| 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * python/python-internal.h (Py_hash_t): Define it for Python <3.2. |
| * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the |
| return type. |
| |
| 2015-02-04 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (handle_extended_wait): Don't resume LWPs here. |
| (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait |
| returns true. |
| (resume_stopped_resumed_lwps): Don't check whether the thread is |
| marked as executing. |
| (linux_nat_wait_1): Use resume_stopped_resumed_lwps. |
| |
| 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| |
| * regset.h (struct regset): Add flags field. |
| (REGSET_VARIABLE_SIZE): New value for a regset's flags field. |
| * corelow.c (get_core_register_section): Add warning if the size |
| exceeds the requested size and the regset does not have the |
| REGSET_VARIABLE_SIZE flag set. |
| * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE |
| flag. |
| * armbsd-tdep.c (armbsd_gregset): Likewise. |
| * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise. |
| * hppaobsd-tdep.c (hppaobsd_gregset): Likewise. |
| * m68kbsd-tdep.c (m68kbsd_gregset): Likewise. |
| * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise. |
| |
| 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| |
| * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections): |
| For ".reg-xstate", explicitly specify the requested section size |
| via X86_XSTATE_SIZE instead of just 0 on input and |
| X86_XSTATE_MAX_SIZE on output. |
| * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): |
| Likewise. |
| |
| 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| |
| PR corefiles/17808: |
| * gdbarch.sh (iterate_over_regset_sections_cb): Document this |
| function type, particularly its SIZE parameter. |
| * gdbarch.h: Regenerate. |
| * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare |
| actual against required size using ">=" instead of "==". |
| (amd64_collect_fpregset): Likewise. |
| * i386-tdep.c (i386_supply_gregset): Likewise. |
| (i386_collect_gregset): Likewise. |
| (i386_supply_fpregset): Likewise. |
| (i386_collect_fpregset): Likewise. |
| * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise. |
| (mips_fill_gregset_wrapper): Likewise. |
| (mips_supply_fpregset_wrapper): Likewise. |
| (mips_fill_fpregset_wrapper): Likewise. |
| (mips64_supply_gregset_wrapper): Likewise. |
| (mips64_fill_gregset_wrapper): Likewise. |
| (mips64_supply_fpregset_wrapper): Likewise. |
| (mips64_fill_fpregset_wrapper): Likewise. |
| * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise. |
| (am33_supply_fpregset_method): Likewise. |
| (am33_collect_gregset_method): Likewise. |
| (am33_collect_fpregset_method): Likewise. |
| |
| 2015-02-04 Doug Evans <dje@google.com> |
| Pedro Alves <palves@redhat.com> |
| Eli Zaretskii <eliz@gnu.org> |
| |
| PR tui/17810 |
| * tui/tui-command.c (tui_refresh_cmd_win): New function. |
| * tui/tui-command.c (tui_refresh_cmd_win): Declare. |
| * tui/tui-file.c: #include tui/tui-command.h. |
| (tui_file_fputs): Refresh command window if stream is not gdb_stdout. |
| (tui_file_flush): Refresh command window if stream is gdb_stdout. |
| * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush. |
| |
| 2015-02-04 Pedro Alves <palves@redhat.com> |
| |
| Fix build breakage. |
| * event-loop.c (gdb_do_one_event): Add default switch case. |
| |
| 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Filter out inferior gcc option -fpreprocessed. |
| * compile/compile.c (filter_args): New function. |
| (get_args): Use it. |
| |
| 2015-02-03 Pedro Alves <palves@redhat.com> |
| |
| * event-loop.c: Don't declare nor define a queue type for |
| gdb_event_p. |
| (event_queue): Delete. |
| (create_event, create_file_event, gdb_event_xfree) |
| (initialize_event_loop, process_event): Delete. |
| (gdb_do_one_event): Return as soon as one event is handled. |
| (handle_file_event): Change prototype. Used the passed in |
| file_handler pointer and ready_mask instead of looping over all |
| file handlers. |
| (gdb_wait_for_event): Update the poll/select timeouts before |
| blocking. Run event handlers directly instead of queueing events. |
| Return as soon as one event is handled. |
| (struct async_event_handler_data): Delete. |
| (invoke_async_event_handler): Delete. |
| (check_async_event_handlers): Change return type to int. Run |
| event handlers directly instead of queueing events. Return as |
| soon as one event is handled. |
| (handle_timer_event): Delete. |
| (update_wait_timeout): New function, factored out from |
| poll_timers. |
| (poll_timers): Reimplement. |
| * event-loop.h (initialize_event_loop): Delete declaration. |
| * top.c (gdb_init): Don't call initialize_event_loop. |
| |
| 2015-02-03 Pedro Alves <palves@redhat.com> |
| |
| * event-loop.c (clear_async_event_handler): New function. |
| * event-loop.h (clear_async_event_handler): New declaration. |
| * record-btrace.c (record_btrace_async): New function. |
| (init_record_btrace_ops): Install record_btrace_async. |
| * record-full.c (record_full_async): New function. |
| (record_full_resume): Don't mark the async event source here. |
| (init_record_full_ops): Install record_full_async. |
| (record_full_core_resume): Don't mark the async event source here. |
| (init_record_full_core_ops): Install record_full_async. |
| * remote.c (remote_async): Mark and clear the async stop reply |
| queue event-loop token as appropriate. |
| |
| 2015-02-03 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use |
| target_is_async_p instead of target_can_async. |
| (linux_nat_wait): Use target_is_async_p instead of |
| target_can_async. Don't enable async here. |
| * remote.c (interrupt_query, remote_wait, putpkt_binary): Use |
| target_is_async_p instead of target_can_async. |
| |
| 2015-02-02 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * varobj.h (lang_varobj_ops): Mention which return values need |
| to be freed. |
| |
| 2015-02-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker. |
| |
| 2015-02-02 Joel Brobecker <brobecker@adacore.com> |
| |
| PR gdb/17856: |
| * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache |
| results found in the cache. |
| |
| 2015-02-02 Joel Brobecker <brobecker@adacore.com> |
| |
| PR gdb/17854: |
| * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache |
| when allocating a new one. |
| |
| 2015-02-01 Tom Tromey <tom@tromey.com> |
| |
| * MAINTAINERS: Remove myself. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * dwarf2read.c (process_structure_scope): Update setting of |
| TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO. |
| * gdbtypes.c (internal_type_vptr_fieldno): New function. |
| (set_type_vptr_fieldno): New function. |
| (internal_type_vptr_basetype): New function. |
| (set_type_vptr_basetype): New function. |
| (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO, |
| TYPE_VPTR_BASETYPE. |
| (allocate_cplus_struct_type): Initialize vptr_fieldno. |
| (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ... |
| (print_cplus_stuff): ... moved here. |
| (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE. |
| * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype |
| moved to ... |
| (struct cplus_struct_type): ... here. All uses updated. |
| (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite. |
| (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare. |
| (internal_type_vptr_basetype, set_type_vptr_basetype): Declare. |
| * stabsread.c (read_tilde_fields): Update setting of |
| TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * cp-valprint.c (cp_find_class_member): Rename parameter domain_p |
| to self_p. |
| (cp_print_class_member): Rename local domain to self_type. |
| * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local |
| domain_type to self_type. |
| (set_die_type) <need_gnat_info>: Handle |
| TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD. |
| * gdb-gdb.py (StructMainTypePrettyPrinter): Handle |
| TYPE_SPECIFIC_SELF_TYPE. |
| * gdbtypes.c (internal_type_self_type): New function. |
| (set_type_self_type): New function. |
| (smash_to_memberptr_type): Rename parameter domain to self_type. |
| Update setting of TYPE_SELF_TYPE. |
| (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE. |
| (smash_to_method_type): Rename parameter domain to self_type. |
| Update setting of TYPE_SELF_TYPE. |
| (check_stub_method): Call smash_to_method_type. |
| (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE. |
| (copy_type_recursive): Ditto. |
| * gdbtypes.h (enum type_specific_kind): New value |
| TYPE_SPECIFIC_SELF_TYPE. |
| (struct main_type) <type_specific>: New member self_type. |
| (struct cplus_struct_type) <fn_field.type>: Update comment. |
| (TYPE_SELF_TYPE): Rewrite. |
| (internal_type_self_type, set_type_self_type): Declare. |
| * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to |
| self_type. |
| (gnuv3_method_ptr_to_value): Rename local domain_type to self_type. |
| * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with |
| TYPE_TARGET_TYPE. |
| * stabsread.c (read_member_functions): Mark methods with |
| TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of |
| TYPE_SELF_TYPE. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE. |
| All uses updated. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs |
| or unions. Return zero if union. |
| (gnuv3_get_vtable): Call check_typedef. Assert only passed structs. |
| (gnuv3_rtti_type): Pass already-check_typedef'd value to |
| gnuv3_get_vtable. |
| (compute_vtable_size): Assert only passed structs. |
| (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD |
| kinds. |
| |
| 2015-01-31 Gary Benson <gbenson@redhat.com> |
| Doug Evans <dje@google.com> |
| |
| PR cli/9007 |
| PR cli/11920 |
| PR cli/15548 |
| * cli/cli-cmds.c (complete_command): Notify user if max-completions |
| reached. |
| * common/common-exceptions.h (enum errors) |
| <MAX_COMPLETIONS_REACHED_ERROR>: New value. |
| * completer.h (get_max_completions_reached_message): New declaration. |
| (max_completions): Likewise. |
| (completion_tracker_t): New typedef. |
| (new_completion_tracker): New declaration. |
| (make_cleanup_free_completion_tracker): Likewise. |
| (maybe_add_completion_enum): New enum. |
| (maybe_add_completion): New declaration. |
| (throw_max_completions_reached_error): Likewise. |
| * completer.c (max_completions): New global variable. |
| (new_completion_tracker): New function. |
| (free_completion_tracker): Likewise. |
| (make_cleanup_free_completion_tracker): Likewise. |
| (maybe_add_completions): Likewise. |
| (throw_max_completions_reached_error): Likewise. |
| (complete_line): Remove duplicates and limit result to max_completions |
| entries. |
| (get_max_completions_reached_message): New function. |
| (gdb_display_match_list): Handle max_completions. |
| (_initialize_completer): New declaration and function. |
| * symtab.c: Include completer.h. |
| (completion_tracker): New static variable. |
| (completion_list_add_name): Call maybe_add_completion. |
| (default_make_symbol_completion_list_break_on_1): Renamed from |
| default_make_symbol_completion_list_break_on. Maintain |
| completion_tracker across calls to completion_list_add_name. |
| (default_make_symbol_completion_list_break_on): New function. |
| * top.c (init_main): Set rl_completion_display_matches_hook. |
| * tui/tui-io.c: Include completer.h. |
| (tui_old_rl_display_matches_hook): New static global. |
| (tui_rl_display_match_list): Notify user if max-completions reached. |
| (tui_setup_io): Save/restore rl_completion_display_matches_hook. |
| * NEWS (New Options): Mention set/show max-completions. |
| |
| 2015-01-31 Gary Benson <gbenson@redhat.com> |
| |
| * symtab.c (struct add_name_data) <code>: New field. |
| Updated comments. |
| (add_symtab_completions): New function. |
