| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (s390_record_address_mask) |
| (s390_record_calc_disp_common, s390_record_calc_disp) |
| (s390_record_calc_disp_vsce, s390_record_calc_rl, s390_popcnt) |
| (s390_record_gpr_g, s390_record_gpr_h, s390_record_vr) |
| (s390_process_record): Move to s390-tdep.c. |
| (s390_linux_init_abi_any): Adjust. |
| * s390-tdep.c (s390_record_address_mask) |
| (s390_record_calc_disp_common, s390_record_calc_disp) |
| (s390_record_calc_disp_vsce, s390_record_calc_rl, s390_popcnt) |
| (s390_record_gpr_g, s390_record_gpr_h, s390_record_vr) |
| (s390_process_record): Moved from s390-linux-tdep.c |
| (s390_gdbarch_init): Adjust. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-nat.c (s390-tdep.h): New include. |
| * Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o. |
| (HFILES_NO_SRCDIR): Add s390-tdep.h. |
| (ALLDEPFILES): Add s390-tdep.c. |
| * configure.tgt (s390*-*-linux*): Add s390-tdep.o. |
| * s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to... |
| * s390-tdep.h: ...this. New file. |
| * s390-linux-tdep.c (s390-tdep.h): New include. |
| (_initialize_s390_tdep): Rename to... |
| (_initialize_s390_linux_tdep): ...this and adjust. |
| (s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep) |
| (enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to |
| s390-tdep.h. |
| (s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri) |
| (is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy) |
| (s390_is_partial_instruction, s390_software_single_step) |
| (is_non_branch_ril, s390_displaced_step_copy_insn) |
| (s390_displaced_step_fixup, s390_displaced_step_hw_singlestep) |
| (s390_prologue_data, s390_addr, s390_store, s390_load) |
| (s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue) |
| (s390_register_call_saved, s390_guess_tracepoint_registers) |
| (s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum) |
| (regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register) |
| (s390_pseudo_register_name, s390_pseudo_register_type) |
| (s390_pseudo_register_read, s390_pseudo_register_write) |
| (s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect) |
| (s390_ax_pseudo_register_push_stack, s390_gen_return_address) |
| (s390_addr_bits_remove, s390_address_class_type_flags) |
| (s390_address_class_type_flags_to_name) |
| (s390_address_class_name_to_type_flags, s390_effective_inner_type) |
| (s390_function_arg_float, s390_function_arg_vector) |
| (is_power_of_two, s390_function_arg_integer, s390_arg_state) |
| (s390_handle_arg, s390_push_dummy_call, s390_dummy_id) |
| (s390_frame_align, s390_register_return_value, s390_return_value) |
| (s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp) |
| (s390_unwind_pseudo_register, s390_adjust_frame_regnum) |
| (s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg) |
| (s390_trad_frame_prev_register, s390_unwind_cache) |
| (s390_prologue_frame_unwind_cache) |
| (s390_backchain_frame_unwind_cache, s390_frame_unwind_cache) |
| (s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind) |
| (s390_stub_unwind_cache, s390_stub_frame_unwind_cache) |
| (s390_stub_frame_this_id, s390_stub_frame_prev_register) |
| (s390_stub_frame_sniffer, s390_stub_frame_unwind) |
| (s390_frame_base_address, s390_local_base_address) |
| (s390_frame_base, s390_gcc_target_options) |
| (s390_gnu_triplet_regexp, s390_stap_is_single_operand) |
| (s390_validate_reg_range, s390_tdesc_valid) |
| (s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to... |
| * s390-tdep.c: ...this. New file. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (gdbarch_tdep.s390_syscall_record): New hook. |
| (s390_process_record, s390_gdbarch_tdep_alloc) |
| (s390_linux_init_abi_any): Use/set new hook. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (osabi.h): New include. |
| (s390_linux_init_abi_31, s390_linux_init_abi_64) |
| (s390_linux_init_abi_any): New functions. |
| (s390_gdbarch_init, _initialize_s390_tdep): Adjust. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (s390_gdbarch_init): Use gdb_assert for |
| tdesc_has_registers check |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (s390_tdesc_valid): New function. |
| (s390_validate_reg_range): New macro. |
| (s390_gdbarch_init): Adjust. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (gdbarch_tdep) <tdesc>: New field. |
| (s390_gdbarch_tdep_alloc): Adjust. |
| (s390_gdbarch_init): Adjust. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (gdbarch_tdep) <have_linux_v1, have_linux_v2> |
| <have_tdb>: Change type to bool. |
| (s390_gdbarch_tdep_alloc): Adjust. |
| (s390_gdbarch_init): Adjust. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep (s390_abi_kind) <ABI_NONE>: New default field. |
| (gdbarch_tdep) <have_upper, have_vx>: New fields. |
| (s390_gdbarch_tdep_alloc): New function. |
| (s390_gdbarch_init): Allocate tdep at start and use its fields |
| instead of separate variables. |
| |
| 2018-01-23 Philipp Rudo <prudo@linux.vnet.ibm.com> |
| |
| * s390-linux-tdep.c (s390_gdbarch_init): Remove duplicate checks |
| when looking for cached gdbarch and add comment for remaining. |
| |
| 2018-01-22 Pedro Alves <palves@redhat.com> |
| Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * typeprint.c (whatis_exp): Initialize "val" in the "whatis type" |
| case. |
| |
| 2018-01-22 Maciej W. Rozycki <macro@mips.com> |
| |
| * MAINTAINERS: Update my company e-mail address. |
| |
| 2018-01-22 Yao Qi <yao.qi@linaro.org> |
| |
| * regcache.c (cooked_write_test): New function. |
| (_initialize_regcache): Register the test. |
| |
| 2018-01-22 Yao Qi <yao.qi@linaro.org> |
| |
| * ia64-tdep.c (ia64_pseudo_register_read): Call |
| regcache->cooked_read instead of regcache_cooked_read_unsigned. |
| * m32c-tdep.c (m32c_cat_read): Likewise. |
| (m32c_r3r2r1r0_read): Likewise. |
| * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise. |
| * xtensa-tdep.c (xtensa_register_read_masked): Likewise. |
| |
| 2018-01-22 Yao Qi <yao.qi@linaro.org> |
| |
| * aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache |
| method raw_read instead of regcache_raw_read. |
| * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise. |
| * arm-tdep.c (arm_neon_quad_read): Likewise. |
| * avr-tdep.c (avr_pseudo_register_read): Likewise. |
| * bfin-tdep.c (bfin_pseudo_register_read): Likewise. |
| * frv-tdep.c (frv_pseudo_register_read): Likewise. |
| * h8300-tdep.c (h8300_pseudo_register_read): Likewise. |
| * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. |
| (i386_pseudo_register_read_into_value): Likewise. |
| * mep-tdep.c (mep_pseudo_cr32_read): Likewise. |
| * msp430-tdep.c (msp430_pseudo_register_read): Likewise. |
| * nds32-tdep.c (nds32_pseudo_register_read): Likewise. |
| * rl78-tdep.c (rl78_pseudo_register_read): Likewise. |
| * s390-linux-tdep.c (s390_pseudo_register_read): Likewise. |
| * sparc-tdep.c (sparc32_pseudo_register_read): Likewise. |
| * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise. |
| * spu-tdep.c (spu_pseudo_register_read_spu): Likewise. |
| * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise. |
| |
| 2018-01-22 Yao Qi <yao.qi@linaro.org> |
| |
| * Makefile.in (ALL_TARGET_OBS): Remove mt-tdep.o. |
| * configure.tgt: Remove target mt. |
| * mt-tdep.c: Remove. |
| * regcache.c (cooked_read_test): Remove the check for mt. |
| |
| 2018-01-22 Yao Qi <yao.qi@linaro.org> |
| |
| * jit.c (jit_frame_prev_register): Call regcache::cooked_read |
| instead of gdbarch_pseudo_register_read_value. |
| |
| 2018-01-22 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (need_gnat_info): Return nonzero if the cu's |
| language is Ada. |
| |
| 2018-01-22 Joel Brobecker <brobecker@adacore.com> |
| |
| * linespec.c (create_sals_line_offset): Remove code that preserved |
| the symtab_and_line's line number. |
| |
| 2018-01-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * varobj.c (varobj_create): Don't set valid_block when creating a |
| floating varobj. |
| |
| 2018-01-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * varobj.c (varobj_create): Remove out of date comment. |
| |
| 2018-01-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| PR mi/20395 |
| * ada-exp.y (write_var_from_sym): Pass extra parameter when |
| updating innermost block. |
| * parse.c (innermost_block_tracker::update): Take extra type |
| parameter, and check types match before updating innermost block. |
| (write_dollar_variable): Update innermost block for registers. |
| * parser-defs.h (enum innermost_block_tracker_type): New enum. |
| (innermost_block_tracker::innermost_block_tracker): Initialise |
| m_types member. |
| (innermost_block_tracker::reset): Take type parameter. |
| (innermost_block_tracker::update): Take type parameter, and pass |
| type through as needed. |
| (innermost_block_tracker::m_types): New member. |
| * varobj.c (varobj_create): Pass type when reseting innermost |
| block. |
| |
| 2018-01-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * ada-exp.y (write_var_from_sym): Switch to innermost_block API. |
| * ada-lang.c (resolve_subexp): Likewise. |
| * breakpoint.c (set_breakpoint_condition) Likewise. |
| (watch_command_1) Likewise. |
| * c-exp.y (variable): Likewise. |
| * d-exp.y (PrimaryExpression): Likewise. |
| * f-exp.y (variable): Likewise. |
| * go-exp.y (variable): Likewise. |
| * m2-exp.y (variable): Likewise. |
| * objfiles.c (objfile::~objfile): Likewise. |
| * p-exp.y (variable): Likewise. |
| * parse.c (innermost_block): Change type. |
| * parser-defs.h (class innermost_block_tracker): New. |
| (innermost_block): Change to innermost_block_tracker. |
| * printcmd.c (display_command): Switch to innermost_block API. |
| (do_one_display): Likewise. |
| * rust-exp.y (do_one_display): Likewise. |
| * symfile.c (clear_symtab_users): Likewise. |
| * varobj.c (varobj_create): Switch to innermost_block API, replace |
| use of innermost_block with block stored on varobj object. |
| |
| 2018-01-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * expression.h (innermost_block): Remove declaration. |
| * varobj.c: Add 'parser-defs.h' include. |
| |
| 2018-01-19 Tom Tromey <tom@tromey.com> |
| |
| * rust-lang.c (rust_lookup_symbol_nonlocal): Look up qualified |
| symbols in the static and global blocks. |
| |
| 2018-01-19 James Clarke <jrtc27@jrtc27.com> |
| |
| * nat/linux-ptrace.c: Remove unnecessary reinclusion of |
| gdb_ptrace.h, and move including gdb_wait.h ... |
| * nat/linux-ptrace.h: ... to here. |
| |
| 2018-01-19 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * inf-ptrace.c (inf_ptrace_detach): Adjust call to |
| inf_ptrace_detach_success. |
| (inf_ptrace_detach_success): Add inferior parameter, use it |
| instead of inferior_ptid, pass it to detach_inferior. |
| * inf-ptrace.h (inf_ptrace_detach_success): Add inferior |
| parameter. |
| * inferior.c (detach_inferior): Add overload that takes an |
| inferior object. |
| * inferior.h (detach_inferior): Likewise. |
| * linux-nat.c (linux_nat_detach): Use the inf parameter, don't |
| use inferior_ptid, adjust call to inf_ptrace_detach_success. |
| * linux-thread-db.c (thread_db_detach): Use inf parameter. |
| |
| 2018-01-19 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * target.h (struct target_ops) <to_detach>: Add inferior |
| parameter. |
| (target_detach): Likewise. |
| * target.c (dispose_inferior): Pass inferior down. |
| (target_detach): Pass inferior down. Assert that it is equal to |
| the current inferior. |
| * aix-thread.c (aix_thread_detach): Pass inferior down. |
| * corefile.c (core_file_command): Pass current_inferior() down. |
| * corelow.c (core_detach): Add inferior parameter. |
| * darwin-nat.c (darwin_detach): Likewise. |
| * gnu-nat.c (gnu_detach): Likewise. |
| * inf-ptrace.c (inf_ptrace_detach): Likewise. |
| * infcmd.c (detach_command): Pass current_inferior() down to |
| target_detach. |
| * infrun.c (follow_fork_inferior): Pass parent_inf to |
| target_detach. |
| (handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to |
| target_detach. |
| * linux-nat.c (linux_nat_detach): Add inferior parameter. |
| * linux-thread-db.c (thread_db_detach): Likewise. |
| * nto-procfs.c (procfs_detach): Likewise. |
| * procfs.c (procfs_detach): Likewise. |
| * record.c (record_detach): Likewise. |
| * record.h (struct inferior): Forward-declare. |
| (record_detach): Add inferior parameter. |
| * remote-sim.c (gdbsim_detach): Likewise. |
| * remote.c (remote_detach_1): Likewise. |
| (remote_detach): Likewise. |
| (extended_remote_detach): Likewise. |
| * sol-thread.c (sol_thread_detach): Likewise. |
| * target-debug.h (target_debug_print_inferior_p): New macro. |
| * target-delegates.c: Re-generate. |
| * top.c (kill_or_detach): Pass inferior down to target_detach. |
| * windows-nat.c (windows_detach): Add inferior parameter. |
| |
| 2018-01-19 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * target.h (struct target_ops) <to_detach>: Remove args |
| parameter. |
| (target_detach): Likewise. |
| * target.c (dispose_inferior): Adjust. |
| (target_detach): Remove args parameter, adjust. |
| * aix-thread.c (aix_thread_detach): Adjust. |
| * corefile.c (core_file_command): Adjust. |
| * corelow.c (core_detach): Adjust. |
| * darwin-nat.c (darwin_detach): Adjust. |
| * gnu-nat.c (gnu_detach): Adjust. |
| * inf-ptrace.c (inf_ptrace_detach): Adjust. |
| * infcmd.c (detach_command): Adjust |
| * infrun.c (follow_fork_inferior): Adjust. |
| (handle_vfork_child_exec_or_exit): Adjust. |
| * linux-fork.c (linux_fork_detach): Remove args parameter. |
| * linux-fork.h (linux_fork_detach): Likewise. |
| * linux-nat.c (linux_nat_detach): Likewise, and adjust. |
| * linux-thread-db.c (thread_db_detach): Likewise. |
| * nto-procfs.c (procfs_detach): Likewise. |
| * procfs.c (procfs_detach): Likewise. |
| (do_detach): Remove signo parameter. |
| * record.c (record_detach): Remove args parameter. |
| * record.h (record_detach): Likewise. |
| * remote-sim.c (gdbsim_detach): Likewise. |
| * remote.c (remote_detach_1): Likewise. |
| (remote_detach): Likewise. |
| (extended_remote_detach): Likewise. |
| * sol-thread.c (sol_thread_detach): Likewise. |
| * target-delegates.c: Re-generate. |
| * top.c (struct qt_args) <args>: Remove field. |
| (kill_or_detach): Don't pass args. |
| (quit_force): Don't set args. |
| * windows-nat.c (windows_detach): Remove args parameter. |
| |
| 2018-01-19 Yao Qi <yao.qi@linaro.org> |
| |
| * arm-linux-tdep.c (arm_linux_gcc_target_options): New function. |
| (arm_linux_init_abi): Install it. |
| |
| 2018-01-19 Yao Qi <yao.qi@linaro.org> |
| |
| * osabi.c (gdb_osabi_names): Extend the regexp for |
| arm-linux-gnueabihf. |
| |
| 2018-01-18 Yao Qi <yao.qi@linaro.org> |
| |
| * dwarf2read.c (abbrev_table) <abbrevs>: Rename it to |
| m_abbrevs. |
| (abbrev_table::add_abbrev): Update. |
| (abbrev_table::lookup_abbrev): Update. |
| |
| 2018-01-18 Yao Qi <yao.qi@linaro.org> |
| |
| * ppc-linux-tdep.c (ppu2spu_prev_register): Call cooked_read. |
| |
| 2018-01-17 Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * compile/compile.c (compile_to_object): Convert "triplet_rx" |
| to "std::string". |
| |
| 2018-01-17 Tom Tromey <tom@tromey.com> |
| |
| * dwarf2read.c (symbolp): Remove typedef. Don't instantiate VEC. |
| |
| 2018-01-17 Tom Tromey <tom@tromey.com> |
| |
| * gdbtypes.h (add_dyn_prop): Remove objfile parameter. |
| * gdbtypes.c (add_dyn_prop): Remove objfile parameter. |
| (create_array_type_with_stride): Update. |
| * dwarf2read.c (set_die_type): Update. |
| |
| 2018-01-17 Tom Tromey <tom@tromey.com> |
| |
| * dwarf2read.c (delayed_method_info): Remove typedef. |
| (dwarf2_cu::method_info): Now a std::vector. |
| (add_to_method_list): Update. |
| (free_delayed_list): Remove. |
| (compute_delayed_physnames): Update. |
| (process_full_comp_unit, process_full_type_unit): Clear the method |
| list. Remove cleanups. |
| (psymtab_include_file_name): Add name_holder parameter. Use |
| unique_xmalloc_ptr. |
| (dwarf_decode_lines): Update. |
| |
| 2018-01-17 Tom Tromey <tom@tromey.com> |
| Simon Marchi <simon.marchi@ericsson.com> |
| |
| * dwarf2read.c (struct dwarf2_cu): Add constructor, destructor. |
| (dwarf2_per_objfile::free_cached_comp_units) |
| (init_tu_and_read_dwo_dies, init_cutu_and_read_dies) |
| (init_cutu_and_read_dies_no_follow): Update. |
| (dwarf2_cu::dwarf2_cu): Rename from init_one_comp_unit. |
| (dwarf2_cu::~dwarf2_cu): New. |
| (free_heap_comp_unit, free_stack_comp_unit): Remove. |
| (age_cached_comp_units, free_one_cached_comp_unit): Update. |
| |
| 2018-01-17 Tom Tromey <tom@tromey.com> |
| Simon Marchi <simon.marchi@ericsson.com> |
| |
| * dwarf2read.c (struct dwarf2_cu) <abbrev_table>: Remove. |
| (struct die_reader_specs) <abbrev_table>: New member. |
| (struct abbrev_table): Add constructor. |
| <alloc_abbrev, add_abbrev, lookup_abbrev>: Declare. |
| <abbrev_obstack>: Now an auto_obstack. |
| (abbrev_table_up): New typedef. |
| (init_cu_die_reader): Add abbrev_table parameter. |
| (read_cutu_die_from_dwo): Remove abbrev_table_provided parameter. |
| Add result_dwo_abbrev_table. |
| (init_tu_and_read_dwo_dies, init_cutu_and_read_dies) |
| (init_cutu_and_read_dies_no_follow, build_type_psymtabs_1): |
| Update. |
| (peek_die_abbrev): Take die_reader_specs, not dwarf_cu as |
| parameter. |
| (skip_children): Update. |
| (abbrev_table::alloc_abbrev): Rename from |
| abbrev_table_alloc_abbrev. |
| (abbrev_table::add_abbrev): Rename from abbrev_table_add_abbrev. |
| (abbrev_table::lookup_abbrev): Rename from |
| abbrev_table_lookup_abbrev. |
| (abbrev_table_read_table): Return abbrev_table_up. |
| (abbrev_table_free, abbrev_table_free_cleanup) |
| (dwarf2_read_abbrevs, dwarf2_free_abbrev_table): Remove. |
| (load_partial_dies): Update. |
| |
| 2018-01-17 Tom Tromey <tom@tromey.com> |
| |
| * dwarf2read.c (dwarf2_compute_name): Update comment. |
| (read_func_scope, read_variable): Update. |
| (new_symbol): Remove. |
| (new_symbol_full): Rename to new_symbol. |
| |
| 2018-01-17 Mike Gulick <mgulick@mathworks.com> |
| |
| PR gdb/16577 |
| * gdb_bfd.c (gdb_bfd_map_section): If unable to read object file, issue |
| a warning instead of throwing an error, set section size to 0 and return |
| NULL. |
| * gdb_bfd.h (gdb_bfd_map_section): Update description. |
| |
| 2018-01-17 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Return |
| std::string. |
| (linux_ptrace_attach_fail_reason_string): Likewise. |
| * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): |
| Likewise. |
| (linux_ptrace_attach_fail_reason_string): Likewise. |
| * linux-nat.c (attach_proc_task_lwp_callback): Adjust. |
| |
| 2018-01-17 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * linux-nat.c (linux_nat_attach): Remove xstrdup. |
| |
| 2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com> |
| |
| PR gdb/21559 |
| * configure.ac: Include <sys/types.h> prior to <sys/user.h> when |
| checking for fs_base/gs_base fields in struct user_regs_struct. |
| * configure: Regenerate. |
| |
| 2018-01-17 Yao Qi <yao.qi@linaro.org> |
| |
| * aarch64-linux-tdep.c (aarch64_linux_gcc_target_options): New |
| function. |
| (aarch64_linux_init_abi): Install it to gdbarch hook |
| gcc_target_options. |
| |
| 2018-01-15 Pedro Alves <palves@redhat.com> |
| |
| * common/signals-state-save-restore.c |
| (save_original_signals_state): Fix typos. |
| |
| 2017-01-12 Tom Tromey <tom@tromey.com> |
| Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * Makefile.in (install-only): Install gdb-add-index. |
| |
| 2018-01-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-tdep.c (KVE_PROTECTION): Correct value. |
| |
| 2018-01-12 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| |
| * infrun.c (keep_going_pass_signal): Clear step-over info when |
| insert_breakpoints fails. |
| |
| 2018-01-11 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/22583 |
| * infrun.c (resume): Rename to ... |
| (resume_1): ... this. |
| (resume): Reimplement as wrapper around resume_1. |
| |
| 2018-01-11 Pedro Alves <palves@redhat.com> |
| |
| PR remote/22597 |
| * remote.c (remote_parse_stop_reply): Default to the last-set |
| general thread instead of to 'magic_null_ptid'. |
| |
| 2018-01-10 Pedro Alves <palves@redhat.com> |
| |
| * language.h (language_get_symbol_name_matcher): Rename ... |
| (get_symbol_name_matcher): ... this. |
| * language.c (language_get_symbol_name_matcher): Ditto. |
| * dictionary.c, linespec.c, minsyms.c, psymtab.c, symtab.c: All |
| callers adjusted. |
| |
| 2018-01-10 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/22670 |
| * dwarf2read.c |
| (gdb_index_symbol_name_matcher::gdb_index_symbol_name_matcher): |
| Adjust to use language_get_symbol_name_matcher instead of |
| language_defn::la_get_symbol_name_matcher. |
| * language.c (language_get_symbol_name_matcher): If in Ada mode |
| and the lookup name is a verbatim match, return Ada's matcher. |
| * language.h (language_get_symbol_name_matcher): Adjust comment. |
| (ada_lookup_name_info::verbatim_p):: New method. |
| |
| 2018-01-10 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/22670 |
| * ada-lang.c (ada_collect_symbol_completion_matches): If the |
| minsym's language is language_auto or language_cplus, pass down |
| language_ada instead. |
| * symtab.c (compare_symbol_name): Don't frob symbol language here. |
| |
| 2018-01-10 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/22670 |
| * minsyms.c (linkage_name_str): New function. |
| (iterate_over_minimal_symbols): Use it. |
| |
| 2018-01-09 John Baldwin <jhb@FreeBSD.org> |
| |
| * NEWS: Document that 'info proc' now works on FreeBSD. |
| |
| 2018-01-09 John Baldwin <jhb@FreeBSD.org> |
| |
| * configure.ac: Check for kinfo_getfile in libutil. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * fbsd-nat.c: Include "fbsd-tdep.h". |
| (fbsd_fetch_cmdline): New. |
| (fbsd_fetch_kinfo_proc): Move earlier and change to return a bool |
| rather than calling error. |
| (fbsd_info_proc): New. |
| (fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails. |
| (fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails. |
| (fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc". |
| |
| 2018-01-09 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-nat.c (struct free_deleter): Remove. |
| (fbsd_find_memory_regions): Use gdb::unique_xmalloc_ptr<>. |
| |
| 2018-01-09 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-nat.c (fbsd_pid_to_exec_file) [KERN_PROC_PATHNAME]: Return |
| NULL for an empty pathname. |
| |
| 2018-01-09 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-tdep.c (KVE_STRUCTSIZE, KVE_START, KVE_END, KVE_OFFSET) |
| (KVE_FLAGS, KVE_PROTECTION, KVE_PATH, KINFO_VME_PROT_READ) |
| (KINFO_VME_PROT_WRITE, KINFO_VME_PROT_EXEC, KINFO_VME_FLAG_COW) |
| (KINFO_VME_FLAG_NEEDS_COPY, KINFO_VME_FLAG_NOCOREDUMP) |
| (KINFO_VME_FLAG_SUPER, KINFO_VME_FLAG_GROWS_UP) |
| (KINFO_VME_FLAG_GROWS_DOWN, KF_STRUCTSIZE, KF_TYPE, KF_FD) |
| (KF_PATH, KINFO_FILE_TYPE_VNODE, KINFO_FILE_FD_TYPE_CWD) |
| (KINFO_FILE_FD_TYPE_TEXT, SIG_WORDS, struct kinfo_proc_layout) |
| (kinfo_proc_layout_32, kinfo_proc_layout_i386) |
| (kinfo_proc_layout_64, fbsd_vm_map_entry_flags) |
| (fbsd_core_info_proc_mappings, fbsd_core_vnode_path) |
| (fbsd_core_fetch_timeval, fbsd_print_sigset) |
| (fbsd_core_info_proc_status, fbsd_core_info_proc): New. |
| (fbsd_init_abi): Install gdbarch "core_info_proc" method. |
| * fbsd-tdep.h (fbsd_vm_map_entry_flags): New. |
| |
| 2018-01-08 Samuel Thibault <samuel.thibault@ens-lyon.org> |
| |
| * gdb/gnu-nat.c: Include <elf.h> and <link.h>. |
| (gnu_xfer_auxv): New function. |
| (gnu_xfer_partial): Call gnu_xfer_auxv when `object' is |
| TARGET_OBJECT_AUXV. |
| |
| 2018-01-08 Yao Qi <yao.qi@linaro.org> |
| Simon Marchi <simon.marchi@ericsson.com> |
| |
| * Makefile.in (COMMON_SFILES): Remove selftest-arch.c and |
| common/selftest.c. |
| (COMMON_OBS): Remove selftest.o. |
| * configure.ac: Append selftest-arch.c and common/selftest.c to |
| CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS. |
| * configure: Re-generated. |
| * maint.c (maintenance_selftest): Wrap selftests::run_tests with |
| GDB_SELF_TEST. |
| (maintenance_info_selftests): Likewise. |
| |
| 2018-01-08 Xavier Roirand <roirand@adacore.com> |
| |
| * ada-valprint.c (val_print_packed_array_elements): Use |
| proper number of elements when printing an array indexed |
| by an enumeration type. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * dwarf2read.c (struct dwarf2_cu) <dwarf2_per_objfile>: Remove. |
| (dw2_get_file_names_reader): Adjust. |
| (lookup_dwo_signatured_type): Adjust. |
| (lookup_dwp_signatured_type): Adjust. |
| (lookup_signatured_type): Adjust. |
| (create_type_unit_group): Adjust. |
| (get_type_unit_group): Adjust. |
| (process_psymtab_comp_unit_reader): Adjust. |
| (build_type_psymtabs_reader): Adjust. |
| (scan_partial_symbols): Adjust. |
| (add_partial_symbol): Adjust. |
| (add_partial_subprogram): Adjust. |
| (peek_die_abbrev): Adjust. |
| (fixup_go_packaging): Adjust. |
| (process_imported_unit_die): Adjust. |
| (dwarf2_compute_name): Adjust. |
| (dwarf2_physname): Adjust. |
| (read_import_statement): Adjust. |
| (handle_DW_AT_stmt_list): Adjust. |
| (read_file_scope): Adjust. |
| (read_func_scope): Adjust. |
| (read_lexical_block_scope): Adjust. |
| (read_call_site_scope): Adjust. |
| (read_variable): Adjust. |
| (dwarf2_rnglists_process): Adjust. |
| (dwarf2_ranges_process): Adjust. |
| (dwarf2_ranges_read): Adjust. |
| (dwarf2_get_pc_bounds): Adjust. |
| (dwarf2_record_block_ranges): Adjust. |
| (dwarf2_add_field): Adjust. |
| (dwarf2_add_member_fn): Adjust. |
| (read_structure_type): Adjust. |
| (process_structure_scope): Adjust. |
| (read_enumeration_type): Adjust. |
| (read_array_type): Adjust. |
| (mark_common_block_symbol_computed): Adjust. |
| (read_common_block): Adjust. |
| (read_namespace_type): Adjust. |
| (read_namespace): Adjust. |
| (read_module_type): Adjust. |
| (read_tag_pointer_type): Adjust. |
| (read_tag_ptr_to_member_type): Adjust. |
| (read_tag_string_type): Adjust. |
| (read_subroutine_type): Adjust. |
| (read_typedef): Adjust. |
| (read_base_type): Adjust. |
| (attr_to_dynamic_prop): Adjust. |
| (read_subrange_type): Adjust. |
| (read_unspecified_type): Adjust. |
| (dwarf2_read_abbrevs): Adjust. |
| (load_partial_dies): Adjust. |
| (read_partial_die): Adjust. |
| (find_partial_die): Adjust. |
| (guess_partial_die_structure_name): Adjust. |
| (fixup_partial_die): Adjust. |
| (read_attribute_value): Adjust. |
| (read_addr_index): Adjust. |
| (read_addr_index_from_leb128): Adjust. |
| (read_str_index): Adjust. |
| (dwarf2_string_attr): Adjust. |
| (get_debug_line_section): Adjust. |
| (dwarf_decode_line_header): Adjust. |
| (lnp_state_machine::check_line_address): Adjust. |
| (dwarf_decode_lines_1): Adjust. |
| (dwarf_decode_lines): Adjust. |
| (dwarf2_start_symtab): Adjust. |
| (var_decode_location): Adjust. |
| (new_symbol_full): Adjust. |
| (dwarf2_const_value_data): Adjust. |
| (dwarf2_const_value_attr): Adjust. |
| (dwarf2_const_value): Adjust. |
| (die_type): Adjust. |
| (die_containing_type): Adjust. |
| (build_error_marker_type): Adjust. |
| (lookup_die_type): Adjust. |
| (guess_full_die_structure_name): Adjust. |
| (anonymous_struct_prefix): Adjust. |
| (determine_prefix): Adjust. |
| (dwarf2_name): Adjust. |
| (follow_die_ref_or_sig): Adjust. |
| (follow_die_offset): Adjust. |
| (follow_die_ref): Adjust. |
| (follow_die_sig_1): Adjust. |
| (follow_die_sig): Adjust. |
| (get_signatured_type): Adjust. |
| (get_DW_AT_signature_type): Adjust. |
| (decode_locdesc): Adjust. |
| (dwarf_decode_macros): Adjust. |
| (cu_debug_loc_section): Adjust. |
| (fill_in_loclist_baton): Adjust. |
| (dwarf2_symbol_mark_computed): Adjust. |
| (init_one_comp_unit): Don't assign |
| dwarf2_cu::dwarf2_per_objfile. |
| (set_die_type): Adjust. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * dwarf2read.c (struct mapped_debug_names): Add constructor. |
| <dwarf2_per_objfile>: New field. |
| (dwarf2_per_objfile): Remove global. |
| (get_dwarf2_per_objfile): New function. |
| (set_dwarf2_per_objfile): New function. |
| (dwarf2_build_psymtabs_hard): Change objfile parameter to |
| dwarf2_per_objfile. |
| (abbrev_table_read_table): Add dwarf2_per_objfile parameter. |
| (read_abbrev_offset): Likewise. |
| (read_indirect_string): Likewise. |
| (read_indirect_line_string): Likewise. |
| (read_indirect_string_at_offset): Likewise. |
| (read_indirect_string_from_dwz): Likewise. |
| (dwarf2_find_containing_comp_unit): Change objfile parameter to |
| dwarf2_per_objfile. |
| (age_cached_comp_units): Add dwarf2_per_objfile parameter. |
| (create_all_comp_units): Change objfile parameter to |
| dwarf2_per_objfile. |
| (create_all_type_units): Likewise. |
| (process_queue): Add dwarf2_per_objfile parameter. |
| (read_and_check_comp_unit_head): Likewise. |
| (lookup_dwo_unit_in_dwp): Likewise. |
| (get_dwp_file): Likewise. |
| (process_cu_includes): Likewise. |
| (struct free_dwo_file_cleanup_data): New struct. |
| (dwarf2_has_info): Use get_dwarf2_per_objfile and |
| set_dwarf2_per_objfile. |
| (dwarf2_get_dwz_file): Add dwarf2_per_objfile parameter. |
| (dw2_do_instantiate_symtab): Get dwarf2_per_objfile from |
| context, adjust calls. |
| (dw2_instantiate_symtab): Likewise. |
| (dw2_get_cutu): Add dwarf2_per_objfile parameter. |
| (dw2_get_cu): Likewise. |
| (create_cu_from_index_list): Change objfile parameter to |
| dwarf2_per_objfile. |
| (create_cus_from_index_list): Get dwarf2_per_objfile from |
| context, adjust calls. |
| (create_cus_from_index): Likewise. |
| (create_signatured_type_table_from_index): Change objfile |
| parameter to dwarf2_per_objfile. |
| (create_signatured_type_table_from_debug_names): Change objfile |
| parameter to dwarf2_per_objfile. |
| (create_addrmap_from_index): Likewise. |
| (create_addrmap_from_aranges): Likewise. |
| (dwarf2_read_index): Use get_dwarf2_per_objfile, adjust calls. |
| (dw2_setup): Remove. |
| (dw2_get_file_names_reader): Get dwarf2_per_objfile from |
| context. |
| (dw2_find_last_source_symtab): Get dwarf2_per_objfile using |
| get_dwarf2_per_objfile. |
| (dw2_forget_cached_source_info): Likewise. |
| (dw2_map_symtabs_matching_filename): Likewise. |
| (struct dw2_symtab_iterator) <index>: Remove. |
| <dwarf2_per_objfile>: New field. |
| (dw2_symtab_iter_init): Replace index parameter with |
| dwarf2_per_objfile. |
| (dw2_symtab_iter_next): Use dwarf2_per_objfile from iter. |
| (dw2_lookup_symbol): Use get_dwarf2_per_objfile and adjust. |
| (dw2_print_stats): Likewise. |
| (dw2_dump): Likewise. |
| (dw2_expand_symtabs_for_function): Likewise. |
| (dw2_expand_all_symtabs): Likewise. |
| (dw2_expand_symtabs_with_fullname): Likewise. |
| (dw2_expand_marked_cus): Replace index and objfile parameters |
| with dwarf2_per_objfile. |
| (dw_expand_symtabs_matching_file_matcher): Add |
| dwarf2_per_objfile parameter and adjust calls. |
| (dw2_expand_symtabs_matching): Use get_dwarf2_per_objfile and |
| adjust calls. |
| (dw2_find_pc_sect_compunit_symtab): Don't call dw2_setup. |
| (dw2_map_symbol_filenames): Use get_dwarf2_per_objfile and |
| adjust calls. |
| (create_cus_from_debug_names_list): Replace objfile parameter |
| with dwarf2_per_objfile and adjust calls. |
| (create_cus_from_debug_names): Likewise. |
| (dwarf2_read_debug_names): Likewise. |
| (mapped_debug_names::namei_to_name): Adjust call. |
| (dw2_debug_names_iterator::next): Likewise. |
| (dw2_debug_names_iterator::find_vec_in_debug_names): Likewise. |
| (dw2_debug_names_lookup_symbol): Use get_dwarf2_per_objfile. |
| (dw2_debug_names_dump): Likewise. |
| (dw2_debug_names_expand_symtabs_for_function): Likewise. |
| (dw2_debug_names_expand_symtabs_matching): Likewise. |
| (dwarf2_initialize_objfile): Likewise. |
| (dwarf2_build_psymtabs): Likewise. |
| (get_abbrev_section_for_cu): Get dwarf2_per_objfile from |
| this_cu. |
| (error_check_comp_unit_head): Add dwarf2_per_objfile parameter. |
| (read_and_check_comp_unit_head): Likewise. |
| (read_abbrev_offset): Likewise. |
| (create_debug_type_hash_table): Likewise. |
| (create_debug_types_hash_table): Likewise. |
| (create_all_type_units): Replace objfile parameter with |
| dwarf2_per_objfile. |
| (add_type_unit): Add dwarf2_per_objfile parameter. |
| (fill_in_sig_entry_from_dwo_entry): Replace objfile parameter |
| with dwarf2_per_objfile. |
| (lookup_dwo_signatured_type): Get dwarf2_per_objfile from cu. |
| (lookup_dwp_signatured_type): Likewise. |
| (lookup_signatured_type): Likewise. |
| (read_cutu_die_from_dwo): Likewise. |
| (init_tu_and_read_dwo_dies): Likewise. |
| (init_cutu_and_read_dies): Likewise. |
| (init_cutu_and_read_dies_no_follow): Likewise. |
| (allocate_type_unit_groups_table): Add objfile parameter. |
| (create_type_unit_group): Use dwarf2_per_objfile from cu. |
| (get_type_unit_group): Likewise. |
| (process_psymtab_comp_unit): Update call. |
| (build_type_psymtabs_reader): Use dwarf2_per_objfile from cu. |
| (build_type_psymtabs_1): Add dwarf2_per_objfile parameter. |
| (print_tu_stats): Likewise. |
| (build_type_psymtab_dependencies): Use dwarf2_per_objfile passed |
| in void* parameter. |
| (build_type_psymtabs): Change objfile parameter to |
| dwarf2_per_objfile. |
| (process_skeletonless_type_unit): Use dwarf2_per_objfile |
| passed in void* parameter. |
| (process_skeletonless_type_units): Change objfile parameter to |
| dwarf2_per_objfile. |
| (set_partial_user): Likewise. |
| (dwarf2_build_psymtabs_hard): Likewise. |
| (read_comp_units_from_section): Likewise. |
| (create_all_comp_units): Likewise. |
| (scan_partial_symbols): Update calls. |
| (add_partial_symbol): Likewise. |
| (dwarf2_read_symtab): Use get_dwarf2_per_objfile. |
| (maybe_queue_comp_unit): Use dwarf2_read_symtab from cu. |
| (process_queue): Add dwarf2_per_objfile parameter. |
| (get_compunit_symtab): Use dwarf2_per_objfile from cu. |
| (compute_compunit_symtab_includes): Likewise. |
| (process_cu_includes): Add dwarf2_per_objfile parameter. |
| (process_full_comp_unit): Use dwarf2_per_objfile from cu. |
| (process_full_type_unit): Likewise. |
| (process_imported_unit_die): Update call. |
| (handle_DW_AT_stmt_list): Use dwarf2_per_objfile from cu. |
| (read_file_scope): Likewise. |
| (allocate_dwo_file_hash_table): Add objfile parameter. |
| (lookup_dwo_file_slot): Add dwarf2_per_objfile parameter. |
| (create_cus_hash_table): Likewise. |
| (create_dwp_hash_table): Likewise. |
| (create_dwo_unit_in_dwp_v1): Likewise. |
| (create_dwp_v2_section): Likewise. |
| (create_dwo_unit_in_dwp_v2): Likewise. |
| (lookup_dwo_unit_in_dwp): Likewise. |
| (try_open_dwop_file): Likewise. |
