| # Copyright (C) 1993-2017 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-dejagnu@prep.ai.mit.edu |
| |
| # This file was written by Rob Savoye <rob@cygnus.com> |
| # and extended by Ian Lance Taylor <ian@cygnus.com> |
| |
| proc load_common_lib { name } { |
| load_lib $name |
| } |
| |
| load_common_lib binutils-common.exp |
| |
| proc binutil_version { prog } { |
| if ![is_remote host] { |
| set path [which $prog] |
| if {$path == 0} then { |
| perror "$prog can't be run, file not found." |
| return "" |
| } |
| } else { |
| set path $prog |
| } |
| set state [remote_exec host $prog --version] |
| set tmp "[lindex $state 1]\n" |
| # Should find a way to discard constant parts, keep whatever's |
| # left, so the version string could be almost anything at all... |
| regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" "$tmp" version cyg number |
| if ![info exists number] then { |
| return "$path (no version number)\n" |
| } |
| return "$path $number\n" |
| } |
| |
| # |
| # default_binutils_run |
| # run a program, returning the output |
| # sets binutils_run_failed if the program does not exist |
| # |
| proc default_binutils_run { prog progargs } { |
| global binutils_run_failed |
| global host_triplet |
| |
| set binutils_run_failed 0 |
| |
| if ![is_remote host] { |
| if {[which $prog] == 0} then { |
| perror "$prog does not exist" |
| set binutils_run_failed 1 |
| return "" |
| } |
| } |
| |
| # For objdump, automatically translate standard section |
| # names to the targets one, if they are different. |
| set sect_names [get_standard_section_names] |
| if { $sect_names != "" && [string match "*objdump" $prog] } { |
| regsub -- "-j \\.text" $progargs "-j [lindex $sect_names 0]" progargs |
| regsub -- "-j \\.data" $progargs "-j [lindex $sect_names 1]" progargs |
| regsub -- "-j \\.bss" $progargs "-j [lindex $sect_names 2]" progargs |
| } |
| |
| send_log "$prog $progargs\n" |
| verbose "$prog $progargs" |
| |
| # Gotta quote dollar-signs because they get mangled by the |
| # shell otherwise. |
| regsub -all "\\$" "$progargs" "\\$" progargs |
| |
| set state [remote_exec host $prog $progargs] |
| set exec_output [prune_warnings [lindex $state 1]] |
| if {![string match "" $exec_output]} then { |
| send_log "$exec_output\n" |
| verbose "$exec_output" |
| } else { |
| if { [lindex $state 0] != 0 } { |
| set exec_output "$prog exited with status [lindex $state 0]" |
| send_log "$exec_output\n" |
| verbose "$exec_output" |
| } |
| } |
| return $exec_output |
| } |
| |
| # |
| # default_binutils_assemble_flags |
| # assemble a file |
| # |
| proc default_binutils_assemble_flags { source object asflags } { |
| global srcdir |
| global host_triplet |
| |
| # The HPPA assembler syntax is a little different than most, to make |
| # the test source file assemble we need to run it through sed. |
| # |
| # This is a hack in that it won't scale well if other targets need |
| # similar transformations to assemble. We'll generalize the hack |
| # if/when other targets need similar handling. |
| if { [istarget "hppa*-*-*"] && ![istarget "*-*-linux*" ] } then { |
| set sed_file $srcdir/config/hppa.sed |
| send_log "sed -f $sed_file < $source > asm.s\n" |
| verbose "sed -f $sed_file < $source > asm.s" |
| catch "exec sed -f $sed_file < $source > asm.s" |
| set source asm.s |
| } |
| |
| set exec_output [target_assemble $source $object $asflags] |
| set exec_output [prune_warnings $exec_output] |
| |
| if [string match "" $exec_output] { |
| return 1 |
| } else { |
| send_log "$exec_output\n" |
| verbose "$exec_output" |
| perror "$source: assembly failed" |
| return 0 |
| } |
| } |
| |
| # |
| # exe_ext |
| # Returns target executable extension, if any. |
| # |
| proc exe_ext {} { |
| if { [istarget *-*-mingw*] || [istarget *-*-cygwin*] } { |
| return ".exe" |
| } else { |
| return "" |
| } |
| } |
| |
| # Copied and modified from gas. |
| |
| # run_dump_test FILE (optional:) EXTRA_OPTIONS |
| # |
| # Assemble a .s file, then run some utility on it and check the output. |
| # |
| # There should be an assembly language file named FILE.s in the test |
| # suite directory, and a pattern file called FILE.d. `run_dump_test' |
| # will assemble FILE.s, run some tool like `objdump', `objcopy', or |
| # `nm' on the .o file to produce textual output, and then analyze that |
| # with regexps. The FILE.d file specifies what program to run, and |
| # what to expect in its output. |
| # |
| # The FILE.d file begins with zero or more option lines, which specify |
| # flags to pass to the assembler, the program to run to dump the |
| # assembler's output, and the options it wants. The option lines have |
| # the syntax: |
| # |
| # # OPTION: VALUE |
| # |
| # OPTION is the name of some option, like "name" or "objdump", and |
| # VALUE is OPTION's value. The valid options are described below. |
| # Whitespace is ignored everywhere, except within VALUE. The option |
| # list ends with the first line that doesn't match the above syntax. |
| # However, a line within the options that begins with a #, but doesn't |
| # have a recognizable option name followed by a colon, is considered a |
| # comment and entirely ignored. |
| # |
| # The optional EXTRA_OPTIONS argument to `run_dump_test' is a list of |
| # two-element lists. The first element of each is an option name, and |
| # the second additional arguments to be added on to the end of the |
| # option list as given in FILE.d. (If omitted, no additional options |
| # are added.) |
| # |
| # The interesting options are: |
| # |
| # name: TEST-NAME |
| # The name of this test, passed to DejaGNU's `pass' and `fail' |
| # commands. If omitted, this defaults to FILE, the root of the |
| # .s and .d files' names. |
| # |
| # as: FLAGS |
| # When assembling FILE.s, pass FLAGS to the assembler. |
| # |
| # PROG: PROGRAM-NAME |
| # The name of the program to run to modify or analyze the .o file |
| # produced by the assembler. This option is required. Recognised |
| # names are: ar, elfedit, nm, objcopy, ranlib, strings, and strip. |
| # |
| # DUMPPROG: PROGRAM-NAME |
| # The name of the program to run to analyze the .o file after it has |
| # has been modified by PROG. This can be omitted; run_dump_test will |
| # guess which program to run by seeing if any of the flags options |
| # for the recognised dump programs are set. Recognised names are: |
| # addr2line, nm, objdump, readelf and size. |
| # |
| # nm: FLAGS |
| # objcopy: FLAGS |
| # objdump: FLAGS |
| # readelf: FLAGS |
| # size: FLAGS |
| # Use the specified program to analyze the .o file, and pass it |
| # FLAGS, in addition to the .o file name. Note that they are run |
| # with LC_ALL=C in the environment to give consistent sorting |
| # of symbols. |
| # |
| # source: SOURCE |
| # Assemble the file SOURCE.s. If omitted, this defaults to FILE.s. |
| # This is useful if several .d files want to share a .s file. |
| # |
| # dump: DUMP |
| # Match against DUMP.d. If omitted, this defaults to FILE.d. This |
| # is useful if several .d files differ by options only. Options are |
| # always read from FILE.d. |
| # |
| # target: GLOBS... |
| # Run this test only on a specified list of targets. More precisely, |
| # each glob in the space-separated list is passed to "istarget"; if |
| # it evaluates true for any of them, the test will be run, otherwise |
| # it will be marked unsupported. |
| # |
| # not-target: GLOBS... |
| # Do not run this test on a specified list of targets. Again, |
| # the each glob in the space-separated list is passed to |
| # "istarget", and the test is run if it evaluates *false* for |
| # *all* of them. Otherwise it will be marked unsupported. |
| # |
| # skip: GLOBS... |
| # not-skip: GLOBS... |
| # These are exactly the same as "not-target" and "target", |
| # respectively, except that they do nothing at all if the check |
| # fails. They should only be used in groups, to construct a single |
| # test which is run on all targets but with variant options or |
| # expected output on some targets. (For example, see |
| # gas/arm/inst.d and gas/arm/wince_inst.d.) |
| # |
| # error: REGEX |
| # An error with message matching REGEX must be emitted for the test |
| # to pass. The PROG, objdump, nm and objcopy options have no |
| # meaning and need not supplied if this is present. |
| # |
| # warning: REGEX |
| # Expect a gas warning matching REGEX. It is an error to issue |
| # both "error" and "warning". |
| # |
| # stderr: FILE |
| # FILE contains regexp lines to be matched against the diagnostic |
| # output of the assembler. This does not preclude the use of |
| # PROG, nm, objdump, or objcopy. |
| # |
| # error-output: FILE |
| # Means the same as 'stderr', but also indicates that the assembler |
| # is expected to exit unsuccessfully (therefore PROG, objdump, nm, |
| # and objcopy have no meaning and should not be supplied). |
| # |
| # Each option may occur at most once. |
| # |
| # After the option lines come regexp lines. `run_dump_test' calls |
| # `regexp_diff' to compare the output of the dumping tool against the |
| # regexps in FILE.d. `regexp_diff' is defined in binutils-common.exp; |
| # see further comments there. |
| |
| proc run_dump_test { name {extra_options {}} } { |
| global subdir srcdir |
| global OBJDUMP NM OBJCOPY READELF STRIP |
| global OBJDUMPFLAGS NMFLAGS OBJCOPYFLAGS READELFFLAGS STRIPFLAGS |
| global ELFEDIT ELFEDITFLAGS |
| global host_triplet |
| global env |
| global copyfile |
| global tempfile |
| |
| if [string match "*/*" $name] { |
| set file $name |
| set name [file tail $name] |
| } else { |
| set file "$srcdir/$subdir/$name" |
| } |
| set opt_array [slurp_options "${file}.d"] |
| if { $opt_array == -1 } { |
| perror "error reading options from $file.d" |
| unresolved $subdir/$name |
| return |
| } |
| set opts(addr2line) {} |
| set opts(ar) {} |
| set opts(as) {} |
| set opts(elfedit) {} |
| set opts(name) {} |
| set opts(nm) {} |
| set opts(objcopy) {} |
| set opts(objdump) {} |
| set opts(ranlib) {} |
| set opts(readelf) {} |
| set opts(size) {} |
| set opts(strings) {} |
| set opts(strip) {} |
| set opts(PROG) {} |
| set opts(DUMPPROG) {} |
| set opts(source) {} |
| set opts(dump) {} |
| set opts(target) {} |
| set opts(not-target) {} |
| set opts(skip) {} |
| set opts(not-skip) {} |
| |
| foreach i $opt_array { |
| set opt_name [lindex $i 0] |
| set opt_val [lindex $i 1] |
| if ![info exists opts($opt_name)] { |
| perror "unknown option $opt_name in file $file.d" |
| unresolved $subdir/$name |
| return |
| } |
| |
| # Permit the option to use $srcdir to refer to the source |
| # directory. |
| regsub -all "\\\$srcdir" "$opt_val" "$srcdir/$subdir" opt_val |
| |
| if [string length $opts($opt_name)] { |
| perror "option $opt_name multiply set in $file.d" |
| unresolved $subdir/$name |
| return |
| } |
| set opts($opt_name) $opt_val |
| } |
| |
| foreach i $extra_options { |
| set opt_name [lindex $i 0] |
| set opt_val [lindex $i 1] |
| if ![info exists opts($opt_name)] { |
| perror "unknown option $opt_name given in extra_opts" |
| unresolved $subdir/$name |
| return |
| } |
| |
| # Permit the option to use $srcdir to refer to the source |
| # directory. |
| regsub -all "\\\$srcdir" "$opt_val" "$srcdir/$subdir" opt_val |
| |
| # add extra option to end of existing option, adding space |
| # if necessary. |
| if [string length $opts($opt_name)] { |
| append opts($opt_name) " " |
| } |
| append opts($opt_name) $opt_val |
| } |
| |
| if { $opts(name) == "" } { |
| set testname "$subdir/$name" |
| } else { |
| set testname $opts(name) |
| } |
| verbose "Testing $testname" |
| |
| if {$opts(PROG) == ""} { |
| perror "PROG isn't set in $file.d" |
| unresolved $testname |
| return |
| } |
| |
| set destopt "" |
| switch -- $opts(PROG) { |
| ar { set program ar } |
| elfedit { set program elfedit } |
| nm { set program nm } |
| objcopy { set program objcopy } |
| ranlib { set program ranlib } |
| strings { set program strings } |
| strip { |
| set program strip |
| set destopt "-o" |
| } |
| default { |
| perror "unrecognized program option $opts(PROG) in $file.d" |
| unresolved $testname |
| return } |
| } |
| |
| set dumpprogram "" |
| if { $opts(DUMPPROG) != "" } { |
| switch -- $opts(DUMPPROG) { |
| addr2line { set dumpprogram addr2line } |
| nm { set dumpprogram nm } |
| objdump { set dumpprogram objdump } |
| readelf { set dumpprogram readelf } |
| size { set dumpprogram size } |
| default { |
| perror "unrecognized dump program option $opts(DUMPPROG) in $file.d" |
| unresolved $testname |
| return } |
| } |
| } else { |
| # Guess which program to run, by seeing which option was specified. |
| foreach p {addr2line nm objdump readelf size} { |
| if {$opts($p) != ""} { |
| if {$dumpprogram != ""} { |
| perror "more than one possible dump program specified in $file.d" |
| unresolved $testname |
| return |
| } else { |
| set dumpprogram $p |
| } |
| } |
| } |
| } |
| |
| # Handle skipping the test on specified targets. |
| # You can have both skip/not-skip and target/not-target, but you can't |
| # have both skip and not-skip, or target and not-target, in the same file. |
| if { $opts(skip) != "" } then { |
| if { $opts(not-skip) != "" } then { |
| perror "$testname: mixing skip and not-skip directives is invalid" |
| unresolved $testname |
| return |
| } |
| foreach glob $opts(skip) { |
| if {[istarget $glob]} { return } |
| } |
| } |
| if { $opts(not-skip) != "" } then { |
| set skip 1 |
| foreach glob $opts(not-skip) { |
| if {[istarget $glob]} { |
| set skip 0 |
| break |
| } |
| } |
| if {$skip} { return } |
| } |
| if { $opts(target) != "" } then { |
| set skip 1 |
| foreach glob $opts(target) { |
| if {[istarget $glob]} { |
| set skip 0 |
| break |
| } |
| } |
| if {$skip} { |
| unsupported $testname |
| return |
| } |
| } |
| if { $opts(not-target) != "" } then { |
| foreach glob $opts(not-target) { |
| if {[istarget $glob]} { |
| unsupported $testname |
| return |
| } |
| } |
| } |
| |
| if { $opts(source) == "" } { |
| set srcfile ${file}.s |
| } else { |
| set srcfile $srcdir/$subdir/$opts(source) |
| } |
| |
| if { $opts(dump) == "" } { |
| set dumpfile ${file}.d |
| } else { |
| set dumpfile $srcdir/$subdir/$opts(dump) |
| } |
| |
| if { $opts(as) == "binary" } { |
| while {[file type $srcfile] eq "link"} { |
| set newfile [file readlink $srcfile] |
| if {[string index $newfile 0] ne "/"} { |
| set newfile [file dirname $srcfile]/$newfile |
| } |
| set srcfile $newfile |
| } |
| # Make sure we copy the file if we are doing remote host testing. |
| remote_download host ${srcfile} $tempfile |
| } else { |
| set exec_output [binutils_assemble_flags ${srcfile} $tempfile $opts(as)] |
| if [string match "" $exec_output] then { |
| send_log "$exec_output\n" |
| verbose "$exec_output" |
| fail $testname |
| return |
| } |
| } |
| |
| set progopts1 $opts($program) |
| eval set progopts \$[string toupper $program]FLAGS |
| eval set binary \$[string toupper $program] |
| |
| set exec_output [binutils_run $binary "$progopts $progopts1 $tempfile $destopt ${copyfile}.o"] |
| if ![string match "" $exec_output] { |
| send_log "$exec_output\n" |
| verbose "$exec_output" |
| fail $testname |
| return |
| } |
| |
| set progopts1 $opts($dumpprogram) |
| eval set progopts \$[string toupper $dumpprogram]FLAGS |
| eval set binary \$[string toupper $dumpprogram] |
| |
| if { ![is_remote host] && [which $binary] == 0 } { |
| untested $testname |
| return |
| } |
| |
| # For objdump, automatically translate standard section names to the targets one, |
| # if they are different. |
| set sect_names [get_standard_section_names] |
| if { $sect_names != "" && $dumpprogram == "objdump"} { |
| regsub -- "-j \\.text" $progopts1 "-j [lindex $sect_names 0]" progopts1 |
| regsub -- "-j \\.data" $progopts1 "-j [lindex $sect_names 1]" progopts1 |
| regsub -- "-j \\.bss" $progopts1 "-j [lindex $sect_names 2]" progopts1 |
| } |
| |
| verbose "running $binary $progopts $progopts1" 3 |
| |
| set cmd "$binary $progopts $progopts1 ${copyfile}.o" |
| |
| # Ensure consistent sorting of symbols |
| if {[info exists env(LC_ALL)]} { |
| set old_lc_all $env(LC_ALL) |
| } |
| set env(LC_ALL) "C" |
| send_log "$cmd\n" |
| set comp_output [remote_exec host $cmd "" "/dev/null" "tmpdir/dump.out"] |
| if {[info exists old_lc_all]} { |
| set env(LC_ALL) $old_lc_all |
| } else { |
| unset env(LC_ALL) |
| } |
| if { [lindex $comp_output 0] != 0 } then { |
| send_log "$comp_output\n" |
| fail $testname |
| return |
| } |
| set comp_output [prune_warnings [lindex $comp_output 1]] |
| if ![string match "" $comp_output] then { |
| send_log "$comp_output\n" |
| fail $testname |
| return |
| } |
| |
| verbose_eval {[file_contents "tmpdir/dump.out"]} 3 |
| if { [regexp_diff "tmpdir/dump.out" "${dumpfile}"] } then { |
| fail $testname |
| verbose "output is [file_contents "tmpdir/dump.out"]" 2 |
| return |
| } |
| |
| pass $testname |
| } |
| |
| proc slurp_options { file } { |
| if [catch { set f [open $file r] } x] { |
| #perror "couldn't open `$file': $x" |
| perror "$x" |
| return -1 |
| } |
| set opt_array {} |
| # whitespace expression |
| set ws {[ ]*} |
| set nws {[^ ]*} |
| # whitespace is ignored anywhere except within the options list; |
| # option names are alphabetic plus dash |
| set pat "^#${ws}(\[a-zA-Z-\]*)$ws:${ws}(.*)$ws\$" |
| while { [gets $f line] != -1 } { |
| set line [string trim $line] |
| # Whitespace here is space-tab. |
| if [regexp $pat $line xxx opt_name opt_val] { |
| # match! |
| lappend opt_array [list $opt_name $opt_val] |
| } elseif {![regexp "^#" $line ]} { |
| break |
| } |
| } |
| close $f |
| return $opt_array |
| } |
| |
| proc file_contents { filename } { |
| set file [open $filename r] |
| set contents [read $file] |
| close $file |
| return $contents |
| } |
| |
| proc verbose_eval { expr { level 1 } } { |
| global verbose |
| if $verbose>$level then { eval verbose "$expr" $level } |
| } |
| |
| # Internal procedure: return the names of the standard sections |
| # |
| proc get_standard_section_names {} { |
| if [istarget "rx-*-*"] { |
| return { "P" "D_1" "B_1" } |
| } |
| if [istarget "alpha*-*-*vms*"] { |
| # Double quote: for TCL and for sh. |
| return { "\\\$CODE\\\$" "\\\$DATA\\\$" "\\\$BSS\\\$" } |
| } |
| return |
| } |