| # Copyright 1999 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # |
| # Test essential Machine interface (MI) operations |
| # |
| # Verify that, using the MI, we can run a simple program and perform basic |
| # debugging activities like: insert breakpoints, run the program, |
| # step, next, continue until it ends and, last but not least, quit. |
| # |
| # The goal is not to test gdb functionality, which is done by other tests, |
| # but to verify the correct output response to MI operations. |
| # |
| |
| load_lib mi-support.exp |
| set MIFLAGS "-i=mi0" |
| |
| gdb_exit |
| if [mi_gdb_start] { |
| continue |
| } |
| |
| set testfile "basics" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/${testfile} |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| mi_delete_breakpoints |
| mi_gdb_reinitialize_dir $srcdir/$subdir |
| mi_gdb_load ${binfile} |
| |
| proc test_tbreak_creation_and_listing {} { |
| global mi_gdb_prompt |
| global srcfile |
| global hex |
| |
| # Insert some breakpoints and list them |
| # Also, disable some so they do not interfere with other tests |
| # Tests: |
| # -break-insert -t main |
| # -break-insert -t basics.c:callee2 |
| # -break-insert -t basics.c:15 |
| # -break-insert -t srcfile:6 |
| # -break-list |
| |
| mi_gdb_test "222-break-insert -t main" \ |
| "222\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\}" \ |
| "break-insert -t operation" |
| |
| mi_gdb_test "333-break-insert -t basics.c:callee2" \ |
| "333\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"callee2\",file=\".*basics.c\",line=\"22\",times=\"0\"\}" \ |
| "insert temp breakpoint at basics.c:callee2" |
| |
| mi_gdb_test "444-break-insert -t basics.c:15" \ |
| "444\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"callee3\",file=\".*basics.c\",line=\"15\",times=\"0\"\}" \ |
| "insert temp breakpoint at basics.c:15 (callee3)" |
| |
| # Getting the quoting right is tricky. That is "\"<file>\":6" |
| mi_gdb_test "555-break-insert -t \"\\\"${srcfile}\\\":6\"" \ |
| "555\\^done,bkpt=\{number=\"4\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"callee4\",file=\".*basics.c\",line=\"6\",times=\"0\"\}" \ |
| "insert temp breakpoint at \"<fullfilename>\":6 (callee4)" |
| |
| mi_gdb_test "666-break-list" \ |
| "666\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\},.*\}\}" \ |
| "list of breakpoints" |
| |
| mi_gdb_test "777-break-delete" \ |
| "777\\^done" \ |
| "delete temp breakpoints" |
| } |
| |
| proc test_rbreak_creation_and_listing {} { |
| global mi_gdb_prompt |
| global srcfile |
| global hex |
| |
| # Insert some breakpoints and list them |
| # Also, disable some so they do not interfere with other tests |
| # Tests: |
| # -break-insert -r main |
| # -break-insert -r callee2 |
| # -break-insert -r callee |
| # -break-insert -r .*llee |
| # -break-list |
| |
| setup_xfail "*-*-*" |
| mi_gdb_test "122-break-insert -r main" \ |
| "122\\^done,bkpt=\{number=\"5\",addr=\"$hex\",file=\".*basics.c\",line=\"32\"\}" \ |
| "break-insert -r operation" |
| |
| setup_xfail "*-*-*" |
| mi_gdb_test "133-break-insert -r callee2" \ |
| "133\\^done,bkpt=\{number=\"6\",addr=\"$hex\",file=\".*basics.c\",line=\"22\"\}" \ |
| "insert breakpoint with regexp callee2" |
| |
| setup_xfail "*-*-*" |
| mi_gdb_test "144-break-insert -r callee" \ |
| "144\\^done,bkpt=\{number=\"7\",addr=\"$hex\",file=\".*basics.c\",line=\"27\"\},bkpt=\{number=\"8\",addr=\"$hex\",file=\".*basics.c\",line=\"22\"\},bkpt=\{number=\"9\",addr=\"$hex\",file=\".*basics.c\",line=\"17\"\},bkpt=\{number=\"10\",addr=\"$hex\",file=\".*basics.c\",line=\"8\"\}" \ |
| "insert breakpoint with regexp callee" |
| |
| setup_xfail "*-*-*" |
| mi_gdb_test "155-break-insert -r \.\*llee" \ |
| "155\\^done,bkpt=\{number=\"11\",addr=\"$hex\",file=\".*basics.c\",line=\"27\"\},bkpt=\{number=\"12\",addr=\"$hex\",file=\".*basics.c\",line=\"22\"\},bkpt=\{number=\"13\",addr=\"$hex\",file=\".*basics.c\",line=\"17\"\},bkpt=\{number=\"14\",addr=\"$hex\",file=\".*basics.c\",line=\"8\"\}" \ |
| "insert breakpoint with regexp .*llee" |
| |
| setup_xfail "*-*-*" |
| mi_gdb_test "166-break-list" \ |
| "166\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"5\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\},.*\}\}" \ |
| "list of breakpoints" |
| |
| mi_gdb_test "177-break-delete" \ |
| "177\\^done" \ |
| "delete temp breakpoints" |
| } |
| |
| test_tbreak_creation_and_listing |
| test_rbreak_creation_and_listing |
| |
| mi_gdb_exit |
| return 0 |