| 2001-05-30 Daniel Berlin <dan@cgsoftware.com> |
| |
| * coffread.c (patch_opaque_types): Use BLOCK_NBUCKETS, |
| BLOCK_BUCKETS, handle the fact that we now have symbol chains. |
| |
| 2001-05-29 Daniel Berlin <dan@cgsoftware.com> |
| |
| * bcache.c (hash): Fix indenting, make it FNV-1 hash rather than |
| FNV-0 hash (just a change in the starting constant). |
| |
| * minsyms.c (msymbol_hash_iw): Rewrite, based on FNV-1 hash from |
| bcache.c. Don't modulo the hash by the table size here, so we can |
| reuse this function elsewhere. |
| Add comments about changing the loop this function uses, and how |
| symbol lookup is dominated by this function now. |
| (msymbol_hash): Just use FNV-1 hash from bcache.c. Also don't |
| modulo the hash by the table size here, so we can reuse this |
| function. |
| (add_minsym_to_hash_table): Modulo the msymbol_hash return value |
| by the hash table size. |
| (add_minsym_to_demangled_hash_table): Ditto for msymbol_hash_iw. |
| (lookup_minimal_symbol): Ditto for both. |
| |
| * symtab.c (lookup_block_symbol): Complete rewrite. |
| (search_symbols): Use BLOCK_NBUCKETS, BLOCK_BUCKET, and walk the |
| chain, since it's trying to go through all the symbols in blocks |
| we know to be in hash table form. |
| (make_symbol_completion_list): Ditto. |
| (make_symbol_overload_list): Ditto. |
| |
| * buildsym.c (finish_block): Use the syms array in the block as a |
| hash table if possible (IE, the block isn't a function). Default |
| number of buckets is 1/4 the number of symbols. |
| |
| * symtab.h: (BLOCK_BUCKET): New macro. Currently the same as |
| BLOCK_SYM, since we reuse the sym array as the hash table. |
| (BLOCK_NBUCKETS): New macro. Currently the same as BLOCK_NSYMS, |
| for the same reason. |
| (BLOCK_SHOULD_SHORT): Never sort, not necessary anymore. |
| (struct symbol): Add hash_next member. |
| |
| |
| 2001-05-29 Daniel Berlin <dan@cgsoftware.co> |
| |
| * Makefile.in (SFILES): Add symeval.c. |
| (symeval_h): New. |
| (COMMON_OBS): Add symeval.o |
| (symeval.o): New. |
| (findvar.o): Depend on $(symeval_h), too. |
| |
| * symtab.h: Add LOC_LOC_EXPR and LOC_LOC_LIST to the location types. |
| Add dynamic_location and loc/frameloc to the symbol structure. |
| (SYMBOL_LOC_EXPR): New macro. |
| (SYMBOL_FRAME_LOC_EXPR): Ditto. |
| Add forward declaration of locexpr struct. |
| |
| * symeval.c: New file. |
| |
| * symeval.def: New file. |
| |
| * symeval.h: New file. |
| |
| |
| 2001-05-27 Daniel Berlin <dan@cgsoftware.com> |
| |
| * symfile.c (default_symfile_offsets): Allocate in misc_obstack. |
| (reread_symbols): Handle misc_obstack too, and use it where |
| psymbol_obstack didn't belong. |
| (allocate_psymtab): Ditto. |
| |
| * objfiles.c (add_to_objfile_sections): Use misc_obstack, not psymbol_obstack. |
| (build_objfile_section_table): Ditto. |
| (free_objfile): Free the misc_obstack. |
| (allocate_objfile): Setup misc_obstack too. |
| |
| * objfiles.h: Add misc_obstack to object file. |
| |
| 2001-05-22 Daniel Berlin <dan@cgsoftware.com> |
| |
| * linespec.c (find_toplevel_char): '<' and '>' also increase and |
| decrease the depth we are at, in the case of templates. |
| |
| 2001-07-06 Jim Blandy <jimb@redhat.com> |
| |
| * gdbtypes.h (builtin_type_void_func_ptr): New builtin type. |
| * gdbtypes.c (builtin_type_void_func_ptr): Define the variable. |
| (build_gdbtypes): Initialize it. |
| (_initialize_gdbtypes): Swap it. |
| |
| 2001-07-04 Daniel Jacobowitz <drow@mvista.com> |
| |
| * mips-tdep.c (mips32_op): Correct offset. |
| (itype_op): Likewise. |
| (itype_rs): Fix formatting. |
| (itype_immediate): Fix formatting. |
| (jtype_op): Correct offset. |
| (jtype_target): Fix formatting. |
| (rtype_op): Correct offset. |
| (rtype_rs): Fix formatting. |
| (rtype_rt): Likewise. |
| (rtype_rd): Likewise. |
| (rtype_shamt): Likewise. |
| (rtype_funct): Likewise. |
| |
| (mips32_next_pc): Fix formatting and comments. Recognize |
| coprocessor 1 branches. Check the correct field for BLT family |
| branches. Use itype_rt instead of itype_rs for the second register |
| of a BNE or BNEL branch. Move (unreachable) default case. |
| |
| 2001-07-04 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.h (struct ui_out_impl): Add field is_mi_like_p. |
| (ui_out_is_mi_like_p): Declare. |
| * ui-out.c (ui_out_is_mi_like_p): Define. |
| (default_ui_out_impl): Initialize is_mi_like_p to zero. |
| * cli-out.c (cli_ui_out_impl): Ditto. |
| * breakpoint.c (print_it_typical): Use ui_out_is_mi_like_p. |
| (watchpoint_check, print_one_breakpoint, mention): Ditto. |
| * infrun.c (print_stop_reason, normal_stop): Ditto. |
| |
| 2001-07-05 Daniel Jacobowitz <drow@mvista.com> |
| |
| * mips-tdep.c (mips_software_single_step): New function. |
| * config/mips/tm-mips.h: Add prototype for |
| mips_software_single_step. |
| |
| 2001-07-05 Daniel Jacobowitz <drow@mvista.com> |
| |
| * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead |
| of greg_t. |
| (fill_gregset): Likewise. |
| |
| 2001-07-05 Andrew Cagney <ac131313@redhat.com> |
| |
| * objfiles.c (open_mapped_file): Use lbasename instead of |
| basename. |
| |
| 2001-07-05 Jim Blandy <jimb@redhat.com> |
| |
| * d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs, |
| show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp, |
| d10v_write_sp, d10v_write_fp, d10v_read_fp, |
| d10v_push_return_address): Call the functions d10v_make_daddr, |
| d10v_make_iaddr, d10v_convert_iaddr_to_raw, and |
| d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR, |
| D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and |
| D10V_CONVERT_DADDR_TO_RAW. |
| |
| * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix. |
| |
| 2001-07-05 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/i386/xm-go32.h (HOST_I386): Removed. |
| * config/i386/xm-linux.h (HOST_I386): Removed. |
| |
| 2001-07-04 Mark Kettenis <kettenis@gnu.org> |
| |
| * i387-tdep.c (print_i387_value): Add extra space after final full |
| stop in comment. |
| |
| 2001-07-04 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (5.1): Update. Doco changes committed. |
| |
| 2001-06-29 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/arm/tm-arm.h: Include "floatformat.h". |
| |
| 2001-06-29 Andrew Cagney <ac131313@redhat.com> |
| |
| * i387-tdep.c: Include "gdb_assert.h". |
| (print_i387_value): Use extract_floating to extract the FP value |
| from a zero padded local buffer. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO: Delete all thread items. The thread code was overhauled. |
| |
| 2001-07-04 Elena Zannoni <ezannoni@redhat.com> |
| |
| * memattr.c (create_mem_region): Move n to next memory region, |
| to avoid infinite loop. |
| |
| * memattr.h: Add copyright statement. |
| * memattr.c: Ditto. |
| |
| 2001-07-04 Jim Blandy <jimb@redhat.com> |
| |
| * dwarf2read.c (struct partial_die_info): New member: has_pc_info. |
| (read_partial_die): Delete fourth argument; we return this info in |
| the struct partial_die_info object itself now. |
| (dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the |
| has_pc_info field of the partial die struct, rather than passing a |
| variable by reference to read_partial_die. |
| |
| * dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous |
| code in loop condition. |
| |
| 2001-07-03 Michael Snyder <msnyder@redhat.com> |
| |
| * thread_db (find_new_threads_callback, thread_db_thread_alive, |
| attach_thread): Update comments. |
| |
| 2001-06-29 Ken Whaley <ken@believe.com> |
| |
| * thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition |
| to TD_THR_UNKNOWN when looking for defunct zombie threads. |
| (thread_db_thread_alive): Ditto. |
| (find_new_threads_callback): Ditto. |
| |
| 2001-07-02 Daniel Jacobowitz <drow@mvista.com> |
| |
| * MAINTAINERS: Add myself to the write-after-approval list. |
| |
| 2001-07-02 Daniel Jacobowitz <drow@mvista.com> |
| |
| * solib-svr4.c: Include "elf/mips.h". |
| (elf_locate_base): Make DT_MIPS_RLD_MAP block unconditional. |
| |
| 2001-07-02 Jim Blandy <jimb@redhat.com> |
| |
| * dwarf2read.c (read_comp_unit, sibling_die, dump_die, |
| dump_die_list, store_in_ref_table, follow_die_ref): Make these |
| static; they're private functions. |
| |
| 2001-07-01 Mark Elbrecht <snowball@bigfoot.com> |
| |
| * coffread.c (coff_symfile_read): Parse DWARF2 info if present. |
| |
| 2001-06-28 Elena Zannoni <ezannoni@redhat.com> |
| |
| * TODO: Add import of readline 4.2 as a gdb 5.2 task. |
| |
| 2001-06-29 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/djgpp/fnchange.lst: Sort. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/djgpp/fnchange.lst: Rename mi0-var-block.exp, |
| mi0-var-cmd.exp, mi0-var-child.exp and mi0-var-display.exp. |
| |
| 2001-06-29 Andreas Jaeger <aj@suse.de> |
| |
| * MAINTAINERS: Add myself to the write-after-approval list. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * remote-array.c (SWAP_TARGET_AND_HOST): Delete macro. |
| (get_hex_word): Don't use HOST_BYTE_ORDER. |
| (array_fetch_registers): Add variable ``reg''. Use |
| store_unsigned_integer to byte-swap the register. Delete unused |
| local ``regs''. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Add Per Bothner to Java maintainers. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default. |
| * rdi-share/hostchan.h (__unix): Hack, provide a default value. |
| * rdi-share/host.h (__unix): Hack, define when __NetBSD__. |
| * TODO: Update. |
| * MAINTAINERS: Update. arm-elf builds. |
| |
| 2001-06-28 Jim Blandy <jimb@redhat.com> |
| |
| * d10v-tdep.c (d10v_ts2_dmap_register): Doc fix. |
| |
| * d10v-tdep.c (d10v_frame_chain_valid, d10v_use_struct_convention, |
| d10v_breakpoint_from_pc, d10v_register_byte, |
| d10v_register_raw_size, d10v_register_virtual_size, |
| d10v_register_virtual_type, d10v_register_convertible, |
| d10v_register_convert_to_virtual, d10v_register_convert_to_raw, |
| d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p, |
| d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw, |
| d10v_store_struct_return, d10v_store_return_value, |
| d10v_extract_struct_value_address, d10v_frame_saved_pc, |
| d10v_saved_pc_after_call, d10v_pop_frame, d10v_skip_prologue, |
| d10v_frame_chain, d10v_frame_init_saved_regs, |
| d10v_init_extra_frame_info, d10v_read_pc, d10v_write_pc, |
| d10v_read_sp, d10v_write_sp, d10v_write_fp, d10v_read_fp, |
| d10v_push_return_address, d10v_push_arguments, |
| d10v_extract_return_value): Make these functions static. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| From Fernando Nasser: |
| * infrun.c (handle_inferior_event): Handle "nexti" inside function |
| prologues. |
| |
| 2001-06-28 Michael Snyder <msnyder@redhat.com> |
| |
| * infrun.c (handle_inferior_event): Replace prev_pc test in all |
| calls to bpstat_stop_status (removed in 1999-09-24). This test |
| helps distinguish stepping over a breakpoint trap from stepping |
| thru a jump to the instruction after a breakpoint trap. |
| (handle_inferior_event): Don't bother writing the PC if |
| DECR_PC_AFTER_BREAK is zero (optimization). |
| * breakpoint.c (bpstat_stop_status): Add comment explaining the |
| purpose and usage of the "not_a_breakpoint" argument in computing |
| the breakpoint address. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2000-12-03 Stephane Carrez <Stephane.Carrez@worldnet.fr>: |
| * monitor.c (setmem_resp_delim_pattern): New regexp pattern. |
| (setreg_resp_delim_pattern): Likewise. |
| (setmem_resp_delim_fastmap): New buffer. |
| (setreg_resp_delim_fastmap): Likewise. |
| (monitor_open): Initialize above regexp if they are defined. |
| (monitor_write_memory): Use regexp to check the result of write. |
| (monitor_store_register): Likewise to check result of register set. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2000-06-14 John Marshall <john_w_marshall@palm.com>: |
| * coff-solib.c: Include symfile.h and objfiles.h to make |
| OBJF_SHARED visible. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.in (--enable-gdbmi): Enable by default. |
| * configure: Regenerate. |
| * TODO: Update. |
| * NEWS: Update |
| |
| 2001-06-28 Joel Brobecker <brobecker@act-europe.fr> |
| |
| * solib-osf.c (osf_in_dynsym_resolve_code): Add a comment |
| explaining the consequences of always returning zero. No code |
| change. |
| |
| 2001-06-28 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2001-06-08 Daniel Jacobowitz <djacobowitz@mvista.com>: |
| * defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65 |
| to TARGET_SIGNAL_REALTIME_127. |
| * target.c (struct signals): Add SIG63 to SIG127. |
| (target_signal_from_host): Handle up to 127 signals. |
| (do_target_signal_to_host): Likewise. |
| |
| 2001-06-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * remote-sds.c (sds_start_remote): Change type of ``c'' to int |
| from possibly unsigned char. |
| |
| 2001-06-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * ser-ocd.c: Delete file. |
| * Makefile.in (ALLDEPFILES): Remove ser-ocd.c |
| (ser-ocd.o): Delete target. |
| * TODO: Update. |
| * NEWS: Update. |
| |
| 2001-06-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS (Write After Approval): Sort. |
| (Past Maintainers): Daniel Berlin stepped down as C++ maintainer. |
| |
| 2001-06-26 Andrew Cagney <ac131313@redhat.com> |
| |
| * breakpoint.c (breakpoint_1): Always output the breakpoint |
| headings. Leave it to ui-out to decide which |
| |
| 2001-06-25 Andrew Cagney <ac131313@redhat.com> |
| |
| * stack.c (print_frame): For ui_out, output a list of arguments. |
| |
| 2001-06-25 Kevin Buettner <kevinb@redhat.com> |
| |
| * MAINTAINERS (paper trail): Update. |
| |
| 2001-06-25 Michael Snyder <msnyder@redhat.com> |
| |
| * infrun.c: Eliminate the "thread_step_needed" state variable, |
| and replace it with a relatively simple test in resume. |
| (resume): Replace thread_step_needed logic with a test for |
| stepping, breakpoint_here_p and breakpoints_inserted. |
| Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic. |
| (proceed): Discard thread_step_needed logic. |
| (wait_for_inferior, fetch_inferior_event, handle_inferior_event): |
| Discard thread_step_needed logic. |
| |
| 2001-06-24 Fernando Nasser <fnasser@redhat.com> |
| |
| * remote-rdi.c (arm_rdi_wait): Fix return type in prototype. |
| * rdi-share/host.h: Add missing parenthesis in conditional. |
| |
| 2001-06-22 J.T. Conklin <jtc@redback.com> |
| |
| * configure.in: include nlist.h when checking for member som_addr |
| in struct so_map. |
| * configure: regenerate. |
| |
| 2001-06-21 Keith Seitz <keiths@redhat.com> |
| |
| * cli-out.c (cli_out_new): Initialize new structure member |
| "suppress_output". |
| |
| 2001-06-20 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.h (ui_out_table_header): Add parameter ``col_name''. |
| (table_header_ftype): Ditto. |
| * cli-out.c (cli_table_header): Update. |
| * ui-out.c (ui_out_table_header): Update. |
| (uo_table_header): Update. |
| (default_table_header): Update. |
| (append_header_to_list): Update. |
| (struct ui_out_header): Add field ``col_name''. |
| (append_header_to_list): Use xstrdup. Initialize col_name. |
| * breakpoint.c (breakpoint_1): Pass COL_NAME to |
| ui_out_table_header. |
| |
| 2001-06-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * cli-out.c: Include "gdb_assert.h'. |
| (struct ui_out_data): Add field ``suppress_output. |
| (cli_table_begin): When NR_ROWS is zero, suppress_output. |
| (cli_table_end): Clear suppress_output. |
| (cli_table_body): Check suppress_output. |
| (cli_table_header, cli_begin): Ditto. |
| (cli_end, cli_field_int, cli_field_skip): Ditto. |
| (cli_field_string, cli_field_fmt, cli_spaces): Ditto. |
| (cli_text, cli_message, cli_wrap_hint): Ditto. |
| * breakpoint.c (breakpoint_1): Close the ui_out table before |
| printing the breakpoint not found message. |
| |
| 2001-06-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.c (ui_out_table_begin): Add parameter ``nr_rows''. |
| (default_table_begin): Ditto. |
| (uo_table_begin): Ditto. |
| * cli-out.c (cli_table_begin): Ditto. |
| * ui-out.h (ui_out_table_begin): Update |
| (table_begin_ftype): Update. |
| * breakpoint.c (breakpoint_1): Pass nr_printable_breakpoints to |
| ui_out_table_begin. |
| |
| 2001-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * breakpoint.c (breakpoint_1): Restructure. Compute the |
| nr_printable_breakpoints. Move the header output to before the |
| main print breakpoints loop. |
| (user_settable_breakpoint): New function. |
| |
| 2001-06-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * infrun.c, breakpoint.c: Use strncmp as the "mi" test. Allow, |
| "mi", "mi0" and "mi1". |
| |
| 2001-06-17 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh: Generate an error when conflicting macro |
| definitions. Generate an error when both pure multi-arch and |
| "tm.h". |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * defs.h (GDB_MULTI_ARCH_TM): Rewrite definition. |
| |
| 2001-06-17 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/sparc/tm-sun4sol2.h (GDB_MULTI_ARCH): Down grade to |
| GDB_MULTI_ARCH_PARTIAL from two. |
| |
| 2001-06-17 Fernando Nasser <fnasser@redhat.com> |
| |
| From 2001-06-15 Eirik Fuller <eirik@hackrat.com> |
| * cli/cli-script.c (free_command_lines): Reset list pointer. |
| |
| 2001-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * arch-utils.c (init_frame_pc_default): New function |
| * arch-utils.h (init_frame_pc_default): Declare. |
| * gdbarch.sh (INIT_FRAME_PC): Default to init_frame_pc_default and |
| not init_frame_pc_noop. |
| * gdbarch.h, gdbarch.c: Re-generate. |
| * blockframe.c (INIT_FRAME_PC): Delete macro definition. |
| * mips-tdep.c (mips_gdbarch_init): Set init_frame_pc to |
| init_frame_pc_noop. |
| |
| 2001-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.c: Regenerate. Out-of-sync with gdbarch.sh. |
| |
| 2001-06-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh (CANNOT_FETCH_REGISTER): Multi-arch. |
| (CANNOT_STORE_REGISTER): Ditto. |
| * infptrace.c (CANNOT_FETCH_REGISTER): Delete definition. |
| (CANNOT_STORE_REGISTER): Ditto. |
| * regcache.c (CANNOT_STORE_REGISTER): Ditto. |
| * lynx-nat.c (CANNOT_STORE_REGISTER): Ditto. |
| * arch-utils.h (cannot_register_not): Define. |
| * arch-utils.c (cannot_register_not): Declare. |
| |
| 2001-06-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh: Clarify pre/post default |
| (INIT_FRAME_PC_FIRST, INIT_FRAME_PC): Multiarch. |
| * blockframe.c (get_prev_frame): Remove #ifdef from around |
| INIT_FRAME_PC_FIRST call. |
| * arch-utils.c (init_frame_pc_noop): Define. |
| * arch-utils.h (init_frame_pc_noop): Declare. |
| * config/mips/tm-mips.h (INIT_FRAME_PC_FIRST): Delete. |
| (INIT_FRAME_PC, mips_init_frame_pc_first): Ditto. |
| * mips-tdep.c (mips_init_frame_pc_first): Make static. |
| (mips_gdbarch_init): Initialize init_frame_pc_first. |
| (mips_dump_tdep): Update. |
| |
| 2001-06-15 Michael Snyder <msnyder@redhat.com> |
| |
| * infrun.c (context_switch): New function. Abstract the operation |
| of saving and restoring infrun's state when switching threads. |
| (handle_inferior_event): Normalize the handling of the 'thread hop' |
| event (when the wrong thread hits a thread-specific breakpoint, |
| and we need to solo-step that thread past the breakpoint). |
| Call keep_going, instead of target_resume. Handle the subsequent |
| singlestep-trap as a normal event instead of just resuming. |
| |
| 2001-06-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * arch-utils.c (core_addr_identity): New function. Rename |
| default_convert_from_func_ptr_addr. |
| * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Update. |
| (ADDR_BITS_REMOVE): Define. Default to core_addr_identity. |
| * defs.h (ADDR_BITS_REMOVE): Delete macro definition. |
| * config/mips/tm-mips.h (ADDR_BITS_REMOVE): Delete definition. |
| * mips-tdep.c (mips_addr_bits_remove): Make static. |
| (mips_gdbarch_init): Initialize addr_bits_remove. |
| |
| 2001-06-15 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2001-02-26 D.J. Barrow <djbarrow@de.ibm.com>: |
| * configure.tgt: Add S/390 31 & 64 bit target configuration. |
| * configure.host: Ditto for host. |
| |
| 2001-06-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh (EXTRACT_STRUCT_VALUE_ADDRESS_P): Delete definition. |
| (EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with |
| predicate. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * values.c (value_being_returned): Change the reference to |
| EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call. |
| |
| 2001-06-15 Joel Brobecker <brobecker@act-europe.fr> |
| |
| * MAINTAINERS: Add Paul Hilfinger and Joel Brobecker to the |
| Write After Approval list. |
| |
| 2001-06-14 Michael Snyder <msnyder@redhat.com> |
| |
| * remote.c (show_remote_protocol_qSymbol_packet_cmd, |
| set_remote_protocol_qSymbol_packet_cmd): New functions. |
| (init_all_packet_configs, show_remote_cmd): Add qSymbol packet. |
| (remote_check_symbols): New function. Implement qSymbol packet, |
| allowing target to request symbol lookup service from gdb. |
| (remote_open_1, remote_async_open_1): Call remote_check_symbols, |
| allowing symbol lookup from exec_bfd on connection to target. |
| (remote_new_objfile): New function. Catch new objfile notifications |
| from shared library module, and call remote_check_symbols. |
| (_initialize_remote): Hook remote_new_objfile into the shared |
| library notification chain. Add "set remote symbol-lookup" command. |
| |
| 2001-06-14 Keith Seitz <keiths@redhat.com> |
| |
| * tracepoint.c (trace_command): We now have tracepoint |
| events. Get rid of those ugly hooks. |
| (tracepoint_operation): Likewise. |
| (trace_pass_command): Likewise. |
| |
| 2001-06-13 Michael Snyder <msnyder@redhat.com> |
| |
| * gdbthread.h (struct thread_info): Add new fields: |
| current_line, current_symtab, step_sp, for saved infrun state. |
| * thread.c (save_infrun_state, load_infrun_state): Save and |
| restore current_line, current_symtab, and step_sp. |
| (add_thread): Rather than adding assignments to initialize |
| the new fields, just use memset (tp, 0, sizeof (*tp). |
| This way future new fields will not be overlooked. |
| * infrun.c (handle_inferior_event): Save and restore save_sp, |
| current_line, and current_symtab when switching threads. |
| |
| 2001-06-13 Elena Zannoni <ezannoni@redhat.com> |
| |
| * MAINTAINERS: Add Andrew Cagney as co-maintainer of |
| testsuite/gdb.mi. |
| |
| 2001-06-11 Andrew Cagney <ac131313@redhat.com> |
| |
| * symtab.c (lookup_symtab_1): Replace basename with lbasename. |
| (lookup_partial_symtab, file_matches): Ditto. |
| (make_source_files_completion_list): Ditto. |
| (make_file_symbol_completion_list): Ditto. Make local char* |
| variable ``tail'' constant. |
| (make_source_files_completion_list): Ditto with ``base_name''. |
| * source.c (open_source_file): Use lbasename. Make ``p'' const |
| char *. |
| |
| 2001-06-13 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * config/i386/xm-go32.h (SLASH_P, ROOTED_P, SLASH_CHAR) |
| (SLASH_STRING): Remove unised definitions. |
| * config/i386/xm-cygwin.h: Likewise. |
| |
| 2001-06-12 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.c (ui_out_list_begin): Add parameter ``id''. |
| (make_cleanup_ui_out_list_begin_end): Ditto. Open the list. |
| * ui-out.h: Update declarations. |
| |
| Mon Jun 11 17:26:43 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * source.c (openp): Make parameters ``path'' and ``string'' |
| constant. |
| (openp): Use alloca to safely duplicate ``string''. Make local |
| variables ``p'' and ``p1'' constant. Delete char* casts. |
| * defs.h: Update. |
| |
| * symtab.c (lookup_symtab_1): Make parameter ``name'' constant. |
| (lookup_symtab, lookup_partial_symtab): Ditto. |
| * symtab.h (lookup_symtab, lookup_partial_symtab): Update. |
| |
| 2001-06-11 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.h (ui_out_table_begin): Make char* parameters constant. |
| (ui_out_table_header, ui_out_field_int): Ditto. |
| (ui_out_field_core_addr, ui_out_field_string): Ditto. |
| (ui_out_field_stream, ui_out_field_fmt): Ditto. |
| (ui_out_field_skip, ui_out_text, ui_out_message): Ditto. |
| * ui-out.c (ui_out_table_begin, ui_out_table_header): Update. |
| (ui_out_field_core_addr, ui_out_field_stream): Update. |
| (ui_out_field_string, ui_out_field_fmt): Update. |
| (ui_out_text, ui_out_message): Update. |
| (append_header_to_list): Make char* parameters constant. |
| (uo_table_header, uo_table_begin): Ditto. |
| (uo_field_int, uo_field_skip): Ditto. |
| (uo_field_string, uo_field_fmt): Ditto. |
| (uo_text, uo_message): Ditto. |
| |
| 2001-06-11 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * completer.c (gdb_completer_loc_break_characters): New variable. |
| (line_completion_function): If we are completing on locations, |
| back up the start of word pointer past all characters which can |
| appear in a location spec. |
| (location_completer): New function. |
| |
| * completer.h: Add prototype for location_completer. |
| |
| * symtab.c (make_source_files_completion_list) |
| (add_filename_to_list, not_interesting_fname): New functions. |
| (filename_seen): New function, body extracted from |
| output_source_filename. |
| (output_source_filename): Call filename_seen to check if the file |
| was already printed. |
| (make_symbol_completion_list): If TEXT includes a |
| double-quoted string, return an empty list, not NULL. |
| (make_file_symbol_completion_list): New function, similar to |
| make_symbol_completion_list but with an additional argument |
| SRCFILE. |
| |
| * symtab.h (make_file_symbol_completion_list) |
| (make_source_files_completion_list): Add prototypes. |
| |
| * breakpoint.c (_initialize_breakpoint): Make location_completer |
| be the completion function for all commands which set breakpoints |
| and watchpoints. |
| (top-level): #include "completer.h". |
| |
| * tracepoint.c (_initialize_tracepoint): Make location_completer |
| be the completion function for the "trace" command. |
| (top-level): #include "completer.h". |
| |
| * printcmd.c (_initialize_printcmd): Make location_completer be |
| the completion function for the "print", "inspect", "call", and |
| "disassemble" commands. |
| (top-level): #include "completer.h". |
| |
| * infcmd.c (_initialize_infcmd): Make location_completer be the |
| completion function for the "go", "jump", and "until" commands. |
| (top-level): #include "completer.h". |
| |
| 2001-06-10 Christopher Faylor <cgf@redhat.com> |
| |
| * gnu-regex.c: Eliminate obsolete check for _MSC_VER. |
| * utils.c (notice_quit): Remove dummy function only used for _MSC_VER. |
| * values.c (unpack_double): Remove obsolete check for _MSC_VER. |
| * defs.h: Ditto. |
| * m32r-rom.c: Ditto. |
| * p-exp.y: Ditto. |
| * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for |
| faster compilation. |
| (get_ds_base): Remove _MSC_VER version of this function. |
| * nindy-share/ttyflush.c: Ditto. |
| * rdi-share/host.h: Ditto. |
| * ser-go32.c (dos_readchar): Remove call to obsolete function. |
| * remote-sim.c (gdb_os_poll_quit): Ditto. |
| * remote-e7000.c (expect): Remove obsolete #if 0'ed code. |
| |
| * main.c (captured_main): Eliminate special Cygwin checks. |
| * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include. |
| |
| 2001-06-09 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (gdbcmd_h): Add ui_out_h. |
| (breakpoint.o, infcmd.o, main.o, printcmd.o, stack.o): Ditto. |
| (thread.o, top.o): Ditto. |
| |
| * ui-out.h (table_begin_ftype): Make string parameters constant. |
| (table_header_ftype): Ditto. |
| (field_int_ftype): Ditto. |
| (field_skip_ftype): Ditto. |
| (field_string_ftype): Ditto. |
| (field_fmt_ftype): Ditto. |
| (text_ftype): Ditto. |
| (message_ftype): Ditto. |
| * cli-out.c (cli_table_begin): Ditto. |
| (cli_table_header): Ditto. |
| (cli_field_int): Ditto. |
| (cli_field_skip): Ditto. |
| (cli_field_string): Ditto. |
| (cli_field_fmt): Ditto. |
| (cli_text): Ditto. |
| (cli_message): Ditto. |
| (out_field_fmt): Ditto. |
| * ui-out.c (default_table_begin): Ditto. |
| (default_table_header): Ditto. |
| (default_field_int): Ditto. |
| (default_field_skip): Ditto. |
| (default_field_string): Ditto. |
| (default_field_fmt): Ditto. |
| (default_text): Ditto. |
| (default_message): Ditto. |
| |
| 2001-06-08 Michael Snyder <msnyder@redhat.com> |
| |
| * breakpoint.c (delete_breakpoint): Pass mark_inserted to |
| remove_breakpoint, so that the subsequent test for |
| bpt->inserted will succeed, and duplicates will be fixed up. |
| |
| 2001-06-08 Per Bothner <per@bothner.com> |
| |
| * dwarf2read.c (set_cu_language): Handle DW_LANG_Java. |
| |
| 2001-06-07 Keith Seitz <keiths@redhat.com> |
| |
| * tracepoint.c (tracepoint_opertation): Add ui event |
| notifications. |
| (trace_pass_command): Ditto. |
| |
| 2001-06-07 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS (Write After Approval): Note the entry criteria. |
| (HP/PA): Jeff Law stepped down |
| |
| 2001-06-07 Jim Blandy <jimb@redhat.com> |
| |
| * gdbarch.sh: Make sure that '[' doesn't interpret interesting |
| variable values as operators. |
| |
| 2001-06-07 Keith Seitz <keiths@redhat.com> |
| |
| * gdb-events.sh: Fix quote escaping which was obsoleted |
| by last patch. |
| |
| 2001-06-07 Keith Seitz <keiths@redhat.com> |
| |
| * gdb-events.sh: Make if statements and tests |
| a little more portable. |
| Don't use shell's echo command to put strings containing |
| escaped characeters into a file -- different flavors of /bin/sh |
| require differnt levels of escaping. Use cat <<EOF instead. |
| Our internal field separator is a colon. Change all |
| commands which assume it is a space. |
| |
| 2001-06-06 Mark Kettenis <kettenis@gnu.org> |
| |
| * lin-lwp.c (struct lwp_info): Add member `resumed'. |
| (iterate_over_lwps): Make sure we can handle CALLBACK deleting the |
| LWP it's called for. |
| (lin_lwp_attach): Mark LWP as resumed to make sure the fake |
| SIGSTOP is reported. |
| (resume_clear_callback): New function. |
| (resume_set_callback): New function. |
| (lin_lwp_resume): Mark all LWP's that we're going to resume as |
| resumed, and unmark all others. |
| (status_callback): Only report a pending wait status if we pretend |
| that LP has been resumed. |
| (resumed_callback): New function. |
| (lin_lwp_wait): Add assertions to check that LWP's are properly |
| marked as resumed. Partially revert 2001-05-25 patch by Michael |
| Snyder: do not resume all threads. Add comment explaining the |
| problems associated with this bit of code. |
| |
| 2001-06-07 Keith Seitz <keiths@redhat.com> |
| |
| * MAINTAINTERS: Syd Polk is stepping down from |
| maintaining libgui. I am replacing him. |
| |
| 2001-06-07 Eli Zaretskii <elis@is.elta.co.il> |
| |
| * config/mips/tm-irix6.h: New file. |
| |
| * config/mips/irix6.mh: New file. |
| |
| * config/mips/irix6.mt: New file. |
| |
| * config/mips/xm-irix6.h: New file. |
| |
| * config/mips/nm-irix6.h: New file. |
| |
| * mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the |
| disassembler info in tm_print_insn_info as appropriate for the N32 |
| ABI. Force N32 ABI to be the default if the CPU is R8000 or |
| R10000. |
| |
| * configure.tgt (mips*-sgi-irix6*): Map to irix6. |
| |
| * configure.host (mips*-sgi-irix6*): Ditto. |
| |
| 2001-06-07 Andrew Cagney <ac131313@redhat.com> |
| |
| * gnu-v3-abi.c: Include "gdb_assert.h". |
| (build_gdb_vtable_type): Replace abort() with gdb_assert(). |
| |
| 2001-06-06 Jim Blandy <jimb@redhat.com> |
| |
| * cp-abi.h: Rearrange code to put documentation comments above the |
| functions we export. The actual function table itself simply |
| refers to those functions. Minor doc fixes. |
| |
| * gdbarch.sh: Changes to effect the following: |
| * gdbarch.c (initialize_non_multiarch): New function. |
| * gdbarch.h (initialize_non_multiarch): New declaration. |
| * arch-utils.c (initialize_current_architecture): For |
| non-multiarch configurations, call initialize_non_multiarch. |
| |
| 2001-06-06 Andrew Cagney <ac131313@redhat.com> |
| |
| * symfile.c (compare_psymbols): Replace PTR with void*. Delete |
| declaration. |
| (compare_symbols): Ditto. |
| |
| 2001-06-06 Jonathan Larmour <jlarmour@redhat.com> |
| |
| * arch-utils.c (generic_prepare_to_proceed): Allow for having |
| stopped due to a Ctrl-C as well as breakpoints. |
| |
| * hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not |
| support thread switches after Ctrl-C. |
| * lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto. |
| * linux-thread.c (linuxthreads_prepare_to_proceed): Ditto. |
| * m3-nat.c (mach3_prepare_to_proceed): Ditto. |
| |
| 2001-06-06 Jim Blandy <jimb@redhat.com> |
| |
| * gdbarch.sh, gdbarch.c: Revert change of 2001-06-01; all |
| per-architecture data should be registered at initialization time, |
| before any gdbarch objects get used, so the generality is |
| unnecessary. |
| |
| 2001-06-06 Keith Seitz <keiths@redhat.com> |
| |
| * gdb-events.sh (function_list): Add tracepoint_create, |
| tracepoint_delete, and tracepoint_modify events. |
| * gdb-events.c: Regenerated. |
| * gdb-events.h: Regenerated. |
| |
| 2001-06-06 Keith Seitz <keiths@redhat.com> |
| |
| * gdb-events.sh: Update copyrights. |
| Change free to xfree. |
| * gdb-events.c: Regenerated. |
| * gdb-events.h: Regenerated. |
| |
| 2001-06-06 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * source.c (mod_path, openp): Use #ifdef HAVE_DOS_BASED_FILE_SYSTEM |
| instead of #if HAVE_DOS_BASED_FILE_SYSTEM. |
| * completer.c: Ditto. |
| * cli/cli-cmds.c (cd_command): Ditto. |
| |
| 2001-06-04 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * mips-tdep.c (show_mipsfpu_command): Remove unused variable msg. |
| (mips_set_processor_type_command): Remove unused variable j. |
| (mips_breakpoint_from_pc): Declare breakpoint instruction |
| sequences as unsigned char, to avoid compiler warnings. |
| |
| * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM |
| instead of system-specific define's like _WIN32 and __MSDOS__. |
| Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and |
| ROOTED_P. |
| (top-level): #include "filenames.h". |
| |
| * solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH |
| instead of SLASH_CHAR, ROOTED_P and SLASH_P. |
| (top-level): #include "filenames.h". |
| |
| * defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions. |
| (SLASH_STRING): Define only for _WIN32. |
| |
| * completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of |
| __MSDOS_. |
| |
| * cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and |
| IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace |
| system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM. |
| (top-level): #include "filenames.h". |
| |
| * go32-nat.c (go32_wait): Change the return value to ptid_t. |
| |
| * config/djgpp/fnchange.lst: Add two new files in the |
| gdb/testsuite/gdb.c++/ directory to the remapped names. |
| |
| * config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB. |
| |
| 2001-06-01 Jim Blandy <jimb@redhat.com> |
| |
| Expand the gdbarch per-architecture data vector as needed, rather |
| than requiring that all per-architecture data be registered before |
| the first gdbarch object is allocated. |
| * gdbarch.sh: Changes to effect the following: |
| * gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete |
| declarations and definitions. |
| (check_gdbarch_data): New function, and declaration. |
| (gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields |
| zero is good enough. |
| (free_gdbarch_data): Tolerate a null data pointer. Free only |
| those data items gdbarch->data actually has allocated. |
| (set_gdbarch_data, gdbarch_data): Call check_gdbarch_data. |
| (gdbarch_update_p): No need to call init_gdbarch_data. |
| |
| 2001-06-01 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-tdep.c (is_float_or_hfa_type_recurse): Call check_typedef() |
| on types that we wish to recurse on. |
| (slot_alignment_is_next_even): New function. |
| (ia64_push_arguments): Call slot_alignment_is_next_even() to |
| examine the type in order to decide if it's necessary to skip |
| an odd slot. |
| |
| 2001-06-01 Michael Snyder <msnyder@redhat.com> |
| |
| * thread.c (delete_step_resume_breakpoint): New function. |
| Maintain internal consistency of the thread list while deleting |
| a step_resume_breakpoint. |
| * gdbthread.h (delete_step_resume_breakpoint): Export. |
| * breakpoint.c (bpstat_find_step_resume_breakpoint): |
| Make thread-aware: don't return a step_resume_breakpoint |
| for the wrong thread. |
| * infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint |
| instead of delete_breakpoint_current_contents. |
| (fetch_inferior_event): Ditto. |
| (handle_inferior_event): Call delete_step_resume_breakpoint |
| instead of delete_breakpoint. |
| * infrun.c (handle_inferior_event): After singlestepping over a |
| thread-specific breakpoint, use currently_stepping() to decide |
| whether to step or continue. |
| |
| 2001-06-01 Jim Blandy <jimb@redhat.com> |
| |
| * gnu-v3-abi.c (gnu_v3_abi_ops, vtable_type_gdbarch_data): Make |
| these static --- there's no reason other files should use these. |
| |
| * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':) |
| Fix memory leak. |
| |
| * partial-stab.h: New complaint: function_outside_compilation_unit. |
| (case N_FUN: case 'f':, case N_FUN: case 'F':): If pst is zero, |
| complain, and don't try to set pst's start address. |
| |
| 2001-05-31 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to |
| match the location at which the kernel is placing the sigcontext |
| struct. |
| |
| * ia64-tdep.c (max_skip_non_prologue_insns): New static global. |
| (refine_prologue_limit): New function. |
| (examine_prologue): Further limit number of instructions |
| scanned by calling refine_prologue_limit(). Revise way in |
| which the end of prologue address is computed for frameless |
| functions. |
| |
| 2001-05-29 Christopher Faylor <cgf@redhat.com> |
| |
| * partial-stab.h: Revert previous patch. |
| |
| 2001-05-29 Christopher Faylor <cgf@redhat.com> |
| |
| * partial-stab.h: Consistently guard against pst being NULL. |
| |
| 2001-05-29 Alexandre Oliva <aoliva@redhat.com> |
| |
| * symfile.c (compare_psymbols, compare_symbols): Declare using |
| PTR, as in the definition. |
| * minsyms.c (compare_minimal_symbols): Likewise. |
| * coffread.c (find_targ_sec): Likewise. |
| * elfread.c (free_elfinfo, elf_locate_sections): Likewise. |
| * mipsread.c (alphacoff_locate_sections): Likewise. |
| * mdebugread.c (compare_blocks): Likewise. |
| |
| 2001-05-25 Nick Duffek <nsd@redhat.com> |
| |
| * solib.c (update_solib_list): Move target_resize_to_sections() |
| into solib_map_sections() loop. |
| (info_sharedlibrary_command): Try bfd_arch_bits_per_address() if |
| bfd_get_arch_size() fails. |
| |
| 2001-05-25 Nick Duffek <nsd@redhat.com> |
| |
| * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c and |
| solib-osf.o. |
| * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o |
| with solib-osf.o and solib.o. |
| * config/alpha/alpha-osf2.mh: Likewise. |
| * config/alpha/alpha-osf3.mh: Likewise. |
| * solib-osf.c: New file, renamed and largely rewritten from |
| osfsolib.c. |
| |
| 2001-05-25 Michael Snyder <msnyder@redhat.com> |
| |
| * lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback, |
| to consume the SIGSTOP generated by PTRACE_ATTACH. |
| (stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed, |
| try again to get the SIGSTOP event. |
| (lin_lwp_wait): Resume all threads when ignoring a signal. |
| This will insure that newly attached threads get resumed. |
| * lin-lwp.c (stop_wait_callback): Discard redundant SIGINT events. |
| * remote.c (remote_write_bytes): Update 'p' packet pointer. |
| |
| 2001-05-25 Jim Blandy <jimb@redhat.com> |
| |
| * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear |
| VALUE_POINTED_TO_OFFSET here; if value_cast doesn't return a |
| useful value, then we should fix that instead. |
| |
| 2001-05-24 Nick Duffek <nsd@redhat.com> |
| |
| * solist.h (struct so_list): Document the requirement that |
| current_sos initialize some fields to 0. |
| |
| 2001-05-24 Mark Kettenis <kettenis@gnu.org> |
| |
| * gnu-nat.c: Include <ctype.h>. |
| (gnu_pid_to_exec_file): Add PID parameter. |
| (set_sig_thread_cmd): Use PIDGET on return value from |
| thread_id_to_pid. |
| (proc_string): Use MERGEPID to construct argument to |
| pid_to_thread_id. |
| |
| 2001-05-22 Kevin Buettner <kevinb@redhat.com> |
| |
| * breakpoint.c (breakpoint_address_is_meaningful): New function. |
| (check_duplicates): Don't compare non-meaningful addresses. |
| |
| 2001-05-22 Michael Snyder <msnyder@redhat.com> |
| |
| * thread-db.c: Allow for defunct zombie threads. |
| (attach_thread): Do not attempt to attach zombie thread. |
| (thread_db_thread_alive): Return false for defunct zombie thread. |
| (find_new_threads_callback): Don't add defunct zombie thread to list. |
| |
| 2001-05-22 Jim Blandy <jimb@redhat.com> |
| |
| Add support for the GNU V3 C++ ABI. |
| (Includes changes by Dan Berlin.) |
| |
| * gnu-v3-abi.c: New file. |
| * minsyms.c: #include "value.h" and "cp-abi.h". |
| (install_minimal_symbols): Check the minimal symbol table for |
| symbols that look mangled in the V3 style, and select the V3 ABI |
| if we find any. |
| * Makefile.in (SFILES): Add gnu-v3-abi.c. |
| (COMMON_OBS): Add gnu-v3-abi.o. |
| (gnu-v3-abi.o): Add new rule. |
| (minsyms.o): Depend on $(cp_abi_h) and $(value_h). |
| |
| 2001-05-21 Jim Blandy <jimb@redhat.com> |
| |
| * values.c (value_primitive_field): If we're extracting a base |
| class, then the type of the result should be the base class being |
| extracted, not the type of which it is a base class. |
| |
| * value.h (struct value): Doc fix, and rearrange members to place |
| them near their explanations. |
| |
| 2001-05-21 Michael Snyder <msnyder@redhat.com> |
| |
| * remote.c (remote_async_wait): Added new variable fieldsize. |
| Add fieldsize (return value of hex2bin) to string pointer p. |
| |
| 2001-05-20 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * m68hc11-tdep.c (m68hc11_pop_frame): Fix stack pointer computation. |
| (m68hc11_analyze_instruction): Update the pc correctly. |
| (m68hc11_guess_from_prologue): Take into account the stack correction |
| for the saving address. |
| |
| 2001-05-07 Daniel Berlin <dan@cgsoftware.com> |
| |
| Changes by Jim Ingham: |
| |
| * values.c (value_change_enclosing_type): New function. If the |
| new enclosing type is larger than the old one, we need to allocate |
| more space. |
| * value.h: Add value_change_enclosing_type prototype. |
| * valops.c (value_cast): Use it. |
| (value_assign): Use it. |
| (value_addr): Use it. |
| (value_ind): Use it. |
| (value_full_object): Use it. |
| |
| 2001-05-07 Daniel Berlin <dan@cgsoftware.com> |
| |
| * values.c (value_static_field): Handle static fields that have a |
| constant value. |
| |
| 2001-05-17 Michael Snyder <msnyder@redhat.com> |
| |
| * blockframe.c (create_new_frame): Zero all the fields via memset, |
| rather than zeroing them one by one. |
| |
| 2001-05-17 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * top.c (user_args): Remove unused declaration. |
| |
| 2001-05-16 Michael Snyder <msnyder@redhat.com> |
| |
| * infcmd.c (do_registers_info): Move alloca outside of loop. |
| |
| 2001-05-15 John S Kallal <jskallal@home.com> |
| |
| * remote.c (remote_wait): Added new variable fieldsize. |
| Add fieldsize (return value of hex2bin) to string pointer p. |
| |
| 2001-05-15 Mark Kettenis <kettenis@gnu.org> |
| |
| * sparc-tdep.c (sparc_gdbarch_init): Get the architecture from |
| info.bfd_arch_info. |
| |
| 2001-05-14 Kevin Buettner <kevinb@redhat.com> |
| |
| * lin-lwp.c (detach_callback, lin_lwp_wait, lin_lwp_pid_to_str): |
| Adjust format strings for printing LWPs to account for the fact |
| that the type returned by GET_LWP() is now a long instead of an |
| int. |
| |
| 2001-05-14 Kevin Buettner <kevinb@redhat.com> |
| |
| * inferior.h (null_ptid, minus_one_ptid): New variable declarations. |
| (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp) |
| (ptid_get_tid, ptid_equal): New function declarations. |
| * infrun.c (null_ptid, minus_one_ptid): New variables. |
| (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp) |
| (ptid_get_tid, ptid_equal): New functions. |
| (_initialize_infrun): Initialize null_ptid, minus_one_ptid, |
| inferior_ptid, and target_last_wait_ptid. |
| |
| * defs.h (ptid_t): Redefine to be a struct rather than an int. |
| (pid_to_ptid, null_ptid, ptid_equal): Delete these macros. |
| (PIDGET, TIDGET, MERGEPID): Redefine these macros using the |
| new ptid accessors and constructor. |
| |
| * config/i386/tm-i386v42mp.h (PIDGET, TIDGET, LIDGET, MERGEPID, |
| MKLID, MKTID, ISTID): Provide new definitions for these macros. |
| The old macros are retained, but disabled via #if 0 in order |
| to aid in future restructuring. See FIXME. |
| |
| * arm-linux-nat.c (PIDGET, TIDGET): Delete macro definitions. |
| * i386-linux-nat.c (PIDGET, TIDGET): Likewise. |
| * infptrace.c (PIDGET, TIDGET): Likewise. |
| * lin-lwp.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise. |
| * lin-thread.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise. |
| * proc-service.c (MERGEPID): Likewise. |
| * procfs.c (PIDGET, TIDGET, MERGEPID): Likewise. |
| * thread-db.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise. |
| * config/nm-linux.h (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise. |
| * config/i386/tm-i386sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID): |
| Likewise. |
| * config/sparc/tm-sun4sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID): |
| Likewise. |
| |
| * lin-lwp.c (THREAD_FLAG): Delete macro definition. |
| (GET_LWP): Redefine in terms of ptid_get_lwp(). |
| (GET_PID): Redefine in terms of ptid_get_pid(). |
| (is_lwp): Redefine without the need for THREAD_FLAG. |
| (BUILD_LWP): Redefine in terms of ptid_build(). |
| * lin-thread.c (THREAD_FLAG): Delete macro definition. |
| (GET_LWP): Redefine in terms of ptid_get_lwp(). |
| (GET_PID): Redefine in terms of ptid_get_pid(). |
| (GET_THREAD): Redefine in terms of ptid_get_tid(). |
| (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build(). |
| (is_lwp, is_thread): Redefine. |
| (linux_child_wait, check_all_signal_numbers) |
| (linuxthreads_discard_global_state, attach_thread): Declare these |
| functions to squash warnings about missing declarations. |
| * sol-thread.c (THREAD_FLAG): Delete macro definition. |
| (GET_PID): Redefine in terms of ptid_get_pid(). |
| (GET_LWP): Redefine in terms of ptid_get_lwp(). |
| (GET_THREAD): Redefine in terms of ptid_get_tid(). |
| (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build(). |
| (is_lwp, is_thread): Redefine. |
| * thread-db.c (THREAD_FLAG): Delete macro definition. |
| (GET_PID): Redefine in terms of ptid_get_pid(). |
| (GET_LWP): Redefine in terms of ptid_get_lwp(). |
| (GET_THREAD): Redefine in terms of ptid_get_tid(). |
| (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build(). |
| (is_lwp, is_thread): Redefine. |
| |
| * corelow.c (add_to_thread_list, get_core_register_section): |
| Eliminate hacks needed to prevent regressions when inferior_ptid |
| wasn't wide enough to hold the core file thread id in the pid |
| component of inferior_ptid. |
| |
| 2001-05-14 Michael Snyder <msnyder@redhat.com> |
| |
| * remote.c (hex2bin): Make first argument const. |
| Require explicit count, don't accept null-terminated str. |
| (remote_resume, remote_async_resume): White space fix-up. |
| (remote_write_bytes): Set nr_bytes to return value of bin2hex. |
| |
| 2001-05-13 Mark Kettenis <kettenis@gnu.org> |
| |
| * symtab.c (lookup_symtab_1): Use lbasename (NAME) instead of |
| basename (NAME). The FreeBSD basename returns a pointer to a |
| static buffer, even if it's simply returning a string identical to |
| its argument. |
| (lookup_partial_symtab): Likewise. |
| |
| 2001-05-14 Michael Snyder <msnyder@redhat.com> |
| |
| * solib.c, solib.h: Add comment for function no_shared_libraries. |
| |
| 2001-05-14 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib.h (no_shared_libraries): Make declaration match definition |
| in solib.c. |
| |
| 2001-05-14 Andrew Cagney <ac131313@redhat.com> |
| |
| * remote.c (remote_write_bytes): Set nr_bytes before returning it. |
| * solib.h (no_shared_libraries): Declare. |
| |
| 2001-05-12 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh (struct gdbarch_info): Delete field bfd_architecture. |
| (gdbarch_update_p): Rewrite logic filling in INFO struct. Use |
| user specified values when available. |
| * rs6000-tdep.c (rs6000_gdbarch_init): Update. Get the |
| architecture from info.bfd_arch_info. |
| * gdbarch.c, gdbarch.h: Regenerate. |
| |
| 2001-05-12 Fernando Nasser <fnasser@redhat.com> |
| |
| * remote-e7000.c (e7000_open): Check for bad baud rate. |
| * remote-st.c (st2000_open): Ditto. |
| |
| 2001-05-11 Jim Blandy <jimb@redhat.com> |
| |
| * thread.c (do_captured_list_thread_ids): Use ui_out_tuple_begin |
| and ui_out_tuple_end instead of ui_out_list_begin and |
| ui_out_list_end. |
| |
| * Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list of |
| dependencies. Reorder dependencies to match #includes in file, |
| for easier verification. |
| |
| Fri May 11 13:32:50 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * breakpoint.c: Replace ui_out_list_begin, ui_out_list_end and |
| make_cleanup_ui_out_list_end with ui_out_tuple_begin, |
| ui_out_tuple_end and make_cleanup_ui_out_tuple_begin_end. |
| * cli/cli-setshow.c: Ditto. |
| * printcmd.c: Ditto. |
| * stack.c: Ditto. |
| |
| * ui-out.h (enum ui_out_type): Fix tipo - tupple -> tuple. |
| * ui-out.c (ui_out_list_begin): Delete ``lstid'' parameter. |
| (ui_out_tuple_begin): New function. |
| (ui_out_tuple_end): New function. |
| (ui_out_tuple_begin_end): New function. |
| (make_cleanup_ui_out_list_begin_end): Replace |
| make_cleanup_ui_out_list_end function. |
| * ui-out.h (ui_out_list_begin): Update declaration. |
| (make_cleanup_ui_out_list_begin_end): Replace |
| make_cleanup_ui_out_list_end declaration. |
| (ui_out_tuple_begin, ui_out_tuple_end): Declare. |
| (ui_out_tuple_begin_end): Declare. |
| |
| 2001-05-11 Jim Blandy <jimb@redhat.com> |
| |
| * gnu-v2-abi.c: Don't #include "gdb_regex.h". We don't use it. |
| |
| 2001-05-11 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2001-03-26 Rodney Brown <RodneyBrown@mynd.com> |
| * config/pa/tm-hppa.h: Remove trigraph. |
| * hp-symtab-read.c (hpread_type_translate): Provide return value. |
| (hpread_read_struct_type): Remove trigraph. Add parameter in |
| `warning'. |
| (hpread_read_array_type): Provide return value. |
| (hpread_type_lookup): Avoid ambiguous `else'. Provide return |
| value. |
| * hppa-tdep.c (initialize_hp_cxx_exception_support): Remove |
| trigraph. |
| |
| 2001-05-11 Jim Blandy <jimb@redhat.com> |
| |
| * mips-tdep.c (mips_store_return_value, |
| mips_extract_return_value): Pass arguments to |
| return_value_location in the proper order. |
| |
| 2001-05-11 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (VERSION): Delete. Moved to file ``version.in''. |
| (version.c): Depends on file ``version.in''. Extract version |
| number from ``version.in'' file. |
| (clean mostlyclean): Update. |
| * version.in: New file. |
| * NEWS: Update. |
| |
| 2001-05-11 Kevin Buettner <kevinb@redhat.com> |
| |
| * breakpoint.c (set_raw_breakpoint): Add new parameter |
| representing the breakpoint's type. Adjust all callers. |
| (create_longjmp_breakpoint, create_temp_exception_breakpoint) |
| (create_thread_event_breakpoint): Don't test for zero return |
| value from set_raw_breakpoint(). It can never be zero. |
| (create_exception_catchpoint, watch_command_1): Move logic |
| which calculates the breakpoint type prior to the call to |
| set_raw_breakpoint(). |
| |
| 2001-05-11 Fernando Nasser <fnasser@redhat.com> |
| |
| * ser-unix.c (rate_to_code): Issue warning if baud rate is invalid. |
| (hardwire_setbaudrate): Set errno to EINVAL and return with error |
| if the conversion of the baud rate to code fails. |
| |
| 2001-05-10 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.h (make_cleanup_ui_out_begin_end): Declare. |
| * ui-out.c (struct ui_out_end_cleanup_data): Define. |
| (do_cleanup_end): New function. Replace do_list_end. |
| (make_cleanup_ui_out_end): New function. |
| (make_cleanup_ui_out_begin_end): New function. |
| (make_cleanup_ui_out_list_end): Use make_cleanup_ui_out_end. |
| |
| 2001-05-10 Elena Zannoni <ezannoni@redhat.com> |
| |
| * MAINTAINERS: Declare xcoffread.c open to all maintainers, |
| and make Kevin Buettner (kevinb@redhat.com) the reference person. |
| |
| 2001-05-10 Elena Zannoni <ezannoni@redhat.com> |
| |
| * proc-api.c (ioctl_with_trace): Fix uninitialized variable. |
| |
| 2001-05-10 Fernando Nasser <fnasser@redhat.com> |
| |
| * MAINTAINERS: Add testsuite subdirectory co-maintainers. |
| |
| Thu May 10 16:26:47 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * Makefile.in (mi-main.o): Compile with -Werror. |
| |
| 2001-05-10 Michael Snyder <msnyder@redhat.com> |
| |
| * remote.c (remote_open_1): Call no_shared_libraries, so that |
| symbols for shared libraries can be reloaded per session. |
| (remote_async_open_1): Ditto. |
| * remote.c (bin2hex, hex2bin): New functions. Factor out these |
| two conversions which are coded for repeatedly in this module. |
| (remote_threads_extra_info, remote_wait, remote_async_wait, |
| store_register_using_P, remote_store_registers, remote_write_bytes, |
| remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead |
| of coding the conversions inline. |
| (fromhex): Not exported, change from extern to static. |
| |
| 2001-05-10 Andrew Cagney <ac131313@redhat.com> |
| |
| * arch-utils.c (initialize_current_architecture): Delete obsolete |
| ``info architecture'' command. |
| (info_architecture): Delete function. |
| |
| 2001-05-10 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (5.1, 5.2): Update. |
| |
| 2001-05-09 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Jim Ingham is no longer maintaining Arm related |
| stuff. |
| |
| 2001-05-10 Keith Seitz <keiths@cygnus.com> |
| |
| * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.o |
| and gdbtk-stack.o. |
| (SUBDIR_GDBTK_SRCS): Ditto for the sources. |
| (gdbtk-bp.o): New rule. |
| (gdbtk-register.o): New rule. |
| (gdbtk-stack.o): New rule. |
| (gdbtk-cmds.o): Update dependencies. |
| (gdbtk.o): Ditto. |
| (gdbtk-hooks.o): Ditto. |
| (gdbtk-varobj.o): Ditto. |
| |
| 2001-05-10 Fernando Nasser <fnasser@redhat.com> |
| |
| * varobj.c (c_number_of_children): Fix memory leak. Delete unwanted old |
| variables, not just unregister them. |
| |
| 2001-05-10 Fernando Nasser <fnasser@redhat.com> |
| |
| * varobj.c (c_number_of_children): Check for target type of void*, |
| not the target type name. Allow dereferencing char*. |
| |
| 2001-05-10 Fernando Nasser <fnasser@redhat.com> |
| |
| * symfile.c (symbol_file_add_main_1): New static function. |
| Passes the flags arguments to symbol_file_add() and takes care |
| of any necessary reinitializations. |
| (symbol_file_command): Call symbol_file_add_main_1() instead of |
| symbol_file_add(). |
| (symbol_file_add_main): Ditto. |
| |
| 2001-05-09 Kevin Buettner <kevinb@redhat.com> |
| |
| * lin-lwp.c (lin_lwp_pid_to_str): Revert inadvertent format |
| string change in 2001-05-03 changes. |
| (lin_lwp_wait): Revert GET_LWP coercion introduced in 2001-05-03 |
| changes. |
| |
| 2001-05-09 Kevin Buettner <kevinb@redhat.com> |
| |
| * lin-lwp.c (lin_lwp_attach): Use PIDGET() to fetch the pid |
| component from inferior_ptid. |
| (lin_lwp_detach): Use pid_to_ptid() to convert from a pid to a |
| ptid. |
| |
| 2001-05-09 Elena Zannoni <ezannoni@redhat.com> |
| |
| * sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS |
| conditional for help with connections through parallel ports, |
| given that the actual code for downloading through a parallel port |
| is not conditionalized. |
| |
| * sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is |
| unmaintaned, and probably on its way to obsolescence. |
| |
| 2001-05-09 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_frame_saved_pc): New function. |
| * config/i386/tm-i386.h (FRAME_SAVED_PC): Redefine in terms of |
| i386_frame_saved_pc. |
| (i386_frame_saved_pc): New prototype. |
| |
| * i386-tdep.c (i386_register_virtual_type): New function. |
| (i386_register_convertible): New function. |
| * config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms |
| of i386_register_virtual_type. |
| (REGISTER_CONVERTIBLE): Redefine in terms of |
| i386_register_convertible. |
| (i386_register_virtual_type, i386_register_convertible): New |
| prototypes. |
| |
| 2001-05-08 Jim Blandy <jimb@redhat.com> |
| |
| * Makefile.in (mn10300-tdep.o): New rule. |
| |
| * Makefile.in (gdb_string_h): Define. Use it throughout. |
| Some rules were already using this, even though it isn't defined. |
| |
| * Makefile.in (obstack_h, target_h): Define; these are already |
| used elsewhere, but have been expanding to the empty string. |
| (memattr_h): Define; needed by target_h. |
| |
| * mn10300-tdep.c (mn10300_extract_return_value): Mark this as |
| static. (This was accidentally omitted from the earlier patch.) |
| |
| * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): New function. |
| (mn10300_gdbarch_init): Register it as the architecture's |
| dwarf2_reg_to_regnum method. |
| |
| Correct and expand handling of `movm' instruction, and register |
| saves in general. |
| * config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM, |
| MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions. |
| (enum movm_register_bits): New enum. |
| * mn10300-tdep.c (set_movm_offsets): Use symbolic names for the |
| bits, not hex literals. Handle the `other', `exreg0', and |
| `exother' bits. Correct handling of `exreg1': it saves r4, r5, |
| r6, and r7, not r2, r3, r4, and r5. |
| (saved_regs_size): New function. |
| (mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead |
| of computing the same thing inline, incorrectly. |
| |
| * mn10300-tdep.c (mn10300_gdbarch_init): We do have a |
| dummy_breakpoint_offset; it's zero. |
| |
| * mn10300-tdep.c (mn10300_pop_frame): Split the mn10300-specific |
| stuff out into mn10300_pop_frame_regular, and use |
| generic_pop_current_frame. This lets us share code, and also |
| makes this function's prototype match that expected by gdbarch. |
| Make this function static. |
| (mn10300_pop_frame_regular): New function. |
| (mn10300_gdbarch_init): Register mn10300_pop_frame as the |
| gdbarch's pop_frame method. |
| * config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition. |
| (mn10300_pop_frame): Delete declaration. |
| |
| * mn10300-tdep.c (mn10300_saved_pc_after_call, |
| mn10300_extract_return_value, |
| mn10300_extract_struct_value_address, mn10300_store_return_value, |
| mn10300_use_struct_convention, mn10300_breakpoint_from_pc, |
| mn10300_frame_chain, mn10300_skip_prologue, |
| mn10300_push_arguments, mn10300_push_return_address, |
| mn10300_store_struct_return, mn10300_frame_saved_pc, |
| mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs): |
| Make these functions static; they should only be visible to the |
| outside world as gdbarch methods. |
| |
| * config/mn10300/tm-mn10300.h (mn10300_find_callers_reg): Delete |
| unused declaration. |
| |
| * mn10300-tdep.c (mn10300_gdbarch_init): Put the gdbarch methods |
| in some rational order. |
| |
| * mn10300-tdep.c (mn10300_gdbarch_init): Rather than using |
| generic_pc_in_call_dummy, use pc_in_call_dummy_at_entry_point. |
| |
| Use gdbarch for most target parameters for the MN10300, rather |
| than the tm-*.h file. |
| * config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE, |
| REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC, |
| FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN, |
| SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS, |
| FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC, |
| EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS, |
| STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE, |
| FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS, |
| FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY, |
| CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET, |
| CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS, |
| TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME, |
| SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY, |
| REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER): |
| Delete definitions. We register gdbarch methods for these now. |
| (struct frame_info, struct type, struct value): Delete forward |
| declarations of these types; they're no longer necessary, since we |
| don't have function declarations here any more. |
| * mn10300-tdep.c: #include "arch-utils.h", to get declarations for |
| some default gdbarch methods. |
| (mn10300_store_struct_return): Return void, as expected by |
| gdbarch. |
| (mn10300_init_extra_frame_info): Take initial `fromleaf' argument, |
| as expected by gdbarch. |
| (mn10300_frame_init_saved_regs): Provide dummy definition for |
| this, as required by gdbarch. |
| (mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected |
| by gdbarch. Register gdbarch methods or values for all the stuff |
| removed from tm-10300.h, listed above. |
| |
| 2001-05-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * cli-out.c (cli_begin, cli_end): Replace cli_list_begin and |
| cli_list_end. |
| (cli_ui_out_impl): Update. |
| |
| * ui-out.c (default_begin, default_end): Replace |
| default_list_begin and default_list_end. |
| (default_ui_out_impl): Update. |
| (uo_begin, uo_end): Replace ou_list_begin and uo_list_end. |
| (ui_out_begin, ui_out_end): Replace ui_out_list_begin and |
| ui_out_list_end. |
| (ui_out_list_begin, ui_out_list_end): New. Compatibility |
| functions. |
| (struct ui_out_level): Add field type. |
| (push_level, pop_level): Update. Add type parameter. |
| |
| * ui-out.h (enum ui_out_type): Declare. |
| (ui_out_begin, ui_out_end): Declare. |
| (ui_out_begin_ftype, ui_out_end_ftype): Replace list_begin_ftype |
| and list_end_ftype. |
| (struct ui_out_impl): Update. |
| |
| 2001-05-07 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.h (list_begin_ftype, list_end_ftype): Rename argument |
| ``list_flag'' to ``depth''. |
| * ui-out.c (default_list_begin, default_list_end): Update. |
| (uo_list_begin, uo_list_end): Update. |
| (MAX_UI_OUT_LEVELS): Define. |
| (struct ui_out_level): Define. |
| (top-level): Include "gdb_assert.h". |
| (struct ui_out): Add fields ``level'' and ``levels''. Delete |
| fields ``list_flag'' and ``field_count''. |
| (ui_out_new): Update. |
| (verify_field_proper_position): Update. |
| (current_level, push_level, pop_level): New functions. |
| (ui_out_list_begin): Use push_level. |
| (ui_out_list_end): Use pop_level. |
| (ui_out_field_int): Use current_level. |
| (ui_out_field_skip): Ditto. |
| (ui_out_field_fmt): Ditto. |
| |
| 2001-05-08 Michael Snyder <msnyder@redhat.com> |
| |
| * language.c (longest_local_hex_string_custom): Strlen test is |
| inverted -- reverse the sense of the test. |
| |
| 2001-05-08 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/i386/tm-i386v.h (struct frame_info, struct |
| frame_saved_regs): Remove declarations. |
| (i386_frame_num_args): Remove prototype. |
| |
| 2001-05-07 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: I'm no longer actively maintaining the mn10300 |
| target. |
| |
| 2001-05-04 Andrew Cagney <ac131313@redhat.com> |
| |
| * main.c (captured_main): Delete #ifndef _WIN32 conditional for |
| WinGDB. |
| |
| 2001-05-06 Kevin Buettner <kevinb@redhat.com> |
| |
| * inferior.h (save_inferior_ptid): Declare. |
| * infrun.c (save_inferior_ptid, restore_inferior_ptid): Define. |
| |
| * hpux-thread.c (save_inferior_ptid, restore_inferior_ptid): |
| Delete these functions. |
| * lin-lwp.c (save_inferior_ptid, restore_inferior_ptid): Likewise. |
| * lin-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise. |
| * linux-thread.c (save_inferior_ptid, restore_inferior_ptid): |
| Likewise. |
| * proc-service.c (save_inferior_ptid, restore_inferior_ptid): |
| Likewise. |
| * sol-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise. |
| * thread-db.c (save_inferior_ptid, restore_inferior_ptid): Likewise. |
| |
| * somsolib.c (reset_inferior_ptid): Delete. |
| (som_solib_remove_inferior_hook): Use save_inferior_ptid() to |
| build the cleanup struct. |
| |
| * breakpoint.c (reattach_breakpoints, detach_breakpoints): Use |
| a cleanup to save/restore inferior_ptid. |
| |
| 2001-05-06 Mark Kettenis <kettenis@gnu.org> |
| |
| Implement attach/detach for multi-threaded programs on Linux. |
| * thread-db.c (keep_thread_db): Adjust comment. |
| (deactivate_target): Removed. |
| (thread_db_new_objfile): Don't call deactivate_target. Implement |
| guts of deactivate_target inline instead. |
| (attach_thread): Call ATTACH_LWP unconditionally if defined. |
| (thread_db_attach): New function. |
| (thread_db_detach): Don't call deactivate_target. Do necessary |
| cleanup inline instead. Set inferior_ptid to LWP corresponding to |
| the current user-level thread. |
| (thread_db_kill): Set inferior_ptid to LWP corresponding to the |
| current user-level thread. |
| (thread_db_create_inferior): Deactivate target vector if |
| KEEP_THREAD_DB is zero. |
| (thread_db_mourn_inferior): Don't call deactivate_target. Do |
| necessary cleanup inline instead. |
| (init_thread_db_ops): Initialize to_attach field to |
| thread_db_attach. |
| * lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype. |
| (stop_wait_callback): Add prototype. |
| (init_lwp_list): Add comment about when to re-initialize the LWP |
| list. |
| (lin_lwp_attach_lwp): Only call ptrace for cloned processes. |
| Avoid adding publicates to the LWP list. Only mark an LWP as |
| signalled if it doesn't correspond to a cloned process. |
| (lin_lwp_attach): Add initial process to the LWP list. Make sure |
| it's stopped and fake a SIGSTOP. |
| (detach_callback): New function. |
| (lin_lwp_detach): Implement. |
| (lin_lwp_create_inferior): Don't re-initialize LWP list here. |
| Call child_ops.to_create_inferior directly instead of via |
| target_beneath local. |
| (lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior |
| directly instead of via target_beneath local. |
| |
| 2001-05-06 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * symtab.c (lookup_symtab_1, lookup_partial_symtab): Use basename |
| instead of non-portable search for `/'. Use FILENAME_CMP instead |
| of STREQ, to account for case-insensitive filesystems. |
| (top-level): #include "filenames.h". |
| |
| 2001-05-05 Jim Blandy <jimb@redhat.com> |
| |
| * breakpoint.c (check_duplicates): Use the breakpoint's type, not |
| its address, to decide whether it's a watchpoint or not. Zero |
| is a valid code address. |
| (update_breakpoints_after_exec): Admonishing comments. |
| * breakpoint.h (struct breakpoint): Doc fixes. |
| |
| * breakpoint.c (check_duplicates): Take a breakpoint object as an |
| argument, rather than an address and section. All callers changed. |
| |
| 2001-05-03 Kevin Buettner <kevinb@redhat.com> |
| |
| * defs.h (ptid_t): New typedef. |
| (pid_to_ptid, null_ptid, minus_one_ptid, ptid_equal): New macros. |
| |
| * a68v-nat.c, alphabsd-nat.c, arch-utils.c, arm-linux-nat.c, |
| blockframe.c, breakpoint.c, breakpoint.h, |
| config/i386/nm-i386sol2.h, config/i386/tm-i386sco5.h, |
| config/ia64/nm-linux.h, config/m68k/nm-hp300bsd.h, |
| config/mips/nm-irix4.h, config/mips/nm-irix5.h, |
| config/pa/nm-hppah.h, config/pa/tm-hppa.h, |
| config/rs6000/nm-rs6000.h, config/sparc/nm-sun4sol2.h, |
| corelow.c, cxux-nat.c, d10v-tdep.c, dink32-rom.c, |
| dve3900-rom.c, fork-child.c, frame.c, gnu-nat.c, go32-nat.c, |
| hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c, |
| hpux-thread.c, i386-linux-nat.c, i386aix-nat.c, i386b-nat.c, |
| i386bsd-nat.c, i386gnu-nat.c, i386mach-nat.c, i386nbsd-nat.c, |
| infcmd.c, inferior.h, inflow.c, infptrace.c, infrun.c, |
| inftarg.c, infttrace.c, lin-lwp.c, lin-thread.c, |
| linux-thread.c, lynx-nat.c, m3-nat.c, m32r-rom.c, |
| m68knbsd-nat.c, m88k-nat.c, mac-nat.c, mips-nat.c, |
| mon960-rom.c, monitor.c, ns32knbsd-nat.c, ocd.c, ppc-bdm.c, |
| ppcnbsd-nat.c, proc-service.c, procfs.c, ptx4-nat.c, |
| regcache.c, remote-adapt.c, remote-array.c, remote-bug.c, |
| remote-e7000.c, remote-es.c, remote-mips.c, remote-mm.c, |
| remote-nindy.c, remote-os9k.c, remote-rdi.c, remote-rdp.c, |
| remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c, |
| remote-vx.c, remote.c, rs6000-nat.c, sol-thread.c, |
| solib-aix5.c, solib-svr4.c, somsolib.c, sparc-nat.c, |
| standalone.c, sun3-nat.c, sun386-nat.c, symm-nat.c, target.c, |
| target.h, thread-db.c, thread.c, top.c, ultra3-nat.c, |
| uw-thread.c, v850ice.c, win32-nat.c, wince.c, xcoffsolib.c |
| (inferior_pid): Rename to inferior_ptid everywhere - even in |
| comments and obsolete ports. In cases where this variable |
| really is supposed to be used as a process id, use PIDGET() to |
| extract the process id component from inferior_ptid. The |
| other cases, either involving other variables whose types had |
| to be changed or functions whose signatures had to changed |
| are listed separately below. |
| |
| * arm-linux-nat.c (get_thread_id): Change type of argument |
| representing a combined process/thread id from ``int'' to |
| ``ptid_t''. Also change parameter name to ptid. |
| * breakpoint.h, breakpoint.c (breakpoint_thread_match): Likewise. |
| * corelow.c (core_file_thread_alive): Likewise. |
| * d10v-tdep.c (d10v_read_pc, d10v_write_pc): Likewise. |
| * defs.h (*target_wait_hook): Likewise. |
| * gdbthread.h (thread_info, delete_thread, pid_to_thread_id) |
| (find_thread_pid, save_infrun_state, load_infrun_state): Likewise. |
| * gnu-nat.c (gnu_thread_alive, gnu_pid_to_str, gnu_wait) |
| (gnu_resume): Likewise. |
| * go32-nat.c (go32_wait, go32_resume): Likewise. |
| * h8500-tdep.c (h8500_read_pc, h8500_write_pc): Likewise. |
| * hppa-tdep.c (target_read_pc, target_write_pc): Likewise. |
| * hppah-nat.c (child_pid_to_str, hppa_tid_to_str, |
| (hppa_pid_or_tid_to_str, child_post_startup_inferior) |
| (child_thread_alive): Likewise. |
| * hpux-thread.c (hpux_thread_notice_signals, hpux_thread_alive) |
| (hpux_pid_to_str, hpux_thread_wait, hpux_thread_resume): Likewise. |
| * i386-linux-nat.c (child_resume): Likewise. |
| * ia64-linux-nat.c (enable_watchpoints_in_psr, fetch_debug_register) |
| (store_debug_register, fetch_debug_register_pair) |
| (store_debug_register_pair, ia64_linux_insert_watchpoint) |
| (ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint): |
| Likewise. |
| * ia64-tdep.c (ia64_read_pc, ia64_write_pc): Likewise. |
| * inferior.h (read_pc_pid, generic_target_read_pc, write_pc_pid) |
| (generic_target_write_pc, ptrace_wait, child_resume) |
| (get_last_target_status): Likewise. |
| * infptrace.c (ptrace_wait, child_resume): Likewise. |
| * inftarg.c (child_wait, child_post_wait, child_thread_live) |
| (child_pid_to_str): Likewise. |
| * infttrace.c (ptrace_wait, child_thread_alive, child_resume) |
| (hppa_pid_or_tid_to_str, child_post_startup_inferior): Likewise. |
| * lin-lwp.c (add_lwp, delete_lwp, find_lwp_pid, lin_lwp_attach_lwp) |
| (lin_lwp_resume, lin_lwp_wait, lin_lwp_thread_alive) |
| (lin_lwp_pid_to_str): Likewise. |
| * lin-thread.c (thread_db_alive, thread_db_pid_to_str) |
| (thread_db_resume, thread_db_wait): Likewise. |
| * linux-thread.c (linuxthreads_thread_alive, linuxthreads_pid_to_str) |
| (linuxthreads_resume, linuxthreads_wait): Likewise. |
| * lynx-nat.c (child_wait, child_thread_alive, child_resume) |
| (child_pid_to_str): Likewise. |
| * m3-nat.c (mach_really_wait, m3_resume): Likewise. |
| * mac-nat.c (child_wait, child_resume): Likewise. |
| * mips-tdep.c (mips_read_pc): Likewise. |
| * monitor.c (monitor_wait, monitor_resume): Likewise. |
| * ocd.c, ocd.h (ocd_thread_alive, ocd_resume): Likewise. |
| * ppc-bdm.c (bdm_ppc_wait): Likewise. |
| * procfs.c (do_attach, procfs_wait, procfs_resume) |
| (procfs_notice_signals, procfs_thread_alive, procfs_pid_to_str) |
| (procfs_set_watchpoint, procfs_stopped_by_watchpoint) |
| (procfs_find_LDT_entry): Likewise. |
| * regcache.c (read_register_pid, read_signed_register_pid) |
| (write_register_pid, generic_target_read_pc, read_pc_pid) |
| (generic_target_write_pc, write_pc_pid): Likewise. |
| * regcache.h (read_register_pid, read_signed_register_pid) |
| (write_register_pid): Likewise. |
| * remote-adapt.c (adapt_wait, adapt_resume): Likewise. |
| * remote-array.c (array_wait, array_resume): Likewise. |
| * remote-bug.c (bug_wait, bug_resume): Likewise. |
| * remote-e7000.c (e7000_wait, e7000_resume): Likewise. |
| * remote-eb.c (eb_wait, eb_resume): Likewise. |
| * remote-es.c (es1800_wait, es1800_resume): Likewise. |
| * remote-mips.c (mips_wait, mips_resume): Likewise. |
| * remote-mm.c (mm_wait, mm_resume): Likewise. |
| * remote-nindy.c (nindy_wait, nindy_resume): Likewise. |
| * remote-os9k.c (rombug_wait, rombug_resume): Likewise. |
| * remote-rdi.c (arm_rdi_wait, arm_rdi_resume): Likewise. |
| * remote-rdp.c (remote_rdp_resume, remote_rdp_wait): Likewise. |
| * remote-sds.c (sds_wait, sds_resume): Likewise. |
| * remote-sim.c (gdbsim_wait, gdbsim_resume): Likewise. |
| * remote-st.c (st2000_wait, st2000_resume): Likewise. |
| * remote-udi.c (udi_wait, udi_resume): Likewise. |
| * remote-vx.c (vx_wait, vx_resume): Likewise. |
| * remote.c (remote_current_thread, remote_resume, remote_wait) |
| (remote_async_resume, remote_async_wait, remote_cisco_wait) |
| (remote_thread_alive): Likewise. |
| * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_resume) |
| (sol_thread_wait, sol_thread_notice_signals, sol_thread_alive) |
| (solaris_pid_to_str): Likewise. |
| * symm-nat.c (child_wait, child_resume): Likewise. |
| * target.c (debug_to_resume, debug_to_wait, debug_to_post_wait) |
| (debug_to_notice_signals, debug_to_thread_alive) |
| (normal_target_post_startup_inferior, normal_pid_to_str) |
| (debug_to_post_startup_inferior): Likewise. |
| * target.h (to_resume, to_wait, to_post_wait) |
| (to_post_startup_inferior, to_notice_signals, to_thread_alive) |
| (to_pid_to_str [all in struct target_ops]): Likewise. |
| (child_post_wait, child_thread_alive, normal_pid_to_str): Likewise. |
| * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait) |
| (attach_thread, detach_thread, thread_db_resume, check_event) |
| (thread_db_post_startup_inferior, thread_db_thread_alive) |
| (thread_db_pid_to_str): Likewise. |
| * thread.c (add_thread, delete_thread, find_thread_pid) |
| (pid_to_thread_id, in_thread_list, load_infrun_state) |
| (save_infrun_state, switch_to_thread, restore_current_thread) |
| (make_cleanup_restore_current_thread): Likewise. |
| * top.c (target_wait_hook): Likewise. |
| * uw-thread.c (dbgpid, thr_to_lwp, lwp_to_thr, add_thread_uw) |
| (uw_thread_resume, libtrhead_stub, uw_thread_wait, uw_thread_alive) |
| (uw_thread_pid_to_str): Likewise. |
| * v850ice.c (v850ice_wait, v850ice_resume): Likewise. |
| * win32-nat.c (child_wait, child_resume, win32_child_thread_alive) |
| (cywin_pid_to_str): Likewise. |
| * wince.c (child_wait, child_resume, win32_child_thread_alive): |
| Likewise. |
| * config/nm-linux.h (linuxthreads_pid_to_str): Likewise. |
| * config/nm-lynx.h (child_wait, lynx_pid_to_str): Likewise. |
| * config/alpha/nm-linux.h (lin_lwp_attach_lwp): Likewise. |
| * config/arm/nm-linux.h (lin_lwp_attach_lwp): Likewise. |
| * config/h8500/tm-h8500.h (h8500_read_pc, h8500_write_pc): Likewise. |
| * config/i386/nm-i386sol2.h (procfs_stopped_by_watchpoint) |
| (procfs_set_watchpoint): Likewise. |
| * config/i386/nm-linux.h (lin_lwp_attach_lwp): Likewise. |
| * config/i386/nm-ptx4.h (child_wait): Likewise. |
| * config/i386/nm-symmetry.h (child_wait): Likewise. |
| * config/i386/tm-cygwin.h (cygwin_pid_to_str): Likewise. |
| * config/ia64/nm-linux.h (ia64_linux_stopped_by_watchpoint) |
| (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint) |
| (lin_lwp_attach_lwp): Likewise. |
| * config/mips/nm-irix4.h, config/mips/nm-irix5.h |
| (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Likewise. |
| * config/pa/nm-hppah.h (child_pid_to_str, hppa_tid_to_str) |
| (hppa_pid_or_tid_to_str): Likewise. |
| * config/pa/tm-hppa.h (target_read_pc, target_write_pc): Likewise. |
| * config/powerpc/nm-linux.h (lin_lwp_attach_lwp): Likewise. |
| * config/sparc/nm-sun4sol2.h (procfs_stopped_by_watchpoint) |
| (procfs_set_watchpoint): Likewise. |
| |
| * gdbthread.h (thread_id_to_pid): Change return type which |
| represents a combined process/thread id from ``int'' to |
| ``ptid_t''. |
| * gnu-nat.c (gnu_wait): Likewise. |
| * go32-nat.c (go32_wait): Likewise. |
| * hpux-thread.c (hpux_thread_wait): Likewise. |
| * inferior.h (procfs_first_available): Likewise. |
| * inftarg.c (child_wait): Likewise. |
| * infttrace.c (ptrace_wait): Likewise. |
| * lin-lwp.c (lin_lwp_wait): Likewise. |
| * lin-thread.c (thread_db_wait): Likewise. |
| * linux-thread.c (linuxthreads_wait): Likewise. |
| * lynx-nat.c (child_wait): Likewise. |
| * m3-nat.c (mach_really_wait): Likewise. |
| * mac-nat.c (child_wait): Likewise. |
| * monitor.c (monitor_wait): Likewise. |
| * ppc-bdm.c (bdm_ppc_wait): Likewise. |
| * procfs.c (do_attach, procfs_wait, procfs_first_available): Likewise. |
| * remote-adapt.c (adapt_wait): Likewise. |
| * remote-array.c (array_wait): Likewise. |
| * remote-bug.c (bug_wait): Likewise. |
| * remote-e7000.c (e7000_wait): Likewise. |
| * remote-eb.c (eb_wait): Likewise. |
| * remote-es.c (es1800_wait): Likewise. |
| * remote-mips.c (mips_wait): Likewise. |
| * remote-mm.c (mm_wait): Likewise. |
| * remote-nindy.c (nindy_wait): Likewise. |
| * remote-os9k (rombug_wait): Likewise. |
| * remote-rdi.c (arm_rdi_wait): Likewise. |
| * remote-rdp.c (remote_rdp_wait): Likewise. |
| * remote-sds.c (sds_wait): Likewise. |
| * remote-sim.c (gdbsim_wait): Likewise. |
| * remote-st.c (st2000_wait): Likewise. |
| * remote-udi.c (udi_wait): Likewise. |
| * remote-vx.c (vx_wait): Likewise. |
| * remote.c (remote_wait, remote_async_wait, remote_current_thread) |
| (remote_cisco_wait): Likewise. |
| * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_wait): |
| Likewise. |
| * symm-nat.c (child_wait): Likewise. |
| * target.c (debug_to_wait): Likewise. |
| * target.h (to_wait [in struct target_ops]): Likewise. |
| * thread.c (thread_id_to_pid): Likewise. |
| * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait): |
| Likewise. |
| * top.c (*target_wait_hook): Likewise. |
| * uw-thread.c (lwp_to_thr, uw_thread_wait): Likewise. |
| * v850ice.c (v850ice_wait): Likewise. |
| * win32-nat.c (child_wait): Likewise. |
| * wince.c (child_wait): Likewise. |
| * config/nm-lynx.h (child_wait): Likewise. |
| * config/i386/nm-ptx4.h (child_wait): Likewise. |
| * config/i386/nm-symmetry.h (child_wait): Likewise. |
| |
| * arch-utils.c (generic_prepare_to_proceed): Rename wait_pid |
| to wait_ptid and change its type from ``int'' to ``ptid_t''. |
| * breakpoint.c (reattach_breakpoints, detach_breakpoints): Likewise, |
| but rename saved_inferior_pid to saved_inferior_ptid. |
| * d10v-tdep.c (d10v_read_pc, d10_write_pc): Likewise, but rename |
| save_pid to save_ptid. |
| * gdbthread.h (struct thread_info): Likewise, but rename pid to ptid. |
| * hppah-nat.c (child_pid_to_exec): Likewise, but rename |
| saved_inferior_pid to saved_inferior_ptid. |
| * hpux-thread.c (main_ptid): Likewise, but rename from main_pid. |
| * infrun.c (previous_inferior_pid [static global]): Likewise, |
| but rename to previous_inferior_ptid. |
| (resume): Likewise, but rename resume_pid to resume_ptid. |
| (struct execution_control_state): Likewise, but rename |
| pid to ptid, saved_inferior_pid to saved_inferior_ptid, |
| and waiton_pid to waiton_ptid. |
| (target_last_wait_pid): Likewise, but rename to |
| target_last_wait_ptid. |
| * infttrace.c (saved_real_pid): Likewise, but rename to |
| saved_real_ptid. |
| (child_pid_to_exec_file): Likewise, but rename saved_inferior_pid |
| to saved_inferior_ptid. |
| * lin-lwp.c (struct lwp_info): Likewise, but rename pid to ptid. |
| (trap_ptid): Likewise, but renamed from trap_pid. |
| * lin-thread.c (handle_new_thread): Likewise, but rename gdb_pid |
| to gdb_ptid. |
| * linux-thread.c (detach_thread): Likewise, but rename pid to ptid. |
| (thread_db_wait): Likewise, but rename ret_pid to retptid. |
| * procfs.c (procfs_wait): Likewise, for retval whose name |
| doesn't change. Also, ``temp'' becomes two separate variables, |
| one named temp_tid (an int) and the other temp_ptid. |
| (procfs_notice_thread): Likewise (type change) for gdb_threadid |
| whose name does not change. |
| * regcache.c (registers_ptid): Likewise, but renamed from |
| registers_pid. |
| (read_register_pid, read_signed_register_pid, write_register_pid): |
| Likewise, but rename save_pid to save_ptid. |
| (read_pc_pid, write_pc_pid): Likewise, but rename saved_inferior_pid |
| to saved_inferior_ptid. |
| * remote.c (remote_newthread_step): Likewise, but rename pid to ptid. |
| * sol-thread.c (struct ps_prochandle): Likewise. |
| (sol_thread_resume): Likewise, for save_pid which becomes save_ptid. |
| (sol_thread_wait): Likewise, for rtnval whose name does not |
| change, and for save_pid which becomes save_ptid. |
| (solaris_pid_to_str): Likewise for lwp whose name does not change. |
| (sol_find_new_threads_callback): Likewise, for pid which becomes |
| ptid. |
| * target.h (target_resume, target_wait, target_post_wait) |
| (target_post_startup_inferior, target_notice_signals) |
| (target_thread_alive): Likewise. |
| * thread.c (info_threads_command): Likewise, but rename |
| current_pid to current_ptid. |
| (struct current_thread_cleanup): Likewise, but rename field |
| inferior_pid to inferior_ptid. |
| * thread-db.c (find_new_threads_callback): Likewise, but rename |
| pid to ptid. |
| * uw-thread.c (thr_to_lwp): Likewise for lid whose name does not |
| change. |
| (lwp_to_tr): Likewise fo tid whose name remains unchanged. |
| (thr_infpid, lwp_infpid, notice_thread, libthread_stub): Likewise, |
| but rename pid to ptid. |
| * config/alpha/nm-linux.h (ATTACH_LWP): Likewise. |
| * config/arm/nm-linux.h (ATTACH_LWP): Likewise. |
| * config/i386/nm-linux.h (ATTACH_LWP): Likewise. |
| * config/ia64/nm-linux.h (ATTACH_LWP): Likewise. |
| * config/pa/nm-hppah.h (target_tid_to_str): Likewise. |
| * config/powerpc/nm-linux.h (ATTACH_LWP): Likewise. |
| |
| * arch-utils.c (generic_prepare_to_proceed): Test for the |
| "zero" ptid by using ptid_equal() to test to see if variable |
| in question is the same as null_ptid. This replaces a direct |
| test against zero. |
| * cxux-nat.c (add_shared_symbol_files): Likewise. |
| * i386aix-nat.c, i386b-nat.c (i386_float_info): Likewise. |
| * infcmd.c (run_command): Likewise. |
| * inflow.c (kill_command): Likewise. |
| * infttrace.c (call_ttrace): Likewise. |
| * lin-lwp.c (lin_lwp_prepare_to_proceed): Likewise. |
| * lin-thread.c (thread_db_kill): Likewise. |
| * procfs.c (procfs_kill_inferior, procfs_mourn_inferior): Likewise. |
| * remote-es.c (es1800_kill): Likewise. |
| * sol-thread.c (sol_thread_create_inferior): Likewise. |
| * solib.c (locate_base): Likewise. |
| * target.c (nosupport_runtime): Likewise. |
| * thread-db.c (thread_db_wait): Likewise. |
| * top.c (quit_confirm, quit_force): Likewise. |
| * uw-thread (lwp_infpid, uw_thread_resume): Likewise. |
| |
| * infrun.c (handle_inferior_event, stop_stepping, normal_stop): |
| Use ptid_equal to compare value of process/thread ids instead of |
| ``=='' and ``!='' operators. |
| lin-lwp.c (delete_lwp, lin_lwp_prepare_to_proceed) |
| (stop_wait_callback, lin_lwp_wait): Likewise. |
| * procfs.c (procfs_wait): Likewise. |
| * regcache.c (read_register_bytes, read_register_gen) |
| (write_register_gen, read_register, read_register_pid) |
| (read_signed_register, read_signed_register_pid, write_register) |
| (write_register_pid, supply_register): Likewise. |
| * remote-vx.c (vx_resume): Likewise. |
| * sol-thread.c (sol_thread_wait): Likewise. |
| * symm-nat.c (kill_inferior): Likewise. |
| * thread.c (delete_thread, find_thread_pid, pid_to_thread_id) |
| (in_thread_list, info_threads_command, switch_to_thread) |
| (restore_current_thread): Likewise. |
| * uw-thread (libtread_stub): Likewise. |
| |
| * arm-linux-nat.c (GET_THREAD_ID): Change PID to PTID. |
| |
| * corelow.c (add_to_thread_list): Convert argument in add_thread() |
| call to a ptid_t. |
| * gnu-nat.c (inf_validate_procs): Likewise. |
| * linux-thread.c (stop_thread, update_stop_threads): Likewise. |
| * remote.c (record_currthread, remote_threads_info): Likewise. |
| * win32-nat.c (child_add_thread): Likewise. |
| |
| * hpux-thread.c (save_inferior_pid, restore_inferior_pid): Rename, |
| respectively, to save_inferior_ptid() and restore_inferior_ptid(). |
| Adjust implementations to operate on ``ptid_t'' instead of ``int''. |
| * lin-lwp.c (save_inferior_pid, restore_inferior_pid): Likewise. |
| * lin-thread.c (save_inferior_pid, restore_inferior_pid): Likewise. |
| * linux-thread.c (save_inferior_pid, restore_inferior_pid): Likewise. |
| * proc-service.c (save_inferior_pid, restore_inferior_pid): Likewise. |
| * sol-thread.c (save_inferior_pid, restore_inferior_pid): Likewise. |
| * thread-db.c (save_inferior_pid, restore_inferior_pid): Likewise. |
| |
| * infrun.c (RESUME_ALL): New macro representing the -1 ptid |
| to be passed to target_resume() when all threads should resume. |
| (resume): Set resume_ptid to RESUME_ALL rather than -1. |
| (handle_inferior_event): Invoke target_resume() with RESUME_ALL |
| instead of -1. |
| * irix5-nat.c (solib_create_inferior_hook): Convert -1 to |
| a ptid_t in target_resume() call. |
| * osfsolib.c (solib_create_inferior_hook): Likewise. |
| * solib-svr4.c (solib_create_inferior_hook): Likewise. |
| |
| * lin-lwp.c (PIDGET, PIDGET0): Rename original PIDGET macro to |
| PIDGET0. Define new PIDGET macro which uses PIDGET0, the only |
| difference being that the 0xffff pattern will be interpreted |
| as -1. |
| * lin-thread.c (PIDGET, PIDGET0): Likewise. |
| * thread-db.c (PIDGET, PIDGET0): Likewise. |
| * config/nm-linux.h (PIDGET, PIDGET0): Likewise. |
| * config/i386/tm-i386sol2.h (PIDGET, PIDGET0): Likewise. |
| * config/i386/tm-i386v42mp.h (PIDGET, PIDGET0): Likewise. |
| * config/sparc/tm-sun4sol2.h (PIDGET, PIDGET0): Likewise. |
| |
| * m3-nat.c (init_m3_ops): Fix typo; initialize to_wait field to |
| mach_really_wait rather than mach_really__wait. |
| * lin-thread.c (check_for_thread_event): Fix warning; make function |
| actually return a value. |
| |
| * gdbarch.sh (TARGET_READ_PC, TARGET_WRITE_PC): Change type of |
| ``pid'' arguments from ``int'' to ``ptid_t''. Also renamed |
| pid to ptid. |
| * gdbarch.h, gdbarch.c: Regenerated. |
| |
| 2001-05-03 Jonathan Larmour <jlarmour@redhat.com> |
| |
| * rdi-share/devsw.c: Include <time.h> for struct tm |
| |
| 2001-05-03 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * config/djgpp/fnchange.lst: Add mappings for the new |
| opcodes/openrisc-* files. |
| |
| 2001-05-01 Michael Snyder <msnyder@redhat.com> |
| |
| * lin-lwp.c: Change printf to fprintf_unfiltered. |
| * Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o. |
| |
| 2001-05-01 Nicholas Duffek <nsd@redhat.com> |
| |
| * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define. |
| (rs6000_in_solib_return_trampoline): Declare. |
| * rs6000-tdep.c (rs6000_in_solib_return_trampoline): New |
| function. |
| (rs6000_skip_trampoline_code): Skip bigtoc fixup code. |
| * xcoffread.c (read_xcoff_symtab): Perform the ISFCN function |
| check after the CSECT check rather than before it. Allocate |
| separate symtabs for CSECTs whose names begin with '@'. |
| (scan_xcoff_symtab): Don't ignore symbols beginning with '@'. |
| Activate the misc_func_recorded mechanism for whose names begin |
| with '@'. |
| |
| 2001-04-30 J.T. Conklin <jtc@redback.com> |
| |
| * ppcnbsd-nat.c (fetch_inferior_registers) |
| (store_inferior_registers, fetch_core_registers): Changed to use |
| fpreg[] instead of r_regs[] to access floating point registers. |
| |
| 2001-04-30 Elena Zannoni <ezannoni@redhat.com> |
| |
| * sh-tdep.c: Get rid of the function prototypes. |
| (sh_sh4_build_float_register_type): Move earlier in file. |
| (fv_reg_base_num): Ditto. |
| (dr_reg_base_num): Ditto. |
| |
| 2001-04-30 Michael Snyder <msnyder@redhat.com> |
| |
| * thread-db.c: Revert 2001-04-26 change for debugging output. |
| * lin-lwp.c: Ditto. |
| * lin-lwp.c: Add set/show debug lin-lwp command. Use this |
| command to turn extra debugging output on / off. |
| |
| 2001-04-30 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ. |
| (top-level): #include filenames.h. |
| |
| * dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and |
| FILENAME_CMP, to DTRT on non-Posix platforms. |
| (top-level): #include filenames.h. |
| |
| |
| 2001-04-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbtypes.c (check_stub_method): Always initialize ``p''. |
| |
| 2001-04-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.host: Delete romp host. |
| * TODO: Update. |
| |
| 2001-04-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO: Updates to 5.1. No more targets to obsolete. |
| |
| 2001-04-27 Don Howard <dhoward@redhat.com> |
| |
| (Changes from Kevin Buettner, with minor update by Don Howard.) |
| |
| * i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix |
| typos in which hexadecimal constants were really intended to be |
| binary constants. |
| (i387_tag): Swap logic regarding zero vs non-zero exponents. |
| * MAINTAINERS (Misc): Added myself to the write-after-approval |
| list. |
| |
| 2001-04-26 Jim Blandy <jimb@redhat.com> |
| |
| (Changes from Daniel Berlin, with revisions by Jim Blandy.) |
| |
| Abstract out operations specific to particular C++ ABI's, and |
| invoke them through a function table. This removes the C++ ABI |
| dependencies scattered throughout the code, and allows us to |
| cleanly add support for new C++ ABI's. |
| * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files. |
| * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c, |
| jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c: |
| #include "cp-abi.h". These files all use functions now declared |
| there. |
| * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P): |
| Deleted. These services are now provided by functions declared in |
| cp-abi.h. |
| * value.h (value_rtti_type, value_virtual_fn_field): Same. |
| * values.c (value_virtual_fn_field): Same, for this definition. |
| * valops.c (value_rtti_type): Same. |
| * c-typeprint.c (c_type_print_base): Use the functions from |
| "cp-abi.h", instead of the old macros, or hard-coded ABI-specific |
| tests. |
| * dbxread.c (record_minimal_symbol): Same. |
| * gdbtypes.c (get_destructor_fn_field, virtual_base_index, |
| virtual_base_index_skip_primaries): Same. |
| * jv-typeprint.c (java_type_print_base): Same. |
| * linespec.c (find_methods, decode_line_1): Same. |
| * symtab.c (gdb_mangle_name): Same. |
| * Makefile.in (SFILES): Add the new .c files mentioned above. |
| (cp_abi_h): New variable. |
| (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o. |
| (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets. |
| (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o, |
| jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add |
| dependency on $(cp_abi_h). |
| |
| 2001-04-26 Michael Snyder <msnyder@redhat.com> |
| |
| * thread-db.c (_initialize_thread_db): Add set/show command |
| "debug-linux-threads" for debugging output. |
| * lin-lwp.c (various): Use global "debug_linux_threads to |
| turn on extra debugging output. |
| * lin-lwp.c: Minor cleanups in comments. |
| * target.c (normal_pid_to_str): Get rid of an ancient hack. |
| * remote.c (remote_pid_to_str): New function for remote target. |
| |
| 2001-04-24 Jim Blandy <jimb@redhat.com> |
| |
| * c-typeprint.c (c_type_print_cv_qualifier): Don't print `const' |
| qualifier on C++ references; all references are innately const. |
| |
| 2001-04-20 Mark Kettenis <kettenis@gnu.org> |
| |
| * event-top.h: Fix formatting. |
| |
| 2001-04-17 Andrew Cagney <ac131313@redhat.com> |
| |
| * source.c (openp): Obsolete #ifdef MPW code. |
| (open_source_file): Ditto. |
| * event-top.c (display_gdb_prompt): Ditto. |
| * utils.c (query): Ditto. |
| (init_page_info): Ditto. |
| (init_page_info): Delete #ifndef MPW. |
| * top.c (gdb_readline): Ditto. |
| * mac-xdep.c: Obsolete. |
| * mac-gdb.r: Obsolete. |
| * config/powerpc/xm-mpw.h: Obsolete. |
| * config/xm-mpw.h: Obsolete. |
| * mpw-make.sed: Obsolete. |
| * mpw-config.in: Obsolete. |
| * TODO: Update |
| * NEWS: Update |
| |
| 2001-04-19 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_frameless_function_invocation): New function. |
| * config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine |
| in terms of i386_frameless_function_invocation. Adjust comment. |
| (i386_frameless_function_invocation): New prototype. |
| |
| 2001-04-18 Martin M. Hunt <hunt@redhat.com> |
| |
| * top.c (gdb_init): Don't call cli_out_new() to |
| create global uiout if init_ui_hook is set. uiout will |
| have to be initialized there. |
| |
| 2001-04-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * arch-utils.c: Include "regcache.h". |
| |
| 2001-04-18 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_saved_pc_after_call): New function. |
| * config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms |
| of i386_saved_pc_after_call. |
| (i386_saved_pc_after_call): New prototype. |
| |
| 2001-04-17 Michael Snyder <msnyder@redhat.com> |
| |
| * i386-nat.c: Fix typo in comment. |
| * solib.c (no_shared_libraries): New function. Discard all symbols |
| from shared libraries. |
| (_initialize_solib): Add command "nosharedlibrary" as complement |
| to the command "sharedlibrary". Unloads symbols for all solibs. |
| |
| 2001-04-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.host (m68030-sony-*, m68*-isi-*, m68*-sony-*): |
| * configure.tgt (m68*-rom68k-*, m68*-*bug-*, m68*-monitor-*) |
| (m68*-est-*, m68*-sony-*, m68*-isi-*): |
| * Makefile.in (xm-news1000.h, tm-news.h, xm-news.h): Obsolete.. |
| * config/m68k/xm-news.h: Obsolete. |
| * config/m68k/tm-news.h: |
| * config/m68k/xm-news1000.h: Obsolete. |
| * config/m68k/news.mh: Obsolete. |
| * config/m68k/news.mt: Obsolete. |
| * config/m68k/nm-news.h: Obsolete. |
| * config/m68k/news1000.mh: Obsolete. |
| * news-xdep.c: Obsolete. |
| * Makefile.in (isi-xdep.o): Obsolete. |
| (ALLDEPFILES): Delete isi-xdep.c. |
| (tm-isi.h): Obsolete. |
| * m68k-tdep.c (altos_skip_prologue): Update comments. |
| (isi_skip_prologue): Obsolete. |
| * isi-xdep.c: Obsolete. |
| * config/m68k/xm-isi.h: Obsolete. |
| * config/m68k/isi.mh: Obsolete. |
| * config/m68k/tm-isi.h: Obsolete. |
| * config/m68k/isi.mt: Obsolete. |
| |
| * TODO: Update. |
| * NEWS: Update. |
| |
| 2001-04-17 Michael Snyder <msnyder@redhat.com> |
| |
| * remote.c (remote_open_1): On opening the remote target, activate |
| the solib_create_inferior_hook, so that it can detect when the |
| target loads shared libraries. |
| (remote_async_open_1): Ditto. |
| |
| 2001-04-17 Michael Snyder <msnyder@redhat.com> |
| |
| * breakpoint.c (print_one_breakpoint): Handle 64-bit addresses. |
| * tracepoint.c (tracepoints_info): Handle 64-bit addresses. |
| * testsuite/gdb.trace/deltrace.exp: Allow for 64-bit addresses. |
| * testsuite/gdb.trace/infotrace.exp: Ditto. |
| * testsuite/gdb.trace/passcount.exp: Ditto. |
| * testsuite/gdb.trace/while-stepping.exp: Ditto. |
| |
| 2001-04-17 Michael Snyder <msnyder@redhat.com> |
| |
| * thread-db.c (check_thread_signals): When looping over all |
| signals, ignore signal zero. |
| (disable_thread_signals): Ditto. |
| |
| 2001-04-17 Eirik Fuller <eirik@netapp.com> |
| |
| * thread.c (do_captured_thread_select): Allow the argument to the |
| thread command to be an expression rather than a literal integer. |
| |
| 2001-04-17 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use |
| read_memory_unsigned_integer instead of read_memory_integer. |
| |
| 2001-04-16 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c (map_index_vs_section_name_okay): New function. |
| (aix5_relocate_main_executable): Don't use file offsets for |
| determining corresponding sections and map file entries. Call |
| map_index_vs_section_name_okay() to do this instead. |
| |
| 2001-04-16 Kevin Buettner <kevinb@redhat.com> |
| |
| * procfs.c (open_with_retry): New function. |
| (open_procinfo_files, load_syscalls, proc_iterate_over_mappings) |
| (proc_get_LDT_entry): Call open_with_retry() instead of open(). |
| |
| 2001-04-16 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Adjust |
| comparison against TRAP_HWBKPT constant yet again to account |
| for the various values used by different kernel versions. |
| |
| 2001-04-16 Daniel Berlin <dan@cgsoftware.com> |
| |
| * demangle.c (_initialize_demangler): Use xcalloc on the |
| demangling_style_names, and make it a null terminated array of |
| names, to avoid a crash. |
| |
| 2001-04-16 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_frame_chain): New function. |
| * config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of |
| i386_frame_chain. |
| (i386_frame_chain): New prototype. |
| |
| 2001-04-14 J.T. Conklin <jtc@redback.com> |
| |
| * target.h (target_ops): Removed to_core_file_to_sym_file vector |
| function. |
| * corelow.c (core_ops): Updated for above change. |
| * gnu-nat.c (core_ops): Likewise. |
| * inftarg.c (child_ops): Likewise. |
| * monitor.c (monitor_ops): Likewise. |
| * ppc-bdm.c (bdm_ppc_ops): Likewise. |
| * remote-adapt.c (adapt_ops): Likewise. |
| * remote-bug.c (bug_ops): Likewise. |
| * remote-e7000.c (e7000_ops): Likewise. |
| * remote-eb.c (eb_ops): Likewise. |
| * remote-es.c (es1800_ops, es1800_child_ops): Likewise. |
| * remote-mm.c (mm_ops): Likewise. |
| * remote-nindy.c (nindy_ops): Likewise. |
| * remote-nrom.c (nrom_ops): Likewise. |
| * remote-os9k.c (rombug_ops): Likewise. |
| * remote-rdp.c (remote_rdp_ops): Likewise. |
| * remote-sim.c (gdbsim_ops): Likewise. |
| * remote-st.c (st2000_ops): Likewise. |
| * v850ice.c (v850ice_ops): Likewise. |
| * target.c (cleanup_target): Likewise |
| (update_current_target): Likewise. |
| (setup_target_debug): Likewise |
| (debug_to_core_file_to_sym_file): Removed. |
| |
| * corefile.c (core_file_command) [HPUXHPPA]: Removed code that |
| sets symbol file from information obtained from the core file. |
| * corelow.c (core_file_to_sym_file): Removed. |
| |
| 2001-04-13 Fernando Nasser <fnasser@redhat.com> |
| |
| From Adam Mirowski <Adam.Mirowski@Sun.COM> |
| Fixed Insight on Solaris. It was not possible to debug a process |
| because of EINTR "errors". |
| * procfs.c: (procfs_wait): if proc_wait_for_stop() fails |
| with EINTR, retry the call. |
| |
| 2001-04-12 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c (enum maptype): Delete. |
| (struct lm_info): Add new member ``nmappings''. Make ``mapping'' |
| member a pointer instead of a statically sized array. |
| (build_so_list_from_mapfile): Dynamically allocate ``mapping'' |
| array. |
| (aix5_relocate_main_executable, aix5_relocate_section_addresses, |
| aix5_find_global_pointer): Search for correct mapping to use |
| based on file offset instead of knowledge of whether the section |
| is read-only or read/write. |
| (aix5_find_gate_addresses): Use the first mapping instead of |
| the (now defunct) MT_READONLY mapping. |
| |
| 2001-04-12 Nicholas Duffek <nsd@redhat.com> |
| |
| * xcoffread.c (scan_xcoff_symtab): Ignore symbols beginning with |
| "@". |
| |
| 2001-04-12 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/i386/fbsd.mh (NATDEPFILES): Add i386-nat.o. |
| |
| 2001-04-09 Andrew Cagney <ac131313@redhat.com> |
| |
| Obsolete i[3456]86-*-sunos* (aka Sun386) host and target. |
| * config/i386/sun386.mh: Obsolete. |
| * config/i386/sun386.mt: Obsolete. |
| * config/i386/xm-sun386.h: Obsolete. |
| * config/i386/tm-sun386.h: Obsolete. |
| * config/i386/nm-sun386.h: Obsolete. |
| * Makefile.in (ALLDEPFILES): Delete sun386-nat.c. |
| (sun386-nat.o): Target is obsolete. |
| * sun386-nat.c: Obsolete. |
| * configure.tgt (i[3456]86-*-sunos*): Obsolete. |
| * configure.host (i[3456]86-*-sunos*): Obsolete. |
| * NEWS: Update. |
| * TODO: Update. |
| |
| 2001-04-10 J.T. Conklin <jtc@redback.com> |
| |
| * maint.c: Fix typo in comment. |
| |
| 2001-04-09 Keith Seitz <keiths@cygnus.com> |
| |
| * MAINTAINERS: Swap with Syd Polk as a gdbtk maintainer. |
| |
| 2001-04-08 Kevin Buettner <kevinb@redhat.com> |
| |
| * fork-child.c (fork_inferior, clone_and_follow_inferior): |
| Document fact that apparent call to vfork() might actually be |
| a call to fork() instead. |
| * ser-pipe.c (pipe_open): Likewise. |
| |
| 2001-04-08 Kevin Buettner <kevinb@redhat.com> |
| |
| * printcmd.c (print_frame_args): Use a cleanup to invoke |
| ui_out_list_end() so that the list count nesting flag will |
| be decremented properly when an error occurs. |
| * stack.c (print_frame): Likewise. |
| |
| 2001-04-06 J.T. Conklin <jtc@redback.com> |
| |
| * dcache.c (dcache_write_line): Fixed bugs where cache line was |
| not written to target correctly. |
| |
| * gdbserver/low-hppabsd.c (read_inferior_memory): Add explicit |
| void return value; |
| * gdbserver/low-nbsd.c: Likewise. |
| * gdbserver/low-sparc.c: Likewise. |
| * gdbserver/low-sun3.c: Likewise. |
| |
| 2001-04-06 Geoffrey Keating <geoffk@redhat.com> |
| |
| * config/rs6000/nm-rs6000.h (PTRACE_ATTACH): Don't define. |
| (PTRACE_DETACH): Don't define. |
| |
| 2001-04-06 David Smith <dsmith@redhat.com> |
| |
| * arch-utils.c (default_prepare_to_proceed) |
| (generic_prepare_to_proceed): Added new functions. |
| * arch-utils.h: New function declarations for |
| default_prepare_to_proceed() and generic_prepare_to_proceed(). |
| * gdbarch.sh: Added PREPARE_TO_PROCEED. |
| * gdbarch.c: Regenerated. |
| * gdbarch.h: Regenerated. |
| * inferior.h: Added get_last_target_status() declaration. |
| * infrun.c (get_last_target_status): Added new function. |
| (handle_inferior_event): Saves last pid and waitstatus, which will |
| get returned by get_last_target_status(). |
| |
| * hppa-tdep.c (prepare_to_proceed): Added comment stating that |
| prepare_to_proceed() is potentially redundant since |
| default_prepare_to_proceed() has been added. |
| * linux-thread.c (prepare_to_proceed): Ditto. |
| * lin-lwp.c (prepare_to_proceed): Ditto. |
| * m3-nat.c (prepare_to_proceed): Ditto. |
| |
| 2001-04-05 Andrew Cagney <ac131313@redhat.com> |
| |
| Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms |
| and powerpc-*-netware* target. |
| * configure.host (powerpcle-*-cygwin*, powerpcle-*-solaris*): |
| Obsolete. |
| * configure.tgt (powerpc-*-netware*, powerpcle-*-cygwin*) |
| (powerpcle-*-solaris*): Obsolete. |
| * config/powerpc/tm-cygwin.h: Obsolete. |
| * config/powerpc/cygwin.mt: Obsolete. |
| * config/powerpc/xm-cygwin.h: Obsolete. |
| * config/powerpc/cygwin.mh: Obsolete. |
| * config/powerpc/nm-solaris.h: Obsolete. |
| * config/powerpc/xm-solaris.h: Obsolete. |
| * config/powerpc/tm-solaris.h: Obsolete. |
| * config/powerpc/solaris.mt: Obsolete. |
| * config/powerpc/tm-ppc-nw.h: Obsolete. |
| * config/powerpc/ppc-nw.mt: Obsolete. |
| * TODO: Update. |
| * NEWS: Update. |
| |
| 2001-04-06 Fernando Nasser <fnasser@redhat.com> |
| |
| * buildsym.c (record_line): Turn off unused addr bits. |
| |
| 2001-04-06 Fernando Nasser <fnasser@redhat.com> |
| |
| From David Deephanphongs <deephan@telocity.com> |
| * inferior.h: Fix declarations of get_inferior_args and |
| set_inferior_args, which were missing the trailing 's'. |
| |
| 2001-04-05 Jeff Holcomb <jeffh@redhat.com> |
| |
| * monitor.c (monitor_supply_register): Only report an error if we |
| don't get a valid value. |
| |
| 2001-04-05 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * README: Don't mention gdba.el. |
| |
| 2001-04-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| From Jimmy Guo <guo@cup.hp.com> |
| * top.c (init_main): set prompt if annotation_level>1, |
| this is necessary when annotation_level is set to 2 via |
| --annotate=2 command line option. |
| |
| 2001-04-04 Andrew Cagney <ac131313@redhat.com> |
| |
| Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets. |
| * configure.tgt (a29k-*-sym1*, a29k-*-kern*): Obsolete. |
| * configure.host (a29k-*-*): Obsolete. |
| * Makefile.in (ALLDEPFILES): Remove ultra3-nat.c and |
| ultra3-xdep.c. |
| (ultra3-nat.o, ultra3-xdep.o): Obsolete. |
| * config/a29k/tm-ultra3.h: Obsolete. |
| * config/a29k/ultra3.mt: Obsolete. |
| * config/a29k/ultra3.mh: Obsolete. |
| * config/a29k/nm-ultra3.h: Obsolete. |
| * config/a29k/xm-ultra3.h: Obsolete. |
| * ultra3-xdep.c: Obsolete. |
| * ultra3-nat.c: Obsolete. |
| * config/a29k/a29k-kern.mt: Obsolete. |
| * NEWS: Update. |
| * TODO: Update. |
| |
| Wed Apr 4 21:48:42 2001 Christopher Faylor <cgf@cygnus.com> |
| |
| * main.c: Remove windows.h use. |
| (gdbtk_test): Use PATH_MAX for home var calculation. |
| * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as |
| Win32 in colon test. |
| * ser-tcp.c: Use modern __CYGWIN__ conditional. |
| * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test. |
| (openp): Ditto. |
| * symfile.c (symfile_bfd_open): Ditto. |
| |
| 2001-04-04 Martin M. Hunt <hunt@redhat.com> |
| |
| * main.c (captured_main): For GDBtk, don't use tui_fileopen(). |
| Handle all stream setup in gdbtk_init |
| |
| 2001-04-04 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_extract_return_value): Don't return the return |
| value of a void function. |
| (i386_store_return_value): Likewise. |
| |
| 2001-04-03 Andrew Cagney <ac131313@redhat.com> |
| |
| Obsolete w65-*-* target. |
| * configure.tgt (w65-*-*): Obsolete. |
| * config/w65/w65.mt: Obsolete. |
| * config/w65/tm-w65.h: Obsolete. |
| * w65-tdep.c: Obsolete. |
| * NEWS: Update. Fix TiC80 description. |
| * TODO: Update. |
| |
| 2001-04-03 Andrew Cagney <ac131313@redhat.com> |
| |
| Obsolete tic80-*-* target. |
| * configure.tgt (tic80-*-*): Obsolete. |
| * config/tic80/tic80.mt: Obsolete. |
| * config/tic80/tm-tic80.h: Obsolete. |
| * tic80-tdep.c: Obsolete. |
| * TODO: Update |
| * NEWS: Update. |
| |
| 2001-04-02 J.T. Conklin <jtc@redback.com> |
| |
| * remote-mips.c (S_IROTH): Moved definition from here. |
| * gdb_stat.h (S_IROTH): to here. |
| |
| * remote.c (remote_protocol_e, remote_protocol_E): Define. |
| (set_remote_protocol_e_packet_cmd) |
| (set_remote_protocol_E_packet_cmd) |
| (show_remote_protocol_e_packet_command) |
| (show_remote_protocol_E_packet_command): New functions. |
| (init_all_packet_configs): Initialize remote_protocol_e and |
| remote_protocol_E. |
| (remote_resume, remote_async_resume): Support e/E command |
| packets. |
| (show_remote_cmd): Show state of remote_protocol_e and |
| remote_protocol_E. |
| (_initialize_remote): Add "set remote step-over-range-packet" |
| and "set remote step-over-range-w-signal-packet" to CLI. |
| |
| 2001-04-01 Andrew Cagney <ac131313@redhat.com> |
| |
| Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and |
| ns32k-utek-*. |
| * Makefile.in (ALLDEPFILES): Delete umax-xdep.c and ns32km3-nat.c. |
| (umax-xdep.o, ns32km3-nat.o): Obsolete. |
| * configure.tgt (ns32k-*-mach3*, ns32k-utek-sysv*, ns32k-utek-*): |
| Obsolete. |
| * configure.host (ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*): |
| Obsolete. |
| * config/ns32k/merlin.mh: Obsolete. |
| * config/ns32k/merlin.mt: Obsolete. |
| * config/ns32k/xm-merlin.h: Obsolete. |
| * config/ns32k/tm-merlin.h: Obsolete. |
| * config/ns32k/nm-umax.h: Obsolete. |
| * config/ns32k/umax.mh: Obsolete. |
| * config/ns32k/umax.mt: Obsolete. |
| * config/ns32k/xm-umax.h: Obsolete. |
| * umax-xdep.c: Obsolete. |
| * config/ns32k/ns32km3.mh: Obsolete. |
| * config/ns32k/ns32km3.mt: Obsolete. |
| * config/ns32k/tm-ns32km3.h: Obsolete. |
| * config/ns32k/xm-ns32km3.h: Obsolete. |
| * ns32km3-nat.c: Obsolete. |
| * ns32k-tdep.c (merlin_skip_prologue): Obsolete. |
| (merlin_frame_num_args): Ditto. |
| * NEWS: Update. |
| * TODO: Update. |
| |
| 2001-04-02 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * config/djgpp/fnchange.lst: Tweak due to |
| expect/example/chesslib.c. |
| |
| 2001-04-02 Kevin Buettner <kevinb@redhat.com> |
| |
| * m88k-tdep.c (examine_prologue): Change type of ``insn'' from |
| unsigned int to unsigned long. Also, fix format string. |
| (pop_frame): Fix PC_IN_CALL_DUMMY() call so that it doesn't |
| use an undeclared variable. Also, delete declaration and |
| initialization of ``fp'' because it is otherwise unused. |
| * remote-bug.c (sleep): Delete declaration. |
| (bug_store_register, bug_write_memory, bug_read_memory) |
| (bug_insert_breakpoint, bug_remove_breakpoint): Fix sprintf() |
| format statements and cast certain sprintf() arguments to |
| eliminate warnings. |
| (bug_load): Likewise for call to printf_filtered(). |
| * config/m88k/tm-m88k.h (FIX_CALL_DUMMY): Eliminate |
| assignment to ``pc''. The necessary assignment is done in |
| hand_function_call() after the invocation of FIX_CALL_DUMMY(). |
| |
| 2001-03-20 Daniel Berlin <dberlin@redhat.com> |
| |
| * symtab.c (completion_list_add_name): Remove duplicate string checks, |
| readline already does this, and it's much faster at it, too. |
| |
| 2001-04-01 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * go32-nat.c: Minor tweaks, to pacify the ari script. |
| |
| 2001-04-01 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c (i386_extract_struct_value_address): New function. |
| * config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine |
| in terms of i386_extract_struct_value_address. |
| (i386_extract_struct_value_address): New prototype. |
| |
| * i386-linux-nat.c (i386_linux_dr_get): Change type of return |
| value to `unsigned long'. Change type of `value' to `unsigned |
| long'. |
| (i386_linux_dr_set): Change type of second argument to `unsigned |
| long'. |
| (i386_linux_dr_set_control): Change type of first argument to |
| `unsigned long'. |
| (i386_linux_dr_get_status): Change type of return value to |
| unsigned long. |
| * config/i386/nm-linux.h (i386_linux_dr_set_control, |
| i386_linux_dr_get_status): Adjust prototypes accordingly. |
| |
| 2001-03-31 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Change |
| TRAP_HWBKPT constant to match that in the kernel headers for |
| Linux/IA-64. |
| |
| 2001-03-31 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386bsd-nat.c: Include "gdb_assert.h". |
| [HAVE_PT_GETDBREGS] (DBREG_DRX): Define if not |
| already defined. |
| [HAVE_PT_GETDBREGS] (i386bsd_dr_set, i386bsd_dr_set_control, |
| i386bsd_dr_set_addr, i386bsd_dr_reset_addr, |
| i386bsd_dr_get_status): New functions. |
| * config/i386/nm-fbsd.h [HAVE_PT_GETDBREGS] |
| (I386_USE_GENERIC_WATCHPOINTS): Define. |
| Include "i386/nm-i386.h". |
| (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR, |
| I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros. |
| (i386bsd_dr_set_control, i386bsd_dr_set_addr, |
| i386bsd_dr_reset_addr, i386bsd_dr_get_status): New prototypes. |
| * acconfig.h (HAVE_PT_GETDBREGS): New configure macro. |
| * configure.in: Cleanup a few comments. Check for PT_GETDBREGS |
| ptrace request. |
| * config.in, configure: Regenerate. |
| |
| * i386-nat.c (i386_insert_aligned_watchpoint): Set address |
| register before enabling it by setting the control register. |
| (i386_remove_aligned_watchpoint): Reset address register after |
| disabling it by setting the control register. |
| |
| * i386-tdep.c (i386_extract_return_value): If the type of the |
| return value is TYPE_STRUCT and the number of fields is one, call |
| ourselves with TYPE set tp the type of the first field. |
| (i386_store_return_value): Likewise. |
| This fixes a problem with returning structs consisting of a single |
| `float' or `double' on *BSD. |
| |
| 2001-03-30 Mark Kettenis <kettenis@gnu.org> |
| |
| * lin-lwp.c (lin_lwp_resume): Don't mark LWP as not stopped until |
| we're absolutely sure we're going to resume it. |
| |
| * thread-db.c (check_event): Don't report an error if we encounter |
| a thread creation event for a thread that's already in the thread |
| list, since that may legitemately happen. Instead only call |
| attach_thread if it's not already in the thread list. |
| |
| 2001-03-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/pa/xm-hppah.h (malloc): Really delete declaration |
| (MALLOC_INCOMPATIBLE): Really delete macro. |
| * cli/cli-cmds.c (apropos_command): Use xcalloc. |
| |
| 2001-03-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.in (build_warnings): Add -Wuninitialized. |
| * configure: Regenerate. |
| |
| * v850-tdep.c (v850_scan_prologue): Initialize ``insn2''. |
| * sparc-tdep.c (sparc64_push_arguments): Add default case to |
| switch. |
| * sh-tdep.c (sh_do_fp_register): Replace ``?:'' printf format |
| expression with if statement. |
| * mn10200-tdep.c (mn10200_analyze_prologue): Initialize |
| ``stack_size''. |
| * mips-tdep.c (show_mipsfpu_command): Add default case to switch. |
| (mips_dump_tdep): Fix setting of ef_mips_arch. |
| * mcore-tdep.c (mcore_analyze_prologue): Initialize ``fp_regnum''. |
| * dsrec.c (make_srec): Always initialize ``binbuf''. |
| * monitor.c (monitor_read_memory_single): Do not pass an |
| uninitialized buffer to monitor_error. Make ``i'' more local. |
| |
| 2001-03-28 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Change ns32k target to ,-Werror. |
| |
| * ns32k-tdep.c: Include "gdbcore.h" |
| (flip_bytes): Change first argument to void*. Add forward |
| declaration. |
| (sign_extend): Add declaration. |
| (merlin_frame_num_args): Add final else clause to if-else chain. |
| (umax_frame_num_args): Ditto. |
| * config/ns32k/tm-umax.h (ns32k_localcount): Declare. |
| (flip_bytes): Ditto. |
| |
| 2001-03-28 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-linux-tdep.c (FRAMELESS_SIGNAL): Moved here from |
| config/i386/nm-linux.h (including comment). |
| (i386_linux_frame_chain): New function implementing guts of the |
| former FRAME_CHAIN macro, but using read_memory_unsigned_integer |
| instead of read_memory_integer. |
| (i386_linux_frame_saved_pc): Removed doc pointing to |
| i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that |
| now lives in this file. |
| * config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to |
| i386-linux-tdep.c (including comment). |
| (FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain. |
| (i386_linux_frame_chain): New prototype. |
| |
| * gdbserver/low-linux.c [I386_GNULINUX_TARGET]: Cleanup code and |
| make it work again. |
| (NUM_FREGS): Redefine to 0. |
| (NUM_REGS): Redefine as NUM_GREGS. |
| (i386_register_byte, i386_register_raw_size): Update from |
| i386-tdep.c. Add comment about their origin. |
| (regmap, register_u_addr): Take these from i386-linux-nat.c. |
| (i386_register_u_addr): Removed. |
| |
| * i386-linux-nat.c (i386_linux_dr_get): Return 0 if ptrace call |
| fails instead of calling perror_with_name. This should fix |
| debugging remote i386 targets with a native Linux/x86 GDB. Add |
| FIXME for this hack. |
| |
| 2001-03-19 J.T. Conklin <jtc@redback.com> |
| |
| * arch-utils.c (#include "gdbthread.h"): Removed. |
| (#include "symfile.h"): Removed. |
| (XMALLOC): Removed unused macro. |
| * breakpoint.c (tbreak_command): Removed local declaration. |
| (awatch_command, do_enable_breakpoint, set_breakpoint_count): |
| Remove duplicate declarations. |
| (bpstat_should_step, bpstat_have_active_hw_watchpoints) |
| (remove_solib_event_breakpoints): Fix indentation botch. |
| * c-typeprint.c (#include "command.h"): Removed. |
| (#include "gdbcmd.h"): Removed. |
| * ch-exp.c (ch_terminal_match_float_literal, parse_expr) |
| (parse_primval, parse_untyped_expr, parse_opt_untyped_expr): |
| Removed duplicate declarations. |
| * ch-typeprint.c (#include "command.h"): Removed. |
| (#include "gdbcmd.h"): Removed. |
| * corefile.c (#include "frame.h"): Removed |
| (#include "symfile.h"): Removed. |
| (#include "language.h"): Removed. |
| * dbxread.c (#include "command.h"): Removed. |
| * environ.c (#include "gdbcore.h"): Removed. |
| * event-loop.c (#include "top.h"): Removed. |
| * f-typeprint.c (#include "command.h"): Removed. |
| (#include "gdbcmd.h"): Removed. |
| (#include "language.h"): Removed. |
| (#include "typeprint.h"): Removed. |
| (#include "frame.h"): Removed. |
| * gdbtypes.h (print_type_scalar): Removed declaration. |
| * infcmd.c (#include "completer.h"): Removed. |
| * language.c (#include "frame.h"): Removed. |
| * m2-typeprint.c (#include "command.h"): Removed. |
| (#include "gdbcmd.h"): Removed. |
| (#include "language.h"): Removed. |
| * m2-valprint.c (#include "valprint.h"): Removed. |
| * p-typeprint.c (#include "command.h"): Removed. |
| (#include "gdbcmd.h"): Removed. |
| * p-valprint.c (#include "typeprint.h"): Removed. |
| * parse.c (#include "linespec.h"): Removed. |
| * regcache.c (#include "frame.h"): Removed. |
| * remote.c (#include "frame.h"): Removed. |
| (getpkt_sane): Make static. |
| * source.c (#include "completer.h"): Removed. |
| * stack.c (#include "symfile.h"): Removed. |
| (#include "objfiles.h"): Removed. |
| * symfile.c (#include "completer.h"): Removed. |
| * tracepoint.c (#include "completer.h"): Removed. |
| * values.c (#include "frame.h"): Removed. |
| * varobj.c (#include "valprint.h"): Removed. |
| * wrapper.c (#include "frame.h"): Removed. |
| |
| * memattr.c (create_mem_region): Removed unused variable. |
| * remote-nrom.c: Removed spurious semicolon after init_nrom_ops. |
| |
| 2001-03-27 Nick Clifton <nickc@redhat.com> |
| |
| * remote-rdp.c (rdp_set_command_line): Add missing double quote. |
| |
| 2001-03-27 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c (build_so_lib_from_mapfile): Use xfree() instead |
| of free(). |
| |
| 2001-03-27 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * TODO (Cleanups): Remove the item about converting docs to GFDL. |
| |
| 2001-03-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-tdep.c (slotN_contents, replace_slotN_contents): Change |
| type of ``bundle'' from unsigned char * to char *. |
| (ia64_get_saved_register): Use alloca() to allocate register |
| buffers. |
| |
| * solib-aix5.c (build_so_lib_from_mapfile): Fix xasprintf() usage. |
| |
| 2001-03-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * proc-utils.h (procfs_ctl_t): New typedef. |
| * proc-api.c (write_with_trace): Change type of ``opcode'' from |
| long to procfs_ctl_t. Don't assume that the target has defined |
| BREAKPOINT. Handle case in which PCRESET is the same as PCUNSET. |
| * proc-events.c (sys/syscall.h, sys/fault.h): Include conditionally. |
| * procfs.c (sys/fault.h, sys/syscall.h): Include conditionally. |
| (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t, gdb_premptysysset) |
| (gdb_praddsysset, gdb_prdelsysset, gdb_pr_issyssetmember): |
| Conditionally define as appropriate for AIX/non-AIX systems. Use |
| these defines/typedefs as appropriate elsewhere in file. |
| (struct procinfo): Change type of saved_sigset and saved_sighold |
| from sigset_t to gdb_sigset_t. Make saved_exitset and |
| saved_entryset pointer variables. Add two new fields, num_syscalls |
| and syscall_names. |
| (DYNAMIC_SYSCALLS): Define when HAVE_PRSYSENT_T is defined. |
| (sysset_t_size, sysset_t_alloc): New functions. |
| (load_syscalls, free_syscalls, find_syscall): New functions for |
| platforms which define DYNAMIC_SYSCALLS. |
| (create_procinfo): Call load_syscalls. |
| (destroy_one_procinfo): Call free_syscalls. |
| (GDBRESET): Don't define twice. |
| (proc_modify_flag): Change type of operation code array `arg' |
| from long to procfs_ctl_t. |
| (proc_stop_process, proc_wait_for_stop, proc_run_process) |
| (proc_set_traced_signals, proc_set_traced_faults) |
| (proc_set_traced_sysentry, proc_set_traced_sysexit) |
| (proc_set_held_signals, proc_clear_current_fault) |
| (proc_set_current_signal, proc_clear_current_signal, proc_set_gregs) |
| (proc_set_fpregs, proc_kill, proc_set_watchpoint): Likewise for `cmd'. |
| (proc_set_traced_sysentry): Dynamically allocate variable sized |
| struct gdb_proc_ctl_pcsentry. Also, free it at function exit. |
| (proc_set_traced_sysexit): Dynamically allocate variable |
| sized struct gdb_proc_ctl_pcsexit. Also, free it at |
| function exit. |
| (proc_get_traced_sysentry, proc_get_traced_sysexit): Add new code |
| for reading the sysset_t struct on AIX5. |
| (procfs_debug_inferior): Don't assume that SYS_exit will be |
| defined. Add new code for finding certain syscalls on AIX5. |
| (syscall_is_lwp_exit, syscall_is_exit, syscall_is_exec) |
| (syscall_is_lwp_create): New functions. |
| (procfs_wait): Restructured code which checks for certain |
| system calls to use the new syscall_is_... functions. |
| (procfs_notice_signals): Account for the fact that saved_entryset |
| and saved_exitset in struct procinfo are now pointers. |
| |
| 2001-03-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * symtab.c (find_pc_sect_line): Revise method used for finding |
| the ending pc. |
| |
| 2001-03-26 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-linux-tdep.c (i386_linux_sigtramp_saved_pc, |
| i386_linux_sigtramp_saved_sp): Make static. |
| (i386_linux_frame_saved_pc): New function based on the old |
| FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead |
| of read_memory_integer. |
| * config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition. |
| (i386_linux_sigtramp_saved_pc): Remove prototype. |
| (FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc. |
| (i386_linux_frame_saved_pc): New prototype. |
| |
| 2001-03-26 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Document m88k as a ``Known problem in 5.1''. |
| * TODO (GDB 5.1 - Cleanups): Update. |
| |
| 2001-03-26 Andrew Cagney <ac131313@redhat.com> |
| |
| * fork-child.c (clone_and_follow_inferior): Delete #ifdef |
| HAVE_VFORK. |
| |
| 2001-03-26 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/i386/tm-symmetry.h (PUSH_ARGUMENTS): #undef. |
| |
| * i386-tdep.c (i386_push_arguments, i386_store_struct_return): New |
| functions. |
| * config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro. |
| (STORE_STRUCT_RETURN): Redefine in terms of |
| i386_store_struct_return. |
| (i386_push_arguments, i386_store_struct_return): New prototypes. |
| * config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's |
| definition was identical to the definition in "i386/tm-i386.h" so |
| the new definition should suffice too. |
| |
| 2001-03-26 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * event-loop.c (toplevel) [!HAVE_POLL] [NO_FD_SET]: Remove unused |
| definitions for SELECT, NBBY, FD_SETSIZE, NFDBITS, and MASK_SIZE. |
| |
| * config/djgpp/djconfig.sh: Add copyright notice. |
| |
| * ser-go32.c (rawclock): Remove prototype; include time.h instead. |
| (ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C. |
| (top level) <string.h>: Include gdb_string.h instead. |
| (dos_noop, dos_raw, dos_noflush_set_tty_state) |
| (dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED. |
| |
| * go32-nat.c (go32_create_inferior): Move the declaration of |
| `environ' to here from the top level. |
| (top level) <_initialize_go32_nat>: Remove redundant prototype. |
| <gdb_string.h>: Include it instead of string.h. |
| (store_register): Call register_buffer instead of accessing |
| registers[] directly. |
| (redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger) |
| (redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put |
| the function names at the start of the line. |
| (go32_set_dr): Throw internal_error if the argument is not a valid |
| debug register number. |
| (go32_open, go32_close, go32_attach, go32_detach, go32_resume) |
| (go32_wait, go32_xfer_memory, go32_files_info) |
| (go32_terminal_info): Remove ATTRIBUTE_UNUSED. |
| |
| 2001-03-25 Jim Blandy <jimb@redhat.com> |
| |
| * mips-tdep.c (mips_gdbarch_init): Tweak indentation. |
| |
| 2001-03-25 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| From Andrew Cagney <ac131313@redhat.com> |
| |
| * coffread.c: Include "gdb_assert.h". |
| (coff_symtab_read): Cast the integer s_sclass to a long before |
| casting it to a pointer. |
| |
| 2001-03-25 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| From Andrew Cagney <ac131313@redhat.com> |
| |
| * coffread.c (coff_symtab_read): Initialize |
| ``fcn_first_line_addr''. Check that the ``.bf'' always preceeds |
| the ``.ef'' info. |
| * dbxread.c (find_text_range): Initialize ``start'' and ``end''. |
| |
| 2001-03-23 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/sparc/tm-sp64.h (GDB_MULTI_ARCH): Down grade to |
| GDB_MULTI_ARCH_PARTIAL from two. SOFTWARE_SINGLE_STEP is not |
| multi-arch. |
| |
| * gdbarch.sh (SOFTWARE_SINGLE_STEP): Add. |
| * gdbarch.h, gdbarch.c: Re-generate. |
| |
| * target.h (SOFTWARE_SINGLE_STEP_P) |
| (SOFTWARE_SINGLE_STEP): Delete macro definitions. |
| |
| 2001-03-23 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh (gdbarch_register_read, gdbarch_register_write): Add. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| |
| * regcache.h (regcache_read, regcache_write): Declare. |
| (registers, register_valid, register_buffer): Add note that these |
| interfaces are deprecated. |
| |
| * regcache.c: Include "gdb_assert.h". |
| (legacy_write_register_gen): Rename write_register_gen. |
| (legacy_read_register_gen): Rename read_register_gen. |
| (regcache_read, regcache_write): New function. |
| (read_register_gen, write_register_gen): New function. |
| (write_register): Simplify. Use write_register_gen. |
| (read_register): Ditto using read_register_gen. |
| (read_signed_register): Ditto. |
| (read_register_bytes): Ditto!!!! |
| (supply_register): Add note that CLEANUP_REGISTER_VALUE is being |
| replaced by gdbarch_register_read. |
| |
| * TODO (GDB 5.2 - Cleanups): Add list of gdbarch methods to |
| deprecate. |
| |
| 2001-03-23 Jim Blandy <jimb@redhat.com> |
| |
| Fix from Dan Berlin: |
| |
| * stabsread.c (read_cpp_abbrev): Properly construct the names of |
| virtual function table pointer fields. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * defs.h (xfree, mcalloc, mmalloc, mrealloc, mfree, xmmalloc, |
| xmrealloc): Move existing declarations to the one place and |
| re-order to be consistent. |
| (xmcalloc, xmfree): Declare. |
| (xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in |
| declaration. |
| |
| * utils.c (size_t): Delete #ifdef defining size_t. |
| (mmalloc, mrealloc, mcalloc, mfree): Re-order. |
| (mmalloc, mrealloc, mcalloc): Document as only calls in GDB |
| corresponding malloc, realloc, calloc. |
| (mfree): Call free directly. |
| (xmmalloc, xmrealloc): Clean up. Assume ISO-C. |
| (xmcalloc, xmfree): New functions. Copy old xcalloc and xfree |
| function bodies to here. |
| (xcalloc, xfree): Call xmcalloc and xmfree respectfully. |
| |
| 2001-03-23 Andrew Cagney <ac131313@redhat.com> |
| |
| * fork-child.c (fork_inferior): Make ``argv'', ``exec_file'' and |
| ``shell_file'' static locals. |
| |
| * jv-lang.c (java_link_class_type): Initialize ``field'' and |
| ``method''. |
| |
| * jv-valprint.c (java_value_print): Initialize ``next_element''. |
| |
| 2001-03-23 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/i386/nm-i386.h: Fix formatting and change reference to |
| i386-tdep.c to i386-nat.c. |
| |
| 2001-03-23 David Smith <dsmith@redhat.com> |
| |
| * configure.in: Corrected spelling errors. |
| * configure: Regenerated. |
| |
| 2001-03-22 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (GDB 5.1 - Cleanups): Add more targets to obsolete. |
| |
| 2001-03-22 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (NTSSTART): Delete. |
| (NTSOBS): Delete. |
| (kdb): Delete target. |
| * kdb-start.c, stuff.c: Mark as obsolete. |
| * NEWS: Update. |
| |
| 2001-03-22 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/pa/xm-hppah.h (HPPA_COMPILER_BUG): Delete. GDB only |
| compiles using an ISO-C compiler. |
| (MALLOC_INCOMPATIBLE): Ditto. |
| * linespec.c (decode_line_1): Delete hack to work around |
| HPPA_COMPILER_BUG. |
| |
| 2001-03-22 Andrew Cagney <ac131313@redhat.com> |
| |
| * exec.c (xfer_memory): Always initialize section. |
| * infrun.c (normal_stop): Always initialize source_flag. |
| |
| 2001-03-22 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (Remote Protocol Support): Review. Add notes about ``!'', |
| non-use of a continue address and typical use of ``q'' packet. |
| |
| 2001-03-22 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| Make DJGPP use the new unified support for hardware |
| breakpoints and watchpoints on x86 targets: |
| |
| * config/i386/nm-go32.h <top level>: Don't include nm-i386v.h, |
| include nm-i386.h instead. |
| (TARGET_HAS_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT) |
| (TARGET_CAN_USE_HARDWARE_WATCHPOINT, STOPPED_BY_WATCHPOINT) |
| (TARGET_REGION_OK_FOR_HW_WATCHPOINT, DECR_PC_AFTER_HW_BREAK) |
| (target_stopped_data_address, target_insert_watchpoint) |
| (target_remove_watchpoint, target_insert_hw_breakpoint) |
| (target_remove_hw_breakpoint): Don't define. |
| (I386_USE_GENERIC_WATCHPOINTS, I386_DR_LOW_SET_CONTROL) |
| (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR) |
| (I386_DR_LOW_GET_STATUS): Define to call appropriate go32_* |
| functions from go32-nat.c. |
| |
| * config/i386/go32.mh (NATDEPFILES): Add i386-nat.o. |
| |
| * go32-nat.c <top level>: Remove prototypes for watchpoint- |
| related functions. Remove definitions of watchpoint-related |
| macros. |
| (go32_mourn_inferior): Call i386_cleanup_dregs instead of the |
| private cleanup_dregs function. |
| (cleanup_dregs, go32_insert_watchpoint) |
| (go32_insert_aligned_watchpoint, go32_handle_nonaligned_watchpoint) |
| (go32_remove_watchpoint, go32_remove_aligned_watchpoint) |
| (go32_region_ok_for_watchpoint, go32_stopped_by_watchpoint) |
| (go32_remove_hw_breakpoint, go32_insert_hw_breakpoint): Remove. |
| (go32_set_dr, go32_set_dr7, go32_get_dr6): New functions. |
| |
| 2001-03-21 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-tdep.c (fetch_instruction): Warn about slot numbers greater |
| than two instead of generating an error. |
| |
| 2001-03-21 Jim Blandy <jimb@redhat.com> |
| |
| * cp-valprint.c: Reformat to bring into line with GNU coding |
| standards. |
| |
| 2001-03-21 Mark Kettenis <kettenis@gnu.org> |
| |
| Make Linux use the new unified support for hardware breakpoints |
| and watchpoints on x86 targets. |
| * i386-linux-nat.c: Doc fixes. Include "gdb_assert.h". |
| [HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>. |
| (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to |
| appropriate value if not already defined. |
| (register_u_addr): New function. |
| (kernel_u_size): New function. |
| (i386_linux_dr_get, i386_linux_dr_set): New functions. |
| (i386_linux_dr_set_control, i386_linux_dr_set_addr, |
| i386_linux_reset_addr, i386_linux_dr_get_status): New functions. |
| * config/i386/nm-linux.h: Don't include "nm-i386v.h". |
| (I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h". |
| (TARGET_HAS_HARDWARE_WATCHPOINTS, |
| TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT, |
| STOPPED_BY_WATCHPOINT, target_insert_watchpoint, |
| target_remove_watchpoint): Remove macros. |
| (i386_stopped_by_watchpoint, i386_insert_watchpoint, |
| i386_remove_watchpoint): Remove prototypes. |
| (register_u_addr): New prototype. |
| (REGISTER_U_ADDR): Define in terms of register_u_addr. |
| (i386_linux_dr_set_control, i386_linux_dr_set_addr, |
| i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes. |
| (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR, |
| I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros. |
| * config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with |
| i386-nat.o. |
| |
| 2001-03-21 Jim Blandy <jimb@redhat.com> |
| |
| Fix from Dan Berlin: |
| |
| * linespec.c (find_methods): Whitespace differences aren't |
| significant in *un*mangled method names. Use strcmp_iw to compare |
| them, not STREQ. |
| |
| 2001-03-21 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh: Allow a non- multi-arch target to override a |
| predicate. |
| * gdbarch.h: Regenerate. |
| |
| 2001-03-21 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh: Avoid use of ``!''. |
| |
| 2001-03-20 Andrew Cagney <ac131313@redhat.com> |
| |
| * target.h (enum target_signal): Move definition from here. |
| * defs.h (enum target_signal): To here. |
| |
| * config/arc/tm-arc.h (arc_software_single_step): Change type of |
| first parameter to enum target_signal. |
| * config/rs6000/tm-rs6000.h (rs6000_software_single_step): Ditto. |
| * config/sparc/tm-sparc.h (sparc_software_single_step): Ditto. |
| * rs6000-tdep.c (rs6000_software_single_step): Update. |
| |
| 2001-03-20 Andrew Cagney <ac131313@redhat.com> |
| |
| * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro |
| already defined. |
| |
| From 2000-08-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>: |
| * stabsread.c (define_symbol): A parameter ('R'), a local ('r'), |
| or a reference ('a') can be in a pseudo register. |
| * infcmd.c (do_registers_info): Must take into account the pseudo |
| registers to print their value. |
| (registers_info): Likewise. |
| * stack.c (frame_info): Likewise. |
| * frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers. |
| |
| 2001-03-21 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| Unified support for hardware breakpoints and watchpoints on |
| x86 targets: |
| |
| * config/i386/nm-i386.h: New file. |
| |
| * config/i386/nm-i386.h: (i386_cleanup_dregs) |
| (i386_insert_watchpoint, i386_remove_watchpoint) |
| (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp) |
| (i386_stopped_data_address, i386_insert_hw_breakpoint) |
| (i386_remove_hw_breakpoint): Declare prototypes. |
| [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT): |
| Define if not already defined. |
| (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT) |
| (STOPPED_BY_WATCHPOINT, target_stopped_data_address) |
| (target_insert_watchpoint, target_remove_watchpoint) |
| (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define |
| to call the appropriate i386_* functions. |
| |
| * i386-nat.c: New file. |
| |
| * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE) |
| (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN) |
| (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros. |
| (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count) |
| (maint_show_dr): New variables. |
| (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits) |
| (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint) |
| (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint) |
| (i386_remove_watchpoint, i386_region_ok_for_watchpoint) |
| (i386_stopped_data_address, i386_stopped_by_hwbp) |
| (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New |
| functions. |
| (_initialize_i386_nat): New function. |
| [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command |
| `show-debug-regs', sets maint_show_dr to non-zero value and |
| activates debugging print-outs in functions which insert, remove, |
| and test watchpoints and hardware breakpoints. |
| |
| * Makefile.in (i386-nat.o): New target. |
| (ALLDEPFILES): Add i386-nat.o. |
| |
| 2001-03-21 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-tdep.c: Add back _initialize_i386_tdep prototype with |
| appropriate comment. |
| |
| 2001-03-20 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/alpha/alpha-linux.mh (NATDEPFILES): Use proc-service.o, |
| thread-db.o, and lin-lwp.o for thread support instead of |
| linux-thread.o and lin-thread.o. |
| * config/alpha/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS) |
| (ATTACH_LWP): Define to use the following lin-lwp.c functions... |
| (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals) |
| (lin_lwp_attach_lwp): Declare. |
| |
| 2001-03-20 Jim Blandy <jimb@redhat.com> |
| |
| Fix from Dan Berlin: |
| |
| * Makefile.in: Clean up dependencies on ../include/demangle.h. |
| (demangle_h): New variable. |
| (jv-typeprint.o, jv-valprint.o, linespec.o): Use it. |
| |
| 2001-03-20 Andrew Cagney <ac131313@redhat.com> |
| |
| * target.h (SOFTWARE_SINGLE_STEP_P): Add empty parameter list. |
| * breakpoint.c (bpstat_stop_status): Update. |
| * infrun.c (handle_inferior_event): Ditto. |
| * mips-tdep.c (mips_dump_tdep): Ditto. |
| * infrun.c (resume): Ditto. |
| * infptrace.c (child_resume): Ditto. |
| * config/mips/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| * config/sh/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| * config/sparc/tm-sparc.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| * config/arm/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| * config/arc/tm-arc.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| * config/powerpc/tm-ppc-eabi.h (SOFTWARE_SINGLE_STEP_P): Ditto. |
| |
| 2001-03-20 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP): Replace abort |
| with internal_error. |
| |
| 2001-03-20 Jim Blandy <jimb@redhat.com> |
| |
| Fix from Dan Berlin: |
| |
| * linespec.c (find_methods): Just call CHECK_TYPEDEF on t, rather |
| than asking for sym_class's type; that's circuitous. Remove |
| sym_class, since the last use of it is gone. |
| |
| 2001-03-20 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * breakpoint.c (print_it_typical) <bp_access_watchpoint> [UI_OUT]: |
| Correct the order of calls to ui_out_field_string and |
| ui_out_list_begin when bs->old_val is NULL. |
| |
| 2001-03-19 Kevin Buettner <kevinb@redhat.com> |
| |
| * configure.in (AC_CHECK_HEADERS): Check for existence of nlist.h. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * solib-legacy.c (nlist.h): Include if HAVE_NLIST_H is defined. |
| |
| 2001-03-19 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/i386/i386v42mp.mh (NATDEPFILES): List all files on |
| same line to avoid problems with Unixware 7's make when building |
| a cross debugger. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * defs.h (malloc): Move declaration from here. |
| * utils.c (malloc): To here. |
| * config/pa/xm-hppah.h (malloc): Delete declaration. |
| |
| * gnu-nat.c (make_proc): Use xmalloc instead of malloc. |
| * hp-psymtab-read.c (hpread_call_pxdb): Ditto. |
| (hpread_quick_traverse): Ditto. |
| * infttrace.c (create_thread_info): Ditto. |
| (kill_inferior): Ditto. |
| * gnu-nat.c (make_inf): Ditto, and don't check return value. |
| * procfs.c (proc_update_threads): Ditto. |
| * valprint.c (print_decimal_chars): Ditto. |
| * gdbtypes.c (cfront_mangle_name): Use xasprintf instead of |
| malloc and sprintf. |
| * remote-rdp.c (rdp_set_command_line): Ditto. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * defs.h (realloc): Move declaration from here. |
| * utils.c (realloc): To here. |
| * config/pa/xm-hppah.h (realloc): Delete declaration. |
| * lin-thread.c (insert_thread): Use xrealloc instead of realloc. |
| * symfile.c (add_filename_language): Ditto. |
| * event-loop.c (create_file_handler): Ditto. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * defs.h (free): Move declaration from here. |
| * utils.c (free): To here. |
| (xfree): Document as the only call to free(). |
| * config/pa/xm-hppah.h (free): Delete declaration. |
| |
| 2001-03-19 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/ia64/linux.mh (NATDEPFILES): Add proc-service.o to |
| this list. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * eval.c (evaluate_subexp): Remove #ifdef __STDC__ and ``inline''. |
| * config/mips/xm-mips.h (offsetof): Define when !GNUC not !STDC. |
| * cli/cli-cmds.c (init_cli_cmds): Remove #ifdef __STDC__ |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO: List known problems with TUI. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Jimmy Guo stepped down as a maintiner (TUI, |
| gdb.hp). |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * remote.c (remote_cisco_section_offsets): Do not cast result from |
| bfd_get_section_name. |
| (compare_sections_command): Ditto. |
| (remote_cisco_section_offsets): Make ``p'' a const pointer. |
| (compare_sections_command): Ditto for ``sectname''. |
| |
| 2001-03-19 Andrew Cagney <ac131313@redhat.com> |
| |
| From Mon Nov 20 13:59:29 2000 Andrew Cagney <cagney@b1.cygnus.com>: |
| * valops.c (hand_function_call): Simplify computation of the |
| address of the pushed argument. |
| |
| 2001-03-17 Andrew Cagney <ac131313@redhat.com> |
| |
| * p-exp.y (parse_number): Avoid shift overflow when ``long''. |
| Code copied from c-exp.y. |
| |
| 2001-03-18 Kevin Buettner <kevinb@redhat.com> |
| |
| * acconfig.h (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS) |
| (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS) |
| (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New configure macros. |
| * configure.in (HAVE_STRUCT_LINK_MAP32): Move this test out |
| of the Solaris procfs testing section. Instead, group with... |
| (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS) |
| (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS) |
| (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New <link.h> tests. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Use |
| new configure macros to choose which (if any) code to |
| compile in. Added code to explicitly handle *BSD systems; |
| these systems were previously handled only through macro |
| redefinition. Also, due to the way the autoconf tests are set |
| up, this function will no longer return a non-zero value when |
| GDB is configured as a cross debugger. I.e, cross debuggers |
| will no longer be able to "accidentally" get the host system's |
| link map offsets. |
| |
| 2001-03-18 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/i386/nbsd.mh (NATDEPFILES): List all files on the same |
| line to avoid build problem on NetBSD 1.4. |
| |
| 2001-03-17 Michael Chastain <chastain@redhat.com> |
| |
| * win32-nat.c (child_attach): check args for NULL before passing |
| to strtoul. This fixes PR gdb/43. |
| |
| 2001-03-17 Mark Kettenis <kettenis@gnu.org> |
| |
| * i387-nat.h: Doc Fix. |
| |
| * i386-tdep.c: Fix formatting. |
| (i386_get_frame_setup, i386_follow_jump, codestream_read, |
| codestream_seek, codestream_fill, skip_trampoline_code, |
| gdb_print_insn_i386, _initialize_i386_tdep): Remove redundant |
| prototypoes. |
| |
| 2001-03-17 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/i386/tm-linux.h (TARGET_ANALYZE_FLOATING): Remove. It's |
| no longer used. Also remove associated FIXME. |
| |
| 2001-03-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdbarch.sh: Add classes ``m'' and ``M'' for pure multi-arch. Do |
| not generate macro wrappers for multi-arch functions or |
| predicates. |
| (class_is_info_p, class_is_predicate_p): Update. |
| (class_is_function_p, class_is_variable_p): Ditto. |
| (class_is_multiarch_p): New class function. |
| |
| 2001-03-16 J.T. Conklin <jtc@redback.com> |
| |
| * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use |
| h8300_frame_args_address from frame_args_address. |
| (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address |
| from frame_locals_address. |
| (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook |
| from print_register_hook. |
| (h8300_frame_args_address): Declare. |
| (h8300_frame_find_saved_regs): Declare. |
| (h8300_frame_locals_address): Declare. |
| (h8300_frame_saved_pc): Declare. |
| (h8300_pop_frame): Declare. |
| (h8300_print_register_hook): Declare. |
| * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration. |
| (h8300_frame_args_address): Renamed from frame_args_address. |
| (h8300_frame_locals_address): Renamed from frame_locals_address. |
| (h8300_pop_frame): Renamed from pop_frame. |
| (h8300_print_register_hook): Renamed from print_register_hook. |
| |
| 2001-03-16 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-svr4.c (bfd_lookup_symbol): Change type of |
| ``storage_needed'' from unsigned int to long in order to |
| match return type of bfd_get_symtab_upper_bound() and |
| bfd_get_dynamic_symtab_upper_bound(). |
| * solib-aix5.c (bfd_lookup_symbol): Likewise. Also, eliminate |
| REASONABLE_LIMIT hack which had been added to work around this |
| problem. |
| |
| 2001-03-15 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c (bfd_lookup_symbol, build_so_list_from_mapfile) |
| (aix5_relocate_main_executable, aix5_clear_solib): Replace calls |
| to free() with calls to xfree(). |
| (bfd_lookup_symbol): Eliminate use of PTR. |
| (build_so_list_from_mapfile): Use xasprintf() instead of sprintf(). |
| |
| 2001-03-15 Martin Hunt <hunt@redhat.com> |
| |
| * linespec.c (decode_line_1): Remove trailing quote |
| when parsing double quotes. |
| |
| 2001-03-15 Kevin Buettner <kevinb@redhat.com> |
| |
| * uw-thread.c (read_thr_debug, read_map, read_lwp, thread_iter) |
| (libthread_stub, libthread_init): Pass NULL for the mem_attrib |
| argument in the to_xfer_memory calls. |
| |
| 2001-03-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Fix typo - w65 not w64. Still doesn't build. |
| * TODO (GDB 5.1 - Cleanups): Add status of targets being obsoleted. |
| |
| 2001-03-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * wince.c (child_xfer_memory): Add attrib parameter. |
| * symm-nat.c (child_xfer_memory): Ditto. |
| * mac-nat.c (child_xfer_memory): Ditto. |
| * infttrace.c (child_xfer_memory): Ditto. |
| * procfs.c (procfs_xfer_memory): Ditto. |
| * lin-thread.c (thread_db_xfer_memory): Ditto. |
| * gnu-nat.c (gnu_xfer_memory): Ditto. |
| |
| 2001-03-14 Andrew Cagney <ac131313@redhat.com> |
| |
| * NEWS: Mention that Harris/CXUX m88k is obsolete. |
| |
| 2001-03-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/mips/tm-mips.h: Include "regcache.h" for macros refering |
| to regcache functions. |
| * config/m68k/tm-m68k.h: Ditto. |
| * config/i386/tm-i386v.h: Ditto. |
| * config/mcore/tm-mcore.h: Ditto. |
| * config/m88k/tm-m88k.h: Ditto. |
| * config/m68k/tm-news.h: Ditto. |
| * config/m68k/tm-linux.h: Ditto. |
| * config/m68k/tm-delta68.h: Ditto. |
| * config/m68k/nm-sun3.h: Ditto. |
| * config/m32r/tm-m32r.h: Ditto. |
| * config/i386/tm-symmetry.h: Ditto. |
| * config/i386/tm-sun386.h: Ditto. |
| * config/i386/tm-i386.h: Ditto. |
| * config/i386/nm-symmetry.h: Ditto. |
| * config/i386/nm-sun386.h: Ditto. |
| * config/i386/nm-ptx4.h: Ditto. |
| * config/i386/nm-i386mach.h: Ditto. |
| * config/h8500/tm-h8500.h: Ditto. |
| * config/h8300/tm-h8300.h: Ditto. |
| * config/fr30/tm-fr30.h: Ditto. |
| * config/d30v/tm-d30v.h: Ditto. |
| * config/arm/tm-arm.h: Ditto. |
| * config/arc/tm-arc.h: Ditto. |
| * config/alpha/tm-alpha.h: Ditto. |
| * config/a29k/tm-vx29k.h: Ditto. |
| * config/a29k/tm-a29k.h: Ditto. |
| * config/w65/tm-w65.h: Ditto. |
| * config/vax/tm-vax.h: Ditto. |
| * config/v850/tm-v850.h: Ditto. |
| * config/tic80/tm-tic80.h: Ditto. |
| * config/sparc/tm-sparclite.h: Ditto. |
| * config/sparc/tm-sparclet.h: Ditto. |
| * config/sparc/tm-sparc.h: Ditto. |
| * config/sparc/nm-sun4sol2.h: Ditto. |
| * config/sparc/nm-sun4os4.h: Ditto. |
| * config/sparc/nm-nbsd.h: Ditto. |
| * config/powerpc/nm-solaris.h: Ditto. |
| * config/pa/tm-hppao.h: Ditto. |
| * config/pa/tm-hppa.h: Ditto. |
| * config/pa/nm-hppab.h: Ditto. |
| * config/ns32k/tm-umax.h: Ditto. |
| * config/ns32k/tm-merlin.h: Ditto. |
| * config/nm-m3.h: Ditto. |
| * config/nm-gnu.h: Ditto. |
| |
| 2001-03-14 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Update list of targets. Mark arm-* and v850-elf as |
| broken. Mark sh-*, ia64-linux and ns32k-netbsd as buildable. |
| Specify an m88k target. Include sample GAWK script to generate |
| target list. Delete non-existant romp target. |
| * TODO (GDB 5.1 - Cleanups): Update. |
| |
| 2001-03-14 Keith Seitz <keiths@cygnus.com> |
| |
| * linespec.c (decode_line_1): Skip argptr over a leading |
| double quote. Prevents alloc of 0 bytes and memcpy of -1 bytes. |
| |
| 2001-03-14 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/djgpp/fnchange.lst (ia64-aix-nat.c): Add entry. |
| |
| 2001-03-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * ui-out.h: Remove #if __STDC__, assume an ISO-C compiler. |
| * m3-nat.c: Ditto. |
| * p-lang.h: Ditto. |
| * printcmd.c (printf_command): Ditto. |
| * ch-exp.c (match_integer_literal): Ditto. |
| * scm-tags.h: Ditto. |
| * ser-go32.c: Ditto. |
| * hppa-tdep.c (unwind_command): Ditto. |
| * defs.h (volatile): Delete macro definition. Assume __STDC__. |
| * remote-adapt.c (volatile): Ditto. |
| * remote-eb.c (volatile): Ditto. |
| * remote-mm.c (volatile): Ditto. |
| * defs.h (alloca): Assume __STDC__, declare returning void *. |
| |
| 2001-03-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * inferior.h (ARCH_NUM_REGS): Delete definition. |
| * stack.c (frame_info): Use NUM_REGS, not ARCH_NUM_REGS. |
| * regcache.c (registers_changed): Ditto. |
| (registers_fetched): Ditto. |
| * infptrace.c (fetch_inferior_registers): Ditto. |
| (store_inferior_registers): Ditto. |
| * infcmd.c (do_registers_info): Ditto. |
| (registers_info): Ditto. |
| * i386-linux-nat.c (old_fetch_inferior_registers): Ditto. |
| (old_store_inferior_registers): Ditto. |
| * gdbserver/low-linux.c (register_addr): Ditto. |
| * gdbserver/low-hppabsd.c (register_addr): Ditto. |
| * core-aout.c: Don't include "inferior.h". |
| (fetch_core_registers): Use NUM_REGS not ARCH_NUM_REGS. |
| (register_addr): Ditto. |
| |
| 2001-03-13 Fernando Nasser <fnasser@redhat.com> |
| |
| From Steven Johnson <sjohnson@neurizon.net> |
| * cli/cli-script.c (define_command): Fix setting of post hooks. |
| |
| 2001-03-13 Mark Kettenis <kettenis@gnu.org> |
| |
| * i386-linux-tdep.c: Fix formatting and clarify comments. |
| (i386_linux_svr4_fetch_link_map_offsets): Use NULL instead of 0 |
| where appropriate. |
| |
| 2001-03-12 Andrew Cagney <ac131313@redhat.com> |
| |
| * gnu-nat.c: Include "gdb_assert.h" instead of <assert.h>. |
| (proc_update_sc): Use gdb_assert instead of assert. |
| (proc_abort): Ditto. |
| (inf_set_step_thread): Ditto. |
| (gnu_wait): Ditto. |
| (S_exception_raise_request): Ditto. |
| (gnu_terminal_init_inferior): Ditto. |
| |
| 2001-03-09 Kevin Buettner <kevinb@redhat.com> |
| |
| * Makefile.in (solib-svr4.o): Depend on solib-svr4.c, not solib.c. |
| (solib-legacy.o): New makefile target. |
| * solib-legacy.c: New file. |
| * solib-svr4.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete. |
| (default_svr4_fetch_link_map_offsets): Delete. |
| (set_solib_svr4_fetch_link_map_offsets): Declare. |
| (legacy_svr4_fetch_link_map_offsets_hook): Declare. |
| * solib-svr4.c (elf/common.h): Include. |
| (link.h): Only include for SunOS shared library support. |
| (_SYSCALL32): Don't define. |
| (SVR4_FETCH_LINK_MAP_OFFSETS): Define. |
| (default_svr4_fetch_link_map_offsets): Made static; added forward |
| declaration. |
| (fetch_link_map_offsets): New static global. |
| (legacy_svr4_fetch_link_map_offsets_hook): New global variable. |
| (default_svr4_fetch_link_map_offsets): Rewritten. The guts |
| of what used to be in this function now reside in |
| legacy_svr4_fetch_link_map_offsets() in solib-legacy.c. |
| (open_symbol_file_object): Fix declaration in SunOS section |
| of the code. |
| (set_solib_svr4_fetch_link_map_offsets): New extern function. |
| (init_fetch_link_map_offsets): New static function. |
| (_initialize_svr4_solib): Put static global fetch_link_map_offsets |
| under multiarch control. |
| |
| * config/alpha/alpha-linux.mt (TDEPFILES): Add solib-legacy.o to |
| list. |
| * config/alpha/fbsd.mh (NATDEPFILES): Likewise. |
| * config/arm/linux.mt (TDEPFILES): Likewise. |
| * config/i386/fbsd.mh (NATDEPFILES): Likewise. |
| * config/i386/i386dgux.mh (NATDEPFILES): Likewise. |
| * config/i386/i386gnu.mh (NATDEPFILES): Likewise. |
| * config/i386/i386sco5.mh (NATDEPFILES): Likewise. |
| * config/i386/i386sol2.mt (TDEPFILES): Likewise. |
| * config/i386/i386v4.mh (NATDEPFILES): Likewise. |
| * config/i386/i386v42mp.mh (NATDEPFILES): Likewise. |
| * config/i386/linux.mt (TDEPFILES): Likewise. |
| * config/i386/nbsd.mh (NATDEPFILES): Likewise. |
| * config/i386/nbsdelf.mh (NATDEPFILES): Likewise. |
| * config/i386/ncr3000.mt (TDEPFILES): Likewise. |
| * config/i386/ptx4.mh (XDEPFILES): Likewise. |
| * config/i386/sun386.mt (TDEPFILES): Likewise. |
| * config/ia64/linux.mt (TDEPFILES): Likewise. |
| * config/m68k/linux.mt (TDEPFILES): Likewise. |
| * config/m68k/m68kv4.mh (NATDEPFILES): Likewise. |
| * config/m68k/nbsd.mh (NATDEPFILES): Likewise. |
| * config/m68k/sun2os4.mt (TDEPFILES): Likewise. |
| * config/m68k/sun3os4.mt (TDEPFILES): Likewise. |
| * config/m88k/delta88v4.mh (NATDEPFILES): Likewise. |
| * config/mips/mipsv4.mh (NATDEPFILES): Likewise. |
| * config/ns32k/nbsd.mh (NATDEPFILES): Likewise. |
| * config/powerpc/linux.mt (TDEPFILES): Likewise. |
| * config/powerpc/nbsd.mh (NATDEPFILES): Likewise. |
| * config/powerpc/solaris.mh (NATDEPFILES): Likewise. |
| * config/sh/linux.mt (TDEPFILES): Likewise. |
| * config/sparc/linux.mt (TDEPFILES): Likewise. |
| * config/sparc/nbsd.mh (NATDEPFILES): Likewise. |
| * config/sparc/nbsdelf.mh (NATDEPFILES): Likewise. |
| * config/sparc/sp64linux.mt (TDEPFILES): Likewise. |
| * config/sparc/sun4os4.mt (TDEPFILES): Likewise. |
| * config/sparc/sun4sol2.mh (NATDEPFILES): Likewise. |
| |
| 2001-03-09 Kevin Buettner <kevinb@redhat.com> |
| |
| * utils.c (xmrealloc, xcalloc): Return NULL for zero-sized requests. |
| |
| 2001-03-09 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS (Write After Approval): Update Philip Blundell. |
| |
| 2001-03-09 Keith Seitz <keiths@cygnus.com> |
| |
| * MAINTAINERS: Add myself to write after approval list. |
| |
| 2001-03-09 Mark Kettenis <kettenis@gnu.org> |
| |
| * i387-tdep.c (print_i387_status_word): Fix printing of Stack |
| fault flag. It is bit 6 of the x87 FPU status word, not bit 7. |
| |
| 2001-03-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure.host (m88*-harris-cxux*): Mark as obsolete. |
| * configure.tgt: Ditto. |
| * config/m88k/xm-cxux.h: Ditto. |
| * config/m88k/tm-cxux.h: Ditto. |
| * config/m88k/nm-cxux.h: Ditto. |
| * config/m88k/cxux.mt: Ditto. |
| * config/m88k/cxux.mh: Ditto. |
| |
| 2001-03-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in: Delete rules for obsolete files. |
| |
| Thu Mar 8 15:43:40 2001 David Taylor <taylor@redhat.com> |
| |
| * stack.c (parse_frame_specification): For one argument case, |
| handle the situation where the argument is an integer, not an |
| address -- arguably the most common case. This matters on |
| targets where pointers and addresses are different. |
| |
| 2001-03-08 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO: Revise 5.1 list. Delete PARAMS task. Add coding standard |
| review. Clarify GNU/LINUX/sparc. Move other tasks to 5.2 or |
| general. |
| |
| 2001-03-07 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (GDB 5.1 Known Problems): Document problem of building GDB |
| with SID on Solaris 8. |
| |
| 2001-03-07 Mark Kettenis <kettenis@gnu.org> |
| |
| * defs.h: Provide prototypes for floatformat_is_negative, |
| floatformat_is_nan and floatformat_mantissa. |
| * utils.c: Include "gdb_assert.h". |
| (floatformat_is_negative): New function. |
| (floatformat_is_nan): New function. |
| (floatformat_mantissa): New function. |
| * valprint.c: Include "floatformat.h". |
| (print_floating): Get rid of the Linux-specific |
| TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the |
| help these new functions. Print NaN's in a format conforming to |
| ISO C99. |
| |
| 2001-03-07 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * top.c (init_main): Make `set history file name' complete on file |
| names. |
| |
| 2001-03-06 J.T. Conklin <jtc@redback.com> |
| |
| * Makefile.in (LINTFLAGS): Update to contain all of the macros |
| which define include paths used when compiling. |
| |
| * util.c (savestring, msavestring): Change type of length argument. |
| * defs.h (savestring, msavestring): Update to match. |
| |
| * symtab.h (decode_line_1): Removed declaration. |
| |
| * symfile.c (#include <assert.h>): Removed. |
| |
| * arch-utils.c (#include <ctype.h>): Removed. |
| * c-typeprint.c: Likewise. |
| * dbxread.c: Likewise. |
| * gdbtypes.c: Likewise. |
| * target.c: Likewise. |
| * os9kread.c: Likewise. |
| |
| * c-valprint.c (#include "demangle.h"): Removed. |
| * ch-typeprint.c: Likewise. |
| * eval.c: Likewise. |
| * f-typeprint.c: Likewise. |
| * f-valprint.c: Likewise. |
| * m2-typeprint.c: Likewise. |
| * typeprint.c: Likewise. |
| * p-typeprint.c: Likewise. |
| * valarith.c: Likewise. |
| * valprint.c: Likewise. |
| |
| * m2-typeprint.c (#include "gdb_string.h"): Removed. |
| * nlmread.c: Likewise. |
| |
| * mdebugread.c (#include "gdb-stabs.h"): Removed. |
| * minsyms.c: Likewise. |
| * mipsread.c: Likewise. |
| * nlmread.c: Likewise. |
| |
| * m2-typeprint.c (#include "obstack.h"): Removed. |
| * m2-valprint.c: Likewise. |
| |
| * event-loop.c (#include <setjmp.h>): Removed. |
| |
| 2001-03-06 Stan Shebs <shebs@apple.com> |
| |
| * MAINTAINERS: Remove self from specific maintenance domains |
| (macos, gdbserver, documentation, testsuite). |
| |
| 2001-03-06 Kevin Buettner <kevinb@redhat.com> |
| |
| * 29k-share/udi/udip2soc.c, Makefile.in, a29k-tdep.c, |
| a68v-nat.c, abug-rom.c, aclocal.m4, alpha-nat.c, alpha-tdep.c, |
| annotate.c, annotate.h, arc-tdep.c, arch-utils.c, |
| arch-utils.h, arm-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c, |
| ax.h, bcache.c, bcache.h, blockframe.c, breakpoint.c, |
| breakpoint.h, buildsym.c, buildsym.h, c-exp.y, c-lang.c, |
| c-lang.h, c-typeprint.c, c-valprint.c, call-cmds.h, ch-exp.c, |
| ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c, |
| cli/cli-cmds.h, cli/cli-decode.c, cli/cli-decode.h, |
| cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.h, |
| cli/cli-utils.h, cli-out.c, cli-out.h, coff-solib.c, |
| coff-solib.h, coffread.c, command.h, complaints.c, |
| complaints.h, completer.c, completer.h, |
| config/a29k/nm-ultra3.h, config/a29k/tm-a29k.h, |
| config/a29k/tm-ultra3.h, config/a29k/tm-vx29k.h, |
| config/a29k/xm-ultra3.h, config/alpha/nm-fbsd.h, |
| config/alpha/nm-linux.h, config/alpha/nm-osf.h, |
| config/alpha/nm-osf2.h, config/alpha/nm-osf3.h, |
| config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h, |
| config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h, |
| config/alpha/xm-fbsd.h, config/arc/tm-arc.h, |
| config/arm/nm-linux.h, config/arm/tm-arm.h, |
| config/arm/tm-embed.h, config/d10v/tm-d10v.h, |
| config/d30v/tm-d30v.h, config/fr30/tm-fr30.h, |
| config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, |
| config/i386/nm-fbsd.h, config/i386/nm-gnu.h, |
| config/i386/nm-i386bsd.h, config/i386/nm-i386mach.h, |
| config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h, |
| config/i386/nm-i386v.h, config/i386/nm-i386v4.h, |
| config/i386/nm-i386v42mp.h, config/i386/nm-linux.h, |
| config/i386/nm-nbsd.h, config/i386/nm-nbsdelf.h, |
| config/i386/nm-ptx4.h, config/i386/nm-sun386.h, |
| config/i386/nm-symmetry.h, config/i386/tm-cygwin.h, |
| config/i386/tm-fbsd.h, config/i386/tm-i386.h, |
| config/i386/tm-i386aix.h, config/i386/tm-i386bsd.h, |
| config/i386/tm-i386gnu.h, config/i386/tm-i386lynx.h, |
| config/i386/tm-i386m3.h, config/i386/tm-i386mk.h, |
| config/i386/tm-i386nw.h, config/i386/tm-i386os9k.h, |
| config/i386/tm-i386sco5.h, config/i386/tm-i386sol2.h, |
| config/i386/tm-i386v.h, config/i386/tm-i386v4.h, |
| config/i386/tm-i386v42mp.h, config/i386/tm-linux.h, |
| config/i386/tm-nbsd.h, config/i386/tm-ptx.h, |
| config/i386/tm-ptx4.h, config/i386/tm-sun386.h, |
| config/i386/tm-symmetry.h, config/i386/tm-vxworks.h, |
| config/i386/xm-fbsd.h, config/i386/xm-i386bsd.h, |
| config/i386/xm-i386gnu.h, config/i386/xm-i386m3.h, |
| config/i386/xm-i386mach.h, config/i386/xm-i386mk.h, |
| config/i386/xm-i386sco.h, config/i386/xm-i386v4.h, |
| config/i386/xm-linux.h, config/i386/xm-nbsd.h, |
| config/i386/xm-ptx.h, config/i386/xm-ptx4.h, |
| config/i386/xm-sun386.h, config/i386/xm-symmetry.h, |
| config/i960/tm-i960.h, config/i960/tm-mon960.h, |
| config/i960/tm-nindy960.h, config/i960/tm-vx960.h, |
| config/ia64/nm-aix.h, config/ia64/nm-linux.h, |
| config/ia64/tm-aix.h, config/ia64/tm-ia64.h, |
| config/ia64/tm-linux.h, config/ia64/xm-aix.h, |
| config/ia64/xm-linux.h, config/m68k/nm-apollo68b.h, |
| config/m68k/nm-delta68.h, config/m68k/nm-dpx2.h, |
| config/m68k/nm-hp300bsd.h, config/m68k/nm-hp300hpux.h, |
| config/m68k/nm-linux.h, config/m68k/nm-sun3.h, |
| config/m68k/tm-apollo68b.h, config/m68k/tm-cisco.h, |
| config/m68k/tm-dpx2.h, config/m68k/tm-es1800.h, |
| config/m68k/tm-hp300bsd.h, config/m68k/tm-hp300hpux.h, |
| config/m68k/tm-isi.h, config/m68k/tm-linux.h, |
| config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h, |
| config/m68k/tm-mac.h, config/m68k/tm-monitor.h, |
| config/m68k/tm-nbsd.h, config/m68k/tm-news.h, |
| config/m68k/tm-os68k.h, config/m68k/tm-sun3.h, |
| config/m68k/tm-vx68.h, config/m68k/xm-3b1.h, |
| config/m68k/xm-apollo68b.h, config/m68k/xm-dpx2.h, |
| config/m68k/xm-hp300bsd.h, config/m68k/xm-hp300hpux.h, |
| config/m68k/xm-linux.h, config/m68k/xm-m68kv4.h, |
| config/m68k/xm-mpw.h, config/m68k/xm-news.h, |
| config/m68k/xm-sun2.h, config/m68k/xm-sun3.h, |
| config/m68k/xm-sun3os4.h, config/m88k/nm-delta88v4.h, |
| config/m88k/tm-delta88.h, config/m88k/tm-delta88v4.h, |
| config/m88k/tm-m88k.h, config/m88k/xm-cxux.h, |
| config/m88k/xm-delta88.h, config/m88k/xm-delta88v4.h, |
| config/m88k/xm-dgux.h, config/mcore/tm-mcore.h, |
| config/mips/nm-irix3.h, config/mips/nm-irix4.h, |
| config/mips/nm-irix5.h, config/mips/nm-mips.h, |
| config/mips/nm-news-mips.h, config/mips/tm-bigmips.h, |
| config/mips/tm-embed.h, config/mips/tm-embed64.h, |
| config/mips/tm-embedl.h, config/mips/tm-embedl64.h, |
| config/mips/tm-irix3.h, config/mips/tm-irix5.h, |
| config/mips/tm-mips.h, config/mips/tm-mips64.h, |
| config/mips/tm-mipsm3.h, config/mips/tm-mipsv4.h, |
| config/mips/tm-tx39.h, config/mips/tm-tx39l.h, |
| config/mips/tm-vr4100.h, config/mips/tm-vr4300.h, |
| config/mips/tm-vr4300el.h, config/mips/tm-vr4xxx.h, |
| config/mips/tm-vr4xxxel.h, config/mips/tm-vr5000.h, |
| config/mips/tm-vr5000el.h, config/mips/xm-irix3.h, |
| config/mips/xm-irix4.h, config/mips/xm-irix5.h, |
| config/mips/xm-mips.h, config/mips/xm-mipsm3.h, |
| config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h, |
| config/mips/xm-riscos.h, config/mn10200/tm-mn10200.h, |
| config/mn10300/tm-mn10300.h, config/nm-gnu.h, |
| config/nm-linux.h, config/nm-lynx.h, config/nm-m3.h, |
| config/nm-sysv4.h, config/none/nm-none.h, |
| config/none/tm-none.h, config/none/xm-none.h, |
| config/ns32k/nm-nbsd.h, config/ns32k/nm-umax.h, |
| config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h, |
| config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h, |
| config/ns32k/xm-merlin.h, config/ns32k/xm-ns32km3.h, |
| config/pa/nm-hppab.h, config/pa/nm-hppah.h, |
| config/pa/nm-hppao.h, config/pa/tm-hppa.h, |
| config/pa/tm-hppa64.h, config/pa/tm-hppah.h, |
| config/pa/xm-hppab.h, config/pa/xm-hppah.h, |
| config/powerpc/nm-aix.h, config/powerpc/nm-linux.h, |
| config/powerpc/nm-macos.h, config/powerpc/nm-nbsd.h, |
| config/powerpc/tm-cygwin.h, config/powerpc/tm-linux.h, |
| config/powerpc/tm-macos.h, config/powerpc/tm-ppc-aix.h, |
| config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h, |
| config/powerpc/tm-ppcle-eabi.h, config/powerpc/tm-solaris.h, |
| config/powerpc/xm-aix.h, config/powerpc/xm-linux.h, |
| config/powerpc/xm-mpw.h, config/rs6000/nm-rs6000.h, |
| config/rs6000/tm-rs6000.h, config/rs6000/tm-rs6000ly.h, |
| config/rs6000/xm-aix4.h, config/rs6000/xm-rs6000.h, |
| config/sh/tm-linux.h, config/sh/tm-sh.h, config/sh/tm-wince.h, |
| config/sparc/nm-linux.h, config/sparc/nm-nbsd.h, |
| config/sparc/nm-nbsdelf.h, config/sparc/nm-sparclynx.h, |
| config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h, |
| config/sparc/tm-linux.h, config/sparc/tm-sp64.h, |
| config/sparc/tm-sp64sim.h, config/sparc/tm-sparc.h, |
| config/sparc/tm-sparclet.h, config/sparc/tm-sparclite.h, |
| config/sparc/tm-sparclynx.h, config/sparc/tm-spc-em.h, |
| config/sparc/tm-sun4os4.h, config/sparc/tm-sun4sol2.h, |
| config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, |
| config/tic80/tm-tic80.h, config/tm-linux.h, config/tm-lynx.h, |
| config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h, |
| config/w65/tm-w65.h, config/xm-aix4.h, config/xm-lynx.h, |
| config/xm-mpw.h, config/xm-nbsd.h, config/xm-sysv4.h, |
| config/z8k/tm-z8k.h, configure.in, core-aout.c, core-regset.c, |
| core-sol2.c, corefile.c, corelow.c, cp-valprint.c, |
| cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c, d30v-tdep.c, |
| dbug-rom.c, dbxread.c, dcache.c, dcache.h, defs.h, |
| delta68-nat.c, demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c, |
| dstread.c, dve3900-rom.c, dwarf2read.c, dwarfread.c, |
| elfread.c, environ.c, environ.h, eval.c, event-loop.c, |
| event-loop.h, event-top.c, exec.c, expprint.c, f-exp.y, |
| f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, findvar.c, |
| fork-child.c, fr30-tdep.c, frame.c, frame.h, gdb-events.c, |
| gdb-events.h, gdb-events.sh, gdb-stabs.h, gdb.1, gdb_string.h, |
| gdb_thread_db.h, gdbcmd.h, gdbcore.h, gdbserver/Makefile.in, |
| gdbserver/gdbreplay.c, gdbserver/gdbserver.1, |
| gdbserver/low-hppabsd.c, gdbserver/low-linux.c, |
| gdbserver/low-lynx.c, gdbserver/low-nbsd.c, |
| gdbserver/low-sim.c, gdbserver/low-sparc.c, |
| gdbserver/low-sun3.c, gdbserver/remote-utils.c, |
| gdbserver/server.c, gdbserver/server.h, gdbserver/utils.c, |
| gdbthread.h, gdbtypes.c, gdbtypes.h, gnu-nat.c, gnu-nat.h, |
| gnu-regex.c, gnu-regex.h, h8300-tdep.c, h8500-tdep.c, |
| hp-psymtab-read.c, hp-symtab-read.c, hp300ux-nat.c, |
| hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c, hpread.c, |
| hpread.h, hpux-thread.c, i386-tdep.c, i386aix-nat.c, |
| i386b-nat.c, i386gnu-nat.c, i386ly-tdep.c, i386m3-nat.c, |
| i386mach-nat.c, i386nbsd-nat.c, i386nbsd-tdep.c, i386v-nat.c, |
| i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c, inferior.h, |
| inflow.c, infptrace.c, infrun.c, inftarg.c, infttrace.c, |
| irix4-nat.c, irix5-nat.c, isi-xdep.c, jv-exp.y, jv-lang.c, |
| jv-lang.h, jv-typeprint.c, jv-valprint.c, kdb-start.c, |
| kod-cisco.c, kod.c, language.c, language.h, lin-thread.c, |
| linespec.c, linespec.h, linux-thread.c, lynx-nat.c, m2-exp.y, |
| m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c, |
| m32r-rom.c, m32r-tdep.c, m68k-tdep.c, m68klinux-nat.c, |
| m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c, |
| mac-xdep.c, main.c, maint.c, mcore-rom.c, mcore-tdep.c, |
| mdebugread.c, mem-break.c, minimon.h, minsyms.c, mips-nat.c, |
| mips-tdep.c, mipsm3-nat.c, mipsread.c, mipsv4-nat.c, |
| mn10200-tdep.c, mn10300-tdep.c, mon960-rom.c, monitor.c, |
| monitor.h, news-xdep.c, nindy-share/env.h, nindy-tdep.c, |
| nlm/Makefile.in, nlmread.c, ns32k-tdep.c, ns32km3-nat.c, |
| ns32knbsd-nat.c, objfiles.c, objfiles.h, ocd.c, ocd.h, |
| op50-rom.c, os9kread.c, osfsolib.c, p-exp.y, pa64solib.c, |
| pa64solib.h, parse.c, parser-defs.h, partial-stab.h, |
| ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c, |
| ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c, |
| proc-flags.c, proc-utils.h, proc-why.c, procfs.c, ptx4-nat.c, |
| rdi-share/Makefile.in, rdi-share/aclocal.m4, regcache.c, |
| regcache.h, remote-adapt.c, remote-array.c, remote-bug.c, |
| remote-e7000.c, remote-eb.c, remote-es.c, remote-est.c, |
| remote-hms.c, remote-mips.c, remote-mm.c, remote-nindy.c, |
| remote-nrom.c, remote-os9k.c, remote-rdi.c, remote-rdp.c, |
| remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c, |
| remote-utils.c, remote-utils.h, remote-vx.c, remote.c, |
| remote.h, reply_mig_hack.awk, rom68k-rom.c, rs6000-nat.c, |
| rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h, |
| scm-valprint.c, ser-e7kpc.c, ser-mac.c, ser-ocd.c, ser-pipe.c, |
| ser-tcp.c, ser-unix.c, serial.c, serial.h, sh-tdep.c, |
| sh3-rom.c, sol-thread.c, solib-aix5.c, solib-svr4.c, solib.c, |
| solib.h, solist.h, somread.c, somsolib.c, somsolib.h, |
| source.c, sparc-nat.c, sparc-tdep.c, sparcl-tdep.c, |
| sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c, |
| standalone.c, stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c, |
| symfile.c, symfile.h, symm-nat.c, symm-tdep.c, symmisc.c, |
| symtab.c, symtab.h, target.c, target.h, terminal.h, thread.c, |
| tic80-tdep.c, top.c, top.h, tracepoint.c, tracepoint.h, |
| typeprint.c, ui-file.c, ui-file.h, ui-out.h, ultra3-nat.c, |
| ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c, |
| valarith.c, valops.c, valprint.c, value.h, values.c, varobj.h, |
| vax-tdep.c, version.h, vx-share/vxWorks.h, vx-share/xdr_ld.c, |
| vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h, |
| vx-share/xdr_rdb.c, w65-tdep.c, w89k-rom.c, win32-nat.c, |
| wrapper.c, wrapper.h, xcoffread.c, xcoffsolib.c, xcoffsolib.h, |
| xmodem.c, xmodem.h, z8k-tdep.c: Update/correct copyright |
| notices. |
| |
| 2001-03-05 Kevin Buettner <kevinb@redhat.com> |
| |
| * acconfig.h (HAVE_PRSYSENT_T, HAVE_PR_SIGSET_T, |
| HAVE_PR_SIGACTION64_T, HAVE_PR_SIGINFO64_T): New configure |
| macros. |
| * configure.in (prsysent_t, pr_sigset_t, pr_sigaction64_t, |
| pr_siginfo64_t): Test for these typedefs in <sys/procfs.h>. |
| (sys/fault.h, sys/select.h): Test for presence of these |
| header files. |
| (ia64-*-aix*): Define NEW_PROC_API for this host. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| * configure.host (ia64-*-aix*): New host. |
| * configure.tgt (ia64-*-aix*): New target. |
| |
| 2001-03-05 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (GDB 5.1 Known Problems): Document z8k as broken. |
| |
| Mon Mar 5 11:56:09 2001 Christopher Faylor <cgf@cygnus.com> |
| |
| * wince.c: Change realloc to xrealloc throughout. |
| (handle_load_dll): Use void * rather than PTR in argument. |
| |
| 2001-03-04 Andrew Cagney <ac131313@redhat.com> |
| |
| * ocd.h (ocd_xfer_memory): Add ``attrib'' parameter. |
| * ocd.c (ocd_xfer_memory): Ditto. |
| * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops. |
| * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as |
| buildable with ,-Werror. |
| |
| * Makefile.in (symfile_h): Define. |
| (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h). |
| * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h". |
| * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with |
| ,-Werror. |
| |
| * dsrec.c (make_srec): Fix internal_error fmt arg. |
| * MAINTAINERS: Document i960-coff as buildable with ,-Werror. |
| |
| 2001-03-03 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c (aix5_relocate_main_executable): Don't use ANOFFSET |
| as an lvalue. |
| |
| 2001-03-02 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS (paper trail): Update. |
| |
| * CONTRIBUTE: Update note on ``Fix PR gdb/4706'' convention. |
| |
| 2001-03-02 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2001-03-01 Tom Rix <trix@redhat.com>: |
| * mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc'' |
| parameter to mn10200_analyze_prologue. |
| |
| * config/mn10200/tm-mn10200.h: Include "regcache.h". |
| * MAINTAINERS: Document that mn10200-elf target is buildable. |
| |
| 2001-03-02 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/ia64/xm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): Move defines |
| from here... |
| * config/ia64/nm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): ...to here. |
| (MONTEREY): Don't define. |
| (AIX5): Define. |
| |
| 2001-03-02 Matt Hiller <hiller@redhat.com> |
| |
| * config/mn10300/tm-mn10300.h (E0_REGNUM): Correct to 15. |
| |
| 2001-03-02 Kevin Buettner <kevinb@redhat.com> |
| |
| * sparc-nat.c (sparc-nat.c): Don't include self. |
| |
| 2001-03-01 J.T. Conklin <jtc@redback.com> |
| |
| * defs.h (__CYGWIN__): Moved conditional which defines __CYGWIN__ |
| if __CYGWIN32__ is set from here. |
| * config/i386/xm-cygwin.h: To here. |
| * config/powerpc/xm-cygwin.h: To here. |
| |
| * i386-stub.c (handle_exception): Use 'T' response packet. |
| |
| 2001-03-01 Michael Snyder <msnyder@mvstp600e.cygnus.com> |
| |
| * m32r-tdep.c: Fix cut and paste error in comment. |
| |
| 2001-02-28 Michael Snyder <msnyder@mvstp600e.cygnus.com> |
| |
| * symtab.c (print_msymbol_info): Print addresses by portable method |
| longest_local_hex_string_custom. Allow for 64-bit addresses. |
| |
| 2001-03-01 J.T. Conklin <jtc@redback.com> |
| |
| * gdbtypes.h (builtin_type_f_integer): Removed duplicate declaration. |
| (MAX_OF_TYPE): Wrap macro definition in parenthesis. |
| (MIN_OF_TYPE): Likewise. |
| |
| * memattr.h (mem_access_mode): Removed extraneous trailing comma. |
| |
| 2001-03-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS. |
| * os9kread.c (os9k_process_one_symbol): Add assert to detect |
| ``loses if sizeof (char *) > sizeof (int)''. |
| |
| 2001-03-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * gdb_assert.h: Document pragmatics behind gdb_assert's case. |
| |
| 2001-03-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependency |
| lists. |
| (mi-main.o): Ditto. |
| |
| 2001-03-01 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (regcache_h): Define. Add $(regcache_h) to |
| dependency lists. |
| |
| 2001-02-28 Michael Snyder <msnyder@mvstp600e.cygnus.com> |
| |
| * printcmd.c (print_address_numeric): Update comments to refer |
| to sizeof addr, not sizeof pointer. |
| (x_command): Remove needless whitespace (shorten long line). |
| |
| * breakpoint.c (print_one_breakpoint): Formatting clean-up. |
| (read_memory_nobpt): Ditto. |
| (ep_is_catchpoint): Ditto. |
| (ep_is_shlib_catchpoint): Ditto. |
| (ep_is_exception_catchpoint): Ditto. |
| (describe_other_breakpoints): Ditto. |
| |
| Wed Feb 28 20:37:36 2001 Andrew Cagney <ac131313@redhat.com> |
| |
| * regcache.h (register_valid): Fix comment documenting valid |
| states. |
| |
| Tue Feb 27 23:56:23 2001 Andrew Cagney <ac131313@redhat.com> |
| |
| From Steven Johnson: |
| * regcache.h: New file. |
| |
| * value.h (read_register_bytes, read_register_gen) |
| (write_register_gen, write_register_bytes) |
| (read_register, read_register_pid) |
| (read_signed_register, read_signed_register_pid) |
| (write_register, write_register_pid) |
| (register_cached, set_register_cached) |
| (register_changed, register_buffer) |
| (registers_changed, supply_register): Move declaration from here. |
| * regcache.h: To here. |
| * gdbcore.h (registers_fetched): Ditto. |
| * inferior.h (registers, registers_valid): Ditto. |
| |
| * regcache.c (generic_target_read_pc, read_pc_pid, read_pc, |
| generic_target_write_pc, write_pc_pid, write_pc, |
| generic_target_read_sp, read_sp, generic_target_write_sp, |
| write_sp, generic_target_read_fp, read_fp, |
| generic_target_write_fp, write_fp): Add note that these functions |
| will be moved from this file. |
| |
| * a29k-tdep.c: Include "regcache.h". |
| * a68v-nat.c: Ditto. |
| * abug-rom.c: Ditto. |
| * alpha-nat.c: Ditto. |
| * alpha-tdep.c: Ditto. |
| * alphabsd-nat.c: Ditto. |
| * arc-tdep.c: Ditto. |
| * arm-linux-nat.c: Ditto. |
| * arm-linux-tdep.c: Ditto. |
| * arm-tdep.c: Ditto. |
| * blockframe.c: Ditto. |
| * core-aout.c: Ditto. |
| * core-sol2.c: Ditto. |
| * corelow.c: Ditto. |
| * cpu32bug-rom.c: Ditto. |
| * cxux-nat.c: Ditto. |
| * d10v-tdep.c: Ditto. |
| * d30v-tdep.c: Ditto. |
| * dbug-rom.c: Ditto. |
| * dink32-rom.c: Ditto. |
| * dve3900-rom.c: Ditto. |
| * findvar.c: Ditto. |
| * fr30-tdep.c: Ditto. |
| * frame.c: Ditto. |
| * go32-nat.c: Ditto. |
| * h8300-tdep.c: Ditto. |
| * h8500-tdep.c: Ditto. |
| * hp300ux-nat.c: Ditto. |
| * hppa-tdep.c: Ditto. |
| * hppab-nat.c: Ditto. |
| * hppah-nat.c: Ditto. |
| * hppam3-nat.c: Ditto. |
| * hpux-thread.c: Ditto. |
| * i386-linux-nat.c: Ditto. |
| * i386-linux-tdep.c: Ditto. |
| * i386-tdep.c: Ditto. |
| * i386aix-nat.c: Ditto. |
| * i386b-nat.c: Ditto. |
| * i386bsd-nat.c: Ditto. |
| * i386gnu-nat.c: Ditto. |
| * i386ly-tdep.c: Ditto. |
| * i386m3-nat.c: Ditto. |
| * i386mach-nat.c: Ditto. |
| * i386nbsd-nat.c: Ditto. |
| * i386v4-nat.c: Ditto. |
| * i387-nat.c: Ditto. |
| * i387-tdep.c: Ditto. |
| * i960-tdep.c: Ditto. |
| * ia64-aix-nat.c: Ditto. |
| * ia64-linux-nat.c: Ditto. |
| * ia64-tdep.c: Ditto. |
| * infptrace.c: Ditto. |
| * infrun.c: Ditto. |
| * irix4-nat.c: Ditto. |
| * irix5-nat.c: Ditto. |
| * lin-lwp.c: Ditto. |
| * lin-thread.c: Ditto. |
| * lynx-nat.c: Ditto. |
| * m3-nat.c: Ditto. |
| * m32r-rom.c: Ditto. |
| * m32r-tdep.c: Ditto. |
| * m68hc11-tdep.c: Ditto. |
| * m68k-tdep.c: Ditto. |
| * m68klinux-nat.c: Ditto. |
| * m68knbsd-nat.c: Ditto. |
| * m68knbsd-tdep.c: Ditto. |
| * m88k-nat.c: Ditto. |
| * m88k-tdep.c: Ditto. |
| * mac-nat.c: Ditto. |
| * mcore-rom.c: Ditto. |
| * mcore-tdep.c: Ditto. |
| * mi/mi-main.c: Ditto. |
| * mips-nat.c: Ditto. |
| * mips-tdep.c: Ditto. |
| * mipsm3-nat.c: Ditto. |
| * mipsv4-nat.c: Ditto. |
| * mn10200-tdep.c: Ditto. |
| * mn10300-tdep.c: Ditto. |
| * monitor.c: Ditto. |
| * ns32km3-nat.c: Ditto. |
| * ns32knbsd-nat.c: Ditto. |
| * ocd.c: Ditto. |
| * pa64solib.c: Ditto. |
| * ppc-bdm.c: Ditto. |
| * ppc-linux-nat.c: Ditto. |
| * ppc-linux-tdep.c: Ditto. |
| * ppcbug-rom.c: Ditto. |
| * ppcnbsd-nat.c: Ditto. |
| * ptx4-nat.c: Ditto. |
| * regcache.c: Ditto. |
| * remote-adapt.c: Ditto. |
| * remote-array.c: Ditto. |
| * remote-bug.c: Ditto. |
| * remote-e7000.c: Ditto. |
| * remote-eb.c: Ditto. |
| * remote-es.c: Ditto. |
| * remote-est.c: Ditto. |
| * remote-hms.c: Ditto. |
| * remote-mips.c: Ditto. |
| * remote-mm.c: Ditto. |
| * remote-nindy.c: Ditto. |
| * remote-os9k.c: Ditto. |
| * remote-rdi.c: Ditto. |
| * remote-rdp.c: Ditto. |
| * remote-sds.c: Ditto. |
| * remote-sim.c: Ditto. |
| * remote-st.c: Ditto. |
| * remote-udi.c: Ditto. |
| * remote-utils.c: Ditto. |
| * remote-vx.c: Ditto. |
| * remote-vx29k.c: Ditto. |
| * remote-vx68.c: Ditto. |
| * remote-vx960.c: Ditto. |
| * remote-vxmips.c: Ditto. |
| * remote-vxsparc.c: Ditto. |
| * remote.c: Ditto. |
| * rom68k-rom.c: Ditto. |
| * rs6000-nat.c: Ditto. |
| * rs6000-tdep.c: Ditto. |
| * sh-tdep.c: Ditto. |
| * sh3-rom.c: Ditto. |
| * sol-thread.c: Ditto. |
| * solib-svr4.c: Ditto. |
| * somsolib.c: Ditto. |
| * sparc-nat.c: Ditto. |
| * sparc-tdep.c: Ditto. |
| * sparcl-tdep.c: Ditto. |
| * sparclet-rom.c: Ditto. |
| * sun3-nat.c: Ditto. |
| * sun386-nat.c: Ditto. |
| * symm-nat.c: Ditto. |
| * target.c: Ditto. |
| * thread-db.c: Ditto. |
| * thread.c: Ditto. |
| * tic80-tdep.c: Ditto. |
| * tracepoint.c: Ditto. |
| * ultra3-nat.c: Ditto. |
| * umax-xdep.c: Ditto. |
| * uw-thread.c: Ditto. |
| * v850-tdep.c: Ditto. |
| * v850ice.c: Ditto. |
| * valops.c: Ditto. |
| * w65-tdep.c: Ditto. |
| * w89k-rom.c: Ditto. |
| * win32-nat.c: Ditto. |
| * wince.c: Ditto. |
| * z8k-tdep.c: Ditto. |
| |
| 2001-02-28 Matt Hiller <hiller@redhat.com> |
| |
| * MAINTAINERS: Add Matt Hiller to Write After Approval list. |
| |
| 2001-02-27 Matt Hiller <hiller@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_stab_reg_to_regnum): New function. |
| (mn10300_gdbarch_init): Set appropriate elements of gdbarch to |
| mn10300_stab_reg_to_regnum. |
| |
| Tue Feb 27 16:56:13 2001 David Taylor <taylor@redhat.com> |
| |
| * symtab.c (search_symbols): Fix off by one error in test for |
| error. |
| |
| 2001-02-23 Andrew Cagney <ac131313@redhat.com> |
| |
| * config/sparc/sp64linux.mt: New file. |
| * configure.tgt: Recognize sparc64-*-linux* as a sp64linux target. |
| * configure.host: Recognize sparc64-*-linux* as a linux host. |
| |
| From 2000-03-17 Jakub Jelinek <jakub@redhat.com>: |
| * config/sparc/tm-sp64linux.h: New file. |
| |
| 2001-02-24 Kevin Buettner <kevinb@redhat.com> |
| |
| * buildsym.c (push_subfile, pop_subfile): Replace call to abort() |
| with call to internal_error(). |
| * dbxread.c (process_one_symbol): Likewise. |
| * exec.c (build_section_table, xfer_memory): Likewise. |
| * h8500-tdep.c (h8500_register_size, h8500_register_virtual_type): |
| Likewise. |
| * hpread.c (hpread_type_translate, hpread_read_array_type) |
| (hpread_type_lookup): Likewise. |
| * i386-tdep.c (gdb_print_insn_i386): Likewise. |
| * i960-tdep.c (mem): Likewise |
| * inflow.c (set_sigio_trap, clear_sigio_trap): Likewise. |
| * infptrace.c (child_resume): Likewise. |
| * infttrace.c (_initialize_infttrace): Likewise. |
| * language.c (binop_result_type, add_language): Likewise. |
| * lynx-nat.c (store_inferior_registers): Likewise. |
| * m3-nat.c (port_chain_insert, m3_trace_me): Likewise. |
| * mdebugread.c (parse_partial_symbols): Likewise. |
| * monitor.c (monitor_printf_noecho, monitor_printf) |
| (monitor_dump_regs): Likewise. |
| * ocd.c (stu_put_packet): Likewise. |
| * printcmd.c (decode_format, print_scalar_formatted): Likewise. |
| * remote-bug.c (bug_open): Likewise. |
| * remote-e7000.c (fetch_regs_from_dump, e7000_wait): Likewise. |
| * remote-es.c (es1800_read_bytes): Likewise. |
| * remote-mips.c (common_breakpoint): Likewise. |
| * remote-rdp.c (send_rdp): Likewise. |
| * remote-sds.c (putmessage): Likewise. |
| * sparc-nat.c (fetch_inferior_registers, store_inferior_registers): |
| Likewise. |
| * sparcl-tdep.c (sparclite_download): Likewise. |
| * symtab.c (lookup_partial_symbol): Likewise. |
| * target.c (push_target, pop_target, initialize_targets): Likewise. |
| * utils.c (internal_verror, malloc_botch, wrap_here, decimal2str): |
| Likewise. |
| * valprint.c (print_decimal, print_longest, print_longest) |
| (strcat_longest): Likewise. |
| * w65-tdep.c (init_frame_pc, w65_push_dummy_frame): Likewise. |
| * xmodem.c (xmodem_send_packet): Likewise. |
| * z8k-tdep.c (init_frame_pc, z8k_push_dummy_frame): Likewise. |
| * config/h8500/tm-h8500.h (STORE_STRUCT_RETURN): Likewise. |
| * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE) |
| (STORE_RETURN_VALUE): Likewise. |
| * config/ns32k/nm-umax.h (REGISTER_U_ADDR): Likewise. |
| * config/ns32k/xm-merlin.h (REGISTER_U_ADDR): Likewise. |
| * config/z8k/tm-z8k.h (STORE_STRUCT_RETURN, STORE_RETURN_VALUE): |
| Likewise. |
| |
| 2001-02-23 Andrew Cagney <ac131313@redhat.com> |
| |
| * CONTRIBUTE: Document how to cite a problem report. |
| * TODO: Note need to replace CONTRIBUTE with generated file. |
| |
| * CONTRIBUTE: Mention that patches do not need to include the |
| generated files gdbarch.h and gdbarch.c. |
| |
| 2001-02-21 Andrew Cagney <ac131313@redhat.com> |
| |
| * value.h (get_saved_register): Move from here. |
| * frame.h: To here. |
| |
| 2001-02-21 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib.h (in_svr4_dynsym_resolve_code): Delete declaration. |
| (in_solib_dynsym_resolve_code): Add declaration. |
| (IN_SOLIB_DYNSYM_RESOLVE_CODE): Changed define to invoke |
| in_solib_dynsym_resolve_code() rather than |
| in_svr4_dynsym_resolve_code(). Also, removed the ifdefs |
| which caused this macro to only be defined when |
| SVR4_SHARED_LIBS is defined. |
| * solib.c (in_solib_dynsym_resolve_code): New function. |
| * solist.h (struct target_so_ops): Add new member |
| in_dynsym_resolve_code. |
| * solib-aix5.c (aix5_in_dynsym_resolve_code): Renamed from |
| in_svr4_dynsym_resolve_code. Also, made static. |
| (_initialize_aix5_solib): Initialize in_dynsym_resolve_code |
| member in aix5_so_ops. |
| * solib-svr4.c (svr4_in_dynsym_resolve_code): Renamed from |
| in_svr4_dynsym_resolve_code. Also, added second version |
| of this function which will be used when SVR4_SHARED_LIBS |
| is not defined. |
| (_initialize_svr4_solib): Initialize in_dynsym_resolve_code |
| member in svr4_so_ops. |
| |
| * ia64-aix-nat.c, ia64-aix-tdep.c, config/ia64/aix.mh, |
| config/ia64/aix.mt, config/ia64/nm-aix.h, config/ia64/tm-aix.h, |
| config/ia64/xm-aix.h: New files. |
| * ia64-tdep.c (_initialize_ia64_tdep): Remove declaration. |
| (ia64_aix_sigcontext_register_address): New declaration. |
| (ia64_gdbarch_init): Provide for initialization of |
| sigcontext_register_address member of struct tdep when |
| on target is detected to be running AIX. |
| * config/ia64/linux.mt (TDEPFILES): Add ia64-aix-tdep.o to |
| this list. |
| |
| 2001-02-20 Kevin Buettner <kevinb@redhat.com> |
| |
| * ia64-tdep.c (ia64_frameless_function_invocation): Implement. |
| * config/ia64/linux.mh (NATDEPFILES): Use thread-db.o and lin-lwp.o |
| for thread support instead of linux-thread.o and lin-thread.o. |
| * config/ia64/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS, |
| ATTACH_LWP): Define to use the following lin-lwp.c functions... |
| (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals, |
| lin_lwp_attach_lwp): Declare. |
| |
| 2001-02-20 Andrew Cagney <ac131313@redhat.com> |
| |
| * mips-tdep.c (do_fp_register_row, do_fp_register_row): Fix printf |
| formatting. |
| |
| 2001-02-20 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c (solib-svr4.h): Remove include. |
| (solib_break_names): Delete names which aren't actually |
| used by AIX5. |
| (bkpt_names): Remove. |
| (aix5_relocate_main_executable, bfd_lookup_symbol): Replace calls |
| to STREQ() with equivalent calls to strcmp(). |
| (in_svr4_dynsym_resolve_code, enable_break, bfd_lookup_symbol, |
| aix5_solib_create_inferior_hook): Revise comments. |
| (enable_break): Remove old ``bkpt_names'' code. |
| |
| 2001-02-19 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in (SFILES): Add frame.c . |
| (COMMON_OBS): Add frame.o . |
| (frame.o): New target. |
| |
| * frame.c (find_saved_register): |
| (default_get_saved_register): |
| (get_saved_register): |
| (read_relative_register_raw_bytes_for_frame): |
| (read_relative_register_raw_bytes): Moved to here. |
| * regcache.c: From here. |
| |
| 2001-02-20 Kevin Buettner <kevinb@redhat.com> |
| |
| * solib-aix5.c: New file. |
| |
| 2001-02-20 Martin M. Hunt <hunt@redhat.com> |
| |
| * solib.c (info_sharedlibrary_command): Don't assume pointers |
| are the same size of long, call longest_local_hex_string_custom(). |
| |
| * solib-svr4.c (LM_ADDR): LM_ADDR is a signed offset, so |
| extract_signed_integer() should be called instead of |
| extract_address(). |
| |
| 2001-02-20 Martin M. Hunt <hunt@redhat.com> |
| |
| * MAINTAINERS: Add Martin Hunt to Write After Approval list. |
| |
| 2001-02-19 Andrew Cagney <ac131313@redhat.com> |
| |
| Frm 2001-02-09 Jim Kingdon <jkingdon@engr.sgi.com>: |
| * mips-tdep.c (mips_register_raw_size): If FP_REGISTER_DOUBLE, |
| then floating point registers are 8 bytes. |
| |
| 2001-02-19 Michael Snyder <msnyder@mvstp600e.cygnus.com> |
| |
| * parse.c (write_exp_msymbol): Make the type CORE_ADDR, to |
| accomodate 64-bit addresses. |
| |
| 2001-02-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| From Peter Schauer <Peter.Schauer@regent.e-technik.tu-muenchen.de> |
| * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not |
| lookup_symbol, when trying to find a symbol with a mangled name, |
| to avoid infinite recursion. |
| |
| 2001-02-18 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (5.2): Mention G++ 3.0 ABI. General cleanups. |
| |
| 2001-02-19 Jonathan Larmour <jlarmour@redhat.com> |
| |
| * arm-tdep.c (check_prologue_cache): Fix off by 1 error. |
| (save_prologue_cache): Ditto. |
| |
| 2001-02-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| From: innadadadavida@yahoo.com: |
| * partial-stab.h (switch): Check that pst is not null |
| before dereferencing it. |
| |
| 2001-02-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| From Andrew Cagney <cagney@b1.cygnus.com>: |
| * symfile.c (add_symbol_file_command): Always initialize |
| my_cleanup using a NULL cleanup. |
| |
| 2001-02-19 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * demangle.c (demangling_style_names): New variable. |
| (_initialize_demangler): Fill demangling_style_names with the |
| names of known demangling styles from libiberty_demanglers[]. Use |
| add_set_enum_cmd instead of add_set_cmd, to get completion on |
| demangling style names. |
| |
| * proc-api.c (_initialize_proc_api): Make `procfs-file' use |
| file-name completion. |
| |
| * remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'. |
| |
| * solib.c (_initialize_solib): Ditto for `solib-search-path' and |
| `solib-absolute-prefix'. |
| |
| * tracepoint.c (_initialize_tracepoint): Ditto for |
| `save-tracepoints'. |
| |
| * win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'. |
| |
| * cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use |
| file-name completion. |
| |
| * infcmd.c (_initialize_infcmd): Make the following commands use |
| the file-name completer: `tty', `args', `path', `paths', and |
| `run'. |
| |
| 2001-02-18 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * go32-nat.c: Include i387-nat.h. |
| (fetch_register): New function, uses some of the guts of |
| go32_fetch_registers and calls i387_supply_register. |
| (go32_fetch_registers): Most of the code moved into |
| fetch_register. Use i387_supply_fsave. |
| (store_register): Use i387_fill_fsave instead of custom code. |
| (go32_store_registers): Use i387_fill_fsave. |
| |
| * Makefile.in (go32-nat.o): Depend on i387-nat.h. |
| |
| * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o. |
| |
| * completer.c (gdb_completer_file_name_break_characters): Remove |
| slash from file-name break characters. |
| [__MSDOS__]: Special definition for DOS/Windows file names. |
| (line_completion_function): When completing on file names, bump |
| `p' to the first file-name constituent character of `word', before |
| invoking the completer. |
| |
| 2001-02-17 Mark Kettenis <kettenis@gnu.org> |
| |
| * i387-nat.c: Include "i387-nat.h". Use regnum instead of regno |
| consistently for parameter names. Fix comments accordingly. |
| (i387_supply_register): New function. |
| (i387_supply_fsave): Implement using i387_supply_register. |
| * i387-nat.h: Use regnum instead of regno consistently for |
| parameter names. Fix comments accordingly. |
| (i387_supply_register): New prototype. |
| |
| 2001-02-16 Michael Snyder <msnyder@mvstp600e.cygnus.com> |
| |
| * remote.c (build_remote_gdbarch_data): Use new TARGET_ADDR_BIT |
| instead of TARGET_PTR_BIT (to support Harvard architectures). |
| |
| 2001-02-16 Andrew Cagney <ac131313@redhat.com> |
| |
| From 2001-02-11 Paul Hilfinger <hilfingr@lisbon.int.act-europe.fr> |
| * hpux-thread.c (hpux_thread_xfer_memory): Add mem_attrib |
| argument to parameter list and to call in order to conform to |
| to_xfer_memory field of struct target_ops. |
| |
| 2001-02-12 Michael Chastain <chastain@redhat.com> |
| |
| * somsolib.c (som_solib_add_solib_objfile): Do not use |
| section relocation feature of syms_from_objfile. Do my own |
| section relocation, offsetting each section of the som by |
| either text_addr - text_link_addr or data_start. |
| |
| 2001-02-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * TODO (5.1): Move ``Hardware watchpint problems'' out of 5.1. |
| |
| 2001-02-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS (paper trail): Update. |
| |
| 2001-02-16 Mark Kettenis <kettenis@gnu.org> |
| |
| * target.h (target_fetch_registers): Fix comment. |
| |
| 2001-02-15 Andrew Cagney <ac131313@redhat.com> |
| |
| * f-exp.y: Include <ctype.h>. |
| (parse_number): Ensure that ``i'' is always initialized. |
| |
| 2001-02-14 Jim Kingdon <jkingdon@engr.sgi.com> |
| |
| * MAINTAINERS: Add myself to paper trail section. |
| |
| 2001-02-14 Michael Sokolov <msokolov@ivan.Harhan.ORG> |
| |
| * configure.in (AC_CHECK_HEADERS): Add sys/file.h. |
| * configure, config.in: Regenerate. |
| * corelow.c: Include <sys/file.h> if present. |
| |
| 2001-02-14 Andrew Cagney <ac131313@redhat.com> |
| |
| * inflow.c (terminal_ours_1): Initialize ``osigtou''. Only |
| declare when have SIGTTOU. |
| |
| 2001-02-14 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * config/djgpp/fnchange.lst: Add entries for gdb/gdbtk/*/ChangeLog-*. |
| |
| 2001-02-12 Jim Kingdon <jkingdon@engr.sgi.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2001-02-11 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * NEWS: Document that "info symbol" works with COFF debug info and |
| its variants. |
| |
| * minsyms.c (lookup_minimal_symbol_by_pc_section): Don't skip |
| symbols whose SYMBOL_BFD_SECTION is NULL. |
| |
| 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> |
| |
| Get rid of AIX specific PC_LOAD_SEGMENT, replace with PC_SOLIB. |
| * xcoffsolib.c (xcoff_solib_address): Renamed from |
| pc_load_segment_name. Return NULL if address is not in a shared |
| library. Cleanup shared library name construction, using xasprintf. |
| Format shared library member names consistent with format in exec.c. |
| (solib_info): Format shared library member names consistent with |
| format in exec.c. |
| * config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB, |
| using xcoff_solib_address for PC_SOLIB definition. |
| * stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer |
| needed. |
| |
| 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> |
| |
| * mipsread.c (read_alphacoff_dynamic_symtab): Replace alloca calls |
| with xmalloc calls and cleanups. |
| |
| 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> |
| |
| * rs6000-nat.c (child_xfer_memory): Add missing parameter |
| 'struct mem_attrib *' required by 2001-01-23 change. |
| |
| 2001-02-08 Jim Kingdon <jkingdon@engr.sgi.com> |
| |
| Updates to "make TAGS": |
| * Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s |
| arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c |
| tahoe-tdep.c. |
| (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS). |
| |
| 2001-02-08 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * config/djgpp/fnchange.lst: Remove extraneous "too many dots". |
| |
| Wed Feb 7 22:39:26 2001 Andrew Cagney <cagney@redhat.com> |
| |
| From Dean Luick <luick@cray.com>: |
| * defs.h (continuation): Remove unused global variable. |
| |
| Wed Feb 7 22:28:31 2001 Andrew Cagney <cagney@redhat.com> |
| |
| * configure.tgt: Remove references to convex, pyramid, altos and |
| tahoe. |
| * configure.host: Ditto. |
| * MAINTAINERS: Ditto. |
| * NEWS: Update. |
| |
| * tahoe-tdep.c: Delete obsolete file. |
| * pyr-xdep.c: Ditto. |
| * pyr-tdep.c: Ditto. |
| * convex-tdep.c: Ditto. |
| * convex-xdep.c: Ditto. |
| * config/tahoe/xm-tahoe.h: Ditto. |
| * config/tahoe/tm-tahoe.h: Ditto. |
| * config/tahoe/tahoe.mt: Ditto. |
| * config/tahoe/tahoe.mh: Ditto. |
| * config/pyr/xm-pyr.h: Ditto. |
| * config/pyr/tm-pyr.h: Ditto. |
| * config/pyr/pyramid.mt: Ditto. |
| * config/pyr/pyramid.mh: Ditto. |
| * config/m68k/xm-altos.h: Ditto. |
| * config/m68k/tm-altos.h: Ditto. |
| * config/m68k/altos.mt: Ditto. |
| * config/m68k/altos.mh: Ditto. |
| * config/convex/xm-convex.h: Ditto. |
| * config/convex/tm-convex.h: Ditto. |
| * config/convex/convex.mt: Ditto. |
| * config/convex/convex.mh: Ditto. |
| * config/convex/Convex.notes: Ditto. |
| * config/arm/xm-arm.h: Ditto. |
| * config/arm/nm-arm.h: Ditto. |
| * config/arm/arm.mt: Ditto. |
| * config/arm/arm.mh: Ditto. |
| * arm-convert.s: Ditto. |
| * arm-xdep.c: Ditto. |
| * altos-xdep.c: Ditto. |
| |
| Wed Feb 7 19:41:21 2001 Andrew Cagney <cagney@redhat.com> |
| |
| * defs.h (internal_error, internal_verror): Add __FILE__ and |
| __LINE__ parameter. |
| * utils.c (internal_error, internal_verror): Update. |
| |
| * v850-tdep.c: Update calls to internal_error. |
| * utils.c: Ditto. |
| * ui-out.c: Ditto. |
| * ui-file.c: Ditto. |
| * target.h: Ditto. |
| * symtab.h: Ditto. |
| * symm-nat.c: Ditto. |
| * sparc-tdep.c: Ditto. |
| * source.c: Ditto. |
| * serial.c: Ditto. |
| * rs6000-tdep.c: Ditto. |
| * rs6000-nat.c: Ditto. |
| * remote.c: Ditto. |
| * remote-vx.c: Ditto. |
| * remote-sim.c: Ditto. |
| * remote-mips.c: Ditto. |
| * regcache.c: Ditto. |
| * objfiles.h: Ditto. |
| * objfiles.c: Ditto. |
| * mn10300-tdep.c: Ditto. |
| * mips-tdep.c: Ditto. |
| * maint.c: Ditto. |
| * m68k-tdep.c: Ditto. |
| * m3-nat.c: Ditto. |
| * language.c: Ditto. |
| * infptrace.c: Ditto. |
| * inferior.h: Ditto. |
| * infcmd.c: Ditto. |
| * ia64-tdep.c: Ditto. |
| * i386-tdep.c: Ditto. |
| * i386-linux-nat.c: Ditto. |
| * hppah-nat.c: Ditto. |
| * go32-nat.c: Ditto. |
| * findvar.c: Ditto. |
| * f-lang.c: Ditto. |
| * elfread.c: Ditto. |
| * event-loop.c: Ditto. |
| * dwarf2read.c: Ditto. |
| * dsrec.c: Ditto. |
| * d30v-tdep.c: Ditto. |
| * d10v-tdep.c: Ditto. |
| * cli/cli-setshow.c: Ditto. |
| * cli/cli-script.c: Ditto. |
| * ch-exp.c: Ditto. |
| * breakpoint.c: Ditto. |
| * ax-gdb.c: Ditto. |
| * arch-utils.c: Ditto. |
| * a29k-tdep.c: Ditto. |
| * gdb_assert.h: Ditto. |
| * gdbarch.sh: Ditto. |
| * gdbarch.h, gdbarch.c: Re-generate. |
| |
| 2001-02-07 Andrew Cagney <ac131313@redhat.com> |
| |
| From Mark Kettenis <kettenis@gnu.org>: |
| * event-top.h [!STOP_SIGNAL]: #include <signal.h>. |
| |
| 2001-02-07 Andrew Cagney <ac131313@redhat.com> |
| |
| * remote-sim.c (dump_mem): Cleanup printf format argument. |
| * MAINTAINERS: Update, mn10300-elf now builds. |
| |
| 2001-02-07 Mark Kettenis <kettenis@gnu.org> |
| |
| * event-top.c: Remove duplicate #include <signal.h>. |
| |
| 2001-02-06 Andrew Cagney <ac131313@redhat.com> |
| |
| * sol-thread.c (restore_inferior_pid): Save the PID in a freshly |
| allocated buffer. |
| (save_inferior_pid): Restore the PID from that tempoary |
| buffer. Delete the buffer. |
| * utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD. |
| |
| 2001-02-06 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Add ``The Obvious Fix Rule''. |
| |
| 2001-02-06 Andrew Cagney <ac131313@redhat.com> |
| |
| * MAINTAINERS: Add Michael Snyder to Solaris/SPARC list. |
| |
| 2001-02-06 Andrew Cagney <ac131313@cygnus.com> |
| |
| * gdbarch.sh: Include "gdb_assert.h". |
| (struct gdbarch): Change ``nr_data'' to unsigned. |
| (alloc_gdbarch_data, free_gdbarch_data): New functions. |
| (gdbarch_free): Free the data-pointer vector. Use xfree to delete |
| architecture vector. |
| (struct gdbarch_data, struct gdbarch_data_registration): Move init |
| method to gdbarch_data. Add free method, make index unsigned. |
| (struct gdbarch_data_registry): Make nr unsigned. |
| (register_gdbarch_data): Add free parameter. Store in |
| gdbarch_data. |
| (init_gdbarch_data): Use set_gdbarch_data. |
| (set_gdbarch_data): New function. |
| |
| * gdbarch.h, gdbarch.c: Re-generate. |
| |
| 2001-02-06 Michael Sokolov <msokolov@ivan.Harhan.ORG> |
| |
| * ser-unix.c (hardware_print_tty_state) [HAVE_SGTTY]: Call |
| fprintf_filtered with correct arguments. |
| |
| 2001-02-06 Michael Snyder <msnyder@makita.cygnus.com> |
| Submitted by Paul Hilfinger (hilfingr@gnat.com) |
| and Andrei Petrov (and@genesyslab.com). |
| * findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES |
| must be allocated dynamically, since these are no longer constants. |
| * infcmd.c: Ditto. |
| * regcache.c: Ditto. |
| * remote.c: Ditto. |
| * sol-thread.c: Ditto. |
| * valops.c: Ditto. |
| * config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a |
| work-around for a missing Sun header file in solaris for sparc64. |
| |
| 2001-02-04 Philip Blundell <philb@gnu.org> |
| |
| * config/arm/linux.mh (NATDEPFILES): Add proc-service.o, |
| thread-db.o, lin-lwp.o; remove lin-thread.o, linux-thread.o. |
| * config/arm/nm-linux.h (PREPARE_TO_PROCEED, ATTACH_LWP, |
| GET_THREAD_SIGNALS): Define. |
| * arm-linux-nat.c (fill_gregset): Correct type of argument. |
| (supply_gregset): Likewise. |
| (fill_fpregset): Likewise. |
| (supply_fpregset): Likewise. |
| |
| Tue Feb 6 11:58:57 2001 David Taylor <taylor@redhat.com> |
| |
| * valops.c (value_cast): If casting a scalar to a pointer, do not |
| issue a message about truncation unless it exceeds the length of |
| an address, not the length of a pointer. This is because what the |
| user gives us is an address, not a pointer, and we will ultimately |
| convert it (via ADDRESS_TO_POINTER) to a pointer, not truncate it |
| to a pointer. This allows things like "print *(int *)0x01000234" |
| to work without generating a misleading message on a target having |
| two byte pointers and four byte addresses. |
| |
| 2001-02-05 Christopher Faylor <cgf@cygnus.com> |
| |
| * win32-nat.c: Change PTR to void * throughout. |
| |
| 2001-02-05 J.T. Conklin <jtc@redback.com> |
| |
| * signals.h: Removed. |
| * event-top.c (#include <signal.h>): Changed from signals.h. |
| * inflow.c: Likewise. |
| * mac-xdep.c: Likewise. |
| * ser-pipe.c: Likewise. |
| * ser-tcp.c: Likewise. |
| * standalone.c: Likewise. |
| * top.c: Likewise. |
| * utils.c: Likewise. |
| * Makefile.in: Removed signals.h from dependencies. |
| |
| 2001-02-05 Christopher Faylor <cgf@cygnus.com> |
| |
| Change suggested by Dean Luick <luick@cray.com> |
| * inferior.h (step_over_calls_kind): Remove trailing comma from |
| last enum element. |
| (step_over_calls): Declare as extern rather than global. |
| |
| 2001-02-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com> |
| |
| * sh-tdep.c: Update copyright. |
| (sh_extract_return_value): Rewrite. |
| (sh3e_sh4_extract_return_value): New function. |
| (sh_gdbarch_init): Initialize gdbarch_extract-return_value to new |
| version of the function for sh3e and sh4 CPUs. |
| |
| 2001-02-05 Michael Chastain <chastain@redhat.com> |
| |
| * hppah-nat.c (child_xfer_memory): Add parameter 'struct mem_attrib *' |
| to conform with interface change. |
| |
| 2001-02-04 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * config/djgpp/fnchange.lst: Tweak to make consistent with the |
| new files. |
| |
| * config/djgpp/djconfig.sh: Use explicit absolute file name when |
| invoking `find'. |
| |
| * ser-go32.c (dos_write) [UART_FIFO_WORKS]: Use outportsb only if |
| UART_FIFO_WORKS is defined. Otherwise use outportb. |
| From Francisco Pastor <fpastor.etra-id@etra.es> |
| |
| * go32-nat.c (go32_xfer_memory): Make the argument list consistent |
| with target.h's `to_xfer_memory' member. |
| |
| 2001-02-02 J.T. Conklin <jtc@redback.com> |
| |
| * ppc-bdm.c (#include <signal.h>): Removed. |
| * remote-array.c: Likewise. |
| * remote-bug.c: Likewise. |
| * remote-e7000.c: Likewise. |
| * remote-mips.c: Likewise. |
| * remote-os9k.c: Likewise. |
| * remote-st.c: Likewise. |
| * remote-udi.c: Likewise. |
| * remote-vx29k.c: Likewise. |
| * remote-vx68.c: Likewise. |
| * remote-vx960.c: Likewise. |
| * remote-vxmips.c: Likewise. |
| * remote-vxsparc.c: Likewise. |
| |
| 2001-02-02 John Moore <jmoore@redhat.com> |
| |
| * remote-utils.h (sr_set_device): Changed free() to xfree() where |
| appropriate. Also changed Copyright to include 2001. |
| * symtab.h (obstack_chunk_free, SYMBOL_INIT_DEMANGLED_NAME): Likewise. |
| * value.h (value_free): Likewise. |
| * gdbarch.sh (gdbarch_free): Likewise. |
| * gdbarch.c, gdbarch.h: Regenerated. |
| |
| 2001-02-02 John Moore <jmoore@redhat.com> |
| |
| * cli/cli-cmds.c (apropos_command): Changed occurance of free() to |
| xfree(). Also changed Copyright to include 2001. |
| |
| 2001-02-02 J.T. Conklin <jtc@redback.com> |
| |
| * monitor.c (#include "gdb_wait.h"): Removed. |
| * ocd.c: Likewise. |
| * ppc-bdm.c: Likewise. |
| * remote-adapt.c: Likewise. |
| * remote-array.c: Likewise. |
| * remote-bug.c: Likewise. |
| * remote-e7000.c: Likewise. |
| * remote-eb.c: Likewise. |
| * remote-es.c: Likewise. |
| * remote-mips.c: Likewise. |
| * remote-mm.c: Likewise. |
| * remote-nindy.c: Likewise. |
| * remote-os9k.c: Likewise. |
| * remote-rdi.c: Likewise. |
| * remote-rdp.c: Likewise. |
| * remote-sds.c: Likewise. |
| * remote-sim.c: Likewise. |
| * remote-st.c: Likewise. |
| * remote-udi.c: Likewise. |
| * remote-vx.c: Likewise. |
| * remote-vx29k.c: Likewise. |
| * remote-vx68.c: Likewise. |
| * remote-vx960.c: Likewise. |
| * remote-vxmips.c: Likewise. |
| * remote-vxsparc.c: Likewise. |
| * remote.c: Likewise. |
| * ser-pipe.c: Likewise. |
| * ser-unix.c: Likewise. |
| * Makefile.in: Updated dependencies. |
| |
| 2001-01-31 David Smith <dsmith@redhat.com> |
| |
| * event-loop.c: Change inclusion of string.h to gdb_string.h and |
| updated the copyright notice. |
| * ser-pipe.c: Ditto. |
| * mi/mi-cmds.c: Ditto. |
| * mi/mi-console.c: Ditto. |
| * mi/mi-getopt.c: Ditto. |
| * mi/mi-parse.c: Ditto. |
| |
| 2001-01-31 David Smith <dsmith@redhat.com> |
| |
| * MAINTAINERS: Add David Smith to Write After Approval list. |
| |
| Tue Jan 30 15:43:08 2001 Andrew Cagney <cagney@cygnus.com> |
| |
| * cli/cli-utils.c (putchar_filtered): Move function from here. |
| * utils.c (putchar_filtered): To here. |
| * cli/cli-utils.h (putchar_filtered): Move declaration from here. |
| * defs.h (putchar_filtered): To here. |
| |
| Tue Jan 30 17:27:11 2001 Andrew Cagney <cagney@redhat.com> |
| |
| * configure.in (AC_CHECK_FUNCS): Replace vfork test with |
| AC_FUNC_VFORK macro. |
| * config.in, configure: Re-generate. |
| |
| * gdb_vfork.h: New file. |
| * ser-pipe.c (pipe_open): Update. Include "gdb_vfork.h". |
| * fork-child.c (fork_inferior): Ditto. |
| |
| Tue Jan 30 17:09:07 2001 Andrew Cagney <cagney@redhat.com> |
| |
| * defs.h (strsave): Delete declaration. |
| * utils.c (strsave): Delete definition. |
| * TODO (strsave): Update |
| |
| * mac-xdep.c (tilde_expand): Replace strsave with xstrdup. |
| * sparcl-tdep.c (sparclite_open): Ditto. |
| * mips-tdep.c (mips_set_processor_type_command): Ditto. |
| (_initialize_mips_tdep): Ditto. |
| * solib.c (solib_open): Ditto. |
| * symfile.c (add_filename_language): Ditto. |
| (set_ext_lang_command): Ditto. |
| * source.c (init_source_path): Ditto. |
| (mod_path): Ditto. |
| * sh3-rom.c (sh3_open): Ditto. |
| (sh3e_open): Ditto. |
| * serial.c (serial_open): Ditto. |
| * remote-mips.c (common_open): Ditto. |
| * monitor.c (monitor_open): Ditto. |
| * m32r-rom.c (m32r_upload_command): Ditto. |
| * infcmd.c (path_command): Ditto. |
| * f-exp.y (parse_number): Ditto. |
| * breakpoint.c (create_longjmp_breakpoint): Ditto. |
| (create_thread_event_breakpoint): Ditto. |
| * arc-tdep.c (arc_set_cpu_type_command): Ditto. |
| (_initialize_arc_tdep): Ditto. |
| |
| Tue Jan 30 15:14:26 2001 Andrew Cagney <cagney@skil> |
| |
| * cli/cli-script.c (define_command): Check for a bad hook value in |
| switch statement. |
| |
| 2001-01-30 J.T. Conklin <jtc@redback.com> |
| |
| * configure/sh/embed.mt: New file. |
| * configure/sh/linux.mt: New file. |
| * configure/sh/sh.mt: Removed. |
| * configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets. |
| (sh-*-*): Removed. |
| |
| 2001-01-29 Michael Chastain <chastain@redhat.com> |
| |
| * symtab.c (block_lookup_symbol): Use 'namespace' parameter in |
| symbol comparisons in binary search. |
| |
| 2001-01-27 Christopher Faylor <cgf@cygnus.com> |
| |
| * win32-nat.c (child_xfer_memory): Add missing argument required by |
| 2001-01-23 change. |
| |
| 2001-01-27 Mark Kettenis <kettenis@gnu.org> |
| |
| * ui-out.c (do_list_end): New function. |
| (make_cleanup_ui_out_list_end): New function. |
| * ui-out.h: Provide prototype for make_cleanup_ui_out_list_end. |
| * stack.c (print_frame) [UI_OUT]: Call |
| make_cleanup_ui_out_list_end to make sure we mark the end of the |
| list if we do a non-local exit. At the end of the function, |
| instead of calling ui_out_list_end directly, let do_cleanups |
| handle it. |
| |
| 2001-01-26 Fernando Nasser <fnasser@redhat.com> |
| |
| Fix double parsing of filenames passed as command line arguments |
| to GDB (causes weird handling of escape characters). |
| Also, remove dependencies on the CLI from libgdb. |
| * call-cmds.h: Remove declaration of exec_file_command(). |
| * gdbcore.h: Remove declaration of exec_file_command(). |
| Add declarations for exec_open() and exec_file_clear(). |
| * symfile.h: Add declarations for symbol_file_add_main() and |
| symbol_file_clear(). |
| * exec.c (exec_open): New function. Implements to_open for exec |
| targets. |
| (exec_file_clear): New function. Makes GDB forget about a previously |
| specified executable file. |
| (exec_file_attach): Move parsing of arguments from here ... |
| (exec_file_command): ... to here. |
| (init_exec_ops): Use exec_open(), not exec_file_command() to |
| implement to_open for exec targets. |
| * symfile.c (symbol_file_add_main): New function. Call symbol_file_add() |
| with default values. Used when the file name has already been parsed. |
| (symbol_file_clear): New function. Makes GDB forget about previously |
| read symbols. |
| (symbol_file_command): Call the above function instead of inline code. |
| * main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated |
| "call-cmds.h". |
| (captured_main): Call exec_file_attach() and symbol_file_add_main() |
| instead of exec_file_command() and symbol_file_command(). |
| (captured_main): Add comment. |
| * corefile.c: Include "symfile.h". |
| (core_file_command): Call symbol_file_add_main() instead of |
| symbol_file_command(). |
| (reopen_exec_file): Call exec_open() instead of exec_file_command(). |
| * infcmd.c: Include "symfile.h". |
| (attach_command): Call symbol_file_add_main() instead of |
| symbol_file_command(). |
| * infrun.c: Remove comment about the inclusion of "symfile.h", |
| not any longer appropriate. |
| (follow_exec): Call symbol_file_add_main() instead of |
| symbol_file_command(). |
| * remote-es.c: Include "symfile.h". |
| (es1800_load): Call symbol_file_add_main() instead of |
| symbol_file_command(). |
| * remote-vx.c: Remove comment about the inclusion of "symfile.h", |
| not any longer appropriate. |
| (vx-wait): Call symbol_file_add_main() instead of |
| symbol_file_command(). |
| * solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main() |
| instead of symbol_file_command(). |
| * v850ice.c (ice_file): Call exec_open(), exec_file_attach() and |
| symbol_file_add_main() instead of exec_file_command() and |
| symbol_file_command(). |
| * Makefile.in: Update dependencies. |
| |
| 2001-01-26 Jeff Holcomb <jeffh@redhat.com> |
| |
| * remote-udi.c (udi_open): Change strdup to xstrdup. |
| * thread.c (thread_apply_all_command): Change strdup to xstrdup. |
| Update copyright message. |
| * varobj.c (delete_variable_1): Likewise. |
| |
| * gdb_string.h: Remove declaration of strdup. Update copyright |
| message. |
| * config/xm-mpw.h: Likewise. |
| * config/i386/xm-i386mach.h: Likewise. |
| * config/m68k/xm-apollo68b.h: Likewise. |
| * config/m68k/xm-hp300bsd.h: Likewise. |
| * config/rs6000/xm-rs6000.h: Likewise. |
| * config/vax/xm-vaxult.h: Remove declaration of strdup. |
| * config/vax/xm-vaxult2.h: Likewise. |
| |
| 2001-01-26 Jeff Holcomb <jeffh@redhat.com> |
| |
| * MAINTAINERS: Add Jeff Holcomb to Write After Approval list. |
| |
| 2001-01-25 J.T. Conklin <jtc@redback.com> |
| |
| * target.c (target_xfer_memory_partial): Return -1 on failure due |
| to invalid access mode attribute. |
| |
| 2001-01-25 Christopher Faylor <cgf@cygnus.com> |
| |
| * win32-nat.c (_initialize_core_win32): Prototype correctly. |
| |
| 2001-01-25 Mark Kettenis <kettenis@gnu.org> |
| |
| * config/alpha/tm-fbsd.h: Update copyright. |
| (USE_STRUCT_CONVENTION): Define in terms of |
| alphabsd_use_struct_convention. |
| * config/alpha/fbsd.mt (TDEPFILES): Add alphafbsd-tdep.c. |
| * alphafbsd-tdep.c: New file. |
| |
| 2001-01-24 Fernando Nasser <fnasser@redhat.com> |
| |
| * top.c (print_gdb_version): Update Copyright year. |
| |
| 2001-01-24 J.T. Conklin <jtc@redback.com> |
| |
| * dcache.c (dcache_write_line): Fix typo. |
| |
| * memattr.c (delete_mem_region): Replace free() with xfree(). |
| (mem_number): Add explicit type. |
| |
| * sol-thread.c (sol_thread_xfer_memory): Add attrib argument. |
| (rw_common): Likewise. |
| |
| 2001-01-24 Fernando Nasser <fnasser@redhat.com> |
| |
| * infcmd.c (get_inferior_args, set_inferior_args): Accessor functions |
| for the inferior program arguments. |
| (run_command, run_no_args_command, init_infcmd)): Use accessor |
| functions to set the inferior program arguments. |
| * inferior.h: Add definitions to the accessor functions above. |
| |
| 2001-01-23 Jim Blandy <jimb@redhat.com> |
| |
| * dwarf2read.c (read_tag_const_type, read_tag_volatile_type): |
| Implement these correctly, using make_cv_type. |
| |
| 2001-01-23 J.T. Conklin <jtc@redback.com> |
| |
| * exec.c (xfer_memory): Add attrib argument. |
| * infptrace.c (child_xfer_memory): Likewise. |
| * lin-lwp.c (lin_lwp_xfer_memory): Likewise. |
| * monitor.c (monitor_xfer_memory): Likewise. |
| * remote-adapt.c (adapt_xfer_inferior_memory): Likewise. |
| * remote-array.c (array_xfer_memory): Likewise. |
| * remote-bug.c (bug_xfer_memory): Likewise. |
| * remote-e7000.c (e7000_xfer_inferior_memory): Likewise. |
| * remote-eb.c (eb_xfer_inferior_memory): Likewise. |
| * remote-es.c (es1800_xfer_inferior_memory): Likewise. |
| * remote-mips.c (mips_xfer_memory): Likewise. |
| * remote-mm.c (mm_xfer_inferior_memory): Likewise. |
| * remote-nindy.c (nindy_xfer_inferior_memory): Likewise. |
| * remote-os9k.c (rombug_xfer_inferior_memory): Likewise. |
| * remote-rdi.c (arm_rdi_xfer_memory): Likewise. |
| * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise. |
| * remote-sds.c (sds_xfer_memory): Likewise. |
| * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise. |
| * remote-st.c (st2000_xfer_inferior_memory): Likewise. |
| * remote-udi.c (udi_xfer_inferior_memory): Likewise. |
| * remote-vx.c (vx_xfer_memory): Likewise. |
| * remote.c (remote_xfer_memory): Likewise. |
| * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise. |
| * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise. |
| * thread-db.c (thread_db_xfer_memory): Likewise. |
| |
| * target.h (#include "memattr.h"): Added. |
| (target_ops.to_xfer_memory): Add attrib argument. |
| |
| * wince.c (_initialize_inftarg): Removed call to set_dcache_state. |
| * dcache.h (set_dcache_state): Removed declaration. |
| * dcache.c (set_dcache_state): Removed definition |
| |
| * dcache.c: Update module comment, as dcache is now enabled and |
| disabled with memory region attributes instead of by the global |
| variable "remotecache". Add comment describing the interaction |
| between dcache and memory region attributes. |
| (dcache_xfer_memory): Add comment describing benefits of moving |
| cache writeback to a higher level. |
| (dcache_struct): Removed cache_has_stuff field. This was used to |
| record whether the cache had been accessed in order to invalidate |
| it when it was disabled. However, this is not needed because the |
| cache is write through and the code that enables, disables, and |
| deletes memory regions invalidate the cache. Add comment which |
| suggests that we could be more selective and only invalidate those |
| cache lines containing data from those memory regions. |
| (dcache_invalidate): Updated. |
| (dcache_xfer_memory): Updated. |
| |
| (dcache_alloc): Don't abort() if dcache_enabled_p is clear. |
| (dcache_xfer_memory): Removed code that called do_xfer_memory() to |
| perform a uncached transfer if dcache_enabled_p was clear. This |
| function is now only called if caching is enabled for the memory |
| region. |
| (dcache_info): Always print cache info. |
| |
| * target.c (do_xfer_memory): Add attrib argument. |
| (target_xfer_memory, target_xfer_memory_partial): Break transfer |
| into chunks defined by memory regions, pass region attributes to |
| do_xfer_memory(). |
| * dcache.c (dcache_read_line, dcache_write_line): Likewise. |
| |
| * Makefile.in (SFILES): Add memattr.c. |
| (COMMON_OBS): Add memattr.o. |
| (dcache.o): Add target.h to dependencies. |
| * memattr.c: New file. |
| * memattr.h: Likewise. |
| |
| * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a. |
| * config/mips/vr5000.mt (GDBSERVER_LIBS): Likewise. |
| * config/tic80/tic80.mt (GDBSERVER_LIBS): Likewise. |
| * gdbserver/low-sim.c (#include "defs.h"): Removed. |
| (mygeneric_load): Rename from generic_load. |
| |
| * gdbserver/low-hppabsd.c (#include "server.h"): Added. |
| (#include "defs.h"): Removed. |
| (inferior_pid, perror_with_name): Remove declarations. |
| * gdbserver/low-linux.c: Likewise. |
| * gdbserver/low-nbsd.c: Likewise. |
| * gdbserver/low-sparc.c: Likewise. |
| * gdbserver/low-sun3.c: Likewise. |
| |
| * i386-stub.c: Re-indent. |
| * m68k-stub.c: Re-indent. |
| |
| 2001-01-22 Nicholas Duffek <nsd@redhat.com> |
| |
| * gdbarch.sh (PARM_BOUNDARY): Define. |
| * gdbarch.c: Regenerate. |
| * gdbarch.h: Regenerate. |
| |
| 2001-01-22 J.T. Conklin <jtc@redback.com> |
| |
| * ns32k-tdep.c: #include "frame.h" |
| * config/ns32k/tm-umax.h (FRAME_FIND_SAVED_REGS): Restore. It |
| appears to have been inadvertantly removed sometime in May 1999. |
| |
| * Revert 2000-11-09 changes where shared library objects were |
| moved from NATDEPFILES to TDEPFILES on NetBSD targets. While |
| we'd like to be able to debug dynamically linked executables, |
| this makes it impossible to build a cross debugger on a many |
| hosts. |
| |
| * config/i386/nbsd.mt: Remove solib.o, solib-svr4.o from TDEPFILES. |
| * config/i386/nbsdelf.mt: Likewise. |
| * config/m68k/nbsd.mt: Likewise. |
| * config/ns32k/nbsd.mt: Likewise. |
| * config/powerpc/nbsd.mt: Likewise. |
| * config/sparc/nbsd.mt: Likewise. |
| * config/sparc/nbsdelf.mt: Likewise. |
| * config/i386/nbsd.mh: Add solib.o, solib-svr4.o to NATDEPFILES. |
| * config/i386/nbsdelf.mh: Likewise. |
| * config/m68k/nbsd.mh: Likewise. |
| * config/ns32k/nbsd.mh: Likewise. |
| * config/powerpc/nbsd.mh: Likewise. |
| * config/sparc/nbsd.mh: Likewise. |
| |
| 2001-01-19 Jason Merrill <jason@redhat.com> |
| |
| * dbxread.c (read_ofile_symtab): Stay with AUTO_DEMANGLING for G++. |
| (process_one_symbol): Likewise. |
| * dwarfread.c (handle_producer): Likewise. |
| |
| Thu Jan 18 12:08:57 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (build_warnings): Disable -Wuninitialized until GDB |
| compiles with -Wuninitialized,-Werror. |
| * configure: Regenerate. |
| |
| * MAINTAINERS: Add list of buildable targets. |
| |
| Thu Jan 18 12:48:04 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * defs.h (STRCMP): Delete macro. |
| |
| * objfiles.c (objfile_relocate): Replace STRCMP with call to |
| strcmp. |
| * symtab.c (lookup_partial_symbol, lookup_block_symbol): Ditto. |
| * symfile.c (compare_symbols): Ditto. |
| * standalone.c (open): Ditto. |
| * remote-es.c (verify_break): Ditto. |
| * cli/cli-decode.c (add_cmd, add_show_from_set): Ditto. |
| |
| * symfile.c (compare_psymbols): Delete comment refering to STRCMP. |
| |
| Thu Jan 18 12:25:06 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * varobj.c (FREEIF): Delete macro. |
| (varobj_set_value, free_variable): Replace FREEIF with ``xfree'' |
| call. |
| |
| 2001-01-18 Nick Clifton <nickc@redhat.com> |
| |
| * arc-tdep.c (arc_cpu_type_table): Add new arc core numbers. |
| (arc_print_insn): No bfd available, so pass NULL to |
| arc_get_disassembler. |
| |
| 2001-01-09 James Ingham <jingham@inghji.apple.com> |
| |
| * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux to lookup |
| a mangled symbol rather than recursing into lookup_symbol, since |
| this will just re-unmangle the name & call lookup_symbol_aux - |
| leading to an infinite recursion. |
| |
| 2001-01-18 Mark Kettenis <kettenis@gnu.org> |
| |
| * infcmd.c (print_return_value): Restore another space lost by |
| switch to UIOUT. ``$NN='' should be ``$NN =''. |
| |
| Fri Jan 19 02:31:40 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * target.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT) |
| * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Wrap macro |
| definition in parenthesis. |
| |
| Fri Jan 19 02:13:40 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| From 2000-10-27 Mark Salter <msalter@redhat.com>: |
| * remote.c (remote_remove_hw_breakpoint): Add 'len' field to Z |
| packet. |
| (remote_insert_hw_breakpoint): Ditto. |
| |
| 2001-01-17 J.T. Conklin <jtc@redback.com> |
| |
| * config/m68k/tm-nbsd.h (USE_STRUCT_CONVENTION): Define. |
| (BPT_VECTOR, REMOTE_BPT_VECTOR): Change to 0xf. |
| * config/m68k/nbsd.mt (TDEPFILES): Add m68knbsd-tdep.o. |
| * m68knbsd-tdep.c: New file. |
| |
| * i386nbsd-tdep.c: Remove #if 0'd out #includes. |
| |
| * m68knbsd-nat.c: #include gdbcore.h. |
| |
| Wed Jan 17 09:41:58 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * MAINTAINERS: Add J.T. Conklin to Blanket Write Privs. |
| |
| 2001-01-16 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * procfs.c (procfs_stopped_by_watchpoint): Don't die if process |
| goes away -- just return false (ie. not stopped by watchpoint). |
| * source.c (openp): Fix typo in comment. |
| |
| 2001-01-12 Nicholas Duffek <nsd@redhat.com> |
| |
| * blockframe.c (generic_get_saved_register): Spelling fix. |
| * frame.h (FRAME_FP): Spelling fix. |
| |
| Fri Jan 12 18:29:46 2001 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * infcmd.c (print_return_value): Restore space lost by switch to |
| UIOUT. ``$NN='' should be ``$NN =''. |
| |
| 2001-01-08 Nicholas Duffek <nsd@redhat.com> |
| |
| * regcache.c (set_register_cached, register_buffer, |
| real_register, pseudo_register fetch_register, store_register): |
| New functions. |
| (register_changed, read_relative_register_raw_bytes_for_frame, |
| registers_changed, registers_fetched, read_register_bytes, |
| read_register_gen, write_register_gen, read_register, |
| read_signed_register, write_register, supply_register): Replace |
| register_valid[] with register_cached() and |
| set_register_cached(). |
| (read_register_bytes, read_register_gen, write_register_gen, |
| read_register, read_signed_register, write_register, |
| supply_register): Replace registers[] with register_buffer(). |
| (read_register_bytes, read_register_gen, read_register, |
| read_signed_register): Call fetch_register(). |
| (write_register_gen, write_register): Call real_register() and |
| store_register(). |
| (write_register_bytes): Call store_register(). |
| * value.h (set_register_cached, register_buffer): Prototype. |
| * remote.c (remote_fetch_registers): Allocate regs[] with a |
| run-time size. Replace register_valid[] with |
| set_register_cached(). |
| (store_register_using_P, remote_store_registers): Replace |
| registers[] with register_buffer(). |
| |
| 2001-01-08 Nicholas Duffek <nsd@redhat.com> |
| |
| * regcache.c: Change "write-back" comment to "write-through". |
| Change "regno" to "regnum". |
| (read_register, read_signed_register): Remove "raw" from return |
| value description. |
| (supply_register): Spelling fix. |
| * value.h: Change "regno" to "regnum". |
| |
| 2001-01-08 Fernando Nasser <fnasser@redhat.com> |
| |
| * Makefile.in (install-gdbtk): Add .itcl files to the list of files |
| to be installed. |
| |
| 2001-01-04 Michael Snyder <msnyder@mvstp600e.cygnus.com> |
| |
| * mips-tdep.c (mips_coerce_float_to_double): Fix typo in comment. |
| |
| 2001-01-04 Nicholas Duffek <nsd@redhat.com> |
| |
| * valops.c (VALUE_SUBSTRING_START): Delete. |
| |
| 2001-01-04 Nicholas Duffek <nsd@redhat.com> |
| |
| * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o. |
| (SUBDIR_CLI_SRCS): Add cli/cli-utils.c. |
| (cli_utils_h): New variable. |
| (cli/cli-utils.o): New rule. |
| * cli/cli-utils.c: New file. |
| * cli/cli-utils.h: New file. |
| |
| 2001-01-04 Nicholas Duffek <nsd@redhat.com> |
| |
| * config/i386/tm-i386.h (REGISTER_CONVERT_TO_VIRTUAL, |
| REGISTER_CONVERT_TO_RAW): Delete trailing semicolon. |
| |
| 2001-01-03 J.T. Conklin <jtc@redback.com> |
| |
| * alphabsd-nat.c, i386-linux-nat.c, i386bsd-nat.c: Fix typo in |
| comment. |
| |
| 2001-01-02 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * sh-tdep.c (sh_default_store_return_value): Allow for small return type. |
| (sh3e_sh4_store_return_value): Call sh_default_store_return_value for |
| non-float types. |
| * sparc-tdep.c (sparc_frame_chain): Fix typo in comment. |
| Update copyright notice. |
| |
| For older changes see ChangeLog-2000 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |