03-31 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/config/m68k/monitor.mt (TDEPFILES): Remove unneeded |
| monitors. |
| (DEPRECATED_TM_FILE): Remove. |
| |
| * gdb/m68k-tdep.c (M68K_FPREG_SIZE): Define. |
| (REGISTER_BYTES_FP): Use it. |
| |
| * gdb/configure.tgt (m68k-*-uclinux*): target is linux. |
| |
| * gdb/remote.c (remote_fetch_registers): Revert bogus change. |
| |
| * gdb/remote.c (remote_fetch_registers): Don't warn about short |
| register packet if we've not set the expected value. |
| |
| * gdb/gdbserver/linux-low.c (linux_read_offsets): Remove debugging |
| printf. |
| |
| * gdb/gdbserver/Makefile.in (reg-cf.o, reg-cf.c): New targets. |
| * gdb/gdbserver/configure.srv (m68k*-*-uclinux*): New target. |
| * gdb/gdbserver/linux-low.c (linux_create_inferior): Use vfork on |
| mmuless systems. |
| (linux_resume_one_process): Remove extraneous cast. |
| (linux_read_offsets): New. |
| (linux_target_op): Add linux_read_offsets on mmuless systems. |
| * gdb/gdbserver/server.c (handle_query): Add qOffsets logic. |
| * gdb/gdbserver/target.h (struct target_ops): Add read_offsets. |
| |
| 2006-03-30 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/configure.ac: Add cygpath for mingw hosts. |
| * libiberty/configure: Rebuilt. |
| * libiberty/Makefile.in: Add cygpath. |
| * libiberty/cygpath.c: New. |
| |
| 2006-03-30 Paul Brook <paul@codesourcery.com> |
| |
| Backport form mainline. |
| * gdb/testsuite/gdb.mi/mi-until.exp: kfail broken until command. |
| * gdb/testsuite/gdb.mi/mi2-until.exp: Ditto. |
| |
| 2006-03-29 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/m68k-tdep.c (M68K_FPREG_TYPE, M68K_LONG_DOUBLE_FORMAT, |
| M68K_RETURN_FP0): New. Set for Coldfire. |
| (m68k_register_type, m68k_register_to_value, |
| m68k_svr4_extract_return_value, m68k_svr4_store_return_value, |
| m68k_gdbarch_init): Use them. |
| |
| 2006-03-21 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/ser-mingw.c (net_windows_state): Add mutex. |
| (net_windows_select_thread): Grab lock around access to |
| read_event. |
| (net_windows_wait_handle): Do not reset the read_event. |
| (net_windows_open): Create a mutex. |
| (net_windows_read_prim): New function. |
| (_initialize_ser_windows): Use it. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/pex-common.c (pex_run): Close the write end of the |
| pipe after starting the child. |
| |
| * gdb/config/arm/armv7m.mt (TDEPFILES): Add prologue-value.o. |
| |
| 2006-03-21 Paul Brook <paul@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| Jim Blandy <jimb@codesourcery.com> |
| |
| * gdb/Makefile.in: Add prologue_value.{c,h} |
| * gdb/arm-tdep.c: Include prologue-value.h. |
| (thumb_skip_prologue): Remove. |
| (thumb_analyze_prologue): New function. |
| (arm_skip_prologue): Use thumb_analyze_prologue. |
| (thumb_scan_prologue): Ditto. |
| * gdb/prologue-value.c: New file. |
| * gdb/prologue-value.h: New file. |
| * gdb/config/arm/embed.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/config/arm/linux.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/config/arm/nbsd.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/config/arm/wince.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/testsuite/gdb.arch/thumb-prologue.c: New file. |
| * gdb/testsuite/gdb.arch/thumb-prologue.exp: New file. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * configure.tgt (arm*-stellaris-*): Use armv7m configuration. |
| * config/arm/armv7m.mt: New file. |
| * config/arm/tm-armv7m.h: Likewise. |
| * arm-tdep.c (arm_register_name_strings): Use xPSR on ARM V7M. |
| (arm_pc_is_thumb): ARM V7M is always Thumb. |
| (set_disassembly_style): Use xPSR on ARM V7M. |
| (arm_write_pc): Do not set T bit in CSPR on V7M. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/pex-win32.c (<errno.h>): Include. |
| (fix_argv): Remove. |
| (argv_to_cmdline): New function. |
| (std_suffixes): New variable. |
| (no_suffixes): Likewise. |
| (find_executable): New function. |
| (win32_spawn): Likewise. |
| (spawn_script): Use win32_spawn instead of _spawnv[p]. |
| (pex_win32_exec_child): Replace MSVCRT calls with Win32 API calls. |
| (pex_win32_wait): Likewise. |
| |
| 2006-03-19 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/ser-mingw.c (free_pipe_state): Close pipe before calling |
| pex_free. |
| |
| 2006-03-17 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/config/arm/embed.mt (TDEPFILES): Remove remote-rdp.o. |
| |
| 2006-03-17 Jim Blandy <jimb@codesourcery.com> |
| |
| Add support for 'target remote |' on MinGW. |
| * gdb/ser-mingw.c (struct pipe_state): New structure. |
| (make_pipe_state, free_pipe_state, cleanup_pipe_state) |
| (pipe_windows_open, pipe_windows_close, pipe_windows_read) |
| (pipe_windows_write, pipe_wait_handle): New functions. |
| (_initialize_ser_windows): Register a "pipe" interface based on |
| them. |
| |
| * libiberty/pex-common.c (pex_write_input): New function. |
| * libiberty/pexecute.txh (pex_write_input): Document it. |
| * libiberty/pex-common.h (struct pex_funcs): New function ptr fdopenw. |
| * libiberty/pex-unix.c (pex_unix_fdopenw): New function. |
| (funcs): List it as our fdopenw function. |
| * libiberty/pex-win32.c (pex_win32_fdopenw): New function. |
| (funcs): List it as our fdopenw function. |
| * libiberty/pex-djgpp.c (funcs): Leave fdopenw null. |
| * libiberty/pex-msdos (funcs): Same. |
| * libiberty/functions.texi: Regenerated. |
| |
| * include/libiberty.h (pex_write_input): New declaration. |
| |
| * libiberty/pex-common.h (struct pex_obj): Doc fixes. |
| |
| * libibery/functions.texi: Regenerate. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/gdb_proc_service.h (paddr_t): Use psaddr_t if available. |
| * gdb/proc-service.c (ps_xfer_memory): Cast paddr_t to unsigned |
| long. |
| (ps_pglobal_lookup): Cast CORE_ADDR to paddr_t. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/gdbserver/linux-mips-low.c: Include <sys/ptrace.h> and |
| "gdb_proc_service.h". |
| (PTRACE_GET_THREAD_AREA): Define. |
| (ps_get_thread_area): New function. |
| * gdb/gdbserver/Makefile.in (linux-i386-low.o, linux-mips-low.o) |
| (linux-x86-64-low.o): Update. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/gdbserver/configure.ac: Remove checks for prfpregset_t. |
| * gdb/gdbserver/gdb_proc_service.h: New file. |
| * gdb/gdbserver/linux-i386-low.c, gdb/gdbserver/linux-x86-64-low.c, |
| gdb/gdbserver/thread-db.c: Use the new "gdb_proc_service.h". |
| * gdb/gdbserver/proc-service.c: Likewise. |
| (ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t. |
| (ps_lgetfpregs, ps_lsetfpregs): Use a void* argument. |
| * gdb/gdbserver/Makefile.in (gdb_proc_service_h): Updated. |
| * gdb/gdbserver/configure, config.in: Regenerated. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/Makefile.in (mips_linux_tdep_h): New. |
| (mpis-linux-nat.o, mips-linux-tdep.o): Update. |
| * gdb/mips-linux-nat.c: Include "inferior.h", "mips-linux-tdep.h", and |
| <sys/ptrace.h>. |
| (have_ptrace_regsets, super_fetch_registers, super_store_registers) |
| (mips64_linux_regsets_fetch_registers) |
| (mips64_linux_regsets_store_registers, mips64_linux_fetch_registers) |
| (mips64_linux_store_registers): New. |
| (_initialize_mips_linux_nat): Override to_fetch_registers and |
| to_store_registers. |
| * gdb/mips-linux-tdep.h: New file. |
| * gdb/mips-linux-tdep.c: Include "mips-linux-tdep.c". |
| (ELF_NGREG, ELF_NFPREG, elf_greg_t, elf_gregset_t, elf_fpreg_t) |
| (elf_fpregset_t, FPR_BASE, PC, CAUSE, BADVADDR, MMHI, MMLO) |
| (FPC_CSR, FPC_EIR, EF_REG0, EF_REG31, EF_LO, EF_HI, EF_CP0_EPC) |
| (EF_CP0_BADVADDR, EF_CP0_STATUS, EF_CP0_CAUSE, EF_SIZE) |
| (MIPS64_ELF_NGREG, MIPS64_ELF_NFPREG, mips64_elf_greg_t) |
| (mips64_elf_gregset_t, mips64_elf_fpreg_t, mips64_elf_fpregset_t) |
| (MIPS64_FPR_BASE, MIPS64_PC, MIPS64_CAUSE, MIPS64_BADVADDR) |
| (MIPS64_MMHI, MIPS64_MMLO, MIPS64_FPC_CSR, MIPS64_FPC_EIR) |
| (MIPS64_EF_REG0, MIPS64_EF_REG31, MIPS64_EF_LO, MIPS64_EF_HI) |
| (MIPS64_EF_CP0_EPC, MIPS64_EF_CP0_BADVADDR, MIPS64_EF_CP0_STATUS) |
| (MIPS64_EF_CP0_CAUSE, MIPS64_EF_SIZE): Delete. |
| (supply_32bit_reg): Use gdb_byte. |
| (supply_64bit_reg): New. |
| (mips_supply_gregset, mips_fill_gregset, mips_supply_fpregset) |
| (mips_fill_fpregset, fetch_core_registers, supply_gregset) |
| (fill_gregset, supply_fpregset): Update for renamed types. |
| (mips64_supply_gregset): Use gdb_byte and supply_64bit_reg. |
| (mips64_fill_gregset): Make global. Handle 32-bit register |
| sizes. |
| (mips64_fill_fpregset): Make global. Use gdb_byte. Handle |
| FP regsets properly. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-linux-tdep.c (mips_supply_gregset): Renamed from supply_gregset. |
| (mips_fill_gregset): Renamed from fill_gregset. |
| (mips_supply_fpregset): Renamed from supply_fpregset. |
| (mips_fill_fpregset): Renamed from fill_fpregset. |
| (fetch_core_registers): Update calls. |
| (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): New |
| functions. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-tdep.c (mips_gdbarch_init): Default 64-bit ELF files to N64. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-tdep.c (is_mips16_addr, mips32_next_pc, add_offset_16): |
| Correct arithmetic for 64-bit CORE_ADDR. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-linux-tdep.c: Include "floatformat.h". |
| (mips_linux_init_abi): Use 128-bit long double for N32 and N64. |
| (mips_n32n64_return_value): Support 128-bit long double. |
| (print_gp_register_row): Don't print spaces before ignored |
| or floating point registers. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-mdebug-tdep.c (compare_pdr_entries): Use bfd_get_signed_32 |
| for code addresses. |
| (non_heuristic_proc_desc): Likewise. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-linux-nat.c: Include "gdb_proc_service.h". |
| (PTRACE_GET_THREAD_AREA): Define. |
| (ps_get_thread_area): New. |
| * gdb/Makefile.in (mips-linux-nat.o): Update. |
| |
| 2006-03-08 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb/arm-tdep.c (arm_push_dummy_call): Remove stack alignment. |
| (arm_frame_align): New function. |
| (arm_gdbarch_init): Use it. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb/testsuite/gdb.base/assign.exp: Correct fail message. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * sim/arm/elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb/testsuite/lib/compiler.c: Extract armcc version number. |
| * gdb/testsuite/lib/compiler.cc: Ditto. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| 2006-03-03 Khem Raj <khem@mvista.com> |
| * remote-rdp.c (remote_rdp_xfer_inferior_memory): Use gdb_byte. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb.arch/altivec-abi.exp: Use nowarnings instead of |
| additional_flags=-w. |
| * gdb.arch/altivec-regs.exp: Ditto. |
| * gdb.arch/e500-abi.exp: Ditto. |
| * gdb.arch/e500-regs.exp: Ditto. |
| * gdb.base/all-bin.exp: Ditto. |
| * gdb.base/annota1.exp: Ditto. |
| * gdb.base/annota3.exp: Ditto. |
| * gdb.base/args.exp: Ditto. |
| * gdb.base/arithmet.exp: Ditto. |
| * gdb.base/assign.exp: Ditto. |
| * gdb.base/async.exp: Ditto. |
| * gdb.base/bang.exp: Ditto. |
| * gdb.base/break.exp: Ditto. |
| * gdb.base/call-rt-st.exp: Ditto. |
| * gdb.base/completion.exp: Ditto. |
| * gdb.base/cond-expr.exp: Ditto. |
| * gdb.base/condbreak.exp: Ditto. |
| * gdb.base/consecutive.exp: Ditto. |
| * gdb.base/define.exp: Ditto. |
| * gdb.base/display.exp: Ditto. |
| * gdb.base/ena-dis-br.exp: Ditto. |
| * gdb.base/environ.exp: Ditto. |
| * gdb.base/eval-skip.exp: Ditto. |
| * gdb.base/info-proc.exp: Ditto. |
| * gdb.base/jump.exp: Ditto. |
| * gdb.base/logical.exp: Ditto. |
| * gdb.base/long_long.exp: Ditto. |
| * gdb.base/maint.exp: Ditto. |
| * gdb.base/miscexprs.exp: Ditto. |
| * gdb.base/pc-fp.exp: Ditto. |
| * gdb.base/pointers.exp: Ditto. |
| * gdb.base/relational.exp: Ditto. |
| * gdb.base/reread.exp: Ditto. |
| * gdb.base/sect-cmd.exp: Ditto. |
| * gdb.base/sep.exp: Ditto. |
| * gdb.base/sepdebug.exp: Ditto. |
| * gdb.base/until.exp: Ditto. |
| * gdb.base/whatis-exp.exp: Ditto. |
| * gdb.cp/annota2.exp: Ditto. |
| * gdb.cp/annota3.exp: Ditto. |
| * gdb.trace/actions.exp: Ditto. |
| * gdb.trace/backtrace.exp: Ditto. |
| * gdb.trace/circ.exp: Ditto. |
| * gdb.trace/collection.exp: Ditto. |
| * gdb.trace/deltrace.exp: Ditto. |
| * gdb.trace/infotrace.exp: Ditto. |
| * gdb.trace/limits.exp: Ditto. |
| * gdb.trace/packetlen.exp: Ditto. |
| * gdb.trace/passc-dyn.exp: Ditto. |
| * gdb.trace/passcount.exp: Ditto. |
| * gdb.trace/report.exp: Ditto. |
| * gdb.trace/save-trace.exp: Ditto. |
| * gdb.trace/tfind.exp: Ditto. |
| * gdb.trace/tracecmd.exp: Ditto. |
| * gdb.trace/while-dyn.exp: Ditto. |
| * gdb.trace/while-stepping.exp: Ditto. |
| * lib/gdb.exp: Ditto. |
| (gdb_compile): Handle nowarning option. |
| |