| (symtab_expansion_callback): Likewise. |
| (default_make_symbol_completion_list_break_on): Set datum.code. |
| Move minimal symbol scan before calling expand_symtabs_matching. |
| Scan known primary symtabs for externs and statics before calling |
| expand_symtabs_matching. Pass symtab_expansion_callback as |
| expansion_notify argument to expand_symtabs_matching. Do not scan |
| primary symtabs for externs and statics after calling |
| expand_symtabs_matching. |
| |
| 2015-01-31 Gary Benson <gbenson@redhat.com> |
| |
| * symfile.h (expand_symtabs_exp_notify_ftype): New typedef. |
| (struct quick_symbol_functions) <expand_symtabs_matching>: |
| New argument expansion_notify. All uses updated. |
| (expand_symtabs_matching): New argument expansion_notify. |
| All uses updated. |
| * symfile-debug.c (debug_qf_expand_symtabs_matching): |
| Also print expansion notify. |
| * symtab.c (expand_symtabs_matching_via_partial): Call |
| expansion_notify whenever a partial symbol table is expanded. |
| * dwarf2read.c (dw2_expand_symtabs_matching): Call |
| expansion_notify whenever a symbol table is instantiated. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * cli-out.c: #include completer.h, readline/readline.h. |
| (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions. |
| (cli_mld_flush, cld_mld_erase_entire_line): Ditto. |
| (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto. |
| * cli-out.h (cli_display_match_list): Declare. |
| * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros. |
| (ELLIPSIS_LEN): Ditto. |
| (gdb_get_y_or_n, gdb_display_match_list_pager): New functions. |
| (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto. |
| (gdb_fnprint, gdb_print_filename): Ditto. |
| (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto. |
| (gdb_display_match_list): Ditto. |
| * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs. |
| (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto. |
| (mld_beep_ftype, mld_read_key_ftype): Ditto. |
| (match_list_displayer): New struct. |
| (gdb_display_match_list): Declare. |
| * top.c (init_main): Set rl_completion_display_matches_hook. |
| * tui/tui-io.c: #include completer.h. |
| (printable_part, PUTX, print_filename, get_y_or_n): Delete. |
| (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions. |
| (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto. |
| (tui_mld_getc, tui_mld_read_key): Ditto. |
| (tui_rl_display_match_list): Rewrite. |
| (tui_handle_resize_during_io): New arg for_completion. All callers |
| updated. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| Add symbol lookup cache. |
| * NEWS: Document new options and commands. |
| * symtab.c (symbol_cache_key): New static global. |
| (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros. |
| (SYMBOL_LOOKUP_FAILED): New macro. |
| (symbol_cache_slot_state): New enum. |
| (block_symbol_cache): New struct. |
| (symbol_cache): New struct. |
| (new_symbol_cache_size, symbol_cache_size): New static globals. |
| (hash_symbol_entry, eq_symbol_entry): New functions. |
| (symbol_cache_byte_size, resize_symbol_cache): New functions. |
| (make_symbol_cache, free_symbol_cache): New functions. |
| (get_symbol_cache, symbol_cache_cleanup): New function. |
| (set_symbol_cache_size, set_symbol_cache_size_handler): New functions. |
| (symbol_cache_lookup, symbol_cache_clear_slot): New function. |
| (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions. |
| (symbol_cache_flush, symbol_cache_dump): New functions. |
| (maintenance_print_symbol_cache): New function. |
| (maintenance_flush_symbol_cache): New function. |
| (symbol_cache_stats): New function. |
| (maintenance_print_symbol_cache_statistics): New function. |
| (symtab_new_objfile_observer): New function. |
| (symtab_free_objfile_observer): New function. |
| (lookup_static_symbol, lookup_global_symbol): Use symbol cache. |
| (_initialize_symtab): Init symbol_cache_key. New parameter |
| maint symbol-cache-size. New maint commands print symbol-cache, |
| print symbol-cache-statistics, flush-symbol-cache. |
| Install new_objfile, free_objfile observers. |
| |
| 2015-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| PR symtab/17855 |
| * symfile.c (clear_symtab_users): Move call to breakpoint_re_set |
| to end. |
| |
| 2015-01-31 Doug Evans <xdje42@gmail.com> |
| |
| * NEWS: Mention inlined scripts in .debug_gdb_scripts section. |
| * auto-load.c: #include ctype.h. |
| (struct auto_load_pspace_info): Replace member loaded_scripts with |
| new members loaded_script_files, loaded_script_texts. |
| (auto_load_pspace_data_cleanup): Update. |
| (init_loaded_scripts_info): Update. |
| (get_auto_load_pspace_data_for_loading): Update. |
| (maybe_add_script_file): Renamed from maybe_add_script. All callers |
| updated. |
| (maybe_add_script_text): New function. |
| (clear_section_scripts): Update. |
| (source_script_file, execute_script_contents): New functions. |
| (source_section_scripts): Add support for |
| SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT. |
| (print_scripts): New function. |
| (auto_load_info_scripts): Also print inlined scripts. |
| (maybe_print_unsupported_script_warning): Renamed from |
| unsupported_script_warning_print. All callers updated. |
| (maybe_print_script_not_found_warning): Renamed from |
| script_not_found_warning_print. All callers updated. |
| * extension-priv.h (struct extension_language_script_ops): New member |
| objfile_script_executor. |
| * extension.c (ext_lang_objfile_script_executor): New function. |
| * extension.h (objfile_script_executor_func): New typedef. |
| (ext_lang_objfile_script_executor): Declare. |
| * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare. |
| * guile/guile.c (guile_extension_script_ops): Update. |
| * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function. |
| * python/python.c (python_extension_script_ops): Update. |
| (gdbpy_execute_objfile_script): New function. |
| |
| 2015-01-31 Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui-io.c (tui_expand_tabs): New function. |
| (tui_puts, tui_redisplay_readline): Expand TABs into the |
| appropriate number of spaces. |
| * tui/tui-regs.c: Include tui-io.h. |
| (tui_register_format): Call tui_expand_tabs to expand TABs into |
| the appropriate number of spaces. |
| * tui/tui-io.h: Add prototype for tui_expand_tabs. |
| |
| 2015-01-30 Doug Evans <dje@google.com> |
| |
| * NEWS: "info source" command now display producer string if present. |
| * source.c (source_info): Print producer string if present. |
| |
| 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * varobj.c (varobj_delete): Fix comment. |
| |
| 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * varobj.c (create_child): Modify comment. |
| |
| 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * ada-varobj.c (ada_number_of_children): Constify struct varobj * |
| parameter. |
| (ada_name_of_variable): Same. |
| (ada_path_expr_of_child): Same. |
| (ada_value_of_variable): Same. |
| (ada_value_is_changeable_p): Same. |
| (ada_value_has_mutated): Same. |
| * c-varobj.c (varobj_is_anonymous_child): Same. |
| (c_is_path_expr_parent): Same. |
| (c_number_of_children): Same. |
| (c_name_of_variable): Same. |
| (c_path_expr_of_child): Same. |
| (get_type): Same. |
| (c_value_of_variable): Same. |
| (cplus_number_of_children): Same. |
| (cplus_name_of_variable): Same. |
| (cplus_path_expr_of_child): Same. |
| (cplus_value_of_variable): Same. |
| * jv-varobj.c (java_number_of_children): Same. |
| (java_name_of_variable): Same. |
| (java_path_expr_of_child): Same. |
| (java_value_of_variable): Same. |
| * varobj.c (number_of_children): Same. |
| (name_of_variable): Same. |
| (is_root_p): Same. |
| (varobj_ensure_python_env): Same. |
| (varobj_get_objname): Same. |
| (varobj_get_expression): Same. |
| (varobj_get_display_format): Same. |
| (varobj_get_display_hint): Same. |
| (varobj_has_more): Same. |
| (varobj_get_thread_id): Same. |
| (varobj_get_frozen): Same. |
| (dynamic_varobj_has_child_method): Same. |
| (varobj_get_gdb_type): Same. |
| (is_path_expr_parent): Same. |
| (varobj_default_is_path_expr_parent): Same. |
| (varobj_get_language): Same. |
| (varobj_get_attributes): Same. |
| (varobj_is_dynamic_p): Same. |
| (varobj_get_child_range): Same. |
| (varobj_value_has_mutated): Same. |
| (varobj_get_value_type): Same. |
| (number_of_children): Same. |
| (name_of_variable): Same. |
| (check_scope): Same. |
| (varobj_editable_p): Same. |
| (varobj_value_is_changeable_p): Same. |
| (varobj_floating_p): Same. |
| (varobj_default_value_is_changeable_p): Same. |
| |
| 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * varobj.c (varobj_get_path_expr): Set var->path_expr. |
| * c-varobj.c (c_path_expr_of_child): Set local var instead of |
| child->path_expr. |
| (cplus_path_expr_of_child): Same. |
| |
| 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * mi-cmd-var.c (print_varobj): Free varobj_get_expression |
| result. |
| (mi_cmd_var_info_expression): Same. |
| * varobj.c (varobj_get_expression): Mention in the comment that |
| the result must by freed by the caller. |
| |
| 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of |
| varobj_get_type. |
| (varobj_update_one): Same. |
| * varobj.c (update_type_if_necessary): Free curr_type_str and |
| new_type_str. |
| (varobj_get_type): Specify in comment that the result needs to be |
| freed by the caller. |
| |
| 2015-01-29 Doug Evans <dje@google.com> |
| |
| PR symtab/17890 |
| * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4. |
| |
| 2015-01-25 Mark Wielaard <mjw@redhat.com> |
| |
| * dwarf2read.c (checkproducer): Call producer_is_gcc. |
| * utils.c (producer_is_gcc_ge_4): Likewise. |
| (producer_is_gcc): New function. |
| * utils.h (producer_is_gcc): New declaration. |
| |
| 2015-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum |
| kind. |
| * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr" |
| parameter by "addr_stack" parameter. |
| (resolve_dynamic_range): Replace "addr" parameter by |
| "stack_addr" parameter. Update function documentation. |
| Update code accordingly. |
| (resolve_dynamic_array, resolve_dynamic_union) |
| (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise. |
| (resolve_dynamic_type): Update code, following the changes made |
| to resolve_dynamic_type_internal's interface. |
| * dwarf2loc.h (struct property_addr_info): New. |
| (dwarf2_evaluate_property): Replace "address" parameter |
| by "addr_stack" parameter. Adjust function documentation. |
| (struct dwarf2_offset_baton): New. |
| (struct dwarf2_property_baton): Update documentation of |
| field "referenced_type" to be more general. New field |
| "offset_info" in union data field. |
| * dwarf2loc.c (dwarf2_evaluate_property): Replace "address" |
| parameter by "addr_stack" parameter. Adjust code accordingly. |
| Add support for PROP_ADDR_OFFSET properties. |
| * dwarf2read.c (attr_to_dynamic_prop): Add support for |
| DW_AT_data_member_location attributes as well. Use case |
| statements instead of if/else condition. |
| |
| 2015-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-varobj.c (ada_varobj_get_array_number_of_children): |
| Return zero if PARENT_VALUE is NULL and parent_type's |
| range type is dynamic. |
| |
| 2015-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return |
| nonzero if the type's subtype is dynamic. |
| (resolve_dynamic_range): Also resolve the range's subtype. |
| |
| 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch) |
| |
| Pushed by Joel Brobecker <brobecker@adacore.com>. |
| * symfile.c (unmap_overlay_command): Initialize sec to NULL. |
| |
| 2015-01-27 Doug Evans <dje@google.com> |
| |
| * NEWS: Mention gdb.Objfile.username. |
| * python/py-objfile.c (objfpy_get_username): New function. |
| (objfile_getset): Add "username". |
| |
| 2015-01-24 Mark Wielaard <mjw@redhat.com> |
| |
| * stack.c (return_command): Markup warning message with _. |
| |
| 2015-01-24 Doug Evans <xdje42@gmail.com> |
| |
| * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete. |
| |
| 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix 100x slowdown regression on DWZ files. |
| * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash. |
| (struct line_header): Add offset and offset_in_dwz. |
| (dwarf_decode_lines): Add parameter decode_mapping to the declaration. |
| (free_line_header_voidp): New declaration. |
| (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New |
| functions. |
| (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller. |
| (handle_DW_AT_stmt_list): Use line_header_hash. |
| (free_line_header_voidp): New function. |
| (dwarf_decode_line_header): Initialize offset and offset_in_dwz. |
| (dwarf_decode_lines): New parameter decode_mapping, use it. |
| (dwarf2_free_objfile): Free line_header_hash. |
| |
| 2015-01-23 Simon Marchi <simon.marchi@ericsson.com> |
| |
| PR gdb/17416 |
| * valops.c (value_rtti_indirect_type): Catch exception thrown by |
| value_ind. |
| |
| 2015-01-15 Mark Wielaard <mjw@redhat.com> |
| |
| * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from |
| DW_AT_noreturn. |
| * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make |
| calling_convention an 8 bit bit field. |
| (TYPE_NO_RETURN): New macro. |
| * infcmd.c (finish_command): Query if function does not return |
| normally. |
| * stack.c (return_command): Likewise. |
| |
| 2015-01-23 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (linux_is_async_p): New macro. |
| (linux_nat_is_async_p): |
| (linux_nat_terminal_inferior): Check whether the target can async |
| instead of whether it is already async. |
| (linux_nat_terminal_ours): Don't check whether the target is |
| async. |
| (linux_async_pipe): Use linux_is_async_p. |
| |
| 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * NEWS (Changes since GDB 7.9): Add 'thread apply all' option |
| '-ascending'. |
| * thread.c (tp_array_compar_ascending, tp_array_compar): New. |
| (thread_apply_all_command): Parse CMD for tp_array_compar_ascending. |
| Sort tp_array using tp_array_compar. |
| (_initialize_thread): Extend thread_apply_all_command help. |
| |
| 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * corelow.c (core_open): Call also thread_command. |
| * gdbthread.h (thread_command): New prototype moved from ... |
| * thread.c (thread_command): ... here. |
| (thread_command): Make it global. |
| |
| 2015-01-22 Pedro Alves <palves@redhat.com> |
| |
| * configure.ac [*mingw32*]: Check $curses_found instead of |
| $prefer_curses. |
| * configure: Regenerate. |
| * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and |
| HAVE_NCURSES_NCURSES_H checks. |
| |
| 2015-01-22 Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm' |
| fails with the 1st arg NULL, try again with "unknown". Don't test |
| the "cup" capability: it isn't supported by the Windows port of |
| ncurses, but the Windows console driver is still capable of |
| supporting TUI. |
| |
| 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * compile/compile.c (_initialize_compile): Use -fPIE for compile_args. |
| |
| 2015-01-22 Eli Zaretskii <eliz@gnu.org> |
| |
| * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h. |
| (ALLDEPFILES): Remove irix5-nat.c. These two are part of the |
| reason that "make TAGS" is broken. |
| |
| 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com> |
| |
| * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues |
| and check additional store instructions. |
| |
| 2015-01-21 Wei-cheng Wang <cole945@gmail.com> |
| |
| * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang". |
| |
| 2015-01-21 Wei-cheng Wang <cole945@gmail.com> |
| |
| * ppc-linux-tdep.c (ppc_skip_trampoline_code, |
| ppc_canonicalize_syscall, ppc_linux_syscall_record, |
| ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments. |
| * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise. |
| * rs6000-tdep.c (rs6000_epilogue_frame_cache, |
| rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register, |
| rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4, |
| ppc_process_record_op19, ppc_process_record_op31, |
| ppc_process_record_op59, ppc_process_record_op60, |
| ppc_process_record_op63): Likewise. |
| |
| 2015-01-20 Joel Brobecker <brobecker@adacore.com> |
| |
| * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string) |
| (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of |
| strerror. |
| |
| 2015-01-20 Wei-cheng Wang <cole945@gmail.com> |
| |
| * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19, |
| ppc_process_record_op31, ppc_process_record_op59, |
| ppc_process_record_op60, ppc_process_record_op63, |
| ppc_process_record): Fix -Wformat warning. |
| * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60): |
| Remove unused variables. |
| |
| 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com> |
| |
| * MAINTAINERS (Write After Approval): Add "Chen Gang". |
| |
| 2015-01-19 Eli Zaretskii <eliz@gnu.org> |
| |
| * configure.ac [*mingw32*]: Only add windows-termcap.o to |
| CONFIG_OBS if not building with a curses library. |
| * configure: Regenerate. |
| |
| * windows-termcap.c: Include defs.h. Make the whole body empty if |
| either one of HAVE_CURSES_H or HAVE_NCURSES_H or |
| HAVE_NCURSES_NCURSES_H is defined. |
| |
| 2015-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator |
| from end of line to start of next line. |
| |
| 2015-01-17 Wei-cheng Wang <cole945@gmail.com> |
| |
| * ppc-linux-tdep.c (ppc_skip_trampoline_code): |
| Scan PLT stub backward for reverse debugging. |
| * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise. |
| |
| 2015-01-17 Wei-cheng Wang <cole945@gmail.com> |
| Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * configure.tgt (powerpc*-*-linux): Add linux-record.o to |
| gdb_target_obs. |
| (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall |
| record. |
| (ppc_canonicalize_syscall, ppc_linux_syscall_record, |
| ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions. |
| (ppc_linux_init_abi): Set process_record, process_record_signal. |
| * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and |
| ppc_linux_record_tdep to gdbarch_tdep. |
| (ppc_process_record): New declaration. |
| * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4, |
| ppc_process_record_op19, ppc_process_record_op31, |
| ppc_process_record_op59, ppc_process_record_op60, |
| ppc_process_record_op63, ppc_process_record): New functions. |
| |
| 2015-01-17 Wei-cheng Wang <cole945@gmail.com> |
| |
| * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to |
| rs6000_in_function_epilogue_frame_p and add an argument |
| for frame_info. |
| (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id, |
| rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer): |
| New functions. |
| (rs6000_epilogue_frame_unwind): New. |
| (rs6000_gdbarch_init): Append epilogue unwinder. |
| |
| 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * nat/linux-personality.c: Replace "#ifndef |
| HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if |
| !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5 |
| systems. |
| |
| 2015-01-16 Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New |
| functions. |
| (_initialize_tui_win) <border-kind, border-mode>: |
| <active-border-mode>: Use tui_set_var_cmd as the "set" function. |
| (tui_set_tab_width_command): Fix the commentary. |
| |
| * tui/tui-win.h: Add prototype for tui_rehighlight_all. |
| |
| * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command): |
| Doc fix. |
| (tui_set_tab_width_command): Delete and recreate the source and |
| the disassembly windows, to show the effect of the changed tab |
| size immediately. |
| |
| * tui/tui-data.h (LINE_PREFIX): Make shorter |
| (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for |
| "Thread NNNNN.XXXX" thread ID notation on Windows. |
| |
| 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix gcc-5 compilation. |
| * hppa-tdep.c (inst_saves_gr): Fix parentheses typo. |
| |
| 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h. |
| (linux-personality.o): New rule. |
| * common/common-defs.h: Include <stdint.h>. |
| * config/aarch64/linux.mh (NATDEPFILES): Include |
| linux-personality.o. |
| * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. |
| * config/arm/linux.mh (NATDEPFILES): Likewise. |
| * config/i386/linux64.mh (NATDEPFILES): Likewise. |
| * config/i386/linux.mh (NATDEPFILES): Likewise. |
| * config/ia64/linux.mh (NATDEPFILES): Likewise. |
| * config/m32r/linux.mh (NATDEPFILES): Likewise. |
| * config/m68k/linux.mh (NATDEPFILES): Likewise. |
| * config/mips/linux.mh (NATDEPFILES): Likewise. |
| * config/pa/linux.mh (NATDEPFILES): Likewise. |
| * config/powerpc/linux.mh (NATDEPFILES): Likewise. |
| * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. |
| * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. |
| * config/s390/linux.mh (NATDEPFILES): Likewise. |
| * config/sparc/linux64.mh (NATDEPFILES): Likewise. |
| * config/sparc/linux.mh (NATDEPFILES): Likewise. |
| * config/tilegx/linux.mh (NATDEPFILES): Likewise. |
| * config/xtensa/linux.mh (NATDEPFILES): Likewise. |
| * defs.h: Remove #include <stdint.h> (moved to |
| common/common-defs.h). |
| * linux-nat.c: Include nat/linux-personality.h. Remove #include |
| <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to |
| nat/linux-personality.c). |
| (linux_nat_create_inferior): Remove code to disable address space |
| randomization (moved to nat/linux-personality.c). Create cleanup |
| to disable address space randomization. |
| * nat/linux-personality.c: New file. |
| * nat/linux-personality.h: Likewise. |
| |
| 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and |
| common/posix-strerror.c. |
| (posix-strerror.o): New rule. |
| (mingw-strerror.o): Likewise. |
| * common/common-utils.h (safe_strerror): Move prototype to here, |
| from utils.h. |
| * common/common.host: New file. |
| * common/mingw-strerror.c: Likewise. |
| * common/posix-strerror.c: Likewise. |
| * configure: Regenerated. |
| * configure.ac: Source common/common.host. Add variable |
| common_host_obs to gdb_host_obs. |
| * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and |
| gdb/common/posix-strerror.c when warning about the use of |
| strerror. |
| * mingw-hdep.c (safe_strerror): Remove definition; move it to |
| common/mingw-strerror.c. |
| * posix-hdep.c (safe_strerror): Remove definition; move it to |
| common/posix-hdep.c. |
| * utils.h (safe_strerror): Remove prototype; move to |
| common/common-utils.h. |
| |
| 2015-01-15 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.8.2 released. |
| |
| 2015-01-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel |
| ___XA type if the array has already been fixed. |
| |
| 2015-01-14 Yao Qi <yao@codesourcery.com> |
| |
| * Makefile.in (ppc-linux.o): New rule. |
| * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o. |
| * configure.ac: AC_CHECK_FUNCS(getauxval). |
| * config.in: Re-generated. |
| * configure: Re-generated. |
| * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p): |
| Declare. |
| * nat/ppc-linux.c: New file. |
| * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]: |
| Call ppc64_64bit_inferior_p. |
| |
| 2015-01-14 Yao Qi <yao@codesourcery.com> |
| |
| * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to |
| nat/ppc-linux.h. |
| (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise. |
| (PPC_FEATURE_HAS_DFP): Likewise. |
| (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise. |
| (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise. |
| (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise. |
| Include "nat/ppc-linux.h". |
| * nat/ppc-linux.h: New file. |
| * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h. |
| |
| 2015-01-14 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/17525 |
| * breakpoint.c: Include "interps.h". |
| (bpstat_do_actions_1): Also check whether the interpreter is |
| async. |
| |
| 2015-01-14 Pedro Alves <palves@redhat.com> |
| |
| PR cli/17828 |
| * infrun.c (reinstall_readline_callback_handler_cleanup): Don't |
| reinstall if the interpreter is sync. |
| |
| 2015-01-13 Doug Evans <dje@google.com> |
| |
| * objfiles.c (objfile_filename): New function. |
| * objfiles.h (objfile_filename): Declare it. |
| (objfile_name): Add function comment. |
| * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the |
| bfd file name (which may be realpath'd), and the original name. |
| |
| 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Create a new section for the next release branch. |
| Rename the section of the current branch, now that it has |
| been cut. |
| |
| 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37): |
| * version.in: Bump version to 7.9.50.DATE-cvs. |
| |
| 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * nat/linux-procfs.c (linux_proc_attach_tgid_threads): |
| Remove trailing new-line in argument of call to warning. |
| |
| 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing |
| new-line in argument of call to "warning". |
| |
| 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found |
| in static block, then try searching for primitive types. |
| |
| 2015-01-12 Patrick Palka <patrick@parcs.ath.cx> |
| |
| * top.h (gdb_add_history): Declare. |
| * top.c (command_count): New variable. |
| (gdb_add_history): New function. |
| (gdb_safe_append_history): New static function. |
| (quit_force): Call it. |
| (command_line_input): Use gdb_add_history instead of |
| add_history. |
| * event-top.c (command_line_handler): Likewise. |
| |
| 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch) |
| |
| PR gdb/17046 |
| * darwin-nat.c: Replace <machine/setjmp.h> #include by |
| <setjmp.h> #include. |
| |
| 2015-01-11 Doug Evans <xdje42@gmail.com> |
| |
| * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME. |
| |
| 2015-01-11 Doug Evans <xdje42@gmail.com> |
| |
| PR gdb/15830 |
| * NEWS: The "maint demangle" command is renamed as "demangle". |
| * demangle.c: #include cli/cli-utils.h, language.h. |
| (demangle_command): New function. |
| (_initialize_demangle): Add new command "demangle". |
| * maint.c (maintenance_demangle): Stub out. |
| (_initialize_maint_cmds): Update help text for "maint demangle", |
| and mark as deprecated. |
| |
| 2015-01-11 Mark Kettenis <kettenis@gnu.org> |
| |
| * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that |
| inferior_thread is a function. |
| |
| 2015-01-09 Patrick Palka <patrick@parcs.ath.cx> |
| |
| * Makefile.in (.y.c): Don't munge yacc's #line |
| directives. |
| |
| 2015-01-09 Patrick Palka <patrick@parcs.ath.cx> |
| |
| * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper |
| to prompt for input. |
| * tui/tui-hooks.c (tui_query_hook): Remove. |
| (tui_install_hooks): Don't set deprecated_query_hook. |
| * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in |
| height calculation. Always update the command window's cur_line. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * breakpoint.c (hardware_breakpoint_inserted_here_p): New |
| function. |
| * breakpoint.h (hardware_breakpoint_inserted_here_p): New |
| declaration. |
| * linux-nat.c (linux_nat_status_is_event): Move higher up in file. |
| (linux_resume_one_lwp): Store the thread's PC. Adjust to clear |
| stop_reason. |
| (check_stopped_by_watchpoint): New function. |
| (save_sigtrap): Reimplement. |
| (linux_nat_stopped_by_watchpoint): Adjust. |
| (linux_nat_lp_status_is_event): Delete. |
| (stop_wait_callback): Only call save_sigtrap after storing the |
| pending status. |
| (status_callback): If the thread had been stopped for a breakpoint |
| that has since been removed, discard the event and resume the LWP. |
| (count_events_callback, select_event_lwp_callback): Use |
| lwp_status_pending_p instead of linux_nat_lp_status_is_event. |
| (cancel_breakpoint): Rename to ... |
| (check_stopped_by_breakpoint): ... this. Record whether the LWP |
| stopped for a software breakpoint or hardware breakpoint. |
| (select_event_lwp): Only give preference to the stepping LWP in |
| all-stop mode. Adjust comments. |
| (stop_and_resume_callback): Remove references to new_pending_p. |
| (linux_nat_filter_event): Likewise. Leave exit events of the |
| leader thread pending here. Handle signal short circuiting here. |
| Only call save_sigtrap after storing the pending waitstatus. |
| (linux_nat_wait_1): Remove 'retry' label. Remove references to |
| new_pending. Don't handle leaving events the caller is not |
| interested in pending here, nor handle signal short-circuiting |
| here. Also give equal priority to all LWPs that have had events |
| in non-stop mode. If reporting a software breakpoint event, |
| unadjust the LWP's PC. |
| * linux-nat.h (enum lwp_stop_reason): New. |
| (struct lwp_info) <stop_pc>: New field. |
| (struct lwp_info) <stopped_by_watchpoint>: Delete field. |
| (struct lwp_info) <stop_reason>: New field. |
| * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>: |
| Set the LWP's 'resumed' flag. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (linux_resume_one_lwp): New function. |
| (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp. |
| (linux_nat_resume): Use lwp_status_pending_p and |
| linux_resume_one_lwp. |
| (linux_handle_syscall_trap): Use linux_resume_one_lwp. |
| (linux_handle_extended_wait): Use linux_resume_one_lwp. |
| (status_callback, running_callback): Use lwp_status_pending_p. |
| (lwp_status_pending_p): New function. |
| (stop_and_resume_callback): Use lwp_status_pending_p. |
| (linux_nat_filter_event): Use linux_resume_one_lwp. |
| (linux_nat_wait_1): Always use status_callback to look for an LWP |
| with a pending status. Use linux_resume_one_lwp. |
| (resume_stopped_resumed_lwps): Use lwp_status_pending_p and |
| linux_resume_one_lwp. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * breakpoint.c (bp_location_inserted_here_p): New function, |
| factored out from ... |
| (breakpoint_inserted_here_p): ... here. Use |
| ALL_BP_LOCATIONS_AT_ADDR. |
| (software_breakpoint_inserted_here_p): Use |
| bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR. |
| |
| 2014-01-09 Pedro Alves <palves@redhat.com> |
| |
| Skip enabling event reporting if the kernel supports |
| PTRACE_EVENT_CLONE. |
| * linux-thread-db.c: Include "nat/linux-ptrace.h". |
| (thread_db_use_events): New function. |
| (try_thread_db_load_1): Check thread_db_use_events before enabling |
| event reporting. |
| (update_thread_state): New function. |
| (attach_thread): Use it. Check thread_db_use_events before |
| enabling event reporting. |
| (thread_db_detach): Check thread_db_use_events before disabling |
| event reporting. |
| (find_new_threads_callback): Check thread_db_use_events before |
| enabling event reporting. Update the thread's state if not using |
| libthread_db events. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're |
| about to wait for is > 0. |
| * linux-thread-db.c (find_new_threads_callback): Ignore thread if |
| the kernel thread ID is -1. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c (attach_proc_task_lwp_callback): New function. |
| (linux_nat_attach): Use linux_proc_attach_tgid_threads. |
| (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's |
| ptrace option flags. |
| * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New |
| field. |
| * nat/linux-procfs.c: Include <dirent.h>. |
| (linux_proc_get_int): New parameter "warn". Handle it. |
| (linux_proc_get_tgid): Adjust. |
| (linux_proc_get_tracerpid): Rename to ... |
| (linux_proc_get_tracerpid_nowarn): ... this. |
| (linux_proc_pid_get_state): New function, factored out from |
| (linux_proc_pid_has_state): ... this. Add new parameter "warn" |
| and handle it. |
| (linux_proc_pid_is_gone): New function. |
| (linux_proc_pid_is_stopped): Adjust. |
| (linux_proc_pid_is_zombie_maybe_warn) |
| (linux_proc_pid_is_zombie_nowarn): New functions. |
| (linux_proc_pid_is_zombie): Use |
| linux_proc_pid_is_zombie_maybe_warn. |
| (linux_proc_attach_tgid_threads): New function. |
| * nat/linux-procfs.h (linux_proc_get_tgid): Update comment. |
| (linux_proc_get_tracerpid): Rename to ... |
| (linux_proc_get_tracerpid_nowarn): ... this, and update comment. |
| (linux_proc_pid_is_gone): New declaration. |
| (linux_proc_pid_is_zombie): Update comment. |
| (linux_proc_pid_is_zombie_nowarn): New declaration. |
| (linux_proc_attach_lwp_func): New typedef. |
| (linux_proc_attach_tgid_threads): New declaration. |
| * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to |
| use nowarn functions. |
| (linux_ptrace_attach_fail_reason_string): Move here from |
| gdbserver/linux-low.c and rename. |
| (ptrace_supports_feature): If the current ptrace options are not |
| known yet, check them now, instead of asserting. |
| * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string): |
| Declare. |
| |
| 2015-01-09 Pedro Alves <palves@redhat.com> |
| |
| * linux-thread-db.c (thread_db_find_new_threads_silently) |
| (try_thread_db_load_1, try_thread_db_load, thread_db_load_search) |
| (find_new_threads_once): Print debug output on gdb_stdlog. |
| |
| 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * compile/compile.c: Include "gdb_wait.h". |
| (do_rmdir): Check return value, and free 'zap'. |
| |
| 2015-01-08 Pedro Alves <palves@redhat.com> |
| Yao Qi <yao@codesourcery.com> |
| |
| * dwarf2loc.c (indirect_pieced_value): Don't call |
| gdb_sign_extend. Call extract_signed_integer instead. |
| * utils.c (gdb_sign_extend): Remove. |
| * utils.h (gdb_sign_extend): Remove declaration. |
| |
| 2015-01-07 Pierre Muller <muller@sourceware.org> |
| |
| PR symtab/17811 |
| * stabsread.c (define_symbol): Set language for C++ special symbols. |
| |
| 2015-01-07 Patrick Palka <patrick@parcs.ath.cx> |
| |
| * inflow.c (initial_gdb_ttystate): Tweak comment. |
| |
| 2015-01-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * inflow.c (set_initial_gdb_ttystate): Add empty line after |
| comment documenting function. |
| |
| 2015-01-07 Patrick Palka <patrick@parcs.ath.cx> |
| |
| * terminal.h (set_initial_gdb_ttystate): Declare. |
| * inflow.c (initial_gdb_ttystate): New static variable. |
| (set_initial_gdb_ttystate): New setter. |
| (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate |
| instead of our current terminal state. |
| * top.c (gdb_init): Call set_initial_gdb_ttystate. |
| |
| 2015-01-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * guile/scm-type.c (tyscm_array_1): Add comment. |
| * python/py-type.c (typy_array_1): Add comment. |
| |
| 2015-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range |
| error if N2 is equal to N1 - 1. |
| |
| 2015-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * python/py-type.c (typy_array_1): Do not raise negative-length |
| exception if N2 is equal to N1 - 1. |
| |
| 2015-01-03 Doug Evans <xdje42@gmail.com> |
| |
| * c-exp.y: Whitespace cleanup. |
| (classify_inner_name): Remove extra ;. |
| |
| 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack |
| offset signed. |
| |
| 2015-01-02 Doug Evans <dje@google.com> |
| |
| * dwarf2read.c (setup_type_unit_groups): Remove outdated comment. |
| |
| 2015-01-02 Doug Evans <dje@google.com> |
| |
| * symtab.h (struct symbol): Fix typo in comment. |
| |
| 2015-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Update year range in copyright notice of all files. |
| |
| 2015-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year to 2015. |
| |
| 2015-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014. |
| |
| For older changes see ChangeLog-2014. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |