| /* tc-xtensa.c -- Assemble Xtensa instructions. |
| Copyright 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| |
| This file is part of GAS, the GNU Assembler. |
| |
| GAS is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| GAS is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GAS; see the file COPYING. If not, write to |
| the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| #include <string.h> |
| #include <limits.h> |
| #include "as.h" |
| #include "sb.h" |
| #include "safe-ctype.h" |
| #include "tc-xtensa.h" |
| #include "frags.h" |
| #include "subsegs.h" |
| #include "xtensa-relax.h" |
| #include "xtensa-istack.h" |
| #include "dwarf2dbg.h" |
| #include "struc-symbol.h" |
| #include "xtensa-config.h" |
| |
| #ifndef uint32 |
| #define uint32 unsigned int |
| #endif |
| #ifndef int32 |
| #define int32 signed int |
| #endif |
| |
| /* Notes: |
| |
| Naming conventions (used somewhat inconsistently): |
| The xtensa_ functions are exported |
| The xg_ functions are internal |
| |
| We also have a couple of different extensibility mechanisms. |
| 1) The idiom replacement: |
| This is used when a line is first parsed to |
| replace an instruction pattern with another instruction |
| It is currently limited to replacements of instructions |
| with constant operands. |
| 2) The xtensa-relax.c mechanism that has stronger instruction |
| replacement patterns. When an instruction's immediate field |
| does not fit the next instruction sequence is attempted. |
| In addition, "narrow" opcodes are supported this way. */ |
| |
| |
| /* Define characters with special meanings to GAS. */ |
| const char comment_chars[] = "#"; |
| const char line_comment_chars[] = "#"; |
| const char line_separator_chars[] = ";"; |
| const char EXP_CHARS[] = "eE"; |
| const char FLT_CHARS[] = "rRsSfFdDxXpP"; |
| |
| |
| /* Flags to indicate whether the hardware supports the density and |
| absolute literals options. */ |
| |
| bfd_boolean density_supported = XCHAL_HAVE_DENSITY; |
| bfd_boolean absolute_literals_supported = XSHAL_USE_ABSOLUTE_LITERALS; |
| |
| /* Maximum width we would pad an unreachable frag to get alignment. */ |
| #define UNREACHABLE_MAX_WIDTH 8 |
| |
| static vliw_insn cur_vinsn; |
| |
| unsigned xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH; |
| |
| static enum debug_info_type xt_saved_debug_type = DEBUG_NONE; |
| |
| /* Some functions are only valid in the front end. This variable |
| allows us to assert that we haven't crossed over into the |
| back end. */ |
| static bfd_boolean past_xtensa_end = FALSE; |
| |
| /* Flags for properties of the last instruction in a segment. */ |
| #define FLAG_IS_A0_WRITER 0x1 |
| #define FLAG_IS_BAD_LOOPEND 0x2 |
| |
| |
| /* We define a special segment names ".literal" to place literals |
| into. The .fini and .init sections are special because they |
| contain code that is moved together by the linker. We give them |
| their own special .fini.literal and .init.literal sections. */ |
| |
| #define LITERAL_SECTION_NAME xtensa_section_rename (".literal") |
| #define LIT4_SECTION_NAME xtensa_section_rename (".lit4") |
| #define FINI_SECTION_NAME xtensa_section_rename (".fini") |
| #define INIT_SECTION_NAME xtensa_section_rename (".init") |
| #define FINI_LITERAL_SECTION_NAME xtensa_section_rename (".fini.literal") |
| #define INIT_LITERAL_SECTION_NAME xtensa_section_rename (".init.literal") |
| |
| |
| /* This type is used for the directive_stack to keep track of the |
| state of the literal collection pools. */ |
| |
| typedef struct lit_state_struct |
| { |
| const char *lit_seg_name; |
| const char *lit4_seg_name; |
| const char *init_lit_seg_name; |
| const char *fini_lit_seg_name; |
| segT lit_seg; |
| segT lit4_seg; |
| segT init_lit_seg; |
| segT fini_lit_seg; |
| } lit_state; |
| |
| static lit_state default_lit_sections; |
| |
| |
| /* We keep lists of literal segments. The seg_list type is the node |
| for such a list. The *_literal_head locals are the heads of the |
| various lists. All of these lists have a dummy node at the start. */ |
| |
| typedef struct seg_list_struct |
| { |
| struct seg_list_struct *next; |
| segT seg; |
| } seg_list; |
| |
| static seg_list literal_head_h; |
| static seg_list *literal_head = &literal_head_h; |
| static seg_list init_literal_head_h; |
| static seg_list *init_literal_head = &init_literal_head_h; |
| static seg_list fini_literal_head_h; |
| static seg_list *fini_literal_head = &fini_literal_head_h; |
| |
| |
| /* Lists of symbols. We keep a list of symbols that label the current |
| instruction, so that we can adjust the symbols when inserting alignment |
| for various instructions. We also keep a list of all the symbols on |
| literals, so that we can fix up those symbols when the literals are |
| later moved into the text sections. */ |
| |
| typedef struct sym_list_struct |
| { |
| struct sym_list_struct *next; |
| symbolS *sym; |
| } sym_list; |
| |
| static sym_list *insn_labels = NULL; |
| static sym_list *free_insn_labels = NULL; |
| static sym_list *saved_insn_labels = NULL; |
| |
| static sym_list *literal_syms; |
| |
| |
| /* Flags to determine whether to prefer const16 or l32r |
| if both options are available. */ |
| int prefer_const16 = 0; |
| int prefer_l32r = 0; |
| |
| /* Global flag to indicate when we are emitting literals. */ |
| int generating_literals = 0; |
| |
| /* The following PROPERTY table definitions are copied from |
| <elf/xtensa.h> and must be kept in sync with the code there. */ |
| |
| /* Flags in the property tables to specify whether blocks of memory |
| are literals, instructions, data, or unreachable. For |
| instructions, blocks that begin loop targets and branch targets are |
| designated. Blocks that do not allow density, instruction |
| reordering or transformation are also specified. Finally, for |
| branch targets, branch target alignment priority is included. |
| Alignment of the next block is specified in the current block |
| and the size of the current block does not include any fill required |
| to align to the next block. */ |
| |
| #define XTENSA_PROP_LITERAL 0x00000001 |
| #define XTENSA_PROP_INSN 0x00000002 |
| #define XTENSA_PROP_DATA 0x00000004 |
| #define XTENSA_PROP_UNREACHABLE 0x00000008 |
| /* Instruction only properties at beginning of code. */ |
| #define XTENSA_PROP_INSN_LOOP_TARGET 0x00000010 |
| #define XTENSA_PROP_INSN_BRANCH_TARGET 0x00000020 |
| /* Instruction only properties about code. */ |
| #define XTENSA_PROP_INSN_NO_DENSITY 0x00000040 |
| #define XTENSA_PROP_INSN_NO_REORDER 0x00000080 |
| #define XTENSA_PROP_INSN_NO_TRANSFORM 0x00000100 |
| |
| /* Branch target alignment information. This transmits information |
| to the linker optimization about the priority of aligning a |
| particular block for branch target alignment: None, low priority, |
| high priority, or required. These only need to be checked in |
| instruction blocks marked as XTENSA_PROP_INSN_BRANCH_TARGET. |
| Common usage is |
| |
| switch (GET_XTENSA_PROP_BT_ALIGN (flags)) |
| case XTENSA_PROP_BT_ALIGN_NONE: |
| case XTENSA_PROP_BT_ALIGN_LOW: |
| case XTENSA_PROP_BT_ALIGN_HIGH: |
| case XTENSA_PROP_BT_ALIGN_REQUIRE: |
| */ |
| #define XTENSA_PROP_BT_ALIGN_MASK 0x00000600 |
| |
| /* No branch target alignment. */ |
| #define XTENSA_PROP_BT_ALIGN_NONE 0x0 |
| /* Low priority branch target alignment. */ |
| #define XTENSA_PROP_BT_ALIGN_LOW 0x1 |
| /* High priority branch target alignment. */ |
| #define XTENSA_PROP_BT_ALIGN_HIGH 0x2 |
| /* Required branch target alignment. */ |
| #define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3 |
| |
| #define GET_XTENSA_PROP_BT_ALIGN(flag) \ |
| (((unsigned) ((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9) |
| #define SET_XTENSA_PROP_BT_ALIGN(flag, align) \ |
| (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \ |
| (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK)) |
| |
| |
| /* Alignment is specified in the block BEFORE the one that needs |
| alignment. Up to 5 bits. Use GET_XTENSA_PROP_ALIGNMENT(flags) to |
| get the required alignment specified as a power of 2. Use |
| SET_XTENSA_PROP_ALIGNMENT(flags, pow2) to set the required |
| alignment. Be careful of side effects since the SET will evaluate |
| flags twice. Also, note that the SIZE of a block in the property |
| table does not include the alignment size, so the alignment fill |
| must be calculated to determine if two blocks are contiguous. |
| TEXT_ALIGN is not currently implemented but is a placeholder for a |
| possible future implementation. */ |
| |
| #define XTENSA_PROP_ALIGN 0x00000800 |
| |
| #define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000 |
| |
| #define GET_XTENSA_PROP_ALIGNMENT(flag) \ |
| (((unsigned) ((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12) |
| #define SET_XTENSA_PROP_ALIGNMENT(flag, align) \ |
| (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \ |
| (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK)) |
| |
| #define XTENSA_PROP_INSN_ABSLIT 0x00020000 |
| |
| |
| /* Structure for saving instruction and alignment per-fragment data |
| that will be written to the object file. This structure is |
| equivalent to the actual data that will be written out to the file |
| but is easier to use. We provide a conversion to file flags |
| in frag_flags_to_number. */ |
| |
| typedef struct frag_flags_struct frag_flags; |
| |
| struct frag_flags_struct |
| { |
| /* is_literal should only be used after xtensa_move_literals. |
| If you need to check if you are generating a literal fragment, |
| then use the generating_literals global. */ |
| |
| unsigned is_literal : 1; |
| unsigned is_insn : 1; |
| unsigned is_data : 1; |
| unsigned is_unreachable : 1; |
| |
| struct |
| { |
| unsigned is_loop_target : 1; |
| unsigned is_branch_target : 1; /* Branch targets have a priority. */ |
| unsigned bt_align_priority : 2; |
| |
| unsigned is_no_density : 1; |
| /* no_longcalls flag does not need to be placed in the object file. */ |
| /* is_specific_opcode implies no_transform. */ |
| unsigned is_no_transform : 1; |
| |
| unsigned is_no_reorder : 1; |
| |
| /* Uses absolute literal addressing for l32r. */ |
| unsigned is_abslit : 1; |
| } insn; |
| unsigned is_align : 1; |
| unsigned alignment : 5; |
| }; |
| |
| |
| /* Structure for saving information about a block of property data |
| for frags that have the same flags. */ |
| struct xtensa_block_info_struct |
| { |
| segT sec; |
| bfd_vma offset; |
| size_t size; |
| frag_flags flags; |
| struct xtensa_block_info_struct *next; |
| }; |
| |
| |
| /* Structure for saving the current state before emitting literals. */ |
| typedef struct emit_state_struct |
| { |
| const char *name; |
| segT now_seg; |
| subsegT now_subseg; |
| int generating_literals; |
| } emit_state; |
| |
| |
| /* Opcode placement information */ |
| |
| typedef unsigned long long bitfield; |
| #define bit_is_set(bit, bf) ((bf) & (0x01ll << (bit))) |
| #define set_bit(bit, bf) ((bf) |= (0x01ll << (bit))) |
| #define clear_bit(bit, bf) ((bf) &= ~(0x01ll << (bit))) |
| |
| #define MAX_FORMATS 32 |
| |
| typedef struct op_placement_info_struct |
| { |
| int num_formats; |
| /* A number describing how restrictive the issue is for this |
| opcode. For example, an opcode that fits lots of different |
| formats has a high freedom, as does an opcode that fits |
| only one format but many slots in that format. The most |
| restrictive is the opcode that fits only one slot in one |
| format. */ |
| int issuef; |
| xtensa_format narrowest; |
| char narrowest_size; |
| char narrowest_slot; |
| |
| /* formats is a bitfield with the Nth bit set |
| if the opcode fits in the Nth xtensa_format. */ |
| bitfield formats; |
| |
| /* slots[N]'s Mth bit is set if the op fits in the |
| Mth slot of the Nth xtensa_format. */ |
| bitfield slots[MAX_FORMATS]; |
| |
| /* A count of the number of slots in a given format |
| an op can fit (i.e., the bitcount of the slot field above). */ |
| char slots_in_format[MAX_FORMATS]; |
| |
| } op_placement_info, *op_placement_info_table; |
| |
| op_placement_info_table op_placement_table; |
| |
| |
| /* Extra expression types. */ |
| |
| #define O_pltrel O_md1 /* like O_symbol but use a PLT reloc */ |
| #define O_hi16 O_md2 /* use high 16 bits of symbolic value */ |
| #define O_lo16 O_md3 /* use low 16 bits of symbolic value */ |
| |
| |
| /* Directives. */ |
| |
| typedef enum |
| { |
| directive_none = 0, |
| directive_literal, |
| directive_density, |
| directive_transform, |
| directive_freeregs, |
| directive_longcalls, |
| directive_literal_prefix, |
| directive_schedule, |
| directive_absolute_literals, |
| directive_last_directive |
| } directiveE; |
| |
| typedef struct |
| { |
| const char *name; |
| bfd_boolean can_be_negated; |
| } directive_infoS; |
| |
| const directive_infoS directive_info[] = |
| { |
| { "none", FALSE }, |
| { "literal", FALSE }, |
| { "density", TRUE }, |
| { "transform", TRUE }, |
| { "freeregs", FALSE }, |
| { "longcalls", TRUE }, |
| { "literal_prefix", FALSE }, |
| { "schedule", TRUE }, |
| { "absolute-literals", TRUE } |
| }; |
| |
| bfd_boolean directive_state[] = |
| { |
| FALSE, /* none */ |
| FALSE, /* literal */ |
| #if !XCHAL_HAVE_DENSITY |
| FALSE, /* density */ |
| #else |
| TRUE, /* density */ |
| #endif |
| TRUE, /* transform */ |
| FALSE, /* freeregs */ |
| FALSE, /* longcalls */ |
| FALSE, /* literal_prefix */ |
| TRUE, /* schedule */ |
| #if XSHAL_USE_ABSOLUTE_LITERALS |
| TRUE /* absolute_literals */ |
| #else |
| FALSE /* absolute_literals */ |
| #endif |
| }; |
| |
| |
| /* Directive functions. */ |
| |
| static void xtensa_begin_directive (int); |
| static void xtensa_end_directive (int); |
| static void xtensa_literal_prefix (char const *, int); |
| static void xtensa_literal_position (int); |
| static void xtensa_literal_pseudo (int); |
| static void xtensa_frequency_pseudo (int); |
| static void xtensa_elf_cons (int); |
| |
| /* Parsing and Idiom Translation. */ |
| |
| static bfd_reloc_code_real_type xtensa_elf_suffix (char **, expressionS *); |
| |
| /* Various Other Internal Functions. */ |
| |
| extern bfd_boolean xg_is_single_relaxable_insn (TInsn *, TInsn *, bfd_boolean); |
| static bfd_boolean xg_build_to_insn (TInsn *, TInsn *, BuildInstr *); |
| static void xtensa_mark_literal_pool_location (void); |
| static addressT get_expanded_loop_offset (xtensa_opcode); |
| static fragS *get_literal_pool_location (segT); |
| static void set_literal_pool_location (segT, fragS *); |
| static void xtensa_set_frag_assembly_state (fragS *); |
| static void finish_vinsn (vliw_insn *); |
| static bfd_boolean emit_single_op (TInsn *); |
| static int total_frag_text_expansion (fragS *); |
| |
| /* Alignment Functions. */ |
| |
| static int get_text_align_power (unsigned); |
| static int get_text_align_max_fill_size (int, bfd_boolean, bfd_boolean); |
| static int branch_align_power (segT); |
| |
| /* Helpers for xtensa_relax_frag(). */ |
| |
| static long relax_frag_add_nop (fragS *); |
| |
| /* Accessors for additional per-subsegment information. */ |
| |
| static unsigned get_last_insn_flags (segT, subsegT); |
| static void set_last_insn_flags (segT, subsegT, unsigned, bfd_boolean); |
| static float get_subseg_total_freq (segT, subsegT); |
| static float get_subseg_target_freq (segT, subsegT); |
| static void set_subseg_freq (segT, subsegT, float, float); |
| |
| /* Segment list functions. */ |
| |
| static void xtensa_move_literals (void); |
| static void xtensa_reorder_segments (void); |
| static void xtensa_switch_to_literal_fragment (emit_state *); |
| static void xtensa_switch_to_non_abs_literal_fragment (emit_state *); |
| static void xtensa_switch_section_emit_state (emit_state *, segT, subsegT); |
| static void xtensa_restore_emit_state (emit_state *); |
| static void cache_literal_section |
| (seg_list *, const char *, segT *, bfd_boolean); |
| |
| /* Import from elf32-xtensa.c in BFD library. */ |
| |
| extern char *xtensa_get_property_section_name (asection *, const char *); |
| |
| /* op_placement_info functions. */ |
| |
| static void init_op_placement_info_table (void); |
| extern bfd_boolean opcode_fits_format_slot (xtensa_opcode, xtensa_format, int); |
| static int xg_get_single_size (xtensa_opcode); |
| static xtensa_format xg_get_single_format (xtensa_opcode); |
| static int xg_get_single_slot (xtensa_opcode); |
| |
| /* TInsn and IStack functions. */ |
| |
| static bfd_boolean tinsn_has_symbolic_operands (const TInsn *); |
| static bfd_boolean tinsn_has_invalid_symbolic_operands (const TInsn *); |
| static bfd_boolean tinsn_has_complex_operands (const TInsn *); |
| static bfd_boolean tinsn_to_insnbuf (TInsn *, xtensa_insnbuf); |
| static bfd_boolean tinsn_check_arguments (const TInsn *); |
| static void tinsn_from_chars (TInsn *, char *, int); |
| static void tinsn_immed_from_frag (TInsn *, fragS *, int); |
| static int get_num_stack_text_bytes (IStack *); |
| static int get_num_stack_literal_bytes (IStack *); |
| |
| /* vliw_insn functions. */ |
| |
| static void xg_init_vinsn (vliw_insn *); |
| static void xg_clear_vinsn (vliw_insn *); |
| static bfd_boolean vinsn_has_specific_opcodes (vliw_insn *); |
| static void xg_free_vinsn (vliw_insn *); |
| static bfd_boolean vinsn_to_insnbuf |
| (vliw_insn *, char *, fragS *, bfd_boolean); |
| static void vinsn_from_chars (vliw_insn *, char *); |
| |
| /* Expression Utilities. */ |
| |
| bfd_boolean expr_is_const (const expressionS *); |
| offsetT get_expr_const (const expressionS *); |
| void set_expr_const (expressionS *, offsetT); |
| bfd_boolean expr_is_register (const expressionS *); |
| offsetT get_expr_register (const expressionS *); |
| void set_expr_symbol_offset (expressionS *, symbolS *, offsetT); |
| bfd_boolean expr_is_equal (expressionS *, expressionS *); |
| static void copy_expr (expressionS *, const expressionS *); |
| |
| /* Section renaming. */ |
| |
| static void build_section_rename (const char *); |
| |
| |
| /* ISA imported from bfd. */ |
| extern xtensa_isa xtensa_default_isa; |
| |
| extern int target_big_endian; |
| |
| static xtensa_opcode xtensa_addi_opcode; |
| static xtensa_opcode xtensa_addmi_opcode; |
| static xtensa_opcode xtensa_call0_opcode; |
| static xtensa_opcode xtensa_call4_opcode; |
| static xtensa_opcode xtensa_call8_opcode; |
| static xtensa_opcode xtensa_call12_opcode; |
| static xtensa_opcode xtensa_callx0_opcode; |
| static xtensa_opcode xtensa_callx4_opcode; |
| static xtensa_opcode xtensa_callx8_opcode; |
| static xtensa_opcode xtensa_callx12_opcode; |
| static xtensa_opcode xtensa_const16_opcode; |
| static xtensa_opcode xtensa_entry_opcode; |
| static xtensa_opcode xtensa_movi_opcode; |
| static xtensa_opcode xtensa_movi_n_opcode; |
| static xtensa_opcode xtensa_isync_opcode; |
| static xtensa_opcode xtensa_jx_opcode; |
| static xtensa_opcode xtensa_l32r_opcode; |
| static xtensa_opcode xtensa_loop_opcode; |
| static xtensa_opcode xtensa_loopnez_opcode; |
| static xtensa_opcode xtensa_loopgtz_opcode; |
| static xtensa_opcode xtensa_nop_opcode; |
| static xtensa_opcode xtensa_nop_n_opcode; |
| static xtensa_opcode xtensa_or_opcode; |
| static xtensa_opcode xtensa_ret_opcode; |
| static xtensa_opcode xtensa_ret_n_opcode; |
| static xtensa_opcode xtensa_retw_opcode; |
| static xtensa_opcode xtensa_retw_n_opcode; |
| static xtensa_opcode xtensa_rsr_lcount_opcode; |
| static xtensa_opcode xtensa_waiti_opcode; |
| |
| |
| /* Command-line Options. */ |
| |
| bfd_boolean use_literal_section = TRUE; |
| static bfd_boolean align_targets = TRUE; |
| static bfd_boolean warn_unaligned_branch_targets = FALSE; |
| static bfd_boolean has_a0_b_retw = FALSE; |
| static bfd_boolean workaround_a0_b_retw = FALSE; |
| static bfd_boolean workaround_b_j_loop_end = FALSE; |
| static bfd_boolean workaround_short_loop = FALSE; |
| static bfd_boolean maybe_has_short_loop = FALSE; |
| static bfd_boolean workaround_close_loop_end = FALSE; |
| static bfd_boolean maybe_has_close_loop_end = FALSE; |
| static bfd_boolean enforce_three_byte_loop_align = FALSE; |
| |
| /* When workaround_short_loops is TRUE, all loops with early exits must |
| have at least 3 instructions. workaround_all_short_loops is a modifier |
| to the workaround_short_loop flag. In addition to the |
| workaround_short_loop actions, all straightline loopgtz and loopnez |
| must have at least 3 instructions. */ |
| |
| static bfd_boolean workaround_all_short_loops = FALSE; |
| |
| |
| static void |
| xtensa_setup_hw_workarounds (int earliest, int latest) |
| { |
| if (earliest > latest) |
| as_fatal (_("illegal range of target hardware versions")); |
| |
| /* Enable all workarounds for pre-T1050.0 hardware. */ |
| if (earliest < 105000 || latest < 105000) |
| { |
| workaround_a0_b_retw |= TRUE; |
| workaround_b_j_loop_end |= TRUE; |
| workaround_short_loop |= TRUE; |
| workaround_close_loop_end |= TRUE; |
| workaround_all_short_loops |= TRUE; |
| enforce_three_byte_loop_align = TRUE; |
| } |
| } |
| |
| |
| enum |
| { |
| option_density = OPTION_MD_BASE, |
| option_no_density, |
| |
| option_relax, |
| option_no_relax, |
| |
| option_link_relax, |
| option_no_link_relax, |
| |
| option_generics, |
| option_no_generics, |
| |
| option_transform, |
| option_no_transform, |
| |
| option_text_section_literals, |
| option_no_text_section_literals, |
| |
| option_absolute_literals, |
| option_no_absolute_literals, |
| |
| option_align_targets, |
| option_no_align_targets, |
| |
| option_warn_unaligned_targets, |
| |
| option_longcalls, |
| option_no_longcalls, |
| |
| option_workaround_a0_b_retw, |
| option_no_workaround_a0_b_retw, |
| |
| option_workaround_b_j_loop_end, |
| option_no_workaround_b_j_loop_end, |
| |
| option_workaround_short_loop, |
| option_no_workaround_short_loop, |
| |
| option_workaround_all_short_loops, |
| option_no_workaround_all_short_loops, |
| |
| option_workaround_close_loop_end, |
| option_no_workaround_close_loop_end, |
| |
| option_no_workarounds, |
| |
| option_rename_section_name, |
| |
| option_prefer_l32r, |
| option_prefer_const16, |
| |
| option_target_hardware |
| }; |
| |
| const char *md_shortopts = ""; |
| |
| struct option md_longopts[] = |
| { |
| { "density", no_argument, NULL, option_density }, |
| { "no-density", no_argument, NULL, option_no_density }, |
| |
| /* Both "relax" and "generics" are deprecated and treated as equivalent |
| to the "transform" option. */ |
| { "relax", no_argument, NULL, option_relax }, |
| { "no-relax", no_argument, NULL, option_no_relax }, |
| { "generics", no_argument, NULL, option_generics }, |
| { "no-generics", no_argument, NULL, option_no_generics }, |
| |
| { "transform", no_argument, NULL, option_transform }, |
| { "no-transform", no_argument, NULL, option_no_transform }, |
| { "text-section-literals", no_argument, NULL, option_text_section_literals }, |
| { "no-text-section-literals", no_argument, NULL, |
| option_no_text_section_literals }, |
| { "absolute-literals", no_argument, NULL, option_absolute_literals }, |
| { "no-absolute-literals", no_argument, NULL, option_no_absolute_literals }, |
| /* This option was changed from -align-target to -target-align |
| because it conflicted with the "-al" option. */ |
| { "target-align", no_argument, NULL, option_align_targets }, |
| { "no-target-align", no_argument, NULL, option_no_align_targets }, |
| { "warn-unaligned-targets", no_argument, NULL, |
| option_warn_unaligned_targets }, |
| { "longcalls", no_argument, NULL, option_longcalls }, |
| { "no-longcalls", no_argument, NULL, option_no_longcalls }, |
| |
| { "no-workaround-a0-b-retw", no_argument, NULL, |
| option_no_workaround_a0_b_retw }, |
| { "workaround-a0-b-retw", no_argument, NULL, option_workaround_a0_b_retw }, |
| |
| { "no-workaround-b-j-loop-end", no_argument, NULL, |
| option_no_workaround_b_j_loop_end }, |
| { "workaround-b-j-loop-end", no_argument, NULL, |
| option_workaround_b_j_loop_end }, |
| |
| { "no-workaround-short-loops", no_argument, NULL, |
| option_no_workaround_short_loop }, |
| { "workaround-short-loops", no_argument, NULL, |
| option_workaround_short_loop }, |
| |
| { "no-workaround-all-short-loops", no_argument, NULL, |
| option_no_workaround_all_short_loops }, |
| { "workaround-all-short-loop", no_argument, NULL, |
| option_workaround_all_short_loops }, |
| |
| { "prefer-l32r", no_argument, NULL, option_prefer_l32r }, |
| { "prefer-const16", no_argument, NULL, option_prefer_const16 }, |
| |
| { "no-workarounds", no_argument, NULL, option_no_workarounds }, |
| |
| { "no-workaround-close-loop-end", no_argument, NULL, |
| option_no_workaround_close_loop_end }, |
| { "workaround-close-loop-end", no_argument, NULL, |
| option_workaround_close_loop_end }, |
| |
| { "rename-section", required_argument, NULL, option_rename_section_name }, |
| |
| { "link-relax", no_argument, NULL, option_link_relax }, |
| { "no-link-relax", no_argument, NULL, option_no_link_relax }, |
| |
| { "target-hardware", required_argument, NULL, option_target_hardware }, |
| |
| { NULL, no_argument, NULL, 0 } |
| }; |
| |
| size_t md_longopts_size = sizeof md_longopts; |
| |
| |
| int |
| md_parse_option (int c, char *arg) |
| { |
| switch (c) |
| { |
| case option_density: |
| as_warn (_("--density option is ignored")); |
| return 1; |
| case option_no_density: |
| as_warn (_("--no-density option is ignored")); |
| return 1; |
| case option_link_relax: |
| linkrelax = 1; |
| return 1; |
| case option_no_link_relax: |
| linkrelax = 0; |
| return 1; |
| case option_generics: |
| as_warn (_("--generics is deprecated; use --transform instead")); |
| return md_parse_option (option_transform, arg); |
| case option_no_generics: |
| as_warn (_("--no-generics is deprecated; use --no-transform instead")); |
| return md_parse_option (option_no_transform, arg); |
| case option_relax: |
| as_warn (_("--relax is deprecated; use --transform instead")); |
| return md_parse_option (option_transform, arg); |
| case option_no_relax: |
| as_warn (_("--no-relax is deprecated; use --no-transform instead")); |
| return md_parse_option (option_no_transform, arg); |
| case option_longcalls: |
| directive_state[directive_longcalls] = TRUE; |
| return 1; |
| case option_no_longcalls: |
| directive_state[directive_longcalls] = FALSE; |
| return 1; |
| case option_text_section_literals: |
| use_literal_section = FALSE; |
| return 1; |
| case option_no_text_section_literals: |
| use_literal_section = TRUE; |
| return 1; |
| case option_absolute_literals: |
| if (!absolute_literals_supported) |
| { |
| as_fatal (_("--absolute-literals option not supported in this Xtensa configuration")); |
| return 0; |
| } |
| directive_state[directive_absolute_literals] = TRUE; |
| return 1; |
| case option_no_absolute_literals: |
| directive_state[directive_absolute_literals] = FALSE; |
| return 1; |
| |
| case option_workaround_a0_b_retw: |
| workaround_a0_b_retw = TRUE; |
| return 1; |
| case option_no_workaround_a0_b_retw: |
| workaround_a0_b_retw = FALSE; |
| return 1; |
| case option_workaround_b_j_loop_end: |
| workaround_b_j_loop_end = TRUE; |
| return 1; |
| case option_no_workaround_b_j_loop_end: |
| workaround_b_j_loop_end = FALSE; |
| return 1; |
| |
| case option_workaround_short_loop: |
| workaround_short_loop = TRUE; |
| return 1; |
| case option_no_workaround_short_loop: |
| workaround_short_loop = FALSE; |
| return 1; |
| |
| case option_workaround_all_short_loops: |
| workaround_all_short_loops = TRUE; |
| return 1; |
| case option_no_workaround_all_short_loops: |
| workaround_all_short_loops = FALSE; |
| return 1; |
| |
| case option_workaround_close_loop_end: |
| workaround_close_loop_end = TRUE; |
| return 1; |
| case option_no_workaround_close_loop_end: |
| workaround_close_loop_end = FALSE; |
| return 1; |
| |
| case option_no_workarounds: |
| workaround_a0_b_retw = FALSE; |
| workaround_b_j_loop_end = FALSE; |
| workaround_short_loop = FALSE; |
| workaround_all_short_loops = FALSE; |
| workaround_close_loop_end = FALSE; |
| return 1; |
| |
| case option_align_targets: |
| align_targets = TRUE; |
| return 1; |
| case option_no_align_targets: |
| align_targets = FALSE; |
| return 1; |
| |
| case option_warn_unaligned_targets: |
| warn_unaligned_branch_targets = TRUE; |
| return 1; |
| |
| case option_rename_section_name: |
| build_section_rename (arg); |
| return 1; |
| |
| case 'Q': |
| /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section |
| should be emitted or not. FIXME: Not implemented. */ |
| return 1; |
| |
| case option_prefer_l32r: |
| if (prefer_const16) |
| as_fatal (_("prefer-l32r conflicts with prefer-const16")); |
| prefer_l32r = 1; |
| return 1; |
| |
| case option_prefer_const16: |
| if (prefer_l32r) |
| as_fatal (_("prefer-const16 conflicts with prefer-l32r")); |
| prefer_const16 = 1; |
| return 1; |
| |
| case option_target_hardware: |
| { |
| int earliest, latest = 0; |
| if (*arg == 0 || *arg == '-') |
| as_fatal (_("invalid target hardware version")); |
| |
| earliest = strtol (arg, &arg, 0); |
| |
| if (*arg == 0) |
| latest = earliest; |
| else if (*arg == '-') |
| { |
| if (*++arg == 0) |
| as_fatal (_("invalid target hardware version")); |
| latest = strtol (arg, &arg, 0); |
| } |
| if (*arg != 0) |
| as_fatal (_("invalid target hardware version")); |
| |
| xtensa_setup_hw_workarounds (earliest, latest); |
| return 1; |
| } |
| |
| case option_transform: |
| /* This option has no affect other than to use the defaults, |
| which are already set. */ |
| return 1; |
| |
| case option_no_transform: |
| /* This option turns off all transformations of any kind. |
| However, because we want to preserve the state of other |
| directives, we only change its own field. Thus, before |
| you perform any transformation, always check if transform |
| is available. If you use the functions we provide for this |
| purpose, you will be ok. */ |
| directive_state[directive_transform] = FALSE; |
| return 1; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| |
| void |
| md_show_usage (FILE *stream) |
| { |
| fputs ("\n\ |
| Xtensa options:\n\ |
| --[no-]text-section-literals\n\ |
| [Do not] put literals in the text section\n\ |
| --[no-]absolute-literals\n\ |
| [Do not] default to use non-PC-relative literals\n\ |
| --[no-]target-align [Do not] try to align branch targets\n\ |
| --[no-]longcalls [Do not] emit 32-bit call sequences\n\ |
| --[no-]transform [Do not] transform instructions\n\ |
| --rename-section old=new Rename section 'old' to 'new'\n", stream); |
| } |
| |
| |
| /* Functions related to the list of current label symbols. */ |
| |
| static void |
| xtensa_add_insn_label (symbolS *sym) |
| { |
| sym_list *l; |
| |
| if (!free_insn_labels) |
| l = (sym_list *) xmalloc (sizeof (sym_list)); |
| else |
| { |
| l = free_insn_labels; |
| free_insn_labels = l->next; |
| } |
| |
| l->sym = sym; |
| l->next = insn_labels; |
| insn_labels = l; |
| } |
| |
| |
| static void |
| xtensa_clear_insn_labels (void) |
| { |
| sym_list **pl; |
| |
| for (pl = &free_insn_labels; *pl != NULL; pl = &(*pl)->next) |
| ; |
| *pl = insn_labels; |
| insn_labels = NULL; |
| } |
| |
| |
| /* The "loops_ok" argument is provided to allow ignoring labels that |
| define loop ends. This fixes a bug where the NOPs to align a |
| loop opcode were included in a previous zero-cost loop: |
| |
| loop a0, loopend |
| <loop1 body> |
| loopend: |
| |
| loop a2, loopend2 |
| <loop2 body> |
| |
| would become: |
| |
| loop a0, loopend |
| <loop1 body> |
| nop.n <===== bad! |
| loopend: |
| |
| loop a2, loopend2 |
| <loop2 body> |
| |
| This argument is used to prevent moving the NOP to before the |
| loop-end label, which is what you want in this special case. */ |
| |
| static void |
| xtensa_move_labels (fragS *new_frag, valueT new_offset, bfd_boolean loops_ok) |
| { |
| sym_list *lit; |
| |
| for (lit = insn_labels; lit; lit = lit->next) |
| { |
| symbolS *lit_sym = lit->sym; |
| if (loops_ok || ! symbol_get_tc (lit_sym)->is_loop_target) |
| { |
| S_SET_VALUE (lit_sym, new_offset); |
| symbol_set_frag (lit_sym, new_frag); |
| } |
| } |
| } |
| |
| |
| /* Directive data and functions. */ |
| |
| typedef struct state_stackS_struct |
| { |
| directiveE directive; |
| bfd_boolean negated; |
| bfd_boolean old_state; |
| const char *file; |
| unsigned int line; |
| const void *datum; |
| struct state_stackS_struct *prev; |
| } state_stackS; |
| |
| state_stackS *directive_state_stack; |
| |
| const pseudo_typeS md_pseudo_table[] = |
| { |
| { "align", s_align_bytes, 0 }, /* Defaulting is invalid (0). */ |
| { "literal_position", xtensa_literal_position, 0 }, |
| { "frame", s_ignore, 0 }, /* Formerly used for STABS debugging. */ |
| { "long", xtensa_elf_cons, 4 }, |
| { "word", xtensa_elf_cons, 4 }, |
| { "short", xtensa_elf_cons, 2 }, |
| { "begin", xtensa_begin_directive, 0 }, |
| { "end", xtensa_end_directive, 0 }, |
| { "literal", xtensa_literal_pseudo, 0 }, |
| { "frequency", xtensa_frequency_pseudo, 0 }, |
| { NULL, 0, 0 }, |
| }; |
| |
| |
| static bfd_boolean |
| use_transform (void) |
| { |
| /* After md_end, you should be checking frag by frag, rather |
| than state directives. */ |
| assert (!past_xtensa_end); |
| return directive_state[directive_transform]; |
| } |
| |
| |
| static bfd_boolean |
| do_align_targets (void) |
| { |
| /* Do not use this function after md_end; just look at align_targets |
| instead. There is no target-align directive, so alignment is either |
| enabled for all frags or not done at all. */ |
| assert (!past_xtensa_end); |
| return align_targets && use_transform (); |
| } |
| |
| |
| static void |
| directive_push (directiveE directive, bfd_boolean negated, const void *datum) |
| { |
| char *file; |
| unsigned int line; |
| state_stackS *stack = (state_stackS *) xmalloc (sizeof (state_stackS)); |
| |
| as_where (&file, &line); |
| |
| stack->directive = directive; |
| stack->negated = negated; |
| stack->old_state = directive_state[directive]; |
| stack->file = file; |
| stack->line = line; |
| stack->datum = datum; |
| stack->prev = directive_state_stack; |
| directive_state_stack = stack; |
| |
| directive_state[directive] = !negated; |
| } |
| |
| |
| static void |
| directive_pop (directiveE *directive, |
| bfd_boolean *negated, |
| const char **file, |
| unsigned int *line, |
| const void **datum) |
| { |
| state_stackS *top = directive_state_stack; |
| |
| if (!directive_state_stack) |
| { |
| as_bad (_("unmatched end directive")); |
| *directive = directive_none; |
| return; |
| } |
| |
| directive_state[directive_state_stack->directive] = top->old_state; |
| *directive = top->directive; |
| *negated = top->negated; |
| *file = top->file; |
| *line = top->line; |
| *datum = top->datum; |
| directive_state_stack = top->prev; |
| free (top); |
| } |
| |
| |
| static void |
| directive_balance (void) |
| { |
| while (directive_state_stack) |
| { |
| directiveE directive; |
| bfd_boolean negated; |
| const char *file; |
| unsigned int line; |
| const void *datum; |
| |
| directive_pop (&directive, &negated, &file, &line, &datum); |
| as_warn_where ((char *) file, line, |
| _(".begin directive with no matching .end directive")); |
| } |
| } |
| |
| |
| static bfd_boolean |
| inside_directive (directiveE dir) |
| { |
| state_stackS *top = directive_state_stack; |
| |
| while (top && top->directive != dir) |
| top = top->prev; |
| |
| return (top != NULL); |
| } |
| |
| |
| static void |
| get_directive (directiveE *directive, bfd_boolean *negated) |
| { |
| int len; |
| unsigned i; |
| char *directive_string; |
| |
| if (strncmp (input_line_pointer, "no-", 3) != 0) |
| *negated = FALSE; |
| else |
| { |
| *negated = TRUE; |
| input_line_pointer += 3; |
| } |
| |
| len = strspn (input_line_pointer, |
| "abcdefghijklmnopqrstuvwxyz_-/0123456789."); |
| |
| /* This code is a hack to make .begin [no-][generics|relax] exactly |
| equivalent to .begin [no-]transform. We should remove it when |
| we stop accepting those options. */ |
| |
| if (strncmp (input_line_pointer, "generics", strlen ("generics")) == 0) |
| { |
| as_warn (_("[no-]generics is deprecated; use [no-]transform instead")); |
| directive_string = "transform"; |
| } |
| else if (strncmp (input_line_pointer, "relax", strlen ("relax")) == 0) |
| { |
| as_warn (_("[no-]relax is deprecated; use [no-]transform instead")); |
| directive_string = "transform"; |
| } |
| else |
| directive_string = input_line_pointer; |
| |
| for (i = 0; i < sizeof (directive_info) / sizeof (*directive_info); ++i) |
| { |
| if (strncmp (directive_string, directive_info[i].name, len) == 0) |
| { |
| input_line_pointer += len; |
| *directive = (directiveE) i; |
| if (*negated && !directive_info[i].can_be_negated) |
| as_bad (_("directive %s cannot be negated"), |
| directive_info[i].name); |
| return; |
| } |
| } |
| |
| as_bad (_("unknown directive")); |
| *directive = (directiveE) XTENSA_UNDEFINED; |
| } |
| |
| |
| static void |
| xtensa_begin_directive (int ignore ATTRIBUTE_UNUSED) |
| { |
| directiveE directive; |
| bfd_boolean negated; |
| emit_state *state; |
| int len; |
| lit_state *ls; |
| |
| get_directive (&directive, &negated); |
| if (directive == (directiveE) XTENSA_UNDEFINED) |
| { |
| discard_rest_of_line (); |
| return; |
| } |
| |
| if (cur_vinsn.inside_bundle) |
| as_bad (_("directives are not valid inside bundles")); |
| |
| switch (directive) |
| { |
| case directive_literal: |
| if (!inside_directive (directive_literal)) |
| { |
| /* Previous labels go with whatever follows this directive, not with |
| the literal, so save them now. */ |
| saved_insn_labels = insn_labels; |
| insn_labels = NULL; |
| } |
| as_warn (_(".begin literal is deprecated; use .literal instead")); |
| state = (emit_state *) xmalloc (sizeof (emit_state)); |
| xtensa_switch_to_literal_fragment (state); |
| directive_push (directive_literal, negated, state); |
| break; |
| |
| case directive_literal_prefix: |
| /* Have to flush pending output because a movi relaxed to an l32r |
| might produce a literal. */ |
| md_flush_pending_output (); |
| /* Check to see if the current fragment is a literal |
| fragment. If it is, then this operation is not allowed. */ |
| if (generating_literals) |
| { |
| as_bad (_("cannot set literal_prefix inside literal fragment")); |
| return; |
| } |
| |
| /* Allocate the literal state for this section and push |
| onto the directive stack. */ |
| ls = xmalloc (sizeof (lit_state)); |
| assert (ls); |
| |
| *ls = default_lit_sections; |
| |
| directive_push (directive_literal_prefix, negated, ls); |
| |
| /* Parse the new prefix from the input_line_pointer. */ |
| SKIP_WHITESPACE (); |
| len = strspn (input_line_pointer, |
| "ABCDEFGHIJKLMNOPQRSTUVWXYZ" |
| "abcdefghijklmnopqrstuvwxyz_/0123456789.$"); |
| |
| /* Process the new prefix. */ |
| xtensa_literal_prefix (input_line_pointer, len); |
| |
| /* Skip the name in the input line. */ |
| input_line_pointer += len; |
| break; |
| |
| case directive_freeregs: |
| /* This information is currently unused, but we'll accept the statement |
| and just discard the rest of the line. This won't check the syntax, |
| but it will accept every correct freeregs directive. */ |
| input_line_pointer += strcspn (input_line_pointer, "\n"); |
| directive_push (directive_freeregs, negated, 0); |
| break; |
| |
| case directive_schedule: |
| md_flush_pending_output (); |
| frag_var (rs_fill, 0, 0, frag_now->fr_subtype, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| directive_push (directive_schedule, negated, 0); |
| xtensa_set_frag_assembly_state (frag_now); |
| break; |
| |
| case directive_density: |
| as_warn (_(".begin [no-]density is ignored")); |
| break; |
| |
| case directive_absolute_literals: |
| md_flush_pending_output (); |
| if (!absolute_literals_supported && !negated) |
| { |
| as_warn (_("Xtensa absolute literals option not supported; ignored")); |
| break; |
| } |
| xtensa_set_frag_assembly_state (frag_now); |
| directive_push (directive, negated, 0); |
| break; |
| |
| default: |
| md_flush_pending_output (); |
| xtensa_set_frag_assembly_state (frag_now); |
| directive_push (directive, negated, 0); |
| break; |
| } |
| |
| demand_empty_rest_of_line (); |
| } |
| |
| |
| static void |
| xtensa_end_directive (int ignore ATTRIBUTE_UNUSED) |
| { |
| directiveE begin_directive, end_directive; |
| bfd_boolean begin_negated, end_negated; |
| const char *file; |
| unsigned int line; |
| emit_state *state; |
| emit_state **state_ptr; |
| lit_state *s; |
| |
| if (cur_vinsn.inside_bundle) |
| as_bad (_("directives are not valid inside bundles")); |
| |
| get_directive (&end_directive, &end_negated); |
| |
| md_flush_pending_output (); |
| |
| switch (end_directive) |
| { |
| case (directiveE) XTENSA_UNDEFINED: |
| discard_rest_of_line (); |
| return; |
| |
| case directive_density: |
| as_warn (_(".end [no-]density is ignored")); |
| demand_empty_rest_of_line (); |
| break; |
| |
| case directive_absolute_literals: |
| if (!absolute_literals_supported && !end_negated) |
| { |
| as_warn (_("Xtensa absolute literals option not supported; ignored")); |
| demand_empty_rest_of_line (); |
| return; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| state_ptr = &state; /* use state_ptr to avoid type-punning warning */ |
| directive_pop (&begin_directive, &begin_negated, &file, &line, |
| (const void **) state_ptr); |
| |
| if (begin_directive != directive_none) |
| { |
| if (begin_directive != end_directive || begin_negated != end_negated) |
| { |
| as_bad (_("does not match begin %s%s at %s:%d"), |
| begin_negated ? "no-" : "", |
| directive_info[begin_directive].name, file, line); |
| } |
| else |
| { |
| switch (end_directive) |
| { |
| case directive_literal: |
| frag_var (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_restore_emit_state (state); |
| xtensa_set_frag_assembly_state (frag_now); |
| free (state); |
| if (!inside_directive (directive_literal)) |
| { |
| /* Restore the list of current labels. */ |
| xtensa_clear_insn_labels (); |
| insn_labels = saved_insn_labels; |
| } |
| break; |
| |
| case directive_literal_prefix: |
| /* Restore the default collection sections from saved state. */ |
| s = (lit_state *) state; |
| assert (s); |
| |
| default_lit_sections = *s; |
| |
| /* free the state storage */ |
| free (s); |
| break; |
| |
| case directive_schedule: |
| case directive_freeregs: |
| break; |
| |
| default: |
| xtensa_set_frag_assembly_state (frag_now); |
| break; |
| } |
| } |
| } |
| |
| demand_empty_rest_of_line (); |
| } |
| |
| |
| /* Place an aligned literal fragment at the current location. */ |
| |
| static void |
| xtensa_literal_position (int ignore ATTRIBUTE_UNUSED) |
| { |
| md_flush_pending_output (); |
| |
| if (inside_directive (directive_literal)) |
| as_warn (_(".literal_position inside literal directive; ignoring")); |
| xtensa_mark_literal_pool_location (); |
| |
| demand_empty_rest_of_line (); |
| xtensa_clear_insn_labels (); |
| } |
| |
| |
| /* Support .literal label, expr, ... */ |
| |
| static void |
| xtensa_literal_pseudo (int ignored ATTRIBUTE_UNUSED) |
| { |
| emit_state state; |
| char *p, *base_name; |
| char c; |
| segT dest_seg; |
| |
| if (inside_directive (directive_literal)) |
| { |
| as_bad (_(".literal not allowed inside .begin literal region")); |
| ignore_rest_of_line (); |
| return; |
| } |
| |
| md_flush_pending_output (); |
| |
| /* Previous labels go with whatever follows this directive, not with |
| the literal, so save them now. */ |
| saved_insn_labels = insn_labels; |
| insn_labels = NULL; |
| |
| /* If we are using text-section literals, then this is the right value... */ |
| dest_seg = now_seg; |
| |
| base_name = input_line_pointer; |
| |
| xtensa_switch_to_literal_fragment (&state); |
| |
| /* ...but if we aren't using text-section-literals, then we |
| need to put them in the section we just switched to. */ |
| if (use_literal_section || directive_state[directive_absolute_literals]) |
| dest_seg = now_seg; |
| |
| /* All literals are aligned to four-byte boundaries. */ |
| frag_align (2, 0, 0); |
| record_alignment (now_seg, 2); |
| |
| c = get_symbol_end (); |
| /* Just after name is now '\0'. */ |
| p = input_line_pointer; |
| *p = c; |
| SKIP_WHITESPACE (); |
| |
| if (*input_line_pointer != ',' && *input_line_pointer != ':') |
| { |
| as_bad (_("expected comma or colon after symbol name; " |
| "rest of line ignored")); |
| ignore_rest_of_line (); |
| xtensa_restore_emit_state (&state); |
| return; |
| } |
| *p = 0; |
| |
| colon (base_name); |
| |
| *p = c; |
| input_line_pointer++; /* skip ',' or ':' */ |
| |
| xtensa_elf_cons (4); |
| |
| xtensa_restore_emit_state (&state); |
| |
| /* Restore the list of current labels. */ |
| xtensa_clear_insn_labels (); |
| insn_labels = saved_insn_labels; |
| } |
| |
| |
| static void |
| xtensa_literal_prefix (char const *start, int len) |
| { |
| char *name, *linkonce_suffix; |
| char *newname, *newname4; |
| size_t linkonce_len; |
| |
| /* Get a null-terminated copy of the name. */ |
| name = xmalloc (len + 1); |
| assert (name); |
| |
| strncpy (name, start, len); |
| name[len] = 0; |
| |
| /* Allocate the sections (interesting note: the memory pointing to |
| the name is actually used for the name by the new section). */ |
| |
| newname = xmalloc (len + strlen (".literal") + 1); |
| newname4 = xmalloc (len + strlen (".lit4") + 1); |
| |
| linkonce_len = sizeof (".gnu.linkonce.") - 1; |
| if (strncmp (name, ".gnu.linkonce.", linkonce_len) == 0 |
| && (linkonce_suffix = strchr (name + linkonce_len, '.')) != 0) |
| { |
| strcpy (newname, ".gnu.linkonce.literal"); |
| strcpy (newname4, ".gnu.linkonce.lit4"); |
| |
| strcat (newname, linkonce_suffix); |
| strcat (newname4, linkonce_suffix); |
| } |
| else |
| { |
| int suffix_pos = len; |
| |
| /* If the section name ends with ".text", then replace that suffix |
| instead of appending an additional suffix. */ |
| if (len >= 5 && strcmp (name + len - 5, ".text") == 0) |
| suffix_pos -= 5; |
| |
| strcpy (newname, name); |
| strcpy (newname4, name); |
| |
| strcpy (newname + suffix_pos, ".literal"); |
| strcpy (newname4 + suffix_pos, ".lit4"); |
| } |
| |
| /* Note that cache_literal_section does not create a segment if |
| it already exists. */ |
| default_lit_sections.lit_seg = NULL; |
| default_lit_sections.lit4_seg = NULL; |
| |
| /* Canonicalizing section names allows renaming literal |
| sections to occur correctly. */ |
| default_lit_sections.lit_seg_name = tc_canonicalize_symbol_name (newname); |
| default_lit_sections.lit4_seg_name = tc_canonicalize_symbol_name (newname4); |
| |
| free (name); |
| } |
| |
| |
| /* Support ".frequency branch_target_frequency fall_through_frequency". */ |
| |
| static void |
| xtensa_frequency_pseudo (int ignored ATTRIBUTE_UNUSED) |
| { |
| float fall_through_f, target_f; |
| |
| fall_through_f = (float) strtod (input_line_pointer, &input_line_pointer); |
| if (fall_through_f < 0) |
| { |
| as_bad (_("fall through frequency must be greater than 0")); |
| ignore_rest_of_line (); |
| return; |
| } |
| |
| target_f = (float) strtod (input_line_pointer, &input_line_pointer); |
| if (target_f < 0) |
| { |
| as_bad (_("branch target frequency must be greater than 0")); |
| ignore_rest_of_line (); |
| return; |
| } |
| |
| set_subseg_freq (now_seg, now_subseg, target_f + fall_through_f, target_f); |
| |
| demand_empty_rest_of_line (); |
| } |
| |
| |
| /* Like normal .long/.short/.word, except support @plt, etc. |
| Clobbers input_line_pointer, checks end-of-line. */ |
| |
| static void |
| xtensa_elf_cons (int nbytes) |
| { |
| expressionS exp; |
| bfd_reloc_code_real_type reloc; |
| |
| md_flush_pending_output (); |
| |
| if (cur_vinsn.inside_bundle) |
| as_bad (_("directives are not valid inside bundles")); |
| |
| if (is_it_end_of_statement ()) |
| { |
| demand_empty_rest_of_line (); |
| return; |
| } |
| |
| do |
| { |
| expression (&exp); |
| if (exp.X_op == O_symbol |
| && *input_line_pointer == '@' |
| && ((reloc = xtensa_elf_suffix (&input_line_pointer, &exp)) |
| != BFD_RELOC_NONE)) |
| { |
| reloc_howto_type *reloc_howto = |
| bfd_reloc_type_lookup (stdoutput, reloc); |
| |
| if (reloc == BFD_RELOC_UNUSED || !reloc_howto) |
| as_bad (_("unsupported relocation")); |
| else if ((reloc >= BFD_RELOC_XTENSA_SLOT0_OP |
| && reloc <= BFD_RELOC_XTENSA_SLOT14_OP) |
| || (reloc >= BFD_RELOC_XTENSA_SLOT0_ALT |
| && reloc <= BFD_RELOC_XTENSA_SLOT14_ALT)) |
| as_bad (_("opcode-specific %s relocation used outside " |
| "an instruction"), reloc_howto->name); |
| else if (nbytes != (int) bfd_get_reloc_size (reloc_howto)) |
| as_bad (_("%s relocations do not fit in %d bytes"), |
| reloc_howto->name, nbytes); |
| else |
| { |
| char *p = frag_more ((int) nbytes); |
| xtensa_set_frag_assembly_state (frag_now); |
| fix_new_exp (frag_now, p - frag_now->fr_literal, |
| nbytes, &exp, 0, reloc); |
| } |
| } |
| else |
| emit_expr (&exp, (unsigned int) nbytes); |
| } |
| while (*input_line_pointer++ == ','); |
| |
| input_line_pointer--; /* Put terminator back into stream. */ |
| demand_empty_rest_of_line (); |
| } |
| |
| |
| /* Parsing and Idiom Translation. */ |
| |
| /* Parse @plt, etc. and return the desired relocation. */ |
| static bfd_reloc_code_real_type |
| xtensa_elf_suffix (char **str_p, expressionS *exp_p) |
| { |
| struct map_bfd |
| { |
| char *string; |
| int length; |
| bfd_reloc_code_real_type reloc; |
| }; |
| |
| char ident[20]; |
| char *str = *str_p; |
| char *str2; |
| int ch; |
| int len; |
| struct map_bfd *ptr; |
| |
| #define MAP(str,reloc) { str, sizeof (str) - 1, reloc } |
| |
| static struct map_bfd mapping[] = |
| { |
| MAP ("l", BFD_RELOC_LO16), |
| MAP ("h", BFD_RELOC_HI16), |
| MAP ("plt", BFD_RELOC_XTENSA_PLT), |
| { (char *) 0, 0, BFD_RELOC_UNUSED } |
| }; |
| |
| if (*str++ != '@') |
| return BFD_RELOC_NONE; |
| |
| for (ch = *str, str2 = ident; |
| (str2 < ident + sizeof (ident) - 1 |
| && (ISALNUM (ch) || ch == '@')); |
| ch = *++str) |
| { |
| *str2++ = (ISLOWER (ch)) ? ch : TOLOWER (ch); |
| } |
| |
| *str2 = '\0'; |
| len = str2 - ident; |
| |
| ch = ident[0]; |
| for (ptr = &mapping[0]; ptr->length > 0; ptr++) |
| if (ch == ptr->string[0] |
| && len == ptr->length |
| && memcmp (ident, ptr->string, ptr->length) == 0) |
| { |
| /* Now check for "identifier@suffix+constant". */ |
| if (*str == '-' || *str == '+') |
| { |
| char *orig_line = input_line_pointer; |
| expressionS new_exp; |
| |
| input_line_pointer = str; |
| expression (&new_exp); |
| if (new_exp.X_op == O_constant) |
| { |
| exp_p->X_add_number += new_exp.X_add_number; |
| str = input_line_pointer; |
| } |
| |
| if (&input_line_pointer != str_p) |
| input_line_pointer = orig_line; |
| } |
| |
| *str_p = str; |
| return ptr->reloc; |
| } |
| |
| return BFD_RELOC_UNUSED; |
| } |
| |
| |
| static const char * |
| expression_end (const char *name) |
| { |
| while (1) |
| { |
| switch (*name) |
| { |
| case '}': |
| case ';': |
| case '\0': |
| case ',': |
| case ':': |
| return name; |
| case ' ': |
| case '\t': |
| ++name; |
| continue; |
| default: |
| return 0; |
| } |
| } |
| } |
| |
| |
| #define ERROR_REG_NUM ((unsigned) -1) |
| |
| static unsigned |
| tc_get_register (const char *prefix) |
| { |
| unsigned reg; |
| const char *next_expr; |
| const char *old_line_pointer; |
| |
| SKIP_WHITESPACE (); |
| old_line_pointer = input_line_pointer; |
| |
| if (*input_line_pointer == '$') |
| ++input_line_pointer; |
| |
| /* Accept "sp" as a synonym for "a1". */ |
| if (input_line_pointer[0] == 's' && input_line_pointer[1] == 'p' |
| && expression_end (input_line_pointer + 2)) |
| { |
| input_line_pointer += 2; |
| return 1; /* AR[1] */ |
| } |
| |
| while (*input_line_pointer++ == *prefix++) |
| ; |
| --input_line_pointer; |
| --prefix; |
| |
| if (*prefix) |
| { |
| as_bad (_("bad register name: %s"), old_line_pointer); |
| return ERROR_REG_NUM; |
| } |
| |
| if (!ISDIGIT ((unsigned char) *input_line_pointer)) |
| { |
| as_bad (_("bad register number: %s"), input_line_pointer); |
| return ERROR_REG_NUM; |
| } |
| |
| reg = 0; |
| |
| while (ISDIGIT ((int) *input_line_pointer)) |
| reg = reg * 10 + *input_line_pointer++ - '0'; |
| |
| if (!(next_expr = expression_end (input_line_pointer))) |
| { |
| as_bad (_("bad register name: %s"), old_line_pointer); |
| return ERROR_REG_NUM; |
| } |
| |
| input_line_pointer = (char *) next_expr; |
| |
| return reg; |
| } |
| |
| |
| static void |
| expression_maybe_register (xtensa_opcode opc, int opnd, expressionS *tok) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| |
| /* Check if this is an immediate operand. */ |
| if (xtensa_operand_is_register (isa, opc, opnd) == 0) |
| { |
| bfd_reloc_code_real_type reloc; |
| segT t = expression (tok); |
| if (t == absolute_section |
| && xtensa_operand_is_PCrelative (isa, opc, opnd) == 1) |
| { |
| assert (tok->X_op == O_constant); |
| tok->X_op = O_symbol; |
| tok->X_add_symbol = &abs_symbol; |
| } |
| |
| if ((tok->X_op == O_constant || tok->X_op == O_symbol) |
| && (reloc = xtensa_elf_suffix (&input_line_pointer, tok)) |
| && (reloc != BFD_RELOC_NONE)) |
| { |
| switch (reloc) |
| { |
| default: |
| case BFD_RELOC_UNUSED: |
| as_bad (_("unsupported relocation")); |
| break; |
| |
| case BFD_RELOC_XTENSA_PLT: |
| tok->X_op = O_pltrel; |
| break; |
| |
| case BFD_RELOC_LO16: |
| if (tok->X_op == O_constant) |
| tok->X_add_number &= 0xffff; |
| else |
| tok->X_op = O_lo16; |
| break; |
| |
| case BFD_RELOC_HI16: |
| if (tok->X_op == O_constant) |
| tok->X_add_number = ((unsigned) tok->X_add_number) >> 16; |
| else |
| tok->X_op = O_hi16; |
| break; |
| } |
| } |
| } |
| else |
| { |
| xtensa_regfile opnd_rf = xtensa_operand_regfile (isa, opc, opnd); |
| unsigned reg = tc_get_register (xtensa_regfile_shortname (isa, opnd_rf)); |
| |
| if (reg != ERROR_REG_NUM) /* Already errored */ |
| { |
| uint32 buf = reg; |
| if (xtensa_operand_encode (isa, opc, opnd, &buf)) |
| as_bad (_("register number out of range")); |
| } |
| |
| tok->X_op = O_register; |
| tok->X_add_symbol = 0; |
| tok->X_add_number = reg; |
| } |
| } |
| |
| |
| /* Split up the arguments for an opcode or pseudo-op. */ |
| |
| static int |
| tokenize_arguments (char **args, char *str) |
| { |
| char *old_input_line_pointer; |
| bfd_boolean saw_comma = FALSE; |
| bfd_boolean saw_arg = FALSE; |
| bfd_boolean saw_colon = FALSE; |
| int num_args = 0; |
| char *arg_end, *arg; |
| int arg_len; |
| |
| /* Save and restore input_line_pointer around this function. */ |
| old_input_line_pointer = input_line_pointer; |
| input_line_pointer = str; |
| |
| while (*input_line_pointer) |
| { |
| SKIP_WHITESPACE (); |
| switch (*input_line_pointer) |
| { |
| case '\0': |
| case '}': |
| goto fini; |
| |
| case ':': |
| input_line_pointer++; |
| if (saw_comma || saw_colon || !saw_arg) |
| goto err; |
| saw_colon = TRUE; |
| break; |
| |
| case ',': |
| input_line_pointer++; |
| if (saw_comma || saw_colon || !saw_arg) |
| goto err; |
| saw_comma = TRUE; |
| break; |
| |
| default: |
| if (!saw_comma && !saw_colon && saw_arg) |
| goto err; |
| |
| arg_end = input_line_pointer + 1; |
| while (!expression_end (arg_end)) |
| arg_end += 1; |
| |
| arg_len = arg_end - input_line_pointer; |
| arg = (char *) xmalloc ((saw_colon ? 1 : 0) + arg_len + 1); |
| args[num_args] = arg; |
| |
| if (saw_colon) |
| *arg++ = ':'; |
| strncpy (arg, input_line_pointer, arg_len); |
| arg[arg_len] = '\0'; |
| |
| input_line_pointer = arg_end; |
| num_args += 1; |
| saw_comma = FALSE; |
| saw_colon = FALSE; |
| saw_arg = TRUE; |
| break; |
| } |
| } |
| |
| fini: |
| if (saw_comma || saw_colon) |
| goto err; |
| input_line_pointer = old_input_line_pointer; |
| return num_args; |
| |
| err: |
| if (saw_comma) |
| as_bad (_("extra comma")); |
| else if (saw_colon) |
| as_bad (_("extra colon")); |
| else if (!saw_arg) |
| as_bad (_("missing argument")); |
| else |
| as_bad (_("missing comma or colon")); |
| input_line_pointer = old_input_line_pointer; |
| return -1; |
| } |
| |
| |
| /* Parse the arguments to an opcode. Return TRUE on error. */ |
| |
| static bfd_boolean |
| parse_arguments (TInsn *insn, int num_args, char **arg_strings) |
| { |
| expressionS *tok, *last_tok; |
| xtensa_opcode opcode = insn->opcode; |
| bfd_boolean had_error = TRUE; |
| xtensa_isa isa = xtensa_default_isa; |
| int n, num_regs = 0; |
| int opcode_operand_count; |
| int opnd_cnt, last_opnd_cnt; |
| unsigned int next_reg = 0; |
| char *old_input_line_pointer; |
| |
| if (insn->insn_type == ITYPE_LITERAL) |
| opcode_operand_count = 1; |
| else |
| opcode_operand_count = xtensa_opcode_num_operands (isa, opcode); |
| |
| tok = insn->tok; |
| memset (tok, 0, sizeof (*tok) * MAX_INSN_ARGS); |
| |
| /* Save and restore input_line_pointer around this function. */ |
| old_input_line_pointer = input_line_pointer; |
| |
| last_tok = 0; |
| last_opnd_cnt = -1; |
| opnd_cnt = 0; |
| |
| /* Skip invisible operands. */ |
| while (xtensa_operand_is_visible (isa, opcode, opnd_cnt) == 0) |
| { |
| opnd_cnt += 1; |
| tok++; |
| } |
| |
| for (n = 0; n < num_args; n++) |
| { |
| input_line_pointer = arg_strings[n]; |
| if (*input_line_pointer == ':') |
| { |
| xtensa_regfile opnd_rf; |
| input_line_pointer++; |
| if (num_regs == 0) |
| goto err; |
| assert (opnd_cnt > 0); |
| num_regs--; |
| opnd_rf = xtensa_operand_regfile (isa, opcode, last_opnd_cnt); |
| if (next_reg |
| != tc_get_register (xtensa_regfile_shortname (isa, opnd_rf))) |
| as_warn (_("incorrect register number, ignoring")); |
| next_reg++; |
| } |
| else |
| { |
| if (opnd_cnt >= opcode_operand_count) |
| { |
| as_warn (_("too many arguments")); |
| goto err; |
| } |
| assert (opnd_cnt < MAX_INSN_ARGS); |
| |
| expression_maybe_register (opcode, opnd_cnt, tok); |
| next_reg = tok->X_add_number + 1; |
| |
| if (tok->X_op == O_illegal || tok->X_op == O_absent) |
| goto err; |
| if (xtensa_operand_is_register (isa, opcode, opnd_cnt) == 1) |
| { |
| num_regs = xtensa_operand_num_regs (isa, opcode, opnd_cnt) - 1; |
| /* minus 1 because we are seeing one right now */ |
| } |
| else |
| num_regs = 0; |
| |
| last_tok = tok; |
| last_opnd_cnt = opnd_cnt; |
| |
| do |
| { |
| opnd_cnt += 1; |
| tok++; |
| } |
| while (xtensa_operand_is_visible (isa, opcode, opnd_cnt) == 0); |
| } |
| } |
| |
| if (num_regs > 0 && ((int) next_reg != last_tok->X_add_number + 1)) |
| goto err; |
| |
| insn->ntok = tok - insn->tok; |
| had_error = FALSE; |
| |
| err: |
| input_line_pointer = old_input_line_pointer; |
| return had_error; |
| } |
| |
| |
| static int |
| get_invisible_operands (TInsn *insn) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| static xtensa_insnbuf slotbuf = NULL; |
| xtensa_format fmt; |
| xtensa_opcode opc = insn->opcode; |
| int slot, opnd, fmt_found; |
| unsigned val; |
| |
| if (!slotbuf) |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| |
| /* Find format/slot where this can be encoded. */ |
| fmt_found = 0; |
| slot = 0; |
| for (fmt = 0; fmt < xtensa_isa_num_formats (isa); fmt++) |
| { |
| for (slot = 0; slot < xtensa_format_num_slots (isa, fmt); slot++) |
| { |
| if (xtensa_opcode_encode (isa, fmt, slot, slotbuf, opc) == 0) |
| { |
| fmt_found = 1; |
| break; |
| } |
| } |
| if (fmt_found) break; |
| } |
| |
| if (!fmt_found) |
| { |
| as_bad (_("cannot encode opcode \"%s\""), xtensa_opcode_name (isa, opc)); |
| return -1; |
| } |
| |
| /* First encode all the visible operands |
| (to deal with shared field operands). */ |
| for (opnd = 0; opnd < insn->ntok; opnd++) |
| { |
| if (xtensa_operand_is_visible (isa, opc, opnd) == 1 |
| && (insn->tok[opnd].X_op == O_register |
| || insn->tok[opnd].X_op == O_constant)) |
| { |
| val = insn->tok[opnd].X_add_number; |
| xtensa_operand_encode (isa, opc, opnd, &val); |
| xtensa_operand_set_field (isa, opc, opnd, fmt, slot, slotbuf, val); |
| } |
| } |
| |
| /* Then pull out the values for the invisible ones. */ |
| for (opnd = 0; opnd < insn->ntok; opnd++) |
| { |
| if (xtensa_operand_is_visible (isa, opc, opnd) == 0) |
| { |
| xtensa_operand_get_field (isa, opc, opnd, fmt, slot, slotbuf, &val); |
| xtensa_operand_decode (isa, opc, opnd, &val); |
| insn->tok[opnd].X_add_number = val; |
| if (xtensa_operand_is_register (isa, opc, opnd) == 1) |
| insn->tok[opnd].X_op = O_register; |
| else |
| insn->tok[opnd].X_op = O_constant; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| static void |
| xg_reverse_shift_count (char **cnt_argp) |
| { |
| char *cnt_arg, *new_arg; |
| cnt_arg = *cnt_argp; |
| |
| /* replace the argument with "31-(argument)" */ |
| new_arg = (char *) xmalloc (strlen (cnt_arg) + 6); |
| sprintf (new_arg, "31-(%s)", cnt_arg); |
| |
| free (cnt_arg); |
| *cnt_argp = new_arg; |
| } |
| |
| |
| /* If "arg" is a constant expression, return non-zero with the value |
| in *valp. */ |
| |
| static int |
| xg_arg_is_constant (char *arg, offsetT *valp) |
| { |
| expressionS exp; |
| char *save_ptr = input_line_pointer; |
| |
| input_line_pointer = arg; |
| expression (&exp); |
| input_line_pointer = save_ptr; |
| |
| if (exp.X_op == O_constant) |
| { |
| *valp = exp.X_add_number; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void |
| xg_replace_opname (char **popname, char *newop) |
| { |
| free (*popname); |
| *popname = (char *) xmalloc (strlen (newop) + 1); |
| strcpy (*popname, newop); |
| } |
| |
| |
| static int |
| xg_check_num_args (int *pnum_args, |
| int expected_num, |
| char *opname, |
| char **arg_strings) |
| { |
| int num_args = *pnum_args; |
| |
| if (num_args < expected_num) |
| { |
| as_bad (_("not enough operands (%d) for '%s'; expected %d"), |
| num_args, opname, expected_num); |
| return -1; |
| } |
| |
| if (num_args > expected_num) |
| { |
| as_warn (_("too many operands (%d) for '%s'; expected %d"), |
| num_args, opname, expected_num); |
| while (num_args-- > expected_num) |
| { |
| free (arg_strings[num_args]); |
| arg_strings[num_args] = 0; |
| } |
| *pnum_args = expected_num; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* If the register is not specified as part of the opcode, |
| then get it from the operand and move it to the opcode. */ |
| |
| static int |
| xg_translate_sysreg_op (char **popname, int *pnum_args, char **arg_strings) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_sysreg sr; |
| char *opname, *new_opname; |
| const char *sr_name; |
| int is_user, is_write; |
| |
| opname = *popname; |
| if (*opname == '_') |
| opname += 1; |
| is_user = (opname[1] == 'u'); |
| is_write = (opname[0] == 'w'); |
| |
| /* Opname == [rw]ur or [rwx]sr... */ |
| |
| if (xg_check_num_args (pnum_args, 2, opname, arg_strings)) |
| return -1; |
| |
| /* Check if the argument is a symbolic register name. */ |
| sr = xtensa_sysreg_lookup_name (isa, arg_strings[1]); |
| /* Handle WSR to "INTSET" as a special case. */ |
| if (sr == XTENSA_UNDEFINED && is_write && !is_user |
| && !strcasecmp (arg_strings[1], "intset")) |
| sr = xtensa_sysreg_lookup_name (isa, "interrupt"); |
| if (sr == XTENSA_UNDEFINED |
| || (xtensa_sysreg_is_user (isa, sr) == 1) != is_user) |
| { |
| /* Maybe it's a register number.... */ |
| offsetT val; |
| if (!xg_arg_is_constant (arg_strings[1], &val)) |
| { |
| as_bad (_("invalid register '%s' for '%s' instruction"), |
| arg_strings[1], opname); |
| return -1; |
| } |
| sr = xtensa_sysreg_lookup (isa, val, is_user); |
| if (sr == XTENSA_UNDEFINED) |
| { |
| as_bad (_("invalid register number (%ld) for '%s' instruction"), |
| (long) val, opname); |
| return -1; |
| } |
| } |
| |
| /* Remove the last argument, which is now part of the opcode. */ |
| free (arg_strings[1]); |
| arg_strings[1] = 0; |
| *pnum_args = 1; |
| |
| /* Translate the opcode. */ |
| sr_name = xtensa_sysreg_name (isa, sr); |
| /* Another special case for "WSR.INTSET".... */ |
| if (is_write && !is_user && !strcasecmp ("interrupt", sr_name)) |
| sr_name = "intset"; |
| new_opname = (char *) xmalloc (strlen (sr_name) + 6); |
| sprintf (new_opname, "%s.%s", *popname, sr_name); |
| free (*popname); |
| *popname = new_opname; |
| |
| return 0; |
| } |
| |
| |
| static int |
| xtensa_translate_old_userreg_ops (char **popname) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_sysreg sr; |
| char *opname, *new_opname; |
| const char *sr_name; |
| bfd_boolean has_underbar = FALSE; |
| |
| opname = *popname; |
| if (opname[0] == '_') |
| { |
| has_underbar = TRUE; |
| opname += 1; |
| } |
| |
| sr = xtensa_sysreg_lookup_name (isa, opname + 1); |
| if (sr != XTENSA_UNDEFINED) |
| { |
| /* The new default name ("nnn") is different from the old default |
| name ("URnnn"). The old default is handled below, and we don't |
| want to recognize [RW]nnn, so do nothing if the name is the (new) |
| default. */ |
| static char namebuf[10]; |
| sprintf (namebuf, "%d", xtensa_sysreg_number (isa, sr)); |
| if (strcmp (namebuf, opname + 1) == 0) |
| return 0; |
| } |
| else |
| { |
| offsetT val; |
| char *end; |
| |
| /* Only continue if the reg name is "URnnn". */ |
| if (opname[1] != 'u' || opname[2] != 'r') |
| return 0; |
| val = strtoul (opname + 3, &end, 10); |
| if (*end != '\0') |
| return 0; |
| |
| sr = xtensa_sysreg_lookup (isa, val, 1); |
| if (sr == XTENSA_UNDEFINED) |
| { |
| as_bad (_("invalid register number (%ld) for '%s'"), |
| (long) val, opname); |
| return -1; |
| } |
| } |
| |
| /* Translate the opcode. */ |
| sr_name = xtensa_sysreg_name (isa, sr); |
| new_opname = (char *) xmalloc (strlen (sr_name) + 6); |
| sprintf (new_opname, "%s%cur.%s", (has_underbar ? "_" : ""), |
| opname[0], sr_name); |
| free (*popname); |
| *popname = new_opname; |
| |
| return 0; |
| } |
| |
| |
| static int |
| xtensa_translate_zero_immed (char *old_op, |
| char *new_op, |
| char **popname, |
| int *pnum_args, |
| char **arg_strings) |
| { |
| char *opname; |
| offsetT val; |
| |
| opname = *popname; |
| assert (opname[0] != '_'); |
| |
| if (strcmp (opname, old_op) != 0) |
| return 0; |
| |
| if (xg_check_num_args (pnum_args, 3, opname, arg_strings)) |
| return -1; |
| if (xg_arg_is_constant (arg_strings[1], &val) && val == 0) |
| { |
| xg_replace_opname (popname, new_op); |
| free (arg_strings[1]); |
| arg_strings[1] = arg_strings[2]; |
| arg_strings[2] = 0; |
| *pnum_args = 2; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* If the instruction is an idiom (i.e., a built-in macro), translate it. |
| Returns non-zero if an error was found. */ |
| |
| static int |
| xg_translate_idioms (char **popname, int *pnum_args, char **arg_strings) |
| { |
| char *opname = *popname; |
| bfd_boolean has_underbar = FALSE; |
| |
| if (cur_vinsn.inside_bundle) |
| return 0; |
| |
| if (*opname == '_') |
| { |
| has_underbar = TRUE; |
| opname += 1; |
| } |
| |
| if (strcmp (opname, "mov") == 0) |
| { |
| if (use_transform () && !has_underbar && density_supported) |
| xg_replace_opname (popname, "mov.n"); |
| else |
| { |
| if (xg_check_num_args (pnum_args, 2, opname, arg_strings)) |
| return -1; |
| xg_replace_opname (popname, (has_underbar ? "_or" : "or")); |
| arg_strings[2] = (char *) xmalloc (strlen (arg_strings[1]) + 1); |
| strcpy (arg_strings[2], arg_strings[1]); |
| *pnum_args = 3; |
| } |
| return 0; |
| } |
| |
| if (strcmp (opname, "bbsi.l") == 0) |
| { |
| if (xg_check_num_args (pnum_args, 3, opname, arg_strings)) |
| return -1; |
| xg_replace_opname (popname, (has_underbar ? "_bbsi" : "bbsi")); |
| if (target_big_endian) |
| xg_reverse_shift_count (&arg_strings[1]); |
| return 0; |
| } |
| |
| if (strcmp (opname, "bbci.l") == 0) |
| { |
| if (xg_check_num_args (pnum_args, 3, opname, arg_strings)) |
| return -1; |
| xg_replace_opname (popname, (has_underbar ? "_bbci" : "bbci")); |
| if (target_big_endian) |
| xg_reverse_shift_count (&arg_strings[1]); |
| return 0; |
| } |
| |
| if (xtensa_nop_opcode == XTENSA_UNDEFINED |
| && strcmp (opname, "nop") == 0) |
| { |
| if (use_transform () && !has_underbar && density_supported) |
| xg_replace_opname (popname, "nop.n"); |
| else |
| { |
| if (xg_check_num_args (pnum_args, 0, opname, arg_strings)) |
| return -1; |
| xg_replace_opname (popname, (has_underbar ? "_or" : "or")); |
| arg_strings[0] = (char *) xmalloc (3); |
| arg_strings[1] = (char *) xmalloc (3); |
| arg_strings[2] = (char *) xmalloc (3); |
| strcpy (arg_strings[0], "a1"); |
| strcpy (arg_strings[1], "a1"); |
| strcpy (arg_strings[2], "a1"); |
| *pnum_args = 3; |
| } |
| return 0; |
| } |
| |
| /* Recognize [RW]UR and [RWX]SR. */ |
| if ((((opname[0] == 'r' || opname[0] == 'w') |
| && (opname[1] == 'u' || opname[1] == 's')) |
| || (opname[0] == 'x' && opname[1] == 's')) |
| && opname[2] == 'r' |
| && opname[3] == '\0') |
| return xg_translate_sysreg_op (popname, pnum_args, arg_strings); |
| |
| /* Backward compatibility for RUR and WUR: Recognize [RW]UR<nnn> and |
| [RW]<name> if <name> is the non-default name of a user register. */ |
| if ((opname[0] == 'r' || opname[0] == 'w') |
| && xtensa_opcode_lookup (xtensa_default_isa, opname) == XTENSA_UNDEFINED) |
| return xtensa_translate_old_userreg_ops (popname); |
| |
| /* Relax branches that don't allow comparisons against an immediate value |
| of zero to the corresponding branches with implicit zero immediates. */ |
| if (!has_underbar && use_transform ()) |
| { |
| if (xtensa_translate_zero_immed ("bnei", "bnez", popname, |
| pnum_args, arg_strings)) |
| return -1; |
| |
| if (xtensa_translate_zero_immed ("beqi", "beqz", popname, |
| pnum_args, arg_strings)) |
| return -1; |
| |
| if (xtensa_translate_zero_immed ("bgei", "bgez", popname, |
| pnum_args, arg_strings)) |
| return -1; |
| |
| if (xtensa_translate_zero_immed ("blti", "bltz", popname, |
| pnum_args, arg_strings)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* Functions for dealing with the Xtensa ISA. */ |
| |
| /* Currently the assembler only allows us to use a single target per |
| fragment. Because of this, only one operand for a given |
| instruction may be symbolic. If there is a PC-relative operand, |
| the last one is chosen. Otherwise, the result is the number of the |
| last immediate operand, and if there are none of those, we fail and |
| return -1. */ |
| |
| static int |
| get_relaxable_immed (xtensa_opcode opcode) |
| { |
| int last_immed = -1; |
| int noperands, opi; |
| |
| if (opcode == XTENSA_UNDEFINED) |
| return -1; |
| |
| noperands = xtensa_opcode_num_operands (xtensa_default_isa, opcode); |
| for (opi = noperands - 1; opi >= 0; opi--) |
| { |
| if (xtensa_operand_is_visible (xtensa_default_isa, opcode, opi) == 0) |
| continue; |
| if (xtensa_operand_is_PCrelative (xtensa_default_isa, opcode, opi) == 1) |
| return opi; |
| if (last_immed == -1 |
| && xtensa_operand_is_register (xtensa_default_isa, opcode, opi) == 0) |
| last_immed = opi; |
| } |
| return last_immed; |
| } |
| |
| |
| static xtensa_opcode |
| get_opcode_from_buf (const char *buf, int slot) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| static xtensa_insnbuf slotbuf = NULL; |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_format fmt; |
| |
| if (!insnbuf) |
| { |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| } |
| |
| xtensa_insnbuf_from_chars (isa, insnbuf, (const unsigned char *) buf, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| if (fmt == XTENSA_UNDEFINED) |
| return XTENSA_UNDEFINED; |
| |
| if (slot >= xtensa_format_num_slots (isa, fmt)) |
| return XTENSA_UNDEFINED; |
| |
| xtensa_format_get_slot (isa, fmt, slot, insnbuf, slotbuf); |
| return xtensa_opcode_decode (isa, fmt, slot, slotbuf); |
| } |
| |
| |
| #ifdef TENSILICA_DEBUG |
| |
| /* For debugging, print out the mapping of opcode numbers to opcodes. */ |
| |
| static void |
| xtensa_print_insn_table (void) |
| { |
| int num_opcodes, num_operands; |
| xtensa_opcode opcode; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| num_opcodes = xtensa_isa_num_opcodes (xtensa_default_isa); |
| for (opcode = 0; opcode < num_opcodes; opcode++) |
| { |
| int opn; |
| fprintf (stderr, "%d: %s: ", opcode, xtensa_opcode_name (isa, opcode)); |
| num_operands = xtensa_opcode_num_operands (isa, opcode); |
| for (opn = 0; opn < num_operands; opn++) |
| { |
| if (xtensa_operand_is_visible (isa, opcode, opn) == 0) |
| continue; |
| if (xtensa_operand_is_register (isa, opcode, opn) == 1) |
| { |
| xtensa_regfile opnd_rf = |
| xtensa_operand_regfile (isa, opcode, opn); |
| fprintf (stderr, "%s ", xtensa_regfile_shortname (isa, opnd_rf)); |
| } |
| else if (xtensa_operand_is_PCrelative (isa, opcode, opn) == 1) |
| fputs ("[lLr] ", stderr); |
| else |
| fputs ("i ", stderr); |
| } |
| fprintf (stderr, "\n"); |
| } |
| } |
| |
| |
| static void |
| print_vliw_insn (xtensa_insnbuf vbuf) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_format f = xtensa_format_decode (isa, vbuf); |
| xtensa_insnbuf sbuf = xtensa_insnbuf_alloc (isa); |
| int op; |
| |
| fprintf (stderr, "format = %d\n", f); |
| |
| for (op = 0; op < xtensa_format_num_slots (isa, f); op++) |
| { |
| xtensa_opcode opcode; |
| const char *opname; |
| int operands; |
| |
| xtensa_format_get_slot (isa, f, op, vbuf, sbuf); |
| opcode = xtensa_opcode_decode (isa, f, op, sbuf); |
| opname = xtensa_opcode_name (isa, opcode); |
| |
| fprintf (stderr, "op in slot %i is %s;\n", op, opname); |
| fprintf (stderr, " operands = "); |
| for (operands = 0; |
| operands < xtensa_opcode_num_operands (isa, opcode); |
| operands++) |
| { |
| unsigned int val; |
| if (xtensa_operand_is_visible (isa, opcode, operands) == 0) |
| continue; |
| xtensa_operand_get_field (isa, opcode, operands, f, op, sbuf, &val); |
| xtensa_operand_decode (isa, opcode, operands, &val); |
| fprintf (stderr, "%d ", val); |
| } |
| fprintf (stderr, "\n"); |
| } |
| xtensa_insnbuf_free (isa, sbuf); |
| } |
| |
| #endif /* TENSILICA_DEBUG */ |
| |
| |
| static bfd_boolean |
| is_direct_call_opcode (xtensa_opcode opcode) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int n, num_operands; |
| |
| if (xtensa_opcode_is_call (isa, opcode) == 0) |
| return FALSE; |
| |
| num_operands = xtensa_opcode_num_operands (isa, opcode); |
| for (n = 0; n < num_operands; n++) |
| { |
| if (xtensa_operand_is_register (isa, opcode, n) == 0 |
| && xtensa_operand_is_PCrelative (isa, opcode, n) == 1) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| |
| /* Convert from BFD relocation type code to slot and operand number. |
| Returns non-zero on failure. */ |
| |
| static int |
| decode_reloc (bfd_reloc_code_real_type reloc, int *slot, bfd_boolean *is_alt) |
| { |
| if (reloc >= BFD_RELOC_XTENSA_SLOT0_OP |
| && reloc <= BFD_RELOC_XTENSA_SLOT14_OP) |
| { |
| *slot = reloc - BFD_RELOC_XTENSA_SLOT0_OP; |
| *is_alt = FALSE; |
| } |
| else if (reloc >= BFD_RELOC_XTENSA_SLOT0_ALT |
| && reloc <= BFD_RELOC_XTENSA_SLOT14_ALT) |
| { |
| *slot = reloc - BFD_RELOC_XTENSA_SLOT0_ALT; |
| *is_alt = TRUE; |
| } |
| else |
| return -1; |
| |
| return 0; |
| } |
| |
| |
| /* Convert from slot number to BFD relocation type code for the |
| standard PC-relative relocations. Return BFD_RELOC_NONE on |
| failure. */ |
| |
| static bfd_reloc_code_real_type |
| encode_reloc (int slot) |
| { |
| if (slot < 0 || slot > 14) |
| return BFD_RELOC_NONE; |
| |
| return BFD_RELOC_XTENSA_SLOT0_OP + slot; |
| } |
| |
| |
| /* Convert from slot numbers to BFD relocation type code for the |
| "alternate" relocations. Return BFD_RELOC_NONE on failure. */ |
| |
| static bfd_reloc_code_real_type |
| encode_alt_reloc (int slot) |
| { |
| if (slot < 0 || slot > 14) |
| return BFD_RELOC_NONE; |
| |
| return BFD_RELOC_XTENSA_SLOT0_ALT + slot; |
| } |
| |
| |
| static void |
| xtensa_insnbuf_set_operand (xtensa_insnbuf slotbuf, |
| xtensa_format fmt, |
| int slot, |
| xtensa_opcode opcode, |
| int operand, |
| uint32 value, |
| const char *file, |
| unsigned int line) |
| { |
| uint32 valbuf = value; |
| |
| if (xtensa_operand_encode (xtensa_default_isa, opcode, operand, &valbuf)) |
| { |
| if (xtensa_operand_is_PCrelative (xtensa_default_isa, opcode, operand) |
| == 1) |
| as_bad_where ((char *) file, line, |
| _("operand %d of '%s' has out of range value '%u'"), |
| operand + 1, |
| xtensa_opcode_name (xtensa_default_isa, opcode), |
| value); |
| else |
| as_bad_where ((char *) file, line, |
| _("operand %d of '%s' has invalid value '%u'"), |
| operand + 1, |
| xtensa_opcode_name (xtensa_default_isa, opcode), |
| value); |
| return; |
| } |
| |
| xtensa_operand_set_field (xtensa_default_isa, opcode, operand, fmt, slot, |
| slotbuf, valbuf); |
| } |
| |
| |
| static uint32 |
| xtensa_insnbuf_get_operand (xtensa_insnbuf slotbuf, |
| xtensa_format fmt, |
| int slot, |
| xtensa_opcode opcode, |
| int opnum) |
| { |
| uint32 val = 0; |
| (void) xtensa_operand_get_field (xtensa_default_isa, opcode, opnum, |
| fmt, slot, slotbuf, &val); |
| (void) xtensa_operand_decode (xtensa_default_isa, opcode, opnum, &val); |
| return val; |
| } |
| |
| |
| /* Checks for rules from xtensa-relax tables. */ |
| |
| /* The routine xg_instruction_matches_option_term must return TRUE |
| when a given option term is true. The meaning of all of the option |
| terms is given interpretation by this function. This is needed when |
| an option depends on the state of a directive, but there are no such |
| options in use right now. */ |
| |
| static bfd_boolean |
| xg_instruction_matches_option_term (TInsn *insn ATTRIBUTE_UNUSED, |
| const ReqOrOption *option) |
| { |
| if (strcmp (option->option_name, "realnop") == 0 |
| || strncmp (option->option_name, "IsaUse", 6) == 0) |
| { |
| /* These conditions were evaluated statically when building the |
| relaxation table. There's no need to reevaluate them now. */ |
| return TRUE; |
| } |
| else |
| { |
| as_fatal (_("internal error: unknown option name '%s'"), |
| option->option_name); |
| } |
| } |
| |
| |
| static bfd_boolean |
| xg_instruction_matches_or_options (TInsn *insn, |
| const ReqOrOptionList *or_option) |
| { |
| const ReqOrOption *option; |
| /* Must match each of the AND terms. */ |
| for (option = or_option; option != NULL; option = option->next) |
| { |
| if (xg_instruction_matches_option_term (insn, option)) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| xg_instruction_matches_options (TInsn *insn, const ReqOptionList *options) |
| { |
| const ReqOption *req_options; |
| /* Must match each of the AND terms. */ |
| for (req_options = options; |
| req_options != NULL; |
| req_options = req_options->next) |
| { |
| /* Must match one of the OR clauses. */ |
| if (!xg_instruction_matches_or_options (insn, |
| req_options->or_option_terms)) |
| return FALSE; |
| } |
| return TRUE; |
| } |
| |
| |
| /* Return the transition rule that matches or NULL if none matches. */ |
| |
| static bfd_boolean |
| xg_instruction_matches_rule (TInsn *insn, TransitionRule *rule) |
| { |
| PreconditionList *condition_l; |
| |
| if (rule->opcode != insn->opcode) |
| return FALSE; |
| |
| for (condition_l = rule->conditions; |
| condition_l != NULL; |
| condition_l = condition_l->next) |
| { |
| expressionS *exp1; |
| expressionS *exp2; |
| Precondition *cond = condition_l->precond; |
| |
| switch (cond->typ) |
| { |
| case OP_CONSTANT: |
| /* The expression must be the constant. */ |
| assert (cond->op_num < insn->ntok); |
| exp1 = &insn->tok[cond->op_num]; |
| if (expr_is_const (exp1)) |
| { |
| switch (cond->cmp) |
| { |
| case OP_EQUAL: |
| if (get_expr_const (exp1) != cond->op_data) |
| return FALSE; |
| break; |
| case OP_NOTEQUAL: |
| if (get_expr_const (exp1) == cond->op_data) |
| return FALSE; |
| break; |
| default: |
| return FALSE; |
| } |
| } |
| else if (expr_is_register (exp1)) |
| { |
| switch (cond->cmp) |
| { |
| case OP_EQUAL: |
| if (get_expr_register (exp1) != cond->op_data) |
| return FALSE; |
| break; |
| case OP_NOTEQUAL: |
| if (get_expr_register (exp1) == cond->op_data) |
| return FALSE; |
| break; |
| default: |
| return FALSE; |
| } |
| } |
| else |
| return FALSE; |
| break; |
| |
| case OP_OPERAND: |
| assert (cond->op_num < insn->ntok); |
| assert (cond->op_data < insn->ntok); |
| exp1 = &insn->tok[cond->op_num]; |
| exp2 = &insn->tok[cond->op_data]; |
| |
| switch (cond->cmp) |
| { |
| case OP_EQUAL: |
| if (!expr_is_equal (exp1, exp2)) |
| return FALSE; |
| break; |
| case OP_NOTEQUAL: |
| if (expr_is_equal (exp1, exp2)) |
| return FALSE; |
| break; |
| } |
| break; |
| |
| case OP_LITERAL: |
| case OP_LABEL: |
| default: |
| return FALSE; |
| } |
| } |
| if (!xg_instruction_matches_options (insn, rule->options)) |
| return FALSE; |
| |
| return TRUE; |
| } |
| |
| |
| static int |
| transition_rule_cmp (const TransitionRule *a, const TransitionRule *b) |
| { |
| bfd_boolean a_greater = FALSE; |
| bfd_boolean b_greater = FALSE; |
| |
| ReqOptionList *l_a = a->options; |
| ReqOptionList *l_b = b->options; |
| |
| /* We only care if they both are the same except for |
| a const16 vs. an l32r. */ |
| |
| while (l_a && l_b && ((l_a->next == NULL) == (l_b->next == NULL))) |
| { |
| ReqOrOptionList *l_or_a = l_a->or_option_terms; |
| ReqOrOptionList *l_or_b = l_b->or_option_terms; |
| while (l_or_a && l_or_b && ((l_a->next == NULL) == (l_b->next == NULL))) |
| { |
| if (l_or_a->is_true != l_or_b->is_true) |
| return 0; |
| if (strcmp (l_or_a->option_name, l_or_b->option_name) != 0) |
| { |
| /* This is the case we care about. */ |
| if (strcmp (l_or_a->option_name, "IsaUseConst16") == 0 |
| && strcmp (l_or_b->option_name, "IsaUseL32R") == 0) |
| { |
| if (prefer_const16) |
| a_greater = TRUE; |
| else |
| b_greater = TRUE; |
| } |
| else if (strcmp (l_or_a->option_name, "IsaUseL32R") == 0 |
| && strcmp (l_or_b->option_name, "IsaUseConst16") == 0) |
| { |
| if (prefer_const16) |
| b_greater = TRUE; |
| else |
| a_greater = TRUE; |
| } |
| else |
| return 0; |
| } |
| l_or_a = l_or_a->next; |
| l_or_b = l_or_b->next; |
| } |
| if (l_or_a || l_or_b) |
| return 0; |
| |
| l_a = l_a->next; |
| l_b = l_b->next; |
| } |
| if (l_a || l_b) |
| return 0; |
| |
| /* Incomparable if the substitution was used differently in two cases. */ |
| if (a_greater && b_greater) |
| return 0; |
| |
| if (b_greater) |
| return 1; |
| if (a_greater) |
| return -1; |
| |
| return 0; |
| } |
| |
| |
| static TransitionRule * |
| xg_instruction_match (TInsn *insn) |
| { |
| TransitionTable *table = xg_build_simplify_table (&transition_rule_cmp); |
| TransitionList *l; |
| assert (insn->opcode < table->num_opcodes); |
| |
| /* Walk through all of the possible transitions. */ |
| for (l = table->table[insn->opcode]; l != NULL; l = l->next) |
| { |
| TransitionRule *rule = l->rule; |
| if (xg_instruction_matches_rule (insn, rule)) |
| return rule; |
| } |
| return NULL; |
| } |
| |
| |
| /* Various Other Internal Functions. */ |
| |
| static bfd_boolean |
| is_unique_insn_expansion (TransitionRule *r) |
| { |
| if (!r->to_instr || r->to_instr->next != NULL) |
| return FALSE; |
| if (r->to_instr->typ != INSTR_INSTR) |
| return FALSE; |
| return TRUE; |
| } |
| |
| |
| /* Check if there is exactly one relaxation for INSN that converts it to |
| another instruction of equal or larger size. If so, and if TARG is |
| non-null, go ahead and generate the relaxed instruction into TARG. If |
| NARROW_ONLY is true, then only consider relaxations that widen a narrow |
| instruction, i.e., ignore relaxations that convert to an instruction of |
| equal size. In some contexts where this function is used, only |
| a single widening is allowed and the NARROW_ONLY argument is used to |
| exclude cases like ADDI being "widened" to an ADDMI, which may |
| later be relaxed to an ADDMI/ADDI pair. */ |
| |
| bfd_boolean |
| xg_is_single_relaxable_insn (TInsn *insn, TInsn *targ, bfd_boolean narrow_only) |
| { |
| TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); |
| TransitionList *l; |
| TransitionRule *match = 0; |
| |
| assert (insn->insn_type == ITYPE_INSN); |
| assert (insn->opcode < table->num_opcodes); |
| |
| for (l = table->table[insn->opcode]; l != NULL; l = l->next) |
| { |
| TransitionRule *rule = l->rule; |
| |
| if (xg_instruction_matches_rule (insn, rule) |
| && is_unique_insn_expansion (rule) |
| && (xg_get_single_size (insn->opcode) + (narrow_only ? 1 : 0) |
| <= xg_get_single_size (rule->to_instr->opcode))) |
| { |
| if (match) |
| return FALSE; |
| match = rule; |
| } |
| } |
| if (!match) |
| return FALSE; |
| |
| if (targ) |
| xg_build_to_insn (targ, insn, match->to_instr); |
| return TRUE; |
| } |
| |
| |
| /* Return the maximum number of bytes this opcode can expand to. */ |
| |
| static int |
| xg_get_max_insn_widen_size (xtensa_opcode opcode) |
| { |
| TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); |
| TransitionList *l; |
| int max_size = xg_get_single_size (opcode); |
| |
| assert (opcode < table->num_opcodes); |
| |
| for (l = table->table[opcode]; l != NULL; l = l->next) |
| { |
| TransitionRule *rule = l->rule; |
| BuildInstr *build_list; |
| int this_size = 0; |
| |
| if (!rule) |
| continue; |
| build_list = rule->to_instr; |
| if (is_unique_insn_expansion (rule)) |
| { |
| assert (build_list->typ == INSTR_INSTR); |
| this_size = xg_get_max_insn_widen_size (build_list->opcode); |
| } |
| else |
| for (; build_list != NULL; build_list = build_list->next) |
| { |
| switch (build_list->typ) |
| { |
| case INSTR_INSTR: |
| this_size += xg_get_single_size (build_list->opcode); |
| break; |
| case INSTR_LITERAL_DEF: |
| case INSTR_LABEL_DEF: |
| default: |
| break; |
| } |
| } |
| if (this_size > max_size) |
| max_size = this_size; |
| } |
| return max_size; |
| } |
| |
| |
| /* Return the maximum number of literal bytes this opcode can generate. */ |
| |
| static int |
| xg_get_max_insn_widen_literal_size (xtensa_opcode opcode) |
| { |
| TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); |
| TransitionList *l; |
| int max_size = 0; |
| |
| assert (opcode < table->num_opcodes); |
| |
| for (l = table->table[opcode]; l != NULL; l = l->next) |
| { |
| TransitionRule *rule = l->rule; |
| BuildInstr *build_list; |
| int this_size = 0; |
| |
| if (!rule) |
| continue; |
| build_list = rule->to_instr; |
| if (is_unique_insn_expansion (rule)) |
| { |
| assert (build_list->typ == INSTR_INSTR); |
| this_size = xg_get_max_insn_widen_literal_size (build_list->opcode); |
| } |
| else |
| for (; build_list != NULL; build_list = build_list->next) |
| { |
| switch (build_list->typ) |
| { |
| case INSTR_LITERAL_DEF: |
| /* Hard-coded 4-byte literal. */ |
| this_size += 4; |
| break; |
| case INSTR_INSTR: |
| case INSTR_LABEL_DEF: |
| default: |
| break; |
| } |
| } |
| if (this_size > max_size) |
| max_size = this_size; |
| } |
| return max_size; |
| } |
| |
| |
| static bfd_boolean |
| xg_is_relaxable_insn (TInsn *insn, int lateral_steps) |
| { |
| int steps_taken = 0; |
| TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); |
| TransitionList *l; |
| |
| assert (insn->insn_type == ITYPE_INSN); |
| assert (insn->opcode < table->num_opcodes); |
| |
| for (l = table->table[insn->opcode]; l != NULL; l = l->next) |
| { |
| TransitionRule *rule = l->rule; |
| |
| if (xg_instruction_matches_rule (insn, rule)) |
| { |
| if (steps_taken == lateral_steps) |
| return TRUE; |
| steps_taken++; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| static symbolS * |
| get_special_literal_symbol (void) |
| { |
| static symbolS *sym = NULL; |
| |
| if (sym == NULL) |
| sym = symbol_find_or_make ("SPECIAL_LITERAL0\001"); |
| return sym; |
| } |
| |
| |
| static symbolS * |
| get_special_label_symbol (void) |
| { |
| static symbolS *sym = NULL; |
| |
| if (sym == NULL) |
| sym = symbol_find_or_make ("SPECIAL_LABEL0\001"); |
| return sym; |
| } |
| |
| |
| static bfd_boolean |
| xg_valid_literal_expression (const expressionS *exp) |
| { |
| switch (exp->X_op) |
| { |
| case O_constant: |
| case O_symbol: |
| case O_big: |
| case O_uminus: |
| case O_subtract: |
| case O_pltrel: |
| return TRUE; |
| default: |
| return FALSE; |
| } |
| } |
| |
| |
| /* This will check to see if the value can be converted into the |
| operand type. It will return TRUE if it does not fit. */ |
| |
| static bfd_boolean |
| xg_check_operand (int32 value, xtensa_opcode opcode, int operand) |
| { |
| uint32 valbuf = value; |
| if (xtensa_operand_encode (xtensa_default_isa, opcode, operand, &valbuf)) |
| return TRUE; |
| return FALSE; |
| } |
| |
| |
| /* Assumes: All immeds are constants. Check that all constants fit |
| into their immeds; return FALSE if not. */ |
| |
| static bfd_boolean |
| xg_immeds_fit (const TInsn *insn) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int i; |
| |
| int n = insn->ntok; |
| assert (insn->insn_type == ITYPE_INSN); |
| for (i = 0; i < n; ++i) |
| { |
| const expressionS *expr = &insn->tok[i]; |
| if (xtensa_operand_is_register (isa, insn->opcode, i) == 1) |
| continue; |
| |
| switch (expr->X_op) |
| { |
| case O_register: |
| case O_constant: |
| if (xg_check_operand (expr->X_add_number, insn->opcode, i)) |
| return FALSE; |
| break; |
| |
| default: |
| /* The symbol should have a fixup associated with it. */ |
| assert (FALSE); |
| break; |
| } |
| } |
| return TRUE; |
| } |
| |
| |
| /* This should only be called after we have an initial |
| estimate of the addresses. */ |
| |
| static bfd_boolean |
| xg_symbolic_immeds_fit (const TInsn *insn, |
| segT pc_seg, |
| fragS *pc_frag, |
| offsetT pc_offset, |
| long stretch) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| symbolS *symbolP; |
| fragS *sym_frag; |
| offsetT target, pc; |
| uint32 new_offset; |
| int i; |
| int n = insn->ntok; |
| |
| assert (insn->insn_type == ITYPE_INSN); |
| |
| for (i = 0; i < n; ++i) |
| { |
| const expressionS *expr = &insn->tok[i]; |
| if (xtensa_operand_is_register (isa, insn->opcode, i) == 1) |
| continue; |
| |
| switch (expr->X_op) |
| { |
| case O_register: |
| case O_constant: |
| if (xg_check_operand (expr->X_add_number, insn->opcode, i)) |
| return FALSE; |
| break; |
| |
| case O_lo16: |
| case O_hi16: |
| /* Check for the worst case. */ |
| if (xg_check_operand (0xffff, insn->opcode, i)) |
| return FALSE; |
| break; |
| |
| case O_symbol: |
| /* We only allow symbols for PC-relative references. |
| If pc_frag == 0, then we don't have frag locations yet. */ |
| if (pc_frag == 0 |
| || xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0) |
| return FALSE; |
| |
| /* If it is a weak symbol, then assume it won't reach. */ |
| if (S_IS_WEAK (expr->X_add_symbol)) |
| return FALSE; |
| |
| if (is_direct_call_opcode (insn->opcode) |
| && ! pc_frag->tc_frag_data.use_longcalls) |
| { |
| /* If callee is undefined or in a different segment, be |
| optimistic and assume it will be in range. */ |
| if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) |
| return TRUE; |
| } |
| |
| /* Only references within a segment can be known to fit in the |
| operands at assembly time. */ |
| if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) |
| return FALSE; |
| |
| symbolP = expr->X_add_symbol; |
| sym_frag = symbol_get_frag (symbolP); |
| target = S_GET_VALUE (symbolP) + expr->X_add_number; |
| pc = pc_frag->fr_address + pc_offset; |
| |
| /* If frag has yet to be reached on this pass, assume it |
| will move by STRETCH just as we did. If this is not so, |
| it will be because some frag between grows, and that will |
| force another pass. Beware zero-length frags. There |
| should be a faster way to do this. */ |
| |
| if (stretch != 0 |
| && sym_frag->relax_marker != pc_frag->relax_marker |
| && S_GET_SEGMENT (symbolP) == pc_seg) |
| { |
| target += stretch; |
| } |
| |
| new_offset = target; |
| xtensa_operand_do_reloc (isa, insn->opcode, i, &new_offset, pc); |
| if (xg_check_operand (new_offset, insn->opcode, i)) |
| return FALSE; |
| break; |
| |
| default: |
| /* The symbol should have a fixup associated with it. */ |
| return FALSE; |
| } |
| } |
| |
| return TRUE; |
| } |
| |
| |
| /* Return TRUE on success. */ |
| |
| static bfd_boolean |
| xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) |
| { |
| BuildOp *op; |
| symbolS *sym; |
| |
| memset (targ, 0, sizeof (TInsn)); |
| targ->linenum = insn->linenum; |
| switch (bi->typ) |
| { |
| case INSTR_INSTR: |
| op = bi->ops; |
| targ->opcode = bi->opcode; |
| targ->insn_type = ITYPE_INSN; |
| targ->is_specific_opcode = FALSE; |
| |
| for (; op != NULL; op = op->next) |
| { |
| int op_num = op->op_num; |
| int op_data = op->op_data; |
| |
| assert (op->op_num < MAX_INSN_ARGS); |
| |
| if (targ->ntok <= op_num) |
| targ->ntok = op_num + 1; |
| |
| switch (op->typ) |
| { |
| case OP_CONSTANT: |
| set_expr_const (&targ->tok[op_num], op_data); |
| break; |
| case OP_OPERAND: |
| assert (op_data < insn->ntok); |
| copy_expr (&targ->tok[op_num], &insn->tok[op_data]); |
| break; |
| case OP_LITERAL: |
| sym = get_special_literal_symbol (); |
| set_expr_symbol_offset (&targ->tok[op_num], sym, 0); |
| break; |
| case OP_LABEL: |
| sym = get_special_label_symbol (); |
| set_expr_symbol_offset (&targ->tok[op_num], sym, 0); |
| break; |
| case OP_OPERAND_HI16U: |
| case OP_OPERAND_LOW16U: |
| assert (op_data < insn->ntok); |
| if (expr_is_const (&insn->tok[op_data])) |
| { |
| long val; |
| copy_expr (&targ->tok[op_num], &insn->tok[op_data]); |
| val = xg_apply_userdef_op_fn (op->typ, |
| targ->tok[op_num]. |
| X_add_number); |
| targ->tok[op_num].X_add_number = val; |
| } |
| else |
| { |
| /* For const16 we can create relocations for these. */ |
| if (targ->opcode == XTENSA_UNDEFINED |
| || (targ->opcode != xtensa_const16_opcode)) |
| return FALSE; |
| assert (op_data < insn->ntok); |
| /* Need to build a O_lo16 or O_hi16. */ |
| copy_expr (&targ->tok[op_num], &insn->tok[op_data]); |
| if (targ->tok[op_num].X_op == O_symbol) |
| { |
| if (op->typ == OP_OPERAND_HI16U) |
| targ->tok[op_num].X_op = O_hi16; |
| else if (op->typ == OP_OPERAND_LOW16U) |
| targ->tok[op_num].X_op = O_lo16; |
| else |
| return FALSE; |
| } |
| } |
| break; |
| default: |
| /* currently handles: |
| OP_OPERAND_LOW8 |
| OP_OPERAND_HI24S |
| OP_OPERAND_F32MINUS */ |
| if (xg_has_userdef_op_fn (op->typ)) |
| { |
| assert (op_data < insn->ntok); |
| if (expr_is_const (&insn->tok[op_data])) |
| { |
| long val; |
| copy_expr (&targ->tok[op_num], &insn->tok[op_data]); |
| val = xg_apply_userdef_op_fn (op->typ, |
| targ->tok[op_num]. |
| X_add_number); |
| targ->tok[op_num].X_add_number = val; |
| } |
| else |
| return FALSE; /* We cannot use a relocation for this. */ |
| break; |
| } |
| assert (0); |
| break; |
| } |
| } |
| break; |
| |
| case INSTR_LITERAL_DEF: |
| op = bi->ops; |
| targ->opcode = XTENSA_UNDEFINED; |
| targ->insn_type = ITYPE_LITERAL; |
| targ->is_specific_opcode = FALSE; |
| for (; op != NULL; op = op->next) |
| { |
| int op_num = op->op_num; |
| int op_data = op->op_data; |
| assert (op->op_num < MAX_INSN_ARGS); |
| |
| if (targ->ntok <= op_num) |
| targ->ntok = op_num + 1; |
| |
| switch (op->typ) |
| { |
| case OP_OPERAND: |
| assert (op_data < insn->ntok); |
| /* We can only pass resolvable literals through. */ |
| if (!xg_valid_literal_expression (&insn->tok[op_data])) |
| return FALSE; |
| copy_expr (&targ->tok[op_num], &insn->tok[op_data]); |
| break; |
| case OP_LITERAL: |
| case OP_CONSTANT: |
| case OP_LABEL: |
| default: |
| assert (0); |
| break; |
| } |
| } |
| break; |
| |
| case INSTR_LABEL_DEF: |
| op = bi->ops; |
| targ->opcode = XTENSA_UNDEFINED; |
| targ->insn_type = ITYPE_LABEL; |
| targ->is_specific_opcode = FALSE; |
| /* Literal with no ops is a label? */ |
| assert (op == NULL); |
| break; |
| |
| default: |
| assert (0); |
| } |
| |
| return TRUE; |
| } |
| |
| |
| /* Return TRUE on success. */ |
| |
| static bfd_boolean |
| xg_build_to_stack (IStack *istack, TInsn *insn, BuildInstr *bi) |
| { |
| for (; bi != NULL; bi = bi->next) |
| { |
| TInsn *next_insn = istack_push_space (istack); |
| |
| if (!xg_build_to_insn (next_insn, insn, bi)) |
| return FALSE; |
| } |
| return TRUE; |
| } |
| |
| |
| /* Return TRUE on valid expansion. */ |
| |
| static bfd_boolean |
| xg_expand_to_stack (IStack *istack, TInsn *insn, int lateral_steps) |
| { |
| int stack_size = istack->ninsn; |
| int steps_taken = 0; |
| TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); |
| TransitionList *l; |
| |
| assert (insn->insn_type == ITYPE_INSN); |
| assert (insn->opcode < table->num_opcodes); |
| |
| for (l = table->table[insn->opcode]; l != NULL; l = l->next) |
| { |
| TransitionRule *rule = l->rule; |
| |
| if (xg_instruction_matches_rule (insn, rule)) |
| { |
| if (lateral_steps == steps_taken) |
| { |
| int i; |
| |
| /* This is it. Expand the rule to the stack. */ |
| if (!xg_build_to_stack (istack, insn, rule->to_instr)) |
| return FALSE; |
| |
| /* Check to see if it fits. */ |
| for (i = stack_size; i < istack->ninsn; i++) |
| { |
| TInsn *insn = &istack->insn[i]; |
| |
| if (insn->insn_type == ITYPE_INSN |
| && !tinsn_has_symbolic_operands (insn) |
| && !xg_immeds_fit (insn)) |
| { |
| istack->ninsn = stack_size; |
| return FALSE; |
| } |
| } |
| return TRUE; |
| } |
| steps_taken++; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| /* Relax the assembly instruction at least "min_steps". |
| Return the number of steps taken. */ |
| |
| static int |
| xg_assembly_relax (IStack *istack, |
| TInsn *insn, |
| segT pc_seg, |
| fragS *pc_frag, /* if pc_frag == 0, not pc-relative */ |
| offsetT pc_offset, /* offset in fragment */ |
| int min_steps, /* minimum conversion steps */ |
| long stretch) /* number of bytes stretched so far */ |
| { |
| int steps_taken = 0; |
| |
| /* assert (has no symbolic operands) |
| Some of its immeds don't fit. |
| Try to build a relaxed version. |
| This may go through a couple of stages |
| of single instruction transformations before |
| we get there. */ |
| |
| TInsn single_target; |
| TInsn current_insn; |
| int lateral_steps = 0; |
| int istack_size = istack->ninsn; |
| |
| if (xg_symbolic_immeds_fit (insn, pc_seg, pc_frag, pc_offset, stretch) |
| && steps_taken >= min_steps) |
| { |
| istack_push (istack, insn); |
| return steps_taken; |
| } |
| current_insn = *insn; |
| |
| /* Walk through all of the single instruction expansions. */ |
| while (xg_is_single_relaxable_insn (¤t_insn, &single_target, FALSE)) |
| { |
| steps_taken++; |
| if (xg_symbolic_immeds_fit (&single_target, pc_seg, pc_frag, pc_offset, |
| stretch)) |
| { |
| if (steps_taken >= min_steps) |
| { |
| istack_push (istack, &single_target); |
| return steps_taken; |
| } |
| } |
| current_insn = single_target; |
| } |
| |
| /* Now check for a multi-instruction expansion. */ |
| while (xg_is_relaxable_insn (¤t_insn, lateral_steps)) |
| { |
| if (xg_symbolic_immeds_fit (¤t_insn, pc_seg, pc_frag, pc_offset, |
| stretch)) |
| { |
| if (steps_taken >= min_steps) |
| { |
| istack_push (istack, ¤t_insn); |
| return steps_taken; |
| } |
| } |
| steps_taken++; |
| if (xg_expand_to_stack (istack, ¤t_insn, lateral_steps)) |
| { |
| if (steps_taken >= min_steps) |
| return steps_taken; |
| } |
| lateral_steps++; |
| istack->ninsn = istack_size; |
| } |
| |
| /* It's not going to work -- use the original. */ |
| istack_push (istack, insn); |
| return steps_taken; |
| } |
| |
| |
| static void |
| xg_force_frag_space (int size) |
| { |
| /* This may have the side effect of creating a new fragment for the |
| space to go into. I just do not like the name of the "frag" |
| functions. */ |
| frag_grow (size); |
| } |
| |
| |
| static void |
| xg_finish_frag (char *last_insn, |
| enum xtensa_relax_statesE frag_state, |
| enum xtensa_relax_statesE slot0_state, |
| int max_growth, |
| bfd_boolean is_insn) |
| { |
| /* Finish off this fragment so that it has at LEAST the desired |
| max_growth. If it doesn't fit in this fragment, close this one |
| and start a new one. In either case, return a pointer to the |
| beginning of the growth area. */ |
| |
| fragS *old_frag; |
| |
| xg_force_frag_space (max_growth); |
| |
| old_frag = frag_now; |
| |
| frag_now->fr_opcode = last_insn; |
| if (is_insn) |
| frag_now->tc_frag_data.is_insn = TRUE; |
| |
| frag_var (rs_machine_dependent, max_growth, max_growth, |
| frag_state, frag_now->fr_symbol, frag_now->fr_offset, last_insn); |
| |
| old_frag->tc_frag_data.slot_subtypes[0] = slot0_state; |
| xtensa_set_frag_assembly_state (frag_now); |
| |
| /* Just to make sure that we did not split it up. */ |
| assert (old_frag->fr_next == frag_now); |
| } |
| |
| |
| /* Return TRUE if the target frag is one of the next non-empty frags. */ |
| |
| static bfd_boolean |
| is_next_frag_target (const fragS *fragP, const fragS *target) |
| { |
| if (fragP == NULL) |
| return FALSE; |
| |
| for (; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP == target) |
| return TRUE; |
| if (fragP->fr_fix != 0) |
| return FALSE; |
| if (fragP->fr_type == rs_fill && fragP->fr_offset != 0) |
| return FALSE; |
| if ((fragP->fr_type == rs_align || fragP->fr_type == rs_align_code) |
| && ((fragP->fr_address % (1 << fragP->fr_offset)) != 0)) |
| return FALSE; |
| if (fragP->fr_type == rs_space) |
| return FALSE; |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| is_branch_jmp_to_next (TInsn *insn, fragS *fragP) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int i; |
| int num_ops = xtensa_opcode_num_operands (isa, insn->opcode); |
| int target_op = -1; |
| symbolS *sym; |
| fragS *target_frag; |
| |
| if (xtensa_opcode_is_branch (isa, insn->opcode) == 0 |
| && xtensa_opcode_is_jump (isa, insn->opcode) == 0) |
| return FALSE; |
| |
| for (i = 0; i < num_ops; i++) |
| { |
| if (xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 1) |
| { |
| target_op = i; |
| break; |
| } |
| } |
| if (target_op == -1) |
| return FALSE; |
| |
| if (insn->ntok <= target_op) |
| return FALSE; |
| |
| if (insn->tok[target_op].X_op != O_symbol) |
| return FALSE; |
| |
| sym = insn->tok[target_op].X_add_symbol; |
| if (sym == NULL) |
| return FALSE; |
| |
| if (insn->tok[target_op].X_add_number != 0) |
| return FALSE; |
| |
| target_frag = symbol_get_frag (sym); |
| if (target_frag == NULL) |
| return FALSE; |
| |
| if (is_next_frag_target (fragP->fr_next, target_frag) |
| && S_GET_VALUE (sym) == target_frag->fr_address) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| |
| static void |
| xg_add_branch_and_loop_targets (TInsn *insn) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int num_ops = xtensa_opcode_num_operands (isa, insn->opcode); |
| |
| if (xtensa_opcode_is_loop (isa, insn->opcode) == 1) |
| { |
| int i = 1; |
| if (xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 1 |
| && insn->tok[i].X_op == O_symbol) |
| symbol_get_tc (insn->tok[i].X_add_symbol)->is_loop_target = TRUE; |
| return; |
| } |
| |
| if (xtensa_opcode_is_branch (isa, insn->opcode) == 1 |
| || xtensa_opcode_is_loop (isa, insn->opcode) == 1) |
| { |
| int i; |
| |
| for (i = 0; i < insn->ntok && i < num_ops; i++) |
| { |
| if (xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 1 |
| && insn->tok[i].X_op == O_symbol) |
| { |
| symbolS *sym = insn->tok[i].X_add_symbol; |
| symbol_get_tc (sym)->is_branch_target = TRUE; |
| if (S_IS_DEFINED (sym)) |
| symbol_get_frag (sym)->tc_frag_data.is_branch_target = TRUE; |
| } |
| } |
| } |
| } |
| |
| |
| /* Return FALSE if no error. */ |
| |
| static bfd_boolean |
| xg_build_token_insn (BuildInstr *instr_spec, TInsn *old_insn, TInsn *new_insn) |
| { |
| int num_ops = 0; |
| BuildOp *b_op; |
| |
| switch (instr_spec->typ) |
| { |
| case INSTR_INSTR: |
| new_insn->insn_type = ITYPE_INSN; |
| new_insn->opcode = instr_spec->opcode; |
| new_insn->is_specific_opcode = FALSE; |
| new_insn->linenum = old_insn->linenum; |
| break; |
| case INSTR_LITERAL_DEF: |
| new_insn->insn_type = ITYPE_LITERAL; |
| new_insn->opcode = XTENSA_UNDEFINED; |
| new_insn->is_specific_opcode = FALSE; |
| new_insn->linenum = old_insn->linenum; |
| break; |
| case INSTR_LABEL_DEF: |
| as_bad (_("INSTR_LABEL_DEF not supported yet")); |
| break; |
| } |
| |
| for (b_op = instr_spec->ops; b_op != NULL; b_op = b_op->next) |
| { |
| expressionS *exp; |
| const expressionS *src_exp; |
| |
| num_ops++; |
| switch (b_op->typ) |
| { |
| case OP_CONSTANT: |
| /* The expression must be the constant. */ |
| assert (b_op->op_num < MAX_INSN_ARGS); |
| exp = &new_insn->tok[b_op->op_num]; |
| set_expr_const (exp, b_op->op_data); |
| break; |
| |
| case OP_OPERAND: |
| assert (b_op->op_num < MAX_INSN_ARGS); |
| assert (b_op->op_data < (unsigned) old_insn->ntok); |
| src_exp = &old_insn->tok[b_op->op_data]; |
| exp = &new_insn->tok[b_op->op_num]; |
| copy_expr (exp, src_exp); |
| break; |
| |
| case OP_LITERAL: |
| case OP_LABEL: |
| as_bad (_("can't handle generation of literal/labels yet")); |
| assert (0); |
| |
| default: |
| as_bad (_("can't handle undefined OP TYPE")); |
| assert (0); |
| } |
| } |
| |
| new_insn->ntok = num_ops; |
| return FALSE; |
| } |
| |
| |
| /* Return TRUE if it was simplified. */ |
| |
| static bfd_boolean |
| xg_simplify_insn (TInsn *old_insn, TInsn *new_insn) |
| { |
| TransitionRule *rule; |
| BuildInstr *insn_spec; |
| |
| if (old_insn->is_specific_opcode || !density_supported) |
| return FALSE; |
| |
| rule = xg_instruction_match (old_insn); |
| if (rule == NULL) |
| return FALSE; |
| |
| insn_spec = rule->to_instr; |
| /* There should only be one. */ |
| assert (insn_spec != NULL); |
| assert (insn_spec->next == NULL); |
| if (insn_spec->next != NULL) |
| return FALSE; |
| |
| xg_build_token_insn (insn_spec, old_insn, new_insn); |
| |
| return TRUE; |
| } |
| |
| |
| /* xg_expand_assembly_insn: (1) Simplify the instruction, i.e., l32i -> |
| l32i.n. (2) Check the number of operands. (3) Place the instruction |
| tokens into the stack or relax it and place multiple |
| instructions/literals onto the stack. Return FALSE if no error. */ |
| |
| static bfd_boolean |
| xg_expand_assembly_insn (IStack *istack, TInsn *orig_insn) |
| { |
| int noperands; |
| TInsn new_insn; |
| bfd_boolean do_expand; |
| |
| memset (&new_insn, 0, sizeof (TInsn)); |
| |
| /* Narrow it if we can. xg_simplify_insn now does all the |
| appropriate checking (e.g., for the density option). */ |
| if (xg_simplify_insn (orig_insn, &new_insn)) |
| orig_insn = &new_insn; |
| |
| noperands = xtensa_opcode_num_operands (xtensa_default_isa, |
| orig_insn->opcode); |
| if (orig_insn->ntok < noperands) |
| { |
| as_bad (_("found %d operands for '%s': Expected %d"), |
| orig_insn->ntok, |
| xtensa_opcode_name (xtensa_default_isa, orig_insn->opcode), |
| noperands); |
| return TRUE; |
| } |
| if (orig_insn->ntok > noperands) |
| as_warn (_("found too many (%d) operands for '%s': Expected %d"), |
| orig_insn->ntok, |
| xtensa_opcode_name (xtensa_default_isa, orig_insn->opcode), |
| noperands); |
| |
| /* If there are not enough operands, we will assert above. If there |
| are too many, just cut out the extras here. */ |
| orig_insn->ntok = noperands; |
| |
| if (tinsn_has_invalid_symbolic_operands (orig_insn)) |
| return TRUE; |
| |
| /* If the instruction will definitely need to be relaxed, it is better |
| to expand it now for better scheduling. Decide whether to expand |
| now.... */ |
| do_expand = (!orig_insn->is_specific_opcode && use_transform ()); |
| |
| /* Calls should be expanded to longcalls only in the backend relaxation |
| so that the assembly scheduler will keep the L32R/CALLX instructions |
| adjacent. */ |
| if (is_direct_call_opcode (orig_insn->opcode)) |
| do_expand = FALSE; |
| |
| if (tinsn_has_symbolic_operands (orig_insn)) |
| { |
| /* The values of symbolic operands are not known yet, so only expand |
| now if an operand is "complex" (e.g., difference of symbols) and |
| will have to be stored as a literal regardless of the value. */ |
| if (!tinsn_has_complex_operands (orig_insn)) |
| do_expand = FALSE; |
| } |
| else if (xg_immeds_fit (orig_insn)) |
| do_expand = FALSE; |
| |
| if (do_expand) |
| xg_assembly_relax (istack, orig_insn, 0, 0, 0, 0, 0); |
| else |
| istack_push (istack, orig_insn); |
| |
| return FALSE; |
| } |
| |
| |
| /* Return TRUE if the section flags are marked linkonce |
| or the name is .gnu.linkonce*. */ |
| |
| static bfd_boolean |
| get_is_linkonce_section (bfd *abfd ATTRIBUTE_UNUSED, segT sec) |
| { |
| flagword flags, link_once_flags; |
| |
| flags = bfd_get_section_flags (abfd, sec); |
| link_once_flags = (flags & SEC_LINK_ONCE); |
| |
| /* Flags might not be set yet. */ |
| if (!link_once_flags) |
| { |
| static size_t len = sizeof ".gnu.linkonce.t."; |
| |
| if (strncmp (segment_name (sec), ".gnu.linkonce.t.", len - 1) == 0) |
| link_once_flags = SEC_LINK_ONCE; |
| } |
| return (link_once_flags != 0); |
| } |
| |
| |
| static void |
| xtensa_add_literal_sym (symbolS *sym) |
| { |
| sym_list *l; |
| |
| l = (sym_list *) xmalloc (sizeof (sym_list)); |
| l->sym = sym; |
| l->next = literal_syms; |
| literal_syms = l; |
| } |
| |
| |
| static symbolS * |
| xtensa_create_literal_symbol (segT sec, fragS *frag) |
| { |
| static int lit_num = 0; |
| static char name[256]; |
| symbolS *symbolP; |
| |
| sprintf (name, ".L_lit_sym%d", lit_num); |
| |
| /* Create a local symbol. If it is in a linkonce section, we have to |
| be careful to make sure that if it is used in a relocation that the |
| symbol will be in the output file. */ |
| if (get_is_linkonce_section (stdoutput, sec)) |
| { |
| symbolP = symbol_new (name, sec, 0, frag); |
| S_CLEAR_EXTERNAL (symbolP); |
| /* symbolP->local = 1; */ |
| } |
| else |
| symbolP = symbol_new (name, sec, 0, frag); |
| |
| xtensa_add_literal_sym (symbolP); |
| |
| lit_num++; |
| return symbolP; |
| } |
| |
| |
| /* Currently all literals that are generated here are 32-bit L32R targets. */ |
| |
| static symbolS * |
| xg_assemble_literal (/* const */ TInsn *insn) |
| { |
| emit_state state; |
| symbolS *lit_sym = NULL; |
| |
| /* size = 4 for L32R. It could easily be larger when we move to |
| larger constants. Add a parameter later. */ |
| offsetT litsize = 4; |
| offsetT litalign = 2; /* 2^2 = 4 */ |
| expressionS saved_loc; |
| expressionS * emit_val; |
| |
| set_expr_symbol_offset (&saved_loc, frag_now->fr_symbol, frag_now_fix ()); |
| |
| assert (insn->insn_type == ITYPE_LITERAL); |
| assert (insn->ntok == 1); /* must be only one token here */ |
| |
| xtensa_switch_to_literal_fragment (&state); |
| |
| emit_val = &insn->tok[0]; |
| if (emit_val->X_op == O_big) |
| { |
| int size = emit_val->X_add_number * CHARS_PER_LITTLENUM; |
| if (size > litsize) |
| { |
| /* This happens when someone writes a "movi a2, big_number". */ |
| as_bad_where (frag_now->fr_file, frag_now->fr_line, |
| _("invalid immediate")); |
| xtensa_restore_emit_state (&state); |
| return NULL; |
| } |
| } |
| |
| /* Force a 4-byte align here. Note that this opens a new frag, so all |
| literals done with this function have a frag to themselves. That's |
| important for the way text section literals work. */ |
| frag_align (litalign, 0, 0); |
| record_alignment (now_seg, litalign); |
| |
| if (emit_val->X_op == O_pltrel) |
| { |
| char *p = frag_more (litsize); |
| xtensa_set_frag_assembly_state (frag_now); |
| if (emit_val->X_add_symbol) |
| emit_val->X_op = O_symbol; |
| else |
| emit_val->X_op = O_constant; |
| fix_new_exp (frag_now, p - frag_now->fr_literal, |
| litsize, emit_val, 0, BFD_RELOC_XTENSA_PLT); |
| } |
| else |
| emit_expr (emit_val, litsize); |
| |
| assert (frag_now->tc_frag_data.literal_frag == NULL); |
| frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg); |
| frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now); |
| lit_sym = frag_now->fr_symbol; |
| |
| /* Go back. */ |
| xtensa_restore_emit_state (&state); |
| return lit_sym; |
| } |
| |
| |
| static void |
| xg_assemble_literal_space (/* const */ int size, int slot) |
| { |
| emit_state state; |
| /* We might have to do something about this alignment. It only |
| takes effect if something is placed here. */ |
| offsetT litalign = 2; /* 2^2 = 4 */ |
| fragS *lit_saved_frag; |
| |
| assert (size % 4 == 0); |
| |
| xtensa_switch_to_literal_fragment (&state); |
| |
| /* Force a 4-byte align here. */ |
| frag_align (litalign, 0, 0); |
| record_alignment (now_seg, litalign); |
| |
| xg_force_frag_space (size); |
| |
| lit_saved_frag = frag_now; |
| frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg); |
| frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now); |
| xg_finish_frag (0, RELAX_LITERAL, 0, size, FALSE); |
| |
| /* Go back. */ |
| xtensa_restore_emit_state (&state); |
| frag_now->tc_frag_data.literal_frags[slot] = lit_saved_frag; |
| } |
| |
| |
| /* Put in a fixup record based on the opcode. |
| Return TRUE on success. */ |
| |
| static bfd_boolean |
| xg_add_opcode_fix (TInsn *tinsn, |
| int opnum, |
| xtensa_format fmt, |
| int slot, |
| expressionS *expr, |
| fragS *fragP, |
| offsetT offset) |
| { |
| xtensa_opcode opcode = tinsn->opcode; |
| bfd_reloc_code_real_type reloc; |
| reloc_howto_type *howto; |
| int fmt_length; |
| fixS *the_fix; |
| |
| reloc = BFD_RELOC_NONE; |
| |
| /* First try the special cases for "alternate" relocs. */ |
| if (opcode == xtensa_l32r_opcode) |
| { |
| if (fragP->tc_frag_data.use_absolute_literals) |
| reloc = encode_alt_reloc (slot); |
| } |
| else if (opcode == xtensa_const16_opcode) |
| { |
| if (expr->X_op == O_lo16) |
| { |
| reloc = encode_reloc (slot); |
| expr->X_op = O_symbol; |
| } |
| else if (expr->X_op == O_hi16) |
| { |
| reloc = encode_alt_reloc (slot); |
| expr->X_op = O_symbol; |
| } |
| } |
| |
| if (opnum != get_relaxable_immed (opcode)) |
| { |
| as_bad (_("invalid relocation for operand %i of '%s'"), |
| opnum + 1, xtensa_opcode_name (xtensa_default_isa, opcode)); |
| return FALSE; |
| } |
| |
| /* Handle erroneous "@h" and "@l" expressions here before they propagate |
| into the symbol table where the generic portions of the assembler |
| won't know what to do with them. */ |
| if (expr->X_op == O_lo16 || expr->X_op == O_hi16) |
| { |
| as_bad (_("invalid expression for operand %i of '%s'"), |
| opnum + 1, xtensa_opcode_name (xtensa_default_isa, opcode)); |
| return FALSE; |
| } |
| |
| /* Next try the generic relocs. */ |
| if (reloc == BFD_RELOC_NONE) |
| reloc = encode_reloc (slot); |
| if (reloc == BFD_RELOC_NONE) |
| { |
| as_bad (_("invalid relocation in instruction slot %i"), slot); |
| return FALSE; |
| } |
| |
| howto = bfd_reloc_type_lookup (stdoutput, reloc); |
| if (!howto) |
| { |
| as_bad (_("undefined symbol for opcode \"%s\""), |
| xtensa_opcode_name (xtensa_default_isa, opcode)); |
| return FALSE; |
| } |
| |
| fmt_length = xtensa_format_length (xtensa_default_isa, fmt); |
| the_fix = fix_new_exp (fragP, offset, fmt_length, expr, |
| howto->pc_relative, reloc); |
| the_fix->fx_no_overflow = 1; |
| |
| if (expr->X_add_symbol |
| && (S_IS_EXTERNAL (expr->X_add_symbol) |
| || S_IS_WEAK (expr->X_add_symbol))) |
| the_fix->fx_plt = TRUE; |
| |
| the_fix->tc_fix_data.X_add_symbol = expr->X_add_symbol; |
| the_fix->tc_fix_data.X_add_number = expr->X_add_number; |
| the_fix->tc_fix_data.slot = slot; |
| |
| return TRUE; |
| } |
| |
| |
| static bfd_boolean |
| xg_emit_insn_to_buf (TInsn *tinsn, |
| char *buf, |
| fragS *fragP, |
| offsetT offset, |
| bfd_boolean build_fix) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| bfd_boolean has_symbolic_immed = FALSE; |
| bfd_boolean ok = TRUE; |
| |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (xtensa_default_isa); |
| |
| has_symbolic_immed = tinsn_to_insnbuf (tinsn, insnbuf); |
| if (has_symbolic_immed && build_fix) |
| { |
| /* Add a fixup. */ |
| xtensa_format fmt = xg_get_single_format (tinsn->opcode); |
| int slot = xg_get_single_slot (tinsn->opcode); |
| int opnum = get_relaxable_immed (tinsn->opcode); |
| expressionS *exp = &tinsn->tok[opnum]; |
| |
| if (!xg_add_opcode_fix (tinsn, opnum, fmt, slot, exp, fragP, offset)) |
| ok = FALSE; |
| } |
| fragP->tc_frag_data.is_insn = TRUE; |
| xtensa_insnbuf_to_chars (xtensa_default_isa, insnbuf, |
| (unsigned char *) buf, 0); |
| return ok; |
| } |
| |
| |
| static void |
| xg_resolve_literals (TInsn *insn, symbolS *lit_sym) |
| { |
| symbolS *sym = get_special_literal_symbol (); |
| int i; |
| if (lit_sym == 0) |
| return; |
| assert (insn->insn_type == ITYPE_INSN); |
| for (i = 0; i < insn->ntok; i++) |
| if (insn->tok[i].X_add_symbol == sym) |
| insn->tok[i].X_add_symbol = lit_sym; |
| |
| } |
| |
| |
| static void |
| xg_resolve_labels (TInsn *insn, symbolS *label_sym) |
| { |
| symbolS *sym = get_special_label_symbol (); |
| int i; |
| for (i = 0; i < insn->ntok; i++) |
| if (insn->tok[i].X_add_symbol == sym) |
| insn->tok[i].X_add_symbol = label_sym; |
| |
| } |
| |
| |
| /* Return TRUE if the instruction can write to the specified |
| integer register. */ |
| |
| static bfd_boolean |
| is_register_writer (const TInsn *insn, const char *regset, int regnum) |
| { |
| int i; |
| int num_ops; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| num_ops = xtensa_opcode_num_operands (isa, insn->opcode); |
| |
| for (i = 0; i < num_ops; i++) |
| { |
| char inout; |
| inout = xtensa_operand_inout (isa, insn->opcode, i); |
| if ((inout == 'o' || inout == 'm') |
| && xtensa_operand_is_register (isa, insn->opcode, i) == 1) |
| { |
| xtensa_regfile opnd_rf = |
| xtensa_operand_regfile (isa, insn->opcode, i); |
| if (!strcmp (xtensa_regfile_shortname (isa, opnd_rf), regset)) |
| { |
| if ((insn->tok[i].X_op == O_register) |
| && (insn->tok[i].X_add_number == regnum)) |
| return TRUE; |
| } |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| is_bad_loopend_opcode (const TInsn *tinsn) |
| { |
| xtensa_opcode opcode = tinsn->opcode; |
| |
| if (opcode == XTENSA_UNDEFINED) |
| return FALSE; |
| |
| if (opcode == xtensa_call0_opcode |
| || opcode == xtensa_callx0_opcode |
| || opcode == xtensa_call4_opcode |
| || opcode == xtensa_callx4_opcode |
| || opcode == xtensa_call8_opcode |
| || opcode == xtensa_callx8_opcode |
| || opcode == xtensa_call12_opcode |
| || opcode == xtensa_callx12_opcode |
| || opcode == xtensa_isync_opcode |
| || opcode == xtensa_ret_opcode |
| || opcode == xtensa_ret_n_opcode |
| || opcode == xtensa_retw_opcode |
| || opcode == xtensa_retw_n_opcode |
| || opcode == xtensa_waiti_opcode |
| || opcode == xtensa_rsr_lcount_opcode) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| |
| /* Labels that begin with ".Ln" or ".LM" are unaligned. |
| This allows the debugger to add unaligned labels. |
| Also, the assembler generates stabs labels that need |
| not be aligned: FAKE_LABEL_NAME . {"F", "L", "endfunc"}. */ |
| |
| static bfd_boolean |
| is_unaligned_label (symbolS *sym) |
| { |
| const char *name = S_GET_NAME (sym); |
| static size_t fake_size = 0; |
| |
| if (name |
| && name[0] == '.' |
| && name[1] == 'L' && (name[2] == 'n' || name[2] == 'M')) |
| return TRUE; |
| |
| /* FAKE_LABEL_NAME followed by "F", "L" or "endfunc" */ |
| if (fake_size == 0) |
| fake_size = strlen (FAKE_LABEL_NAME); |
| |
| if (name |
| && strncmp (FAKE_LABEL_NAME, name, fake_size) == 0 |
| && (name[fake_size] == 'F' |
| || name[fake_size] == 'L' |
| || (name[fake_size] == 'e' |
| && strncmp ("endfunc", name+fake_size, 7) == 0))) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| |
| static fragS * |
| next_non_empty_frag (const fragS *fragP) |
| { |
| fragS *next_fragP = fragP->fr_next; |
| |
| /* Sometimes an empty will end up here due storage allocation issues. |
| So we have to skip until we find something legit. */ |
| while (next_fragP && next_fragP->fr_fix == 0) |
| next_fragP = next_fragP->fr_next; |
| |
| if (next_fragP == NULL || next_fragP->fr_fix == 0) |
| return NULL; |
| |
| return next_fragP; |
| } |
| |
| |
| static bfd_boolean |
| next_frag_opcode_is_loop (const fragS *fragP, xtensa_opcode *opcode) |
| { |
| xtensa_opcode out_opcode; |
| const fragS *next_fragP = next_non_empty_frag (fragP); |
| |
| if (next_fragP == NULL) |
| return FALSE; |
| |
| out_opcode = get_opcode_from_buf (next_fragP->fr_literal, 0); |
| if (xtensa_opcode_is_loop (xtensa_default_isa, out_opcode) == 1) |
| { |
| *opcode = out_opcode; |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| |
| static int |
| frag_format_size (const fragS *fragP) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_format fmt; |
| int fmt_size; |
| |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| |
