2011-09-21  David S. Miller  <davem@davemloft.net>

	* sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag
	bits.  Fix "fchksm16" mnemonic.

2011-09-08  Mark Fortescue <mark@mtfhpc.demon.co.uk>

	The changes below bring 'mov' and 'ticc' instructions into line
	with the V8 SPARC Architecture Manual.
	* sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'.
	* sparc-opc.c (sparc_opcodes): Add alias entries for
	'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs';
	'mov regrs2,%wim' and 'mov regrs2,%tbr'.
	* sparc-opc.c (sparc_opcodes): Move/Change entries for
	'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim'
	and 'mov imm,%tbr'.
	* sparc-opc.c (sparc_opcodes): Add wr alias entries to match above
	mov aliases.

	* sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd'
	This has been reported as being accepted by the Sun assmebler.

2011-09-08  David S. Miller  <davem@davemloft.net>

	* sparc-opc.c (pdistn): Destination is integer not float register.

2011-09-07  Andreas Schwab  <schwab@linux-m68k.org>

	PR gas/13145
	* m68k-opc.c: Use "y" in moveml pattern for mcfisa_a.

2011-08-26  Nick Clifton  <nickc@redhat.com>

	* po/es.po: Updated Spanish translation.

2011-08-22  Nick Clifton  <nickc@redhat.com>

	* Makefile.am (CPUDIR): Redfine to point to top level cpu
	directory.
	(stamp-frv): Use CPUDIR.
	(stamp-iq2000): Likewise.
	(stamp-lm32): Likewise.
	(stamp-m32c): Likewise.
	(stamp-mt): Likewise.
	(stamp-xc16x): Likewise.
	* Makefile.in: Regenerate.

2011-08-09  Chao-ying Fu  <fu@mips.com>
            Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2"
	and "mips64r2".
	(print_insn_args, print_insn_micromips): Handle MCU.
	* micromips-opc.c (MC): New macro.
	(micromips_opcodes): Add "aclr", "aset" and "iret".
	* mips-opc.c (MC): New macro.
	(mips_builtin_opcodes): Add "aclr", "aset" and "iret".

2011-08-09  Maciej W. Rozycki  <macro@codesourcery.com>

	* micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros.
	(MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise.
	(MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise.
	(WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros.
	(RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise.
	(RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise.
	(WR_s): Update macro.
	(micromips_opcodes): Update register use flags of: "addiu",
	"addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu",
	"and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j",
	"jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li",
	"lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not",
	"nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw",
	"swm" and "xor" instructions.

2011-08-05  David S. Miller  <davem@davemloft.net>

	* sparc-dis.c (v9a_ast_reg_names): Add "cps".
	(X_RS3): New macro.
	(print_insn_sparc): Handle '4', '5', and '(' format codes.
	Accept %asr numbers below 28.
	* sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
	instructions.

2011-08-02  Quentin Neill  <quentin.neill@amd.com>

	* i386-dis.c (xop_table): Remove spurious bextr insn.

2011-08-01  H.J. Lu  <hongjiu.lu@intel.com>

	PR ld/13048
	* i386-dis.c (print_insn): Optimize info->mach check.

2011-08-01  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/13046
	* i386-opc.tbl: Add Disp32S to 64bit call.
	* i386-tbl.h: Regenerated.

2011-07-24  Chao-ying Fu  <fu@mips.com>
            Maciej W. Rozycki  <macro@codesourcery.com>

	* micromips-opc.c: New file.
	* mips-dis.c (micromips_to_32_reg_b_map): New array.
	(micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
	(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
	(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
	(micromips_to_32_reg_q_map): Likewise.
	(micromips_imm_b_map, micromips_imm_c_map): Likewise.
	(micromips_ase): New variable.
	(is_micromips): New function.
	(set_default_mips_dis_options): Handle microMIPS ASE.
	(print_insn_micromips): New function.
	(is_compressed_mode_p): Likewise.
	(_print_insn_mips): Handle microMIPS instructions.
	* Makefile.am (CFILES): Add micromips-opc.c.
	* configure.in (bfd_mips_arch): Add micromips-opc.lo.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

	* mips-dis.c (micromips_to_32_reg_h_map): New variable.
	(micromips_to_32_reg_i_map): Likewise.
	(micromips_to_32_reg_m_map): Likewise.
	(micromips_to_32_reg_n_map): New macro.

2011-07-24  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-opc.c (NODS): New macro.
	(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
	(DSP_VOLA): Likewise.
	(mips_builtin_opcodes): Add NODS annotation to "deret" and
	"eret". Replace INSN_SYNC with NODS throughout.  Use NODS in
	place of TRAP for "wait", "waiti" and "yield".
	* mips16-opc.c (NODS): New macro.
	(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
	(mips16_opcodes):  Use NODS in place of TRAP for "jalrc", "jrc",
	"restore" and "save".

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.in: Handle bfd_k1om_arch.
	* configure: Regenerated.

	* disassemble.c (disassembler): Handle bfd_k1om_arch.

	* i386-dis.c (print_insn): Handle bfd_mach_k1om and
	bfd_mach_k1om_intel_syntax.

	* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
	~(CpuL1OM|CpuK1OM).  Add CPU_K1OM_FLAGS.
	(cpu_flags): Add CpuK1OM.

	* i386-opc.h (CpuK1OM): New.
	(i386_cpu_flags): Add cpuk1om.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2011-07-12  Nick Clifton  <nickc@redhat.com>

	* arm-dis.c (print_insn_arm): Revert previous, undocumented,
	accidental change.

2011-07-01  Nick Clifton  <nickc@redhat.com>

	PR binutils/12329
	* avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM
	insns using post-increment addressing.

2011-06-30  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (vex_len_table): Update rorxS.

2011-06-30  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (June, 2011)
	* i386-dis.c (vex_len_table): Correct rorxS.

	* i386-opc.tbl: Correct rorx.
	* i386-tbl.h: Regenerated.

2011-06-29  H.J. Lu  <hongjiu.lu@intel.com>

	* tilegx-opc.c (find_opcode): Replace "index" with "i".
	* tilepro-opc.c (find_opcode): Likewise.

2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c (jalrc, jrc): Move earlier in file.

2011-06-21  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and
	PREFIX_VEX_0F388E.

2011-06-17  Andreas Schwab  <schwab@redhat.com>

	* Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ...
	(MOSTLYCLEANFILES): ... here.
	* Makefile.in: Regenerate.

2011-06-14  Alan Modra  <amodra@gmail.com>

	* Makefile.in: Regenerate.

2011-06-13  Walter Lee  <walt@tilera.com>

	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
	tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
	* Makefile.in: Regenerate.
	* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
	* configure: Regenerate.
	* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
	* po/POTFILES.in: Regenerate.
	* tilegx-dis.c: New file.
	* tilegx-opc.c: New file.
	* tilepro-dis.c: New file.
	* tilepro-opc.c: New file.

2011-06-10  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (June, 2011)
	* i386-dis.c (XMGatherQ): New.
	* i386-dis.c (EXxmm_mb): New.
	(EXxmm_mb): Likewise.
	(EXxmm_mw): Likewise.
	(EXxmm_md): Likewise.
	(EXxmm_mq): Likewise.
	(EXxmmdw): Likewise.
	(EXxmmqd): Likewise.
	(VexGatherQ): Likewise.
	(MVexVSIBDWpX): Likewise.
	(MVexVSIBQWpX): Likewise.
	(xmm_mb_mode): Likewise.
	(xmm_mw_mode): Likewise.
	(xmm_md_mode): Likewise.
	(xmm_mq_mode): Likewise.
	(xmmdw_mode): Likewise.
	(xmmqd_mode): Likewise.
	(ymmxmm_mode): Likewise.
	(vex_vsib_d_w_dq_mode): Likewise.
	(vex_vsib_q_w_dq_mode): Likewise.
	(MOD_VEX_0F385A_PREFIX_2): Likewise.
	(MOD_VEX_0F388C_PREFIX_2): Likewise.
	(MOD_VEX_0F388E_PREFIX_2): Likewise.
	(PREFIX_0F3882): Likewise.
	(PREFIX_VEX_0F3816): Likewise.
	(PREFIX_VEX_0F3836): Likewise.
	(PREFIX_VEX_0F3845): Likewise.
	(PREFIX_VEX_0F3846): Likewise.
	(PREFIX_VEX_0F3847): Likewise.
	(PREFIX_VEX_0F3858): Likewise.
	(PREFIX_VEX_0F3859): Likewise.
	(PREFIX_VEX_0F385A): Likewise.
	(PREFIX_VEX_0F3878): Likewise.
	(PREFIX_VEX_0F3879): Likewise.
	(PREFIX_VEX_0F388C): Likewise.
	(PREFIX_VEX_0F388E): Likewise.
	(PREFIX_VEX_0F3890..PREFIX_VEX_0F3893): Likewise.
	(PREFIX_VEX_0F38F5): Likewise.
	(PREFIX_VEX_0F38F6): Likewise.
	(PREFIX_VEX_0F3A00): Likewise.
	(PREFIX_VEX_0F3A01): Likewise.
	(PREFIX_VEX_0F3A02): Likewise.
	(PREFIX_VEX_0F3A38): Likewise.
	(PREFIX_VEX_0F3A39): Likewise.
	(PREFIX_VEX_0F3A46): Likewise.
	(PREFIX_VEX_0F3AF0): Likewise.
	(VEX_LEN_0F3816_P_2): Likewise.
	(VEX_LEN_0F3819_P_2): Likewise.
	(VEX_LEN_0F3836_P_2): Likewise.
	(VEX_LEN_0F385A_P_2_M_0): Likewise.
	(VEX_LEN_0F38F5_P_0): Likewise.
	(VEX_LEN_0F38F5_P_1): Likewise.
	(VEX_LEN_0F38F5_P_3): Likewise.
	(VEX_LEN_0F38F6_P_3): Likewise.
	(VEX_LEN_0F38F7_P_1): Likewise.
	(VEX_LEN_0F38F7_P_2): Likewise.
	(VEX_LEN_0F38F7_P_3): Likewise.
	(VEX_LEN_0F3A00_P_2): Likewise.
	(VEX_LEN_0F3A01_P_2): Likewise.
	(VEX_LEN_0F3A38_P_2): Likewise.
	(VEX_LEN_0F3A39_P_2): Likewise.
	(VEX_LEN_0F3A46_P_2): Likewise.
	(VEX_LEN_0F3AF0_P_3): Likewise.
	(VEX_W_0F3816_P_2): Likewise.
	(VEX_W_0F3818_P_2): Likewise.
	(VEX_W_0F3819_P_2): Likewise.
	(VEX_W_0F3836_P_2): Likewise.
	(VEX_W_0F3846_P_2): Likewise.
	(VEX_W_0F3858_P_2): Likewise.
	(VEX_W_0F3859_P_2): Likewise.
	(VEX_W_0F385A_P_2_M_0): Likewise.
	(VEX_W_0F3878_P_2): Likewise.
	(VEX_W_0F3879_P_2): Likewise.
	(VEX_W_0F3A00_P_2): Likewise.
	(VEX_W_0F3A01_P_2): Likewise.
	(VEX_W_0F3A02_P_2): Likewise.
	(VEX_W_0F3A38_P_2): Likewise.
	(VEX_W_0F3A39_P_2): Likewise.
	(VEX_W_0F3A46_P_2): Likewise.
	(MOD_VEX_0F3818_PREFIX_2): Removed.
	(MOD_VEX_0F3819_PREFIX_2): Likewise.
	(VEX_LEN_0F60_P_2..VEX_LEN_0F6D_P_2): Likewise.
	(VEX_LEN_0F70_P_1..VEX_LEN_0F76_P_2): Likewise.
	(VEX_LEN_0FD1_P_2..VEX_LEN_0FD5_P_2): Likewise.
	(VEX_LEN_0FD7_P_2_M_1..VEX_LEN_0F3819_P_2_M_0): Likewise.
	(VEX_LEN_0F381C_P_2..VEX_LEN_0F3840_P_2): Likewise.
	(VEX_LEN_0F3A0E_P_2): Likewise.
	(VEX_LEN_0F3A0F_P_2): Likewise.
	(VEX_LEN_0F3A42_P_2): Likewise.
	(VEX_LEN_0F3A4C_P_2): Likewise.
	(VEX_W_0F3818_P_2_M_0): Likewise.
	(VEX_W_0F3819_P_2_M_0): Likewise.
	(prefix_table): Updated.
	(three_byte_table): Likewise.
	(vex_table): Likewise.
	(vex_len_table): Likewise.
	(vex_w_table): Likewise.
	(mod_table): Likewise.
	(putop): Handle "LW".
	(intel_operand_size): Handle xmm_mb_mode, xmm_mw_mode,
	xmm_md_mode, xmm_mq_mode, xmmdw_mode, xmmqd_mode, ymmxmm_mode,
	vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode.
	(OP_EX): Likewise.
	(OP_E_memory): Handle vex_vsib_d_w_dq_mode and
	vex_vsib_q_w_dq_mode.
	(OP_XMM): Handle vex_vsib_q_w_dq_mode.
	(OP_VEX): Likewise.

	* i386-gen.c (cpu_flag_init): Add CpuAVX2 to CPU_ANY_SSE_FLAGS
	and CPU_ANY_AVX_FLAGS.  Add CPU_BMI2_FLAGS, CPU_LZCNT_FLAGS,
	CPU_INVPCID_FLAGS and CPU_AVX2_FLAGS.
	(cpu_flags): Add CpuAVX2, CpuBMI2, CpuLZCNT and CpuINVPCID.
	(opcode_modifiers): Add VecSIB.

	* i386-opc.h (CpuAVX2): New.
	(CpuBMI2): Likewise.
	(CpuLZCNT): Likewise.
	(CpuINVPCID): Likewise.
	(VecSIB128): Likewise.
	(VecSIB256): Likewise.
	(VecSIB): Likewise.
	(i386_cpu_flags): Add cpuavx2, cpubmi2, cpulzcnt and cpuinvpcid.
	(i386_opcode_modifier): Add vecsib.

	* i386-opc.tbl: Add invpcid, AVX2 and BMI2 instructions.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2011-06-03  Quentin Neill  <quentin.neill@amd.com>

	* i386-gen.c (cpu_flag_init): Add CpuF16C to CPU_BDVER2_FLAGS.
	* i386-init.h: Regenerated.

2011-06-03  Nick Clifton  <nickc@redhat.com>

	PR binutils/12752
	* arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
	computing address offsets.
	(print_arm_address): Likewise.
	(print_insn_arm): Likewise.
	(print_insn_thumb16): Likewise.
	(print_insn_thumb32): Likewise.

2011-06-02  Jie Zhang <jie@codesourcery.com>
	    Nathan Sidwell <nathan@codesourcery.com>
	    Maciej Rozycki <macro@codesourcery.com>

	* arm-dis.c (print_insn_coprocessor): Explicitly print #-0
	as address offset.
	(print_arm_address): Likewise. Elide positive #0 appropriately.
	(print_insn_arm): Likewise.

2011-06-02  Nick Clifton  <nickc@redhat.com>

	PR gas/12752
	* arm-dis.c (print_insn_thumb32): Do not sign extend  addresses
	passed to print_address_func.

2011-06-02  Nick Clifton  <nickc@redhat.com>

	* arm-dis.c: Fix spelling mistakes.
	* op/opcodes.pot: Regenerate.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.c: Replace S390_OPERAND_REG_EVEN with
	S390_OPERAND_REG_PAIR.  Fix INSTR_RRF_0UFEF instruction type.
	* s390-opc.txt: Fix cxr instruction type.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.c: Add new instruction types marking register pair
	operands.
	* s390-opc.txt: Match instructions having register pair operands
	to the new instruction types.

2011-05-19  Nick Clifton  <nickc@redhat.com>

	* v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
	operands.

2011-05-10  Quentin Neill  <quentin.neill@amd.com>

	* i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
	* i386-init.h: Regenerated.

2011-04-27  Nick Clifton  <nickc@redhat.com>

	* po/da.po: Updated Danish translation.

2011-04-26  Anton Blanchard  <anton@samba.org>

	* ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.

2011-04-21  DJ Delorie  <dj@redhat.com>

	* rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
	* rx-decode.c: Regenerate.

2011-04-20  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-init.h: Regenerated.

2011-04-19  Quentin Neill  <quentin.neill@amd.com>

	* i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
	from bdver1 flags.

2011-04-13  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c (disassemble): Always print a closing square brace if
	an opening square brace was printed.

2011-04-12  Nick Clifton  <nickc@redhat.com>

	PR binutils/12534
	* arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
	patterns.
	(print_insn_thumb32): Handle %L.

2011-04-11  Julian Brown  <julian@codesourcery.com>

	* arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
	(print_insn_thumb32): Add APSR bitmask support.

2011-04-07  Paul Carroll<pcarroll@codesourcery.com>

	* arm-dis.c (print_insn): init vars moved into private_data structure.

2011-03-24  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.

2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

	* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
	post-increment to support LPM Z+ instruction. Add support for 'E'
	constraint for DES instruction.
	(print_insn_avr): Adjust calls to avr_operand. Rename variable.

2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>

	* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.

2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>

	* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
	Use branch types instead.
	(print_insn): Likewise.

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-opc.c (mips_builtin_opcodes): Correct register use
	annotation of "alnv.ps".

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-opc.c (mips_builtin_opcodes): Add "pref" macro.

2011-02-22  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.

2011-02-22  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.

2011-02-19  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (saved_state): Mark static.  Change a[01]x to ax[] and
	a[01]w to aw[].  Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
	av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
	exception, end_of_registers, msize, memory, bfd_mach.
	(CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
	LB0REG, LC1REG, LT1REG, LB1REG): Delete
	(AXREG, AWREG, LCREG, LTREG, LBREG): Define.
	(get_allreg): Change to new defines.  Fallback to abort().

2011-02-14  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c: Add whitespace/parenthesis where needed.

2011-02-14  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (decode_LoopSetup_0): Return when reg is greater
	than 7.

2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure: Regenerate.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1.  Output
	dregs only when P is set, and dregs_lo otherwise.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (machine_registers): Delete REG_GP.
	(reg_names): Delete "GP".
	(decode_allregs): Change REG_GP to REG_LASTREG.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2,
	M_IH, M_IU): Delete.

2011-02-11  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (reg_names): Add const.
	(decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte,
	decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs,
	decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits,
	decode_counters, decode_allregs): Likewise.

2011-02-09  Michael Snyder  <msnyder@vmware.com>

	* i386-dis.c (OP_J): Parenthesize expression to prevent
	truncated addresses.
	(print_insn): Fix indentation off-by-one.

2011-02-01  Nick Clifton  <nickc@redhat.com>

	* po/da.po: Updated Danish translation.

2011-01-21  Dave Murphy  <davem@devkitpro.org>

	* ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.

2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (sIbT): New.
	(b_T_mode): Likewise.
	(dis386): Replace sIb with sIbT on "pushT".
	(x86_64_table): Replace sIb with Ib on "aam" and "aad".
	(OP_sI): Handle b_T_mode.  Properly sign-extend byte.

2011-01-18  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* i386-init.h: Regenerated.
	* i386-tbl.h: Regenerated

2011-01-17  Quentin Neill  <quentin.neill@amd.com>

	* i386-dis.c (REG_XOP_TBM_01): New.
	(REG_XOP_TBM_02): New.
	(reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
	(xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
	entries, and add bextr instruction.

	* i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
	(cpu_flags): Add CpuTBM.

	* i386-opc.h (CpuTBM) New.
	(i386_cpu_flags): Add bit cputbm.

	* i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
	blcs, blsfill, blsic, t1mskc, and tzmsk.

2011-01-12  DJ Delorie  <dj@redhat.com>

	* rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.

2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>

	* mips-dis.c (print_insn_args): Adjust the value to print the real
	offset for "+c" argument.

2011-01-10  Nick Clifton  <nickc@redhat.com>

	* po/da.po: Updated Danish translation.

2011-01-05  Nathan Sidwell  <nathan@codesourcery.com>

	* arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.

2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (REG_VEX_38F3): New.
	(PREFIX_0FBC): Likewise.
	(PREFIX_VEX_38F2): Likewise.
	(PREFIX_VEX_38F3_REG_1): Likewise.
	(PREFIX_VEX_38F3_REG_2): Likewise.
	(PREFIX_VEX_38F3_REG_3): Likewise.
	(PREFIX_VEX_38F7): Likewise.
	(VEX_LEN_38F2_P_0): Likewise.
	(VEX_LEN_38F3_R_1_P_0): Likewise.
	(VEX_LEN_38F3_R_2_P_0): Likewise.
	(VEX_LEN_38F3_R_3_P_0): Likewise.
	(VEX_LEN_38F7_P_0): Likewise.
	(dis386_twobyte): Use PREFIX_0FBC.
	(reg_table): Add REG_VEX_38F3.
	(prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2,
	PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2,
	PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7.
	(vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and
	PREFIX_VEX_38F7.
	(vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0,
	VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and
	VEX_LEN_38F7_P_0.

	* i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS.
	(cpu_flags): Add CpuBMI.

	* i386-opc.h (CpuBMI): New.
	(i386_cpu_flags): Add cpubmi.

	* i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (VexGdq): New.
	(OP_VEX): Handle dq_mode.

2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (process_copyright): Update copyright to 2011.

For older changes see ChangeLog-2010

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: