| // OBSOLETE /* Target-machine dependent code for Motorola 88000 series, for GDB. |
| // OBSOLETE |
| // OBSOLETE Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, |
| // OBSOLETE 2000, 2001, 2002 Free Software Foundation, Inc. |
| // OBSOLETE |
| // OBSOLETE This file is part of GDB. |
| // OBSOLETE |
| // OBSOLETE This program is free software; you can redistribute it and/or modify |
| // OBSOLETE it under the terms of the GNU General Public License as published by |
| // OBSOLETE the Free Software Foundation; either version 2 of the License, or |
| // OBSOLETE (at your option) any later version. |
| // OBSOLETE |
| // OBSOLETE This program is distributed in the hope that it will be useful, |
| // OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of |
| // OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| // OBSOLETE GNU General Public License for more details. |
| // OBSOLETE |
| // OBSOLETE You should have received a copy of the GNU General Public License |
| // OBSOLETE along with this program; if not, write to the Free Software |
| // OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, |
| // OBSOLETE Boston, MA 02111-1307, USA. */ |
| // OBSOLETE |
| // OBSOLETE #include "defs.h" |
| // OBSOLETE #include "frame.h" |
| // OBSOLETE #include "inferior.h" |
| // OBSOLETE #include "value.h" |
| // OBSOLETE #include "gdbcore.h" |
| // OBSOLETE #include "symtab.h" |
| // OBSOLETE #include "setjmp.h" |
| // OBSOLETE #include "value.h" |
| // OBSOLETE #include "regcache.h" |
| // OBSOLETE |
| // OBSOLETE /* Size of an instruction */ |
| // OBSOLETE #define BYTES_PER_88K_INSN 4 |
| // OBSOLETE |
| // OBSOLETE void frame_find_saved_regs (); |
| // OBSOLETE |
| // OBSOLETE /* Is this target an m88110? Otherwise assume m88100. This has |
| // OBSOLETE relevance for the ways in which we screw with instruction pointers. */ |
| // OBSOLETE |
| // OBSOLETE int target_is_m88110 = 0; |
| // OBSOLETE |
| // OBSOLETE void |
| // OBSOLETE m88k_target_write_pc (CORE_ADDR pc, ptid_t ptid) |
| // OBSOLETE { |
| // OBSOLETE /* According to the MC88100 RISC Microprocessor User's Manual, |
| // OBSOLETE section 6.4.3.1.2: |
| // OBSOLETE |
| // OBSOLETE ... can be made to return to a particular instruction by placing |
| // OBSOLETE a valid instruction address in the SNIP and the next sequential |
| // OBSOLETE instruction address in the SFIP (with V bits set and E bits |
| // OBSOLETE clear). The rte resumes execution at the instruction pointed to |
| // OBSOLETE by the SNIP, then the SFIP. |
| // OBSOLETE |
| // OBSOLETE The E bit is the least significant bit (bit 0). The V (valid) |
| // OBSOLETE bit is bit 1. This is why we logical or 2 into the values we are |
| // OBSOLETE writing below. It turns out that SXIP plays no role when |
| // OBSOLETE returning from an exception so nothing special has to be done |
| // OBSOLETE with it. We could even (presumably) give it a totally bogus |
| // OBSOLETE value. |
| // OBSOLETE |
| // OBSOLETE -- Kevin Buettner */ |
| // OBSOLETE |
| // OBSOLETE write_register_pid (SXIP_REGNUM, pc, ptid); |
| // OBSOLETE write_register_pid (SNIP_REGNUM, (pc | 2), ptid); |
| // OBSOLETE write_register_pid (SFIP_REGNUM, (pc | 2) + 4, ptid); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* The type of a register. */ |
| // OBSOLETE struct type * |
| // OBSOLETE m88k_register_type (int regnum) |
| // OBSOLETE { |
| // OBSOLETE if (regnum >= XFP_REGNUM) |
| // OBSOLETE return builtin_type_m88110_ext; |
| // OBSOLETE else if (regnum == PC_REGNUM || regnum == FP_REGNUM || regnum == SP_REGNUM) |
| // OBSOLETE return builtin_type_void_func_ptr; |
| // OBSOLETE else |
| // OBSOLETE return builtin_type_int32; |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE |
| // OBSOLETE /* The m88k kernel aligns all instructions on 4-byte boundaries. The |
| // OBSOLETE kernel also uses the least significant two bits for its own hocus |
| // OBSOLETE pocus. When gdb receives an address from the kernel, it needs to |
| // OBSOLETE preserve those right-most two bits, but gdb also needs to be careful |
| // OBSOLETE to realize that those two bits are not really a part of the address |
| // OBSOLETE of an instruction. Shrug. */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE m88k_addr_bits_remove (CORE_ADDR addr) |
| // OBSOLETE { |
| // OBSOLETE return ((addr) & ~3); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE |
| // OBSOLETE /* Given a GDB frame, determine the address of the calling function's frame. |
| // OBSOLETE This will be used to create a new GDB frame struct, and then |
| // OBSOLETE INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. |
| // OBSOLETE |
| // OBSOLETE For us, the frame address is its stack pointer value, so we look up |
| // OBSOLETE the function prologue to determine the caller's sp value, and return it. */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE frame_chain (struct frame_info *thisframe) |
| // OBSOLETE { |
| // OBSOLETE |
| // OBSOLETE frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0); |
| // OBSOLETE /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not |
| // OBSOLETE the ADDRESS, of SP_REGNUM. It also depends on the cache of |
| // OBSOLETE frame_find_saved_regs results. */ |
| // OBSOLETE if (thisframe->fsr->regs[SP_REGNUM]) |
| // OBSOLETE return thisframe->fsr->regs[SP_REGNUM]; |
| // OBSOLETE else |
| // OBSOLETE return thisframe->frame; /* Leaf fn -- next frame up has same SP. */ |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE int |
| // OBSOLETE frameless_function_invocation (struct frame_info *frame) |
| // OBSOLETE { |
| // OBSOLETE |
| // OBSOLETE frame_find_saved_regs (frame, (struct frame_saved_regs *) 0); |
| // OBSOLETE /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not |
| // OBSOLETE the ADDRESS, of SP_REGNUM. It also depends on the cache of |
| // OBSOLETE frame_find_saved_regs results. */ |
| // OBSOLETE if (frame->fsr->regs[SP_REGNUM]) |
| // OBSOLETE return 0; /* Frameful -- return addr saved somewhere */ |
| // OBSOLETE else |
| // OBSOLETE return 1; /* Frameless -- no saved return address */ |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE void |
| // OBSOLETE init_extra_frame_info (int fromleaf, struct frame_info *frame) |
| // OBSOLETE { |
| // OBSOLETE frame->fsr = 0; /* Not yet allocated */ |
| // OBSOLETE frame->args_pointer = 0; /* Unknown */ |
| // OBSOLETE frame->locals_pointer = 0; /* Unknown */ |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Examine an m88k function prologue, recording the addresses at which |
| // OBSOLETE registers are saved explicitly by the prologue code, and returning |
| // OBSOLETE the address of the first instruction after the prologue (but not |
| // OBSOLETE after the instruction at address LIMIT, as explained below). |
| // OBSOLETE |
| // OBSOLETE LIMIT places an upper bound on addresses of the instructions to be |
| // OBSOLETE examined. If the prologue code scan reaches LIMIT, the scan is |
| // OBSOLETE aborted and LIMIT is returned. This is used, when examining the |
| // OBSOLETE prologue for the current frame, to keep examine_prologue () from |
| // OBSOLETE claiming that a given register has been saved when in fact the |
| // OBSOLETE instruction that saves it has not yet been executed. LIMIT is used |
| // OBSOLETE at other times to stop the scan when we hit code after the true |
| // OBSOLETE function prologue (e.g. for the first source line) which might |
| // OBSOLETE otherwise be mistaken for function prologue. |
| // OBSOLETE |
| // OBSOLETE The format of the function prologue matched by this routine is |
| // OBSOLETE derived from examination of the source to gcc 1.95, particularly |
| // OBSOLETE the routine output_prologue () in config/out-m88k.c. |
| // OBSOLETE |
| // OBSOLETE subu r31,r31,n # stack pointer update |
| // OBSOLETE |
| // OBSOLETE (st rn,r31,offset)? # save incoming regs |
| // OBSOLETE (st.d rn,r31,offset)? |
| // OBSOLETE |
| // OBSOLETE (addu r30,r31,n)? # frame pointer update |
| // OBSOLETE |
| // OBSOLETE (pic sequence)? # PIC code prologue |
| // OBSOLETE |
| // OBSOLETE (or rn,rm,0)? # Move parameters to other regs |
| // OBSOLETE */ |
| // OBSOLETE |
| // OBSOLETE /* Macros for extracting fields from instructions. */ |
| // OBSOLETE |
| // OBSOLETE #define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos)) |
| // OBSOLETE #define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width)) |
| // OBSOLETE #define SUBU_OFFSET(x) ((unsigned)(x & 0xFFFF)) |
| // OBSOLETE #define ST_OFFSET(x) ((unsigned)((x) & 0xFFFF)) |
| // OBSOLETE #define ST_SRC(x) EXTRACT_FIELD ((x), 21, 5) |
| // OBSOLETE #define ADDU_OFFSET(x) ((unsigned)(x & 0xFFFF)) |
| // OBSOLETE |
| // OBSOLETE /* |
| // OBSOLETE * prologue_insn_tbl is a table of instructions which may comprise a |
| // OBSOLETE * function prologue. Associated with each table entry (corresponding |
| // OBSOLETE * to a single instruction or group of instructions), is an action. |
| // OBSOLETE * This action is used by examine_prologue (below) to determine |
| // OBSOLETE * the state of certain machine registers and where the stack frame lives. |
| // OBSOLETE */ |
| // OBSOLETE |
| // OBSOLETE enum prologue_insn_action |
| // OBSOLETE { |
| // OBSOLETE PIA_SKIP, /* don't care what the instruction does */ |
| // OBSOLETE PIA_NOTE_ST, /* note register stored and where */ |
| // OBSOLETE PIA_NOTE_STD, /* note pair of registers stored and where */ |
| // OBSOLETE PIA_NOTE_SP_ADJUSTMENT, /* note stack pointer adjustment */ |
| // OBSOLETE PIA_NOTE_FP_ASSIGNMENT, /* note frame pointer assignment */ |
| // OBSOLETE PIA_NOTE_PROLOGUE_END, /* no more prologue */ |
| // OBSOLETE }; |
| // OBSOLETE |
| // OBSOLETE struct prologue_insns |
| // OBSOLETE { |
| // OBSOLETE unsigned long insn; |
| // OBSOLETE unsigned long mask; |
| // OBSOLETE enum prologue_insn_action action; |
| // OBSOLETE }; |
| // OBSOLETE |
| // OBSOLETE struct prologue_insns prologue_insn_tbl[] = |
| // OBSOLETE { |
| // OBSOLETE /* Various register move instructions */ |
| // OBSOLETE {0x58000000, 0xf800ffff, PIA_SKIP}, /* or/or.u with immed of 0 */ |
| // OBSOLETE {0xf4005800, 0xfc1fffe0, PIA_SKIP}, /* or rd, r0, rs */ |
| // OBSOLETE {0xf4005800, 0xfc00ffff, PIA_SKIP}, /* or rd, rs, r0 */ |
| // OBSOLETE |
| // OBSOLETE /* Stack pointer setup: "subu sp, sp, n" where n is a multiple of 8 */ |
| // OBSOLETE {0x67ff0000, 0xffff0007, PIA_NOTE_SP_ADJUSTMENT}, |
| // OBSOLETE |
| // OBSOLETE /* Frame pointer assignment: "addu r30, r31, n" */ |
| // OBSOLETE {0x63df0000, 0xffff0000, PIA_NOTE_FP_ASSIGNMENT}, |
| // OBSOLETE |
| // OBSOLETE /* Store to stack instructions; either "st rx, sp, n" or "st.d rx, sp, n" */ |
| // OBSOLETE {0x241f0000, 0xfc1f0000, PIA_NOTE_ST}, /* st rx, sp, n */ |
| // OBSOLETE {0x201f0000, 0xfc1f0000, PIA_NOTE_STD}, /* st.d rs, sp, n */ |
| // OBSOLETE |
| // OBSOLETE /* Instructions needed for setting up r25 for pic code. */ |
| // OBSOLETE {0x5f200000, 0xffff0000, PIA_SKIP}, /* or.u r25, r0, offset_high */ |
| // OBSOLETE {0xcc000002, 0xffffffff, PIA_SKIP}, /* bsr.n Lab */ |
| // OBSOLETE {0x5b390000, 0xffff0000, PIA_SKIP}, /* or r25, r25, offset_low */ |
| // OBSOLETE {0xf7396001, 0xffffffff, PIA_SKIP}, /* Lab: addu r25, r25, r1 */ |
| // OBSOLETE |
| // OBSOLETE /* Various branch or jump instructions which have a delay slot -- these |
| // OBSOLETE do not form part of the prologue, but the instruction in the delay |
| // OBSOLETE slot might be a store instruction which should be noted. */ |
| // OBSOLETE {0xc4000000, 0xe4000000, PIA_NOTE_PROLOGUE_END}, |
| // OBSOLETE /* br.n, bsr.n, bb0.n, or bb1.n */ |
| // OBSOLETE {0xec000000, 0xfc000000, PIA_NOTE_PROLOGUE_END}, /* bcnd.n */ |
| // OBSOLETE {0xf400c400, 0xfffff7e0, PIA_NOTE_PROLOGUE_END} /* jmp.n or jsr.n */ |
| // OBSOLETE |
| // OBSOLETE }; |
| // OBSOLETE |
| // OBSOLETE |
| // OBSOLETE /* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or |
| // OBSOLETE is not the address of a valid instruction, the address of the next |
| // OBSOLETE instruction beyond ADDR otherwise. *PWORD1 receives the first word |
| // OBSOLETE of the instruction. */ |
| // OBSOLETE |
| // OBSOLETE #define NEXT_PROLOGUE_INSN(addr, lim, pword1) \ |
| // OBSOLETE (((addr) < (lim)) ? next_insn (addr, pword1) : 0) |
| // OBSOLETE |
| // OBSOLETE /* Read the m88k instruction at 'memaddr' and return the address of |
| // OBSOLETE the next instruction after that, or 0 if 'memaddr' is not the |
| // OBSOLETE address of a valid instruction. The instruction |
| // OBSOLETE is stored at 'pword1'. */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE next_insn (CORE_ADDR memaddr, unsigned long *pword1) |
| // OBSOLETE { |
| // OBSOLETE *pword1 = read_memory_integer (memaddr, BYTES_PER_88K_INSN); |
| // OBSOLETE return memaddr + BYTES_PER_88K_INSN; |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Read a register from frames called by us (or from the hardware regs). */ |
| // OBSOLETE |
| // OBSOLETE static int |
| // OBSOLETE read_next_frame_reg (struct frame_info *frame, int regno) |
| // OBSOLETE { |
| // OBSOLETE for (; frame; frame = frame->next) |
| // OBSOLETE { |
| // OBSOLETE if (regno == SP_REGNUM) |
| // OBSOLETE return FRAME_FP (frame); |
| // OBSOLETE else if (frame->fsr->regs[regno]) |
| // OBSOLETE return read_memory_integer (frame->fsr->regs[regno], 4); |
| // OBSOLETE } |
| // OBSOLETE return read_register (regno); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Examine the prologue of a function. `ip' points to the first instruction. |
| // OBSOLETE `limit' is the limit of the prologue (e.g. the addr of the first |
| // OBSOLETE linenumber, or perhaps the program counter if we're stepping through). |
| // OBSOLETE `frame_sp' is the stack pointer value in use in this frame. |
| // OBSOLETE `fsr' is a pointer to a frame_saved_regs structure into which we put |
| // OBSOLETE info about the registers saved by this frame. |
| // OBSOLETE `fi' is a struct frame_info pointer; we fill in various fields in it |
| // OBSOLETE to reflect the offsets of the arg pointer and the locals pointer. */ |
| // OBSOLETE |
| // OBSOLETE static CORE_ADDR |
| // OBSOLETE examine_prologue (register CORE_ADDR ip, register CORE_ADDR limit, |
| // OBSOLETE CORE_ADDR frame_sp, struct frame_saved_regs *fsr, |
| // OBSOLETE struct frame_info *fi) |
| // OBSOLETE { |
| // OBSOLETE register CORE_ADDR next_ip; |
| // OBSOLETE register int src; |
| // OBSOLETE unsigned long insn; |
| // OBSOLETE int size, offset; |
| // OBSOLETE char must_adjust[32]; /* If set, must adjust offsets in fsr */ |
| // OBSOLETE int sp_offset = -1; /* -1 means not set (valid must be mult of 8) */ |
| // OBSOLETE int fp_offset = -1; /* -1 means not set */ |
| // OBSOLETE CORE_ADDR frame_fp; |
| // OBSOLETE CORE_ADDR prologue_end = 0; |
| // OBSOLETE |
| // OBSOLETE memset (must_adjust, '\0', sizeof (must_adjust)); |
| // OBSOLETE next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn); |
| // OBSOLETE |
| // OBSOLETE while (next_ip) |
| // OBSOLETE { |
| // OBSOLETE struct prologue_insns *pip; |
| // OBSOLETE |
| // OBSOLETE for (pip = prologue_insn_tbl; (insn & pip->mask) != pip->insn;) |
| // OBSOLETE if (++pip >= prologue_insn_tbl + sizeof prologue_insn_tbl) |
| // OBSOLETE goto end_of_prologue_found; /* not a prologue insn */ |
| // OBSOLETE |
| // OBSOLETE switch (pip->action) |
| // OBSOLETE { |
| // OBSOLETE case PIA_NOTE_ST: |
| // OBSOLETE case PIA_NOTE_STD: |
| // OBSOLETE if (sp_offset != -1) |
| // OBSOLETE { |
| // OBSOLETE src = ST_SRC (insn); |
| // OBSOLETE offset = ST_OFFSET (insn); |
| // OBSOLETE must_adjust[src] = 1; |
| // OBSOLETE fsr->regs[src++] = offset; /* Will be adjusted later */ |
| // OBSOLETE if (pip->action == PIA_NOTE_STD && src < 32) |
| // OBSOLETE { |
| // OBSOLETE offset += 4; |
| // OBSOLETE must_adjust[src] = 1; |
| // OBSOLETE fsr->regs[src++] = offset; |
| // OBSOLETE } |
| // OBSOLETE } |
| // OBSOLETE else |
| // OBSOLETE goto end_of_prologue_found; |
| // OBSOLETE break; |
| // OBSOLETE case PIA_NOTE_SP_ADJUSTMENT: |
| // OBSOLETE if (sp_offset == -1) |
| // OBSOLETE sp_offset = -SUBU_OFFSET (insn); |
| // OBSOLETE else |
| // OBSOLETE goto end_of_prologue_found; |
| // OBSOLETE break; |
| // OBSOLETE case PIA_NOTE_FP_ASSIGNMENT: |
| // OBSOLETE if (fp_offset == -1) |
| // OBSOLETE fp_offset = ADDU_OFFSET (insn); |
| // OBSOLETE else |
| // OBSOLETE goto end_of_prologue_found; |
| // OBSOLETE break; |
| // OBSOLETE case PIA_NOTE_PROLOGUE_END: |
| // OBSOLETE if (!prologue_end) |
| // OBSOLETE prologue_end = ip; |
| // OBSOLETE break; |
| // OBSOLETE case PIA_SKIP: |
| // OBSOLETE default: |
| // OBSOLETE /* Do nothing */ |
| // OBSOLETE break; |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE ip = next_ip; |
| // OBSOLETE next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE end_of_prologue_found: |
| // OBSOLETE |
| // OBSOLETE if (prologue_end) |
| // OBSOLETE ip = prologue_end; |
| // OBSOLETE |
| // OBSOLETE /* We're done with the prologue. If we don't care about the stack |
| // OBSOLETE frame itself, just return. (Note that fsr->regs has been trashed, |
| // OBSOLETE but the one caller who calls with fi==0 passes a dummy there.) */ |
| // OBSOLETE |
| // OBSOLETE if (fi == 0) |
| // OBSOLETE return ip; |
| // OBSOLETE |
| // OBSOLETE /* |
| // OBSOLETE OK, now we have: |
| // OBSOLETE |
| // OBSOLETE sp_offset original (before any alloca calls) displacement of SP |
| // OBSOLETE (will be negative). |
| // OBSOLETE |
| // OBSOLETE fp_offset displacement from original SP to the FP for this frame |
| // OBSOLETE or -1. |
| // OBSOLETE |
| // OBSOLETE fsr->regs[0..31] displacement from original SP to the stack |
| // OBSOLETE location where reg[0..31] is stored. |
| // OBSOLETE |
| // OBSOLETE must_adjust[0..31] set if corresponding offset was set. |
| // OBSOLETE |
| // OBSOLETE If alloca has been called between the function prologue and the current |
| // OBSOLETE IP, then the current SP (frame_sp) will not be the original SP as set by |
| // OBSOLETE the function prologue. If the current SP is not the original SP, then the |
| // OBSOLETE compiler will have allocated an FP for this frame, fp_offset will be set, |
| // OBSOLETE and we can use it to calculate the original SP. |
| // OBSOLETE |
| // OBSOLETE Then, we figure out where the arguments and locals are, and relocate the |
| // OBSOLETE offsets in fsr->regs to absolute addresses. */ |
| // OBSOLETE |
| // OBSOLETE if (fp_offset != -1) |
| // OBSOLETE { |
| // OBSOLETE /* We have a frame pointer, so get it, and base our calc's on it. */ |
| // OBSOLETE frame_fp = (CORE_ADDR) read_next_frame_reg (fi->next, ACTUAL_FP_REGNUM); |
| // OBSOLETE frame_sp = frame_fp - fp_offset; |
| // OBSOLETE } |
| // OBSOLETE else |
| // OBSOLETE { |
| // OBSOLETE /* We have no frame pointer, therefore frame_sp is still the same value |
| // OBSOLETE as set by prologue. But where is the frame itself? */ |
| // OBSOLETE if (must_adjust[SRP_REGNUM]) |
| // OBSOLETE { |
| // OBSOLETE /* Function header saved SRP (r1), the return address. Frame starts |
| // OBSOLETE 4 bytes down from where it was saved. */ |
| // OBSOLETE frame_fp = frame_sp + fsr->regs[SRP_REGNUM] - 4; |
| // OBSOLETE fi->locals_pointer = frame_fp; |
| // OBSOLETE } |
| // OBSOLETE else |
| // OBSOLETE { |
| // OBSOLETE /* Function header didn't save SRP (r1), so we are in a leaf fn or |
| // OBSOLETE are otherwise confused. */ |
| // OBSOLETE frame_fp = -1; |
| // OBSOLETE } |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* The locals are relative to the FP (whether it exists as an allocated |
| // OBSOLETE register, or just as an assumed offset from the SP) */ |
| // OBSOLETE fi->locals_pointer = frame_fp; |
| // OBSOLETE |
| // OBSOLETE /* The arguments are just above the SP as it was before we adjusted it |
| // OBSOLETE on entry. */ |
| // OBSOLETE fi->args_pointer = frame_sp - sp_offset; |
| // OBSOLETE |
| // OBSOLETE /* Now that we know the SP value used by the prologue, we know where |
| // OBSOLETE it saved all the registers. */ |
| // OBSOLETE for (src = 0; src < 32; src++) |
| // OBSOLETE if (must_adjust[src]) |
| // OBSOLETE fsr->regs[src] += frame_sp; |
| // OBSOLETE |
| // OBSOLETE /* The saved value of the SP is always known. */ |
| // OBSOLETE /* (we hope...) */ |
| // OBSOLETE if (fsr->regs[SP_REGNUM] != 0 |
| // OBSOLETE && fsr->regs[SP_REGNUM] != frame_sp - sp_offset) |
| // OBSOLETE fprintf_unfiltered (gdb_stderr, "Bad saved SP value %lx != %lx, offset %x!\n", |
| // OBSOLETE fsr->regs[SP_REGNUM], |
| // OBSOLETE frame_sp - sp_offset, sp_offset); |
| // OBSOLETE |
| // OBSOLETE fsr->regs[SP_REGNUM] = frame_sp - sp_offset; |
| // OBSOLETE |
| // OBSOLETE return (ip); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Given an ip value corresponding to the start of a function, |
| // OBSOLETE return the ip of the first instruction after the function |
| // OBSOLETE prologue. */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE m88k_skip_prologue (CORE_ADDR ip) |
| // OBSOLETE { |
| // OBSOLETE struct frame_saved_regs saved_regs_dummy; |
| // OBSOLETE struct symtab_and_line sal; |
| // OBSOLETE CORE_ADDR limit; |
| // OBSOLETE |
| // OBSOLETE sal = find_pc_line (ip, 0); |
| // OBSOLETE limit = (sal.end) ? sal.end : 0xffffffff; |
| // OBSOLETE |
| // OBSOLETE return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy, |
| // OBSOLETE (struct frame_info *) 0)); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, |
| // OBSOLETE the addresses of the saved registers of frame described by FRAME_INFO. |
| // OBSOLETE This includes special registers such as pc and fp saved in special |
| // OBSOLETE ways in the stack frame. sp is even more special: |
| // OBSOLETE the address we return for it IS the sp for the next frame. |
| // OBSOLETE |
| // OBSOLETE We cache the result of doing this in the frame_obstack, since it is |
| // OBSOLETE fairly expensive. */ |
| // OBSOLETE |
| // OBSOLETE void |
| // OBSOLETE frame_find_saved_regs (struct frame_info *fi, struct frame_saved_regs *fsr) |
| // OBSOLETE { |
| // OBSOLETE register struct frame_saved_regs *cache_fsr; |
| // OBSOLETE CORE_ADDR ip; |
| // OBSOLETE struct symtab_and_line sal; |
| // OBSOLETE CORE_ADDR limit; |
| // OBSOLETE |
| // OBSOLETE if (!fi->fsr) |
| // OBSOLETE { |
| // OBSOLETE cache_fsr = (struct frame_saved_regs *) |
| // OBSOLETE frame_obstack_alloc (sizeof (struct frame_saved_regs)); |
| // OBSOLETE memset (cache_fsr, '\0', sizeof (struct frame_saved_regs)); |
| // OBSOLETE fi->fsr = cache_fsr; |
| // OBSOLETE |
| // OBSOLETE /* Find the start and end of the function prologue. If the PC |
| // OBSOLETE is in the function prologue, we only consider the part that |
| // OBSOLETE has executed already. In the case where the PC is not in |
| // OBSOLETE the function prologue, we set limit to two instructions beyond |
| // OBSOLETE where the prologue ends in case if any of the prologue instructions |
| // OBSOLETE were moved into a delay slot of a branch instruction. */ |
| // OBSOLETE |
| // OBSOLETE ip = get_pc_function_start (fi->pc); |
| // OBSOLETE sal = find_pc_line (ip, 0); |
| // OBSOLETE limit = (sal.end && sal.end < fi->pc) ? sal.end + 2 * BYTES_PER_88K_INSN |
| // OBSOLETE : fi->pc; |
| // OBSOLETE |
| // OBSOLETE /* This will fill in fields in *fi as well as in cache_fsr. */ |
| // OBSOLETE #ifdef SIGTRAMP_FRAME_FIXUP |
| // OBSOLETE if (fi->signal_handler_caller) |
| // OBSOLETE SIGTRAMP_FRAME_FIXUP (fi->frame); |
| // OBSOLETE #endif |
| // OBSOLETE examine_prologue (ip, limit, fi->frame, cache_fsr, fi); |
| // OBSOLETE #ifdef SIGTRAMP_SP_FIXUP |
| // OBSOLETE if (fi->signal_handler_caller && fi->fsr->regs[SP_REGNUM]) |
| // OBSOLETE SIGTRAMP_SP_FIXUP (fi->fsr->regs[SP_REGNUM]); |
| // OBSOLETE #endif |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE if (fsr) |
| // OBSOLETE *fsr = *fi->fsr; |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Return the address of the locals block for the frame |
| // OBSOLETE described by FI. Returns 0 if the address is unknown. |
| // OBSOLETE NOTE! Frame locals are referred to by negative offsets from the |
| // OBSOLETE argument pointer, so this is the same as frame_args_address(). */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE frame_locals_address (struct frame_info *fi) |
| // OBSOLETE { |
| // OBSOLETE struct frame_saved_regs fsr; |
| // OBSOLETE |
| // OBSOLETE if (fi->args_pointer) /* Cached value is likely there. */ |
| // OBSOLETE return fi->args_pointer; |
| // OBSOLETE |
| // OBSOLETE /* Nope, generate it. */ |
| // OBSOLETE |
| // OBSOLETE get_frame_saved_regs (fi, &fsr); |
| // OBSOLETE |
| // OBSOLETE return fi->args_pointer; |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Return the address of the argument block for the frame |
| // OBSOLETE described by FI. Returns 0 if the address is unknown. */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE frame_args_address (struct frame_info *fi) |
| // OBSOLETE { |
| // OBSOLETE struct frame_saved_regs fsr; |
| // OBSOLETE |
| // OBSOLETE if (fi->args_pointer) /* Cached value is likely there. */ |
| // OBSOLETE return fi->args_pointer; |
| // OBSOLETE |
| // OBSOLETE /* Nope, generate it. */ |
| // OBSOLETE |
| // OBSOLETE get_frame_saved_regs (fi, &fsr); |
| // OBSOLETE |
| // OBSOLETE return fi->args_pointer; |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE /* Return the saved PC from this frame. |
| // OBSOLETE |
| // OBSOLETE If the frame has a memory copy of SRP_REGNUM, use that. If not, |
| // OBSOLETE just use the register SRP_REGNUM itself. */ |
| // OBSOLETE |
| // OBSOLETE CORE_ADDR |
| // OBSOLETE frame_saved_pc (struct frame_info *frame) |
| // OBSOLETE { |
| // OBSOLETE return read_next_frame_reg (frame, SRP_REGNUM); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE |
| // OBSOLETE #define DUMMY_FRAME_SIZE 192 |
| // OBSOLETE |
| // OBSOLETE static void |
| // OBSOLETE write_word (CORE_ADDR sp, ULONGEST word) |
| // OBSOLETE { |
| // OBSOLETE register int len = REGISTER_SIZE; |
| // OBSOLETE char buffer[MAX_REGISTER_RAW_SIZE]; |
| // OBSOLETE |
| // OBSOLETE store_unsigned_integer (buffer, len, word); |
| // OBSOLETE write_memory (sp, buffer, len); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE void |
| // OBSOLETE m88k_push_dummy_frame (void) |
| // OBSOLETE { |
| // OBSOLETE register CORE_ADDR sp = read_register (SP_REGNUM); |
| // OBSOLETE register int rn; |
| // OBSOLETE int offset; |
| // OBSOLETE |
| // OBSOLETE sp -= DUMMY_FRAME_SIZE; /* allocate a bunch of space */ |
| // OBSOLETE |
| // OBSOLETE for (rn = 0, offset = 0; rn <= SP_REGNUM; rn++, offset += 4) |
| // OBSOLETE write_word (sp + offset, read_register (rn)); |
| // OBSOLETE |
| // OBSOLETE write_word (sp + offset, read_register (SXIP_REGNUM)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_word (sp + offset, read_register (SNIP_REGNUM)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_word (sp + offset, read_register (SFIP_REGNUM)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_word (sp + offset, read_register (PSR_REGNUM)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_word (sp + offset, read_register (FPSR_REGNUM)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_word (sp + offset, read_register (FPCR_REGNUM)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_register (SP_REGNUM, sp); |
| // OBSOLETE write_register (ACTUAL_FP_REGNUM, sp); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE void |
| // OBSOLETE pop_frame (void) |
| // OBSOLETE { |
| // OBSOLETE register struct frame_info *frame = get_current_frame (); |
| // OBSOLETE register int regnum; |
| // OBSOLETE struct frame_saved_regs fsr; |
| // OBSOLETE |
| // OBSOLETE get_frame_saved_regs (frame, &fsr); |
| // OBSOLETE |
| // OBSOLETE if (PC_IN_CALL_DUMMY (read_pc (), read_register (SP_REGNUM), frame->frame)) |
| // OBSOLETE { |
| // OBSOLETE /* FIXME: I think get_frame_saved_regs should be handling this so |
| // OBSOLETE that we can deal with the saved registers properly (e.g. frame |
| // OBSOLETE 1 is a call dummy, the user types "frame 2" and then "print $ps"). */ |
| // OBSOLETE register CORE_ADDR sp = read_register (ACTUAL_FP_REGNUM); |
| // OBSOLETE int offset; |
| // OBSOLETE |
| // OBSOLETE for (regnum = 0, offset = 0; regnum <= SP_REGNUM; regnum++, offset += 4) |
| // OBSOLETE (void) write_register (regnum, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE |
| // OBSOLETE write_register (SXIP_REGNUM, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_register (SNIP_REGNUM, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_register (SFIP_REGNUM, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_register (PSR_REGNUM, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_register (FPSR_REGNUM, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE write_register (FPCR_REGNUM, read_memory_integer (sp + offset, 4)); |
| // OBSOLETE offset += 4; |
| // OBSOLETE |
| // OBSOLETE } |
| // OBSOLETE else |
| // OBSOLETE { |
| // OBSOLETE for (regnum = FP_REGNUM; regnum > 0; regnum--) |
| // OBSOLETE if (fsr.regs[regnum]) |
| // OBSOLETE write_register (regnum, |
| // OBSOLETE read_memory_integer (fsr.regs[regnum], 4)); |
| // OBSOLETE write_pc (frame_saved_pc (frame)); |
| // OBSOLETE } |
| // OBSOLETE reinit_frame_cache (); |
| // OBSOLETE } |
| // OBSOLETE |
| // OBSOLETE void |
| // OBSOLETE _initialize_m88k_tdep (void) |
| // OBSOLETE { |
| // OBSOLETE tm_print_insn = print_insn_m88k; |
| // OBSOLETE } |