| if (fragP == NULL) |
| return XTENSA_UNDEFINED; |
| |
| xtensa_insnbuf_from_chars (isa, insnbuf, |
| (unsigned char *) fragP->fr_literal, 0); |
| |
| fmt = xtensa_format_decode (isa, insnbuf); |
| if (fmt == XTENSA_UNDEFINED) |
| return XTENSA_UNDEFINED; |
| fmt_size = xtensa_format_length (isa, fmt); |
| |
| /* If the next format won't be changing due to relaxation, just |
| return the length of the first format. */ |
| if (fragP->fr_opcode != fragP->fr_literal) |
| return fmt_size; |
| |
| /* If during relaxation we have to pull an instruction out of a |
| multi-slot instruction, we will return the more conservative |
| number. This works because alignment on bigger instructions |
| is more restrictive than alignment on smaller instructions. |
| This is more conservative than we would like, but it happens |
| infrequently. */ |
| |
| if (xtensa_format_num_slots (xtensa_default_isa, fmt) > 1) |
| return fmt_size; |
| |
| /* If we aren't doing one of our own relaxations or it isn't |
| slot-based, then the insn size won't change. */ |
| if (fragP->fr_type != rs_machine_dependent) |
| return fmt_size; |
| if (fragP->fr_subtype != RELAX_SLOTS) |
| return fmt_size; |
| |
| /* If an instruction is about to grow, return the longer size. */ |
| if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP1 |
| || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2) |
| return 3; |
| |
| if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW) |
| return 2 + fragP->tc_frag_data.text_expansion[0]; |
| |
| return fmt_size; |
| } |
| |
| |
| static int |
| next_frag_format_size (const fragS *fragP) |
| { |
| const fragS *next_fragP = next_non_empty_frag (fragP); |
| return frag_format_size (next_fragP); |
| } |
| |
| |
| /* In early Xtensa Processors, for reasons that are unclear, the ISA |
| required two-byte instructions to be treated as three-byte instructions |
| for loop instruction alignment. This restriction was removed beginning |
| with Xtensa LX. Now the only requirement on loop instruction alignment |
| is that the first instruction of the loop must appear at an address that |
| does not cross a fetch boundary. */ |
| |
| static int |
| get_loop_align_size (int insn_size) |
| { |
| if (insn_size == XTENSA_UNDEFINED) |
| return xtensa_fetch_width; |
| |
| if (enforce_three_byte_loop_align && insn_size == 2) |
| return 3; |
| |
| return insn_size; |
| } |
| |
| |
| /* If the next legit fragment is an end-of-loop marker, |
| switch its state so it will instantiate a NOP. */ |
| |
| static void |
| update_next_frag_state (fragS *fragP) |
| { |
| fragS *next_fragP = fragP->fr_next; |
| fragS *new_target = NULL; |
| |
| if (align_targets) |
| { |
| /* We are guaranteed there will be one of these... */ |
| while (!(next_fragP->fr_type == rs_machine_dependent |
| && (next_fragP->fr_subtype == RELAX_MAYBE_UNREACHABLE |
| || next_fragP->fr_subtype == RELAX_UNREACHABLE))) |
| next_fragP = next_fragP->fr_next; |
| |
| assert (next_fragP->fr_type == rs_machine_dependent |
| && (next_fragP->fr_subtype == RELAX_MAYBE_UNREACHABLE |
| || next_fragP->fr_subtype == RELAX_UNREACHABLE)); |
| |
| /* ...and one of these. */ |
| new_target = next_fragP->fr_next; |
| while (!(new_target->fr_type == rs_machine_dependent |
| && (new_target->fr_subtype == RELAX_MAYBE_DESIRE_ALIGN |
| || new_target->fr_subtype == RELAX_DESIRE_ALIGN))) |
| new_target = new_target->fr_next; |
| |
| assert (new_target->fr_type == rs_machine_dependent |
| && (new_target->fr_subtype == RELAX_MAYBE_DESIRE_ALIGN |
| || new_target->fr_subtype == RELAX_DESIRE_ALIGN)); |
| } |
| |
| while (next_fragP && next_fragP->fr_fix == 0) |
| { |
| if (next_fragP->fr_type == rs_machine_dependent |
| && next_fragP->fr_subtype == RELAX_LOOP_END) |
| { |
| next_fragP->fr_subtype = RELAX_LOOP_END_ADD_NOP; |
| return; |
| } |
| |
| next_fragP = next_fragP->fr_next; |
| } |
| } |
| |
| |
| static bfd_boolean |
| next_frag_is_branch_target (const fragS *fragP) |
| { |
| /* Sometimes an empty will end up here due to storage allocation issues, |
| so we have to skip until we find something legit. */ |
| for (fragP = fragP->fr_next; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->tc_frag_data.is_branch_target) |
| return TRUE; |
| if (fragP->fr_fix != 0) |
| break; |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| next_frag_is_loop_target (const fragS *fragP) |
| { |
| /* Sometimes an empty will end up here due storage allocation issues. |
| So we have to skip until we find something legit. */ |
| for (fragP = fragP->fr_next; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->tc_frag_data.is_loop_target) |
| return TRUE; |
| if (fragP->fr_fix != 0) |
| break; |
| } |
| return FALSE; |
| } |
| |
| |
| static addressT |
| next_frag_pre_opcode_bytes (const fragS *fragp) |
| { |
| const fragS *next_fragp = fragp->fr_next; |
| xtensa_opcode next_opcode; |
| |
| if (!next_frag_opcode_is_loop (fragp, &next_opcode)) |
| return 0; |
| |
| /* Sometimes an empty will end up here due to storage allocation issues, |
| so we have to skip until we find something legit. */ |
| while (next_fragp->fr_fix == 0) |
| next_fragp = next_fragp->fr_next; |
| |
| if (next_fragp->fr_type != rs_machine_dependent) |
| return 0; |
| |
| /* There is some implicit knowledge encoded in here. |
| The LOOP instructions that are NOT RELAX_IMMED have |
| been relaxed. Note that we can assume that the LOOP |
| instruction is in slot 0 because loops aren't bundleable. */ |
| if (next_fragp->tc_frag_data.slot_subtypes[0] > RELAX_IMMED) |
| return get_expanded_loop_offset (next_opcode); |
| |
| return 0; |
| } |
| |
| |
| /* Mark a location where we can later insert literal frags. Update |
| the section's literal_pool_loc, so subsequent literals can be |
| placed nearest to their use. */ |
| |
| static void |
| xtensa_mark_literal_pool_location (void) |
| { |
| /* Any labels pointing to the current location need |
| to be adjusted to after the literal pool. */ |
| emit_state s; |
| fragS *pool_location; |
| |
| if (use_literal_section && !directive_state[directive_absolute_literals]) |
| return; |
| |
| frag_align (2, 0, 0); |
| record_alignment (now_seg, 2); |
| |
| /* We stash info in these frags so we can later move the literal's |
| fixes into this frchain's fix list. */ |
| pool_location = frag_now; |
| frag_now->tc_frag_data.lit_frchain = frchain_now; |
| frag_variant (rs_machine_dependent, 0, 0, |
| RELAX_LITERAL_POOL_BEGIN, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_now->tc_frag_data.lit_seg = now_seg; |
| frag_variant (rs_machine_dependent, 0, 0, |
| RELAX_LITERAL_POOL_END, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| |
| /* Now put a frag into the literal pool that points to this location. */ |
| set_literal_pool_location (now_seg, pool_location); |
| xtensa_switch_to_non_abs_literal_fragment (&s); |
| frag_align (2, 0, 0); |
| record_alignment (now_seg, 2); |
| |
| /* Close whatever frag is there. */ |
| frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_now->tc_frag_data.literal_frag = pool_location; |
| frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_restore_emit_state (&s); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| |
| /* Build a nop of the correct size into tinsn. */ |
| |
| static void |
| build_nop (TInsn *tinsn, int size) |
| { |
| tinsn_init (tinsn); |
| switch (size) |
| { |
| case 2: |
| tinsn->opcode = xtensa_nop_n_opcode; |
| tinsn->ntok = 0; |
| if (tinsn->opcode == XTENSA_UNDEFINED) |
| as_fatal (_("opcode 'NOP.N' unavailable in this configuration")); |
| break; |
| |
| case 3: |
| if (xtensa_nop_opcode == XTENSA_UNDEFINED) |
| { |
| tinsn->opcode = xtensa_or_opcode; |
| set_expr_const (&tinsn->tok[0], 1); |
| set_expr_const (&tinsn->tok[1], 1); |
| set_expr_const (&tinsn->tok[2], 1); |
| tinsn->ntok = 3; |
| } |
| else |
| tinsn->opcode = xtensa_nop_opcode; |
| |
| assert (tinsn->opcode != XTENSA_UNDEFINED); |
| } |
| } |
| |
| |
| /* Assemble a NOP of the requested size in the buffer. User must have |
| allocated "buf" with at least "size" bytes. */ |
| |
| static void |
| assemble_nop (int size, char *buf) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| TInsn tinsn; |
| |
| build_nop (&tinsn, size); |
| |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (xtensa_default_isa); |
| |
| tinsn_to_insnbuf (&tinsn, insnbuf); |
| xtensa_insnbuf_to_chars (xtensa_default_isa, insnbuf, |
| (unsigned char *) buf, 0); |
| } |
| |
| |
| /* Return the number of bytes for the offset of the expanded loop |
| instruction. This should be incorporated into the relaxation |
| specification but is hard-coded here. This is used to auto-align |
| the loop instruction. It is invalid to call this function if the |
| configuration does not have loops or if the opcode is not a loop |
| opcode. */ |
| |
| static addressT |
| get_expanded_loop_offset (xtensa_opcode opcode) |
| { |
| /* This is the OFFSET of the loop instruction in the expanded loop. |
| This MUST correspond directly to the specification of the loop |
| expansion. It will be validated on fragment conversion. */ |
| assert (opcode != XTENSA_UNDEFINED); |
| if (opcode == xtensa_loop_opcode) |
| return 0; |
| if (opcode == xtensa_loopnez_opcode) |
| return 3; |
| if (opcode == xtensa_loopgtz_opcode) |
| return 6; |
| as_fatal (_("get_expanded_loop_offset: invalid opcode")); |
| return 0; |
| } |
| |
| |
| static fragS * |
| get_literal_pool_location (segT seg) |
| { |
| return seg_info (seg)->tc_segment_info_data.literal_pool_loc; |
| } |
| |
| |
| static void |
| set_literal_pool_location (segT seg, fragS *literal_pool_loc) |
| { |
| seg_info (seg)->tc_segment_info_data.literal_pool_loc = literal_pool_loc; |
| } |
| |
| |
| /* Set frag assembly state should be called when a new frag is |
| opened and after a frag has been closed. */ |
| |
| static void |
| xtensa_set_frag_assembly_state (fragS *fragP) |
| { |
| if (!density_supported) |
| fragP->tc_frag_data.is_no_density = TRUE; |
| |
| /* This function is called from subsegs_finish, which is called |
| after xtensa_end, so we can't use "use_transform" or |
| "use_schedule" here. */ |
| if (!directive_state[directive_transform]) |
| fragP->tc_frag_data.is_no_transform = TRUE; |
| if (directive_state[directive_longcalls]) |
| fragP->tc_frag_data.use_longcalls = TRUE; |
| fragP->tc_frag_data.use_absolute_literals = |
| directive_state[directive_absolute_literals]; |
| fragP->tc_frag_data.is_assembly_state_set = TRUE; |
| } |
| |
| |
| static bfd_boolean |
| relaxable_section (asection *sec) |
| { |
| return (sec->flags & SEC_DEBUGGING) == 0; |
| } |
| |
| |
| static void |
| xtensa_find_unmarked_state_frags (void) |
| { |
| segT *seclist; |
| |
| /* Walk over each fragment of all of the current segments. For each |
| unmarked fragment, mark it with the same info as the previous |
| fragment. */ |
| for (seclist = &stdoutput->sections; |
| seclist && *seclist; |
| seclist = &(*seclist)->next) |
| { |
| segT sec = *seclist; |
| segment_info_type *seginfo; |
| fragS *fragP; |
| flagword flags; |
| flags = bfd_get_section_flags (stdoutput, sec); |
| if (flags & SEC_DEBUGGING) |
| continue; |
| if (!(flags & SEC_ALLOC)) |
| continue; |
| |
| seginfo = seg_info (sec); |
| if (seginfo && seginfo->frchainP) |
| { |
| fragS *last_fragP = 0; |
| for (fragP = seginfo->frchainP->frch_root; fragP; |
| fragP = fragP->fr_next) |
| { |
| if (fragP->fr_fix != 0 |
| && !fragP->tc_frag_data.is_assembly_state_set) |
| { |
| if (last_fragP == 0) |
| { |
| as_warn_where (fragP->fr_file, fragP->fr_line, |
| _("assembly state not set for first frag in section %s"), |
| sec->name); |
| } |
| else |
| { |
| fragP->tc_frag_data.is_assembly_state_set = TRUE; |
| fragP->tc_frag_data.is_no_density = |
| last_fragP->tc_frag_data.is_no_density; |
| fragP->tc_frag_data.is_no_transform = |
| last_fragP->tc_frag_data.is_no_transform; |
| fragP->tc_frag_data.use_longcalls = |
| last_fragP->tc_frag_data.use_longcalls; |
| fragP->tc_frag_data.use_absolute_literals = |
| last_fragP->tc_frag_data.use_absolute_literals; |
| } |
| } |
| if (fragP->tc_frag_data.is_assembly_state_set) |
| last_fragP = fragP; |
| } |
| } |
| } |
| } |
| |
| |
| static void |
| xtensa_find_unaligned_branch_targets (bfd *abfd ATTRIBUTE_UNUSED, |
| asection *sec, |
| void *unused ATTRIBUTE_UNUSED) |
| { |
| flagword flags = bfd_get_section_flags (abfd, sec); |
| segment_info_type *seginfo = seg_info (sec); |
| fragS *frag = seginfo->frchainP->frch_root; |
| |
| if (flags & SEC_CODE) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_insnbuf insnbuf = xtensa_insnbuf_alloc (isa); |
| while (frag != NULL) |
| { |
| if (frag->tc_frag_data.is_branch_target) |
| { |
| int op_size; |
| addressT branch_align, frag_addr; |
| xtensa_format fmt; |
| |
| xtensa_insnbuf_from_chars |
| (isa, insnbuf, (unsigned char *) frag->fr_literal, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| op_size = xtensa_format_length (isa, fmt); |
| branch_align = 1 << branch_align_power (sec); |
| frag_addr = frag->fr_address % branch_align; |
| if (frag_addr + op_size > branch_align) |
| as_warn_where (frag->fr_file, frag->fr_line, |
| _("unaligned branch target: %d bytes at 0x%lx"), |
| op_size, (long) frag->fr_address); |
| } |
| frag = frag->fr_next; |
| } |
| xtensa_insnbuf_free (isa, insnbuf); |
| } |
| } |
| |
| |
| static void |
| xtensa_find_unaligned_loops (bfd *abfd ATTRIBUTE_UNUSED, |
| asection *sec, |
| void *unused ATTRIBUTE_UNUSED) |
| { |
| flagword flags = bfd_get_section_flags (abfd, sec); |
| segment_info_type *seginfo = seg_info (sec); |
| fragS *frag = seginfo->frchainP->frch_root; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| if (flags & SEC_CODE) |
| { |
| xtensa_insnbuf insnbuf = xtensa_insnbuf_alloc (isa); |
| while (frag != NULL) |
| { |
| if (frag->tc_frag_data.is_first_loop_insn) |
| { |
| int op_size; |
| addressT frag_addr; |
| xtensa_format fmt; |
| |
| xtensa_insnbuf_from_chars |
| (isa, insnbuf, (unsigned char *) frag->fr_literal, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| op_size = xtensa_format_length (isa, fmt); |
| frag_addr = frag->fr_address % xtensa_fetch_width; |
| |
| if (frag_addr + op_size > xtensa_fetch_width) |
| as_warn_where (frag->fr_file, frag->fr_line, |
| _("unaligned loop: %d bytes at 0x%lx"), |
| op_size, (long) frag->fr_address); |
| } |
| frag = frag->fr_next; |
| } |
| xtensa_insnbuf_free (isa, insnbuf); |
| } |
| } |
| |
| |
| static int |
| xg_apply_fix_value (fixS *fixP, valueT val) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| static xtensa_insnbuf insnbuf = NULL; |
| static xtensa_insnbuf slotbuf = NULL; |
| xtensa_format fmt; |
| int slot; |
| bfd_boolean alt_reloc; |
| xtensa_opcode opcode; |
| char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where; |
| |
| (void) decode_reloc (fixP->fx_r_type, &slot, &alt_reloc); |
| if (alt_reloc) |
| as_fatal (_("unexpected fix")); |
| |
| if (!insnbuf) |
| { |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| } |
| |
| xtensa_insnbuf_from_chars (isa, insnbuf, (unsigned char *) fixpos, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| if (fmt == XTENSA_UNDEFINED) |
| as_fatal (_("undecodable fix")); |
| xtensa_format_get_slot (isa, fmt, slot, insnbuf, slotbuf); |
| opcode = xtensa_opcode_decode (isa, fmt, slot, slotbuf); |
| if (opcode == XTENSA_UNDEFINED) |
| as_fatal (_("undecodable fix")); |
| |
| /* CONST16 immediates are not PC-relative, despite the fact that we |
| reuse the normal PC-relative operand relocations for the low part |
| of a CONST16 operand. */ |
| if (opcode == xtensa_const16_opcode) |
| return 0; |
| |
| xtensa_insnbuf_set_operand (slotbuf, fmt, slot, opcode, |
| get_relaxable_immed (opcode), val, |
| fixP->fx_file, fixP->fx_line); |
| |
| xtensa_format_set_slot (isa, fmt, slot, insnbuf, slotbuf); |
| xtensa_insnbuf_to_chars (isa, insnbuf, (unsigned char *) fixpos, 0); |
| |
| return 1; |
| } |
| |
| |
| /* External Functions and Other GAS Hooks. */ |
| |
| const char * |
| xtensa_target_format (void) |
| { |
| return (target_big_endian ? "elf32-xtensa-be" : "elf32-xtensa-le"); |
| } |
| |
| |
| void |
| xtensa_file_arch_init (bfd *abfd) |
| { |
| bfd_set_private_flags (abfd, 0x100 | 0x200); |
| } |
| |
| |
| void |
| md_number_to_chars (char *buf, valueT val, int n) |
| { |
| if (target_big_endian) |
| number_to_chars_bigendian (buf, val, n); |
| else |
| number_to_chars_littleendian (buf, val, n); |
| } |
| |
| |
| /* This function is called once, at assembler startup time. It should |
| set up all the tables, etc. that the MD part of the assembler will |
| need. */ |
| |
| void |
| md_begin (void) |
| { |
| segT current_section = now_seg; |
| int current_subsec = now_subseg; |
| xtensa_isa isa; |
| |
| xtensa_default_isa = xtensa_isa_init (0, 0); |
| isa = xtensa_default_isa; |
| |
| linkrelax = 1; |
| |
| /* Set up the .literal, .fini.literal and .init.literal sections. */ |
| memset (&default_lit_sections, 0, sizeof (default_lit_sections)); |
| default_lit_sections.init_lit_seg_name = INIT_LITERAL_SECTION_NAME; |
| default_lit_sections.fini_lit_seg_name = FINI_LITERAL_SECTION_NAME; |
| default_lit_sections.lit_seg_name = LITERAL_SECTION_NAME; |
| default_lit_sections.lit4_seg_name = LIT4_SECTION_NAME; |
| |
| subseg_set (current_section, current_subsec); |
| |
| xg_init_vinsn (&cur_vinsn); |
| |
| xtensa_addi_opcode = xtensa_opcode_lookup (isa, "addi"); |
| xtensa_addmi_opcode = xtensa_opcode_lookup (isa, "addmi"); |
| xtensa_call0_opcode = xtensa_opcode_lookup (isa, "call0"); |
| xtensa_call4_opcode = xtensa_opcode_lookup (isa, "call4"); |
| xtensa_call8_opcode = xtensa_opcode_lookup (isa, "call8"); |
| xtensa_call12_opcode = xtensa_opcode_lookup (isa, "call12"); |
| xtensa_callx0_opcode = xtensa_opcode_lookup (isa, "callx0"); |
| xtensa_callx4_opcode = xtensa_opcode_lookup (isa, "callx4"); |
| xtensa_callx8_opcode = xtensa_opcode_lookup (isa, "callx8"); |
| xtensa_callx12_opcode = xtensa_opcode_lookup (isa, "callx12"); |
| xtensa_const16_opcode = xtensa_opcode_lookup (isa, "const16"); |
| xtensa_entry_opcode = xtensa_opcode_lookup (isa, "entry"); |
| xtensa_movi_opcode = xtensa_opcode_lookup (isa, "movi"); |
| xtensa_movi_n_opcode = xtensa_opcode_lookup (isa, "movi.n"); |
| xtensa_isync_opcode = xtensa_opcode_lookup (isa, "isync"); |
| xtensa_jx_opcode = xtensa_opcode_lookup (isa, "jx"); |
| xtensa_l32r_opcode = xtensa_opcode_lookup (isa, "l32r"); |
| xtensa_loop_opcode = xtensa_opcode_lookup (isa, "loop"); |
| xtensa_loopnez_opcode = xtensa_opcode_lookup (isa, "loopnez"); |
| xtensa_loopgtz_opcode = xtensa_opcode_lookup (isa, "loopgtz"); |
| xtensa_nop_opcode = xtensa_opcode_lookup (isa, "nop"); |
| xtensa_nop_n_opcode = xtensa_opcode_lookup (isa, "nop.n"); |
| xtensa_or_opcode = xtensa_opcode_lookup (isa, "or"); |
| xtensa_ret_opcode = xtensa_opcode_lookup (isa, "ret"); |
| xtensa_ret_n_opcode = xtensa_opcode_lookup (isa, "ret.n"); |
| xtensa_retw_opcode = xtensa_opcode_lookup (isa, "retw"); |
| xtensa_retw_n_opcode = xtensa_opcode_lookup (isa, "retw.n"); |
| xtensa_rsr_lcount_opcode = xtensa_opcode_lookup (isa, "rsr.lcount"); |
| xtensa_waiti_opcode = xtensa_opcode_lookup (isa, "waiti"); |
| |
| init_op_placement_info_table (); |
| |
| /* Set up the assembly state. */ |
| if (!frag_now->tc_frag_data.is_assembly_state_set) |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| |
| /* TC_INIT_FIX_DATA hook */ |
| |
| void |
| xtensa_init_fix_data (fixS *x) |
| { |
| x->tc_fix_data.slot = 0; |
| x->tc_fix_data.X_add_symbol = NULL; |
| x->tc_fix_data.X_add_number = 0; |
| } |
| |
| |
| /* tc_frob_label hook */ |
| |
| void |
| xtensa_frob_label (symbolS *sym) |
| { |
| float freq; |
| |
| if (cur_vinsn.inside_bundle) |
| { |
| as_bad (_("labels are not valid inside bundles")); |
| return; |
| } |
| |
| freq = get_subseg_target_freq (now_seg, now_subseg); |
| |
| /* Since the label was already attached to a frag associated with the |
| previous basic block, it now needs to be reset to the current frag. */ |
| symbol_set_frag (sym, frag_now); |
| S_SET_VALUE (sym, (valueT) frag_now_fix ()); |
| |
| if (generating_literals) |
| xtensa_add_literal_sym (sym); |
| else |
| xtensa_add_insn_label (sym); |
| |
| if (symbol_get_tc (sym)->is_loop_target) |
| { |
| if ((get_last_insn_flags (now_seg, now_subseg) |
| & FLAG_IS_BAD_LOOPEND) != 0) |
| as_bad (_("invalid last instruction for a zero-overhead loop")); |
| |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_var (rs_machine_dependent, 4, 4, RELAX_LOOP_END, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| |
| xtensa_set_frag_assembly_state (frag_now); |
| xtensa_move_labels (frag_now, 0, TRUE); |
| } |
| |
| /* No target aligning in the absolute section. */ |
| if (now_seg != absolute_section |
| && do_align_targets () |
| && !is_unaligned_label (sym) |
| && !generating_literals) |
| { |
| xtensa_set_frag_assembly_state (frag_now); |
| |
| frag_var (rs_machine_dependent, |
| 0, (int) freq, |
| RELAX_DESIRE_ALIGN_IF_TARGET, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| xtensa_move_labels (frag_now, 0, TRUE); |
| } |
| |
| /* We need to mark the following properties even if we aren't aligning. */ |
| |
| /* If the label is already known to be a branch target, i.e., a |
| forward branch, mark the frag accordingly. Backward branches |
| are handled by xg_add_branch_and_loop_targets. */ |
| if (symbol_get_tc (sym)->is_branch_target) |
| symbol_get_frag (sym)->tc_frag_data.is_branch_target = TRUE; |
| |
| /* Loops only go forward, so they can be identified here. */ |
| if (symbol_get_tc (sym)->is_loop_target) |
| symbol_get_frag (sym)->tc_frag_data.is_loop_target = TRUE; |
| |
| dwarf2_emit_label (sym); |
| } |
| |
| |
| /* tc_unrecognized_line hook */ |
| |
| int |
| xtensa_unrecognized_line (int ch) |
| { |
| switch (ch) |
| { |
| case '{' : |
| if (cur_vinsn.inside_bundle == 0) |
| { |
| /* PR8110: Cannot emit line number info inside a FLIX bundle |
| when using --gstabs. Temporarily disable debug info. */ |
| generate_lineno_debug (); |
| if (debug_type == DEBUG_STABS) |
| { |
| xt_saved_debug_type = debug_type; |
| debug_type = DEBUG_NONE; |
| } |
| |
| cur_vinsn.inside_bundle = 1; |
| } |
| else |
| { |
| as_bad (_("extra opening brace")); |
| return 0; |
| } |
| break; |
| |
| case '}' : |
| if (cur_vinsn.inside_bundle) |
| finish_vinsn (&cur_vinsn); |
| else |
| { |
| as_bad (_("extra closing brace")); |
| return 0; |
| } |
| break; |
| default: |
| as_bad (_("syntax error")); |
| return 0; |
| } |
| return 1; |
| } |
| |
| |
| /* md_flush_pending_output hook */ |
| |
| void |
| xtensa_flush_pending_output (void) |
| { |
| if (cur_vinsn.inside_bundle) |
| as_bad (_("missing closing brace")); |
| |
| /* If there is a non-zero instruction fragment, close it. */ |
| if (frag_now_fix () != 0 && frag_now->tc_frag_data.is_insn) |
| { |
| frag_wane (frag_now); |
| frag_new (0); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| frag_now->tc_frag_data.is_insn = FALSE; |
| |
| xtensa_clear_insn_labels (); |
| } |
| |
| |
| /* We had an error while parsing an instruction. The string might look |
| like this: "insn arg1, arg2 }". If so, we need to see the closing |
| brace and reset some fields. Otherwise, the vinsn never gets closed |
| and the num_slots field will grow past the end of the array of slots, |
| and bad things happen. */ |
| |
| static void |
| error_reset_cur_vinsn (void) |
| { |
| if (cur_vinsn.inside_bundle) |
| { |
| if (*input_line_pointer == '}' |
| || *(input_line_pointer - 1) == '}' |
| || *(input_line_pointer - 2) == '}') |
| xg_clear_vinsn (&cur_vinsn); |
| } |
| } |
| |
| |
| void |
| md_assemble (char *str) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| char *opname, *file_name; |
| unsigned opnamelen; |
| bfd_boolean has_underbar = FALSE; |
| char *arg_strings[MAX_INSN_ARGS]; |
| int num_args; |
| TInsn orig_insn; /* Original instruction from the input. */ |
| |
| tinsn_init (&orig_insn); |
| |
| /* Split off the opcode. */ |
| opnamelen = strspn (str, "abcdefghijklmnopqrstuvwxyz_/0123456789."); |
| opname = xmalloc (opnamelen + 1); |
| memcpy (opname, str, opnamelen); |
| opname[opnamelen] = '\0'; |
| |
| num_args = tokenize_arguments (arg_strings, str + opnamelen); |
| if (num_args == -1) |
| { |
| as_bad (_("syntax error")); |
| return; |
| } |
| |
| if (xg_translate_idioms (&opname, &num_args, arg_strings)) |
| return; |
| |
| /* Check for an underbar prefix. */ |
| if (*opname == '_') |
| { |
| has_underbar = TRUE; |
| opname += 1; |
| } |
| |
| orig_insn.insn_type = ITYPE_INSN; |
| orig_insn.ntok = 0; |
| orig_insn.is_specific_opcode = (has_underbar || !use_transform ()); |
| |
| orig_insn.opcode = xtensa_opcode_lookup (isa, opname); |
| if (orig_insn.opcode == XTENSA_UNDEFINED) |
| { |
| xtensa_format fmt = xtensa_format_lookup (isa, opname); |
| if (fmt == XTENSA_UNDEFINED) |
| { |
| as_bad (_("unknown opcode or format name '%s'"), opname); |
| error_reset_cur_vinsn (); |
| return; |
| } |
| if (!cur_vinsn.inside_bundle) |
| { |
| as_bad (_("format names only valid inside bundles")); |
| error_reset_cur_vinsn (); |
| return; |
| } |
| if (cur_vinsn.format != XTENSA_UNDEFINED) |
| as_warn (_("multiple formats specified for one bundle; using '%s'"), |
| opname); |
| cur_vinsn.format = fmt; |
| free (has_underbar ? opname - 1 : opname); |
| error_reset_cur_vinsn (); |
| return; |
| } |
| |
| /* Parse the arguments. */ |
| if (parse_arguments (&orig_insn, num_args, arg_strings)) |
| { |
| as_bad (_("syntax error")); |
| error_reset_cur_vinsn (); |
| return; |
| } |
| |
| /* Free the opcode and argument strings, now that they've been parsed. */ |
| free (has_underbar ? opname - 1 : opname); |
| opname = 0; |
| while (num_args-- > 0) |
| free (arg_strings[num_args]); |
| |
| /* Get expressions for invisible operands. */ |
| if (get_invisible_operands (&orig_insn)) |
| { |
| error_reset_cur_vinsn (); |
| return; |
| } |
| |
| /* Check for the right number and type of arguments. */ |
| if (tinsn_check_arguments (&orig_insn)) |
| { |
| error_reset_cur_vinsn (); |
| return; |
| } |
| |
| /* A FLIX bundle may be spread across multiple input lines. We want to |
| report the first such line in the debug information. Record the line |
| number for each TInsn (assume the file name doesn't change), so the |
| first line can be found later. */ |
| as_where (&file_name, &orig_insn.linenum); |
| |
| xg_add_branch_and_loop_targets (&orig_insn); |
| |
| /* Check that immediate value for ENTRY is >= 16. */ |
| if (orig_insn.opcode == xtensa_entry_opcode && orig_insn.ntok >= 3) |
| { |
| expressionS *exp = &orig_insn.tok[2]; |
| if (exp->X_op == O_constant && exp->X_add_number < 16) |
| as_warn (_("entry instruction with stack decrement < 16")); |
| } |
| |
| /* Finish it off: |
| assemble_tokens (opcode, tok, ntok); |
| expand the tokens from the orig_insn into the |
| stack of instructions that will not expand |
| unless required at relaxation time. */ |
| |
| if (!cur_vinsn.inside_bundle) |
| emit_single_op (&orig_insn); |
| else /* We are inside a bundle. */ |
| { |
| cur_vinsn.slots[cur_vinsn.num_slots] = orig_insn; |
| cur_vinsn.num_slots++; |
| if (*input_line_pointer == '}' |
| || *(input_line_pointer - 1) == '}' |
| || *(input_line_pointer - 2) == '}') |
| finish_vinsn (&cur_vinsn); |
| } |
| |
| /* We've just emitted a new instruction so clear the list of labels. */ |
| xtensa_clear_insn_labels (); |
| } |
| |
| |
| /* HANDLE_ALIGN hook */ |
| |
| /* For a .align directive, we mark the previous block with the alignment |
| information. This will be placed in the object file in the |
| property section corresponding to this section. */ |
| |
| void |
| xtensa_handle_align (fragS *fragP) |
| { |
| if (linkrelax |
| && ! fragP->tc_frag_data.is_literal |
| && (fragP->fr_type == rs_align |
| || fragP->fr_type == rs_align_code) |
| && fragP->fr_address + fragP->fr_fix > 0 |
| && fragP->fr_offset > 0 |
| && now_seg != bss_section) |
| { |
| fragP->tc_frag_data.is_align = TRUE; |
| fragP->tc_frag_data.alignment = fragP->fr_offset; |
| } |
| |
| if (fragP->fr_type == rs_align_test) |
| { |
| int count; |
| count = fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix; |
| if (count != 0) |
| as_bad_where (fragP->fr_file, fragP->fr_line, |
| _("unaligned entry instruction")); |
| } |
| } |
| |
| |
| /* TC_FRAG_INIT hook */ |
| |
| void |
| xtensa_frag_init (fragS *frag) |
| { |
| xtensa_set_frag_assembly_state (frag); |
| } |
| |
| |
| symbolS * |
| md_undefined_symbol (char *name ATTRIBUTE_UNUSED) |
| { |
| return NULL; |
| } |
| |
| |
| /* Round up a section size to the appropriate boundary. */ |
| |
| valueT |
| md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size) |
| { |
| return size; /* Byte alignment is fine. */ |
| } |
| |
| |
| long |
| md_pcrel_from (fixS *fixP) |
| { |
| char *insn_p; |
| static xtensa_insnbuf insnbuf = NULL; |
| static xtensa_insnbuf slotbuf = NULL; |
| int opnum; |
| uint32 opnd_value; |
| xtensa_opcode opcode; |
| xtensa_format fmt; |
| int slot; |
| xtensa_isa isa = xtensa_default_isa; |
| valueT addr = fixP->fx_where + fixP->fx_frag->fr_address; |
| bfd_boolean alt_reloc; |
| |
| if (fixP->fx_r_type == BFD_RELOC_XTENSA_ASM_EXPAND) |
| return 0; |
| |
| if (!insnbuf) |
| { |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| } |
| |
| insn_p = &fixP->fx_frag->fr_literal[fixP->fx_where]; |
| xtensa_insnbuf_from_chars (isa, insnbuf, (unsigned char *) insn_p, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| |
| if (fmt == XTENSA_UNDEFINED) |
| as_fatal (_("bad instruction format")); |
| |
| if (decode_reloc (fixP->fx_r_type, &slot, &alt_reloc) != 0) |
| as_fatal (_("invalid relocation")); |
| |
| xtensa_format_get_slot (isa, fmt, slot, insnbuf, slotbuf); |
| opcode = xtensa_opcode_decode (isa, fmt, slot, slotbuf); |
| |
| /* Check for "alternate" relocations (operand not specified). None |
| of the current uses for these are really PC-relative. */ |
| if (alt_reloc || opcode == xtensa_const16_opcode) |
| { |
| if (opcode != xtensa_l32r_opcode |
| && opcode != xtensa_const16_opcode) |
| as_fatal (_("invalid relocation for '%s' instruction"), |
| xtensa_opcode_name (isa, opcode)); |
| return 0; |
| } |
| |
| opnum = get_relaxable_immed (opcode); |
| opnd_value = 0; |
| if (xtensa_operand_is_PCrelative (isa, opcode, opnum) != 1 |
| || xtensa_operand_do_reloc (isa, opcode, opnum, &opnd_value, addr)) |
| { |
| as_bad_where (fixP->fx_file, |
| fixP->fx_line, |
| _("invalid relocation for operand %d of '%s'"), |
| opnum, xtensa_opcode_name (isa, opcode)); |
| return 0; |
| } |
| return 0 - opnd_value; |
| } |
| |
| |
| /* TC_FORCE_RELOCATION hook */ |
| |
| int |
| xtensa_force_relocation (fixS *fix) |
| { |
| switch (fix->fx_r_type) |
| { |
| case BFD_RELOC_XTENSA_ASM_EXPAND: |
| case BFD_RELOC_XTENSA_SLOT0_ALT: |
| case BFD_RELOC_XTENSA_SLOT1_ALT: |
| case BFD_RELOC_XTENSA_SLOT2_ALT: |
| case BFD_RELOC_XTENSA_SLOT3_ALT: |
| case BFD_RELOC_XTENSA_SLOT4_ALT: |
| case BFD_RELOC_XTENSA_SLOT5_ALT: |
| case BFD_RELOC_XTENSA_SLOT6_ALT: |
| case BFD_RELOC_XTENSA_SLOT7_ALT: |
| case BFD_RELOC_XTENSA_SLOT8_ALT: |
| case BFD_RELOC_XTENSA_SLOT9_ALT: |
| case BFD_RELOC_XTENSA_SLOT10_ALT: |
| case BFD_RELOC_XTENSA_SLOT11_ALT: |
| case BFD_RELOC_XTENSA_SLOT12_ALT: |
| case BFD_RELOC_XTENSA_SLOT13_ALT: |
| case BFD_RELOC_XTENSA_SLOT14_ALT: |
| return 1; |
| default: |
| break; |
| } |
| |
| if (linkrelax && fix->fx_addsy |
| && relaxable_section (S_GET_SEGMENT (fix->fx_addsy))) |
| return 1; |
| |
| return generic_force_reloc (fix); |
| } |
| |
| |
| /* TC_VALIDATE_FIX_SUB hook */ |
| |
| int |
| xtensa_validate_fix_sub (fixS *fix) |
| { |
| segT add_symbol_segment, sub_symbol_segment; |
| |
| /* The difference of two symbols should be resolved by the assembler when |
| linkrelax is not set. If the linker may relax the section containing |
| the symbols, then an Xtensa DIFF relocation must be generated so that |
| the linker knows to adjust the difference value. */ |
| if (!linkrelax || fix->fx_addsy == NULL) |
| return 0; |
| |
| /* Make sure both symbols are in the same segment, and that segment is |
| "normal" and relaxable. If the segment is not "normal", then the |
| fix is not valid. If the segment is not "relaxable", then the fix |
| should have been handled earlier. */ |
| add_symbol_segment = S_GET_SEGMENT (fix->fx_addsy); |
| if (! SEG_NORMAL (add_symbol_segment) || |
| ! relaxable_section (add_symbol_segment)) |
| return 0; |
| sub_symbol_segment = S_GET_SEGMENT (fix->fx_subsy); |
| return (sub_symbol_segment == add_symbol_segment); |
| } |
| |
| |
| /* NO_PSEUDO_DOT hook */ |
| |
| /* This function has nothing to do with pseudo dots, but this is the |
| nearest macro to where the check needs to take place. FIXME: This |
| seems wrong. */ |
| |
| bfd_boolean |
| xtensa_check_inside_bundle (void) |
| { |
| if (cur_vinsn.inside_bundle && input_line_pointer[-1] == '.') |
| as_bad (_("directives are not valid inside bundles")); |
| |
| /* This function must always return FALSE because it is called via a |
| macro that has nothing to do with bundling. */ |
| return FALSE; |
| } |
| |
| |
| /* md_elf_section_change_hook */ |
| |
| void |
| xtensa_elf_section_change_hook (void) |
| { |
| /* Set up the assembly state. */ |
| if (!frag_now->tc_frag_data.is_assembly_state_set) |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| |
| /* tc_fix_adjustable hook */ |
| |
| bfd_boolean |
| xtensa_fix_adjustable (fixS *fixP) |
| { |
| /* An offset is not allowed in combination with the difference of two |
| symbols, but that cannot be easily detected after a local symbol |
| has been adjusted to a (section+offset) form. Return 0 so that such |
| an fix will not be adjusted. */ |
| if (fixP->fx_subsy && fixP->fx_addsy && fixP->fx_offset |
| && relaxable_section (S_GET_SEGMENT (fixP->fx_subsy))) |
| return 0; |
| |
| /* We need the symbol name for the VTABLE entries. */ |
| if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT |
| || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) |
| return 0; |
| |
| return 1; |
| } |
| |
| |
| void |
| md_apply_fix (fixS *fixP, valueT *valP, segT seg) |
| { |
| char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where; |
| valueT val = 0; |
| |
| /* Subtracted symbols are only allowed for a few relocation types, and |
| unless linkrelax is enabled, they should not make it to this point. */ |
| if (fixP->fx_subsy && !(linkrelax && (fixP->fx_r_type == BFD_RELOC_32 |
| || fixP->fx_r_type == BFD_RELOC_16 |
| || fixP->fx_r_type == BFD_RELOC_8))) |
| as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex")); |
| |
| switch (fixP->fx_r_type) |
| { |
| case BFD_RELOC_32: |
| case BFD_RELOC_16: |
| case BFD_RELOC_8: |
| if (fixP->fx_subsy) |
| { |
| switch (fixP->fx_r_type) |
| { |
| case BFD_RELOC_8: |
| fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF8; |
| break; |
| case BFD_RELOC_16: |
| fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF16; |
| break; |
| case BFD_RELOC_32: |
| fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF32; |
| break; |
| default: |
| break; |
| } |
| |
| /* An offset is only allowed when it results from adjusting a |
| local symbol into a section-relative offset. If the offset |
| came from the original expression, tc_fix_adjustable will have |
| prevented the fix from being converted to a section-relative |
| form so that we can flag the error here. */ |
| if (fixP->fx_offset != 0 && !symbol_section_p (fixP->fx_addsy)) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("cannot represent subtraction with an offset")); |
| |
| val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset |
| - S_GET_VALUE (fixP->fx_subsy)); |
| |
| /* The difference value gets written out, and the DIFF reloc |
| identifies the address of the subtracted symbol (i.e., the one |
| with the lowest address). */ |
| *valP = val; |
| fixP->fx_offset -= val; |
| fixP->fx_subsy = NULL; |
| } |
| else if (! fixP->fx_addsy) |
| { |
| val = *valP; |
| fixP->fx_done = 1; |
| } |
| /* fall through */ |
| |
| case BFD_RELOC_XTENSA_PLT: |
| md_number_to_chars (fixpos, val, fixP->fx_size); |
| fixP->fx_no_overflow = 0; /* Use the standard overflow check. */ |
| break; |
| |
| case BFD_RELOC_XTENSA_SLOT0_OP: |
| case BFD_RELOC_XTENSA_SLOT1_OP: |
| case BFD_RELOC_XTENSA_SLOT2_OP: |
| case BFD_RELOC_XTENSA_SLOT3_OP: |
| case BFD_RELOC_XTENSA_SLOT4_OP: |
| case BFD_RELOC_XTENSA_SLOT5_OP: |
| case BFD_RELOC_XTENSA_SLOT6_OP: |
| case BFD_RELOC_XTENSA_SLOT7_OP: |
| case BFD_RELOC_XTENSA_SLOT8_OP: |
| case BFD_RELOC_XTENSA_SLOT9_OP: |
| case BFD_RELOC_XTENSA_SLOT10_OP: |
| case BFD_RELOC_XTENSA_SLOT11_OP: |
| case BFD_RELOC_XTENSA_SLOT12_OP: |
| case BFD_RELOC_XTENSA_SLOT13_OP: |
| case BFD_RELOC_XTENSA_SLOT14_OP: |
| if (linkrelax) |
| { |
| /* Write the tentative value of a PC-relative relocation to a |
| local symbol into the instruction. The value will be ignored |
| by the linker, and it makes the object file disassembly |
| readable when all branch targets are encoded in relocations. */ |
| |
| assert (fixP->fx_addsy); |
| if (S_GET_SEGMENT (fixP->fx_addsy) == seg && !fixP->fx_plt |
| && !S_FORCE_RELOC (fixP->fx_addsy, 1)) |
| { |
| val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset |
| - md_pcrel_from (fixP)); |
| (void) xg_apply_fix_value (fixP, val); |
| } |
| } |
| else if (! fixP->fx_addsy) |
| { |
| val = *valP; |
| if (xg_apply_fix_value (fixP, val)) |
| fixP->fx_done = 1; |
| } |
| break; |
| |
| case BFD_RELOC_XTENSA_ASM_EXPAND: |
| case BFD_RELOC_XTENSA_SLOT0_ALT: |
| case BFD_RELOC_XTENSA_SLOT1_ALT: |
| case BFD_RELOC_XTENSA_SLOT2_ALT: |
| case BFD_RELOC_XTENSA_SLOT3_ALT: |
| case BFD_RELOC_XTENSA_SLOT4_ALT: |
| case BFD_RELOC_XTENSA_SLOT5_ALT: |
| case BFD_RELOC_XTENSA_SLOT6_ALT: |
| case BFD_RELOC_XTENSA_SLOT7_ALT: |
| case BFD_RELOC_XTENSA_SLOT8_ALT: |
| case BFD_RELOC_XTENSA_SLOT9_ALT: |
| case BFD_RELOC_XTENSA_SLOT10_ALT: |
| case BFD_RELOC_XTENSA_SLOT11_ALT: |
| case BFD_RELOC_XTENSA_SLOT12_ALT: |
| case BFD_RELOC_XTENSA_SLOT13_ALT: |
| case BFD_RELOC_XTENSA_SLOT14_ALT: |
| /* These all need to be resolved at link-time. Do nothing now. */ |
| break; |
| |
| case BFD_RELOC_VTABLE_INHERIT: |
| case BFD_RELOC_VTABLE_ENTRY: |
| fixP->fx_done = 0; |
| break; |
| |
| default: |
| as_bad (_("unhandled local relocation fix %s"), |
| bfd_get_reloc_code_name (fixP->fx_r_type)); |
| } |
| } |
| |
| |
| char * |
| md_atof (int type, char *litP, int *sizeP) |
| { |
| int prec; |
| LITTLENUM_TYPE words[4]; |
| char *t; |
| int i; |
| |
| switch (type) |
| { |
| case 'f': |
| prec = 2; |
| break; |
| |
| case 'd': |
| prec = 4; |
| break; |
| |
| default: |
| *sizeP = 0; |
| return "bad call to md_atof"; |
| } |
| |
| t = atof_ieee (input_line_pointer, type, words); |
| if (t) |
| input_line_pointer = t; |
| |
| *sizeP = prec * 2; |
| |
| for (i = prec - 1; i >= 0; i--) |
| { |
| int idx = i; |
| if (target_big_endian) |
| idx = (prec - 1 - i); |
| |
| md_number_to_chars (litP, (valueT) words[idx], 2); |
| litP += 2; |
| } |
| |
| return NULL; |
| } |
| |
| |
| int |
| md_estimate_size_before_relax (fragS *fragP, segT seg ATTRIBUTE_UNUSED) |
| { |
| return total_frag_text_expansion (fragP); |
| } |
| |
| |
| /* Translate internal representation of relocation info to BFD target |
| format. */ |
| |
| arelent * |
| tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) |
| { |
| arelent *reloc; |
| |
| reloc = (arelent *) xmalloc (sizeof (arelent)); |
| reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); |
| *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); |
| reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; |
| |
| /* Make sure none of our internal relocations make it this far. |
| They'd better have been fully resolved by this point. */ |
| assert ((int) fixp->fx_r_type > 0); |
| |
| reloc->addend = fixp->fx_offset; |
| |
| reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type); |
| if (reloc->howto == NULL) |
| { |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("cannot represent `%s' relocation in object file"), |
| bfd_get_reloc_code_name (fixp->fx_r_type)); |
| free (reloc->sym_ptr_ptr); |
| free (reloc); |
| return NULL; |
| } |
| |
| if (!fixp->fx_pcrel != !reloc->howto->pc_relative) |
| as_fatal (_("internal error? cannot generate `%s' relocation"), |
| bfd_get_reloc_code_name (fixp->fx_r_type)); |
| |
| return reloc; |
| } |
| |
| |
| /* Checks for resource conflicts between instructions. */ |
| |
| /* The func unit stuff could be implemented as bit-vectors rather |
| than the iterative approach here. If it ends up being too |
| slow, we will switch it. */ |
| |
| resource_table * |
| new_resource_table (void *data, |
| int cycles, |
| int nu, |
| unit_num_copies_func uncf, |
| opcode_num_units_func onuf, |
| opcode_funcUnit_use_unit_func ouuf, |
| opcode_funcUnit_use_stage_func ousf) |
| { |
| int i; |
| resource_table *rt = (resource_table *) xmalloc (sizeof (resource_table)); |
| rt->data = data; |
| rt->cycles = cycles; |
| rt->allocated_cycles = cycles; |
| rt->num_units = nu; |
| rt->unit_num_copies = uncf; |
| rt->opcode_num_units = onuf; |
| rt->opcode_unit_use = ouuf; |
| rt->opcode_unit_stage = ousf; |
| |
| rt->units = (unsigned char **) xcalloc (cycles, sizeof (unsigned char *)); |
| for (i = 0; i < cycles; i++) |
| rt->units[i] = (unsigned char *) xcalloc (nu, sizeof (unsigned char)); |
| |
| return rt; |
| } |
| |
| |
| void |
| clear_resource_table (resource_table *rt) |
| { |
| int i, j; |
| for (i = 0; i < rt->allocated_cycles; i++) |
| for (j = 0; j < rt->num_units; j++) |
| rt->units[i][j] = 0; |
| } |
| |
| |
| /* We never shrink it, just fake it into thinking so. */ |
| |
| void |
| resize_resource_table (resource_table *rt, int cycles) |
| { |
| int i, old_cycles; |
| |
| rt->cycles = cycles; |
| if (cycles <= rt->allocated_cycles) |
| return; |
| |
| old_cycles = rt->allocated_cycles; |
| rt->allocated_cycles = cycles; |
| |
| rt->units = xrealloc (rt->units, |
| rt->allocated_cycles * sizeof (unsigned char *)); |
| for (i = 0; i < old_cycles; i++) |
| rt->units[i] = xrealloc (rt->units[i], |
| rt->num_units * sizeof (unsigned char)); |
| for (i = old_cycles; i < cycles; i++) |
| rt->units[i] = xcalloc (rt->num_units, sizeof (unsigned char)); |
| } |
| |
| |
| bfd_boolean |
| resources_available (resource_table *rt, xtensa_opcode opcode, int cycle) |
| { |
| int i; |
| int uses = (rt->opcode_num_units) (rt->data, opcode); |
| |
| for (i = 0; i < uses; i++) |
| { |
| xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i); |
| int stage = (rt->opcode_unit_stage) (rt->data, opcode, i); |
| int copies_in_use = rt->units[stage + cycle][unit]; |
| int copies = (rt->unit_num_copies) (rt->data, unit); |
| if (copies_in_use >= copies) |
| return FALSE; |
| } |
| return TRUE; |
| } |
| |
| |
| void |
| reserve_resources (resource_table *rt, xtensa_opcode opcode, int cycle) |
| { |
| int i; |
| int uses = (rt->opcode_num_units) (rt->data, opcode); |
| |
| for (i = 0; i < uses; i++) |
| { |
| xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i); |
| int stage = (rt->opcode_unit_stage) (rt->data, opcode, i); |
| /* Note that this allows resources to be oversubscribed. That's |
| essential to the way the optional scheduler works. |
| resources_available reports when a resource is over-subscribed, |
| so it's easy to tell. */ |
| rt->units[stage + cycle][unit]++; |
| } |
| } |
| |
| |
| void |
| release_resources (resource_table *rt, xtensa_opcode opcode, int cycle) |
| { |
| int i; |
| int uses = (rt->opcode_num_units) (rt->data, opcode); |
| |
| for (i = 0; i < uses; i++) |
| { |
| xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i); |
| int stage = (rt->opcode_unit_stage) (rt->data, opcode, i); |
| assert (rt->units[stage + cycle][unit] > 0); |
| rt->units[stage + cycle][unit]--; |
| } |
| } |
| |
| |
| /* Wrapper functions make parameterized resource reservation |
| more convenient. */ |
| |
| int |
| opcode_funcUnit_use_unit (void *data, xtensa_opcode opcode, int idx) |
| { |
| xtensa_funcUnit_use *use = xtensa_opcode_funcUnit_use (data, opcode, idx); |
| return use->unit; |
| } |
| |
| |
| int |
| opcode_funcUnit_use_stage (void *data, xtensa_opcode opcode, int idx) |
| { |
| xtensa_funcUnit_use *use = xtensa_opcode_funcUnit_use (data, opcode, idx); |
| return use->stage; |
| } |
| |
| |
| /* Note that this function does not check issue constraints, but |
| solely whether the hardware is available to execute the given |
| instructions together. It also doesn't check if the tinsns |
| write the same state, or access the same tieports. That is |
| checked by check_t1_t2_reads_and_writes. */ |
| |
| static bfd_boolean |
| resources_conflict (vliw_insn *vinsn) |
| { |
| int i; |
| static resource_table *rt = NULL; |
| |
| /* This is the most common case by far. Optimize it. */ |
| if (vinsn->num_slots == 1) |
| return FALSE; |
| |
| if (rt == NULL) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| rt = new_resource_table |
| (isa, xtensa_isa_num_pipe_stages (isa), |
| xtensa_isa_num_funcUnits (isa), |
| (unit_num_copies_func) xtensa_funcUnit_num_copies, |
| (opcode_num_units_func) xtensa_opcode_num_funcUnit_uses, |
| opcode_funcUnit_use_unit, |
| opcode_funcUnit_use_stage); |
| } |
| |
| clear_resource_table (rt); |
| |
| for (i = 0; i < vinsn->num_slots; i++) |
| { |
| if (!resources_available (rt, vinsn->slots[i].opcode, 0)) |
| return TRUE; |
| reserve_resources (rt, vinsn->slots[i].opcode, 0); |
| } |
| |
| return FALSE; |
| } |
| |
| |
| /* finish_vinsn, emit_single_op and helper functions. */ |
| |
| static bfd_boolean find_vinsn_conflicts (vliw_insn *); |
| static xtensa_format xg_find_narrowest_format (vliw_insn *); |
| static void xg_assemble_vliw_tokens (vliw_insn *); |
| |
| |
| /* We have reached the end of a bundle; emit into the frag. */ |
| |
| static void |
| finish_vinsn (vliw_insn *vinsn) |
| { |
| IStack slotstack; |
| int i; |
| char *file_name; |
| unsigned line; |
| |
| if (find_vinsn_conflicts (vinsn)) |
| { |
| xg_clear_vinsn (vinsn); |
| return; |
| } |
| |
| /* First, find a format that works. */ |
| if (vinsn->format == XTENSA_UNDEFINED) |
| vinsn->format = xg_find_narrowest_format (vinsn); |
| |
| if (vinsn->format == XTENSA_UNDEFINED) |
| { |
| as_where (&file_name, &line); |
| as_bad_where (file_name, line, |
| _("couldn't find a valid instruction format")); |
| fprintf (stderr, _(" ops were: ")); |
| for (i = 0; i < vinsn->num_slots; i++) |
| fprintf (stderr, _(" %s;"), |
| xtensa_opcode_name (xtensa_default_isa, |
| vinsn->slots[i].opcode)); |
| fprintf (stderr, _("\n")); |
| xg_clear_vinsn (vinsn); |
| return; |
| } |
| |
| if (vinsn->num_slots |
| != xtensa_format_num_slots (xtensa_default_isa, vinsn->format)) |
| { |
| as_bad (_("format '%s' allows %d slots, but there are %d opcodes"), |
| xtensa_format_name (xtensa_default_isa, vinsn->format), |
| xtensa_format_num_slots (xtensa_default_isa, vinsn->format), |
| vinsn->num_slots); |
| xg_clear_vinsn (vinsn); |
| return; |
| } |
| |
| if (resources_conflict (vinsn)) |
| { |
| as_where (&file_name, &line); |
| as_bad_where (file_name, line, _("illegal resource usage in bundle")); |
| fprintf (stderr, " ops were: "); |
| for (i = 0; i < vinsn->num_slots; i++) |
| fprintf (stderr, " %s;", |
| xtensa_opcode_name (xtensa_default_isa, |
| vinsn->slots[i].opcode)); |
| fprintf (stderr, "\n"); |
| xg_clear_vinsn (vinsn); |
| return; |
| } |
| |
| for (i = 0; i < vinsn->num_slots; i++) |
| { |
| if (vinsn->slots[i].opcode != XTENSA_UNDEFINED) |
| { |
| symbolS *lit_sym = NULL; |
| int j; |
| bfd_boolean e = FALSE; |
| bfd_boolean saved_density = density_supported; |
| |
| /* We don't want to narrow ops inside multi-slot bundles. */ |
| if (vinsn->num_slots > 1) |
| density_supported = FALSE; |
| |
| istack_init (&slotstack); |
| if (vinsn->slots[i].opcode == xtensa_nop_opcode) |
| { |
| vinsn->slots[i].opcode = |
| xtensa_format_slot_nop_opcode (xtensa_default_isa, |
| vinsn->format, i); |
| vinsn->slots[i].ntok = 0; |
| } |
| |
| if (xg_expand_assembly_insn (&slotstack, &vinsn->slots[i])) |
| { |
| e = TRUE; |
| continue; |
| } |
| |
| density_supported = saved_density; |
| |
| if (e) |
| { |
| xg_clear_vinsn (vinsn); |
| return; |
| } |
| |
| for (j = 0; j < slotstack.ninsn; j++) |
| { |
| TInsn *insn = &slotstack.insn[j]; |
| if (insn->insn_type == ITYPE_LITERAL) |
| { |
| assert (lit_sym == NULL); |
| lit_sym = xg_assemble_literal (insn); |
| } |
| else |
| { |
| assert (insn->insn_type == ITYPE_INSN); |
| if (lit_sym) |
| xg_resolve_literals (insn, lit_sym); |
| if (j != slotstack.ninsn - 1) |
| emit_single_op (insn); |
| } |
| } |
| |
| if (vinsn->num_slots > 1) |
| { |
| if (opcode_fits_format_slot |
| (slotstack.insn[slotstack.ninsn - 1].opcode, |
| vinsn->format, i)) |
| { |
| vinsn->slots[i] = slotstack.insn[slotstack.ninsn - 1]; |
| } |
| else |
| { |
| emit_single_op (&slotstack.insn[slotstack.ninsn - 1]); |
| if (vinsn->format == XTENSA_UNDEFINED) |
| vinsn->slots[i].opcode = xtensa_nop_opcode; |
| else |
| vinsn->slots[i].opcode |
| = xtensa_format_slot_nop_opcode (xtensa_default_isa, |
| vinsn->format, i); |
| |
| vinsn->slots[i].ntok = 0; |
| } |
| } |
| else |
| { |
| vinsn->slots[0] = slotstack.insn[slotstack.ninsn - 1]; |
| vinsn->format = XTENSA_UNDEFINED; |
| } |
| } |
| } |
| |
| /* Now check resource conflicts on the modified bundle. */ |
| if (resources_conflict (vinsn)) |
| { |
| as_where (&file_name, &line); |
| as_bad_where (file_name, line, _("illegal resource usage in bundle")); |
| fprintf (stderr, " ops were: "); |
| for (i = 0; i < vinsn->num_slots; i++) |
| fprintf (stderr, " %s;", |
| xtensa_opcode_name (xtensa_default_isa, |
| vinsn->slots[i].opcode)); |
| fprintf (stderr, "\n"); |
| xg_clear_vinsn (vinsn); |
| return; |
| } |
| |
| /* First, find a format that works. */ |
| if (vinsn->format == XTENSA_UNDEFINED) |
| vinsn->format = xg_find_narrowest_format (vinsn); |
| |
| xg_assemble_vliw_tokens (vinsn); |
| |
| xg_clear_vinsn (vinsn); |
| } |
| |
| |
| /* Given an vliw instruction, what conflicts are there in register |
| usage and in writes to states and queues? |
| |
| This function does two things: |
| 1. Reports an error when a vinsn contains illegal combinations |
| of writes to registers states or queues. |
| 2. Marks individual tinsns as not relaxable if the combination |
| contains antidependencies. |
| |
| Job 2 handles things like swap semantics in instructions that need |
| to be relaxed. For example, |
| |
| addi a0, a1, 100000 |
| |
| normally would be relaxed to |
| |
| l32r a0, some_label |
| add a0, a1, a0 |
| |
| _but_, if the above instruction is bundled with an a0 reader, e.g., |
| |
| { addi a0, a1, 10000 ; add a2, a0, a4 ; } |
| |
| then we can't relax it into |
| |
| l32r a0, some_label |
| { add a0, a1, a0 ; add a2, a0, a4 ; } |
| |
| because the value of a0 is trashed before the second add can read it. */ |
| |
| static char check_t1_t2_reads_and_writes (TInsn *, TInsn *); |
| |
| static bfd_boolean |
| find_vinsn_conflicts (vliw_insn *vinsn) |
| { |
| int i, j; |
| int branches = 0; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| assert (!past_xtensa_end); |
| |
| for (i = 0 ; i < vinsn->num_slots; i++) |
| { |
| TInsn *op1 = &vinsn->slots[i]; |
| if (op1->is_specific_opcode) |
| op1->keep_wide = TRUE; |
| else |
| op1->keep_wide = FALSE; |
| } |
| |
| for (i = 0 ; i < vinsn->num_slots; i++) |
| { |
| TInsn *op1 = &vinsn->slots[i]; |
| |
| if (xtensa_opcode_is_branch (isa, op1->opcode) == 1) |
| branches++; |
| |
| for (j = 0; j < vinsn->num_slots; j++) |
| { |
| if (i != j) |
| { |
| TInsn *op2 = &vinsn->slots[j]; |
| char conflict_type = check_t1_t2_reads_and_writes (op1, op2); |
| switch (conflict_type) |
| { |
| case 'c': |
| as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same register"), |
| xtensa_opcode_name (isa, op1->opcode), i, |
| xtensa_opcode_name (isa, op2->opcode), j); |
| return TRUE; |
| case 'd': |
| as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same state"), |
| xtensa_opcode_name (isa, op1->opcode), i, |
| xtensa_opcode_name (isa, op2->opcode), j); |
| return TRUE; |
| case 'e': |
| as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) write the same port"), |
| xtensa_opcode_name (isa, op1->opcode), i, |
| xtensa_opcode_name (isa, op2->opcode), j); |
| return TRUE; |
| case 'f': |
| as_bad (_("opcodes '%s' (slot %d) and '%s' (slot %d) both have volatile port accesses"), |
| xtensa_opcode_name (isa, op1->opcode), i, |
| xtensa_opcode_name (isa, op2->opcode), j); |
| return TRUE; |
| default: |
| /* Everything is OK. */ |
| break; |
| } |
| op2->is_specific_opcode = (op2->is_specific_opcode |
| || conflict_type == 'a'); |
| } |
| } |
| } |
| |
| if (branches > 1) |
| { |
| as_bad (_("multiple branches or jumps in the same bundle")); |
| return TRUE; |
| } |
| |
| return FALSE; |
| } |
| |
| |
| /* Check how the state used by t1 and t2 relate. |
| Cases found are: |
| |
| case A: t1 reads a register t2 writes (an antidependency within a bundle) |
| case B: no relationship between what is read and written (both could |
| read the same reg though) |
| case C: t1 writes a register t2 writes (a register conflict within a |
| bundle) |
| case D: t1 writes a state that t2 also writes |
| case E: t1 writes a tie queue that t2 also writes |
| case F: two volatile queue accesses |
| */ |
| |
| static char |
| check_t1_t2_reads_and_writes (TInsn *t1, TInsn *t2) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_regfile t1_regfile, t2_regfile; |
| int t1_reg, t2_reg; |
| int t1_base_reg, t1_last_reg; |
| int t2_base_reg, t2_last_reg; |
| char t1_inout, t2_inout; |
| int i, j; |
| char conflict = 'b'; |
| int t1_states; |
| int t2_states; |
| int t1_interfaces; |
| int t2_interfaces; |
| bfd_boolean t1_volatile = FALSE; |
| bfd_boolean t2_volatile = FALSE; |
| |
| /* Check registers. */ |
| for (j = 0; j < t2->ntok; j++) |
| { |
| if (xtensa_operand_is_register (isa, t2->opcode, j) != 1) |
| continue; |
| |
| t2_regfile = xtensa_operand_regfile (isa, t2->opcode, j); |
| t2_base_reg = t2->tok[j].X_add_number; |
| t2_last_reg = t2_base_reg + xtensa_operand_num_regs (isa, t2->opcode, j); |
| |
| for (i = 0; i < t1->ntok; i++) |
| { |
| if (xtensa_operand_is_register (isa, t1->opcode, i) != 1) |
| continue; |
| |
| t1_regfile = xtensa_operand_regfile (isa, t1->opcode, i); |
| |
| if (t1_regfile != t2_regfile) |
| continue; |
| |
| t1_inout = xtensa_operand_inout (isa, t1->opcode, i); |
| t2_inout = xtensa_operand_inout (isa, t2->opcode, j); |
| |
| if (xtensa_operand_is_known_reg (isa, t1->opcode, i) == 0 |
| || xtensa_operand_is_known_reg (isa, t2->opcode, j) == 0) |
| { |
| if (t1_inout == 'm' || t1_inout == 'o' |
| || t2_inout == 'm' || t2_inout == 'o') |
| { |
| conflict = 'a'; |
| continue; |
| } |
| } |
| |
| t1_base_reg = t1->tok[i].X_add_number; |
| t1_last_reg = (t1_base_reg |
| + xtensa_operand_num_regs (isa, t1->opcode, i)); |
| |
| for (t1_reg = t1_base_reg; t1_reg < t1_last_reg; t1_reg++) |
| { |
| for (t2_reg = t2_base_reg; t2_reg < t2_last_reg; t2_reg++) |
| { |
| if (t1_reg != t2_reg) |
| continue; |
| |
| if (t2_inout == 'i' && (t1_inout == 'm' || t1_inout == 'o')) |
| { |
| conflict = 'a'; |
| continue; |
| } |
| |
| if (t1_inout == 'i' && (t2_inout == 'm' || t2_inout == 'o')) |
| { |
| conflict = 'a'; |
| continue; |
| } |
| |
| if (t1_inout != 'i' && t2_inout != 'i') |
| return 'c'; |
| } |
| } |
| } |
| } |
| |
| /* Check states. */ |
| t1_states = xtensa_opcode_num_stateOperands (isa, t1->opcode); |
| t2_states = xtensa_opcode_num_stateOperands (isa, t2->opcode); |
| for (j = 0; j < t2_states; j++) |
| { |
| xtensa_state t2_so = xtensa_stateOperand_state (isa, t2->opcode, j); |
| t2_inout = xtensa_stateOperand_inout (isa, t2->opcode, j); |
| for (i = 0; i < t1_states; i++) |
| { |
| xtensa_state t1_so = xtensa_stateOperand_state (isa, t1->opcode, i); |
| t1_inout = xtensa_stateOperand_inout (isa, t1->opcode, i); |
| if (t1_so != t2_so) |
| continue; |
| |
| if (t2_inout == 'i' && (t1_inout == 'm' || t1_inout == 'o')) |
| { |
| conflict = 'a'; |
| continue; |
| } |
| |
| if (t1_inout == 'i' && (t2_inout == 'm' || t2_inout == 'o')) |
| { |
| conflict = 'a'; |
| continue; |
| } |
| |
| if (t1_inout != 'i' && t2_inout != 'i') |
| return 'd'; |
| } |
| } |
| |
| /* Check tieports. */ |
| t1_interfaces = xtensa_opcode_num_interfaceOperands (isa, t1->opcode); |
| t2_interfaces = xtensa_opcode_num_interfaceOperands (isa, t2->opcode); |
| for (j = 0; j < t2_interfaces; j++) |
| { |
| xtensa_interface t2_int |
| = xtensa_interfaceOperand_interface (isa, t2->opcode, j); |
| int t2_class = xtensa_interface_class_id (isa, t2_int); |
| |
| t2_inout = xtensa_interface_inout (isa, t2_int); |
| if (xtensa_interface_has_side_effect (isa, t2_int) == 1) |
| t2_volatile = TRUE; |
| |
| for (i = 0; i < t1_interfaces; i++) |
| { |
| xtensa_interface t1_int |
| = xtensa_interfaceOperand_interface (isa, t1->opcode, j); |
| int t1_class = xtensa_interface_class_id (isa, t1_int); |
| |
| t1_inout = xtensa_interface_inout (isa, t1_int); |
| if (xtensa_interface_has_side_effect (isa, t1_int) == 1) |
| t1_volatile = TRUE; |
| |
| if (t1_volatile && t2_volatile && (t1_class == t2_class)) |
| return 'f'; |
| |
| if (t1_int != t2_int) |
| continue; |
| |
| if (t2_inout == 'i' && t1_inout == 'o') |
| { |
| conflict = 'a'; |
| continue; |
| } |
| |
| if (t1_inout == 'i' && t2_inout == 'o') |
| { |
| conflict = 'a'; |
| continue; |
| } |
| |
| if (t1_inout != 'i' && t2_inout != 'i') |
| return 'e'; |
| } |
| } |
| |
| return conflict; |
| } |
| |
| |
| static xtensa_format |
| xg_find_narrowest_format (vliw_insn *vinsn) |
| { |
| /* Right now we assume that the ops within the vinsn are properly |
| ordered for the slots that the programmer wanted them in. In |
| other words, we don't rearrange the ops in hopes of finding a |
| better format. The scheduler handles that. */ |
| |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_format format; |
| vliw_insn v_copy = *vinsn; |
| xtensa_opcode nop_opcode = xtensa_nop_opcode; |
| |
| if (vinsn->num_slots == 1) |
| return xg_get_single_format (vinsn->slots[0].opcode); |
| |
| for (format = 0; format < xtensa_isa_num_formats (isa); format++) |
| { |
| v_copy = *vinsn; |
| if (xtensa_format_num_slots (isa, format) == v_copy.num_slots) |
| { |
| int slot; |
| int fit = 0; |
| for (slot = 0; slot < v_copy.num_slots; slot++) |
| { |
| if (v_copy.slots[slot].opcode == nop_opcode) |
| { |
| v_copy.slots[slot].opcode = |
| xtensa_format_slot_nop_opcode (isa, format, slot); |
| v_copy.slots[slot].ntok = 0; |
| } |
| |
| if (opcode_fits_format_slot (v_copy.slots[slot].opcode, |
| format, slot)) |
| fit++; |
| else if (v_copy.num_slots > 1) |
| { |
| TInsn widened; |
| /* Try the widened version. */ |
| if (!v_copy.slots[slot].keep_wide |
| && !v_copy.slots[slot].is_specific_opcode |
| && xg_is_single_relaxable_insn (&v_copy.slots[slot], |
| &widened, TRUE) |
| && opcode_fits_format_slot (widened.opcode, |
| format, slot)) |
| { |
| v_copy.slots[slot] = widened; |
| fit++; |
| } |
| } |
| } |
| if (fit == v_copy.num_slots) |
| { |
| *vinsn = v_copy; |
| xtensa_format_encode (isa, format, vinsn->insnbuf); |
| vinsn->format = format; |
| break; |
| } |
| } |
| } |
| |
| if (format == xtensa_isa_num_formats (isa)) |
| return XTENSA_UNDEFINED; |
| |
| return format; |
| } |
| |
| |
| /* Return the additional space needed in a frag |
| for possible relaxations of any ops in a VLIW insn. |
| Also fill out the relaxations that might be required of |
| each tinsn in the vinsn. */ |
| |
| static int |
| relaxation_requirements (vliw_insn *vinsn, bfd_boolean *pfinish_frag) |
| { |
| bfd_boolean finish_frag = FALSE; |
| int extra_space = 0; |
| int slot; |
| |
| for (slot = 0; slot < vinsn->num_slots; slot++) |
| { |
| TInsn *tinsn = &vinsn->slots[slot]; |
| if (!tinsn_has_symbolic_operands (tinsn)) |
| { |
| /* A narrow instruction could be widened later to help |
| alignment issues. */ |
| if (xg_is_single_relaxable_insn (tinsn, 0, TRUE) |
| && !tinsn->is_specific_opcode |
| && vinsn->num_slots == 1) |
| { |
| /* Difference in bytes between narrow and wide insns... */ |
| extra_space += 1; |
| tinsn->subtype = RELAX_NARROW; |
| } |
| } |
| else |
| { |
| if (workaround_b_j_loop_end |
| && tinsn->opcode == xtensa_jx_opcode |
| && use_transform ()) |
| { |
| /* Add 2 of these. */ |
| extra_space += 3; /* for the nop size */ |
| tinsn->subtype = RELAX_ADD_NOP_IF_PRE_LOOP_END; |
| } |
| |
| /* Need to assemble it with space for the relocation. */ |
| if (xg_is_relaxable_insn (tinsn, 0) |
| && !tinsn->is_specific_opcode) |
| { |
| int max_size = xg_get_max_insn_widen_size (tinsn->opcode); |
| int max_literal_size = |
| xg_get_max_insn_widen_literal_size (tinsn->opcode); |
| |
| tinsn->literal_space = max_literal_size; |
| |
| tinsn->subtype = RELAX_IMMED; |
| extra_space += max_size; |
| } |
| else |
| { |
| /* A fix record will be added for this instruction prior |
| to relaxation, so make it end the frag. */ |
| finish_frag = TRUE; |
| } |
| } |
| } |
| *pfinish_frag = finish_frag; |
| return extra_space; |
| } |
| |
| |
| static void |
| bundle_tinsn (TInsn *tinsn, vliw_insn *vinsn) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int slot, chosen_slot; |
| |
| vinsn->format = xg_get_single_format (tinsn->opcode); |
| assert (vinsn->format != XTENSA_UNDEFINED); |
| vinsn->num_slots = xtensa_format_num_slots (isa, vinsn->format); |
| |
| chosen_slot = xg_get_single_slot (tinsn->opcode); |
| for (slot = 0; slot < vinsn->num_slots; slot++) |
| { |
| if (slot == chosen_slot) |
| vinsn->slots[slot] = *tinsn; |
| else |
| { |
| vinsn->slots[slot].opcode = |
| xtensa_format_slot_nop_opcode (isa, vinsn->format, slot); |
| vinsn->slots[slot].ntok = 0; |
| vinsn->slots[slot].insn_type = ITYPE_INSN; |
| } |
| } |
| } |
| |
| |
| static bfd_boolean |
| emit_single_op (TInsn *orig_insn) |
| { |
| int i; |
| IStack istack; /* put instructions into here */ |
| symbolS *lit_sym = NULL; |
| symbolS *label_sym = NULL; |
| |
| istack_init (&istack); |
| |
| /* Special-case for "movi aX, foo" which is guaranteed to need relaxing. |
| Because the scheduling and bundling characteristics of movi and |
| l32r or const16 are so different, we can do much better if we relax |
| it prior to scheduling and bundling, rather than after. */ |
| if ((orig_insn->opcode == xtensa_movi_opcode |
| || orig_insn->opcode == xtensa_movi_n_opcode) |
| && !cur_vinsn.inside_bundle |
| && (orig_insn->tok[1].X_op == O_symbol |
| || orig_insn->tok[1].X_op == O_pltrel) |
| && !orig_insn->is_specific_opcode && use_transform ()) |
| xg_assembly_relax (&istack, orig_insn, now_seg, frag_now, 0, 1, 0); |
| else |
| if (xg_expand_assembly_insn (&istack, orig_insn)) |
| return TRUE; |
| |
| for (i = 0; i < istack.ninsn; i++) |
| { |
| TInsn *insn = &istack.insn[i]; |
| switch (insn->insn_type) |
| { |
| case ITYPE_LITERAL: |
| assert (lit_sym == NULL); |
| lit_sym = xg_assemble_literal (insn); |
| break; |
| case ITYPE_LABEL: |
| { |
| static int relaxed_sym_idx = 0; |
| char *label = xmalloc (strlen (FAKE_LABEL_NAME) + 12); |
| sprintf (label, "%s_rl_%x", FAKE_LABEL_NAME, relaxed_sym_idx++); |
| colon (label); |
| assert (label_sym == NULL); |
| label_sym = symbol_find_or_make (label); |
| assert (label_sym); |
| free (label); |
| } |
| break; |
| case ITYPE_INSN: |
| { |
| vliw_insn v; |
| if (lit_sym) |
| xg_resolve_literals (insn, lit_sym); |
| if (label_sym) |
| xg_resolve_labels (insn, label_sym); |
| xg_init_vinsn (&v); |
| bundle_tinsn (insn, &v); |
| finish_vinsn (&v); |
| xg_free_vinsn (&v); |
| } |
| break; |
| default: |
| assert (0); |
| break; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| static int |
| total_frag_text_expansion (fragS *fragP) |
| { |
| int slot; |
| int total_expansion = 0; |
| |
| for (slot = 0; slot < MAX_SLOTS; slot++) |
| total_expansion += fragP->tc_frag_data.text_expansion[slot]; |
| |
| return total_expansion; |
| } |
| |
| |
| /* Emit a vliw instruction to the current fragment. */ |
| |
| static void |
| xg_assemble_vliw_tokens (vliw_insn *vinsn) |
| { |
| bfd_boolean finish_frag; |
| bfd_boolean is_jump = FALSE; |
| bfd_boolean is_branch = FALSE; |
| xtensa_isa isa = xtensa_default_isa; |
| int i; |
| int insn_size; |
| int extra_space; |
| char *f = NULL; |
| int slot; |
| unsigned current_line, best_linenum; |
| char *current_file; |
| |
| best_linenum = UINT_MAX; |
| |
| if (generating_literals) |
| { |
| static int reported = 0; |
| if (reported < 4) |
| as_bad_where (frag_now->fr_file, frag_now->fr_line, |
| _("cannot assemble into a literal fragment")); |
| if (reported == 3) |
| as_bad (_("...")); |
| reported++; |
| return; |
| } |
| |
| if (frag_now_fix () != 0 |
| && (! frag_now->tc_frag_data.is_insn |
| || (vinsn_has_specific_opcodes (vinsn) && use_transform ()) |
| || !use_transform () != frag_now->tc_frag_data.is_no_transform |
| || (directive_state[directive_longcalls] |
| != frag_now->tc_frag_data.use_longcalls) |
| || (directive_state[directive_absolute_literals] |
| != frag_now->tc_frag_data.use_absolute_literals))) |
| { |
| frag_wane (frag_now); |
| frag_new (0); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| if (workaround_a0_b_retw |
| && vinsn->num_slots == 1 |
| && (get_last_insn_flags (now_seg, now_subseg) & FLAG_IS_A0_WRITER) != 0 |
| && xtensa_opcode_is_branch (isa, vinsn->slots[0].opcode) == 1 |
| && use_transform ()) |
| { |
| has_a0_b_retw = TRUE; |
| |
| /* Mark this fragment with the special RELAX_ADD_NOP_IF_A0_B_RETW. |
| After the first assembly pass we will check all of them and |
| add a nop if needed. */ |
| frag_now->tc_frag_data.is_insn = TRUE; |
| frag_var (rs_machine_dependent, 4, 4, |
| RELAX_ADD_NOP_IF_A0_B_RETW, |
| frag_now->fr_symbol, |
| frag_now->fr_offset, |
| NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_now->tc_frag_data.is_insn = TRUE; |
| frag_var (rs_machine_dependent, 4, 4, |
| RELAX_ADD_NOP_IF_A0_B_RETW, |
| frag_now->fr_symbol, |
| frag_now->fr_offset, |
| NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| for (i = 0; i < vinsn->num_slots; i++) |
| { |
| /* See if the instruction implies an aligned section. */ |
| if (xtensa_opcode_is_loop (isa, vinsn->slots[i].opcode) == 1) |
| record_alignment (now_seg, 2); |
| |
| /* Also determine the best line number for debug info. */ |
| best_linenum = vinsn->slots[i].linenum < best_linenum |
| ? vinsn->slots[i].linenum : best_linenum; |
| } |
| |
| /* Special cases for instructions that force an alignment... */ |
| /* None of these opcodes are bundle-able. */ |
| if (xtensa_opcode_is_loop (isa, vinsn->slots[0].opcode) == 1) |
| { |
| int max_fill; |
| |
| /* Remember the symbol that marks the end of the loop in the frag |
| that marks the start of the loop. This way we can easily find |
| the end of the loop at the beginning, without adding special code |
| to mark the loop instructions themselves. */ |
| symbolS *target_sym = NULL; |
| if (vinsn->slots[0].tok[1].X_op == O_symbol) |
| target_sym = vinsn->slots[0].tok[1].X_add_symbol; |
| |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_now->tc_frag_data.is_insn = TRUE; |
| |
| max_fill = get_text_align_max_fill_size |
| (get_text_align_power (xtensa_fetch_width), |
| TRUE, frag_now->tc_frag_data.is_no_density); |
| |
| if (use_transform ()) |
| frag_var (rs_machine_dependent, max_fill, max_fill, |
| RELAX_ALIGN_NEXT_OPCODE, target_sym, 0, NULL); |
| else |
| frag_var (rs_machine_dependent, 0, 0, |
| RELAX_CHECK_ALIGN_NEXT_OPCODE, target_sym, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| |
| xtensa_move_labels (frag_now, 0, FALSE); |
| } |
| |
| if (vinsn->slots[0].opcode == xtensa_entry_opcode |
| && !vinsn->slots[0].is_specific_opcode) |
| { |
| xtensa_mark_literal_pool_location (); |
| xtensa_move_labels (frag_now, 0, TRUE); |
| frag_var (rs_align_test, 1, 1, 0, NULL, 2, NULL); |
| } |
| |
| if (vinsn->num_slots == 1) |
| { |
| if (workaround_a0_b_retw && use_transform ()) |
| set_last_insn_flags (now_seg, now_subseg, FLAG_IS_A0_WRITER, |
| is_register_writer (&vinsn->slots[0], "a", 0)); |
| |
| set_last_insn_flags (now_seg, now_subseg, FLAG_IS_BAD_LOOPEND, |
| is_bad_loopend_opcode (&vinsn->slots[0])); |
| } |
| else |
| set_last_insn_flags (now_seg, now_subseg, FLAG_IS_BAD_LOOPEND, FALSE); |
| |
| insn_size = xtensa_format_length (isa, vinsn->format); |
| |
| extra_space = relaxation_requirements (vinsn, &finish_frag); |
| |
| /* vinsn_to_insnbuf will produce the error. */ |
| if (vinsn->format != XTENSA_UNDEFINED) |
| { |
| f = frag_more (insn_size + extra_space); |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_now->tc_frag_data.is_insn = TRUE; |
| } |
| |
| vinsn_to_insnbuf (vinsn, f, frag_now, FALSE); |
| if (vinsn->format == XTENSA_UNDEFINED) |
| return; |
| |
| xtensa_insnbuf_to_chars (isa, vinsn->insnbuf, (unsigned char *) f, 0); |
| |
| /* Temporarily set the logical line number to the one we want to appear |
| in the debug information. */ |
| as_where (¤t_file, ¤t_line); |
| new_logical_line (current_file, best_linenum); |
| dwarf2_emit_insn (insn_size + extra_space); |
| new_logical_line (current_file, current_line); |
| |
| for (slot = 0; slot < vinsn->num_slots; slot++) |
| { |
| TInsn *tinsn = &vinsn->slots[slot]; |
| frag_now->tc_frag_data.slot_subtypes[slot] = tinsn->subtype; |
| frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol; |
| frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset; |
| frag_now->tc_frag_data.literal_frags[slot] = tinsn->literal_frag; |
| if (tinsn->literal_space != 0) |
| xg_assemble_literal_space (tinsn->literal_space, slot); |
| |
| if (tinsn->subtype == RELAX_NARROW) |
| assert (vinsn->num_slots == 1); |
| if (xtensa_opcode_is_jump (isa, tinsn->opcode) == 1) |
| is_jump = TRUE; |
| if (xtensa_opcode_is_branch (isa, tinsn->opcode) == 1) |
| is_branch = TRUE; |
| |
| if (tinsn->subtype || tinsn->symbol || tinsn->offset |
| || tinsn->literal_frag || is_jump || is_branch) |
| finish_frag = TRUE; |
| } |
| |
| if (vinsn_has_specific_opcodes (vinsn) && use_transform ()) |
| frag_now->tc_frag_data.is_specific_opcode = TRUE; |
| |
| if (finish_frag) |
| { |
| frag_variant (rs_machine_dependent, |
| extra_space, extra_space, RELAX_SLOTS, |
| frag_now->fr_symbol, frag_now->fr_offset, f); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| /* Special cases for loops: |
| close_loop_end should be inserted AFTER short_loop. |
| Make sure that CLOSE loops are processed BEFORE short_loops |
| when converting them. */ |
| |
| /* "short_loop": Add a NOP if the loop is < 4 bytes. */ |
| if (xtensa_opcode_is_loop (isa, vinsn->slots[0].opcode) |
| && !vinsn->slots[0].is_specific_opcode) |
| { |
| if (workaround_short_loop && use_transform ()) |
| { |
| maybe_has_short_loop = TRUE; |
| frag_now->tc_frag_data.is_insn = TRUE; |
| frag_var (rs_machine_dependent, 4, 4, |
| RELAX_ADD_NOP_IF_SHORT_LOOP, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| frag_now->tc_frag_data.is_insn = TRUE; |
| frag_var (rs_machine_dependent, 4, 4, |
| RELAX_ADD_NOP_IF_SHORT_LOOP, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| } |
| |
| /* "close_loop_end": Add up to 12 bytes of NOPs to keep a |
| loop at least 12 bytes away from another loop's end. */ |
| if (workaround_close_loop_end && use_transform ()) |
| { |
| maybe_has_close_loop_end = TRUE; |
| frag_now->tc_frag_data.is_insn = TRUE; |
| frag_var (rs_machine_dependent, 12, 12, |
| RELAX_ADD_NOP_IF_CLOSE_LOOP_END, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| } |
| } |
| |
| if (use_transform ()) |
| { |
| if (is_jump) |
| { |
| assert (finish_frag); |
| frag_var (rs_machine_dependent, |
| UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH, |
| RELAX_UNREACHABLE, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| else if (is_branch && do_align_targets ()) |
| { |
| assert (finish_frag); |
| frag_var (rs_machine_dependent, |
| UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH, |
| RELAX_MAYBE_UNREACHABLE, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_var (rs_machine_dependent, |
| 0, 0, |
| RELAX_MAYBE_DESIRE_ALIGN, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| } |
| |
| /* Now, if the original opcode was a call... */ |
| if (do_align_targets () |
| && xtensa_opcode_is_call (isa, vinsn->slots[0].opcode) == 1) |
| { |
| float freq = get_subseg_total_freq (now_seg, now_subseg); |
| frag_now->tc_frag_data.is_insn = TRUE; |
| frag_var (rs_machine_dependent, 4, (int) freq, RELAX_DESIRE_ALIGN, |
| frag_now->fr_symbol, frag_now->fr_offset, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| |
| if (vinsn_has_specific_opcodes (vinsn) && use_transform ()) |
| { |
| frag_wane (frag_now); |
| frag_new (0); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| } |
| |
| |
| /* xtensa_end and helper functions. */ |
| |
| static void xtensa_cleanup_align_frags (void); |
| static void xtensa_fix_target_frags (void); |
| static void xtensa_mark_narrow_branches (void); |
| static void xtensa_mark_zcl_first_insns (void); |
| static void xtensa_fix_a0_b_retw_frags (void); |
| static void xtensa_fix_b_j_loop_end_frags (void); |
| static void xtensa_fix_close_loop_end_frags (void); |
| static void xtensa_fix_short_loop_frags (void); |
| static void xtensa_sanity_check (void); |
| |
| void |
| xtensa_end (void) |
| { |
| directive_balance (); |
| xtensa_flush_pending_output (); |
| |
| past_xtensa_end = TRUE; |
| |
| xtensa_move_literals (); |
| |
| xtensa_reorder_segments (); |
| xtensa_cleanup_align_frags (); |
| xtensa_fix_target_frags (); |
| if (workaround_a0_b_retw && has_a0_b_retw) |
| xtensa_fix_a0_b_retw_frags (); |
| if (workaround_b_j_loop_end) |
| xtensa_fix_b_j_loop_end_frags (); |
| |
| /* "close_loop_end" should be processed BEFORE "short_loop". */ |
| if (workaround_close_loop_end && maybe_has_close_loop_end) |
| xtensa_fix_close_loop_end_frags (); |
| |
| if (workaround_short_loop && maybe_has_short_loop) |
| xtensa_fix_short_loop_frags (); |
| if (align_targets) |
| xtensa_mark_narrow_branches (); |
| xtensa_mark_zcl_first_insns (); |
| |
| xtensa_sanity_check (); |
| } |
| |
| |
| static void |
| xtensa_cleanup_align_frags (void) |
| { |
| frchainS *frchP; |
| |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if ((fragP->fr_type == rs_align |
| || fragP->fr_type == rs_align_code |
| || (fragP->fr_type == rs_machine_dependent |
| && (fragP->fr_subtype == RELAX_DESIRE_ALIGN |
| || fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET))) |
| && fragP->fr_fix == 0) |
| { |
| fragS *next = fragP->fr_next; |
| |
| while (next |
| && next->fr_fix == 0 |
| && next->fr_type == rs_machine_dependent |
| && next->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET) |
| { |
| frag_wane (next); |
| next = next->fr_next; |
| } |
| } |
| /* If we don't widen branch targets, then they |
| will be easier to align. */ |
| if (fragP->tc_frag_data.is_branch_target |
| && fragP->fr_opcode == fragP->fr_literal |
| && fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_SLOTS |
| && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW) |
| frag_wane (fragP); |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_UNREACHABLE) |
| fragP->tc_frag_data.is_unreachable = TRUE; |
| } |
| } |
| } |
| |
| |
| /* Re-process all of the fragments looking to convert all of the |
| RELAX_DESIRE_ALIGN_IF_TARGET fragments. If there is a branch |
| target in the next fragment, convert this to RELAX_DESIRE_ALIGN. |
| Otherwise, convert to a .fill 0. */ |
| |
| static void |
| xtensa_fix_target_frags (void) |
| { |
| frchainS *frchP; |
| |
| /* When this routine is called, all of the subsections are still intact |
| so we walk over subsections instead of sections. */ |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_DESIRE_ALIGN_IF_TARGET) |
| { |
| if (next_frag_is_branch_target (fragP)) |
| fragP->fr_subtype = RELAX_DESIRE_ALIGN; |
| else |
| frag_wane (fragP); |
| } |
| } |
| } |
| } |
| |
| |
| static bfd_boolean is_narrow_branch_guaranteed_in_range (fragS *, TInsn *); |
| |
| static void |
| xtensa_mark_narrow_branches (void) |
| { |
| frchainS *frchP; |
| |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_SLOTS |
| && fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED) |
| { |
| vliw_insn vinsn; |
| |
| vinsn_from_chars (&vinsn, fragP->fr_opcode); |
| tinsn_immed_from_frag (&vinsn.slots[0], fragP, 0); |
| |
| if (vinsn.num_slots == 1 |
| && xtensa_opcode_is_branch (xtensa_default_isa, |
| vinsn.slots[0].opcode) |
| && xg_get_single_size (vinsn.slots[0].opcode) == 2 |
| && is_narrow_branch_guaranteed_in_range (fragP, |
| &vinsn.slots[0])) |
| { |
| fragP->fr_subtype = RELAX_SLOTS; |
| fragP->tc_frag_data.slot_subtypes[0] = RELAX_NARROW; |
| fragP->tc_frag_data.is_aligning_branch = 1; |
| } |
| } |
| } |
| } |
| } |
| |
| |
| /* A branch is typically widened only when its target is out of |
| range. However, we would like to widen them to align a subsequent |
| branch target when possible. |
| |
| Because the branch relaxation code is so convoluted, the optimal solution |
| (combining the two cases) is difficult to get right in all circumstances. |
| We therefore go with an "almost as good" solution, where we only |
| use for alignment narrow branches that definitely will not expand to a |
| jump and a branch. These functions find and mark these cases. */ |
| |
| /* The range in bytes of BNEZ.N and BEQZ.N. The target operand is encoded |
| as PC + 4 + imm6, where imm6 is a 6-bit immediate ranging from 0 to 63. |
| We start counting beginning with the frag after the 2-byte branch, so the |
| maximum offset is (4 - 2) + 63 = 65. */ |
| #define MAX_IMMED6 65 |
| |
| static offsetT unrelaxed_frag_max_size (fragS *); |
| |
| static bfd_boolean |
| is_narrow_branch_guaranteed_in_range (fragS *fragP, TInsn *tinsn) |
| { |
| const expressionS *expr = &tinsn->tok[1]; |
| symbolS *symbolP = expr->X_add_symbol; |
| offsetT max_distance = expr->X_add_number; |
| fragS *target_frag; |
| |
| if (expr->X_op != O_symbol) |
| return FALSE; |
| |
| target_frag = symbol_get_frag (symbolP); |
| |
| max_distance += (S_GET_VALUE (symbolP) - target_frag->fr_address); |
| if (is_branch_jmp_to_next (tinsn, fragP)) |
| return FALSE; |
| |
| /* The branch doesn't branch over it's own frag, |
| but over the subsequent ones. */ |
| fragP = fragP->fr_next; |
| while (fragP != NULL && fragP != target_frag && max_distance <= MAX_IMMED6) |
| { |
| max_distance += unrelaxed_frag_max_size (fragP); |
| fragP = fragP->fr_next; |
| } |
| if (max_distance <= MAX_IMMED6 && fragP == target_frag) |
| return TRUE; |
| return FALSE; |
| } |
| |
| |
| static void |
| xtensa_mark_zcl_first_insns (void) |
| { |
| frchainS *frchP; |
| |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE |
| || fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)) |
| { |
| /* Find the loop frag. */ |
| fragS *targ_frag = next_non_empty_frag (fragP); |
| /* Find the first insn frag. */ |
| targ_frag = next_non_empty_frag (targ_frag); |
| |
| /* Of course, sometimes (mostly for toy test cases) a |
| zero-cost loop instruction is the last in a section. */ |
| if (targ_frag) |
| { |
| targ_frag->tc_frag_data.is_first_loop_insn = TRUE; |
| /* Do not widen a frag that is the first instruction of a |
| zero-cost loop. It makes that loop harder to align. */ |
| if (targ_frag->fr_type == rs_machine_dependent |
| && targ_frag->fr_subtype == RELAX_SLOTS |
| && (targ_frag->tc_frag_data.slot_subtypes[0] |
| == RELAX_NARROW)) |
| { |
| if (targ_frag->tc_frag_data.is_aligning_branch) |
| targ_frag->tc_frag_data.slot_subtypes[0] = RELAX_IMMED; |
| else |
| { |
| frag_wane (targ_frag); |
| targ_frag->tc_frag_data.slot_subtypes[0] = 0; |
| } |
| } |
| } |
| if (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE) |
| frag_wane (fragP); |
| } |
| } |
| } |
| } |
| |
| |
| /* Re-process all of the fragments looking to convert all of the |
| RELAX_ADD_NOP_IF_A0_B_RETW. If the next instruction is a |
| conditional branch or a retw/retw.n, convert this frag to one that |
| will generate a NOP. In any case close it off with a .fill 0. */ |
| |
| static bfd_boolean next_instrs_are_b_retw (fragS *); |
| |
| static void |
| xtensa_fix_a0_b_retw_frags (void) |
| { |
| frchainS *frchP; |
| |
| /* When this routine is called, all of the subsections are still intact |
| so we walk over subsections instead of sections. */ |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_ADD_NOP_IF_A0_B_RETW) |
| { |
| if (next_instrs_are_b_retw (fragP)) |
| { |
| if (fragP->tc_frag_data.is_no_transform) |
| as_bad (_("instruction sequence (write a0, branch, retw) may trigger hardware errata")); |
| else |
| relax_frag_add_nop (fragP); |
| } |
| frag_wane (fragP); |
| } |
| } |
| } |
| } |
| |
| |
| static bfd_boolean |
| next_instrs_are_b_retw (fragS *fragP) |
| { |
| xtensa_opcode opcode; |
| xtensa_format fmt; |
| const fragS *next_fragP = next_non_empty_frag (fragP); |
| static xtensa_insnbuf insnbuf = NULL; |
| static xtensa_insnbuf slotbuf = NULL; |
| xtensa_isa isa = xtensa_default_isa; |
| int offset = 0; |
| int slot; |
| bfd_boolean branch_seen = FALSE; |
| |
| if (!insnbuf) |
| { |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| } |
| |
| if (next_fragP == NULL) |
| return FALSE; |
| |
| /* Check for the conditional branch. */ |
| xtensa_insnbuf_from_chars |
| (isa, insnbuf, (unsigned char *) &next_fragP->fr_literal[offset], 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| if (fmt == XTENSA_UNDEFINED) |
| return FALSE; |
| |
| for (slot = 0; slot < xtensa_format_num_slots (isa, fmt); slot++) |
| { |
| xtensa_format_get_slot (isa, fmt, slot, insnbuf, slotbuf); |
| opcode = xtensa_opcode_decode (isa, fmt, slot, slotbuf); |
| |
| branch_seen = (branch_seen |
| || xtensa_opcode_is_branch (isa, opcode) == 1); |
| } |
| |
| if (!branch_seen) |
| return FALSE; |
| |
| offset += xtensa_format_length (isa, fmt); |
| if (offset == next_fragP->fr_fix) |
| { |
| next_fragP = next_non_empty_frag (next_fragP); |
| offset = 0; |
| } |
| |
| if (next_fragP == NULL) |
| return FALSE; |
| |
| /* Check for the retw/retw.n. */ |
| xtensa_insnbuf_from_chars |
| (isa, insnbuf, (unsigned char *) &next_fragP->fr_literal[offset], 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| |
| /* Because RETW[.N] is not bundleable, a VLIW bundle here means that we |
| have no problems. */ |
| if (fmt == XTENSA_UNDEFINED |
| || xtensa_format_num_slots (isa, fmt) != 1) |
| return FALSE; |
| |
| xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf); |
| opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf); |
| |
| if (opcode == xtensa_retw_opcode || opcode == xtensa_retw_n_opcode) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| |
| /* Re-process all of the fragments looking to convert all of the |
| RELAX_ADD_NOP_IF_PRE_LOOP_END. If there is one instruction and a |
| loop end label, convert this frag to one that will generate a NOP. |
| In any case close it off with a .fill 0. */ |
| |
| static bfd_boolean next_instr_is_loop_end (fragS *); |
| |
| static void |
| xtensa_fix_b_j_loop_end_frags (void) |
| { |
| frchainS *frchP; |
| |
| /* When this routine is called, all of the subsections are still intact |
| so we walk over subsections instead of sections. */ |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_ADD_NOP_IF_PRE_LOOP_END) |
| { |
| if (next_instr_is_loop_end (fragP)) |
| { |
| if (fragP->tc_frag_data.is_no_transform) |
| as_bad (_("branching or jumping to a loop end may trigger hardware errata")); |
| else |
| relax_frag_add_nop (fragP); |
| } |
| frag_wane (fragP); |
| } |
| } |
| } |
| } |
| |
| |
| static bfd_boolean |
| next_instr_is_loop_end (fragS *fragP) |
| { |
| const fragS *next_fragP; |
| |
| if (next_frag_is_loop_target (fragP)) |
| return FALSE; |
| |
| next_fragP = next_non_empty_frag (fragP); |
| if (next_fragP == NULL) |
| return FALSE; |
| |
| if (!next_frag_is_loop_target (next_fragP)) |
| return FALSE; |
| |
| /* If the size is >= 3 then there is more than one instruction here. |
| The hardware bug will not fire. */ |
| if (next_fragP->fr_fix > 3) |
| return FALSE; |
| |
| return TRUE; |
| } |
| |
| |
| /* Re-process all of the fragments looking to convert all of the |
| RELAX_ADD_NOP_IF_CLOSE_LOOP_END. If there is an loop end that is |
| not MY loop's loop end within 12 bytes, add enough nops here to |
| make it at least 12 bytes away. In any case close it off with a |
| .fill 0. */ |
| |
| static offsetT min_bytes_to_other_loop_end |
| (fragS *, fragS *, offsetT); |
| |
| static void |
| xtensa_fix_close_loop_end_frags (void) |
| { |
| frchainS *frchP; |
| |
| /* When this routine is called, all of the subsections are still intact |
| so we walk over subsections instead of sections. */ |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| |
| fragS *current_target = NULL; |
| |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && ((fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE) |
| || (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE))) |
| current_target = symbol_get_frag (fragP->fr_symbol); |
| |
| if (current_target |
| && fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_ADD_NOP_IF_CLOSE_LOOP_END) |
| { |
| offsetT min_bytes; |
| int bytes_added = 0; |
| |
| #define REQUIRED_LOOP_DIVIDING_BYTES 12 |
| /* Max out at 12. */ |
| min_bytes = min_bytes_to_other_loop_end |
| (fragP->fr_next, current_target, REQUIRED_LOOP_DIVIDING_BYTES); |
| |
| if (min_bytes < REQUIRED_LOOP_DIVIDING_BYTES) |
| { |
| if (fragP->tc_frag_data.is_no_transform) |
| as_bad (_("loop end too close to another loop end may trigger hardware errata")); |
| else |
| { |
| while (min_bytes + bytes_added |
| < REQUIRED_LOOP_DIVIDING_BYTES) |
| { |
| int length = 3; |
| |
| if (fragP->fr_var < length) |
| as_fatal (_("fr_var %lu < length %d"), |
| (long) fragP->fr_var, length); |
| else |
| { |
| assemble_nop (length, |
| fragP->fr_literal + fragP->fr_fix); |
| fragP->fr_fix += length; |
| fragP->fr_var -= length; |
| } |
| bytes_added += length; |
| } |
| } |
| } |
| frag_wane (fragP); |
| } |
| assert (fragP->fr_type != rs_machine_dependent |
| || fragP->fr_subtype != RELAX_ADD_NOP_IF_CLOSE_LOOP_END); |
| } |
| } |
| } |
| |
| |
| static offsetT unrelaxed_frag_min_size (fragS *); |
| |
| static offsetT |
| min_bytes_to_other_loop_end (fragS *fragP, |
| fragS *current_target, |
| offsetT max_size) |
| { |
| offsetT offset = 0; |
| fragS *current_fragP; |
| |
| for (current_fragP = fragP; |
| current_fragP; |
| current_fragP = current_fragP->fr_next) |
| { |
| if (current_fragP->tc_frag_data.is_loop_target |
| && current_fragP != current_target) |
| return offset; |
| |
| offset += unrelaxed_frag_min_size (current_fragP); |
| |
| if (offset >= max_size) |
| return max_size; |
| } |
| return max_size; |
| } |
| |
| |
| static offsetT |
| unrelaxed_frag_min_size (fragS *fragP) |
| { |
| offsetT size = fragP->fr_fix; |
| |
| /* Add fill size. */ |
| if (fragP->fr_type == rs_fill) |
| size += fragP->fr_offset; |
| |
| return size; |
| } |
| |
| |
| static offsetT |
| unrelaxed_frag_max_size (fragS *fragP) |
| { |
| offsetT size = fragP->fr_fix; |
| switch (fragP->fr_type) |
| { |
| case 0: |
| /* Empty frags created by the obstack allocation scheme |
| end up with type 0. */ |
| break; |
| case rs_fill: |
| case rs_org: |
| case rs_space: |
| size += fragP->fr_offset; |
| break; |
| case rs_align: |
| case rs_align_code: |
| case rs_align_test: |
| case rs_leb128: |
| case rs_cfa: |
| case rs_dwarf2dbg: |
| /* No further adjustments needed. */ |
| break; |
| case rs_machine_dependent: |
| if (fragP->fr_subtype != RELAX_DESIRE_ALIGN) |
| size += fragP->fr_var; |
| break; |
| default: |
| /* We had darn well better know how big it is. */ |
| assert (0); |
| break; |
| } |
| |
| return size; |
| } |
| |
| |
| /* Re-process all of the fragments looking to convert all |
| of the RELAX_ADD_NOP_IF_SHORT_LOOP. If: |
| |
| A) |
| 1) the instruction size count to the loop end label |
| is too short (<= 2 instructions), |
| 2) loop has a jump or branch in it |
| |
| or B) |
| 1) workaround_all_short_loops is TRUE |
| 2) The generating loop was a 'loopgtz' or 'loopnez' |
| 3) the instruction size count to the loop end label is too short |
| (<= 2 instructions) |
| then convert this frag (and maybe the next one) to generate a NOP. |
| In any case close it off with a .fill 0. */ |
| |
| static int count_insns_to_loop_end (fragS *, bfd_boolean, int); |
| static bfd_boolean branch_before_loop_end (fragS *); |
| |
| static void |
| xtensa_fix_short_loop_frags (void) |
| { |
| frchainS *frchP; |
| |
| /* When this routine is called, all of the subsections are still intact |
| so we walk over subsections instead of sections. */ |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| fragS *current_target = NULL; |
| xtensa_opcode current_opcode = XTENSA_UNDEFINED; |
| |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && ((fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE) |
| || (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE))) |
| { |
| TInsn t_insn; |
| fragS *loop_frag = next_non_empty_frag (fragP); |
| tinsn_from_chars (&t_insn, loop_frag->fr_opcode, 0); |
| current_target = symbol_get_frag (fragP->fr_symbol); |
| current_opcode = t_insn.opcode; |
| assert (xtensa_opcode_is_loop (xtensa_default_isa, |
| current_opcode)); |
| } |
| |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_ADD_NOP_IF_SHORT_LOOP) |
| { |
| if (count_insns_to_loop_end (fragP->fr_next, TRUE, 3) < 3 |
| && (branch_before_loop_end (fragP->fr_next) |
| || (workaround_all_short_loops |
| && current_opcode != XTENSA_UNDEFINED |
| && current_opcode != xtensa_loop_opcode))) |
| { |
| if (fragP->tc_frag_data.is_no_transform) |
| as_bad (_("loop containing less than three instructions may trigger hardware errata")); |
| else |
| relax_frag_add_nop (fragP); |
| } |
| frag_wane (fragP); |
| } |
| } |
| } |
| } |
| |
| |
| static int unrelaxed_frag_min_insn_count (fragS *); |
| |
| static int |
| count_insns_to_loop_end (fragS *base_fragP, |
| bfd_boolean count_relax_add, |
| int max_count) |
| { |
| fragS *fragP = NULL; |
| int insn_count = 0; |
| |
| fragP = base_fragP; |
| |
| for (; fragP && !fragP->tc_frag_data.is_loop_target; fragP = fragP->fr_next) |
| { |
| insn_count += unrelaxed_frag_min_insn_count (fragP); |
| if (insn_count >= max_count) |
| return max_count; |
| |
| if (count_relax_add) |
| { |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_ADD_NOP_IF_SHORT_LOOP) |
| { |
| /* In order to add the appropriate number of |
| NOPs, we count an instruction for downstream |
| occurrences. */ |
| insn_count++; |
| if (insn_count >= max_count) |
| return max_count; |
| } |
| } |
| } |
| return insn_count; |
| } |
| |
| |
| static int |
| unrelaxed_frag_min_insn_count (fragS *fragP) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| static xtensa_insnbuf insnbuf = NULL; |
| int insn_count = 0; |
| int offset = 0; |
| |
| if (!fragP->tc_frag_data.is_insn) |
| return insn_count; |
| |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| |
| /* Decode the fixed instructions. */ |
| while (offset < fragP->fr_fix) |
| { |
| xtensa_format fmt; |
| |
| xtensa_insnbuf_from_chars |
| (isa, insnbuf, (unsigned char *) fragP->fr_literal + offset, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| |
| if (fmt == XTENSA_UNDEFINED) |
| { |
| as_fatal (_("undecodable instruction in instruction frag")); |
| return insn_count; |
| } |
| offset += xtensa_format_length (isa, fmt); |
| insn_count++; |
| } |
| |
| return insn_count; |
| } |
| |
| |
| static bfd_boolean unrelaxed_frag_has_b_j (fragS *); |
| |
| static bfd_boolean |
| branch_before_loop_end (fragS *base_fragP) |
| { |
| fragS *fragP; |
| |
| for (fragP = base_fragP; |
| fragP && !fragP->tc_frag_data.is_loop_target; |
| fragP = fragP->fr_next) |
| { |
| if (unrelaxed_frag_has_b_j (fragP)) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| unrelaxed_frag_has_b_j (fragS *fragP) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| xtensa_isa isa = xtensa_default_isa; |
| int offset = 0; |
| |
| if (!fragP->tc_frag_data.is_insn) |
| return FALSE; |
| |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| |
| /* Decode the fixed instructions. */ |
| while (offset < fragP->fr_fix) |
| { |
| xtensa_format fmt; |
| int slot; |
| |
| xtensa_insnbuf_from_chars |
| (isa, insnbuf, (unsigned char *) fragP->fr_literal + offset, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| if (fmt == XTENSA_UNDEFINED) |
| return FALSE; |
| |
| for (slot = 0; slot < xtensa_format_num_slots (isa, fmt); slot++) |
| { |
| xtensa_opcode opcode = |
| get_opcode_from_buf (fragP->fr_literal + offset, slot); |
| if (xtensa_opcode_is_branch (isa, opcode) == 1 |
| || xtensa_opcode_is_jump (isa, opcode) == 1) |
| return TRUE; |
| } |
| offset += xtensa_format_length (isa, fmt); |
| } |
| return FALSE; |
| } |
| |
| |
| /* Checks to be made after initial assembly but before relaxation. */ |
| |
| static bfd_boolean is_empty_loop (const TInsn *, fragS *); |
| static bfd_boolean is_local_forward_loop (const TInsn *, fragS *); |
| |
| static void |
| xtensa_sanity_check (void) |
| { |
| char *file_name; |
| unsigned line; |
| |
| frchainS *frchP; |
| |
| as_where (&file_name, &line); |
| for (frchP = frchain_root; frchP; frchP = frchP->frch_next) |
| { |
| fragS *fragP; |
| |
| /* Walk over all of the fragments in a subsection. */ |
| for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| /* Currently we only check for empty loops here. */ |
| if (fragP->fr_type == rs_machine_dependent |
| && fragP->fr_subtype == RELAX_IMMED) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| TInsn t_insn; |
| |
| if (fragP->fr_opcode != NULL) |
| { |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (xtensa_default_isa); |
| tinsn_from_chars (&t_insn, fragP->fr_opcode, 0); |
| tinsn_immed_from_frag (&t_insn, fragP, 0); |
| |
| if (xtensa_opcode_is_loop (xtensa_default_isa, |
| t_insn.opcode) == 1) |
| { |
| if (is_empty_loop (&t_insn, fragP)) |
| { |
| new_logical_line (fragP->fr_file, fragP->fr_line); |
| as_bad (_("invalid empty loop")); |
| } |
| if (!is_local_forward_loop (&t_insn, fragP)) |
| { |
| new_logical_line (fragP->fr_file, fragP->fr_line); |
| as_bad (_("loop target does not follow " |
| "loop instruction in section")); |
| } |
| } |
| } |
| } |
| } |
| } |
| new_logical_line (file_name, line); |
| } |
| |
| |
| #define LOOP_IMMED_OPN 1 |
| |
| /* Return TRUE if the loop target is the next non-zero fragment. */ |
| |
| static bfd_boolean |
| is_empty_loop (const TInsn *insn, fragS *fragP) |
| { |
| const expressionS *expr; |
| symbolS *symbolP; |
| fragS *next_fragP; |
| |
| if (insn->insn_type != ITYPE_INSN) |
| return FALSE; |
| |
| if (xtensa_opcode_is_loop (xtensa_default_isa, insn->opcode) != 1) |
| return FALSE; |
| |
| if (insn->ntok <= LOOP_IMMED_OPN) |
| return FALSE; |
| |
| expr = &insn->tok[LOOP_IMMED_OPN]; |
| |
| if (expr->X_op != O_symbol) |
| return FALSE; |
| |
| symbolP = expr->X_add_symbol; |
| if (!symbolP) |
| return FALSE; |
| |
| if (symbol_get_frag (symbolP) == NULL) |
| return FALSE; |
| |
| if (S_GET_VALUE (symbolP) != 0) |
| return FALSE; |
| |
| /* Walk through the zero-size fragments from this one. If we find |
| the target fragment, then this is a zero-size loop. */ |
| |
| for (next_fragP = fragP->fr_next; |
| next_fragP != NULL; |
| next_fragP = next_fragP->fr_next) |
| { |
| if (next_fragP == symbol_get_frag (symbolP)) |
| return TRUE; |
| if (next_fragP->fr_fix != 0) |
| return FALSE; |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| is_local_forward_loop (const TInsn *insn, fragS *fragP) |
| { |
| const expressionS *expr; |
| symbolS *symbolP; |
| fragS *next_fragP; |
| |
| if (insn->insn_type != ITYPE_INSN) |
| return FALSE; |
| |
| if (xtensa_opcode_is_loop (xtensa_default_isa, insn->opcode) == 0) |
| return FALSE; |
| |
| if (insn->ntok <= LOOP_IMMED_OPN) |
| return FALSE; |
| |
| expr = &insn->tok[LOOP_IMMED_OPN]; |
| |
| if (expr->X_op != O_symbol) |
| return FALSE; |
| |
| symbolP = expr->X_add_symbol; |
| if (!symbolP) |
| return FALSE; |
| |
| if (symbol_get_frag (symbolP) == NULL) |
| return FALSE; |
| |
| /* Walk through fragments until we find the target. |
| If we do not find the target, then this is an invalid loop. */ |
| |
| for (next_fragP = fragP->fr_next; |
| next_fragP != NULL; |
| next_fragP = next_fragP->fr_next) |
| { |
| if (next_fragP == symbol_get_frag (symbolP)) |
| return TRUE; |
| } |
| |
| return FALSE; |
| } |
| |
| |
| /* Alignment Functions. */ |
| |
| static int |
| get_text_align_power (unsigned target_size) |
| { |
| if (target_size <= 4) |
| return 2; |
| assert (target_size == 8); |
| return 3; |
| } |
| |
| |
| static int |
| get_text_align_max_fill_size (int align_pow, |
| bfd_boolean use_nops, |
| bfd_boolean use_no_density) |
| { |
| if (!use_nops) |
| return (1 << align_pow); |
| if (use_no_density) |
| return 3 * (1 << align_pow); |
| |
| return 1 + (1 << align_pow); |
| } |
| |
| |
| /* Calculate the minimum bytes of fill needed at "address" to align a |
| target instruction of size "target_size" so that it does not cross a |
| power-of-two boundary specified by "align_pow". If "use_nops" is FALSE, |
| the fill can be an arbitrary number of bytes. Otherwise, the space must |
| be filled by NOP instructions. */ |
| |
| static int |
| get_text_align_fill_size (addressT address, |
| int align_pow, |
| int target_size, |
| bfd_boolean use_nops, |
| bfd_boolean use_no_density) |
| { |
| addressT alignment, fill, fill_limit, fill_step; |
| bfd_boolean skip_one = FALSE; |
| |
| alignment = (1 << align_pow); |
| assert (target_size > 0 && alignment >= (addressT) target_size); |
| |
| if (!use_nops) |
| { |
| fill_limit = alignment; |
| fill_step = 1; |
| } |
| else if (!use_no_density) |
| { |
| /* Combine 2- and 3-byte NOPs to fill anything larger than one. */ |
| fill_limit = alignment * 2; |
| fill_step = 1; |
| skip_one = TRUE; |
| } |
| else |
| { |
| /* Fill with 3-byte NOPs -- can only fill multiples of 3. */ |
| fill_limit = alignment * 3; |
| fill_step = 3; |
| } |
| |
| /* Try all fill sizes until finding one that works. */ |
| for (fill = 0; fill < fill_limit; fill += fill_step) |
| { |
| if (skip_one && fill == 1) |
| continue; |
| if ((address + fill) >> align_pow |
| == (address + fill + target_size - 1) >> align_pow) |
| return fill; |
| } |
| assert (0); |
| return 0; |
| } |
| |
| |
| static int |
| branch_align_power (segT sec) |
| { |
| /* If the Xtensa processor has a fetch width of 8 bytes, and the section |
| is aligned to at least an 8-byte boundary, then a branch target need |
| only fit within an 8-byte aligned block of memory to avoid a stall. |
| Otherwise, try to fit branch targets within 4-byte aligned blocks |
| (which may be insufficient, e.g., if the section has no alignment, but |
| it's good enough). */ |
| if (xtensa_fetch_width == 8) |
| { |
| if (get_recorded_alignment (sec) >= 3) |
| return 3; |
| } |
| else |
| assert (xtensa_fetch_width == 4); |
| |
| return 2; |
| } |
| |
| |
| /* This will assert if it is not possible. */ |
| |
| static int |
| get_text_align_nop_count (offsetT fill_size, bfd_boolean use_no_density) |
| { |
| int count = 0; |
| |
| if (use_no_density) |
| { |
| assert (fill_size % 3 == 0); |
| return (fill_size / 3); |
| } |
| |
| assert (fill_size != 1); /* Bad argument. */ |
| |
| while (fill_size > 1) |
| { |
| int insn_size = 3; |
| if (fill_size == 2 || fill_size == 4) |
| insn_size = 2; |
| fill_size -= insn_size; |
| count++; |
| } |
| assert (fill_size != 1); /* Bad algorithm. */ |
| return count; |
| } |
| |
| |
| static int |
| get_text_align_nth_nop_size (offsetT fill_size, |
| int n, |
| bfd_boolean use_no_density) |
| { |
| int count = 0; |
| |
| if (use_no_density) |
| return 3; |
| |
| assert (fill_size != 1); /* Bad argument. */ |
| |
| while (fill_size > 1) |
| { |
| int insn_size = 3; |
| if (fill_size == 2 || fill_size == 4) |
| insn_size = 2; |
| fill_size -= insn_size; |
| count++; |
| if (n + 1 == count) |
| return insn_size; |
| } |
| assert (0); |
| return 0; |
| } |
| |
| |
| /* For the given fragment, find the appropriate address |
| for it to begin at if we are using NOPs to align it. */ |
| |
| static addressT |
| get_noop_aligned_address (fragS *fragP, addressT address) |
| { |
| /* The rule is: get next fragment's FIRST instruction. Find |
| the smallest number of bytes that need to be added to |
| ensure that the next fragment's FIRST instruction will fit |
| in a single word. |
| |
| E.G., 2 bytes : 0, 1, 2 mod 4 |
| 3 bytes: 0, 1 mod 4 |
| |
| If the FIRST instruction MIGHT be relaxed, |
| assume that it will become a 3-byte instruction. |
| |
| Note again here that LOOP instructions are not bundleable, |
| and this relaxation only applies to LOOP opcodes. */ |
| |
| int fill_size = 0; |
| int first_insn_size; |
| int loop_insn_size; |
| addressT pre_opcode_bytes; |
| int align_power; |
| fragS *first_insn; |
| xtensa_opcode opcode; |
| bfd_boolean is_loop; |
| |
| assert (fragP->fr_type == rs_machine_dependent); |
| assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE); |
| |
| /* Find the loop frag. */ |
| first_insn = next_non_empty_frag (fragP); |
| /* Now find the first insn frag. */ |
| first_insn = next_non_empty_frag (first_insn); |
| |
| is_loop = next_frag_opcode_is_loop (fragP, &opcode); |
| assert (is_loop); |
| loop_insn_size = xg_get_single_size (opcode); |
| |
| pre_opcode_bytes = next_frag_pre_opcode_bytes (fragP); |
| pre_opcode_bytes += loop_insn_size; |
| |
| /* For loops, the alignment depends on the size of the |
| instruction following the loop, not the LOOP instruction. */ |
| |
| if (first_insn == NULL) |
| first_insn_size = xtensa_fetch_width; |
| else |
| first_insn_size = get_loop_align_size (frag_format_size (first_insn)); |
| |
| /* If it was 8, then we'll need a larger alignment for the section. */ |
| align_power = get_text_align_power (first_insn_size); |
| record_alignment (now_seg, align_power); |
| |
| fill_size = get_text_align_fill_size |
| (address + pre_opcode_bytes, align_power, first_insn_size, TRUE, |
| fragP->tc_frag_data.is_no_density); |
| |
| return address + fill_size; |
| } |
| |
| |
| /* 3 mechanisms for relaxing an alignment: |
| |
| Align to a power of 2. |
| Align so the next fragment's instruction does not cross a word boundary. |
| Align the current instruction so that if the next instruction |
| were 3 bytes, it would not cross a word boundary. |
| |
| We can align with: |
| |
| zeros - This is easy; always insert zeros. |
| nops - 3-byte and 2-byte instructions |
| 2 - 2-byte nop |
| 3 - 3-byte nop |
| 4 - 2 2-byte nops |
| >=5 : 3-byte instruction + fn (n-3) |
| widening - widen previous instructions. */ |
| |
| static offsetT |
| get_aligned_diff (fragS *fragP, addressT address, offsetT *max_diff) |
| { |
| addressT target_address, loop_insn_offset; |
| int target_size; |
| xtensa_opcode loop_opcode; |
| bfd_boolean is_loop; |
| int align_power; |
| offsetT opt_diff; |
| offsetT branch_align; |
| |
| assert (fragP->fr_type == rs_machine_dependent); |
| switch (fragP->fr_subtype) |
| { |
| case RELAX_DESIRE_ALIGN: |
| target_size = next_frag_format_size (fragP); |
| if (target_size == XTENSA_UNDEFINED) |
| target_size = 3; |
| align_power = branch_align_power (now_seg); |
| branch_align = 1 << align_power; |
| /* Don't count on the section alignment being as large as the target. */ |
| if (target_size > branch_align) |
| target_size = branch_align; |
| opt_diff = get_text_align_fill_size (address, align_power, |
| target_size, FALSE, FALSE); |
| |
| *max_diff = (opt_diff + branch_align |
| - (target_size + ((address + opt_diff) % branch_align))); |
| assert (*max_diff >= opt_diff); |
| return opt_diff; |
| |
| case RELAX_ALIGN_NEXT_OPCODE: |
| target_size = get_loop_align_size (next_frag_format_size (fragP)); |
| loop_insn_offset = 0; |
| is_loop = next_frag_opcode_is_loop (fragP, &loop_opcode); |
| assert (is_loop); |
| |
| /* If the loop has been expanded then the LOOP instruction |
| could be at an offset from this fragment. */ |
| if (next_non_empty_frag(fragP)->tc_frag_data.slot_subtypes[0] |
| != RELAX_IMMED) |
| loop_insn_offset = get_expanded_loop_offset (loop_opcode); |
| |
| /* In an ideal world, which is what we are shooting for here, |
| we wouldn't need to use any NOPs immediately prior to the |
| LOOP instruction. If this approach fails, relax_frag_loop_align |
| will call get_noop_aligned_address. */ |
| target_address = |
| address + loop_insn_offset + xg_get_single_size (loop_opcode); |
| align_power = get_text_align_power (target_size), |
| opt_diff = get_text_align_fill_size (target_address, align_power, |
| target_size, FALSE, FALSE); |
| |
| *max_diff = xtensa_fetch_width |
| - ((target_address + opt_diff) % xtensa_fetch_width) |
| - target_size + opt_diff; |
| assert (*max_diff >= opt_diff); |
| return opt_diff; |
| |
| default: |
| break; |
| } |
| assert (0); |
| return 0; |
| } |
| |
| |
| /* md_relax_frag Hook and Helper Functions. */ |
| |
| static long relax_frag_loop_align (fragS *, long); |
| static long relax_frag_for_align (fragS *, long); |
| static long relax_frag_immed |
| (segT, fragS *, long, int, xtensa_format, int, int *, bfd_boolean); |
| |
| |
| /* Return the number of bytes added to this fragment, given that the |
| input has been stretched already by "stretch". */ |
| |
| long |
| xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int unreported = fragP->tc_frag_data.unreported_expansion; |
| long new_stretch = 0; |
| char *file_name; |
| unsigned line; |
| int lit_size; |
| static xtensa_insnbuf vbuf = NULL; |
| int slot, num_slots; |
| xtensa_format fmt; |
| |
| as_where (&file_name, &line); |
| new_logical_line (fragP->fr_file, fragP->fr_line); |
| |
| fragP->tc_frag_data.unreported_expansion = 0; |
| |
| switch (fragP->fr_subtype) |
| { |
| case RELAX_ALIGN_NEXT_OPCODE: |
| /* Always convert. */ |
| if (fragP->tc_frag_data.relax_seen) |
| new_stretch = relax_frag_loop_align (fragP, stretch); |
| break; |
| |
| case RELAX_LOOP_END: |
| /* Do nothing. */ |
| break; |
| |
| case RELAX_LOOP_END_ADD_NOP: |
| /* Add a NOP and switch to .fill 0. */ |
| new_stretch = relax_frag_add_nop (fragP); |
| frag_wane (fragP); |
| break; |
| |
| case RELAX_DESIRE_ALIGN: |
| /* Do nothing. The narrowing before this frag will either align |
| it or not. */ |
| break; |
| |
| case RELAX_LITERAL: |
| case RELAX_LITERAL_FINAL: |
| return 0; |
| |
| case RELAX_LITERAL_NR: |
| lit_size = 4; |
| fragP->fr_subtype = RELAX_LITERAL_FINAL; |
| assert (unreported == lit_size); |
| memset (&fragP->fr_literal[fragP->fr_fix], 0, 4); |
| fragP->fr_var -= lit_size; |
| fragP->fr_fix += lit_size; |
| new_stretch = 4; |
| break; |
| |
| case RELAX_SLOTS: |
| if (vbuf == NULL) |
| vbuf = xtensa_insnbuf_alloc (isa); |
| |
| xtensa_insnbuf_from_chars |
| (isa, vbuf, (unsigned char *) fragP->fr_opcode, 0); |
| fmt = xtensa_format_decode (isa, vbuf); |
| num_slots = xtensa_format_num_slots (isa, fmt); |
| |
| for (slot = 0; slot < num_slots; slot++) |
| { |
| switch (fragP->tc_frag_data.slot_subtypes[slot]) |
| { |
| case RELAX_NARROW: |
| if (fragP->tc_frag_data.relax_seen) |
| new_stretch += relax_frag_for_align (fragP, stretch); |
| break; |
| |
| case RELAX_IMMED: |
| case RELAX_IMMED_STEP1: |
| case RELAX_IMMED_STEP2: |
| /* Place the immediate. */ |
| new_stretch += relax_frag_immed |
| (now_seg, fragP, stretch, |
| fragP->tc_frag_data.slot_subtypes[slot] - RELAX_IMMED, |
| fmt, slot, stretched_p, FALSE); |
| break; |
| |
| default: |
| /* This is OK; see the note in xg_assemble_vliw_tokens. */ |
| break; |
| } |
| } |
| break; |
| |
| case RELAX_LITERAL_POOL_BEGIN: |
| case RELAX_LITERAL_POOL_END: |
| case RELAX_MAYBE_UNREACHABLE: |
| case RELAX_MAYBE_DESIRE_ALIGN: |
| /* No relaxation required. */ |
| break; |
| |
| case RELAX_FILL_NOP: |
| case RELAX_UNREACHABLE: |
| if (fragP->tc_frag_data.relax_seen) |
| new_stretch += relax_frag_for_align (fragP, stretch); |
| break; |
| |
| default: |
| as_bad (_("bad relaxation state")); |
| } |
| |
| /* Tell gas we need another relaxation pass. */ |
| if (! fragP->tc_frag_data.relax_seen) |
| { |
| fragP->tc_frag_data.relax_seen = TRUE; |
| *stretched_p = 1; |
| } |
| |
| new_logical_line (file_name, line); |
| return new_stretch; |
| } |
| |
| |
| static long |
| relax_frag_loop_align (fragS *fragP, long stretch) |
| { |
| addressT old_address, old_next_address, old_size; |
| addressT new_address, new_next_address, new_size; |
| addressT growth; |
| |
| /* All the frags with relax_frag_for_alignment prior to this one in the |
| section have been done, hopefully eliminating the need for a NOP here. |
| But, this will put it in if necessary. */ |
| |
| /* Calculate the old address of this fragment and the next fragment. */ |
| old_address = fragP->fr_address - stretch; |
| old_next_address = (fragP->fr_address - stretch + fragP->fr_fix + |
| fragP->tc_frag_data.text_expansion[0]); |
| old_size = old_next_address - old_address; |
| |
| /* Calculate the new address of this fragment and the next fragment. */ |
| new_address = fragP->fr_address; |
| new_next_address = |
| get_noop_aligned_address (fragP, fragP->fr_address + fragP->fr_fix); |
| new_size = new_next_address - new_address; |
| |
| growth = new_size - old_size; |
| |
| /* Fix up the text_expansion field and return the new growth. */ |
| fragP->tc_frag_data.text_expansion[0] += growth; |
| return growth; |
| } |
| |
| |
| /* Add a NOP instruction. */ |
| |
| static long |
| relax_frag_add_nop (fragS *fragP) |
| { |
| char *nop_buf = fragP->fr_literal + fragP->fr_fix; |
| int length = fragP->tc_frag_data.is_no_density ? 3 : 2; |
| assemble_nop (length, nop_buf); |
| fragP->tc_frag_data.is_insn = TRUE; |
| |
| if (fragP->fr_var < length) |
| { |
| as_fatal (_("fr_var (%ld) < length (%d)"), (long) fragP->fr_var, length); |
| return 0; |
| } |
| |
| fragP->fr_fix += length; |
| fragP->fr_var -= length; |
| return length; |
| } |
| |
| |
| static long future_alignment_required (fragS *, long); |
| |
| static long |
| relax_frag_for_align (fragS *fragP, long stretch) |
| { |
| /* Overview of the relaxation procedure for alignment: |
| We can widen with NOPs or by widening instructions or by filling |
| bytes after jump instructions. Find the opportune places and widen |
| them if necessary. */ |
| |
| long stretch_me; |
| long diff; |
| |
| assert (fragP->fr_subtype == RELAX_FILL_NOP |
| || fragP->fr_subtype == RELAX_UNREACHABLE |
| || (fragP->fr_subtype == RELAX_SLOTS |
| && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)); |
| |
| stretch_me = future_alignment_required (fragP, stretch); |
| diff = stretch_me - fragP->tc_frag_data.text_expansion[0]; |
| if (diff == 0) |
| return 0; |
| |
| if (diff < 0) |
| { |
| /* We expanded on a previous pass. Can we shrink now? */ |
| long shrink = fragP->tc_frag_data.text_expansion[0] - stretch_me; |
| if (shrink <= stretch && stretch > 0) |
| { |
| fragP->tc_frag_data.text_expansion[0] = stretch_me; |
| return -shrink; |
| } |
| return 0; |
| } |
| |
| /* Below here, diff > 0. */ |
| fragP->tc_frag_data.text_expansion[0] = stretch_me; |
| |
| return diff; |
| } |
| |
| |
| /* Return the address of the next frag that should be aligned. |
| |
| By "address" we mean the address it _would_ be at if there |
| is no action taken to align it between here and the target frag. |
| In other words, if no narrows and no fill nops are used between |
| here and the frag to align, _even_if_ some of the frags we use |
| to align targets have already expanded on a previous relaxation |
| pass. |
| |
| Also, count each frag that may be used to help align the target. |
| |
| Return 0 if there are no frags left in the chain that need to be |
| aligned. */ |
| |
| static addressT |
| find_address_of_next_align_frag (fragS **fragPP, |
| int *wide_nops, |
| int *narrow_nops, |
| int *widens, |
| bfd_boolean *paddable) |
| { |
| fragS *fragP = *fragPP; |
| addressT address = fragP->fr_address; |
| |
| /* Do not reset the counts to 0. */ |
| |
| while (fragP) |
| { |
| /* Limit this to a small search. */ |
| if (*widens >= (int) xtensa_fetch_width) |
| { |
| *fragPP = fragP; |
| return 0; |
| } |
| address += fragP->fr_fix; |
| |
| if (fragP->fr_type == rs_fill) |
| address += fragP->fr_offset * fragP->fr_var; |
| else if (fragP->fr_type == rs_machine_dependent) |
| { |
| switch (fragP->fr_subtype) |
| { |
| case RELAX_UNREACHABLE: |
| *paddable = TRUE; |
| break; |
| |
| case RELAX_FILL_NOP: |
| (*wide_nops)++; |
| if (!fragP->tc_frag_data.is_no_density) |
| (*narrow_nops)++; |
| break; |
| |
| case RELAX_SLOTS: |
| if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW) |
| { |
| (*widens)++; |
| break; |
| } |
| address += total_frag_text_expansion (fragP);; |
| break; |
| |
| case RELAX_IMMED: |
| address += fragP->tc_frag_data.text_expansion[0]; |
| break; |
| |
| case RELAX_ALIGN_NEXT_OPCODE: |
| case RELAX_DESIRE_ALIGN: |
| *fragPP = fragP; |
| return address; |
| |
| case RELAX_MAYBE_UNREACHABLE: |
| case RELAX_MAYBE_DESIRE_ALIGN: |
| /* Do nothing. */ |
| break; |
| |
| default: |
| /* Just punt if we don't know the type. */ |
| *fragPP = fragP; |
| return 0; |
| } |
| } |
| else |
| { |
| /* Just punt if we don't know the type. */ |
| *fragPP = fragP; |
| return 0; |
| } |
| fragP = fragP->fr_next; |
| } |
| |
| *fragPP = fragP; |
| return 0; |
| } |
| |
| |
| static long bytes_to_stretch (fragS *, int, int, int, int); |
| |
| static long |
| future_alignment_required (fragS *fragP, long stretch ATTRIBUTE_UNUSED) |
| { |
| fragS *this_frag = fragP; |
| long address; |
| int num_widens = 0; |
| int wide_nops = 0; |
| int narrow_nops = 0; |
| bfd_boolean paddable = FALSE; |
| offsetT local_opt_diff; |
| offsetT opt_diff; |
| offsetT max_diff; |
| int stretch_amount = 0; |
| int local_stretch_amount; |
| int global_stretch_amount; |
| |
| address = find_address_of_next_align_frag |
| (&fragP, &wide_nops, &narrow_nops, &num_widens, &paddable); |
| |
| if (!address) |
| { |
| if (this_frag->tc_frag_data.is_aligning_branch) |
| this_frag->tc_frag_data.slot_subtypes[0] = RELAX_IMMED; |
| else |
| frag_wane (this_frag); |
| } |
| else |
| { |
| local_opt_diff = get_aligned_diff (fragP, address, &max_diff); |
| opt_diff = local_opt_diff; |
| assert (opt_diff >= 0); |
| assert (max_diff >= opt_diff); |
| if (max_diff == 0) |
| return 0; |
| |
| if (fragP) |
| fragP = fragP->fr_next; |
| |
| while (fragP && opt_diff < max_diff && address) |
| { |
| /* We only use these to determine if we can exit early |
| because there will be plenty of ways to align future |
| align frags. */ |
| int glob_widens = 0; |
| int dnn = 0; |
| int dw = 0; |
| bfd_boolean glob_pad = 0; |
| address = find_address_of_next_align_frag |
| (&fragP, &glob_widens, &dnn, &dw, &glob_pad); |
| /* If there is a padable portion, then skip. */ |
| if (glob_pad || glob_widens >= (1 << branch_align_power (now_seg))) |
| address = 0; |
| |
| if (address) |
| { |
| offsetT next_m_diff; |
| offsetT next_o_diff; |
| |
| /* Downrange frags haven't had stretch added to them yet. */ |
| address += stretch; |
| |
| /* The address also includes any text expansion from this |
| frag in a previous pass, but we don't want that. */ |
| address -= this_frag->tc_frag_data.text_expansion[0]; |
| |
| /* Assume we are going to move at least opt_diff. In |
| reality, we might not be able to, but assuming that |
| we will helps catch cases where moving opt_diff pushes |
| the next target from aligned to unaligned. */ |
| address += opt_diff; |
| |
| next_o_diff = get_aligned_diff (fragP, address, &next_m_diff); |
| |
| /* Now cleanup for the adjustments to address. */ |
| next_o_diff += opt_diff; |
| next_m_diff += opt_diff; |
| if (next_o_diff <= max_diff && next_o_diff > opt_diff) |
| opt_diff = next_o_diff; |
| if (next_m_diff < max_diff) |
| max_diff = next_m_diff; |
| fragP = fragP->fr_next; |
| } |
| } |
| |
| /* If there are enough wideners in between, do it. */ |
| if (paddable) |
| { |
| if (this_frag->fr_subtype == RELAX_UNREACHABLE) |
| { |
| assert (opt_diff <= UNREACHABLE_MAX_WIDTH); |
| return opt_diff; |
| } |
| return 0; |
| } |
| local_stretch_amount |
| = bytes_to_stretch (this_frag, wide_nops, narrow_nops, |
| num_widens, local_opt_diff); |
| global_stretch_amount |
| = bytes_to_stretch (this_frag, wide_nops, narrow_nops, |
| num_widens, opt_diff); |
| /* If the condition below is true, then the frag couldn't |
| stretch the correct amount for the global case, so we just |
| optimize locally. We'll rely on the subsequent frags to get |
| the correct alignment in the global case. */ |
| if (global_stretch_amount < local_stretch_amount) |
| stretch_amount = local_stretch_amount; |
| else |
| stretch_amount = global_stretch_amount; |
| |
| if (this_frag->fr_subtype == RELAX_SLOTS |
| && this_frag->tc_frag_data.slot_subtypes[0] == RELAX_NARROW) |
| assert (stretch_amount <= 1); |
| else if (this_frag->fr_subtype == RELAX_FILL_NOP) |
| { |
| if (this_frag->tc_frag_data.is_no_density) |
| assert (stretch_amount == 3 || stretch_amount == 0); |
| else |
| assert (stretch_amount <= 3); |
| } |
| } |
| return stretch_amount; |
| } |
| |
| |
| /* The idea: widen everything you can to get a target or loop aligned, |
| then start using NOPs. |
| |
| When we must have a NOP, here is a table of how we decide |
| (so you don't have to fight through the control flow below): |
| |
| wide_nops = the number of wide NOPs available for aligning |
| narrow_nops = the number of narrow NOPs available for aligning |
| (a subset of wide_nops) |
| widens = the number of narrow instructions that should be widened |
| |
| Desired wide narrow |
| Diff nop nop widens |
| 1 0 0 1 |
| 2 0 1 0 |
| 3a 1 0 0 |
| b 0 1 1 (case 3a makes this case unnecessary) |
| 4a 1 0 1 |
| b 0 2 0 |
| c 0 1 2 (case 4a makes this case unnecessary) |
| 5a 1 0 2 |
| b 1 1 0 |
| c 0 2 1 (case 5b makes this case unnecessary) |
| 6a 2 0 0 |
| b 1 0 3 |
| c 0 1 4 (case 6b makes this case unneccesary) |
| d 1 1 1 (case 6a makes this case unnecessary) |
| e 0 2 2 (case 6a makes this case unnecessary) |
| f 0 3 0 (case 6a makes this case unnecessary) |
| 7a 1 0 4 |
| b 2 0 1 |
| c 1 1 2 (case 7b makes this case unnecessary) |
| d 0 1 5 (case 7a makes this case unnecessary) |
| e 0 2 3 (case 7b makes this case unnecessary) |
| f 0 3 1 (case 7b makes this case unnecessary) |
| g 1 2 1 (case 7b makes this case unnecessary) |
| */ |
| |
| static long |
| bytes_to_stretch (fragS *this_frag, |
| int wide_nops, |
| int narrow_nops, |
| int num_widens, |
| int desired_diff) |
| { |
| int bytes_short = desired_diff - num_widens; |
| |
| assert (desired_diff >= 0 && desired_diff < 8); |
| if (desired_diff == 0) |
| return 0; |
| |
| assert (wide_nops > 0 || num_widens > 0); |
| |
| /* Always prefer widening to NOP-filling. */ |
| if (bytes_short < 0) |
| { |
| /* There are enough RELAX_NARROW frags after this one |
| to align the target without widening this frag in any way. */ |
| return 0; |
| } |
| |
| if (bytes_short == 0) |
| { |
| /* Widen every narrow between here and the align target |
| and the align target will be properly aligned. */ |
| if (this_frag->fr_subtype == RELAX_FILL_NOP) |
| return 0; |
| else |
| return 1; |
| } |
| |
| /* From here we will need at least one NOP to get an alignment. |
| However, we may not be able to align at all, in which case, |
| don't widen. */ |
| if (this_frag->fr_subtype == RELAX_FILL_NOP) |
| { |
| switch (desired_diff) |
| { |
| case 1: |
| return 0; |
| case 2: |
| if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 1) |
| return 2; /* case 2 */ |
| return 0; |
| case 3: |
| if (wide_nops > 1) |
| return 0; |
| else |
| return 3; /* case 3a */ |
| case 4: |
| if (num_widens >= 1 && wide_nops == 1) |
| return 3; /* case 4a */ |
| if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 2) |
| return 2; /* case 4b */ |
| return 0; |
| case 5: |
| if (num_widens >= 2 && wide_nops == 1) |
| return 3; /* case 5a */ |
| /* We will need two nops. Are there enough nops |
| between here and the align target? */ |
| if (wide_nops < 2 || narrow_nops == 0) |
| return 0; |
| /* Are there other nops closer that can serve instead? */ |
| if (wide_nops > 2 && narrow_nops > 1) |
| return 0; |
| /* Take the density one first, because there might not be |
| another density one available. */ |
| if (!this_frag->tc_frag_data.is_no_density) |
| return 2; /* case 5b narrow */ |
| else |
| return 3; /* case 5b wide */ |
| return 0; |
| case 6: |
| if (wide_nops == 2) |
| return 3; /* case 6a */ |
| else if (num_widens >= 3 && wide_nops == 1) |
| return 3; /* case 6b */ |
| return 0; |
| case 7: |
| if (wide_nops == 1 && num_widens >= 4) |
| return 3; /* case 7a */ |
| else if (wide_nops == 2 && num_widens >= 1) |
| return 3; /* case 7b */ |
| return 0; |
| default: |
| assert (0); |
| } |
| } |
| else |
| { |
| /* We will need a NOP no matter what, but should we widen |
| this instruction to help? |
| |
| This is a RELAX_NARROW frag. */ |
| switch (desired_diff) |
| { |
| case 1: |
| assert (0); |
| return 0; |
| case 2: |
| case 3: |
| return 0; |
| case 4: |
| if (wide_nops >= 1 && num_widens == 1) |
| return 1; /* case 4a */ |
| return 0; |
| case 5: |
| if (wide_nops >= 1 && num_widens == 2) |
| return 1; /* case 5a */ |
| return 0; |
| case 6: |
| if (wide_nops >= 2) |
| return 0; /* case 6a */ |
| else if (wide_nops >= 1 && num_widens == 3) |
| return 1; /* case 6b */ |
| return 0; |
| case 7: |
| if (wide_nops >= 1 && num_widens == 4) |
| return 1; /* case 7a */ |
| else if (wide_nops >= 2 && num_widens == 1) |
| return 1; /* case 7b */ |
| return 0; |
| default: |
| assert (0); |
| return 0; |
| } |
| } |
| assert (0); |
| return 0; |
| } |
| |
| |
| static long |
| relax_frag_immed (segT segP, |
| fragS *fragP, |
| long stretch, |
| int min_steps, |
| xtensa_format fmt, |
| int slot, |
| int *stretched_p, |
| bfd_boolean estimate_only) |
| { |
| TInsn tinsn; |
| int old_size; |
| bfd_boolean negatable_branch = FALSE; |
| bfd_boolean branch_jmp_to_next = FALSE; |
| bfd_boolean wide_insn = FALSE; |
| xtensa_isa isa = xtensa_default_isa; |
| IStack istack; |
| offsetT frag_offset; |
| int num_steps; |
| fragS *lit_fragP; |
| int num_text_bytes, num_literal_bytes; |
| int literal_diff, total_text_diff, this_text_diff, first; |
| |
| assert (fragP->fr_opcode != NULL); |
| |
| xg_clear_vinsn (&cur_vinsn); |
| vinsn_from_chars (&cur_vinsn, fragP->fr_opcode); |
| if (cur_vinsn.num_slots > 1) |
| wide_insn = TRUE; |
| |
| tinsn = cur_vinsn.slots[slot]; |
| tinsn_immed_from_frag (&tinsn, fragP, slot); |
| |
| if (estimate_only && xtensa_opcode_is_loop (isa, tinsn.opcode)) |
| return 0; |
| |
| if (workaround_b_j_loop_end && ! fragP->tc_frag_data.is_no_transform) |
| branch_jmp_to_next = is_branch_jmp_to_next (&tinsn, fragP); |
| |
| negatable_branch = (xtensa_opcode_is_branch (isa, tinsn.opcode) == 1); |
| |
| old_size = xtensa_format_length (isa, fmt); |
| |
| /* Special case: replace a branch to the next instruction with a NOP. |
| This is required to work around a hardware bug in T1040.0 and also |
| serves as an optimization. */ |
| |
| if (branch_jmp_to_next |
| && ((old_size == 2) || (old_size == 3)) |
| && !next_frag_is_loop_target (fragP)) |
| return 0; |
| |
| /* Here is the fun stuff: Get the immediate field from this |
| instruction. If it fits, we are done. If not, find the next |
| instruction sequence that fits. */ |
| |
| frag_offset = fragP->fr_opcode - fragP->fr_literal; |
| istack_init (&istack); |
| num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, frag_offset, |
| min_steps, stretch); |
| if (num_steps < min_steps) |
| { |
| as_fatal (_("internal error: relaxation failed")); |
| return 0; |
| } |
| |
| if (num_steps > RELAX_IMMED_MAXSTEPS) |
| { |
| as_fatal (_("internal error: relaxation requires too many steps")); |
| return 0; |
| } |
| |
| fragP->tc_frag_data.slot_subtypes[slot] = (int) RELAX_IMMED + num_steps; |
| |
| /* Figure out the number of bytes needed. */ |
| lit_fragP = 0; |
| num_literal_bytes = get_num_stack_literal_bytes (&istack); |
| literal_diff = |
| num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot]; |
| first = 0; |
| while (istack.insn[first].opcode == XTENSA_UNDEFINED) |
| first++; |
| num_text_bytes = get_num_stack_text_bytes (&istack); |
| if (wide_insn) |
| { |
| num_text_bytes += old_size; |
| if (opcode_fits_format_slot (istack.insn[first].opcode, fmt, slot)) |
| num_text_bytes -= xg_get_single_size (istack.insn[first].opcode); |
| } |
| total_text_diff = num_text_bytes - old_size; |
| this_text_diff = total_text_diff - fragP->tc_frag_data.text_expansion[slot]; |
| |
| /* It MUST get larger. If not, we could get an infinite loop. */ |
| assert (num_text_bytes >= 0); |
| assert (literal_diff >= 0); |
| assert (total_text_diff >= 0); |
| |
| fragP->tc_frag_data.text_expansion[slot] = total_text_diff; |
| fragP->tc_frag_data.literal_expansion[slot] = num_literal_bytes; |
| assert (fragP->tc_frag_data.text_expansion[slot] >= 0); |
| assert (fragP->tc_frag_data.literal_expansion[slot] >= 0); |
| |
| /* Find the associated expandable literal for this. */ |
| if (literal_diff != 0) |
| { |
| lit_fragP = fragP->tc_frag_data.literal_frags[slot]; |
| if (lit_fragP) |
| { |
| assert (literal_diff == 4); |
| lit_fragP->tc_frag_data.unreported_expansion += literal_diff; |
| |
| /* We expect that the literal section state has NOT been |
| modified yet. */ |
| assert (lit_fragP->fr_type == rs_machine_dependent |
| && lit_fragP->fr_subtype == RELAX_LITERAL); |
| lit_fragP->fr_subtype = RELAX_LITERAL_NR; |
| |
| /* We need to mark this section for another iteration |
| of relaxation. */ |
| (*stretched_p)++; |
| } |
| } |
| |
| if (negatable_branch && istack.ninsn > 1) |
| update_next_frag_state (fragP); |
| |
| return this_text_diff; |
| } |
| |
| |
| /* md_convert_frag Hook and Helper Functions. */ |
| |
| static void convert_frag_align_next_opcode (fragS *); |
| static void convert_frag_narrow (segT, fragS *, xtensa_format, int); |
| static void convert_frag_fill_nop (fragS *); |
| static void convert_frag_immed (segT, fragS *, int, xtensa_format, int); |
| |
| void |
| md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT sec, fragS *fragp) |
| { |
| static xtensa_insnbuf vbuf = NULL; |
| xtensa_isa isa = xtensa_default_isa; |
| int slot; |
| int num_slots; |
| xtensa_format fmt; |
| char *file_name; |
| unsigned line; |
| |
| as_where (&file_name, &line); |
| new_logical_line (fragp->fr_file, fragp->fr_line); |
| |
| switch (fragp->fr_subtype) |
| { |
| case RELAX_ALIGN_NEXT_OPCODE: |
| /* Always convert. */ |
| convert_frag_align_next_opcode (fragp); |
| break; |
| |
| case RELAX_DESIRE_ALIGN: |
| /* Do nothing. If not aligned already, too bad. */ |
| break; |
| |
| case RELAX_LITERAL: |
| case RELAX_LITERAL_FINAL: |
| break; |
| |
| case RELAX_SLOTS: |
| if (vbuf == NULL) |
| vbuf = xtensa_insnbuf_alloc (isa); |
| |
| xtensa_insnbuf_from_chars |
| (isa, vbuf, (unsigned char *) fragp->fr_opcode, 0); |
| fmt = xtensa_format_decode (isa, vbuf); |
| num_slots = xtensa_format_num_slots (isa, fmt); |
| |
| for (slot = 0; slot < num_slots; slot++) |
| { |
| switch (fragp->tc_frag_data.slot_subtypes[slot]) |
| { |
| case RELAX_NARROW: |
| convert_frag_narrow (sec, fragp, fmt, slot); |
| break; |
| |
| case RELAX_IMMED: |
| case RELAX_IMMED_STEP1: |
| case RELAX_IMMED_STEP2: |
| /* Place the immediate. */ |
| convert_frag_immed |
| (sec, fragp, |
| fragp->tc_frag_data.slot_subtypes[slot] - RELAX_IMMED, |
| fmt, slot); |
| break; |
| |
| default: |
| /* This is OK because some slots could have |
| relaxations and others have none. */ |
| break; |
| } |
| } |
| break; |
| |
| case RELAX_UNREACHABLE: |
| memset (&fragp->fr_literal[fragp->fr_fix], 0, fragp->fr_var); |
| fragp->fr_fix += fragp->tc_frag_data.text_expansion[0]; |
| fragp->fr_var -= fragp->tc_frag_data.text_expansion[0]; |
| frag_wane (fragp); |
| break; |
| |
| case RELAX_MAYBE_UNREACHABLE: |
| case RELAX_MAYBE_DESIRE_ALIGN: |
| frag_wane (fragp); |
| break; |
| |
| case RELAX_FILL_NOP: |
| convert_frag_fill_nop (fragp); |
| break; |
| |
| case RELAX_LITERAL_NR: |
| if (use_literal_section) |
| { |
| /* This should have been handled during relaxation. When |
| relaxing a code segment, literals sometimes need to be |
| added to the corresponding literal segment. If that |
| literal segment has already been relaxed, then we end up |
| in this situation. Marking the literal segments as data |
| would make this happen less often (since GAS always relaxes |
| code before data), but we could still get into trouble if |
| there are instructions in a segment that is not marked as |
| containing code. Until we can implement a better solution, |
| cheat and adjust the addresses of all the following frags. |
| This could break subsequent alignments, but the linker's |
| literal coalescing will do that anyway. */ |
| |
| fragS *f; |
| fragp->fr_subtype = RELAX_LITERAL_FINAL; |
| assert (fragp->tc_frag_data.unreported_expansion == 4); |
| memset (&fragp->fr_literal[fragp->fr_fix], 0, 4); |
| fragp->fr_var -= 4; |
| fragp->fr_fix += 4; |
| for (f = fragp->fr_next; f; f = f->fr_next) |
| f->fr_address += 4; |
| } |
| else |
| as_bad (_("invalid relaxation fragment result")); |
| break; |
| } |
| |
| fragp->fr_var = 0; |
| new_logical_line (file_name, line); |
| } |
| |
| |
| static void |
| convert_frag_align_next_opcode (fragS *fragp) |
| { |
| char *nop_buf; /* Location for Writing. */ |
| bfd_boolean use_no_density = fragp->tc_frag_data.is_no_density; |
| addressT aligned_address; |
| offsetT fill_size; |
| int nop, nop_count; |
| |
| aligned_address = get_noop_aligned_address (fragp, fragp->fr_address + |
| fragp->fr_fix); |
| fill_size = aligned_address - (fragp->fr_address + fragp->fr_fix); |
| nop_count = get_text_align_nop_count (fill_size, use_no_density); |
| nop_buf = fragp->fr_literal + fragp->fr_fix; |
| |
| for (nop = 0; nop < nop_count; nop++) |
| { |
| int nop_size; |
| nop_size = get_text_align_nth_nop_size (fill_size, nop, use_no_density); |
| |
| assemble_nop (nop_size, nop_buf); |
| nop_buf += nop_size; |
| } |
| |
| fragp->fr_fix += fill_size; |
| fragp->fr_var -= fill_size; |
| } |
| |
| |
| static void |
| convert_frag_narrow (segT segP, fragS *fragP, xtensa_format fmt, int slot) |
| { |
| TInsn tinsn, single_target; |
| int size, old_size, diff; |
| offsetT frag_offset; |
| |
| assert (slot == 0); |
| tinsn_from_chars (&tinsn, fragP->fr_opcode, 0); |
| |
| if (fragP->tc_frag_data.is_aligning_branch == 1) |
| { |
| assert (fragP->tc_frag_data.text_expansion[0] == 1 |
| || fragP->tc_frag_data.text_expansion[0] == 0); |
| convert_frag_immed (segP, fragP, fragP->tc_frag_data.text_expansion[0], |
| fmt, slot); |
| return; |
| } |
| |
| if (fragP->tc_frag_data.text_expansion[0] == 0) |
| { |
| /* No conversion. */ |
| fragP->fr_var = 0; |
| return; |
| } |
| |
| assert (fragP->fr_opcode != NULL); |
| |
| /* Frags in this relaxation state should only contain |
| single instruction bundles. */ |
| tinsn_immed_from_frag (&tinsn, fragP, 0); |
| |
| /* Just convert it to a wide form.... */ |
| size = 0; |
| old_size = xg_get_single_size (tinsn.opcode); |
| |
| tinsn_init (&single_target); |
| frag_offset = fragP->fr_opcode - fragP->fr_literal; |
| |
| if (! xg_is_single_relaxable_insn (&tinsn, &single_target, FALSE)) |
| { |
| as_bad (_("unable to widen instruction")); |
| return; |
| } |
| |
| size = xg_get_single_size (single_target.opcode); |
| xg_emit_insn_to_buf (&single_target, fragP->fr_opcode, fragP, |
| frag_offset, TRUE); |
| |
| diff = size - old_size; |
| assert (diff >= 0); |
| assert (diff <= fragP->fr_var); |
| fragP->fr_var -= diff; |
| fragP->fr_fix += diff; |
| |
| /* clean it up */ |
| fragP->fr_var = 0; |
| } |
| |
| |
| static void |
| convert_frag_fill_nop (fragS *fragP) |
| { |
| char *loc = &fragP->fr_literal[fragP->fr_fix]; |
| int size = fragP->tc_frag_data.text_expansion[0]; |
| assert ((unsigned) size == (fragP->fr_next->fr_address |
| - fragP->fr_address - fragP->fr_fix)); |
| if (size == 0) |
| { |
| /* No conversion. */ |
| fragP->fr_var = 0; |
| return; |
| } |
| assemble_nop (size, loc); |
| fragP->tc_frag_data.is_insn = TRUE; |
| fragP->fr_var -= size; |
| fragP->fr_fix += size; |
| frag_wane (fragP); |
| } |
| |
| |
| static fixS *fix_new_exp_in_seg |
| (segT, subsegT, fragS *, int, int, expressionS *, int, |
| bfd_reloc_code_real_type); |
| static void convert_frag_immed_finish_loop (segT, fragS *, TInsn *); |
| |
| static void |
| convert_frag_immed (segT segP, |
| fragS *fragP, |
| int min_steps, |
| xtensa_format fmt, |
| int slot) |
| { |
| char *immed_instr = fragP->fr_opcode; |
| TInsn orig_tinsn; |
| bfd_boolean expanded = FALSE; |
| bfd_boolean branch_jmp_to_next = FALSE; |
| char *fr_opcode = fragP->fr_opcode; |
| xtensa_isa isa = xtensa_default_isa; |
| bfd_boolean wide_insn = FALSE; |
| int bytes; |
| bfd_boolean is_loop; |
| |
| assert (fr_opcode != NULL); |
| |
| xg_clear_vinsn (&cur_vinsn); |
| |
| vinsn_from_chars (&cur_vinsn, fr_opcode); |
| if (cur_vinsn.num_slots > 1) |
| wide_insn = TRUE; |
| |
| orig_tinsn = cur_vinsn.slots[slot]; |
| tinsn_immed_from_frag (&orig_tinsn, fragP, slot); |
| |
| is_loop = xtensa_opcode_is_loop (xtensa_default_isa, orig_tinsn.opcode) == 1; |
| |
| if (workaround_b_j_loop_end && ! fragP->tc_frag_data.is_no_transform) |
| branch_jmp_to_next = is_branch_jmp_to_next (&orig_tinsn, fragP); |
| |
| if (branch_jmp_to_next && !next_frag_is_loop_target (fragP)) |
| { |
| /* Conversion just inserts a NOP and marks the fix as completed. */ |
| bytes = xtensa_format_length (isa, fmt); |
| if (bytes >= 4) |
| { |
| cur_vinsn.slots[slot].opcode = |
| xtensa_format_slot_nop_opcode (isa, cur_vinsn.format, slot); |
| cur_vinsn.slots[slot].ntok = 0; |
| } |
| else |
| { |
| bytes += fragP->tc_frag_data.text_expansion[0]; |
| assert (bytes == 2 || bytes == 3); |
| build_nop (&cur_vinsn.slots[0], bytes); |
| fragP->fr_fix += fragP->tc_frag_data.text_expansion[0]; |
| } |
| vinsn_to_insnbuf (&cur_vinsn, fr_opcode, frag_now, TRUE); |
| xtensa_insnbuf_to_chars |
| (isa, cur_vinsn.insnbuf, (unsigned char *) fr_opcode, 0); |
| fragP->fr_var = 0; |
| } |
| else |
| { |
| /* Here is the fun stuff: Get the immediate field from this |
| instruction. If it fits, we're done. If not, find the next |
| instruction sequence that fits. */ |
| |
| IStack istack; |
| int i; |
| symbolS *lit_sym = NULL; |
| int total_size = 0; |
| int target_offset = 0; |
| int old_size; |
| int diff; |
| symbolS *gen_label = NULL; |
| offsetT frag_offset; |
| bfd_boolean first = TRUE; |
| bfd_boolean last_is_jump; |
| |
| /* It does not fit. Find something that does and |
| convert immediately. */ |
| frag_offset = fr_opcode - fragP->fr_literal; |
| istack_init (&istack); |
| xg_assembly_relax (&istack, &orig_tinsn, |
| segP, fragP, frag_offset, min_steps, 0); |
| |
| old_size = xtensa_format_length (isa, fmt); |
| |
| /* Assemble this right inline. */ |
| |
| /* First, create the mapping from a label name to the REAL label. */ |
| target_offset = 0; |
| for (i = 0; i < istack.ninsn; i++) |
| { |
| TInsn *tinsn = &istack.insn[i]; |
| fragS *lit_frag; |
| |
| switch (tinsn->insn_type) |
| { |
| case ITYPE_LITERAL: |
| if (lit_sym != NULL) |
| as_bad (_("multiple literals in expansion")); |
| /* First find the appropriate space in the literal pool. */ |
| lit_frag = fragP->tc_frag_data.literal_frags[slot]; |
| if (lit_frag == NULL) |
| as_bad (_("no registered fragment for literal")); |
| if (tinsn->ntok != 1) |
| as_bad (_("number of literal tokens != 1")); |
| |
| /* Set the literal symbol and add a fixup. */ |
| lit_sym = lit_frag->fr_symbol; |
| break; |
| |
| case ITYPE_LABEL: |
| if (align_targets && !is_loop) |
| { |
| fragS *unreach = fragP->fr_next; |
| while (!(unreach->fr_type == rs_machine_dependent |
| && (unreach->fr_subtype == RELAX_MAYBE_UNREACHABLE |
| || unreach->fr_subtype == RELAX_UNREACHABLE))) |
| { |
| unreach = unreach->fr_next; |
| } |
| |
| assert (unreach->fr_type == rs_machine_dependent |
| && (unreach->fr_subtype == RELAX_MAYBE_UNREACHABLE |
| || unreach->fr_subtype == RELAX_UNREACHABLE)); |
| |
| target_offset += unreach->tc_frag_data.text_expansion[0]; |
| } |
| assert (gen_label == NULL); |
| gen_label = symbol_new (FAKE_LABEL_NAME, now_seg, |
| fr_opcode - fragP->fr_literal |
| + target_offset, fragP); |
| break; |
| |
| case ITYPE_INSN: |
| if (first && wide_insn) |
| { |
| target_offset += xtensa_format_length (isa, fmt); |
| first = FALSE; |
| if (!opcode_fits_format_slot (tinsn->opcode, fmt, slot)) |
| target_offset += xg_get_single_size (tinsn->opcode); |
| } |
| else |
| target_offset += xg_get_single_size (tinsn->opcode); |
| break; |
| } |
| } |
| |
| total_size = 0; |
| first = TRUE; |
| last_is_jump = FALSE; |
| for (i = 0; i < istack.ninsn; i++) |
| { |
| TInsn *tinsn = &istack.insn[i]; |
| fragS *lit_frag; |
| int size; |
| segT target_seg; |
| bfd_reloc_code_real_type reloc_type; |
| |
| switch (tinsn->insn_type) |
| { |
| case ITYPE_LITERAL: |
| lit_frag = fragP->tc_frag_data.literal_frags[slot]; |
| /* Already checked. */ |
| assert (lit_frag != NULL); |
| assert (lit_sym != NULL); |
| assert (tinsn->ntok == 1); |
| /* Add a fixup. */ |
| target_seg = S_GET_SEGMENT (lit_sym); |
| assert (target_seg); |
| if (tinsn->tok[0].X_op == O_pltrel) |
| reloc_type = BFD_RELOC_XTENSA_PLT; |
| else |
| reloc_type = BFD_RELOC_32; |
| fix_new_exp_in_seg (target_seg, 0, lit_frag, 0, 4, |
| &tinsn->tok[0], FALSE, reloc_type); |
| break; |
| |
| case ITYPE_LABEL: |
| break; |
| |
| case ITYPE_INSN: |
| xg_resolve_labels (tinsn, gen_label); |
| xg_resolve_literals (tinsn, lit_sym); |
| if (wide_insn && first) |
| { |
| first = FALSE; |
| if (opcode_fits_format_slot (tinsn->opcode, fmt, slot)) |
| { |
| cur_vinsn.slots[slot] = *tinsn; |
| } |
| else |
| { |
| cur_vinsn.slots[slot].opcode = |
| xtensa_format_slot_nop_opcode (isa, fmt, slot); |
| cur_vinsn.slots[slot].ntok = 0; |
| } |
| vinsn_to_insnbuf (&cur_vinsn, immed_instr, fragP, TRUE); |
| xtensa_insnbuf_to_chars (isa, cur_vinsn.insnbuf, |
| (unsigned char *) immed_instr, 0); |
| fragP->tc_frag_data.is_insn = TRUE; |
| size = xtensa_format_length (isa, fmt); |
| if (!opcode_fits_format_slot (tinsn->opcode, fmt, slot)) |
| { |
| xg_emit_insn_to_buf |
| (tinsn, immed_instr + size, fragP, |
| immed_instr - fragP->fr_literal + size, TRUE); |
| size += xg_get_single_size (tinsn->opcode); |
| } |
| } |
| else |
| { |
| size = xg_get_single_size (tinsn->opcode); |
| xg_emit_insn_to_buf (tinsn, immed_instr, fragP, |
| immed_instr - fragP->fr_literal, TRUE); |
| } |
| immed_instr += size; |
| total_size += size; |
| break; |
| } |
| } |
| |
| diff = total_size - old_size; |
| assert (diff >= 0); |
| if (diff != 0) |
| expanded = TRUE; |
| assert (diff <= fragP->fr_var); |
| fragP->fr_var -= diff; |
| fragP->fr_fix += diff; |
| } |
| |
| /* Check for undefined immediates in LOOP instructions. */ |
| if (is_loop) |
| { |
| symbolS *sym; |
| sym = orig_tinsn.tok[1].X_add_symbol; |
| if (sym != NULL && !S_IS_DEFINED (sym)) |
| { |
| as_bad (_("unresolved loop target symbol: %s"), S_GET_NAME (sym)); |
| return; |
| } |
| sym = orig_tinsn.tok[1].X_op_symbol; |
| if (sym != NULL && !S_IS_DEFINED (sym)) |
| { |
| as_bad (_("unresolved loop target symbol: %s"), S_GET_NAME (sym)); |
| return; |
| } |
| } |
| |
| if (expanded && xtensa_opcode_is_loop (isa, orig_tinsn.opcode) == 1) |
| convert_frag_immed_finish_loop (segP, fragP, &orig_tinsn); |
| |
| if (expanded && is_direct_call_opcode (orig_tinsn.opcode)) |
| { |
| /* Add an expansion note on the expanded instruction. */ |
| fix_new_exp_in_seg (now_seg, 0, fragP, fr_opcode - fragP->fr_literal, 4, |
| &orig_tinsn.tok[0], TRUE, |
| BFD_RELOC_XTENSA_ASM_EXPAND); |
| } |
| } |
| |
| |
| /* Add a new fix expression into the desired segment. We have to |
| switch to that segment to do this. */ |
| |
| static fixS * |
| fix_new_exp_in_seg (segT new_seg, |
| subsegT new_subseg, |
| fragS *frag, |
| int where, |
| int size, |
| expressionS *exp, |
| int pcrel, |
| bfd_reloc_code_real_type r_type) |
| { |
| fixS *new_fix; |
| segT seg = now_seg; |
| subsegT subseg = now_subseg; |
| |
| assert (new_seg != 0); |
| subseg_set (new_seg, new_subseg); |
| |
| new_fix = fix_new_exp (frag, where, size, exp, pcrel, r_type); |
| subseg_set (seg, subseg); |
| return new_fix; |
| } |
| |
| |
| /* Relax a loop instruction so that it can span loop >256 bytes. |
| |
| loop as, .L1 |
| .L0: |
| rsr as, LEND |
| wsr as, LBEG |
| addi as, as, lo8 (label-.L1) |
| addmi as, as, mid8 (label-.L1) |
| wsr as, LEND |
| isync |
| rsr as, LCOUNT |
| addi as, as, 1 |
| .L1: |
| <<body>> |
| label: |
| */ |
| |
| static void |
| convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) |
| { |
| TInsn loop_insn; |
| TInsn addi_insn; |
| TInsn addmi_insn; |
| unsigned long target; |
| static xtensa_insnbuf insnbuf = NULL; |
| unsigned int loop_length, loop_length_hi, loop_length_lo; |
| xtensa_isa isa = xtensa_default_isa; |
| addressT loop_offset; |
| addressT addi_offset = 9; |
| addressT addmi_offset = 12; |
| fragS *next_fragP; |
| int target_count; |
| |
| if (!insnbuf) |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| |
| /* Get the loop offset. */ |
| loop_offset = get_expanded_loop_offset (tinsn->opcode); |
| |
| /* Validate that there really is a LOOP at the loop_offset. Because |
| loops are not bundleable, we can assume that the instruction will be |
| in slot 0. */ |
| tinsn_from_chars (&loop_insn, fragP->fr_opcode + loop_offset, 0); |
| tinsn_immed_from_frag (&loop_insn, fragP, 0); |
| |
| assert (xtensa_opcode_is_loop (isa, loop_insn.opcode) == 1); |
| addi_offset += loop_offset; |
| addmi_offset += loop_offset; |
| |
| assert (tinsn->ntok == 2); |
| if (tinsn->tok[1].X_op == O_constant) |
| target = tinsn->tok[1].X_add_number; |
| else if (tinsn->tok[1].X_op == O_symbol) |
| { |
| /* Find the fragment. */ |
| symbolS *sym = tinsn->tok[1].X_add_symbol; |
| assert (S_GET_SEGMENT (sym) == segP |
| || S_GET_SEGMENT (sym) == absolute_section); |
| target = (S_GET_VALUE (sym) + tinsn->tok[1].X_add_number); |
| } |
| else |
| { |
| as_bad (_("invalid expression evaluation type %d"), tinsn->tok[1].X_op); |
| target = 0; |
| } |
| |
| know (symbolP); |
| know (symbolP->sy_frag); |
| know (!(S_GET_SEGMENT (symbolP) == absolute_section) |
| || symbol_get_frag (symbolP) == &zero_address_frag); |
| |
| loop_length = target - (fragP->fr_address + fragP->fr_fix); |
| loop_length_hi = loop_length & ~0x0ff; |
| loop_length_lo = loop_length & 0x0ff; |
| if (loop_length_lo >= 128) |
| { |
| loop_length_lo -= 256; |
| loop_length_hi += 256; |
| } |
| |
| /* Because addmi sign-extends the immediate, 'loop_length_hi' can be at most |
| 32512. If the loop is larger than that, then we just fail. */ |
| if (loop_length_hi > 32512) |
| as_bad_where (fragP->fr_file, fragP->fr_line, |
| _("loop too long for LOOP instruction")); |
| |
| tinsn_from_chars (&addi_insn, fragP->fr_opcode + addi_offset, 0); |
| assert (addi_insn.opcode == xtensa_addi_opcode); |
| |
| tinsn_from_chars (&addmi_insn, fragP->fr_opcode + addmi_offset, 0); |
| assert (addmi_insn.opcode == xtensa_addmi_opcode); |
| |
| set_expr_const (&addi_insn.tok[2], loop_length_lo); |
| tinsn_to_insnbuf (&addi_insn, insnbuf); |
| |
| fragP->tc_frag_data.is_insn = TRUE; |
| xtensa_insnbuf_to_chars |
| (isa, insnbuf, (unsigned char *) fragP->fr_opcode + addi_offset, 0); |
| |
| set_expr_const (&addmi_insn.tok[2], loop_length_hi); |
| tinsn_to_insnbuf (&addmi_insn, insnbuf); |
| xtensa_insnbuf_to_chars |
| (isa, insnbuf, (unsigned char *) fragP->fr_opcode + addmi_offset, 0); |
| |
| /* Walk through all of the frags from here to the loop end |
| and mark them as no_transform to keep them from being modified |
| by the linker. If we ever have a relocation for the |
| addi/addmi of the difference of two symbols we can remove this. */ |
| |
| target_count = 0; |
| for (next_fragP = fragP; next_fragP != NULL; |
| next_fragP = next_fragP->fr_next) |
| { |
| next_fragP->tc_frag_data.is_no_transform = TRUE; |
| if (next_fragP->tc_frag_data.is_loop_target) |
| target_count++; |
| if (target_count == 2) |
| break; |
| } |
| } |
| |
| |
| /* A map that keeps information on a per-subsegment basis. This is |
| maintained during initial assembly, but is invalid once the |
| subsegments are smashed together. I.E., it cannot be used during |
| the relaxation. */ |
| |
| typedef struct subseg_map_struct |
| { |
| /* the key */ |
| segT seg; |
| subsegT subseg; |
| |
| /* the data */ |
| unsigned flags; |
| float total_freq; /* fall-through + branch target frequency */ |
| float target_freq; /* branch target frequency alone */ |
| |
| struct subseg_map_struct *next; |
| } subseg_map; |
| |
| |
| static subseg_map *sseg_map = NULL; |
| |
| static subseg_map * |
| get_subseg_info (segT seg, subsegT subseg) |
| { |
| subseg_map *subseg_e; |
| |
| for (subseg_e = sseg_map; subseg_e; subseg_e = subseg_e->next) |
| { |
| if (seg == subseg_e->seg && subseg == subseg_e->subseg) |
| break; |
| } |
| return subseg_e; |
| } |
| |
| |
| static subseg_map * |
| add_subseg_info (segT seg, subsegT subseg) |
| { |
| subseg_map *subseg_e = (subseg_map *) xmalloc (sizeof (subseg_map)); |
| memset (subseg_e, 0, sizeof (subseg_map)); |
| subseg_e->seg = seg; |
| subseg_e->subseg = subseg; |
| subseg_e->flags = 0; |
| /* Start off considering every branch target very important. */ |
| subseg_e->target_freq = 1.0; |
| subseg_e->total_freq = 1.0; |
| subseg_e->next = sseg_map; |
| sseg_map = subseg_e; |
| return subseg_e; |
| } |
| |
| |
| static unsigned |
| get_last_insn_flags (segT seg, subsegT subseg) |
| { |
| subseg_map *subseg_e = get_subseg_info (seg, subseg); |
| if (subseg_e) |
| return subseg_e->flags; |
| return 0; |
| } |
| |
| |
| static void |
| set_last_insn_flags (segT seg, |
| subsegT subseg, |
| unsigned fl, |
| bfd_boolean val) |
| { |
| subseg_map *subseg_e = get_subseg_info (seg, subseg); |
| if (! subseg_e) |
| subseg_e = add_subseg_info (seg, subseg); |
| if (val) |
| subseg_e->flags |= fl; |
| else |
| subseg_e->flags &= ~fl; |
| } |
| |
| |
| static float |
| get_subseg_total_freq (segT seg, subsegT subseg) |
| { |
| subseg_map *subseg_e = get_subseg_info (seg, subseg); |
| if (subseg_e) |
| return subseg_e->total_freq; |
| return 1.0; |
| } |
| |
| |
| static float |
| get_subseg_target_freq (segT seg, subsegT subseg) |
| { |
| subseg_map *subseg_e = get_subseg_info (seg, subseg); |
| if (subseg_e) |
| return subseg_e->target_freq; |
| return 1.0; |
| } |
| |
| |
| static void |
| set_subseg_freq (segT seg, subsegT subseg, float total_f, float target_f) |
| { |
| subseg_map *subseg_e = get_subseg_info (seg, subseg); |
| if (! subseg_e) |
| subseg_e = add_subseg_info (seg, subseg); |
| subseg_e->total_freq = total_f; |
| subseg_e->target_freq = target_f; |
| } |
| |
| |
| /* Segment Lists and emit_state Stuff. */ |
| |
| static void |
| xtensa_move_seg_list_to_beginning (seg_list *head) |
| { |
| head = head->next; |
| while (head) |
| { |
| segT literal_section = head->seg; |
| |
| /* Move the literal section to the front of the section list. */ |
| assert (literal_section); |
| if (literal_section != stdoutput->sections) |
| { |
| bfd_section_list_remove (stdoutput, literal_section); |
| bfd_section_list_prepend (stdoutput, literal_section); |
| } |
| head = head->next; |
| } |
| } |
| |
| |
| static void mark_literal_frags (seg_list *); |
| |
| static void |
| xtensa_move_literals (void) |
| { |
| seg_list *segment; |
| frchainS *frchain_from, *frchain_to; |
| fragS *search_frag, *next_frag, *last_frag, *literal_pool, *insert_after; |
| fragS **frag_splice; |
| emit_state state; |
| segT dest_seg; |
| fixS *fix, *next_fix, **fix_splice; |
| sym_list *lit; |
| |
| mark_literal_frags (literal_head->next); |
| mark_literal_frags (init_literal_head->next); |
| mark_literal_frags (fini_literal_head->next); |
| |
| if (use_literal_section) |
| return; |
| |
| segment = literal_head->next; |
| while (segment) |
| { |
| frchain_from = seg_info (segment->seg)->frchainP; |
| search_frag = frchain_from->frch_root; |
| literal_pool = NULL; |
| frchain_to = NULL; |
| frag_splice = &(frchain_from->frch_root); |
| |
| while (!search_frag->tc_frag_data.literal_frag) |
| { |
| assert (search_frag->fr_fix == 0 |
| || search_frag->fr_type == rs_align); |
| search_frag = search_frag->fr_next; |
| } |
| |
| assert (search_frag->tc_frag_data.literal_frag->fr_subtype |
| == RELAX_LITERAL_POOL_BEGIN); |
| xtensa_switch_section_emit_state (&state, segment->seg, 0); |
| |
| /* Make sure that all the frags in this series are closed, and |
| that there is at least one left over of zero-size. This |
| prevents us from making a segment with an frchain without any |
| frags in it. */ |
| frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| last_frag = frag_now; |
| frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| |
| while (search_frag != frag_now) |
| { |
| next_frag = search_frag->fr_next; |
| |
| /* First, move the frag out of the literal section and |
| to the appropriate place. */ |
| if (search_frag->tc_frag_data.literal_frag) |
| { |
| literal_pool = search_frag->tc_frag_data.literal_frag; |
| assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN); |
| frchain_to = literal_pool->tc_frag_data.lit_frchain; |
| assert (frchain_to); |
| } |
| insert_after = literal_pool; |
| |
| while (insert_after->fr_next->fr_subtype != RELAX_LITERAL_POOL_END) |
| insert_after = insert_after->fr_next; |
| |
| dest_seg = insert_after->fr_next->tc_frag_data.lit_seg; |
| |
| *frag_splice = next_frag; |
| search_frag->fr_next = insert_after->fr_next; |
| insert_after->fr_next = search_frag; |
| search_frag->tc_frag_data.lit_seg = dest_seg; |
| |
| /* Now move any fixups associated with this frag to the |
| right section. */ |
| fix = frchain_from->fix_root; |
| fix_splice = &(frchain_from->fix_root); |
| while (fix) |
| { |
| next_fix = fix->fx_next; |
| if (fix->fx_frag == search_frag) |
| { |
| *fix_splice = next_fix; |
| fix->fx_next = frchain_to->fix_root; |
| frchain_to->fix_root = fix; |
| if (frchain_to->fix_tail == NULL) |
| frchain_to->fix_tail = fix; |
| } |
| else |
| fix_splice = &(fix->fx_next); |
| fix = next_fix; |
| } |
| search_frag = next_frag; |
| } |
| |
| if (frchain_from->fix_root != NULL) |
| { |
| frchain_from = seg_info (segment->seg)->frchainP; |
| as_warn (_("fixes not all moved from %s"), segment->seg->name); |
| |
| assert (frchain_from->fix_root == NULL); |
| } |
| frchain_from->fix_tail = NULL; |
| xtensa_restore_emit_state (&state); |
| segment = segment->next; |
| } |
| |
| /* Now fix up the SEGMENT value for all the literal symbols. */ |
| for (lit = literal_syms; lit; lit = lit->next) |
| { |
| symbolS *lit_sym = lit->sym; |
| segT dest_seg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg; |
| if (dest_seg) |
| S_SET_SEGMENT (lit_sym, dest_seg); |
| } |
| } |
| |
| |
| /* Walk over all the frags for segments in a list and mark them as |
| containing literals. As clunky as this is, we can't rely on frag_var |
| and frag_variant to get called in all situations. */ |
| |
| static void |
| mark_literal_frags (seg_list *segment) |
| { |
| frchainS *frchain_from; |
| fragS *search_frag; |
| |
| while (segment) |
| { |
| frchain_from = seg_info (segment->seg)->frchainP; |
| search_frag = frchain_from->frch_root; |
| while (search_frag) |
| { |
| search_frag->tc_frag_data.is_literal = TRUE; |
| search_frag = search_frag->fr_next; |
| } |
| segment = segment->next; |
| } |
| } |
| |
| |
| static void |
| xtensa_reorder_seg_list (seg_list *head, segT after) |
| { |
| /* Move all of the sections in the section list to come |
| after "after" in the gnu segment list. */ |
| |
| head = head->next; |
| while (head) |
| { |
| segT literal_section = head->seg; |
| |
| /* Move the literal section after "after". */ |
| assert (literal_section); |
| if (literal_section != after) |
| { |
| bfd_section_list_remove (stdoutput, literal_section); |
| bfd_section_list_insert_after (stdoutput, after, literal_section); |
| } |
| |
| head = head->next; |
| } |
| } |
| |
| |
| /* Push all the literal segments to the end of the gnu list. */ |
| |
| static void |
| xtensa_reorder_segments (void) |
| { |
| segT sec; |
| segT last_sec = 0; |
| int old_count = 0; |
| int new_count = 0; |
| |
| for (sec = stdoutput->sections; sec != NULL; sec = sec->next) |
| { |
| last_sec = sec; |
| old_count++; |
| } |
| |
| /* Now that we have the last section, push all the literal |
| sections to the end. */ |
| xtensa_reorder_seg_list (literal_head, last_sec); |
| xtensa_reorder_seg_list (init_literal_head, last_sec); |
| xtensa_reorder_seg_list (fini_literal_head, last_sec); |
| |
| /* Now perform the final error check. */ |
| for (sec = stdoutput->sections; sec != NULL; sec = sec->next) |
| new_count++; |
| assert (new_count == old_count); |
| } |
| |
| |
| /* Change the emit state (seg, subseg, and frag related stuff) to the |
| correct location. Return a emit_state which can be passed to |
| xtensa_restore_emit_state to return to current fragment. */ |
| |
| static void |
| xtensa_switch_to_literal_fragment (emit_state *result) |
| { |
| if (directive_state[directive_absolute_literals]) |
| { |
| cache_literal_section (0, default_lit_sections.lit4_seg_name, |
| &default_lit_sections.lit4_seg, FALSE); |
| xtensa_switch_section_emit_state (result, |
| default_lit_sections.lit4_seg, 0); |
| } |
| else |
| xtensa_switch_to_non_abs_literal_fragment (result); |
| |
| /* Do a 4-byte align here. */ |
| frag_align (2, 0, 0); |
| record_alignment (now_seg, 2); |
| } |
| |
| |
| static void |
| xtensa_switch_to_non_abs_literal_fragment (emit_state *result) |
| { |
| /* When we mark a literal pool location, we want to put a frag in |
| the literal pool that points to it. But to do that, we want to |
| switch_to_literal_fragment. But literal sections don't have |
| literal pools, so their location is always null, so we would |
| recurse forever. This is kind of hacky, but it works. */ |
| |
| static bfd_boolean recursive = FALSE; |
| fragS *pool_location = get_literal_pool_location (now_seg); |
| bfd_boolean is_init = |
| (now_seg && !strcmp (segment_name (now_seg), INIT_SECTION_NAME)); |
| |
| bfd_boolean is_fini = |
| (now_seg && !strcmp (segment_name (now_seg), FINI_SECTION_NAME)); |
| |
| if (pool_location == NULL |
| && !use_literal_section |
| && !recursive |
| && !is_init && ! is_fini) |
| { |
| as_bad (_("literal pool location required for text-section-literals; specify with .literal_position")); |
| recursive = TRUE; |
| xtensa_mark_literal_pool_location (); |
| recursive = FALSE; |
| } |
| |
| /* Special case: If we are in the ".fini" or ".init" section, then |
| we will ALWAYS be generating to the ".fini.literal" and |
| ".init.literal" sections. */ |
| |
| if (is_init) |
| { |
| cache_literal_section (init_literal_head, |
| default_lit_sections.init_lit_seg_name, |
| &default_lit_sections.init_lit_seg, TRUE); |
| xtensa_switch_section_emit_state (result, |
| default_lit_sections.init_lit_seg, 0); |
| } |
| else if (is_fini) |
| { |
| cache_literal_section (fini_literal_head, |
| default_lit_sections.fini_lit_seg_name, |
| &default_lit_sections.fini_lit_seg, TRUE); |
| xtensa_switch_section_emit_state (result, |
| default_lit_sections.fini_lit_seg, 0); |
| } |
| else |
| { |
| cache_literal_section (literal_head, |
| default_lit_sections.lit_seg_name, |
| &default_lit_sections.lit_seg, TRUE); |
| xtensa_switch_section_emit_state (result, |
| default_lit_sections.lit_seg, 0); |
| } |
| |
| if (!use_literal_section |
| && !is_init && !is_fini |
| && get_literal_pool_location (now_seg) != pool_location) |
| { |
| /* Close whatever frag is there. */ |
| frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| frag_now->tc_frag_data.literal_frag = pool_location; |
| frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); |
| xtensa_set_frag_assembly_state (frag_now); |
| } |
| } |
| |
| |
| /* Call this function before emitting data into the literal section. |
| This is a helper function for xtensa_switch_to_literal_fragment. |
| This is similar to a .section new_now_seg subseg. */ |
| |
| static void |
| xtensa_switch_section_emit_state (emit_state *state, |
| segT new_now_seg, |
| subsegT new_now_subseg) |
| { |
| state->name = now_seg->name; |
| state->now_seg = now_seg; |
| state->now_subseg = now_subseg; |
| state->generating_literals = generating_literals; |
| generating_literals++; |
| subseg_set (new_now_seg, new_now_subseg); |
| } |
| |
| |
| /* Use to restore the emitting into the normal place. */ |
| |
| static void |
| xtensa_restore_emit_state (emit_state *state) |
| { |
| generating_literals = state->generating_literals; |
| subseg_set (state->now_seg, state->now_subseg); |
| } |
| |
| |
| /* Get a segment of a given name. If the segment is already |
| present, return it; otherwise, create a new one. */ |
| |
| static void |
| cache_literal_section (seg_list *head, |
| const char *name, |
| segT *pseg, |
| bfd_boolean is_code) |
| { |
| segT current_section = now_seg; |
| int current_subsec = now_subseg; |
| segT seg; |
| |
| if (*pseg != 0) |
| return; |
| |
| /* Check if the named section exists. */ |
| for (seg = stdoutput->sections; seg; seg = seg->next) |
| { |
| if (!strcmp (segment_name (seg), name)) |
| break; |
| } |
| |
| if (!seg) |
| { |
| /* Create a new literal section. */ |
| seg = subseg_new (name, (subsegT) 0); |
| if (head) |
| { |
| /* Add the newly created literal segment to the specified list. */ |
| seg_list *n = (seg_list *) xmalloc (sizeof (seg_list)); |
| n->seg = seg; |
| n->next = head->next; |
| head->next = n; |
| } |
| bfd_set_section_flags (stdoutput, seg, SEC_HAS_CONTENTS | |
| SEC_READONLY | SEC_ALLOC | SEC_LOAD |
| | (is_code ? SEC_CODE : SEC_DATA)); |
| bfd_set_section_alignment (stdoutput, seg, 2); |
| } |
| |
| *pseg = seg; |
| subseg_set (current_section, current_subsec); |
| } |
| |
| |
| /* Property Tables Stuff. */ |
| |
| #define XTENSA_INSN_SEC_NAME ".xt.insn" |
| #define XTENSA_LIT_SEC_NAME ".xt.lit" |
| #define XTENSA_PROP_SEC_NAME ".xt.prop" |
| |
| typedef bfd_boolean (*frag_predicate) (const fragS *); |
| typedef void (*frag_flags_fn) (const fragS *, frag_flags *); |
| |
| static bfd_boolean get_frag_is_literal (const fragS *); |
| static void xtensa_create_property_segments |
| (frag_predicate, frag_predicate, const char *, xt_section_type); |
| static void xtensa_create_xproperty_segments |
| (frag_flags_fn, const char *, xt_section_type); |
| static segment_info_type *retrieve_segment_info (segT); |
| static segT retrieve_xtensa_section (char *); |
| static bfd_boolean section_has_property (segT, frag_predicate); |
| static bfd_boolean section_has_xproperty (segT, frag_flags_fn); |
| static void add_xt_block_frags |
| (segT, segT, xtensa_block_info **, frag_predicate, frag_predicate); |
| static bfd_boolean xtensa_frag_flags_is_empty (const frag_flags *); |
| static void xtensa_frag_flags_init (frag_flags *); |
| static void get_frag_property_flags (const fragS *, frag_flags *); |
| static bfd_vma frag_flags_to_number (const frag_flags *); |
| static void add_xt_prop_frags |
| (segT, segT, xtensa_block_info **, frag_flags_fn); |
| |
| /* Set up property tables after relaxation. */ |
| |
| void |
| xtensa_post_relax_hook (void) |
| { |
| xtensa_move_seg_list_to_beginning (literal_head); |
| xtensa_move_seg_list_to_beginning (init_literal_head); |
| xtensa_move_seg_list_to_beginning (fini_literal_head); |
| |
| xtensa_find_unmarked_state_frags (); |
| |
| xtensa_create_property_segments (get_frag_is_literal, |
| NULL, |
| XTENSA_LIT_SEC_NAME, |
| xt_literal_sec); |
| xtensa_create_xproperty_segments (get_frag_property_flags, |
| XTENSA_PROP_SEC_NAME, |
| xt_prop_sec); |
| |
| if (warn_unaligned_branch_targets) |
| bfd_map_over_sections (stdoutput, xtensa_find_unaligned_branch_targets, 0); |
| bfd_map_over_sections (stdoutput, xtensa_find_unaligned_loops, 0); |
| } |
| |
| |
| /* This function is only meaningful after xtensa_move_literals. */ |
| |
| static bfd_boolean |
| get_frag_is_literal (const fragS *fragP) |
| { |
| assert (fragP != NULL); |
| return fragP->tc_frag_data.is_literal; |
| } |
| |
| |
| static void |
| xtensa_create_property_segments (frag_predicate property_function, |
| frag_predicate end_property_function, |
| const char *section_name_base, |
| xt_section_type sec_type) |
| { |
| segT *seclist; |
| |
| /* Walk over all of the current segments. |
| Walk over each fragment |
| For each non-empty fragment, |
| Build a property record (append where possible). */ |
| |
| for (seclist = &stdoutput->sections; |
| seclist && *seclist; |
| seclist = &(*seclist)->next) |
| { |
| segT sec = *seclist; |
| flagword flags; |
| |
| flags = bfd_get_section_flags (stdoutput, sec); |
| if (flags & SEC_DEBUGGING) |
| continue; |
| if (!(flags & SEC_ALLOC)) |
| continue; |
| |
| if (section_has_property (sec, property_function)) |
| { |
| char *property_section_name = |
| xtensa_get_property_section_name (sec, section_name_base); |
| segT insn_sec = retrieve_xtensa_section (property_section_name); |
| segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec); |
| xtensa_block_info **xt_blocks = |
| &xt_seg_info->tc_segment_info_data.blocks[sec_type]; |
| /* Walk over all of the frchains here and add new sections. */ |
| add_xt_block_frags (sec, insn_sec, xt_blocks, property_function, |
| end_property_function); |
| } |
| } |
| |
| /* Now we fill them out.... */ |
| |
| for (seclist = &stdoutput->sections; |
| seclist && *seclist; |
| seclist = &(*seclist)->next) |
| { |
| segment_info_type *seginfo; |
| xtensa_block_info *block; |
| segT sec = *seclist; |
| |
| seginfo = seg_info (sec); |
| block = seginfo->tc_segment_info_data.blocks[sec_type]; |
| |
| if (block) |
| { |
| xtensa_block_info *cur_block; |
| /* This is a section with some data. */ |
| int num_recs = 0; |
| bfd_size_type rec_size; |
| |
| for (cur_block = block; cur_block; cur_block = cur_block->next) |
| num_recs++; |
| |
| rec_size = num_recs * 8; |
| bfd_set_section_size (stdoutput, sec, rec_size); |
| |
| /* In order to make this work with the assembler, we have to |
| build some frags and then build the "fixups" for it. It |
| would be easier to just set the contents then set the |
| arlents. */ |
| |
| if (num_recs) |
| { |
| /* Allocate a fragment and leak it. */ |
| fragS *fragP; |
| bfd_size_type frag_size; |
| fixS *fixes; |
| frchainS *frchainP; |
| int i; |
| char *frag_data; |
| |
| frag_size = sizeof (fragS) + rec_size; |
| fragP = (fragS *) xmalloc (frag_size); |
| |
| memset (fragP, 0, frag_size); |
| fragP->fr_address = 0; |
| fragP->fr_next = NULL; |
| fragP->fr_fix = rec_size; |
| fragP->fr_var = 0; |
| fragP->fr_type = rs_fill; |
| /* The rest are zeros. */ |
| |
| frchainP = seginfo->frchainP; |
| frchainP->frch_root = fragP; |
| frchainP->frch_last = fragP; |
| |
| fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs); |
| memset (fixes, 0, sizeof (fixS) * num_recs); |
| |
| seginfo->fix_root = fixes; |
| seginfo->fix_tail = &fixes[num_recs - 1]; |
| cur_block = block; |
| frag_data = &fragP->fr_literal[0]; |
| for (i = 0; i < num_recs; i++) |
| { |
| fixS *fix = &fixes[i]; |
| assert (cur_block); |
| |
| /* Write the fixup. */ |
| if (i != num_recs - 1) |
| fix->fx_next = &fixes[i + 1]; |
| else |
| fix->fx_next = NULL; |
| fix->fx_size = 4; |
| fix->fx_done = 0; |
| fix->fx_frag = fragP; |
| fix->fx_where = i * 8; |
| fix->fx_addsy = section_symbol (cur_block->sec); |
| fix->fx_offset = cur_block->offset; |
| fix->fx_r_type = BFD_RELOC_32; |
| fix->fx_file = "Internal Assembly"; |
| fix->fx_line = 0; |
| |
| /* Write the length. */ |
| md_number_to_chars (&frag_data[4 + 8 * i], |
| cur_block->size, 4); |
| cur_block = cur_block->next; |
| } |
| } |
| } |
| } |
| } |
| |
| |
| static void |
| xtensa_create_xproperty_segments (frag_flags_fn flag_fn, |
| const char *section_name_base, |
| xt_section_type sec_type) |
| { |
| segT *seclist; |
| |
| /* Walk over all of the current segments. |
| Walk over each fragment. |
| For each fragment that has instructions, |
| build an instruction record (append where possible). */ |
| |
| for (seclist = &stdoutput->sections; |
| seclist && *seclist; |
| seclist = &(*seclist)->next) |
| { |
| segT sec = *seclist; |
| flagword flags; |
| |
| flags = bfd_get_section_flags (stdoutput, sec); |
| if ((flags & SEC_DEBUGGING) |
| || !(flags & SEC_ALLOC) |
| || (flags & SEC_MERGE)) |
| continue; |
| |
| if (section_has_xproperty (sec, flag_fn)) |
| { |
| char *property_section_name = |
| xtensa_get_property_section_name (sec, section_name_base); |
| segT insn_sec = retrieve_xtensa_section (property_section_name); |
| segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec); |
| xtensa_block_info **xt_blocks = |
| &xt_seg_info->tc_segment_info_data.blocks[sec_type]; |
| /* Walk over all of the frchains here and add new sections. */ |
| add_xt_prop_frags (sec, insn_sec, xt_blocks, flag_fn); |
| } |
| } |
| |
| /* Now we fill them out.... */ |
| |
| for (seclist = &stdoutput->sections; |
| seclist && *seclist; |
| seclist = &(*seclist)->next) |
| { |
| segment_info_type *seginfo; |
| xtensa_block_info *block; |
| segT sec = *seclist; |
| |
| seginfo = seg_info (sec); |
| block = seginfo->tc_segment_info_data.blocks[sec_type]; |
| |
| if (block) |
| { |
| xtensa_block_info *cur_block; |
| /* This is a section with some data. */ |
| int num_recs = 0; |
| bfd_size_type rec_size; |
| |
| for (cur_block = block; cur_block; cur_block = cur_block->next) |
| num_recs++; |
| |
| rec_size = num_recs * (8 + 4); |
| bfd_set_section_size (stdoutput, sec, rec_size); |
| |
| /* elf_section_data (sec)->this_hdr.sh_entsize = 12; */ |
| |
| /* In order to make this work with the assembler, we have to build |
| some frags then build the "fixups" for it. It would be easier to |
| just set the contents then set the arlents. */ |
| |
| if (num_recs) |
| { |
| /* Allocate a fragment and (unfortunately) leak it. */ |
| fragS *fragP; |
| bfd_size_type frag_size; |
| fixS *fixes; |
| frchainS *frchainP; |
| int i; |
| char *frag_data; |
| |
| frag_size = sizeof (fragS) + rec_size; |
| fragP = (fragS *) xmalloc (frag_size); |
| |
| memset (fragP, 0, frag_size); |
| fragP->fr_address = 0; |
| fragP->fr_next = NULL; |
| fragP->fr_fix = rec_size; |
| fragP->fr_var = 0; |
| fragP->fr_type = rs_fill; |
| /* The rest are zeros. */ |
| |
| frchainP = seginfo->frchainP; |
| frchainP->frch_root = fragP; |
| frchainP->frch_last = fragP; |
| |
| fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs); |
| memset (fixes, 0, sizeof (fixS) * num_recs); |
| |
| seginfo->fix_root = fixes; |
| seginfo->fix_tail = &fixes[num_recs - 1]; |
| cur_block = block; |
| frag_data = &fragP->fr_literal[0]; |
| for (i = 0; i < num_recs; i++) |
| { |
| fixS *fix = &fixes[i]; |
| assert (cur_block); |
| |
| /* Write the fixup. */ |
| if (i != num_recs - 1) |
| fix->fx_next = &fixes[i + 1]; |
| else |
| fix->fx_next = NULL; |
| fix->fx_size = 4; |
| fix->fx_done = 0; |
| fix->fx_frag = fragP; |
| fix->fx_where = i * (8 + 4); |
| fix->fx_addsy = section_symbol (cur_block->sec); |
| fix->fx_offset = cur_block->offset; |
| fix->fx_r_type = BFD_RELOC_32; |
| fix->fx_file = "Internal Assembly"; |
| fix->fx_line = 0; |
| |
| /* Write the length. */ |
| md_number_to_chars (&frag_data[4 + (8+4) * i], |
| cur_block->size, 4); |
| md_number_to_chars (&frag_data[8 + (8+4) * i], |
| frag_flags_to_number (&cur_block->flags), |
| 4); |
| cur_block = cur_block->next; |
| } |
| } |
| } |
| } |
| } |
| |
| |
| static segment_info_type * |
| retrieve_segment_info (segT seg) |
| { |
| segment_info_type *seginfo; |
| seginfo = (segment_info_type *) bfd_get_section_userdata (stdoutput, seg); |
| if (!seginfo) |
| { |
| frchainS *frchainP; |
| |
| seginfo = (segment_info_type *) xmalloc (sizeof (*seginfo)); |
| memset ((void *) seginfo, 0, sizeof (*seginfo)); |
| seginfo->fix_root = NULL; |
| seginfo->fix_tail = NULL; |
| seginfo->bfd_section = seg; |
| seginfo->sym = 0; |
| /* We will not be dealing with these, only our special ones. */ |
| bfd_set_section_userdata (stdoutput, seg, (void *) seginfo); |
| |
| frchainP = (frchainS *) xmalloc (sizeof (frchainS)); |
| frchainP->frch_root = NULL; |
| frchainP->frch_last = NULL; |
| frchainP->frch_next = NULL; |
| frchainP->frch_seg = seg; |
| frchainP->frch_subseg = 0; |
| frchainP->fix_root = NULL; |
| frchainP->fix_tail = NULL; |
| /* Do not init the objstack. */ |
| /* obstack_begin (&frchainP->frch_obstack, chunksize); */ |
| /* frchainP->frch_frag_now = fragP; */ |
| frchainP->frch_frag_now = NULL; |
| |
| seginfo->frchainP = frchainP; |
| } |
| |
| return seginfo; |
| } |
| |
| |
| static segT |
| retrieve_xtensa_section (char *sec_name) |
| { |
| bfd *abfd = stdoutput; |
| flagword flags, out_flags, link_once_flags; |
| segT s; |
| |
| flags = bfd_get_section_flags (abfd, now_seg); |
| link_once_flags = (flags & SEC_LINK_ONCE); |
| if (link_once_flags) |
| link_once_flags |= (flags & SEC_LINK_DUPLICATES); |
| out_flags = (SEC_RELOC | SEC_HAS_CONTENTS | SEC_READONLY | link_once_flags); |
| |
| s = bfd_make_section_old_way (abfd, sec_name); |
| if (s == NULL) |
| as_bad (_("could not create section %s"), sec_name); |
| if (!bfd_set_section_flags (abfd, s, out_flags)) |
| as_bad (_("invalid flag combination on section %s"), sec_name); |
| |
| return s; |
| } |
| |
| |
| static bfd_boolean |
| section_has_property (segT sec, frag_predicate property_function) |
| { |
| segment_info_type *seginfo = seg_info (sec); |
| fragS *fragP; |
| |
| if (seginfo && seginfo->frchainP) |
| { |
| for (fragP = seginfo->frchainP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| if (property_function (fragP) |
| && (fragP->fr_type != rs_fill || fragP->fr_fix != 0)) |
| return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| static bfd_boolean |
| section_has_xproperty (segT sec, frag_flags_fn property_function) |
| { |
| segment_info_type *seginfo = seg_info (sec); |
| fragS *fragP; |
| |
| if (seginfo && seginfo->frchainP) |
| { |
| for (fragP = seginfo->frchainP->frch_root; fragP; fragP = fragP->fr_next) |
| { |
| frag_flags prop_flags; |
| property_function (fragP, &prop_flags); |
| if (!xtensa_frag_flags_is_empty (&prop_flags)) |
| return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| /* Two types of block sections exist right now: literal and insns. */ |
| |
| static void |
| add_xt_block_frags (segT sec, |
| segT xt_block_sec, |
| xtensa_block_info **xt_block, |
| frag_predicate property_function, |
| frag_predicate end_property_function) |
| { |
| segment_info_type *seg_info; |
| segment_info_type *xt_seg_info; |
| bfd_vma seg_offset; |
| fragS *fragP; |
| |
| xt_seg_info = retrieve_segment_info (xt_block_sec); |
| seg_info = retrieve_segment_info (sec); |
| |
| /* Build it if needed. */ |
| while (*xt_block != NULL) |
| xt_block = &(*xt_block)->next; |
| /* We are either at NULL at the beginning or at the end. */ |
| |
| /* Walk through the frags. */ |
| seg_offset = 0; |
| |
| if (seg_info->frchainP) |
| { |
| for (fragP = seg_info->frchainP->frch_root; |
| fragP; |
| fragP = fragP->fr_next) |
| { |
| if (property_function (fragP) |
| && (fragP->fr_type != rs_fill || fragP->fr_fix != 0)) |
| { |
| if (*xt_block != NULL) |
| { |
| if ((*xt_block)->offset + (*xt_block)->size |
| == fragP->fr_address) |
| (*xt_block)->size += fragP->fr_fix; |
| else |
| xt_block = &((*xt_block)->next); |
| } |
| if (*xt_block == NULL) |
| { |
| xtensa_block_info *new_block = (xtensa_block_info *) |
| xmalloc (sizeof (xtensa_block_info)); |
| new_block->sec = sec; |
| new_block->offset = fragP->fr_address; |
| new_block->size = fragP->fr_fix; |
| new_block->next = NULL; |
| xtensa_frag_flags_init (&new_block->flags); |
| *xt_block = new_block; |
| } |
| if (end_property_function |
| && end_property_function (fragP)) |
| { |
| xt_block = &((*xt_block)->next); |
| } |
| } |
| } |
| } |
| } |
| |
| |
| /* Break the encapsulation of add_xt_prop_frags here. */ |
| |
| static bfd_boolean |
| xtensa_frag_flags_is_empty (const frag_flags *prop_flags) |
| { |
| if (prop_flags->is_literal |
| || prop_flags->is_insn |
| || prop_flags->is_data |
| || prop_flags->is_unreachable) |
| return FALSE; |
| return TRUE; |
| } |
| |
| |
| static void |
| xtensa_frag_flags_init (frag_flags *prop_flags) |
| { |
| memset (prop_flags, 0, sizeof (frag_flags)); |
| } |
| |
| |
| static void |
| get_frag_property_flags (const fragS *fragP, frag_flags *prop_flags) |
| { |
| xtensa_frag_flags_init (prop_flags); |
| if (fragP->tc_frag_data.is_literal) |
| prop_flags->is_literal = TRUE; |
| if (fragP->tc_frag_data.is_unreachable) |
| prop_flags->is_unreachable = TRUE; |
| else if (fragP->tc_frag_data.is_insn) |
| { |
| prop_flags->is_insn = TRUE; |
| if (fragP->tc_frag_data.is_loop_target) |
| prop_flags->insn.is_loop_target = TRUE; |
| if (fragP->tc_frag_data.is_branch_target) |
| prop_flags->insn.is_branch_target = TRUE; |
| if (fragP->tc_frag_data.is_specific_opcode |
| || fragP->tc_frag_data.is_no_transform) |
| prop_flags->insn.is_no_transform = TRUE; |
| if (fragP->tc_frag_data.is_no_density) |
| prop_flags->insn.is_no_density = TRUE; |
| if (fragP->tc_frag_data.use_absolute_literals) |
| prop_flags->insn.is_abslit = TRUE; |
| } |
| if (fragP->tc_frag_data.is_align) |
| { |
| prop_flags->is_align = TRUE; |
| prop_flags->alignment = fragP->tc_frag_data.alignment; |
| if (xtensa_frag_flags_is_empty (prop_flags)) |
| prop_flags->is_data = TRUE; |
| } |
| } |
| |
| |
| static bfd_vma |
| frag_flags_to_number (const frag_flags *prop_flags) |
| { |
| bfd_vma num = 0; |
| if (prop_flags->is_literal) |
| num |= XTENSA_PROP_LITERAL; |
| if (prop_flags->is_insn) |
| num |= XTENSA_PROP_INSN; |
| if (prop_flags->is_data) |
| num |= XTENSA_PROP_DATA; |
| if (prop_flags->is_unreachable) |
| num |= XTENSA_PROP_UNREACHABLE; |
| if (prop_flags->insn.is_loop_target) |
| num |= XTENSA_PROP_INSN_LOOP_TARGET; |
| if (prop_flags->insn.is_branch_target) |
| { |
| num |= XTENSA_PROP_INSN_BRANCH_TARGET; |
| num = SET_XTENSA_PROP_BT_ALIGN (num, prop_flags->insn.bt_align_priority); |
| } |
| |
| if (prop_flags->insn.is_no_density) |
| num |= XTENSA_PROP_INSN_NO_DENSITY; |
| if (prop_flags->insn.is_no_transform) |
| num |= XTENSA_PROP_INSN_NO_TRANSFORM; |
| if (prop_flags->insn.is_no_reorder) |
| num |= XTENSA_PROP_INSN_NO_REORDER; |
| if (prop_flags->insn.is_abslit) |
| num |= XTENSA_PROP_INSN_ABSLIT; |
| |
| if (prop_flags->is_align) |
| { |
| num |= XTENSA_PROP_ALIGN; |
| num = SET_XTENSA_PROP_ALIGNMENT (num, prop_flags->alignment); |
| } |
| |
| return num; |
| } |
| |
| |
| static bfd_boolean |
| xtensa_frag_flags_combinable (const frag_flags *prop_flags_1, |
| const frag_flags *prop_flags_2) |
| { |
| /* Cannot combine with an end marker. */ |
| |
| if (prop_flags_1->is_literal != prop_flags_2->is_literal) |
| return FALSE; |
| if (prop_flags_1->is_insn != prop_flags_2->is_insn) |
| return FALSE; |
| if (prop_flags_1->is_data != prop_flags_2->is_data) |
| return FALSE; |
| |
| if (prop_flags_1->is_insn) |
| { |
| /* Properties of the beginning of the frag. */ |
| if (prop_flags_2->insn.is_loop_target) |
| return FALSE; |
| if (prop_flags_2->insn.is_branch_target) |
| return FALSE; |
| if (prop_flags_1->insn.is_no_density != |
| prop_flags_2->insn.is_no_density) |
| return FALSE; |
| if (prop_flags_1->insn.is_no_transform != |
| prop_flags_2->insn.is_no_transform) |
| return FALSE; |
| if (prop_flags_1->insn.is_no_reorder != |
| prop_flags_2->insn.is_no_reorder) |
| return FALSE; |
| if (prop_flags_1->insn.is_abslit != |
| prop_flags_2->insn.is_abslit) |
| return FALSE; |
| } |
| |
| if (prop_flags_1->is_align) |
| return FALSE; |
| |
| return TRUE; |
| } |
| |
| |
| static bfd_vma |
| xt_block_aligned_size (const xtensa_block_info *xt_block) |
| { |
| bfd_vma end_addr; |
| unsigned align_bits; |
| |
| if (!xt_block->flags.is_align) |
| return xt_block->size; |
| |
| end_addr = xt_block->offset + xt_block->size; |
| align_bits = xt_block->flags.alignment; |
| end_addr = ((end_addr + ((1 << align_bits) -1)) >> align_bits) << align_bits; |
| return end_addr - xt_block->offset; |
| } |
| |
| |
| static bfd_boolean |
| xtensa_xt_block_combine (xtensa_block_info *xt_block, |
| const xtensa_block_info *xt_block_2) |
| { |
| if (xt_block->sec != xt_block_2->sec) |
| return FALSE; |
| if (xt_block->offset + xt_block_aligned_size (xt_block) |
| != xt_block_2->offset) |
| return FALSE; |
| |
| if (xt_block_2->size == 0 |
| && (!xt_block_2->flags.is_unreachable |
| || xt_block->flags.is_unreachable)) |
| { |
| if (xt_block_2->flags.is_align |
| && xt_block->flags.is_align) |
| { |
| /* Nothing needed. */ |
| if (xt_block->flags.alignment >= xt_block_2->flags.alignment) |
| return TRUE; |
| } |
| else |
| { |
| if (xt_block_2->flags.is_align) |
| { |
| /* Push alignment to previous entry. */ |
| xt_block->flags.is_align = xt_block_2->flags.is_align; |
| xt_block->flags.alignment = xt_block_2->flags.alignment; |
| } |
| return TRUE; |
| } |
| } |
| if (!xtensa_frag_flags_combinable (&xt_block->flags, |
| &xt_block_2->flags)) |
| return FALSE; |
| |
| xt_block->size += xt_block_2->size; |
| |
| if (xt_block_2->flags.is_align) |
| { |
| xt_block->flags.is_align = TRUE; |
| xt_block->flags.alignment = xt_block_2->flags.alignment; |
| } |
| |
| return TRUE; |
| } |
| |
| |
| static void |
| add_xt_prop_frags (segT sec, |
| segT xt_block_sec, |
| xtensa_block_info **xt_block, |
| frag_flags_fn property_function) |
| { |
| segment_info_type *seg_info; |
| segment_info_type *xt_seg_info; |
| bfd_vma seg_offset; |
| fragS *fragP; |
| |
| xt_seg_info = retrieve_segment_info (xt_block_sec); |
| seg_info = retrieve_segment_info (sec); |
| /* Build it if needed. */ |
| while (*xt_block != NULL) |
| { |
| xt_block = &(*xt_block)->next; |
| } |
| /* We are either at NULL at the beginning or at the end. */ |
| |
| /* Walk through the frags. */ |
| seg_offset = 0; |
| |
| if (seg_info->frchainP) |
| { |
| for (fragP = seg_info->frchainP->frch_root; fragP; |
| fragP = fragP->fr_next) |
| { |
| xtensa_block_info tmp_block; |
| tmp_block.sec = sec; |
| tmp_block.offset = fragP->fr_address; |
| tmp_block.size = fragP->fr_fix; |
| tmp_block.next = NULL; |
| property_function (fragP, &tmp_block.flags); |
| |
| if (!xtensa_frag_flags_is_empty (&tmp_block.flags)) |
| /* && fragP->fr_fix != 0) */ |
| { |
| if ((*xt_block) == NULL |
| || !xtensa_xt_block_combine (*xt_block, &tmp_block)) |
| { |
| xtensa_block_info *new_block; |
| if ((*xt_block) != NULL) |
| xt_block = &(*xt_block)->next; |
| new_block = (xtensa_block_info *) |
| xmalloc (sizeof (xtensa_block_info)); |
| *new_block = tmp_block; |
| *xt_block = new_block; |
| } |
| } |
| } |
| } |
| } |
| |
| |
| /* op_placement_info_table */ |
| |
| /* op_placement_info makes it easier to determine which |
| ops can go in which slots. */ |
| |
| static void |
| init_op_placement_info_table (void) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_insnbuf ibuf = xtensa_insnbuf_alloc (isa); |
| xtensa_opcode opcode; |
| xtensa_format fmt; |
| int slot; |
| int num_opcodes = xtensa_isa_num_opcodes (isa); |
| |
| op_placement_table = (op_placement_info_table) |
| xmalloc (sizeof (op_placement_info) * num_opcodes); |
| assert (xtensa_isa_num_formats (isa) < MAX_FORMATS); |
| |
| for (opcode = 0; opcode < num_opcodes; opcode++) |
| { |
| op_placement_info *opi = &op_placement_table[opcode]; |
| /* FIXME: Make tinsn allocation dynamic. */ |
| if (xtensa_opcode_num_operands (isa, opcode) >= MAX_INSN_ARGS) |
| as_fatal (_("too many operands in instruction")); |
| opi->narrowest = XTENSA_UNDEFINED; |
| opi->narrowest_size = 0x7F; |
| opi->narrowest_slot = 0; |
| opi->formats = 0; |
| opi->num_formats = 0; |
| opi->issuef = 0; |
| for (fmt = 0; fmt < xtensa_isa_num_formats (isa); fmt++) |
| { |
| opi->slots[fmt] = 0; |
| for (slot = 0; slot < xtensa_format_num_slots (isa, fmt); slot++) |
| { |
| if (xtensa_opcode_encode (isa, fmt, slot, ibuf, opcode) == 0) |
| { |
| int fmt_length = xtensa_format_length (isa, fmt); |
| opi->issuef++; |
| set_bit (fmt, opi->formats); |
| set_bit (slot, opi->slots[fmt]); |
| if (fmt_length < opi->narrowest_size |
| || (fmt_length == opi->narrowest_size |
| && (xtensa_format_num_slots (isa, fmt) |
| < xtensa_format_num_slots (isa, |
| opi->narrowest)))) |
| { |
| opi->narrowest = fmt; |
| opi->narrowest_size = fmt_length; |
| opi->narrowest_slot = slot; |
| } |
| } |
| } |
| if (opi->formats) |
| opi->num_formats++; |
| } |
| } |
| xtensa_insnbuf_free (isa, ibuf); |
| } |
| |
| |
| bfd_boolean |
| opcode_fits_format_slot (xtensa_opcode opcode, xtensa_format fmt, int slot) |
| { |
| return bit_is_set (slot, op_placement_table[opcode].slots[fmt]); |
| } |
| |
| |
| /* If the opcode is available in a single slot format, return its size. */ |
| |
| static int |
| xg_get_single_size (xtensa_opcode opcode) |
| { |
| return op_placement_table[opcode].narrowest_size; |
| } |
| |
| |
| static xtensa_format |
| xg_get_single_format (xtensa_opcode opcode) |
| { |
| return op_placement_table[opcode].narrowest; |
| } |
| |
| |
| static int |
| xg_get_single_slot (xtensa_opcode opcode) |
| { |
| return op_placement_table[opcode].narrowest_slot; |
| } |
| |
| |
| /* Instruction Stack Functions (from "xtensa-istack.h"). */ |
| |
| void |
| istack_init (IStack *stack) |
| { |
| memset (stack, 0, sizeof (IStack)); |
| stack->ninsn = 0; |
| } |
| |
| |
| bfd_boolean |
| istack_empty (IStack *stack) |
| { |
| return (stack->ninsn == 0); |
| } |
| |
| |
| bfd_boolean |
| istack_full (IStack *stack) |
| { |
| return (stack->ninsn == MAX_ISTACK); |
| } |
| |
| |
| /* Return a pointer to the top IStack entry. |
| It is an error to call this if istack_empty () is TRUE. */ |
| |
| TInsn * |
| istack_top (IStack *stack) |
| { |
| int rec = stack->ninsn - 1; |
| assert (!istack_empty (stack)); |
| return &stack->insn[rec]; |
| } |
| |
| |
| /* Add a new TInsn to an IStack. |
| It is an error to call this if istack_full () is TRUE. */ |
| |
| void |
| istack_push (IStack *stack, TInsn *insn) |
| { |
| int rec = stack->ninsn; |
| assert (!istack_full (stack)); |
| stack->insn[rec] = *insn; |
| stack->ninsn++; |
| } |
| |
| |
| /* Clear space for the next TInsn on the IStack and return a pointer |
| to it. It is an error to call this if istack_full () is TRUE. */ |
| |
| TInsn * |
| istack_push_space (IStack *stack) |
| { |
| int rec = stack->ninsn; |
| TInsn *insn; |
| assert (!istack_full (stack)); |
| insn = &stack->insn[rec]; |
| memset (insn, 0, sizeof (TInsn)); |
| stack->ninsn++; |
| return insn; |
| } |
| |
| |
| /* Remove the last pushed instruction. It is an error to call this if |
| istack_empty () returns TRUE. */ |
| |
| void |
| istack_pop (IStack *stack) |
| { |
| int rec = stack->ninsn - 1; |
| assert (!istack_empty (stack)); |
| stack->ninsn--; |
| memset (&stack->insn[rec], 0, sizeof (TInsn)); |
| } |
| |
| |
| /* TInsn functions. */ |
| |
| void |
| tinsn_init (TInsn *dst) |
| { |
| memset (dst, 0, sizeof (TInsn)); |
| } |
| |
| |
| /* Get the ``num''th token of the TInsn. |
| It is illegal to call this if num > insn->ntoks. */ |
| |
| expressionS * |
| tinsn_get_tok (TInsn *insn, int num) |
| { |
| assert (num < insn->ntok); |
| return &insn->tok[num]; |
| } |
| |
| |
| /* Return TRUE if ANY of the operands in the insn are symbolic. */ |
| |
| static bfd_boolean |
| tinsn_has_symbolic_operands (const TInsn *insn) |
| { |
| int i; |
| int n = insn->ntok; |
| |
| assert (insn->insn_type == ITYPE_INSN); |
| |
| for (i = 0; i < n; ++i) |
| { |
| switch (insn->tok[i].X_op) |
| { |
| case O_register: |
| case O_constant: |
| break; |
| default: |
| return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| bfd_boolean |
| tinsn_has_invalid_symbolic_operands (const TInsn *insn) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| int i; |
| int n = insn->ntok; |
| |
| assert (insn->insn_type == ITYPE_INSN); |
| |
| for (i = 0; i < n; ++i) |
| { |
| switch (insn->tok[i].X_op) |
| { |
| case O_register: |
| case O_constant: |
| break; |
| case O_big: |
| case O_illegal: |
| case O_absent: |
| /* Errors for these types are caught later. */ |
| break; |
| case O_hi16: |
| case O_lo16: |
| default: |
| /* Symbolic immediates are only allowed on the last immediate |
| operand. At this time, CONST16 is the only opcode where we |
| support non-PC-relative relocations. */ |
| if (i != get_relaxable_immed (insn->opcode) |
| || (xtensa_operand_is_PCrelative (isa, insn->opcode, i) != 1 |
| && insn->opcode != xtensa_const16_opcode)) |
| { |
| as_bad (_("invalid symbolic operand")); |
| return TRUE; |
| } |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| /* For assembly code with complex expressions (e.g. subtraction), |
| we have to build them in the literal pool so that |
| their results are calculated correctly after relaxation. |
| The relaxation only handles expressions that |
| boil down to SYMBOL + OFFSET. */ |
| |
| static bfd_boolean |
| tinsn_has_complex_operands (const TInsn *insn) |
| { |
| int i; |
| int n = insn->ntok; |
| assert (insn->insn_type == ITYPE_INSN); |
| for (i = 0; i < n; ++i) |
| { |
| switch (insn->tok[i].X_op) |
| { |
| case O_register: |
| case O_constant: |
| case O_symbol: |
| case O_lo16: |
| case O_hi16: |
| break; |
| default: |
| return TRUE; |
| } |
| } |
| return FALSE; |
| } |
| |
| |
| /* Encode a TInsn opcode and its constant operands into slotbuf. |
| Return TRUE if there is a symbol in the immediate field. This |
| function assumes that: |
| 1) The number of operands are correct. |
| 2) The insn_type is ITYPE_INSN. |
| 3) The opcode can be encoded in the specified format and slot. |
| 4) Operands are either O_constant or O_symbol, and all constants fit. */ |
| |
| static bfd_boolean |
| tinsn_to_slotbuf (xtensa_format fmt, |
| int slot, |
| TInsn *tinsn, |
| xtensa_insnbuf slotbuf) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_opcode opcode = tinsn->opcode; |
| bfd_boolean has_fixup = FALSE; |
| int noperands = xtensa_opcode_num_operands (isa, opcode); |
| int i; |
| |
| assert (tinsn->insn_type == ITYPE_INSN); |
| if (noperands != tinsn->ntok) |
| as_fatal (_("operand number mismatch")); |
| |
| if (xtensa_opcode_encode (isa, fmt, slot, slotbuf, opcode)) |
| { |
| as_bad (_("cannot encode opcode \"%s\" in the given format \"%s\""), |
| xtensa_opcode_name (isa, opcode), xtensa_format_name (isa, fmt)); |
| return FALSE; |
| } |
| |
| for (i = 0; i < noperands; i++) |
| { |
| expressionS *expr = &tinsn->tok[i]; |
| int rc; |
| unsigned line; |
| char *file_name; |
| uint32 opnd_value; |
| |
| switch (expr->X_op) |
| { |
| case O_register: |
| if (xtensa_operand_is_visible (isa, opcode, i) == 0) |
| break; |
| /* The register number has already been checked in |
| expression_maybe_register, so we don't need to check here. */ |
| opnd_value = expr->X_add_number; |
| (void) xtensa_operand_encode (isa, opcode, i, &opnd_value); |
| rc = xtensa_operand_set_field (isa, opcode, i, fmt, slot, slotbuf, |
| opnd_value); |
| if (rc != 0) |
| as_warn (_("xtensa-isa failure: %s"), xtensa_isa_error_msg (isa)); |
| break; |
| |
| case O_constant: |
| if (xtensa_operand_is_visible (isa, opcode, i) == 0) |
| break; |
| as_where (&file_name, &line); |
| /* It is a constant and we called this function |
| then we have to try to fit it. */ |
| xtensa_insnbuf_set_operand (slotbuf, fmt, slot, opcode, i, |
| expr->X_add_number, file_name, line); |
| break; |
| |
| default: |
| has_fixup = TRUE; |
| break; |
| } |
| } |
| |
| return has_fixup; |
| } |
| |
| |
| /* Encode a single TInsn into an insnbuf. If the opcode can only be encoded |
| into a multi-slot instruction, fill the other slots with NOPs. |
| Return TRUE if there is a symbol in the immediate field. See also the |
| assumptions listed for tinsn_to_slotbuf. */ |
| |
| static bfd_boolean |
| tinsn_to_insnbuf (TInsn *tinsn, xtensa_insnbuf insnbuf) |
| { |
| static xtensa_insnbuf slotbuf = 0; |
| static vliw_insn vinsn; |
| xtensa_isa isa = xtensa_default_isa; |
| bfd_boolean has_fixup = FALSE; |
| int i; |
| |
| if (!slotbuf) |
| { |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| xg_init_vinsn (&vinsn); |
| } |
| |
| xg_clear_vinsn (&vinsn); |
| |
| bundle_tinsn (tinsn, &vinsn); |
| |
| xtensa_format_encode (isa, vinsn.format, insnbuf); |
| |
| for (i = 0; i < vinsn.num_slots; i++) |
| { |
| /* Only one slot may have a fix-up because the rest contains NOPs. */ |
| has_fixup |= |
| tinsn_to_slotbuf (vinsn.format, i, &vinsn.slots[i], vinsn.slotbuf[i]); |
| xtensa_format_set_slot (isa, vinsn.format, i, insnbuf, vinsn.slotbuf[i]); |
| } |
| |
| return has_fixup; |
| } |
| |
| |
| /* Check the instruction arguments. Return TRUE on failure. */ |
| |
| static bfd_boolean |
| tinsn_check_arguments (const TInsn *insn) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_opcode opcode = insn->opcode; |
| |
| if (opcode == XTENSA_UNDEFINED) |
| { |
| as_bad (_("invalid opcode")); |
| return TRUE; |
| } |
| |
| if (xtensa_opcode_num_operands (isa, opcode) > insn->ntok) |
| { |
| as_bad (_("too few operands")); |
| return TRUE; |
| } |
| |
| if (xtensa_opcode_num_operands (isa, opcode) < insn->ntok) |
| { |
| as_bad (_("too many operands")); |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| |
| /* Load an instruction from its encoded form. */ |
| |
| static void |
| tinsn_from_chars (TInsn *tinsn, char *f, int slot) |
| { |
| vliw_insn vinsn; |
| |
| xg_init_vinsn (&vinsn); |
| vinsn_from_chars (&vinsn, f); |
| |
| *tinsn = vinsn.slots[slot]; |
| xg_free_vinsn (&vinsn); |
| } |
| |
| |
| static void |
| tinsn_from_insnbuf (TInsn *tinsn, |
| xtensa_insnbuf slotbuf, |
| xtensa_format fmt, |
| int slot) |
| { |
| int i; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| /* Find the immed. */ |
| tinsn_init (tinsn); |
| tinsn->insn_type = ITYPE_INSN; |
| tinsn->is_specific_opcode = FALSE; /* must not be specific */ |
| tinsn->opcode = xtensa_opcode_decode (isa, fmt, slot, slotbuf); |
| tinsn->ntok = xtensa_opcode_num_operands (isa, tinsn->opcode); |
| for (i = 0; i < tinsn->ntok; i++) |
| { |
| set_expr_const (&tinsn->tok[i], |
| xtensa_insnbuf_get_operand (slotbuf, fmt, slot, |
| tinsn->opcode, i)); |
| } |
| } |
| |
| |
| /* Read the value of the relaxable immed from the fr_symbol and fr_offset. */ |
| |
| static void |
| tinsn_immed_from_frag (TInsn *tinsn, fragS *fragP, int slot) |
| { |
| xtensa_opcode opcode = tinsn->opcode; |
| int opnum; |
| |
| if (fragP->tc_frag_data.slot_symbols[slot]) |
| { |
| opnum = get_relaxable_immed (opcode); |
| assert (opnum >= 0); |
| set_expr_symbol_offset (&tinsn->tok[opnum], |
| fragP->tc_frag_data.slot_symbols[slot], |
| fragP->tc_frag_data.slot_offsets[slot]); |
| } |
| } |
| |
| |
| static int |
| get_num_stack_text_bytes (IStack *istack) |
| { |
| int i; |
| int text_bytes = 0; |
| |
| for (i = 0; i < istack->ninsn; i++) |
| { |
| TInsn *tinsn = &istack->insn[i]; |
| if (tinsn->insn_type == ITYPE_INSN) |
| text_bytes += xg_get_single_size (tinsn->opcode); |
| } |
| return text_bytes; |
| } |
| |
| |
| static int |
| get_num_stack_literal_bytes (IStack *istack) |
| { |
| int i; |
| int lit_bytes = 0; |
| |
| for (i = 0; i < istack->ninsn; i++) |
| { |
| TInsn *tinsn = &istack->insn[i]; |
| if (tinsn->insn_type == ITYPE_LITERAL && tinsn->ntok == 1) |
| lit_bytes += 4; |
| } |
| return lit_bytes; |
| } |
| |
| |
| /* vliw_insn functions. */ |
| |
| static void |
| xg_init_vinsn (vliw_insn *v) |
| { |
| int i; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| xg_clear_vinsn (v); |
| |
| v->insnbuf = xtensa_insnbuf_alloc (isa); |
| if (v->insnbuf == NULL) |
| as_fatal (_("out of memory")); |
| |
| for (i = 0; i < MAX_SLOTS; i++) |
| { |
| v->slotbuf[i] = xtensa_insnbuf_alloc (isa); |
| if (v->slotbuf[i] == NULL) |
| as_fatal (_("out of memory")); |
| } |
| } |
| |
| |
| static void |
| xg_clear_vinsn (vliw_insn *v) |
| { |
| int i; |
| |
| memset (v, 0, offsetof (vliw_insn, insnbuf)); |
| |
| v->format = XTENSA_UNDEFINED; |
| v->num_slots = 0; |
| v->inside_bundle = FALSE; |
| |
| if (xt_saved_debug_type != DEBUG_NONE) |
| debug_type = xt_saved_debug_type; |
| |
| for (i = 0; i < MAX_SLOTS; i++) |
| v->slots[i].opcode = XTENSA_UNDEFINED; |
| } |
| |
| |
| static bfd_boolean |
| vinsn_has_specific_opcodes (vliw_insn *v) |
| { |
| int i; |
| |
| for (i = 0; i < v->num_slots; i++) |
| { |
| if (v->slots[i].is_specific_opcode) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| |
| static void |
| xg_free_vinsn (vliw_insn *v) |
| { |
| int i; |
| xtensa_insnbuf_free (xtensa_default_isa, v->insnbuf); |
| for (i = 0; i < MAX_SLOTS; i++) |
| xtensa_insnbuf_free (xtensa_default_isa, v->slotbuf[i]); |
| } |
| |
| |
| /* Encode a vliw_insn into an insnbuf. Return TRUE if there are any symbolic |
| operands. See also the assumptions listed for tinsn_to_slotbuf. */ |
| |
| static bfd_boolean |
| vinsn_to_insnbuf (vliw_insn *vinsn, |
| char *frag_offset, |
| fragS *fragP, |
| bfd_boolean record_fixup) |
| { |
| xtensa_isa isa = xtensa_default_isa; |
| xtensa_format fmt = vinsn->format; |
| xtensa_insnbuf insnbuf = vinsn->insnbuf; |
| int slot; |
| bfd_boolean has_fixup = FALSE; |
| |
| xtensa_format_encode (isa, fmt, insnbuf); |
| |
| for (slot = 0; slot < vinsn->num_slots; slot++) |
| { |
| TInsn *tinsn = &vinsn->slots[slot]; |
| bfd_boolean tinsn_has_fixup = |
| tinsn_to_slotbuf (vinsn->format, slot, tinsn, |
| vinsn->slotbuf[slot]); |
| |
| xtensa_format_set_slot (isa, fmt, slot, |
| insnbuf, vinsn->slotbuf[slot]); |
| if (tinsn_has_fixup) |
| { |
| int i; |
| xtensa_opcode opcode = tinsn->opcode; |
| int noperands = xtensa_opcode_num_operands (isa, opcode); |
| has_fixup = TRUE; |
| |
| for (i = 0; i < noperands; i++) |
| { |
| expressionS* expr = &tinsn->tok[i]; |
| switch (expr->X_op) |
| { |
| case O_symbol: |
| case O_lo16: |
| case O_hi16: |
| if (get_relaxable_immed (opcode) == i) |
| { |
| /* Add a fix record for the instruction, except if this |
| function is being called prior to relaxation, i.e., |
| if record_fixup is false, and the instruction might |
| be relaxed later. */ |
| if (record_fixup |
| || tinsn->is_specific_opcode |
| || !xg_is_relaxable_insn (tinsn, 0)) |
| { |
| xg_add_opcode_fix (tinsn, i, fmt, slot, expr, fragP, |
| frag_offset - fragP->fr_literal); |
| } |
| else |
| { |
| if (expr->X_op != O_symbol) |
| as_bad (_("invalid operand")); |
| tinsn->symbol = expr->X_add_symbol; |
| tinsn->offset = expr->X_add_number; |
| } |
| } |
| else |
| as_bad (_("symbolic operand not allowed")); |
| break; |
| |
| case O_constant: |
| case O_register: |
| break; |
| |
| default: |
| as_bad (_("expression too complex")); |
| break; |
| } |
| } |
| } |
| } |
| |
| return has_fixup; |
| } |
| |
| |
| static void |
| vinsn_from_chars (vliw_insn *vinsn, char *f) |
| { |
| static xtensa_insnbuf insnbuf = NULL; |
| static xtensa_insnbuf slotbuf = NULL; |
| int i; |
| xtensa_format fmt; |
| xtensa_isa isa = xtensa_default_isa; |
| |
| if (!insnbuf) |
| { |
| insnbuf = xtensa_insnbuf_alloc (isa); |
| slotbuf = xtensa_insnbuf_alloc (isa); |
| } |
| |
| xtensa_insnbuf_from_chars (isa, insnbuf, (unsigned char *) f, 0); |
| fmt = xtensa_format_decode (isa, insnbuf); |
| if (fmt == XTENSA_UNDEFINED) |
| as_fatal (_("cannot decode instruction format")); |
| vinsn->format = fmt; |
| vinsn->num_slots = xtensa_format_num_slots (isa, fmt); |
| |
| for (i = 0; i < vinsn->num_slots; i++) |
| { |
| TInsn *tinsn = &vinsn->slots[i]; |
| xtensa_format_get_slot (isa, fmt, i, insnbuf, slotbuf); |
| tinsn_from_insnbuf (tinsn, slotbuf, fmt, i); |
| } |
| } |
| |
| |
| /* Expression utilities. */ |
| |
| /* Return TRUE if the expression is an integer constant. */ |
| |
| bfd_boolean |
| expr_is_const (const expressionS *s) |
| { |
| return (s->X_op == O_constant); |
| } |
| |
| |
| /* Get the expression constant. |
| Calling this is illegal if expr_is_const () returns TRUE. */ |
| |
| offsetT |
| get_expr_const (const expressionS *s) |
| { |
| assert (expr_is_const (s)); |
| return s->X_add_number; |
| } |
| |
| |
| /* Set the expression to a constant value. */ |
| |
| void |
| set_expr_const (expressionS *s, offsetT val) |
| { |
| s->X_op = O_constant; |
| s->X_add_number = val; |
| s->X_add_symbol = NULL; |
| s->X_op_symbol = NULL; |
| } |
| |
| |
| bfd_boolean |
| expr_is_register (const expressionS *s) |
| { |
| return (s->X_op == O_register); |
| } |
| |
| |
| /* Get the expression constant. |
| Calling this is illegal if expr_is_const () returns TRUE. */ |
| |
| offsetT |
| get_expr_register (const expressionS *s) |
| { |
| assert (expr_is_register (s)); |
| return s->X_add_number; |
| } |
| |
| |
| /* Set the expression to a symbol + constant offset. */ |
| |
| void |
| set_expr_symbol_offset (expressionS *s, symbolS *sym, offsetT offset) |
| { |
| s->X_op = O_symbol; |
| s->X_add_symbol = sym; |
| s->X_op_symbol = NULL; /* unused */ |
| s->X_add_number = offset; |
| } |
| |
| |
| /* Return TRUE if the two expressions are equal. */ |
| |
| bfd_boolean |
| expr_is_equal (expressionS *s1, expressionS *s2) |
| { |
| if (s1->X_op != s2->X_op) |
| return FALSE; |
| if (s1->X_add_symbol != s2->X_add_symbol) |
| return FALSE; |
| if (s1->X_op_symbol != s2->X_op_symbol) |
| return FALSE; |
| if (s1->X_add_number != s2->X_add_number) |
| return FALSE; |
| return TRUE; |
| } |
| |
| |
| static void |
| copy_expr (expressionS *dst, const expressionS *src) |
| { |
| memcpy (dst, src, sizeof (expressionS)); |
| } |
| |
| |
| /* Support for the "--rename-section" option. */ |
| |
| struct rename_section_struct |
| { |
| char *old_name; |
| char *new_name; |
| struct rename_section_struct *next; |
| }; |
| |
| static struct rename_section_struct *section_rename; |
| |
| |
| /* Parse the string "oldname=new_name(:oldname2=new_name2)*" and add |
| entries to the section_rename list. Note: Specifying multiple |
| renamings separated by colons is not documented and is retained only |
| for backward compatibility. */ |
| |
| static void |
| build_section_rename (const char *arg) |
| { |
| struct rename_section_struct *r; |
| char *this_arg = NULL; |
| char *next_arg = NULL; |
| |
| for (this_arg = xstrdup (arg); this_arg != NULL; this_arg = next_arg) |
| { |
| char *old_name, *new_name; |
| |
| if (this_arg) |
| { |
| next_arg = strchr (this_arg, ':'); |
| if (next_arg) |
| { |
| *next_arg = '\0'; |
| next_arg++; |
| } |
| } |
| |
| old_name = this_arg; |
| new_name = strchr (this_arg, '='); |
| |
| if (*old_name == '\0') |
| { |
| as_warn (_("ignoring extra '-rename-section' delimiter ':'")); |
| continue; |
| } |
| if (!new_name || new_name[1] == '\0') |
| { |
| as_warn (_("ignoring invalid '-rename-section' specification: '%s'"), |
| old_name); |
| continue; |
| } |
| *new_name = '\0'; |
| new_name++; |
| |
| /* Check for invalid section renaming. */ |
| for (r = section_rename; r != NULL; r = r->next) |
| { |
| if (strcmp (r->old_name, old_name) == 0) |
| as_bad (_("section %s renamed multiple times"), old_name); |
| if (strcmp (r->new_name, new_name) == 0) |
| as_bad (_("multiple sections remapped to output section %s"), |
| new_name); |
| } |
| |
| /* Now add it. */ |
| r = (struct rename_section_struct *) |
| xmalloc (sizeof (struct rename_section_struct)); |
| r->old_name = xstrdup (old_name); |
| r->new_name = xstrdup (new_name); |
| r->next = section_rename; |
| section_rename = r; |
| } |
| } |
| |
| |
| char * |
| xtensa_section_rename (char *name) |
| { |
| struct rename_section_struct *r = section_rename; |
| |
| for (r = section_rename; r != NULL; r = r->next) |
| { |
| if (strcmp (r->old_name, name) == 0) |
| return r->new_name; |
| } |
| |
| return name; |
| } |