| (open_dwo_file): Likewise. Use dwarf2_per_objfile from cu. |
| (open_and_init_dwo_file): Use dwarf2_per_objfile from cu, update |
| cleanup to include a reference to dwarf2_per_objfile. |
| (open_dwp_file): Add dwarf2_per_objfile parameter. |
| (open_and_init_dwp_file): Likewise. |
| (get_dwp_file): Likewise. |
| (lookup_dwo_cutu): Use dwarf2_per_objfile from cu. |
| (queue_and_load_all_dwo_tus): Update call. |
| (free_dwo_file_cleanup): Use dwarf2_per_objfile from cleanup |
| data. |
| (dwarf2_rnglists_process): Use dwarf2_per_objfile from cu. |
| (dwarf2_ranges_process): Likewise. |
| (dwarf2_get_pc_bounds): Likewise. |
| (mark_common_block_symbol_computed): Likewise. |
| (abbrev_table_read_table): Add dwarf2_per_objfile parameter. |
| (dwarf2_read_abbrevs): Update call. |
| (read_partial_die): Use dwarf2_per_objfile from cu. |
| (find_partial_die): Likewise. |
| (fixup_partial_die): Likewise. |
| (read_attribute_value): Likewise. |
| (read_indirect_string_at_offset_from): Add objfile parameter. |
| (read_indirect_string_at_offset): Add dwarf2_per_objfile |
| parameter. |
| (read_indirect_string_from_dwz): Add objfile parameter. |
| (read_indirect_string): Add objfile parameter. |
| (read_addr_index_1): Add dwarf2_per_objfile parameter. |
| (read_addr_index): Use dwarf2_per_objfile from cu. |
| (dwarf2_read_addr_index): Use dwarf2_per_objfile from cu, don't |
| call dw2_setup. |
| (read_str_index): Use dwarf2_per_objfile from cu. |
| (get_debug_line_section): Likewise. |
| (read_formatted_entries): Add dwarf2_per_objfile parameter. |
| (dwarf_decode_line_header): Use dwarf2_per_objfile from cu. |
| (new_symbol_full): Use dwarf2_per_objfile from cu. |
| (build_error_marker_type): Likewise. |
| (lookup_die_type): Likewise. |
| (determine_prefix): Likewise. |
| (follow_die_offset): Likewise. |
| (dwarf2_fetch_die_loc_sect_off): Use get_dwarf2_per_objfile. |
| (dwarf2_fetch_constant_bytes): Don't call dw2_setup. |
| (dwarf2_fetch_die_type_sect_off): Likewise. |
| (dwarf2_get_die_type): Likewise. |
| (follow_die_sig_1): Use dwarf2_per_objfile from cu. |
| (get_signatured_type): Likewise. |
| (get_DW_AT_signature_type): Likewise. |
| (dwarf_decode_macro_bytes): Add dwarf2_per_objfile parameter. |
| (dwarf_decode_macros): Use dwarf2_per_objfile from cu. |
| (cu_debug_loc_section): Likewise. |
| (fill_in_loclist_baton): Likewise. |
| (dwarf2_symbol_mark_computed): Likewise. |
| (dwarf2_find_containing_comp_unit): Change objfile parameter to |
| dwarf2_per_objfile. |
| (free_cached_comp_units): Use dwarf2_per_objfile passed in void* |
| parameter. |
| (age_cached_comp_units): Add dwarf2_per_objfile parameter. |
| (free_one_cached_comp_unit): Use dwarf2_per_objfile from cu. |
| (dwarf2_free_objfile): Use get_dwarf2_per_objfile. |
| (set_die_type): Use dwarf2_free_objfile from cu. |
| (get_die_type_at_offset): Likewise. |
| (dwarf2_per_objfile_free): Don't assign global variable. |
| (debug_names) <constructor>: Add dwarf2_per_objfile |
| parameter, update m_debugstrlookup construction. |
| (debug_names::debug_str_lookup): Add dwarf2_per_objfile |
| parameter. |
| <m_dwarf2_per_objfile>: New field. |
| <lookup>: Use m_dwarf2_per_objfile. |
| (check_dwarf64_offsets): Add dwarf2_per_objfile parameter. |
| (psyms_seen_size): Likewise. |
| (write_gdbindex): Replace objfile parameter with |
| dwarf2_per_objfile. |
| (write_debug_names): Likewise. |
| (write_psymtabs_to_index): Likewise. |
| (save_gdb_index_command): Use get_dwarf2_per_objfile, update |
| calls. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * dwarf2read.c (struct dwarf2_cu) <objfile>: Remove. |
| <dwarf2_per_objfile>: New field. |
| (struct dwarf2_per_cu_data) <objfile>: Remove. |
| <dwarf2_per_objfile>: New field. |
| (create_cu_from_index_list): Assign dwarf2_per_objfile instead |
| of objfile. |
| (create_signatured_type_table_from_index): Likewise. |
| (create_debug_type_hash_table): Likewise. |
| (fill_in_sig_entry_from_dwo_entry): Likewise. |
| (lookup_dwo_unit): Access objfile through dwarf2_per_objfile. |
| (create_type_unit_group): Assign dwarf2_per_objfile instead of |
| objfile. |
| (create_partial_symtab): Access objfile through |
| dwarf2_per_objfile. |
| (process_psymtab_comp_unit_reader): Likewise. |
| (read_comp_units_from_section): Likewise. |
| (scan_partial_symbols): Likewise. |
| (add_partial_symbol): Likewise. |
| (add_partial_subprogram): Likewise. |
| (peek_die_abbrev): Likewise. |
| (fixup_go_packaging): Likewise. |
| (process_full_comp_unit): Likewise. |
| (process_full_type_unit): Likewise. |
| (process_imported_unit_die): Likewise. |
| (dwarf2_compute_name): Likewise. |
| (dwarf2_physname): Likewise. |
| (read_import_statement): Likewise. |
| (create_cus_hash_table): Assign dwarf2_physname instead of |
| objfile. |
| (read_func_scope): Access objfile through dwarf2_per_objfile. |
| (read_lexical_block_scope): Likewise. |
| (read_call_site_scope): Likewise. |
| (read_variable): Likewise. |
| (dwarf2_rnglists_process): Likewise. |
| (dwarf2_ranges_process): Likewise. |
| (dwarf2_ranges_read): Likewise. |
| (dwarf2_record_block_ranges): Likewise. |
| (dwarf2_add_field): Likewise. |
| (dwarf2_add_member_fn): Likewise. |
| (read_structure_type): Likewise. |
| (process_structure_scope): Likewise. |
| (read_enumeration_type): Likewise. |
| (read_array_type): Likewise. |
| (read_common_block): Likewise. |
| (read_namespace_type): Likewise. |
| (read_namespace): Likewise. |
| (read_module_type): Likewise. |
| (read_tag_pointer_type): Likewise. |
| (read_tag_ptr_to_member_type): Likewise. |
| (read_tag_string_type): Likewise. |
| (read_subroutine_type): Likewise. |
| (read_typedef): Likewise. |
| (read_base_type): Likewise. |
| (attr_to_dynamic_prop): Likewise. |
| (read_subrange_type): Likewise. |
| (read_unspecified_type): Likewise. |
| (load_partial_dies): Likewise. |
| (read_partial_die): Likewise. |
| (find_partial_die): Likewise. |
| (guess_partial_die_structure_name): Likewise. |
| (fixup_partial_die): Likewise. |
| (read_attribute_value): Likewise. |
| (read_addr_index_from_leb128): Likewise. |
| (dwarf2_read_addr_index): Likewise. |
| (dwarf2_string_attr): Likewise. |
| (lnp_state_machine::check_line_address): Likewise. |
| (dwarf_decode_lines_1): Likewise. |
| (dwarf_decode_lines): Likewise. |
| (dwarf2_start_symtab): Likewise. |
| (var_decode_location): Likewise. |
| (new_symbol_full): Likewise. |
| (dwarf2_const_value_data): Likewise. |
| (dwarf2_const_value_attr): Likewise. |
| (dwarf2_const_value): Likewise. |
| (die_type): Likewise. |
| (die_containing_type): Likewise. |
| (lookup_die_type): Likewise. |
| (guess_full_die_structure_name): Likewise. |
| (anonymous_struct_prefix): Likewise. |
| (dwarf2_name): Likewise. |
| (follow_die_ref_or_sig): Likewise. |
| (follow_die_offset): Likewise. |
| (follow_die_ref): Likewise. |
| (dwarf2_fetch_die_loc_sect_off): Likewise. |
| (dwarf2_fetch_constant_bytes): Likewise. |
| (dwarf2_fetch_die_type_sect_off): Likewise. |
| (dwarf2_get_die_type): Likewise. |
| (follow_die_sig): Likewise. |
| (decode_locdesc): Likewise. |
| (dwarf2_per_cu_objfile): Likewise. |
| (dwarf2_per_cu_text_offset): Likewise. |
| (init_one_comp_unit): Assign dwarf2_per_objfile instead of |
| objfile. |
| (set_die_type): Access objfile through |
| dwarf2_per_objfile. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * valprint.c (converted_character_d): Remove typedef. |
| (DEF_VEC_O (converted_character_d)): Remove. |
| (count_next_character): Use std::vector. |
| (print_converted_chars_to_obstack): Likewise. |
| (generic_printstr): Likewise. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * xml-support.h (struct gdb_xml_value): Add constructor. |
| <value>: Change type to unique_xmalloc_ptr. |
| (gdb_xml_value_s): Remove typedef. |
| (DEF_VEC_O (gdb_xml_value_s)): Remove. |
| (gdb_xml_element_start_handler): Change parameter type to |
| std::vector. |
| (xml_find_attribute): Likewise. |
| * xml-support.c (xml_find_attribute): Change parameter type to |
| std::vector and adjust. |
| (gdb_xml_values_cleanup): Remove. |
| (gdb_xml_parser::start_element): Adjust to std::vector. |
| (xinclude_start_include): Change paraeter type to std::vector |
| and adjust. |
| * btrace.c (check_xml_btrace_version): Likewise. |
| (parse_xml_btrace_block): Likewise. |
| (parse_xml_btrace_pt_config_cpu): Likewise. |
| (parse_xml_btrace_pt): Likewise. |
| (parse_xml_btrace_conf_bts): Likewise. |
| (parse_xml_btrace_conf_pt): Likewise. |
| * memory-map.c (memory_map_start_memory): Likewise. |
| (memory_map_start_property): Likewise. |
| * osdata.c (osdata_start_osdata): Likewise. |
| (osdata_start_item): Likewise. |
| (osdata_start_column): Likewise. |
| * remote.c (start_thread): Likewise. |
| * solib-aix.c (library_list_start_library): Likewise. |
| (library_list_start_list): Likewise. |
| * solib-svr4.c (library_list_start_library): Likewise. |
| (svr4_library_list_start_list): Likewise. |
| * solib-target.c (library_list_start_segment): Likewise. |
| (library_list_start_section): Likewise. |
| (library_list_start_library): Likewise. |
| (library_list_start_list): Likewise. |
| * tracepoint.c (traceframe_info_start_memory): Likewise. |
| (traceframe_info_start_tvar): Likewise. |
| * xml-syscall.c (syscall_start_syscall): Likewise. |
| * xml-tdesc.c (tdesc_start_target): Likewise. |
| (tdesc_start_feature): Likewise. |
| (tdesc_start_reg): Likewise. |
| (tdesc_start_union): Likewise. |
| (tdesc_start_struct): Likewise. |
| (tdesc_start_flags): Likewise. |
| (tdesc_start_enum): Likewise. |
| (tdesc_start_field): Likewise. |
| (tdesc_start_enum_value): Likewise. |
| (tdesc_start_vector): Likewise. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * extension.h (struct xmethod_worker) <clone>: Remove. |
| * python/py-xmethods.c (struct python_xmethod_worker) <clone>: |
| Remove. |
| (python_xmethod_worker::clone): Remove. |
| * valops.c (find_overload_match): Use std::move instead of |
| clone. |
| |
| 2018-01-07 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * extension-priv.h (enum ext_lang_rc): Remove, move to extension.h. |
| (struct extension_language_ops) <clone_xmethod_worker_data>: Remove. |
| <free_xmethod_worker_data>: Remove. |
| <get_matching_xmethod_workers>: Chance VEC to std::vector. |
| <get_xmethod_arg_types>: Remove. |
| <get_xmethod_result_type>: Remove. |
| <invoke_xmethod>: Remove. |
| * extension.c (new_xmethod_worker): Remove. |
| (clone_xmethod_worker): Remove. |
| (get_matching_xmethod_workers): Return void, pass std::vector by |
| pointer. |
| (get_xmethod_arg_types): Rename to... |
| (xmethod_worker::get_arg_types): ... this, and adjust. |
| (get_xmethod_result_type): Rename to... |
| (xmethod_worker::get_result_type): ... this, and adjust. |
| (invoke_xmethod): Remove. |
| (free_xmethod_worker): Remove. |
| (free_xmethod_worker_vec): Remove. |
| * extension.h (enum ext_lang_rc): Move here from |
| extension-priv.h. |
| (struct xmethod_worker): Add constructor and destructor. |
| <data>: Remove. |
| <value>: Remove. |
| <invoke, clone, do_get_result_type, do_get_arg_types>: New |
| virtual pure methods. |
| <get_arg_types, get_result_type>: New methods. |
| (xmethod_worker_ptr): Remove typedef. |
| (DEF_VEC_P (xmethod_worker_ptr)): Remove. |
| (xmethod_worker_vec): Remove typedef. |
| (xmethod_worker_up): New typedef. |
| (invoke_xmethod): Remove. |
| (clone_xmethod_worker): Remove. |
| (free_xmethod_worker): Remove. |
| (free_xmethod_worker_vec): Remove. |
| (get_xmethod_arg_types): Remove. |
| (get_xmethod_result_type): Remove. |
| * valops.c (find_method_list): Use std::vector, don't use |
| intermediate vector. |
| (value_find_oload_method_list): Use std::vector. |
| (find_overload_match): Use std::vector. |
| (find_oload_champ): Use std::vector. |
| * value.c (value_free): Use operator delete. |
| (value_of_xmethod): Rename to... |
| (value_from_xmethod): ... this. Don't assign |
| xmethod_worker::value, take rvalue-reference. |
| (result_type_of_xmethod): Adjust. |
| (call_xmethod): Adjust. |
| * value.h: Include extension.h. |
| (struct xmethod_worker): Don't forward-declare. |
| (value_of_xmethod): Rename to... |
| (value_from_xmethod): ... this, take rvalue-reference. |
| * python/py-xmethods.c (struct gdbpy_worker_data): Rename to... |
| (struct python_xmethod_worker): ... this, add constructor and |
| destructor. |
| <invoke, clone, do_get_arg_types, do_get_result_type>: Implement. |
| (gdbpy_free_xmethod_worker_data): Rename to... |
| (python_xmethod_worker::~python_xmethod_worker): ... this and |
| adjust. |
| (gdbpy_clone_xmethod_worker_data): Rename to... |
| (python_xmethod_worker::clone): ... this and adjust. |
| (gdbpy_get_matching_xmethod_workers): Use std::vector, don't use |
| temporary vector. |
| (gdbpy_get_xmethod_arg_types): Rename to... |
| (python_xmethod_worker::do_get_arg_types): ... this and adjust. |
| (gdbpy_get_xmethod_result_type): Rename to... |
| (python_xmethod_worker::do_get_result_type): ... this and |
| adjust. |
| (gdbpy_invoke_xmethod): Rename to... |
| (python_xmethod_worker::invoke): ... this and adjust. |
| (new_python_xmethod_worker): Rename to... |
| (python_xmethod_worker::python_xmethod_worker): ... this and |
| adjust. |
| * python/python-internal.h (gdbpy_clone_xmethod_worker_data): |
| Remove. |
| (gdbpy_free_xmethod_worker_data): Remove. |
| (gdbpy_get_matching_xmethod_workers): Use std::vector. |
| (gdbpy_get_xmethod_arg_types): Remove. |
| (gdbpy_get_xmethod_result_type): Remove. |
| (gdbpy_invoke_xmethod): Remove. |
| * python/python.c (python_extension_ops): Remove obsolete |
| callbacks. |
| |
| 2018-01-05 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/18653 |
| * common/signals-state-save-restore.c |
| (save_original_signals_state): New parameter 'quiet'. Warn if we |
| find a custom handler preinstalled, instead of internal erroring. |
| But only warn if !quiet. |
| * common/signals-state-save-restore.h |
| (save_original_signals_state): New parameter 'quiet'. |
| * main.c (captured_main_1): Move save_original_signals_state call |
| after option handling, and pass QUIET. |
| |
| 2018-01-05 Pedro Alves <palves@redhat.com> |
| |
| * spu-tdep.c (spu_catch_start): Pass |
| symbol_name_match_type::SEARCH_NAME to block_lookup_symbol. |
| |
| 2018-01-05 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/22670 |
| * ada-lang.c (literal_symbol_name_matcher): New function. |
| (ada_get_symbol_name_matcher): Use it for |
| symbol_name_match_type::SEARCH_NAME. |
| * block.c (block_lookup_symbol): New parameter 'match_type'. Pass |
| it down instead of assuming symbol_name_match_type::FULL. |
| * block.h (block_lookup_symbol): New parameter 'match_type'. |
| * c-valprint.c (print_unpacked_pointer): Use |
| lookup_symbol_search_name instead of lookup_symbol. |
| * compile/compile-object-load.c (get_out_value_type): Pass down |
| symbol_name_match_type::SEARCH_NAME. |
| * cp-namespace.c (cp_basic_lookup_symbol): Pass down |
| symbol_name_match_type::FULL. |
| * cp-support.c (cp_get_symbol_name_matcher): Handle |
| symbol_name_match_type::SEARCH_NAME. |
| * infrun.c (insert_exception_resume_breakpoint): Use |
| lookup_symbol_search_name. |
| * p-valprint.c (pascal_val_print): Use lookup_symbol_search_name. |
| * psymtab.c (maintenance_check_psymtabs): Use |
| symbol_name_match_type::SEARCH_NAME and SYMBOL_SEARCH_NAME. |
| * stack.c (print_frame_args): Use lookup_symbol_search_name and |
| SYMBOL_SEARCH_NAME. |
| * symtab.c (lookup_local_symbol): Don't demangle the lookup name |
| if symbol_name_match_type::SEARCH_NAME. |
| (lookup_symbol_in_language): Pass down |
| symbol_name_match_type::FULL. |
| (lookup_symbol_search_name): New. |
| (lookup_language_this): Pass down |
| symbol_name_match_type::SEARCH_NAME. |
| (lookup_symbol_aux, lookup_local_symbol): New parameter |
| 'match_type'. Pass it down. |
| * symtab.h (symbol_name_match_type::SEARCH_NAME): New enumerator. |
| (lookup_symbol_search_name): New declaration. |
| (lookup_symbol_in_block): New 'match_type' parameter. |
| |
| 2018-01-05 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/22670 |
| * ada-lang.c (ada_lookup_encoded_symbol): Reimplement in terms of |
| ada_lookup_symbol. |
| (ada_lookup_symbol): Reimplement in terms of |
| ada_lookup_symbol_list, bits factored out from |
| ada_lookup_encoded_symbol. |
| |
| 2018-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-exp.y (write_object_renaming): When subscripting an array |
| using a symbol as the index, pass the block in call to |
| ada_lookup_encoded_symbol when looking that symbol up. |
| |
| 2018-01-05 Jerome Guitton <guitton@adacore.com> |
| |
| * ada-lang.c (ada_array_length): Use ada_index_type instead of |
| TYPE_INDEX_TYPE. |
| |
| 2018-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_to_fixed_value_create): Add handling of |
| the case where VALUE_LVAL (val0) is not lval_memory. |
| |
| 2018-01-05 Xavier Roirand <roirand@adacore.com> |
| |
| * ada-valprint.c (print_optional_low_bound): Handle |
| character-indexed array printing like boolean-indexed array |
| printing. |
| |
| 2018-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Create a new section for the next release branch. |
| Rename the section of the current branch, now that it has |
| been cut. |
| |
| 2018-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 8.1 branch created (5219ac6237c272b938c28517bf371429260c71e7): |
| * version.in: Bump version to 8.1.50.DATE-git. |
| |
| 2018-01-03 Xavier Roirand <roirand@adacore.com> |
| |
| * ada-lang.h (ada_exception_catchpoint_kind) <ada_catch_handlers>: |
| Add field. |
| * ada-lang.c (struct exception_support_info) <catch_handlers_sym>: |
| Add field. |
| (default_exception_support_info) <catch_handlers_sym>: Add field. |
| (exception_support_info_fallback) <catch_handlers_sym>: Add field. |
| (ada_exception_name_addr_1): Add "catch handlers" handling. |
| (ada_exception_catchpoint_cond_string) <ex>: New parameter. |
| Update all callers. |
| (create_excep_cond_exprs) <ex>: Add parameter. |
| (re_set_exception): Update create_excep_cond_exprs call. |
| (print_it_exception, print_one_exception, print_mention_exception) |
| (print_recreate_exception): Add "catch handler" handling. |
| (allocate_location_catch_handlers, re_set_catch_handlers) |
| (check_status_catch_handlers, print_it_catch_handlers) |
| (print_one_catch_handlers, print_mention_catch_handlers) |
| (print_recreate_catch_handlers): New function. |
| (catch_handlers_breakpoint_ops): New variable. |
| (catch_ada_exception_command_split) <is_catch_handlers_cmd>: |
| Add parameter. Add "catch handler" handling. |
| (ada_exception_sym_name, ada_exception_breakpoint_ops): |
| Add "catch handler" handling. |
| (ada_exception_catchpoint_cond_string): Add "catch handler" |
| handling. |
| (create_ada_exception_catchpoint): Update create_excep_cond_exprs |
| call. |
| (catch_ada_handlers_command): New function. |
| (initialize_ada_catchpoint_ops): Initialize "catch handlers" |
| operations structure. |
| (_initialize_ada_language): Add "catch handlers" command entry. |
| * NEWS: Document "catch handlers" feature. |
| |
| 2018-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_value_slice_from_ptr): Take array stride into |
| account when creating the array type of the slice. |
| (ada_value_slice): Likewise. |
| |
| 2018-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_BYTE_STRIDE>: |
| New enum value. |
| (create_array_type_with_stride): Add byte_stride_prop parameter. |
| * gdbtypes.c (create_array_type_with_stride) <byte_stride_prop>: |
| New parameter. Update all callers in this file. |
| (array_type_has_dynamic_stride): New function. |
| (is_dynamic_type_internal, resolve_dynamic_array): Add handling |
| of arrays with dynamic byte strides. |
| * dwarf2read.c (read_array_type): Add support for dynamic |
| DW_AT_byte_stride attributes. |
| |
| 2018-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (read_unspecified_type): Treat |
| DW_TAG_enumeration_type DIEs from Ada units as stubs. |
| |
| 2018-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Update copyright year range in all GDB files. |
| |
| 2018-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * copyright.py (BY_HAND): Remove gdb/testsuite/gdb.base/step-line.inp |
| and gdb/testsuite/gdb.base/step-line.c. |
| |
| 2018-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * copyright.py (main): Dump the contents of |
| MULTIPLE_COPYRIGHT_HEADERS (separately) from BY_HAND, |
| even if BY_HAND is empty. |
| |
| 2018-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update Copyright year in version |
| message. |
| |
| 2018-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2017. |
| |
| For older changes see ChangeLog-2017. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |
