| 2011-09-21 David S. Miller <davem@davemloft.net> |
| |
| * sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag |
| bits. Fix "fchksm16" mnemonic. |
| |
| 2011-09-08 Mark Fortescue <mark@mtfhpc.demon.co.uk> |
| |
| The changes below bring 'mov' and 'ticc' instructions into line |
| with the V8 SPARC Architecture Manual. |
| * sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'. |
| * sparc-opc.c (sparc_opcodes): Add alias entries for |
| 'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs'; |
| 'mov regrs2,%wim' and 'mov regrs2,%tbr'. |
| * sparc-opc.c (sparc_opcodes): Move/Change entries for |
| 'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim' |
| and 'mov imm,%tbr'. |
| * sparc-opc.c (sparc_opcodes): Add wr alias entries to match above |
| mov aliases. |
| |
| * sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd' |
| This has been reported as being accepted by the Sun assmebler. |
| |
| 2011-09-08 David S. Miller <davem@davemloft.net> |
| |
| * sparc-opc.c (pdistn): Destination is integer not float register. |
| |
| 2011-09-07 Andreas Schwab <schwab@linux-m68k.org> |
| |
| PR gas/13145 |
| * m68k-opc.c: Use "y" in moveml pattern for mcfisa_a. |
| |
| 2011-08-26 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| |
| 2011-08-22 Nick Clifton <nickc@redhat.com> |
| |
| * Makefile.am (CPUDIR): Redfine to point to top level cpu |
| directory. |
| (stamp-frv): Use CPUDIR. |
| (stamp-iq2000): Likewise. |
| (stamp-lm32): Likewise. |
| (stamp-m32c): Likewise. |
| (stamp-mt): Likewise. |
| (stamp-xc16x): Likewise. |
| * Makefile.in: Regenerate. |
| |
| 2011-08-09 Chao-ying Fu <fu@mips.com> |
| Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2" |
| and "mips64r2". |
| (print_insn_args, print_insn_micromips): Handle MCU. |
| * micromips-opc.c (MC): New macro. |
| (micromips_opcodes): Add "aclr", "aset" and "iret". |
| * mips-opc.c (MC): New macro. |
| (mips_builtin_opcodes): Add "aclr", "aset" and "iret". |
| |
| 2011-08-09 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros. |
| (MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise. |
| (MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise. |
| (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros. |
| (RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise. |
| (RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise. |
| (WR_s): Update macro. |
| (micromips_opcodes): Update register use flags of: "addiu", |
| "addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu", |
| "and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j", |
| "jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li", |
| "lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not", |
| "nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw", |
| "swm" and "xor" instructions. |
| |
| 2011-08-05 David S. Miller <davem@davemloft.net> |
| |
| * sparc-dis.c (v9a_ast_reg_names): Add "cps". |
| (X_RS3): New macro. |
| (print_insn_sparc): Handle '4', '5', and '(' format codes. |
| Accept %asr numbers below 28. |
| * sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3 |
| instructions. |
| |
| 2011-08-02 Quentin Neill <quentin.neill@amd.com> |
| |
| * i386-dis.c (xop_table): Remove spurious bextr insn. |
| |
| 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/13048 |
| * i386-dis.c (print_insn): Optimize info->mach check. |
| |
| 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/13046 |
| * i386-opc.tbl: Add Disp32S to 64bit call. |
| * i386-tbl.h: Regenerated. |
| |
| 2011-07-24 Chao-ying Fu <fu@mips.com> |
| Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * micromips-opc.c: New file. |
| * mips-dis.c (micromips_to_32_reg_b_map): New array. |
| (micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise. |
| (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise. |
| (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise. |
| (micromips_to_32_reg_q_map): Likewise. |
| (micromips_imm_b_map, micromips_imm_c_map): Likewise. |
| (micromips_ase): New variable. |
| (is_micromips): New function. |
| (set_default_mips_dis_options): Handle microMIPS ASE. |
| (print_insn_micromips): New function. |
| (is_compressed_mode_p): Likewise. |
| (_print_insn_mips): Handle microMIPS instructions. |
| * Makefile.am (CFILES): Add micromips-opc.c. |
| * configure.in (bfd_mips_arch): Add micromips-opc.lo. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| |
| * mips-dis.c (micromips_to_32_reg_h_map): New variable. |
| (micromips_to_32_reg_i_map): Likewise. |
| (micromips_to_32_reg_m_map): Likewise. |
| (micromips_to_32_reg_n_map): New macro. |
| |
| 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * mips-opc.c (NODS): New macro. |
| (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. |
| (DSP_VOLA): Likewise. |
| (mips_builtin_opcodes): Add NODS annotation to "deret" and |
| "eret". Replace INSN_SYNC with NODS throughout. Use NODS in |
| place of TRAP for "wait", "waiti" and "yield". |
| * mips16-opc.c (NODS): New macro. |
| (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. |
| (mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc", |
| "restore" and "save". |
| |
| 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.in: Handle bfd_k1om_arch. |
| * configure: Regenerated. |
| |
| * disassemble.c (disassembler): Handle bfd_k1om_arch. |
| |
| * i386-dis.c (print_insn): Handle bfd_mach_k1om and |
| bfd_mach_k1om_intel_syntax. |
| |
| * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to |
| ~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS. |
| (cpu_flags): Add CpuK1OM. |
| |
| * i386-opc.h (CpuK1OM): New. |
| (i386_cpu_flags): Add cpuk1om. |
| |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2011-07-12 Nick Clifton <nickc@redhat.com> |
| |
| * arm-dis.c (print_insn_arm): Revert previous, undocumented, |
| accidental change. |
| |
| 2011-07-01 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/12329 |
| * avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM |
| insns using post-increment addressing. |
| |
| 2011-06-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (vex_len_table): Update rorxS. |
| |
| 2011-06-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| AVX Programming Reference (June, 2011) |
| * i386-dis.c (vex_len_table): Correct rorxS. |
| |
| * i386-opc.tbl: Correct rorx. |
| * i386-tbl.h: Regenerated. |
| |
| 2011-06-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * tilegx-opc.c (find_opcode): Replace "index" with "i". |
| * tilepro-opc.c (find_opcode): Likewise. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * mips16-opc.c (jalrc, jrc): Move earlier in file. |
| |
| 2011-06-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and |
| PREFIX_VEX_0F388E. |
| |
| 2011-06-17 Andreas Schwab <schwab@redhat.com> |
| |
| * Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ... |
| (MOSTLYCLEANFILES): ... here. |
| * Makefile.in: Regenerate. |
| |
| 2011-06-14 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in: Regenerate. |
| |
| 2011-06-13 Walter Lee <walt@tilera.com> |
| |
| * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c, |
| tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c. |
| * Makefile.in: Regenerate. |
| * configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch. |
| * configure: Regenerate. |
| * disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro. |
| * po/POTFILES.in: Regenerate. |
| * tilegx-dis.c: New file. |
| * tilegx-opc.c: New file. |
| * tilepro-dis.c: New file. |
| * tilepro-opc.c: New file. |
| |
| 2011-06-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| AVX Programming Reference (June, 2011) |
| * i386-dis.c (XMGatherQ): New. |
| * i386-dis.c (EXxmm_mb): New. |
| (EXxmm_mb): Likewise. |
| (EXxmm_mw): Likewise. |
| (EXxmm_md): Likewise. |
| (EXxmm_mq): Likewise. |
| (EXxmmdw): Likewise. |
| (EXxmmqd): Likewise. |
| (VexGatherQ): Likewise. |
| (MVexVSIBDWpX): Likewise. |
| (MVexVSIBQWpX): Likewise. |
| (xmm_mb_mode): Likewise. |
| (xmm_mw_mode): Likewise. |
| (xmm_md_mode): Likewise. |
| (xmm_mq_mode): Likewise. |
| (xmmdw_mode): Likewise. |
| (xmmqd_mode): Likewise. |
| (ymmxmm_mode): Likewise. |
| (vex_vsib_d_w_dq_mode): Likewise. |
| (vex_vsib_q_w_dq_mode): Likewise. |
| (MOD_VEX_0F385A_PREFIX_2): Likewise. |
| (MOD_VEX_0F388C_PREFIX_2): Likewise. |
| (MOD_VEX_0F388E_PREFIX_2): Likewise. |
| (PREFIX_0F3882): Likewise. |
| (PREFIX_VEX_0F3816): Likewise. |
| (PREFIX_VEX_0F3836): Likewise. |
| (PREFIX_VEX_0F3845): Likewise. |
| (PREFIX_VEX_0F3846): Likewise. |
| (PREFIX_VEX_0F3847): Likewise. |
| (PREFIX_VEX_0F3858): Likewise. |
| (PREFIX_VEX_0F3859): Likewise. |
| (PREFIX_VEX_0F385A): Likewise. |
| (PREFIX_VEX_0F3878): Likewise. |
| (PREFIX_VEX_0F3879): Likewise. |
| (PREFIX_VEX_0F388C): Likewise. |
| (PREFIX_VEX_0F388E): Likewise. |
| (PREFIX_VEX_0F3890..PREFIX_VEX_0F3893): Likewise. |
| (PREFIX_VEX_0F38F5): Likewise. |
| (PREFIX_VEX_0F38F6): Likewise. |
| (PREFIX_VEX_0F3A00): Likewise. |
| (PREFIX_VEX_0F3A01): Likewise. |
| (PREFIX_VEX_0F3A02): Likewise. |
| (PREFIX_VEX_0F3A38): Likewise. |
| (PREFIX_VEX_0F3A39): Likewise. |
| (PREFIX_VEX_0F3A46): Likewise. |
| (PREFIX_VEX_0F3AF0): Likewise. |
| (VEX_LEN_0F3816_P_2): Likewise. |
| (VEX_LEN_0F3819_P_2): Likewise. |
| (VEX_LEN_0F3836_P_2): Likewise. |
| (VEX_LEN_0F385A_P_2_M_0): Likewise. |
| (VEX_LEN_0F38F5_P_0): Likewise. |
| (VEX_LEN_0F38F5_P_1): Likewise. |
| (VEX_LEN_0F38F5_P_3): Likewise. |
| (VEX_LEN_0F38F6_P_3): Likewise. |
| (VEX_LEN_0F38F7_P_1): Likewise. |
| (VEX_LEN_0F38F7_P_2): Likewise. |
| (VEX_LEN_0F38F7_P_3): Likewise. |
| (VEX_LEN_0F3A00_P_2): Likewise. |
| (VEX_LEN_0F3A01_P_2): Likewise. |
| (VEX_LEN_0F3A38_P_2): Likewise. |
| (VEX_LEN_0F3A39_P_2): Likewise. |
| (VEX_LEN_0F3A46_P_2): Likewise. |
| (VEX_LEN_0F3AF0_P_3): Likewise. |
| (VEX_W_0F3816_P_2): Likewise. |
| (VEX_W_0F3818_P_2): Likewise. |
| (VEX_W_0F3819_P_2): Likewise. |
| (VEX_W_0F3836_P_2): Likewise. |
| (VEX_W_0F3846_P_2): Likewise. |
| (VEX_W_0F3858_P_2): Likewise. |
| (VEX_W_0F3859_P_2): Likewise. |
| (VEX_W_0F385A_P_2_M_0): Likewise. |
| (VEX_W_0F3878_P_2): Likewise. |
| (VEX_W_0F3879_P_2): Likewise. |
| (VEX_W_0F3A00_P_2): Likewise. |
| (VEX_W_0F3A01_P_2): Likewise. |
| (VEX_W_0F3A02_P_2): Likewise. |
| (VEX_W_0F3A38_P_2): Likewise. |
| (VEX_W_0F3A39_P_2): Likewise. |
| (VEX_W_0F3A46_P_2): Likewise. |
| (MOD_VEX_0F3818_PREFIX_2): Removed. |
| (MOD_VEX_0F3819_PREFIX_2): Likewise. |
| (VEX_LEN_0F60_P_2..VEX_LEN_0F6D_P_2): Likewise. |
| (VEX_LEN_0F70_P_1..VEX_LEN_0F76_P_2): Likewise. |
| (VEX_LEN_0FD1_P_2..VEX_LEN_0FD5_P_2): Likewise. |
| (VEX_LEN_0FD7_P_2_M_1..VEX_LEN_0F3819_P_2_M_0): Likewise. |
| (VEX_LEN_0F381C_P_2..VEX_LEN_0F3840_P_2): Likewise. |
| (VEX_LEN_0F3A0E_P_2): Likewise. |
| (VEX_LEN_0F3A0F_P_2): Likewise. |
| (VEX_LEN_0F3A42_P_2): Likewise. |
| (VEX_LEN_0F3A4C_P_2): Likewise. |
| (VEX_W_0F3818_P_2_M_0): Likewise. |
| (VEX_W_0F3819_P_2_M_0): Likewise. |
| (prefix_table): Updated. |
| (three_byte_table): Likewise. |
| (vex_table): Likewise. |
| (vex_len_table): Likewise. |
| (vex_w_table): Likewise. |
| (mod_table): Likewise. |
| (putop): Handle "LW". |
| (intel_operand_size): Handle xmm_mb_mode, xmm_mw_mode, |
| xmm_md_mode, xmm_mq_mode, xmmdw_mode, xmmqd_mode, ymmxmm_mode, |
| vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode. |
| (OP_EX): Likewise. |
| (OP_E_memory): Handle vex_vsib_d_w_dq_mode and |
| vex_vsib_q_w_dq_mode. |
| (OP_XMM): Handle vex_vsib_q_w_dq_mode. |
| (OP_VEX): Likewise. |
| |
| * i386-gen.c (cpu_flag_init): Add CpuAVX2 to CPU_ANY_SSE_FLAGS |
| and CPU_ANY_AVX_FLAGS. Add CPU_BMI2_FLAGS, CPU_LZCNT_FLAGS, |
| CPU_INVPCID_FLAGS and CPU_AVX2_FLAGS. |
| (cpu_flags): Add CpuAVX2, CpuBMI2, CpuLZCNT and CpuINVPCID. |
| (opcode_modifiers): Add VecSIB. |
| |
| * i386-opc.h (CpuAVX2): New. |
| (CpuBMI2): Likewise. |
| (CpuLZCNT): Likewise. |
| (CpuINVPCID): Likewise. |
| (VecSIB128): Likewise. |
| (VecSIB256): Likewise. |
| (VecSIB): Likewise. |
| (i386_cpu_flags): Add cpuavx2, cpubmi2, cpulzcnt and cpuinvpcid. |
| (i386_opcode_modifier): Add vecsib. |
| |
| * i386-opc.tbl: Add invpcid, AVX2 and BMI2 instructions. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2011-06-03 Quentin Neill <quentin.neill@amd.com> |
| |
| * i386-gen.c (cpu_flag_init): Add CpuF16C to CPU_BDVER2_FLAGS. |
| * i386-init.h: Regenerated. |
| |
| 2011-06-03 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/12752 |
| * arm-dis.c (print_insn_coprocessor): Use bfd_vma type for |
| computing address offsets. |
| (print_arm_address): Likewise. |
| (print_insn_arm): Likewise. |
| (print_insn_thumb16): Likewise. |
| (print_insn_thumb32): Likewise. |
| |
| 2011-06-02 Jie Zhang <jie@codesourcery.com> |
| Nathan Sidwell <nathan@codesourcery.com> |
| Maciej Rozycki <macro@codesourcery.com> |
| |
| * arm-dis.c (print_insn_coprocessor): Explicitly print #-0 |
| as address offset. |
| (print_arm_address): Likewise. Elide positive #0 appropriately. |
| (print_insn_arm): Likewise. |
| |
| 2011-06-02 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12752 |
| * arm-dis.c (print_insn_thumb32): Do not sign extend addresses |
| passed to print_address_func. |
| |
| 2011-06-02 Nick Clifton <nickc@redhat.com> |
| |
| * arm-dis.c: Fix spelling mistakes. |
| * op/opcodes.pot: Regenerate. |
| |
| 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * s390-opc.c: Replace S390_OPERAND_REG_EVEN with |
| S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type. |
| * s390-opc.txt: Fix cxr instruction type. |
| |
| 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * s390-opc.c: Add new instruction types marking register pair |
| operands. |
| * s390-opc.txt: Match instructions having register pair operands |
| to the new instruction types. |
| |
| 2011-05-19 Nick Clifton <nickc@redhat.com> |
| |
| * v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2 |
| operands. |
| |
| 2011-05-10 Quentin Neill <quentin.neill@amd.com> |
| |
| * i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS. |
| * i386-init.h: Regenerated. |
| |
| 2011-04-27 Nick Clifton <nickc@redhat.com> |
| |
| * po/da.po: Updated Danish translation. |
| |
| 2011-04-26 Anton Blanchard <anton@samba.org> |
| |
| * ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7. |
| |
| 2011-04-21 DJ Delorie <dj@redhat.com> |
| |
| * rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs. |
| * rx-decode.c: Regenerate. |
| |
| 2011-04-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-init.h: Regenerated. |
| |
| 2011-04-19 Quentin Neill <quentin.neill@amd.com> |
| |
| * i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits |
| from bdver1 flags. |
| |
| 2011-04-13 Nick Clifton <nickc@redhat.com> |
| |
| * v850-dis.c (disassemble): Always print a closing square brace if |
| an opening square brace was printed. |
| |
| 2011-04-12 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/12534 |
| * arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn |
| patterns. |
| (print_insn_thumb32): Handle %L. |
| |
| 2011-04-11 Julian Brown <julian@codesourcery.com> |
| |
| * arm-dis.c (psr_name): Fix typo for BASEPRI_MAX. |
| (print_insn_thumb32): Add APSR bitmask support. |
| |
| 2011-04-07 Paul Carroll<pcarroll@codesourcery.com> |
| |
| * arm-dis.c (print_insn): init vars moved into private_data structure. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic. |
| |
| 2011-03-22 Eric B. Weddington <eric.weddington@atmel.com> |
| |
| * avr-dis.c (avr_operand): Add opcode_str parameter. Check for |
| post-increment to support LPM Z+ instruction. Add support for 'E' |
| constraint for DES instruction. |
| (print_insn_avr): Adjust calls to avr_operand. Rename variable. |
| |
| 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org> |
| |
| * arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code. |
| |
| 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org> |
| |
| * arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC. |
| Use branch types instead. |
| (print_insn): Likewise. |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Correct register use |
| annotation of "alnv.ps". |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Add "pref" macro. |
| |
| 2011-02-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (OUTS): Remove p NULL check and txt NUL check. |
| |
| 2011-02-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS. |
| |
| 2011-02-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (saved_state): Mark static. Change a[01]x to ax[] and |
| a[01]w to aw[]. Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1, |
| av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts, |
| exception, end_of_registers, msize, memory, bfd_mach. |
| (CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG, |
| LB0REG, LC1REG, LT1REG, LB1REG): Delete |
| (AXREG, AWREG, LCREG, LTREG, LBREG): Define. |
| (get_allreg): Change to new defines. Fallback to abort(). |
| |
| 2011-02-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c: Add whitespace/parenthesis where needed. |
| |
| 2011-02-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (decode_LoopSetup_0): Return when reg is greater |
| than 7. |
| |
| 2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2011-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg. |
| |
| 2011-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1. Output |
| dregs only when P is set, and dregs_lo otherwise. |
| |
| 2011-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code. |
| |
| 2011-02-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT. |
| |
| 2011-02-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (machine_registers): Delete REG_GP. |
| (reg_names): Delete "GP". |
| (decode_allregs): Change REG_GP to REG_LASTREG. |
| |
| 2011-02-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, |
| M_IH, M_IU): Delete. |
| |
| 2011-02-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (reg_names): Add const. |
| (decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte, |
| decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs, |
| decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits, |
| decode_counters, decode_allregs): Likewise. |
| |
| 2011-02-09 Michael Snyder <msnyder@vmware.com> |
| |
| * i386-dis.c (OP_J): Parenthesize expression to prevent |
| truncated addresses. |
| (print_insn): Fix indentation off-by-one. |
| |
| 2011-02-01 Nick Clifton <nickc@redhat.com> |
| |
| * po/da.po: Updated Danish translation. |
| |
| 2011-01-21 Dave Murphy <davem@devkitpro.org> |
| |
| * ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS. |
| |
| 2011-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (sIbT): New. |
| (b_T_mode): Likewise. |
| (dis386): Replace sIb with sIbT on "pushT". |
| (x86_64_table): Replace sIb with Ib on "aam" and "aad". |
| (OP_sI): Handle b_T_mode. Properly sign-extend byte. |
| |
| 2011-01-18 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Regenerated |
| |
| 2011-01-17 Quentin Neill <quentin.neill@amd.com> |
| |
| * i386-dis.c (REG_XOP_TBM_01): New. |
| (REG_XOP_TBM_02): New. |
| (reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables. |
| (xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02 |
| entries, and add bextr instruction. |
| |
| * i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM. |
| (cpu_flags): Add CpuTBM. |
| |
| * i386-opc.h (CpuTBM) New. |
| (i386_cpu_flags): Add bit cputbm. |
| |
| * i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk, |
| blcs, blsfill, blsic, t1mskc, and tzmsk. |
| |
| 2011-01-12 DJ Delorie <dj@redhat.com> |
| |
| * rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg. |
| |
| 2011-01-11 Mingjie Xing <mingjie.xing@gmail.com> |
| |
| * mips-dis.c (print_insn_args): Adjust the value to print the real |
| offset for "+c" argument. |
| |
| 2011-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * po/da.po: Updated Danish translation. |
| |
| 2011-01-05 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * arm-dis.c (thumb32_opcodes): BLX must have bit zero clear. |
| |
| 2011-01-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (REG_VEX_38F3): New. |
| (PREFIX_0FBC): Likewise. |
| (PREFIX_VEX_38F2): Likewise. |
| (PREFIX_VEX_38F3_REG_1): Likewise. |
| (PREFIX_VEX_38F3_REG_2): Likewise. |
| (PREFIX_VEX_38F3_REG_3): Likewise. |
| (PREFIX_VEX_38F7): Likewise. |
| (VEX_LEN_38F2_P_0): Likewise. |
| (VEX_LEN_38F3_R_1_P_0): Likewise. |
| (VEX_LEN_38F3_R_2_P_0): Likewise. |
| (VEX_LEN_38F3_R_3_P_0): Likewise. |
| (VEX_LEN_38F7_P_0): Likewise. |
| (dis386_twobyte): Use PREFIX_0FBC. |
| (reg_table): Add REG_VEX_38F3. |
| (prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2, |
| PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2, |
| PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7. |
| (vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and |
| PREFIX_VEX_38F7. |
| (vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0, |
| VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and |
| VEX_LEN_38F7_P_0. |
| |
| * i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS. |
| (cpu_flags): Add CpuBMI. |
| |
| * i386-opc.h (CpuBMI): New. |
| (i386_cpu_flags): Add cpubmi. |
| |
| * i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2011-01-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (VexGdq): New. |
| (OP_VEX): Handle dq_mode. |
| |
| 2011-01-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (process_copyright): Update copyright to 2011. |
| |
| For older changes see ChangeLog-2010 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
