gdb/gdbserver/gdbfreeplay-back.c

/*
 * gdbfreeplay-back.c
 *
 * Backend for gdbfreeplay.
 */

#include "config.h"
#include <stdio.h>
#include <ctype.h>
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_STRING_H
#include <string.h>
#endif

typedef struct STOPFRAME {
  /* frame_id -- a unique identifier per stop frame.  */
  unsigned int frame_id;
  /* pc -- address of the next instruction to be "executed".  */
  unsigned long long pc;
  /* FIXME remove! predecr_pc -- address that will be reported by a breakpoint.
     These two are different on some targets, see gdb source code,
     DECR_PC_AFTER_BREAK.  */
  unsigned long long predecr_pc;
  unsigned long eventpos;
  unsigned long Opos;
} StopFrame;

StopFrame *stopframe;
int last_cached_frame = 0;
int framecache_size = 0;
int cur_frame = -1;

#include "gdbfreeplay.h"

/*
 * scan_gdbreplay_file
 *
 * Make a pass through the replay log, noting the positions
 * of the stop events and certain packets within them.
 *
 * Returns: FAIL, PASS.
 */

#define INBUF_SIZE 4096
static char inbuf[INBUF_SIZE];

#define GDB_LINEBUF_SIZE 4096
static char gdb_linebuf[GDB_LINEBUF_SIZE];

static enum successcode
scan_gdbreplay_file (FILE *infile)
{
  /* Make a pass over the entire file -- cache the record positions.  */
  char *line, *p;
  unsigned long nextpos;
  unsigned long long GPC;

  /* First skip empty lines.  */
  do {
    nextpos = ftell (infile);
    line = fgets (inbuf, sizeof (inbuf), infile);
  } while (line != NULL && inbuf[0] == '\n');

  if (line == NULL)
    return FAIL;		/* End of file, nothing there.  */

  /* Now for the main loop.
   *
   * Scan the rest of the file, recording stop events etc.
   */
  do {
    /* 'g' packet message?  */
    if (strstr (line, "$g#67") != NULL)
      {
	/* See if we need to grab the PC from this packet.  */
	if (stopframe[last_cached_frame].pc == 0 ||
	    stopframe[last_cached_frame].pc == (unsigned long long) -1)
	  {
	    nextpos = ftell (infile);
	    line = fgets (inbuf, sizeof (inbuf), infile);
	    stopframe[last_cached_frame].pc = target_pc_from_g (line);
	  }
      }

    /* Reset PC after breakpoint?  */
    else if ((p = strstr (line, "$G")) != NULL)
      {
	GPC = target_pc_from_G (p);
	if (stopframe[last_cached_frame].pc == 0 ||
	    stopframe[last_cached_frame].pc == (unsigned long long) -1)
	  {
	    /* Unlikely, but if we need to, we can just grab this PC.  */
	    stopframe[last_cached_frame].pc = GPC;
	  }
	else if (stopframe[last_cached_frame].pc == GPC + 1)
	  {
	    /* FIXME remove!  */
	    /* OK, this is gdb decrementing the PC after a breakpoint.  */
	    stopframe[last_cached_frame].predecr_pc =
	      stopframe[last_cached_frame].pc;
	    stopframe[last_cached_frame].pc = GPC;
	  }
      }

    /* 'O' packet(s)?  Watch out for "$OK", we don't want that.  */
    else if ((p = strstr (line, "$O")) != NULL &&
	     strstr (p, "$OK#9a") == NULL)
      {
	/* If we know these, we can feed them back to gdb
	   during 'continue'.  */
	stopframe[last_cached_frame].Opos = nextpos;
      }

    /* Stop event message?  */
    else if ((p = strstr (line, "$T")) != NULL ||
	     (p = strstr (line, "$S")) != NULL ||
	     (p = strstr (line, "$W")) != NULL)
      /* FIXME || (p = strstr (line, "$X")) != NULL) 
	 (ambiguity with binary write X packet).  */
      {
	if (last_cached_frame >= framecache_size - 1)
	  {
	    /* Time to grow the frame cache buffer.  */
	    framecache_size += 2048;
	    if (verbose)
	      fprintf (stdout, "Growing frame cache to %d\n", 
		       framecache_size);
	    stopframe = realloc (stopframe, 
				 framecache_size * sizeof (stopframe[0]));
	  }
	/* Special case: 0th frame.

	   On the first pass, the FIRST time I see a stop event
	   for the 0th frame, I will not increment the stopframe
	   index.  

	   The 0th frame is special, in that its "stop event"
	   happens not as a result of a real stop event, but
	   as a result of gdb sending the "?" query.  Therefore
	   the apparent event falls in the middle of the frame.
	*/

	if (last_cached_frame != 0 ||
	    stopframe [last_cached_frame].eventpos != 0)
	  last_cached_frame++;

	/* Since we now have a known frame, default to using it.  */
	cur_frame = 0;
	stopframe[last_cached_frame].eventpos = nextpos + p - line;
	/* The frame for this event will default to not having 
	   any 'O' packets, until we recognize one.  */
	stopframe[last_cached_frame].Opos = 0;

	if (p[1] == 'T')
	  stopframe[last_cached_frame].pc = target_pc_from_T (p);

	if (verbose)
	  fprintf (stdout, "Record event pos at %lu ('%c')\n",
		   stopframe [last_cached_frame].eventpos,
		   p[1]);
      }
    nextpos = ftell (infile);
    line = fgets (inbuf, sizeof (inbuf), infile);
  } while (line != NULL);
    
  return PASS;
}

/*
 * gdbfreeplay_open
 *
 * Open the gdbfreeplay "target", which mainly means opening 
 * the gdbreplay log file.
 *
 * Returns: FAIL, PASS.
 */

static FILE *replay_file;

enum successcode
gdbfreeplay_open (char *filename)
{
  if ((replay_file = fopen (filename, "r")) == NULL)
    {
      fprintf (stderr, "GDBFREEPLAY: could not open file %s for input.\n",
	       filename);
      return FAIL;
    }

  return scan_gdbreplay_file (replay_file);
}

/*
 * gdbreadline 
 *
 * Read a line of input from gdb (from the socket).
 */

static char *
gdbreadline (int fd)
{
  char *p = gdb_linebuf;
  int saw_dollar = 0;
  int saw_pound = 0;
  int cksum_chars = 0;

  while (p < gdb_linebuf + sizeof (gdb_linebuf) - 1)
    {
      read (fd, p, 1);
      p[1] = '\0';
      switch (p[0]) {
      case '+':
	/* Receive "ack" from gdb.  
	   Assuming it is first char in buffer, ignore.  */
	if (p - gdb_linebuf != 0)
	  fprintf (stdout, "gdbreadline: '+' ack in middle of line?\n");
	continue;
	break;
      case '-':
	if (p - gdb_linebuf == 0)
	  {
	    /* Receive "nack" from gdb.  FIXME what to do?

	       Generally, this isn't going to be because of a 
	       communication drop-out, but because gdb simply
	       did not like the last thing that we sent.

	       Sending the same thing again probably isn't going to help...
	     */
	    return gdb_linebuf;
	  }
	goto default_label;
	break;
      case '$':
	if (saw_dollar)
	  fprintf (stdout, "gdbreadline: two '$' in one line:\n\t'%s'\n",
		   gdb_linebuf);

	saw_dollar = 1;
	break;
      case '#':
	if (!saw_dollar)
	  fprintf (stdout, "gdbreadline: '#' before '$':\n\t'%s'\n",
		   gdb_linebuf);

	if (saw_pound)
	  fprintf (stdout, "gdbreadline: two '#' in one line:\n\t'%s'\n",
		   gdb_linebuf);

	saw_pound = 1;
	break;
      default:
      default_label:
	if (saw_pound)
	  cksum_chars++;
	if (cksum_chars >= 2)
	  {
	    /* Got a complete message.  */
	    return gdb_linebuf;
	  }
	break;
      }
      ++p;
    }
  /* Shouldn't get here except for buffer overflow.  */
  fprintf (stdout, "gdbreadline: buffer overflow?\n");
  return gdb_linebuf;
}

/*
 * find_reply
 *
 * Given a filepos pointing to just after a given gdb request, 
 * find and return a char * containing the reply to that request.
 *
 * Return NULL on failure.
 */

static char *
find_reply (FILE *logfile, long filepos)
{
  char *line;

  if (filepos == -1)
    return NULL;

  /* Position the file (it's probably already there...)  */
  fseek (logfile, filepos, SEEK_SET);
  /* In principle, the next input line should contain the reply.  */
  line = fgets (inbuf, sizeof (inbuf), logfile);

  return line;
}

/*
 * frame_find_request
 *
 * Given a request from gdb, in the form of a string, 
 * find an identical request within the current frame
 * of the gdbreplay log file.
 *
 * Return a file position immediately following the request.
 */

static long
frame_find_request (FILE *logfile, char *request)
{
  long curpos;
  char *line;

  if (cur_frame >= 0)
    {
      /* Position the input at the beginning of the frame.  
         SPECIAL CASE: for frame zero, go to the beginning of the log.  
	 This is so we can find gdb requests that preceed the first
	 stop-event message.
      */
      if (cur_frame == 0)
	curpos = 0;
      else
	curpos = stopframe[cur_frame].eventpos;
      fseek (logfile, curpos, SEEK_SET);
      /* Now search for a matching request.  */
      while ((line = fgets (inbuf, sizeof (inbuf), logfile)) != NULL)
	{
	  /* End of current frame?
	     If we're the last frame, just read till the end of file.  */
	  if (cur_frame < last_cached_frame &&
	      curpos >= stopframe[cur_frame + 1].eventpos)
	    break;
	  curpos = ftell (logfile);
	  if (strstr (line, request) != NULL)
	    {
	      /* Matching request found.  Return position.  */
	      return curpos;
	    }
	}
    }

  /* Not found.  */
  return -1;
}

/*
 * gdb_ack
 * 
 * Send an ack to gdb.
 * Returns void.
 */

static void
gdb_ack (int fd)
{
  static const char *ack = "+";
  write (fd, ack, 1);
}

/*
 * hex_to_int
 */

int 
hex_to_int (int c)
{
  if (c >= '0' && c <= '9')
    return c - '0';
  else if (c >= 'a' && c <= 'f')
    return c - 'a' + 10;
  else if (c >= 'A' && c <= 'F')
    return c - 'F' + 10;
  else
    return 0;
}

/*
 * int_to_hex
 *
 * (lifted from gdb)
 */

int 
int_to_hex (int nib)
{
  if (nib < 10)
    return '0' + nib;
  else
    return 'a' + nib - 10;
}

#define EOI 0xdeadbeef

/*
 * convert_logchar
 *
 * Adapted from gdbreplay.
 * Some characters in the log are escaped, and
 * need to be translated before being sent back
 * to gdb.
 *
 * Returns a de-escaped char.
 */

static int
convert_logchar (char **logp)
{
  int ch, ch2;

  ch = *(*logp)++;
  switch (ch)
    {
    case '\0':
    case '\n':
      ch = EOI;	/* End of input (out of band).  */
      break;
    case '\\':
      ch = *(*logp)++;
      switch (ch)
	{
	case '\\':
	  break;
	case 'b':
	  ch = '\b';
	  break;
	case 'f':
	  ch = '\f';
	  break;
	case 'n':
	  ch = '\n';
	  break;
	case 'r':
	  ch = '\r';
	  break;
	case 't':
	  ch = '\t';
	  break;
	case 'v':
	  ch = '\v';
	  break;
	case 'x':
	  ch2 = *(*logp)++;
	  ch = hex_to_int (ch2) << 4;
	  ch2 = *(*logp)++;
	  ch |= hex_to_int (ch2);
	  break;
	default:
	  /* Treat any other char as just itself */
	  break;
	}
    default:
      break;
    }
  return (ch);
}

/*
 * gdbwriteline
 *
 * Send a line of data to gdb, stripped of any 
 * prefix or suffix stuff.
 *
 * Prefix is anything preceeding a '$'.
 * Suffix is anything following a "#xx" (including any newlines).
 *
 * Returns void.
 */

static void
gdbwriteline (int fd, char *line)
{
  char *end;
  int ich;
  char ch;

  if (line)
    {
      /* Strip prefix.  */
      while (*line && *line != '$')
	line++;
      if (*line)
	{
	  /* Strip suffix.  */
	  end = strchr (line, '#');
	  if (end && *end)
	    {
	      /* Got line, send it.  */
	      end[3] = '\0';
	      while ((ich = convert_logchar (&line)) != EOI)
		{
		  ch = ich;
		  write (fd, &ch, 1);
		}
	    }
	}
    }
}

/*
 * stopframe_signal
 *
 * Return the signal number for which the stopframe stopped.
 * This is a brute force implementation.  Probably should plan
 * on caching the value to speed things up.
 */

static int
stopframe_signal (FILE *infile, int id)
{
  char *line, *p;
  int sig;

  fseek (infile, stopframe[id].eventpos, SEEK_SET);
  line = fgets (inbuf, sizeof (inbuf), infile);

  if ((p = strstr (line, "$T")) != NULL ||
      (p = strstr (line, "$S")) != NULL)
    {
      /* Signal value is two ascii/hex bytes following "$S" or "$T".  */
      sig = (hex_to_int (p[2]) << 4) + hex_to_int (p[3]);
      return sig;
    }
  return 0;
}

/*
 * freeplay_play_O_packets
 *
 * Send one or more 'O' packets back to gdb.
 * Returns void.
 */

static void
freeplay_play_O_packets (FILE *infile, int fd, unsigned long filepos)
{
  char *line, *p;

  fseek (infile, filepos, SEEK_SET);

  while ((line = fgets (inbuf, sizeof (inbuf), infile)) != NULL)
    {
      if ((p = strstr (line, "$O")) != NULL)
	{
	  /* FIXME: do I need to send an ACK?  */
	  gdb_ack (fd);
	  gdbwriteline (fd, p);
	}
      /* When we reach the next stop event, we're done.  */
      else if (strstr (line, "$T") != NULL ||
	       strstr (line, "$S") != NULL)
	{
	  return;	/* done */
	}
    }
}

/*
 * freeplay_find_event
 *
 * Scan (forward or backward) thru the stop events, 
 * looking for a reason to stop now (assuming gdb has
 * asked us to continue).
 *
 * Returns event frame index, or -1 for failure.
 */

static int
freeplay_find_event (FILE *infile, 
		     int gdb_fd, 
		     int start, 
		     enum direction_code direction,
		     enum direction_code play_O_packets)
{
  int i;
  int signum;

  /* Right here, we have to be conscious of the critical difference
     between a replayer and a simulator.  

     No matter what the reason for stopping, we MUST advance
     beyond the current frame.  Which is not the same as 
     advancing beyond the current PC.  If, say, there is a
     reason why we can't advance beyond the current PC (like
     say it's an illegal instruction), then the next frame will
     contain the same PC and the same signal.

     But we cannot just get stuck at the current stop event.
     We have to advance (or go backward, as the case may be),
     until and unles we hit the end of the recording.

     So, force the first step.
  */

  if (play_O_packets && stopframe[start].Opos != 0)
    freeplay_play_O_packets (infile, gdb_fd, stopframe[start].Opos);
  if (direction == DIR_FORWARD && start < last_cached_frame)
    start++;
  else if (direction == DIR_BACKWARD && start > 0)
    start--;

  /* Here's a strange loop for you: goes forward or backward.  */
  for (i = start; 
       i >= 0 && i <= last_cached_frame;
       direction == DIR_FORWARD ? i++ : i--)
    {
      signum = stopframe_signal (infile, i);
      /* FIXME we need some modal handling for SIGTRAP.  */
      if (signum != 0 && signum != 5)
	{
	  /* Here's an event we can stop at, regardless of breakpoints.  */
	  /* FIXME: there is some signal-ignoring stuff to be looked at.  */
	  return i;
	}
      else if (remote_breakpoint_here_p (SOFTWARE_BP, stopframe[i].pc) == PASS)
	{
	  /* Found a breakpoint.
	     FIXME need some DECR_PC_AFTER_BREAK handling.  */
	  return i;
	}
      if (play_O_packets && stopframe[i].Opos != 0)
	freeplay_play_O_packets (infile, gdb_fd, stopframe[i].Opos);
    }
  /* Found no reason to stop.  */
  return -1;
}

/*
 * add_checksum
 *
 * Compute the checksum for a string that will go to gdb, 
 * and concatenate it onto the string.
 *
 * Returns input string modified in place (better have room!)
 */

char *
add_checksum (char *inbuf)
{
  int cksum = 0;
  char *p = inbuf;

  /* Sanity check.  */
  if (inbuf == NULL)
    return NULL;

  /* If the string doesn't start with a '$', it's broken.  */
  if (*p++ != '$')
    return inbuf;

  /* Now add up the cksum.  */
  while (*p)
    {
      /* If there's already a '#', it doesn't count toward the cksum.  
         Stop there.  */
      if (*p == '#')
	break;
      cksum += *p++;
    }

  /* Add a '#' at the end, even if it's already there, and
     overwrite any old checksum that may be there already.  */
  *p++ = '#';
  *p++ = int_to_hex ((cksum >> 4) & 0xf);
  *p++ = int_to_hex (cksum & 0xf);
  *p++ = '\0';

  /* Done.  */
  return inbuf;
}

/*
 * freeplay_show_next_commands
 *
 * Output the gdb commands contained in the current frame.
 */

static void
freeplay_show_next_commands (FILE *infile)
{
  char *line;

  if (cur_frame >= 0 && cur_frame <= last_cached_frame)
    {
      fseek (infile, stopframe[cur_frame].eventpos, SEEK_SET);
      while ((line = fgets (inbuf, sizeof (inbuf), infile)) != NULL)
	{
	  if (cur_frame + 1 <= last_cached_frame &&
	      ftell (infile) >= stopframe[cur_frame + 1].eventpos)
	    /* Done with current frame.  */
	    break;

	  if (line[0] == 'c' && line[1] == ' ')
	    fputs (line, stdout);
	}
    }
}

/*
 * handle_special_case
 *
 * Handle these requests locally, rather than through the replay buffer.
 *
 * Returns: a string reply for gdb.
 */

static char OK[8]    = "$OK#9a";
static char EMPTY[8] = "$#00";
static char STOP[8]  = "$S00#44";
static char E01[8]   = "$E01#a6";

static char *
handle_special_case (FILE *infile, int fd, char *request)
{
  unsigned long long addr;
  unsigned long len;
  int next_event_frame;
  char *p;

  static char *monitor_verbose_off = "$qRcmd,766572626f7365206f6666#13";
  static char *monitor_verbose_on  = "$qRcmd,766572626f7365206f6e#d6";
  static char *monitor_gdbreplay_next = 
    "$qRcmd,6764627265706c61792d6e657874#83";

  /* Handle 'k' (kill) request by exiting.  */
  if (strstr (request, "$k#6b") != NULL)
    {
      /* Well, to PROPERLY honor the 'kill' request, 
	 we need to actually shoot ourselves in the head...  */
      gdb_ack (fd);
      fprintf (stdout, "gdbfreeplay -- killed by gdb.\n");
      exit (0);
    }

  /* Handle 'D' (detach) request by exiting.  
     FIXME might want to stay alive and offer the socket again.  */
  if (strstr (request, "$D#44") != NULL)
    {
      /* OK, we're not yet set up to close and re-open the socket, 
	 and a new gdb does not seem able to re-attach, so for now
	 let's actually quit.  */
      gdb_ack (fd);
      gdbwriteline (fd, OK);
      fprintf (stdout, "gdbfreeplay -- gdb has detached.  Exiting.\n");
      exit (0);
    }

  /* Handle "monitor verbose on".  */
  if (strstr (request, monitor_verbose_on) != NULL)
    {
      verbose = 1;
      return OK;
    }

  /* Handle "monitor verbose off".  */
  if (strstr (request, monitor_verbose_off) != NULL)
    {
      verbose = 0;
      return OK;
    }

  /* Handle "monitor gdbreplay-next".  */
  if (strstr (request, monitor_gdbreplay_next) != NULL)
    {
      /* Show the next gdb commands from the gdbreplay log,
	 just like gdbreplay would.  */
      freeplay_show_next_commands (infile);
      return OK;
    }

  /* Handle 'R' (restart) request.
     This is an extended-remote request that is not really used any more,
     but we can send it out-of-band (using "maint packet") to effectively
     set the replay buffer back to the beginning.  */
  if (strstr (request, "$R#52") != NULL)
    {
      /* Reset replay buffer to beginning.  */
      /* NOTE: gdb doesn't know about target state changing, so
	 if you use this, you must accompany it with "flushregs".  */
      cur_frame = 0;
      return OK;
    }

  /* Handle 'S' (singlestep with a signal) like 's'.  */
  if (strstr (request, "$S") != NULL)
    {
      /* This is gdb trying to step the target, but with a signal.

	 Since in reality we can't have any influence on the execution
	 trace of the "target", we can just ignore the signal and
	 singlestep.

	 Whatever happened before, will happen again...  */

      if (verbose)
	fprintf (stdout, 
		 "handle_special_case: demoting 'S' to 's'.\n");
      goto step_label;
    }

  /* Handle 's' (step) by advancing the cur_frame index.  */
  if (strstr (request, "$s#73") != NULL)
    {
    step_label:
      if (cur_frame < last_cached_frame)
	cur_frame++;

      if (stopframe[cur_frame].eventpos != 0)
	{
	  return find_reply (infile, 
			     stopframe[cur_frame].eventpos);
	}
      else
	{
	  /* Not sure how this could even happen, but... */
	  return STOP;
	}
    }

  /* Handle 'bs' (reverse stepi) by decrementing the cur_frame index.  */
  if (strstr (request, "$bs#d5") != NULL)
    {
      if (cur_frame > 0)
	cur_frame--;

      if (stopframe[cur_frame].eventpos != 0)
	{
	  return find_reply (infile, 
			     stopframe[cur_frame].eventpos);
	}
      else
	{
	  /* Not sure how this could even happen, but... */
	  return STOP;
	}
    }

  /* Handle 'C' (continue with a signal) like 'c'.  */
  if (strstr (request, "$C") != NULL)
    {
      /* This is gdb trying to continue the target, but with a signal.

	 Since in reality we can't have any influence on the execution
	 trace of the "target", we can just ignore the signal and
	 continue.   

	 Whatever happened before, will happen again...  */

      if (verbose)
	fprintf (stdout, 
		 "handle_special_case: demoting 'C' to 'c'.\n");
      goto continue_label;
    }

  /* Handle 'c' (continue) by searching the cache for a stop event.  */
  if (strstr (request, "$c#63") != NULL)
    {
    continue_label:
      next_event_frame = freeplay_find_event (infile, fd, 
					      cur_frame, 
					      DIR_FORWARD,
					      PLAY_O_PACKETS);
      if (next_event_frame != -1)
	{
	  /* Got a stop event.  Make it the current frame, and tell gdb.
	   */
	  cur_frame = next_event_frame;
	}
      else
	{
	  cur_frame = last_cached_frame;
	}

      /* Find the original event message for this stop event.  */
      fseek (infile, stopframe[cur_frame].eventpos, SEEK_SET);
      fgets (inbuf, sizeof (inbuf), infile);

      /* If it's a "$T05" (SIGTRAP), give the target a chance to
	 re-compose it (possibly allowing for DECR_PC_AFTER_BREAK).  
      */
      if ((p = strstr (inbuf, "$T05")) != NULL)
	return add_checksum (target_compose_T_packet (p,
						      stopframe[cur_frame].pc,
						      next_event_frame == -1 ?
						      0 :
						      1 /* breakpoint_p */));
      /* Otherwise, just return it.  */
      else
	return &inbuf[0];
    }

  /* Handle 'bc' (revese continue) by searching the cache for a stop event.  */
  if (strstr (request, "$bc#c5") != NULL)
    {
      next_event_frame = freeplay_find_event (infile, fd, 
					      cur_frame, 
					      DIR_BACKWARD,
					      PLAY_O_PACKETS);
      if (next_event_frame != -1)
	{
	  /* Got a stop event.  Make it the current frame, and tell gdb.
	   */
	  cur_frame = next_event_frame;
	}
      else
	{
	  /* WTF? */
	  gdb_ack (fd);
	  strcpy (inbuf, "$O5768617420746865206675636b3f");
	  if (verbose)
	    fprintf (stdout, "WTF? %s\n", add_checksum (inbuf));
	  gdbwriteline (fd, add_checksum (inbuf));
	  cur_frame = 0;
	}

      /* Find the original event message for this stop event.  */
      fseek (infile, stopframe[cur_frame].eventpos, SEEK_SET);
      fgets (inbuf, sizeof (inbuf), infile);

      /* If it's a "$T05" (SIGTRAP, give the target a chance to
	  re-compose it (possibly allowing for DECR_PC_AFTER_BREAK).  
      */
      if ((p = strstr (inbuf, "$T05")) != NULL)
	return add_checksum (target_compose_T_packet (p,
						      stopframe[cur_frame].pc,
						      next_event_frame == -1 ?
						      0 :
						      1 /* breakpoint_p */));
      /* If it's a "$S", just return it (FIXME?)  */
      else
	return &inbuf[0];
    }

  /* Handle Z0 set breakpoint.  */
  if ((p = strstr (request, "$Z0")) != NULL)
    {
      if (p[3] == ',')
	{
	  addr = strtoull (p + 4, &p, 16);
	  if (p[0] == ',')
	    {
	      len = strtoul (p + 1, NULL, 16);
	      remote_set_breakpoint (SOFTWARE_BP, addr, len);
	      return OK;
	    }
	}
    }

  /* Handle z0 remove breakpoint.  */
  if ((p = strstr (request, "$z0")) != NULL)
    {
      if (p[3] == ',')
	{
	  addr = strtoull (p + 4, &p, 16);
	  if (p[0] == ',')
	    {
	      len = strtoul (p + 1, NULL, 16);
	      remote_remove_breakpoint (SOFTWARE_BP, addr, len);
	      return OK;
	    }
	}
    }
#if 0
  /* 
     We can actually ignore QPassSignals, because if the original
     target that made the recording handled it, it will be transparent 
     to us, and if not, it will still be transparent.  It's not 
     important enough for us to want to handle locally.  */

  /* Handle QPassSignals.
     FIXME we should implement this, but for the meantime, 
     don't let gdb think we're supporting it if we're actually not.  */
  if (strstr (request, "$QPassSignals") != NULL)
    {
      if (verbose)
	fprintf (stdout, "handle_special_case: punting QPassSignals.\n");
      return EMPTY;
    }
#endif
  /* Handle "vCont" by saying we can't do it.

     FIXME we could do it, mimicing 's' and 'c' etc., but 
     until such time we must intercept it here, lest we should
     let it be handled by something in the replay buffer.

     That would be bad...   */

  if (strstr (request, "$vCont") != 0)
    return EMPTY;

  /* TODO: tfind, QPassSignals...  */

  /* Let the replay buffer handle it.  */
  return NULL;
}

/*
 * fallbacks
 *
 * Attempt to handle requests that were not handled otherwise.
 * Returns: char * or NULL.
 */

static char *
fallbacks (FILE *infile, int fd, char *request)
{
  char *p;

  /* Handle "Hc0" request.  */
  if (strstr (request, "$Hc0#db") != NULL)
    {
      /* Debugger just wants to set the "continue thread" to zero.
	 Don't know why this isn't in the replay cache, but it's
	 harmless, just say OK.  */
      if (verbose)
	fprintf (stdout, "fallbacks: absorbing 'Hc0'\n");
      return OK;
    }
  /* Handle un-cached memory request (if not handled upstream).  */
  if (strstr (request, "$m") != NULL)
    {
      /* FIXME this need not happen so often, 
	 once we do a better job of simulating memory.  */
      if (verbose)
	fprintf (stdout, "fallbacks: failing memory request '%s'.\n",
		 request);
      return E01;
    }
  /* Handle P/p requests (if they weren't handled upstream).  */
  if (strstr (request, "$p") != NULL ||
      strstr (request, "$p") != NULL)
    {
      if (verbose)
	fprintf (stdout, "fallbacks: absorbing P/p request.\n");
      return EMPTY;	/* Tell gdb we don't know that one.  */
    }

  /* Handle 'G' request (if not handled upstream).
     Just tell gdb "OK", and otherwise ignore it.
     The debugger now has its own idea of what the registers are...  */
  if (strstr (request, "$G") != NULL)
    {
      if (verbose)
	fprintf (stdout, "fallbacks: absorbing G request.\n");
      return OK;
    }

  /* Handle 'M' or 'X' request (if not handled upstream).
     There are two ways to go here -- just say "OK", without
     actually doing anything, or return an error.

     Going to try just saying "OK", for now...  */
  if (strstr (request, "$M") != NULL ||
      strstr (request, "$X") != NULL)
    {
      if (verbose)
	fprintf (stdout, "fallbacks: absorbing memory write request.\n");
      return OK;
    }

  /* Handle 'g' request (if not handled upstream).  
     This is usually at a singlestep event.  
     We need to construct a 'g' packet for gdb from the 'T' packet.  */
  if (strstr (request, "$g#67") != NULL)
    {
      /* Find the original event message for this stop event.  */
      fseek (infile, stopframe[cur_frame].eventpos, SEEK_SET);
      fgets (inbuf, sizeof (inbuf), infile);
      /* If it's a "$T", give the target a chance to compose  a g packet.
	 (possibly allowing for DECR_PC_AFTER_BREAK).  */
      if ((p = strstr (inbuf, "$T")) != NULL)
	{
	  if (verbose)
	    fprintf (stdout, "fallbacks: constructing 'g' packet.\n");
	  return add_checksum (target_compose_g_packet (p));
	}
      /* If it's an 'S' packet, there ain't much we can do
	 (FIXME unles we at least know the PC?  */
      else
	{
	  if (verbose)
	    fprintf (stdout, "fallbacks: punting on 'g' packet request.\n");
	  return EMPTY;
	}
    }

  /* Any unhandled qRcmd, just echo it to stdout.  */
  if ((p = strstr (request, "$qRcmd,")) != NULL)
    {
      if (verbose)
	fprintf (stdout, "fallbacks: ignoring %s\n", p);
      return EMPTY;
    }

  /* Default for any other un-handled request -- return empty string.  */
  if (verbose)
    fprintf (stdout, "fallbacks: absorbing unknown request '%s'.\n",
	     request);
  return EMPTY;
}

/*
 * gdbfreeplay
 *
 * This is the function that manages the interaction with gdb.
 */

void
gdbfreeplay (int fd)
{
  char *request;
  char *reply;

  /* Process requests from gdb.  */
  while (1)
    {
      /* Read next request from gdb.  */
      request = gdbreadline (fd);
      if (verbose)
	fprintf (stdout, "gdb request: %s\n", request);

      /* FIXME -- this is where we should handle special cases, including:
	 -- vCont
	 -- tfind
      */

      reply = handle_special_case (replay_file, fd, request);

      if (reply == NULL)
	{
	  /* Now see if we have a matching request in the current frame.  */
	  reply = find_reply (replay_file, 
			      frame_find_request (replay_file, request));
	}

      if (reply == NULL)
	{
	  /* Found no matching request in the current frame.
	     Do fall-backs and last resorts.  */
	  reply = fallbacks (replay_file, fd, request);
	}

      if (verbose)
	fprintf (stdout, "freeplay reply: %s\n", 
		 reply == NULL ? "<not found>" : reply);

      if (reply)
	{
	  gdb_ack (fd);
	  gdbwriteline (fd, reply);
	}
      else
	{
	  /* FIXME -- gotta say something back... */
	}
    }
}